drm/amd/powerplay: Add thermal protection support for Fiji.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile b/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile
index 269fd82..b664e34 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile
@@ -8,7 +8,7 @@
tonga_processpptables.o ppatomctrl.o \
tonga_hwmgr.o pppcielanes.o tonga_thermal.o\
fiji_powertune.o fiji_hwmgr.o tonga_clockpowergating.o \
- fiji_clockpowergating.o
+ fiji_clockpowergating.o fiji_thermal.o
AMD_PP_HWMGR = $(addprefix $(AMD_PP_PATH)/hwmgr/,$(HARDWARE_MGR))
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c
index 00d2e17..8de045f 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c
@@ -50,8 +50,11 @@
#include "pp_debug.h"
#include "pp_acpi.h"
#include "amd_pcie_helpers.h"
+#include "cgs_linux.h"
+#include "ppinterrupt.h"
#include "fiji_clockpowergating.h"
+#include "fiji_thermal.h"
#define VOLTAGE_SCALE 4
#define SMC_RAM_END 0x40000
@@ -694,6 +697,31 @@
hwmgr->platform_descriptor.hardwarePerformanceLevels = 2;
hwmgr->platform_descriptor.minimumClocksReductionPercentage = 50;
+ phm_cap_set(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_FanSpeedInTableIsRPM);
+
+ if (table_info->cac_dtp_table->usDefaultTargetOperatingTemp &&
+ hwmgr->thermal_controller.
+ advanceFanControlParameters.ucFanControlMode) {
+ hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanPWM =
+ hwmgr->thermal_controller.advanceFanControlParameters.usDefaultMaxFanPWM;
+ hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanRPM =
+ hwmgr->thermal_controller.advanceFanControlParameters.usDefaultMaxFanRPM;
+ hwmgr->dyn_state.cac_dtp_table->usOperatingTempMinLimit =
+ table_info->cac_dtp_table->usOperatingTempMinLimit;
+ hwmgr->dyn_state.cac_dtp_table->usOperatingTempMaxLimit =
+ table_info->cac_dtp_table->usOperatingTempMaxLimit;
+ hwmgr->dyn_state.cac_dtp_table->usDefaultTargetOperatingTemp =
+ table_info->cac_dtp_table->usDefaultTargetOperatingTemp;
+ hwmgr->dyn_state.cac_dtp_table->usOperatingTempStep =
+ table_info->cac_dtp_table->usOperatingTempStep;
+ hwmgr->dyn_state.cac_dtp_table->usTargetOperatingTemp =
+ table_info->cac_dtp_table->usTargetOperatingTemp;
+
+ phm_cap_set(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_ODFuzzyFanControlSupport);
+ }
+
sys_info.size = sizeof(struct cgs_system_info);
sys_info.info_id = CGS_SYSTEM_INFO_PCIE_GEN_INFO;
result = cgs_query_system_info(hwmgr->device, &sys_info);
@@ -4915,6 +4943,108 @@
return fiji_program_display_gap(hwmgr);
}
+static int fiji_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr,
+ uint16_t us_max_fan_pwm)
+{
+ hwmgr->thermal_controller.
+ advanceFanControlParameters.usMaxFanPWM = us_max_fan_pwm;
+
+ if (phm_is_hw_access_blocked(hwmgr))
+ return 0;
+
+ return smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+ PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm);
+}
+
+static int fiji_set_max_fan_rpm_output(struct pp_hwmgr *hwmgr,
+ uint16_t us_max_fan_rpm)
+{
+ hwmgr->thermal_controller.
