| /* |
| * MEN 14F021P00 Board Management Controller (BMC) Watchdog Driver. |
| * |
| * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/watchdog.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| |
| #define DEVNAME "menf21bmc_wdt" |
| |
| #define BMC_CMD_WD_ON 0x11 |
| #define BMC_CMD_WD_OFF 0x12 |
| #define BMC_CMD_WD_TRIG 0x13 |
| #define BMC_CMD_WD_TIME 0x14 |
| #define BMC_CMD_WD_STATE 0x17 |
| #define BMC_WD_OFF_VAL 0x69 |
| #define BMC_CMD_RST_RSN 0x92 |
| |
| #define BMC_WD_TIMEOUT_MIN 1 /* in sec */ |
| #define BMC_WD_TIMEOUT_MAX 6553 /* in sec */ |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| struct menf21bmc_wdt { |
| struct watchdog_device wdt; |
| struct i2c_client *i2c_client; |
| }; |
| |
| static int menf21bmc_wdt_set_bootstatus(struct menf21bmc_wdt *data) |
| { |
| int rst_rsn; |
| |
| rst_rsn = i2c_smbus_read_byte_data(data->i2c_client, BMC_CMD_RST_RSN); |
| if (rst_rsn < 0) |
| return rst_rsn; |
| |
| if (rst_rsn == 0x02) |
| data->wdt.bootstatus |= WDIOF_CARDRESET; |
| else if (rst_rsn == 0x05) |
| data->wdt.bootstatus |= WDIOF_EXTERN1; |
| else if (rst_rsn == 0x06) |
| data->wdt.bootstatus |= WDIOF_EXTERN2; |
| else if (rst_rsn == 0x0A) |
| data->wdt.bootstatus |= WDIOF_POWERUNDER; |
| |
| return 0; |
| } |
| |
| static int menf21bmc_wdt_start(struct watchdog_device *wdt) |
| { |
| struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); |
| |
| return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_ON); |
| } |
| |
| static int menf21bmc_wdt_stop(struct watchdog_device *wdt) |
| { |
| struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); |
| |
| return i2c_smbus_write_byte_data(drv_data->i2c_client, |
| BMC_CMD_WD_OFF, BMC_WD_OFF_VAL); |
| } |
| |
| static int |
| menf21bmc_wdt_settimeout(struct watchdog_device *wdt, unsigned int timeout) |
| { |
| int ret; |
| struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); |
| |
| /* |
| * BMC Watchdog does have a resolution of 100ms. |
| * Watchdog API defines the timeout in seconds, so we have to |
| * multiply the value. |
| */ |
| ret = i2c_smbus_write_word_data(drv_data->i2c_client, |
| BMC_CMD_WD_TIME, timeout * 10); |
| if (ret < 0) |
| return ret; |
| |
| wdt->timeout = timeout; |
| |
| return 0; |
| } |
| |
| static int menf21bmc_wdt_ping(struct watchdog_device *wdt) |
| { |
| struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt); |
| |
| return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_TRIG); |
| } |
| |
| static const struct watchdog_info menf21bmc_wdt_info = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, |
| .identity = DEVNAME, |
| }; |
| |
| static const struct watchdog_ops menf21bmc_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = menf21bmc_wdt_start, |
| .stop = menf21bmc_wdt_stop, |
| .ping = menf21bmc_wdt_ping, |
| .set_timeout = menf21bmc_wdt_settimeout, |
| }; |
| |
| static int menf21bmc_wdt_probe(struct platform_device *pdev) |
| { |
| int ret, bmc_timeout; |
| struct menf21bmc_wdt *drv_data; |
| struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent); |
| |
| drv_data = devm_kzalloc(&pdev->dev, |
| sizeof(struct menf21bmc_wdt), GFP_KERNEL); |
| if (!drv_data) |
| return -ENOMEM; |
| |
| drv_data->wdt.ops = &menf21bmc_wdt_ops; |
| drv_data->wdt.info = &menf21bmc_wdt_info; |
| drv_data->wdt.min_timeout = BMC_WD_TIMEOUT_MIN; |
| drv_data->wdt.max_timeout = BMC_WD_TIMEOUT_MAX; |
| drv_data->i2c_client = i2c_client; |
| |
| /* |
| * Get the current wdt timeout value from the BMC because |
| * the BMC will save the value set before if the system restarts. |
| */ |
| bmc_timeout = i2c_smbus_read_word_data(drv_data->i2c_client, |
| BMC_CMD_WD_TIME); |
| if (bmc_timeout < 0) { |
| dev_err(&pdev->dev, "failed to get current WDT timeout\n"); |
| return bmc_timeout; |
| } |
| |
| watchdog_init_timeout(&drv_data->wdt, bmc_timeout / 10, &pdev->dev); |
| watchdog_set_nowayout(&drv_data->wdt, nowayout); |
| watchdog_set_drvdata(&drv_data->wdt, drv_data); |
| platform_set_drvdata(pdev, drv_data); |
| |
| ret = menf21bmc_wdt_set_bootstatus(drv_data); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to set Watchdog bootstatus\n"); |
| return ret; |
| } |
| |
| ret = watchdog_register_device(&drv_data->wdt); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register Watchdog device\n"); |
| return ret; |
| } |
| |
| dev_info(&pdev->dev, "MEN 14F021P00 BMC Watchdog device enabled\n"); |
| |
| return 0; |
| } |
| |
| static int menf21bmc_wdt_remove(struct platform_device *pdev) |
| { |
| struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev); |
| |
| dev_warn(&pdev->dev, |
| "Unregister MEN 14F021P00 BMC Watchdog device, board may reset\n"); |
| |
| watchdog_unregister_device(&drv_data->wdt); |
| |
| return 0; |
| } |
| |
| static void menf21bmc_wdt_shutdown(struct platform_device *pdev) |
| { |
| struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev); |
| |
| i2c_smbus_write_word_data(drv_data->i2c_client, |
| BMC_CMD_WD_OFF, BMC_WD_OFF_VAL); |
| } |
| |
| static struct platform_driver menf21bmc_wdt = { |
| .driver = { |
| .name = DEVNAME, |
| }, |
| .probe = menf21bmc_wdt_probe, |
| .remove = menf21bmc_wdt_remove, |
| .shutdown = menf21bmc_wdt_shutdown, |
| }; |
| |
| module_platform_driver(menf21bmc_wdt); |
| |
| MODULE_DESCRIPTION("MEN 14F021P00 BMC Watchdog driver"); |
| MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:menf21bmc_wdt"); |