| /* |
| * in2000.h - Linux device driver definitions for the |
| * Always IN2000 ISA SCSI card. |
| * |
| * IMPORTANT: This file is for version 1.33 - 26/Aug/1998 |
| * |
| * Copyright (c) 1996 John Shifflett, GeoLog Consulting |
| * john@geolog.com |
| * jshiffle@netcom.com |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #ifndef IN2000_H |
| #define IN2000_H |
| |
| #include <asm/io.h> |
| |
| #define PROC_INTERFACE /* add code for /proc/scsi/in2000/xxx interface */ |
| #ifdef PROC_INTERFACE |
| #define PROC_STATISTICS /* add code for keeping various real time stats */ |
| #endif |
| |
| #define SYNC_DEBUG /* extra info on sync negotiation printed */ |
| #define DEBUGGING_ON /* enable command-line debugging bitmask */ |
| #define DEBUG_DEFAULTS 0 /* default bitmask - change from command-line */ |
| |
| #ifdef __i386__ |
| #define FAST_READ_IO /* No problems with these on my machine */ |
| #define FAST_WRITE_IO |
| #endif |
| |
| #ifdef DEBUGGING_ON |
| #define DB(f,a) if (hostdata->args & (f)) a; |
| #define CHECK_NULL(p,s) /* if (!(p)) {printk("\n"); while (1) printk("NP:%s\r",(s));} */ |
| #else |
| #define DB(f,a) |
| #define CHECK_NULL(p,s) |
| #endif |
| |
| #define uchar unsigned char |
| |
| #define read1_io(a) (inb(hostdata->io_base+(a))) |
| #define read2_io(a) (inw(hostdata->io_base+(a))) |
| #define write1_io(b,a) (outb((b),hostdata->io_base+(a))) |
| #define write2_io(w,a) (outw((w),hostdata->io_base+(a))) |
| |
| #ifdef __i386__ |
| /* These inline assembly defines are derived from a patch |
| * sent to me by Bill Earnest. He's done a lot of very |
| * valuable thinking, testing, and coding during his effort |
| * to squeeze more speed out of this driver. I really think |
| * that we are doing IO at close to the maximum now with |
| * the fifo. (And yes, insw uses 'edi' while outsw uses |
| * 'esi'. Thanks Bill!) |
| */ |
| |
| #define FAST_READ2_IO() \ |
| ({ \ |
| int __dummy_1,__dummy_2; \ |
| __asm__ __volatile__ ("\n \ |
| cld \n \ |
| orl %%ecx, %%ecx \n \ |
| jz 1f \n \ |
| rep \n \ |
| insw (%%dx),%%es:(%%edi) \n \ |
| 1: " \ |
| : "=D" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2) /* output */ \ |
| : "2" (f), "0" (sp), "1" (i) /* input */ \ |
| ); /* trashed */ \ |
| }) |
| |
| #define FAST_WRITE2_IO() \ |
| ({ \ |
| int __dummy_1,__dummy_2; \ |
| __asm__ __volatile__ ("\n \ |
| cld \n \ |
| orl %%ecx, %%ecx \n \ |
| jz 1f \n \ |
| rep \n \ |
| outsw %%ds:(%%esi),(%%dx) \n \ |
| 1: " \ |
| : "=S" (sp) ,"=c" (__dummy_1) ,"=d" (__dummy_2)/* output */ \ |
| : "2" (f), "0" (sp), "1" (i) /* input */ \ |
| ); /* trashed */ \ |
| }) |
| #endif |
| |
| /* IN2000 io_port offsets */ |
| #define IO_WD_ASR 0x00 /* R - 3393 auxstat reg */ |
| #define ASR_INT 0x80 |
| #define ASR_LCI 0x40 |
| #define ASR_BSY 0x20 |
| #define ASR_CIP 0x10 |
| #define ASR_PE 0x02 |
| #define ASR_DBR 0x01 |
| #define IO_WD_ADDR 0x00 /* W - 3393 address reg */ |
| #define IO_WD_DATA 0x01 /* R/W - rest of 3393 regs */ |
| #define IO_FIFO 0x02 /* R/W - in2000 dual-port fifo (16 bits) */ |
| #define IN2000_FIFO_SIZE 2048 /* fifo capacity in bytes */ |
| #define IO_CARD_RESET 0x03 /* W - in2000 start master reset */ |
| #define IO_FIFO_COUNT 0x04 /* R - in2000 fifo counter */ |
| #define IO_FIFO_WRITE 0x05 /* W - clear fifo counter, start write */ |