+ advanceFanControlParameters.usMaxFanRPM = us_max_fan_rpm;
+
+ if (phm_is_hw_access_blocked(hwmgr))
+ return 0;
+
+ return smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+ PPSMC_MSG_SetFanRpmMax, us_max_fan_rpm);
+}
+
+int fiji_dpm_set_interrupt_state(void *private_data,
+ unsigned src_id, unsigned type,
+ int enabled)
+{
+ uint32_t cg_thermal_int;
+ struct pp_hwmgr *hwmgr = ((struct pp_eventmgr *)private_data)->hwmgr;
+
+ if (hwmgr == NULL)
+ return -EINVAL;
+
+ switch (type) {
+ case AMD_THERMAL_IRQ_LOW_TO_HIGH:
+ if (enabled) {
+ cg_thermal_int = cgs_read_ind_register(hwmgr->device,
+ CGS_IND_REG__SMC, ixCG_THERMAL_INT);
+ cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
+ cgs_write_ind_register(hwmgr->device,
+ CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
+ } else {
+ cg_thermal_int = cgs_read_ind_register(hwmgr->device,
+ CGS_IND_REG__SMC, ixCG_THERMAL_INT);
+ cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
+ cgs_write_ind_register(hwmgr->device,
+ CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
+ }
+ break;
+
+ case AMD_THERMAL_IRQ_HIGH_TO_LOW:
+ if (enabled) {
+ cg_thermal_int = cgs_read_ind_register(hwmgr->device,
+ CGS_IND_REG__SMC, ixCG_THERMAL_INT);
+ cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
+ cgs_write_ind_register(hwmgr->device,
+ CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
+ } else {
+ cg_thermal_int = cgs_read_ind_register(hwmgr->device,
+ CGS_IND_REG__SMC, ixCG_THERMAL_INT);
+ cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
+ cgs_write_ind_register(hwmgr->device,
+ CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int);
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+int fiji_register_internal_thermal_interrupt(struct pp_hwmgr *hwmgr,
+ const void *thermal_interrupt_info)
+{
+ int result;
+ const struct pp_interrupt_registration_info *info =
+ (const struct pp_interrupt_registration_info *)
+ thermal_interrupt_info;
+
+ if (info == NULL)
+ return -EINVAL;
+
+ result = cgs_add_irq_source(hwmgr->device, 230, AMD_THERMAL_IRQ_LAST,
+ fiji_dpm_set_interrupt_state,
+ info->call_back, info->context);
+
+ if (result)
+ return -EINVAL;
+
+ result = cgs_add_irq_source(hwmgr->device, 231, AMD_THERMAL_IRQ_LAST,
+ fiji_dpm_set_interrupt_state,
+ info->call_back, info->context);
+
+ if (result)
+ return -EINVAL;
+
+ return 0;
+}
+
static const struct pp_hwmgr_func fiji_hwmgr_funcs = {
.backend_init = &fiji_hwmgr_backend_init,
.backend_fini = &tonga_hwmgr_backend_fini,
@@ -4936,6 +5066,18 @@
.notify_smc_display_config_after_ps_adjustment =
&tonga_notify_smc_display_config_after_ps_adjustment,
.display_config_changed = &fiji_display_configuration_changed_task,
+ .set_max_fan_pwm_output = fiji_set_max_fan_pwm_output,
+ .set_max_fan_rpm_output = fiji_set_max_fan_rpm_output,
+ .get_temperature = fiji_thermal_get_temperature,
+ .stop_thermal_controller = fiji_thermal_stop_thermal_controller,
+ .get_fan_speed_info = fiji_fan_ctrl_get_fan_speed_info,
+ .get_fan_speed_percent = fiji_fan_ctrl_get_fan_speed_percent,
+ .set_fan_speed_percent = fiji_fan_ctrl_set_fan_speed_percent,
+ .reset_fan_speed_to_default = fiji_fan_ctrl_reset_fan_speed_to_default,
+ .get_fan_speed_rpm = fiji_fan_ctrl_get_fan_speed_rpm,
+ .set_fan_speed_rpm = fiji_fan_ctrl_set_fan_speed_rpm,
+ .uninitialize_thermal_controller = fiji_thermal_ctrl_uninitialize_thermal_controller,
+ .register_internal_thermal_interrupt = fiji_register_internal_thermal_interrupt,
};
