ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2)
* Add ->mwdma_mask and ->swdma_mask to ide_pci_device_t.
* Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in
setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and ->init_hwif
method may still override them).
* Convert IDE PCI host drivers to use ide_pci_device_t DMA masks.
While at it:
* Use ATA_{UDMA,MWDMA,SWDMA}* defines.
* hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345.
* serverworks.c: fix DMA masks being set before checking DMA base.
v2:
* Add missing masks to DECLARE_GENERIC_PCI_DEV() macro.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 1c52cb6..4906f00 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -201,9 +201,6 @@
if (hwif->dma_base == 0)
return;
- hwif->ultra_mask = hwif->cds->udma_mask;
- hwif->mwdma_mask = 0x07;
-
hwif->dma_lost_irq = &aec62xx_dma_lost_irq;
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
@@ -247,7 +244,8 @@
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
- .udma_mask = 0x07, /* udma0-2 */
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
},{ /* 1 */
.name = "AEC6260",
.init_setup = init_setup_aec62xx,
@@ -256,7 +254,8 @@
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
- .udma_mask = 0x1f, /* udma0-4 */
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
},{ /* 2 */
.name = "AEC6260R",
.init_setup = init_setup_aec62xx,
@@ -265,7 +264,8 @@
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_NO_ATAPI_DMA,
.pio_mask = ATA_PIO4,
- .udma_mask = 0x1f, /* udma0-4 */
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
},{ /* 3 */
.name = "AEC6280",
.init_setup = init_setup_aec6x80,
@@ -273,7 +273,8 @@
.init_hwif = init_hwif_aec62xx,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
- .udma_mask = 0x3f, /* udma0-5 */
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
},{ /* 4 */
.name = "AEC6280R",
.init_setup = init_setup_aec6x80,
@@ -282,7 +283,8 @@
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
- .udma_mask = 0x3f, /* udma0-5 */
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
}
};