| /* |
| * TI OMAP Real Time Clock interface for Linux |
| * |
| * Copyright (C) 2003 MontaVista Software, Inc. |
| * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com> |
| * |
| * Copyright (C) 2006 David Brownell (new RTC framework) |
| * Copyright (C) 2014 Johan Hovold <johan@kernel.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/rtc.h> |
| #include <linux/bcd.h> |
| #include <linux/platform_device.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/io.h> |
| |
| /* |
| * The OMAP RTC is a year/month/day/hours/minutes/seconds BCD clock |
| * with century-range alarm matching, driven by the 32kHz clock. |
| * |
| * The main user-visible ways it differs from PC RTCs are by omitting |
| * "don't care" alarm fields and sub-second periodic IRQs, and having |
| * an autoadjust mechanism to calibrate to the true oscillator rate. |
| * |
| * Board-specific wiring options include using split power mode with |
| * RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset), |
| * and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from |
| * low power modes) for OMAP1 boards (OMAP-L138 has this built into |
| * the SoC). See the BOARD-SPECIFIC CUSTOMIZATION comment. |
| */ |
| |
| /* RTC registers */ |
| #define OMAP_RTC_SECONDS_REG 0x00 |
| #define OMAP_RTC_MINUTES_REG 0x04 |
| #define OMAP_RTC_HOURS_REG 0x08 |
| #define OMAP_RTC_DAYS_REG 0x0C |
| #define OMAP_RTC_MONTHS_REG 0x10 |
| #define OMAP_RTC_YEARS_REG 0x14 |
| #define OMAP_RTC_WEEKS_REG 0x18 |
| |
| #define OMAP_RTC_ALARM_SECONDS_REG 0x20 |
| #define OMAP_RTC_ALARM_MINUTES_REG 0x24 |
| #define OMAP_RTC_ALARM_HOURS_REG 0x28 |
| #define OMAP_RTC_ALARM_DAYS_REG 0x2c |
| #define OMAP_RTC_ALARM_MONTHS_REG 0x30 |
| #define OMAP_RTC_ALARM_YEARS_REG 0x34 |
| |
| #define OMAP_RTC_CTRL_REG 0x40 |
| #define OMAP_RTC_STATUS_REG 0x44 |
| #define OMAP_RTC_INTERRUPTS_REG 0x48 |
| |
| #define OMAP_RTC_COMP_LSB_REG 0x4c |
| #define OMAP_RTC_COMP_MSB_REG 0x50 |
| #define OMAP_RTC_OSC_REG 0x54 |
| |
| #define OMAP_RTC_KICK0_REG 0x6c |
| #define OMAP_RTC_KICK1_REG 0x70 |
| |
| #define OMAP_RTC_IRQWAKEEN 0x7c |
| |
| #define OMAP_RTC_ALARM2_SECONDS_REG 0x80 |
| #define OMAP_RTC_ALARM2_MINUTES_REG 0x84 |
| #define OMAP_RTC_ALARM2_HOURS_REG 0x88 |
| #define OMAP_RTC_ALARM2_DAYS_REG 0x8c |
| #define OMAP_RTC_ALARM2_MONTHS_REG 0x90 |
| #define OMAP_RTC_ALARM2_YEARS_REG 0x94 |
| |
| #define OMAP_RTC_PMIC_REG 0x98 |
| |
| /* OMAP_RTC_CTRL_REG bit fields: */ |
| #define OMAP_RTC_CTRL_SPLIT BIT(7) |
| #define OMAP_RTC_CTRL_DISABLE BIT(6) |
| #define OMAP_RTC_CTRL_SET_32_COUNTER BIT(5) |
| #define OMAP_RTC_CTRL_TEST BIT(4) |
| #define OMAP_RTC_CTRL_MODE_12_24 BIT(3) |
| #define OMAP_RTC_CTRL_AUTO_COMP BIT(2) |
| #define OMAP_RTC_CTRL_ROUND_30S BIT(1) |
| #define OMAP_RTC_CTRL_STOP BIT(0) |
| |
| /* OMAP_RTC_STATUS_REG bit fields: */ |
| #define OMAP_RTC_STATUS_POWER_UP BIT(7) |
| #define OMAP_RTC_STATUS_ALARM2 BIT(7) |
| #define OMAP_RTC_STATUS_ALARM BIT(6) |
| #define OMAP_RTC_STATUS_1D_EVENT BIT(5) |
| #define OMAP_RTC_STATUS_1H_EVENT BIT(4) |
| #define OMAP_RTC_STATUS_1M_EVENT BIT(3) |
| #define OMAP_RTC_STATUS_1S_EVENT BIT(2) |
| #define OMAP_RTC_STATUS_RUN BIT(1) |
| #define OMAP_RTC_STATUS_BUSY BIT(0) |
