| /* |
| * Sharp VA3A5JZ921 One Seg Broadcast Module driver |
| * This device is labeled as just S. 921 at the top of the frontend can |
| * |
| * Copyright (C) 2009-2010 Mauro Carvalho Chehab |
| * Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com> |
| * |
| * Developed for Leadership SBTVD 1seg device sold in Brazil |
| * |
| * Frontend module based on cx24123 driver, getting some info from |
| * the old s921 driver. |
| * |
| * FIXME: Need to port to DVB v5.2 API |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <asm/div64.h> |
| |
| #include "dvb_frontend.h" |
| #include "s921.h" |
| |
| static int debug = 1; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); |
| |
| #define rc(args...) do { \ |
| printk(KERN_ERR "s921: " args); \ |
| } while (0) |
| |
| #define dprintk(args...) \ |
| do { \ |
| if (debug) { \ |
| printk(KERN_DEBUG "s921: %s: ", __func__); \ |
| printk(args); \ |
| } \ |
| } while (0) |
| |
| struct s921_state { |
| struct i2c_adapter *i2c; |
| const struct s921_config *config; |
| |
| struct dvb_frontend frontend; |
| |
| /* The Demod can't easily provide these, we cache them */ |
| u32 currentfreq; |
| }; |
| |
| /* |
| * Various tuner defaults need to be established for a given frequency kHz. |
| * fixme: The bounds on the bands do not match the doc in real life. |
| * fixme: Some of them have been moved, other might need adjustment. |
| */ |
| static struct s921_bandselect_val { |
| u32 freq_low; |
| u8 band_reg; |
| } s921_bandselect[] = { |
| { 0, 0x7b }, |
| { 485140000, 0x5b }, |
| { 515140000, 0x3b }, |
| { 545140000, 0x1b }, |
| { 599140000, 0xfb }, |
| { 623140000, 0xdb }, |
| { 659140000, 0xbb }, |
| { 713140000, 0x9b }, |
| }; |
| |
| struct regdata { |
| u8 reg; |
| u8 data; |
| }; |
| |
| static struct regdata s921_init[] = { |
| { 0x01, 0x80 }, /* Probably, a reset sequence */ |
| { 0x01, 0x40 }, |
| { 0x01, 0x80 }, |
| { 0x01, 0x40 }, |
| |
| { 0x02, 0x00 }, |
| { 0x03, 0x40 }, |
| { 0x04, 0x01 }, |
| { 0x05, 0x00 }, |
| { 0x06, 0x00 }, |
| { 0x07, 0x00 }, |
| { 0x08, 0x00 }, |
| { 0x09, 0x00 }, |
| { 0x0a, 0x00 }, |
| { 0x0b, 0x5a }, |
| { 0x0c, 0x00 }, |
| { 0x0d, 0x00 }, |
| { 0x0f, 0x00 }, |
| { 0x13, 0x1b }, |
| { 0x14, 0x80 }, |
| { 0x15, 0x40 }, |
| { 0x17, 0x70 }, |
| { 0x18, 0x01 }, |
| { 0x19, 0x12 }, |
| { 0x1a, 0x01 }, |
| { 0x1b, 0x12 }, |
| { 0x1c, 0xa0 }, |
| { 0x1d, 0x00 }, |
| { 0x1e, 0x0a }, |
| { 0x1f, 0x08 }, |
| { 0x20, 0x40 }, |
| { 0x21, 0xff }, |
| { 0x22, 0x4c }, |
| { 0x23, 0x4e }, |
| { 0x24, 0x4c }, |
| { 0x25, 0x00 }, |
| { 0x26, 0x00 }, |
| { 0x27, 0xf4 }, |
| { 0x28, 0x60 }, |
| { 0x29, 0x88 }, |
| { 0x2a, 0x40 }, |
| { 0x2b, 0x40 }, |
| { 0x2c, 0xff }, |
| { 0x2d, 0x00 }, |
| { 0x2e, 0xff }, |
| { 0x2f, 0x00 }, |
| { 0x30, 0x20 }, |
| { 0x31, 0x06 }, |
| { 0x32, 0x0c }, |
| { 0x34, 0x0f }, |
| { 0x37, 0xfe }, |
| { 0x38, 0x00 }, |
| { 0x39, 0x63 }, |
| { 0x3a, 0x10 }, |
| { 0x3b, 0x10 }, |
| { 0x47, 0x00 }, |
| { 0x49, 0xe5 }, |
| { 0x4b, 0x00 }, |
| { 0x50, 0xc0 }, |
| { 0x52, 0x20 }, |
| { 0x54, 0x5a }, |
| { 0x55, 0x5b }, |
