arch/x86/Kconfig.debug - kernel/msm-4.9 - Gitiles

 menu "Kernel hacking"

 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y

 source "lib/Kconfig.debug"

 config STRICT_DEVMEM
 	bool "Filter access to /dev/mem"
 	---help---
 	  If this option is disabled, you allow userspace (root) access to all
 	  of memory, including kernel and userspace memory. Accidental
 	  access to this is obviously disastrous, but specific access can
 	  be used by people debugging the kernel. Note that with PAT support
 	  enabled, even in this case there are restrictions on /dev/mem
 	  use due to the cache aliasing requirements.

 	  If this option is switched on, the /dev/mem file only allows
 	  userspace access to PCI space and the BIOS code and data regions.
 	  This is sufficient for dosemu and X and all common users of
 	  /dev/mem.

 	  If in doubt, say Y.

 config X86_VERBOSE_BOOTUP
 	bool "Enable verbose x86 bootup info messages"
 	default y
 	---help---
 	  Enables the informational output from the decompression stage
 	  (e.g. bzImage) of the boot. If you disable this you will still
 	  see errors. Disable this if you want silent bootup.

 config EARLY_PRINTK
 	bool "Early printk" if EXPERT
 	default y
 	---help---
 	  Write kernel log output directly into the VGA buffer or to a serial
 	  port.

 	  This is useful for kernel debugging when your machine crashes very
 	  early before the console code is initialized. For normal operation
 	  it is not recommended because it looks ugly and doesn't cooperate
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash.

 config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
 	depends on EARLY_PRINTK && PCI
 	---help---
 	  Write kernel log output directly into the EHCI debug port.

 	  This is useful for kernel debugging when your machine crashes very
 	  early before the console code is initialized. For normal operation
 	  it is not recommended because it looks ugly and doesn't cooperate
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash. You need usb debug device.

 config EARLY_PRINTK_EFI
 	bool "Early printk via the EFI framebuffer"
 	depends on EFI && EARLY_PRINTK
 	select FONT_SUPPORT
 	---help---
 	  Write kernel log output directly into the EFI framebuffer.

 	  This is useful for kernel debugging when your machine crashes very
 	  early before the console code is initialized.

 config X86_PTDUMP_CORE
 	def_bool n

 config X86_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	select DEBUG_FS
 	select X86_PTDUMP_CORE
 	---help---
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
 	  It is probably not a good idea to enable this feature in a production
 	  kernel.
 	  If in doubt, say "N"

 config EFI_PGT_DUMP
 	bool "Dump the EFI pagetable"
 	depends on EFI
 	select X86_PTDUMP_CORE
 	---help---
 	  Enable this if you want to dump the EFI page table before
 	  enabling virtual mode. This can be used to debug miscellaneous
 	  issues with the mapping of the EFI runtime regions into that
 	  table.

 config DEBUG_RODATA
 	bool "Write protect kernel read-only data structures"
 	default y
 	depends on DEBUG_KERNEL
 	---help---
 	  Mark the kernel read-only data as write-protected in the pagetables,
 	  in order to catch accidental (and incorrect) writes to such const
 	  data. This is recommended so that we can catch kernel bugs sooner.
 	  If in doubt, say "Y".

 config DEBUG_RODATA_TEST
 	bool "Testcase for the DEBUG_RODATA feature"
 	depends on DEBUG_RODATA
 	default y
 	---help---
 	  This option enables a testcase for the DEBUG_RODATA
 	  feature as well as for the change_page_attr() infrastructure.
 	  If in doubt, say "N"

 config DEBUG_WX
 	bool "Warn on W+X mappings at boot"
 	depends on DEBUG_RODATA
 	select X86_PTDUMP_CORE
 	---help---
 	  Generate a warning if any W+X mappings are found at boot.

 	  This is useful for discovering cases where the kernel is leaving
 	  W+X mappings after applying NX, as such mappings are a security risk.

 	  Look for a message in dmesg output like this:

 	    x86/mm: Checked W+X mappings: passed, no W+X pages found.

 	  or like this, if the check failed:

 	    x86/mm: Checked W+X mappings: FAILED, <N> W+X pages found.

 	  Note that even if the check fails, your kernel is possibly
 	  still fine, as W+X mappings are not a security hole in
 	  themselves, what they do is that they make the exploitation
 	  of other unfixed kernel bugs easier.

