| /* |
| * Copyright (c) 2014 Linaro Ltd. |
| * Copyright (c) 2014 Hisilicon Limited. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| #include <media/rc-core.h> |
| |
| /* Allow the driver to compile on all architectures */ |
| #ifndef writel_relaxed |
| # define writel_relaxed writel |
| #endif |
| #ifndef readl_relaxed |
| # define readl_relaxed readl |
| #endif |
| |
| #define IR_ENABLE 0x00 |
| #define IR_CONFIG 0x04 |
| #define CNT_LEADS 0x08 |
| #define CNT_LEADE 0x0c |
| #define CNT_SLEADE 0x10 |
| #define CNT0_B 0x14 |
| #define CNT1_B 0x18 |
| #define IR_BUSY 0x1c |
| #define IR_DATAH 0x20 |
| #define IR_DATAL 0x24 |
| #define IR_INTM 0x28 |
| #define IR_INTS 0x2c |
| #define IR_INTC 0x30 |
| #define IR_START 0x34 |
| |
| /* interrupt mask */ |
| #define INTMS_SYMBRCV (BIT(24) | BIT(8)) |
| #define INTMS_TIMEOUT (BIT(25) | BIT(9)) |
| #define INTMS_OVERFLOW (BIT(26) | BIT(10)) |
| #define INT_CLR_OVERFLOW BIT(18) |
| #define INT_CLR_TIMEOUT BIT(17) |
| #define INT_CLR_RCV BIT(16) |
| #define INT_CLR_RCVTIMEOUT (BIT(16) | BIT(17)) |
| |
| #define IR_CLK 0x48 |
| #define IR_CLK_ENABLE BIT(4) |
| #define IR_CLK_RESET BIT(5) |
| |
| #define IR_CFG_WIDTH_MASK 0xffff |
| #define IR_CFG_WIDTH_SHIFT 16 |
| #define IR_CFG_FORMAT_MASK 0x3 |
| #define IR_CFG_FORMAT_SHIFT 14 |
| #define IR_CFG_INT_LEVEL_MASK 0x3f |
| #define IR_CFG_INT_LEVEL_SHIFT 8 |
| /* only support raw mode */ |
| #define IR_CFG_MODE_RAW BIT(7) |
| #define IR_CFG_FREQ_MASK 0x7f |
| #define IR_CFG_FREQ_SHIFT 0 |
| #define IR_CFG_INT_THRESHOLD 1 |
| /* symbol start from low to high, symbol stream end at high*/ |
| #define IR_CFG_SYMBOL_FMT 0 |
| #define IR_CFG_SYMBOL_MAXWIDTH 0x3e80 |
| |
| #define IR_HIX5HD2_NAME "hix5hd2-ir" |
| |
| struct hix5hd2_ir_priv { |
| int irq; |
| void volatile __iomem *base; |
| struct device *dev; |
| struct rc_dev *rdev; |
| struct regmap *regmap; |
| struct clk *clock; |
| unsigned long rate; |
| }; |
| |
| static void hix5hd2_ir_enable(struct hix5hd2_ir_priv *dev, bool on) |
| { |
| u32 val; |
| |
| regmap_read(dev->regmap, IR_CLK, &val); |
| if (on) { |
| val &= ~IR_CLK_RESET; |
| val |= IR_CLK_ENABLE; |
| } else { |
| val &= ~IR_CLK_ENABLE; |
| val |= IR_CLK_RESET; |
| } |
| regmap_write(dev->regmap, IR_CLK, val); |
| } |
| |
| static int hix5hd2_ir_config(struct hix5hd2_ir_priv *priv) |
| { |
| int timeout = 10000; |
| u32 val, rate; |
| |
| writel_relaxed(0x01, priv->base + IR_ENABLE); |
| while (readl_relaxed(priv->base + IR_BUSY)) { |
| if (timeout--) { |
| udelay(1); |
| } else { |
| dev_err(priv->dev, "IR_BUSY timeout\n"); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| /* Now only support raw mode, with symbol start from low to high */ |
| rate = DIV_ROUND_CLOSEST(priv->rate, 1000000); |
| val = IR_CFG_SYMBOL_MAXWIDTH & IR_CFG_WIDTH_MASK << IR_CFG_WIDTH_SHIFT; |
| val |= IR_CFG_SYMBOL_FMT & IR_CFG_FORMAT_MASK << IR_CFG_FORMAT_SHIFT; |
| val |= (IR_CFG_INT_THRESHOLD - 1) & IR_CFG_INT_LEVEL_MASK |
| << IR_CFG_INT_LEVEL_SHIFT; |
| val |= IR_CFG_MODE_RAW; |
| val |= (rate - 1) & IR_CFG_FREQ_MASK << IR_CFG_FREQ_SHIFT; |
| writel_relaxed(val, priv->base + IR_CONFIG); |
| |
