diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 3ad6ace..d9bcffd 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -69,7 +69,6 @@
 bbootsect
 bin2c
 binkernel.spec
-binoffset
 bootsect
 bounds.h
 bsetup
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 736d456..3e69c1c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -199,6 +199,10 @@
 			acpi_display_output=video
 			See above.
 
+	acpi_early_pdc_eval	[HW,ACPI] Evaluate processor _PDC methods
+				early. Needed on some platforms to properly
+				initialize the EC.
+
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode
@@ -311,6 +315,11 @@
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
+	alignment=	[KNL,ARM]
+			Allow the default userspace alignment fault handler
+			behaviour to be specified.  Bit 0 enables warnings,
+			bit 1 enables fixups, and bit 2 sends a segfault.
+
 	amd_iommu=	[HW,X86-84]
 			Pass parameters to the AMD IOMMU driver in the system.
 			Possible values are:
@@ -1939,8 +1948,12 @@
 				IRQ routing is enabled.
 		noacpi		[X86] Do not use ACPI for IRQ routing
 				or for PCI scanning.
-		use_crs		[X86] Use _CRS for PCI resource
-				allocation.
+		use_crs		[X86] Use PCI host bridge window information
+				from ACPI.  On BIOSes from 2008 or later, this
+				is enabled by default.  If you need to use this,
+				please report a bug.
+		nocrs		[X86] Ignore PCI host bridge windows from ACPI.
+			        If you need to use this, please report a bug.
 		routeirq	Do IRQ routing for all PCI devices.
 				This is normally done in pci_enable_device(),
 				so this option is a temporary workaround
@@ -1989,6 +2002,14 @@
 		force	Enable ASPM even on devices that claim not to support it.
 			WARNING: Forcing ASPM on may cause system lockups.
 
+	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
+		off	Do not use native PCIe PME signaling.
+		force	Use native PCIe PME signaling even if the BIOS refuses
+			to allow the kernel to control the relevant PCIe config
+			registers.
+		nomsi	Do not use MSI for native PCIe PME signaling (this makes
+			all PCIe root ports use INTx for everything).
+
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
 	pd.		[PARIDE]
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 4220851..3119f5d 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -34,7 +34,6 @@
 #include <sys/uio.h>
 #include <termios.h>
 #include <getopt.h>
-#include <zlib.h>
 #include <assert.h>
 #include <sched.h>
 #include <limits.h>
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 006b39d..e87f3cdc 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1074,10 +1074,10 @@
 	Default: 5
 
 max_addresses - INTEGER
-	Number of maximum addresses per interface.  0 disables limitation.
-	It is recommended not set too large value (or 0) because it would
-	be too easy way to crash kernel to allow to create too much of
-	autoconfigured addresses.
+	Maximum number of autoconfigured addresses per interface.  Setting
+	to zero disables the limitation.  It is not recommended to set this
+	value too large (or to zero) because it would be an easy way to
+	crash the kernel by allowing too many addresses to be created.
 	Default: 16
 
 disable_ipv6 - BOOLEAN
diff --git a/MAINTAINERS b/MAINTAINERS
index 412eff6..317ed38 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -616,10 +616,10 @@
 S:	Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://gitorious.org/linux-gemini/mainline.git
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -641,9 +641,9 @@
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
@@ -1733,10 +1733,9 @@
 F:	net/dccp/
 
 DECnet NETWORK LAYER
-M:	Christine Caulfield <christine.caulfield@googlemail.com>
 W:	http://linux-decnet.sourceforge.net
 L:	linux-decnet-user@lists.sourceforge.net
-S:	Maintained
+S:	Orphan
 F:	Documentation/networking/decnet.txt
 F:	net/decnet/
 
@@ -2394,6 +2393,12 @@
 S:	Odd Fixes
 F:	drivers/char/hvc_*
 
+VIRTIO CONSOLE DRIVER
+M:	Amit Shah <amit.shah@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/char/virtio_console.c
+
 GSPCA FINEPIX SUBDRIVER
 M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
@@ -3490,9 +3495,9 @@
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
-M:	Lennert Buytenhek <buytenh@marvell.com>
+M:	Lennert Buytenhek <buytenh@wantstofly.org>
 L:	netdev@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/net/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
diff --git a/Makefile b/Makefile
index 12b1aa1..1b24895 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 33
-EXTRAVERSION = -rc8
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index a91ba28..c9ab94e 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -126,8 +126,8 @@
 #define MB			(1024*KB)
 #define GB			(1024*MB)
 
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 		       resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
@@ -184,7 +184,7 @@
 		}
 	}
 
-	res->start = start;
+	return start;
 }
 #undef KB
 #undef MB
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index c77d2fa..8113bb5 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -42,7 +42,8 @@
 #endif
 
 #if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+    defined(CONFIG_CPU_ARM1026)
 # define MULTI_CACHE 1
 #endif
 
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 8096819..bd397e0 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -616,15 +616,17 @@
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might be mirrored at 0x0100-0x03ff..
  */
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
 	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO && start & 0x300)
 		start = (start + 0x3ff) & ~0x3ff;
 
-	res->start = (start + align - 1) & ~(align - 1);
+	start = (start + align - 1) & ~(align - 1);
+
+	return start;
 }
 
 /**
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c6c57b6..621acad 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -102,6 +102,7 @@
 #endif
 #ifdef CONFIG_OUTER_CACHE
 struct outer_cache_fns outer_cache;
+EXPORT_SYMBOL(outer_cache);
 #endif
 
 struct stack {
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index e726385..fe3bd5a 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -86,7 +86,7 @@
 	unsigned int reg_both, reg_level, reg_type;
 
 	reg_type = __raw_readl(base + GPIO_INT_TYPE);
-	reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+	reg_level = __raw_readl(base + GPIO_INT_LEVEL);
 	reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
 
 	switch (type) {
@@ -117,7 +117,7 @@
 	}
 
 	__raw_writel(reg_type, base + GPIO_INT_TYPE);
-	__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+	__raw_writel(reg_level, base + GPIO_INT_LEVEL);
 	__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
 
 	gpio_ack_irq(irq);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index f93c596..9bf33b3 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -86,11 +86,19 @@
 	},
 };
 
+static struct amba_device cpu8815_amba_rng = {
+	.dev = {
+		.init_name = "rng",
+	},
+	__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
+};
+
 static struct amba_device *amba_devs[] __initdata = {
 	cpu8815_amba_gpio + 0,
 	cpu8815_amba_gpio + 1,
 	cpu8815_amba_gpio + 2,
 	cpu8815_amba_gpio + 3,
+	&cpu8815_amba_rng
 };
 
 static int __init cpu8815_init(void)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 5fedc50..5fef73f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -961,16 +961,14 @@
 	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
 		struct omap_mux *entry;
 
-#ifndef CONFIG_OMAP_MUX
-		/* Skip pins that are not muxed as GPIO by bootloader */
-		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
+#ifdef CONFIG_OMAP_MUX
+		if (!superset->muxnames || !superset->muxnames[0]) {
 			superset++;
 			continue;
 		}
-#endif
-
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
-		if (!superset->muxnames || !superset->muxnames[0]) {
+#else
+		/* Skip pins that are not muxed as GPIO by bootloader */
+		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
 			superset++;
 			continue;
 		}
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index b270d62..62820ed 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -11,6 +11,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/moduleparam.h>
 #include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -77,6 +78,8 @@
 static unsigned long ai_multi;
 static int ai_usermode;
 
+core_param(alignment, ai_usermode, int, 0600);
+
 #define UM_WARN		(1 << 0)
 #define UM_FIXUP	(1 << 1)
 #define UM_SIGNAL	(1 << 2)
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 5a79fc6..31c2f4c 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jan 28 22:15:54 2010
+# Last update: Sat Feb 20 14:16:15 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2257,7 +2257,7 @@
 oratismadi		MACH_ORATISMADI		ORATISMADI		2269
 oratisot16		MACH_ORATISOT16		ORATISOT16		2270
 oratisdesk		MACH_ORATISDESK		ORATISDESK		2271
-v2_ca9			MACH_V2P_CA9		V2P_CA9			2272
+vexpress		MACH_VEXPRESS		VEXPRESS		2272
 sintexo			MACH_SINTEXO		SINTEXO			2273
 cm3389			MACH_CM3389		CM3389			2274
 omap3_cio		MACH_OMAP3_CIO		OMAP3_CIO		2275
@@ -2636,3 +2636,45 @@
 dm365_leopard		MACH_DM365_LEOPARD	DM365_LEOPARD		2649
 mityomapl138		MACH_MITYOMAPL138	MITYOMAPL138		2650
 scat110			MACH_SCAT110		SCAT110			2651
+acer_a1			MACH_ACER_A1		ACER_A1			2652
+cmcontrol		MACH_CMCONTROL		CMCONTROL		2653
+pelco_lamar		MACH_PELCO_LAMAR	PELCO_LAMAR		2654
+rfp43			MACH_RFP43		RFP43			2655
+sk86r0301		MACH_SK86R0301		SK86R0301		2656
+ctpxa			MACH_CTPXA		CTPXA			2657
+epb_arm9_a		MACH_EPB_ARM9_A		EPB_ARM9_A		2658
+guruplug		MACH_GURUPLUG		GURUPLUG		2659
+spear310		MACH_SPEAR310		SPEAR310		2660
+spear320		MACH_SPEAR320		SPEAR320		2661
+robotx			MACH_ROBOTX		ROBOTX			2662
+lsxhl			MACH_LSXHL		LSXHL			2663
+smartlite		MACH_SMARTLITE		SMARTLITE		2664
+cws2			MACH_CWS2		CWS2			2665
+m619			MACH_M619		M619			2666
+smartview		MACH_SMARTVIEW		SMARTVIEW		2667
+lsa_salsa		MACH_LSA_SALSA		LSA_SALSA		2668
+kizbox			MACH_KIZBOX		KIZBOX			2669
+htccharmer		MACH_HTCCHARMER		HTCCHARMER		2670
+guf_neso_lt		MACH_GUF_NESO_LT	GUF_NESO_LT		2671
+pm9g45			MACH_PM9G45		PM9G45			2672
+htcpanther		MACH_HTCPANTHER		HTCPANTHER		2673
+htcpanther_cdma		MACH_HTCPANTHER_CDMA	HTCPANTHER_CDMA		2674
+reb01			MACH_REB01		REB01			2675
+aquila			MACH_AQUILA		AQUILA			2676
+spark_sls_hw2		MACH_SPARK_SLS_HW2	SPARK_SLS_HW2		2677
+sheeva_esata		MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
+surf7x30		MACH_SURF7X30		SURF7X30		2679
+micro2440		MACH_MICRO2440		MICRO2440		2680
+am2440			MACH_AM2440		AM2440			2681
+tq2440			MACH_TQ2440		TQ2440			2682
+lpc2478oem		MACH_LPC2478OEM		LPC2478OEM		2683
+ak880x			MACH_AK880X		AK880X			2684
+cobra3530		MACH_COBRA3530		COBRA3530		2685
+pmppb			MACH_PMPPB		PMPPB			2686
+u6715			MACH_U6715		U6715			2687
+axar1500_sender		MACH_AXAR1500_SENDER	AXAR1500_SENDER		2688
+g30_dvb			MACH_G30_DVB		G30_DVB			2689
+vc088x			MACH_VC088X		VC088X			2690
+mioa702			MACH_MIOA702		MIOA702			2691
+hpmin			MACH_HPMIN		HPMIN			2692
+ak880xak		MACH_AK880XAK		AK880XAK		2693
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
index 77ee319..d4b9c36 100644
--- a/arch/cris/arch-v32/drivers/pci/bios.c
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -41,18 +41,16 @@
 	return 0;
 }
 
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 		       resource_size_t size, resource_size_t align)
 {
-	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
+	resource_size_t start = res->start;
 
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
+
+	return start
 }
 
 int pcibios_enable_resources(struct pci_dev *dev, int mask)
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 566bdeb..1ed15d7 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -32,18 +32,16 @@
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 		       resource_size_t size, resource_size_t align)
 {
-	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
+	resource_size_t start = res->start;
 
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
+
+	return start
 }
 
 
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 7ae5889..93997bd 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -94,9 +94,11 @@
 #define acpi_noirq 0	/* ACPI always enabled on IA64 */
 #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
 #define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+#define acpi_ht 0	/* no HT-only mode on IA64 */
 #endif
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }
+static inline void pci_acpi_crs_quirks(void) { }
 
 const char *acpi_get_sysname (void);
 int acpi_request_vector (u32 int_type);
diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h
index e14108b..4c41656 100644
--- a/arch/ia64/include/asm/elf.h
+++ b/arch/ia64/include/asm/elf.h
@@ -201,7 +201,9 @@
    relevant until we have real hardware to play with... */
 #define ELF_PLATFORM	NULL
 
-#define SET_PERSONALITY(ex)	set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex)	\
+	set_personality((current->personality & ~PER_MASK) | PER_LINUX)
+
 #define elf_read_implies_exec(ex, executable_stack)					\
 	((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
 
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index df639db7..64aff52 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -320,9 +320,9 @@
 static void __devinit
 pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
 {
-	int i, j;
+	int i;
 
-	j = 0;
+	pci_bus_remove_resources(bus);
 	for (i = 0; i < ctrl->windows; i++) {
 		struct resource *res = &ctrl->window[i].resource;
 		/* HP's firmware has a hack to work around a Windows bug.
@@ -330,13 +330,7 @@
 		if ((res->flags & IORESOURCE_MEM) &&
 		    (res->end - res->start < 16))
 			continue;
-		if (j >= PCI_BUS_NUM_RESOURCES) {
-			dev_warn(&bus->dev,
-				 "ignoring host bridge window %pR (no space)\n",
-				 res);
-			continue;
-		}
-		bus->resource[j++] = res;
+		pci_bus_add_resource(bus, res, 0);
 	}
 }
 
@@ -452,13 +446,12 @@
 static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
 {
 	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
-	struct resource *devr = &dev->resource[idx];
+	struct resource *devr = &dev->resource[idx], *busr;
 
 	if (!dev->bus)
 		return 0;
-	for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) {
-		struct resource *busr = dev->bus->resource[i];
 
+	pci_bus_for_each_resource(dev->bus, busr, i) {
 		if (!busr || ((busr->flags ^ devr->flags) & type_mask))
 			continue;
 		if ((devr->start) && (devr->start >= busr->start) &&
@@ -547,10 +540,11 @@
 		acpi_pci_irq_disable(dev);
 }
 
-void
-pcibios_align_resource (void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource (void *data, const struct resource *res,
 		        resource_size_t size, resource_size_t align)
 {
+	return res->start;
 }
 
 /*
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index ece1bf9..e456f06 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -71,7 +71,7 @@
 DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
 EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
 
-DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid);
+DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
 EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
 
 DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index cd5837e..b008168 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -130,6 +130,7 @@
 
 config OF
 	def_bool y
+	select OF_FLATTREE
 
 config PROC_DEVICETREE
 	bool "Support for device tree in /proc"
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index fc9997b..267c7c7 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -217,7 +217,7 @@
  * Little endian
  */
 
-#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a));
+#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
 #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
 
 #define in_le32(a) __le32_to_cpu(__raw_readl(a))
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index ef3ec1d6..03f45a9 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -26,31 +26,11 @@
 #include <asm/irq.h>
 #include <asm/atomic.h>
 
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	1
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
-
-#define of_compat_cmp(s1, s2, l)	strncasecmp((s1), (s2), (l))
-#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
-#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
-
-extern struct device_node *of_chosen;
-
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-extern struct device_node *allnodes;	/* temporary while merging */
-extern rwlock_t devtree_lock;	/* temporary while merging */
-
-/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-
 /* Other Prototypes */
 extern int early_uartlite_console(void);
 
-extern struct resource *request_OF_resource(struct device_node *node,
-				int index, const char *name_postfix);
-extern int release_OF_resource(struct device_node *node, int index);
-
 /*
  * OF address retreival & translation
  */
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index d9d6383..2a56bcc 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -172,16 +172,15 @@
 /* It is used only first parameter for OP - for wic, wdc */
 #define CACHE_RANGE_LOOP_1(start, end, line_length, op)			\
 do {									\
-	int step = -line_length;					\
-	int count = end - start;					\
-	BUG_ON(count <= 0);						\
+	int volatile temp;						\
+	BUG_ON(end - start <= 0);					\
 									\
-	__asm__ __volatile__ (" 1:	addk	%0, %0, %1;		\
-					" #op " %0, r0;			\
-					bgtid   %1, 1b;			\
-					addk    %1, %1, %2;		\
-					" : : "r" (start), "r" (count),	\
-					"r" (step) : "memory");		\
+	__asm__ __volatile__ (" 1:	" #op " %1, r0;			\
+					cmpu	%0, %1, %2;		\
+					bgtid	%0, 1b;			\
+					addk	%1, %1, %3;		\
+				" : : "r" (temp), "r" (start), "r" (end),\
+					"r" (line_length) : "memory");	\
 } while (0);
 
 static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
@@ -313,16 +312,6 @@
 	pr_debug("%s\n", __func__);
 	CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
 					wdc.clear)
-
-#if 0
-	unsigned int i;
-
-	pr_debug("%s\n", __func__);
-
-	/* Just loop through cache size and invalidate it */
-	for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length)
-			__invalidate_dcache(0, i);
-#endif
 }
 
 static void __invalidate_dcache_range_wb(unsigned long start,
diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c
index acf4574..1c6d684 100644
--- a/arch/microblaze/kernel/of_platform.c
+++ b/arch/microblaze/kernel/of_platform.c
@@ -185,7 +185,7 @@
 static int of_dev_phandle_match(struct device *dev, void *data)
 {
 	phandle *ph = data;
-	return to_of_device(dev)->node->linux_phandle == *ph;
+	return to_of_device(dev)->node->phandle == *ph;
 }
 
 struct of_device *of_find_device_by_phandle(phandle ph)
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index b817df1..a15ef6d 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -42,698 +42,21 @@
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
 
-static int __initdata dt_root_addr_cells;
-static int __initdata dt_root_size_cells;
-
-typedef u32 cell_t;
-
-static struct boot_param_header *initial_boot_params;
-
-/* export that to outside world */
-struct device_node *of_chosen;
-
-static inline char *find_flat_dt_string(u32 offset)
+void __init early_init_dt_scan_chosen_arch(unsigned long node)
 {
-	return ((char *)initial_boot_params) +
-		initial_boot_params->off_dt_strings + offset;
+	/* No Microblaze specific code here */
 }
 
-/**
- * This function is used to scan the flattened device-tree, it is
- * used to extract the memory informations at boot before we can
- * unflatten the tree
- */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
-				     const char *uname, int depth,
-				     void *data),
-			   void *data)
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
-	unsigned long p = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	int rc = 0;
-	int depth = -1;
-
-	do {
-		u32 tag = *((u32 *)p);
-		char *pathp;
-
-		p += 4;
-		if (tag == OF_DT_END_NODE) {
-			depth--;
-			continue;
-		}
-		if (tag == OF_DT_NOP)
-			continue;
-		if (tag == OF_DT_END)
-			break;
-		if (tag == OF_DT_PROP) {
-			u32 sz = *((u32 *)p);
-			p += 8;
-			if (initial_boot_params->version < 0x10)
-				p = _ALIGN(p, sz >= 8 ? 8 : 4);
-			p += sz;
-			p = _ALIGN(p, 4);
-			continue;
-		}
-		if (tag != OF_DT_BEGIN_NODE) {
-			printk(KERN_WARNING "Invalid tag %x scanning flattened"
-				" device tree !\n", tag);
-			return -EINVAL;
-		}
-		depth++;
-		pathp = (char *)p;
-		p = _ALIGN(p + strlen(pathp) + 1, 4);
-		if ((*pathp) == '/') {
-			char *lp, *np;
-			for (lp = NULL, np = pathp; *np; np++)
-				if ((*np) == '/')
-					lp = np+1;
-			if (lp != NULL)
-				pathp = lp;
-		}
-		rc = it(p, pathp, depth, data);
-		if (rc != 0)
-			break;
-	} while (1);
-
-	return rc;
+	lmb_add(base, size);
 }
 
-unsigned long __init of_get_flat_dt_root(void)
+u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	unsigned long p = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-
-	while (*((u32 *)p) == OF_DT_NOP)
-		p += 4;
-	BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE);
-	p += 4;
-	return _ALIGN(p + strlen((char *)p) + 1, 4);
+	return lmb_alloc(size, align);
 }
 
-/**
- * This function can be used within scan_flattened_dt callback to get
- * access to properties
- */
-void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
-				unsigned long *size)
-{
-	unsigned long p = node;
-
-	do {
-		u32 tag = *((u32 *)p);
-		u32 sz, noff;
-		const char *nstr;
-
-		p += 4;
-		if (tag == OF_DT_NOP)
-			continue;
-		if (tag != OF_DT_PROP)
-			return NULL;
-
-		sz = *((u32 *)p);
-		noff = *((u32 *)(p + 4));
-		p += 8;
-		if (initial_boot_params->version < 0x10)
-			p = _ALIGN(p, sz >= 8 ? 8 : 4);
-
-		nstr = find_flat_dt_string(noff);
-		if (nstr == NULL) {
-			printk(KERN_WARNING "Can't find property index"
-				" name !\n");
-			return NULL;
-		}
-		if (strcmp(name, nstr) == 0) {
-			if (size)
-				*size = sz;
-			return (void *)p;
-		}
-		p += sz;
-		p = _ALIGN(p, 4);
-	} while (1);
-}
-
-int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
-{
-	const char *cp;
-	unsigned long cplen, l;
-
-	cp = of_get_flat_dt_prop(node, "compatible", &cplen);
-	if (cp == NULL)
-		return 0;
-	while (cplen > 0) {
-		if (strncasecmp(cp, compat, strlen(compat)) == 0)
-			return 1;
-		l = strlen(cp) + 1;
-		cp += l;
-		cplen -= l;
-	}
-
-	return 0;
-}
-
-static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
-					unsigned long align)
-{
-	void *res;
-
-	*mem = _ALIGN(*mem, align);
-	res = (void *)*mem;
-	*mem += size;
-
-	return res;
-}
-
-static unsigned long __init unflatten_dt_node(unsigned long mem,
-					unsigned long *p,
-					struct device_node *dad,
-					struct device_node ***allnextpp,
-					unsigned long fpsize)
-{
-	struct device_node *np;
-	struct property *pp, **prev_pp = NULL;
-	char *pathp;
-	u32 tag;
-	unsigned int l, allocl;
-	int has_name = 0;
-	int new_format = 0;
-
-	tag = *((u32 *)(*p));
-	if (tag != OF_DT_BEGIN_NODE) {
-		printk("Weird tag at start of node: %x\n", tag);
-		return mem;
-	}
-	*p += 4;
-	pathp = (char *)*p;
-	l = allocl = strlen(pathp) + 1;
-	*p = _ALIGN(*p + l, 4);
-
-	/* version 0x10 has a more compact unit name here instead of the full
-	 * path. we accumulate the full path size using "fpsize", we'll rebuild
-	 * it later. We detect this because the first character of the name is
-	 * not '/'.
-	 */
-	if ((*pathp) != '/') {
-		new_format = 1;
-		if (fpsize == 0) {
-			/* root node: special case. fpsize accounts for path
-			 * plus terminating zero. root node only has '/', so
-			 * fpsize should be 2, but we want to avoid the first
-			 * level nodes to have two '/' so we use fpsize 1 here
-			 */
-			fpsize = 1;
-			allocl = 2;
-		} else {
-			/* account for '/' and path size minus terminal 0
-			 * already in 'l'
-			 */
-			fpsize += l;
-			allocl = fpsize;
-		}
-	}
-
-	np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
-				__alignof__(struct device_node));
-	if (allnextpp) {
-		memset(np, 0, sizeof(*np));
-		np->full_name = ((char *)np) + sizeof(struct device_node);
-		if (new_format) {
-			char *p2 = np->full_name;
-			/* rebuild full path for new format */
-			if (dad && dad->parent) {
-				strcpy(p2, dad->full_name);
-#ifdef DEBUG
-				if ((strlen(p2) + l + 1) != allocl) {
-					pr_debug("%s: p: %d, l: %d, a: %d\n",
-						pathp, (int)strlen(p2),
-						l, allocl);
-				}
-#endif
-				p2 += strlen(p2);
-			}
-			*(p2++) = '/';
-			memcpy(p2, pathp, l);
-		} else
-			memcpy(np->full_name, pathp, l);
-		prev_pp = &np->properties;
-		**allnextpp = np;
-		*allnextpp = &np->allnext;
-		if (dad != NULL) {
-			np->parent = dad;
-			/* we temporarily use the next field as `last_child'*/
-			if (dad->next == NULL)
-				dad->child = np;
-			else
-				dad->next->sibling = np;
-			dad->next = np;
-		}
-		kref_init(&np->kref);
-	}
-	while (1) {
-		u32 sz, noff;
-		char *pname;
-
-		tag = *((u32 *)(*p));
-		if (tag == OF_DT_NOP) {
-			*p += 4;
-			continue;
-		}
-		if (tag != OF_DT_PROP)
-			break;
-		*p += 4;
-		sz = *((u32 *)(*p));
-		noff = *((u32 *)((*p) + 4));
-		*p += 8;
-		if (initial_boot_params->version < 0x10)
-			*p = _ALIGN(*p, sz >= 8 ? 8 : 4);
-
-		pname = find_flat_dt_string(noff);
-		if (pname == NULL) {
-			printk(KERN_INFO
-				"Can't find property name in list !\n");
-			break;
-		}
-		if (strcmp(pname, "name") == 0)
-			has_name = 1;
-		l = strlen(pname) + 1;
-		pp = unflatten_dt_alloc(&mem, sizeof(struct property),
-					__alignof__(struct property));
-		if (allnextpp) {
-			if (strcmp(pname, "linux,phandle") == 0) {
-				np->node = *((u32 *)*p);
-				if (np->linux_phandle == 0)
-					np->linux_phandle = np->node;
-			}
-			if (strcmp(pname, "ibm,phandle") == 0)
-				np->linux_phandle = *((u32 *)*p);
-			pp->name = pname;
-			pp->length = sz;
-			pp->value = (void *)*p;
-			*prev_pp = pp;
-			prev_pp = &pp->next;
-		}
-		*p = _ALIGN((*p) + sz, 4);
-	}
-	/* with version 0x10 we may not have the name property, recreate
-	 * it here from the unit name if absent
-	 */
-	if (!has_name) {
-		char *p1 = pathp, *ps = pathp, *pa = NULL;
-		int sz;
-
-		while (*p1) {
-			if ((*p1) == '@')
-				pa = p1;
-			if ((*p1) == '/')
-				ps = p1 + 1;
-			p1++;
-		}
-		if (pa < ps)
-			pa = p1;
-		sz = (pa - ps) + 1;
-		pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
-					__alignof__(struct property));
-		if (allnextpp) {
-			pp->name = "name";
-			pp->length = sz;
-			pp->value = pp + 1;
-			*prev_pp = pp;
-			prev_pp = &pp->next;
-			memcpy(pp->value, ps, sz - 1);
-			((char *)pp->value)[sz - 1] = 0;
-			pr_debug("fixed up name for %s -> %s\n", pathp,
-				(char *)pp->value);
-		}
-	}
-	if (allnextpp) {
-		*prev_pp = NULL;
-		np->name = of_get_property(np, "name", NULL);
-		np->type = of_get_property(np, "device_type", NULL);
-
-		if (!np->name)
-			np->name = "<NULL>";
-		if (!np->type)
-			np->type = "<NULL>";
-	}
-	while (tag == OF_DT_BEGIN_NODE) {
-		mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
-		tag = *((u32 *)(*p));
-	}
-	if (tag != OF_DT_END_NODE) {
-		printk(KERN_INFO "Weird tag at end of node: %x\n", tag);
-		return mem;
-	}
-	*p += 4;
-	return mem;
-}
-
-/**
- * unflattens the device-tree passed by the firmware, creating the
- * tree of struct device_node. It also fills the "name" and "type"
- * pointers of the nodes so the normal device-tree walking functions
- * can be used (this used to be done by finish_device_tree)
- */
-void __init unflatten_device_tree(void)
-{
-	unsigned long start, mem, size;
-	struct device_node **allnextp = &allnodes;
-
-	pr_debug(" -> unflatten_device_tree()\n");
-
-	/* First pass, scan for size */
-	start = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	size = unflatten_dt_node(0, &start, NULL, NULL, 0);
-	size = (size | 3) + 1;
-
-	pr_debug("  size is %lx, allocating...\n", size);
-
-	/* Allocate memory for the expanded device tree */
-	mem = lmb_alloc(size + 4, __alignof__(struct device_node));
-	mem = (unsigned long) __va(mem);
-
-	((u32 *)mem)[size / 4] = 0xdeadbeef;
-
-	pr_debug("  unflattening %lx...\n", mem);
-
-	/* Second pass, do actual unflattening */
-	start = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
-	if (*((u32 *)start) != OF_DT_END)
-		printk(KERN_WARNING "Weird tag at end of tree: %08x\n",
-			*((u32 *)start));
-	if (((u32 *)mem)[size / 4] != 0xdeadbeef)
-		printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
-			((u32 *)mem)[size / 4]);
-	*allnextp = NULL;
-
-	/* Get pointer to OF "/chosen" node for use everywhere */
-	of_chosen = of_find_node_by_path("/chosen");
-	if (of_chosen == NULL)
-		of_chosen = of_find_node_by_path("/chosen@0");
-
-	pr_debug(" <- unflatten_device_tree()\n");
-}
-
-#define early_init_dt_scan_drconf_memory(node) 0
-
-static int __init early_init_dt_scan_cpus(unsigned long node,
-					  const char *uname, int depth,
-					  void *data)
-{
-	static int logical_cpuid;
-	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	const u32 *intserv;
-	int i, nthreads;
-	int found = 0;
-
-	/* We are scanning "cpu" nodes only */
-	if (type == NULL || strcmp(type, "cpu") != 0)
-		return 0;
-
-	/* Get physical cpuid */
-	intserv = of_get_flat_dt_prop(node, "reg", NULL);
-	nthreads = 1;
-
-	/*
-	 * Now see if any of these threads match our boot cpu.
-	 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
-	 */
-	for (i = 0; i < nthreads; i++) {
-		/*
-		 * version 2 of the kexec param format adds the phys cpuid of
-		 * booted proc.
-		 */
-		if (initial_boot_params && initial_boot_params->version >= 2) {
-			if (intserv[i] ==
-					initial_boot_params->boot_cpuid_phys) {
-				found = 1;
-				break;
-			}
-		} else {
-			/*
-			 * Check if it's the boot-cpu, set it's hw index now,
-			 * unfortunately this format did not support booting
-			 * off secondary threads.
-			 */
-			if (of_get_flat_dt_prop(node,
-					"linux,boot-cpu", NULL) != NULL) {
-				found = 1;
-				break;
-			}
-		}
-
-#ifdef CONFIG_SMP
-		/* logical cpu id is always 0 on UP kernels */
-		logical_cpuid++;
-#endif
-	}
-
-	if (found) {
-		pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid,
-			intserv[i]);
-		boot_cpuid = logical_cpuid;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-static void __init early_init_dt_check_for_initrd(unsigned long node)
-{
-	unsigned long l;
-	u32 *prop;
-
-	pr_debug("Looking for initrd properties... ");
-
-	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
-	if (prop) {
-		initrd_start = (unsigned long)
-					__va((u32)of_read_ulong(prop, l/4));
-
-		prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
-		if (prop) {
-			initrd_end = (unsigned long)
-					__va((u32)of_read_ulong(prop, 1/4));
-			initrd_below_start_ok = 1;
-		} else {
-			initrd_start = 0;
-		}
-	}
-
-	pr_debug("initrd_start=0x%lx  initrd_end=0x%lx\n",
-					initrd_start, initrd_end);
-}
-#else
-static inline void early_init_dt_check_for_initrd(unsigned long node)
-{
-}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-static int __init early_init_dt_scan_chosen(unsigned long node,
-				const char *uname, int depth, void *data)
-{
-	unsigned long l;
-	char *p;
-
-	pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
-
-	if (depth != 1 ||
-		(strcmp(uname, "chosen") != 0 &&
-				strcmp(uname, "chosen@0") != 0))
-		return 0;
-
-#ifdef CONFIG_KEXEC
-	lprop = (u64 *)of_get_flat_dt_prop(node,
-				"linux,crashkernel-base", NULL);
-	if (lprop)
-		crashk_res.start = *lprop;
-
-	lprop = (u64 *)of_get_flat_dt_prop(node,
-				"linux,crashkernel-size", NULL);
-	if (lprop)
-		crashk_res.end = crashk_res.start + *lprop - 1;
-#endif
-
-	early_init_dt_check_for_initrd(node);
-
-	/* Retreive command line */
-	p = of_get_flat_dt_prop(node, "bootargs", &l);
-	if (p != NULL && l > 0)
-		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
-
-#ifdef CONFIG_CMDLINE
-#ifndef CONFIG_CMDLINE_FORCE
-	if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
-#endif
-		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif /* CONFIG_CMDLINE */
-
-	pr_debug("Command line is: %s\n", cmd_line);
-
-	/* break now */
-	return 1;
-}
-
-static int __init early_init_dt_scan_root(unsigned long node,
-				const char *uname, int depth, void *data)
-{
-	u32 *prop;
-
-	if (depth != 0)
-		return 0;
-
-	prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
-	dt_root_size_cells = (prop == NULL) ? 1 : *prop;
-	pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells);
-
-	prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
-	dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
-	pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells);
-
-	/* break now */
-	return 1;
-}
-
-static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
-{
-	cell_t *p = *cellp;
-
-	*cellp = p + s;
-	return of_read_number(p, s);
-}
-
-static int __init early_init_dt_scan_memory(unsigned long node,
-				const char *uname, int depth, void *data)
-{
-	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	cell_t *reg, *endp;
-	unsigned long l;
-
-	/* Look for the ibm,dynamic-reconfiguration-memory node */
-/*	if (depth == 1 &&
-		strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
-		return early_init_dt_scan_drconf_memory(node);
-*/
-	/* We are scanning "memory" nodes only */
-	if (type == NULL) {
-		/*
-		 * The longtrail doesn't have a device_type on the
-		 * /memory node, so look for the node called /memory@0.
-		 */
-		if (depth != 1 || strcmp(uname, "memory@0") != 0)
-			return 0;
-	} else if (strcmp(type, "memory") != 0)
-		return 0;
-
-	reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l);
-	if (reg == NULL)
-		reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
-	if (reg == NULL)
-		return 0;
-
-	endp = reg + (l / sizeof(cell_t));
-
-	pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
-		uname, l, reg[0], reg[1], reg[2], reg[3]);
-
-	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
-		u64 base, size;
-
-		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
-		size = dt_mem_next_cell(dt_root_size_cells, &reg);
-
-		if (size == 0)
-			continue;
-		pr_debug(" - %llx ,  %llx\n", (unsigned long long)base,
-			(unsigned long long)size);
-
-		lmb_add(base, size);
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PHYP_DUMP
-/**
- * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
- *
- * Function to find the largest size we need to reserve
- * during early boot process.
- *
- * It either looks for boot param and returns that OR
- * returns larger of 256 or 5% rounded down to multiples of 256MB.
- *
- */
-static inline unsigned long phyp_dump_calculate_reserve_size(void)
-{
-	unsigned long tmp;
-
-	if (phyp_dump_info->reserve_bootvar)
-		return phyp_dump_info->reserve_bootvar;
-
-	/* divide by 20 to get 5% of value */
-	tmp = lmb_end_of_DRAM();
-	do_div(tmp, 20);
-
-	/* round it down in multiples of 256 */
-	tmp = tmp & ~0x0FFFFFFFUL;
-
-	return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
-}
-
-/**
- * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
- *
- * This routine may reserve memory regions in the kernel only
- * if the system is supported and a dump was taken in last
- * boot instance or if the hardware is supported and the
- * scratch area needs to be setup. In other instances it returns
- * without reserving anything. The memory in case of dump being
- * active is freed when the dump is collected (by userland tools).
- */
-static void __init phyp_dump_reserve_mem(void)
-{
-	unsigned long base, size;
-	unsigned long variable_reserve_size;
-
-	if (!phyp_dump_info->phyp_dump_configured) {
-		printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
-		return;
-	}
-
-	if (!phyp_dump_info->phyp_dump_at_boot) {
-		printk(KERN_INFO "Phyp-dump disabled at boot time\n");
-		return;
-	}
-
-	variable_reserve_size = phyp_dump_calculate_reserve_size();
-
-	if (phyp_dump_info->phyp_dump_is_active) {
-		/* Reserve *everything* above RMR.Area freed by userland tools*/
-		base = variable_reserve_size;
-		size = lmb_end_of_DRAM() - base;
-
-		/* XXX crashed_ram_end is wrong, since it may be beyond
-		 * the memory_limit, it will need to be adjusted. */
-		lmb_reserve(base, size);
-
-		phyp_dump_info->init_reserve_start = base;
-		phyp_dump_info->init_reserve_size = size;
-	} else {
-		size = phyp_dump_info->cpu_state_size +
-			phyp_dump_info->hpte_region_size +
-			variable_reserve_size;
-		base = lmb_end_of_DRAM() - size;
-		lmb_reserve(base, size);
-		phyp_dump_info->init_reserve_start = base;
-		phyp_dump_info->init_reserve_size = size;
-	}
-}
-#else
-static inline void __init phyp_dump_reserve_mem(void) {}
-#endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
-
 #ifdef CONFIG_EARLY_PRINTK
 /* MS this is Microblaze specifig function */
 static int __init early_init_dt_scan_serial(unsigned long node,
@@ -775,11 +98,6 @@
 	/* Setup flat device-tree pointer */
 	initial_boot_params = params;
 
-#ifdef CONFIG_PHYP_DUMP
-	/* scan tree to see if dump occured during last boot */
-	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
-#endif
-
 	/* Retrieve various informations from the /chosen node of the
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
@@ -799,33 +117,18 @@
 
 	pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
 
-	pr_debug("Scanning CPUs ...\n");
-
-	/* Retreive CPU related informations from the flat tree
-	 * (altivec support, boot CPU ID, ...)
-	 */
-	of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
-
 	pr_debug(" <- early_init_devtree()\n");
 }
 
-/**
- * Indicates whether the root node has a given value in its
- * compatible property.
- */
-int machine_is_compatible(const char *compat)
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+		unsigned long end)
 {
-	struct device_node *root;
-	int rc = 0;
-
-	root = of_find_node_by_path("/");
-	if (root) {
-		rc = of_device_is_compatible(root, compat);
-		of_node_put(root);
-	}
-	return rc;
+	initrd_start = (unsigned long)__va(start);
+	initrd_end = (unsigned long)__va(end);
+	initrd_below_start_ok = 1;
 }
-EXPORT_SYMBOL(machine_is_compatible);
+#endif
 
 /*******
  *
@@ -838,273 +141,6 @@
  *
  *******/
 
-/**
- *	of_find_node_by_phandle - Find a node given a phandle
- *	@handle:	phandle of the node to find
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
-	struct device_node *np;
-
-	read_lock(&devtree_lock);
-	for (np = allnodes; np != NULL; np = np->allnext)
-		if (np->linux_phandle == handle)
-			break;
-	of_node_get(np);
-	read_unlock(&devtree_lock);
-	return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
-/**
- *	of_node_get - Increment refcount of a node
- *	@node:	Node to inc refcount, NULL is supported to
- *		simplify writing of callers
- *
- *	Returns node.
- */
-struct device_node *of_node_get(struct device_node *node)
-{
-	if (node)
-		kref_get(&node->kref);
-	return node;
-}
-EXPORT_SYMBOL(of_node_get);
-
-static inline struct device_node *kref_to_device_node(struct kref *kref)
-{
-	return container_of(kref, struct device_node, kref);
-}
-
-/**
- *	of_node_release - release a dynamically allocated node
- *	@kref:  kref element of the node to be released
- *
- *	In of_node_put() this function is passed to kref_put()
- *	as the destructor.
- */
-static void of_node_release(struct kref *kref)
-{
-	struct device_node *node = kref_to_device_node(kref);
-	struct property *prop = node->properties;
-
-	/* We should never be releasing nodes that haven't been detached. */
-	if (!of_node_check_flag(node, OF_DETACHED)) {
-		printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n",
-			node->full_name);
-		dump_stack();
-		kref_init(&node->kref);
-		return;
-	}
-
-	if (!of_node_check_flag(node, OF_DYNAMIC))
-		return;
-
-	while (prop) {
-		struct property *next = prop->next;
-		kfree(prop->name);
-		kfree(prop->value);
-		kfree(prop);
-		prop = next;
-
-		if (!prop) {
-			prop = node->deadprops;
-			node->deadprops = NULL;
-		}
-	}
-	kfree(node->full_name);
-	kfree(node->data);
-	kfree(node);
-}
-
-/**
- *	of_node_put - Decrement refcount of a node
- *	@node:	Node to dec refcount, NULL is supported to
- *		simplify writing of callers
- *
- */
-void of_node_put(struct device_node *node)
-{
-	if (node)
-		kref_put(&node->kref, of_node_release);
-}
-EXPORT_SYMBOL(of_node_put);
-
-/*
- * Plug a device node into the tree and global list.
- */
-void of_attach_node(struct device_node *np)
-{
-	unsigned long flags;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	np->sibling = np->parent->child;
-	np->allnext = allnodes;
-	np->parent->child = np;
-	allnodes = np;
-	write_unlock_irqrestore(&devtree_lock, flags);
-}
-
-/*
- * "Unplug" a node from the device tree.  The caller must hold
- * a reference to the node.  The memory associated with the node
- * is not freed until its refcount goes to zero.
- */
-void of_detach_node(struct device_node *np)
-{
-	struct device_node *parent;
-	unsigned long flags;
-
-	write_lock_irqsave(&devtree_lock, flags);
-
-	parent = np->parent;
-	if (!parent)
-		goto out_unlock;
-
-	if (allnodes == np)
-		allnodes = np->allnext;
-	else {
-		struct device_node *prev;
-		for (prev = allnodes;
-		     prev->allnext != np;
-		     prev = prev->allnext)
-			;
-		prev->allnext = np->allnext;
-	}
-
-	if (parent->child == np)
-		parent->child = np->sibling;
-	else {
-		struct device_node *prevsib;
-		for (prevsib = np->parent->child;
-		     prevsib->sibling != np;
-		     prevsib = prevsib->sibling)
-			;
-		prevsib->sibling = np->sibling;
-	}
-
-	of_node_set_flag(np, OF_DETACHED);
-
-out_unlock:
-	write_unlock_irqrestore(&devtree_lock, flags);
-}
-
-/*
- * Add a property to a node
- */
-int prom_add_property(struct device_node *np, struct property *prop)
-{
-	struct property **next;
-	unsigned long flags;
-
-	prop->next = NULL;
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (strcmp(prop->name, (*next)->name) == 0) {
-			/* duplicate ! don't insert it */
-			write_unlock_irqrestore(&devtree_lock, flags);
-			return -1;
-		}
-		next = &(*next)->next;
-	}
-	*next = prop;
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to add to proc as well if it was initialized */
-	if (np->pde)
-		proc_device_tree_add_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-/*
- * Remove a property from a node.  Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property.  Instead we just move the property
- * to the "dead properties" list, so it won't be found any more.
- */
-int prom_remove_property(struct device_node *np, struct property *prop)
-{
-	struct property **next;
-	unsigned long flags;
-	int found = 0;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (*next == prop) {
-			/* found the node */
-			*next = prop->next;
-			prop->next = np->deadprops;
-			np->deadprops = prop;
-			found = 1;
-			break;
-		}
-		next = &(*next)->next;
-	}
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-	if (!found)
-		return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to remove the proc node as well */
-	if (np->pde)
-		proc_device_tree_remove_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-/*
- * Update a property in a node.  Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property.  Instead we just move the property
- * to the "dead properties" list, and add the new property to the
- * property list
- */
-int prom_update_property(struct device_node *np,
-			 struct property *newprop,
-			 struct property *oldprop)
-{
-	struct property **next;
-	unsigned long flags;
-	int found = 0;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (*next == oldprop) {
-			/* found the node */
-			newprop->next = oldprop->next;
-			*next = newprop;
-			oldprop->next = np->deadprops;
-			np->deadprops = oldprop;
-			found = 1;
-			break;
-		}
-		next = &(*next)->next;
-	}
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-	if (!found)
-		return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to add to proc as well if it was initialized */
-	if (np->pde)
-		proc_device_tree_update_prop(np->pde, newprop, oldprop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
 #if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
 static struct debugfs_blob_wrapper flat_dt_blob;
 
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index c51405e..29d3cbf 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -141,6 +141,14 @@
 			break;
 	}
 
+	/* Ignoring the last page when ddr size is 128M. Cached
+	 * accesses to last page is causing the processor to prefetch
+	 * using address above 128M stepping out of the ddr address
+	 * space.
+	 */
+	if (mem == 0x8000000)
+		mem -= 0x1000;
+
 	add_memory_region(0, mem, BOOT_MEM_RAM);
 }
 
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index e274fda..127d732 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,5 +1,6 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 9a11c22..f87f5e1 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -49,8 +49,8 @@
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 		       resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
@@ -73,7 +73,7 @@
 			start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
 	}
 
-	res->start = start;
+	return start;
 }
 
 static void __devinit pcibios_scanbus(struct pci_controller *hose)
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index 678388f..fd22597 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -345,14 +345,13 @@
         return pcibios_enable_resources(dev);
 }
 
-void pcibios_align_resource(void *data, struct resource *res,
-                            resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
         struct pci_dev *dev = data;
+	resource_size_t start = res->start;
 
         if (res->flags & IORESOURCE_IO) {
-                resource_size_t start = res->start;
-
                 /* We need to avoid collisions with `mirrored' VGA ports
                    and other strange ISA hardware, so we always want the
                    addresses kilobyte aligned.  */
@@ -363,8 +362,9 @@
                 }
 
                 start = (start + 1024 - 1) & ~(1024 - 1);
-                res->start = start;
         }
+
+	return start;
 }
 
 struct pci_ops titan_pci_ops = {
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
index 78cd134..d6119b8 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.c
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -31,9 +31,11 @@
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
+	resource_size_t start = res->start;
+
 #if 0
 	struct pci_dev *dev = data;
 
@@ -47,14 +49,10 @@
 	       );
 #endif
 
-	if (res->flags & IORESOURCE_IO) {
-		unsigned long start = res->start;
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
 
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
+	return start;
 }
 
 
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
index 2cb7e75..6d8720a 100644
--- a/arch/mn10300/unit-asb2305/pci.c
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -331,12 +331,10 @@
 static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
 {
 	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
-	struct resource *devr = &dev->resource[idx];
+	struct resource *devr = &dev->resource[idx], *busr;
 
 	if (dev->bus) {
-		for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-			struct resource *busr = dev->bus->resource[i];
-
+		pci_bus_for_each_resource(dev->bus, busr, i) {
 			if (!busr || (busr->flags ^ devr->flags) & type_mask)
 				continue;
 
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 524d935..f388dc6 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -18,7 +18,6 @@
 	select BUG
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
-	select HAVE_ARCH_TRACEHOOK
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index f7064ab..38372e7 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -18,7 +18,6 @@
 
 #include <asm/io.h>
 #include <asm/system.h>
-#include <asm/cache.h>		/* for L1_CACHE_BYTES */
 #include <asm/superio.h>
 
 #define DEBUG_RESOURCES 0
@@ -123,6 +122,10 @@
 	} else {
 		printk(KERN_WARNING "pci_bios != NULL but init() is!\n");
 	}
+
+	/* Set the CLS for PCI as early as possible. */
+	pci_cache_line_size = pci_dfl_cache_line_size;
+
 	return 0;
 }
 
@@ -171,7 +174,7 @@
 	** upper byte is PCI_LATENCY_TIMER.
 	*/
 	pci_write_config_word(dev, PCI_CACHE_LINE_SIZE,
-				(0x80 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
+			      (0x80 << 8) | pci_cache_line_size);
 }
 
 
@@ -254,10 +257,10 @@
  * Since we are just checking candidates, don't use any fields other
  * than res->start.
  */
-void pcibios_align_resource(void *data, struct resource *res,
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t alignment)
 {
-	resource_size_t mask, align;
+	resource_size_t mask, align, start = res->start;
 
 	DBG_RES("pcibios_align_resource(%s, (%p) [%lx,%lx]/%x, 0x%lx, 0x%lx)\n",
 		pci_name(((struct pci_dev *) data)),
@@ -269,10 +272,10 @@
 
 	/* Align to largest of MIN or input size */
 	mask = max(alignment, align) - 1;
-	res->start += mask;
-	res->start &= ~mask;
+	start += mask;
+	start &= ~mask;
 
-	/* The caller updates the end field, we don't.  */
+	return start;
 }
 
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ba3948c..50c9af4 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -173,6 +173,7 @@
 
 config OF
 	def_bool y
+	select OF_FLATTREE
 
 config PPC_UDBG_16550
 	bool
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 2ab9cbd..ddd408a 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -23,21 +23,8 @@
 #include <asm/irq.h>
 #include <asm/atomic.h>
 
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	1
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
-
-#define of_compat_cmp(s1, s2, l)	strcasecmp((s1), (s2))
-#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
-#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
-
-extern struct device_node *of_chosen;
-
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-
 #ifdef CONFIG_PPC32
 /*
  * PCI <-> OF matching functions
@@ -52,11 +39,6 @@
 extern void pci_create_OF_bus_map(void);
 #endif
 
-extern struct resource *request_OF_resource(struct device_node* node,
-				int index, const char* name_postfix);
-extern int release_OF_resource(struct device_node* node, int index);
-
-
 /*
  * OF address retreival & translation
  */
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 1a4fc0d..666d08d 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -214,7 +214,7 @@
 static int of_dev_phandle_match(struct device *dev, void *data)
 {
 	phandle *ph = data;
-	return to_of_device(dev)->node->linux_phandle == *ph;
+	return to_of_device(dev)->node->phandle == *ph;
 }
 
 struct of_device *of_find_device_by_phandle(phandle ph)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index cadbed6..2597f95 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1047,10 +1047,8 @@
 
 	struct pci_dev *dev = bus->self;
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
-		if ((res = bus->resource[i]) == NULL)
-			continue;
-		if (!res->flags)
+	pci_bus_for_each_resource(bus, res, i) {
+		if (!res || !res->flags)
 			continue;
 		if (i >= 3 && bus->self->transparent)
 			continue;
@@ -1181,21 +1179,20 @@
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void pcibios_align_resource(void *data, struct resource *res,
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
 		if (skip_isa_ioresource_align(dev))
-			return;
-		if (start & 0x300) {
+			return start;
+		if (start & 0x300)
 			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
 	}
+
+	return start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
@@ -1278,9 +1275,8 @@
 	pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
 		 pci_domain_nr(bus), bus->number);
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
-		if ((res = bus->resource[i]) == NULL || !res->flags
-		    || res->start > res->end || res->parent)
+	pci_bus_for_each_resource(bus, res, i) {
+		if (!res || !res->flags || res->start > res->end || res->parent)
 			continue;
 		if (bus->parent == NULL)
 			pr = (res->flags & IORESOURCE_IO) ?
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ccf56ac..d43fc65 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -224,7 +224,7 @@
 	 * G5 machines... So when something asks for bus 0 io base
 	 * (bus 0 is HT root), we return the AGP one instead.
 	 */
-	if (in_bus == 0 && machine_is_compatible("MacRISC4")) {
+	if (in_bus == 0 && of_machine_is_compatible("MacRISC4")) {
 		struct device_node *agp;
 
 		agp = of_find_compatible_node(NULL, NULL, "u3-agp");
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4ec3008..43238b2 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -61,365 +61,12 @@
 #define DBG(fmt...)
 #endif
 
-
-static int __initdata dt_root_addr_cells;
-static int __initdata dt_root_size_cells;
-
 #ifdef CONFIG_PPC64
 int __initdata iommu_is_off;
 int __initdata iommu_force_on;
 unsigned long tce_alloc_start, tce_alloc_end;
 #endif
 
-typedef u32 cell_t;
-
-#if 0
-static struct boot_param_header *initial_boot_params __initdata;
-#else
-struct boot_param_header *initial_boot_params;
-#endif
-
-extern struct device_node *allnodes;	/* temporary while merging */
-
-extern rwlock_t devtree_lock;	/* temporary while merging */
-
-/* export that to outside world */
-struct device_node *of_chosen;
-
-static inline char *find_flat_dt_string(u32 offset)
-{
-	return ((char *)initial_boot_params) +
-		initial_boot_params->off_dt_strings + offset;
-}
-
-/**
- * This function is used to scan the flattened device-tree, it is
- * used to extract the memory informations at boot before we can
- * unflatten the tree
- */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
-				     const char *uname, int depth,
-				     void *data),
-			   void *data)
-{
-	unsigned long p = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	int rc = 0;
-	int depth = -1;
-
-	do {
-		u32 tag = *((u32 *)p);
-		char *pathp;
-		
-		p += 4;
-		if (tag == OF_DT_END_NODE) {
-			depth --;
-			continue;
-		}
-		if (tag == OF_DT_NOP)
-			continue;
-		if (tag == OF_DT_END)
-			break;
-		if (tag == OF_DT_PROP) {
-			u32 sz = *((u32 *)p);
-			p += 8;
-			if (initial_boot_params->version < 0x10)
-				p = _ALIGN(p, sz >= 8 ? 8 : 4);
-			p += sz;
-			p = _ALIGN(p, 4);
-			continue;
-		}
-		if (tag != OF_DT_BEGIN_NODE) {
-			printk(KERN_WARNING "Invalid tag %x scanning flattened"
-			       " device tree !\n", tag);
-			return -EINVAL;
-		}
-		depth++;
-		pathp = (char *)p;
-		p = _ALIGN(p + strlen(pathp) + 1, 4);
-		if ((*pathp) == '/') {
-			char *lp, *np;
-			for (lp = NULL, np = pathp; *np; np++)
-				if ((*np) == '/')
-					lp = np+1;
-			if (lp != NULL)
-				pathp = lp;
-		}
-		rc = it(p, pathp, depth, data);
-		if (rc != 0)
-			break;		
-	} while(1);
-
-	return rc;
-}
-
-unsigned long __init of_get_flat_dt_root(void)
-{
-	unsigned long p = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-
-	while(*((u32 *)p) == OF_DT_NOP)
-		p += 4;
-	BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE);
-	p += 4;
-	return _ALIGN(p + strlen((char *)p) + 1, 4);
-}
-
-/**
- * This  function can be used within scan_flattened_dt callback to get
- * access to properties
- */
-void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
-				 unsigned long *size)
-{
-	unsigned long p = node;
-
-	do {
-		u32 tag = *((u32 *)p);
-		u32 sz, noff;
-		const char *nstr;
-
-		p += 4;
-		if (tag == OF_DT_NOP)
-			continue;
-		if (tag != OF_DT_PROP)
-			return NULL;
-
-		sz = *((u32 *)p);
-		noff = *((u32 *)(p + 4));
-		p += 8;
-		if (initial_boot_params->version < 0x10)
-			p = _ALIGN(p, sz >= 8 ? 8 : 4);
-
-		nstr = find_flat_dt_string(noff);
-		if (nstr == NULL) {
-			printk(KERN_WARNING "Can't find property index"
-			       " name !\n");
-			return NULL;
-		}
-		if (strcmp(name, nstr) == 0) {
-			if (size)
-				*size = sz;
-			return (void *)p;
-		}
-		p += sz;
-		p = _ALIGN(p, 4);
-	} while(1);
-}
-
-int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
-{
-	const char* cp;
-	unsigned long cplen, l;
-
-	cp = of_get_flat_dt_prop(node, "compatible", &cplen);
-	if (cp == NULL)
-		return 0;
-	while (cplen > 0) {
-		if (strncasecmp(cp, compat, strlen(compat)) == 0)
-			return 1;
-		l = strlen(cp) + 1;
-		cp += l;
-		cplen -= l;
-	}
-
-	return 0;
-}
-
-static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
-				       unsigned long align)
-{
-	void *res;
-
-	*mem = _ALIGN(*mem, align);
-	res = (void *)*mem;
-	*mem += size;
-
-	return res;
-}
-
-static unsigned long __init unflatten_dt_node(unsigned long mem,
-					      unsigned long *p,
-					      struct device_node *dad,
-					      struct device_node ***allnextpp,
-					      unsigned long fpsize)
-{
-	struct device_node *np;
-	struct property *pp, **prev_pp = NULL;
-	char *pathp;
-	u32 tag;
-	unsigned int l, allocl;
-	int has_name = 0;
-	int new_format = 0;
-
-	tag = *((u32 *)(*p));
-	if (tag != OF_DT_BEGIN_NODE) {
-		printk("Weird tag at start of node: %x\n", tag);
-		return mem;
-	}
-	*p += 4;
-	pathp = (char *)*p;
-	l = allocl = strlen(pathp) + 1;
-	*p = _ALIGN(*p + l, 4);
-
-	/* version 0x10 has a more compact unit name here instead of the full
-	 * path. we accumulate the full path size using "fpsize", we'll rebuild
-	 * it later. We detect this because the first character of the name is
-	 * not '/'.
-	 */
-	if ((*pathp) != '/') {
-		new_format = 1;
-		if (fpsize == 0) {
-			/* root node: special case. fpsize accounts for path
-			 * plus terminating zero. root node only has '/', so
-			 * fpsize should be 2, but we want to avoid the first
-			 * level nodes to have two '/' so we use fpsize 1 here
-			 */
-			fpsize = 1;
-			allocl = 2;
-		} else {
-			/* account for '/' and path size minus terminal 0
-			 * already in 'l'
-			 */
-			fpsize += l;
-			allocl = fpsize;
-		}
-	}
-
-
-	np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
-				__alignof__(struct device_node));
-	if (allnextpp) {
-		memset(np, 0, sizeof(*np));
-		np->full_name = ((char*)np) + sizeof(struct device_node);
-		if (new_format) {
-			char *p = np->full_name;
-			/* rebuild full path for new format */
-			if (dad && dad->parent) {
-				strcpy(p, dad->full_name);
-#ifdef DEBUG
-				if ((strlen(p) + l + 1) != allocl) {
-					DBG("%s: p: %d, l: %d, a: %d\n",
-					    pathp, (int)strlen(p), l, allocl);
-				}
-#endif
-				p += strlen(p);
-			}
-			*(p++) = '/';
-			memcpy(p, pathp, l);
-		} else
-			memcpy(np->full_name, pathp, l);
-		prev_pp = &np->properties;
-		**allnextpp = np;
-		*allnextpp = &np->allnext;
-		if (dad != NULL) {
-			np->parent = dad;
-			/* we temporarily use the next field as `last_child'*/
-			if (dad->next == 0)
-				dad->child = np;
-			else
-				dad->next->sibling = np;
-			dad->next = np;
-		}
-		kref_init(&np->kref);
-	}
-	while(1) {
-		u32 sz, noff;
-		char *pname;
-
-		tag = *((u32 *)(*p));
-		if (tag == OF_DT_NOP) {
-			*p += 4;
-			continue;
-		}
-		if (tag != OF_DT_PROP)
-			break;
-		*p += 4;
-		sz = *((u32 *)(*p));
-		noff = *((u32 *)((*p) + 4));
-		*p += 8;
-		if (initial_boot_params->version < 0x10)
-			*p = _ALIGN(*p, sz >= 8 ? 8 : 4);
-
-		pname = find_flat_dt_string(noff);
-		if (pname == NULL) {
-			printk("Can't find property name in list !\n");
-			break;
-		}
-		if (strcmp(pname, "name") == 0)
-			has_name = 1;
-		l = strlen(pname) + 1;
-		pp = unflatten_dt_alloc(&mem, sizeof(struct property),
-					__alignof__(struct property));
-		if (allnextpp) {
-			if (strcmp(pname, "linux,phandle") == 0) {
-				np->node = *((u32 *)*p);
-				if (np->linux_phandle == 0)
-					np->linux_phandle = np->node;
-			}
-			if (strcmp(pname, "ibm,phandle") == 0)
-				np->linux_phandle = *((u32 *)*p);
-			pp->name = pname;
-			pp->length = sz;
-			pp->value = (void *)*p;
-			*prev_pp = pp;
-			prev_pp = &pp->next;
-		}
-		*p = _ALIGN((*p) + sz, 4);
-	}
-	/* with version 0x10 we may not have the name property, recreate
-	 * it here from the unit name if absent
-	 */
-	if (!has_name) {
-		char *p = pathp, *ps = pathp, *pa = NULL;
-		int sz;
-
-		while (*p) {
-			if ((*p) == '@')
-				pa = p;
-			if ((*p) == '/')
-				ps = p + 1;
-			p++;
-		}
-		if (pa < ps)
-			pa = p;
-		sz = (pa - ps) + 1;
-		pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
-					__alignof__(struct property));
-		if (allnextpp) {
-			pp->name = "name";
-			pp->length = sz;
-			pp->value = pp + 1;
-			*prev_pp = pp;
-			prev_pp = &pp->next;
-			memcpy(pp->value, ps, sz - 1);
-			((char *)pp->value)[sz - 1] = 0;
-			DBG("fixed up name for %s -> %s\n", pathp,
-				(char *)pp->value);
-		}
-	}
-	if (allnextpp) {
-		*prev_pp = NULL;
-		np->name = of_get_property(np, "name", NULL);
-		np->type = of_get_property(np, "device_type", NULL);
-
-		if (!np->name)
-			np->name = "<NULL>";
-		if (!np->type)
-			np->type = "<NULL>";
-	}
-	while (tag == OF_DT_BEGIN_NODE) {
-		mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
-		tag = *((u32 *)(*p));
-	}
-	if (tag != OF_DT_END_NODE) {
-		printk("Weird tag at end of node: %x\n", tag);
-		return mem;
-	}
-	*p += 4;
-	return mem;
-}
-
 static int __init early_parse_mem(char *p)
 {
 	if (!p)
@@ -446,7 +93,7 @@
 	DBG("-> move_device_tree\n");
 
 	start = __pa(initial_boot_params);
-	size = initial_boot_params->totalsize;
+	size = be32_to_cpu(initial_boot_params->totalsize);
 
 	if ((memory_limit && (start + size) > memory_limit) ||
 			overlaps_crashkernel(start, size)) {
@@ -459,54 +106,6 @@
 	DBG("<- move_device_tree\n");
 }
 