 	  There is no runtime or memory usage effect of this option
 	  once the kernel has booted up - it's a one time check.

 	  If in doubt, say "Y".

 config DEBUG_SET_MODULE_RONX
 	bool "Set loadable kernel module data as NX and text as RO"
 	depends on MODULES
 	---help---
 	  This option helps catch unintended modifications to loadable
 	  kernel module's text and read-only data. It also prevents execution
 	  of module data. Such protection may interfere with run-time code
 	  patching and dynamic kernel tracing - and they might also protect
 	  against certain classes of kernel exploits.
 	  If in doubt, say "N".

 config DEBUG_NX_TEST
 	tristate "Testcase for the NX non-executable stack feature"
 	depends on DEBUG_KERNEL && m
 	---help---
 	  This option enables a testcase for the CPU NX capability
 	  and the software setup of this feature.
 	  If in doubt, say "N"

 config DOUBLEFAULT
 	default y
 	bool "Enable doublefault exception handler" if EXPERT
 	---help---
 	  This option allows trapping of rare doublefault exceptions that
 	  would otherwise cause a system to silently reboot. Disabling this
 	  option saves about 4k and might cause you much additional grey
 	  hair.

 config DEBUG_TLBFLUSH
 	bool "Set upper limit of TLB entries to flush one-by-one"
 	depends on DEBUG_KERNEL
 	---help---

 	X86-only for now.

 	This option allows the user to tune the amount of TLB entries the
 	kernel flushes one-by-one instead of doing a full TLB flush. In
 	certain situations, the former is cheaper. This is controlled by the
 	tlb_flushall_shift knob under /sys/kernel/debug/x86. If you set it
 	to -1, the code flushes the whole TLB unconditionally. Otherwise,
 	for positive values of it, the kernel will use single TLB entry
 	invalidating instructions according to the following formula:

 	flush_entries <= active_tlb_entries / 2^tlb_flushall_shift

 	If in doubt, say "N".

 config IOMMU_DEBUG
 	bool "Enable IOMMU debugging"
 	depends on GART_IOMMU && DEBUG_KERNEL
 	depends on X86_64
 	---help---
 	  Force the IOMMU to on even when you have less than 4GB of
 	  memory and add debugging code. On overflow always panic. And
 	  allow to enable IOMMU leak tracing. Can be disabled at boot
 	  time with iommu=noforce. This will also enable scatter gather
 	  list merging.  Currently not recommended for production
 	  code. When you use it make sure you have a big enough
 	  IOMMU/AGP aperture.  Most of the options enabled by this can
 	  be set more finegrained using the iommu= command line
 	  options. See Documentation/x86/x86_64/boot-options.txt for more
 	  details.

 config IOMMU_STRESS
 	bool "Enable IOMMU stress-test mode"
 	---help---
 	  This option disables various optimizations in IOMMU related
 	  code to do real stress testing of the IOMMU code. This option
 	  will cause a performance drop and should only be enabled for
 	  testing.

 config IOMMU_LEAK
 	bool "IOMMU leak tracing"
 	depends on IOMMU_DEBUG && DMA_API_DEBUG
 	---help---
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.

 config HAVE_MMIOTRACE_SUPPORT
 	def_bool y

 config X86_DECODER_SELFTEST
 	bool "x86 instruction decoder selftest"
 	depends on DEBUG_KERNEL && KPROBES
 	depends on !COMPILE_TEST
 	---help---
 	 Perform x86 instruction decoder selftests at build time.
 	 This option is useful for checking the sanity of x86 instruction
 	 decoder code.
 	 If unsure, say "N".

 #
 # IO delay types:
 #

 config IO_DELAY_TYPE_0X80
 	int
 	default "0"

 config IO_DELAY_TYPE_0XED
 	int
 	default "1"

 config IO_DELAY_TYPE_UDELAY
 	int
 	default "2"

 config IO_DELAY_TYPE_NONE
 	int
 	default "3"

 choice
 	prompt "IO delay type"
 	default IO_DELAY_0X80

 config IO_DELAY_0X80
 	bool "port 0x80 based port-IO delay [recommended]"
 	---help---
 	  This is the traditional Linux IO delay used for in/out_p.
 	  It is the most tested hence safest selection here.

 config IO_DELAY_0XED
 	bool "port 0xed based port-IO delay"
 	---help---
 	  Use port 0xed as the IO delay. This frees up port 0x80 which is
 	  often used as a hardware-debug port.

