| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| *****************************************************************************/ |
| |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| |
| #include <net/mac80211.h> |
| |
| #include "iwl-commands.h" |
| #include "iwl-dev.h" |
| #include "iwl-core.h" |
| #include "iwl-debug.h" |
| #include "iwl-eeprom.h" |
| #include "iwl-io.h" |
| |
| /************************** EEPROM BANDS **************************** |
| * |
| * The iwlegacy_eeprom_band definitions below provide the mapping from the |
| * EEPROM contents to the specific channel number supported for each |
| * band. |
| * |
| * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3 |
| * definition below maps to physical channel 42 in the 5.2GHz spectrum. |
| * The specific geography and calibration information for that channel |
| * is contained in the eeprom map itself. |
| * |
| * During init, we copy the eeprom information and channel map |
| * information into priv->channel_info_24/52 and priv->channel_map_24/52 |
| * |
| * channel_map_24/52 provides the index in the channel_info array for a |
| * given channel. We have to have two separate maps as there is channel |
| * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and |
| * band_2 |
| * |
| * A value of 0xff stored in the channel_map indicates that the channel |
| * is not supported by the hardware at all. |
| * |
| * A value of 0xfe in the channel_map indicates that the channel is not |
| * valid for Tx with the current hardware. This means that |
| * while the system can tune and receive on a given channel, it may not |
| * be able to associate or transmit any frames on that |
| * channel. There is no corresponding channel information for that |
| * entry. |
| * |
| *********************************************************************/ |
| |
| /* 2.4 GHz */ |
| const u8 iwlegacy_eeprom_band_1[14] = { |
| 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 |
| }; |
| |
| /* 5.2 GHz bands */ |
| static const u8 iwlegacy_eeprom_band_2[] = { /* 4915-5080MHz */ |
| 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 |
| }; |
| |
| static const u8 iwlegacy_eeprom_band_3[] = { /* 5170-5320MHz */ |
| 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 |
| }; |
| |
| static const u8 iwlegacy_eeprom_band_4[] = { /* 5500-5700MHz */ |
| 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 |
| }; |
| |
| static const u8 iwlegacy_eeprom_band_5[] = { /* 5725-5825MHz */ |
| 145, 149, 153, 157, 161, 165 |
| }; |
| |
| static const u8 iwlegacy_eeprom_band_6[] = { /* 2.4 ht40 channel */ |
| 1, 2, 3, 4, 5, 6, 7 |
| }; |
| |
| static const u8 iwlegacy_eeprom_band_7[] = { /* 5.2 ht40 channel */ |
| 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157 |
| }; |
| |
| /****************************************************************************** |
| * |
| * EEPROM related functions |
| * |
| ******************************************************************************/ |
| |
| static int iwl_legacy_eeprom_verify_signature(struct iwl_priv *priv) |
| { |
| u32 gp = iwl_read32(priv, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK; |
