[MTD] NAND: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 6def3d3..1924a4f 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2004 Richard Purdie
*
- * $Id: sharpsl.c,v 1.6 2005/11/03 11:36:42 rpurdie Exp $
+ * $Id: sharpsl.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
*
* Based on Sharp's NAND driver sharp_sl.c
*
@@ -76,14 +76,14 @@
},
};
-/*
+/*
* hardware specific access to control-lines
*/
static void
sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd)
{
switch (cmd) {
- case NAND_CTL_SETCLE:
+ case NAND_CTL_SETCLE:
writeb(readb(FLASHCTL) | FLCLE, FLASHCTL);
break;
case NAND_CTL_CLRCLE:
@@ -97,10 +97,10 @@
writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL);
break;
- case NAND_CTL_SETNCE:
+ case NAND_CTL_SETNCE:
writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL);
break;
- case NAND_CTL_CLRNCE:
+ case NAND_CTL_CLRNCE:
writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL);
break;
}
@@ -126,8 +126,8 @@
.useecc = MTD_NANDECC_AUTOPLACE,
.eccbytes = 24,
.eccpos = {
- 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
- 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+ 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
+ 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
.oobfree = { {0x08, 0x09} }
};
@@ -177,7 +177,7 @@
printk ("Unable to allocate SharpSL NAND MTD device structure.\n");
return -ENOMEM;
}
-
+
/* map physical adress */
sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000);
if(!sharpsl_io_base){
@@ -185,7 +185,7 @@
kfree(sharpsl_mtd);
return -EIO;
}
-
+
/* Get pointer to private data */
this = (struct nand_chip *) (&sharpsl_mtd[1]);
@@ -211,7 +211,7 @@
this->chip_delay = 15;
/* set eccmode using hardware ECC */
this->eccmode = NAND_ECC_HW3_256;
- this->badblock_pattern = &sharpsl_bbt;
+ this->badblock_pattern = &sharpsl_bbt;
if (machine_is_akita() || machine_is_borzoi()) {
this->badblock_pattern = &sharpsl_akita_bbt;
this->autooob = &akita_oobinfo;
@@ -232,7 +232,7 @@
sharpsl_mtd->name = "sharpsl-nand";
nr_partitions = parse_mtd_partitions(sharpsl_mtd, part_probes,
&sharpsl_partition_info, 0);
-
+
if (nr_partitions <= 0) {
nr_partitions = DEFAULT_NUM_PARTITIONS;
sharpsl_partition_info = sharpsl_nand_default_partition_info;