 config IO_DELAY_UDELAY
 	bool "udelay based port-IO delay"
 	---help---
 	  Use udelay(2) as the IO delay method. This provides the delay
 	  while not having any side-effect on the IO port space.

 config IO_DELAY_NONE
 	bool "no port-IO delay"
 	---help---
 	  No port-IO delay. Will break on old boxes that require port-IO
 	  delay for certain operations. Should work on most new machines.

 endchoice

 if IO_DELAY_0X80
 config DEFAULT_IO_DELAY_TYPE
 	int
 	default IO_DELAY_TYPE_0X80
 endif

 if IO_DELAY_0XED
 config DEFAULT_IO_DELAY_TYPE
 	int
 	default IO_DELAY_TYPE_0XED
 endif

 if IO_DELAY_UDELAY
 config DEFAULT_IO_DELAY_TYPE
 	int
 	default IO_DELAY_TYPE_UDELAY
 endif

 if IO_DELAY_NONE
 config DEFAULT_IO_DELAY_TYPE
 	int
 	default IO_DELAY_TYPE_NONE
 endif

 config DEBUG_BOOT_PARAMS
 	bool "Debug boot parameters"
 	depends on DEBUG_KERNEL
 	depends on DEBUG_FS
 	---help---
 	  This option will cause struct boot_params to be exported via debugfs.

 config CPA_DEBUG
 	bool "CPA self-test code"
 	depends on DEBUG_KERNEL
 	---help---
 	  Do change_page_attr() self-tests every 30 seconds.

 config OPTIMIZE_INLINING
 	bool "Allow gcc to uninline functions marked 'inline'"
 	---help---
 	  This option determines if the kernel forces gcc to inline the functions
 	  developers have marked 'inline'. Doing so takes away freedom from gcc to
 	  do what it thinks is best, which is desirable for the gcc 3.x series of
 	  compilers. The gcc 4.x series have a rewritten inlining algorithm and
 	  enabling this option will generate a smaller kernel there. Hopefully
 	  this algorithm is so good that allowing gcc 4.x and above to make the
 	  decision will become the default in the future. Until then this option
 	  is there to test gcc for this.

 	  If unsure, say N.

 config DEBUG_ENTRY
 	bool "Debug low-level entry code"
 	depends on DEBUG_KERNEL
 	---help---
 	  This option enables sanity checks in x86's low-level entry code.
 	  Some of these sanity checks may slow down kernel entries and
 	  exits or otherwise impact performance.

 	  This is currently used to help test NMI code.

 	  If unsure, say N.

 config DEBUG_NMI_SELFTEST
 	bool "NMI Selftest"
 	depends on DEBUG_KERNEL && X86_LOCAL_APIC
 	---help---
 	  Enabling this option turns on a quick NMI selftest to verify
 	  that the NMI behaves correctly.

 	  This might help diagnose strange hangs that rely on NMI to
 	  function properly.

 	  If unsure, say N.

 config DEBUG_IMR_SELFTEST
 	bool "Isolated Memory Region self test"
 	default n
 	depends on INTEL_IMR
 	---help---
 	  This option enables automated sanity testing of the IMR code.
 	  Some simple tests are run to verify IMR bounds checking, alignment
 	  and overlapping. This option is really only useful if you are
 	  debugging an IMR memory map or are modifying the IMR code and want to
 	  test your changes.

 	  If unsure say N here.

 config X86_DEBUG_STATIC_CPU_HAS
 	bool "Debug alternatives"
 	depends on DEBUG_KERNEL
 	---help---
 	  This option causes additional code to be generated which
 	  fails if static_cpu_has() is used before alternatives have
 	  run.

 	  If unsure, say N.

 config X86_DEBUG_FPU
 	bool "Debug the x86 FPU code"
 	depends on DEBUG_KERNEL
 	default y
 	---help---
 	  If this option is enabled then there will be extra sanity
 	  checks and (boot time) debug printouts added to the kernel.
 	  This debugging adds some small amount of runtime overhead
 	  to the kernel.