int fiji_hwmgr_init(struct pp_hwmgr *hwmgr)
@@ -4950,5 +5092,6 @@
hwmgr->backend = data;
hwmgr->hwmgr_func = &fiji_hwmgr_funcs;
hwmgr->pptable_func = &tonga_pptable_funcs;
+ pp_fiji_thermal_initialize(hwmgr);
return ret;
}
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_thermal.c
new file mode 100644
index 0000000..1b2eaa9
--- /dev/null
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_thermal.c
@@ -0,0 +1,687 @@
+/*
+ * Copyright 2015 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include "fiji_thermal.h"
+#include "fiji_hwmgr.h"
+#include "fiji_smumgr.h"
+#include "fiji_ppsmc.h"
+#include "smu/smu_7_1_3_d.h"
+#include "smu/smu_7_1_3_sh_mask.h"
+
+int fiji_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr,
+ struct phm_fan_speed_info *fan_speed_info)
+{
+
+ if (hwmgr->thermal_controller.fanInfo.bNoFan)
+ return 0;
+
+ fan_speed_info->supports_percent_read = true;
+ fan_speed_info->supports_percent_write = true;
+ fan_speed_info->min_percent = 0;
+ fan_speed_info->max_percent = 100;
+
+ if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_FanSpeedInTableIsRPM) &&
+ hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) {
+ fan_speed_info->supports_rpm_read = true;
+ fan_speed_info->supports_rpm_write = true;
+ fan_speed_info->min_rpm = hwmgr->thermal_controller.fanInfo.ulMinRPM;
+ fan_speed_info->max_rpm = hwmgr->thermal_controller.fanInfo.ulMaxRPM;
+ } else {
+ fan_speed_info->min_rpm = 0;
+ fan_speed_info->max_rpm = 0;
+ }
+
+ return 0;
+}
+
+int fiji_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr,
+ uint32_t *speed)
+{
+ uint32_t duty100;
+ uint32_t duty;
+ uint64_t tmp64;
+
+ if (hwmgr->thermal_controller.fanInfo.bNoFan)
+ return 0;
+
+ duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL1, FMAX_DUTY100);
+ duty = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_THERMAL_STATUS, FDO_PWM_DUTY);
+
+ if (duty100 == 0)
+ return -EINVAL;
+
+
+ tmp64 = (uint64_t)duty * 100;
+ do_div(tmp64, duty100);
+ *speed = (uint32_t)tmp64;
+
+ if (*speed > 100)
+ *speed = 100;
+
+ return 0;
+}
+
+int fiji_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
+{
+ uint32_t tach_period;
+ uint32_t crystal_clock_freq;
+
+ if (hwmgr->thermal_controller.fanInfo.bNoFan ||
+ (hwmgr->thermal_controller.fanInfo.
+ ucTachometerPulsesPerRevolution == 0))
+ return 0;
+
+ tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_TACH_STATUS, TACH_PERIOD);
+
+ if (tach_period == 0)
+ return -EINVAL;
+
+ crystal_clock_freq = tonga_get_xclk(hwmgr);
+
+ *speed = 60 * crystal_clock_freq * 10000/ tach_period;
+
+ return 0;
+}
+
+/**
+* Set Fan Speed Control to static mode, so that the user can decide what speed to use.
+* @param hwmgr the address of the powerplay hardware manager.
+* mode the fan control mode, 0 default, 1 by percent, 5, by RPM
+* @exception Should always succeed.
+*/
+int fiji_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
+{
+
+ if (hwmgr->fan_ctrl_is_in_default_mode) {
+ hwmgr->fan_ctrl_default_mode =
+ PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL2, FDO_PWM_MODE);
+ hwmgr->tmin =
+ PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL2, TMIN);
+ hwmgr->fan_ctrl_is_in_default_mode = false;
+ }
+
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL2, TMIN, 0);
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL2, FDO_PWM_MODE, mode);
+
+ return 0;
+}
+
+/**
+* Reset Fan Speed Control to default mode.
+* @param hwmgr the address of the powerplay hardware manager.
+* @exception Should always succeed.