| #define IO_FIFO_READ 0x07 /* W - start fifo read */ |
| #define IO_LED_OFF 0x08 /* W - turn off in2000 activity LED */ |
| #define IO_SWITCHES 0x08 /* R - read in2000 dip switch */ |
| #define SW_ADDR0 0x01 /* bit 0 = bit 0 of index to io addr */ |
| #define SW_ADDR1 0x02 /* bit 1 = bit 1 of index io addr */ |
| #define SW_DISINT 0x04 /* bit 2 true if ints disabled */ |
| #define SW_INT0 0x08 /* bit 3 = bit 0 of index to interrupt */ |
| #define SW_INT1 0x10 /* bit 4 = bit 1 of index to interrupt */ |
| #define SW_INT_SHIFT 3 /* shift right this amount to right justify int bits */ |
| #define SW_SYNC_DOS5 0x20 /* bit 5 used by Always BIOS */ |
| #define SW_FLOPPY 0x40 /* bit 6 true if floppy enabled */ |
| #define SW_BIT7 0x80 /* bit 7 hardwired true (ground) */ |
| #define IO_LED_ON 0x09 /* W - turn on in2000 activity LED */ |
| #define IO_HARDWARE 0x0a /* R - read in2000 hardware rev, stop reset */ |
| #define IO_INTR_MASK 0x0c /* W - in2000 interrupt mask reg */ |
| #define IMASK_WD 0x01 /* WD33c93 interrupt mask */ |
| #define IMASK_FIFO 0x02 /* FIFO interrupt mask */ |
| |
| /* wd register names */ |
| #define WD_OWN_ID 0x00 |
| #define WD_CONTROL 0x01 |
| #define WD_TIMEOUT_PERIOD 0x02 |
| #define WD_CDB_1 0x03 |
| #define WD_CDB_2 0x04 |
| #define WD_CDB_3 0x05 |
| #define WD_CDB_4 0x06 |
| #define WD_CDB_5 0x07 |
| #define WD_CDB_6 0x08 |
| #define WD_CDB_7 0x09 |
| #define WD_CDB_8 0x0a |
| #define WD_CDB_9 0x0b |
| #define WD_CDB_10 0x0c |
| #define WD_CDB_11 0x0d |
| #define WD_CDB_12 0x0e |
| #define WD_TARGET_LUN 0x0f |
| #define WD_COMMAND_PHASE 0x10 |
| #define WD_SYNCHRONOUS_TRANSFER 0x11 |
| #define WD_TRANSFER_COUNT_MSB 0x12 |
| #define WD_TRANSFER_COUNT 0x13 |
| #define WD_TRANSFER_COUNT_LSB 0x14 |
| #define WD_DESTINATION_ID 0x15 |
| #define WD_SOURCE_ID 0x16 |
| #define WD_SCSI_STATUS 0x17 |
| #define WD_COMMAND 0x18 |
| #define WD_DATA 0x19 |
| #define WD_QUEUE_TAG 0x1a |
| #define WD_AUXILIARY_STATUS 0x1f |
| |
| /* WD commands */ |
| #define WD_CMD_RESET 0x00 |
| #define WD_CMD_ABORT 0x01 |
| #define WD_CMD_ASSERT_ATN 0x02 |
| #define WD_CMD_NEGATE_ACK 0x03 |
| #define WD_CMD_DISCONNECT 0x04 |
| #define WD_CMD_RESELECT 0x05 |
| #define WD_CMD_SEL_ATN 0x06 |
| #define WD_CMD_SEL 0x07 |
| #define WD_CMD_SEL_ATN_XFER 0x08 |
| #define WD_CMD_SEL_XFER 0x09 |
| #define WD_CMD_RESEL_RECEIVE 0x0a |
| #define WD_CMD_RESEL_SEND 0x0b |
| #define WD_CMD_WAIT_SEL_RECEIVE 0x0c |
| #define WD_CMD_TRANS_ADDR 0x18 |
| #define WD_CMD_TRANS_INFO 0x20 |
| #define WD_CMD_TRANSFER_PAD 0x21 |
| #define WD_CMD_SBT_MODE 0x80 |
| |
| /* SCSI Bus Phases */ |
| #define PHS_DATA_OUT 0x00 |
| #define PHS_DATA_IN 0x01 |
| #define PHS_COMMAND 0x02 |
| #define PHS_STATUS 0x03 |
| #define PHS_MESS_OUT 0x06 |
| #define PHS_MESS_IN 0x07 |
| |
| /* Command Status Register definitions */ |
| |
| /* reset state interrupts */ |
| #define CSR_RESET 0x00 |
| #define CSR_RESET_AF 0x01 |
| |
| /* successful completion interrupts */ |
| #define CSR_RESELECT 0x10 |
| #define CSR_SELECT 0x11 |
| #define CSR_SEL_XFER_DONE 0x16 |
| #define CSR_XFER_DONE 0x18 |
| |
| /* paused or aborted interrupts */ |
| #define CSR_MSGIN 0x20 |
| #define CSR_SDP 0x21 |
| #define CSR_SEL_ABORT 0x22 |
| #define CSR_RESEL_ABORT 0x25 |
