ASoC: fsl: create fsl_utils to accommodate the common functions
There is some amount of code duplication between mpc8610_hpcd and
p1022_ds machine drivers, and the same code will be duplicated again
when another new machine driver is added. The patch creates fsl_utils
to accommodate the common functions to stop the code duplication.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 4662340..be79e73 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -14,12 +14,12 @@
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <linux/slab.h>
-#include <linux/of_i2c.h>
#include <sound/soc.h>
#include <asm/fsl_guts.h>
#include "fsl_dma.h"
#include "fsl_ssi.h"
+#include "fsl_utils.h"
/* P1022-specific PMUXCR and DMUXCR bit definitions */
@@ -57,8 +57,6 @@
/* There's only one global utilities register */
static phys_addr_t guts_phys;
-#define DAI_NAME_SIZE 32
-
/**
* machine_data: machine-specific ASoC device data
*
@@ -191,136 +189,6 @@
};
/**
- * get_node_by_phandle_name - get a node by its phandle name
- *
- * This function takes a node, the name of a property in that node, and a
- * compatible string. Assuming the property is a phandle to another node,
- * it returns that node, (optionally) if that node is compatible.
- *
- * If the property is not a phandle, or the node it points to is not compatible
- * with the specific string, then NULL is returned.
- */
-static struct device_node *get_node_by_phandle_name(struct device_node *np,
- const char *name, const char *compatible)
-{
- np = of_parse_phandle(np, name, 0);
- if (!np)
- return NULL;
-
- if (!of_device_is_compatible(np, compatible)) {
- of_node_put(np);
- return NULL;
- }
-
- return np;
-}
-
-/**
- * get_parent_cell_index -- return the cell-index of the parent of a node
- *
- * Return the value of the cell-index property of the parent of the given
- * node. This is used for DMA channel nodes that need to know the DMA ID
- * of the controller they are on.
- */
-static int get_parent_cell_index(struct device_node *np)
-{
- struct device_node *parent = of_get_parent(np);
- const u32 *iprop;
- int ret = -1;
-
- if (!parent)
- return -1;
-
- iprop = of_get_property(parent, "cell-index", NULL);
- if (iprop)
- ret = be32_to_cpup(iprop);
-
- of_node_put(parent);
-
- return ret;
-}
-
-/**
- * codec_node_dev_name - determine the dev_name for a codec node
- *
- * This function determines the dev_name for an I2C node. This is the name
- * that would be returned by dev_name() if this device_node were part of a
- * 'struct device' It's ugly and hackish, but it works.
- *
- * The dev_name for such devices include the bus number and I2C address. For
- * example, "cs4270-codec.0-004f".
- */
-static int codec_node_dev_name(struct device_node *np, char *buf, size_t len)
-{
- const u32 *iprop;
- int addr;
- char temp[DAI_NAME_SIZE];
- struct i2c_client *i2c;
-
- of_modalias_node(np, temp, DAI_NAME_SIZE);
-
- iprop = of_get_property(np, "reg", NULL);
- if (!iprop)
- return -EINVAL;
-
- addr = be32_to_cpup(iprop);
-
- /* We need the adapter number */
- i2c = of_find_i2c_device_by_node(np);
- if (!i2c)
- return -ENODEV;
-
- snprintf(buf, len, "%s.%u-%04x", temp, i2c->adapter->nr, addr);
-
- return 0;
-}
-
-static int get_dma_channel(struct device_node *ssi_np,
- const char *name,
- struct snd_soc_dai_link *dai,
- unsigned int *dma_channel_id,
- unsigned int *dma_id)
-{
- struct resource res;
- struct device_node *dma_channel_np;
- const u32 *iprop;
- int ret;
-
- dma_channel_np = get_node_by_phandle_name(ssi_np, name,
- "fsl,ssi-dma-channel");
- if (!dma_channel_np)
- return -EINVAL;
-
- /* Determine the dev_name for the device_node. This code mimics the
- * behavior of of_device_make_bus_id(). We need this because ASoC uses
- * the dev_name() of the device to match the platform (DMA) device with
- * the CPU (SSI) device. It's all ugly and hackish, but it works (for
- * now).
- *
- * dai->platform name should already point to an allocated buffer.
- */
- ret = of_address_to_resource(dma_channel_np, 0, &res);
- if (ret) {
- of_node_put(dma_channel_np);
- return ret;
- }
- snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s",
- (unsigned long long) res.start, dma_channel_np->name);
-
- iprop = of_get_property(dma_channel_np, "cell-index", NULL);
- if (!iprop) {
- of_node_put(dma_channel_np);
- return -EINVAL;
- }
-
- *dma_channel_id = be32_to_cpup(iprop);
- *dma_id = get_parent_cell_index(dma_channel_np);
- of_node_put(dma_channel_np);
-
- return 0;
-}
-
-/**
* p1022_ds_probe: platform probe function for the machine driver
*
* Although this is a machine driver, the SSI node is the "master" node with
@@ -358,7 +226,8 @@
mdata->dai[0].ops = &p1022_ds_ops;
/* Determine the codec name, it will be used as the codec DAI name */
- ret = codec_node_dev_name(codec_np, mdata->codec_name, DAI_NAME_SIZE);
+ ret = fsl_asoc_get_codec_dev_name(codec_np, mdata->codec_name,
+ DAI_NAME_SIZE);
if (ret) {
dev_err(&pdev->dev, "invalid codec node %s\n",
codec_np->full_name);
@@ -462,9 +331,9 @@
/* Find the playback DMA channel to use. */
mdata->dai[0].platform_name = mdata->platform_name[0];
- ret = get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],
- &mdata->dma_channel_id[0],
- &mdata->dma_id[0]);
+ ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],
+ &mdata->dma_channel_id[0],
+ &mdata->dma_id[0]);
if (ret) {
dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n");
goto error;
@@ -472,9 +341,9 @@
/* Find the capture DMA channel to use. */
mdata->dai[1].platform_name = mdata->platform_name[1];
- ret = get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1],
- &mdata->dma_channel_id[1],
- &mdata->dma_id[1]);
+ ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1],
+ &mdata->dma_channel_id[1],
+ &mdata->dma_id[1]);
if (ret) {
dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n");
goto error;