-/**
- * unflattens the device-tree passed by the firmware, creating the
- * tree of struct device_node. It also fills the "name" and "type"
- * pointers of the nodes so the normal device-tree walking functions
- * can be used (this used to be done by finish_device_tree)
- */
-void __init unflatten_device_tree(void)
-{
-	unsigned long start, mem, size;
-	struct device_node **allnextp = &allnodes;
-
-	DBG(" -> unflatten_device_tree()\n");
-
-	/* First pass, scan for size */
-	start = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	size = unflatten_dt_node(0, &start, NULL, NULL, 0);
-	size = (size | 3) + 1;
-
-	DBG("  size is %lx, allocating...\n", size);
-
-	/* Allocate memory for the expanded device tree */
-	mem = lmb_alloc(size + 4, __alignof__(struct device_node));
-	mem = (unsigned long) __va(mem);
-
-	((u32 *)mem)[size / 4] = 0xdeadbeef;
-
-	DBG("  unflattening %lx...\n", mem);
-
-	/* Second pass, do actual unflattening */
-	start = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
-	if (*((u32 *)start) != OF_DT_END)
-		printk(KERN_WARNING "Weird tag at end of tree: %08x\n", *((u32 *)start));
-	if (((u32 *)mem)[size / 4] != 0xdeadbeef)
-		printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
-		       ((u32 *)mem)[size / 4] );
-	*allnextp = NULL;
-
-	/* Get pointer to OF "/chosen" node for use everywhere */
-	of_chosen = of_find_node_by_path("/chosen");
-	if (of_chosen == NULL)
-		of_chosen = of_find_node_by_path("/chosen@0");
-
-	DBG(" <- unflatten_device_tree()\n");
-}
-
 /*
  * ibm,pa-features is a per-cpu property that contains a string of
  * attribute descriptors, each of which has a 2 byte header plus up
@@ -763,48 +362,9 @@
 	return 0;
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-static void __init early_init_dt_check_for_initrd(unsigned long node)
-{
-	unsigned long l;
-	u32 *prop;
-
-	DBG("Looking for initrd properties... ");
-
-	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
-	if (prop) {
-		initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
-
-		prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
-		if (prop) {
-			initrd_end = (unsigned long)
-					__va(of_read_ulong(prop, l/4));
-			initrd_below_start_ok = 1;
-		} else {
-			initrd_start = 0;
-		}
-	}
-
-	DBG("initrd_start=0x%lx  initrd_end=0x%lx\n", initrd_start, initrd_end);
-}
-#else
-static inline void early_init_dt_check_for_initrd(unsigned long node)
-{
-}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-static int __init early_init_dt_scan_chosen(unsigned long node,
-					    const char *uname, int depth, void *data)
+void __init early_init_dt_scan_chosen_arch(unsigned long node)
 {
 	unsigned long *lprop;
-	unsigned long l;
-	char *p;
-
-	DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
-
-	if (depth != 1 ||
-	    (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
-		return 0;
 
 #ifdef CONFIG_PPC64
 	/* check if iommu is forced on or off */
@@ -815,17 +375,17 @@
 #endif
 
 	/* mem=x on the command line is the preferred mechanism */
- 	lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
- 	if (lprop)
- 		memory_limit = *lprop;
+	lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
+	if (lprop)
+		memory_limit = *lprop;
 
 #ifdef CONFIG_PPC64
- 	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
- 	if (lprop)
- 		tce_alloc_start = *lprop;
- 	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
- 	if (lprop)
- 		tce_alloc_end = *lprop;
+	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
+	if (lprop)
+		tce_alloc_start = *lprop;
+	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
+	if (lprop)
+		tce_alloc_end = *lprop;
 #endif
 
 #ifdef CONFIG_KEXEC
@@ -837,51 +397,6 @@
 	if (lprop)
 		crashk_res.end = crashk_res.start + *lprop - 1;
 #endif
-
-	early_init_dt_check_for_initrd(node);
-
-	/* Retreive command line */
- 	p = of_get_flat_dt_prop(node, "bootargs", &l);
-	if (p != NULL && l > 0)
-		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
-
-#ifdef CONFIG_CMDLINE
-	if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
-		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif /* CONFIG_CMDLINE */
-
-	DBG("Command line is: %s\n", cmd_line);
-
-	/* break now */
-	return 1;
-}
-
-static int __init early_init_dt_scan_root(unsigned long node,
-					  const char *uname, int depth, void *data)
-{
-	u32 *prop;
-
-	if (depth != 0)
-		return 0;
-
-	prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
-	dt_root_size_cells = (prop == NULL) ? 1 : *prop;
-	DBG("dt_root_size_cells = %x\n", dt_root_size_cells);
-
-	prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
-	dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
-	DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells);
-	
-	/* break now */
-	return 1;
-}
-
-static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
-{
-	cell_t *p = *cellp;
-
-	*cellp = p + s;
-	return of_read_number(p, s);
 }
 
 #ifdef CONFIG_PPC_PSERIES
@@ -893,22 +408,22 @@
  */
 static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 {
-	cell_t *dm, *ls, *usm;
+	__be32 *dm, *ls, *usm;
 	unsigned long l, n, flags;
 	u64 base, size, lmb_size;
 	unsigned int is_kexec_kdump = 0, rngs;
 
 	ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
-	if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
+	if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
 		return 0;
 	lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
 
 	dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
-	if (dm == NULL || l < sizeof(cell_t))
+	if (dm == NULL || l < sizeof(__be32))
 		return 0;
 
 	n = *dm++;	/* number of entries */
-	if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t))
+	if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
 		return 0;
 
 	/* check if this is a kexec/kdump kernel. */
@@ -963,66 +478,48 @@
 #define early_init_dt_scan_drconf_memory(node)	0
 #endif /* CONFIG_PPC_PSERIES */
 
-static int __init early_init_dt_scan_memory(unsigned long node,
-					    const char *uname, int depth, void *data)
+static int __init early_init_dt_scan_memory_ppc(unsigned long node,
+						const char *uname,
+						int depth, void *data)
 {
-	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	cell_t *reg, *endp;
-	unsigned long l;
-
-	/* Look for the ibm,dynamic-reconfiguration-memory node */
 	if (depth == 1 &&
 	    strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
 		return early_init_dt_scan_drconf_memory(node);
-
-	/* We are scanning "memory" nodes only */
-	if (type == NULL) {
-		/*
-		 * The longtrail doesn't have a device_type on the
-		 * /memory node, so look for the node called /memory@0.
-		 */
-		if (depth != 1 || strcmp(uname, "memory@0") != 0)
-			return 0;
-	} else if (strcmp(type, "memory") != 0)
-		return 0;
-
-	reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
-	if (reg == NULL)
-		reg = of_get_flat_dt_prop(node, "reg", &l);
-	if (reg == NULL)
-		return 0;
-
-	endp = reg + (l / sizeof(cell_t));
-
-	DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
-	    uname, l, reg[0], reg[1], reg[2], reg[3]);
-
-	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
-		u64 base, size;
-
-		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
-		size = dt_mem_next_cell(dt_root_size_cells, &reg);
-
-		if (size == 0)
-			continue;
-		DBG(" - %llx ,  %llx\n", (unsigned long long)base,
-		    (unsigned long long)size);
-#ifdef CONFIG_PPC64
-		if (iommu_is_off) {
-			if (base >= 0x80000000ul)
-				continue;
-			if ((base + size) > 0x80000000ul)
-				size = 0x80000000ul - base;
-		}
-#endif
-		lmb_add(base, size);
-
-		memstart_addr = min((u64)memstart_addr, base);
-	}
-
-	return 0;
+	
+	return early_init_dt_scan_memory(node, uname, depth, data);
 }
 
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+#if defined(CONFIG_PPC64)
+	if (iommu_is_off) {
+		if (base >= 0x80000000ul)
+			return;
+		if ((base + size) > 0x80000000ul)
+			size = 0x80000000ul - base;
+	}
+#endif
+
+	lmb_add(base, size);
+
+	memstart_addr = min((u64)memstart_addr, base);
+}
+
+u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+	return lmb_alloc(size, align);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+		unsigned long end)
+{
+	initrd_start = (unsigned long)__va(start);
+	initrd_end = (unsigned long)__va(end);
+	initrd_below_start_ok = 1;
+}
+#endif
+
 static void __init early_reserve_mem(void)
 {
 	u64 base, size;
@@ -1186,7 +683,7 @@
 	/* Scan memory nodes and rebuild LMBs */
 	lmb_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
 
 	/* Save command line for /proc/cmdline and then parse parameters */
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
@@ -1234,25 +731,6 @@
 	DBG(" <- early_init_devtree()\n");
 }
 
-
-/**
- * Indicates whether the root node has a given value in its
- * compatible property.
- */
-int machine_is_compatible(const char *compat)
-{
-	struct device_node *root;
-	int rc = 0;
-
-	root = of_find_node_by_path("/");
-	if (root) {
-		rc = of_device_is_compatible(root, compat);
-		of_node_put(root);
-	}
-	return rc;
-}
-EXPORT_SYMBOL(machine_is_compatible);
-
 /*******
  *
  * New implementation of the OF "find" APIs, return a refcounted
@@ -1265,27 +743,6 @@
  *******/
 
 /**
- *	of_find_node_by_phandle - Find a node given a phandle
- *	@handle:	phandle of the node to find
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
-	struct device_node *np;
-
-	read_lock(&devtree_lock);
-	for (np = allnodes; np != 0; np = np->allnext)
-		if (np->linux_phandle == handle)
-			break;
-	of_node_get(np);
-	read_unlock(&devtree_lock);
-	return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
-/**
  *	of_find_next_cache_node - Find a node's subsidiary cache
  *	@np:	node of type "cpu" or "cache"
  *
@@ -1316,138 +773,6 @@
 	return NULL;
 }
 
-/**
- *	of_node_get - Increment refcount of a node
- *	@node:	Node to inc refcount, NULL is supported to
- *		simplify writing of callers
- *
- *	Returns node.
- */
-struct device_node *of_node_get(struct device_node *node)
-{
-	if (node)
-		kref_get(&node->kref);
-	return node;
-}
-EXPORT_SYMBOL(of_node_get);
-
-static inline struct device_node * kref_to_device_node(struct kref *kref)
-{
-	return container_of(kref, struct device_node, kref);
-}
-
-/**
- *	of_node_release - release a dynamically allocated node
- *	@kref:  kref element of the node to be released
- *
- *	In of_node_put() this function is passed to kref_put()
- *	as the destructor.
- */
-static void of_node_release(struct kref *kref)
-{
-	struct device_node *node = kref_to_device_node(kref);
-	struct property *prop = node->properties;
-
-	/* We should never be releasing nodes that haven't been detached. */
-	if (!of_node_check_flag(node, OF_DETACHED)) {
-		printk("WARNING: Bad of_node_put() on %s\n", node->full_name);
-		dump_stack();
-		kref_init(&node->kref);
-		return;
-	}
-
-	if (!of_node_check_flag(node, OF_DYNAMIC))
-		return;
-
-	while (prop) {
-		struct property *next = prop->next;
-		kfree(prop->name);
-		kfree(prop->value);
-		kfree(prop);
-		prop = next;
-
-		if (!prop) {
-			prop = node->deadprops;
-			node->deadprops = NULL;
-		}
-	}
-	kfree(node->full_name);
-	kfree(node->data);
-	kfree(node);
-}
-
-/**
- *	of_node_put - Decrement refcount of a node
- *	@node:	Node to dec refcount, NULL is supported to
- *		simplify writing of callers
- *
- */
-void of_node_put(struct device_node *node)
-{
-	if (node)
-		kref_put(&node->kref, of_node_release);
-}
-EXPORT_SYMBOL(of_node_put);
-
-/*
- * Plug a device node into the tree and global list.
- */
-void of_attach_node(struct device_node *np)
-{
-	unsigned long flags;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	np->sibling = np->parent->child;
-	np->allnext = allnodes;
-	np->parent->child = np;
-	allnodes = np;
-	write_unlock_irqrestore(&devtree_lock, flags);
-}
-
-/*
- * "Unplug" a node from the device tree.  The caller must hold
- * a reference to the node.  The memory associated with the node
- * is not freed until its refcount goes to zero.
- */
-void of_detach_node(struct device_node *np)
-{
-	struct device_node *parent;
-	unsigned long flags;
-
-	write_lock_irqsave(&devtree_lock, flags);
-
-	parent = np->parent;
-	if (!parent)
-		goto out_unlock;
-
-	if (allnodes == np)
-		allnodes = np->allnext;
-	else {
-		struct device_node *prev;
-		for (prev = allnodes;
-		     prev->allnext != np;
-		     prev = prev->allnext)
-			;
-		prev->allnext = np->allnext;
-	}
-
-	if (parent->child == np)
-		parent->child = np->sibling;
-	else {
-		struct device_node *prevsib;
-		for (prevsib = np->parent->child;
-		     prevsib->sibling != np;
-		     prevsib = prevsib->sibling)
-			;
-		prevsib->sibling = np->sibling;
-	}
-
-	of_node_set_flag(np, OF_DETACHED);
-
-out_unlock:
-	write_unlock_irqrestore(&devtree_lock, flags);
-}
-
 #ifdef CONFIG_PPC_PSERIES
 /*
  * Fix up the uninitialized fields in a new device node:
@@ -1479,9 +804,9 @@
 	if (machine_is(powermac))
 		return -ENODEV;
 
-	/* fix up new node's linux_phandle field */
+	/* fix up new node's phandle field */
 	if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL)))
-		node->linux_phandle = *ibm_phandle;
+		node->phandle = *ibm_phandle;
 
 out:
 	of_node_put(parent);
@@ -1520,120 +845,6 @@
 __initcall(prom_reconfig_setup);
 #endif
 
-/*
- * Add a property to a node
- */
-int prom_add_property(struct device_node* np, struct property* prop)
-{
-	struct property **next;
-	unsigned long flags;
-
-	prop->next = NULL;	
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (strcmp(prop->name, (*next)->name) == 0) {
-			/* duplicate ! don't insert it */
-			write_unlock_irqrestore(&devtree_lock, flags);
-			return -1;
-		}
-		next = &(*next)->next;
-	}
-	*next = prop;
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to add to proc as well if it was initialized */
-	if (np->pde)
-		proc_device_tree_add_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-/*
- * Remove a property from a node.  Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property.  Instead we just move the property
- * to the "dead properties" list, so it won't be found any more.
- */
-int prom_remove_property(struct device_node *np, struct property *prop)
-{
-	struct property **next;
-	unsigned long flags;
-	int found = 0;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (*next == prop) {
-			/* found the node */
-			*next = prop->next;
-			prop->next = np->deadprops;
-			np->deadprops = prop;
-			found = 1;
-			break;
-		}
-		next = &(*next)->next;
-	}
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-	if (!found)
-		return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to remove the proc node as well */
-	if (np->pde)
-		proc_device_tree_remove_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-/*
- * Update a property in a node.  Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property.  Instead we just move the property
- * to the "dead properties" list, and add the new property to the
- * property list
- */
-int prom_update_property(struct device_node *np,
-			 struct property *newprop,
-			 struct property *oldprop)
-{
-	struct property **next;
-	unsigned long flags;
-	int found = 0;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (*next == oldprop) {
-			/* found the node */
-			newprop->next = oldprop->next;
-			*next = newprop;
-			oldprop->next = np->deadprops;
-			np->deadprops = oldprop;
-			found = 1;
-			break;
-		}
-		next = &(*next)->next;
-	}
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-	if (!found)
-		return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to add to proc as well if it was initialized */
-	if (np->pde)
-		proc_device_tree_update_prop(np->pde, newprop, oldprop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-
 /* Find the device node for a given logical cpu number, also returns the cpu
  * local thread number (index in ibm,interrupt-server#s) if relevant and
  * asked for (non NULL)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 21f61b8..cc29c0f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -338,7 +338,8 @@
 	}
 
 	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+			MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 	of_node_put(np);
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 04160a4..a15f582 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -46,6 +46,7 @@
 	__iomem u32 *bptr_vaddr;
 	struct device_node *np;
 	int n = 0;
+	int ioremappable;
 
 	WARN_ON (nr < 0 || nr >= NR_CPUS);
 
@@ -59,21 +60,37 @@
 		return;
 	}
 
+	/*
+	 * A secondary core could be in a spinloop in the bootpage
+	 * (0xfffff000), somewhere in highmem, or somewhere in lowmem.
+	 * The bootpage and highmem can be accessed via ioremap(), but
+	 * we need to directly access the spinloop if its in lowmem.
+	 */
+	ioremappable = *cpu_rel_addr > virt_to_phys(high_memory);
+
 	/* Map the spin table */
-	bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+	if (ioremappable)
+		bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+	else
+		bptr_vaddr = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
 
 	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
+	if (!ioremappable)
+		flush_dcache_range((ulong)bptr_vaddr,
+				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+
 	/* Wait a bit for the CPU to ack. */
 	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
 		mdelay(1);
 
 	local_irq_restore(flags);
 
-	iounmap(bptr_vaddr);
+	if (ioremappable)
+		iounmap(bptr_vaddr);
 
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index 1b42605..0125604 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -80,8 +80,8 @@
 	printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
 
 	ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I;
-	if (machine_is_compatible("MPC8540") ||
-	    machine_is_compatible("MPC8560"))
+	if (of_machine_is_compatible("MPC8540") ||
+	    of_machine_is_compatible("MPC8560"))
 		/*
 		 * Assume L2 SRAM is used fully for cache, so set
 		 * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3).
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
index dcddaa5..f75a4da 100644
--- a/arch/powerpc/platforms/cell/cbe_powerbutton.c
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -48,7 +48,7 @@
 	int ret = 0;
 	struct input_dev *dev;
 
-	if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+	if (!of_machine_is_compatible("IBM,CBPLUS-1.0")) {
 		printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
 		ret = -ENODEV;
 		goto out;
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 5e0a191..608fd2b 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -255,7 +255,7 @@
 {
 	struct cbe_pmd_regs __iomem *regs;
 
-	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+	sysreset_hack = of_machine_is_compatible("IBM,CBPLUS-1.0");
 	if (!sysreset_hack)
 		return 0;
 
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index 4c506c1..891f18e 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -457,7 +457,7 @@
 			continue;
 		vic_handles = of_get_property(spu_dn, "vicinity", &lenp);
 		for (i=0; i < (lenp / sizeof(phandle)); i++) {
-			if (vic_handles[i] == target->linux_phandle)
+			if (vic_handles[i] == target->phandle)
 				return spu;
 		}
 	}
@@ -499,7 +499,7 @@
 
 			if (strcmp(name, "spe") == 0) {
 				spu = devnode_spu(cbe, vic_dn);
-				avoid_ph = last_spu_dn->linux_phandle;
+				avoid_ph = last_spu_dn->phandle;
 			} else {
 				/*
 				 * "mic-tm" and "bif0" nodes do not have
@@ -514,7 +514,7 @@
 					last_spu->has_mem_affinity = 1;
 					spu->has_mem_affinity = 1;
 				}
-				avoid_ph = vic_dn->linux_phandle;
+				avoid_ph = vic_dn->phandle;
 			}
 
 			list_add_tail(&spu->aff_list, &last_spu->aff_list);
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index fd23a1d..8b0c208 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -222,6 +222,7 @@
 	int i;
 	u8 *dummy;
 	struct pci_bus *bus = dev->bus;
+	struct resource *res;
 	resource_size_t end = 0;
 
 	for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) {
@@ -230,13 +231,12 @@
 			end = pci_resource_end(dev, i);
 	}
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		if ((bus->resource[i]) &&
-			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			if (bus->resource[i]->end == end)
-				dummy = ioremap(bus->resource[i]->start, 0x4);
+	pci_bus_for_each_resource(bus, res, i) {
+		if (res && res->flags & IORESOURCE_MEM) {
+			if (res->end == end)
+				dummy = ioremap(res->start, 0x4);
 			else
-				dummy = ioremap(bus->resource[i]->end - 3, 0x4);
+				dummy = ioremap(res->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index be2527a..d35e052 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -304,8 +304,8 @@
 
 static int __init pas_cpufreq_init(void)
 {
-	if (!machine_is_compatible("PA6T-1682M") &&
-	    !machine_is_compatible("pasemi,pwrficient"))
+	if (!of_machine_is_compatible("PA6T-1682M") &&
+	    !of_machine_is_compatible("pasemi,pwrficient"))
 		return -ENODEV;
 
 	return cpufreq_register_driver(&pas_cpufreq_driver);
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 08d94e4..d4f127d 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -657,31 +657,31 @@
 	cur_freq = (*value) / 1000;
 
 	/*  Check for 7447A based MacRISC3 */
-	if (machine_is_compatible("MacRISC3") &&
+	if (of_machine_is_compatible("MacRISC3") &&
 	    of_get_property(cpunode, "dynamic-power-step", NULL) &&
 	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
 		pmac_cpufreq_init_7447A(cpunode);
 	/* Check for other MacRISC3 machines */
-	} else if (machine_is_compatible("PowerBook3,4") ||
-		   machine_is_compatible("PowerBook3,5") ||
-		   machine_is_compatible("MacRISC3")) {
+	} else if (of_machine_is_compatible("PowerBook3,4") ||
+		   of_machine_is_compatible("PowerBook3,5") ||
+		   of_machine_is_compatible("MacRISC3")) {
 		pmac_cpufreq_init_MacRISC3(cpunode);
 	/* Else check for iBook2 500/600 */
-	} else if (machine_is_compatible("PowerBook4,1")) {
+	} else if (of_machine_is_compatible("PowerBook4,1")) {
 		hi_freq = cur_freq;
 		low_freq = 400000;
 		set_speed_proc = pmu_set_cpu_speed;
 		is_pmu_based = 1;
 	}
 	/* Else check for TiPb 550 */
-	else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+	else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
 		hi_freq = cur_freq;
 		low_freq = 500000;
 		set_speed_proc = pmu_set_cpu_speed;
 		is_pmu_based = 1;
 	}
 	/* Else check for TiPb 400 & 500 */
-	else if (machine_is_compatible("PowerBook3,2")) {
+	else if (of_machine_is_compatible("PowerBook3,2")) {
 		/* We only know about the 400 MHz and the 500Mhz model
 		 * they both have 300 MHz as low frequency
 		 */
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 708c751..3ed288e 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -398,11 +398,11 @@
 	int rc = -ENODEV;
 
 	/* Check supported platforms */
-	if (machine_is_compatible("PowerMac8,1") ||
-	    machine_is_compatible("PowerMac8,2") ||
-	    machine_is_compatible("PowerMac9,1"))
+	if (of_machine_is_compatible("PowerMac8,1") ||
+	    of_machine_is_compatible("PowerMac8,2") ||
+	    of_machine_is_compatible("PowerMac9,1"))
 		use_volts_smu = 1;
-	else if (machine_is_compatible("PowerMac11,2"))
+	else if (of_machine_is_compatible("PowerMac11,2"))
 		use_volts_vdnap = 1;
 	else
 		return -ENODEV;
@@ -729,9 +729,9 @@
 		return -ENODEV;
 	}
 
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		rc = g5_pm72_cpufreq_init(cpus);
 #ifdef CONFIG_PMAC_SMU
 	else
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index fbc9bbd..33e815f 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2426,7 +2426,7 @@
 	    }
 	}
 	for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
-	    if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
+	    if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) {
 		pmac_mb = pmac_mb_defs[i];
 		goto found;
 	    }
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index 96d5ce5..ede49e7 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -842,7 +842,7 @@
 	list_for_each_entry(func, &dev->functions, link) {
 		if (name && strcmp(name, func->name))
 			continue;
-		if (func->phandle && target->node != func->phandle)
+		if (func->phandle && target->phandle != func->phandle)
 			continue;
 		if ((func->flags & flags) == 0)
 			continue;
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index b40c22d..6898e82 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -693,9 +693,9 @@
 #ifdef CONFIG_PPC64
 
 	/* i2c based HW sync on some G5s */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		smp_core99_setup_i2c_hwsync(ncpus);
 
 	/* pfunc based HW sync on recent G5s */
@@ -713,7 +713,7 @@
 #else /* CONFIG_PPC64 */
 
 	/* GPIO based HW sync on ppc32 Core99 */
-	if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) {
+	if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) {
 		struct device_node *cpu;
 		const u32 *tbprop = NULL;
 
@@ -750,7 +750,7 @@
 #endif
 
 	/* 32 bits SMP can't NAP */
-	if (!machine_is_compatible("MacRISC4"))
+	if (!of_machine_is_compatible("MacRISC4"))
 		powersave_nap = 0;
 }
 
@@ -852,7 +852,7 @@
 		/* If we didn't start the second CPU, we must take
 		 * it off the bus
 		 */
-		if (machine_is_compatible("MacRISC4") &&
+		if (of_machine_is_compatible("MacRISC4") &&
 		    num_online_cpus() < 2)		
 			g5_phy_disable_cpu1();
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index 1810e422..48211ca 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -317,9 +317,9 @@
 	 * calibration. That's better since the VIA itself seems
 	 * to be slightly off. --BenH
 	 */
-	if (!machine_is_compatible("MacRISC2") &&
-	    !machine_is_compatible("MacRISC3") &&
-	    !machine_is_compatible("MacRISC4"))
+	if (!of_machine_is_compatible("MacRISC2") &&
+	    !of_machine_is_compatible("MacRISC3") &&
+	    !of_machine_is_compatible("MacRISC4"))
 		if (via_calibrate_decr())
 			return;
 
@@ -328,7 +328,7 @@
 	 * probably implement calibration based on the KL timer on these
 	 * machines anyway... -BenH
 	 */
-	if (machine_is_compatible("PowerMac3,5"))
+	if (of_machine_is_compatible("PowerMac3,5"))
 		if (via_calibrate_decr())
 			return;
 #endif
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 9490157..d83135a9 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -132,9 +132,9 @@
 		scc_inittab[1] = in_8(sccc);
 		out_8(sccc, 12);
 		scc_inittab[3] = in_8(sccc);
-	} else if (machine_is_compatible("RackMac1,1")
-		   || machine_is_compatible("RackMac1,2")
-		   || machine_is_compatible("MacRISC4")) {
+	} else if (of_machine_is_compatible("RackMac1,1")
+		   || of_machine_is_compatible("RackMac1,2")
+		   || of_machine_is_compatible("MacRISC4")) {
 		/* Xserves and G5s default to 57600 */
 		scc_inittab[1] = 0;
 		scc_inittab[3] = 0;
diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c
index 5da37c2..cf27df6 100644
--- a/arch/powerpc/sysdev/grackle.c
+++ b/arch/powerpc/sysdev/grackle.c
@@ -56,9 +56,9 @@
 void __init setup_grackle(struct pci_controller *hose)
 {
 	setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
-	if (machine_is_compatible("PowerMac1,1"))
+	if (of_machine_is_compatible("PowerMac1,1"))
 		ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
-	if (machine_is_compatible("AAPL,PowerBook1998"))
+	if (of_machine_is_compatible("AAPL,PowerBook1998"))
 		grackle_set_loop_snoop(hose, 1);
 #if 0	/* Disabled for now, HW problems ??? */
 	grackle_set_stg(hose, 1);
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 6be4503..58f4673 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -78,14 +78,14 @@
 	struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
 	int ret;
 
-	sctx->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
-	sctx->fallback.blk->base.crt_flags |= (tfm->crt_flags &
+	sctx->fallback.cip->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
+	sctx->fallback.cip->base.crt_flags |= (tfm->crt_flags &
 			CRYPTO_TFM_REQ_MASK);
 
 	ret = crypto_cipher_setkey(sctx->fallback.cip, in_key, key_len);
 	if (ret) {
 		tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
-		tfm->crt_flags |= (sctx->fallback.blk->base.crt_flags &
+		tfm->crt_flags |= (sctx->fallback.cip->base.crt_flags &
 				CRYPTO_TFM_RES_MASK);
 	}
 	return ret;
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 41d8f01..953af13 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -182,8 +182,8 @@
  * addresses to be allocated in the 0x000-0x0ff region
  * modulo 0x400.
  */
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
 	struct pci_channel *hose = dev->sysdata;
@@ -200,7 +200,7 @@
 			start = (start + 0x3ff) & ~0x3ff;
 	}
 
-	res->start = start;
+	return start;
 }
 
 void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
index 55db5ec..39327d6 100644
--- a/arch/sparc/include/asm/stat.h
+++ b/arch/sparc/include/asm/stat.h
@@ -53,8 +53,8 @@
 	ino_t		st_ino;
 	mode_t		st_mode;
 	short		st_nlink;
-	uid_t		st_uid;
-	gid_t		st_gid;
+	uid16_t		st_uid;
+	gid16_t		st_gid;
 	unsigned short	st_rdev;
 	off_t		st_size;
 	time_t		st_atime;
diff --git a/arch/sparc/kernel/devices.c b/arch/sparc/kernel/devices.c
index b171ae8..b062de9 100644
--- a/arch/sparc/kernel/devices.c
+++ b/arch/sparc/kernel/devices.c
@@ -59,7 +59,7 @@
 
 	cur_inst = 0;
 	for_each_node_by_type(dp, "cpu") {
-		int err = check_cpu_node(dp->node, &cur_inst,
+		int err = check_cpu_node(dp->phandle, &cur_inst,
 					 compare, compare_arg,
 					 prom_node, mid);
 		if (!err) {
diff --git a/arch/sparc/kernel/kstack.h b/arch/sparc/kernel/kstack.h
index 4248d96..5247283 100644
--- a/arch/sparc/kernel/kstack.h
+++ b/arch/sparc/kernel/kstack.h
@@ -11,6 +11,10 @@
 {
 	unsigned long base = (unsigned long) tp;
 
+	/* Stack pointer must be 16-byte aligned.  */
+	if (sp & (16UL - 1))
+		return false;
+
 	if (sp >= (base + sizeof(struct thread_info)) &&
 	    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
 		return true;
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 4c26eb5..da527b33 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -105,7 +105,7 @@
 
 static int of_bus_ambapp_match(struct device_node *np)
 {
-	return !strcmp(np->name, "ambapp");
+	return !strcmp(np->type, "ambapp");
 }
 
 static void of_bus_ambapp_count_cells(struct device_node *child,
@@ -433,7 +433,7 @@
 	if (!parent)
 		dev_set_name(&op->dev, "root");
 	else
-		dev_set_name(&op->dev, "%08x", dp->node);
+		dev_set_name(&op->dev, "%08x", dp->phandle);
 
 	if (of_device_register(op)) {
 		printk("%s: Could not register of device.\n",
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 0a6f2d1..b3d4cb5 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -676,7 +676,7 @@
 	if (!parent)
 		dev_set_name(&op->dev, "root");
 	else
-		dev_set_name(&op->dev, "%08x", dp->node);
+		dev_set_name(&op->dev, "%08x", dp->phandle);
 
 	if (of_device_register(op)) {
 		printk("%s: Could not register of device.\n",
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 539e83f..37b66c6 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -247,6 +247,7 @@
 					 struct pci_bus *bus, int devfn)
 {
 	struct dev_archdata *sd;
+	struct pci_slot *slot;
 	struct of_device *op;
 	struct pci_dev *dev;
 	const char *type;
@@ -286,6 +287,11 @@
 	dev->dev.bus = &pci_bus_type;
 	dev->devfn = devfn;
 	dev->multifunction = 0;		/* maybe a lie? */
+	set_pcie_port_type(dev);
+
+	list_for_each_entry(slot, &dev->bus->slots, list)
+		if (PCI_SLOT(dev->devfn) == slot->number)
+			dev->slot = slot;
 
 	dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
 	dev->device = of_getintprop_default(node, "device-id", 0xffff);
@@ -322,6 +328,7 @@
 
 	dev->current_state = 4;		/* unknown power state */
 	dev->error_state = pci_channel_io_normal;
+	dev->dma_mask = 0xffffffff;
 
 	if (!strcmp(node->name, "pci")) {
 		/* a PCI-PCI bridge */
@@ -715,9 +722,10 @@
 {
 }
 
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
+	return res->start;
 }
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 4e2724e..75e88c00 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -768,9 +768,10 @@
 	return str;
 }
 
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
+	return res->start;
 }
 
 int pcibios_enable_device(struct pci_dev *pdev, int mask)
diff --git a/arch/sparc/kernel/prom.h b/arch/sparc/kernel/prom.h
index 453397f..a8591ef 100644
--- a/arch/sparc/kernel/prom.h
+++ b/arch/sparc/kernel/prom.h
@@ -4,9 +4,6 @@
 #include <linux/spinlock.h>
 #include <asm/prom.h>
 
-extern struct device_node *allnodes;	/* temporary while merging */
-extern rwlock_t devtree_lock;	/* temporary while merging */
-
 extern void * prom_early_alloc(unsigned long size);
 extern void irq_trans_init(struct device_node *dp);
 
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index d80a65d..57ac9e2 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -37,18 +37,6 @@
 char *of_console_options;
 EXPORT_SYMBOL(of_console_options);
 
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
-	struct device_node *np;
-
-	for (np = allnodes; np; np = np->allnext)
-		if (np->node == handle)
-			break;
-
-	return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
 int of_getintprop_default(struct device_node *np, const char *name, int def)
 {
 	struct property *prop;
@@ -89,7 +77,7 @@
 			void *old_val = prop->value;
 			int ret;
 
-			ret = prom_setprop(dp->node, name, val, len);
+			ret = prom_setprop(dp->phandle, name, val, len);
 
 			err = -EINVAL;
 			if (ret >= 0) {
@@ -236,7 +224,7 @@
 
 	dp->name = get_one_property(node, "name");
 	dp->type = get_one_property(node, "device_type");
-	dp->node = node;
+	dp->phandle = node;
 
 	dp->properties = build_prop_list(node);
 
@@ -313,7 +301,7 @@
 
 	nextp = &allnodes->allnext;
 	allnodes->child = prom_build_tree(allnodes,
-					  prom_getchild(allnodes->node),
+					  prom_getchild(allnodes->phandle),
 					  &nextp);
 	of_console_init();
 
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index aa36223..eb14844 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -370,7 +370,7 @@
 	} else {
 		struct device_node *dp = of_find_node_by_cpuid(cpu);
 
-		prom_startcpu(dp->node, entry, cookie);
+		prom_startcpu(dp->phandle, entry, cookie);
 	}
 
 	for (timeout = 0; timeout < 50000; timeout++) {
diff --git a/arch/sparc/kernel/tsb.S b/arch/sparc/kernel/tsb.S
index 8c91d9b..db15d12 100644
--- a/arch/sparc/kernel/tsb.S
+++ b/arch/sparc/kernel/tsb.S
@@ -191,10 +191,12 @@
 
 tsb_itlb_load:
 	/* Executable bit must be set.  */
-661:	andcc		%g5, _PAGE_EXEC_4U, %g0
-	.section	.sun4v_1insn_patch, "ax"
+661:	sethi		%hi(_PAGE_EXEC_4U), %g4
+	andcc		%g5, %g4, %g0
+	.section	.sun4v_2insn_patch, "ax"
 	.word		661b
 	andcc		%g5, _PAGE_EXEC_4V, %g0
+	nop
 	.previous
 
 	be,pn		%xcc, tsb_do_fault
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 1994d3f..f2ad216 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -170,10 +170,7 @@
 }
 
 #define ELF_PLAT_INIT(_r, load_addr)			\
-do {							\
-	elf_common_init(&current->thread, _r, 0);	\
-	clear_thread_flag(TIF_IA32);			\
-} while (0)
+	elf_common_init(&current->thread, _r, 0)
 
 #define	COMPAT_ELF_PLAT_INIT(regs, load_addr)		\
 	elf_common_init(&current->thread, regs, __USER_DS)
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index b4bf9a9..05b58cc 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -29,6 +29,7 @@
 #define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
 #define PCI_HAS_IO_ECS		0x40000
 #define PCI_NOASSIGN_ROMS	0x80000
+#define PCI_ROOT_NO_CRS		0x100000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index fc801ba..b753ea5 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -450,6 +450,8 @@
 	struct perf_event	*ptrace_bps[HBP_NUM];
 	/* Debug status used for traps, single steps, etc... */
 	unsigned long           debugreg6;
+	/* Keep track of the exact dr7 value set by the user */
+	unsigned long           ptrace_dr7;
 	/* Fault info: */
 	unsigned long		cr2;
 	unsigned long		trap_no;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 0acbcdf..af1c583 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1344,14 +1344,6 @@
 	 },
 	{
 	 .callback = force_acpi_ht,
-	 .ident = "ASUS P2B-DS",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
 	 .ident = "ASUS CUR-DLS",
 	 .matches = {
 		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index 05d5fec..bb6006e 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -212,25 +212,6 @@
 	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
 }
 
-/*
- * Store a breakpoint's encoded address, length, and type.
- */
-static int arch_store_info(struct perf_event *bp)
-{
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-	/*
-	 * For kernel-addresses, either the address or symbol name can be
-	 * specified.
-	 */
-	if (info->name)
-		info->address = (unsigned long)
-				kallsyms_lookup_name(info->name);
-	if (info->address)
-		return 0;
-
-	return -EINVAL;
-}
-
 int arch_bp_generic_fields(int x86_len, int x86_type,
 			   int *gen_len, int *gen_type)
 {
@@ -362,10 +343,13 @@
 		return ret;
 	}
 
-	ret = arch_store_info(bp);
-
-	if (ret < 0)
-		return ret;
+	/*
+	 * For kernel-addresses, either the address or symbol name can be
+	 * specified.
+	 */
+	if (info->name)
+		info->address = (unsigned long)
+				kallsyms_lookup_name(info->name);
 	/*
 	 * Check that the low-order bits of the address are appropriate
 	 * for the alignment implied by len.
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 41a26a8..126f0b4 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -527,6 +527,7 @@
 
 	/* Make sure to be in 32bit mode */
 	set_thread_flag(TIF_IA32);
+	current->personality |= force_personality32;
 
 	/* Prepare the first "return" to user space */
 	current_thread_info()->status |= TS_COMPAT;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 017d937..0c1033d 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -702,7 +702,7 @@
 	} else if (n == 6) {
 		val = thread->debugreg6;
 	 } else if (n == 7) {
-		val = ptrace_get_dr7(thread->ptrace_bps);
+		val = thread->ptrace_dr7;
 	}
 	return val;
 }
@@ -778,8 +778,11 @@
 			return rc;
 	}
 	/* All that's left is DR7 */
-	if (n == 7)
+	if (n == 7) {
 		rc = ptrace_write_dr7(tsk, val);
+		if (!rc)
+			thread->ptrace_dr7 = val;
+	}
 
 ret_path:
 	return rc;
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 959e548..5f11ff6 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -15,6 +15,51 @@
 	int busnum;
 };
 
+static bool pci_use_crs = true;
+
+static int __init set_use_crs(const struct dmi_system_id *id)
+{
+	pci_use_crs = true;
+	return 0;
+}
+
+static const struct dmi_system_id pci_use_crs_table[] __initconst = {
+	/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
+	{
+		.callback = set_use_crs,
+		.ident = "IBM System x3800",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+		},
+	},
+	{}
+};
+
+void __init pci_acpi_crs_quirks(void)
+{
+	int year;
+
+	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
+		pci_use_crs = false;
+
+	dmi_check_system(pci_use_crs_table);
+
+	/*
+	 * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
+	 * takes precedence over anything we figured out above.
+	 */
+	if (pci_probe & PCI_ROOT_NO_CRS)
+		pci_use_crs = false;
+	else if (pci_probe & PCI_USE__CRS)
+		pci_use_crs = true;
+
+	printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
+	       "if necessary, use \"pci=%s\" and report a bug\n",
+	       pci_use_crs ? "Using" : "Ignoring",
+	       pci_use_crs ? "nocrs" : "use_crs");
+}
+
 static acpi_status
 resource_to_addr(struct acpi_resource *resource,
 			struct acpi_resource_address64 *addr)
@@ -45,20 +90,6 @@
 	return AE_OK;
 }
 
-static int
-bus_has_transparent_bridge(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 class = dev->class >> 8;
-
-		if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent)
-			return true;
-	}
-	return false;
-}
-
 static void
 align_resource(struct acpi_device *bridge, struct resource *res)
 {
@@ -92,12 +123,8 @@
 	acpi_status status;
 	unsigned long flags;
 	struct resource *root;
-	int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
 	u64 start, end;
 
-	if (bus_has_transparent_bridge(info->bus))
-		max_root_bus_resources -= 3;
-
 	status = resource_to_addr(acpi_res, &addr);
 	if (!ACPI_SUCCESS(status))
 		return AE_OK;
@@ -115,15 +142,6 @@
 
 	start = addr.minimum + addr.translation_offset;
 	end = start + addr.address_length - 1;
-	if (info->res_num >= max_root_bus_resources) {
-		if (pci_probe & PCI_USE__CRS)
-			printk(KERN_WARNING "PCI: Failed to allocate "
-			       "0x%lx-0x%lx from %s for %s due to _CRS "
-			       "returning more than %d resource descriptors\n",
-			       (unsigned long) start, (unsigned long) end,
-			       root->name, info->name, max_root_bus_resources);
-		return AE_OK;
-	}
 
 	res = &info->res[info->res_num];
 	res->name = info->name;
@@ -133,7 +151,7 @@
 	res->child = NULL;
 	align_resource(info->bridge, res);
 
-	if (!(pci_probe & PCI_USE__CRS)) {
+	if (!pci_use_crs) {
 		dev_printk(KERN_DEBUG, &info->bridge->dev,
 			   "host bridge window %pR (ignored)\n", res);
 		return AE_OK;
@@ -143,7 +161,7 @@
 		dev_err(&info->bridge->dev,
 			"can't allocate host bridge window %pR\n", res);
 	} else {
-		info->bus->resource[info->res_num] = res;
+		pci_bus_add_resource(info->bus, res, 0);
 		info->res_num++;
 		if (addr.translation_offset)
 			dev_info(&info->bridge->dev, "host bridge window %pR "
@@ -164,10 +182,8 @@
 	struct pci_root_info info;
 	size_t size;
 
-	if (!(pci_probe & PCI_USE__CRS))
-		dev_info(&device->dev,
-			 "ignoring host bridge windows from ACPI; "
-			 "boot with \"pci=use_crs\" to use them\n");
+	if (pci_use_crs)
+		pci_bus_remove_resources(bus);
 
 	info.bridge = device;
 	info.bus = bus;
diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c
index f939d60..12d54ff 100644
--- a/arch/x86/pci/bus_numa.c
+++ b/arch/x86/pci/bus_numa.c
@@ -36,13 +36,14 @@
 	printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
 			b->number);
 
+	pci_bus_remove_resources(b);
 	info = &pci_root_info[i];
 	for (j = 0; j < info->res_num; j++) {
 		struct resource *res;
 		struct resource *root;
 
 		res = &info->res[j];
-		b->resource[j] = res;
+		pci_bus_add_resource(b, res, 0);
 		if (res->flags & IORESOURCE_IO)
 			root = &ioport_resource;
 		else
diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h
index adbc23fe..731b64e 100644
--- a/arch/x86/pci/bus_numa.h
+++ b/arch/x86/pci/bus_numa.h
@@ -2,8 +2,7 @@
 
 /*
  * sub bus (transparent) will use entres from 3 to store extra from
- * root, so need to make sure we have enough slot there, Should we
- * increase PCI_BUS_NUM_RESOURCES?
+ * root, so need to make sure we have enough slot there.
  */
 #define RES_NUM 16
 struct pci_root_info {
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index d2552c6..3736176 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -520,6 +520,9 @@
 	} else if (!strcmp(str, "use_crs")) {
 		pci_probe |= PCI_USE__CRS;
 		return NULL;
+	} else if (!strcmp(str, "nocrs")) {
+		pci_probe |= PCI_ROOT_NO_CRS;
+		return NULL;
 	} else if (!strcmp(str, "earlydump")) {
 		pci_early_dump_regs = 1;
 		return NULL;
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 5dc9e8c..5a8fbf8 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -60,22 +60,20 @@
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 			resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
 		if (skip_isa_ioresource_align(dev))
-			return;
-		if (start & 0x300) {
+			return start;
+		if (start & 0x300)
 			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
 	}
+	return start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 0696d50..b02f6d8 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -590,6 +590,8 @@
 	case PCI_DEVICE_ID_INTEL_ICH10_1:
 	case PCI_DEVICE_ID_INTEL_ICH10_2:
 	case PCI_DEVICE_ID_INTEL_ICH10_3:
+	case PCI_DEVICE_ID_INTEL_CPT_LPC1:
+	case PCI_DEVICE_ID_INTEL_CPT_LPC2:
 		r->name = "PIIX/ICH";
 		r->get = pirq_piix_get;
 		r->set = pirq_piix_set;
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index b19d1e5..8f3f9a5 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -303,22 +303,17 @@
 {
 	struct pci_mmcfg_region *cfg, *cfgx;
 
-	/* last one*/
-	cfg = list_entry(pci_mmcfg_list.prev, typeof(*cfg), list);
-	if (cfg)
-		if (cfg->end_bus < cfg->start_bus)
-			cfg->end_bus = 255;
-
-	if (list_is_singular(&pci_mmcfg_list))
-		return;
-
-	/* don't overlap please */
+	/* Fixup overlaps */
 	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
 		if (cfg->end_bus < cfg->start_bus)
 			cfg->end_bus = 255;
 
+		/* Don't access the list head ! */
+		if (cfg->list.next == &pci_mmcfg_list)
+			break;
+
 		cfgx = list_entry(cfg->list.next, typeof(*cfg), list);
-		if (cfg != cfgx && cfg->end_bus >= cfgx->start_bus)
+		if (cfg->end_bus >= cfgx->start_bus)
 			cfg->end_bus = cfgx->start_bus - 1;
 	}
 }
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index b7c0734..cd10269 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -69,26 +69,25 @@
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void
-pcibios_align_resource(void *data, struct resource *res, resource_size_t size,
-    		       resource_size_t align)
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+		       resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
 		if (size > 0x100) {
 			printk(KERN_ERR "PCI: I/O Region %s/%d too large"
 			       " (%ld bytes)\n", pci_name(dev),
 			       dev->resource - res, size);
 		}
 
-		if (start & 0x300) {
+		if (start & 0x300)
 			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
 	}
+
+	return start;
 }
 
 int
diff --git a/block/blk-core.c b/block/blk-core.c
index 718897e6..d1a9a0a 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1147,7 +1147,7 @@
  */
 static inline bool queue_should_plug(struct request_queue *q)
 {
-	return !(blk_queue_nonrot(q) && blk_queue_queuing(q));
+	return !(blk_queue_nonrot(q) && blk_queue_tagged(q));
 }
 
 static int __make_request(struct request_queue *q, struct bio *bio)
@@ -1859,15 +1859,8 @@
 	 * and to it is freed is accounted as io that is in progress at
 	 * the driver side.
 	 */
-	if (blk_account_rq(rq)) {
+	if (blk_account_rq(rq))
 		q->in_flight[rq_is_sync(rq)]++;
-		/*
-		 * Mark this device as supporting hardware queuing, if
-		 * we have more IOs in flight than 4.
-		 */
-		if (!blk_queue_queuing(q) && queue_in_flight(q) > 4)
-			set_bit(QUEUE_FLAG_CQ, &q->queue_flags);
-	}
 }
 
 /**
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 81c185a..6a2e295 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -114,6 +114,16 @@
 	help
 	  These are 'Null' algorithms, used by IPsec, which do nothing.
 
+config CRYPTO_PCRYPT
+	tristate "Parallel crypto engine (EXPERIMENTAL)"
+	depends on SMP && EXPERIMENTAL
+	select PADATA
+	select CRYPTO_MANAGER
+	select CRYPTO_AEAD
+	help
+	  This converts an arbitrary crypto algorithm into a parallel
+	  algorithm that executes in kernel threads.
+
 config CRYPTO_WORKQUEUE
        tristate
 
diff --git a/crypto/Makefile b/crypto/Makefile
index 9e8f619..d7e6441 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -56,6 +56,7 @@
 obj-$(CONFIG_CRYPTO_CTR) += ctr.o
 obj-$(CONFIG_CRYPTO_GCM) += gcm.o
 obj-$(CONFIG_CRYPTO_CCM) += ccm.o
+obj-$(CONFIG_CRYPTO_PCRYPT) += pcrypt.o
 obj-$(CONFIG_CRYPTO_CRYPTD) += cryptd.o
 obj-$(CONFIG_CRYPTO_DES) += des_generic.o
 obj-$(CONFIG_CRYPTO_FCRYPT) += fcrypt.o
diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c
index f6f0833..fe980da 100644
--- a/crypto/ablkcipher.c
+++ b/crypto/ablkcipher.c
@@ -1,6 +1,6 @@
 /*
  * Asynchronous block chaining cipher operations.
- * 
+ *
  * This is the asynchronous version of blkcipher.c indicating completion
  * via a callback.
  *
@@ -8,7 +8,7 @@
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option) 
+ * Software Foundation; either version 2 of the License, or (at your option)
  * any later version.
  *
  */
diff --git a/crypto/aead.c b/crypto/aead.c
index 0a55da7..6729e8f 100644
--- a/crypto/aead.c
+++ b/crypto/aead.c
@@ -1,13 +1,13 @@
 /*
  * AEAD: Authenticated Encryption with Associated Data
- * 
+ *
  * This file provides API support for AEAD algorithms.
  *
  * Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option) 
+ * Software Foundation; either version 2 of the License, or (at your option)
  * any later version.
  *
  */
diff --git a/crypto/aes_generic.c b/crypto/aes_generic.c
index e78b7ee..a68c73d 100644
--- a/crypto/aes_generic.c
+++ b/crypto/aes_generic.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * Cryptographic API.
  *
  * AES Cipher Algorithm.
@@ -1127,7 +1127,7 @@
 
 #define star_x(x) (((x) & 0x7f7f7f7f) << 1) ^ ((((x) & 0x80808080) >> 7) * 0x1b)
 
-#define imix_col(y,x)	do {		\
+#define imix_col(y, x)	do {		\
 	u	= star_x(x);		\
 	v	= star_x(u);		\
 	w	= star_x(v);		\
diff --git a/crypto/algapi.c b/crypto/algapi.c
index f149b1c..3e4524e 100644
--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -230,7 +230,7 @@
 	list_add(&alg->cra_list, &crypto_alg_list);
 	list_add(&larval->alg.cra_list, &crypto_alg_list);
 
-out:	
+out:
 	return larval;
 
 free_larval:
@@ -388,7 +388,7 @@
 {
 	int ret;
 	LIST_HEAD(list);
-	
+
 	down_write(&crypto_alg_sem);
 	ret = crypto_remove_alg(alg, &list);
 	up_write(&crypto_alg_sem);
diff --git a/crypto/anubis.c b/crypto/anubis.c
index e42c3a8..77530d5 100644
--- a/crypto/anubis.c
+++ b/crypto/anubis.c
@@ -469,14 +469,13 @@
 	u32 kappa[ANUBIS_MAX_N];
 	u32 inter[ANUBIS_MAX_N];
 
-	switch (key_len)
-	{
+	switch (key_len) {
 		case 16: case 20: case 24: case 28:
 		case 32: case 36: case 40:
 			break;
 		default:
 			*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-			return - EINVAL;
+			return -EINVAL;
 	}
 
 	ctx->key_len = key_len * 8;
@@ -530,23 +529,24 @@
 		/*
 		 * compute kappa^{r+1} from kappa^r:
 		 */
-		if (r == R) {
+		if (r == R)
 			break;
-		}
 		for (i = 0; i < N; i++) {
 			int j = i;
 			inter[i]  = T0[(kappa[j--] >> 24)       ];
-			if (j < 0) j = N - 1;
+			if (j < 0)
+				j = N - 1;
 			inter[i] ^= T1[(kappa[j--] >> 16) & 0xff];
-			if (j < 0) j = N - 1;
+			if (j < 0)
+				j = N - 1;
 			inter[i] ^= T2[(kappa[j--] >>  8) & 0xff];
-			if (j < 0) j = N - 1;
+			if (j < 0)
+				j = N - 1;
 			inter[i] ^= T3[(kappa[j  ]      ) & 0xff];
 		}
 		kappa[0] = inter[0] ^ rc[r];
-		for (i = 1; i < N; i++) {
+		for (i = 1; i < N; i++)
 			kappa[i] = inter[i];
-		}
 	}
 
 	/*
@@ -690,7 +690,7 @@
 static int __init anubis_mod_init(void)
 {
 	int ret = 0;
-	
+
 	ret = crypto_register_alg(&anubis_alg);
 	return ret;
 }
diff --git a/crypto/api.c b/crypto/api.c
index 798526d..033a714 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -10,7 +10,7 @@
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option) 
+ * Software Foundation; either version 2 of the License, or (at your option)
  * any later version.
  *
  */
@@ -288,11 +288,11 @@
 
 	case CRYPTO_ALG_TYPE_COMPRESS:
 		return crypto_init_compress_ops(tfm);
-	
+
 	default:
 		break;
 	}
-	
+
 	BUG();
 	return -EINVAL;
 }
@@ -315,10 +315,9 @@
 	case CRYPTO_ALG_TYPE_COMPRESS:
 		crypto_exit_compress_ops(tfm);
 		break;
-	
+
 	default:
 		BUG();
-		
 	}
 }
 
@@ -593,12 +592,12 @@
 {
 	int ret = 0;
 	struct crypto_alg *alg = crypto_alg_mod_lookup(name, type, mask);
-	
+
 	if (!IS_ERR(alg)) {
 		crypto_mod_put(alg);
 		ret = 1;
 	}
-	
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(crypto_has_alg);
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 4d6f49a..1887090 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -194,7 +194,7 @@
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG: 0;
+	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -231,7 +231,7 @@
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG: 0;
+	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -464,7 +464,7 @@
 	ihash = ohash + authsize;
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
-	return memcmp(ihash, ohash, authsize) ? -EBADMSG: 0;
+	return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
 }
 
 static int crypto_authenc_iverify(struct aead_request *req, u8 *iv,
@@ -557,11 +557,11 @@
 
 	ctx->auth = auth;
 	ctx->enc = enc;
-	
+
 	tfm->crt_aead.reqsize = max_t(unsigned int,
 				crypto_ahash_reqsize(auth) + ctx->reqoff +
 				sizeof(struct authenc_request_ctx) +
-				sizeof(struct ahash_request), 
+				sizeof(struct ahash_request),
 				sizeof(struct skcipher_givcrypt_request) +
 				crypto_ablkcipher_reqsize(enc) +
 				crypto_ablkcipher_ivsize(enc));
diff --git a/crypto/blowfish.c b/crypto/blowfish.c
index 6f5b487..a67d52e 100644
--- a/crypto/blowfish.c
+++ b/crypto/blowfish.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * Cryptographic API.
  *
  * Blowfish Cipher Algorithm, by Bruce Schneier.
@@ -299,7 +299,7 @@
 	0xb74e6132, 0xce77e25b, 0x578fdfe3, 0x3ac372e6,
 };
 
-/* 
+/*
  * Round loop unrolling macros, S is a pointer to a S-Box array
  * organized in 4 unsigned longs at a row.
  */
@@ -315,7 +315,7 @@
 
 /*
  * The blowfish encipher, processes 64-bit blocks.
- * NOTE: This function MUSTN'T respect endianess 
+ * NOTE: This function MUSTN'T respect endianess
  */
 static void encrypt_block(struct bf_ctx *bctx, u32 *dst, u32 *src)
 {
@@ -395,7 +395,7 @@
 	out_blk[1] = cpu_to_be32(yl);
 }
 
-/* 
+/*
  * Calculates the blowfish S and P boxes for encryption and decryption.
  */
 static int bf_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
@@ -417,10 +417,10 @@
 
 	/* Actual subkey generation */
 	for (j = 0, i = 0; i < 16 + 2; i++) {
-		temp = (((u32 )key[j] << 24) |
-			((u32 )key[(j + 1) % keylen] << 16) |
-			((u32 )key[(j + 2) % keylen] << 8) |
-			((u32 )key[(j + 3) % keylen]));
+		temp = (((u32)key[j] << 24) |
+			((u32)key[(j + 1) % keylen] << 16) |
+			((u32)key[(j + 2) % keylen] << 8) |
+			((u32)key[(j + 3) % keylen]));
 