| { 0x56, 0x40 }, |
| { 0x57, 0x70 }, |
| { 0x5c, 0x50 }, |
| { 0x5d, 0x00 }, |
| { 0x62, 0x17 }, |
| { 0x63, 0x2f }, |
| { 0x64, 0x6f }, |
| { 0x68, 0x00 }, |
| { 0x69, 0x89 }, |
| { 0x6a, 0x00 }, |
| { 0x6b, 0x00 }, |
| { 0x6c, 0x00 }, |
| { 0x6d, 0x00 }, |
| { 0x6e, 0x00 }, |
| { 0x70, 0x10 }, |
| { 0x71, 0x00 }, |
| { 0x75, 0x00 }, |
| { 0x76, 0x30 }, |
| { 0x77, 0x01 }, |
| { 0xaf, 0x00 }, |
| { 0xb0, 0xa0 }, |
| { 0xb2, 0x3d }, |
| { 0xb3, 0x25 }, |
| { 0xb4, 0x8b }, |
| { 0xb5, 0x4b }, |
| { 0xb6, 0x3f }, |
| { 0xb7, 0xff }, |
| { 0xb8, 0xff }, |
| { 0xb9, 0xfc }, |
| { 0xba, 0x00 }, |
| { 0xbb, 0x00 }, |
| { 0xbc, 0x00 }, |
| { 0xd0, 0x30 }, |
| { 0xe4, 0x84 }, |
| { 0xf0, 0x48 }, |
| { 0xf1, 0x19 }, |
| { 0xf2, 0x5a }, |
| { 0xf3, 0x8e }, |
| { 0xf4, 0x2d }, |
| { 0xf5, 0x07 }, |
| { 0xf6, 0x5a }, |
| { 0xf7, 0xba }, |
| { 0xf8, 0xd7 }, |
| }; |
| |
| static struct regdata s921_prefreq[] = { |
| { 0x47, 0x60 }, |
| { 0x68, 0x00 }, |
| { 0x69, 0x89 }, |
| { 0xf0, 0x48 }, |
| { 0xf1, 0x19 }, |
| }; |
| |
| static struct regdata s921_postfreq[] = { |
| { 0xf5, 0xae }, |
| { 0xf6, 0xb7 }, |
| { 0xf7, 0xba }, |
| { 0xf8, 0xd7 }, |
| { 0x68, 0x0a }, |
| { 0x69, 0x09 }, |
| }; |
| |
| static int s921_i2c_writereg(struct s921_state *state, |
| u8 i2c_addr, int reg, int data) |
| { |
| u8 buf[] = { reg, data }; |
| struct i2c_msg msg = { |
| .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2 |
| }; |
| int rc; |
| |
| rc = i2c_transfer(state->i2c, &msg, 1); |
| if (rc != 1) { |
| printk("%s: writereg rcor(rc == %i, reg == 0x%02x," |
| " data == 0x%02x)\n", __func__, rc, reg, data); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr, |
| struct regdata *rd, int size) |
| { |
| int i, rc; |
| |
| for (i = 0; i < size; i++) { |
| rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data); |
| if (rc < 0) |
| return rc; |
| } |
| return 0; |
| } |
| |
| static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg) |
| { |
| u8 val; |
| int rc; |
| struct i2c_msg msg[] = { |
| { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 }, |
| { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 } |
| }; |
| |
| rc = i2c_transfer(state->i2c, msg, 2); |
| |
| if (rc != 2) { |
| rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc); |
| return rc; |
| } |
| |
| return val; |
| } |
| |
| #define s921_readreg(state, reg) \ |
| s921_i2c_readreg(state, state->config->demod_address, reg) |
| #define s921_writereg(state, reg, val) \ |
| s921_i2c_writereg(state, state->config->demod_address, reg, val) |
| #define s921_writeregdata(state, regdata) \ |
| s921_i2c_writeregdata(state, state->config->demod_address, \ |
| regdata, ARRAY_SIZE(regdata)) |
| |
| static int s921_pll_tune(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct s921_state *state = fe->demodulator_priv; |
| int band, rc, i; |
| unsigned long f_offset; |
| u8 f_switch; |
| u64 offset; |
| |
| dprintk("frequency=%i\n", p->frequency); |
| |
| for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++) |
| if (p->frequency < s921_bandselect[band].freq_low) |