| |
| /* OMAP_RTC_INTERRUPTS_REG bit fields: */ |
| #define OMAP_RTC_INTERRUPTS_IT_ALARM2 BIT(4) |
| #define OMAP_RTC_INTERRUPTS_IT_ALARM BIT(3) |
| #define OMAP_RTC_INTERRUPTS_IT_TIMER BIT(2) |
| |
| /* OMAP_RTC_OSC_REG bit fields: */ |
| #define OMAP_RTC_OSC_32KCLK_EN BIT(6) |
| |
| /* OMAP_RTC_IRQWAKEEN bit fields: */ |
| #define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1) |
| |
| /* OMAP_RTC_PMIC bit fields: */ |
| #define OMAP_RTC_PMIC_POWER_EN_EN BIT(16) |
| |
| /* OMAP_RTC_KICKER values */ |
| #define KICK0_VALUE 0x83e70b13 |
| #define KICK1_VALUE 0x95a4f1e0 |
| |
| struct omap_rtc; |
| |
| struct omap_rtc_device_type { |
| bool has_32kclk_en; |
| bool has_irqwakeen; |
| bool has_pmic_mode; |
| bool has_power_up_reset; |
| void (*lock)(struct omap_rtc *rtc); |
| void (*unlock)(struct omap_rtc *rtc); |
| }; |
| |
| struct omap_rtc { |
| struct rtc_device *rtc; |
| void __iomem *base; |
| int irq_alarm; |
| int irq_timer; |
| u8 interrupts_reg; |
| bool is_pmic_controller; |
| const struct omap_rtc_device_type *type; |
| }; |
| |
| static inline u8 rtc_read(struct omap_rtc *rtc, unsigned int reg) |
| { |
| return readb(rtc->base + reg); |
| } |
| |
| static inline u32 rtc_readl(struct omap_rtc *rtc, unsigned int reg) |
| { |
| return readl(rtc->base + reg); |
| } |
| |
| static inline void rtc_write(struct omap_rtc *rtc, unsigned int reg, u8 val) |
| { |
| writeb(val, rtc->base + reg); |
| } |
| |
| static inline void rtc_writel(struct omap_rtc *rtc, unsigned int reg, u32 val) |
| { |
| writel(val, rtc->base + reg); |
| } |
| |
| static void am3352_rtc_unlock(struct omap_rtc *rtc) |
| { |
| rtc_writel(rtc, OMAP_RTC_KICK0_REG, KICK0_VALUE); |
| rtc_writel(rtc, OMAP_RTC_KICK1_REG, KICK1_VALUE); |
| } |
| |
| static void am3352_rtc_lock(struct omap_rtc *rtc) |
| { |
| rtc_writel(rtc, OMAP_RTC_KICK0_REG, 0); |
| rtc_writel(rtc, OMAP_RTC_KICK1_REG, 0); |
| } |
| |
| static void default_rtc_unlock(struct omap_rtc *rtc) |
| { |
| } |
| |
| static void default_rtc_lock(struct omap_rtc *rtc) |
| { |
| } |
| |
| /* |
| * We rely on the rtc framework to handle locking (rtc->ops_lock), |
| * so the only other requirement is that register accesses which |
| * require BUSY to be clear are made with IRQs locally disabled |
| */ |
| static void rtc_wait_not_busy(struct omap_rtc *rtc) |
| { |
| int count; |
| u8 status; |
| |
| /* BUSY may stay active for 1/32768 second (~30 usec) */ |
| for (count = 0; count < 50; count++) { |
| status = rtc_read(rtc, OMAP_RTC_STATUS_REG); |
| if (!(status & OMAP_RTC_STATUS_BUSY)) |
| break; |
| udelay(1); |
| } |
| /* now we have ~15 usec to read/write various registers */ |
| } |
| |
| static irqreturn_t rtc_irq(int irq, void *dev_id) |
| { |
| struct omap_rtc *rtc = dev_id; |
| unsigned long events = 0; |
| u8 irq_data; |
| |
| irq_data = rtc_read(rtc, OMAP_RTC_STATUS_REG); |
| |
| /* alarm irq? */ |
| if (irq_data & OMAP_RTC_STATUS_ALARM) { |
| rtc->type->unlock(rtc); |
| rtc_write(rtc, OMAP_RTC_STATUS_REG, OMAP_RTC_STATUS_ALARM); |
| rtc->type->lock(rtc); |
| events |= RTC_IRQF | RTC_AF; |
| } |
| |
| /* 1/sec periodic/update irq? */ |
| if (irq_data & OMAP_RTC_STATUS_1S_EVENT) |
| events |= RTC_IRQF | RTC_UF; |