 		P[i] = P[i] ^ temp;
 		j = (j + 4) % keylen;
@@ -444,7 +444,7 @@
 			S[count + 1] = data[1];
 		}
 	}
-	
+
 	/* Bruce says not to bother with the weak key check. */
 	return 0;
 }
diff --git a/crypto/camellia.c b/crypto/camellia.c
index 964635d..64cff46 100644
--- a/crypto/camellia.c
+++ b/crypto/camellia.c
@@ -39,271 +39,271 @@
 #include <asm/unaligned.h>
 
 static const u32 camellia_sp1110[256] = {
-	0x70707000,0x82828200,0x2c2c2c00,0xececec00,
-	0xb3b3b300,0x27272700,0xc0c0c000,0xe5e5e500,
-	0xe4e4e400,0x85858500,0x57575700,0x35353500,
-	0xeaeaea00,0x0c0c0c00,0xaeaeae00,0x41414100,
-	0x23232300,0xefefef00,0x6b6b6b00,0x93939300,
-	0x45454500,0x19191900,0xa5a5a500,0x21212100,
-	0xededed00,0x0e0e0e00,0x4f4f4f00,0x4e4e4e00,
-	0x1d1d1d00,0x65656500,0x92929200,0xbdbdbd00,
-	0x86868600,0xb8b8b800,0xafafaf00,0x8f8f8f00,
-	0x7c7c7c00,0xebebeb00,0x1f1f1f00,0xcecece00,
-	0x3e3e3e00,0x30303000,0xdcdcdc00,0x5f5f5f00,
-	0x5e5e5e00,0xc5c5c500,0x0b0b0b00,0x1a1a1a00,
-	0xa6a6a600,0xe1e1e100,0x39393900,0xcacaca00,
-	0xd5d5d500,0x47474700,0x5d5d5d00,0x3d3d3d00,
-	0xd9d9d900,0x01010100,0x5a5a5a00,0xd6d6d600,
-	0x51515100,0x56565600,0x6c6c6c00,0x4d4d4d00,
-	0x8b8b8b00,0x0d0d0d00,0x9a9a9a00,0x66666600,
-	0xfbfbfb00,0xcccccc00,0xb0b0b000,0x2d2d2d00,
-	0x74747400,0x12121200,0x2b2b2b00,0x20202000,
-	0xf0f0f000,0xb1b1b100,0x84848400,0x99999900,
-	0xdfdfdf00,0x4c4c4c00,0xcbcbcb00,0xc2c2c200,
-	0x34343400,0x7e7e7e00,0x76767600,0x05050500,
-	0x6d6d6d00,0xb7b7b700,0xa9a9a900,0x31313100,
-	0xd1d1d100,0x17171700,0x04040400,0xd7d7d700,
-	0x14141400,0x58585800,0x3a3a3a00,0x61616100,
-	0xdedede00,0x1b1b1b00,0x11111100,0x1c1c1c00,
-	0x32323200,0x0f0f0f00,0x9c9c9c00,0x16161600,
-	0x53535300,0x18181800,0xf2f2f200,0x22222200,
-	0xfefefe00,0x44444400,0xcfcfcf00,0xb2b2b200,
-	0xc3c3c300,0xb5b5b500,0x7a7a7a00,0x91919100,
-	0x24242400,0x08080800,0xe8e8e800,0xa8a8a800,
-	0x60606000,0xfcfcfc00,0x69696900,0x50505000,
-	0xaaaaaa00,0xd0d0d000,0xa0a0a000,0x7d7d7d00,
-	0xa1a1a100,0x89898900,0x62626200,0x97979700,
-	0x54545400,0x5b5b5b00,0x1e1e1e00,0x95959500,
-	0xe0e0e000,0xffffff00,0x64646400,0xd2d2d200,
-	0x10101000,0xc4c4c400,0x00000000,0x48484800,
-	0xa3a3a300,0xf7f7f700,0x75757500,0xdbdbdb00,
-	0x8a8a8a00,0x03030300,0xe6e6e600,0xdadada00,
-	0x09090900,0x3f3f3f00,0xdddddd00,0x94949400,
-	0x87878700,0x5c5c5c00,0x83838300,0x02020200,
-	0xcdcdcd00,0x4a4a4a00,0x90909000,0x33333300,
-	0x73737300,0x67676700,0xf6f6f600,0xf3f3f300,
-	0x9d9d9d00,0x7f7f7f00,0xbfbfbf00,0xe2e2e200,
-	0x52525200,0x9b9b9b00,0xd8d8d800,0x26262600,
-	0xc8c8c800,0x37373700,0xc6c6c600,0x3b3b3b00,
-	0x81818100,0x96969600,0x6f6f6f00,0x4b4b4b00,
-	0x13131300,0xbebebe00,0x63636300,0x2e2e2e00,
-	0xe9e9e900,0x79797900,0xa7a7a700,0x8c8c8c00,
-	0x9f9f9f00,0x6e6e6e00,0xbcbcbc00,0x8e8e8e00,
-	0x29292900,0xf5f5f500,0xf9f9f900,0xb6b6b600,
-	0x2f2f2f00,0xfdfdfd00,0xb4b4b400,0x59595900,
-	0x78787800,0x98989800,0x06060600,0x6a6a6a00,
-	0xe7e7e700,0x46464600,0x71717100,0xbababa00,
-	0xd4d4d400,0x25252500,0xababab00,0x42424200,
-	0x88888800,0xa2a2a200,0x8d8d8d00,0xfafafa00,
-	0x72727200,0x07070700,0xb9b9b900,0x55555500,
-	0xf8f8f800,0xeeeeee00,0xacacac00,0x0a0a0a00,
-	0x36363600,0x49494900,0x2a2a2a00,0x68686800,
-	0x3c3c3c00,0x38383800,0xf1f1f100,0xa4a4a400,
-	0x40404000,0x28282800,0xd3d3d300,0x7b7b7b00,
-	0xbbbbbb00,0xc9c9c900,0x43434300,0xc1c1c100,
-	0x15151500,0xe3e3e300,0xadadad00,0xf4f4f400,
-	0x77777700,0xc7c7c700,0x80808000,0x9e9e9e00,
+	0x70707000, 0x82828200, 0x2c2c2c00, 0xececec00,
+	0xb3b3b300, 0x27272700, 0xc0c0c000, 0xe5e5e500,
+	0xe4e4e400, 0x85858500, 0x57575700, 0x35353500,
+	0xeaeaea00, 0x0c0c0c00, 0xaeaeae00, 0x41414100,
+	0x23232300, 0xefefef00, 0x6b6b6b00, 0x93939300,
+	0x45454500, 0x19191900, 0xa5a5a500, 0x21212100,
+	0xededed00, 0x0e0e0e00, 0x4f4f4f00, 0x4e4e4e00,
+	0x1d1d1d00, 0x65656500, 0x92929200, 0xbdbdbd00,
+	0x86868600, 0xb8b8b800, 0xafafaf00, 0x8f8f8f00,
+	0x7c7c7c00, 0xebebeb00, 0x1f1f1f00, 0xcecece00,
+	0x3e3e3e00, 0x30303000, 0xdcdcdc00, 0x5f5f5f00,
+	0x5e5e5e00, 0xc5c5c500, 0x0b0b0b00, 0x1a1a1a00,
+	0xa6a6a600, 0xe1e1e100, 0x39393900, 0xcacaca00,
+	0xd5d5d500, 0x47474700, 0x5d5d5d00, 0x3d3d3d00,
+	0xd9d9d900, 0x01010100, 0x5a5a5a00, 0xd6d6d600,
+	0x51515100, 0x56565600, 0x6c6c6c00, 0x4d4d4d00,
+	0x8b8b8b00, 0x0d0d0d00, 0x9a9a9a00, 0x66666600,
+	0xfbfbfb00, 0xcccccc00, 0xb0b0b000, 0x2d2d2d00,
+	0x74747400, 0x12121200, 0x2b2b2b00, 0x20202000,
+	0xf0f0f000, 0xb1b1b100, 0x84848400, 0x99999900,
+	0xdfdfdf00, 0x4c4c4c00, 0xcbcbcb00, 0xc2c2c200,
+	0x34343400, 0x7e7e7e00, 0x76767600, 0x05050500,
+	0x6d6d6d00, 0xb7b7b700, 0xa9a9a900, 0x31313100,
+	0xd1d1d100, 0x17171700, 0x04040400, 0xd7d7d700,
+	0x14141400, 0x58585800, 0x3a3a3a00, 0x61616100,
+	0xdedede00, 0x1b1b1b00, 0x11111100, 0x1c1c1c00,
+	0x32323200, 0x0f0f0f00, 0x9c9c9c00, 0x16161600,
+	0x53535300, 0x18181800, 0xf2f2f200, 0x22222200,
+	0xfefefe00, 0x44444400, 0xcfcfcf00, 0xb2b2b200,
+	0xc3c3c300, 0xb5b5b500, 0x7a7a7a00, 0x91919100,
+	0x24242400, 0x08080800, 0xe8e8e800, 0xa8a8a800,
+	0x60606000, 0xfcfcfc00, 0x69696900, 0x50505000,
+	0xaaaaaa00, 0xd0d0d000, 0xa0a0a000, 0x7d7d7d00,
+	0xa1a1a100, 0x89898900, 0x62626200, 0x97979700,
+	0x54545400, 0x5b5b5b00, 0x1e1e1e00, 0x95959500,
+	0xe0e0e000, 0xffffff00, 0x64646400, 0xd2d2d200,
+	0x10101000, 0xc4c4c400, 0x00000000, 0x48484800,
+	0xa3a3a300, 0xf7f7f700, 0x75757500, 0xdbdbdb00,
+	0x8a8a8a00, 0x03030300, 0xe6e6e600, 0xdadada00,
+	0x09090900, 0x3f3f3f00, 0xdddddd00, 0x94949400,
+	0x87878700, 0x5c5c5c00, 0x83838300, 0x02020200,
+	0xcdcdcd00, 0x4a4a4a00, 0x90909000, 0x33333300,
+	0x73737300, 0x67676700, 0xf6f6f600, 0xf3f3f300,
+	0x9d9d9d00, 0x7f7f7f00, 0xbfbfbf00, 0xe2e2e200,
+	0x52525200, 0x9b9b9b00, 0xd8d8d800, 0x26262600,
+	0xc8c8c800, 0x37373700, 0xc6c6c600, 0x3b3b3b00,
+	0x81818100, 0x96969600, 0x6f6f6f00, 0x4b4b4b00,
+	0x13131300, 0xbebebe00, 0x63636300, 0x2e2e2e00,
+	0xe9e9e900, 0x79797900, 0xa7a7a700, 0x8c8c8c00,
+	0x9f9f9f00, 0x6e6e6e00, 0xbcbcbc00, 0x8e8e8e00,
+	0x29292900, 0xf5f5f500, 0xf9f9f900, 0xb6b6b600,
+	0x2f2f2f00, 0xfdfdfd00, 0xb4b4b400, 0x59595900,
+	0x78787800, 0x98989800, 0x06060600, 0x6a6a6a00,
+	0xe7e7e700, 0x46464600, 0x71717100, 0xbababa00,
+	0xd4d4d400, 0x25252500, 0xababab00, 0x42424200,
+	0x88888800, 0xa2a2a200, 0x8d8d8d00, 0xfafafa00,
+	0x72727200, 0x07070700, 0xb9b9b900, 0x55555500,
+	0xf8f8f800, 0xeeeeee00, 0xacacac00, 0x0a0a0a00,
+	0x36363600, 0x49494900, 0x2a2a2a00, 0x68686800,
+	0x3c3c3c00, 0x38383800, 0xf1f1f100, 0xa4a4a400,
+	0x40404000, 0x28282800, 0xd3d3d300, 0x7b7b7b00,
+	0xbbbbbb00, 0xc9c9c900, 0x43434300, 0xc1c1c100,
+	0x15151500, 0xe3e3e300, 0xadadad00, 0xf4f4f400,
+	0x77777700, 0xc7c7c700, 0x80808000, 0x9e9e9e00,
 };
 
 static const u32 camellia_sp0222[256] = {
-	0x00e0e0e0,0x00050505,0x00585858,0x00d9d9d9,
-	0x00676767,0x004e4e4e,0x00818181,0x00cbcbcb,
-	0x00c9c9c9,0x000b0b0b,0x00aeaeae,0x006a6a6a,
-	0x00d5d5d5,0x00181818,0x005d5d5d,0x00828282,
-	0x00464646,0x00dfdfdf,0x00d6d6d6,0x00272727,
-	0x008a8a8a,0x00323232,0x004b4b4b,0x00424242,
-	0x00dbdbdb,0x001c1c1c,0x009e9e9e,0x009c9c9c,
-	0x003a3a3a,0x00cacaca,0x00252525,0x007b7b7b,
-	0x000d0d0d,0x00717171,0x005f5f5f,0x001f1f1f,
-	0x00f8f8f8,0x00d7d7d7,0x003e3e3e,0x009d9d9d,
-	0x007c7c7c,0x00606060,0x00b9b9b9,0x00bebebe,
-	0x00bcbcbc,0x008b8b8b,0x00161616,0x00343434,
-	0x004d4d4d,0x00c3c3c3,0x00727272,0x00959595,
-	0x00ababab,0x008e8e8e,0x00bababa,0x007a7a7a,
-	0x00b3b3b3,0x00020202,0x00b4b4b4,0x00adadad,
-	0x00a2a2a2,0x00acacac,0x00d8d8d8,0x009a9a9a,
-	0x00171717,0x001a1a1a,0x00353535,0x00cccccc,
-	0x00f7f7f7,0x00999999,0x00616161,0x005a5a5a,
-	0x00e8e8e8,0x00242424,0x00565656,0x00404040,
-	0x00e1e1e1,0x00636363,0x00090909,0x00333333,
-	0x00bfbfbf,0x00989898,0x00979797,0x00858585,
-	0x00686868,0x00fcfcfc,0x00ececec,0x000a0a0a,
-	0x00dadada,0x006f6f6f,0x00535353,0x00626262,
-	0x00a3a3a3,0x002e2e2e,0x00080808,0x00afafaf,
-	0x00282828,0x00b0b0b0,0x00747474,0x00c2c2c2,
-	0x00bdbdbd,0x00363636,0x00222222,0x00383838,
-	0x00646464,0x001e1e1e,0x00393939,0x002c2c2c,
-	0x00a6a6a6,0x00303030,0x00e5e5e5,0x00444444,
-	0x00fdfdfd,0x00888888,0x009f9f9f,0x00656565,
-	0x00878787,0x006b6b6b,0x00f4f4f4,0x00232323,
-	0x00484848,0x00101010,0x00d1d1d1,0x00515151,
-	0x00c0c0c0,0x00f9f9f9,0x00d2d2d2,0x00a0a0a0,
-	0x00555555,0x00a1a1a1,0x00414141,0x00fafafa,
-	0x00434343,0x00131313,0x00c4c4c4,0x002f2f2f,
-	0x00a8a8a8,0x00b6b6b6,0x003c3c3c,0x002b2b2b,
-	0x00c1c1c1,0x00ffffff,0x00c8c8c8,0x00a5a5a5,
-	0x00202020,0x00898989,0x00000000,0x00909090,
-	0x00474747,0x00efefef,0x00eaeaea,0x00b7b7b7,
-	0x00151515,0x00060606,0x00cdcdcd,0x00b5b5b5,
-	0x00121212,0x007e7e7e,0x00bbbbbb,0x00292929,
-	0x000f0f0f,0x00b8b8b8,0x00070707,0x00040404,
-	0x009b9b9b,0x00949494,0x00212121,0x00666666,
-	0x00e6e6e6,0x00cecece,0x00ededed,0x00e7e7e7,
-	0x003b3b3b,0x00fefefe,0x007f7f7f,0x00c5c5c5,
-	0x00a4a4a4,0x00373737,0x00b1b1b1,0x004c4c4c,
-	0x00919191,0x006e6e6e,0x008d8d8d,0x00767676,
-	0x00030303,0x002d2d2d,0x00dedede,0x00969696,
-	0x00262626,0x007d7d7d,0x00c6c6c6,0x005c5c5c,
-	0x00d3d3d3,0x00f2f2f2,0x004f4f4f,0x00191919,
-	0x003f3f3f,0x00dcdcdc,0x00797979,0x001d1d1d,
-	0x00525252,0x00ebebeb,0x00f3f3f3,0x006d6d6d,
-	0x005e5e5e,0x00fbfbfb,0x00696969,0x00b2b2b2,
-	0x00f0f0f0,0x00313131,0x000c0c0c,0x00d4d4d4,
-	0x00cfcfcf,0x008c8c8c,0x00e2e2e2,0x00757575,
-	0x00a9a9a9,0x004a4a4a,0x00575757,0x00848484,
-	0x00111111,0x00454545,0x001b1b1b,0x00f5f5f5,
-	0x00e4e4e4,0x000e0e0e,0x00737373,0x00aaaaaa,
-	0x00f1f1f1,0x00dddddd,0x00595959,0x00141414,
-	0x006c6c6c,0x00929292,0x00545454,0x00d0d0d0,
-	0x00787878,0x00707070,0x00e3e3e3,0x00494949,
-	0x00808080,0x00505050,0x00a7a7a7,0x00f6f6f6,
-	0x00777777,0x00939393,0x00868686,0x00838383,
-	0x002a2a2a,0x00c7c7c7,0x005b5b5b,0x00e9e9e9,
-	0x00eeeeee,0x008f8f8f,0x00010101,0x003d3d3d,
+	0x00e0e0e0, 0x00050505, 0x00585858, 0x00d9d9d9,
+	0x00676767, 0x004e4e4e, 0x00818181, 0x00cbcbcb,
+	0x00c9c9c9, 0x000b0b0b, 0x00aeaeae, 0x006a6a6a,
+	0x00d5d5d5, 0x00181818, 0x005d5d5d, 0x00828282,
+	0x00464646, 0x00dfdfdf, 0x00d6d6d6, 0x00272727,
+	0x008a8a8a, 0x00323232, 0x004b4b4b, 0x00424242,
+	0x00dbdbdb, 0x001c1c1c, 0x009e9e9e, 0x009c9c9c,
+	0x003a3a3a, 0x00cacaca, 0x00252525, 0x007b7b7b,
+	0x000d0d0d, 0x00717171, 0x005f5f5f, 0x001f1f1f,
+	0x00f8f8f8, 0x00d7d7d7, 0x003e3e3e, 0x009d9d9d,
+	0x007c7c7c, 0x00606060, 0x00b9b9b9, 0x00bebebe,
+	0x00bcbcbc, 0x008b8b8b, 0x00161616, 0x00343434,
+	0x004d4d4d, 0x00c3c3c3, 0x00727272, 0x00959595,
+	0x00ababab, 0x008e8e8e, 0x00bababa, 0x007a7a7a,
+	0x00b3b3b3, 0x00020202, 0x00b4b4b4, 0x00adadad,
+	0x00a2a2a2, 0x00acacac, 0x00d8d8d8, 0x009a9a9a,
+	0x00171717, 0x001a1a1a, 0x00353535, 0x00cccccc,
+	0x00f7f7f7, 0x00999999, 0x00616161, 0x005a5a5a,
+	0x00e8e8e8, 0x00242424, 0x00565656, 0x00404040,
+	0x00e1e1e1, 0x00636363, 0x00090909, 0x00333333,
+	0x00bfbfbf, 0x00989898, 0x00979797, 0x00858585,
+	0x00686868, 0x00fcfcfc, 0x00ececec, 0x000a0a0a,
+	0x00dadada, 0x006f6f6f, 0x00535353, 0x00626262,
+	0x00a3a3a3, 0x002e2e2e, 0x00080808, 0x00afafaf,
+	0x00282828, 0x00b0b0b0, 0x00747474, 0x00c2c2c2,
+	0x00bdbdbd, 0x00363636, 0x00222222, 0x00383838,
+	0x00646464, 0x001e1e1e, 0x00393939, 0x002c2c2c,
+	0x00a6a6a6, 0x00303030, 0x00e5e5e5, 0x00444444,
+	0x00fdfdfd, 0x00888888, 0x009f9f9f, 0x00656565,
+	0x00878787, 0x006b6b6b, 0x00f4f4f4, 0x00232323,
+	0x00484848, 0x00101010, 0x00d1d1d1, 0x00515151,
+	0x00c0c0c0, 0x00f9f9f9, 0x00d2d2d2, 0x00a0a0a0,
+	0x00555555, 0x00a1a1a1, 0x00414141, 0x00fafafa,
+	0x00434343, 0x00131313, 0x00c4c4c4, 0x002f2f2f,
+	0x00a8a8a8, 0x00b6b6b6, 0x003c3c3c, 0x002b2b2b,
+	0x00c1c1c1, 0x00ffffff, 0x00c8c8c8, 0x00a5a5a5,
+	0x00202020, 0x00898989, 0x00000000, 0x00909090,
+	0x00474747, 0x00efefef, 0x00eaeaea, 0x00b7b7b7,
+	0x00151515, 0x00060606, 0x00cdcdcd, 0x00b5b5b5,
+	0x00121212, 0x007e7e7e, 0x00bbbbbb, 0x00292929,
+	0x000f0f0f, 0x00b8b8b8, 0x00070707, 0x00040404,
+	0x009b9b9b, 0x00949494, 0x00212121, 0x00666666,
+	0x00e6e6e6, 0x00cecece, 0x00ededed, 0x00e7e7e7,
+	0x003b3b3b, 0x00fefefe, 0x007f7f7f, 0x00c5c5c5,
+	0x00a4a4a4, 0x00373737, 0x00b1b1b1, 0x004c4c4c,
+	0x00919191, 0x006e6e6e, 0x008d8d8d, 0x00767676,
+	0x00030303, 0x002d2d2d, 0x00dedede, 0x00969696,
+	0x00262626, 0x007d7d7d, 0x00c6c6c6, 0x005c5c5c,
+	0x00d3d3d3, 0x00f2f2f2, 0x004f4f4f, 0x00191919,
+	0x003f3f3f, 0x00dcdcdc, 0x00797979, 0x001d1d1d,
+	0x00525252, 0x00ebebeb, 0x00f3f3f3, 0x006d6d6d,
+	0x005e5e5e, 0x00fbfbfb, 0x00696969, 0x00b2b2b2,
+	0x00f0f0f0, 0x00313131, 0x000c0c0c, 0x00d4d4d4,
+	0x00cfcfcf, 0x008c8c8c, 0x00e2e2e2, 0x00757575,
+	0x00a9a9a9, 0x004a4a4a, 0x00575757, 0x00848484,
+	0x00111111, 0x00454545, 0x001b1b1b, 0x00f5f5f5,
+	0x00e4e4e4, 0x000e0e0e, 0x00737373, 0x00aaaaaa,
+	0x00f1f1f1, 0x00dddddd, 0x00595959, 0x00141414,
+	0x006c6c6c, 0x00929292, 0x00545454, 0x00d0d0d0,
+	0x00787878, 0x00707070, 0x00e3e3e3, 0x00494949,
+	0x00808080, 0x00505050, 0x00a7a7a7, 0x00f6f6f6,
+	0x00777777, 0x00939393, 0x00868686, 0x00838383,
+	0x002a2a2a, 0x00c7c7c7, 0x005b5b5b, 0x00e9e9e9,
+	0x00eeeeee, 0x008f8f8f, 0x00010101, 0x003d3d3d,
 };
 
 static const u32 camellia_sp3033[256] = {
-	0x38003838,0x41004141,0x16001616,0x76007676,
-	0xd900d9d9,0x93009393,0x60006060,0xf200f2f2,
-	0x72007272,0xc200c2c2,0xab00abab,0x9a009a9a,
-	0x75007575,0x06000606,0x57005757,0xa000a0a0,
-	0x91009191,0xf700f7f7,0xb500b5b5,0xc900c9c9,
-	0xa200a2a2,0x8c008c8c,0xd200d2d2,0x90009090,
-	0xf600f6f6,0x07000707,0xa700a7a7,0x27002727,
-	0x8e008e8e,0xb200b2b2,0x49004949,0xde00dede,
-	0x43004343,0x5c005c5c,0xd700d7d7,0xc700c7c7,
-	0x3e003e3e,0xf500f5f5,0x8f008f8f,0x67006767,
-	0x1f001f1f,0x18001818,0x6e006e6e,0xaf00afaf,
-	0x2f002f2f,0xe200e2e2,0x85008585,0x0d000d0d,
-	0x53005353,0xf000f0f0,0x9c009c9c,0x65006565,
-	0xea00eaea,0xa300a3a3,0xae00aeae,0x9e009e9e,
-	0xec00ecec,0x80008080,0x2d002d2d,0x6b006b6b,
-	0xa800a8a8,0x2b002b2b,0x36003636,0xa600a6a6,
-	0xc500c5c5,0x86008686,0x4d004d4d,0x33003333,
-	0xfd00fdfd,0x66006666,0x58005858,0x96009696,
-	0x3a003a3a,0x09000909,0x95009595,0x10001010,
-	0x78007878,0xd800d8d8,0x42004242,0xcc00cccc,
-	0xef00efef,0x26002626,0xe500e5e5,0x61006161,
-	0x1a001a1a,0x3f003f3f,0x3b003b3b,0x82008282,
-	0xb600b6b6,0xdb00dbdb,0xd400d4d4,0x98009898,
-	0xe800e8e8,0x8b008b8b,0x02000202,0xeb00ebeb,
-	0x0a000a0a,0x2c002c2c,0x1d001d1d,0xb000b0b0,
-	0x6f006f6f,0x8d008d8d,0x88008888,0x0e000e0e,
-	0x19001919,0x87008787,0x4e004e4e,0x0b000b0b,
-	0xa900a9a9,0x0c000c0c,0x79007979,0x11001111,
-	0x7f007f7f,0x22002222,0xe700e7e7,0x59005959,
-	0xe100e1e1,0xda00dada,0x3d003d3d,0xc800c8c8,
-	0x12001212,0x04000404,0x74007474,0x54005454,
-	0x30003030,0x7e007e7e,0xb400b4b4,0x28002828,
-	0x55005555,0x68006868,0x50005050,0xbe00bebe,
-	0xd000d0d0,0xc400c4c4,0x31003131,0xcb00cbcb,
-	0x2a002a2a,0xad00adad,0x0f000f0f,0xca00caca,
-	0x70007070,0xff00ffff,0x32003232,0x69006969,
-	0x08000808,0x62006262,0x00000000,0x24002424,
-	0xd100d1d1,0xfb00fbfb,0xba00baba,0xed00eded,
-	0x45004545,0x81008181,0x73007373,0x6d006d6d,
-	0x84008484,0x9f009f9f,0xee00eeee,0x4a004a4a,
-	0xc300c3c3,0x2e002e2e,0xc100c1c1,0x01000101,
-	0xe600e6e6,0x25002525,0x48004848,0x99009999,
-	0xb900b9b9,0xb300b3b3,0x7b007b7b,0xf900f9f9,
-	0xce00cece,0xbf00bfbf,0xdf00dfdf,0x71007171,
-	0x29002929,0xcd00cdcd,0x6c006c6c,0x13001313,
-	0x64006464,0x9b009b9b,0x63006363,0x9d009d9d,
-	0xc000c0c0,0x4b004b4b,0xb700b7b7,0xa500a5a5,
-	0x89008989,0x5f005f5f,0xb100b1b1,0x17001717,
-	0xf400f4f4,0xbc00bcbc,0xd300d3d3,0x46004646,
-	0xcf00cfcf,0x37003737,0x5e005e5e,0x47004747,
-	0x94009494,0xfa00fafa,0xfc00fcfc,0x5b005b5b,
-	0x97009797,0xfe00fefe,0x5a005a5a,0xac00acac,
-	0x3c003c3c,0x4c004c4c,0x03000303,0x35003535,
-	0xf300f3f3,0x23002323,0xb800b8b8,0x5d005d5d,
-	0x6a006a6a,0x92009292,0xd500d5d5,0x21002121,
-	0x44004444,0x51005151,0xc600c6c6,0x7d007d7d,
-	0x39003939,0x83008383,0xdc00dcdc,0xaa00aaaa,
-	0x7c007c7c,0x77007777,0x56005656,0x05000505,
-	0x1b001b1b,0xa400a4a4,0x15001515,0x34003434,
-	0x1e001e1e,0x1c001c1c,0xf800f8f8,0x52005252,
-	0x20002020,0x14001414,0xe900e9e9,0xbd00bdbd,
-	0xdd00dddd,0xe400e4e4,0xa100a1a1,0xe000e0e0,
-	0x8a008a8a,0xf100f1f1,0xd600d6d6,0x7a007a7a,
-	0xbb00bbbb,0xe300e3e3,0x40004040,0x4f004f4f,
+	0x38003838, 0x41004141, 0x16001616, 0x76007676,
+	0xd900d9d9, 0x93009393, 0x60006060, 0xf200f2f2,
+	0x72007272, 0xc200c2c2, 0xab00abab, 0x9a009a9a,
+	0x75007575, 0x06000606, 0x57005757, 0xa000a0a0,
+	0x91009191, 0xf700f7f7, 0xb500b5b5, 0xc900c9c9,
+	0xa200a2a2, 0x8c008c8c, 0xd200d2d2, 0x90009090,
+	0xf600f6f6, 0x07000707, 0xa700a7a7, 0x27002727,
+	0x8e008e8e, 0xb200b2b2, 0x49004949, 0xde00dede,
+	0x43004343, 0x5c005c5c, 0xd700d7d7, 0xc700c7c7,
+	0x3e003e3e, 0xf500f5f5, 0x8f008f8f, 0x67006767,
+	0x1f001f1f, 0x18001818, 0x6e006e6e, 0xaf00afaf,
+	0x2f002f2f, 0xe200e2e2, 0x85008585, 0x0d000d0d,
+	0x53005353, 0xf000f0f0, 0x9c009c9c, 0x65006565,
+	0xea00eaea, 0xa300a3a3, 0xae00aeae, 0x9e009e9e,
+	0xec00ecec, 0x80008080, 0x2d002d2d, 0x6b006b6b,
+	0xa800a8a8, 0x2b002b2b, 0x36003636, 0xa600a6a6,
+	0xc500c5c5, 0x86008686, 0x4d004d4d, 0x33003333,
+	0xfd00fdfd, 0x66006666, 0x58005858, 0x96009696,
+	0x3a003a3a, 0x09000909, 0x95009595, 0x10001010,
+	0x78007878, 0xd800d8d8, 0x42004242, 0xcc00cccc,
+	0xef00efef, 0x26002626, 0xe500e5e5, 0x61006161,
+	0x1a001a1a, 0x3f003f3f, 0x3b003b3b, 0x82008282,
+	0xb600b6b6, 0xdb00dbdb, 0xd400d4d4, 0x98009898,
+	0xe800e8e8, 0x8b008b8b, 0x02000202, 0xeb00ebeb,
+	0x0a000a0a, 0x2c002c2c, 0x1d001d1d, 0xb000b0b0,
+	0x6f006f6f, 0x8d008d8d, 0x88008888, 0x0e000e0e,
+	0x19001919, 0x87008787, 0x4e004e4e, 0x0b000b0b,
+	0xa900a9a9, 0x0c000c0c, 0x79007979, 0x11001111,
+	0x7f007f7f, 0x22002222, 0xe700e7e7, 0x59005959,
+	0xe100e1e1, 0xda00dada, 0x3d003d3d, 0xc800c8c8,
+	0x12001212, 0x04000404, 0x74007474, 0x54005454,
+	0x30003030, 0x7e007e7e, 0xb400b4b4, 0x28002828,
+	0x55005555, 0x68006868, 0x50005050, 0xbe00bebe,
+	0xd000d0d0, 0xc400c4c4, 0x31003131, 0xcb00cbcb,
+	0x2a002a2a, 0xad00adad, 0x0f000f0f, 0xca00caca,
+	0x70007070, 0xff00ffff, 0x32003232, 0x69006969,
+	0x08000808, 0x62006262, 0x00000000, 0x24002424,
+	0xd100d1d1, 0xfb00fbfb, 0xba00baba, 0xed00eded,
+	0x45004545, 0x81008181, 0x73007373, 0x6d006d6d,
+	0x84008484, 0x9f009f9f, 0xee00eeee, 0x4a004a4a,
+	0xc300c3c3, 0x2e002e2e, 0xc100c1c1, 0x01000101,
+	0xe600e6e6, 0x25002525, 0x48004848, 0x99009999,
+	0xb900b9b9, 0xb300b3b3, 0x7b007b7b, 0xf900f9f9,
+	0xce00cece, 0xbf00bfbf, 0xdf00dfdf, 0x71007171,
+	0x29002929, 0xcd00cdcd, 0x6c006c6c, 0x13001313,
+	0x64006464, 0x9b009b9b, 0x63006363, 0x9d009d9d,
+	0xc000c0c0, 0x4b004b4b, 0xb700b7b7, 0xa500a5a5,
+	0x89008989, 0x5f005f5f, 0xb100b1b1, 0x17001717,
+	0xf400f4f4, 0xbc00bcbc, 0xd300d3d3, 0x46004646,
+	0xcf00cfcf, 0x37003737, 0x5e005e5e, 0x47004747,
+	0x94009494, 0xfa00fafa, 0xfc00fcfc, 0x5b005b5b,
+	0x97009797, 0xfe00fefe, 0x5a005a5a, 0xac00acac,
+	0x3c003c3c, 0x4c004c4c, 0x03000303, 0x35003535,
+	0xf300f3f3, 0x23002323, 0xb800b8b8, 0x5d005d5d,
+	0x6a006a6a, 0x92009292, 0xd500d5d5, 0x21002121,
+	0x44004444, 0x51005151, 0xc600c6c6, 0x7d007d7d,
+	0x39003939, 0x83008383, 0xdc00dcdc, 0xaa00aaaa,
+	0x7c007c7c, 0x77007777, 0x56005656, 0x05000505,
+	0x1b001b1b, 0xa400a4a4, 0x15001515, 0x34003434,
+	0x1e001e1e, 0x1c001c1c, 0xf800f8f8, 0x52005252,
+	0x20002020, 0x14001414, 0xe900e9e9, 0xbd00bdbd,
+	0xdd00dddd, 0xe400e4e4, 0xa100a1a1, 0xe000e0e0,
+	0x8a008a8a, 0xf100f1f1, 0xd600d6d6, 0x7a007a7a,
+	0xbb00bbbb, 0xe300e3e3, 0x40004040, 0x4f004f4f,
 };
 
 static const u32 camellia_sp4404[256] = {
-	0x70700070,0x2c2c002c,0xb3b300b3,0xc0c000c0,
-	0xe4e400e4,0x57570057,0xeaea00ea,0xaeae00ae,
-	0x23230023,0x6b6b006b,0x45450045,0xa5a500a5,
-	0xeded00ed,0x4f4f004f,0x1d1d001d,0x92920092,
-	0x86860086,0xafaf00af,0x7c7c007c,0x1f1f001f,
-	0x3e3e003e,0xdcdc00dc,0x5e5e005e,0x0b0b000b,
-	0xa6a600a6,0x39390039,0xd5d500d5,0x5d5d005d,
-	0xd9d900d9,0x5a5a005a,0x51510051,0x6c6c006c,
-	0x8b8b008b,0x9a9a009a,0xfbfb00fb,0xb0b000b0,
-	0x74740074,0x2b2b002b,0xf0f000f0,0x84840084,
-	0xdfdf00df,0xcbcb00cb,0x34340034,0x76760076,
-	0x6d6d006d,0xa9a900a9,0xd1d100d1,0x04040004,
-	0x14140014,0x3a3a003a,0xdede00de,0x11110011,
-	0x32320032,0x9c9c009c,0x53530053,0xf2f200f2,
-	0xfefe00fe,0xcfcf00cf,0xc3c300c3,0x7a7a007a,
-	0x24240024,0xe8e800e8,0x60600060,0x69690069,
-	0xaaaa00aa,0xa0a000a0,0xa1a100a1,0x62620062,
-	0x54540054,0x1e1e001e,0xe0e000e0,0x64640064,
-	0x10100010,0x00000000,0xa3a300a3,0x75750075,
-	0x8a8a008a,0xe6e600e6,0x09090009,0xdddd00dd,
-	0x87870087,0x83830083,0xcdcd00cd,0x90900090,
-	0x73730073,0xf6f600f6,0x9d9d009d,0xbfbf00bf,
-	0x52520052,0xd8d800d8,0xc8c800c8,0xc6c600c6,
-	0x81810081,0x6f6f006f,0x13130013,0x63630063,
-	0xe9e900e9,0xa7a700a7,0x9f9f009f,0xbcbc00bc,
-	0x29290029,0xf9f900f9,0x2f2f002f,0xb4b400b4,
-	0x78780078,0x06060006,0xe7e700e7,0x71710071,
-	0xd4d400d4,0xabab00ab,0x88880088,0x8d8d008d,
-	0x72720072,0xb9b900b9,0xf8f800f8,0xacac00ac,
-	0x36360036,0x2a2a002a,0x3c3c003c,0xf1f100f1,
-	0x40400040,0xd3d300d3,0xbbbb00bb,0x43430043,
-	0x15150015,0xadad00ad,0x77770077,0x80800080,
-	0x82820082,0xecec00ec,0x27270027,0xe5e500e5,
-	0x85850085,0x35350035,0x0c0c000c,0x41410041,
-	0xefef00ef,0x93930093,0x19190019,0x21210021,
-	0x0e0e000e,0x4e4e004e,0x65650065,0xbdbd00bd,
-	0xb8b800b8,0x8f8f008f,0xebeb00eb,0xcece00ce,
-	0x30300030,0x5f5f005f,0xc5c500c5,0x1a1a001a,
-	0xe1e100e1,0xcaca00ca,0x47470047,0x3d3d003d,
-	0x01010001,0xd6d600d6,0x56560056,0x4d4d004d,
-	0x0d0d000d,0x66660066,0xcccc00cc,0x2d2d002d,
-	0x12120012,0x20200020,0xb1b100b1,0x99990099,
-	0x4c4c004c,0xc2c200c2,0x7e7e007e,0x05050005,
-	0xb7b700b7,0x31310031,0x17170017,0xd7d700d7,
-	0x58580058,0x61610061,0x1b1b001b,0x1c1c001c,
-	0x0f0f000f,0x16160016,0x18180018,0x22220022,
-	0x44440044,0xb2b200b2,0xb5b500b5,0x91910091,
-	0x08080008,0xa8a800a8,0xfcfc00fc,0x50500050,
-	0xd0d000d0,0x7d7d007d,0x89890089,0x97970097,
-	0x5b5b005b,0x95950095,0xffff00ff,0xd2d200d2,
-	0xc4c400c4,0x48480048,0xf7f700f7,0xdbdb00db,
-	0x03030003,0xdada00da,0x3f3f003f,0x94940094,
-	0x5c5c005c,0x02020002,0x4a4a004a,0x33330033,
-	0x67670067,0xf3f300f3,0x7f7f007f,0xe2e200e2,
-	0x9b9b009b,0x26260026,0x37370037,0x3b3b003b,
-	0x96960096,0x4b4b004b,0xbebe00be,0x2e2e002e,
-	0x79790079,0x8c8c008c,0x6e6e006e,0x8e8e008e,
-	0xf5f500f5,0xb6b600b6,0xfdfd00fd,0x59590059,
-	0x98980098,0x6a6a006a,0x46460046,0xbaba00ba,
-	0x25250025,0x42420042,0xa2a200a2,0xfafa00fa,
-	0x07070007,0x55550055,0xeeee00ee,0x0a0a000a,
-	0x49490049,0x68680068,0x38380038,0xa4a400a4,
-	0x28280028,0x7b7b007b,0xc9c900c9,0xc1c100c1,
-	0xe3e300e3,0xf4f400f4,0xc7c700c7,0x9e9e009e,
+	0x70700070, 0x2c2c002c, 0xb3b300b3, 0xc0c000c0,
+	0xe4e400e4, 0x57570057, 0xeaea00ea, 0xaeae00ae,
+	0x23230023, 0x6b6b006b, 0x45450045, 0xa5a500a5,
+	0xeded00ed, 0x4f4f004f, 0x1d1d001d, 0x92920092,
+	0x86860086, 0xafaf00af, 0x7c7c007c, 0x1f1f001f,
+	0x3e3e003e, 0xdcdc00dc, 0x5e5e005e, 0x0b0b000b,
+	0xa6a600a6, 0x39390039, 0xd5d500d5, 0x5d5d005d,
+	0xd9d900d9, 0x5a5a005a, 0x51510051, 0x6c6c006c,
+	0x8b8b008b, 0x9a9a009a, 0xfbfb00fb, 0xb0b000b0,
+	0x74740074, 0x2b2b002b, 0xf0f000f0, 0x84840084,
+	0xdfdf00df, 0xcbcb00cb, 0x34340034, 0x76760076,
+	0x6d6d006d, 0xa9a900a9, 0xd1d100d1, 0x04040004,
+	0x14140014, 0x3a3a003a, 0xdede00de, 0x11110011,
+	0x32320032, 0x9c9c009c, 0x53530053, 0xf2f200f2,
+	0xfefe00fe, 0xcfcf00cf, 0xc3c300c3, 0x7a7a007a,
+	0x24240024, 0xe8e800e8, 0x60600060, 0x69690069,
+	0xaaaa00aa, 0xa0a000a0, 0xa1a100a1, 0x62620062,
+	0x54540054, 0x1e1e001e, 0xe0e000e0, 0x64640064,
+	0x10100010, 0x00000000, 0xa3a300a3, 0x75750075,
+	0x8a8a008a, 0xe6e600e6, 0x09090009, 0xdddd00dd,
+	0x87870087, 0x83830083, 0xcdcd00cd, 0x90900090,
+	0x73730073, 0xf6f600f6, 0x9d9d009d, 0xbfbf00bf,
+	0x52520052, 0xd8d800d8, 0xc8c800c8, 0xc6c600c6,
+	0x81810081, 0x6f6f006f, 0x13130013, 0x63630063,
+	0xe9e900e9, 0xa7a700a7, 0x9f9f009f, 0xbcbc00bc,
+	0x29290029, 0xf9f900f9, 0x2f2f002f, 0xb4b400b4,
+	0x78780078, 0x06060006, 0xe7e700e7, 0x71710071,
+	0xd4d400d4, 0xabab00ab, 0x88880088, 0x8d8d008d,
+	0x72720072, 0xb9b900b9, 0xf8f800f8, 0xacac00ac,
+	0x36360036, 0x2a2a002a, 0x3c3c003c, 0xf1f100f1,
+	0x40400040, 0xd3d300d3, 0xbbbb00bb, 0x43430043,
+	0x15150015, 0xadad00ad, 0x77770077, 0x80800080,
+	0x82820082, 0xecec00ec, 0x27270027, 0xe5e500e5,
+	0x85850085, 0x35350035, 0x0c0c000c, 0x41410041,
+	0xefef00ef, 0x93930093, 0x19190019, 0x21210021,
+	0x0e0e000e, 0x4e4e004e, 0x65650065, 0xbdbd00bd,
+	0xb8b800b8, 0x8f8f008f, 0xebeb00eb, 0xcece00ce,
+	0x30300030, 0x5f5f005f, 0xc5c500c5, 0x1a1a001a,
+	0xe1e100e1, 0xcaca00ca, 0x47470047, 0x3d3d003d,
+	0x01010001, 0xd6d600d6, 0x56560056, 0x4d4d004d,
+	0x0d0d000d, 0x66660066, 0xcccc00cc, 0x2d2d002d,
+	0x12120012, 0x20200020, 0xb1b100b1, 0x99990099,
+	0x4c4c004c, 0xc2c200c2, 0x7e7e007e, 0x05050005,
+	0xb7b700b7, 0x31310031, 0x17170017, 0xd7d700d7,
+	0x58580058, 0x61610061, 0x1b1b001b, 0x1c1c001c,
+	0x0f0f000f, 0x16160016, 0x18180018, 0x22220022,
+	0x44440044, 0xb2b200b2, 0xb5b500b5, 0x91910091,
+	0x08080008, 0xa8a800a8, 0xfcfc00fc, 0x50500050,
+	0xd0d000d0, 0x7d7d007d, 0x89890089, 0x97970097,
+	0x5b5b005b, 0x95950095, 0xffff00ff, 0xd2d200d2,
+	0xc4c400c4, 0x48480048, 0xf7f700f7, 0xdbdb00db,
+	0x03030003, 0xdada00da, 0x3f3f003f, 0x94940094,
+	0x5c5c005c, 0x02020002, 0x4a4a004a, 0x33330033,
+	0x67670067, 0xf3f300f3, 0x7f7f007f, 0xe2e200e2,
+	0x9b9b009b, 0x26260026, 0x37370037, 0x3b3b003b,
+	0x96960096, 0x4b4b004b, 0xbebe00be, 0x2e2e002e,
+	0x79790079, 0x8c8c008c, 0x6e6e006e, 0x8e8e008e,
+	0xf5f500f5, 0xb6b600b6, 0xfdfd00fd, 0x59590059,
+	0x98980098, 0x6a6a006a, 0x46460046, 0xbaba00ba,
+	0x25250025, 0x42420042, 0xa2a200a2, 0xfafa00fa,
+	0x07070007, 0x55550055, 0xeeee00ee, 0x0a0a000a,
+	0x49490049, 0x68680068, 0x38380038, 0xa4a400a4,
+	0x28280028, 0x7b7b007b, 0xc9c900c9, 0xc1c100c1,
+	0xe3e300e3, 0xf4f400f4, 0xc7c700c7, 0x9e9e009e,
 };
 
 
@@ -344,7 +344,7 @@
 	lr = (lr << bits) + (rl >> (32 - bits));	\
 	rl = (rl << bits) + (rr >> (32 - bits));	\
 	rr = (rr << bits) + (w0 >> (32 - bits));	\
-    } while(0)
+    } while (0)
 
 #define ROLDQo32(ll, lr, rl, rr, w0, w1, bits)		\
     do {						\
@@ -354,7 +354,7 @@
 	lr = (rl << (bits - 32)) + (rr >> (64 - bits));	\
 	rl = (rr << (bits - 32)) + (w0 >> (64 - bits));	\
 	rr = (w0 << (bits - 32)) + (w1 >> (64 - bits));	\
-    } while(0)
+    } while (0)
 
 #define CAMELLIA_F(xl, xr, kl, kr, yl, yr, il, ir, t0, t1)	\
     do {							\
@@ -373,7 +373,7 @@
 	yl ^= yr;						\
 	yr = ror32(yr, 8);					\
 	yr ^= yl;						\
-    } while(0)
+    } while (0)
 
 #define SUBKEY_L(INDEX) (subkey[(INDEX)*2])
 #define SUBKEY_R(INDEX) (subkey[(INDEX)*2 + 1])
@@ -835,7 +835,7 @@
 static void camellia_setup192(const unsigned char *key, u32 *subkey)
 {
 	unsigned char kk[32];
-	u32 krll, krlr, krrl,krrr;
+	u32 krll, krlr, krrl, krrr;
 
 	memcpy(kk, key, 24);
 	memcpy((unsigned char *)&krll, key+16, 4);
@@ -865,7 +865,7 @@
 	t1 |= lr;							\
 	ll ^= t1;							\
 	rr ^= rol32(t3, 1);						\
-    } while(0)
+    } while (0)
 
 #define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir)		\
     do {								\
@@ -881,12 +881,12 @@
 	ir ^= il ^ kr;							\
 	yl ^= ir;							\
 	yr ^= ror32(il, 8) ^ ir;						\
-    } while(0)
+    } while (0)
 
 /* max = 24: 128bit encrypt, max = 32: 256bit encrypt */
 static void camellia_do_encrypt(const u32 *subkey, u32 *io, unsigned max)
 {
-	u32 il,ir,t0,t1;               /* temporary variables */
+	u32 il, ir, t0, t1;            /* temporary variables */
 
 	/* pre whitening but absorb kw2 */
 	io[0] ^= SUBKEY_L(0);
@@ -894,30 +894,30 @@
 
 	/* main iteration */
 #define ROUNDS(i) do { \
-	CAMELLIA_ROUNDSM(io[0],io[1], \
-			 SUBKEY_L(i + 2),SUBKEY_R(i + 2), \
-			 io[2],io[3],il,ir); \
-	CAMELLIA_ROUNDSM(io[2],io[3], \
-			 SUBKEY_L(i + 3),SUBKEY_R(i + 3), \
-			 io[0],io[1],il,ir); \
-	CAMELLIA_ROUNDSM(io[0],io[1], \
-			 SUBKEY_L(i + 4),SUBKEY_R(i + 4), \
-			 io[2],io[3],il,ir); \
-	CAMELLIA_ROUNDSM(io[2],io[3], \
-			 SUBKEY_L(i + 5),SUBKEY_R(i + 5), \
-			 io[0],io[1],il,ir); \
-	CAMELLIA_ROUNDSM(io[0],io[1], \
-			 SUBKEY_L(i + 6),SUBKEY_R(i + 6), \
-			 io[2],io[3],il,ir); \
-	CAMELLIA_ROUNDSM(io[2],io[3], \
-			 SUBKEY_L(i + 7),SUBKEY_R(i + 7), \
-			 io[0],io[1],il,ir); \
+	CAMELLIA_ROUNDSM(io[0], io[1], \
+			 SUBKEY_L(i + 2), SUBKEY_R(i + 2), \
+			 io[2], io[3], il, ir); \
+	CAMELLIA_ROUNDSM(io[2], io[3], \
+			 SUBKEY_L(i + 3), SUBKEY_R(i + 3), \
+			 io[0], io[1], il, ir); \
+	CAMELLIA_ROUNDSM(io[0], io[1], \
+			 SUBKEY_L(i + 4), SUBKEY_R(i + 4), \
+			 io[2], io[3], il, ir); \
+	CAMELLIA_ROUNDSM(io[2], io[3], \
+			 SUBKEY_L(i + 5), SUBKEY_R(i + 5), \
+			 io[0], io[1], il, ir); \
+	CAMELLIA_ROUNDSM(io[0], io[1], \
+			 SUBKEY_L(i + 6), SUBKEY_R(i + 6), \
+			 io[2], io[3], il, ir); \
+	CAMELLIA_ROUNDSM(io[2], io[3], \
+			 SUBKEY_L(i + 7), SUBKEY_R(i + 7), \
+			 io[0], io[1], il, ir); \
 } while (0)
 #define FLS(i) do { \
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3], \
-		     SUBKEY_L(i + 0),SUBKEY_R(i + 0), \
-		     SUBKEY_L(i + 1),SUBKEY_R(i + 1), \
-		     t0,t1,il,ir); \
+	CAMELLIA_FLS(io[0], io[1], io[2], io[3], \
+		     SUBKEY_L(i + 0), SUBKEY_R(i + 0), \
+		     SUBKEY_L(i + 1), SUBKEY_R(i + 1), \
+		     t0, t1, il, ir); \
 } while (0)
 
 	ROUNDS(0);
@@ -941,7 +941,7 @@
 
 static void camellia_do_decrypt(const u32 *subkey, u32 *io, unsigned i)
 {
-	u32 il,ir,t0,t1;               /* temporary variables */
+	u32 il, ir, t0, t1;            /* temporary variables */
 
 	/* pre whitening but absorb kw2 */
 	io[0] ^= SUBKEY_L(i);
@@ -949,30 +949,30 @@
 
 	/* main iteration */
 #define ROUNDS(i) do { \
-	CAMELLIA_ROUNDSM(io[0],io[1], \
-			 SUBKEY_L(i + 7),SUBKEY_R(i + 7), \
-			 io[2],io[3],il,ir); \
-	CAMELLIA_ROUNDSM(io[2],io[3], \
-			 SUBKEY_L(i + 6),SUBKEY_R(i + 6), \
-			 io[0],io[1],il,ir); \
-	CAMELLIA_ROUNDSM(io[0],io[1], \
-			 SUBKEY_L(i + 5),SUBKEY_R(i + 5), \
-			 io[2],io[3],il,ir); \
-	CAMELLIA_ROUNDSM(io[2],io[3], \
-			 SUBKEY_L(i + 4),SUBKEY_R(i + 4), \
-			 io[0],io[1],il,ir); \
-	CAMELLIA_ROUNDSM(io[0],io[1], \
-			 SUBKEY_L(i + 3),SUBKEY_R(i + 3), \
-			 io[2],io[3],il,ir); \
-	CAMELLIA_ROUNDSM(io[2],io[3], \
-			 SUBKEY_L(i + 2),SUBKEY_R(i + 2), \
-			 io[0],io[1],il,ir); \
+	CAMELLIA_ROUNDSM(io[0], io[1], \
+			 SUBKEY_L(i + 7), SUBKEY_R(i + 7), \
+			 io[2], io[3], il, ir); \
+	CAMELLIA_ROUNDSM(io[2], io[3], \
+			 SUBKEY_L(i + 6), SUBKEY_R(i + 6), \
+			 io[0], io[1], il, ir); \
+	CAMELLIA_ROUNDSM(io[0], io[1], \
+			 SUBKEY_L(i + 5), SUBKEY_R(i + 5), \
+			 io[2], io[3], il, ir); \
+	CAMELLIA_ROUNDSM(io[2], io[3], \
+			 SUBKEY_L(i + 4), SUBKEY_R(i + 4), \
+			 io[0], io[1], il, ir); \
+	CAMELLIA_ROUNDSM(io[0], io[1], \
+			 SUBKEY_L(i + 3), SUBKEY_R(i + 3), \
+			 io[2], io[3], il, ir); \
+	CAMELLIA_ROUNDSM(io[2], io[3], \
+			 SUBKEY_L(i + 2), SUBKEY_R(i + 2), \
+			 io[0], io[1], il, ir); \
 } while (0)
 #define FLS(i) do { \
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3], \
-		     SUBKEY_L(i + 1),SUBKEY_R(i + 1), \
-		     SUBKEY_L(i + 0),SUBKEY_R(i + 0), \
-		     t0,t1,il,ir); \
+	CAMELLIA_FLS(io[0], io[1], io[2], io[3], \
+		     SUBKEY_L(i + 1), SUBKEY_R(i + 1), \
+		     SUBKEY_L(i + 0), SUBKEY_R(i + 0), \
+		     t0, t1, il, ir); \
 } while (0)
 
 	if (i == 32) {
diff --git a/crypto/cast5.c b/crypto/cast5.c
index 8cbe28f..a1d2294 100644
--- a/crypto/cast5.c
+++ b/crypto/cast5.c
@@ -569,12 +569,12 @@
 	0xeaee6801, 0x8db2a283, 0xea8bf59e
 };
 
-#define F1(D,m,r)  (  (I = ((m) + (D))), (I=rol32(I,(r))),   \
-    (((s1[I >> 24] ^ s2[(I>>16)&0xff]) - s3[(I>>8)&0xff]) + s4[I&0xff]) )
-#define F2(D,m,r)  (  (I = ((m) ^ (D))), (I=rol32(I,(r))),   \
-    (((s1[I >> 24] - s2[(I>>16)&0xff]) + s3[(I>>8)&0xff]) ^ s4[I&0xff]) )
-#define F3(D,m,r)  (  (I = ((m) - (D))), (I=rol32(I,(r))),   \
-    (((s1[I >> 24] + s2[(I>>16)&0xff]) ^ s3[(I>>8)&0xff]) - s4[I&0xff]) )
+#define F1(D, m, r)  ((I = ((m) + (D))), (I = rol32(I, (r))),   \
+    (((s1[I >> 24] ^ s2[(I>>16)&0xff]) - s3[(I>>8)&0xff]) + s4[I&0xff]))
+#define F2(D, m, r)  ((I = ((m) ^ (D))), (I = rol32(I, (r))),   \
+    (((s1[I >> 24] - s2[(I>>16)&0xff]) + s3[(I>>8)&0xff]) ^ s4[I&0xff]))
+#define F3(D, m, r)  ((I = ((m) - (D))), (I = rol32(I, (r))),   \
+    (((s1[I >> 24] + s2[(I>>16)&0xff]) ^ s3[(I>>8)&0xff]) - s4[I&0xff]))
 
 
 static void cast5_encrypt(struct crypto_tfm *tfm, u8 *outbuf, const u8 *inbuf)
@@ -694,7 +694,7 @@
 	dst[1] = cpu_to_be32(l);
 }
 
-static void key_schedule(u32 * x, u32 * z, u32 * k)
+static void key_schedule(u32 *x, u32 *z, u32 *k)
 {
 
 #define xi(i)   ((x[(i)/4] >> (8*(3-((i)%4)))) & 0xff)
diff --git a/crypto/cast6.c b/crypto/cast6.c
index 007d02b..e0c15a6 100644
--- a/crypto/cast6.c
+++ b/crypto/cast6.c
@@ -11,7 +11,7 @@
  * under the terms of GNU General Public License as published by the Free
  * Software Foundation; either version 2 of the License, or (at your option)
  * any later version.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
@@ -35,12 +35,12 @@
 	u8 Kr[12][4];
 };
 
-#define F1(D,r,m)  (  (I = ((m) + (D))), (I=rol32(I,(r))),   \
-    (((s1[I >> 24] ^ s2[(I>>16)&0xff]) - s3[(I>>8)&0xff]) + s4[I&0xff]) )
-#define F2(D,r,m)  (  (I = ((m) ^ (D))), (I=rol32(I,(r))),   \
-    (((s1[I >> 24] - s2[(I>>16)&0xff]) + s3[(I>>8)&0xff]) ^ s4[I&0xff]) )
-#define F3(D,r,m)  (  (I = ((m) - (D))), (I=rol32(I,(r))),   \
-    (((s1[I >> 24] + s2[(I>>16)&0xff]) ^ s3[(I>>8)&0xff]) - s4[I&0xff]) )
+#define F1(D, r, m)  ((I = ((m) + (D))), (I = rol32(I, (r))),   \
+    (((s1[I >> 24] ^ s2[(I>>16)&0xff]) - s3[(I>>8)&0xff]) + s4[I&0xff]))
+#define F2(D, r, m)  ((I = ((m) ^ (D))), (I = rol32(I, (r))),   \
+    (((s1[I >> 24] - s2[(I>>16)&0xff]) + s3[(I>>8)&0xff]) ^ s4[I&0xff]))
+#define F3(D, r, m)  ((I = ((m) - (D))), (I = rol32(I, (r))),   \
+    (((s1[I >> 24] + s2[(I>>16)&0xff]) ^ s3[(I>>8)&0xff]) - s4[I&0xff]))
 
 static const u32 s1[256] = {
 	0x30fb40d4, 0x9fa0ff0b, 0x6beccd2f, 0x3f258c7a, 0x1e213f2f,
@@ -312,7 +312,7 @@
 
 static const u32 Tm[24][8] = {
 	{ 0x5a827999, 0xc95c653a, 0x383650db, 0xa7103c7c, 0x15ea281d,
-		0x84c413be, 0xf39dff5f, 0x6277eb00 } , 
+		0x84c413be, 0xf39dff5f, 0x6277eb00 } ,
 	{ 0xd151d6a1, 0x402bc242, 0xaf05ade3, 0x1ddf9984, 0x8cb98525,
 		0xfb9370c6, 0x6a6d5c67, 0xd9474808 } ,
 	{ 0x482133a9, 0xb6fb1f4a, 0x25d50aeb, 0x94aef68c, 0x0388e22d,
@@ -369,7 +369,8 @@
 };
 
 /* forward octave */
-static void W(u32 *key, unsigned int i) {
+static void W(u32 *key, unsigned int i)
+{
 	u32 I;
 	key[6] ^= F1(key[7], Tr[i % 4][0], Tm[i][0]);
 	key[5] ^= F2(key[6], Tr[i % 4][1], Tm[i][1]);
@@ -377,7 +378,7 @@
 	key[3] ^= F1(key[4], Tr[i % 4][3], Tm[i][3]);
 	key[2] ^= F2(key[3], Tr[i % 4][4], Tm[i][4]);
 	key[1] ^= F3(key[2], Tr[i % 4][5], Tm[i][5]);
-	key[0] ^= F1(key[1], Tr[i % 4][6], Tm[i][6]);	
+	key[0] ^= F1(key[1], Tr[i % 4][6], Tm[i][6]);
 	key[7] ^= F2(key[0], Tr[i % 4][7], Tm[i][7]);
 }
 
@@ -393,11 +394,11 @@
 	if (key_len % 4 != 0) {
 		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
 		return -EINVAL;
-	}	
+	}
 
-	memset (p_key, 0, 32);
-	memcpy (p_key, in_key, key_len);
-	
+	memset(p_key, 0, 32);
+	memcpy(p_key, in_key, key_len);
+
 	key[0] = be32_to_cpu(p_key[0]);		/* A */
 	key[1] = be32_to_cpu(p_key[1]);		/* B */
 	key[2] = be32_to_cpu(p_key[2]);		/* C */
@@ -406,18 +407,16 @@
 	key[5] = be32_to_cpu(p_key[5]);		/* F */
 	key[6] = be32_to_cpu(p_key[6]);		/* G */
 	key[7] = be32_to_cpu(p_key[7]);		/* H */
-	
-
 
 	for (i = 0; i < 12; i++) {
-		W (key, 2 * i);
-		W (key, 2 * i + 1);
-		
+		W(key, 2 * i);
+		W(key, 2 * i + 1);
+
 		c->Kr[i][0] = key[0] & 0x1f;
 		c->Kr[i][1] = key[2] & 0x1f;
 		c->Kr[i][2] = key[4] & 0x1f;
 		c->Kr[i][3] = key[6] & 0x1f;
-		
+
 		c->Km[i][0] = key[7];
 		c->Km[i][1] = key[5];
 		c->Km[i][2] = key[3];
@@ -428,21 +427,23 @@
 }
 
 /*forward quad round*/
-static void Q (u32 * block, u8 * Kr, u32 * Km) {
+static void Q(u32 *block, u8 *Kr, u32 *Km)
+{
 	u32 I;
 	block[2] ^= F1(block[3], Kr[0], Km[0]);
 	block[1] ^= F2(block[2], Kr[1], Km[1]);
 	block[0] ^= F3(block[1], Kr[2], Km[2]);
-	block[3] ^= F1(block[0], Kr[3], Km[3]);		
+	block[3] ^= F1(block[0], Kr[3], Km[3]);
 }
 
 /*reverse quad round*/
-static void QBAR (u32 * block, u8 * Kr, u32 * Km) {
+static void QBAR(u32 *block, u8 *Kr, u32 *Km)
+{
 	u32 I;
-        block[3] ^= F1(block[0], Kr[3], Km[3]);
-        block[0] ^= F3(block[1], Kr[2], Km[2]);
-        block[1] ^= F2(block[2], Kr[1], Km[1]);
-        block[2] ^= F1(block[3], Kr[0], Km[0]);
+	block[3] ^= F1(block[0], Kr[3], Km[3]);
+	block[0] ^= F3(block[1], Kr[2], Km[2]);
+	block[1] ^= F2(block[2], Kr[1], Km[1]);
+	block[2] ^= F1(block[3], Kr[0], Km[0]);
 }
 
 static void cast6_encrypt(struct crypto_tfm *tfm, u8 *outbuf, const u8 *inbuf)
@@ -451,64 +452,65 @@
 	const __be32 *src = (const __be32 *)inbuf;
 	__be32 *dst = (__be32 *)outbuf;
 	u32 block[4];
-	u32 * Km; 
-	u8 * Kr;
+	u32 *Km;
+	u8 *Kr;
 
 	block[0] = be32_to_cpu(src[0]);
 	block[1] = be32_to_cpu(src[1]);
 	block[2] = be32_to_cpu(src[2]);
 	block[3] = be32_to_cpu(src[3]);
 
