Merge branch 'qcom/drivers' into next/drivers
* qcom/drivers:
tty: serial: Limit msm_serial_hs driver to platforms that use it
mmc: msm_sdcc: Limit driver to platforms that use it
usb: phy: msm: Move mach dependent code to platform data
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4024817..349610f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -106,7 +106,8 @@
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb
+ qcom-msm8960-cdp.dtb \
+ qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
new file mode 100644
index 0000000..13ac3e2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -0,0 +1,6 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+ model = "Qualcomm APQ8074 Dragonboard";
+ compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
new file mode 100644
index 0000000..6ac9496
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -0,0 +1,97 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm MSM8974";
+ compatible = "qcom,msm8974";
+ interrupt-parent = <&intc>;
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@f9000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xf9000000 0x1000>,
+ <0xf9002000 0x1000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 2 0xf08>,
+ <1 3 0xf08>,
+ <1 4 0xf08>,
+ <1 1 0xf08>;
+ clock-frequency = <19200000>;
+ };
+
+ timer@f9020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xf9020000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@f9021000 {
+ frame-number = <0>;
+ interrupts = <0 8 0x4>,
+ <0 7 0x4>;
+ reg = <0xf9021000 0x1000>,
+ <0xf9022000 0x1000>;
+ };
+
+ frame@f9023000 {
+ frame-number = <1>;
+ interrupts = <0 9 0x4>;
+ reg = <0xf9023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9024000 {
+ frame-number = <2>;
+ interrupts = <0 10 0x4>;
+ reg = <0xf9024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9025000 {
+ frame-number = <3>;
+ interrupts = <0 11 0x4>;
+ reg = <0xf9025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9026000 {
+ frame-number = <4>;
+ interrupts = <0 12 0x4>;
+ reg = <0xf9026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9027000 {
+ frame-number = <5>;
+ interrupts = <0 13 0x4>;
+ reg = <0xf9027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9028000 {
+ frame-number = <6>;
+ interrupts = <0 14 0x4>;
+ reg = <0xf9028000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
+ };
+};
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index 690b5f9..c5698b7 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -20,6 +20,7 @@
CONFIG_ARCH_MSM=y
CONFIG_ARCH_MSM8X60=y
CONFIG_ARCH_MSM8960=y
+CONFIG_ARCH_MSM8974=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
@@ -88,6 +89,8 @@
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_MSM=y
CONFIG_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 2586c28..702553b 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -44,6 +44,7 @@
config ARCH_MSM8X60
bool "MSM8X60"
+ select ARCH_MSM_DT
select ARM_GIC
select CPU_V7
select GPIO_MSM_V2
@@ -52,15 +53,25 @@
config ARCH_MSM8960
bool "MSM8960"
+ select ARCH_MSM_DT
select ARM_GIC
select CPU_V7
select HAVE_SMP
select GPIO_MSM_V2
select MSM_SCM if SMP
+config ARCH_MSM8974
+ bool "MSM8974"
+ select ARCH_MSM_DT
+ select ARM_GIC
+ select CPU_V7
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_SMP
+ select MSM_SCM if SMP
+ select USE_OF
+
config ARCH_MSM_DT
- def_bool y
- depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+ bool
select SPARSE_IRQ
select USE_OF
diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-msm/board-dt.c
index 16e6183..1f11d93 100644
--- a/arch/arm/mach-msm/board-dt.c
+++ b/arch/arm/mach-msm/board-dt.c
@@ -26,7 +26,16 @@
NULL
};
+static const char * const apq8074_dt_match[] __initconst = {
+ "qcom,apq8074-dragonboard",
+ NULL
+};
+
DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
.smp = smp_ops(msm_smp_ops),
.dt_compat = msm_dt_match,
MACHINE_END
+
+DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .dt_compat = apq8074_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index f9af5a4..46de789 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -30,6 +30,7 @@
#include <asm/memory.h>
#include <asm/setup.h>
+#include <mach/clk.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
@@ -60,10 +61,44 @@
-1
};
+static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
+{
+ int ret;
+
+ if (assert) {
+ ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+ if (ret)
+ pr_err("usb hs_clk assert failed\n");
+ } else {
+ ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb hs_clk deassert failed\n");
+ }
+ return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+ int ret;
+
+ ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+ if (ret) {
+ pr_err("usb phy clk assert failed\n");
+ return ret;
+ }
+ usleep_range(10000, 12000);
+ ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb phy clk deassert failed\n");
+ return ret;
+}
+
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
+ .link_clk_reset = hsusb_link_clk_reset,
+ .phy_clk_reset = hsusb_phy_clk_reset,
};
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 5f933bc..9169ec3 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -31,6 +31,7 @@
#include <mach/irqs.h>
#include <mach/sirc.h>
#include <mach/vreg.h>
+#include <mach/clk.h>
#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
@@ -81,10 +82,44 @@
-1
};
+static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
+{
+ int ret;
+
+ if (assert) {
+ ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+ if (ret)
+ pr_err("usb hs_clk assert failed\n");
+ } else {
+ ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb hs_clk deassert failed\n");
+ }
+ return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+ int ret;
+
+ ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+ if (ret) {
+ pr_err("usb phy clk assert failed\n");
+ return ret;
+ }
+ usleep_range(10000, 12000);
+ ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb phy clk deassert failed\n");
+ return ret;
+}
+
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
+ .link_clk_reset = hsusb_link_clk_reset,
+ .phy_clk_reset = hsusb_phy_clk_reset,
};
static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index ccf6621..015d544 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -13,6 +13,7 @@
* GNU General Public License for more details.