| |
| rtc_update_irq(rtc->rtc, 1, events); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| struct omap_rtc *rtc = dev_get_drvdata(dev); |
| u8 reg, irqwake_reg = 0; |
| |
| local_irq_disable(); |
| rtc_wait_not_busy(rtc); |
| reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG); |
| if (rtc->type->has_irqwakeen) |
| irqwake_reg = rtc_read(rtc, OMAP_RTC_IRQWAKEEN); |
| |
| if (enabled) { |
| reg |= OMAP_RTC_INTERRUPTS_IT_ALARM; |
| irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN; |
| } else { |
| reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM; |
| irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN; |
| } |
| rtc_wait_not_busy(rtc); |
| rtc->type->unlock(rtc); |
| rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, reg); |
| if (rtc->type->has_irqwakeen) |
| rtc_write(rtc, OMAP_RTC_IRQWAKEEN, irqwake_reg); |
| rtc->type->lock(rtc); |
| local_irq_enable(); |
| |
| return 0; |
| } |
| |
| /* this hardware doesn't support "don't care" alarm fields */ |
| static int tm2bcd(struct rtc_time *tm) |
| { |
| if (rtc_valid_tm(tm) != 0) |
| return -EINVAL; |
| |
| tm->tm_sec = bin2bcd(tm->tm_sec); |
| tm->tm_min = bin2bcd(tm->tm_min); |
| tm->tm_hour = bin2bcd(tm->tm_hour); |
| tm->tm_mday = bin2bcd(tm->tm_mday); |
| |
| tm->tm_mon = bin2bcd(tm->tm_mon + 1); |
| |
| /* epoch == 1900 */ |
| if (tm->tm_year < 100 || tm->tm_year > 199) |
| return -EINVAL; |
| tm->tm_year = bin2bcd(tm->tm_year - 100); |
| |
| return 0; |
| } |
| |
| static void bcd2tm(struct rtc_time *tm) |
| { |
| tm->tm_sec = bcd2bin(tm->tm_sec); |
| tm->tm_min = bcd2bin(tm->tm_min); |
| tm->tm_hour = bcd2bin(tm->tm_hour); |
| tm->tm_mday = bcd2bin(tm->tm_mday); |
| tm->tm_mon = bcd2bin(tm->tm_mon) - 1; |
| /* epoch == 1900 */ |
| tm->tm_year = bcd2bin(tm->tm_year) + 100; |
| } |
| |
| static void omap_rtc_read_time_raw(struct omap_rtc *rtc, struct rtc_time *tm) |
| { |
| tm->tm_sec = rtc_read(rtc, OMAP_RTC_SECONDS_REG); |
| tm->tm_min = rtc_read(rtc, OMAP_RTC_MINUTES_REG); |
| tm->tm_hour = rtc_read(rtc, OMAP_RTC_HOURS_REG); |
| tm->tm_mday = rtc_read(rtc, OMAP_RTC_DAYS_REG); |
| tm->tm_mon = rtc_read(rtc, OMAP_RTC_MONTHS_REG); |
| tm->tm_year = rtc_read(rtc, OMAP_RTC_YEARS_REG); |
| } |
| |
| static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct omap_rtc *rtc = dev_get_drvdata(dev); |
| |
| /* we don't report wday/yday/isdst ... */ |
| local_irq_disable(); |
| rtc_wait_not_busy(rtc); |
| omap_rtc_read_time_raw(rtc, tm); |
| local_irq_enable(); |
| |
| bcd2tm(tm); |
| |
| return 0; |
| } |
| |
| static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct omap_rtc *rtc = dev_get_drvdata(dev); |
| |
| if (tm2bcd(tm) < 0) |
| return -EINVAL; |
| |
| local_irq_disable(); |
| rtc_wait_not_busy(rtc); |
| |
| rtc->type->unlock(rtc); |
| rtc_write(rtc, OMAP_RTC_YEARS_REG, tm->tm_year); |
| rtc_write(rtc, OMAP_RTC_MONTHS_REG, tm->tm_mon); |
| rtc_write(rtc, OMAP_RTC_DAYS_REG, tm->tm_mday); |
| rtc_write(rtc, OMAP_RTC_HOURS_REG, tm->tm_hour); |
| rtc_write(rtc, OMAP_RTC_MINUTES_REG, tm->tm_min); |
| rtc_write(rtc, OMAP_RTC_SECONDS_REG, tm->tm_sec); |
| rtc->type->lock(rtc); |
| |
| local_irq_enable(); |
| |
| return 0; |
| } |
| |