| int ret = 0; |
| |
| IWL_DEBUG_EEPROM(priv, "EEPROM signature=0x%08x\n", gp); |
| switch (gp) { |
| case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K: |
| case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K: |
| break; |
| default: |
| IWL_ERR(priv, "bad EEPROM signature," |
| "EEPROM_GP=0x%08x\n", gp); |
| ret = -ENOENT; |
| break; |
| } |
| return ret; |
| } |
| |
| const u8 |
| *iwl_legacy_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) |
| { |
| BUG_ON(offset >= priv->cfg->base_params->eeprom_size); |
| return &priv->eeprom[offset]; |
| } |
| EXPORT_SYMBOL(iwl_legacy_eeprom_query_addr); |
| |
| u16 iwl_legacy_eeprom_query16(const struct iwl_priv *priv, size_t offset) |
| { |
| if (!priv->eeprom) |
| return 0; |
| return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8); |
| } |
| EXPORT_SYMBOL(iwl_legacy_eeprom_query16); |
| |
| /** |
| * iwl_legacy_eeprom_init - read EEPROM contents |
| * |
| * Load the EEPROM contents from adapter into priv->eeprom |
| * |
| * NOTE: This routine uses the non-debug IO access functions. |
| */ |
| int iwl_legacy_eeprom_init(struct iwl_priv *priv) |
| { |
| __le16 *e; |
| u32 gp = iwl_read32(priv, CSR_EEPROM_GP); |
| int sz; |
| int ret; |
| u16 addr; |
| |
| /* allocate eeprom */ |
| sz = priv->cfg->base_params->eeprom_size; |
| IWL_DEBUG_EEPROM(priv, "NVM size = %d\n", sz); |
| priv->eeprom = kzalloc(sz, GFP_KERNEL); |
| if (!priv->eeprom) { |
| ret = -ENOMEM; |
| goto alloc_err; |
| } |
| e = (__le16 *)priv->eeprom; |
| |
| priv->cfg->ops->lib->apm_ops.init(priv); |
| |
| ret = iwl_legacy_eeprom_verify_signature(priv); |
| if (ret < 0) { |
| IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp); |
| ret = -ENOENT; |
| goto err; |
| } |
| |
| /* Make sure driver (instead of uCode) is allowed to read EEPROM */ |
| ret = priv->cfg->ops->lib->eeprom_ops.acquire_semaphore(priv); |
| if (ret < 0) { |
| IWL_ERR(priv, "Failed to acquire EEPROM semaphore.\n"); |
| ret = -ENOENT; |
| goto err; |
| } |
| |
| /* eeprom is an array of 16bit values */ |
| for (addr = 0; addr < sz; addr += sizeof(u16)) { |
| u32 r; |
| |
| _iwl_legacy_write32(priv, CSR_EEPROM_REG, |
| CSR_EEPROM_REG_MSK_ADDR & (addr << 1)); |
| |
| ret = iwl_poll_bit(priv, CSR_EEPROM_REG, |
| CSR_EEPROM_REG_READ_VALID_MSK, |
| CSR_EEPROM_REG_READ_VALID_MSK, |
| IWL_EEPROM_ACCESS_TIMEOUT); |
| if (ret < 0) { |
| IWL_ERR(priv, "Time out reading EEPROM[%d]\n", |
| addr); |
| goto done; |
| } |
| r = _iwl_legacy_read_direct32(priv, CSR_EEPROM_REG); |
| e[addr / 2] = cpu_to_le16(r >> 16); |
| } |
| |
| IWL_DEBUG_EEPROM(priv, "NVM Type: %s, version: 0x%x\n", |
| "EEPROM", |
| iwl_legacy_eeprom_query16(priv, EEPROM_VERSION)); |
| |
| ret = 0; |
| done: |
| priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv); |
| |
| err: |
| if (ret) |
| iwl_legacy_eeprom_free(priv); |
| /* Reset chip to save power until we load uCode during "up". */ |
| iwl_legacy_apm_stop(priv); |
| alloc_err: |
| return ret; |
| } |
| EXPORT_SYMBOL(iwl_legacy_eeprom_init); |
| |
| void iwl_legacy_eeprom_free(struct iwl_priv *priv) |
| { |
| kfree(priv->eeprom); |
| priv->eeprom = NULL; |
| } |