-	Km = c->Km[0]; Kr = c->Kr[0]; Q (block, Kr, Km);
-	Km = c->Km[1]; Kr = c->Kr[1]; Q (block, Kr, Km);
-	Km = c->Km[2]; Kr = c->Kr[2]; Q (block, Kr, Km);
-	Km = c->Km[3]; Kr = c->Kr[3]; Q (block, Kr, Km);
-	Km = c->Km[4]; Kr = c->Kr[4]; Q (block, Kr, Km);
-	Km = c->Km[5]; Kr = c->Kr[5]; Q (block, Kr, Km);
-	Km = c->Km[6]; Kr = c->Kr[6]; QBAR (block, Kr, Km);
-	Km = c->Km[7]; Kr = c->Kr[7]; QBAR (block, Kr, Km);
-	Km = c->Km[8]; Kr = c->Kr[8]; QBAR (block, Kr, Km);
-	Km = c->Km[9]; Kr = c->Kr[9]; QBAR (block, Kr, Km);
-	Km = c->Km[10]; Kr = c->Kr[10]; QBAR (block, Kr, Km);
-	Km = c->Km[11]; Kr = c->Kr[11]; QBAR (block, Kr, Km);
+	Km = c->Km[0]; Kr = c->Kr[0]; Q(block, Kr, Km);
+	Km = c->Km[1]; Kr = c->Kr[1]; Q(block, Kr, Km);
+	Km = c->Km[2]; Kr = c->Kr[2]; Q(block, Kr, Km);
+	Km = c->Km[3]; Kr = c->Kr[3]; Q(block, Kr, Km);
+	Km = c->Km[4]; Kr = c->Kr[4]; Q(block, Kr, Km);
+	Km = c->Km[5]; Kr = c->Kr[5]; Q(block, Kr, Km);
+	Km = c->Km[6]; Kr = c->Kr[6]; QBAR(block, Kr, Km);
+	Km = c->Km[7]; Kr = c->Kr[7]; QBAR(block, Kr, Km);
+	Km = c->Km[8]; Kr = c->Kr[8]; QBAR(block, Kr, Km);
+	Km = c->Km[9]; Kr = c->Kr[9]; QBAR(block, Kr, Km);
+	Km = c->Km[10]; Kr = c->Kr[10]; QBAR(block, Kr, Km);
+	Km = c->Km[11]; Kr = c->Kr[11]; QBAR(block, Kr, Km);
 
 	dst[0] = cpu_to_be32(block[0]);
 	dst[1] = cpu_to_be32(block[1]);
 	dst[2] = cpu_to_be32(block[2]);
 	dst[3] = cpu_to_be32(block[3]);
-}	
+}
 
-static void cast6_decrypt(struct crypto_tfm *tfm, u8 *outbuf, const u8 *inbuf) {
-	struct cast6_ctx * c = crypto_tfm_ctx(tfm);
+static void cast6_decrypt(struct crypto_tfm *tfm, u8 *outbuf, const u8 *inbuf)
+{
+	struct cast6_ctx *c = crypto_tfm_ctx(tfm);
 	const __be32 *src = (const __be32 *)inbuf;
 	__be32 *dst = (__be32 *)outbuf;
 	u32 block[4];
-	u32 * Km; 
-	u8 * Kr;
+	u32 *Km;
+	u8 *Kr;
 
 	block[0] = be32_to_cpu(src[0]);
 	block[1] = be32_to_cpu(src[1]);
 	block[2] = be32_to_cpu(src[2]);
 	block[3] = be32_to_cpu(src[3]);
 
-	Km = c->Km[11]; Kr = c->Kr[11]; Q (block, Kr, Km);
-	Km = c->Km[10]; Kr = c->Kr[10]; Q (block, Kr, Km);
-	Km = c->Km[9]; Kr = c->Kr[9]; Q (block, Kr, Km);
-	Km = c->Km[8]; Kr = c->Kr[8]; Q (block, Kr, Km);
-	Km = c->Km[7]; Kr = c->Kr[7]; Q (block, Kr, Km);
-	Km = c->Km[6]; Kr = c->Kr[6]; Q (block, Kr, Km);
-	Km = c->Km[5]; Kr = c->Kr[5]; QBAR (block, Kr, Km);
-	Km = c->Km[4]; Kr = c->Kr[4]; QBAR (block, Kr, Km);
-	Km = c->Km[3]; Kr = c->Kr[3]; QBAR (block, Kr, Km);
-	Km = c->Km[2]; Kr = c->Kr[2]; QBAR (block, Kr, Km);
-	Km = c->Km[1]; Kr = c->Kr[1]; QBAR (block, Kr, Km);
-	Km = c->Km[0]; Kr = c->Kr[0]; QBAR (block, Kr, Km);
-	
+	Km = c->Km[11]; Kr = c->Kr[11]; Q(block, Kr, Km);
+	Km = c->Km[10]; Kr = c->Kr[10]; Q(block, Kr, Km);
+	Km = c->Km[9]; Kr = c->Kr[9]; Q(block, Kr, Km);
+	Km = c->Km[8]; Kr = c->Kr[8]; Q(block, Kr, Km);
+	Km = c->Km[7]; Kr = c->Kr[7]; Q(block, Kr, Km);
+	Km = c->Km[6]; Kr = c->Kr[6]; Q(block, Kr, Km);
+	Km = c->Km[5]; Kr = c->Kr[5]; QBAR(block, Kr, Km);
+	Km = c->Km[4]; Kr = c->Kr[4]; QBAR(block, Kr, Km);
+	Km = c->Km[3]; Kr = c->Kr[3]; QBAR(block, Kr, Km);
+	Km = c->Km[2]; Kr = c->Kr[2]; QBAR(block, Kr, Km);
+	Km = c->Km[1]; Kr = c->Kr[1]; QBAR(block, Kr, Km);
+	Km = c->Km[0]; Kr = c->Kr[0]; QBAR(block, Kr, Km);
+
 	dst[0] = cpu_to_be32(block[0]);
 	dst[1] = cpu_to_be32(block[1]);
 	dst[2] = cpu_to_be32(block[2]);
 	dst[3] = cpu_to_be32(block[3]);
-}	
+}
 
 static struct crypto_alg alg = {
 	.cra_name = "cast6",
diff --git a/crypto/cipher.c b/crypto/cipher.c
index 9a1a731..39541e0 100644
--- a/crypto/cipher.c
+++ b/crypto/cipher.c
@@ -8,7 +8,7 @@
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option) 
+ * Software Foundation; either version 2 of the License, or (at your option)
  * any later version.
  *
  */
diff --git a/crypto/compress.c b/crypto/compress.c
index 1ee3570..c33f076 100644
--- a/crypto/compress.c
+++ b/crypto/compress.c
@@ -7,7 +7,7 @@
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option) 
+ * Software Foundation; either version 2 of the License, or (at your option)
  * any later version.
  *
  */
@@ -39,7 +39,7 @@
 
 	ops->cot_compress = crypto_compress;
 	ops->cot_decompress = crypto_decompress;
-	
+
 	return 0;
 }
 
diff --git a/crypto/crc32c.c b/crypto/crc32c.c
index 973bc2c..de9e55c 100644
--- a/crypto/crc32c.c
+++ b/crypto/crc32c.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * Cryptographic API.
  *
  * CRC32C chksum
@@ -30,7 +30,7 @@
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option) 
+ * Software Foundation; either version 2 of the License, or (at your option)
  * any later version.
  *
  */
@@ -142,7 +142,7 @@
 }
 
 /*
- * Steps through buffer one byte at at time, calculates reflected 
+ * Steps through buffer one byte at at time, calculates reflected
  * crc using table.
  */
 
diff --git a/crypto/crypto_null.c b/crypto/crypto_null.c
index cb71c91..07a8a96 100644
--- a/crypto/crypto_null.c
+++ b/crypto/crypto_null.c
@@ -1,11 +1,11 @@
-/* 
+/*
  * Cryptographic API.
  *
  * Null algorithms, aka Much Ado About Nothing.
  *
  * These are needed for IPsec, and may be useful in general for
  * testing & debugging.
- * 
+ *
  * The null cipher is compliant with RFC2410.
  *
  * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
@@ -163,7 +163,7 @@
 static int __init crypto_null_mod_init(void)
 {
 	int ret = 0;
-	
+
 	ret = crypto_register_alg(&cipher_null);
 	if (ret < 0)
 		goto out;
@@ -180,7 +180,7 @@
 	if (ret < 0)
 		goto out_unregister_digest;
 
-out:	
+out:
 	return ret;
 
 out_unregister_digest:
diff --git a/crypto/deflate.c b/crypto/deflate.c
index 9128da4..463dc85 100644
--- a/crypto/deflate.c
+++ b/crypto/deflate.c
@@ -1,14 +1,14 @@
-/* 
+/*
  * Cryptographic API.
  *
  * Deflate algorithm (RFC 1951), implemented here primarily for use
  * by IPCOMP (RFC 3173 & RFC 2394).
  *
  * Copyright (c) 2003 James Morris <jmorris@intercode.com.au>
- * 
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option) 
+ * Software Foundation; either version 2 of the License, or (at your option)
  * any later version.
  *
  * FIXME: deflate transforms will require up to a total of about 436k of kernel
@@ -49,7 +49,7 @@
 	struct z_stream_s *stream = &ctx->comp_stream;
 
 	stream->workspace = vmalloc(zlib_deflate_workspacesize());
-	if (!stream->workspace ) {
+	if (!stream->workspace) {
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -61,7 +61,7 @@
 		ret = -EINVAL;
 		goto out_free;
 	}
-out:	
+out:
 	return ret;
 out_free:
 	vfree(stream->workspace);
@@ -74,7 +74,7 @@
 	struct z_stream_s *stream = &ctx->decomp_stream;
 
 	stream->workspace = kzalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
-	if (!stream->workspace ) {
+	if (!stream->workspace) {
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -106,7 +106,7 @@
 {
 	struct deflate_ctx *ctx = crypto_tfm_ctx(tfm);
 	int ret;
-	
+
 	ret = deflate_comp_init(ctx);
 	if (ret)
 		goto out;
@@ -153,11 +153,11 @@
 out:
 	return ret;
 }
- 
+
 static int deflate_decompress(struct crypto_tfm *tfm, const u8 *src,
 			      unsigned int slen, u8 *dst, unsigned int *dlen)
 {
-	
+
 	int ret = 0;
 	struct deflate_ctx *dctx = crypto_tfm_ctx(tfm);
 	struct z_stream_s *stream = &dctx->decomp_stream;
@@ -182,7 +182,7 @@
 	if (ret == Z_OK && !stream->avail_in && stream->avail_out) {
 		u8 zerostuff = 0;
 		stream->next_in = &zerostuff;
-		stream->avail_in = 1; 
+		stream->avail_in = 1;
 		ret = zlib_inflate(stream, Z_FINISH);
 	}
 	if (ret != Z_STREAM_END) {
diff --git a/crypto/des_generic.c b/crypto/des_generic.c
index 5bd3ee3..249f903 100644
--- a/crypto/des_generic.c
+++ b/crypto/des_generic.c
@@ -869,8 +869,7 @@
 
 	if (unlikely(!((K[0] ^ K[2]) | (K[1] ^ K[3])) ||
 		     !((K[2] ^ K[4]) | (K[3] ^ K[5]))) &&
-		     (*flags & CRYPTO_TFM_REQ_WEAK_KEY))
-	{
+		     (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
 		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
 		return -EINVAL;
 	}
diff --git a/crypto/ecb.c b/crypto/ecb.c
index a46838e..935cfef 100644
--- a/crypto/ecb.c
+++ b/crypto/ecb.c
@@ -55,7 +55,7 @@
 
 		do {
 			fn(crypto_cipher_tfm(tfm), wdst, wsrc);
-	
+
 			wsrc += bsize;
 			wdst += bsize;
 		} while ((nbytes -= bsize) >= bsize);
diff --git a/crypto/fcrypt.c b/crypto/fcrypt.c
index b82d61f..c33107e 100644
--- a/crypto/fcrypt.c
+++ b/crypto/fcrypt.c
@@ -60,13 +60,13 @@
 	u32 t = lo & ((1 << n) - 1);				\
 	lo = (lo >> n) | ((hi & ((1 << n) - 1)) << (32 - n));	\
 	hi = (hi >> n) | (t << (24-n));				\
-} while(0)
+} while (0)
 
 /* Rotate right one 64 bit number as a 56 bit number */
 #define ror56_64(k, n)						\
 do {								\
 	k = (k >> n) | ((k & ((1 << n) - 1)) << (56 - n));	\
-} while(0)
+} while (0)
 
 /*
  * Sboxes for Feistel network derived from
@@ -228,7 +228,7 @@
 	union lc4 { __be32 l; u8 c[4]; } u;				\
 	u.l = sched ^ R;						\
 	L ^= sbox0[u.c[0]] ^ sbox1[u.c[1]] ^ sbox2[u.c[2]] ^ sbox3[u.c[3]]; \
-} while(0)
+} while (0)
 
 /*
  * encryptor
diff --git a/crypto/gcm.c b/crypto/gcm.c
index c654713..2f5fbba 100644
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -37,6 +37,19 @@
 	u8 nonce[4];
 };
 
+struct crypto_rfc4543_ctx {
+	struct crypto_aead *child;
+	u8 nonce[4];
+};
+
+struct crypto_rfc4543_req_ctx {
+	u8 auth_tag[16];
+	struct scatterlist cipher[1];
+	struct scatterlist payload[2];
+	struct scatterlist assoc[2];
+	struct aead_request subreq;
+};
+
 struct crypto_gcm_ghash_ctx {
 	unsigned int cryptlen;
 	struct scatterlist *src;
@@ -1047,6 +1060,272 @@
 	.module = THIS_MODULE,
 };
 
+static inline struct crypto_rfc4543_req_ctx *crypto_rfc4543_reqctx(
+	struct aead_request *req)
+{
+	unsigned long align = crypto_aead_alignmask(crypto_aead_reqtfm(req));
+
+	return (void *)PTR_ALIGN((u8 *)aead_request_ctx(req), align + 1);
+}
+
+static int crypto_rfc4543_setkey(struct crypto_aead *parent, const u8 *key,
+				 unsigned int keylen)
+{
+	struct crypto_rfc4543_ctx *ctx = crypto_aead_ctx(parent);
+	struct crypto_aead *child = ctx->child;
+	int err;
+
+	if (keylen < 4)
+		return -EINVAL;
+
+	keylen -= 4;
+	memcpy(ctx->nonce, key + keylen, 4);
+
+	crypto_aead_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+	crypto_aead_set_flags(child, crypto_aead_get_flags(parent) &
+				     CRYPTO_TFM_REQ_MASK);
+	err = crypto_aead_setkey(child, key, keylen);
+	crypto_aead_set_flags(parent, crypto_aead_get_flags(child) &
+				      CRYPTO_TFM_RES_MASK);
+
+	return err;
+}
+
+static int crypto_rfc4543_setauthsize(struct crypto_aead *parent,
+				      unsigned int authsize)
+{
+	struct crypto_rfc4543_ctx *ctx = crypto_aead_ctx(parent);
+
+	if (authsize != 16)
+		return -EINVAL;
+
+	return crypto_aead_setauthsize(ctx->child, authsize);
+}
+
+/* this is the same as crypto_authenc_chain */
+static void crypto_rfc4543_chain(struct scatterlist *head,
+				 struct scatterlist *sg, int chain)
+{
+	if (chain) {
+		head->length += sg->length;
+		sg = scatterwalk_sg_next(sg);
+	}
+
+	if (sg)
+		scatterwalk_sg_chain(head, 2, sg);
+	else
+		sg_mark_end(head);
+}
+
+static struct aead_request *crypto_rfc4543_crypt(struct aead_request *req,
+						 int enc)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct crypto_rfc4543_ctx *ctx = crypto_aead_ctx(aead);
+	struct crypto_rfc4543_req_ctx *rctx = crypto_rfc4543_reqctx(req);
+	struct aead_request *subreq = &rctx->subreq;
+	struct scatterlist *dst = req->dst;
+	struct scatterlist *cipher = rctx->cipher;
+	struct scatterlist *payload = rctx->payload;
+	struct scatterlist *assoc = rctx->assoc;
+	unsigned int authsize = crypto_aead_authsize(aead);
+	unsigned int assoclen = req->assoclen;
+	struct page *dstp;
+	u8 *vdst;
+	u8 *iv = PTR_ALIGN((u8 *)(rctx + 1) + crypto_aead_reqsize(ctx->child),
+			   crypto_aead_alignmask(ctx->child) + 1);
+
+	memcpy(iv, ctx->nonce, 4);
+	memcpy(iv + 4, req->iv, 8);
+
+	/* construct cipher/plaintext */
+	if (enc)
+		memset(rctx->auth_tag, 0, authsize);
+	else
+		scatterwalk_map_and_copy(rctx->auth_tag, dst,
+					 req->cryptlen - authsize,
+					 authsize, 0);
+
+	sg_init_one(cipher, rctx->auth_tag, authsize);
+
+	/* construct the aad */
+	dstp = sg_page(dst);
+	vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + dst->offset;
+
+	sg_init_table(payload, 2);
+	sg_set_buf(payload, req->iv, 8);
+	crypto_rfc4543_chain(payload, dst, vdst == req->iv + 8);
+	assoclen += 8 + req->cryptlen - (enc ? 0 : authsize);
+
+	sg_init_table(assoc, 2);
+	sg_set_page(assoc, sg_page(req->assoc), req->assoc->length,
+		    req->assoc->offset);
+	crypto_rfc4543_chain(assoc, payload, 0);
+
+	aead_request_set_tfm(subreq, ctx->child);
+	aead_request_set_callback(subreq, req->base.flags, req->base.complete,
+				  req->base.data);
+	aead_request_set_crypt(subreq, cipher, cipher, enc ? 0 : authsize, iv);
+	aead_request_set_assoc(subreq, assoc, assoclen);
+
+	return subreq;
+}
+
+static int crypto_rfc4543_encrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct crypto_rfc4543_req_ctx *rctx = crypto_rfc4543_reqctx(req);
+	struct aead_request *subreq;
+	int err;
+
+	subreq = crypto_rfc4543_crypt(req, 1);
+	err = crypto_aead_encrypt(subreq);
+	if (err)
+		return err;
+
+	scatterwalk_map_and_copy(rctx->auth_tag, req->dst, req->cryptlen,
+				 crypto_aead_authsize(aead), 1);
+
+	return 0;
+}
+
+static int crypto_rfc4543_decrypt(struct aead_request *req)
+{
+	req = crypto_rfc4543_crypt(req, 0);
+
+	return crypto_aead_decrypt(req);
+}
+
+static int crypto_rfc4543_init_tfm(struct crypto_tfm *tfm)
+{
+	struct crypto_instance *inst = (void *)tfm->__crt_alg;
+	struct crypto_aead_spawn *spawn = crypto_instance_ctx(inst);
+	struct crypto_rfc4543_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct crypto_aead *aead;
+	unsigned long align;
+
+	aead = crypto_spawn_aead(spawn);
+	if (IS_ERR(aead))
+		return PTR_ERR(aead);
+
+	ctx->child = aead;
+
+	align = crypto_aead_alignmask(aead);
+	align &= ~(crypto_tfm_ctx_alignment() - 1);
+	tfm->crt_aead.reqsize = sizeof(struct crypto_rfc4543_req_ctx) +
+				ALIGN(crypto_aead_reqsize(aead),
+				      crypto_tfm_ctx_alignment()) +
+				align + 16;
+
+	return 0;
+}
+
+static void crypto_rfc4543_exit_tfm(struct crypto_tfm *tfm)
+{
+	struct crypto_rfc4543_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	crypto_free_aead(ctx->child);
+}
+
+static struct crypto_instance *crypto_rfc4543_alloc(struct rtattr **tb)
+{
+	struct crypto_attr_type *algt;
+	struct crypto_instance *inst;
+	struct crypto_aead_spawn *spawn;
+	struct crypto_alg *alg;
+	const char *ccm_name;
+	int err;
+
+	algt = crypto_get_attr_type(tb);
+	err = PTR_ERR(algt);
+	if (IS_ERR(algt))
+		return ERR_PTR(err);
+
+	if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask)
+		return ERR_PTR(-EINVAL);
+
+	ccm_name = crypto_attr_alg_name(tb[1]);
+	err = PTR_ERR(ccm_name);
+	if (IS_ERR(ccm_name))
+		return ERR_PTR(err);
+
+	inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL);
+	if (!inst)
+		return ERR_PTR(-ENOMEM);
+
+	spawn = crypto_instance_ctx(inst);
+	crypto_set_aead_spawn(spawn, inst);
+	err = crypto_grab_aead(spawn, ccm_name, 0,
+			       crypto_requires_sync(algt->type, algt->mask));
+	if (err)
+		goto out_free_inst;
+
+	alg = crypto_aead_spawn_alg(spawn);
+
+	err = -EINVAL;
+
+	/* We only support 16-byte blocks. */
+	if (alg->cra_aead.ivsize != 16)
+		goto out_drop_alg;
+
+	/* Not a stream cipher? */
+	if (alg->cra_blocksize != 1)
+		goto out_drop_alg;
+
+	err = -ENAMETOOLONG;
+	if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME,
+		     "rfc4543(%s)", alg->cra_name) >= CRYPTO_MAX_ALG_NAME ||
+	    snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
+		     "rfc4543(%s)", alg->cra_driver_name) >=
+	    CRYPTO_MAX_ALG_NAME)
+		goto out_drop_alg;
+
+	inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD;
+	inst->alg.cra_flags |= alg->cra_flags & CRYPTO_ALG_ASYNC;
+	inst->alg.cra_priority = alg->cra_priority;
+	inst->alg.cra_blocksize = 1;
+	inst->alg.cra_alignmask = alg->cra_alignmask;
+	inst->alg.cra_type = &crypto_nivaead_type;
+
+	inst->alg.cra_aead.ivsize = 8;
+	inst->alg.cra_aead.maxauthsize = 16;
+
+	inst->alg.cra_ctxsize = sizeof(struct crypto_rfc4543_ctx);
+
+	inst->alg.cra_init = crypto_rfc4543_init_tfm;
+	inst->alg.cra_exit = crypto_rfc4543_exit_tfm;
+
+	inst->alg.cra_aead.setkey = crypto_rfc4543_setkey;
+	inst->alg.cra_aead.setauthsize = crypto_rfc4543_setauthsize;
+	inst->alg.cra_aead.encrypt = crypto_rfc4543_encrypt;
+	inst->alg.cra_aead.decrypt = crypto_rfc4543_decrypt;
+
+	inst->alg.cra_aead.geniv = "seqiv";
+
+out:
+	return inst;
+
+out_drop_alg:
+	crypto_drop_aead(spawn);
+out_free_inst:
+	kfree(inst);
+	inst = ERR_PTR(err);
+	goto out;
+}
+
+static void crypto_rfc4543_free(struct crypto_instance *inst)
+{
+	crypto_drop_spawn(crypto_instance_ctx(inst));
+	kfree(inst);
+}
+
+static struct crypto_template crypto_rfc4543_tmpl = {
+	.name = "rfc4543",
+	.alloc = crypto_rfc4543_alloc,
+	.free = crypto_rfc4543_free,
+	.module = THIS_MODULE,
+};
+
 static int __init crypto_gcm_module_init(void)
 {
 	int err;
@@ -1067,8 +1346,14 @@
 	if (err)
 		goto out_undo_gcm;
 
+	err = crypto_register_template(&crypto_rfc4543_tmpl);
+	if (err)
+		goto out_undo_rfc4106;
+
 	return 0;
 
+out_undo_rfc4106:
+	crypto_unregister_template(&crypto_rfc4106_tmpl);
 out_undo_gcm:
 	crypto_unregister_template(&crypto_gcm_tmpl);
 out_undo_base:
@@ -1081,6 +1366,7 @@
 static void __exit crypto_gcm_module_exit(void)
 {
 	kfree(gcm_zeroes);
+	crypto_unregister_template(&crypto_rfc4543_tmpl);
 	crypto_unregister_template(&crypto_rfc4106_tmpl);
 	crypto_unregister_template(&crypto_gcm_tmpl);
 	crypto_unregister_template(&crypto_gcm_base_tmpl);
@@ -1094,3 +1380,4 @@
 MODULE_AUTHOR("Mikko Herranen <mh1@iki.fi>");
 MODULE_ALIAS("gcm_base");
 MODULE_ALIAS("rfc4106");
+MODULE_ALIAS("rfc4543");
diff --git a/crypto/md5.c b/crypto/md5.c
index 83eb529..9fda213 100644
--- a/crypto/md5.c
+++ b/crypto/md5.c
@@ -16,17 +16,13 @@
  *
  */
 #include <crypto/internal/hash.h>
+#include <crypto/md5.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/types.h>
 #include <asm/byteorder.h>
 
-#define MD5_DIGEST_SIZE		16
-#define MD5_HMAC_BLOCK_SIZE	64
-#define MD5_BLOCK_WORDS		16
-#define MD5_HASH_WORDS		4
-
 #define F1(x, y, z)	(z ^ (x & (y ^ z)))
 #define F2(x, y, z)	F1(z, x, y)
 #define F3(x, y, z)	(x ^ y ^ z)
@@ -35,12 +31,6 @@
 #define MD5STEP(f, w, x, y, z, in, s) \
 	(w += f(x, y, z) + in, w = (w<<s | w>>(32-s)) + x)
 
-struct md5_ctx {
-	u32 hash[MD5_HASH_WORDS];
-	u32 block[MD5_BLOCK_WORDS];
-	u64 byte_count;
-};
-
 static void md5_transform(u32 *hash, u32 const *in)
 {
 	u32 a, b, c, d;
@@ -141,7 +131,7 @@
 	}
 }
 
-static inline void md5_transform_helper(struct md5_ctx *ctx)
+static inline void md5_transform_helper(struct md5_state *ctx)
 {
 	le32_to_cpu_array(ctx->block, sizeof(ctx->block) / sizeof(u32));
 	md5_transform(ctx->hash, ctx->block);
@@ -149,7 +139,7 @@
 
 static int md5_init(struct shash_desc *desc)
 {
-	struct md5_ctx *mctx = shash_desc_ctx(desc);
+	struct md5_state *mctx = shash_desc_ctx(desc);
 
 	mctx->hash[0] = 0x67452301;
 	mctx->hash[1] = 0xefcdab89;
@@ -162,7 +152,7 @@
 
 static int md5_update(struct shash_desc *desc, const u8 *data, unsigned int len)
 {
-	struct md5_ctx *mctx = shash_desc_ctx(desc);
+	struct md5_state *mctx = shash_desc_ctx(desc);
 	const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
 
 	mctx->byte_count += len;
@@ -194,7 +184,7 @@
 
 static int md5_final(struct shash_desc *desc, u8 *out)
 {
-	struct md5_ctx *mctx = shash_desc_ctx(desc);
+	struct md5_state *mctx = shash_desc_ctx(desc);
 	const unsigned int offset = mctx->byte_count & 0x3f;
 	char *p = (char *)mctx->block + offset;
 	int padding = 56 - (offset + 1);
@@ -220,12 +210,30 @@
 	return 0;
 }
 
+static int md5_export(struct shash_desc *desc, void *out)
+{
+	struct md5_state *ctx = shash_desc_ctx(desc);
+
+	memcpy(out, ctx, sizeof(*ctx));
+	return 0;
+}
+
+static int md5_import(struct shash_desc *desc, const void *in)
+{
+	struct md5_state *ctx = shash_desc_ctx(desc);
+
+	memcpy(ctx, in, sizeof(*ctx));
+	return 0;
+}
+
 static struct shash_alg alg = {
 	.digestsize	=	MD5_DIGEST_SIZE,
 	.init		=	md5_init,
 	.update		=	md5_update,
 	.final		=	md5_final,
-	.descsize	=	sizeof(struct md5_ctx),
+	.export		=	md5_export,
+	.import		=	md5_import,
+	.descsize	=	sizeof(struct md5_state),
 	.base		=	{
 		.cra_name	=	"md5",
 		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c
new file mode 100644
index 0000000..8020124
--- /dev/null
+++ b/crypto/pcrypt.c
@@ -0,0 +1,445 @@
+/*
+ * pcrypt - Parallel crypto wrapper.
+ *
+ * Copyright (C) 2009 secunet Security Networks AG
+ * Copyright (C) 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <crypto/algapi.h>
+#include <crypto/internal/aead.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <crypto/pcrypt.h>
+
+static struct padata_instance *pcrypt_enc_padata;
+static struct padata_instance *pcrypt_dec_padata;
+static struct workqueue_struct *encwq;
+static struct workqueue_struct *decwq;
+
+struct pcrypt_instance_ctx {
+	struct crypto_spawn spawn;
+	unsigned int tfm_count;
+};
+
+struct pcrypt_aead_ctx {
+	struct crypto_aead *child;
+	unsigned int cb_cpu;
+};
+
+static int pcrypt_do_parallel(struct padata_priv *padata, unsigned int *cb_cpu,
+			      struct padata_instance *pinst)
+{
+	unsigned int cpu_index, cpu, i;
+
+	cpu = *cb_cpu;
+
+	if (cpumask_test_cpu(cpu, cpu_active_mask))
+			goto out;
+
+	cpu_index = cpu % cpumask_weight(cpu_active_mask);
+
+	cpu = cpumask_first(cpu_active_mask);
+	for (i = 0; i < cpu_index; i++)
+		cpu = cpumask_next(cpu, cpu_active_mask);
+
+	*cb_cpu = cpu;
+
+out:
+	return padata_do_parallel(pinst, padata, cpu);
+}
+
+static int pcrypt_aead_setkey(struct crypto_aead *parent,
+			      const u8 *key, unsigned int keylen)
+{
+	struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(parent);
+
+	return crypto_aead_setkey(ctx->child, key, keylen);
+}
+
+static int pcrypt_aead_setauthsize(struct crypto_aead *parent,
+				   unsigned int authsize)
+{
+	struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(parent);
+
+	return crypto_aead_setauthsize(ctx->child, authsize);
+}
+
+static void pcrypt_aead_serial(struct padata_priv *padata)
+{
+	struct pcrypt_request *preq = pcrypt_padata_request(padata);
+	struct aead_request *req = pcrypt_request_ctx(preq);
+
+	aead_request_complete(req->base.data, padata->info);
+}
+
+static void pcrypt_aead_giv_serial(struct padata_priv *padata)
+{
+	struct pcrypt_request *preq = pcrypt_padata_request(padata);
+	struct aead_givcrypt_request *req = pcrypt_request_ctx(preq);
+
+	aead_request_complete(req->areq.base.data, padata->info);
+}
+
+static void pcrypt_aead_done(struct crypto_async_request *areq, int err)
+{
+	struct aead_request *req = areq->data;
+	struct pcrypt_request *preq = aead_request_ctx(req);
+	struct padata_priv *padata = pcrypt_request_padata(preq);
+
+	padata->info = err;
+	req->base.flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	padata_do_serial(padata);
+}
+
+static void pcrypt_aead_enc(struct padata_priv *padata)
+{
+	struct pcrypt_request *preq = pcrypt_padata_request(padata);
+	struct aead_request *req = pcrypt_request_ctx(preq);
+
+	padata->info = crypto_aead_encrypt(req);
+
+	if (padata->info == -EINPROGRESS)
+		return;
+
+	padata_do_serial(padata);
+}
+
+static int pcrypt_aead_encrypt(struct aead_request *req)
+{
+	int err;
+	struct pcrypt_request *preq = aead_request_ctx(req);
+	struct aead_request *creq = pcrypt_request_ctx(preq);
+	struct padata_priv *padata = pcrypt_request_padata(preq);
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(aead);
+	u32 flags = aead_request_flags(req);
+
+	memset(padata, 0, sizeof(struct padata_priv));
+
+	padata->parallel = pcrypt_aead_enc;
+	padata->serial = pcrypt_aead_serial;
+
+	aead_request_set_tfm(creq, ctx->child);
+	aead_request_set_callback(creq, flags & ~CRYPTO_TFM_REQ_MAY_SLEEP,
+				  pcrypt_aead_done, req);
+	aead_request_set_crypt(creq, req->src, req->dst,
+			       req->cryptlen, req->iv);
+	aead_request_set_assoc(creq, req->assoc, req->assoclen);
+
+	err = pcrypt_do_parallel(padata, &ctx->cb_cpu, pcrypt_enc_padata);
+	if (err)
+		return err;
+	else
+		err = crypto_aead_encrypt(creq);
+
+	return err;
+}
+
+static void pcrypt_aead_dec(struct padata_priv *padata)
+{
+	struct pcrypt_request *preq = pcrypt_padata_request(padata);
+	struct aead_request *req = pcrypt_request_ctx(preq);
+
+	padata->info = crypto_aead_decrypt(req);
+
+	if (padata->info == -EINPROGRESS)
+		return;
+
+	padata_do_serial(padata);
+}
+
+static int pcrypt_aead_decrypt(struct aead_request *req)
+{
+	int err;
+	struct pcrypt_request *preq = aead_request_ctx(req);
+	struct aead_request *creq = pcrypt_request_ctx(preq);
+	struct padata_priv *padata = pcrypt_request_padata(preq);
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(aead);
+	u32 flags = aead_request_flags(req);
+
+	memset(padata, 0, sizeof(struct padata_priv));
+
+	padata->parallel = pcrypt_aead_dec;
+	padata->serial = pcrypt_aead_serial;
+
+	aead_request_set_tfm(creq, ctx->child);
+	aead_request_set_callback(creq, flags & ~CRYPTO_TFM_REQ_MAY_SLEEP,
+				  pcrypt_aead_done, req);
+	aead_request_set_crypt(creq, req->src, req->dst,
+			       req->cryptlen, req->iv);
+	aead_request_set_assoc(creq, req->assoc, req->assoclen);
+
+	err = pcrypt_do_parallel(padata, &ctx->cb_cpu, pcrypt_dec_padata);
+	if (err)
+		return err;
+	else
+		err = crypto_aead_decrypt(creq);
+
+	return err;
+}
+
+static void pcrypt_aead_givenc(struct padata_priv *padata)
+{
+	struct pcrypt_request *preq = pcrypt_padata_request(padata);
+	struct aead_givcrypt_request *req = pcrypt_request_ctx(preq);
+
+	padata->info = crypto_aead_givencrypt(req);
+
+	if (padata->info == -EINPROGRESS)
+		return;
+
+	padata_do_serial(padata);
+}
+
+static int pcrypt_aead_givencrypt(struct aead_givcrypt_request *req)
+{
+	int err;
+	struct aead_request *areq = &req->areq;
+	struct pcrypt_request *preq = aead_request_ctx(areq);
+	struct aead_givcrypt_request *creq = pcrypt_request_ctx(preq);
+	struct padata_priv *padata = pcrypt_request_padata(preq);
+	struct crypto_aead *aead = aead_givcrypt_reqtfm(req);
+	struct pcrypt_aead_ctx *ctx = crypto_aead_ctx(aead);
+	u32 flags = aead_request_flags(areq);
+
+	memset(padata, 0, sizeof(struct padata_priv));
+
+	padata->parallel = pcrypt_aead_givenc;
+	padata->serial = pcrypt_aead_giv_serial;
+
+	aead_givcrypt_set_tfm(creq, ctx->child);
+	aead_givcrypt_set_callback(creq, flags & ~CRYPTO_TFM_REQ_MAY_SLEEP,
+				   pcrypt_aead_done, areq);
+	aead_givcrypt_set_crypt(creq, areq->src, areq->dst,
+				areq->cryptlen, areq->iv);
+	aead_givcrypt_set_assoc(creq, areq->assoc, areq->assoclen);
+	aead_givcrypt_set_giv(creq, req->giv, req->seq);
+
+	err = pcrypt_do_parallel(padata, &ctx->cb_cpu, pcrypt_enc_padata);
+	if (err)
+		return err;
+	else
+		err = crypto_aead_givencrypt(creq);
+
+	return err;
+}
+
+static int pcrypt_aead_init_tfm(struct crypto_tfm *tfm)
+{
+	int cpu, cpu_index;
+	struct crypto_instance *inst = crypto_tfm_alg_instance(tfm);
+	struct pcrypt_instance_ctx *ictx = crypto_instance_ctx(inst);
+	struct pcrypt_aead_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct crypto_aead *cipher;
+
+	ictx->tfm_count++;
+
+	cpu_index = ictx->tfm_count % cpumask_weight(cpu_active_mask);
+
+	ctx->cb_cpu = cpumask_first(cpu_active_mask);
+	for (cpu = 0; cpu < cpu_index; cpu++)
+		ctx->cb_cpu = cpumask_next(ctx->cb_cpu, cpu_active_mask);
+
+	cipher = crypto_spawn_aead(crypto_instance_ctx(inst));
+
+	if (IS_ERR(cipher))
+		return PTR_ERR(cipher);
+
+	ctx->child = cipher;
+	tfm->crt_aead.reqsize = sizeof(struct pcrypt_request)
+		+ sizeof(struct aead_givcrypt_request)
+		+ crypto_aead_reqsize(cipher);
+
+	return 0;
+}
+
+static void pcrypt_aead_exit_tfm(struct crypto_tfm *tfm)
+{
+	struct pcrypt_aead_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	crypto_free_aead(ctx->child);
+}
+
+static struct crypto_instance *pcrypt_alloc_instance(struct crypto_alg *alg)
+{
+	struct crypto_instance *inst;
+	struct pcrypt_instance_ctx *ctx;
+	int err;
+
+	inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL);
+	if (!inst) {
+		inst = ERR_PTR(-ENOMEM);
+		goto out;
+	}
+
+	err = -ENAMETOOLONG;
+	if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME,
+		     "pcrypt(%s)", alg->cra_driver_name) >= CRYPTO_MAX_ALG_NAME)
+		goto out_free_inst;
+
+	memcpy(inst->alg.cra_name, alg->cra_name, CRYPTO_MAX_ALG_NAME);
+
+	ctx = crypto_instance_ctx(inst);
+	err = crypto_init_spawn(&ctx->spawn, alg, inst,
+				CRYPTO_ALG_TYPE_MASK);
+	if (err)
+		goto out_free_inst;
+
+	inst->alg.cra_priority = alg->cra_priority + 100;
+	inst->alg.cra_blocksize = alg->cra_blocksize;
+	inst->alg.cra_alignmask = alg->cra_alignmask;
+
+out:
+	return inst;
+
+out_free_inst:
+	kfree(inst);
+	inst = ERR_PTR(err);
+	goto out;
+}
+
+static struct crypto_instance *pcrypt_alloc_aead(struct rtattr **tb)
+{
+	struct crypto_instance *inst;
+	struct crypto_alg *alg;
+	struct crypto_attr_type *algt;
+
+	algt = crypto_get_attr_type(tb);
+
+	alg = crypto_get_attr_alg(tb, algt->type,
+				  (algt->mask & CRYPTO_ALG_TYPE_MASK));
+	if (IS_ERR(alg))
+		return ERR_CAST(alg);
+
+	inst = pcrypt_alloc_instance(alg);
+	if (IS_ERR(inst))
+		goto out_put_alg;
+
+	inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC;
+	inst->alg.cra_type = &crypto_aead_type;
+
+	inst->alg.cra_aead.ivsize = alg->cra_aead.ivsize;
+	inst->alg.cra_aead.geniv = alg->cra_aead.geniv;
+	inst->alg.cra_aead.maxauthsize = alg->cra_aead.maxauthsize;
+
+	inst->alg.cra_ctxsize = sizeof(struct pcrypt_aead_ctx);
+
+	inst->alg.cra_init = pcrypt_aead_init_tfm;
+	inst->alg.cra_exit = pcrypt_aead_exit_tfm;
+
+	inst->alg.cra_aead.setkey = pcrypt_aead_setkey;
+	inst->alg.cra_aead.setauthsize = pcrypt_aead_setauthsize;
+	inst->alg.cra_aead.encrypt = pcrypt_aead_encrypt;
+	inst->alg.cra_aead.decrypt = pcrypt_aead_decrypt;
+	inst->alg.cra_aead.givencrypt = pcrypt_aead_givencrypt;
+
+out_put_alg:
+	crypto_mod_put(alg);
+	return inst;
+}
+
+static struct crypto_instance *pcrypt_alloc(struct rtattr **tb)
+{
+	struct crypto_attr_type *algt;
+
+	algt = crypto_get_attr_type(tb);
+	if (IS_ERR(algt))
+		return ERR_CAST(algt);
+
+	switch (algt->type & algt->mask & CRYPTO_ALG_TYPE_MASK) {
+	case CRYPTO_ALG_TYPE_AEAD:
+		return pcrypt_alloc_aead(tb);
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static void pcrypt_free(struct crypto_instance *inst)
+{
+	struct pcrypt_instance_ctx *ctx = crypto_instance_ctx(inst);
+
+	crypto_drop_spawn(&ctx->spawn);
+	kfree(inst);
+}
+
+static struct crypto_template pcrypt_tmpl = {
+	.name = "pcrypt",
+	.alloc = pcrypt_alloc,
+	.free = pcrypt_free,
+	.module = THIS_MODULE,
+};
+
+static int __init pcrypt_init(void)
+{
+	encwq = create_workqueue("pencrypt");
+	if (!encwq)
+		goto err;
+
+	decwq = create_workqueue("pdecrypt");
+	if (!decwq)
+		goto err_destroy_encwq;
+
+
+	pcrypt_enc_padata = padata_alloc(cpu_possible_mask, encwq);
+	if (!pcrypt_enc_padata)
+		goto err_destroy_decwq;
+
+	pcrypt_dec_padata = padata_alloc(cpu_possible_mask, decwq);
+	if (!pcrypt_dec_padata)
+		goto err_free_padata;
+
+	padata_start(pcrypt_enc_padata);
+	padata_start(pcrypt_dec_padata);
+
+	return crypto_register_template(&pcrypt_tmpl);
+
+err_free_padata:
+	padata_free(pcrypt_enc_padata);
+
+err_destroy_decwq:
+	destroy_workqueue(decwq);
+
+err_destroy_encwq:
+	destroy_workqueue(encwq);
+
+err:
+	return -ENOMEM;
+}
+
+static void __exit pcrypt_exit(void)
+{
+	padata_stop(pcrypt_enc_padata);
+	padata_stop(pcrypt_dec_padata);
+
+	destroy_workqueue(encwq);
+	destroy_workqueue(decwq);
+
+	padata_free(pcrypt_enc_padata);
+	padata_free(pcrypt_dec_padata);
+
+	crypto_unregister_template(&pcrypt_tmpl);
+}
+
+module_init(pcrypt_init);
+module_exit(pcrypt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steffen Klassert <steffen.klassert@secunet.com>");
+MODULE_DESCRIPTION("Parallel crypto wrapper");
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index 7620bfc..c494d76 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -1477,9 +1477,54 @@
 	return err;
 }
 
+static int alg_test_null(const struct alg_test_desc *desc,
+			     const char *driver, u32 type, u32 mask)
+{
+	return 0;
+}
+
 /* Please keep this list sorted by algorithm name. */
 static const struct alg_test_desc alg_test_descs[] = {
 	{
+		.alg = "__driver-cbc-aes-aesni",
+		.test = alg_test_null,
+		.suite = {
+			.cipher = {
+				.enc = {
+					.vecs = NULL,
+					.count = 0
+				},
+				.dec = {
+					.vecs = NULL,
+					.count = 0
+				}
+			}
+		}
+	}, {
+		.alg = "__driver-ecb-aes-aesni",
+		.test = alg_test_null,
+		.suite = {
+			.cipher = {
+				.enc = {
+					.vecs = NULL,
+					.count = 0
+				},
+				.dec = {
+					.vecs = NULL,
+					.count = 0
+				}
+			}
+		}
+	}, {
+		.alg = "__ghash-pclmulqdqni",
+		.test = alg_test_null,
+		.suite = {
+			.hash = {
+				.vecs = NULL,
+				.count = 0
+			}
+		}
+	}, {
 		.alg = "ansi_cprng",
 		.test = alg_test_cprng,
 		.fips_allowed = 1,
@@ -1623,6 +1668,30 @@
 			}
 		}
 	}, {
+		.alg = "cryptd(__driver-ecb-aes-aesni)",
+		.test = alg_test_null,
+		.suite = {
+			.cipher = {
+				.enc = {
+					.vecs = NULL,
+					.count = 0
+				},
+				.dec = {
+					.vecs = NULL,
+					.count = 0
+				}
+			}
+		}
+	}, {
+		.alg = "cryptd(__ghash-pclmulqdqni)",
+		.test = alg_test_null,
+		.suite = {
+			.hash = {
+				.vecs = NULL,
+				.count = 0
+			}
+		}
+	}, {
 		.alg = "ctr(aes)",
 		.test = alg_test_skcipher,
 		.fips_allowed = 1,
@@ -1669,6 +1738,21 @@
 			}
 		}
 	}, {
+		.alg = "ecb(__aes-aesni)",
+		.test = alg_test_null,
+		.suite = {
+			.cipher = {
+				.enc = {
+					.vecs = NULL,
+					.count = 0
+				},
+				.dec = {
+					.vecs = NULL,
+					.count = 0
+				}
+			}
+		}
+	}, {
 		.alg = "ecb(aes)",
 		.test = alg_test_skcipher,
 		.fips_allowed = 1,
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 0bba148..4ced54f 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -76,12 +76,9 @@
  * evgpe - GPE handling and dispatch
  */
 acpi_status
-acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
-				u8 type);
+acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
 
-acpi_status
-acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info,
-		   u8 write_to_hardware);
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
 
 acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info);
 
@@ -122,9 +119,6 @@
 u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list);
 
 acpi_status
-acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type);
-
-acpi_status
 acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info);
 
 acpi_status acpi_ev_gpe_initialize(void);
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 81e64f47..13cb80c 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -426,6 +426,8 @@
 	struct acpi_gpe_register_info *register_info;	/* Backpointer to register info */
 	u8 flags;		/* Misc info about this GPE */
 	u8 gpe_number;		/* This GPE */
+	u8 runtime_count;
+	u8 wakeup_count;
 };
 
 /* Information about a GPE register pair, one per each status/enable pair in an array */
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 64062b1..07f6e2e 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -287,8 +287,10 @@
 
 struct acpi_object_notify_handler {
 	ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *node;	/* Parent device */
+	u32 handler_type;
 	acpi_notify_handler handler;
 	void *context;
+	struct acpi_object_notify_handler *next;
 };
 
 struct acpi_object_addr_handler {
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index afacf44..0b45346 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -54,54 +54,9 @@
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ev_set_gpe_type
- *
- * PARAMETERS:  gpe_event_info          - GPE to set
- *              Type                    - New type
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Sets the new type for the GPE (wake, run, or wake/run)
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_set_gpe_type(struct acpi_gpe_event_info *gpe_event_info, u8 type)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ev_set_gpe_type);
-
-	/* Validate type and update register enable masks */
-
-	switch (type) {
-	case ACPI_GPE_TYPE_WAKE:
-	case ACPI_GPE_TYPE_RUNTIME:
-	case ACPI_GPE_TYPE_WAKE_RUN:
-		break;
-
-	default:
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
-
-	/* Disable the GPE if currently enabled */
-
-	status = acpi_ev_disable_gpe(gpe_event_info);
-
-	/* Clear the type bits and insert the new Type */
-
-	gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK;
-	gpe_event_info->flags |= type;
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
  * FUNCTION:    acpi_ev_update_gpe_enable_masks
  *
  * PARAMETERS:  gpe_event_info          - GPE to update
- *              Type                    - What to do: ACPI_GPE_DISABLE or
- *                                        ACPI_GPE_ENABLE
  *
  * RETURN:      Status
  *
@@ -110,8 +65,7 @@
  ******************************************************************************/
 
 acpi_status
-acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
-				u8 type)
+acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
 {
 	struct acpi_gpe_register_info *gpe_register_info;
 	u8 register_bit;
@@ -127,37 +81,14 @@
 	    (1 <<
 	     (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
 
-	/* 1) Disable case. Simply clear all enable bits */
+	ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, register_bit);
+	ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
 
-	if (type == ACPI_GPE_DISABLE) {
-		ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
-			       register_bit);
-		ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* 2) Enable case. Set/Clear the appropriate enable bits */
-
-	switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
-	case ACPI_GPE_TYPE_WAKE:
-		ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
-		ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
-		break;
-
-	case ACPI_GPE_TYPE_RUNTIME:
-		ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
-			       register_bit);
+	if (gpe_event_info->runtime_count)
 		ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
-		break;
 
-	case ACPI_GPE_TYPE_WAKE_RUN:
+	if (gpe_event_info->wakeup_count)
 		ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
-		ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
-		break;
-
-	default:
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
 
 	return_ACPI_STATUS(AE_OK);
 }
@@ -167,8 +98,6 @@
  * FUNCTION:    acpi_ev_enable_gpe
  *
  * PARAMETERS:  gpe_event_info          - GPE to enable
- *              write_to_hardware       - Enable now, or just mark data structs
- *                                        (WAKE GPEs should be deferred)
  *
  * RETURN:      Status
  *
@@ -176,9 +105,7 @@
  *
  ******************************************************************************/
 
-acpi_status
-acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info,
-		   u8 write_to_hardware)
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 {
 	acpi_status status;
 
@@ -186,47 +113,20 @@
 
 	/* Make sure HW enable masks are updated */
 
-	status =
-	    acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_ENABLE);
-	if (ACPI_FAILURE(status)) {
+	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+	if (ACPI_FAILURE(status))
 		return_ACPI_STATUS(status);
-	}
 
 	/* Mark wake-enabled or HW enable, or both */
 
-	switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
-	case ACPI_GPE_TYPE_WAKE:
+	if (gpe_event_info->runtime_count) {
+		/* Clear the GPE (of stale events), then enable it */
+		status = acpi_hw_clear_gpe(gpe_event_info);
+		if (ACPI_FAILURE(status))
+			return_ACPI_STATUS(status);
 
-		ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
-		break;
-
-	case ACPI_GPE_TYPE_WAKE_RUN:
-
-		ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
-
-		/*lint -fallthrough */
-
-	case ACPI_GPE_TYPE_RUNTIME:
-
-		ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
-
-		if (write_to_hardware) {
-
-			/* Clear the GPE (of stale events), then enable it */
-
-			status = acpi_hw_clear_gpe(gpe_event_info);
-			if (ACPI_FAILURE(status)) {
-				return_ACPI_STATUS(status);
-			}
-
-			/* Enable the requested runtime GPE */
-
-			status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
-		}
-		break;
-
-	default:
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
+		/* Enable the requested runtime GPE */
+		status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
 	}
 
 	return_ACPI_STATUS(AE_OK);
@@ -252,34 +152,9 @@
 
 	/* Make sure HW enable masks are updated */
 
-	status =
-	    acpi_ev_update_gpe_enable_masks(gpe_event_info, ACPI_GPE_DISABLE);
-	if (ACPI_FAILURE(status)) {
+	status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+	if (ACPI_FAILURE(status))
 		return_ACPI_STATUS(status);
-	}
-
-	/* Clear the appropriate enabled flags for this GPE */
-
-	switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
-	case ACPI_GPE_TYPE_WAKE:
-		ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
-		break;
-
-	case ACPI_GPE_TYPE_WAKE_RUN:
-		ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
-
-		/* fallthrough */
-
-	case ACPI_GPE_TYPE_RUNTIME:
-
-		/* Disable the requested runtime GPE */
-
-		ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
-		break;
-
-	default:
-		break;
-	}
 
 	/*
 	 * Even if we don't know the GPE type, make sure that we always
@@ -521,7 +396,7 @@
 
 	/* Set the GPE flags for return to enabled state */
 
-	(void)acpi_ev_enable_gpe(gpe_event_info, FALSE);
+	(void)acpi_ev_update_gpe_enable_masks(gpe_event_info);
 
 	/*
 	 * Take a snapshot of the GPE info for this level - we copy the info to
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 2479209..3d4c4ac 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -258,7 +258,6 @@
 	u32 gpe_number;
 	char name[ACPI_NAME_SIZE + 1];
 	u8 type;
-	acpi_status status;
 
 	ACPI_FUNCTION_TRACE(ev_save_method_info);
 
@@ -325,26 +324,20 @@
 
 	/*
 	 * Now we can add this information to the gpe_event_info block for use
-	 * during dispatch of this GPE. Default type is RUNTIME, although this may
-	 * change when the _PRW methods are executed later.
+	 * during dispatch of this GPE.
 	 */
 	gpe_event_info =
 	    &gpe_block->event_info[gpe_number - gpe_block->block_base_number];
 
-	gpe_event_info->flags = (u8)
-	    (type | ACPI_GPE_DISPATCH_METHOD | ACPI_GPE_TYPE_RUNTIME);
+	gpe_event_info->flags = (u8) (type | ACPI_GPE_DISPATCH_METHOD);
 
 	gpe_event_info->dispatch.method_node =
 	    (struct acpi_namespace_node *)obj_handle;
 
-	/* Update enable mask, but don't enable the HW GPE as of yet */
-
-	status = acpi_ev_enable_gpe(gpe_event_info, FALSE);
-
 	ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
 			  "Registered GPE method %s as GPE number 0x%.2X\n",
 			  name, gpe_number));
-	return_ACPI_STATUS(status);
+	return_ACPI_STATUS(AE_OK);
 }
 
 /*******************************************************************************
@@ -454,20 +447,7 @@
 							gpe_block->
 							block_base_number];
 
-		/* Mark GPE for WAKE-ONLY but WAKE_DISABLED */
-
-		gpe_event_info->flags &=
-		    ~(ACPI_GPE_WAKE_ENABLED | ACPI_GPE_RUN_ENABLED);
-
-		status =
-		    acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
-		if (ACPI_FAILURE(status)) {
-			goto cleanup;
-		}
-
-		status =
-		    acpi_ev_update_gpe_enable_masks(gpe_event_info,
-						    ACPI_GPE_DISABLE);
+		gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
 	}
 
       cleanup:
@@ -989,7 +969,6 @@
 acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 			     struct acpi_gpe_block_info *gpe_block)
 {
-	acpi_status status;
 	struct acpi_gpe_event_info *gpe_event_info;
 	struct acpi_gpe_walk_info gpe_info;
 	u32 wake_gpe_count;
@@ -1019,42 +998,50 @@
 		gpe_info.gpe_block = gpe_block;
 		gpe_info.gpe_device = gpe_device;
 
-		status =
-		    acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+		acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
 					   ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK,
 					   acpi_ev_match_prw_and_gpe, NULL,
 					   &gpe_info, NULL);
 	}
 
 	/*
-	 * Enable all GPEs in this block that have these attributes:
-	 * 1) are "runtime" or "run/wake" GPEs, and
-	 * 2) have a corresponding _Lxx or _Exx method
-	 *
-	 * Any other GPEs within this block must be enabled via the
-	 * acpi_enable_gpe() external interface.
+	 * Enable all GPEs that have a corresponding method and aren't
+	 * capable of generating wakeups. Any other GPEs within this block
+	 * must be enabled via the acpi_enable_gpe() interface.
 	 */
 	wake_gpe_count = 0;
 	gpe_enabled_count = 0;
+	if (gpe_device == acpi_gbl_fadt_gpe_device)
+		gpe_device = NULL;
 
 	for (i = 0; i < gpe_block->register_count; i++) {
-		for (j = 0; j < 8; j++) {
+		for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
+			acpi_status status;
+			acpi_size gpe_index;
+			int gpe_number;
 
 			/* Get the info block for this particular GPE */
+			gpe_index = (acpi_size)i * ACPI_GPE_REGISTER_WIDTH + j;
+			gpe_event_info = &gpe_block->event_info[gpe_index];
 
-			gpe_event_info = &gpe_block->event_info[((acpi_size) i *
-								 ACPI_GPE_REGISTER_WIDTH)
-								+ j];
-
-			if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
-			     ACPI_GPE_DISPATCH_METHOD) &&
-			    (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) {
-				gpe_enabled_count++;
-			}
-
-			if (gpe_event_info->flags & ACPI_GPE_TYPE_WAKE) {
+			if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
 				wake_gpe_count++;
+				if (acpi_gbl_leave_wake_gpes_disabled)
+					continue;
 			}
+
+			if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD))
+				continue;
+
+			gpe_number = gpe_index + gpe_block->block_base_number;
+			status = acpi_enable_gpe(gpe_device, gpe_number,
+						ACPI_GPE_TYPE_RUNTIME);
+			if (ACPI_FAILURE(status))
+				ACPI_ERROR((AE_INFO,
+						"Failed to enable GPE %02X\n",
+						gpe_number));
+			else
+				gpe_enabled_count++;
 		}
 	}
 
@@ -1062,15 +1049,7 @@
 			  "Found %u Wake, Enabled %u Runtime GPEs in this block\n",
 			  wake_gpe_count, gpe_enabled_count));
 
-	/* Enable all valid runtime GPEs found above */
-
-	status = acpi_hw_enable_runtime_gpe_block(NULL, gpe_block, NULL);
-	if (ACPI_FAILURE(status)) {
-		ACPI_ERROR((AE_INFO, "Could not enable GPEs in GpeBlock %p",
-			    gpe_block));
-	}
-
-	return_ACPI_STATUS(status);
+	return_ACPI_STATUS(AE_OK);
 }
 
 /*******************************************************************************
diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c
index ce224e1..8f0fac6 100644
--- a/drivers/acpi/acpica/evmisc.c
+++ b/drivers/acpi/acpica/evmisc.c
@@ -259,9 +259,15 @@
 
 	handler_obj = notify_info->notify.handler_obj;
 	if (handler_obj) {
-		handler_obj->notify.handler(notify_info->notify.node,
-					    notify_info->notify.value,
-					    handler_obj->notify.context);
+		struct acpi_object_notify_handler *notifier;
+
+		notifier = &handler_obj->notify;
+		while (notifier) {
+			notifier->handler(notify_info->notify.node,
+					  notify_info->notify.value,
+					  notifier->context);
+			notifier = notifier->next;
+		}
 	}
 
 	/* All done with the info object */
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index 2fe0809..474e2ca 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -218,6 +218,72 @@
 
 /*******************************************************************************
  *
+ * FUNCTION:    acpi_populate_handler_object
+ *
+ * PARAMETERS:  handler_obj        - Handler object to populate
+ *              handler_type       - The type of handler:
+ *                                  ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
+ *                                  ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
+ *                                  ACPI_ALL_NOTIFY:  both system and device
+ *              handler            - Address of the handler
+ *              context            - Value passed to the handler on each GPE
+ *              next               - Address of a handler object to link to
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Populate a handler object.
+ *
+ ******************************************************************************/
+static void
+acpi_populate_handler_object(struct acpi_object_notify_handler *handler_obj,
+			     u32 handler_type,
+			     acpi_notify_handler handler, void *context,
+			     struct acpi_object_notify_handler *next)
+{
+	handler_obj->handler_type = handler_type;
+	handler_obj->handler = handler;
+	handler_obj->context = context;
+	handler_obj->next = next;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_add_handler_object
+ *
+ * PARAMETERS:  parent_obj         - Parent of the new object
+ *              handler            - Address of the handler
+ *              context            - Value passed to the handler on each GPE
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new handler object and populate it.
+ *
+ ******************************************************************************/
+static acpi_status
+acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj,
+			acpi_notify_handler handler, void *context)
+{
+	struct acpi_object_notify_handler *handler_obj;
+
+	/* The parent must not be a defice notify handler object. */
+	if (parent_obj->handler_type & ACPI_DEVICE_NOTIFY)
+		return AE_BAD_PARAMETER;
+
+	handler_obj = ACPI_ALLOCATE_ZEROED(sizeof(*handler_obj));
+	if (!handler_obj)
+		return AE_NO_MEMORY;
+
+	acpi_populate_handler_object(handler_obj,
+					ACPI_SYSTEM_NOTIFY,
+					handler, context,
+					parent_obj->next);
+	parent_obj->next = handler_obj;
+
+	return AE_OK;
+}
+
+/*******************************************************************************
+ *
  * FUNCTION:    acpi_install_notify_handler
  *
  * PARAMETERS:  Device          - The device for which notifies will be handled
@@ -316,15 +382,32 @@
 		obj_desc = acpi_ns_get_attached_object(node);
 		if (obj_desc) {
 
-			/* Object exists - make sure there's no handler */
+			/* Object exists. */
 
-			if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
-			     obj_desc->common_notify.system_notify) ||
-			    ((handler_type & ACPI_DEVICE_NOTIFY) &&
-			     obj_desc->common_notify.device_notify)) {
+			/* For a device notify, make sure there's no handler. */
+			if ((handler_type & ACPI_DEVICE_NOTIFY) &&
+			     obj_desc->common_notify.device_notify) {
 				status = AE_ALREADY_EXISTS;
 				goto unlock_and_exit;
 			}
+
+			/* System notifies may have more handlers installed. */
+			notify_obj = obj_desc->common_notify.system_notify;
+
+			if ((handler_type & ACPI_SYSTEM_NOTIFY) && notify_obj) {
+				struct acpi_object_notify_handler *parent_obj;
+
+				if (handler_type & ACPI_DEVICE_NOTIFY) {
+					status = AE_ALREADY_EXISTS;
+					goto unlock_and_exit;
+				}
+
+				parent_obj = &notify_obj->notify;
+				status = acpi_add_handler_object(parent_obj,
+								 handler,
+								 context);
+				goto unlock_and_exit;
+			}
 		} else {
 			/* Create a new object */
 
@@ -356,9 +439,10 @@
 			goto unlock_and_exit;
 		}
 
-		notify_obj->notify.node = node;
-		notify_obj->notify.handler = handler;
-		notify_obj->notify.context = context;
+		acpi_populate_handler_object(&notify_obj->notify,
+						handler_type,
+						handler, context,
+						NULL);
 
 		if (handler_type & ACPI_SYSTEM_NOTIFY) {
 			obj_desc->common_notify.system_notify = notify_obj;
@@ -418,6 +502,10 @@
 		goto exit;
 	}
 
+
+	/* Make sure all deferred tasks are completed */
+	acpi_os_wait_events_complete(NULL);
+
 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE(status)) {
 		goto exit;
@@ -445,15 +533,6 @@
 			goto unlock_and_exit;
 		}
 