| static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| { |
| struct omap_rtc *rtc = dev_get_drvdata(dev); |
| u8 interrupts; |
| |
| local_irq_disable(); |
| rtc_wait_not_busy(rtc); |
| |
| alm->time.tm_sec = rtc_read(rtc, OMAP_RTC_ALARM_SECONDS_REG); |
| alm->time.tm_min = rtc_read(rtc, OMAP_RTC_ALARM_MINUTES_REG); |
| alm->time.tm_hour = rtc_read(rtc, OMAP_RTC_ALARM_HOURS_REG); |
| alm->time.tm_mday = rtc_read(rtc, OMAP_RTC_ALARM_DAYS_REG); |
| alm->time.tm_mon = rtc_read(rtc, OMAP_RTC_ALARM_MONTHS_REG); |
| alm->time.tm_year = rtc_read(rtc, OMAP_RTC_ALARM_YEARS_REG); |
| |
| local_irq_enable(); |
| |
| bcd2tm(&alm->time); |
| |
| interrupts = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG); |
| alm->enabled = !!(interrupts & OMAP_RTC_INTERRUPTS_IT_ALARM); |
| |
| return 0; |
| } |
| |
| static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| { |
| struct omap_rtc *rtc = dev_get_drvdata(dev); |
| u8 reg, irqwake_reg = 0; |
| |
| if (tm2bcd(&alm->time) < 0) |
| return -EINVAL; |
| |
| local_irq_disable(); |
| rtc_wait_not_busy(rtc); |
| |
| rtc->type->unlock(rtc); |
| rtc_write(rtc, OMAP_RTC_ALARM_YEARS_REG, alm->time.tm_year); |
| rtc_write(rtc, OMAP_RTC_ALARM_MONTHS_REG, alm->time.tm_mon); |
| rtc_write(rtc, OMAP_RTC_ALARM_DAYS_REG, alm->time.tm_mday); |
| rtc_write(rtc, OMAP_RTC_ALARM_HOURS_REG, alm->time.tm_hour); |
| rtc_write(rtc, OMAP_RTC_ALARM_MINUTES_REG, alm->time.tm_min); |
| rtc_write(rtc, OMAP_RTC_ALARM_SECONDS_REG, alm->time.tm_sec); |
| |
| reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG); |
| if (rtc->type->has_irqwakeen) |
| irqwake_reg = rtc_read(rtc, OMAP_RTC_IRQWAKEEN); |
| |
| if (alm->enabled) { |
| reg |= OMAP_RTC_INTERRUPTS_IT_ALARM; |
| irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN; |
| } else { |
| reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM; |
| irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN; |
| } |
| rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, reg); |
| if (rtc->type->has_irqwakeen) |
| rtc_write(rtc, OMAP_RTC_IRQWAKEEN, irqwake_reg); |
| rtc->type->lock(rtc); |
| |
| local_irq_enable(); |
| |
| return 0; |
| } |
| |
| static struct omap_rtc *omap_rtc_power_off_rtc; |
| |
| /* |
| * omap_rtc_poweroff: RTC-controlled power off |
| * |
| * The RTC can be used to control an external PMIC via the pmic_power_en pin, |
| * which can be configured to transition to OFF on ALARM2 events. |
| * |
| * Notes: |
| * The two-second alarm offset is the shortest offset possible as the alarm |
| * registers must be set before the next timer update and the offset |
| * calculation is too heavy for everything to be done within a single access |
| * period (~15 us). |
| * |
| * Called with local interrupts disabled. |
| */ |
| static void omap_rtc_power_off(void) |
| { |
| struct omap_rtc *rtc = omap_rtc_power_off_rtc; |
| struct rtc_time tm; |
| unsigned long now; |
| u32 val; |
| |
| rtc->type->unlock(rtc); |
| /* enable pmic_power_en control */ |
| val = rtc_readl(rtc, OMAP_RTC_PMIC_REG); |
| rtc_writel(rtc, OMAP_RTC_PMIC_REG, val | OMAP_RTC_PMIC_POWER_EN_EN); |
| |
| /* set alarm two seconds from now */ |
| omap_rtc_read_time_raw(rtc, &tm); |
| bcd2tm(&tm); |
| rtc_tm_to_time(&tm, &now); |