+*/
+int fiji_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
+{
+ if (hwmgr->fan_ctrl_is_in_default_mode) {
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL2, FDO_PWM_MODE, hwmgr->fan_ctrl_default_mode);
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL2, TMIN, hwmgr->tmin);
+ hwmgr->fan_ctrl_is_in_default_mode = true;
+ }
+
+ return 0;
+}
+
+int fiji_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr)
+{
+ int result;
+
+ if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_ODFuzzyFanControlSupport)) {
+ cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_FUZZY);
+ result = smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl);
+
+ if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_FanSpeedInTableIsRPM))
+ hwmgr->hwmgr_func->set_max_fan_rpm_output(hwmgr,
+ hwmgr->thermal_controller.
+ advanceFanControlParameters.usMaxFanRPM);
+ else
+ hwmgr->hwmgr_func->set_max_fan_pwm_output(hwmgr,
+ hwmgr->thermal_controller.
+ advanceFanControlParameters.usMaxFanPWM);
+
+ } else {
+ cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_TABLE);
+ result = smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl);
+ }
+
+ if (!result && hwmgr->thermal_controller.
+ advanceFanControlParameters.ucTargetTemperature)
+ result = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+ PPSMC_MSG_SetFanTemperatureTarget,
+ hwmgr->thermal_controller.
+ advanceFanControlParameters.ucTargetTemperature);
+
+ return result;
+}
+
+
+int fiji_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
+{
+ return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StopFanControl);
+}
+
+/**
+* Set Fan Speed in percent.
+* @param hwmgr the address of the powerplay hardware manager.
+* @param speed is the percentage value (0% - 100%) to be set.
+* @exception Fails is the 100% setting appears to be 0.
+*/
+int fiji_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
+ uint32_t speed)
+{
+ uint32_t duty100;
+ uint32_t duty;
+ uint64_t tmp64;
+
+ if (hwmgr->thermal_controller.fanInfo.bNoFan)
+ return 0;
+
+ if (speed > 100)
+ speed = 100;
+
+ if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_MicrocodeFanControl))
+ fiji_fan_ctrl_stop_smc_fan_control(hwmgr);
+
+ duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL1, FMAX_DUTY100);
+
+ if (duty100 == 0)
+ return -EINVAL;
+
+ tmp64 = (uint64_t)speed * 100;
+ do_div(tmp64, duty100);
+ duty = (uint32_t)tmp64;
+
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL0, FDO_STATIC_DUTY, duty);
+
+ return fiji_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+}
+
+/**
+* Reset Fan Speed to default.
+* @param hwmgr the address of the powerplay hardware manager.
+* @exception Always succeeds.
+*/
+int fiji_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
+{
+ int result;
+
+ if (hwmgr->thermal_controller.fanInfo.bNoFan)
+ return 0;
+
+ if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_MicrocodeFanControl)) {
+ result = fiji_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+ if (!result)
+ result = fiji_fan_ctrl_start_smc_fan_control(hwmgr);
+ } else
+ result = fiji_fan_ctrl_set_default_mode(hwmgr);
+
+ return result;
+}
+
+/**
+* Set Fan Speed in RPM.
+* @param hwmgr the address of the powerplay hardware manager.
+* @param speed is the percentage value (min - max) to be set.
+* @exception Fails is the speed not lie between min and max.
+*/
+int fiji_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
+{
+ uint32_t tach_period;
+ uint32_t crystal_clock_freq;
+
+ if (hwmgr->thermal_controller.fanInfo.bNoFan ||
+ (hwmgr->thermal_controller.fanInfo.
+ ucTachometerPulsesPerRevolution == 0) ||
+ (speed < hwmgr->thermal_controller.fanInfo.ulMinRPM) ||
+ (speed > hwmgr->thermal_controller.fanInfo.ulMaxRPM))
+ return 0;
+
+ crystal_clock_freq = tonga_get_xclk(hwmgr);
+
+ tach_period = 60 * crystal_clock_freq * 10000 / (8 * speed);
+
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_TACH_STATUS, TACH_PERIOD, tach_period);
+
+ return fiji_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+}
+
+/**
+* Reads the remote temperature from the SIslands thermal controller.