-		/* Make sure all deferred tasks are completed */
-
-		(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
-		acpi_os_wait_events_complete(NULL);
-		status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
-		if (ACPI_FAILURE(status)) {
-			goto exit;
-		}
-
 		if (handler_type & ACPI_SYSTEM_NOTIFY) {
 			acpi_gbl_system_notify.node = NULL;
 			acpi_gbl_system_notify.handler = NULL;
@@ -488,28 +567,60 @@
 		/* Object exists - make sure there's an existing handler */
 
 		if (handler_type & ACPI_SYSTEM_NOTIFY) {
+			struct acpi_object_notify_handler *handler_obj;
+			struct acpi_object_notify_handler *parent_obj;
+
 			notify_obj = obj_desc->common_notify.system_notify;
 			if (!notify_obj) {
 				status = AE_NOT_EXIST;
 				goto unlock_and_exit;
 			}
 
-			if (notify_obj->notify.handler != handler) {
+			handler_obj = &notify_obj->notify;
+			parent_obj = NULL;
+			while (handler_obj->handler != handler) {
+				if (handler_obj->next) {
+					parent_obj = handler_obj;
+					handler_obj = handler_obj->next;
+				} else {
+					break;
+				}
+			}
+
+			if (handler_obj->handler != handler) {
 				status = AE_BAD_PARAMETER;
 				goto unlock_and_exit;
 			}
-			/* Make sure all deferred tasks are completed */
 
-			(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
-			acpi_os_wait_events_complete(NULL);
-			status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
-			if (ACPI_FAILURE(status)) {
-				goto exit;
+			/*
+			 * Remove the handler.  There are three possible cases.
+			 * First, we may need to remove a non-embedded object.
+			 * Second, we may need to remove the embedded object's
+			 * handler data, while non-embedded objects exist.
+			 * Finally, we may need to remove the embedded object
+			 * entirely along with its container.
+			 */
+			if (parent_obj) {
+				/* Non-embedded object is being removed. */
+				parent_obj->next = handler_obj->next;
+				ACPI_FREE(handler_obj);
+			} else if (notify_obj->notify.next) {
+				/*
+				 * The handler matches the embedded object, but
+				 * there are more handler objects in the list.
+				 * Replace the embedded object's data with the
+				 * first next object's data and remove that
+				 * object.
+				 */
+				parent_obj = &notify_obj->notify;
+				handler_obj = notify_obj->notify.next;
+				*parent_obj = *handler_obj;
+				ACPI_FREE(handler_obj);
+			} else {
+				/* No more handler objects in the list. */
+				obj_desc->common_notify.system_notify = NULL;
+				acpi_ut_remove_reference(notify_obj);
 			}
-
-			/* Remove the handler */
-			obj_desc->common_notify.system_notify = NULL;
-			acpi_ut_remove_reference(notify_obj);
 		}
 
 		if (handler_type & ACPI_DEVICE_NOTIFY) {
@@ -523,14 +634,6 @@
 				status = AE_BAD_PARAMETER;
 				goto unlock_and_exit;
 			}
-			/* Make sure all deferred tasks are completed */
-
-			(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
-			acpi_os_wait_events_complete(NULL);
-			status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
-			if (ACPI_FAILURE(status)) {
-				goto exit;
-			}
 
 			/* Remove the handler */
 			obj_desc->common_notify.device_notify = NULL;
@@ -617,13 +720,6 @@
 	handler->context = context;
 	handler->method_node = gpe_event_info->dispatch.method_node;
 
-	/* Disable the GPE before installing the handler */
-
-	status = acpi_ev_disable_gpe(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		goto unlock_and_exit;
-	}
-
 	/* Install the handler */
 
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
@@ -707,13 +803,6 @@
 		goto unlock_and_exit;
 	}
 
-	/* Disable the GPE before removing the handler */
-
-	status = acpi_ev_disable_gpe(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		goto unlock_and_exit;
-	}
-
 	/* Make sure all deferred tasks are completed */
 
 	(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index eed7a38..124c157 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -201,67 +201,25 @@
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_set_gpe_type
+ * FUNCTION:    acpi_set_gpe
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device
  *              gpe_number      - GPE level within the GPE block
- *              Type            - New GPE type
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Set the type of an individual GPE
- *
- ******************************************************************************/
-acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type)
-{
-	acpi_status status = AE_OK;
-	struct acpi_gpe_event_info *gpe_event_info;
-
-	ACPI_FUNCTION_TRACE(acpi_set_gpe_type);
-
-	/* Ensure that we have a valid GPE number */
-
-	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
-	if (!gpe_event_info) {
-		status = AE_BAD_PARAMETER;
-		goto unlock_and_exit;
-	}
-
-	if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Set the new type (will disable GPE if currently enabled) */
-
-	status = acpi_ev_set_gpe_type(gpe_event_info, type);
-
-      unlock_and_exit:
-	return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_set_gpe_type)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_enable_gpe
- *
- * PARAMETERS:  gpe_device      - Parent GPE Device
- *              gpe_number      - GPE level within the GPE block
- *              Flags           - Just enable, or also wake enable?
+ *              action          - Enable or disable
  *                                Called from ISR or not
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Enable an ACPI event (general purpose)
+ * DESCRIPTION: Enable or disable an ACPI event (general purpose)
  *
  ******************************************************************************/
-acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
+acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action)
 {
 	acpi_status status = AE_OK;
 	acpi_cpu_flags flags;
 	struct acpi_gpe_event_info *gpe_event_info;
 
-	ACPI_FUNCTION_TRACE(acpi_enable_gpe);
+	ACPI_FUNCTION_TRACE(acpi_set_gpe);
 
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 
@@ -273,15 +231,90 @@
 		goto unlock_and_exit;
 	}
 
-	/* Perform the enable */
+	/* Perform the action */
 
-	status = acpi_ev_enable_gpe(gpe_event_info, TRUE);
+	switch (action) {
+	case ACPI_GPE_ENABLE:
+		status = acpi_ev_enable_gpe(gpe_event_info);
+		break;
+
+	case ACPI_GPE_DISABLE:
+		status = acpi_ev_disable_gpe(gpe_event_info);
+		break;
+
+	default:
+		ACPI_ERROR((AE_INFO, "Invalid action\n"));
+		status = AE_BAD_PARAMETER;
+		break;
+	}
 
       unlock_and_exit:
 	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 	return_ACPI_STATUS(status);
 }
 
+ACPI_EXPORT_SYMBOL(acpi_set_gpe)
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_enable_gpe
+ *
+ * PARAMETERS:  gpe_device      - Parent GPE Device
+ *              gpe_number      - GPE level within the GPE block
+ *              type            - Purpose the GPE will be used for
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take a reference to a GPE and enable it if necessary
+ *
+ ******************************************************************************/
+acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type)
+{
+	acpi_status status = AE_OK;
+	acpi_cpu_flags flags;
+	struct acpi_gpe_event_info *gpe_event_info;
+
+	ACPI_FUNCTION_TRACE(acpi_enable_gpe);
+
+	if (type & ~ACPI_GPE_TYPE_WAKE_RUN)
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+
+	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
+	/* Ensure that we have a valid GPE number */
+
+	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
+	if (!gpe_event_info) {
+		status = AE_BAD_PARAMETER;
+		goto unlock_and_exit;
+	}
+
+	if (type & ACPI_GPE_TYPE_RUNTIME) {
+		if (++gpe_event_info->runtime_count == 1) {
+			status = acpi_ev_enable_gpe(gpe_event_info);
+			if (ACPI_FAILURE(status))
+				gpe_event_info->runtime_count--;
+		}
+	}
+
+	if (type & ACPI_GPE_TYPE_WAKE) {
+		if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
+			status = AE_BAD_PARAMETER;
+			goto unlock_and_exit;
+		}
+
+		/*
+		 * Wake-up GPEs are only enabled right prior to putting the
+		 * system into a sleep state.
+		 */
+		if (++gpe_event_info->wakeup_count == 1)
+			acpi_ev_update_gpe_enable_masks(gpe_event_info);
+	}
+
+unlock_and_exit:
+	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+	return_ACPI_STATUS(status);
+}
 ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
 
 /*******************************************************************************
@@ -290,15 +323,14 @@
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device
  *              gpe_number      - GPE level within the GPE block
- *              Flags           - Just disable, or also wake disable?
- *                                Called from ISR or not
+ *              type            - Purpose the GPE won't be used for any more
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Disable an ACPI event (general purpose)
+ * DESCRIPTION: Release a reference to a GPE and disable it if necessary
  *
  ******************************************************************************/
-acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
+acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type)
 {
 	acpi_status status = AE_OK;
 	acpi_cpu_flags flags;
@@ -306,6 +338,9 @@
 
 	ACPI_FUNCTION_TRACE(acpi_disable_gpe);
 
+	if (type & ~ACPI_GPE_TYPE_WAKE_RUN)
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 	/* Ensure that we have a valid GPE number */
 
@@ -315,13 +350,24 @@
 		goto unlock_and_exit;
 	}
 
-	status = acpi_ev_disable_gpe(gpe_event_info);
+	if ((type & ACPI_GPE_TYPE_RUNTIME) && gpe_event_info->runtime_count) {
+		if (--gpe_event_info->runtime_count == 0)
+			status = acpi_ev_disable_gpe(gpe_event_info);
+	}
+
+	if ((type & ACPI_GPE_TYPE_WAKE) && gpe_event_info->wakeup_count) {
+		/*
+		 * Wake-up GPEs are not enabled after leaving system sleep
+		 * states, so we don't need to disable them here.
+		 */
+		if (--gpe_event_info->wakeup_count == 0)
+			acpi_ev_update_gpe_enable_masks(gpe_event_info);
+	}
 
 unlock_and_exit:
 	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 	return_ACPI_STATUS(status);
 }
-
 ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
 
 /*******************************************************************************
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 8a95e83..f53fbe3 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -422,11 +422,10 @@
 
 	if (device->wakeup.flags.valid) {
 		/* Button's GPE is run-wake GPE */
-		acpi_set_gpe_type(device->wakeup.gpe_device,
-				  device->wakeup.gpe_number,
-				  ACPI_GPE_TYPE_WAKE_RUN);
 		acpi_enable_gpe(device->wakeup.gpe_device,
-				device->wakeup.gpe_number);
+				device->wakeup.gpe_number,
+				ACPI_GPE_TYPE_WAKE_RUN);
+		device->wakeup.run_wake_count++;
 		device->wakeup.state.enabled = 1;
 	}
 
@@ -446,6 +445,14 @@
 {
 	struct acpi_button *button = acpi_driver_data(device);
 
+	if (device->wakeup.flags.valid) {
+		acpi_disable_gpe(device->wakeup.gpe_device,
+				device->wakeup.gpe_number,
+				ACPI_GPE_TYPE_WAKE_RUN);
+		device->wakeup.run_wake_count--;
+		device->wakeup.state.enabled = 0;
+	}
+
 	acpi_button_remove_fs(device);
 	input_unregister_device(button->input);
 	kfree(button);
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index bbc2c13..b2586f5 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -935,6 +935,7 @@
 	struct platform_device *dd;
 
 	id = dock_station_count;
+	memset(&ds, 0, sizeof(ds));
 	dd = platform_device_register_data(NULL, "dock", id, &ds, sizeof(ds));
 	if (IS_ERR(dd))
 		return PTR_ERR(dd);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index d6471bb..27e0b92 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -307,7 +307,11 @@
 	pr_debug(PREFIX "transaction start\n");
 	/* disable GPE during transaction if storm is detected */
 	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
-		acpi_disable_gpe(NULL, ec->gpe);
+		/*
+		 * It has to be disabled at the hardware level regardless of the
+		 * GPE reference counting, so that it doesn't trigger.
+		 */
+		acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
 	}
 
 	status = acpi_ec_transaction_unlocked(ec, t);
@@ -316,8 +320,12 @@
 	ec_check_sci_sync(ec, acpi_ec_read_status(ec));
 	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
 		msleep(1);
-		/* it is safe to enable GPE outside of transaction */
-		acpi_enable_gpe(NULL, ec->gpe);
+		/*
+		 * It is safe to enable the GPE outside of the transaction.  Use
+		 * acpi_set_gpe() for that, since we used it to disable the GPE
+		 * above.
+		 */
+		acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE);
 	} else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
 		pr_info(PREFIX "GPE storm detected, "
 			"transactions will use polling mode\n");
@@ -788,8 +796,8 @@
 				  &acpi_ec_gpe_handler, ec);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
-	acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
-	acpi_enable_gpe(NULL, ec->gpe);
+
+	acpi_enable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
 	status = acpi_install_address_space_handler(ec->handle,
 						    ACPI_ADR_SPACE_EC,
 						    &acpi_ec_space_handler,
@@ -806,6 +814,7 @@
 		} else {
 			acpi_remove_gpe_handler(NULL, ec->gpe,
 				&acpi_ec_gpe_handler);
+			acpi_disable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
 			return -ENODEV;
 		}
 	}
@@ -816,6 +825,7 @@
 
 static void ec_remove_handlers(struct acpi_ec *ec)
 {
+	acpi_disable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
 	if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
 				ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
 		pr_err(PREFIX "failed to remove space handler\n");
@@ -1057,16 +1067,16 @@
 static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state)
 {
 	struct acpi_ec *ec = acpi_driver_data(device);
-	/* Stop using GPE */
-	acpi_disable_gpe(NULL, ec->gpe);
+	/* Stop using the GPE, but keep it reference counted. */
+	acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
 	return 0;
 }
 
 static int acpi_ec_resume(struct acpi_device *device)
 {
 	struct acpi_ec *ec = acpi_driver_data(device);
-	/* Enable use of GPE back */
-	acpi_enable_gpe(NULL, ec->gpe);
+	/* Enable the GPE again, but don't reference count it once more. */
+	acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE);
 	return 0;
 }
 
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index cb28e05..9c4c962 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -36,8 +36,6 @@
 int acpi_power_init(void);
 int acpi_device_sleep_wake(struct acpi_device *dev,
                            int enable, int sleep_state, int dev_state);
-int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state);
-int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 int acpi_power_get_inferred_state(struct acpi_device *device);
 int acpi_power_transition(struct acpi_device *device, int state);
 extern int acpi_power_nocheck;
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
index a5a77b7..2ef0409 100644
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -26,7 +26,9 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/pci-acpi.h>
 #include <linux/acpi.h>
+#include <linux/pm_runtime.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -38,7 +40,13 @@
 	struct pci_dev *dev;
 
 	dev = acpi_get_pci_dev(device->handle);
-	if (!dev || !dev->subordinate)
+	if (!dev)
+		goto out;
+
+	device_set_run_wake(&dev->dev, false);
+	pci_acpi_remove_pm_notifier(device);
+
+	if (!dev->subordinate)
 		goto out;
 
 	acpi_pci_irq_del_prt(dev->subordinate);
@@ -62,6 +70,10 @@
 	if (!dev)
 		return 0;
 
+	pci_acpi_add_pm_notifier(device, dev);
+	if (device->wakeup.flags.run_wake)
+		device_set_run_wake(&dev->dev, true);
+
 	/*
 	 * Install the 'bind' function to facilitate callbacks for
 	 * children of the P2P bridge.
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 64f55b6..d724736 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -30,6 +30,7 @@
 #include <linux/proc_fs.h>
 #include <linux/spinlock.h>
 #include <linux/pm.h>
+#include <linux/pm_runtime.h>
 #include <linux/pci.h>
 #include <linux/pci-acpi.h>
 #include <linux/acpi.h>
@@ -528,6 +529,10 @@
 	if (flags != base_flags)
 		acpi_pci_osc_support(root, flags);
 
+	pci_acpi_add_bus_pm_notifier(device, root->bus);
+	if (device->wakeup.flags.run_wake)
+		device_set_run_wake(root->bus->bridge, true);
+
 	return 0;
 
 end:
@@ -549,6 +554,9 @@
 {
 	struct acpi_pci_root *root = acpi_driver_data(device);
 
+	device_set_run_wake(root->bus->bridge, false);
+	pci_acpi_remove_bus_pm_notifier(device);
+
 	kfree(root);
 	return 0;
 }
@@ -558,6 +566,7 @@
 	if (acpi_pci_disabled)
 		return 0;
 
+	pci_acpi_crs_quirks();
 	if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0)
 		return -ENODEV;
 
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 7c0441f..cc978a8 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -110,6 +110,14 @@
 	  DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
 	  DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
 	 (void *)2},
+	{ set_max_cstate, "Pavilion zv5000", {
+	  DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
+	 (void *)1},
+	{ set_max_cstate, "Asus L8400B", {
+	  DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
+	 (void *)1},
 	{},
 };
 
@@ -872,12 +880,14 @@
 		return(acpi_idle_enter_c1(dev, state));
 
 	local_irq_disable();
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we test
-	 * NEED_RESCHED:
-	 */
-	smp_mb();
+	if (cx->entry_method != ACPI_CSTATE_FFH) {
+		current_thread_info()->status &= ~TS_POLLING;
+		/*
+		 * TS_POLLING-cleared state must be visible before we test
+		 * NEED_RESCHED:
+		 */
+		smp_mb();
+	}
 
 	if (unlikely(need_resched())) {
 		current_thread_info()->status |= TS_POLLING;
@@ -957,12 +967,14 @@
 	}
 
 	local_irq_disable();
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we test
-	 * NEED_RESCHED:
-	 */
-	smp_mb();
+	if (cx->entry_method != ACPI_CSTATE_FFH) {
+		current_thread_info()->status &= ~TS_POLLING;
+		/*
+		 * TS_POLLING-cleared state must be visible before we test
+		 * NEED_RESCHED:
+		 */
+		smp_mb();
+	}
 
 	if (unlikely(need_resched())) {
 		current_thread_info()->status |= TS_POLLING;
diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c
index 7247819..e306ba9 100644
--- a/drivers/acpi/processor_pdc.c
+++ b/drivers/acpi/processor_pdc.c
@@ -125,6 +125,8 @@
 	return status;
 }
 
+static int early_pdc_done;
+
 void acpi_processor_set_pdc(acpi_handle handle)
 {
 	struct acpi_object_list *obj_list;
@@ -132,6 +134,9 @@
 	if (arch_has_acpi_pdc() == false)
 		return;
 
+	if (early_pdc_done)
+		return;
+
 	obj_list = acpi_processor_alloc_pdc();
 	if (!obj_list)
 		return;
@@ -151,6 +156,13 @@
 	return 0;
 }
 
+static int param_early_pdc_optin(char *s)
+{
+	early_pdc_optin = 1;
+	return 1;
+}
+__setup("acpi_early_pdc_eval", param_early_pdc_optin);
+
 static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
 	{
 	set_early_pdc_optin, "HP Envy", {
@@ -192,4 +204,6 @@
 	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
 			    ACPI_UINT32_MAX,
 			    early_init_pdc, NULL, NULL, NULL);
+
+	early_pdc_done = 1;
 }
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 2cabadc..a959f6a 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -413,7 +413,11 @@
 	if (result)
 		goto update_bios;
 
-	return 0;
+	/* We need to call _PPC once when cpufreq starts */
+	if (ignore_ppc != 1)
+		result = acpi_processor_get_platform_limit(pr);
+
+	return result;
 
 	/*
 	 * Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index ff9f622..fb7fc24 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -741,19 +741,40 @@
 	return AE_OK;
 }
 
-static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
+static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
 {
-	acpi_status status = 0;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *package = NULL;
-	int psw_error;
-
 	struct acpi_device_id button_device_ids[] = {
 		{"PNP0C0D", 0},
 		{"PNP0C0C", 0},
 		{"PNP0C0E", 0},
 		{"", 0},
 	};
+	acpi_status status;
+	acpi_event_status event_status;
+
+	device->wakeup.run_wake_count = 0;
+	device->wakeup.flags.notifier_present = 0;
+
+	/* Power button, Lid switch always enable wakeup */
+	if (!acpi_match_device_ids(device, button_device_ids)) {
+		device->wakeup.flags.run_wake = 1;
+		device->wakeup.flags.always_enabled = 1;
+		return;
+	}
+
+	status = acpi_get_gpe_status(NULL, device->wakeup.gpe_number,
+					ACPI_NOT_ISR, &event_status);
+	if (status == AE_OK)
+		device->wakeup.flags.run_wake =
+				!!(event_status & ACPI_EVENT_FLAG_HANDLE);
+}
+
+static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
+{
+	acpi_status status = 0;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *package = NULL;
+	int psw_error;
 
 	/* _PRW */
 	status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer);
@@ -773,6 +794,7 @@
 
 	device->wakeup.flags.valid = 1;
 	device->wakeup.prepare_count = 0;
+	acpi_bus_set_run_wake_flags(device);
 	/* Call _PSW/_DSW object to disable its ability to wake the sleeping
 	 * system for the ACPI device with the _PRW object.
 	 * The _PSW object is depreciated in ACPI 3.0 and is replaced by _DSW.
@@ -784,10 +806,6 @@
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				"error in _DSW or _PSW evaluation\n"));
 
-	/* Power button, Lid switch always enable wakeup */
-	if (!acpi_match_device_ids(device, button_device_ids))
-		device->wakeup.flags.run_wake = 1;
-
 end:
 	if (ACPI_FAILURE(status))
 		device->flags.wake_capable = 0;
@@ -1336,9 +1354,25 @@
 
 	if (child)
 		*child = device;
-	return 0;
+
+	if (device)
+		return 0;
+	else
+		return -ENODEV;
 }
 
+/*
+ * acpi_bus_add and acpi_bus_start
+ *
+ * scan a given ACPI tree and (probably recently hot-plugged)
+ * create and add or starts found devices.
+ *
+ * If no devices were found -ENODEV is returned which does not
+ * mean that this is a real error, there just have been no suitable
+ * ACPI objects in the table trunk from which the kernel could create
+ * a device and add/start an appropriate driver.
+ */
+
 int
 acpi_bus_add(struct acpi_device **child,
 	     struct acpi_device *parent, acpi_handle handle, int type)
@@ -1348,8 +1382,7 @@
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_add = 1;
 
-	acpi_bus_scan(handle, &ops, child);
-	return 0;
+	return acpi_bus_scan(handle, &ops, child);
 }
 EXPORT_SYMBOL(acpi_bus_add);
 
@@ -1357,11 +1390,13 @@
 {
 	struct acpi_bus_ops ops;
 
+	if (!device)
+		return -EINVAL;
+
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_start = 1;
 
-	acpi_bus_scan(device->handle, &ops, NULL);
-	return 0;
+	return acpi_bus_scan(device->handle, &ops, NULL);
 }
 EXPORT_SYMBOL(acpi_bus_start);
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 79d33d9..3bde594 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -745,9 +745,18 @@
 		return -ENODEV;
 	}
 
-	error = enable ?
-		acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
-		acpi_disable_wakeup_device_power(adev);
+	if (enable) {
+		error = acpi_enable_wakeup_device_power(adev,
+						acpi_target_sleep_state);
+		if (!error)
+			acpi_enable_gpe(adev->wakeup.gpe_device,
+					adev->wakeup.gpe_number,
+					ACPI_GPE_TYPE_WAKE);
+	} else {
+		acpi_disable_gpe(adev->wakeup.gpe_device, adev->wakeup.gpe_number,
+				ACPI_GPE_TYPE_WAKE);
+		error = acpi_disable_wakeup_device_power(adev);
+	}
 	if (!error)
 		dev_info(dev, "wake-up capability %s by ACPI\n",
 				enable ? "enabled" : "disabled");
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index d112829..a206a12 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -387,10 +387,10 @@
 	if (index < num_gpes) {
 		if (!strcmp(buf, "disable\n") &&
 				(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_disable_gpe(handle, index);
+			result = acpi_set_gpe(handle, index, ACPI_GPE_DISABLE);
 		else if (!strcmp(buf, "enable\n") &&
 				!(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_enable_gpe(handle, index);
+			result = acpi_set_gpe(handle, index, ACPI_GPE_ENABLE);
 		else if (!strcmp(buf, "clear\n") &&
 				(status & ACPI_EVENT_FLAG_SET))
 			result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR);
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index f336bca7..8a0ed28 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -213,7 +213,7 @@
 	unsigned long table_end;
 	acpi_size tbl_size;
 
-	if (acpi_disabled)
+	if (acpi_disabled && !acpi_ht)
 		return -ENODEV;
 
 	if (!handler)
@@ -280,7 +280,7 @@
 	struct acpi_table_header *table = NULL;
 	acpi_size tbl_size;
 
-	if (acpi_disabled)
+	if (acpi_disabled && !acpi_ht)
 		return -ENODEV;
 
 	if (!handler)
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index e0ee0c0..4b9d339 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -21,12 +21,12 @@
 ACPI_MODULE_NAME("wakeup_devices")
 
 /**
- * acpi_enable_wakeup_device_prep - prepare wakeup devices
- *	@sleep_state:	ACPI state
- * Enable all wakup devices power if the devices' wakeup level
- * is higher than requested sleep level
+ * acpi_enable_wakeup_device_prep - Prepare wake-up devices.
+ * @sleep_state: ACPI system sleep state.
+ *
+ * Enable all wake-up devices' power, unless the requested system sleep state is
+ * too deep.
  */
-
 void acpi_enable_wakeup_device_prep(u8 sleep_state)
 {
 	struct list_head *node, *next;
@@ -36,9 +36,8 @@
 						       struct acpi_device,
 						       wakeup_list);
 
-		if (!dev->wakeup.flags.valid ||
-		    !dev->wakeup.state.enabled ||
-		    (sleep_state > (u32) dev->wakeup.sleep_state))
+		if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
+		    || (sleep_state > (u32) dev->wakeup.sleep_state))
 			continue;
 
 		acpi_enable_wakeup_device_power(dev, sleep_state);
@@ -46,9 +45,12 @@
 }
 
 /**
- * acpi_enable_wakeup_device - enable wakeup devices
- *	@sleep_state:	ACPI state
- * Enable all wakup devices's GPE
+ * acpi_enable_wakeup_device - Enable wake-up device GPEs.
+ * @sleep_state: ACPI system sleep state.
+ *
+ * Enable all wake-up devices' GPEs, with the assumption that
+ * acpi_disable_all_gpes() was executed before, so we don't need to disable any
+ * GPEs here.
  */
 void acpi_enable_wakeup_device(u8 sleep_state)
 {
@@ -65,29 +67,22 @@
 		if (!dev->wakeup.flags.valid)
 			continue;
 
-		/* If users want to disable run-wake GPE,
-		 * we only disable it for wake and leave it for runtime
-		 */
 		if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
-		    || sleep_state > (u32) dev->wakeup.sleep_state) {
-			if (dev->wakeup.flags.run_wake) {
-				/* set_gpe_type will disable GPE, leave it like that */
-				acpi_set_gpe_type(dev->wakeup.gpe_device,
-						  dev->wakeup.gpe_number,
-						  ACPI_GPE_TYPE_RUNTIME);
-			}
+		    || sleep_state > (u32) dev->wakeup.sleep_state)
 			continue;
-		}
-		if (!dev->wakeup.flags.run_wake)
-			acpi_enable_gpe(dev->wakeup.gpe_device,
-					dev->wakeup.gpe_number);
+
+		/* The wake-up power should have been enabled already. */
+		acpi_set_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+				ACPI_GPE_ENABLE);
 	}
 }
 
 /**
- * acpi_disable_wakeup_device - disable devices' wakeup capability
- *	@sleep_state:	ACPI state
- * Disable all wakup devices's GPE and wakeup capability
+ * acpi_disable_wakeup_device - Disable devices' wakeup capability.
+ * @sleep_state: ACPI system sleep state.
+ *
+ * This function only affects devices with wakeup.state.enabled set, which means
+ * that it reverses the changes made by acpi_enable_wakeup_device_prep().
  */
 void acpi_disable_wakeup_device(u8 sleep_state)
 {
@@ -97,30 +92,11 @@
 		struct acpi_device *dev =
 			container_of(node, struct acpi_device, wakeup_list);
 
-		if (!dev->wakeup.flags.valid)
+		if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
+		    || (sleep_state > (u32) dev->wakeup.sleep_state))
 			continue;
 
-		if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count)
-		    || sleep_state > (u32) dev->wakeup.sleep_state) {
-			if (dev->wakeup.flags.run_wake) {
-				acpi_set_gpe_type(dev->wakeup.gpe_device,
-						  dev->wakeup.gpe_number,
-						  ACPI_GPE_TYPE_WAKE_RUN);
-				/* Re-enable it, since set_gpe_type will disable it */
-				acpi_enable_gpe(dev->wakeup.gpe_device,
-						dev->wakeup.gpe_number);
-			}
-			continue;
-		}
-
 		acpi_disable_wakeup_device_power(dev);
-		/* Never disable run-wake GPE */
-		if (!dev->wakeup.flags.run_wake) {
-			acpi_disable_gpe(dev->wakeup.gpe_device,
-					 dev->wakeup.gpe_number);
-			acpi_clear_gpe(dev->wakeup.gpe_device,
-				       dev->wakeup.gpe_number, ACPI_NOT_ISR);
-		}
 	}
 }
 
@@ -134,13 +110,11 @@
 						       struct acpi_device,
 						       wakeup_list);
 		/* In case user doesn't load button driver */
-		if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled)
+		if (!dev->wakeup.flags.always_enabled ||
+		    dev->wakeup.state.enabled)
 			continue;
-		acpi_set_gpe_type(dev->wakeup.gpe_device,
-				  dev->wakeup.gpe_number,
-				  ACPI_GPE_TYPE_WAKE_RUN);
-		acpi_enable_gpe(dev->wakeup.gpe_device,
-				dev->wakeup.gpe_number);
+ 		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+ 				ACPI_GPE_TYPE_WAKE);
 		dev->wakeup.state.enabled = 1;
 	}
 	mutex_unlock(&acpi_device_lock);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b343903..a6a736a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -3082,8 +3082,16 @@
 	ahci_save_initial_config(pdev, hpriv);
 
 	/* prepare host */
-	if (hpriv->cap & HOST_CAP_NCQ)
-		pi.flags |= ATA_FLAG_NCQ | ATA_FLAG_FPDMA_AA;
+	if (hpriv->cap & HOST_CAP_NCQ) {
+		pi.flags |= ATA_FLAG_NCQ;
+		/* Auto-activate optimization is supposed to be supported on
+		   all AHCI controllers indicating NCQ support, but it seems
+		   to be broken at least on some NVIDIA MCP79 chipsets.
+		   Until we get info on which NVIDIA chipsets don't have this
+		   issue, if any, disable AA on all NVIDIA AHCIs. */
+		if (pdev->vendor != PCI_VENDOR_ID_NVIDIA)
+			pi.flags |= ATA_FLAG_FPDMA_AA;
+	}
 
 	if (hpriv->cap & HOST_CAP_PMP)
 		pi.flags |= ATA_FLAG_PMP;
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 161746d..6e2c3b0 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -59,6 +59,8 @@
 	else
 		pr_debug("class '%s' does not have a release() function, "
 			 "be careful\n", class->name);
+
+	kfree(cp);
 }
 
 static struct sysfs_ops class_sysfs_ops = {
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 51042f0ba7..7eff828 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -243,10 +243,12 @@
 static int __devinit virtblk_probe(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk;
+	struct request_queue *q;
 	int err;
 	u64 cap;
-	u32 v;
-	u32 blk_size, sg_elems;
+	u32 v, blk_size, sg_elems, opt_io_size;
+	u16 min_io_size;
+	u8 physical_block_exp, alignment_offset;
 
 	if (index_to_minor(index) >= 1 << MINORBITS)
 		return -ENOSPC;
@@ -293,13 +295,13 @@
 		goto out_mempool;
 	}
 
-	vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock);
-	if (!vblk->disk->queue) {
+	q = vblk->disk->queue = blk_init_queue(do_virtblk_request, &vblk->lock);
+	if (!q) {
 		err = -ENOMEM;
 		goto out_put_disk;
 	}
 
-	vblk->disk->queue->queuedata = vblk;
+	q->queuedata = vblk;
 
 	if (index < 26) {
 		sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26);
@@ -323,10 +325,10 @@
 
 	/* If barriers are supported, tell block layer that queue is ordered */
 	if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
-		blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_DRAIN_FLUSH,
+		blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH,
 				  virtblk_prepare_flush);
 	else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
-		blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
+		blk_queue_ordered(q, QUEUE_ORDERED_TAG, NULL);
 
 	/* If disk is read-only in the host, the guest should obey */
 	if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
@@ -345,14 +347,14 @@
 	set_capacity(vblk->disk, cap);
 
 	/* We can handle whatever the host told us to handle. */
-	blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2);
-	blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2);
+	blk_queue_max_phys_segments(q, vblk->sg_elems-2);
+	blk_queue_max_hw_segments(q, vblk->sg_elems-2);
 
 	/* No need to bounce any requests */
-	blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY);
+	blk_queue_bounce_limit(q, BLK_BOUNCE_ANY);
 
 	/* No real sector limit. */
-	blk_queue_max_sectors(vblk->disk->queue, -1U);
+	blk_queue_max_sectors(q, -1U);
 
 	/* Host can optionally specify maximum segment size and number of
 	 * segments. */
@@ -360,16 +362,45 @@
 				offsetof(struct virtio_blk_config, size_max),
 				&v);
 	if (!err)
-		blk_queue_max_segment_size(vblk->disk->queue, v);
+		blk_queue_max_segment_size(q, v);
 	else
-		blk_queue_max_segment_size(vblk->disk->queue, -1U);
+		blk_queue_max_segment_size(q, -1U);
 
 	/* Host can optionally specify the block size of the device */
 	err = virtio_config_val(vdev, VIRTIO_BLK_F_BLK_SIZE,
 				offsetof(struct virtio_blk_config, blk_size),
 				&blk_size);
 	if (!err)
-		blk_queue_logical_block_size(vblk->disk->queue, blk_size);
+		blk_queue_logical_block_size(q, blk_size);
+	else
+		blk_size = queue_logical_block_size(q);
+
+	/* Use topology information if available */
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+			offsetof(struct virtio_blk_config, physical_block_exp),
+			&physical_block_exp);
+	if (!err && physical_block_exp)
+		blk_queue_physical_block_size(q,
+				blk_size * (1 << physical_block_exp));
+
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+			offsetof(struct virtio_blk_config, alignment_offset),
+			&alignment_offset);
+	if (!err && alignment_offset)
+		blk_queue_alignment_offset(q, blk_size * alignment_offset);
+
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+			offsetof(struct virtio_blk_config, min_io_size),
+			&min_io_size);
+	if (!err && min_io_size)
+		blk_queue_io_min(q, blk_size * min_io_size);
+
+	err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
+			offsetof(struct virtio_blk_config, opt_io_size),
+			&opt_io_size);
+	if (!err && opt_io_size)
+		blk_queue_io_opt(q, blk_size * opt_io_size);
+
 
 	add_disk(vblk->disk);
 	return 0;
@@ -412,7 +443,7 @@
 static unsigned int features[] = {
 	VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
 	VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE,
-	VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH
+	VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH, VIRTIO_BLK_F_TOPOLOGY
 };
 
 /*
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index e023682..3141dd3 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -666,6 +666,14 @@
 	help
 	  Virtio console for use with lguest and other hypervisors.
 
+	  Also serves as a general-purpose serial device for data
+	  transfer between the guest and host.  Character devices at
+	  /dev/vportNpn will be created when corresponding ports are
+	  found, where N is the device number and n is the port number
+	  within that device.  If specified by the host, a sysfs
+	  attribute called 'name' will be populated with a name for
+	  the port which can be used by udev scripts to create a
+	  symlink to the device.
 
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
diff --git a/drivers/char/hvc_beat.c b/drivers/char/hvc_beat.c
index 0afc8b8..5fe4631 100644
--- a/drivers/char/hvc_beat.c
+++ b/drivers/char/hvc_beat.c
@@ -84,7 +84,7 @@
 	return cnt;
 }
 
-static struct hv_ops hvc_beat_get_put_ops = {
+static const struct hv_ops hvc_beat_get_put_ops = {
 	.get_chars = hvc_beat_get_chars,
 	.put_chars = hvc_beat_put_chars,
 };
@@ -99,7 +99,7 @@
 
 static int __init hvc_beat_console_init(void)
 {
-	if (hvc_beat_useit && machine_is_compatible("Beat")) {
+	if (hvc_beat_useit && of_machine_is_compatible("Beat")) {
 		hvc_instantiate(0, 0, &hvc_beat_get_put_ops);
 	}
 	return 0;
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 416d342..d8dac58 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -125,7 +125,7 @@
  * console interfaces but can still be used as a tty device.  This has to be
  * static because kmalloc will not work during early console init.
  */
-static struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES];
+static const struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES];
 static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] =
 	{[0 ... MAX_NR_HVC_CONSOLES - 1] = -1};
 
@@ -247,7 +247,7 @@
  * vty adapters do NOT get an hvc_instantiate() callback since they
  * appear after early console init.
  */
-int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops)
+int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops)
 {
 	struct hvc_struct *hp;
 
@@ -749,7 +749,8 @@
 };
 
 struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data,
-					struct hv_ops *ops, int outbuf_size)
+				       const struct hv_ops *ops,
+				       int outbuf_size)
 {
 	struct hvc_struct *hp;
 	int i;
diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h
index 10950ca..52ddf4d 100644
--- a/drivers/char/hvc_console.h
+++ b/drivers/char/hvc_console.h
@@ -55,7 +55,7 @@
 	int outbuf_size;
 	int n_outbuf;
 	uint32_t vtermno;
-	struct hv_ops *ops;
+	const struct hv_ops *ops;
 	int irq_requested;
 	int data;
 	struct winsize ws;
@@ -76,11 +76,12 @@
 };
 
 /* Register a vterm and a slot index for use as a console (console_init) */
-extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops);
+extern int hvc_instantiate(uint32_t vtermno, int index,
+			   const struct hv_ops *ops);
 
 /* register a vterm for hvc tty operation (module_init or hotplug add) */
 extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int data,
-				struct hv_ops *ops, int outbuf_size);
+				const struct hv_ops *ops, int outbuf_size);
 /* remove a vterm from hvc tty operation (module_exit or hotplug remove) */
 extern int hvc_remove(struct hvc_struct *hp);
 
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index 936d05b..fd02426 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -197,7 +197,7 @@
 	return sent;
 }
 
-static struct hv_ops hvc_get_put_ops = {
+static const struct hv_ops hvc_get_put_ops = {
 	.get_chars = get_chars,
 	.put_chars = put_chars,
 	.notifier_add = notifier_add_irq,
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index fe62bd0..21681a8 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -922,7 +922,7 @@
 
 
 /* HVC operations */
-static struct hv_ops hvc_iucv_ops = {
+static const struct hv_ops hvc_iucv_ops = {
 	.get_chars = hvc_iucv_get_chars,
 	.put_chars = hvc_iucv_put_chars,
 	.notifier_add = hvc_iucv_notifier_add,
diff --git a/drivers/char/hvc_rtas.c b/drivers/char/hvc_rtas.c
index 88590d0..61c4a61 100644
--- a/drivers/char/hvc_rtas.c
+++ b/drivers/char/hvc_rtas.c
@@ -71,7 +71,7 @@
 	return i;
 }
 
-static struct hv_ops hvc_rtas_get_put_ops = {
+static const struct hv_ops hvc_rtas_get_put_ops = {
 	.get_chars = hvc_rtas_read_console,
 	.put_chars = hvc_rtas_write_console,
 };
diff --git a/drivers/char/hvc_udbg.c b/drivers/char/hvc_udbg.c
index bd63ba8..b0957e6 100644
--- a/drivers/char/hvc_udbg.c
+++ b/drivers/char/hvc_udbg.c
@@ -58,7 +58,7 @@
 	return i;
 }
 
-static struct hv_ops hvc_udbg_ops = {
+static const struct hv_ops hvc_udbg_ops = {
 	.get_chars = hvc_udbg_get,
 	.put_chars = hvc_udbg_put,
 };
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index 10be343..27370e9 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -77,7 +77,7 @@
 	return got;
 }
 
-static struct hv_ops hvc_get_put_ops = {
+static const struct hv_ops hvc_get_put_ops = {
 	.get_chars = filtered_get_chars,
 	.put_chars = hvc_put_chars,
 	.notifier_add = notifier_add_irq,
diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c
index b1a7163..60446f8 100644
--- a/drivers/char/hvc_xen.c
+++ b/drivers/char/hvc_xen.c
@@ -122,7 +122,7 @@
 	return recv;
 }
 
-static struct hv_ops hvc_ops = {
+static const struct hv_ops hvc_ops = {
 	.get_chars = read_console,
 	.put_chars = write_console,
 	.notifier_add = notifier_add_irq,
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 8706026..6ea1014 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -186,3 +186,15 @@
 	  module will be called mxc-rnga.
 
 	  If unsure, say Y.
+
+config HW_RANDOM_NOMADIK
+	tristate "ST-Ericsson Nomadik Random Number Generator support"
+	depends on HW_RANDOM && PLAT_NOMADIK
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on ST-Ericsson SoCs (8815 and 8500).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nomadik-rng.
+
+	  If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 5eeb130..4273308 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -18,3 +18,4 @@
 obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
 obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
 obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
+obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
new file mode 100644
index 0000000..a8b4c40
--- /dev/null
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -0,0 +1,103 @@
+/*
+ * Nomadik RNG support
+ *  Copyright 2009 Alessandro Rubini
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+static int nmk_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+	void __iomem *base = (void __iomem *)rng->priv;
+
+	/*
+	 * The register is 32 bits and gives 16 random bits (low half).
+	 * A subsequent read will delay the core for 400ns, so we just read
+	 * once and accept the very unlikely very small delay, even if wait==0.
+	 */
+	*(u16 *)data = __raw_readl(base + 8) & 0xffff;
+	return 2;
+}
+
+/* we have at most one RNG per machine, granted */
+static struct hwrng nmk_rng = {
+	.name		= "nomadik",
+	.read		= nmk_rng_read,
+};
+
+static int nmk_rng_probe(struct amba_device *dev, struct amba_id *id)
+{
+	void __iomem *base;
+	int ret;
+
+	ret = amba_request_regions(dev, dev->dev.init_name);
+	if (ret)
+		return ret;
+	ret = -ENOMEM;
+	base = ioremap(dev->res.start, resource_size(&dev->res));
+	if (!base)
+		goto out_release;
+	nmk_rng.priv = (unsigned long)base;
+	ret = hwrng_register(&nmk_rng);
+	if (ret)
+		goto out_unmap;
+	return 0;
+
+out_unmap:
+	iounmap(base);
+out_release:
+	amba_release_regions(dev);
+	return ret;
+}
+
+static int nmk_rng_remove(struct amba_device *dev)
+{
+	void __iomem *base = (void __iomem *)nmk_rng.priv;
+	hwrng_unregister(&nmk_rng);
+	iounmap(base);
+	amba_release_regions(dev);
+	return 0;
+}
+
+static struct amba_id nmk_rng_ids[] = {
+	{
+		.id	= 0x000805e1,
+		.mask	= 0x000fffff, /* top bits are rev and cfg: accept all */
+	},
+	{0, 0},
+};
+
+static struct amba_driver nmk_rng_driver = {
+	.drv = {
+		.owner = THIS_MODULE,
+		.name = "rng",
+		},
+	.probe = nmk_rng_probe,
+	.remove = nmk_rng_remove,
+	.id_table = nmk_rng_ids,
+};
+
+static int __init nmk_rng_init(void)
+{
+	return amba_driver_register(&nmk_rng_driver);
+}
+
+static void __devexit nmk_rng_exit(void)
+{
+	amba_driver_unregister(&nmk_rng_driver);
+}
+
+module_init(nmk_rng_init);
+module_exit(nmk_rng_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index a035ae3..213373b 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1,18 +1,6 @@
-/*D:300
- * The Guest console driver
- *
- * Writing console drivers is one of the few remaining Dark Arts in Linux.
- * Fortunately for us, the path of virtual consoles has been well-trodden by
- * the PowerPC folks, who wrote "hvc_console.c" to generically support any
- * virtual console.  We use that infrastructure which only requires us to write
- * the basic put_chars and get_chars functions and call the right register
- * functions.
- :*/
-
-/*M:002 The console can be flooded: while the Guest is processing input the
- * Host can send more.  Buffering in the Host could alleviate this, but it is a
- * difficult problem in general. :*/
-/* Copyright (C) 2006, 2007 Rusty Russell, IBM Corporation
+/*
+ * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation
+ * Copyright (C) 2009, 2010 Red Hat, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,142 +16,694 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/cdev.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
 #include <linux/err.h>
+#include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
 #include <linux/virtio.h>
 #include <linux/virtio_console.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
 #include "hvc_console.h"
 
-/*D:340 These represent our input and output console queues, and the virtio
- * operations for them. */
-static struct virtqueue *in_vq, *out_vq;
-static struct virtio_device *vdev;
-
-/* This is our input buffer, and how much data is left in it. */
-static unsigned int in_len;
-static char *in, *inbuf;
-
-/* The operations for our console. */
-static struct hv_ops virtio_cons;
-
-/* The hvc device */
-static struct hvc_struct *hvc;
-
-/*D:310 The put_chars() callback is pretty straightforward.
+/*
+ * This is a global struct for storing common data for all the devices
+ * this driver handles.
  *
- * We turn the characters into a scatter-gather list, add it to the output
- * queue and then kick the Host.  Then we sit here waiting for it to finish:
- * inefficient in theory, but in practice implementations will do it
- * immediately (lguest's Launcher does). */
-static int put_chars(u32 vtermno, const char *buf, int count)
+ * Mainly, it has a linked list for all the consoles in one place so
+ * that callbacks from hvc for get_chars(), put_chars() work properly
+ * across multiple devices and multiple ports per device.
+ */
+struct ports_driver_data {
+	/* Used for registering chardevs */
+	struct class *class;
+
+	/* Used for exporting per-port information to debugfs */
+	struct dentry *debugfs_dir;
+
+	/* Number of devices this driver is handling */
+	unsigned int index;
+
+	/*
+	 * This is used to keep track of the number of hvc consoles
+	 * spawned by this driver.  This number is given as the first
+	 * argument to hvc_alloc().  To correctly map an initial
+	 * console spawned via hvc_instantiate to the console being
+	 * hooked up via hvc_alloc, we need to pass the same vtermno.
+	 *
+	 * We also just assume the first console being initialised was
+	 * the first one that got used as the initial console.
+	 */
+	unsigned int next_vtermno;
+
+	/* All the console devices handled by this driver */
+	struct list_head consoles;
+};
+static struct ports_driver_data pdrvdata;
+
+DEFINE_SPINLOCK(pdrvdata_lock);
+
+/* This struct holds information that's relevant only for console ports */
+struct console {
+	/* We'll place all consoles in a list in the pdrvdata struct */
+	struct list_head list;
+
+	/* The hvc device associated with this console port */
+	struct hvc_struct *hvc;
+
+	/*
+	 * This number identifies the number that we used to register
+	 * with hvc in hvc_instantiate() and hvc_alloc(); this is the
+	 * number passed on by the hvc callbacks to us to
+	 * differentiate between the other console ports handled by
+	 * this driver
+	 */
+	u32 vtermno;
+};
+
+struct port_buffer {
+	char *buf;
+
+	/* size of the buffer in *buf above */
+	size_t size;
+
+	/* used length of the buffer */
+	size_t len;
+	/* offset in the buf from which to consume data */
+	size_t offset;
+};
+
+/*
+ * This is a per-device struct that stores data common to all the
+ * ports for that device (vdev->priv).
+ */
+struct ports_device {
+	/*
+	 * Workqueue handlers where we process deferred work after
+	 * notification
+	 */
+	struct work_struct control_work;
+	struct work_struct config_work;
+
+	struct list_head ports;
+
+	/* To protect the list of ports */
+	spinlock_t ports_lock;
+
+	/* To protect the vq operations for the control channel */
+	spinlock_t cvq_lock;
+
+	/* The current config space is stored here */
+	struct virtio_console_config config;
+
+	/* The virtio device we're associated with */
+	struct virtio_device *vdev;
+
+	/*
+	 * A couple of virtqueues for the control channel: one for
+	 * guest->host transfers, one for host->guest transfers
+	 */
+	struct virtqueue *c_ivq, *c_ovq;
+
+	/* Array of per-port IO virtqueues */
+	struct virtqueue **in_vqs, **out_vqs;
+
+	/* Used for numbering devices for sysfs and debugfs */
+	unsigned int drv_index;
+
+	/* Major number for this device.  Ports will be created as minors. */
+	int chr_major;
+};
+
+/* This struct holds the per-port data */
+struct port {
+	/* Next port in the list, head is in the ports_device */
+	struct list_head list;
+
+	/* Pointer to the parent virtio_console device */
+	struct ports_device *portdev;
+
+	/* The current buffer from which data has to be fed to readers */
+	struct port_buffer *inbuf;
+
+	/*
+	 * To protect the operations on the in_vq associated with this
+	 * port.  Has to be a spinlock because it can be called from
+	 * interrupt context (get_char()).
+	 */
+	spinlock_t inbuf_lock;
+
+	/* The IO vqs for this port */
+	struct virtqueue *in_vq, *out_vq;
+
+	/* File in the debugfs directory that exposes this port's information */
+	struct dentry *debugfs_file;
+
+	/*
+	 * The entries in this struct will be valid if this port is
+	 * hooked up to an hvc console
+	 */
+	struct console cons;
+
+	/* Each port associates with a separate char device */
+	struct cdev cdev;
+	struct device *dev;
+
+	/* A waitqueue for poll() or blocking read operations */
+	wait_queue_head_t waitqueue;
+
+	/* The 'name' of the port that we expose via sysfs properties */
+	char *name;
+
+	/* The 'id' to identify the port with the Host */
+	u32 id;
+
+	/* Is the host device open */
+	bool host_connected;
+
+	/* We should allow only one process to open a port */
+	bool guest_connected;
+};
+
+/* This is the very early arch-specified put chars function. */
+static int (*early_put_chars)(u32, const char *, int);
+
+static struct port *find_port_by_vtermno(u32 vtermno)
 {
-	struct scatterlist sg[1];
+	struct port *port;
+	struct console *cons;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdrvdata_lock, flags);
+	list_for_each_entry(cons, &pdrvdata.consoles, list) {
+		if (cons->vtermno == vtermno) {
+			port = container_of(cons, struct port, cons);
+			goto out;
+		}
+	}
+	port = NULL;
+out:
+	spin_unlock_irqrestore(&pdrvdata_lock, flags);
+	return port;
+}
+
+static struct port *find_port_by_id(struct ports_device *portdev, u32 id)
+{
+	struct port *port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&portdev->ports_lock, flags);
+	list_for_each_entry(port, &portdev->ports, list)
+		if (port->id == id)
+			goto out;
+	port = NULL;
+out:
+	spin_unlock_irqrestore(&portdev->ports_lock, flags);
+
+	return port;
+}
+
+static struct port *find_port_by_vq(struct ports_device *portdev,
+				    struct virtqueue *vq)
+{
+	struct port *port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&portdev->ports_lock, flags);
+	list_for_each_entry(port, &portdev->ports, list)
+		if (port->in_vq == vq || port->out_vq == vq)
+			goto out;
+	port = NULL;
+out:
+	spin_unlock_irqrestore(&portdev->ports_lock, flags);
+	return port;
+}
+
+static bool is_console_port(struct port *port)
+{
+	if (port->cons.hvc)
+		return true;
+	return false;
+}
+
+static inline bool use_multiport(struct ports_device *portdev)
+{
+	/*
+	 * This condition can be true when put_chars is called from
+	 * early_init
+	 */
+	if (!portdev->vdev)
+		return 0;
+	return portdev->vdev->features[0] & (1 << VIRTIO_CONSOLE_F_MULTIPORT);
+}
+
+static void free_buf(struct port_buffer *buf)
+{
+	kfree(buf->buf);
+	kfree(buf);
+}
+
+static struct port_buffer *alloc_buf(size_t buf_size)
+{
+	struct port_buffer *buf;
+
+	buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		goto fail;
+	buf->buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf->buf)
+		goto free_buf;
+	buf->len = 0;
+	buf->offset = 0;
+	buf->size = buf_size;
+	return buf;
+
+free_buf:
+	kfree(buf);
+fail:
+	return NULL;
+}
+
+/* Callers should take appropriate locks */
+static void *get_inbuf(struct port *port)
+{
+	struct port_buffer *buf;
+	struct virtqueue *vq;
 	unsigned int len;
 
-	/* This is a convenient routine to initialize a single-elem sg list */
-	sg_init_one(sg, buf, count);
-
-	/* add_buf wants a token to identify this buffer: we hand it any
-	 * non-NULL pointer, since there's only ever one buffer. */
-	if (out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, (void *)1) >= 0) {
-		/* Tell Host to go! */
-		out_vq->vq_ops->kick(out_vq);
-		/* Chill out until it's done with the buffer. */
-		while (!out_vq->vq_ops->get_buf(out_vq, &len))
-			cpu_relax();
+	vq = port->in_vq;
+	buf = vq->vq_ops->get_buf(vq, &len);
+	if (buf) {
+		buf->len = len;
+		buf->offset = 0;
 	}
-
-	/* We're expected to return the amount of data we wrote: all of it. */
-	return count;
+	return buf;
 }
 
-/* Create a scatter-gather list representing our input buffer and put it in the
- * queue. */
-static void add_inbuf(void)
+/*
+ * Create a scatter-gather list representing our input buffer and put
+ * it in the queue.
+ *
+ * Callers should take appropriate locks.
+ */
+static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf)
 {
 	struct scatterlist sg[1];
-	sg_init_one(sg, inbuf, PAGE_SIZE);
+	int ret;
 
-	/* We should always be able to add one buffer to an empty queue. */
-	if (in_vq->vq_ops->add_buf(in_vq, sg, 0, 1, inbuf) < 0)
-		BUG();
-	in_vq->vq_ops->kick(in_vq);
+	sg_init_one(sg, buf->buf, buf->size);
+
+	ret = vq->vq_ops->add_buf(vq, sg, 0, 1, buf);
+	vq->vq_ops->kick(vq);
+	return ret;
 }
 
-/*D:350 get_chars() is the callback from the hvc_console infrastructure when
- * an interrupt is received.
+/* Discard any unread data this port has. Callers lockers. */
+static void discard_port_data(struct port *port)
+{
+	struct port_buffer *buf;
+	struct virtqueue *vq;
+	unsigned int len;
+	int ret;
+
+	vq = port->in_vq;
+	if (port->inbuf)
+		buf = port->inbuf;
+	else
+		buf = vq->vq_ops->get_buf(vq, &len);
+
+	ret = 0;
+	while (buf) {
+		if (add_inbuf(vq, buf) < 0) {
+			ret++;
+			free_buf(buf);
+		}
+		buf = vq->vq_ops->get_buf(vq, &len);
+	}
+	port->inbuf = NULL;
+	if (ret)
+		dev_warn(port->dev, "Errors adding %d buffers back to vq\n",
+			 ret);
+}
+
+static bool port_has_data(struct port *port)
+{
+	unsigned long flags;
+	bool ret;
+
+	spin_lock_irqsave(&port->inbuf_lock, flags);
+	if (port->inbuf) {
+		ret = true;
+		goto out;
+	}
+	port->inbuf = get_inbuf(port);
+	if (port->inbuf) {
+		ret = true;
+		goto out;
+	}
+	ret = false;
+out:
+	spin_unlock_irqrestore(&port->inbuf_lock, flags);
+	return ret;
+}
+
+static ssize_t send_control_msg(struct port *port, unsigned int event,
+				unsigned int value)
+{
+	struct scatterlist sg[1];
+	struct virtio_console_control cpkt;
+	struct virtqueue *vq;
+	int len;
+
+	if (!use_multiport(port->portdev))
+		return 0;
+
+	cpkt.id = port->id;
+	cpkt.event = event;
+	cpkt.value = value;
+
+	vq = port->portdev->c_ovq;
+
+	sg_init_one(sg, &cpkt, sizeof(cpkt));
+	if (vq->vq_ops->add_buf(vq, sg, 1, 0, &cpkt) >= 0) {
+		vq->vq_ops->kick(vq);
+		while (!vq->vq_ops->get_buf(vq, &len))
+			cpu_relax();
+	}
+	return 0;
+}
+
+static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count)
+{
+	struct scatterlist sg[1];
+	struct virtqueue *out_vq;
+	ssize_t ret;
+	unsigned int len;
+
+	out_vq = port->out_vq;
+
+	sg_init_one(sg, in_buf, in_count);
+	ret = out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, in_buf);
+
+	/* Tell Host to go! */
+	out_vq->vq_ops->kick(out_vq);
+
+	if (ret < 0) {
+		len = 0;
+		goto fail;
+	}
+
+	/*
+	 * Wait till the host acknowledges it pushed out the data we
+	 * sent. Also ensure we return to userspace the number of
+	 * bytes that were successfully consumed by the host.
+	 */
+	while (!out_vq->vq_ops->get_buf(out_vq, &len))
+		cpu_relax();
+fail:
+	/* We're expected to return the amount of data we wrote */
+	return len;
+}
+
+/*
+ * Give out the data that's requested from the buffer that we have
+ * queued up.
+ */
+static ssize_t fill_readbuf(struct port *port, char *out_buf, size_t out_count,
+			    bool to_user)
+{
+	struct port_buffer *buf;
+	unsigned long flags;
+
+	if (!out_count || !port_has_data(port))
+		return 0;
+
+	buf = port->inbuf;
+	out_count = min(out_count, buf->len - buf->offset);
+
+	if (to_user) {
+		ssize_t ret;
+
+		ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count);
+		if (ret)
+			return -EFAULT;
+	} else {
+		memcpy(out_buf, buf->buf + buf->offset, out_count);
+	}
+
+	buf->offset += out_count;
+
+	if (buf->offset == buf->len) {
+		/*
+		 * We're done using all the data in this buffer.
+		 * Re-queue so that the Host can send us more data.
+		 */
+		spin_lock_irqsave(&port->inbuf_lock, flags);
+		port->inbuf = NULL;
+
+		if (add_inbuf(port->in_vq, buf) < 0)
+			dev_warn(port->dev, "failed add_buf\n");
+
+		spin_unlock_irqrestore(&port->inbuf_lock, flags);
+	}
+	/* Return the number of bytes actually copied */
+	return out_count;
+}
+
+/* The condition that must be true for polling to end */
+static bool wait_is_over(struct port *port)
+{
+	return port_has_data(port) || !port->host_connected;
+}
+
+static ssize_t port_fops_read(struct file *filp, char __user *ubuf,
+			      size_t count, loff_t *offp)
+{
+	struct port *port;
+	ssize_t ret;
+
+	port = filp->private_data;
+
+	if (!port_has_data(port)) {
+		/*
+		 * If nothing's connected on the host just return 0 in
+		 * case of list_empty; this tells the userspace app
+		 * that there's no connection
+		 */
+		if (!port->host_connected)
+			return 0;
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		ret = wait_event_interruptible(port->waitqueue,
+					       wait_is_over(port));
+		if (ret < 0)
+			return ret;
+	}
+	/*
+	 * We could've received a disconnection message while we were
+	 * waiting for more data.
+	 *
+	 * This check is not clubbed in the if() statement above as we
+	 * might receive some data as well as the host could get
+	 * disconnected after we got woken up from our wait.  So we
+	 * really want to give off whatever data we have and only then
+	 * check for host_connected.
+	 */
+	if (!port_has_data(port) && !port->host_connected)
+		return 0;
+
+	return fill_readbuf(port, ubuf, count, true);
+}
+
+static ssize_t port_fops_write(struct file *filp, const char __user *ubuf,
+			       size_t count, loff_t *offp)
+{
+	struct port *port;
+	char *buf;
+	ssize_t ret;
+
+	port = filp->private_data;
+
+	count = min((size_t)(32 * 1024), count);
+
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = copy_from_user(buf, ubuf, count);
+	if (ret) {
+		ret = -EFAULT;
+		goto free_buf;
+	}
+
+	ret = send_buf(port, buf, count);
+free_buf:
+	kfree(buf);
+	return ret;
+}
+
+static unsigned int port_fops_poll(struct file *filp, poll_table *wait)
+{
+	struct port *port;
+	unsigned int ret;
+
+	port = filp->private_data;
+	poll_wait(filp, &port->waitqueue, wait);
+
+	ret = 0;
+	if (port->inbuf)
+		ret |= POLLIN | POLLRDNORM;
+	if (port->host_connected)
+		ret |= POLLOUT;
+	if (!port->host_connected)
+		ret |= POLLHUP;
+
+	return ret;
+}
+
+static int port_fops_release(struct inode *inode, struct file *filp)
+{
+	struct port *port;
+
+	port = filp->private_data;
+
+	/* Notify host of port being closed */
+	send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+
+	spin_lock_irq(&port->inbuf_lock);
+	port->guest_connected = false;
+
+	discard_port_data(port);
+
+	spin_unlock_irq(&port->inbuf_lock);
+
+	return 0;
+}
+
+static int port_fops_open(struct inode *inode, struct file *filp)
+{
+	struct cdev *cdev = inode->i_cdev;
+	struct port *port;
+
+	port = container_of(cdev, struct port, cdev);
+	filp->private_data = port;
+
+	/*
+	 * Don't allow opening of console port devices -- that's done
+	 * via /dev/hvc
+	 */
+	if (is_console_port(port))
+		return -ENXIO;
+
+	/* Allow only one process to open a particular port at a time */
+	spin_lock_irq(&port->inbuf_lock);
+	if (port->guest_connected) {
+		spin_unlock_irq(&port->inbuf_lock);
+		return -EMFILE;
+	}
+
+	port->guest_connected = true;
+	spin_unlock_irq(&port->inbuf_lock);
+
+	/* Notify host of port being opened */
+	send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1);
+
+	return 0;
+}
+
+/*
+ * The file operations that we support: programs in the guest can open
+ * a console device, read from it, write to it, poll for data and
+ * close it.  The devices are at
+ *   /dev/vport<device number>p<port number>
+ */
+static const struct file_operations port_fops = {
+	.owner = THIS_MODULE,
+	.open  = port_fops_open,
+	.read  = port_fops_read,
+	.write = port_fops_write,
+	.poll  = port_fops_poll,
+	.release = port_fops_release,
+};
+
+/*
+ * The put_chars() callback is pretty straightforward.
  *
- * Most of the code deals with the fact that the hvc_console() infrastructure
- * only asks us for 16 bytes at a time.  We keep in_offset and in_used fields
- * for partially-filled buffers. */
+ * We turn the characters into a scatter-gather list, add it to the
+ * output queue and then kick the Host.  Then we sit here waiting for
+ * it to finish: inefficient in theory, but in practice
+ * implementations will do it immediately (lguest's Launcher does).
+ */
+static int put_chars(u32 vtermno, const char *buf, int count)
+{
+	struct port *port;
+
+	port = find_port_by_vtermno(vtermno);
+	if (!port)
+		return 0;
+
+	if (unlikely(early_put_chars))
+		return early_put_chars(vtermno, buf, count);
+
+	return send_buf(port, (void *)buf, count);
+}
+
+/*
+ * get_chars() is the callback from the hvc_console infrastructure
+ * when an interrupt is received.
+ *
+ * We call out to fill_readbuf that gets us the required data from the
+ * buffers that are queued up.
+ */
 static int get_chars(u32 vtermno, char *buf, int count)
 {
+	struct port *port;
+
+	port = find_port_by_vtermno(vtermno);
+	if (!port)
+		return 0;
+
 	/* If we don't have an input queue yet, we can't get input. */
-	BUG_ON(!in_vq);
+	BUG_ON(!port->in_vq);
 