| #define CSR_RESEL_ABORT_AM 0x27 |
| #define CSR_ABORT 0x28 |
| |
| /* terminated interrupts */ |
| #define CSR_INVALID 0x40 |
| #define CSR_UNEXP_DISC 0x41 |
| #define CSR_TIMEOUT 0x42 |
| #define CSR_PARITY 0x43 |
| #define CSR_PARITY_ATN 0x44 |
| #define CSR_BAD_STATUS 0x45 |
| #define CSR_UNEXP 0x48 |
| |
| /* service required interrupts */ |
| #define CSR_RESEL 0x80 |
| #define CSR_RESEL_AM 0x81 |
| #define CSR_DISC 0x85 |
| #define CSR_SRV_REQ 0x88 |
| |
| /* Own ID/CDB Size register */ |
| #define OWNID_EAF 0x08 |
| #define OWNID_EHP 0x10 |
| #define OWNID_RAF 0x20 |
| #define OWNID_FS_8 0x00 |
| #define OWNID_FS_12 0x40 |
| #define OWNID_FS_16 0x80 |
| |
| /* Control register */ |
| #define CTRL_HSP 0x01 |
| #define CTRL_HA 0x02 |
| #define CTRL_IDI 0x04 |
| #define CTRL_EDI 0x08 |
| #define CTRL_HHP 0x10 |
| #define CTRL_POLLED 0x00 |
| #define CTRL_BURST 0x20 |
| #define CTRL_BUS 0x40 |
| #define CTRL_DMA 0x80 |
| |
| /* Timeout Period register */ |
| #define TIMEOUT_PERIOD_VALUE 20 /* results in 200 ms. */ |
| |
| /* Synchronous Transfer Register */ |
| #define STR_FSS 0x80 |
| |
| /* Destination ID register */ |
| #define DSTID_DPD 0x40 |
| #define DATA_OUT_DIR 0 |
| #define DATA_IN_DIR 1 |
| #define DSTID_SCC 0x80 |
| |
| /* Source ID register */ |
| #define SRCID_MASK 0x07 |
| #define SRCID_SIV 0x08 |
| #define SRCID_DSP 0x20 |
| #define SRCID_ES 0x40 |
| #define SRCID_ER 0x80 |
| |
| |
| |
| #define ILLEGAL_STATUS_BYTE 0xff |
| |
| |
| #define DEFAULT_SX_PER 500 /* (ns) fairly safe */ |
| #define DEFAULT_SX_OFF 0 /* aka async */ |
| |
| #define OPTIMUM_SX_PER 252 /* (ns) best we can do (mult-of-4) */ |
| #define OPTIMUM_SX_OFF 12 /* size of in2000 fifo */ |
| |
| struct sx_period { |
| unsigned int period_ns; |
| uchar reg_value; |
| }; |
| |
| |
| struct IN2000_hostdata { |
| struct Scsi_Host *next; |
| uchar chip; /* what kind of wd33c93 chip? */ |
| uchar microcode; /* microcode rev if 'B' */ |
| unsigned short io_base; /* IO port base */ |
| unsigned int dip_switch; /* dip switch settings */ |
| unsigned int hrev; /* hardware revision of card */ |
| volatile uchar busy[8]; /* index = target, bit = lun */ |
| volatile Scsi_Cmnd *input_Q; /* commands waiting to be started */ |
| volatile Scsi_Cmnd *selecting; /* trying to select this command */ |
| volatile Scsi_Cmnd *connected; /* currently connected command */ |
| volatile Scsi_Cmnd *disconnected_Q;/* commands waiting for reconnect */ |
| uchar state; /* what we are currently doing */ |
| uchar fifo; /* what the FIFO is up to */ |
| uchar level2; /* extent to which Level-2 commands are used */ |
| uchar disconnect; /* disconnect/reselect policy */ |
| unsigned int args; /* set from command-line argument */ |
| uchar incoming_msg[8]; /* filled during message_in phase */ |
| int incoming_ptr; /* mainly used with EXTENDED messages */ |
| uchar outgoing_msg[8]; /* send this during next message_out */ |
| int outgoing_len; /* length of outgoing message */ |
| unsigned int default_sx_per; /* default transfer period for SCSI bus */ |
| uchar sync_xfer[8]; /* sync_xfer reg settings per target */ |
| uchar sync_stat[8]; /* status of sync negotiation per target */ |
| uchar sync_off; /* bit mask: don't use sync with these targets */ |
| #ifdef PROC_INTERFACE |