+*
+* @param hwmgr The address of the hardware manager.
+*/
+int fiji_thermal_get_temperature(struct pp_hwmgr *hwmgr)
+{
+ int temp;
+
+ temp = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_MULT_THERMAL_STATUS, CTF_TEMP);
+
+ /* Bit 9 means the reading is lower than the lowest usable value. */
+ if (temp & 0x200)
+ temp = FIJI_THERMAL_MAXIMUM_TEMP_READING;
+ else
+ temp = temp & 0x1ff;
+
+ temp *= PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
+
+ return temp;
+}
+
+/**
+* Set the requested temperature range for high and low alert signals
+*
+* @param hwmgr The address of the hardware manager.
+* @param range Temperature range to be programmed for high and low alert signals
+* @exception PP_Result_BadInput if the input data is not valid.
+*/
+static int fiji_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
+ uint32_t low_temp, uint32_t high_temp)
+{
+ uint32_t low = FIJI_THERMAL_MINIMUM_ALERT_TEMP *
+ PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
+ uint32_t high = FIJI_THERMAL_MAXIMUM_ALERT_TEMP *
+ PP_TEMPERATURE_UNITS_PER_CENTIGRADES;
+
+ if (low < low_temp)
+ low = low_temp;
+ if (high > high_temp)
+ high = high_temp;
+
+ if (low > high)
+ return -EINVAL;
+
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_THERMAL_INT, DIG_THERM_INTH,
+ (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_THERMAL_INT, DIG_THERM_INTL,
+ (low / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_THERMAL_CTRL, DIG_THERM_DPM,
+ (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES));
+
+ return 0;
+}
+
+/**
+* Programs thermal controller one-time setting registers
+*
+* @param hwmgr The address of the hardware manager.
+*/
+static int fiji_thermal_initialize(struct pp_hwmgr *hwmgr)
+{
+ if (hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_TACH_CTRL, EDGE_PER_REV,
+ hwmgr->thermal_controller.fanInfo.
+ ucTachometerPulsesPerRevolution - 1);
+
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL2, TACH_PWM_RESP_RATE, 0x28);
+
+ return 0;
+}
+
+/**
+* Enable thermal alerts on the RV770 thermal controller.
+*
+* @param hwmgr The address of the hardware manager.
+*/
+static int fiji_thermal_enable_alert(struct pp_hwmgr *hwmgr)
+{
+ uint32_t alert;
+
+ alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_THERMAL_INT, THERM_INT_MASK);
+ alert &= ~(FIJI_THERMAL_HIGH_ALERT_MASK | FIJI_THERMAL_LOW_ALERT_MASK);
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_THERMAL_INT, THERM_INT_MASK, alert);
+
+ /* send message to SMU to enable internal thermal interrupts */
+ return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Enable);
+}
+
+/**
+* Disable thermal alerts on the RV770 thermal controller.
+* @param hwmgr The address of the hardware manager.
+*/
+static int fiji_thermal_disable_alert(struct pp_hwmgr *hwmgr)
+{
+ uint32_t alert;
+
+ alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_THERMAL_INT, THERM_INT_MASK);
+ alert |= (FIJI_THERMAL_HIGH_ALERT_MASK | FIJI_THERMAL_LOW_ALERT_MASK);
+ PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_THERMAL_INT, THERM_INT_MASK, alert);
+
+ /* send message to SMU to disable internal thermal interrupts */
+ return smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Disable);
+}
+
+/**
+* Uninitialize the thermal controller.
+* Currently just disables alerts.
+* @param hwmgr The address of the hardware manager.
+*/
+int fiji_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
+{
+ int result = fiji_thermal_disable_alert(hwmgr);
+
+ if (hwmgr->thermal_controller.fanInfo.bNoFan)
+ fiji_fan_ctrl_set_default_mode(hwmgr);
+
+ return result;
+}
+
+/**
+* Set up the fan table to control the fan using the SMC.
