UAPI: (Scripted) Disintegrate include/linux
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 9adcc29..89b4614 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -23,140 +23,8 @@
#ifndef _LINUX_IF_ARP_H
#define _LINUX_IF_ARP_H
-#include <linux/netdevice.h>
-
-/* ARP protocol HARDWARE identifiers. */
-#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */
-#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */
-#define ARPHRD_EETHER 2 /* Experimental Ethernet */
-#define ARPHRD_AX25 3 /* AX.25 Level 2 */
-#define ARPHRD_PRONET 4 /* PROnet token ring */
-#define ARPHRD_CHAOS 5 /* Chaosnet */
-#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */
-#define ARPHRD_ARCNET 7 /* ARCnet */
-#define ARPHRD_APPLETLK 8 /* APPLEtalk */
-#define ARPHRD_DLCI 15 /* Frame Relay DLCI */
-#define ARPHRD_ATM 19 /* ATM */
-#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */
-#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */
-#define ARPHRD_EUI64 27 /* EUI-64 */
-#define ARPHRD_INFINIBAND 32 /* InfiniBand */
-
-/* Dummy types for non ARP hardware */
-#define ARPHRD_SLIP 256
-#define ARPHRD_CSLIP 257
-#define ARPHRD_SLIP6 258
-#define ARPHRD_CSLIP6 259
-#define ARPHRD_RSRVD 260 /* Notional KISS type */
-#define ARPHRD_ADAPT 264
-#define ARPHRD_ROSE 270
-#define ARPHRD_X25 271 /* CCITT X.25 */
-#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */
-#define ARPHRD_CAN 280 /* Controller Area Network */
-#define ARPHRD_PPP 512
-#define ARPHRD_CISCO 513 /* Cisco HDLC */
-#define ARPHRD_HDLC ARPHRD_CISCO
-#define ARPHRD_LAPB 516 /* LAPB */
-#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */
-#define ARPHRD_RAWHDLC 518 /* Raw HDLC */
-
-#define ARPHRD_TUNNEL 768 /* IPIP tunnel */
-#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */
-#define ARPHRD_FRAD 770 /* Frame Relay Access Device */
-#define ARPHRD_SKIP 771 /* SKIP vif */
-#define ARPHRD_LOOPBACK 772 /* Loopback device */
-#define ARPHRD_LOCALTLK 773 /* Localtalk device */
-#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */
-#define ARPHRD_BIF 775 /* AP1000 BIF */
-#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */
-#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */
-#define ARPHRD_IPGRE 778 /* GRE over IP */
-#define ARPHRD_PIMREG 779 /* PIMSM register interface */
-#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */
-#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */
-#define ARPHRD_ECONET 782 /* Acorn Econet */
-#define ARPHRD_IRDA 783 /* Linux-IrDA */
-/* ARP works differently on different FC media .. so */
-#define ARPHRD_FCPP 784 /* Point to point fibrechannel */
-#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */
-#define ARPHRD_FCPL 786 /* Fibrechannel public loop */
-#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */
- /* 787->799 reserved for fibrechannel media types */
-#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */
-#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */
-#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */
-#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */
-#define ARPHRD_IEEE802154 804
-#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */
-
-#define ARPHRD_PHONET 820 /* PhoNet media type */
-#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */
-#define ARPHRD_CAIF 822 /* CAIF media type */
-#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */
-
-#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */
-#define ARPHRD_NONE 0xFFFE /* zero header length */
-
-/* ARP protocol opcodes. */
-#define ARPOP_REQUEST 1 /* ARP request */
-#define ARPOP_REPLY 2 /* ARP reply */
-#define ARPOP_RREQUEST 3 /* RARP request */
-#define ARPOP_RREPLY 4 /* RARP reply */
-#define ARPOP_InREQUEST 8 /* InARP request */
-#define ARPOP_InREPLY 9 /* InARP reply */
-#define ARPOP_NAK 10 /* (ATM)ARP NAK */
-
-
-/* ARP ioctl request. */
-struct arpreq {
- struct sockaddr arp_pa; /* protocol address */
- struct sockaddr arp_ha; /* hardware address */
- int arp_flags; /* flags */
- struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
- char arp_dev[16];
-};
-
-struct arpreq_old {
- struct sockaddr arp_pa; /* protocol address */
- struct sockaddr arp_ha; /* hardware address */
- int arp_flags; /* flags */
- struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
-};
-
-/* ARP Flag values. */
-#define ATF_COM 0x02 /* completed entry (ha valid) */
-#define ATF_PERM 0x04 /* permanent entry */
-#define ATF_PUBL 0x08 /* publish entry */
-#define ATF_USETRAILERS 0x10 /* has requested trailers */
-#define ATF_NETMASK 0x20 /* want to use a netmask (only
- for proxy entries) */
-#define ATF_DONTPUB 0x40 /* don't answer this addresses */
-
-/*
- * This structure defines an ethernet arp header.
- */
-
-struct arphdr {
- __be16 ar_hrd; /* format of hardware address */
- __be16 ar_pro; /* format of protocol address */
- unsigned char ar_hln; /* length of hardware address */
- unsigned char ar_pln; /* length of protocol address */
- __be16 ar_op; /* ARP opcode (command) */
-
-#if 0
- /*
- * Ethernet looks like this : This bit is variable sized however...
- */
- unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */
- unsigned char ar_sip[4]; /* sender IP address */
- unsigned char ar_tha[ETH_ALEN]; /* target hardware address */
- unsigned char ar_tip[4]; /* target IP address */
-#endif
-
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/if_arp.h>
static inline struct arphdr *arp_hdr(const struct sk_buff *skb)
{
@@ -168,6 +36,4 @@
/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2;
}
-#endif
-
#endif /* _LINUX_IF_ARP_H */