-	/* No buffer?  Try to get one. */
-	if (!in_len) {
-		in = in_vq->vq_ops->get_buf(in_vq, &in_len);
-		if (!in)
-			return 0;
-	}
-
-	/* You want more than we have to give?  Well, try wanting less! */
-	if (in_len < count)
-		count = in_len;
-
-	/* Copy across to their buffer and increment offset. */
-	memcpy(buf, in, count);
-	in += count;
-	in_len -= count;
-
-	/* Finished?  Re-register buffer so Host will use it again. */
-	if (in_len == 0)
-		add_inbuf();
-
-	return count;
-}
-/*:*/
-
-/*D:320 Console drivers are initialized very early so boot messages can go out,
- * so we do things slightly differently from the generic virtio initialization
- * of the net and block drivers.
- *
- * At this stage, the console is output-only.  It's too early to set up a
- * virtqueue, so we let the drivers do some boutique early-output thing. */
-int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
-{
-	virtio_cons.put_chars = put_chars;
-	return hvc_instantiate(0, 0, &virtio_cons);
+	return fill_readbuf(port, buf, count, false);
 }
 
-/*
- * virtio console configuration. This supports:
- * - console resize
- */
-static void virtcons_apply_config(struct virtio_device *dev)
+static void resize_console(struct port *port)
 {
+	struct virtio_device *vdev;
 	struct winsize ws;
 
-	if (virtio_has_feature(dev, VIRTIO_CONSOLE_F_SIZE)) {
-		dev->config->get(dev,
-				 offsetof(struct virtio_console_config, cols),
-				 &ws.ws_col, sizeof(u16));
-		dev->config->get(dev,
-				 offsetof(struct virtio_console_config, rows),
-				 &ws.ws_row, sizeof(u16));
-		hvc_resize(hvc, ws);
+	vdev = port->portdev->vdev;
+	if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)) {
+		vdev->config->get(vdev,
+				  offsetof(struct virtio_console_config, cols),
+				  &ws.ws_col, sizeof(u16));
+		vdev->config->get(vdev,
+				  offsetof(struct virtio_console_config, rows),
+				  &ws.ws_row, sizeof(u16));
+		hvc_resize(port->cons.hvc, ws);
 	}
 }
 
-/*
- * we support only one console, the hvc struct is a global var
- * We set the configuration at this point, since we now have a tty
- */
+/* We set the configuration at this point, since we now have a tty */
 static int notifier_add_vio(struct hvc_struct *hp, int data)
 {
+	struct port *port;
+
+	port = find_port_by_vtermno(hp->vtermno);
+	if (!port)
+		return -EINVAL;
+
 	hp->irq_requested = 1;
-	virtcons_apply_config(vdev);
+	resize_console(port);
 
 	return 0;
 }
@@ -173,79 +713,797 @@
 	hp->irq_requested = 0;
 }
 
-static void hvc_handle_input(struct virtqueue *vq)
+/* The operations for console ports. */
+static const struct hv_ops hv_ops = {
+	.get_chars = get_chars,
+	.put_chars = put_chars,
+	.notifier_add = notifier_add_vio,
+	.notifier_del = notifier_del_vio,
+	.notifier_hangup = notifier_del_vio,
+};
+
+/*
+ * Console drivers are initialized very early so boot messages can go
+ * out, so we do things slightly differently from the generic virtio
+ * initialization of the net and block drivers.
+ *
+ * At this stage, the console is output-only.  It's too early to set
+ * up a virtqueue, so we let the drivers do some boutique early-output
+ * thing.
+ */
+int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int))
 {
-	if (hvc_poll(hvc))
+	early_put_chars = put_chars;
+	return hvc_instantiate(0, 0, &hv_ops);
+}
+
+int init_port_console(struct port *port)
+{
+	int ret;
+
+	/*
+	 * The Host's telling us this port is a console port.  Hook it
+	 * up with an hvc console.
+	 *
+	 * To set up and manage our virtual console, we call
+	 * hvc_alloc().
+	 *
+	 * The first argument of hvc_alloc() is the virtual console
+	 * number.  The second argument is the parameter for the
+	 * notification mechanism (like irq number).  We currently
+	 * leave this as zero, virtqueues have implicit notifications.
+	 *
+	 * The third argument is a "struct hv_ops" containing the
+	 * put_chars() get_chars(), notifier_add() and notifier_del()
+	 * pointers.  The final argument is the output buffer size: we
+	 * can do any size, so we put PAGE_SIZE here.
+	 */
+	port->cons.vtermno = pdrvdata.next_vtermno;
+
+	port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE);
+	if (IS_ERR(port->cons.hvc)) {
+		ret = PTR_ERR(port->cons.hvc);
+		dev_err(port->dev,
+			"error %d allocating hvc for port\n", ret);
+		port->cons.hvc = NULL;
+		return ret;
+	}
+	spin_lock_irq(&pdrvdata_lock);
+	pdrvdata.next_vtermno++;
+	list_add_tail(&port->cons.list, &pdrvdata.consoles);
+	spin_unlock_irq(&pdrvdata_lock);
+	port->guest_connected = true;
+
+	/* Notify host of port being opened */
+	send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1);
+
+	return 0;
+}
+
+static ssize_t show_port_name(struct device *dev,
+			      struct device_attribute *attr, char *buffer)
+{
+	struct port *port;
+
+	port = dev_get_drvdata(dev);
+
+	return sprintf(buffer, "%s\n", port->name);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL);
+
+static struct attribute *port_sysfs_entries[] = {
+	&dev_attr_name.attr,
+	NULL
+};
+
+static struct attribute_group port_attribute_group = {
+	.name = NULL,		/* put in device directory */
+	.attrs = port_sysfs_entries,
+};
+
+static int debugfs_open(struct inode *inode, struct file *filp)
+{
+	filp->private_data = inode->i_private;
+	return 0;
+}
+
+static ssize_t debugfs_read(struct file *filp, char __user *ubuf,
+			    size_t count, loff_t *offp)
+{
+	struct port *port;
+	char *buf;
+	ssize_t ret, out_offset, out_count;
+
+	out_count = 1024;
+	buf = kmalloc(out_count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	port = filp->private_data;
+	out_offset = 0;
+	out_offset += snprintf(buf + out_offset, out_count,
+			       "name: %s\n", port->name ? port->name : "");
+	out_offset += snprintf(buf + out_offset, out_count - out_offset,
+			       "guest_connected: %d\n", port->guest_connected);
+	out_offset += snprintf(buf + out_offset, out_count - out_offset,
+			       "host_connected: %d\n", port->host_connected);
+	out_offset += snprintf(buf + out_offset, out_count - out_offset,
+			       "is_console: %s\n",
+			       is_console_port(port) ? "yes" : "no");
+	out_offset += snprintf(buf + out_offset, out_count - out_offset,
+			       "console_vtermno: %u\n", port->cons.vtermno);
+
+	ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset);
+	kfree(buf);
+	return ret;
+}
+
+static const struct file_operations port_debugfs_ops = {
+	.owner = THIS_MODULE,
+	.open  = debugfs_open,
+	.read  = debugfs_read,
+};
+
+/* Remove all port-specific data. */
+static int remove_port(struct port *port)
+{
+	struct port_buffer *buf;
+
+	spin_lock_irq(&port->portdev->ports_lock);
+	list_del(&port->list);
+	spin_unlock_irq(&port->portdev->ports_lock);
+
+	if (is_console_port(port)) {
+		spin_lock_irq(&pdrvdata_lock);
+		list_del(&port->cons.list);
+		spin_unlock_irq(&pdrvdata_lock);
+		hvc_remove(port->cons.hvc);
+	}
+	if (port->guest_connected)
+		send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0);
+
+	sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
+	device_destroy(pdrvdata.class, port->dev->devt);
+	cdev_del(&port->cdev);
+
+	/* Remove unused data this port might have received. */
+	discard_port_data(port);
+
+	/* Remove buffers we queued up for the Host to send us data in. */
+	while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq)))
+		free_buf(buf);
+
+	kfree(port->name);
+
+	debugfs_remove(port->debugfs_file);
+
+	kfree(port);
+	return 0;
+}
+
+/* Any private messages that the Host and Guest want to share */
+static void handle_control_message(struct ports_device *portdev,
+				   struct port_buffer *buf)
+{
+	struct virtio_console_control *cpkt;
+	struct port *port;
+	size_t name_size;
+	int err;
+
+	cpkt = (struct virtio_console_control *)(buf->buf + buf->offset);
+
+	port = find_port_by_id(portdev, cpkt->id);
+	if (!port) {
+		/* No valid header at start of buffer.  Drop it. */
+		dev_dbg(&portdev->vdev->dev,
+			"Invalid index %u in control packet\n", cpkt->id);
+		return;
+	}
+
+	switch (cpkt->event) {
+	case VIRTIO_CONSOLE_CONSOLE_PORT:
+		if (!cpkt->value)
+			break;
+		if (is_console_port(port))
+			break;
+
+		init_port_console(port);
+		/*
+		 * Could remove the port here in case init fails - but
+		 * have to notify the host first.
+		 */
+		break;
+	case VIRTIO_CONSOLE_RESIZE:
+		if (!is_console_port(port))
+			break;
+		port->cons.hvc->irq_requested = 1;
+		resize_console(port);
+		break;
+	case VIRTIO_CONSOLE_PORT_OPEN:
+		port->host_connected = cpkt->value;
+		wake_up_interruptible(&port->waitqueue);
+		break;
+	case VIRTIO_CONSOLE_PORT_NAME:
+		/*
+		 * Skip the size of the header and the cpkt to get the size
+		 * of the name that was sent
+		 */
+		name_size = buf->len - buf->offset - sizeof(*cpkt) + 1;
+
+		port->name = kmalloc(name_size, GFP_KERNEL);
+		if (!port->name) {
+			dev_err(port->dev,
+				"Not enough space to store port name\n");
+			break;
+		}
+		strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt),
+			name_size - 1);
+		port->name[name_size - 1] = 0;
+
+		/*
+		 * Since we only have one sysfs attribute, 'name',
+		 * create it only if we have a name for the port.
+		 */
+		err = sysfs_create_group(&port->dev->kobj,
+					 &port_attribute_group);
+		if (err)
+			dev_err(port->dev,
+				"Error %d creating sysfs device attributes\n",
+				err);
+
+		break;
+	case VIRTIO_CONSOLE_PORT_REMOVE:
+		/*
+		 * Hot unplug the port.  We don't decrement nr_ports
+		 * since we don't want to deal with extra complexities
+		 * of using the lowest-available port id: We can just
+		 * pick up the nr_ports number as the id and not have
+		 * userspace send it to us.  This helps us in two
+		 * ways:
+		 *
+		 * - We don't need to have a 'port_id' field in the
+		 *   config space when a port is hot-added.  This is a
+		 *   good thing as we might queue up multiple hotplug
+		 *   requests issued in our workqueue.
+		 *
+		 * - Another way to deal with this would have been to
+		 *   use a bitmap of the active ports and select the
+		 *   lowest non-active port from that map.  That
+		 *   bloats the already tight config space and we
+		 *   would end up artificially limiting the
+		 *   max. number of ports to sizeof(bitmap).  Right
+		 *   now we can support 2^32 ports (as the port id is
+		 *   stored in a u32 type).
+		 *
+		 */
+		remove_port(port);
+		break;
+	}
+}
+
+static void control_work_handler(struct work_struct *work)
+{
+	struct ports_device *portdev;
+	struct virtqueue *vq;
+	struct port_buffer *buf;
+	unsigned int len;
+
+	portdev = container_of(work, struct ports_device, control_work);
+	vq = portdev->c_ivq;
+
+	spin_lock(&portdev->cvq_lock);
+	while ((buf = vq->vq_ops->get_buf(vq, &len))) {
+		spin_unlock(&portdev->cvq_lock);
+
+		buf->len = len;
+		buf->offset = 0;
+
+		handle_control_message(portdev, buf);
+
+		spin_lock(&portdev->cvq_lock);
+		if (add_inbuf(portdev->c_ivq, buf) < 0) {
+			dev_warn(&portdev->vdev->dev,
+				 "Error adding buffer to queue\n");
+			free_buf(buf);
+		}
+	}
+	spin_unlock(&portdev->cvq_lock);
+}
+
+static void in_intr(struct virtqueue *vq)
+{
+	struct port *port;
+	unsigned long flags;
+
+	port = find_port_by_vq(vq->vdev->priv, vq);
+	if (!port)
+		return;
+
+	spin_lock_irqsave(&port->inbuf_lock, flags);
+	if (!port->inbuf)
+		port->inbuf = get_inbuf(port);
+
+	/*
+	 * Don't queue up data when port is closed.  This condition
+	 * can be reached when a console port is not yet connected (no
+	 * tty is spawned) and the host sends out data to console
+	 * ports.  For generic serial ports, the host won't
+	 * (shouldn't) send data till the guest is connected.
+	 */
+	if (!port->guest_connected)
+		discard_port_data(port);
+
+	spin_unlock_irqrestore(&port->inbuf_lock, flags);
+
+	wake_up_interruptible(&port->waitqueue);
+
+	if (is_console_port(port) && hvc_poll(port->cons.hvc))
 		hvc_kick();
 }
 
-/*D:370 Once we're further in boot, we get probed like any other virtio device.
- * At this stage we set up the output virtqueue.
- *
- * To set up and manage our virtual console, we call hvc_alloc().  Since we
- * never remove the console device we never need this pointer again.
- *
- * Finally we put our input buffer in the input queue, ready to receive. */
-static int __devinit virtcons_probe(struct virtio_device *dev)
+static void control_intr(struct virtqueue *vq)
 {
-	vq_callback_t *callbacks[] = { hvc_handle_input, NULL};
-	const char *names[] = { "input", "output" };
-	struct virtqueue *vqs[2];
+	struct ports_device *portdev;
+
+	portdev = vq->vdev->priv;
+	schedule_work(&portdev->control_work);
+}
+
+static void config_intr(struct virtio_device *vdev)
+{
+	struct ports_device *portdev;
+
+	portdev = vdev->priv;
+	if (use_multiport(portdev)) {
+		/* Handle port hot-add */
+		schedule_work(&portdev->config_work);
+	}
+	/*
+	 * We'll use this way of resizing only for legacy support.
+	 * For newer userspace (VIRTIO_CONSOLE_F_MULTPORT+), use
+	 * control messages to indicate console size changes so that
+	 * it can be done per-port
+	 */
+	resize_console(find_port_by_id(portdev, 0));
+}
+
+static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock)
+{
+	struct port_buffer *buf;
+	unsigned int ret;
 	int err;
 
-	vdev = dev;
+	ret = 0;
+	do {
+		buf = alloc_buf(PAGE_SIZE);
+		if (!buf)
+			break;
 
-	/* This is the scratch page we use to receive console input */
-	inbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!inbuf) {
+		spin_lock_irq(lock);
+		err = add_inbuf(vq, buf);
+		if (err < 0) {
+			spin_unlock_irq(lock);
+			free_buf(buf);
+			break;
+		}
+		ret++;
+		spin_unlock_irq(lock);
+	} while (err > 0);
+
+	return ret;
+}
+
+static int add_port(struct ports_device *portdev, u32 id)
+{
+	char debugfs_name[16];
+	struct port *port;
+	struct port_buffer *buf;
+	dev_t devt;
+	int err;
+
+	port = kmalloc(sizeof(*port), GFP_KERNEL);
+	if (!port) {
 		err = -ENOMEM;
 		goto fail;
 	}
 
-	/* Find the queues. */
-	/* FIXME: This is why we want to wean off hvc: we do nothing
-	 * when input comes in. */
-	err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
-	if (err)
-		goto free;
+	port->portdev = portdev;
+	port->id = id;
 
-	in_vq = vqs[0];
-	out_vq = vqs[1];
+	port->name = NULL;
+	port->inbuf = NULL;
+	port->cons.hvc = NULL;
 
-	/* Start using the new console output. */
-	virtio_cons.get_chars = get_chars;
-	virtio_cons.put_chars = put_chars;
-	virtio_cons.notifier_add = notifier_add_vio;
-	virtio_cons.notifier_del = notifier_del_vio;
-	virtio_cons.notifier_hangup = notifier_del_vio;
+	port->host_connected = port->guest_connected = false;
 
-	/* The first argument of hvc_alloc() is the virtual console number, so
-	 * we use zero.  The second argument is the parameter for the
-	 * notification mechanism (like irq number). We currently leave this
-	 * as zero, virtqueues have implicit notifications.
-	 *
-	 * The third argument is a "struct hv_ops" containing the put_chars()
-	 * get_chars(), notifier_add() and notifier_del() pointers.
-	 * The final argument is the output buffer size: we can do any size,
-	 * so we put PAGE_SIZE here. */
-	hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE);
-	if (IS_ERR(hvc)) {
-		err = PTR_ERR(hvc);
-		goto free_vqs;
+	port->in_vq = portdev->in_vqs[port->id];
+	port->out_vq = portdev->out_vqs[port->id];
+
+	cdev_init(&port->cdev, &port_fops);
+
+	devt = MKDEV(portdev->chr_major, id);
+	err = cdev_add(&port->cdev, devt, 1);
+	if (err < 0) {
+		dev_err(&port->portdev->vdev->dev,
+			"Error %d adding cdev for port %u\n", err, id);
+		goto free_port;
+	}
+	port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev,
+				  devt, port, "vport%up%u",
+				  port->portdev->drv_index, id);
+	if (IS_ERR(port->dev)) {
+		err = PTR_ERR(port->dev);
+		dev_err(&port->portdev->vdev->dev,
+			"Error %d creating device for port %u\n",
+			err, id);
+		goto free_cdev;
 	}
 
-	/* Register the input buffer the first time. */
-	add_inbuf();
+	spin_lock_init(&port->inbuf_lock);
+	init_waitqueue_head(&port->waitqueue);
+
+	/* Fill the in_vq with buffers so the host can send us data. */
+	err = fill_queue(port->in_vq, &port->inbuf_lock);
+	if (!err) {
+		dev_err(port->dev, "Error allocating inbufs\n");
+		err = -ENOMEM;
+		goto free_device;
+	}
+
+	/*
+	 * If we're not using multiport support, this has to be a console port
+	 */
+	if (!use_multiport(port->portdev)) {
+		err = init_port_console(port);
+		if (err)
+			goto free_inbufs;
+	}
+
+	spin_lock_irq(&portdev->ports_lock);
+	list_add_tail(&port->list, &port->portdev->ports);
+	spin_unlock_irq(&portdev->ports_lock);
+
+	/*
+	 * Tell the Host we're set so that it can send us various
+	 * configuration parameters for this port (eg, port name,
+	 * caching, whether this is a console port, etc.)
+	 */
+	send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+
+	if (pdrvdata.debugfs_dir) {
+		/*
+		 * Finally, create the debugfs file that we can use to
+		 * inspect a port's state at any time
+		 */
+		sprintf(debugfs_name, "vport%up%u",
+			port->portdev->drv_index, id);
+		port->debugfs_file = debugfs_create_file(debugfs_name, 0444,
+							 pdrvdata.debugfs_dir,
+							 port,
+							 &port_debugfs_ops);
+	}
+	return 0;
+
+free_inbufs:
+	while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq)))
+		free_buf(buf);
+free_device:
+	device_destroy(pdrvdata.class, port->dev->devt);
+free_cdev:
+	cdev_del(&port->cdev);
+free_port:
+	kfree(port);
+fail:
+	return err;
+}
+
+/*
+ * The workhandler for config-space updates.
+ *
+ * This is called when ports are hot-added.
+ */
+static void config_work_handler(struct work_struct *work)
+{
+	struct virtio_console_config virtconconf;
+	struct ports_device *portdev;
+	struct virtio_device *vdev;
+	int err;
+
+	portdev = container_of(work, struct ports_device, config_work);
+
+	vdev = portdev->vdev;
+	vdev->config->get(vdev,
+			  offsetof(struct virtio_console_config, nr_ports),
+			  &virtconconf.nr_ports,
+			  sizeof(virtconconf.nr_ports));
+
+	if (portdev->config.nr_ports == virtconconf.nr_ports) {
+		/*
+		 * Port 0 got hot-added.  Since we already did all the
+		 * other initialisation for it, just tell the Host
+		 * that the port is ready if we find the port.  In
+		 * case the port was hot-removed earlier, we call
+		 * add_port to add the port.
+		 */
+		struct port *port;
+
+		port = find_port_by_id(portdev, 0);
+		if (!port)
+			add_port(portdev, 0);
+		else
+			send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+		return;
+	}
+	if (virtconconf.nr_ports > portdev->config.max_nr_ports) {
+		dev_warn(&vdev->dev,
+			 "More ports specified (%u) than allowed (%u)",
+			 portdev->config.nr_ports + 1,
+			 portdev->config.max_nr_ports);
+		return;
+	}
+	if (virtconconf.nr_ports < portdev->config.nr_ports)
+		return;
+
+	/* Hot-add ports */
+	while (virtconconf.nr_ports - portdev->config.nr_ports) {
+		err = add_port(portdev, portdev->config.nr_ports);
+		if (err)
+			break;
+		portdev->config.nr_ports++;
+	}
+}
+
+static int init_vqs(struct ports_device *portdev)
+{
+	vq_callback_t **io_callbacks;
+	char **io_names;
+	struct virtqueue **vqs;
+	u32 i, j, nr_ports, nr_queues;
+	int err;
+
+	nr_ports = portdev->config.max_nr_ports;
+	nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
+
+	vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL);
+	if (!vqs) {
+		err = -ENOMEM;
+		goto fail;
+	}
+	io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL);
+	if (!io_callbacks) {
+		err = -ENOMEM;
+		goto free_vqs;
+	}
+	io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL);
+	if (!io_names) {
+		err = -ENOMEM;
+		goto free_callbacks;
+	}
+	portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
+				  GFP_KERNEL);
+	if (!portdev->in_vqs) {
+		err = -ENOMEM;
+		goto free_names;
+	}
+	portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
+				   GFP_KERNEL);
+	if (!portdev->out_vqs) {
+		err = -ENOMEM;
+		goto free_invqs;
+	}
+
+	/*
+	 * For backward compat (newer host but older guest), the host
+	 * spawns a console port first and also inits the vqs for port
+	 * 0 before others.
+	 */
+	j = 0;
+	io_callbacks[j] = in_intr;
+	io_callbacks[j + 1] = NULL;
+	io_names[j] = "input";
+	io_names[j + 1] = "output";
+	j += 2;
+
+	if (use_multiport(portdev)) {
+		io_callbacks[j] = control_intr;
+		io_callbacks[j + 1] = NULL;
+		io_names[j] = "control-i";
+		io_names[j + 1] = "control-o";
+
+		for (i = 1; i < nr_ports; i++) {
+			j += 2;
+			io_callbacks[j] = in_intr;
+			io_callbacks[j + 1] = NULL;
+			io_names[j] = "input";
+			io_names[j + 1] = "output";
+		}
+	}
+	/* Find the queues. */
+	err = portdev->vdev->config->find_vqs(portdev->vdev, nr_queues, vqs,
+					      io_callbacks,
+					      (const char **)io_names);
+	if (err)
+		goto free_outvqs;
+
+	j = 0;
+	portdev->in_vqs[0] = vqs[0];
+	portdev->out_vqs[0] = vqs[1];
+	j += 2;
+	if (use_multiport(portdev)) {
+		portdev->c_ivq = vqs[j];
+		portdev->c_ovq = vqs[j + 1];
+
+		for (i = 1; i < nr_ports; i++) {
+			j += 2;
+			portdev->in_vqs[i] = vqs[j];
+			portdev->out_vqs[i] = vqs[j + 1];
+		}
+	}
+	kfree(io_callbacks);
+	kfree(io_names);
+	kfree(vqs);
+
+	return 0;
+
+free_names:
+	kfree(io_names);
+free_callbacks:
+	kfree(io_callbacks);
+free_outvqs:
+	kfree(portdev->out_vqs);
+free_invqs:
+	kfree(portdev->in_vqs);
+free_vqs:
+	kfree(vqs);
+fail:
+	return err;
+}
+
+static const struct file_operations portdev_fops = {
+	.owner = THIS_MODULE,
+};
+
+/*
+ * Once we're further in boot, we get probed like any other virtio
+ * device.
+ *
+ * If the host also supports multiple console ports, we check the
+ * config space to see how many ports the host has spawned.  We
+ * initialize each port found.
+ */
+static int __devinit virtcons_probe(struct virtio_device *vdev)
+{
+	struct ports_device *portdev;
+	u32 i;
+	int err;
+	bool multiport;
+
+	portdev = kmalloc(sizeof(*portdev), GFP_KERNEL);
+	if (!portdev) {
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	/* Attach this portdev to this virtio_device, and vice-versa. */
+	portdev->vdev = vdev;
+	vdev->priv = portdev;
+
+	spin_lock_irq(&pdrvdata_lock);
+	portdev->drv_index = pdrvdata.index++;
+	spin_unlock_irq(&pdrvdata_lock);
+
+	portdev->chr_major = register_chrdev(0, "virtio-portsdev",
+					     &portdev_fops);
+	if (portdev->chr_major < 0) {
+		dev_err(&vdev->dev,
+			"Error %d registering chrdev for device %u\n",
+			portdev->chr_major, portdev->drv_index);
+		err = portdev->chr_major;
+		goto free;
+	}
+
+	multiport = false;
+	portdev->config.nr_ports = 1;
+	portdev->config.max_nr_ports = 1;
+	if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) {
+		multiport = true;
+		vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT;
+
+		vdev->config->get(vdev, offsetof(struct virtio_console_config,
+						 nr_ports),
+				  &portdev->config.nr_ports,
+				  sizeof(portdev->config.nr_ports));
+		vdev->config->get(vdev, offsetof(struct virtio_console_config,
+						 max_nr_ports),
+				  &portdev->config.max_nr_ports,
+				  sizeof(portdev->config.max_nr_ports));
+		if (portdev->config.nr_ports > portdev->config.max_nr_ports) {
+			dev_warn(&vdev->dev,
+				 "More ports (%u) specified than allowed (%u). Will init %u ports.",
+				 portdev->config.nr_ports,
+				 portdev->config.max_nr_ports,
+				 portdev->config.max_nr_ports);
+
+			portdev->config.nr_ports = portdev->config.max_nr_ports;
+		}
+	}
+
+	/* Let the Host know we support multiple ports.*/
+	vdev->config->finalize_features(vdev);
+
+	err = init_vqs(portdev);
+	if (err < 0) {
+		dev_err(&vdev->dev, "Error %d initializing vqs\n", err);
+		goto free_chrdev;
+	}
+
+	spin_lock_init(&portdev->ports_lock);
+	INIT_LIST_HEAD(&portdev->ports);
+
+	if (multiport) {
+		spin_lock_init(&portdev->cvq_lock);
+		INIT_WORK(&portdev->control_work, &control_work_handler);
+		INIT_WORK(&portdev->config_work, &config_work_handler);
+
+		err = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+		if (!err) {
+			dev_err(&vdev->dev,
+				"Error allocating buffers for control queue\n");
+			err = -ENOMEM;
+			goto free_vqs;
+		}
+	}
+
+	for (i = 0; i < portdev->config.nr_ports; i++)
+		add_port(portdev, i);
+
+	/* Start using the new console output. */
+	early_put_chars = NULL;
 	return 0;
 
 free_vqs:
 	vdev->config->del_vqs(vdev);
+	kfree(portdev->in_vqs);
+	kfree(portdev->out_vqs);
+free_chrdev:
+	unregister_chrdev(portdev->chr_major, "virtio-portsdev");
 free:
-	kfree(inbuf);
+	kfree(portdev);
 fail:
 	return err;
 }
 
+static void virtcons_remove(struct virtio_device *vdev)
+{
+	struct ports_device *portdev;
+	struct port *port, *port2;
+	struct port_buffer *buf;
+	unsigned int len;
+
+	portdev = vdev->priv;
+
+	cancel_work_sync(&portdev->control_work);
+	cancel_work_sync(&portdev->config_work);
+
+	list_for_each_entry_safe(port, port2, &portdev->ports, list)
+		remove_port(port);
+
+	unregister_chrdev(portdev->chr_major, "virtio-portsdev");
+
+	while ((buf = portdev->c_ivq->vq_ops->get_buf(portdev->c_ivq, &len)))
+		free_buf(buf);
+
+	while ((buf = portdev->c_ivq->vq_ops->detach_unused_buf(portdev->c_ivq)))
+		free_buf(buf);
+
+	vdev->config->del_vqs(vdev);
+	kfree(portdev->in_vqs);
+	kfree(portdev->out_vqs);
+
+	kfree(portdev);
+}
+
 static struct virtio_device_id id_table[] = {
 	{ VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID },
 	{ 0 },
@@ -253,6 +1511,7 @@
 
 static unsigned int features[] = {
 	VIRTIO_CONSOLE_F_SIZE,
+	VIRTIO_CONSOLE_F_MULTIPORT,
 };
 
 static struct virtio_driver virtio_console = {
@@ -262,14 +1521,41 @@
 	.driver.owner =	THIS_MODULE,
 	.id_table =	id_table,
 	.probe =	virtcons_probe,
-	.config_changed = virtcons_apply_config,
+	.remove =	virtcons_remove,
+	.config_changed = config_intr,
 };
 
 static int __init init(void)
 {
+	int err;
+
+	pdrvdata.class = class_create(THIS_MODULE, "virtio-ports");
+	if (IS_ERR(pdrvdata.class)) {
+		err = PTR_ERR(pdrvdata.class);
+		pr_err("Error %d creating virtio-ports class\n", err);
+		return err;
+	}
+
+	pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL);
+	if (!pdrvdata.debugfs_dir) {
+		pr_warning("Error %ld creating debugfs dir for virtio-ports\n",
+			   PTR_ERR(pdrvdata.debugfs_dir));
+	}
+	INIT_LIST_HEAD(&pdrvdata.consoles);
+
 	return register_virtio_driver(&virtio_console);
 }
+
+static void __exit fini(void)
+{
+	unregister_virtio_driver(&virtio_console);
+
+	class_destroy(pdrvdata.class);
+	if (pdrvdata.debugfs_dir)
+		debugfs_remove_recursive(pdrvdata.debugfs_dir);
+}
 module_init(init);
+module_exit(fini);
 
 MODULE_DEVICE_TABLE(virtio, id_table);
 MODULE_DESCRIPTION("Virtio console driver");
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index 27d20fa..b314a99 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -21,7 +21,7 @@
 
 #define DRV_NAME "cs5535-clockevt"
 
-static int timer_irq = CONFIG_CS5535_MFGPT_DEFAULT_IRQ;
+static int timer_irq;
 module_param_named(irq, timer_irq, int, 0644);
 MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks.");
 
diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c
index 46e899a..1c3849f 100644
--- a/drivers/crypto/amcc/crypto4xx_core.c
+++ b/drivers/crypto/amcc/crypto4xx_core.c
@@ -1274,7 +1274,7 @@
 	return 0;
 }
 
-static struct of_device_id crypto4xx_match[] = {
+static const struct of_device_id crypto4xx_match[] = {
 	{ .compatible      = "amcc,ppc4xx-crypto",},
 	{ },
 };
diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c
index 4801162..c7a5a43 100644
--- a/drivers/crypto/geode-aes.c
+++ b/drivers/crypto/geode-aes.c
@@ -135,13 +135,13 @@
 	/*
 	 * The requested key size is not supported by HW, do a fallback
 	 */
-	op->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
-	op->fallback.blk->base.crt_flags |= (tfm->crt_flags & CRYPTO_TFM_REQ_MASK);
+	op->fallback.cip->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
+	op->fallback.cip->base.crt_flags |= (tfm->crt_flags & CRYPTO_TFM_REQ_MASK);
 
 	ret = crypto_cipher_setkey(op->fallback.cip, key, len);
 	if (ret) {
 		tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
-		tfm->crt_flags |= (op->fallback.blk->base.crt_flags & CRYPTO_TFM_RES_MASK);
+		tfm->crt_flags |= (op->fallback.cip->base.crt_flags & CRYPTO_TFM_RES_MASK);
 	}
 	return ret;
 }
@@ -263,7 +263,7 @@
 
 	if (IS_ERR(op->fallback.cip)) {
 		printk(KERN_ERR "Error allocating fallback algo %s\n", name);
-		return PTR_ERR(op->fallback.blk);
+		return PTR_ERR(op->fallback.cip);
 	}
 
 	return 0;
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index c47ffe8..fd529d6 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1958,7 +1958,7 @@
 	return err;
 }
 
-static struct of_device_id talitos_match[] = {
+static const struct of_device_id talitos_match[] = {
 	{
 		.compatible = "fsl,sec2.0",
 	},
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index cbaf420..2d3dc7d 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -893,20 +893,31 @@
 
 static struct kmem_cache *fwnet_packet_task_cache;
 
+static void fwnet_free_ptask(struct fwnet_packet_task *ptask)
+{
+	dev_kfree_skb_any(ptask->skb);
+	kmem_cache_free(fwnet_packet_task_cache, ptask);
+}
+
 static int fwnet_send_packet(struct fwnet_packet_task *ptask);
 
 static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 {
-	struct fwnet_device *dev;
+	struct fwnet_device *dev = ptask->dev;
 	unsigned long flags;
-
-	dev = ptask->dev;
+	bool free;
 
 	spin_lock_irqsave(&dev->lock, flags);
-	list_del(&ptask->pt_link);
-	spin_unlock_irqrestore(&dev->lock, flags);
 
-	ptask->outstanding_pkts--; /* FIXME access inside lock */
+	ptask->outstanding_pkts--;
+
+	/* Check whether we or the networking TX soft-IRQ is last user. */
+	free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+
+	if (ptask->outstanding_pkts == 0)
+		list_del(&ptask->pt_link);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
 
 	if (ptask->outstanding_pkts > 0) {
 		u16 dg_size;
@@ -951,10 +962,10 @@
 			ptask->max_payload = skb->len + RFC2374_FRAG_HDR_SIZE;
 		}
 		fwnet_send_packet(ptask);
-	} else {
-		dev_kfree_skb_any(ptask->skb);
-		kmem_cache_free(fwnet_packet_task_cache, ptask);
 	}
+
+	if (free)
+		fwnet_free_ptask(ptask);
 }
 
 static void fwnet_write_complete(struct fw_card *card, int rcode,
@@ -977,6 +988,7 @@
 	unsigned tx_len;
 	struct rfc2734_header *bufhdr;
 	unsigned long flags;
+	bool free;
 
 	dev = ptask->dev;
 	tx_len = ptask->max_payload;
@@ -1022,12 +1034,16 @@
 				generation, SCODE_100, 0ULL, ptask->skb->data,
 				tx_len + 8, fwnet_write_complete, ptask);
 
-		/* FIXME race? */
 		spin_lock_irqsave(&dev->lock, flags);
-		list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+
+		/* If the AT tasklet already ran, we may be last user. */
+		free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+		if (!free)
+			list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+
 		spin_unlock_irqrestore(&dev->lock, flags);
 
-		return 0;
+		goto out;
 	}
 
 	fw_send_request(dev->card, &ptask->transaction,
@@ -1035,12 +1051,19 @@
 			ptask->generation, ptask->speed, ptask->fifo_addr,
 			ptask->skb->data, tx_len, fwnet_write_complete, ptask);
 
-	/* FIXME race? */
 	spin_lock_irqsave(&dev->lock, flags);
-	list_add_tail(&ptask->pt_link, &dev->sent_list);
+
+	/* If the AT tasklet already ran, we may be last user. */
+	free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+	if (!free)
+		list_add_tail(&ptask->pt_link, &dev->sent_list);
+
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	dev->netdev->trans_start = jiffies;
+ out:
+	if (free)
+		fwnet_free_ptask(ptask);
 
 	return 0;
 }
@@ -1298,6 +1321,8 @@
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	ptask->max_payload = max_payload;
+	INIT_LIST_HEAD(&ptask->pt_link);
+
 	fwnet_send_packet(ptask);
 
 	return NETDEV_TX_OK;
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 2345d41..43ebf33 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -2101,11 +2101,6 @@
 	u32 payload_index, payload_end_index, next_page_index;
 	int page, end_page, i, length, offset;
 
-	/*
-	 * FIXME: Cycle lost behavior should be configurable: lose
-	 * packet, retransmit or terminate..
-	 */
-
 	p = packet;
 	payload_index = payload;
 
@@ -2135,6 +2130,14 @@
 	if (!p->skip) {
 		d[0].control   = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE);
 		d[0].req_count = cpu_to_le16(8);
+		/*
+		 * Link the skip address to this descriptor itself.  This causes
+		 * a context to skip a cycle whenever lost cycles or FIFO
+		 * overruns occur, without dropping the data.  The application
+		 * should then decide whether this is an error condition or not.
+		 * FIXME:  Make the context's cycle-lost behaviour configurable?
+		 */
+		d[0].branch_address = cpu_to_le32(d_bus | z);
 
 		header = (__le32 *) &d[1];
 		header[0] = cpu_to_le32(IT_HEADER_SY(p->sy) |
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index f665b05..ab6c973 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -598,6 +598,50 @@
 	return mode;
 }
 
+/*
+ * EDID is delightfully ambiguous about how interlaced modes are to be
+ * encoded.  Our internal representation is of frame height, but some
+ * HDTV detailed timings are encoded as field height.
+ *
+ * The format list here is from CEA, in frame size.  Technically we
+ * should be checking refresh rate too.  Whatever.
+ */
+static void
+drm_mode_do_interlace_quirk(struct drm_display_mode *mode,
+			    struct detailed_pixel_timing *pt)
+{
+	int i;
+	static const struct {
+		int w, h;
+	} cea_interlaced[] = {
+		{ 1920, 1080 },
+		{  720,  480 },
+		{ 1440,  480 },
+		{ 2880,  480 },
+		{  720,  576 },
+		{ 1440,  576 },
+		{ 2880,  576 },
+	};
+	static const int n_sizes =
+		sizeof(cea_interlaced)/sizeof(cea_interlaced[0]);
+
+	if (!(pt->misc & DRM_EDID_PT_INTERLACED))
+		return;
+
+	for (i = 0; i < n_sizes; i++) {
+		if ((mode->hdisplay == cea_interlaced[i].w) &&
+		    (mode->vdisplay == cea_interlaced[i].h / 2)) {
+			mode->vdisplay *= 2;
+			mode->vsync_start *= 2;
+			mode->vsync_end *= 2;
+			mode->vtotal *= 2;
+			mode->vtotal |= 1;
+		}
+	}
+
+	mode->flags |= DRM_MODE_FLAG_INTERLACE;
+}
+
 /**
  * drm_mode_detailed - create a new mode from an EDID detailed timing section
  * @dev: DRM device (needed to create new mode)
@@ -680,8 +724,7 @@
 
 	drm_mode_set_name(mode);
 
-	if (pt->misc & DRM_EDID_PT_INTERLACED)
-		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+	drm_mode_do_interlace_quirk(mode, pt);
 
 	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
 		pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index cdec329..2ac074c8 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -405,7 +405,8 @@
 				wasted += alignment - tmp;
 		}
 
-		if (entry->size >= size + wasted) {
+		if (entry->size >= size + wasted &&
+		    (entry->start + wasted + size) <= end) {
 			if (!best_match)
 				return entry;
 			if (entry->size < best_size) {
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 79beffc..cf4cb3e 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -176,6 +176,8 @@
 
 static int i915_drm_freeze(struct drm_device *dev)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
 	pci_save_state(dev->pdev);
 
 	/* If KMS is active, we do the leavevt stuff here */
@@ -191,17 +193,12 @@
 
 	i915_save_state(dev);
 
-	return 0;
-}
-
-static void i915_drm_suspend(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
 	intel_opregion_free(dev, 1);
 
 	/* Modeset on resume, not lid events */
 	dev_priv->modeset_on_lid = 0;
+
+	return 0;
 }
 
 static int i915_suspend(struct drm_device *dev, pm_message_t state)
@@ -221,8 +218,6 @@
 	if (error)
 		return error;
 
-	i915_drm_suspend(dev);
-
 	if (state.event == PM_EVENT_SUSPEND) {
 		/* Shut down the device */
 		pci_disable_device(dev->pdev);
@@ -237,6 +232,10 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int error = 0;
 
+	i915_restore_state(dev);
+
+	intel_opregion_init(dev, 1);
+
 	/* KMS EnterVT equivalent */
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		mutex_lock(&dev->struct_mutex);
@@ -263,10 +262,6 @@
 
 	pci_set_master(dev->pdev);
 
-	i915_restore_state(dev);
-
-	intel_opregion_init(dev, 1);
-
 	return i915_drm_thaw(dev);
 }
 
@@ -423,8 +418,6 @@
 	if (error)
 		return error;
 
-	i915_drm_suspend(drm_dev);
-
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
 
@@ -464,13 +457,8 @@
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct drm_device *drm_dev = pci_get_drvdata(pdev);
-	int error;
 
-	error = i915_drm_freeze(drm_dev);
-	if (!error)
-		i915_drm_suspend(drm_dev);
-
-	return error;
+	return i915_drm_freeze(drm_dev);
 }
 
 const struct dev_pm_ops i915_pm_ops = {
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index b1d0acb..c2e8a45 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -636,6 +636,13 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
 		},
 	},
+	{
+		.ident = "Clevo M5x0N",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+			DMI_MATCH(DMI_BOARD_NAME, "M5x0N"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 2cd0fad..0e9cd1d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -5861,13 +5861,12 @@
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nvbios *bios = &dev_priv->VBIOS;
 	struct init_exec iexec = { true, false };
-	unsigned long flags;
 
-	spin_lock_irqsave(&bios->lock, flags);
+	mutex_lock(&bios->lock);
 	bios->display.output = dcbent;
 	parse_init_table(bios, table, &iexec);
 	bios->display.output = NULL;
-	spin_unlock_irqrestore(&bios->lock, flags);
+	mutex_unlock(&bios->lock);
 }
 
 static bool NVInitVBIOS(struct drm_device *dev)
@@ -5876,7 +5875,7 @@
 	struct nvbios *bios = &dev_priv->VBIOS;
 
 	memset(bios, 0, sizeof(struct nvbios));
-	spin_lock_init(&bios->lock);
+	mutex_init(&bios->lock);
 	bios->dev = dev;
 
 	if (!NVShadowVBIOS(dev, bios->data))
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h
index 68446fd..fd94bd6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.h
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.h
@@ -205,7 +205,7 @@
 	struct drm_device *dev;
 	struct nouveau_bios_info pub;
 
-	spinlock_t lock;
+	struct mutex lock;
 
 	uint8_t data[NV_PROM_SIZE];
 	unsigned int length;
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 5445cef..1c15ef3 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -583,6 +583,7 @@
 	uint64_t vm_end;
 	struct nouveau_gpuobj *vm_vram_pt[NV50_VM_VRAM_NR];
 	int vm_vram_pt_nr;
+	uint64_t vram_sys_base;
 
 	/* the mtrr covering the FB */
 	int fb_mtrr;
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index 8f3a12f..2dc09db 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -285,53 +285,50 @@
 			uint32_t flags, uint64_t phys)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nouveau_gpuobj **pgt;
-	unsigned psz, pfl, pages;
+	struct nouveau_gpuobj *pgt;
+	unsigned block;
+	int i;
 
-	if (virt >= dev_priv->vm_gart_base &&
-	    (virt + size) < (dev_priv->vm_gart_base + dev_priv->vm_gart_size)) {
-		psz = 12;
-		pgt = &dev_priv->gart_info.sg_ctxdma;
-		pfl = 0x21;
-		virt -= dev_priv->vm_gart_base;
-	} else
-	if (virt >= dev_priv->vm_vram_base &&
-	    (virt + size) < (dev_priv->vm_vram_base + dev_priv->vm_vram_size)) {
-		psz = 16;
-		pgt = dev_priv->vm_vram_pt;
-		pfl = 0x01;
-		virt -= dev_priv->vm_vram_base;
-	} else {
-		NV_ERROR(dev, "Invalid address: 0x%16llx-0x%16llx\n",
-			 virt, virt + size - 1);
-		return -EINVAL;
+	virt = ((virt - dev_priv->vm_vram_base) >> 16) << 1;
+	size = (size >> 16) << 1;
+
+	phys |= ((uint64_t)flags << 32);
+	phys |= 1;
+	if (dev_priv->vram_sys_base) {
+		phys += dev_priv->vram_sys_base;
+		phys |= 0x30;
 	}
 
-	pages = size >> psz;
-
 	dev_priv->engine.instmem.prepare_access(dev, true);
-	if (flags & 0x80000000) {
-		while (pages--) {
-			struct nouveau_gpuobj *pt = pgt[virt >> 29];
-			unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1;
+	while (size) {
+		unsigned offset_h = upper_32_bits(phys);
+		unsigned offset_l = lower_32_bits(phys);
+		unsigned pte, end;
 
-			nv_wo32(dev, pt, pte++, 0x00000000);
-			nv_wo32(dev, pt, pte++, 0x00000000);
-
-			virt += (1 << psz);
+		for (i = 7; i >= 0; i--) {
+			block = 1 << (i + 1);
+			if (size >= block && !(virt & (block - 1)))
+				break;
 		}
-	} else {
-		while (pages--) {
-			struct nouveau_gpuobj *pt = pgt[virt >> 29];
-			unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1;
-			unsigned offset_h = upper_32_bits(phys) & 0xff;
-			unsigned offset_l = lower_32_bits(phys);
+		offset_l |= (i << 7);
 
-			nv_wo32(dev, pt, pte++, offset_l | pfl);
-			nv_wo32(dev, pt, pte++, offset_h | flags);
+		phys += block << 15;
+		size -= block;
 
-			phys += (1 << psz);
-			virt += (1 << psz);
+		while (block) {
+			pgt = dev_priv->vm_vram_pt[virt >> 14];
+			pte = virt & 0x3ffe;
+
+			end = pte + block;
+			if (end > 16384)
+				end = 16384;
+			block -= (end - pte);
+			virt  += (end - pte);
+
+			while (pte < end) {
+				nv_wo32(dev, pgt, pte++, offset_l);
+				nv_wo32(dev, pgt, pte++, offset_h);
+			}
 		}
 	}
 	dev_priv->engine.instmem.finish_access(dev);
@@ -356,7 +353,41 @@
 void
 nv50_mem_vm_unbind(struct drm_device *dev, uint64_t virt, uint32_t size)
 {
-	nv50_mem_vm_bind_linear(dev, virt, size, 0x80000000, 0);
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_gpuobj *pgt;
+	unsigned pages, pte, end;
+
+	virt -= dev_priv->vm_vram_base;
+	pages = (size >> 16) << 1;
+
+	dev_priv->engine.instmem.prepare_access(dev, true);
+	while (pages) {
+		pgt = dev_priv->vm_vram_pt[virt >> 29];
+		pte = (virt & 0x1ffe0000ULL) >> 15;
+
+		end = pte + pages;
+		if (end > 16384)
+			end = 16384;
+		pages -= (end - pte);
+		virt  += (end - pte) << 15;
+
+		while (pte < end)
+			nv_wo32(dev, pgt, pte++, 0);
+	}
+	dev_priv->engine.instmem.finish_access(dev);
+
+	nv_wr32(dev, 0x100c80, 0x00050001);
+	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+		return;
+	}
+
+	nv_wr32(dev, 0x100c80, 0x00000001);
+	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+	}
 }
 
 /*
diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c
index d0e038d..1d73b15 100644
--- a/drivers/gpu/drm/nouveau/nv04_dac.c
+++ b/drivers/gpu/drm/nouveau/nv04_dac.c
@@ -119,7 +119,7 @@
 						 struct drm_connector *connector)
 {
 	struct drm_device *dev = encoder->dev;
-	uint8_t saved_seq1, saved_pi, saved_rpc1;
+	uint8_t saved_seq1, saved_pi, saved_rpc1, saved_cr_mode;
 	uint8_t saved_palette0[3], saved_palette_mask;
 	uint32_t saved_rtest_ctrl, saved_rgen_ctrl;
 	int i;
@@ -135,6 +135,9 @@
 		/* only implemented for head A for now */
 		NVSetOwner(dev, 0);
 
+	saved_cr_mode = NVReadVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX);
+	NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode | 0x80);
+
 	saved_seq1 = NVReadVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX);
 	NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1 & ~0x20);
 
@@ -203,6 +206,7 @@
 	NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_PIXEL_INDEX, saved_pi);
 	NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_RPC1_INDEX, saved_rpc1);
 	NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1);
+	NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode);
 
 	if (blue == 0x18) {
 		NV_INFO(dev, "Load detected on head A\n");
diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c
index 58b917c..21ac6e4 100644
--- a/drivers/gpu/drm/nouveau/nv17_tv.c
+++ b/drivers/gpu/drm/nouveau/nv17_tv.c
@@ -579,6 +579,8 @@
 				nouveau_encoder(encoder)->restore.output);
 
 	nv17_tv_state_load(dev, &to_tv_enc(encoder)->saved_state);
+
+	nouveau_encoder(encoder)->last_dpms = NV_DPMS_CLEARED;
 }
 
 static int nv17_tv_create_resources(struct drm_encoder *encoder,
diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c
index 94400f7..f0dc4e3 100644
--- a/drivers/gpu/drm/nouveau/nv50_instmem.c
+++ b/drivers/gpu/drm/nouveau/nv50_instmem.c
@@ -76,6 +76,11 @@
 	for (i = 0x1700; i <= 0x1710; i += 4)
 		priv->save1700[(i-0x1700)/4] = nv_rd32(dev, i);
 
+	if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac)
+		dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12;
+	else
+		dev_priv->vram_sys_base = 0;
+
 	/* Reserve the last MiB of VRAM, we should probably try to avoid
 	 * setting up the below tables over the top of the VBIOS image at
 	 * some point.
@@ -172,16 +177,28 @@
 	 * We map the entire fake channel into the start of the PRAMIN BAR
 	 */
 	ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pt_size, 0x1000,
-							0, &priv->pramin_pt);
+				     0, &priv->pramin_pt);
 	if (ret)
 		return ret;
 
-	for (i = 0, v = c_offset; i < pt_size; i += 8, v += 0x1000) {
-		if (v < (c_offset + c_size))
-			BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v | 1);
-		else
-			BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000009);
+	v = c_offset | 1;
+	if (dev_priv->vram_sys_base) {
+		v += dev_priv->vram_sys_base;
+		v |= 0x30;
+	}
+
+	i = 0;
+	while (v < dev_priv->vram_sys_base + c_offset + c_size) {
+		BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v);
 		BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000);
+		v += 0x1000;
+		i += 8;
+	}
+
+	while (i < pt_size) {
+		BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000000);
+		BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000);
+		i += 8;
 	}
 
 	BAR0_WI32(chan->vm_pd, 0x00, priv->pramin_pt->instance | 0x63);
@@ -416,7 +433,9 @@
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nv50_instmem_priv *priv = dev_priv->engine.instmem.priv;
-	uint32_t pte, pte_end, vram;
+	struct nouveau_gpuobj *pramin_pt = priv->pramin_pt->gpuobj;
+	uint32_t pte, pte_end;
+	uint64_t vram;
 
 	if (!gpuobj->im_backing || !gpuobj->im_pramin || gpuobj->im_bound)
 		return -EINVAL;
@@ -424,20 +443,24 @@
 	NV_DEBUG(dev, "st=0x%0llx sz=0x%0llx\n",
 		 gpuobj->im_pramin->start, gpuobj->im_pramin->size);
 
-	pte     = (gpuobj->im_pramin->start >> 12) << 3;
-	pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte;
+	pte     = (gpuobj->im_pramin->start >> 12) << 1;
+	pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
 	vram    = gpuobj->im_backing_start;
 
 	NV_DEBUG(dev, "pramin=0x%llx, pte=%d, pte_end=%d\n",
 		 gpuobj->im_pramin->start, pte, pte_end);
 	NV_DEBUG(dev, "first vram page: 0x%08x\n", gpuobj->im_backing_start);
 
+	vram |= 1;
+	if (dev_priv->vram_sys_base) {
+		vram += dev_priv->vram_sys_base;
+		vram |= 0x30;
+	}
+
 	dev_priv->engine.instmem.prepare_access(dev, true);
 	while (pte < pte_end) {
-		nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, vram | 1);
-		nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000);
-
-		pte += 8;
+		nv_wo32(dev, pramin_pt, pte++, lower_32_bits(vram));
+		nv_wo32(dev, pramin_pt, pte++, upper_32_bits(vram));
 		vram += NV50_INSTMEM_PAGE_SIZE;
 	}
 	dev_priv->engine.instmem.finish_access(dev);
@@ -470,14 +493,13 @@
 	if (gpuobj->im_bound == 0)
 		return -EINVAL;
 
-	pte     = (gpuobj->im_pramin->start >> 12) << 3;
-	pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte;
+	pte     = (gpuobj->im_pramin->start >> 12) << 1;
+	pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
 
 	dev_priv->engine.instmem.prepare_access(dev, true);
 	while (pte < pte_end) {
-		nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, 0x00000009);
-		nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000);
-		pte += 8;
+		nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
+		nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
 	}
 	dev_priv->engine.instmem.finish_access(dev);
 
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index e3b4456..7f152f6 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -24,6 +24,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <asm/unaligned.h>
 
 #define ATOM_DEBUG
 
@@ -212,7 +213,9 @@
 	case ATOM_ARG_PS:
 		idx = U8(*ptr);
 		(*ptr)++;
-		val = le32_to_cpu(ctx->ps[idx]);
+		/* get_unaligned_le32 avoids unaligned accesses from atombios
+		 * tables, noticed on a DEC Alpha. */
+		val = get_unaligned_le32((u32 *)&ctx->ps[idx]);
 		if (print)
 			DEBUG("PS[0x%02X,0x%04X]", idx, val);
 		break;
@@ -640,7 +643,7 @@
 	uint8_t count = U8((*ptr)++);
 	SDEBUG("   count: %d\n", count);
 	if (arg == ATOM_UNIT_MICROSEC)
-		schedule_timeout_uninterruptible(usecs_to_jiffies(count));
+		udelay(count);
 	else
 		schedule_timeout_uninterruptible(msecs_to_jiffies(count));
 }
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index b32eeea..99915a6 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -350,7 +350,7 @@
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 
 	if (args.ucReplyStatus && !args.ucDataOutLen) {
-		if (args.ucReplyStatus == 0x20 && retry_count < 10)
+		if (args.ucReplyStatus == 0x20 && retry_count++ < 10)
 			goto retry;
 		DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x after %d retries\n",
 			  req_bytes[1], req_bytes[0], req_bytes[2], req_bytes[3],
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index af1c3ca..446b765 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -543,9 +543,6 @@
 void r600_vb_ib_put(struct radeon_device *rdev)
 {
 	radeon_fence_emit(rdev, rdev->r600_blit.vb_ib->fence);
-	mutex_lock(&rdev->ib_pool.mutex);
-	list_add_tail(&rdev->r600_blit.vb_ib->list, &rdev->ib_pool.scheduled_ibs);
-	mutex_unlock(&rdev->ib_pool.mutex);
 	radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
 }
 
diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c
index 6d5a711..75bcf35 100644
--- a/drivers/gpu/drm/radeon/r600_cp.c
+++ b/drivers/gpu/drm/radeon/r600_cp.c
@@ -1428,9 +1428,12 @@
 
 	gb_tiling_config |= R600_BANK_SWAPS(1);
 
-	backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes,
-							dev_priv->r600_max_backends,
-							(0xff << dev_priv->r600_max_backends) & 0xff);
+	if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV740)
+		backend_map = 0x28;
+	else
+		backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes,
+								dev_priv->r600_max_backends,
+								(0xff << dev_priv->r600_max_backends) & 0xff);
 	gb_tiling_config |= R600_BACKEND_MAP(backend_map);
 
 	cc_gc_shader_pipe_config =
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index f57480b..c0356bb 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -96,6 +96,7 @@
  * symbol;
  */
 #define RADEON_MAX_USEC_TIMEOUT		100000	/* 100 ms */
+/* RADEON_IB_POOL_SIZE must be a power of 2 */
 #define RADEON_IB_POOL_SIZE		16
 #define RADEON_DEBUGFS_MAX_NUM_FILES	32
 #define RADEONFB_CONN_LIMIT		4
@@ -363,11 +364,12 @@
  */
 struct radeon_ib {
 	struct list_head	list;
-	unsigned long		idx;
+	unsigned		idx;
 	uint64_t		gpu_addr;
 	struct radeon_fence	*fence;
-	uint32_t	*ptr;
+	uint32_t		*ptr;
 	uint32_t		length_dw;
+	bool			free;
 };
 
 /*
@@ -377,10 +379,9 @@
 struct radeon_ib_pool {
 	struct mutex		mutex;
 	struct radeon_bo	*robj;
-	struct list_head	scheduled_ibs;
 	struct radeon_ib	ibs[RADEON_IB_POOL_SIZE];
 	bool			ready;
-	DECLARE_BITMAP(alloc_bm, RADEON_IB_POOL_SIZE);
+	unsigned		head_id;
 };
 
 struct radeon_cp {
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 2dcda61..4d88315 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -206,6 +206,15 @@
 			*connector_type = DRM_MODE_CONNECTOR_DVID;
 	}
 