+* @param hwmgr the address of the powerplay hardware manager.
+* @param pInput the pointer to input data
+* @param pOutput the pointer to output data
+* @param pStorage the pointer to temporary storage
+* @param Result the last failure code
+* @return result from set temperature range routine
+*/
+int tf_fiji_thermal_setup_fan_table(struct pp_hwmgr *hwmgr,
+ void *input, void *output, void *storage, int result)
+{
+ struct fiji_hwmgr *data = (struct fiji_hwmgr *)(hwmgr->backend);
+ SMU73_Discrete_FanTable fan_table = { FDO_MODE_HARDWARE };
+ uint32_t duty100;
+ uint32_t t_diff1, t_diff2, pwm_diff1, pwm_diff2;
+ uint16_t fdo_min, slope1, slope2;
+ uint32_t reference_clock;
+ int res;
+ uint64_t tmp64;
+
+ if (data->fan_table_start == 0) {
+ phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_MicrocodeFanControl);
+ return 0;
+ }
+
+ duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC,
+ CG_FDO_CTRL1, FMAX_DUTY100);
+
+ if (duty100 == 0) {
+ phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_MicrocodeFanControl);
+ return 0;
+ }
+
+ tmp64 = hwmgr->thermal_controller.advanceFanControlParameters.
+ usPWMMin * duty100;
+ do_div(tmp64, 10000);
+ fdo_min = (uint16_t)tmp64;
+
+ t_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usTMed -
+ hwmgr->thermal_controller.advanceFanControlParameters.usTMin;
+ t_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usTHigh -
+ hwmgr->thermal_controller.advanceFanControlParameters.usTMed;
+
+ pwm_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed -
+ hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin;
+ pwm_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMHigh -
+ hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed;
+
+ slope1 = (uint16_t)((50 + ((16 * duty100 * pwm_diff1) / t_diff1)) / 100);
+ slope2 = (uint16_t)((50 + ((16 * duty100 * pwm_diff2) / t_diff2)) / 100);
+
+ fan_table.TempMin = cpu_to_be16((50 + hwmgr->
+ thermal_controller.advanceFanControlParameters.usTMin) / 100);
+ fan_table.TempMed = cpu_to_be16((50 + hwmgr->
+ thermal_controller.advanceFanControlParameters.usTMed) / 100);
+ fan_table.TempMax = cpu_to_be16((50 + hwmgr->
+ thermal_controller.advanceFanControlParameters.usTMax) / 100);
+
+ fan_table.Slope1 = cpu_to_be16(slope1);
+ fan_table.Slope2 = cpu_to_be16(slope2);
+
+ fan_table.FdoMin = cpu_to_be16(fdo_min);
+
+ fan_table.HystDown = cpu_to_be16(hwmgr->
+ thermal_controller.advanceFanControlParameters.ucTHyst);
+
+ fan_table.HystUp = cpu_to_be16(1);
+
+ fan_table.HystSlope = cpu_to_be16(1);
+
+ fan_table.TempRespLim = cpu_to_be16(5);
+
+ reference_clock = tonga_get_xclk(hwmgr);
+
+ fan_table.RefreshPeriod = cpu_to_be32((hwmgr->
+ thermal_controller.advanceFanControlParameters.ulCycleDelay *
+ reference_clock) / 1600);
+
+ fan_table.FdoMax = cpu_to_be16((uint16_t)duty100);
+
+ fan_table.TempSrc = (uint8_t)PHM_READ_VFPF_INDIRECT_FIELD(
+ hwmgr->device, CGS_IND_REG__SMC,
+ CG_MULT_THERMAL_CTRL, TEMP_SEL);
+
+ res = fiji_copy_bytes_to_smc(hwmgr->smumgr, data->fan_table_start,
+ (uint8_t *)&fan_table, (uint32_t)sizeof(fan_table),
+ data->sram_end);
+
+ if (!res && hwmgr->thermal_controller.
