Blackfin: bf538: add support for extended GPIO banks
The GPIOs on ports C/D/E on the BF538/BF539 do not behave the same way as
the other ports on the part and the same way as all other Blackfin parts.
The MMRs are programmed slightly different and they cannot be used to
generate interrupts or wakeup a sleeping system. Since these guys don't
fit into the existing code, create a simple gpiolib driver for them.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
diff --git a/arch/blackfin/mach-bf538/ext-gpio.c b/arch/blackfin/mach-bf538/ext-gpio.c
new file mode 100644
index 0000000..180b125
--- /dev/null
+++ b/arch/blackfin/mach-bf538/ext-gpio.c
@@ -0,0 +1,123 @@
+/*
+ * GPIOLIB interface for BF538/9 PORT C, D, and E GPIOs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+
+#define DEFINE_REG(reg, off) \
+static inline u16 read_##reg(void __iomem *port) \
+ { return bfin_read16(port + off); } \
+static inline void write_##reg(void __iomem *port, u16 v) \
+ { bfin_write16(port + off, v); }
+
+DEFINE_REG(PORTIO, 0x00)
+DEFINE_REG(PORTIO_CLEAR, 0x10)
+DEFINE_REG(PORTIO_SET, 0x20)
+DEFINE_REG(PORTIO_DIR, 0x40)
+DEFINE_REG(PORTIO_INEN, 0x50)
+
+static void __iomem *gpio_chip_to_mmr(struct gpio_chip *chip)
+{
+ switch (chip->base) {
+ default: /* not really needed, but keeps gcc happy */
+ case GPIO_PC0: return (void __iomem *)PORTCIO;
+ case GPIO_PD0: return (void __iomem *)PORTDIO;
+ case GPIO_PE0: return (void __iomem *)PORTEIO;
+ }
+}
+
+static int bf538_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ void __iomem *port = gpio_chip_to_mmr(chip);
+ return !!(read_PORTIO(port) & (1u << gpio));
+}
+
+static void bf538_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ void __iomem *port = gpio_chip_to_mmr(chip);
+ if (value)
+ write_PORTIO_SET(port, (1u << gpio));
+ else
+ write_PORTIO_CLEAR(port, (1u << gpio));
+}
+
+static int bf538_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ void __iomem *port = gpio_chip_to_mmr(chip);
+ write_PORTIO_DIR(port, read_PORTIO_DIR(port) & ~(1u << gpio));
+ write_PORTIO_INEN(port, read_PORTIO_INEN(port) | (1u << gpio));
+ return 0;
+}
+
+static int bf538_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ void __iomem *port = gpio_chip_to_mmr(chip);
+ write_PORTIO_INEN(port, read_PORTIO_INEN(port) & ~(1u << gpio));
+ bf538_gpio_set_value(port, gpio, value);
+ write_PORTIO_DIR(port, read_PORTIO_DIR(port) | (1u << gpio));
+ return 0;
+}
+
+static int bf538_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+ return bfin_special_gpio_request(chip->base + gpio, chip->label);
+}
+
+static void bf538_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+ return bfin_special_gpio_free(chip->base + gpio);
+}
+
+/* We don't set the irq fields as these banks cannot generate interrupts */
+
+static struct gpio_chip bf538_portc_chip = {
+ .label = "GPIO-PC",
+ .direction_input = bf538_gpio_direction_input,
+ .get = bf538_gpio_get_value,
+ .direction_output = bf538_gpio_direction_output,
+ .set = bf538_gpio_set_value,
+ .request = bf538_gpio_request,
+ .free = bf538_gpio_free,
+ .base = GPIO_PC0,
+ .ngpio = GPIO_PC9 - GPIO_PC0 + 1,
+};
+
+static struct gpio_chip bf538_portd_chip = {
+ .label = "GPIO-PD",
+ .direction_input = bf538_gpio_direction_input,
+ .get = bf538_gpio_get_value,
+ .direction_output = bf538_gpio_direction_output,
+ .set = bf538_gpio_set_value,
+ .request = bf538_gpio_request,
+ .free = bf538_gpio_free,
+ .base = GPIO_PD0,
+ .ngpio = GPIO_PD13 - GPIO_PD0 + 1,
+};
+
+static struct gpio_chip bf538_porte_chip = {
+ .label = "GPIO-PE",
+ .direction_input = bf538_gpio_direction_input,
+ .get = bf538_gpio_get_value,
+ .direction_output = bf538_gpio_direction_output,
+ .set = bf538_gpio_set_value,
+ .request = bf538_gpio_request,
+ .free = bf538_gpio_free,
+ .base = GPIO_PE0,
+ .ngpio = GPIO_PE15 - GPIO_PE0 + 1,
+};
+
+static int __init bf538_extgpio_setup(void)
+{
+ return gpiochip_add(&bf538_portc_chip) |
+ gpiochip_add(&bf538_portd_chip) |
+ gpiochip_add(&bf538_porte_chip);
+}
+arch_initcall(bf538_extgpio_setup);