| EXPORT_SYMBOL(iwl_legacy_eeprom_free); |
| |
| static void iwl_legacy_init_band_reference(const struct iwl_priv *priv, |
| int eep_band, int *eeprom_ch_count, |
| const struct iwl_eeprom_channel **eeprom_ch_info, |
| const u8 **eeprom_ch_index) |
| { |
| u32 offset = priv->cfg->ops->lib-> |
| eeprom_ops.regulatory_bands[eep_band - 1]; |
| switch (eep_band) { |
| case 1: /* 2.4GHz band */ |
| *eeprom_ch_count = ARRAY_SIZE(iwlegacy_eeprom_band_1); |
| *eeprom_ch_info = (struct iwl_eeprom_channel *) |
| iwl_legacy_eeprom_query_addr(priv, offset); |
| *eeprom_ch_index = iwlegacy_eeprom_band_1; |
| break; |
| case 2: /* 4.9GHz band */ |
| *eeprom_ch_count = ARRAY_SIZE(iwlegacy_eeprom_band_2); |
| *eeprom_ch_info = (struct iwl_eeprom_channel *) |
| iwl_legacy_eeprom_query_addr(priv, offset); |
| *eeprom_ch_index = iwlegacy_eeprom_band_2; |
| break; |
| case 3: /* 5.2GHz band */ |
| *eeprom_ch_count = ARRAY_SIZE(iwlegacy_eeprom_band_3); |
| *eeprom_ch_info = (struct iwl_eeprom_channel *) |
| iwl_legacy_eeprom_query_addr(priv, offset); |
| *eeprom_ch_index = iwlegacy_eeprom_band_3; |
| break; |
| case 4: /* 5.5GHz band */ |
| *eeprom_ch_count = ARRAY_SIZE(iwlegacy_eeprom_band_4); |
| *eeprom_ch_info = (struct iwl_eeprom_channel *) |
| iwl_legacy_eeprom_query_addr(priv, offset); |
| *eeprom_ch_index = iwlegacy_eeprom_band_4; |
| break; |
| case 5: /* 5.7GHz band */ |
| *eeprom_ch_count = ARRAY_SIZE(iwlegacy_eeprom_band_5); |
| *eeprom_ch_info = (struct iwl_eeprom_channel *) |
| iwl_legacy_eeprom_query_addr(priv, offset); |
| *eeprom_ch_index = iwlegacy_eeprom_band_5; |
| break; |
| case 6: /* 2.4GHz ht40 channels */ |
| *eeprom_ch_count = ARRAY_SIZE(iwlegacy_eeprom_band_6); |
| *eeprom_ch_info = (struct iwl_eeprom_channel *) |
| iwl_legacy_eeprom_query_addr(priv, offset); |
| *eeprom_ch_index = iwlegacy_eeprom_band_6; |
| break; |
| case 7: /* 5 GHz ht40 channels */ |
| *eeprom_ch_count = ARRAY_SIZE(iwlegacy_eeprom_band_7); |
| *eeprom_ch_info = (struct iwl_eeprom_channel *) |
| iwl_legacy_eeprom_query_addr(priv, offset); |
| *eeprom_ch_index = iwlegacy_eeprom_band_7; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| } |
| |
| #define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \ |
| ? # x " " : "") |
| /** |
| * iwl_legacy_mod_ht40_chan_info - Copy ht40 channel info into driver's priv. |
| * |
| * Does not set up a command, or touch hardware. |
| */ |
| static int iwl_legacy_mod_ht40_chan_info(struct iwl_priv *priv, |
| enum ieee80211_band band, u16 channel, |
| const struct iwl_eeprom_channel *eeprom_ch, |
| u8 clear_ht40_extension_channel) |
| { |
| struct iwl_channel_info *ch_info; |
| |
| ch_info = (struct iwl_channel_info *) |
| iwl_legacy_get_channel_info(priv, band, channel); |
| |
| if (!iwl_legacy_is_channel_valid(ch_info)) |
| return -1; |
| |
| IWL_DEBUG_EEPROM(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):" |
| " Ad-Hoc %ssupported\n", |
| ch_info->channel, |
| iwl_legacy_is_channel_a_band(ch_info) ? |
| "5.2" : "2.4", |
| CHECK_AND_PRINT(IBSS), |
| CHECK_AND_PRINT(ACTIVE), |
| CHECK_AND_PRINT(RADAR), |
| CHECK_AND_PRINT(WIDE), |
| CHECK_AND_PRINT(DFS), |
| eeprom_ch->flags, |