+ advanceFanControlParameters.ucMinimumPWMLimit)
+ res = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+ PPSMC_MSG_SetFanMinPwm,
+ hwmgr->thermal_controller.
+ advanceFanControlParameters.ucMinimumPWMLimit);
+
+ if (!res && hwmgr->thermal_controller.
+ advanceFanControlParameters.ulMinFanSCLKAcousticLimit)
+ res = smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+ PPSMC_MSG_SetFanSclkTarget,
+ hwmgr->thermal_controller.
+ advanceFanControlParameters.ulMinFanSCLKAcousticLimit);
+
+ if (res)
+ phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_MicrocodeFanControl);
+
+ return 0;
+}
+
+/**
+* Start the fan control on the SMC.
+* @param hwmgr the address of the powerplay hardware manager.
+* @param pInput the pointer to input data
+* @param pOutput the pointer to output data
+* @param pStorage the pointer to temporary storage
+* @param Result the last failure code
+* @return result from set temperature range routine
+*/
+int tf_fiji_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr,
+ void *input, void *output, void *storage, int result)
+{
+/* If the fantable setup has failed we could have disabled
+ * PHM_PlatformCaps_MicrocodeFanControl even after
+ * this function was included in the table.
+ * Make sure that we still think controlling the fan is OK.
+*/
+ if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
+ PHM_PlatformCaps_MicrocodeFanControl)) {
+ fiji_fan_ctrl_start_smc_fan_control(hwmgr);
+ fiji_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC);
+ }
+
+ return 0;
+}
+
+/**
+* Set temperature range for high and low alerts
+* @param hwmgr the address of the powerplay hardware manager.
+* @param pInput the pointer to input data
+* @param pOutput the pointer to output data
+* @param pStorage the pointer to temporary storage
+* @param Result the last failure code
+* @return result from set temperature range routine
+*/
+int tf_fiji_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
+ void *input, void *output, void *storage, int result)
+{
+ struct PP_TemperatureRange *range = (struct PP_TemperatureRange *)input;
+
+ if (range == NULL)
+ return -EINVAL;
+
+ return fiji_thermal_set_temperature_range(hwmgr, range->min, range->max);
+}
+
+/**
+* Programs one-time setting registers
+* @param hwmgr the address of the powerplay hardware manager.
+* @param pInput the pointer to input data
+* @param pOutput the pointer to output data
+* @param pStorage the pointer to temporary storage
+* @param Result the last failure code
+* @return result from initialize thermal controller routine
+*/
+int tf_fiji_thermal_initialize(struct pp_hwmgr *hwmgr,
+ void *input, void *output, void *storage, int result)
+{
+ return fiji_thermal_initialize(hwmgr);
+}
+
+/**
+* Enable high and low alerts
+* @param hwmgr the address of the powerplay hardware manager.
+* @param pInput the pointer to input data
+* @param pOutput the pointer to output data
+* @param pStorage the pointer to temporary storage
+* @param Result the last failure code
+* @return result from enable alert routine
+*/
+int tf_fiji_thermal_enable_alert(struct pp_hwmgr *hwmgr,
+ void *input, void *output, void *storage, int result)
+{
+ return fiji_thermal_enable_alert(hwmgr);
+}
+
+/**
+* Disable high and low alerts
+* @param hwmgr the address of the powerplay hardware manager.
+* @param pInput the pointer to input data
+* @param pOutput the pointer to output data
+* @param pStorage the pointer to temporary storage
+* @param Result the last failure code
+* @return result from disable alert routine
+*/
+static int tf_fiji_thermal_disable_alert(struct pp_hwmgr *hwmgr,
+ void *input, void *output, void *storage, int result)
+{
+ return fiji_thermal_disable_alert(hwmgr);
+}
+
+static struct phm_master_table_item
+fiji_thermal_start_thermal_controller_master_list[] = {
+ {NULL, tf_fiji_thermal_initialize},
+ {NULL, tf_fiji_thermal_set_temperature_range},
+ {NULL, tf_fiji_thermal_enable_alert},
+/* We should restrict performance levels to low before we halt the SMC.