| rtc_time_to_tm(now + 2, &tm); |
| |
| if (tm2bcd(&tm) < 0) { |
| dev_err(&rtc->rtc->dev, "power off failed\n"); |
| return; |
| } |
| |
| rtc_wait_not_busy(rtc); |
| |
| rtc_write(rtc, OMAP_RTC_ALARM2_SECONDS_REG, tm.tm_sec); |
| rtc_write(rtc, OMAP_RTC_ALARM2_MINUTES_REG, tm.tm_min); |
| rtc_write(rtc, OMAP_RTC_ALARM2_HOURS_REG, tm.tm_hour); |
| rtc_write(rtc, OMAP_RTC_ALARM2_DAYS_REG, tm.tm_mday); |
| rtc_write(rtc, OMAP_RTC_ALARM2_MONTHS_REG, tm.tm_mon); |
| rtc_write(rtc, OMAP_RTC_ALARM2_YEARS_REG, tm.tm_year); |
| |
| /* |
| * enable ALARM2 interrupt |
| * |
| * NOTE: this fails on AM3352 if rtc_write (writeb) is used |
| */ |
| val = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG); |
| rtc_writel(rtc, OMAP_RTC_INTERRUPTS_REG, |
| val | OMAP_RTC_INTERRUPTS_IT_ALARM2); |
| rtc->type->lock(rtc); |
| |
| /* |
| * Wait for alarm to trigger (within two seconds) and external PMIC to |
| * power off the system. Add a 500 ms margin for external latencies |
| * (e.g. debounce circuits). |
| */ |
| mdelay(2500); |
| } |
| |
| static struct rtc_class_ops omap_rtc_ops = { |
| .read_time = omap_rtc_read_time, |
| .set_time = omap_rtc_set_time, |
| .read_alarm = omap_rtc_read_alarm, |
| .set_alarm = omap_rtc_set_alarm, |
| .alarm_irq_enable = omap_rtc_alarm_irq_enable, |
| }; |
| |
| static const struct omap_rtc_device_type omap_rtc_default_type = { |
| .has_power_up_reset = true, |
| .lock = default_rtc_lock, |
| .unlock = default_rtc_unlock, |
| }; |
| |
| static const struct omap_rtc_device_type omap_rtc_am3352_type = { |
| .has_32kclk_en = true, |
| .has_irqwakeen = true, |
| .has_pmic_mode = true, |
| .lock = am3352_rtc_lock, |
| .unlock = am3352_rtc_unlock, |
| }; |
| |
| static const struct omap_rtc_device_type omap_rtc_da830_type = { |
| .lock = am3352_rtc_lock, |
| .unlock = am3352_rtc_unlock, |
| }; |
| |
| static const struct platform_device_id omap_rtc_id_table[] = { |
| { |
| .name = "omap_rtc", |
| .driver_data = (kernel_ulong_t)&omap_rtc_default_type, |
| }, { |
| .name = "am3352-rtc", |
| .driver_data = (kernel_ulong_t)&omap_rtc_am3352_type, |
| }, { |
| .name = "da830-rtc", |
| .driver_data = (kernel_ulong_t)&omap_rtc_da830_type, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(platform, omap_rtc_id_table); |
| |
| static const struct of_device_id omap_rtc_of_match[] = { |
| { |
| .compatible = "ti,am3352-rtc", |
| .data = &omap_rtc_am3352_type, |
| }, { |
| .compatible = "ti,da830-rtc", |
| .data = &omap_rtc_da830_type, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(of, omap_rtc_of_match); |
| |
| static int omap_rtc_probe(struct platform_device *pdev) |
| { |
| struct omap_rtc *rtc; |
| struct resource *res; |
| u8 reg, mask, new_ctrl; |
| const struct platform_device_id *id_entry; |
| const struct of_device_id *of_id; |
| int ret; |
| |
| rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL); |
| if (!rtc) |
| return -ENOMEM; |
| |
| of_id = of_match_device(omap_rtc_of_match, &pdev->dev); |
| if (of_id) { |
| rtc->type = of_id->data; |
| rtc->is_pmic_controller = rtc->type->has_pmic_mode && |
| of_property_read_bool(pdev->dev.of_node, |
| "system-power-controller"); |
| } else { |