| writel_relaxed(0x00, priv->base + IR_INTM); |
| /* write arbitrary value to start */ |
| writel_relaxed(0x01, priv->base + IR_START); |
| return 0; |
| } |
| |
| static int hix5hd2_ir_open(struct rc_dev *rdev) |
| { |
| struct hix5hd2_ir_priv *priv = rdev->priv; |
| |
| hix5hd2_ir_enable(priv, true); |
| return hix5hd2_ir_config(priv); |
| } |
| |
| static void hix5hd2_ir_close(struct rc_dev *rdev) |
| { |
| struct hix5hd2_ir_priv *priv = rdev->priv; |
| |
| hix5hd2_ir_enable(priv, false); |
| } |
| |
| static irqreturn_t hix5hd2_ir_rx_interrupt(int irq, void *data) |
| { |
| u32 symb_num, symb_val, symb_time; |
| u32 data_l, data_h; |
| u32 irq_sr, i; |
| struct hix5hd2_ir_priv *priv = data; |
| |
| irq_sr = readl_relaxed(priv->base + IR_INTS); |
| if (irq_sr & INTMS_OVERFLOW) { |
| /* |
| * we must read IR_DATAL first, then we can clean up |
| * IR_INTS availably since logic would not clear |
| * fifo when overflow, drv do the job |
| */ |
| ir_raw_event_reset(priv->rdev); |
| symb_num = readl_relaxed(priv->base + IR_DATAH); |
| for (i = 0; i < symb_num; i++) |
| readl_relaxed(priv->base + IR_DATAL); |
| |
| writel_relaxed(INT_CLR_OVERFLOW, priv->base + IR_INTC); |
| dev_info(priv->dev, "overflow, level=%d\n", |
| IR_CFG_INT_THRESHOLD); |
| } |
| |
| if ((irq_sr & INTMS_SYMBRCV) || (irq_sr & INTMS_TIMEOUT)) { |
| DEFINE_IR_RAW_EVENT(ev); |
| |
| symb_num = readl_relaxed(priv->base + IR_DATAH); |
| for (i = 0; i < symb_num; i++) { |
| symb_val = readl_relaxed(priv->base + IR_DATAL); |
| data_l = ((symb_val & 0xffff) * 10); |
| data_h = ((symb_val >> 16) & 0xffff) * 10; |
| symb_time = (data_l + data_h) / 10; |
| |
| ev.duration = US_TO_NS(data_l); |
| ev.pulse = true; |
| ir_raw_event_store(priv->rdev, &ev); |
| |
| if (symb_time < IR_CFG_SYMBOL_MAXWIDTH) { |
| ev.duration = US_TO_NS(data_h); |
| ev.pulse = false; |
| ir_raw_event_store(priv->rdev, &ev); |
| } else { |
| ir_raw_event_set_idle(priv->rdev, true); |
| } |
| } |
| |
| if (irq_sr & INTMS_SYMBRCV) |
| writel_relaxed(INT_CLR_RCV, priv->base + IR_INTC); |
| if (irq_sr & INTMS_TIMEOUT) |
| writel_relaxed(INT_CLR_TIMEOUT, priv->base + IR_INTC); |
| } |
| |
| /* Empty software fifo */ |
| ir_raw_event_handle(priv->rdev); |
| return IRQ_HANDLED; |
| } |
| |
| static int hix5hd2_ir_probe(struct platform_device *pdev) |
| { |
| struct rc_dev *rdev; |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct hix5hd2_ir_priv *priv; |
| struct device_node *node = pdev->dev.of_node; |
| const char *map_name; |
| int ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->regmap = syscon_regmap_lookup_by_phandle(node, |
| "hisilicon,power-syscon"); |
| if (IS_ERR(priv->regmap)) { |
| dev_err(dev, "no power-reg\n"); |
| return -EINVAL; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR((__force void *)priv->base)) |
| return PTR_ERR((__force void *)priv->base); |
| |
| priv->irq = platform_get_irq(pdev, 0); |
| if (priv->irq < 0) { |
| dev_err(dev, "irq can not get\n"); |
| return priv->irq; |
| } |
| |
| rdev = rc_allocate_device(); |
| if (!rdev) |
| return -ENOMEM; |
| |
| priv->clock = devm_clk_get(dev, NULL); |
| if (IS_ERR(priv->clock)) { |
