RDMA/cxgb3: Shrink .text with compile-time init of handlers arrays
Using compile-time designated initializers for the handler arrays
instead of open-coding the initialization in iwch_cm_init() is (IMHO)
cleaner, and leads to substantially smaller code: on my x86-64 build,
bloat-o-meter shows:
add/remove: 0/1 grow/shrink: 4/3 up/down: 4/-1682 (-1678)
function old new delta
tx_ack 167 168 +1
state_set 55 56 +1
start_ep_timer 99 100 +1
pass_establish 177 178 +1
act_open_req_arp_failure 39 38 -1
sched 84 82 -2
iwch_cm_init 442 91 -351
work_handlers 1328 - -1328
Signed-off-by: Roland Dreier <rolandd@cisco.com>
diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c
index 63f975f..8e77dc5 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.c
+++ b/drivers/infiniband/hw/cxgb3/iwch.c
@@ -47,8 +47,6 @@
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION);
-cxgb3_cpl_handler_func t3c_handlers[NUM_CPL_CMDS];
-
static void open_rnic_dev(struct t3cdev *);
static void close_rnic_dev(struct t3cdev *);
static void iwch_event_handler(struct t3cdev *, u32, u32);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index cfd6db0..ebfb117 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -102,12 +102,9 @@
module_param(cong_flavor, uint, 0644);
MODULE_PARM_DESC(cong_flavor, "TCP Congestion control flavor (default=1)");
-static void process_work(struct work_struct *work);
static struct workqueue_struct *workq;
-static DECLARE_WORK(skb_work, process_work);
static struct sk_buff_head rxq;
-static cxgb3_cpl_handler_func work_handlers[NUM_CPL_CMDS];
static struct sk_buff *get_skb(struct sk_buff *skb, int len, gfp_t gfp);
static void ep_timeout(unsigned long arg);
@@ -302,27 +299,6 @@
put_ep(&ep->com);
}
-static void process_work(struct work_struct *work)
-{
- struct sk_buff *skb = NULL;
- void *ep;
- struct t3cdev *tdev;
- int ret;
-
- while ((skb = skb_dequeue(&rxq))) {
- ep = *((void **) (skb->cb));
- tdev = *((struct t3cdev **) (skb->cb + sizeof(void *)));
- ret = work_handlers[G_OPCODE(ntohl((__force __be32)skb->csum))](tdev, skb, ep);
- if (ret & CPL_RET_BUF_DONE)
- kfree_skb(skb);
-
- /*
- * ep was referenced in sched(), and is freed here.
- */
- put_ep((struct iwch_ep_common *)ep);
- }
-}
-
static int status2errno(int status)
{
switch (status) {
@@ -2157,7 +2133,49 @@
/*
* All the CM events are handled on a work queue to have a safe context.
+ * These are the real handlers that are called from the work queue.
*/
+static const cxgb3_cpl_handler_func work_handlers[NUM_CPL_CMDS] = {
+ [CPL_ACT_ESTABLISH] = act_establish,
+ [CPL_ACT_OPEN_RPL] = act_open_rpl,
+ [CPL_RX_DATA] = rx_data,
+ [CPL_TX_DMA_ACK] = tx_ack,
+ [CPL_ABORT_RPL_RSS] = abort_rpl,
+ [CPL_ABORT_RPL] = abort_rpl,
+ [CPL_PASS_OPEN_RPL] = pass_open_rpl,
+ [CPL_CLOSE_LISTSRV_RPL] = close_listsrv_rpl,
+ [CPL_PASS_ACCEPT_REQ] = pass_accept_req,
+ [CPL_PASS_ESTABLISH] = pass_establish,
+ [CPL_PEER_CLOSE] = peer_close,
+ [CPL_ABORT_REQ_RSS] = peer_abort,
+ [CPL_CLOSE_CON_RPL] = close_con_rpl,
+ [CPL_RDMA_TERMINATE] = terminate,
+ [CPL_RDMA_EC_STATUS] = ec_status,
+};
+
+static void process_work(struct work_struct *work)
+{
+ struct sk_buff *skb = NULL;
+ void *ep;
+ struct t3cdev *tdev;
+ int ret;
+
+ while ((skb = skb_dequeue(&rxq))) {
+ ep = *((void **) (skb->cb));
+ tdev = *((struct t3cdev **) (skb->cb + sizeof(void *)));
+ ret = work_handlers[G_OPCODE(ntohl((__force __be32)skb->csum))](tdev, skb, ep);
+ if (ret & CPL_RET_BUF_DONE)
+ kfree_skb(skb);
+
+ /*
+ * ep was referenced in sched(), and is freed here.
