tg3: Enable PLL PD when CLKREQ disabled for 5717A0
PCIe PLL power down cannot be used if CLKREQ is enabled because data
corruption will occur. If CLKREQ is disabled though, enabling PCIE P1
PLL power-down saves some power.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index cd30889..44a505d 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1540,6 +1540,8 @@
#define GRC_MODE_HOST_SENDBDS 0x00020000
#define GRC_MODE_NO_TX_PHDR_CSUM 0x00100000
#define GRC_MODE_NVRAM_WR_ENABLE 0x00200000
+#define GRC_MODE_PCIE_TL_SEL 0x00000000
+#define GRC_MODE_PCIE_PL_SEL 0x00400000
#define GRC_MODE_NO_RX_PHDR_CSUM 0x00800000
#define GRC_MODE_IRQ_ON_TX_CPU_ATTN 0x01000000
#define GRC_MODE_IRQ_ON_RX_CPU_ATTN 0x02000000
@@ -1547,7 +1549,13 @@
#define GRC_MODE_IRQ_ON_DMA_ATTN 0x08000000
#define GRC_MODE_IRQ_ON_FLOW_ATTN 0x10000000
#define GRC_MODE_4X_NIC_SEND_RINGS 0x20000000
+#define GRC_MODE_PCIE_DL_SEL 0x20000000
#define GRC_MODE_MCAST_FRM_ENABLE 0x40000000
+#define GRC_MODE_PCIE_HI_1K_EN 0x80000000
+#define GRC_MODE_PCIE_PORT_MASK (GRC_MODE_PCIE_TL_SEL | \
+ GRC_MODE_PCIE_PL_SEL | \
+ GRC_MODE_PCIE_DL_SEL | \
+ GRC_MODE_PCIE_HI_1K_EN)
#define GRC_MISC_CFG 0x00006804
#define GRC_MISC_CFG_CORECLK_RESET 0x00000001
#define GRC_MISC_CFG_PRESCALAR_MASK 0x000000fe
@@ -1801,6 +1809,11 @@
/* 0x7e74 --> 0x8000 unused */
+/* Alternate PCIE definitions */
+#define TG3_PCIE_TLDLPL_PORT 0x00007c00
+#define TG3_PCIE_PL_LO_PHYCTL1 0x00000004
+#define TG3_PCIE_PL_LO_PHYCTL1_L1PLLPD_EN 0x00001000
+
/* OTP bit definitions */
#define TG3_OTP_AGCTGT_MASK 0x000000e0
#define TG3_OTP_AGCTGT_SHIFT 1
@@ -2809,6 +2822,7 @@
#define TG3_FLG3_40BIT_DMA_LIMIT_BUG 0x00100000
#define TG3_FLG3_SHORT_DMA_BUG 0x00200000
#define TG3_FLG3_USE_JUMBO_BDFLAG 0x00400000
+#define TG3_FLG3_L1PLLPD_EN 0x00800000
struct timer_list timer;
u16 timer_counter;