wil6210: add bcast structures to WMI
Sync with the wmi definitions from the firmware team
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 0979650..b290553 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -70,7 +70,6 @@
WMI_SET_UCODE_IDLE_CMDID = 0x0813,
WMI_SET_WORK_MODE_CMDID = 0x0815,
WMI_LO_LEAKAGE_CALIB_CMDID = 0x0816,
- WMI_MARLON_R_ACTIVATE_CMDID = 0x0817,
WMI_MARLON_R_READ_CMDID = 0x0818,
WMI_MARLON_R_WRITE_CMDID = 0x0819,
WMI_MARLON_R_TXRX_SEL_CMDID = 0x081a,
@@ -80,6 +79,7 @@
WMI_RF_RX_TEST_CMDID = 0x081e,
WMI_CFG_RX_CHAIN_CMDID = 0x0820,
WMI_VRING_CFG_CMDID = 0x0821,
+ WMI_BCAST_VRING_CFG_CMDID = 0x0822,
WMI_VRING_BA_EN_CMDID = 0x0823,
WMI_VRING_BA_DIS_CMDID = 0x0824,
WMI_RCP_ADDBA_RESP_CMDID = 0x0825,
@@ -99,6 +99,7 @@
WMI_BF_TXSS_MGMT_CMDID = 0x0837,
WMI_BF_SM_MGMT_CMDID = 0x0838,
WMI_BF_RXSS_MGMT_CMDID = 0x0839,
+ WMI_BF_TRIG_CMDID = 0x083A,
WMI_SET_SECTORS_CMDID = 0x0849,
WMI_MAINTAIN_PAUSE_CMDID = 0x0850,
WMI_MAINTAIN_RESUME_CMDID = 0x0851,
@@ -596,6 +597,22 @@
} __packed;
/*
+ * WMI_BCAST_VRING_CFG_CMDID
+ */
+struct wmi_bcast_vring_cfg {
+ struct wmi_sw_ring_cfg tx_sw_ring;
+ u8 ringid; /* 0-23 vrings */
+ u8 encap_trans_type;
+ u8 ds_cfg; /* 802.3 DS cfg */
+ u8 nwifi_ds_trans_type;
+} __packed;
+
+struct wmi_bcast_vring_cfg_cmd {
+ __le32 action;
+ struct wmi_bcast_vring_cfg vring_cfg;
+} __packed;
+
+/*
* WMI_VRING_BA_EN_CMDID
*/
struct wmi_vring_ba_en_cmd {
@@ -844,7 +861,6 @@
WMI_IQ_RX_CALIB_DONE_EVENTID = 0x1812,
WMI_SET_WORK_MODE_DONE_EVENTID = 0x1815,
WMI_LO_LEAKAGE_CALIB_DONE_EVENTID = 0x1816,
- WMI_MARLON_R_ACTIVATE_DONE_EVENTID = 0x1817,
WMI_MARLON_R_READ_DONE_EVENTID = 0x1818,
WMI_MARLON_R_WRITE_DONE_EVENTID = 0x1819,
WMI_MARLON_R_TXRX_SEL_DONE_EVENTID = 0x181a,