| eeprom_ch->max_power_avg, |
| ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) |
| && !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? |
| "" : "not "); |
| |
| ch_info->ht40_eeprom = *eeprom_ch; |
| ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg; |
| ch_info->ht40_flags = eeprom_ch->flags; |
| if (eeprom_ch->flags & EEPROM_CHANNEL_VALID) |
| ch_info->ht40_extension_channel &= |
| ~clear_ht40_extension_channel; |
| |
| return 0; |
| } |
| |
| #define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \ |
| ? # x " " : "") |
| |
| /** |
| * iwl_legacy_init_channel_map - Set up driver's info for all possible channels |
| */ |
| int iwl_legacy_init_channel_map(struct iwl_priv *priv) |
| { |
| int eeprom_ch_count = 0; |
| const u8 *eeprom_ch_index = NULL; |
| const struct iwl_eeprom_channel *eeprom_ch_info = NULL; |
| int band, ch; |
| struct iwl_channel_info *ch_info; |
| |
| if (priv->channel_count) { |
| IWL_DEBUG_EEPROM(priv, "Channel map already initialized.\n"); |
| return 0; |
| } |
| |
| IWL_DEBUG_EEPROM(priv, "Initializing regulatory info from EEPROM\n"); |
| |
| priv->channel_count = |
| ARRAY_SIZE(iwlegacy_eeprom_band_1) + |
| ARRAY_SIZE(iwlegacy_eeprom_band_2) + |
| ARRAY_SIZE(iwlegacy_eeprom_band_3) + |
| ARRAY_SIZE(iwlegacy_eeprom_band_4) + |
| ARRAY_SIZE(iwlegacy_eeprom_band_5); |
| |
| IWL_DEBUG_EEPROM(priv, "Parsing data for %d channels.\n", |
| priv->channel_count); |
| |
| priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) * |
| priv->channel_count, GFP_KERNEL); |
| if (!priv->channel_info) { |
| IWL_ERR(priv, "Could not allocate channel_info\n"); |
| priv->channel_count = 0; |
| return -ENOMEM; |
| } |
| |
| ch_info = priv->channel_info; |
| |
| /* Loop through the 5 EEPROM bands adding them in order to the |
| * channel map we maintain (that contains additional information than |
| * what just in the EEPROM) */ |
| for (band = 1; band <= 5; band++) { |
| |
| iwl_legacy_init_band_reference(priv, band, &eeprom_ch_count, |
| &eeprom_ch_info, &eeprom_ch_index); |
| |
| /* Loop through each band adding each of the channels */ |
| for (ch = 0; ch < eeprom_ch_count; ch++) { |
| ch_info->channel = eeprom_ch_index[ch]; |
| ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ : |
| IEEE80211_BAND_5GHZ; |
| |
| /* permanently store EEPROM's channel regulatory flags |
| * and max power in channel info database. */ |
| ch_info->eeprom = eeprom_ch_info[ch]; |
| |
| /* Copy the run-time flags so they are there even on |
| * invalid channels */ |
| ch_info->flags = eeprom_ch_info[ch].flags; |
| /* First write that ht40 is not enabled, and then enable |
| * one by one */ |
| ch_info->ht40_extension_channel = |
| IEEE80211_CHAN_NO_HT40; |
| |
| if (!(iwl_legacy_is_channel_valid(ch_info))) { |
| IWL_DEBUG_EEPROM(priv, |
| "Ch. %d Flags %x [%sGHz] - " |
| "No traffic\n", |
| ch_info->channel, |
| ch_info->flags, |
| iwl_legacy_is_channel_a_band(ch_info) ? |
| "5.2" : "2.4"); |
| ch_info++; |
| continue; |
| } |
| |
| /* Initialize regulatory-based run-time data */ |
| ch_info->max_power_avg = ch_info->curr_txpow = |
| eeprom_ch_info[ch].max_power_avg; |