+	/* Asrock RS600 board lists the DVI port as HDMI */
+	if ((dev->pdev->device == 0x7941) &&
+	    (dev->pdev->subsystem_vendor == 0x1849) &&
+	    (dev->pdev->subsystem_device == 0x7941)) {
+		if ((*connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
+		    (supported_device == ATOM_DEVICE_DFP3_SUPPORT))
+			*connector_type = DRM_MODE_CONNECTOR_DVID;
+	}
+
 	/* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */
 	if ((dev->pdev->device == 0x7941) &&
 	    (dev->pdev->subsystem_vendor == 0x147b) &&
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index e7b1944..22d4761 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1279,47 +1279,47 @@
 	rdev->mode_info.connector_table = radeon_connector_table;
 	if (rdev->mode_info.connector_table == CT_NONE) {
 #ifdef CONFIG_PPC_PMAC
-		if (machine_is_compatible("PowerBook3,3")) {
+		if (of_machine_is_compatible("PowerBook3,3")) {
 			/* powerbook with VGA */
 			rdev->mode_info.connector_table = CT_POWERBOOK_VGA;
-		} else if (machine_is_compatible("PowerBook3,4") ||
-			   machine_is_compatible("PowerBook3,5")) {
+		} else if (of_machine_is_compatible("PowerBook3,4") ||
+			   of_machine_is_compatible("PowerBook3,5")) {
 			/* powerbook with internal tmds */
 			rdev->mode_info.connector_table = CT_POWERBOOK_INTERNAL;
-		} else if (machine_is_compatible("PowerBook5,1") ||
-			   machine_is_compatible("PowerBook5,2") ||
-			   machine_is_compatible("PowerBook5,3") ||
-			   machine_is_compatible("PowerBook5,4") ||
-			   machine_is_compatible("PowerBook5,5")) {
+		} else if (of_machine_is_compatible("PowerBook5,1") ||
+			   of_machine_is_compatible("PowerBook5,2") ||
+			   of_machine_is_compatible("PowerBook5,3") ||
+			   of_machine_is_compatible("PowerBook5,4") ||
+			   of_machine_is_compatible("PowerBook5,5")) {
 			/* powerbook with external single link tmds (sil164) */
 			rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
-		} else if (machine_is_compatible("PowerBook5,6")) {
+		} else if (of_machine_is_compatible("PowerBook5,6")) {
 			/* powerbook with external dual or single link tmds */
 			rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
-		} else if (machine_is_compatible("PowerBook5,7") ||
-			   machine_is_compatible("PowerBook5,8") ||
-			   machine_is_compatible("PowerBook5,9")) {
+		} else if (of_machine_is_compatible("PowerBook5,7") ||
+			   of_machine_is_compatible("PowerBook5,8") ||
+			   of_machine_is_compatible("PowerBook5,9")) {
 			/* PowerBook6,2 ? */
 			/* powerbook with external dual link tmds (sil1178?) */
 			rdev->mode_info.connector_table = CT_POWERBOOK_EXTERNAL;
-		} else if (machine_is_compatible("PowerBook4,1") ||
-			   machine_is_compatible("PowerBook4,2") ||
-			   machine_is_compatible("PowerBook4,3") ||
-			   machine_is_compatible("PowerBook6,3") ||
-			   machine_is_compatible("PowerBook6,5") ||
-			   machine_is_compatible("PowerBook6,7")) {
+		} else if (of_machine_is_compatible("PowerBook4,1") ||
+			   of_machine_is_compatible("PowerBook4,2") ||
+			   of_machine_is_compatible("PowerBook4,3") ||
+			   of_machine_is_compatible("PowerBook6,3") ||
+			   of_machine_is_compatible("PowerBook6,5") ||
+			   of_machine_is_compatible("PowerBook6,7")) {
 			/* ibook */
 			rdev->mode_info.connector_table = CT_IBOOK;
-		} else if (machine_is_compatible("PowerMac4,4")) {
+		} else if (of_machine_is_compatible("PowerMac4,4")) {
 			/* emac */
 			rdev->mode_info.connector_table = CT_EMAC;
-		} else if (machine_is_compatible("PowerMac10,1")) {
+		} else if (of_machine_is_compatible("PowerMac10,1")) {
 			/* mini with internal tmds */
 			rdev->mode_info.connector_table = CT_MINI_INTERNAL;
-		} else if (machine_is_compatible("PowerMac10,2")) {
+		} else if (of_machine_is_compatible("PowerMac10,2")) {
 			/* mini with external tmds */
 			rdev->mode_info.connector_table = CT_MINI_EXTERNAL;
-		} else if (machine_is_compatible("PowerMac12,1")) {
+		} else if (of_machine_is_compatible("PowerMac12,1")) {
 			/* PowerMac8,1 ? */
 			/* imac g5 isight */
 			rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 2381885..65f8194 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -780,7 +780,7 @@
 			 * connected and the DVI port disconnected.  If the edid doesn't
 			 * say HDMI, vice versa.
 			 */
-			if (radeon_connector->shared_ddc && connector_status_connected) {
+			if (radeon_connector->shared_ddc && (ret == connector_status_connected)) {
 				struct drm_device *dev = connector->dev;
 				struct drm_connector *list_connector;
 				struct radeon_connector *list_radeon_connector;
@@ -1060,8 +1060,7 @@
 			return;
 		}
 		if (radeon_connector->ddc_bus && i2c_bus->valid) {
-			if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus,
-				    sizeof(struct radeon_i2c_bus_rec)) == 0) {
+			if (radeon_connector->ddc_bus->rec.i2c_id == i2c_bus->i2c_id) {
 				radeon_connector->shared_ddc = true;
 				shared_ddc = true;
 			}
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index 1190148..e9d0850 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -86,7 +86,7 @@
 						&p->validated);
 		}
 	}
-	return radeon_bo_list_validate(&p->validated, p->ib->fence);
+	return radeon_bo_list_validate(&p->validated);
 }
 
 int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
@@ -189,12 +189,10 @@
 {
 	unsigned i;
 
-	if (error && parser->ib) {
-		radeon_bo_list_unvalidate(&parser->validated,
-						parser->ib->fence);
-	} else {
-		radeon_bo_list_unreserve(&parser->validated);
+	if (!error && parser->ib) {
+		radeon_bo_list_fence(&parser->validated, parser->ib->fence);
 	}
+	radeon_bo_list_unreserve(&parser->validated);
 	for (i = 0; i < parser->nrelocs; i++) {
 		if (parser->relocs[i].gobj) {
 			mutex_lock(&parser->rdev->ddev->struct_mutex);
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index e137852..c57ad60 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -106,9 +106,10 @@
  * 1.29- R500 3D cmd buffer support
  * 1.30- Add support for occlusion queries
  * 1.31- Add support for num Z pipes from GET_PARAM
+ * 1.32- fixes for rv740 setup
  */
 #define DRIVER_MAJOR		1
-#define DRIVER_MINOR		31
+#define DRIVER_MINOR		32
 #define DRIVER_PATCHLEVEL	0
 
 enum radeon_cp_microcode_version {
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index d72a71b..f1da370 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -306,11 +306,10 @@
 	}
 }
 
-int radeon_bo_list_validate(struct list_head *head, void *fence)
+int radeon_bo_list_validate(struct list_head *head)
 {
 	struct radeon_bo_list *lobj;
 	struct radeon_bo *bo;
-	struct radeon_fence *old_fence = NULL;
 	int r;
 
 	r = radeon_bo_list_reserve(head);
@@ -334,32 +333,27 @@
 		}
 		lobj->gpu_offset = radeon_bo_gpu_offset(bo);
 		lobj->tiling_flags = bo->tiling_flags;
-		if (fence) {
-			old_fence = (struct radeon_fence *)bo->tbo.sync_obj;
-			bo->tbo.sync_obj = radeon_fence_ref(fence);
-			bo->tbo.sync_obj_arg = NULL;
-		}
-		if (old_fence) {
-			radeon_fence_unref(&old_fence);
-		}
 	}
 	return 0;
 }
 
-void radeon_bo_list_unvalidate(struct list_head *head, void *fence)
+void radeon_bo_list_fence(struct list_head *head, void *fence)
 {
 	struct radeon_bo_list *lobj;
-	struct radeon_fence *old_fence;
+	struct radeon_bo *bo;
+	struct radeon_fence *old_fence = NULL;
 
-	if (fence)
-		list_for_each_entry(lobj, head, list) {
-			old_fence = to_radeon_fence(lobj->bo->tbo.sync_obj);
-			if (old_fence == fence) {
-				lobj->bo->tbo.sync_obj = NULL;
-				radeon_fence_unref(&old_fence);
-			}
+	list_for_each_entry(lobj, head, list) {
+		bo = lobj->bo;
+		spin_lock(&bo->tbo.lock);
+		old_fence = (struct radeon_fence *)bo->tbo.sync_obj;
+		bo->tbo.sync_obj = radeon_fence_ref(fence);
+		bo->tbo.sync_obj_arg = NULL;
+		spin_unlock(&bo->tbo.lock);
+		if (old_fence) {
+			radeon_fence_unref(&old_fence);
 		}
-	radeon_bo_list_unreserve(head);
+	}
 }
 
 int radeon_bo_fbdev_mmap(struct radeon_bo *bo,
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
index a02f180..7ab43de 100644
--- a/drivers/gpu/drm/radeon/radeon_object.h
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -156,8 +156,8 @@
 				struct list_head *head);
 extern int radeon_bo_list_reserve(struct list_head *head);
 extern void radeon_bo_list_unreserve(struct list_head *head);
-extern int radeon_bo_list_validate(struct list_head *head, void *fence);
-extern void radeon_bo_list_unvalidate(struct list_head *head, void *fence);
+extern int radeon_bo_list_validate(struct list_head *head);
+extern void radeon_bo_list_fence(struct list_head *head, void *fence);
 extern int radeon_bo_fbdev_mmap(struct radeon_bo *bo,
 				struct vm_area_struct *vma);
 extern int radeon_bo_set_tiling_flags(struct radeon_bo *bo,
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index 4d12b2d..6579eb4 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -41,68 +41,55 @@
 {
 	struct radeon_fence *fence;
 	struct radeon_ib *nib;
-	unsigned long i;
-	int r = 0;
+	int r = 0, i, c;
 
 	*ib = NULL;
 	r = radeon_fence_create(rdev, &fence);
 	if (r) {
-		DRM_ERROR("failed to create fence for new IB\n");
+		dev_err(rdev->dev, "failed to create fence for new IB\n");
 		return r;
 	}
 	mutex_lock(&rdev->ib_pool.mutex);
-	i = find_first_zero_bit(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
-	if (i < RADEON_IB_POOL_SIZE) {
-		set_bit(i, rdev->ib_pool.alloc_bm);
-		rdev->ib_pool.ibs[i].length_dw = 0;
-		*ib = &rdev->ib_pool.ibs[i];
-		mutex_unlock(&rdev->ib_pool.mutex);
-		goto out;
+	for (i = rdev->ib_pool.head_id, c = 0, nib = NULL; c < RADEON_IB_POOL_SIZE; c++, i++) {
+		i &= (RADEON_IB_POOL_SIZE - 1);
+		if (rdev->ib_pool.ibs[i].free) {
+			nib = &rdev->ib_pool.ibs[i];
+			break;
+		}
 	}
-	if (list_empty(&rdev->ib_pool.scheduled_ibs)) {
-		/* we go do nothings here */
+	if (nib == NULL) {
+		/* This should never happen, it means we allocated all
+		 * IB and haven't scheduled one yet, return EBUSY to
+		 * userspace hoping that on ioctl recall we get better
+		 * luck
+		 */
+		dev_err(rdev->dev, "no free indirect buffer !\n");
 		mutex_unlock(&rdev->ib_pool.mutex);
-		DRM_ERROR("all IB allocated none scheduled.\n");
-		r = -EINVAL;
-		goto out;
+		radeon_fence_unref(&fence);
+		return -EBUSY;
 	}
-	/* get the first ib on the scheduled list */
-	nib = list_entry(rdev->ib_pool.scheduled_ibs.next,
-			 struct radeon_ib, list);
-	if (nib->fence == NULL) {
-		/* we go do nothings here */
+	rdev->ib_pool.head_id = (nib->idx + 1) & (RADEON_IB_POOL_SIZE - 1);
+	nib->free = false;
+	if (nib->fence) {
 		mutex_unlock(&rdev->ib_pool.mutex);
-		DRM_ERROR("IB %lu scheduled without a fence.\n", nib->idx);
-		r = -EINVAL;
-		goto out;
-	}
-	mutex_unlock(&rdev->ib_pool.mutex);
-
-	r = radeon_fence_wait(nib->fence, false);
-	if (r) {
-		DRM_ERROR("radeon: IB(%lu:0x%016lX:%u)\n", nib->idx,
-			  (unsigned long)nib->gpu_addr, nib->length_dw);
-		DRM_ERROR("radeon: GPU lockup detected, fail to get a IB\n");
-		goto out;
+		r = radeon_fence_wait(nib->fence, false);
+		if (r) {
+			dev_err(rdev->dev, "error waiting fence of IB(%u:0x%016lX:%u)\n",
+				nib->idx, (unsigned long)nib->gpu_addr, nib->length_dw);
+			mutex_lock(&rdev->ib_pool.mutex);
+			nib->free = true;
+			mutex_unlock(&rdev->ib_pool.mutex);
+			radeon_fence_unref(&fence);
+			return r;
+		}
+		mutex_lock(&rdev->ib_pool.mutex);
 	}
 	radeon_fence_unref(&nib->fence);
-
+	nib->fence = fence;
 	nib->length_dw = 0;
-
-	/* scheduled list is accessed here */
-	mutex_lock(&rdev->ib_pool.mutex);
-	list_del(&nib->list);
-	INIT_LIST_HEAD(&nib->list);
 	mutex_unlock(&rdev->ib_pool.mutex);
-
 	*ib = nib;
-out:
-	if (r) {
-		radeon_fence_unref(&fence);
-	} else {
-		(*ib)->fence = fence;
-	}
-	return r;
+	return 0;
 }
 
 void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib)
@@ -113,19 +100,10 @@
 	if (tmp == NULL) {
 		return;
 	}
-	mutex_lock(&rdev->ib_pool.mutex);
-	if (!list_empty(&tmp->list) && !radeon_fence_signaled(tmp->fence)) {
-		/* IB is scheduled & not signaled don't do anythings */
-		mutex_unlock(&rdev->ib_pool.mutex);
-		return;
-	}
-	list_del(&tmp->list);
-	INIT_LIST_HEAD(&tmp->list);
-	if (tmp->fence)
+	if (!tmp->fence->emited)
 		radeon_fence_unref(&tmp->fence);
-
-	tmp->length_dw = 0;
-	clear_bit(tmp->idx, rdev->ib_pool.alloc_bm);
+	mutex_lock(&rdev->ib_pool.mutex);
+	tmp->free = true;
 	mutex_unlock(&rdev->ib_pool.mutex);
 }
 
@@ -135,7 +113,7 @@
 
 	if (!ib->length_dw || !rdev->cp.ready) {
 		/* TODO: Nothings in the ib we should report. */
-		DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx);
+		DRM_ERROR("radeon: couldn't schedule IB(%u).\n", ib->idx);
 		return -EINVAL;
 	}
 
@@ -148,7 +126,8 @@
 	radeon_ring_ib_execute(rdev, ib);
 	radeon_fence_emit(rdev, ib->fence);
 	mutex_lock(&rdev->ib_pool.mutex);
-	list_add_tail(&ib->list, &rdev->ib_pool.scheduled_ibs);
+	/* once scheduled IB is considered free and protected by the fence */
+	ib->free = true;
 	mutex_unlock(&rdev->ib_pool.mutex);
 	radeon_ring_unlock_commit(rdev);
 	return 0;
@@ -164,7 +143,6 @@
 	if (rdev->ib_pool.robj)
 		return 0;
 	/* Allocate 1M object buffer */
-	INIT_LIST_HEAD(&rdev->ib_pool.scheduled_ibs);
 	r = radeon_bo_create(rdev, NULL,  RADEON_IB_POOL_SIZE*64*1024,
 				true, RADEON_GEM_DOMAIN_GTT,
 				&rdev->ib_pool.robj);
@@ -195,9 +173,9 @@
 		rdev->ib_pool.ibs[i].ptr = ptr + offset;
 		rdev->ib_pool.ibs[i].idx = i;
 		rdev->ib_pool.ibs[i].length_dw = 0;
-		INIT_LIST_HEAD(&rdev->ib_pool.ibs[i].list);
+		rdev->ib_pool.ibs[i].free = true;
 	}
-	bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
+	rdev->ib_pool.head_id = 0;
 	rdev->ib_pool.ready = true;
 	DRM_INFO("radeon: ib pool ready.\n");
 	if (radeon_debugfs_ib_init(rdev)) {
@@ -214,7 +192,6 @@
 		return;
 	}
 	mutex_lock(&rdev->ib_pool.mutex);
-	bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
 	if (rdev->ib_pool.robj) {
 		r = radeon_bo_reserve(rdev->ib_pool.robj, false);
 		if (likely(r == 0)) {
@@ -363,7 +340,7 @@
 	if (ib == NULL) {
 		return 0;
 	}
-	seq_printf(m, "IB %04lu\n", ib->idx);
+	seq_printf(m, "IB %04u\n", ib->idx);
 	seq_printf(m, "IB fence %p\n", ib->fence);
 	seq_printf(m, "IB size %05u dwords\n", ib->length_dw);
 	for (i = 0; i < ib->length_dw; i++) {
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 5943d56..0302167 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -549,9 +549,12 @@
 
 	gb_tiling_config |= BANK_SWAPS(1);
 
-	backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes,
-							rdev->config.rv770.max_backends,
-							(0xff << rdev->config.rv770.max_backends) & 0xff);
+	if (rdev->family == CHIP_RV740)
+		backend_map = 0x28;
+	else
+		backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes,
+								rdev->config.rv770.max_backends,
+								(0xff << rdev->config.rv770.max_backends) & 0xff);
 	gb_tiling_config |= BACKEND_MAP(backend_map);
 
 	cc_gc_shader_pipe_config =
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 1a3e909..c7320ce 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1020,6 +1020,12 @@
 			     struct ttm_mem_reg *mem)
 {
 	int i;
+	struct drm_mm_node *node = mem->mm_node;
+
+	if (node && placement->lpfn != 0 &&
+	    (node->start < placement->fpfn ||
+	     node->start + node->size > placement->lpfn))
+		return -1;
 
 	for (i = 0; i < placement->num_placement; i++) {
 		if ((placement->placement[i] & mem->placement &
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index e2123af..3d47a2c 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -196,14 +196,15 @@
 
 #ifdef CONFIG_X86
 static inline int ttm_tt_set_page_caching(struct page *p,
-					  enum ttm_caching_state c_state)
+					  enum ttm_caching_state c_old,
+					  enum ttm_caching_state c_new)
 {
 	int ret = 0;
 
 	if (PageHighMem(p))
 		return 0;
 
-	if (get_page_memtype(p) != -1) {
+	if (c_old != tt_cached) {
 		/* p isn't in the default caching state, set it to
 		 * writeback first to free its current memtype. */
 
@@ -212,16 +213,17 @@
 			return ret;
 	}
 
-	if (c_state == tt_wc)
+	if (c_new == tt_wc)
 		ret = set_memory_wc((unsigned long) page_address(p), 1);
-	else if (c_state == tt_uncached)
+	else if (c_new == tt_uncached)
 		ret = set_pages_uc(p, 1);
 
 	return ret;
 }
 #else /* CONFIG_X86 */
 static inline int ttm_tt_set_page_caching(struct page *p,
-					  enum ttm_caching_state c_state)
+					  enum ttm_caching_state c_old,
+					  enum ttm_caching_state c_new)
 {
 	return 0;
 }
@@ -254,7 +256,9 @@
 	for (i = 0; i < ttm->num_pages; ++i) {
 		cur_page = ttm->pages[i];
 		if (likely(cur_page != NULL)) {
-			ret = ttm_tt_set_page_caching(cur_page, c_state);
+			ret = ttm_tt_set_page_caching(cur_page,
+						      ttm->caching_state,
+						      c_state);
 			if (unlikely(ret != 0))
 				goto out_err;
 		}
@@ -268,7 +272,7 @@
 	for (j = 0; j < i; ++j) {
 		cur_page = ttm->pages[j];
 		if (likely(cur_page != NULL)) {
-			(void)ttm_tt_set_page_caching(cur_page,
+			(void)ttm_tt_set_page_caching(cur_page, c_state,
 						      ttm->caching_state);
 		}
 	}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index a6e8f68..0c9c081 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -348,22 +348,19 @@
 		 */
 
 		DRM_INFO("It appears like vesafb is loaded. "
-			 "Ignore above error if any. Entering stealth mode.\n");
+			 "Ignore above error if any.\n");
 		ret = pci_request_region(dev->pdev, 2, "vmwgfx stealth probe");
 		if (unlikely(ret != 0)) {
 			DRM_ERROR("Failed reserving the SVGA MMIO resource.\n");
 			goto out_no_device;
 		}
-		vmw_kms_init(dev_priv);
-		vmw_overlay_init(dev_priv);
-	} else {
-		ret = vmw_request_device(dev_priv);
-		if (unlikely(ret != 0))
-			goto out_no_device;
-		vmw_kms_init(dev_priv);
-		vmw_overlay_init(dev_priv);
-		vmw_fb_init(dev_priv);
 	}
+	ret = vmw_request_device(dev_priv);
+	if (unlikely(ret != 0))
+		goto out_no_device;
+	vmw_kms_init(dev_priv);
+	vmw_overlay_init(dev_priv);
+	vmw_fb_init(dev_priv);
 
 	dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier;
 	register_pm_notifier(&dev_priv->pm_nb);
@@ -406,17 +403,15 @@
 
 	unregister_pm_notifier(&dev_priv->pm_nb);
 
-	if (!dev_priv->stealth) {
-		vmw_fb_close(dev_priv);
-		vmw_kms_close(dev_priv);
-		vmw_overlay_close(dev_priv);
-		vmw_release_device(dev_priv);
-		pci_release_regions(dev->pdev);
-	} else {
-		vmw_kms_close(dev_priv);
-		vmw_overlay_close(dev_priv);
+	vmw_fb_close(dev_priv);
+	vmw_kms_close(dev_priv);
+	vmw_overlay_close(dev_priv);
+	vmw_release_device(dev_priv);
+	if (dev_priv->stealth)
 		pci_release_region(dev->pdev, 2);
-	}
+	else
+		pci_release_regions(dev->pdev);
+
 	if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
 		drm_irq_uninstall(dev_priv->dev);
 	if (dev->devname == vmw_devname)
@@ -585,11 +580,6 @@
 	int ret = 0;
 
 	DRM_INFO("Master set.\n");
-	if (dev_priv->stealth) {
-		ret = vmw_request_device(dev_priv);
-		if (unlikely(ret != 0))
-			return ret;
-	}
 
 	if (active) {
 		BUG_ON(active != &dev_priv->fbdev_master);
@@ -649,18 +639,11 @@
 
 	ttm_lock_set_kill(&vmaster->lock, true, SIGTERM);
 
-	if (dev_priv->stealth) {
-		ret = ttm_bo_evict_mm(&dev_priv->bdev, TTM_PL_VRAM);
-		if (unlikely(ret != 0))
-			DRM_ERROR("Unable to clean VRAM on master drop.\n");
-		vmw_release_device(dev_priv);
-	}
 	dev_priv->active_master = &dev_priv->fbdev_master;
 	ttm_lock_set_kill(&dev_priv->fbdev_master.lock, false, SIGTERM);
 	ttm_vt_unlock(&dev_priv->fbdev_master.lock);
 
-	if (!dev_priv->stealth)
-		vmw_fb_on(dev_priv);
+	vmw_fb_on(dev_priv);
 }
 
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index d69caf9..0897359 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -182,25 +182,19 @@
 	return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.sid);
 }
 
-static int vmw_cmd_dma(struct vmw_private *dev_priv,
-		       struct vmw_sw_context *sw_context,
-		       SVGA3dCmdHeader *header)
+static int vmw_translate_guest_ptr(struct vmw_private *dev_priv,
+				   struct vmw_sw_context *sw_context,
+				   SVGAGuestPtr *ptr,
+				   struct vmw_dma_buffer **vmw_bo_p)
 {
-	uint32_t handle;
 	struct vmw_dma_buffer *vmw_bo = NULL;
 	struct ttm_buffer_object *bo;
-	struct vmw_surface *srf = NULL;
-	struct vmw_dma_cmd {
-		SVGA3dCmdHeader header;
-		SVGA3dCmdSurfaceDMA dma;
-	} *cmd;
+	uint32_t handle = ptr->gmrId;
 	struct vmw_relocation *reloc;
-	int ret;
 	uint32_t cur_validate_node;
 	struct ttm_validate_buffer *val_buf;
+	int ret;
 
-	cmd = container_of(header, struct vmw_dma_cmd, header);
-	handle = cmd->dma.guest.ptr.gmrId;
 	ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo);
 	if (unlikely(ret != 0)) {
 		DRM_ERROR("Could not find or use GMR region.\n");
@@ -209,14 +203,14 @@
 	bo = &vmw_bo->base;
 
 	if (unlikely(sw_context->cur_reloc >= VMWGFX_MAX_RELOCATIONS)) {
-		DRM_ERROR("Max number of DMA commands per submission"
+		DRM_ERROR("Max number relocations per submission"
 			  " exceeded\n");
 		ret = -EINVAL;
 		goto out_no_reloc;
 	}
 
 	reloc = &sw_context->relocs[sw_context->cur_reloc++];
-	reloc->location = &cmd->dma.guest.ptr;
+	reloc->location = ptr;
 
 	cur_validate_node = vmw_dmabuf_validate_node(bo, sw_context->cur_val_buf);
 	if (unlikely(cur_validate_node >= VMWGFX_MAX_GMRS)) {
@@ -234,7 +228,89 @@
 		list_add_tail(&val_buf->head, &sw_context->validate_nodes);
 		++sw_context->cur_val_buf;
 	}
+	*vmw_bo_p = vmw_bo;
+	return 0;
 
+out_no_reloc:
+	vmw_dmabuf_unreference(&vmw_bo);
+	vmw_bo_p = NULL;
+	return ret;
+}
+
+static int vmw_cmd_end_query(struct vmw_private *dev_priv,
+			     struct vmw_sw_context *sw_context,
+			     SVGA3dCmdHeader *header)
+{
+	struct vmw_dma_buffer *vmw_bo;
+	struct vmw_query_cmd {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdEndQuery q;
+	} *cmd;
+	int ret;
+
+	cmd = container_of(header, struct vmw_query_cmd, header);
+	ret = vmw_cmd_cid_check(dev_priv, sw_context, header);
+	if (unlikely(ret != 0))
+		return ret;
+
+	ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+				      &cmd->q.guestResult,
+				      &vmw_bo);
+	if (unlikely(ret != 0))
+		return ret;
+
+	vmw_dmabuf_unreference(&vmw_bo);
+	return 0;
+}
+
+static int vmw_cmd_wait_query(struct vmw_private *dev_priv,
+			      struct vmw_sw_context *sw_context,
+			      SVGA3dCmdHeader *header)
+{
+	struct vmw_dma_buffer *vmw_bo;
+	struct vmw_query_cmd {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdWaitForQuery q;
+	} *cmd;
+	int ret;
+
+	cmd = container_of(header, struct vmw_query_cmd, header);
+	ret = vmw_cmd_cid_check(dev_priv, sw_context, header);
+	if (unlikely(ret != 0))
+		return ret;
+
+	ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+				      &cmd->q.guestResult,
+				      &vmw_bo);
+	if (unlikely(ret != 0))
+		return ret;
+
+	vmw_dmabuf_unreference(&vmw_bo);
+	return 0;
+}
+
+
+static int vmw_cmd_dma(struct vmw_private *dev_priv,
+		       struct vmw_sw_context *sw_context,
+		       SVGA3dCmdHeader *header)
+{
+	struct vmw_dma_buffer *vmw_bo = NULL;
+	struct ttm_buffer_object *bo;
+	struct vmw_surface *srf = NULL;
+	struct vmw_dma_cmd {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdSurfaceDMA dma;
+	} *cmd;
+	int ret;
+
+	cmd = container_of(header, struct vmw_dma_cmd, header);
+	ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+				      &cmd->dma.guest.ptr,
+				      &vmw_bo);
+	if (unlikely(ret != 0))
+		return ret;
+
+	bo = &vmw_bo->base;
 	ret = vmw_user_surface_lookup_handle(dev_priv, sw_context->tfile,
 					     cmd->dma.host.sid, &srf);
 	if (ret) {
@@ -379,8 +455,8 @@
 	VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw),
 	VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check),
 	VMW_CMD_DEF(SVGA_3D_CMD_BEGIN_QUERY, &vmw_cmd_cid_check),
-	VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_cid_check),
-	VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_cid_check),
+	VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_end_query),
+	VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_wait_query),
 	VMW_CMD_DEF(SVGA_3D_CMD_PRESENT_READBACK, &vmw_cmd_ok),
 	VMW_CMD_DEF(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN,
 		    &vmw_cmd_blt_surf_screen_check)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index 4f4f643..a933670 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -559,6 +559,9 @@
 	info->pixmap.scan_align = 1;
 #endif
 
+	info->aperture_base = vmw_priv->vram_start;
+	info->aperture_size = vmw_priv->vram_size;
+
 	/*
 	 * Dirty & Deferred IO
 	 */
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index 24b56dc..2f6cf69 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -961,7 +961,7 @@
 		remaining -= 7;
 		pr_devel("client 0x%p called 'target'\n", priv);
 		/* if target is default */
-		if (!strncmp(kbuf, "default", 7))
+		if (!strncmp(curr_pos, "default", 7))
 			pdev = pci_dev_get(vga_default_device());
 		else {
 			if (!vga_pci_str_to_vars(curr_pos, remaining,
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 24d90ea..71d4c07 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -55,6 +55,12 @@
 menu "Special HID drivers"
 	depends on HID
 
+config HID_3M_PCT
+	tristate "3M PCT"
+	depends on USB_HID
+	---help---
+	Support for 3M PCT touch screens.
+
 config HID_A4TECH
 	tristate "A4 tech" if EMBEDDED
 	depends on USB_HID
@@ -183,6 +189,23 @@
 	  Say Y here if you want to enable force feedback support for Logitech
 	  Rumblepad 2 devices.
 
+config LOGIG940_FF
+	bool "Logitech Flight System G940 force feedback support"
+	depends on HID_LOGITECH
+	select INPUT_FF_MEMLESS
+	help
+	  Say Y here if you want to enable force feedback support for Logitech
+	  Flight System G940 devices.
+
+config HID_MAGICMOUSE
+	tristate "Apple MagicMouse multi-touch support"
+	depends on BT_HIDP
+	---help---
+	Support for the Apple Magic Mouse multi-touch.
+
+	Say Y here if you want support for the multi-touch features of the
+	Apple Wireless "Magic" Mouse.
+
 config HID_MICROSOFT
 	tristate "Microsoft" if EMBEDDED
 	depends on USB_HID
@@ -190,6 +213,12 @@
 	---help---
 	Support for Microsoft devices that are not fully compliant with HID standard.
 
+config HID_MOSART
+	tristate "MosArt"
+	depends on USB_HID
+	---help---
+	Support for MosArt dual-touch panels.
+
 config HID_MONTEREY
 	tristate "Monterey" if EMBEDDED
 	depends on USB_HID
@@ -198,11 +227,17 @@
 	Support for Monterey Genius KB29E.
 
 config HID_NTRIG
-	tristate "NTrig" if EMBEDDED
+	tristate "NTrig"
+	depends on USB_HID
+	---help---
+	Support for N-Trig touch screen.
+
+config HID_ORTEK
+	tristate "Ortek" if EMBEDDED
 	depends on USB_HID
 	default !EMBEDDED
 	---help---
-	Support for N-Trig touch screen.
+	Support for Ortek WKB-2000 wireless keyboard + mouse trackpad.
 
 config HID_PANTHERLORD
 	tristate "Pantherlord support" if EMBEDDED
@@ -227,6 +262,12 @@
 	---help---
 	Support for Petalynx Maxter remote control.
 
+config HID_QUANTA
+	tristate "Quanta Optical Touch"
+	depends on USB_HID
+	---help---
+	Support for Quanta Optical Touch dual-touch panels.
+
 config HID_SAMSUNG
 	tristate "Samsung" if EMBEDDED
 	depends on USB_HID
@@ -241,6 +282,12 @@
 	---help---
 	Support for Sony PS3 controller.
 
+config HID_STANTUM
+	tristate "Stantum"
+	depends on USB_HID
+	---help---
+	Support for Stantum multitouch panel.
+
 config HID_SUNPLUS
 	tristate "Sunplus" if EMBEDDED
 	depends on USB_HID
@@ -305,9 +352,8 @@
 	  Rumble Force or Force Feedback Wheel.
 
 config HID_WACOM
-	tristate "Wacom Bluetooth devices support" if EMBEDDED
+	tristate "Wacom Bluetooth devices support"
 	depends on BT_HIDP
-	default !EMBEDDED
 	---help---
 	Support for Wacom Graphire Bluetooth tablet.
 
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 0de2dff..0b2618f 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -18,7 +18,11 @@
 ifdef CONFIG_LOGIRUMBLEPAD2_FF
 	hid-logitech-objs	+= hid-lg2ff.o
 endif
+ifdef CONFIG_LOGIG940_FF
+	hid-logitech-objs	+= hid-lg3ff.o
+endif
 
+obj-$(CONFIG_HID_3M_PCT)	+= hid-3m-pct.o
 obj-$(CONFIG_HID_A4TECH)	+= hid-a4tech.o
 obj-$(CONFIG_HID_APPLE)		+= hid-apple.o
 obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
@@ -31,14 +35,19 @@
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
 obj-$(CONFIG_HID_KYE)		+= hid-kye.o
 obj-$(CONFIG_HID_LOGITECH)	+= hid-logitech.o
+obj-$(CONFIG_HID_MAGICMOUSE)    += hid-magicmouse.o
 obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o
+obj-$(CONFIG_HID_MOSART)	+= hid-mosart.o
 obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
+obj-$(CONFIG_HID_ORTEK)		+= hid-ortek.o
+obj-$(CONFIG_HID_QUANTA)	+= hid-quanta.o
 obj-$(CONFIG_HID_PANTHERLORD)	+= hid-pl.o
 obj-$(CONFIG_HID_PETALYNX)	+= hid-petalynx.o
 obj-$(CONFIG_HID_SAMSUNG)	+= hid-samsung.o
 obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
 obj-$(CONFIG_HID_SONY)		+= hid-sony.o
+obj-$(CONFIG_HID_STANTUM)	+= hid-stantum.o
 obj-$(CONFIG_HID_SUNPLUS)	+= hid-sunplus.o
 obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o
 obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c
new file mode 100644
index 0000000..2370aef
--- /dev/null
+++ b/drivers/hid/hid-3m-pct.c
@@ -0,0 +1,290 @@
+/*
+ *  HID driver for 3M PCT multitouch panels
+ *
+ *  Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("3M PCT multitouch panels");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct mmm_finger {
+	__s32 x, y;
+	__u8 rank;
+	bool touch, valid;
+};
+
+struct mmm_data {
+	struct mmm_finger f[10];
+	__u8 curid, num;
+	bool touch, valid;
+};
+
+static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_BUTTON:
+		return -1;
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_X,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_Y,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		/* we do not want to map these: no input-oriented meaning */
+		case 0x14:
+		case 0x23:
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+		case HID_DG_INRANGE:
+		case HID_DG_CONFIDENCE:
+			return -1;
+		case HID_DG_TIPSWITCH:
+			/* touchscreen emulation */
+			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			return 1;
+		case HID_DG_CONTACTID:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TRACKING_ID);
+			return 1;
+		}
+		/* let hid-input decide for the others */
+		return 0;
+
+	case 0xff000000:
+		/* we do not want to map these: no input-oriented meaning */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if (usage->type == EV_KEY || usage->type == EV_ABS)
+		clear_bit(usage->code, *bit);
+
+	return 0;
+}
+
+/*
+ * this function is called when a whole packet has been received and processed,
+ * so that it can decide what to send to the input layer.
+ */
+static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
+{
+	struct mmm_finger *oldest = 0;
+	bool pressed = false, released = false;
+	int i;
+
+	/*
+	 * we need to iterate on all fingers to decide if we have a press
+	 * or a release event in our touchscreen emulation.
+	 */
+	for (i = 0; i < 10; ++i) {
+		struct mmm_finger *f = &md->f[i];
+		if (!f->valid) {
+			/* this finger is just placeholder data, ignore */
+		} else if (f->touch) {
+			/* this finger is on the screen */
+			input_event(input, EV_ABS, ABS_MT_TRACKING_ID, i);
+			input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
+			input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
+			input_mt_sync(input);
+			/*
+			 * touchscreen emulation: maintain the age rank
+			 * of this finger, decide if we have a press
+			 */
+			if (f->rank == 0) {
+				f->rank = ++(md->num);
+				if (f->rank == 1)
+					pressed = true;
+			}
+			if (f->rank == 1)
+				oldest = f;
+		} else {
+			/* this finger took off the screen */
+			/* touchscreen emulation: maintain age rank of others */
+			int j;
+
+			for (j = 0; j < 10; ++j) {
+				struct mmm_finger *g = &md->f[j];
+				if (g->rank > f->rank) {
+					g->rank--;
+					if (g->rank == 1)
+						oldest = g;
+				}
+			}
+			f->rank = 0;
+			--(md->num);
+			if (md->num == 0)
+				released = true;
+		}
+		f->valid = 0;
+	}
+
+	/* touchscreen emulation */
+	if (oldest) {
+		if (pressed)
+			input_event(input, EV_KEY, BTN_TOUCH, 1);
+		input_event(input, EV_ABS, ABS_X, oldest->x);
+		input_event(input, EV_ABS, ABS_Y, oldest->y);
+	} else if (released) {
+		input_event(input, EV_KEY, BTN_TOUCH, 0);
+	}
+}
+
+/*
+ * this function is called upon all reports
+ * so that we can accumulate contact point information,
+ * and call input_mt_sync after each point.
+ */
+static int mmm_event(struct hid_device *hid, struct hid_field *field,
+				struct hid_usage *usage, __s32 value)
+{
+	struct mmm_data *md = hid_get_drvdata(hid);
+	/*
+	 * strangely, this function can be called before
+	 * field->hidinput is initialized!
+	 */
+	if (hid->claimed & HID_CLAIMED_INPUT) {
+		struct input_dev *input = field->hidinput->input;
+		switch (usage->hid) {
+		case HID_DG_TIPSWITCH:
+			md->touch = value;
+			break;
+		case HID_DG_CONFIDENCE:
+			md->valid = value;
+			break;
+		case HID_DG_CONTACTID:
+			if (md->valid) {
+				md->curid = value;
+				md->f[value].touch = md->touch;
+				md->f[value].valid = 1;
+			}
+			break;
+		case HID_GD_X:
+			if (md->valid)
+				md->f[md->curid].x = value;
+			break;
+		case HID_GD_Y:
+			if (md->valid)
+				md->f[md->curid].y = value;
+			break;
+		case HID_DG_CONTACTCOUNT:
+			mmm_filter_event(md, input);
+			break;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+	if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct mmm_data *md;
+
+	md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL);
+	if (!md) {
+		dev_err(&hdev->dev, "cannot allocate 3M data\n");
+		return -ENOMEM;
+	}
+	hid_set_drvdata(hdev, md);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree(md);
+	return ret;
+}
+
+static void mmm_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+	hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id mmm_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, mmm_devices);
+
+static const struct hid_usage_id mmm_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver mmm_driver = {
+	.name = "3m-pct",
+	.id_table = mmm_devices,
+	.probe = mmm_probe,
+	.remove = mmm_remove,
+	.input_mapping = mmm_input_mapping,
+	.input_mapped = mmm_input_mapped,
+	.usage_table = mmm_grabbed_usages,
+	.event = mmm_event,
+};
+
+static int __init mmm_init(void)
+{
+	return hid_register_driver(&mmm_driver);
+}
+
+static void __exit mmm_exit(void)
+{
+	hid_unregister_driver(&mmm_driver);
+}
+
+module_init(mmm_init);
+module_exit(mmm_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 5b4d66d..78286b1 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -40,6 +40,11 @@
 MODULE_PARM_DESC(fnmode, "Mode of fn key on Apple keyboards (0 = disabled, "
 		"[1] = fkeyslast, 2 = fkeysfirst)");
 
+static unsigned int iso_layout = 1;
+module_param(iso_layout, uint, 0644);
+MODULE_PARM_DESC(iso_layout, "Enable/Disable hardcoded ISO-layout of the keyboard. "
+		"(0 = disabled, [1] = enabled)");
+
 struct apple_sc {
 	unsigned long quirks;
 	unsigned int fn_on;
@@ -199,11 +204,13 @@
 		}
 	}
 
-	if (asc->quirks & APPLE_ISO_KEYBOARD) {
-		trans = apple_find_translation(apple_iso_keyboard, usage->code);
-		if (trans) {
-			input_event(input, usage->type, trans->to, value);
-			return 1;
+        if (iso_layout) {
+		if (asc->quirks & APPLE_ISO_KEYBOARD) {
+			trans = apple_find_translation(apple_iso_keyboard, usage->code);
+			if (trans) {
+				input_event(input, usage->type, trans->to, value);
+				return 1;
+			}
 		}
 	}
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index eabe5f8..368fbb0 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -4,7 +4,7 @@
  *  Copyright (c) 1999 Andreas Gal
  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2006-2010 Jiri Kosina
  */
 
 /*
@@ -51,7 +51,7 @@
  * Register a new report for a device.
  */
 
-static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
 {
 	struct hid_report_enum *report_enum = device->report_enum + type;
 	struct hid_report *report;
@@ -75,6 +75,7 @@
 
 	return report;
 }
+EXPORT_SYMBOL_GPL(hid_register_report);
 
 /*
  * Register a new field for this report.
@@ -387,7 +388,8 @@
 	__u32 data;
 	unsigned n;
 
-	if (item->size == 0) {
+	/* Local delimiter could have value 0, which allows size to be 0 */
+	if (item->size == 0 && item->tag != HID_LOCAL_ITEM_TAG_DELIMITER) {
 		dbg_hid("item data expected for local item\n");
 		return -1;
 	}
@@ -1248,11 +1250,13 @@
 
 /* a list of devices for which there is a specialized driver on HID bus */
 static const struct hid_device_id hid_blacklist[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) },
@@ -1324,6 +1328,7 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
@@ -1337,10 +1342,15 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
@@ -1543,8 +1553,9 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT)},
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
@@ -1661,8 +1672,6 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 6abd036..cd4ece6 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -864,13 +864,13 @@
 	[EV_SND] = sounds,			[EV_REP] = repeats,
 };
 
-void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f) {
-
+static void hid_resolv_event(__u8 type, __u16 code, struct seq_file *f)
+{
 	seq_printf(f, "%s.%s", events[type] ? events[type] : "?",
 		names[type] ? (names[type][code] ? names[type][code] : "?") : "?");
 }
 
-void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
+static void hid_dump_input_mapping(struct hid_device *hid, struct seq_file *f)
 {
 	int i, j, k;
 	struct hid_report *report;
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 010368e..72c05f9 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -18,6 +18,9 @@
 #ifndef HID_IDS_H_FILE
 #define HID_IDS_H_FILE
 
+#define USB_VENDOR_ID_3M		0x0596
+#define USB_DEVICE_ID_3M1968		0x0500
+
 #define USB_VENDOR_ID_A4TECH		0x09da
 #define USB_DEVICE_ID_A4TECH_WCP32PU	0x0006
 #define USB_DEVICE_ID_A4TECH_X5_005D	0x000a
@@ -56,6 +59,7 @@
 
 #define USB_VENDOR_ID_APPLE		0x05ac
 #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE	0x0304
+#define USB_DEVICE_ID_APPLE_MAGICMOUSE	0x030d
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI	0x020e
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO	0x020f
 #define USB_DEVICE_ID_APPLE_GEYSER_ANSI	0x0214
@@ -96,9 +100,12 @@
 #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL	0x8241
 #define USB_DEVICE_ID_APPLE_IRCONTROL4	0x8242
 
-#define USB_VENDOR_ID_ASUS		0x0b05
-#define USB_DEVICE_ID_ASUS_LCM		0x1726
-#define USB_DEVICE_ID_ASUS_LCM2		0x175b
+#define USB_VENDOR_ID_ASUS		0x0486
+#define USB_DEVICE_ID_ASUS_T91MT	0x0185
+
+#define USB_VENDOR_ID_ASUSTEK		0x0b05
+#define USB_DEVICE_ID_ASUSTEK_LCM	0x1726
+#define USB_DEVICE_ID_ASUSTEK_LCM2	0x175b
 
 #define USB_VENDOR_ID_ATEN		0x0557
 #define USB_DEVICE_ID_ATEN_UC100KM	0x2004
@@ -169,6 +176,9 @@
 #define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
 #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
 
+#define USB_VENDOR_ID_ETURBOTOUCH	0x22b9
+#define USB_DEVICE_ID_ETURBOTOUCH	0x0006
+
 #define USB_VENDOR_ID_ETT		0x0664
 #define USB_DEVICE_ID_TC5UH		0x0309
 
@@ -303,6 +313,7 @@
 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2	0xc219
 #define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D	0xc283
 #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO	0xc286
+#define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940	0xc287
 #define USB_DEVICE_ID_LOGITECH_WHEEL	0xc294
 #define USB_DEVICE_ID_LOGITECH_WINGMAN_FFG	0xc293
 #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL	0xc295
@@ -365,6 +376,9 @@
 #define USB_VENDOR_ID_ONTRAK		0x0a07
 #define USB_DEVICE_ID_ONTRAK_ADU100	0x0064
 
+#define USB_VENDOR_ID_ORTEK		0x05a4
+#define USB_DEVICE_ID_ORTEK_WKB2000	0x2000
+
 #define USB_VENDOR_ID_PANJIT		0x134c
 
 #define USB_VENDOR_ID_PANTHERLORD	0x0810
@@ -382,9 +396,16 @@
 #define USB_VENDOR_ID_POWERCOM		0x0d9f
 #define USB_DEVICE_ID_POWERCOM_UPS	0x0002
 
+#define USB_VENDOR_ID_PRODIGE		0x05af
+#define USB_DEVICE_ID_PRODIGE_CORDLESS	0x3062
+
 #define USB_VENDOR_ID_SAITEK		0x06a3
 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD	0xff17
 
+#define USB_VENDOR_ID_QUANTA		0x0408
+#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH	0x3000
+#define USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN	0x3001
+
 #define USB_VENDOR_ID_SAMSUNG		0x0419
 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE	0x0001
 
@@ -396,18 +417,20 @@
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST	0x0034
 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LAST	0x0046
 
+#define USB_VENDOR_ID_STANTUM		0x1f87
+#define USB_DEVICE_ID_MTP		0x0002
+
 #define USB_VENDOR_ID_SUN		0x0430
 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE	0xcdab
 
 #define USB_VENDOR_ID_SUNPLUS		0x04fc
 #define USB_DEVICE_ID_SUNPLUS_WDESKTOP	0x05d8
 
-#define USB_VENDOR_ID_TENX		0x1130
-#define USB_DEVICE_ID_TENX_IBUDDY1	0x0001
-#define USB_DEVICE_ID_TENX_IBUDDY2	0x0002
-
 #define USB_VENDOR_ID_THRUSTMASTER	0x044f
 
+#define USB_VENDOR_ID_TOUCHPACK		0x1bfd
+#define USB_DEVICE_ID_TOUCHPACK_RTS	0x1688
+
 #define USB_VENDOR_ID_TOPMAX		0x0663
 #define USB_DEVICE_ID_TOPMAX_COBRAPAD	0x0103
 
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 5862b0f..79d9edd 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1,6 +1,6 @@
 /*
  *  Copyright (c) 2000-2001 Vojtech Pavlik
- *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2006-2010 Jiri Kosina
  *
  *  HID to Linux Input mapping
  */
@@ -193,12 +193,17 @@
 		break;
 
 	case HID_UP_BUTTON:
-		code = ((usage->hid - 1) & 0xf);
+		code = ((usage->hid - 1) & HID_USAGE);
 
 		switch (field->application) {
 		case HID_GD_MOUSE:
 		case HID_GD_POINTER:  code += 0x110; break;
-		case HID_GD_JOYSTICK: code += 0x120; break;
+		case HID_GD_JOYSTICK:
+				      if (code <= 0xf)
+					      code += BTN_JOYSTICK;
+				      else
+					      code += BTN_TRIGGER_HAPPY;
+				      break;
 		case HID_GD_GAMEPAD:  code += 0x130; break;
 		default:
 			switch (field->physical) {
@@ -400,6 +405,7 @@
 		case 0x192: map_key_clear(KEY_CALC);		break;
 		case 0x194: map_key_clear(KEY_FILE);		break;
 		case 0x196: map_key_clear(KEY_WWW);		break;
+		case 0x199: map_key_clear(KEY_CHAT);		break;
 		case 0x19c: map_key_clear(KEY_LOGOFF);		break;
 		case 0x19e: map_key_clear(KEY_COFFEE);		break;
 		case 0x1a6: map_key_clear(KEY_HELP);		break;
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index 9fcd3d0..3677c90 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -34,6 +34,7 @@
 #define LG_FF			0x200
 #define LG_FF2			0x400
 #define LG_RDESC_REL_ABS	0x800
+#define LG_FF3			0x1000
 
 /*
  * Certain Logitech keyboards send in report #3 keys which are far
@@ -266,7 +267,7 @@
 		goto err_free;
 	}
 
-	if (quirks & (LG_FF | LG_FF2))
+	if (quirks & (LG_FF | LG_FF2 | LG_FF3))
 		connect_mask &= ~HID_CONNECT_FF;
 
 	ret = hid_hw_start(hdev, connect_mask);
@@ -279,6 +280,8 @@
 		lgff_init(hdev);
 	if (quirks & LG_FF2)
 		lg2ff_init(hdev);
+	if (quirks & LG_FF3)
+		lg3ff_init(hdev);
 
 	return 0;
 err_free:
@@ -331,6 +334,8 @@
 		.driver_data = LG_FF },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
 		.driver_data = LG_FF2 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940),
+		.driver_data = LG_FF3 },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR),
 		.driver_data = LG_RDESC_REL_ABS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER),
diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h
index bf31592..ce2ac86 100644
--- a/drivers/hid/hid-lg.h
+++ b/drivers/hid/hid-lg.h
@@ -13,4 +13,10 @@
 static inline int lg2ff_init(struct hid_device *hdev) { return -1; }
 #endif
 
