rt2x00: Add support for RT5390 chip
Add new RT5390 chip support
Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 591ac32..6f4a243 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -51,6 +51,7 @@
* RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
* RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
* RF3853 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
+ * RF5390 2.4G 1T1R
*/
#define RF2820 0x0001
#define RF2850 0x0002
@@ -65,6 +66,7 @@
#define RF3320 0x000b
#define RF3322 0x000c
#define RF3853 0x000d
+#define RF5390 0x5390
/*
* Chipset revisions.
@@ -77,6 +79,7 @@
#define REV_RT3071E 0x0211
#define REV_RT3090E 0x0211
#define REV_RT3390E 0x0211
+#define REV_RT5390F 0x0502
/*
* Signal information.
@@ -121,6 +124,13 @@
#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
/*
+ * AUX_CTRL: Aux/PCI-E related configuration
+ */
+#define AUX_CTRL 0x10c
+#define AUX_CTRL_WAKE_PCIE_EN FIELD32(0x00000002)
+#define AUX_CTRL_FORCE_PCIE_CLK FIELD32(0x00000400)
+
+/*
* OPT_14: Unknown register used by rt3xxx devices.
*/
#define OPT_14_CSR 0x0114
@@ -454,7 +464,7 @@
*/
#define RF_CSR_CFG 0x0500
#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
-#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
+#define RF_CSR_CFG_REGNUM FIELD32(0x00003f00)
#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
@@ -1736,6 +1746,13 @@
*/
#define BBP4_TX_BF FIELD8(0x01)
#define BBP4_BANDWIDTH FIELD8(0x18)
+#define BBP4_MAC_IF_CTRL FIELD8(0x40)
+
+/*
+ * BBP 109
+ */
+#define BBP109_TX0_POWER FIELD8(0x0f)
+#define BBP109_TX1_POWER FIELD8(0xf0)
/*
* BBP 138: Unknown
@@ -1746,6 +1763,11 @@
#define BBP138_TX_DAC2 FIELD8(0x40)
/*
+ * BBP 152: Rx Ant
+ */
+#define BBP152_RX_DEFAULT_ANT FIELD8(0x80)
+
+/*
* RFCSR registers
* The wordsize of the RFCSR is 8 bits.
*/
@@ -1754,12 +1776,18 @@
* RFCSR 1:
*/
#define RFCSR1_RF_BLOCK_EN FIELD8(0x01)
+#define RFCSR1_PLL_PD FIELD8(0x02)
#define RFCSR1_RX0_PD FIELD8(0x04)
#define RFCSR1_TX0_PD FIELD8(0x08)
#define RFCSR1_RX1_PD FIELD8(0x10)
#define RFCSR1_TX1_PD FIELD8(0x20)
/*
+ * RFCSR 2:
+ */
+#define RFCSR2_RESCAL_EN FIELD8(0x80)
+
+/*
* RFCSR 6:
*/
#define RFCSR6_R1 FIELD8(0x03)
@@ -1771,6 +1799,11 @@
#define RFCSR7_RF_TUNING FIELD8(0x01)
/*
+ * RFCSR 11:
+ */
+#define RFCSR11_R FIELD8(0x03)
+
+/*
* RFCSR 12:
*/
#define RFCSR12_TX_POWER FIELD8(0x1f)
@@ -1791,6 +1824,7 @@
#define RFCSR17_TXMIXER_GAIN FIELD8(0x07)
#define RFCSR17_TX_LO1_EN FIELD8(0x08)
#define RFCSR17_R FIELD8(0x20)
+#define RFCSR17_CODE FIELD8(0x7f)
/*
* RFCSR 20:
@@ -1823,6 +1857,9 @@
/*
* RFCSR 30:
*/
+#define RFCSR30_TX_H20M FIELD8(0x02)
+#define RFCSR30_RX_H20M FIELD8(0x04)
+#define RFCSR30_RX_VCM FIELD8(0x18)
#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
/*
@@ -1832,6 +1869,21 @@
#define RFCSR31_RX_H20M FIELD8(0x20)
/*
+ * RFCSR 38:
+ */
+#define RFCSR38_RX_LO1_EN FIELD8(0x20)
+
+/*
+ * RFCSR 39:
+ */
+#define RFCSR39_RX_LO2_EN FIELD8(0x80)
+
+/*
+ * RFCSR 49:
+ */
+#define RFCSR49_TX FIELD8(0x3f)
+
+/*
* RF registers
*/
@@ -1864,6 +1916,11 @@
*/
/*
+ * Chip ID
+ */
+#define EEPROM_CHIP_ID 0x0000
+
+/*
* EEPROM Version
*/
#define EEPROM_VERSION 0x0001