| uchar proc; /* bit mask: what's in proc output */ |
| #ifdef PROC_STATISTICS |
| unsigned long cmd_cnt[8]; /* # of commands issued per target */ |
| unsigned long int_cnt; /* # of interrupts serviced */ |
| unsigned long disc_allowed_cnt[8]; /* # of disconnects allowed per target */ |
| unsigned long disc_done_cnt[8]; /* # of disconnects done per target*/ |
| #endif |
| #endif |
| }; |
| |
| |
| /* defines for hostdata->chip */ |
| |
| #define C_WD33C93 0 |
| #define C_WD33C93A 1 |
| #define C_WD33C93B 2 |
| #define C_UNKNOWN_CHIP 100 |
| |
| /* defines for hostdata->state */ |
| |
| #define S_UNCONNECTED 0 |
| #define S_SELECTING 1 |
| #define S_RUNNING_LEVEL2 2 |
| #define S_CONNECTED 3 |
| #define S_PRE_TMP_DISC 4 |
| #define S_PRE_CMP_DISC 5 |
| |
| /* defines for hostdata->fifo */ |
| |
| #define FI_FIFO_UNUSED 0 |
| #define FI_FIFO_READING 1 |
| #define FI_FIFO_WRITING 2 |
| |
| /* defines for hostdata->level2 */ |
| /* NOTE: only the first 3 are trustworthy at this point - |
| * having trouble when more than 1 device is reading/writing |
| * at the same time... |
| */ |
| |
| #define L2_NONE 0 /* no combination commands - we get lots of ints */ |
| #define L2_SELECT 1 /* start with SEL_ATN_XFER, but never resume it */ |
| #define L2_BASIC 2 /* resume after STATUS ints & RDP messages */ |
| #define L2_DATA 3 /* resume after DATA_IN/OUT ints */ |
| #define L2_MOST 4 /* resume after anything except a RESELECT int */ |
| #define L2_RESELECT 5 /* resume after everything, including RESELECT ints */ |
| #define L2_ALL 6 /* always resume */ |
| |
| /* defines for hostdata->disconnect */ |
| |
| #define DIS_NEVER 0 |
| #define DIS_ADAPTIVE 1 |
| #define DIS_ALWAYS 2 |
| |
| /* defines for hostdata->args */ |
| |
| #define DB_TEST 1<<0 |
| #define DB_FIFO 1<<1 |
| #define DB_QUEUE_COMMAND 1<<2 |
| #define DB_EXECUTE 1<<3 |
| #define DB_INTR 1<<4 |
| #define DB_TRANSFER 1<<5 |
| #define DB_MASK 0x3f |
| |
| #define A_NO_SCSI_RESET 1<<15 |
| |
| |
| /* defines for hostdata->sync_xfer[] */ |
| |
| #define SS_UNSET 0 |
| #define SS_FIRST 1 |
| #define SS_WAITING 2 |
| #define SS_SET 3 |
| |
| /* defines for hostdata->proc */ |
| |
| #define PR_VERSION 1<<0 |
| #define PR_INFO 1<<1 |
| #define PR_STATISTICS 1<<2 |
| #define PR_CONNECTED 1<<3 |
| #define PR_INPUTQ 1<<4 |
| #define PR_DISCQ 1<<5 |
| #define PR_TEST 1<<6 |
| #define PR_STOP 1<<7 |
| |
| |
| # include <linux/init.h> |
| # include <linux/spinlock.h> |
| # define in2000__INITFUNC(function) __initfunc(function) |
| # define in2000__INIT __init |
| # define in2000__INITDATA __initdata |
| # define CLISPIN_LOCK(host,flags) spin_lock_irqsave(host->host_lock, flags) |
| # define CLISPIN_UNLOCK(host,flags) spin_unlock_irqrestore(host->host_lock, \ |
| flags) |
| |
| static int in2000_detect(struct scsi_host_template *) in2000__INIT; |
| static int in2000_queuecommand(struct Scsi_Host *, struct scsi_cmnd *); |
| static int in2000_abort(Scsi_Cmnd *); |
| static void in2000_setup(char *, int *) in2000__INIT; |
| static int in2000_biosparam(struct scsi_device *, struct block_device *, |
| sector_t, int *); |
| static int in2000_bus_reset(Scsi_Cmnd *); |
| |
| |
| #define IN2000_CAN_Q 16 |
| #define IN2000_SG SG_ALL |
| #define IN2000_CPL 2 |
| #define IN2000_HOST_ID 7 |
| |
| #endif /* IN2000_H */ |