i2c: Add bus recovery infrastructure
Add i2c bus recovery infrastructure to i2c adapters as specified in the i2c
protocol Rev. 03 section 3.1.16 titled "Bus clear".
http://www.nxp.com/documents/user_manual/UM10204.pdf
Sometimes during operation i2c bus hangs and we need to give dummy clocks to
slave device to start the transfer again. Now we may have capability in the bus
controller to generate these clocks or platform may have gpio pins which can be
toggled to generate dummy clocks. This patch supports both.
This patch also adds in generic bus recovery routines gpio or scl line based
which can be used by bus controller. In addition controller driver may provide
its own version of the bus recovery routine.
This doesn't support multi-master recovery for now.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[wsa: changed gpio type to int and minor reformatting]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index d0c4db7..2eca386 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -370,6 +370,45 @@
u32 (*functionality) (struct i2c_adapter *);
};
+/**
+ * struct i2c_bus_recovery_info - I2C bus recovery information
+ * @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or
+ * i2c_generic_scl_recovery() or i2c_generic_gpio_recovery().
+ * @get_scl: This gets current value of SCL line. Mandatory for generic SCL
+ * recovery. Used internally for generic GPIO recovery.
+ * @set_scl: This sets/clears SCL line. Mandatory for generic SCL recovery. Used
+ * internally for generic GPIO recovery.
+ * @get_sda: This gets current value of SDA line. Optional for generic SCL
+ * recovery. Used internally, if sda_gpio is a valid GPIO, for generic GPIO
+ * recovery.
+ * @prepare_recovery: This will be called before starting recovery. Platform may
+ * configure padmux here for SDA/SCL line or something else they want.
+ * @unprepare_recovery: This will be called after completing recovery. Platform
+ * may configure padmux here for SDA/SCL line or something else they want.
+ * @scl_gpio: gpio number of the SCL line. Only required for GPIO recovery.
+ * @sda_gpio: gpio number of the SDA line. Only required for GPIO recovery.
+ */
+struct i2c_bus_recovery_info {
+ int (*recover_bus)(struct i2c_adapter *);
+
+ int (*get_scl)(struct i2c_adapter *);
+ void (*set_scl)(struct i2c_adapter *, int val);
+ int (*get_sda)(struct i2c_adapter *);
+
+ void (*prepare_recovery)(struct i2c_bus_recovery_info *bri);
+ void (*unprepare_recovery)(struct i2c_bus_recovery_info *bri);
+
+ /* gpio recovery */
+ int scl_gpio;
+ int sda_gpio;
+};
+
+int i2c_recover_bus(struct i2c_adapter *adap);
+
+/* Generic recovery routines */
+int i2c_generic_gpio_recovery(struct i2c_adapter *adap);
+int i2c_generic_scl_recovery(struct i2c_adapter *adap);
+
/*
* i2c_adapter is the structure used to identify a physical i2c bus along
* with the access algorithms necessary to access it.
@@ -393,6 +432,8 @@
struct mutex userspace_clients_lock;
struct list_head userspace_clients;
+
+ struct i2c_bus_recovery_info *bus_recovery_info;
};
#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)