iwlagn: priv->status moves to iwl_shared
Since it is used by all the layers, it needs to move to iwl_shared.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index a3e2ef4..e77c4c4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -247,7 +247,7 @@
struct iwl_priv *priv =
container_of(work, struct iwl_priv, bt_runtime_config);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
/* dont send host command if rf-kill is on */
@@ -264,7 +264,7 @@
mutex_lock(&priv->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
goto out;
/* dont send host command if rf-kill is on */
@@ -303,7 +303,7 @@
{
struct iwl_priv *priv = (struct iwl_priv *)data;
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
/* dont send host command if rf-kill is on */
@@ -424,7 +424,7 @@
{
struct iwl_priv *priv = (struct iwl_priv *)data;
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
if (priv->event_log.ucode_trace) {
@@ -440,7 +440,7 @@
struct iwl_priv *priv =
container_of(work, struct iwl_priv, tx_flush);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
/* do nothing if rf-kill is on */
@@ -1405,7 +1405,7 @@
if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
IWL_ERR(priv, "Start IWL Error Log Dump:\n");
IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
- priv->status, table.valid);
+ priv->shrd->status, table.valid);
}
priv->isr_stats.err_code = table.error_id;
@@ -1765,7 +1765,7 @@
IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
/* After the ALIVE response, we can send host commands to the uCode */
- set_bit(STATUS_ALIVE, &priv->status);
+ set_bit(STATUS_ALIVE, &priv->shrd->status);
/* Enable watchdog to monitor the driver tx queues */
iwl_setup_watchdog(priv);
@@ -1838,7 +1838,7 @@
iwl_reset_run_time_calib(priv);
}
- set_bit(STATUS_READY, &priv->status);
+ set_bit(STATUS_READY, &priv->shrd->status);
/* Configure the adapter for unassociated operation */
ret = iwlagn_commit_rxon(priv, ctx);
@@ -1870,7 +1870,8 @@
*/
ieee80211_remain_on_channel_expired(priv->hw);
- exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
+ exit_pending =
+ test_and_set_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
/* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
* to prevent rearm timer */
@@ -1895,19 +1896,20 @@
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
if (!exit_pending)
- clear_bit(STATUS_EXIT_PENDING, &priv->status);
+ clear_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
/* Clear out all status bits but a few that are stable across reset */
- priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
+ priv->shrd->status &=
+ test_bit(STATUS_RF_KILL_HW, &priv->shrd->status) <<
STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+ test_bit(STATUS_GEO_CONFIGURED, &priv->shrd->status) <<
STATUS_GEO_CONFIGURED |
- test_bit(STATUS_FW_ERROR, &priv->status) <<
+ test_bit(STATUS_FW_ERROR, &priv->shrd->status) <<
STATUS_FW_ERROR |
- test_bit(STATUS_EXIT_PENDING, &priv->status) <<
+ test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) <<
STATUS_EXIT_PENDING;
trans_stop_device(&priv->trans);
@@ -1934,7 +1936,7 @@
lockdep_assert_held(&priv->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) {
IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
return -EIO;
}
@@ -1967,9 +1969,9 @@
return 0;
error:
- set_bit(STATUS_EXIT_PENDING, &priv->status);
+ set_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
__iwl_down(priv);
- clear_bit(STATUS_EXIT_PENDING, &priv->status);
+ clear_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
IWL_ERR(priv, "Unable to initialize device.\n");
return ret;
@@ -1989,8 +1991,8 @@
mutex_lock(&priv->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status)) {
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) ||
+ test_bit(STATUS_SCANNING, &priv->shrd->status)) {
mutex_unlock(&priv->mutex);
return;
}
@@ -2046,10 +2048,10 @@
{
struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
- if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
+ if (test_and_clear_bit(STATUS_FW_ERROR, &priv->shrd->status)) {
mutex_lock(&priv->mutex);
iwlagn_prepare_restart(priv);
mutex_unlock(&priv->mutex);
@@ -2263,7 +2265,7 @@
IWL_DEBUG_INFO(priv, "Start UP work done.\n");
/* Now we should be done, and the READY bit should be set. */
- if (WARN_ON(!test_bit(STATUS_READY, &priv->status)))
+ if (WARN_ON(!test_bit(STATUS_READY, &priv->shrd->status)))
ret = -EIO;
iwlagn_led_enable(priv);
@@ -2905,7 +2907,7 @@
case IEEE80211_AMPDU_RX_STOP:
IWL_DEBUG_HT(priv, "stop Rx\n");
ret = iwl_sta_rx_agg_stop(priv, sta, tid);
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
ret = 0;
break;
case IEEE80211_AMPDU_TX_START:
@@ -2925,7 +2927,7 @@
IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
priv->agg_tids_count);
}
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
ret = 0;
if (priv->cfg->ht_params &&
priv->cfg->ht_params->use_rts_for_aggregation) {
@@ -3060,9 +3062,9 @@
if (iwl_is_rfkill(priv))
goto out;
- if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status) ||
- test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) ||
+ test_bit(STATUS_SCANNING, &priv->shrd->status) ||
+ test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status))
goto out;
if (!iwl_is_associated_ctx(ctx))
@@ -3118,10 +3120,10 @@
* at this point, staging_rxon has the
* configuration for channel switch
*/
- set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+ set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status);
priv->switch_channel = cpu_to_le16(ch);
if (priv->cfg->lib->set_channel_switch(priv, ch_switch)) {
- clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+ clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status);
priv->switch_channel = 0;
ieee80211_chswitch_done(ctx->vif, false);
}
@@ -3188,7 +3190,7 @@
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "enter\n");
- if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+ if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) {
IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n");
goto done;
}
@@ -3273,7 +3275,7 @@
if (iwl_is_associated(priv, IWL_RXON_CTX_BSS) && duration > 80)
duration = 80;
- if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+ if (test_bit(STATUS_SCAN_HW, &priv->shrd->status)) {
err = -EBUSY;
goto out;
}
@@ -3727,12 +3729,12 @@
/* If platform's RF_KILL switch is NOT set to KILL */
if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
+ clear_bit(STATUS_RF_KILL_HW, &priv->shrd->status);
else
- set_bit(STATUS_RF_KILL_HW, &priv->status);
+ set_bit(STATUS_RF_KILL_HW, &priv->shrd->status);
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &priv->status));
+ test_bit(STATUS_RF_KILL_HW, &priv->shrd->status));
iwl_power_initialize(priv);
iwl_tt_initialize(priv);
@@ -3776,7 +3778,7 @@
* to be called and iwl_down since we are removing the device
* we need to set STATUS_EXIT_PENDING bit.
*/
- set_bit(STATUS_EXIT_PENDING, &priv->status);
+ set_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
iwl_testmode_cleanup(priv);
iwl_leds_exit(priv);