| id_entry = platform_get_device_id(pdev); |
| rtc->type = (void *)id_entry->driver_data; |
| } |
| |
| rtc->irq_timer = platform_get_irq(pdev, 0); |
| if (rtc->irq_timer <= 0) |
| return -ENOENT; |
| |
| rtc->irq_alarm = platform_get_irq(pdev, 1); |
| if (rtc->irq_alarm <= 0) |
| return -ENOENT; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| rtc->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(rtc->base)) |
| return PTR_ERR(rtc->base); |
| |
| platform_set_drvdata(pdev, rtc); |
| |
| /* Enable the clock/module so that we can access the registers */ |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_get_sync(&pdev->dev); |
| |
| rtc->type->unlock(rtc); |
| |
| /* |
| * disable interrupts |
| * |
| * NOTE: ALARM2 is not cleared on AM3352 if rtc_write (writeb) is used |
| */ |
| rtc_writel(rtc, OMAP_RTC_INTERRUPTS_REG, 0); |
| |
| /* enable RTC functional clock */ |
| if (rtc->type->has_32kclk_en) { |
| reg = rtc_read(rtc, OMAP_RTC_OSC_REG); |
| rtc_writel(rtc, OMAP_RTC_OSC_REG, |
| reg | OMAP_RTC_OSC_32KCLK_EN); |
| } |
| |
| /* clear old status */ |
| reg = rtc_read(rtc, OMAP_RTC_STATUS_REG); |
| |
| mask = OMAP_RTC_STATUS_ALARM; |
| |
| if (rtc->type->has_pmic_mode) |
| mask |= OMAP_RTC_STATUS_ALARM2; |
| |
| if (rtc->type->has_power_up_reset) { |
| mask |= OMAP_RTC_STATUS_POWER_UP; |
| if (reg & OMAP_RTC_STATUS_POWER_UP) |
| dev_info(&pdev->dev, "RTC power up reset detected\n"); |
| } |
| |
| if (reg & mask) |
| rtc_write(rtc, OMAP_RTC_STATUS_REG, reg & mask); |
| |
| /* On boards with split power, RTC_ON_NOFF won't reset the RTC */ |
| reg = rtc_read(rtc, OMAP_RTC_CTRL_REG); |
| if (reg & OMAP_RTC_CTRL_STOP) |
| dev_info(&pdev->dev, "already running\n"); |
| |
| /* force to 24 hour mode */ |
| new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT | OMAP_RTC_CTRL_AUTO_COMP); |
| new_ctrl |= OMAP_RTC_CTRL_STOP; |
| |
| /* |
| * BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE: |
| * |
| * - Device wake-up capability setting should come through chip |
| * init logic. OMAP1 boards should initialize the "wakeup capable" |
| * flag in the platform device if the board is wired right for |
| * being woken up by RTC alarm. For OMAP-L138, this capability |
| * is built into the SoC by the "Deep Sleep" capability. |
| * |
| * - Boards wired so RTC_ON_nOFF is used as the reset signal, |
| * rather than nPWRON_RESET, should forcibly enable split |
| * power mode. (Some chip errata report that RTC_CTRL_SPLIT |
| * is write-only, and always reads as zero...) |
| */ |
| |
| if (new_ctrl & OMAP_RTC_CTRL_SPLIT) |
| dev_info(&pdev->dev, "split power mode\n"); |
| |
| if (reg != new_ctrl) |
| rtc_write(rtc, OMAP_RTC_CTRL_REG, new_ctrl); |
| |
| rtc->type->lock(rtc); |
| |
| device_init_wakeup(&pdev->dev, true); |
| |
| rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name, |
| &omap_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rtc->rtc)) { |
| ret = PTR_ERR(rtc->rtc); |
| goto err; |
| } |
| |
| /* handle periodic and alarm irqs */ |
| ret = devm_request_irq(&pdev->dev, rtc->irq_timer, rtc_irq, 0, |
| dev_name(&rtc->rtc->dev), rtc); |
| if (ret) |
| goto err; |
| |
| if (rtc->irq_timer != rtc->irq_alarm) { |
| ret = devm_request_irq(&pdev->dev, rtc->irq_alarm, rtc_irq, 0, |
