drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c
There's not really any value in stating that no locking is needed. And
even if the comment is useful, a check for the right mutex at the
beginning of the function is better since that can't be ingored as
easily as a bit of documentation.
Note that drm_mode_probed_add in drm_crtc.c is also changed, the next
patch will move this into drm_modes.c
v2: Don't add locking WARN_ONs where it is not strictly required (i.e.
the two functions to validate/prune mode lists).
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index ea620f4..353ff63 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -730,6 +730,8 @@
void drm_mode_probed_add(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex));
+
list_add_tail(&mode->head, &connector->probed_modes);
}
EXPORT_SYMBOL(drm_mode_probed_add);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 4892194..be86fed 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -42,9 +42,6 @@
* drm_mode_debug_printmodeline - print a mode to dmesg
* @mode: mode to print
*
- * LOCKING:
- * none.
- *
* Describe @mode using DRM_DEBUG.
*/
void drm_mode_debug_printmodeline(const struct drm_display_mode *mode)
@@ -69,9 +66,6 @@
* @interlaced:Whether the interlace is supported
* @margins: whether to add margins or not
*
- * LOCKING:
- * none.
- *
* return the modeline based on CVT algorithm
*
* This function is called to generate the modeline based on CVT algorithm
@@ -294,9 +288,6 @@
* @GTF_K: extended GTF formula parameters
* @GTF_2J: extended GTF formula parameters
*
- * LOCKING.
- * none.
- *
* return the modeline based on full GTF algorithm.
*
* GTF feature blocks specify C and J in multiples of 0.5, so we pass them
@@ -479,9 +470,6 @@
* @interlaced :whether the interlace is supported
* @margins :whether the margin is supported
*
- * LOCKING.
- * none.
- *
* return the modeline based on GTF algorithm
*
* This function is to create the modeline based on the GTF algorithm.
@@ -584,9 +572,6 @@
* drm_mode_set_name - set the name on a mode
* @mode: name will be set in this mode
*
- * LOCKING:
- * None.
- *
* Set the name of @mode to a standard format.
*/
void drm_mode_set_name(struct drm_display_mode *mode)
@@ -603,9 +588,6 @@
* drm_mode_width - get the width of a mode
* @mode: mode
*
- * LOCKING:
- * None.
- *
* Return @mode's width (hdisplay) value.
*
* FIXME: is this needed?
@@ -624,9 +606,6 @@
* drm_mode_height - get the height of a mode
* @mode: mode
*
- * LOCKING:
- * None.
- *
* Return @mode's height (vdisplay) value.
*
* FIXME: is this needed?
@@ -643,9 +622,6 @@
/** drm_mode_hsync - get the hsync of a mode
* @mode: mode
*
- * LOCKING:
- * None.
- *
* Return @modes's hsync rate in kHz, rounded to the nearest int.
*/
int drm_mode_hsync(const struct drm_display_mode *mode)
@@ -670,9 +646,6 @@
* drm_mode_vrefresh - get the vrefresh of a mode
* @mode: mode
*
- * LOCKING:
- * None.
- *
* Return @mode's vrefresh rate in Hz or calculate it if necessary.
*
* FIXME: why is this needed? shouldn't vrefresh be set already?
@@ -713,9 +686,6 @@
* @p: mode
* @adjust_flags: a combination of adjustment flags
*
- * LOCKING:
- * None.
- *
* Setup the CRTC modesetting parameters for @p, adjusting if necessary.
*
* - The CRTC_INTERLACE_HALVE_V flag can be used to halve vertical timings of
@@ -790,9 +760,6 @@
* @dst: mode to overwrite
* @src: mode to copy
*
- * LOCKING:
- * None.
- *
* Copy an existing mode into another mode, preserving the object id and
* list head of the destination mode.
*/
@@ -812,9 +779,6 @@
* @dev: drm_device to allocate the duplicated mode for
* @mode: mode to duplicate
*
- * LOCKING:
- * None.
- *
* Just allocate a new mode, copy the existing mode into it, and return
* a pointer to it. Used to create new instances of established modes.
*/
@@ -838,9 +802,6 @@
* @mode1: first mode
* @mode2: second mode
*
- * LOCKING:
- * None.
- *
* Check to see if @mode1 and @mode2 are equivalent.
*
* RETURNS:
@@ -869,9 +830,6 @@
* @mode1: first mode
* @mode2: second mode
*
- * LOCKING:
- * None.
- *
* Check to see if @mode1 and @mode2 are equivalent, but
* don't check the pixel clocks nor the stereo layout.
*
@@ -907,9 +865,6 @@
* @maxY: maximum height
* @maxPitch: max pitch
*
- * LOCKING:
- * Caller must hold a lock protecting @mode_list.
- *
* The DRM device (@dev) has size and pitch limits. Here we validate the
* modes we probed for @dev against those limits and set their status as
* necessary.
@@ -939,9 +894,6 @@
* @mode_list: list of modes to check
* @verbose: be verbose about it
*
- * LOCKING:
- * Caller must hold a lock protecting @mode_list.
- *
* Once mode list generation is complete, a caller can use this routine to
* remove invalid modes from a mode list. If any of the modes have a
* status other than %MODE_OK, they are removed from @mode_list and freed.
@@ -971,9 +923,6 @@
* @lh_a: list_head for first mode
* @lh_b: list_head for second mode
*
- * LOCKING:
- * None.
- *
* Compare two modes, given by @lh_a and @lh_b, returning a value indicating
* which is better.
*
@@ -1007,9 +956,6 @@
* drm_mode_sort - sort mode list
* @mode_list: list to sort
*
- * LOCKING:
- * Caller must hold a lock protecting @mode_list.
- *
* Sort @mode_list by favorability, putting good modes first.
*/
void drm_mode_sort(struct list_head *mode_list)
@@ -1022,9 +968,6 @@
* drm_mode_connector_list_update - update the mode list for the connector
* @connector: the connector to update
*
- * LOCKING:
- * Caller must hold a lock protecting @mode_list.
- *
* This moves the modes from the @connector probed_modes list
* to the actual mode list. It compares the probed mode against the current
* list and only adds different modes. All modes unverified after this point
@@ -1036,6 +979,8 @@
struct drm_display_mode *pmode, *pt;
int found_it;
+ WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex));
+
list_for_each_entry_safe(pmode, pt, &connector->probed_modes,
head) {
found_it = 0;