+ */
+ put_ep((struct iwch_ep_common *)ep);
+ }
+}
+
+static DECLARE_WORK(skb_work, process_work);
+
static int sched(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
{
struct iwch_ep_common *epc = ctx;
@@ -2189,6 +2207,29 @@
return CPL_RET_BUF_DONE;
}
+/*
+ * All upcalls from the T3 Core go to sched() to schedule the
+ * processing on a work queue.
+ */
+cxgb3_cpl_handler_func t3c_handlers[NUM_CPL_CMDS] = {
+ [CPL_ACT_ESTABLISH] = sched,
+ [CPL_ACT_OPEN_RPL] = sched,
+ [CPL_RX_DATA] = sched,
+ [CPL_TX_DMA_ACK] = sched,
+ [CPL_ABORT_RPL_RSS] = sched,
+ [CPL_ABORT_RPL] = sched,
+ [CPL_PASS_OPEN_RPL] = sched,
+ [CPL_CLOSE_LISTSRV_RPL] = sched,
+ [CPL_PASS_ACCEPT_REQ] = sched,
+ [CPL_PASS_ESTABLISH] = sched,
+ [CPL_PEER_CLOSE] = sched,
+ [CPL_CLOSE_CON_RPL] = sched,
+ [CPL_ABORT_REQ_RSS] = sched,
+ [CPL_RDMA_TERMINATE] = sched,
+ [CPL_RDMA_EC_STATUS] = sched,
+ [CPL_SET_TCB_RPL] = set_tcb_rpl,
+};
+
int __init iwch_cm_init(void)
{
skb_queue_head_init(&rxq);
@@ -2197,46 +2238,6 @@
if (!workq)
return -ENOMEM;
- /*
- * All upcalls from the T3 Core go to sched() to
- * schedule the processing on a work queue.
- */
- t3c_handlers[CPL_ACT_ESTABLISH] = sched;
- t3c_handlers[CPL_ACT_OPEN_RPL] = sched;
- t3c_handlers[CPL_RX_DATA] = sched;
- t3c_handlers[CPL_TX_DMA_ACK] = sched;
- t3c_handlers[CPL_ABORT_RPL_RSS] = sched;
- t3c_handlers[CPL_ABORT_RPL] = sched;
- t3c_handlers[CPL_PASS_OPEN_RPL] = sched;
- t3c_handlers[CPL_CLOSE_LISTSRV_RPL] = sched;
- t3c_handlers[CPL_PASS_ACCEPT_REQ] = sched;
- t3c_handlers[CPL_PASS_ESTABLISH] = sched;
- t3c_handlers[CPL_PEER_CLOSE] = sched;
- t3c_handlers[CPL_CLOSE_CON_RPL] = sched;
- t3c_handlers[CPL_ABORT_REQ_RSS] = sched;
- t3c_handlers[CPL_RDMA_TERMINATE] = sched;
- t3c_handlers[CPL_RDMA_EC_STATUS] = sched;
- t3c_handlers[CPL_SET_TCB_RPL] = set_tcb_rpl;
-
- /*
- * These are the real handlers that are called from a
- * work queue.
- */
- work_handlers[CPL_ACT_ESTABLISH] = act_establish;
- work_handlers[CPL_ACT_OPEN_RPL] = act_open_rpl;
- work_handlers[CPL_RX_DATA] = rx_data;
- work_handlers[CPL_TX_DMA_ACK] = tx_ack;
- work_handlers[CPL_ABORT_RPL_RSS] = abort_rpl;
- work_handlers[CPL_ABORT_RPL] = abort_rpl;
- work_handlers[CPL_PASS_OPEN_RPL] = pass_open_rpl;
- work_handlers[CPL_CLOSE_LISTSRV_RPL] = close_listsrv_rpl;
- work_handlers[CPL_PASS_ACCEPT_REQ] = pass_accept_req;
- work_handlers[CPL_PASS_ESTABLISH] = pass_establish;
- work_handlers[CPL_PEER_CLOSE] = peer_close;
- work_handlers[CPL_ABORT_REQ_RSS] = peer_abort;
- work_handlers[CPL_CLOSE_CON_RPL] = close_con_rpl;
- work_handlers[CPL_RDMA_TERMINATE] = terminate;
- work_handlers[CPL_RDMA_EC_STATUS] = ec_status;
return 0;
}