| break; |
| band--; |
| |
| if (band < 0) { |
| rc("%s: frequency out of range\n", __func__); |
| return -EINVAL; |
| } |
| |
| f_switch = s921_bandselect[band].band_reg; |
| |
| offset = ((u64)p->frequency) * 258; |
| do_div(offset, 6000000); |
| f_offset = ((unsigned long)offset) + 2321; |
| |
| rc = s921_writeregdata(state, s921_prefreq); |
| if (rc < 0) |
| return rc; |
| |
| rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff); |
| if (rc < 0) |
| return rc; |
| |
| rc = s921_writereg(state, 0xf3, f_offset & 0xff); |
| if (rc < 0) |
| return rc; |
| |
| rc = s921_writereg(state, 0xf4, f_switch); |
| if (rc < 0) |
| return rc; |
| |
| rc = s921_writeregdata(state, s921_postfreq); |
| if (rc < 0) |
| return rc; |
| |
| for (i = 0 ; i < 6; i++) { |
| rc = s921_readreg(state, 0x80); |
| dprintk("status 0x80: %02x\n", rc); |
| } |
| rc = s921_writereg(state, 0x01, 0x40); |
| if (rc < 0) |
| return rc; |
| |
| rc = s921_readreg(state, 0x01); |
| dprintk("status 0x01: %02x\n", rc); |
| |
| rc = s921_readreg(state, 0x80); |
| dprintk("status 0x80: %02x\n", rc); |
| |
| rc = s921_readreg(state, 0x80); |
| dprintk("status 0x80: %02x\n", rc); |
| |
| rc = s921_readreg(state, 0x32); |
| dprintk("status 0x32: %02x\n", rc); |
| |
| dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset); |
| |
| return 0; |
| } |
| |
| static int s921_initfe(struct dvb_frontend *fe) |
| { |
| struct s921_state *state = fe->demodulator_priv; |
| int rc; |
| |
| dprintk("\n"); |
| |
| rc = s921_writeregdata(state, s921_init); |
| if (rc < 0) |
| return rc; |
| |
| return 0; |
| } |
| |
| static int s921_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| struct s921_state *state = fe->demodulator_priv; |
| int regstatus, rc; |
| |
| *status = 0; |
| |
| rc = s921_readreg(state, 0x81); |
| if (rc < 0) |
| return rc; |
| |
| regstatus = rc << 8; |
| |
| rc = s921_readreg(state, 0x82); |
| if (rc < 0) |
| return rc; |
| |
| regstatus |= rc; |
| |
| dprintk("status = %04x\n", regstatus); |
| |
| /* Full Sync - We don't know what each bit means on regs 0x81/0x82 */ |
| if ((regstatus & 0xff) == 0x40) { |
| *status = FE_HAS_SIGNAL | |
| FE_HAS_CARRIER | |
| FE_HAS_VITERBI | |
| FE_HAS_SYNC | |
| FE_HAS_LOCK; |
| } else if (regstatus & 0x40) { |
| /* This is close to Full Sync, but not enough to get useful info */ |
| *status = FE_HAS_SIGNAL | |
| FE_HAS_CARRIER | |
| FE_HAS_VITERBI | |
| FE_HAS_SYNC; |
| } |
| |
| return 0; |
| } |
| |
| static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| enum fe_status status; |
| struct s921_state *state = fe->demodulator_priv; |
| int rc; |
| |
| /* FIXME: Use the proper register for it... 0x80? */ |
| rc = s921_read_status(fe, &status); |
| if (rc < 0) |
| return rc; |
| |
| *strength = (status & FE_HAS_LOCK) ? 0xffff : 0; |
| |
| dprintk("strength = 0x%04x\n", *strength); |
| |
| rc = s921_readreg(state, 0x01); |
| dprintk("status 0x01: %02x\n", rc); |
| |
| rc = s921_readreg(state, 0x80); |
| dprintk("status 0x80: %02x\n", rc); |
| |
| rc = s921_readreg(state, 0x32); |