 	  If unsure, say N.

 config PUNIT_ATOM_DEBUG
 	tristate "ATOM Punit debug driver"
 	select DEBUG_FS
 	select IOSF_MBI
 	---help---
 	  This is a debug driver, which gets the power states
 	  of all Punit North Complex devices. The power states of
 	  each device is exposed as part of the debugfs interface.
 	  The current power state can be read from
 	  /sys/kernel/debug/punit_atom/dev_power_state

 endmenu
	menu "Kernel hacking"

	config TRACE_IRQFLAGS_SUPPORT
	def_bool y

	source "lib/Kconfig.debug"

	config STRICT_DEVMEM
	bool "Filter access to /dev/mem"
	---help---
	If this option is disabled, you allow userspace (root) access to all
	of memory, including kernel and userspace memory. Accidental
	access to this is obviously disastrous, but specific access can
	be used by people debugging the kernel. Note that with PAT support
	enabled, even in this case there are restrictions on /dev/mem
	use due to the cache aliasing requirements.

	If this option is switched on, the /dev/mem file only allows
	userspace access to PCI space and the BIOS code and data regions.
	This is sufficient for dosemu and X and all common users of
	/dev/mem.

	If in doubt, say Y.

	config X86_VERBOSE_BOOTUP
	bool "Enable verbose x86 bootup info messages"
	default y
	---help---
	Enables the informational output from the decompression stage
	(e.g. bzImage) of the boot. If you disable this you will still
	see errors. Disable this if you want silent bootup.

	config EARLY_PRINTK
	bool "Early printk" if EXPERT
	default y
	---help---
	Write kernel log output directly into the VGA buffer or to a serial
	port.

	This is useful for kernel debugging when your machine crashes very
	early before the console code is initialized. For normal operation
	it is not recommended because it looks ugly and doesn't cooperate
	with klogd/syslogd or the X server. You should normally N here,
	unless you want to debug such a crash.

	config EARLY_PRINTK_DBGP
	bool "Early printk via EHCI debug port"
	depends on EARLY_PRINTK && PCI
	---help---
	Write kernel log output directly into the EHCI debug port.

	This is useful for kernel debugging when your machine crashes very
	early before the console code is initialized. For normal operation
	it is not recommended because it looks ugly and doesn't cooperate
	with klogd/syslogd or the X server. You should normally N here,
	unless you want to debug such a crash. You need usb debug device.

	config EARLY_PRINTK_EFI
	bool "Early printk via the EFI framebuffer"
	depends on EFI && EARLY_PRINTK
	select FONT_SUPPORT
	---help---
	Write kernel log output directly into the EFI framebuffer.

	This is useful for kernel debugging when your machine crashes very
	early before the console code is initialized.

	config X86_PTDUMP_CORE
	def_bool n

	config X86_PTDUMP
	bool "Export kernel pagetable layout to userspace via debugfs"
	depends on DEBUG_KERNEL
	select DEBUG_FS
	select X86_PTDUMP_CORE
	---help---
	Say Y here if you want to show the kernel pagetable layout in a
	debugfs file. This information is only useful for kernel developers
	who are working in architecture specific areas of the kernel.
	It is probably not a good idea to enable this feature in a production
	kernel.
	If in doubt, say "N"

	config EFI_PGT_DUMP
	bool "Dump the EFI pagetable"
	depends on EFI
	select X86_PTDUMP_CORE
	---help---
	Enable this if you want to dump the EFI page table before
	enabling virtual mode. This can be used to debug miscellaneous
	issues with the mapping of the EFI runtime regions into that
	table.

	config DEBUG_RODATA
	bool "Write protect kernel read-only data structures"
	default y
	depends on DEBUG_KERNEL
	---help---
	Mark the kernel read-only data as write-protected in the pagetables,
	in order to catch accidental (and incorrect) writes to such const
	data. This is recommended so that we can catch kernel bugs sooner.
	If in doubt, say "Y".

	config DEBUG_RODATA_TEST
	bool "Testcase for the DEBUG_RODATA feature"
	depends on DEBUG_RODATA
	default y
	---help---
	This option enables a testcase for the DEBUG_RODATA
	feature as well as for the change_page_attr() infrastructure.
	If in doubt, say "N"

	config DEBUG_WX
	bool "Warn on W+X mappings at boot"
	depends on DEBUG_RODATA
	select X86_PTDUMP_CORE
	---help---
	Generate a warning if any W+X mappings are found at boot.

	This is useful for discovering cases where the kernel is leaving
	W+X mappings after applying NX, as such mappings are a security risk.