| dev_err(dev, "clock not found\n"); |
| ret = PTR_ERR(priv->clock); |
| goto err; |
| } |
| clk_prepare_enable(priv->clock); |
| priv->rate = clk_get_rate(priv->clock); |
| |
| rdev->driver_type = RC_DRIVER_IR_RAW; |
| rdev->allowed_protocols = RC_BIT_ALL; |
| rdev->priv = priv; |
| rdev->open = hix5hd2_ir_open; |
| rdev->close = hix5hd2_ir_close; |
| rdev->driver_name = IR_HIX5HD2_NAME; |
| map_name = of_get_property(node, "linux,rc-map-name", NULL); |
| rdev->map_name = map_name ?: RC_MAP_EMPTY; |
| rdev->input_name = IR_HIX5HD2_NAME; |
| rdev->input_phys = IR_HIX5HD2_NAME "/input0"; |
| rdev->input_id.bustype = BUS_HOST; |
| rdev->input_id.vendor = 0x0001; |
| rdev->input_id.product = 0x0001; |
| rdev->input_id.version = 0x0100; |
| rdev->rx_resolution = US_TO_NS(10); |
| rdev->timeout = US_TO_NS(IR_CFG_SYMBOL_MAXWIDTH * 10); |
| |
| ret = rc_register_device(rdev); |
| if (ret < 0) |
| goto clkerr; |
| |
| if (devm_request_irq(dev, priv->irq, hix5hd2_ir_rx_interrupt, |
| IRQF_NO_SUSPEND, pdev->name, priv) < 0) { |
| dev_err(dev, "IRQ %d register failed\n", priv->irq); |
| ret = -EINVAL; |
| goto regerr; |
| } |
| |
| priv->rdev = rdev; |
| priv->dev = dev; |
| platform_set_drvdata(pdev, priv); |
| |
| return ret; |
| |
| regerr: |
| rc_unregister_device(rdev); |
| rdev = NULL; |
| clkerr: |
| clk_disable_unprepare(priv->clock); |
| err: |
| rc_free_device(rdev); |
| dev_err(dev, "Unable to register device (%d)\n", ret); |
| return ret; |
| } |
| |
| static int hix5hd2_ir_remove(struct platform_device *pdev) |
| { |
| struct hix5hd2_ir_priv *priv = platform_get_drvdata(pdev); |
| |
| clk_disable_unprepare(priv->clock); |
| rc_unregister_device(priv->rdev); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int hix5hd2_ir_suspend(struct device *dev) |
| { |
| struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev); |
| |
| clk_disable_unprepare(priv->clock); |
| hix5hd2_ir_enable(priv, false); |
| |
| return 0; |
| } |
| |
| static int hix5hd2_ir_resume(struct device *dev) |
| { |
| struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev); |
| |
| hix5hd2_ir_enable(priv, true); |
| clk_prepare_enable(priv->clock); |
| |
| writel_relaxed(0x01, priv->base + IR_ENABLE); |
| writel_relaxed(0x00, priv->base + IR_INTM); |
| writel_relaxed(0xff, priv->base + IR_INTC); |
| writel_relaxed(0x01, priv->base + IR_START); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(hix5hd2_ir_pm_ops, hix5hd2_ir_suspend, |
| hix5hd2_ir_resume); |
| |
| static struct of_device_id hix5hd2_ir_table[] = { |
| { .compatible = "hisilicon,hix5hd2-ir", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, hix5hd2_ir_table); |
| |
| static struct platform_driver hix5hd2_ir_driver = { |
| .driver = { |
| .name = IR_HIX5HD2_NAME, |
| .of_match_table = hix5hd2_ir_table, |
| .pm = &hix5hd2_ir_pm_ops, |
| }, |
| .probe = hix5hd2_ir_probe, |
| .remove = hix5hd2_ir_remove, |
| }; |
| |
| module_platform_driver(hix5hd2_ir_driver); |
| |
| MODULE_DESCRIPTION("IR controller driver for hix5hd2 platforms"); |
| MODULE_AUTHOR("Guoxiong Yan <yanguoxiong@huawei.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:hix5hd2-ir"); |