| dev_name(&rtc->rtc->dev), rtc); |
| if (ret) |
| goto err; |
| } |
| |
| if (rtc->is_pmic_controller) { |
| if (!pm_power_off) { |
| omap_rtc_power_off_rtc = rtc; |
| pm_power_off = omap_rtc_power_off; |
| } |
| } |
| |
| return 0; |
| |
| err: |
| device_init_wakeup(&pdev->dev, false); |
| rtc->type->lock(rtc); |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| return ret; |
| } |
| |
| static int __exit omap_rtc_remove(struct platform_device *pdev) |
| { |
| struct omap_rtc *rtc = platform_get_drvdata(pdev); |
| |
| if (pm_power_off == omap_rtc_power_off && |
| omap_rtc_power_off_rtc == rtc) { |
| pm_power_off = NULL; |
| omap_rtc_power_off_rtc = NULL; |
| } |
| |
| device_init_wakeup(&pdev->dev, 0); |
| |
| rtc->type->unlock(rtc); |
| /* leave rtc running, but disable irqs */ |
| rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0); |
| |
| rtc->type->lock(rtc); |
| |
| /* Disable the clock/module */ |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int omap_rtc_suspend(struct device *dev) |
| { |
| struct omap_rtc *rtc = dev_get_drvdata(dev); |
| |
| rtc->interrupts_reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG); |
| |
| rtc->type->unlock(rtc); |
| /* |
| * FIXME: the RTC alarm is not currently acting as a wakeup event |
| * source on some platforms, and in fact this enable() call is just |
| * saving a flag that's never used... |
| */ |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(rtc->irq_alarm); |
| else |
| rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0); |
| rtc->type->lock(rtc); |
| |
| /* Disable the clock/module */ |
| pm_runtime_put_sync(dev); |
| |
| return 0; |
| } |
| |
| static int omap_rtc_resume(struct device *dev) |
| { |
| struct omap_rtc *rtc = dev_get_drvdata(dev); |
| |
| /* Enable the clock/module so that we can access the registers */ |
| pm_runtime_get_sync(dev); |
| |
| rtc->type->unlock(rtc); |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(rtc->irq_alarm); |
| else |
| rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, rtc->interrupts_reg); |
| rtc->type->lock(rtc); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(omap_rtc_pm_ops, omap_rtc_suspend, omap_rtc_resume); |
| |
| static void omap_rtc_shutdown(struct platform_device *pdev) |
| { |
| struct omap_rtc *rtc = platform_get_drvdata(pdev); |
| u8 mask; |
| |
| /* |
| * Keep the ALARM interrupt enabled to allow the system to power up on |
| * alarm events. |
| */ |
| rtc->type->unlock(rtc); |
| mask = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG); |
| mask &= OMAP_RTC_INTERRUPTS_IT_ALARM; |
| rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, mask); |
| rtc->type->lock(rtc); |
| } |
| |
| static struct platform_driver omap_rtc_driver = { |
| .probe = omap_rtc_probe, |
| .remove = __exit_p(omap_rtc_remove), |
| .shutdown = omap_rtc_shutdown, |
| .driver = { |
| .name = "omap_rtc", |
| .pm = &omap_rtc_pm_ops, |
| .of_match_table = omap_rtc_of_match, |
| }, |
| .id_table = omap_rtc_id_table, |
| }; |
| |
| module_platform_driver(omap_rtc_driver); |
| |
| MODULE_ALIAS("platform:omap_rtc"); |
| MODULE_AUTHOR("George G. Davis (and others)"); |
| MODULE_LICENSE("GPL"); |