+ * On the other hand we are still in boot state when we do this
+ * so it would be pointless.
+ * If this assumption changes we have to revisit this table.
+ */
+ {NULL, tf_fiji_thermal_setup_fan_table},
+ {NULL, tf_fiji_thermal_start_smc_fan_control},
+ {NULL, NULL}
+};
+
+static struct phm_master_table_header
+fiji_thermal_start_thermal_controller_master = {
+ 0,
+ PHM_MasterTableFlag_None,
+ fiji_thermal_start_thermal_controller_master_list
+};
+
+static struct phm_master_table_item
+fiji_thermal_set_temperature_range_master_list[] = {
+ {NULL, tf_fiji_thermal_disable_alert},
+ {NULL, tf_fiji_thermal_set_temperature_range},
+ {NULL, tf_fiji_thermal_enable_alert},
+ {NULL, NULL}
+};
+
+struct phm_master_table_header
+fiji_thermal_set_temperature_range_master = {
+ 0,
+ PHM_MasterTableFlag_None,
+ fiji_thermal_set_temperature_range_master_list
+};
+
+int fiji_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr)
+{
+ if (!hwmgr->thermal_controller.fanInfo.bNoFan)
+ fiji_fan_ctrl_set_default_mode(hwmgr);
+ return 0;
+}
+
+/**
+* Initializes the thermal controller related functions in the Hardware Manager structure.
+* @param hwmgr The address of the hardware manager.
+* @exception Any error code from the low-level communication.
+*/
+int pp_fiji_thermal_initialize(struct pp_hwmgr *hwmgr)
+{
+ int result;
+
+ result = phm_construct_table(hwmgr,
+ &fiji_thermal_set_temperature_range_master,
+ &(hwmgr->set_temperature_range));
+
+ if (!result) {
+ result = phm_construct_table(hwmgr,
+ &fiji_thermal_start_thermal_controller_master,
+ &(hwmgr->start_thermal_controller));
+ if (result)
+ phm_destroy_table(hwmgr, &(hwmgr->set_temperature_range));
+ }
+
+ if (!result)
+ hwmgr->fan_ctrl_is_in_default_mode = true;
+ return result;
+}
+
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_thermal.h b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_thermal.h
new file mode 100644
index 0000000..c3ee552
--- /dev/null
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_thermal.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2015 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef FIJI_THERMAL_H
+#define FIJI_THERMAL_H
+
+#include "hwmgr.h"
+
+#define FIJI_THERMAL_HIGH_ALERT_MASK 0x1
+#define FIJI_THERMAL_LOW_ALERT_MASK 0x2
+
+#define FIJI_THERMAL_MINIMUM_TEMP_READING -256
+#define FIJI_THERMAL_MAXIMUM_TEMP_READING 255
+
+#define FIJI_THERMAL_MINIMUM_ALERT_TEMP 0
+#define FIJI_THERMAL_MAXIMUM_ALERT_TEMP 255
+
+#define FDO_PWM_MODE_STATIC 1
+#define FDO_PWM_MODE_STATIC_RPM 5
+
+
+extern int tf_fiji_thermal_initialize(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
+extern int tf_fiji_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
+extern int tf_fiji_thermal_enable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result);
+
+extern int fiji_thermal_get_temperature(struct pp_hwmgr *hwmgr);
+extern int fiji_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr);
+extern int fiji_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info);
+extern int fiji_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t *speed);
+extern int fiji_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr);
+extern int fiji_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode);
+extern int fiji_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t speed);
+extern int fiji_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr);
+extern int pp_fiji_thermal_initialize(struct pp_hwmgr *hwmgr);
+extern int fiji_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr);
+extern int fiji_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed);
+extern int fiji_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed);
+extern uint32_t tonga_get_xclk(struct pp_hwmgr *hwmgr);
+
+#endif
+