| dprintk("status 0x32: %02x\n", rc); |
| |
| return 0; |
| } |
| |
| static int s921_set_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct s921_state *state = fe->demodulator_priv; |
| int rc; |
| |
| dprintk("\n"); |
| |
| /* FIXME: We don't know how to use non-auto mode */ |
| |
| rc = s921_pll_tune(fe); |
| if (rc < 0) |
| return rc; |
| |
| state->currentfreq = p->frequency; |
| |
| return 0; |
| } |
| |
| static int s921_get_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct s921_state *state = fe->demodulator_priv; |
| |
| /* FIXME: Probably it is possible to get it from regs f1 and f2 */ |
| p->frequency = state->currentfreq; |
| p->delivery_system = SYS_ISDBT; |
| |
| return 0; |
| } |
| |
| static int s921_tune(struct dvb_frontend *fe, |
| bool re_tune, |
| unsigned int mode_flags, |
| unsigned int *delay, |
| enum fe_status *status) |
| { |
| int rc = 0; |
| |
| dprintk("\n"); |
| |
| if (re_tune) |
| rc = s921_set_frontend(fe); |
| |
| if (!(mode_flags & FE_TUNE_MODE_ONESHOT)) |
| s921_read_status(fe, status); |
| |
| return rc; |
| } |
| |
| static int s921_get_algo(struct dvb_frontend *fe) |
| { |
| return 1; /* FE_ALGO_HW */ |
| } |
| |
| static void s921_release(struct dvb_frontend *fe) |
| { |
| struct s921_state *state = fe->demodulator_priv; |
| |
| dprintk("\n"); |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops s921_ops; |
| |
| struct dvb_frontend *s921_attach(const struct s921_config *config, |
| struct i2c_adapter *i2c) |
| { |
| /* allocate memory for the internal state */ |
| struct s921_state *state = |
| kzalloc(sizeof(struct s921_state), GFP_KERNEL); |
| |
| dprintk("\n"); |
| if (!state) { |
| rc("Unable to kzalloc\n"); |
| return NULL; |
| } |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &s921_ops, |
| sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| |
| return &state->frontend; |
| } |
| EXPORT_SYMBOL(s921_attach); |
| |
| static struct dvb_frontend_ops s921_ops = { |
| .delsys = { SYS_ISDBT }, |
| /* Use dib8000 values per default */ |
| .info = { |
| .name = "Sharp S921", |
| .frequency_min = 470000000, |
| /* |
| * Max should be 770MHz instead, according with Sharp docs, |
| * but Leadership doc says it works up to 806 MHz. This is |
| * required to get channel 69, used in Brazil |
| */ |
| .frequency_max = 806000000, |
| .frequency_tolerance = 0, |
| .caps = FE_CAN_INVERSION_AUTO | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | |
| FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | |
| FE_CAN_HIERARCHY_AUTO, |
| }, |
| |
| .release = s921_release, |
| |
| .init = s921_initfe, |
| .set_frontend = s921_set_frontend, |
| .get_frontend = s921_get_frontend, |
| .read_status = s921_read_status, |
| .read_signal_strength = s921_read_signal_strength, |
| .tune = s921_tune, |
| .get_frontend_algo = s921_get_algo, |
| }; |
| |
| MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware"); |
| MODULE_AUTHOR("Mauro Carvalho Chehab"); |
| MODULE_AUTHOR("Douglas Landgraf <dougsland@redhat.com>"); |
| MODULE_LICENSE("GPL"); |