V4L/DVB (13238): v4l2_subdev: rename tuner s_standby operation to core s_power
Upcoming I2C v4l2_subdev drivers need a way to control the subdevice
power state from the core. This use case is already partially covered by
the tuner s_standby operation, but no way to explicitly come back from
the standby state is available.
Rename the tuner s_standby operation to core s_power, and fix tuner
drivers accordingly. The tuner core will call s_power(0) instead of
s_standby(). No explicit call to s_power(1) is required for tuners as
they are supposed to wake up from standby automatically.
[mchehab@redhat.com: CodingStyle fix]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 51527d7..1485aee 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -830,7 +830,7 @@
au0828_uninit_isoc(dev);
/* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
/* When close the device, set the usb intf0 into alt0 to free
USB bandwidth */
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index 3650372..d095aa0 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -2106,7 +2106,7 @@
}
/* Save some power by putting tuner to sleep */
- call_all(dev, tuner, s_standby);
+ call_all(dev, core, s_power, 0);
/* do this before setting alternate! */
cx231xx_uninit_isoc(dev);
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index d6e41db..e34a4ec 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -919,7 +919,7 @@
cx23885_i2c_register(&dev->i2c_bus[1]);
cx23885_i2c_register(&dev->i2c_bus[2]);
cx23885_card_setup(dev);
- call_all(dev, tuner, s_standby);
+ call_all(dev, core, s_power, 0);
cx23885_ir_init(dev);
if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) {
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 4d439f2..f4f046c 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -920,7 +920,7 @@
fe0->dvb.frontend->callback = cx23885_tuner_callback;
/* Put the analog decoder in standby to keep it quiet */
- call_all(dev, tuner, s_standby);
+ call_all(dev, core, s_power, 0);
if (fe0->dvb.frontend->ops.analog_ops.standby)
fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 33be636..7330a2d 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -3267,7 +3267,7 @@
ctl.fname);
call_all(core, tuner, s_config, &xc2028_cfg);
}
- call_all(core, tuner, s_standby);
+ call_all(core, core, s_power, 0);
}
/* ------------------------------------------------------------------ */
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index d9e402b..9df71d0 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -1170,7 +1170,7 @@
fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
- call_all(core, tuner, s_standby);
+ call_all(core, core, s_power, 0);
/* register everything */
return videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 57e6b12..d7e8fce 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -935,7 +935,7 @@
mutex_lock(&dev->core->lock);
if(atomic_dec_and_test(&dev->core->users))
- call_all(dev->core, tuner, s_standby);
+ call_all(dev->core, core, s_power, 0);
mutex_unlock(&dev->core->lock);
return 0;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 6c7cbbc..1e19370 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2658,7 +2658,7 @@
em28xx_init_extension(dev);
/* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
return 0;
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 3a1dfb7..fbe536f 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -2225,7 +2225,7 @@
}
/* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
/* do this before setting alternate! */
em28xx_uninit_isoc(dev);
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index f87757f..9a5df93 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -1032,7 +1032,7 @@
saa7134_irq_video_signalchange(dev);
if (TUNER_ABSENT != dev->tuner_type)
- saa_call_all(dev, tuner, s_standby);
+ saa_call_all(dev, core, s_power, 0);
/* register v4l devices */
if (saa7134_no_overlay > 0)
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index da26f47..35f8daa 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1499,7 +1499,7 @@
saa_andorb(SAA7134_OFMT_DATA_A, 0x1f, 0);
saa_andorb(SAA7134_OFMT_DATA_B, 0x1f, 0);
- saa_call_all(dev, tuner, s_standby);
+ saa_call_all(dev, core, s_power, 0);
if (fh->radio)
saa_call_all(dev, core, ioctl, RDS_CMD_CLOSE, &cmd);
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index aba92e2..50f6db5 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -752,14 +752,17 @@
return 0;
}
-static int tuner_s_standby(struct v4l2_subdev *sd)
+static int tuner_s_power(struct v4l2_subdev *sd, int on)
{
struct tuner *t = to_tuner(sd);
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
+ if (on)
+ return 0;
+
tuner_dbg("Putting tuner to sleep\n");
- if (check_mode(t, "s_standby") == -EINVAL)
+ if (check_mode(t, "s_power") == -EINVAL)
return 0;
t->mode = T_STANDBY;
if (analog_ops->standby)
@@ -961,6 +964,7 @@
static const struct v4l2_subdev_core_ops tuner_core_ops = {
.log_status = tuner_log_status,
.s_std = tuner_s_std,
+ .s_power = tuner_s_power,
};
static const struct v4l2_subdev_tuner_ops tuner_tuner_ops = {
@@ -971,7 +975,6 @@
.g_frequency = tuner_g_frequency,
.s_type_addr = tuner_s_type_addr,
.s_config = tuner_s_config,
- .s_standby = tuner_s_standby,
};
static const struct v4l2_subdev_ops tuner_ops = {
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index ecc2818..88c13d6 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -106,6 +106,9 @@
s_gpio: set GPIO pins. Very simple right now, might need to be extended with
a direction argument if needed.
+
+ s_power: puts subdevice in power saving mode (on == 0) or normal operation
+ mode (on == 1).
*/
struct v4l2_subdev_core_ops {
int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
@@ -128,6 +131,7 @@
int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
#endif
+ int (*s_power)(struct v4l2_subdev *sd, int on);
};
/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio.
@@ -137,8 +141,6 @@
s_type_addr: sets tuner type and its I2C addr.
s_config: sets tda9887 specific stuff, like port1, port2 and qss
-
- s_standby: puts tuner on powersaving state, disabling it, except for i2c.
*/
struct v4l2_subdev_tuner_ops {
int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type);
@@ -151,7 +153,6 @@
int (*s_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
- int (*s_standby)(struct v4l2_subdev *sd);
};
/* s_clock_freq: set the frequency (in Hz) of the audio clock output.