*
*/
+#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/kernel.h>
#include <linux/init.h>
@@ -68,12 +69,11 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
-#ifdef CONFIG_MMC
- rc = trout_init_mmc(system_rev);
- if (rc)
- printk(KERN_CRIT "%s: MMC init failure (%d)\n", __func__, rc);
-#endif
-
+ if (IS_ENABLED(CONFIG_MMC)) {
+ rc = trout_init_mmc(system_rev);
+ if (rc)
+ pr_crit("MMC init failure (%d)\n", rc);
+ }
}
static struct map_desc trout_io_desc[] __initdata = {
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 7fc5099..4e8ca9d 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -324,7 +324,7 @@
config MMC_MSM
tristate "Qualcomm SDCC Controller Support"
- depends on MMC && ARCH_MSM
+ depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
help
This provides support for the SD/MMC cell found in the
MSM and QSD SOCs from Qualcomm. The controller also has
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a3817ab..a53159c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1035,7 +1035,7 @@
config SERIAL_MSM_HS
tristate "MSM UART High Speed: Serial Driver"
- depends on ARCH_MSM
+ depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
select SERIAL_CORE
help
If you have a machine based on MSM family of SoCs, you
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index e9d4cd9..9a47d44 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -40,8 +40,6 @@
#include <linux/usb/msm_hsusb_hw.h>
#include <linux/regulator/consumer.h>
-#include <mach/clk.h>
-
#define MSM_USB_BASE (motg->regs)
#define DRIVER_NAME "msm_otg"
@@ -308,33 +306,30 @@
static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
{
- int ret;
+ int ret = 0;
- if (assert) {
- ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
- if (ret)
- dev_err(motg->phy.dev, "usb hs_clk assert failed\n");
- } else {
- ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
- if (ret)
- dev_err(motg->phy.dev, "usb hs_clk deassert failed\n");
- }
+ if (!motg->pdata->link_clk_reset)
+ return ret;
+
+ ret = motg->pdata->link_clk_reset(motg->clk, assert);
+ if (ret)
+ dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
+ assert ? "assert" : "deassert");
+
return ret;
}
static int msm_otg_phy_clk_reset(struct msm_otg *motg)
{
- int ret;
+ int ret = 0;
- ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
- if (ret) {
- dev_err(motg->phy.dev, "usb phy clk assert failed\n");
+ if (!motg->pdata->phy_clk_reset)
return ret;
- }
- usleep_range(10000, 12000);
- ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
+
+ ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
if (ret)
- dev_err(motg->phy.dev, "usb phy clk deassert failed\n");
+ dev_err(motg->phy.dev, "usb phy clk reset failed\n");
+
return ret;
}
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 22a396c..3275483 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -20,6 +20,7 @@
#include <linux/types.h>
#include <linux/usb/otg.h>
+#include <linux/clk.h>
/**
* Supported USB modes
@@ -135,6 +136,8 @@
enum msm_usb_phy_type phy_type;
void (*setup_gpio)(enum usb_otg_state state);
char *pclk_src_name;
+ int (*link_clk_reset)(struct clk *link_clk, bool assert);
+ int (*phy_clk_reset)(struct clk *phy_clk);
};
/**