blob: 922c4194c7bb909c493716d1d48a4bceb8b714f9 [file] [log] [blame]
config MICROBLAZE
def_bool y
select HAVE_MEMBLOCK
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
select USB_ARCH_HAS_EHCI
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select TRACING_SUPPORT
select OF
select OF_EARLY_FLATTREE
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select GENERIC_HARDIRQS_NO_DEPRECATED
config SWAP
def_bool n
config RWSEM_GENERIC_SPINLOCK
def_bool y
config RWSEM_XCHGADD_ALGORITHM
bool
config ARCH_HAS_ILOG2_U32
def_bool n
config ARCH_HAS_ILOG2_U64
def_bool n
config GENERIC_FIND_NEXT_BIT
def_bool y
config GENERIC_HWEIGHT
def_bool y
config GENERIC_CALIBRATE_DELAY
def_bool y
config GENERIC_TIME_VSYSCALL
def_bool n
config GENERIC_CLOCKEVENTS
def_bool y
config GENERIC_GPIO
def_bool y
config GENERIC_CSUM
def_bool y
config STACKTRACE_SUPPORT
def_bool y
config LOCKDEP_SUPPORT
def_bool y
config HAVE_LATENCYTOP_SUPPORT
def_bool y
source "init/Kconfig"
source "kernel/Kconfig.freezer"
source "arch/microblaze/platform/Kconfig.platform"
menu "Processor type and features"
source "kernel/time/Kconfig"
source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
config MMU
bool "MMU support"
default n
config NO_MMU
bool
depends on !MMU
default y
comment "Boot options"
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
config CMDLINE
string "Default kernel command string"
depends on CMDLINE_BOOL
default "console=ttyUL0,115200"
help
On some architectures there is currently no way for the boot loader
to pass arguments to the kernel. For these architectures, you should
supply some command-line options at build time by entering them
here.
config CMDLINE_FORCE
bool "Force default kernel command string"
depends on CMDLINE_BOOL
default n
help
Set this to have arguments from the default kernel command string
override those passed by the boot loader.
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
default y
help
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
execution. By using pipes or other transports made available to
the process as file descriptors supporting the read/write
syscalls, it's possible to isolate those applications in
their own address space using seccomp. Once seccomp is
enabled via /proc/<pid>/seccomp, it cannot be disabled
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
If unsure, say Y. Only embedded should say N here.
endmenu
menu "Advanced setup"
config ADVANCED_OPTIONS
bool "Prompt for advanced kernel configuration options"
help
This option will enable prompting for a variety of advanced kernel
configuration options. These options can cause the kernel to not
work if they are set incorrectly, but can be used to optimize certain
aspects of kernel memory management.
Unless you know what you are doing, say N here.
comment "Default settings for advanced configuration options are used"
depends on !ADVANCED_OPTIONS
config XILINX_UNCACHED_SHADOW
bool "Are you using uncached shadow for RAM ?"
depends on ADVANCED_OPTIONS && !MMU
default n
help
This is needed to be able to allocate uncachable memory regions.
The feature requires the design to define the RAM memory controller
window to be twice as large as the actual physical memory.
config HIGHMEM_START_BOOL
bool "Set high memory pool address"
depends on ADVANCED_OPTIONS && HIGHMEM
help
This option allows you to set the base address of the kernel virtual
area used to map high memory pages. This can be useful in
optimizing the layout of kernel virtual memory.
Say N here unless you know what you are doing.
config HIGHMEM_START
hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
depends on MMU
default "0xfe000000"
config LOWMEM_SIZE_BOOL
bool "Set maximum low memory"
depends on ADVANCED_OPTIONS && MMU
help
This option allows you to set the maximum amount of memory which
will be used as "low memory", that is, memory which the kernel can
access directly, without having to set up a kernel virtual mapping.
This can be useful in optimizing the layout of kernel virtual
memory.
Say N here unless you know what you are doing.
config LOWMEM_SIZE
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
default "0x30000000"
config MANUAL_RESET_VECTOR
hex "Microblaze reset vector address setup"
default "0x0"
help
Set this option to have the kernel override the CPU Reset vector.
If zero, no change will be made to the MicroBlaze reset vector at
address 0x0.
If non-zero, a jump instruction to this address, will be written
to the reset vector at address 0x0.
If you are unsure, set it to default value 0x0.
config KERNEL_START_BOOL
bool "Set custom kernel base address"
depends on ADVANCED_OPTIONS
help
This option allows you to set the kernel virtual address at which
the kernel will map low memory (the kernel image will be linked at
this address). This can be useful in optimizing the virtual memory
layout of the system.
Say N here unless you know what you are doing.
config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL
default "0xc0000000" if MMU
default KERNEL_BASE_ADDR if !MMU
config TASK_SIZE_BOOL
bool "Set custom user task size"
depends on ADVANCED_OPTIONS && MMU
help
This option allows you to set the amount of virtual address space
allocated to user tasks. This can be useful in optimizing the
virtual memory layout of the system.
Say N here unless you know what you are doing.
config TASK_SIZE
hex "Size of user task space" if TASK_SIZE_BOOL
default "0x80000000"
choice
prompt "Page size"
default MICROBLAZE_4K_PAGES
depends on ADVANCED_OPTIONS && !MMU
help
Select the kernel logical page size. Increasing the page size
will reduce software overhead at each page boundary, allow
hardware prefetch mechanisms to be more effective, and allow
larger dma transfers increasing IO efficiency and reducing
overhead. However the utilization of memory will increase.
For example, each cached file will using a multiple of the
page size to hold its contents and the difference between the
end of file and the end of page is wasted.
If unsure, choose 4K_PAGES.
config MICROBLAZE_4K_PAGES
bool "4k page size"
config MICROBLAZE_8K_PAGES
bool "8k page size"
config MICROBLAZE_16K_PAGES
bool "16k page size"
config MICROBLAZE_32K_PAGES
bool "32k page size"
endchoice
endmenu
source "mm/Kconfig"
menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu
menu "Bus Options"
config PCI
bool "PCI support"
config PCI_DOMAINS
def_bool PCI
config PCI_SYSCALL
def_bool PCI
config PCI_XILINX
bool "Xilinx PCI host bridge support"
depends on PCI
source "drivers/pci/Kconfig"
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "arch/microblaze/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"