	Look for a message in dmesg output like this:

	x86/mm: Checked W+X mappings: passed, no W+X pages found.

	or like this, if the check failed:

	x86/mm: Checked W+X mappings: FAILED, <N> W+X pages found.

	Note that even if the check fails, your kernel is possibly
	still fine, as W+X mappings are not a security hole in
	themselves, what they do is that they make the exploitation
	of other unfixed kernel bugs easier.

	There is no runtime or memory usage effect of this option
	once the kernel has booted up - it's a one time check.

	If in doubt, say "Y".

	config DEBUG_SET_MODULE_RONX
	bool "Set loadable kernel module data as NX and text as RO"
	depends on MODULES
	---help---
	This option helps catch unintended modifications to loadable
	kernel module's text and read-only data. It also prevents execution
	of module data. Such protection may interfere with run-time code
	patching and dynamic kernel tracing - and they might also protect
	against certain classes of kernel exploits.
	If in doubt, say "N".

	config DEBUG_NX_TEST
	tristate "Testcase for the NX non-executable stack feature"
	depends on DEBUG_KERNEL && m
	---help---
	This option enables a testcase for the CPU NX capability
	and the software setup of this feature.
	If in doubt, say "N"

	config DOUBLEFAULT
	default y
	bool "Enable doublefault exception handler" if EXPERT
	---help---
	This option allows trapping of rare doublefault exceptions that
	would otherwise cause a system to silently reboot. Disabling this
	option saves about 4k and might cause you much additional grey
	hair.

	config DEBUG_TLBFLUSH
	bool "Set upper limit of TLB entries to flush one-by-one"
	depends on DEBUG_KERNEL
	---help---

	X86-only for now.

	This option allows the user to tune the amount of TLB entries the
	kernel flushes one-by-one instead of doing a full TLB flush. In
	certain situations, the former is cheaper. This is controlled by the
	tlb_flushall_shift knob under /sys/kernel/debug/x86. If you set it
	to -1, the code flushes the whole TLB unconditionally. Otherwise,
	for positive values of it, the kernel will use single TLB entry
	invalidating instructions according to the following formula:

	flush_entries <= active_tlb_entries / 2^tlb_flushall_shift

	If in doubt, say "N".

	config IOMMU_DEBUG
	bool "Enable IOMMU debugging"
	depends on GART_IOMMU && DEBUG_KERNEL
	depends on X86_64
	---help---
	Force the IOMMU to on even when you have less than 4GB of
	memory and add debugging code. On overflow always panic. And
	allow to enable IOMMU leak tracing. Can be disabled at boot
	time with iommu=noforce. This will also enable scatter gather
	list merging. Currently not recommended for production
	code. When you use it make sure you have a big enough
	IOMMU/AGP aperture. Most of the options enabled by this can
	be set more finegrained using the iommu= command line
	options. See Documentation/x86/x86_64/boot-options.txt for more
	details.

	config IOMMU_STRESS
	bool "Enable IOMMU stress-test mode"
	---help---
	This option disables various optimizations in IOMMU related
	code to do real stress testing of the IOMMU code. This option
	will cause a performance drop and should only be enabled for
	testing.

	config IOMMU_LEAK
	bool "IOMMU leak tracing"
	depends on IOMMU_DEBUG && DMA_API_DEBUG
	---help---
	Add a simple leak tracer to the IOMMU code. This is useful when you
	are debugging a buggy device driver that leaks IOMMU mappings.

	config HAVE_MMIOTRACE_SUPPORT
	def_bool y

	config X86_DECODER_SELFTEST
	bool "x86 instruction decoder selftest"
	depends on DEBUG_KERNEL && KPROBES
	depends on !COMPILE_TEST
	---help---
	Perform x86 instruction decoder selftests at build time.
	This option is useful for checking the sanity of x86 instruction
	decoder code.
	If unsure, say "N".