| ch_info->scan_power = eeprom_ch_info[ch].max_power_avg; |
| ch_info->min_power = 0; |
| |
| IWL_DEBUG_EEPROM(priv, "Ch. %d [%sGHz] " |
| "%s%s%s%s%s%s(0x%02x %ddBm):" |
| " Ad-Hoc %ssupported\n", |
| ch_info->channel, |
| iwl_legacy_is_channel_a_band(ch_info) ? |
| "5.2" : "2.4", |
| CHECK_AND_PRINT_I(VALID), |
| CHECK_AND_PRINT_I(IBSS), |
| CHECK_AND_PRINT_I(ACTIVE), |
| CHECK_AND_PRINT_I(RADAR), |
| CHECK_AND_PRINT_I(WIDE), |
| CHECK_AND_PRINT_I(DFS), |
| eeprom_ch_info[ch].flags, |
| eeprom_ch_info[ch].max_power_avg, |
| ((eeprom_ch_info[ch]. |
| flags & EEPROM_CHANNEL_IBSS) |
| && !(eeprom_ch_info[ch]. |
| flags & EEPROM_CHANNEL_RADAR)) |
| ? "" : "not "); |
| |
| /* Set the tx_power_user_lmt to the highest power |
| * supported by any channel */ |
| if (eeprom_ch_info[ch].max_power_avg > |
| priv->tx_power_user_lmt) |
| priv->tx_power_user_lmt = |
| eeprom_ch_info[ch].max_power_avg; |
| |
| ch_info++; |
| } |
| } |
| |
| /* Check if we do have HT40 channels */ |
| if (priv->cfg->ops->lib->eeprom_ops.regulatory_bands[5] == |
| EEPROM_REGULATORY_BAND_NO_HT40 && |
| priv->cfg->ops->lib->eeprom_ops.regulatory_bands[6] == |
| EEPROM_REGULATORY_BAND_NO_HT40) |
| return 0; |
| |
| /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */ |
| for (band = 6; band <= 7; band++) { |
| enum ieee80211_band ieeeband; |
| |
| iwl_legacy_init_band_reference(priv, band, &eeprom_ch_count, |
| &eeprom_ch_info, &eeprom_ch_index); |
| |
| /* EEPROM band 6 is 2.4, band 7 is 5 GHz */ |
| ieeeband = |
| (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; |
| |
| /* Loop through each band adding each of the channels */ |
| for (ch = 0; ch < eeprom_ch_count; ch++) { |
| /* Set up driver's info for lower half */ |
| iwl_legacy_mod_ht40_chan_info(priv, ieeeband, |
| eeprom_ch_index[ch], |
| &eeprom_ch_info[ch], |
| IEEE80211_CHAN_NO_HT40PLUS); |
| |
| /* Set up driver's info for upper half */ |
| iwl_legacy_mod_ht40_chan_info(priv, ieeeband, |
| eeprom_ch_index[ch] + 4, |
| &eeprom_ch_info[ch], |
| IEEE80211_CHAN_NO_HT40MINUS); |
| } |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(iwl_legacy_init_channel_map); |
| |
| /* |
| * iwl_legacy_free_channel_map - undo allocations in iwl_legacy_init_channel_map |
| */ |
| void iwl_legacy_free_channel_map(struct iwl_priv *priv) |
| { |
| kfree(priv->channel_info); |
| priv->channel_count = 0; |
| } |
| EXPORT_SYMBOL(iwl_legacy_free_channel_map); |
| |
| /** |
| * iwl_legacy_get_channel_info - Find driver's private channel info |
| * |
| * Based on band and channel number. |
| */ |
| const struct |
| iwl_channel_info *iwl_legacy_get_channel_info(const struct iwl_priv *priv, |
| enum ieee80211_band band, u16 channel) |
| { |
| int i; |
| |
| switch (band) { |
| case IEEE80211_BAND_5GHZ: |
| for (i = 14; i < priv->channel_count; i++) { |
| if (priv->channel_info[i].channel == channel) |
| return &priv->channel_info[i]; |
| } |
| break; |
| case IEEE80211_BAND_2GHZ: |
| if (channel >= 1 && channel <= 14) |
| return &priv->channel_info[channel - 1]; |
| break; |
| default: |
| BUG(); |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(iwl_legacy_get_channel_info); |