ssb: Fix PCMCIA-host lowlevel bus access
This fixes the lowlevel bus access routines for
PCMCIA based devices.
There are still a few issues with register access sideeffects after
this patch. This will be addressed in a later patch.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index b6abee8..bb44a76 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -63,17 +63,17 @@
err = pcmcia_access_configuration_register(pdev, ®);
if (err != CS_SUCCESS)
goto error;
- read_addr |= (reg.Value & 0xF) << 12;
+ read_addr |= ((u32)(reg.Value & 0x0F)) << 12;
reg.Offset = 0x30;
err = pcmcia_access_configuration_register(pdev, ®);
if (err != CS_SUCCESS)
goto error;
- read_addr |= reg.Value << 16;
+ read_addr |= ((u32)reg.Value) << 16;
reg.Offset = 0x32;
err = pcmcia_access_configuration_register(pdev, ®);
if (err != CS_SUCCESS)
goto error;
- read_addr |= reg.Value << 24;
+ read_addr |= ((u32)reg.Value) << 24;
cur_core = (read_addr - SSB_ENUM_BASE) / SSB_CORE_SIZE;
if (cur_core == coreidx)
@@ -152,28 +152,29 @@
goto out_unlock;
}
-/* These are the main device register access functions.
- * do_select_core is inline to have the likely hotpath inline.
- * All unlikely codepaths are out-of-line. */
-static inline int do_select_core(struct ssb_bus *bus,
- struct ssb_device *dev,
- u16 *offset)
+static int select_core_and_segment(struct ssb_device *dev,
+ u16 *offset)
{
+ struct ssb_bus *bus = dev->bus;
int err;
- u8 need_seg = (*offset >= 0x800) ? 1 : 0;
+ u8 need_segment;
+
+ if (*offset >= 0x800) {
+ *offset -= 0x800;
+ need_segment = 1;
+ } else
+ need_segment = 0;
if (unlikely(dev != bus->mapped_device)) {
err = ssb_pcmcia_switch_core(bus, dev);
if (unlikely(err))
return err;
}
- if (unlikely(need_seg != bus->mapped_pcmcia_seg)) {
- err = ssb_pcmcia_switch_segment(bus, need_seg);
+ if (unlikely(need_segment != bus->mapped_pcmcia_seg)) {
+ err = ssb_pcmcia_switch_segment(bus, need_segment);
if (unlikely(err))
return err;
}
- if (need_seg == 1)
- *offset -= 0x800;
return 0;
}
@@ -181,32 +182,31 @@
static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
- u16 x;
- if (unlikely(do_select_core(bus, dev, &offset)))
+ if (unlikely(select_core_and_segment(dev, &offset)))
return 0xFFFF;
- x = readw(bus->mmio + offset);
- return x;
+ return readw(bus->mmio + offset);
}
static u32 ssb_pcmcia_read32(struct ssb_device *dev, u16 offset)
{
struct ssb_bus *bus = dev->bus;
- u32 x;
+ u32 lo, hi;
- if (unlikely(do_select_core(bus, dev, &offset)))
+ if (unlikely(select_core_and_segment(dev, &offset)))
return 0xFFFFFFFF;
- x = readl(bus->mmio + offset);
+ lo = readw(bus->mmio + offset);
+ hi = readw(bus->mmio + offset + 2);
- return x;
+ return (lo | (hi << 16));
}
static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value)
{
struct ssb_bus *bus = dev->bus;
- if (unlikely(do_select_core(bus, dev, &offset)))
+ if (unlikely(select_core_and_segment(dev, &offset)))
return;
writew(value, bus->mmio + offset);
}
@@ -215,12 +215,12 @@
{
struct ssb_bus *bus = dev->bus;
- if (unlikely(do_select_core(bus, dev, &offset)))
+ if (unlikely(select_core_and_segment(dev, &offset)))
return;
- readw(bus->mmio + offset);
- writew(value >> 16, bus->mmio + offset + 2);
- readw(bus->mmio + offset);
- writew(value, bus->mmio + offset);
+ writeb((value & 0xFF000000) >> 24, bus->mmio + offset + 3);
+ writeb((value & 0x00FF0000) >> 16, bus->mmio + offset + 2);
+ writeb((value & 0x0000FF00) >> 8, bus->mmio + offset + 1);
+ writeb((value & 0x000000FF) >> 0, bus->mmio + offset + 0);
}
/* Not "static", as it's used in main.c */