	#
	# IO delay types:
	#

	config IO_DELAY_TYPE_0X80
	int
	default "0"

	config IO_DELAY_TYPE_0XED
	int
	default "1"

	config IO_DELAY_TYPE_UDELAY
	int
	default "2"

	config IO_DELAY_TYPE_NONE
	int
	default "3"

	choice
	prompt "IO delay type"
	default IO_DELAY_0X80

	config IO_DELAY_0X80
	bool "port 0x80 based port-IO delay [recommended]"
	---help---
	This is the traditional Linux IO delay used for in/out_p.
	It is the most tested hence safest selection here.

	config IO_DELAY_0XED
	bool "port 0xed based port-IO delay"
	---help---
	Use port 0xed as the IO delay. This frees up port 0x80 which is
	often used as a hardware-debug port.

	config IO_DELAY_UDELAY
	bool "udelay based port-IO delay"
	---help---
	Use udelay(2) as the IO delay method. This provides the delay
	while not having any side-effect on the IO port space.

	config IO_DELAY_NONE
	bool "no port-IO delay"
	---help---
	No port-IO delay. Will break on old boxes that require port-IO
	delay for certain operations. Should work on most new machines.

	endchoice

	if IO_DELAY_0X80
	config DEFAULT_IO_DELAY_TYPE
	int
	default IO_DELAY_TYPE_0X80
	endif

	if IO_DELAY_0XED
	config DEFAULT_IO_DELAY_TYPE
	int
	default IO_DELAY_TYPE_0XED
	endif

	if IO_DELAY_UDELAY
	config DEFAULT_IO_DELAY_TYPE
	int
	default IO_DELAY_TYPE_UDELAY
	endif

	if IO_DELAY_NONE
	config DEFAULT_IO_DELAY_TYPE
	int
	default IO_DELAY_TYPE_NONE
	endif

	config DEBUG_BOOT_PARAMS
	bool "Debug boot parameters"
	depends on DEBUG_KERNEL
	depends on DEBUG_FS
	---help---
	This option will cause struct boot_params to be exported via debugfs.

	config CPA_DEBUG
	bool "CPA self-test code"
	depends on DEBUG_KERNEL
	---help---
	Do change_page_attr() self-tests every 30 seconds.

	config OPTIMIZE_INLINING
	bool "Allow gcc to uninline functions marked 'inline'"
	---help---
	This option determines if the kernel forces gcc to inline the functions
	developers have marked 'inline'. Doing so takes away freedom from gcc to
	do what it thinks is best, which is desirable for the gcc 3.x series of
	compilers. The gcc 4.x series have a rewritten inlining algorithm and
	enabling this option will generate a smaller kernel there. Hopefully
	this algorithm is so good that allowing gcc 4.x and above to make the
	decision will become the default in the future. Until then this option
	is there to test gcc for this.

	If unsure, say N.

	config DEBUG_ENTRY
	bool "Debug low-level entry code"
	depends on DEBUG_KERNEL
	---help---
	This option enables sanity checks in x86's low-level entry code.
	Some of these sanity checks may slow down kernel entries and
	exits or otherwise impact performance.

	This is currently used to help test NMI code.

	If unsure, say N.

	config DEBUG_NMI_SELFTEST
	bool "NMI Selftest"
	depends on DEBUG_KERNEL && X86_LOCAL_APIC
	---help---
	Enabling this option turns on a quick NMI selftest to verify
	that the NMI behaves correctly.

	This might help diagnose strange hangs that rely on NMI to
	function properly.

	If unsure, say N.

	config DEBUG_IMR_SELFTEST
	bool "Isolated Memory Region self test"
	default n
	depends on INTEL_IMR
	---help---
	This option enables automated sanity testing of the IMR code.
	Some simple tests are run to verify IMR bounds checking, alignment
	and overlapping. This option is really only useful if you are
	debugging an IMR memory map or are modifying the IMR code and want to
	test your changes.

	If unsure say N here.

	config X86_DEBUG_STATIC_CPU_HAS
	bool "Debug alternatives"
	depends on DEBUG_KERNEL
	---help---
	This option causes additional code to be generated which
	fails if static_cpu_has() is used before alternatives have
	run.

	If unsure, say N.

	config X86_DEBUG_FPU
	bool "Debug the x86 FPU code"
	depends on DEBUG_KERNEL
	default y
	---help---
	If this option is enabled then there will be extra sanity
	checks and (boot time) debug printouts added to the kernel.
	This debugging adds some small amount of runtime overhead
	to the kernel.

	If unsure, say N.

	config PUNIT_ATOM_DEBUG
	tristate "ATOM Punit debug driver"
	select DEBUG_FS
	select IOSF_MBI
	---help---
	This is a debug driver, which gets the power states
	of all Punit North Complex devices. The power states of
	each device is exposed as part of the debugfs interface.
	The current power state can be read from
	/sys/kernel/debug/punit_atom/dev_power_state

	endmenu