+#ifdef CONFIG_LOGIG940_FF
+int lg3ff_init(struct hid_device *hdev);
+#else
+static inline int lg3ff_init(struct hid_device *hdev) { return -1; }
+#endif
+
 #endif
diff --git a/drivers/hid/hid-lg3ff.c b/drivers/hid/hid-lg3ff.c
new file mode 100644
index 0000000..4002832
--- /dev/null
+++ b/drivers/hid/hid-lg3ff.c
@@ -0,0 +1,176 @@
+/*
+ *  Force feedback support for Logitech Flight System G940
+ *
+ *  Copyright (c) 2009 Gary Stein <LordCnidarian@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+
+#include "usbhid/usbhid.h"
+#include "hid-lg.h"
+
+/*
+ * G940 Theory of Operation (from experimentation)
+ *
+ * There are 63 fields (only 3 of them currently used)
+ * 0 - seems to be command field
+ * 1 - 30 deal with the x axis
+ * 31 -60 deal with the y axis
+ *
+ * Field 1 is x axis constant force
+ * Field 31 is y axis constant force
+ *
+ * other interesting fields 1,2,3,4 on x axis
+ * (same for 31,32,33,34 on y axis)
+ *
+ * 0 0 127 127 makes the joystick autocenter hard
+ *
+ * 127 0 127 127 makes the joystick loose on the right,
+ * but stops all movemnt left
+ *
+ * -127 0 -127 -127 makes the joystick loose on the left,
+ * but stops all movement right
+ *
+ * 0 0 -127 -127 makes the joystick rattle very hard
+ *
+ * I'm sure these are effects that I don't know enough about them
+ */
+
+struct lg3ff_device {
+	struct hid_report *report;
+};
+
+static int hid_lg3ff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+	int x, y;
+
+/*
+ * Maxusage should always be 63 (maximum fields)
+ * likely a better way to ensure this data is clean
+ */
+	memset(report->field[0]->value, 0, sizeof(__s32)*report->field[0]->maxusage);
+
+	switch (effect->type) {
+	case FF_CONSTANT:
+/*
+ * Already clamped in ff_memless
+ * 0 is center (different then other logitech)
+ */
+		x = effect->u.ramp.start_level;
+		y = effect->u.ramp.end_level;
+
+		/* send command byte */
+		report->field[0]->value[0] = 0x51;
+
+/*
+ * Sign backwards from other Force3d pro
+ * which get recast here in two's complement 8 bits
+ */
+		report->field[0]->value[1] = (unsigned char)(-x);
+		report->field[0]->value[31] = (unsigned char)(-y);
+
+		usbhid_submit_report(hid, report, USB_DIR_OUT);
+		break;
+	}
+	return 0;
+}
+static void hid_lg3ff_set_autocenter(struct input_dev *dev, u16 magnitude)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+
+/*
+ * Auto Centering probed from device
+ * NOTE: deadman's switch on G940 must be covered
+ * for effects to work
+ */
+	report->field[0]->value[0] = 0x51;
+	report->field[0]->value[1] = 0x00;
+	report->field[0]->value[2] = 0x00;
+	report->field[0]->value[3] = 0x7F;
+	report->field[0]->value[4] = 0x7F;
+	report->field[0]->value[31] = 0x00;
+	report->field[0]->value[32] = 0x00;
+	report->field[0]->value[33] = 0x7F;
+	report->field[0]->value[34] = 0x7F;
+
+	usbhid_submit_report(hid, report, USB_DIR_OUT);
+}
+
+
+static const signed short ff3_joystick_ac[] = {
+	FF_CONSTANT,
+	FF_AUTOCENTER,
+	-1
+};
+
+int lg3ff_init(struct hid_device *hid)
+{
+	struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct input_dev *dev = hidinput->input;
+	struct hid_report *report;
+	struct hid_field *field;
+	const signed short *ff_bits = ff3_joystick_ac;
+	int error;
+	int i;
+
+	/* Find the report to use */
+	if (list_empty(report_list)) {
+		err_hid("No output report found");
+		return -1;
+	}
+
+	/* Check that the report looks ok */
+	report = list_entry(report_list->next, struct hid_report, list);
+	if (!report) {
+		err_hid("NULL output report");
+		return -1;
+	}
+
+	field = report->field[0];
+	if (!field) {
+		err_hid("NULL field");
+		return -1;
+	}
+
+	/* Assume single fixed device G940 */
+	for (i = 0; ff_bits[i] >= 0; i++)
+		set_bit(ff_bits[i], dev->ffbit);
+
+	error = input_ff_create_memless(dev, NULL, hid_lg3ff_play);
+	if (error)
+		return error;
+
+	if (test_bit(FF_AUTOCENTER, dev->ffbit))
+		dev->ff->set_autocenter = hid_lg3ff_set_autocenter;
+
+	dev_info(&hid->dev, "Force feedback for Logitech Flight System G940 by "
+			"Gary Stein <LordCnidarian@gmail.com>\n");
+	return 0;
+}
+
diff --git a/drivers/hid/hid-lgff.c b/drivers/hid/hid-lgff.c
index 987abeb..61142b7 100644
--- a/drivers/hid/hid-lgff.c
+++ b/drivers/hid/hid-lgff.c
@@ -67,6 +67,7 @@
 	{ 0x046d, 0xc219, ff_rumble },
 	{ 0x046d, 0xc283, ff_joystick },
 	{ 0x046d, 0xc286, ff_joystick_ac },
+	{ 0x046d, 0xc287, ff_joystick_ac },
 	{ 0x046d, 0xc293, ff_joystick },
 	{ 0x046d, 0xc294, ff_wheel },
 	{ 0x046d, 0xc295, ff_joystick },
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
new file mode 100644
index 0000000..4a3a94f
--- /dev/null
+++ b/drivers/hid/hid-magicmouse.c
@@ -0,0 +1,449 @@
+/*
+ *   Apple "Magic" Wireless Mouse driver
+ *
+ *   Copyright (c) 2010 Michael Poole <mdpoole@troilus.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "hid-ids.h"
+
+static bool emulate_3button = true;
+module_param(emulate_3button, bool, 0644);
+MODULE_PARM_DESC(emulate_3button, "Emulate a middle button");
+
+static int middle_button_start = -350;
+static int middle_button_stop = +350;
+
+static bool emulate_scroll_wheel = true;
+module_param(emulate_scroll_wheel, bool, 0644);
+MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel");
+
+static bool report_touches = true;
+module_param(report_touches, bool, 0644);
+MODULE_PARM_DESC(report_touches, "Emit touch records (otherwise, only use them for emulation)");
+
+static bool report_undeciphered;
+module_param(report_undeciphered, bool, 0644);
+MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event");
+
+#define TOUCH_REPORT_ID   0x29
+/* These definitions are not precise, but they're close enough.  (Bits
+ * 0x03 seem to indicate the aspect ratio of the touch, bits 0x70 seem
+ * to be some kind of bit mask -- 0x20 may be a near-field reading,
+ * and 0x40 is actual contact, and 0x10 may be a start/stop or change
+ * indication.)
+ */
+#define TOUCH_STATE_MASK  0xf0
+#define TOUCH_STATE_NONE  0x00
+#define TOUCH_STATE_START 0x30
+#define TOUCH_STATE_DRAG  0x40
+
+/**
+ * struct magicmouse_sc - Tracks Magic Mouse-specific data.
+ * @input: Input device through which we report events.
+ * @quirks: Currently unused.
+ * @last_timestamp: Timestamp from most recent (18-bit) touch report
+ *     (units of milliseconds over short windows, but seems to
+ *     increase faster when there are no touches).
+ * @delta_time: 18-bit difference between the two most recent touch
+ *     reports from the mouse.
+ * @ntouches: Number of touches in most recent touch report.
+ * @scroll_accel: Number of consecutive scroll motions.
+ * @scroll_jiffies: Time of last scroll motion.
+ * @touches: Most recent data for a touch, indexed by tracking ID.
+ * @tracking_ids: Mapping of current touch input data to @touches.
+ */
+struct magicmouse_sc {
+	struct input_dev *input;
+	unsigned long quirks;
+
+	int last_timestamp;
+	int delta_time;
+	int ntouches;
+	int scroll_accel;
+	unsigned long scroll_jiffies;
+
+	struct {
+		short x;
+		short y;
+		short scroll_y;
+		u8 size;
+	} touches[16];
+	int tracking_ids[16];
+};
+
+static int magicmouse_firm_touch(struct magicmouse_sc *msc)
+{
+	int touch = -1;
+	int ii;
+
+	/* If there is only one "firm" touch, set touch to its
+	 * tracking ID.
+	 */
+	for (ii = 0; ii < msc->ntouches; ii++) {
+		int idx = msc->tracking_ids[ii];
+		if (msc->touches[idx].size < 8) {
+			/* Ignore this touch. */
+		} else if (touch >= 0) {
+			touch = -1;
+			break;
+		} else {
+			touch = idx;
+		}
+	}
+
+	return touch;
+}
+
+static void magicmouse_emit_buttons(struct magicmouse_sc *msc, int state)
+{
+	int last_state = test_bit(BTN_LEFT, msc->input->key) << 0 |
+		test_bit(BTN_RIGHT, msc->input->key) << 1 |
+		test_bit(BTN_MIDDLE, msc->input->key) << 2;
+
+	if (emulate_3button) {
+		int id;
+
+		/* If some button was pressed before, keep it held
+		 * down.  Otherwise, if there's exactly one firm
+		 * touch, use that to override the mouse's guess.
+		 */
+		if (state == 0) {
+			/* The button was released. */
+		} else if (last_state != 0) {
+			state = last_state;
+		} else if ((id = magicmouse_firm_touch(msc)) >= 0) {
+			int x = msc->touches[id].x;
+			if (x < middle_button_start)
+				state = 1;
+			else if (x > middle_button_stop)
+				state = 2;
+			else
+				state = 4;
+		} /* else: we keep the mouse's guess */
+
+		input_report_key(msc->input, BTN_MIDDLE, state & 4);
+	}
+
+	input_report_key(msc->input, BTN_LEFT, state & 1);
+	input_report_key(msc->input, BTN_RIGHT, state & 2);
+
+	if (state != last_state)
+		msc->scroll_accel = 0;
+}
+
+static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tdata)
+{
+	struct input_dev *input = msc->input;
+	__s32 x_y = tdata[0] << 8 | tdata[1] << 16 | tdata[2] << 24;
+	int misc = tdata[5] | tdata[6] << 8;
+	int id = (misc >> 6) & 15;
+	int x = x_y << 12 >> 20;
+	int y = -(x_y >> 20);
+
+	/* Store tracking ID and other fields. */
+	msc->tracking_ids[raw_id] = id;
+	msc->touches[id].x = x;
+	msc->touches[id].y = y;
+	msc->touches[id].size = misc & 63;
+
+	/* If requested, emulate a scroll wheel by detecting small
+	 * vertical touch motions along the middle of the mouse.
+	 */
+	if (emulate_scroll_wheel &&
+	    middle_button_start < x && x < middle_button_stop) {
+		static const int accel_profile[] = {
+			256, 228, 192, 160, 128, 96, 64, 32,
+		};
+		unsigned long now = jiffies;
+		int step = msc->touches[id].scroll_y - y;
+
+		/* Reset acceleration after half a second. */
+		if (time_after(now, msc->scroll_jiffies + HZ / 2))
+			msc->scroll_accel = 0;
+
+		/* Calculate and apply the scroll motion. */
+		switch (tdata[7] & TOUCH_STATE_MASK) {
+		case TOUCH_STATE_START:
+			msc->touches[id].scroll_y = y;
+			msc->scroll_accel = min_t(int, msc->scroll_accel + 1,
+						ARRAY_SIZE(accel_profile) - 1);
+			break;
+		case TOUCH_STATE_DRAG:
+			step = step / accel_profile[msc->scroll_accel];
+			if (step != 0) {
+				msc->touches[id].scroll_y = y;
+				msc->scroll_jiffies = now;
+				input_report_rel(input, REL_WHEEL, step);
+			}
+			break;
+		}
+	}
+
+	/* Generate the input events for this touch. */
+	if (report_touches) {
+		int orientation = (misc >> 10) - 32;
+
+		input_report_abs(input, ABS_MT_TRACKING_ID, id);
+		input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]);
+		input_report_abs(input, ABS_MT_TOUCH_MINOR, tdata[4]);
+		input_report_abs(input, ABS_MT_ORIENTATION, orientation);
+		input_report_abs(input, ABS_MT_POSITION_X, x);
+		input_report_abs(input, ABS_MT_POSITION_Y, y);
+
+		if (report_undeciphered)
+			input_event(input, EV_MSC, MSC_RAW, tdata[7]);
+
+		input_mt_sync(input);
+	}
+}
+
+static int magicmouse_raw_event(struct hid_device *hdev,
+		struct hid_report *report, u8 *data, int size)
+{
+	struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+	struct input_dev *input = msc->input;
+	int x, y, ts, ii, clicks;
+
+	switch (data[0]) {
+	case 0x10:
+		if (size != 6)
+			return 0;
+		x = (__s16)(data[2] | data[3] << 8);
+		y = (__s16)(data[4] | data[5] << 8);
+		clicks = data[1];
+		break;
+	case TOUCH_REPORT_ID:
+		/* Expect six bytes of prefix, and N*8 bytes of touch data. */
+		if (size < 6 || ((size - 6) % 8) != 0)
+			return 0;
+		ts = data[3] >> 6 | data[4] << 2 | data[5] << 10;
+		msc->delta_time = (ts - msc->last_timestamp) & 0x3ffff;
+		msc->last_timestamp = ts;
+		msc->ntouches = (size - 6) / 8;
+		for (ii = 0; ii < msc->ntouches; ii++)
+			magicmouse_emit_touch(msc, ii, data + ii * 8 + 6);
+		/* When emulating three-button mode, it is important
+		 * to have the current touch information before
+		 * generating a click event.
+		 */
+		x = (signed char)data[1];
+		y = (signed char)data[2];
+		clicks = data[3];
+		break;
+	case 0x20: /* Theoretically battery status (0-100), but I have
+		    * never seen it -- maybe it is only upon request.
+		    */
+	case 0x60: /* Unknown, maybe laser on/off. */
+	case 0x61: /* Laser reflection status change.
+		    * data[1]: 0 = spotted, 1 = lost
+		    */
+	default:
+		return 0;
+	}
+
+	magicmouse_emit_buttons(msc, clicks & 3);
+	input_report_rel(input, REL_X, x);
+	input_report_rel(input, REL_Y, y);
+	input_sync(input);
+	return 1;
+}
+
+static int magicmouse_input_open(struct input_dev *dev)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+
+	return hid->ll_driver->open(hid);
+}
+
+static void magicmouse_input_close(struct input_dev *dev)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+
+	hid->ll_driver->close(hid);
+}
+
+static void magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev)
+{
+	input_set_drvdata(input, hdev);
+	input->event = hdev->ll_driver->hidinput_input_event;
+	input->open = magicmouse_input_open;
+	input->close = magicmouse_input_close;
+
+	input->name = hdev->name;
+	input->phys = hdev->phys;
+	input->uniq = hdev->uniq;
+	input->id.bustype = hdev->bus;
+	input->id.vendor = hdev->vendor;
+	input->id.product = hdev->product;
+	input->id.version = hdev->version;
+	input->dev.parent = hdev->dev.parent;
+
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+	__set_bit(BTN_RIGHT, input->keybit);
+	if (emulate_3button)
+		__set_bit(BTN_MIDDLE, input->keybit);
+	__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+	__set_bit(EV_REL, input->evbit);
+	__set_bit(REL_X, input->relbit);
+	__set_bit(REL_Y, input->relbit);
+	if (emulate_scroll_wheel)
+		__set_bit(REL_WHEEL, input->relbit);
+
+	if (report_touches) {
+		__set_bit(EV_ABS, input->evbit);
+
+		input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+		input_set_abs_params(input, ABS_MT_ORIENTATION, -32, 31, 1, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_X, -1100, 1358,
+				4, 0);
+		/* Note: Touch Y position from the device is inverted relative
+		 * to how pointer motion is reported (and relative to how USB
+		 * HID recommends the coordinates work).  This driver keeps
+		 * the origin at the same position, and just uses the additive
+		 * inverse of the reported Y.
+		 */
+		input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, 2047,
+				4, 0);
+	}
+
+	if (report_undeciphered) {
+		__set_bit(EV_MSC, input->evbit);
+		__set_bit(MSC_RAW, input->mscbit);
+	}
+}
+
+static int magicmouse_probe(struct hid_device *hdev,
+	const struct hid_device_id *id)
+{
+	__u8 feature_1[] = { 0xd7, 0x01 };
+	__u8 feature_2[] = { 0xf8, 0x01, 0x32 };
+	struct input_dev *input;
+	struct magicmouse_sc *msc;
+	struct hid_report *report;
+	int ret;
+
+	msc = kzalloc(sizeof(*msc), GFP_KERNEL);
+	if (msc == NULL) {
+		dev_err(&hdev->dev, "can't alloc magicmouse descriptor\n");
+		return -ENOMEM;
+	}
+
+	msc->quirks = id->driver_data;
+	hid_set_drvdata(hdev, msc);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "magicmouse hid parse failed\n");
+		goto err_free;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		dev_err(&hdev->dev, "magicmouse hw start failed\n");
+		goto err_free;
+	}
+
+	report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID);
+	if (!report) {
+		dev_err(&hdev->dev, "unable to register touch report\n");
+		ret = -ENOMEM;
+		goto err_stop_hw;
+	}
+	report->size = 6;
+
+	ret = hdev->hid_output_raw_report(hdev, feature_1, sizeof(feature_1),
+			HID_FEATURE_REPORT);
+	if (ret != sizeof(feature_1)) {
+		dev_err(&hdev->dev, "unable to request touch data (1:%d)\n",
+				ret);
+		goto err_stop_hw;
+	}
+	ret = hdev->hid_output_raw_report(hdev, feature_2,
+			sizeof(feature_2), HID_FEATURE_REPORT);
+	if (ret != sizeof(feature_2)) {
+		dev_err(&hdev->dev, "unable to request touch data (2:%d)\n",
+				ret);
+		goto err_stop_hw;
+	}
+
+	input = input_allocate_device();
+	if (!input) {
+		dev_err(&hdev->dev, "can't alloc input device\n");
+		ret = -ENOMEM;
+		goto err_stop_hw;
+	}
+	magicmouse_setup_input(input, hdev);
+
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(&hdev->dev, "input device registration failed\n");
+		goto err_input;
+	}
+	msc->input = input;
+
+	return 0;
+err_input:
+	input_free_device(input);
+err_stop_hw:
+	hid_hw_stop(hdev);
+err_free:
+	kfree(msc);
+	return ret;
+}
+
+static void magicmouse_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
+static const struct hid_device_id magic_mice[] = {
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE),
+		.driver_data = 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, magic_mice);
+
+static struct hid_driver magicmouse_driver = {
+	.name = "magicmouse",
+	.id_table = magic_mice,
+	.probe = magicmouse_probe,
+	.remove = magicmouse_remove,
+	.raw_event = magicmouse_raw_event,
+};
+
+static int __init magicmouse_init(void)
+{
+	int ret;
+
+	ret = hid_register_driver(&magicmouse_driver);
+	if (ret)
+		printk(KERN_ERR "can't register magicmouse driver\n");
+
+	return ret;
+}
+
+static void __exit magicmouse_exit(void)
+{
+	hid_unregister_driver(&magicmouse_driver);
+}
+
+module_init(magicmouse_init);
+module_exit(magicmouse_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-mosart.c b/drivers/hid/hid-mosart.c
new file mode 100644
index 0000000..c871816
--- /dev/null
+++ b/drivers/hid/hid-mosart.c
@@ -0,0 +1,273 @@
+/*
+ *  HID driver for the multitouch panel on the ASUS EeePC T91MT
+ *
+ *  Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
+ *  Copyright (c) 2010 Teemu Tuominen <teemu.tuominen@cybercom.com>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("MosArt dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct mosart_data {
+	__u16 x, y;
+	__u8 id;
+	bool valid;		/* valid finger data, or just placeholder? */
+	bool first;		/* is this the first finger in this frame? */
+	bool activity_now;	/* at least one active finger in this frame? */
+	bool activity;		/* at least one active finger previously? */
+};
+
+static int mosart_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_X,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_Y,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		case HID_DG_CONFIDENCE:
+		case HID_DG_TIPSWITCH:
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+		case HID_DG_TIPPRESSURE:
+		case HID_DG_WIDTH:
+		case HID_DG_HEIGHT:
+			return -1;
+		case HID_DG_INRANGE:
+			/* touchscreen emulation */
+			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			return 1;
+
+		case HID_DG_CONTACTID:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TRACKING_ID);
+			return 1;
+
+		}
+		return 0;
+
+	case 0xff000000:
+		/* ignore HID features */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int mosart_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if (usage->type == EV_KEY || usage->type == EV_ABS)
+		clear_bit(usage->code, *bit);
+
+	return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void mosart_filter_event(struct mosart_data *td, struct input_dev *input)
+{
+	td->first = !td->first; /* touchscreen emulation */
+
+	if (!td->valid) {
+		/*
+		 * touchscreen emulation: if no finger in this frame is valid
+		 * and there previously was finger activity, this is a release
+		 */ 
+		if (!td->first && !td->activity_now && td->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 0);
+			td->activity = false;
+		}
+		return;
+	}
+
+	input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+	input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+	input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+
+	input_mt_sync(input);
+	td->valid = false;
+
+	/* touchscreen emulation: if first active finger in this frame... */
+	if (!td->activity_now) {
+		/* if there was no previous activity, emit touch event */
+		if (!td->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 1);
+			td->activity = true;
+		}
+		td->activity_now = true;
+		/* and in any case this is our preferred finger */
+		input_event(input, EV_ABS, ABS_X, td->x);
+		input_event(input, EV_ABS, ABS_Y, td->y);
+	}
+}
+
+
+static int mosart_event(struct hid_device *hid, struct hid_field *field,
+				struct hid_usage *usage, __s32 value)
+{
+	struct mosart_data *td = hid_get_drvdata(hid);
+
+	if (hid->claimed & HID_CLAIMED_INPUT) {
+		struct input_dev *input = field->hidinput->input;
+		switch (usage->hid) {
+		case HID_DG_INRANGE:
+			td->valid = !!value;
+			break;
+		case HID_GD_X:
+			td->x = value;
+			break;
+		case HID_GD_Y:
+			td->y = value;
+			mosart_filter_event(td, input);
+			break;
+		case HID_DG_CONTACTID:
+			td->id = value;
+			break;
+		case HID_DG_CONTACTCOUNT:
+			/* touch emulation: this is the last field in a frame */
+			td->first = false;
+			td->activity_now = false;
+			break;
+		case HID_DG_CONFIDENCE:
+		case HID_DG_TIPSWITCH:
+			/* avoid interference from generic hidinput handling */
+			break;
+
+		default:
+			/* fallback to the generic hidinput handling */
+			return 0;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+	if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int mosart_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct mosart_data *td;
+
+
+	td = kmalloc(sizeof(struct mosart_data), GFP_KERNEL);
+	if (!td) {
+		dev_err(&hdev->dev, "cannot allocate MosArt data\n");
+		return -ENOMEM;
+	}
+	td->valid = false;
+	td->activity = false;
+	td->activity_now = false;
+	td->first = false;
+	hid_set_drvdata(hdev, td);
+
+	/* currently, it's better to have one evdev device only */
+#if 0
+	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
+#endif
+
+	ret = hid_parse(hdev);
+	if (ret == 0)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret == 0) {
+		struct hid_report_enum *re = hdev->report_enum
+						+ HID_FEATURE_REPORT;
+		struct hid_report *r = re->report_id_hash[7];
+
+		r->field[0]->value[0] = 0x02;
+		usbhid_submit_report(hdev, r, USB_DIR_OUT);
+	} else 
+		kfree(td);
+
+	return ret;
+}
+
+static void mosart_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+	hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id mosart_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, mosart_devices);
+
+static const struct hid_usage_id mosart_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver mosart_driver = {
+	.name = "mosart",
+	.id_table = mosart_devices,
+	.probe = mosart_probe,
+	.remove = mosart_remove,
+	.input_mapping = mosart_input_mapping,
+	.input_mapped = mosart_input_mapped,
+	.usage_table = mosart_grabbed_usages,
+	.event = mosart_event,
+};
+
+static int __init mosart_init(void)
+{
+	return hid_register_driver(&mosart_driver);
+}
+
+static void __exit mosart_exit(void)
+{
+	hid_unregister_driver(&mosart_driver);
+}
+
+module_init(mosart_init);
+module_exit(mosart_exit);
+
diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
index 49ce69d..3234c72 100644
--- a/drivers/hid/hid-ntrig.c
+++ b/drivers/hid/hid-ntrig.c
@@ -25,11 +25,16 @@
 					EV_KEY, (c))
 
 struct ntrig_data {
-	__s32 x, y, id, w, h;
-	char reading_a_point, found_contact_id;
-	char pen_active;
-	char finger_active;
-	char inverted;
+	/* Incoming raw values for a single contact */
+	__u16 x, y, w, h;
+	__u16 id;
+	__u8 confidence;
+
+	bool reading_mt;
+	__u8 first_contact_confidence;
+
+	__u8 mt_footer[4];
+	__u8 mt_foot_count;
 };
 
 /*
@@ -42,8 +47,11 @@
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
-	switch (usage->hid & HID_USAGE_PAGE) {
+	/* No special mappings needed for the pen and single touch */
+	if (field->physical)
+		return 0;
 
+	switch (usage->hid & HID_USAGE_PAGE) {
 	case HID_UP_GENDESK:
 		switch (usage->hid) {
 		case HID_GD_X:
@@ -66,18 +74,12 @@
 	case HID_UP_DIGITIZER:
 		switch (usage->hid) {
 		/* we do not want to map these for now */
-		case HID_DG_CONTACTID: /* value is useless */
+		case HID_DG_CONTACTID: /* Not trustworthy, squelch for now */
 		case HID_DG_INPUTMODE:
 		case HID_DG_DEVICEINDEX:
-		case HID_DG_CONTACTCOUNT:
 		case HID_DG_CONTACTMAX:
 			return -1;
 
-		/* original mapping by Rafi Rubin */
-		case HID_DG_CONFIDENCE:
-			nt_map_key_clear(BTN_TOOL_DOUBLETAP);
-			return 1;
-
 		/* width/height mapped on TouchMajor/TouchMinor/Orientation */
 		case HID_DG_WIDTH:
 			hid_map_usage(hi, usage, bit, max,
@@ -104,6 +106,10 @@
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
+	/* No special mappings needed for the pen and single touch */
+	if (field->physical)
+		return 0;
+
 	if (usage->type == EV_KEY || usage->type == EV_REL
 			|| usage->type == EV_ABS)
 		clear_bit(usage->code, *bit);
@@ -123,31 +129,30 @@
 	struct input_dev *input = field->hidinput->input;
 	struct ntrig_data *nd = hid_get_drvdata(hid);
 
+	/* No special handling needed for the pen */
+	if (field->application == HID_DG_PEN)
+		return 0;
+
         if (hid->claimed & HID_CLAIMED_INPUT) {
 		switch (usage->hid) {
-
-		case HID_DG_INRANGE:
-			if (field->application & 0x3)
-				nd->pen_active = (value != 0);
-			else
-				nd->finger_active = (value != 0);
-			return 0;
-
-		case HID_DG_INVERT:
-			nd->inverted = value;
-			return 0;
-
+		case 0xff000001:
+			/* Tag indicating the start of a multitouch group */
+			nd->reading_mt = 1;
+			nd->first_contact_confidence = 0;
+			break;
+		case HID_DG_CONFIDENCE:
+			nd->confidence = value;
+			break;
 		case HID_GD_X:
 			nd->x = value;
-			nd->reading_a_point = 1;
+			/* Clear the contact footer */
+			nd->mt_foot_count = 0;
 			break;
 		case HID_GD_Y:
 			nd->y = value;
 			break;
 		case HID_DG_CONTACTID:
 			nd->id = value;
-			/* we receive this only when in multitouch mode */
-			nd->found_contact_id = 1;
 			break;
 		case HID_DG_WIDTH:
 			nd->w = value;
@@ -159,35 +164,13 @@
 			 * report received in a finger event. We want
 			 * to emit a normal (X, Y) position
 			 */
-			if (!nd->found_contact_id) {
-				if (nd->pen_active && nd->finger_active) {
-					input_report_key(input, BTN_TOOL_DOUBLETAP, 0);
-					input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
-				}
+			if (!nd->reading_mt) {
+				input_report_key(input, BTN_TOOL_DOUBLETAP,
+						 (nd->confidence != 0));
 				input_event(input, EV_ABS, ABS_X, nd->x);
 				input_event(input, EV_ABS, ABS_Y, nd->y);
 			}
 			break;
-		case HID_DG_TIPPRESSURE:
-			/*
-			 * when in single touch mode, this is the last
-			 * report received in a pen event. We want
-			 * to emit a normal (X, Y) position
-			 */
-			if (! nd->found_contact_id) {
-				if (nd->pen_active && nd->finger_active) {
-					input_report_key(input,
-							nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
-							, 0);
-					input_report_key(input,
-							nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
-							, 1);
-				}
-				input_event(input, EV_ABS, ABS_X, nd->x);
-				input_event(input, EV_ABS, ABS_Y, nd->y);
-				input_event(input, EV_ABS, ABS_PRESSURE, value);
-			}
-			break;
 		case 0xff000002:
 			/*
 			 * we receive this when the device is in multitouch
@@ -195,10 +178,34 @@
 			 * this usage tells if the contact point is real
 			 * or a placeholder
 			 */
-			if (!nd->reading_a_point || value != 1)
+
+			/* Shouldn't get more than 4 footer packets, so skip */
+			if (nd->mt_foot_count >= 4)
 				break;
+
+			nd->mt_footer[nd->mt_foot_count++] = value;
+
+			/* if the footer isn't complete break */
+			if (nd->mt_foot_count != 4)
+				break;
+
+			/* Pen activity signal, trigger end of touch. */
+			if (nd->mt_footer[2]) {
+				nd->confidence = 0;
+				break;
+			}
+
+			/* If the contact was invalid */
+			if (!(nd->confidence && nd->mt_footer[0])
+					|| nd->w <= 250
+					|| nd->h <= 190) {
+				nd->confidence = 0;
+				break;
+			}
+
 			/* emit a normal (X, Y) for the first point only */
 			if (nd->id == 0) {
+				nd->first_contact_confidence = nd->confidence;
 				input_event(input, EV_ABS, ABS_X, nd->x);
 				input_event(input, EV_ABS, ABS_Y, nd->y);
 			}
@@ -220,8 +227,39 @@
 						ABS_MT_TOUCH_MINOR, nd->w);
 			}
 			input_mt_sync(field->hidinput->input);
-			nd->reading_a_point = 0;
-			nd->found_contact_id = 0;
+			break;
+
+		case HID_DG_CONTACTCOUNT: /* End of a multitouch group */
+			if (!nd->reading_mt)
+				break;
+
+			nd->reading_mt = 0;
+
+			if (nd->first_contact_confidence) {
+				switch (value) {
+				case 0:	/* for single touch devices */
+				case 1:
+					input_report_key(input,
+							BTN_TOOL_DOUBLETAP, 1);
+					break;
+				case 2:
+					input_report_key(input,
+							BTN_TOOL_TRIPLETAP, 1);
+					break;
+				case 3:
+				default:
+					input_report_key(input,
+							BTN_TOOL_QUADTAP, 1);
+				}
+				input_report_key(input, BTN_TOUCH, 1);
+			} else {
+				input_report_key(input,
+						BTN_TOOL_DOUBLETAP, 0);
+				input_report_key(input,
+						BTN_TOOL_TRIPLETAP, 0);
+				input_report_key(input,
+						BTN_TOOL_QUADTAP, 0);
+			}
 			break;
 
 		default:
@@ -231,8 +269,8 @@
 	}
 
 	/* we have handled the hidinput part, now remains hiddev */
-        if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
-                hid->hiddev_hid_event(hid, field, usage, value);
+	if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
 
 	return 1;
 }
@@ -241,23 +279,67 @@
 {
 	int ret;
 	struct ntrig_data *nd;
+	struct hid_input *hidinput;
+	struct input_dev *input;
+
+	if (id->driver_data)
+		hdev->quirks |= HID_QUIRK_MULTI_INPUT;
 
 	nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL);
 	if (!nd) {
 		dev_err(&hdev->dev, "cannot allocate N-Trig data\n");
 		return -ENOMEM;
 	}
-	nd->reading_a_point = 0;
-	nd->found_contact_id = 0;
+
+	nd->reading_mt = 0;
 	hid_set_drvdata(hdev, nd);
 
 	ret = hid_parse(hdev);
-	if (!ret)
-		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		dev_err(&hdev->dev, "parse failed\n");
+		goto err_free;
+	}
 
-	if (ret)
-		kfree (nd);
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		dev_err(&hdev->dev, "hw start failed\n");
+		goto err_free;
+	}
 
+
+	list_for_each_entry(hidinput, &hdev->inputs, list) {
+		input = hidinput->input;
+		switch (hidinput->report->field[0]->application) {
+		case HID_DG_PEN:
+			input->name = "N-Trig Pen";
+			break;
+		case HID_DG_TOUCHSCREEN:
+			__clear_bit(BTN_TOOL_PEN, input->keybit);
+			/*
+			 * A little something special to enable
+			 * two and three finger taps.
+			 */
+			__set_bit(BTN_TOOL_DOUBLETAP, input->keybit);
+			__set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
+			__set_bit(BTN_TOOL_QUADTAP, input->keybit);
+			/*
+			 * The physical touchscreen (single touch)
+			 * input has a value for physical, whereas
+			 * the multitouch only has logical input
+			 * fields.
+			 */
+			input->name =
+				(hidinput->report->field[0]
+				 ->physical) ?
+				"N-Trig Touchscreen" :
+				"N-Trig MultiTouch";
+			break;
+		}
+	}
+
+	return 0;
+err_free:
+	kfree(nd);
 	return ret;
 }
 
@@ -276,7 +358,7 @@
 
 static const struct hid_usage_id ntrig_grabbed_usages[] = {
 	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
-	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1 }
 };
 
 static struct hid_driver ntrig_driver = {
diff --git a/drivers/hid/hid-ortek.c b/drivers/hid/hid-ortek.c
new file mode 100644
index 0000000..aa9a960
--- /dev/null
+++ b/drivers/hid/hid-ortek.c
@@ -0,0 +1,56 @@
+/*
+ *  HID driver for Ortek WKB-2000 (wireless keyboard + mouse trackpad).
+ *  Fixes LogicalMaximum error in USB report description, see
+ *  http://bugzilla.kernel.org/show_bug.cgi?id=14787
+ *
+ *  Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+static void ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int rsize)
+{
+	if (rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x01) {
+		dev_info(&hdev->dev, "Fixing up Ortek WKB-2000 "
+				"report descriptor.\n");
+		rdesc[55] = 0x92;
+	}
+}
+
+static const struct hid_device_id ortek_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, ortek_devices);
+
+static struct hid_driver ortek_driver = {
+	.name = "ortek",
+	.id_table = ortek_devices,
+	.report_fixup = ortek_report_fixup
+};
+
+static int __init ortek_init(void)
+{
+	return hid_register_driver(&ortek_driver);
+}
+
+static void __exit ortek_exit(void)
+{
+	hid_unregister_driver(&ortek_driver);
+}
+
+module_init(ortek_init);
+module_exit(ortek_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-quanta.c b/drivers/hid/hid-quanta.c
new file mode 100644
index 0000000..01dd51c
--- /dev/null
+++ b/drivers/hid/hid-quanta.c
@@ -0,0 +1,260 @@
+/*
+ *  HID driver for Quanta Optical Touch dual-touch panels
+ *
+ *  Copyright (c) 2009-2010 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("Quanta dual-touch panel");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct quanta_data {
+	__u16 x, y;
+	__u8 id;
+	bool valid;		/* valid finger data, or just placeholder? */
+	bool first;		/* is this the first finger in this frame? */
+	bool activity_now;	/* at least one active finger in this frame? */
+	bool activity;		/* at least one active finger previously? */
+};
+
+static int quanta_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_X,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_Y,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		case HID_DG_CONFIDENCE:
+		case HID_DG_TIPSWITCH:
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+		case HID_DG_TIPPRESSURE:
+		case HID_DG_WIDTH:
+		case HID_DG_HEIGHT:
+			return -1;
+		case HID_DG_INRANGE:
+			/* touchscreen emulation */
+			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			return 1;
+		case HID_DG_CONTACTID:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TRACKING_ID);
+			return 1;
+		}
+		return 0;
+
+	case 0xff000000:
+		/* ignore vendor-specific features */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int quanta_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if (usage->type == EV_KEY || usage->type == EV_ABS)
+		clear_bit(usage->code, *bit);
+
+	return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void quanta_filter_event(struct quanta_data *td, struct input_dev *input)
+{
+	
+	td->first = !td->first; /* touchscreen emulation */
+
+	if (!td->valid) {
+		/*
+		 * touchscreen emulation: if no finger in this frame is valid
+		 * and there previously was finger activity, this is a release
+		 */ 
+		if (!td->first && !td->activity_now && td->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 0);
+			td->activity = false;
+		}
+		return;
+	}
+
+	input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
+	input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+	input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
+
+	input_mt_sync(input);
+	td->valid = false;
+
+	/* touchscreen emulation: if first active finger in this frame... */
+	if (!td->activity_now) {
+		/* if there was no previous activity, emit touch event */
+		if (!td->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 1);
+			td->activity = true;
+		}
+		td->activity_now = true;
+		/* and in any case this is our preferred finger */
+		input_event(input, EV_ABS, ABS_X, td->x);
+		input_event(input, EV_ABS, ABS_Y, td->y);
+	}
+}
+
+
+static int quanta_event(struct hid_device *hid, struct hid_field *field,
+				struct hid_usage *usage, __s32 value)
+{
+	struct quanta_data *td = hid_get_drvdata(hid);
+
+	if (hid->claimed & HID_CLAIMED_INPUT) {
+		struct input_dev *input = field->hidinput->input;
+
+		switch (usage->hid) {
+		case HID_DG_INRANGE:
+			td->valid = !!value;
+			break;
+		case HID_GD_X:
+			td->x = value;
+			break;
+		case HID_GD_Y:
+			td->y = value;
+			quanta_filter_event(td, input);
+			break;
+		case HID_DG_CONTACTID:
+			td->id = value;
+			break;
+		case HID_DG_CONTACTCOUNT:
+			/* touch emulation: this is the last field in a frame */
+			td->first = false;
+			td->activity_now = false;
+			break;
+		case HID_DG_CONFIDENCE:
+		case HID_DG_TIPSWITCH:
+			/* avoid interference from generic hidinput handling */
+			break;
+
+		default:
+			/* fallback to the generic hidinput handling */
+			return 0;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+	if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int quanta_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct quanta_data *td;
+
+	td = kmalloc(sizeof(struct quanta_data), GFP_KERNEL);
+	if (!td) {
+		dev_err(&hdev->dev, "cannot allocate Quanta Touch data\n");
+		return -ENOMEM;
+	}
+	td->valid = false;
+	td->activity = false;
+	td->activity_now = false;
+	td->first = false;
+	hid_set_drvdata(hdev, td);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree(td);
+
+	return ret;
+}
+
+static void quanta_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+	hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id quanta_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+			USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+			USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, quanta_devices);
+
+static const struct hid_usage_id quanta_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver quanta_driver = {
+	.name = "quanta-touch",
+	.id_table = quanta_devices,
+	.probe = quanta_probe,
+	.remove = quanta_remove,
+	.input_mapping = quanta_input_mapping,
+	.input_mapped = quanta_input_mapped,
+	.usage_table = quanta_grabbed_usages,
+	.event = quanta_event,
+};
+
+static int __init quanta_init(void)
+{
+	return hid_register_driver(&quanta_driver);
+}
+
+static void __exit quanta_exit(void)
+{
+	hid_unregister_driver(&quanta_driver);
+}
+
+module_init(quanta_init);
+module_exit(quanta_exit);
+
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 4e84502..9bf00d7 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -48,7 +48,7 @@
  * to "operational".  Without this, the ps3 controller will not report any
  * events.
  */
-static int sony_set_operational(struct hid_device *hdev)
+static int sony_set_operational_usb(struct hid_device *hdev)
 {
 	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
 	struct usb_device *dev = interface_to_usbdev(intf);
@@ -73,6 +73,12 @@
 	return ret;
 }
 
+static int sony_set_operational_bt(struct hid_device *hdev)
+{
+	unsigned char buf[] = { 0x53, 0xf4,  0x42, 0x03, 0x00, 0x00 };
+	return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
+}
+
 static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	int ret;
@@ -81,7 +87,7 @@
 
 	sc = kzalloc(sizeof(*sc), GFP_KERNEL);
 	if (sc == NULL) {
-		dev_err(&hdev->dev, "can't alloc apple descriptor\n");
+		dev_err(&hdev->dev, "can't alloc sony descriptor\n");
 		return -ENOMEM;
 	}
 
@@ -101,7 +107,17 @@
 		goto err_free;
 	}
 
-	ret = sony_set_operational(hdev);
+	switch (hdev->bus) {
+	case BUS_USB:
+		ret = sony_set_operational_usb(hdev);
+		break;
+	case BUS_BLUETOOTH:
+		ret = sony_set_operational_bt(hdev);
+		break;
+	default:
+		ret = 0;
+	}
+
 	if (ret < 0)
 		goto err_stop;
 
@@ -121,6 +137,7 @@
 
 static const struct hid_device_id sony_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
 		.driver_data = VAIO_RDESC_CONSTANT },
 	{ }
diff --git a/drivers/hid/hid-stantum.c b/drivers/hid/hid-stantum.c
new file mode 100644
index 0000000..2e592a0
--- /dev/null
+++ b/drivers/hid/hid-stantum.c
@@ -0,0 +1,283 @@
+/*
+ *  HID driver for Stantum multitouch panels
+ *
+ *  Copyright (c) 2009 Stephane Chatty <chatty@enac.fr>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
+MODULE_DESCRIPTION("Stantum HID multitouch panels");
+MODULE_LICENSE("GPL");
+
+#include "hid-ids.h"
+
+struct stantum_data {
+	__s32 x, y, z, w, h;	/* x, y, pressure, width, height */
+	__u16 id;		/* touch id */
+	bool valid;		/* valid finger data, or just placeholder? */
+	bool first;		/* first finger in the HID packet? */
+	bool activity;		/* at least one active finger so far? */
+};
+
+static int stantum_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	switch (usage->hid & HID_USAGE_PAGE) {
+
+	case HID_UP_GENDESK:
+		switch (usage->hid) {
+		case HID_GD_X:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_X);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_X,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		case HID_GD_Y:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_POSITION_Y);
+			/* touchscreen emulation */
+			input_set_abs_params(hi->input, ABS_Y,
+						field->logical_minimum,
+						field->logical_maximum, 0, 0);
+			return 1;
+		}
+		return 0;
+
+	case HID_UP_DIGITIZER:
+		switch (usage->hid) {
+		case HID_DG_INRANGE:
+		case HID_DG_CONFIDENCE:
+		case HID_DG_INPUTMODE:
+		case HID_DG_DEVICEINDEX:
+		case HID_DG_CONTACTCOUNT:
+		case HID_DG_CONTACTMAX:
+			return -1;
+
+		case HID_DG_TIPSWITCH:
+			/* touchscreen emulation */
+			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			return 1;
+
+		case HID_DG_WIDTH:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MAJOR);
+			return 1;
+		case HID_DG_HEIGHT:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOUCH_MINOR);
+			input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
+					1, 1, 0, 0);
+			return 1;
+		case HID_DG_TIPPRESSURE:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_PRESSURE);
+			return 1;
+
+		case HID_DG_CONTACTID:
+			hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TRACKING_ID);
+			return 1;
+
+		}
+		return 0;
+
+	case 0xff000000:
+		/* no input-oriented meaning */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int stantum_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if (usage->type == EV_KEY || usage->type == EV_ABS)
+		clear_bit(usage->code, *bit);
+
+	return 0;
+}
+
+/*
+ * this function is called when a whole finger has been parsed,
+ * so that it can decide what to send to the input layer.
+ */
+static void stantum_filter_event(struct stantum_data *sd,
+					struct input_dev *input)
+{
+	bool wide;
+
+	if (!sd->valid) {
+		/*
+		 * touchscreen emulation: if the first finger is not valid and
+		 * there previously was finger activity, this is a release
+		 */
+		if (sd->first && sd->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 0);
+			sd->activity = false;
+		}
+		return;
+	}
+
+	input_event(input, EV_ABS, ABS_MT_TRACKING_ID, sd->id);
+	input_event(input, EV_ABS, ABS_MT_POSITION_X, sd->x);
+	input_event(input, EV_ABS, ABS_MT_POSITION_Y, sd->y);
+
+	wide = (sd->w > sd->h);
+	input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
+	input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, wide ? sd->w : sd->h);
+	input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, wide ? sd->h : sd->w);
+
+	input_event(input, EV_ABS, ABS_MT_PRESSURE, sd->z);
+
+	input_mt_sync(input);
+	sd->valid = false;
+
+	/* touchscreen emulation */
+	if (sd->first) {
+		if (!sd->activity) {
+			input_event(input, EV_KEY, BTN_TOUCH, 1);
+			sd->activity = true;
+		}
+		input_event(input, EV_ABS, ABS_X, sd->x);
+		input_event(input, EV_ABS, ABS_Y, sd->y);
+	}
+	sd->first = false;
+}
+
+
+static int stantum_event(struct hid_device *hid, struct hid_field *field,
+				struct hid_usage *usage, __s32 value)
+{
+	struct stantum_data *sd = hid_get_drvdata(hid);
+
+	if (hid->claimed & HID_CLAIMED_INPUT) {
+		struct input_dev *input = field->hidinput->input;
+
+		switch (usage->hid) {
+		case HID_DG_INRANGE:
+			/* this is the last field in a finger */
+			stantum_filter_event(sd, input);
+			break;
+		case HID_DG_WIDTH:
+			sd->w = value;
+			break;
+		case HID_DG_HEIGHT:
+			sd->h = value;
+			break;
+		case HID_GD_X:
+			sd->x = value;
+			break;
+		case HID_GD_Y:
+			sd->y = value;
+			break;
+		case HID_DG_TIPPRESSURE:
+			sd->z = value;
+			break;
+		case HID_DG_CONTACTID:
+			sd->id = value;
+			break;
+		case HID_DG_CONFIDENCE:
+			sd->valid = !!value;
+			break;
+		case 0xff000002:
+			/* this comes only before the first finger */
+			sd->first = true;
+			break;
+
+		default:
+			/* ignore the others */
+			return 1;
+		}
+	}
+
+	/* we have handled the hidinput part, now remains hiddev */
+	if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
+		hid->hiddev_hid_event(hid, field, usage, value);
+
+	return 1;
+}
+
+static int stantum_probe(struct hid_device *hdev,
+				const struct hid_device_id *id)
+{
+	int ret;
+	struct stantum_data *sd;
+
+	sd = kmalloc(sizeof(struct stantum_data), GFP_KERNEL);
+	if (!sd) {
+		dev_err(&hdev->dev, "cannot allocate Stantum data\n");
+		return -ENOMEM;
+	}
+	sd->valid = false;
+	sd->first = false;
+	sd->activity = false;
+	hid_set_drvdata(hdev, sd);
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	if (ret)
+		kfree(sd);
+
+	return ret;
+}
+
+static void stantum_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+	hid_set_drvdata(hdev, NULL);
+}
+
+static const struct hid_device_id stantum_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, stantum_devices);
+
+static const struct hid_usage_id stantum_grabbed_usages[] = {
+	{ HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
+	{ HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
+};
+
+static struct hid_driver stantum_driver = {
+	.name = "stantum",
+	.id_table = stantum_devices,
+	.probe = stantum_probe,
+	.remove = stantum_remove,
+	.input_mapping = stantum_input_mapping,
+	.input_mapped = stantum_input_mapped,
+	.usage_table = stantum_grabbed_usages,
+	.event = stantum_event,
+};
+
+static int __init stantum_init(void)
+{
+	return hid_register_driver(&stantum_driver);
+}
+
+static void __exit stantum_exit(void)
+{
+	hid_unregister_driver(&stantum_driver);
+}
+
+module_init(stantum_init);
+module_exit(stantum_exit);
+
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 12dcda5..8d3b46f 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -156,7 +156,9 @@
 	struct hid_input *hidinput;
 	struct input_dev *input;
 	struct wacom_data *wdata;
+	char rep_data[2];
 	int ret;
+	int limit;
 
 	wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
 	if (wdata == NULL) {
@@ -166,6 +168,7 @@
 
 	hid_set_drvdata(hdev, wdata);
 
+	/* Parse the HID report now */
 	ret = hid_parse(hdev);
 	if (ret) {
 		dev_err(&hdev->dev, "parse failed\n");
@@ -178,6 +181,31 @@
 		goto err_free;
 	}
 
+	/*
+	 * Note that if the raw queries fail, it's not a hard failure and it
+	 * is safe to continue
+	 */
+
+	/* Set Wacom mode2 */
+	rep_data[0] = 0x03; rep_data[1] = 0x00;
+	limit = 3;
+	do {
+		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+				HID_FEATURE_REPORT);
+	} while (ret < 0 && limit-- > 0);
+	if (ret < 0)
+		dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret);
+
+	/* 0x06 - high reporting speed, 0x05 - low speed */
+	rep_data[0] = 0x06; rep_data[1] = 0x00;
+	limit = 3;
+	do {
+		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+				HID_FEATURE_REPORT);
+	} while (ret < 0 && limit-- > 0);
+	if (ret < 0)
+		dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret);
+
 	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 	input = hidinput->input;
 
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index cdd1369..d044767 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -134,7 +134,7 @@
 		goto out;
 	}
 
-	ret = dev->hid_output_raw_report(dev, buf, count);
+	ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT);
 out:
 	kfree(buf);
 	return ret;
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index e2997a8..56d06cd 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -5,7 +5,7 @@
  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
  *  Copyright (c) 2007-2008 Oliver Neukum
- *  Copyright (c) 2006-2009 Jiri Kosina
+ *  Copyright (c) 2006-2010 Jiri Kosina
  */
 
 /*
@@ -316,6 +316,7 @@
 			err_hid("usb_submit_urb(out) failed");
 			return -1;
 		}
+		usbhid->last_out = jiffies;
 	} else {
 		/*
 		 * queue work to wake up the device.
@@ -377,6 +378,7 @@
 			err_hid("usb_submit_urb(ctrl) failed");
 			return -1;
 		}
+		usbhid->last_ctrl = jiffies;
 	} else {
 		/*
 		 * queue work to wake up the device.
@@ -512,9 +514,20 @@
 		usbhid->out[usbhid->outhead].report = report;
 		usbhid->outhead = head;
 
-		if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
+		if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) {
 			if (hid_submit_out(hid))
 				clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
+		} else {
+			/*
+			 * the queue is known to run
+			 * but an earlier request may be stuck
+			 * we may need to time out
+			 * no race because this is called under
+			 * spinlock
+			 */
+			if (time_after(jiffies, usbhid->last_out + HZ * 5))
+				usb_unlink_urb(usbhid->urbout);
+		}
 		return;
 	}
 
@@ -535,9 +548,20 @@
 	usbhid->ctrl[usbhid->ctrlhead].dir = dir;
 	usbhid->ctrlhead = head;
 
-	if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
+	if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) {
 		if (hid_submit_ctrl(hid))
 			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+	} else {
+		/*
+		 * the queue is known to run
+		 * but an earlier request may be stuck
+		 * we may need to time out
+		 * no race because this is called under
+		 * spinlock
+		 */
+		if (time_after(jiffies, usbhid->last_ctrl + HZ * 5))
+			usb_unlink_urb(usbhid->urbctrl);
+	}
 }
 
 void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
@@ -774,7 +798,8 @@
 	return 0;
 }
 
-static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count)
+static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count,
+		unsigned char report_type)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
 	struct usb_device *dev = hid_to_usb_dev(hid);
@@ -785,7 +810,7 @@
 	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 		HID_REQ_SET_REPORT,
 		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-		((HID_OUTPUT_REPORT + 1) << 8) | *buf,
+		((report_type + 1) << 8) | *buf,
 		interface->desc.bInterfaceNumber, buf + 1, count - 1,
 		USB_CTRL_SET_TIMEOUT);
 
@@ -981,9 +1006,6 @@
 
 	spin_lock_init(&usbhid->lock);
 
-	usbhid->intf = intf;
-	usbhid->ifnum = interface->desc.bInterfaceNumber;
-
 	usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
 	if (!usbhid->urbctrl) {
 		ret = -ENOMEM;
@@ -1154,6 +1176,8 @@
 
 	hid->driver_data = usbhid;
 	usbhid->hid = hid;
+	usbhid->intf = intf;
+	usbhid->ifnum = interface->desc.bInterfaceNumber;
 
 	ret = hid_add_device(hid);
 	if (ret) {
@@ -1342,7 +1366,7 @@
 
 #endif /* CONFIG_PM */
 
-static struct usb_device_id hid_usb_ids [] = {
+static const struct usb_device_id hid_usb_ids[] = {
 	{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
 		.bInterfaceClass = USB_INTERFACE_CLASS_HID },
 	{ }						/* Terminating entry */
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 38773dc..7844280 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -43,8 +43,10 @@
 
 	{ USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL },
 
+	{ USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
 	{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
 
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
@@ -57,6 +59,7 @@
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 08f505c..ec20400 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -80,12 +80,14 @@
 	unsigned char ctrlhead, ctrltail;                               /* Control fifo head & tail */
 	char *ctrlbuf;                                                  /* Control buffer */
 	dma_addr_t ctrlbuf_dma;                                         /* Control buffer dma */
+	unsigned long last_ctrl;						/* record of last output for timeouts */
 
 	struct urb *urbout;                                             /* Output URB */
 	struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE];              /* Output pipe fifo */
 	unsigned char outhead, outtail;                                 /* Output pipe fifo head & tail */
 	char *outbuf;                                                   /* Output buffer */
 	dma_addr_t outbuf_dma;                                          /* Output buffer dma */
+	unsigned long last_out;							/* record of last output for timeouts */
 
 	spinlock_t lock;						/* fifo spinlock */
 	unsigned long iofl;                                             /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index aa6713b..291d939 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -100,6 +100,12 @@
 	struct input_polled_dev *dev = input_get_drvdata(input);
 
 	cancel_delayed_work_sync(&dev->work);
+	/*
+	 * Clean up work struct to remove references to the workqueue.
+	 * It may be destroyed by the next call. This causes problems
+	 * at next device open-close in case of poll_interval == 0.
+	 */
+	INIT_DELAYED_WORK(&dev->work, dev->work.work.func);
 	input_polldev_stop_workqueue();
 
 	if (dev->close)
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index d84a36e..b54aee7 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1161,9 +1161,17 @@
 	return 0;
 }
 
+static int i8042_pm_thaw(struct device *dev)
+{
+	i8042_interrupt(0, NULL);
+
+	return 0;
+}
+
 static const struct dev_pm_ops i8042_pm_ops = {
 	.suspend	= i8042_pm_reset,
 	.resume		= i8042_pm_restore,
+	.thaw		= i8042_pm_thaw,
 	.poweroff	= i8042_pm_reset,
 	.restore	= i8042_pm_restore,
 };
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 09a5e73..5256123 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -618,8 +618,8 @@
 #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
 static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1] ;
-	dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3] ;
+	dev->x = (pkt[2] << 8) | pkt[1];
+	dev->y = (pkt[4] << 8) | pkt[3];
 	dev->press = pkt[5] & 0xff;
 	dev->touch = pkt[0] & 0x01;
 
@@ -809,9 +809,9 @@
 #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
 	[DEVTYPE_GENERAL_TOUCH] = {
 		.min_xc		= 0x0,
-		.max_xc		= 0x0500,
+		.max_xc		= 0x7fff,
 		.min_yc		= 0x0,
-		.max_yc		= 0x0500,
+		.max_yc		= 0x7fff,
 		.rept_size	= 7,
 		.read_data	= general_touch_read_data,
 	},
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 3464ebc..452fde9 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -109,7 +109,7 @@
 
 config HISAX_TELESPCI
 	bool "Teles PCI"
-	depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the Teles PCI.
 	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -237,7 +237,7 @@
 
 config HISAX_NETJET
 	bool "NETjet card"
-	depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the NetJet from Traverse
 	  Technologies.
@@ -248,7 +248,7 @@
 
 config HISAX_NETJET_U
 	bool "NETspider U card"
-	depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the Netspider U interface ISDN card
 	  from Traverse Technologies.
@@ -287,7 +287,7 @@
 
 config HISAX_BKM_A4T
 	bool "Telekom A4T card"
-	depends on PCI && PCI_LEGACY
+	depends on PCI
 	help
 	  This enables HiSax support for the Telekom A4T card.
 
@@ -297,7 +297,7 @@
 
 config HISAX_SCT_QUADRO
 	bool "Scitel Quadro card"
-	depends on PCI && PCI_LEGACY
+	depends on PCI
 	help
 	  This enables HiSax support for the Scitel Quadro card.
 
@@ -316,7 +316,7 @@
 
 config HISAX_HFC_PCI
 	bool "HFC PCI-Bus cards"
-	depends on PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
 
@@ -325,7 +325,7 @@
 
 config HISAX_W6692
 	bool "Winbond W6692 based cards"
-	depends on PCI && PCI_LEGACY
+	depends on PCI
 	help
 	  This enables HiSax support for Winbond W6692 based PCI ISDN cards.
 
@@ -341,7 +341,7 @@
 
 config HISAX_ENTERNOW_PCI
 	bool "Formula-n enter:now PCI card"
-	depends on HISAX_NETJET && PCI && PCI_LEGACY && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
+	depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV))
 	help
 	  This enables HiSax support for the Formula-n enter:now PCI
 	  ISDN card.
@@ -412,7 +412,7 @@
 
 config HISAX_FRITZ_PCIPNP
 	tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)"
-	depends on PCI && PCI_LEGACY && EXPERIMENTAL
+	depends on PCI && EXPERIMENTAL
 	help
 	  This enables the driver for the AVM Fritz!Card PCI,
 	  Fritz!Card PCI v2 and Fritz!Card PnP.
diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c
index 7cabc5a..14295a1 100644
--- a/drivers/isdn/hisax/avm_pci.c
+++ b/drivers/isdn/hisax/avm_pci.c
@@ -822,7 +822,7 @@
 
 #endif /* __ISAPNP__ */
 
-#ifndef CONFIG_PCI_LEGACY
+#ifndef CONFIG_PCI
 
 static int __devinit avm_pci_setup(struct IsdnCardState *cs)
 {
@@ -835,7 +835,7 @@
 
 static int __devinit avm_pci_setup(struct IsdnCardState *cs)
 {
-	if ((dev_avm = pci_find_device(PCI_VENDOR_ID_AVM,
+	if ((dev_avm = hisax_find_pci_device(PCI_VENDOR_ID_AVM,
 		PCI_DEVICE_ID_AVM_A1, dev_avm))) {
 
 		if (pci_enable_device(dev_avm))
@@ -864,7 +864,7 @@
 	return (1);
 }
 
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
 
 int __devinit
 setup_avm_pcipnp(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c
index 9ca2ee5..9f2009c 100644
--- a/drivers/isdn/hisax/bkm_a4t.c
+++ b/drivers/isdn/hisax/bkm_a4t.c
@@ -340,7 +340,7 @@
 	} else
 		return (0);
 
-	while ((dev_a4t = pci_find_device(PCI_VENDOR_ID_ZORAN,
+	while ((dev_a4t = hisax_find_pci_device(PCI_VENDOR_ID_ZORAN,
 		PCI_DEVICE_ID_ZORAN_36120, dev_a4t))) {
 		ret = a4t_pci_probe(dev_a4t, cs, &found, &pci_memaddr);
 		if (!ret)
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index e1ff471..e775706 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -301,7 +301,7 @@
 		(sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
 		return (0);
 	if (cs->subtyp == SCT_1) {
-		while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
+		while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
 			PCI_DEVICE_ID_PLX_9050, dev_a8))) {
 			
 			sub_vendor_id = dev_a8->subsystem_vendor;
diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c
index 0b0c2e5d..780da9b 100644
--- a/drivers/isdn/hisax/diva.c
+++ b/drivers/isdn/hisax/diva.c
@@ -1148,7 +1148,7 @@
 
 #endif	/* ISAPNP */
 
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
 static struct pci_dev *dev_diva __devinitdata = NULL;
 static struct pci_dev *dev_diva_u __devinitdata = NULL;
 static struct pci_dev *dev_diva201 __devinitdata = NULL;
@@ -1159,21 +1159,21 @@
 	struct IsdnCardState *cs = card->cs;
 
 	cs->subtyp = 0;
-	if ((dev_diva = pci_find_device(PCI_VENDOR_ID_EICON,
+	if ((dev_diva = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
 		PCI_DEVICE_ID_EICON_DIVA20, dev_diva))) {
 		if (pci_enable_device(dev_diva))
 			return(0);
 		cs->subtyp = DIVA_PCI;
 		cs->irq = dev_diva->irq;
 		cs->hw.diva.cfg_reg = pci_resource_start(dev_diva, 2);
-	} else if ((dev_diva_u = pci_find_device(PCI_VENDOR_ID_EICON,
+	} else if ((dev_diva_u = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
 		PCI_DEVICE_ID_EICON_DIVA20_U, dev_diva_u))) {
 		if (pci_enable_device(dev_diva_u))
 			return(0);
 		cs->subtyp = DIVA_PCI;
 		cs->irq = dev_diva_u->irq;
 		cs->hw.diva.cfg_reg = pci_resource_start(dev_diva_u, 2);
-	} else if ((dev_diva201 = pci_find_device(PCI_VENDOR_ID_EICON,
+	} else if ((dev_diva201 = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
 		PCI_DEVICE_ID_EICON_DIVA201, dev_diva201))) {
 		if (pci_enable_device(dev_diva201))
 			return(0);
@@ -1183,7 +1183,7 @@
 			(ulong) ioremap(pci_resource_start(dev_diva201, 0), 4096);
 		cs->hw.diva.cfg_reg =
 			(ulong) ioremap(pci_resource_start(dev_diva201, 1), 4096);
-	} else if ((dev_diva202 = pci_find_device(PCI_VENDOR_ID_EICON,
+	} else if ((dev_diva202 = hisax_find_pci_device(PCI_VENDOR_ID_EICON,
 		PCI_DEVICE_ID_EICON_DIVA202, dev_diva202))) {
 		if (pci_enable_device(dev_diva202))
 			return(0);
@@ -1229,14 +1229,14 @@
 	return (1);		/* card found */
 }
 
-#else	/* if !CONFIG_PCI_LEGACY */
+#else	/* if !CONFIG_PCI */
 
 static int __devinit setup_diva_pci(struct IsdnCard *card)
 {
 	return (-1);	/* card not found; continue search */
 }
 
-#endif	/* CONFIG_PCI_LEGACY */
+#endif	/* CONFIG_PCI */
 
 int __devinit
 setup_diva(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/elsa.c b/drivers/isdn/hisax/elsa.c
index aa29d1c..23c41fc 100644
--- a/drivers/isdn/hisax/elsa.c
+++ b/drivers/isdn/hisax/elsa.c
@@ -1025,7 +1025,7 @@
 	       cs->irq);
 }
 
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
 static 	struct pci_dev *dev_qs1000 __devinitdata = NULL;
 static 	struct pci_dev *dev_qs3000 __devinitdata = NULL;
 
@@ -1035,7 +1035,7 @@
 	struct IsdnCardState *cs = card->cs;
 
 	cs->subtyp = 0;
-	if ((dev_qs1000 = pci_find_device(PCI_VENDOR_ID_ELSA,
+	if ((dev_qs1000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA,
 		PCI_DEVICE_ID_ELSA_MICROLINK, dev_qs1000))) {
 		if (pci_enable_device(dev_qs1000))
 			return(0);
@@ -1043,7 +1043,7 @@
 		cs->irq = dev_qs1000->irq;
 		cs->hw.elsa.cfg = pci_resource_start(dev_qs1000, 1);
 		cs->hw.elsa.base = pci_resource_start(dev_qs1000, 3);
-	} else if ((dev_qs3000 = pci_find_device(PCI_VENDOR_ID_ELSA,
+	} else if ((dev_qs3000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA,
 		PCI_DEVICE_ID_ELSA_QS3000, dev_qs3000))) {
 		if (pci_enable_device(dev_qs3000))
 			return(0);
@@ -1093,7 +1093,7 @@
 {
 	return (1);
 }
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
 
 static int __devinit
 setup_elsa_common(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/enternow_pci.c b/drivers/isdn/hisax/enternow_pci.c
index 39f421e..26264ab 100644
--- a/drivers/isdn/hisax/enternow_pci.c
+++ b/drivers/isdn/hisax/enternow_pci.c
@@ -406,7 +406,7 @@
 
 	for ( ;; )
 	{
-		if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+		if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
 			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
 			ret = en_pci_probe(dev_netjet, cs);
 			if (!ret)
diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c
index 0ea3b46..353982f 100644
--- a/drivers/isdn/hisax/gazel.c
+++ b/drivers/isdn/hisax/gazel.c
@@ -531,7 +531,7 @@
 	return (0);
 }
 
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
 static struct pci_dev *dev_tel __devinitdata = NULL;
 
 static int __devinit
@@ -546,7 +546,7 @@
 	found = 0;
 	seekcard = PCI_DEVICE_ID_PLX_R685;
 	for (nbseek = 0; nbseek < 4; nbseek++) {
-		if ((dev_tel = pci_find_device(PCI_VENDOR_ID_PLX,
+		if ((dev_tel = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
 					seekcard, dev_tel))) {
 			if (pci_enable_device(dev_tel))
 				return 1;
@@ -620,7 +620,7 @@
 
 	return (0);
 }
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
 
 int __devinit
 setup_gazel(struct IsdnCard *card)
@@ -640,7 +640,7 @@
 			return (0);
 	} else {
 
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
 		if (setup_gazelpci(cs))
 			return (0);
 #else
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 1091473..917cc84 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -1658,7 +1658,7 @@
 
 	i = 0;
 	while (id_list[i].vendor_id) {
-		tmp_hfcpci = pci_find_device(id_list[i].vendor_id,
+		tmp_hfcpci = hisax_find_pci_device(id_list[i].vendor_id,
 					     id_list[i].device_id,
 					     dev_hfcpci);
 		i++;
diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h
index 0685c19..832a878 100644
--- a/drivers/isdn/hisax/hisax.h
+++ b/drivers/isdn/hisax/hisax.h
@@ -1323,3 +1323,26 @@
 char *HiSax_getrev(const char *revision);
 int TeiNew(void);
 void TeiFree(void);
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+
+/* adaptation wrapper for old usage
+ * WARNING! This is unfit for use in a PCI hotplug environment,
+ * as the returned PCI device can disappear at any moment in time.
+ * Callers should be converted to use pci_get_device() instead.
+ */
+static inline struct pci_dev *hisax_find_pci_device(unsigned int vendor,
+						    unsigned int device,
+						    struct pci_dev *from)
+{
+	struct pci_dev *pdev;
+
+	pci_dev_get(from);
+	pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
+	pci_dev_put(pdev);
+	return pdev;
+}
+
+#endif
diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
index ef00633..ccaa6e1 100644
--- a/drivers/isdn/hisax/niccy.c
+++ b/drivers/isdn/hisax/niccy.c
@@ -297,12 +297,12 @@
 			return 0;
 		}
 	} else {
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
 		static struct pci_dev *niccy_dev __devinitdata;
 
 		u_int pci_ioaddr;
 		cs->subtyp = 0;
-		if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM,
+		if ((niccy_dev = hisax_find_pci_device(PCI_VENDOR_ID_SATSAGEM,
 						 PCI_DEVICE_ID_SATSAGEM_NICCY,
 						 niccy_dev))) {
 			if (pci_enable_device(niccy_dev))
@@ -354,7 +354,7 @@
 		printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
 		printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
 		return 0;
-#endif				/* CONFIG_PCI_LEGACY */
+#endif				/* CONFIG_PCI */
 	}
 	printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
 		(cs->subtyp == 1) ? "PnP" : "PCI",
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index 8d36ccc..2344e7b 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -276,7 +276,7 @@
 
 	for ( ;; )
 	{
-		if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+		if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
 			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
 			ret = njs_pci_probe(dev_netjet, cs);
 			if (!ret)
diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c
index d306c94..095e974 100644
--- a/drivers/isdn/hisax/nj_u.c
+++ b/drivers/isdn/hisax/nj_u.c
@@ -240,7 +240,7 @@
 
 	for ( ;; )
 	{
-		if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+		if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
 			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
 			ret = nju_pci_probe(dev_netjet, cs);
 			if (!ret)
diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 5569a52..69dfc8d 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -598,7 +598,7 @@
 }
 #endif /* __ISAPNP__ */
 
-#ifdef CONFIG_PCI_LEGACY
+#ifdef CONFIG_PCI
 static struct pci_dev *dev_sedl __devinitdata = NULL;
 
 static int __devinit
@@ -607,7 +607,7 @@
 	struct IsdnCardState *cs = card->cs;
 	u16 sub_vendor_id, sub_id;
 
-	if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+	if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
 			PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
 		if (pci_enable_device(dev_sedl))
 			return(0);
@@ -673,7 +673,7 @@
 	return (1);
 }
 
-#endif /* CONFIG_PCI_LEGACY */
+#endif /* CONFIG_PCI */
 
 int __devinit
 setup_sedlbauer(struct IsdnCard *card)
diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index 28b08de..b85ceb3 100644
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -300,7 +300,7 @@
 	if (cs->typ != ISDN_CTYPE_TELESPCI)
 		return (0);
 
-	if ((dev_tel = pci_find_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
+	if ((dev_tel = hisax_find_pci_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
 		if (pci_enable_device(dev_tel))
 			return(0);
 		cs->irq = dev_tel->irq;
diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c
index c4d862c..9d6e864 100644
--- a/drivers/isdn/hisax/w6692.c
+++ b/drivers/isdn/hisax/w6692.c
@@ -1007,7 +1007,7 @@
 		return (0);
 
 	while (id_list[id_idx].vendor_id) {
-		dev_w6692 = pci_find_device(id_list[id_idx].vendor_id,
+		dev_w6692 = hisax_find_pci_device(id_list[id_idx].vendor_id,
 					    id_list[id_idx].device_id,
 					    dev_w6692);
 		if (dev_w6692) {
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 23741cec..d840a10 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -322,8 +322,8 @@
 		adb_controller = NULL;
 	} else {
 #ifdef CONFIG_PPC
-		if (machine_is_compatible("AAPL,PowerBook1998") ||
-			machine_is_compatible("PowerBook1,1"))
+		if (of_machine_is_compatible("AAPL,PowerBook1998") ||
+			of_machine_is_compatible("PowerBook1,1"))
 			sleepy_trackpad = 1;
 #endif /* CONFIG_PPC */
 
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 454bc50..5738d8b 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -1899,7 +1899,7 @@
 	 */
 	if (rackmac)
 		cpu_pid_type = CPU_PID_TYPE_RACKMAC;
-	else if (machine_is_compatible("PowerMac7,3")
+	else if (of_machine_is_compatible("PowerMac7,3")
 	    && (cpu_count > 1)
 	    && fcu_fans[CPUA_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID
 	    && fcu_fans[CPUB_PUMP_RPM_INDEX].id != FCU_FAN_ABSENT_ID) {
@@ -2234,10 +2234,10 @@
 {
 	struct device_node *np;
 
-	rackmac = machine_is_compatible("RackMac3,1");
+	rackmac = of_machine_is_compatible("RackMac3,1");
 
-	if (!machine_is_compatible("PowerMac7,2") &&
-	    !machine_is_compatible("PowerMac7,3") &&
+	if (!of_machine_is_compatible("PowerMac7,2") &&
+	    !of_machine_is_compatible("PowerMac7,3") &&
 	    !rackmac)
 	    	return -ENODEV;
 
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index ba48fd7..7fb8b4d 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -490,7 +490,7 @@
 	info = of_get_property(np, "thermal-info", NULL);
 	of_node_put(np);
 
-	if( !info || !machine_is_compatible("PowerMac3,6") )
+	if( !info || !of_machine_is_compatible("PowerMac3,6") )
 		return -ENODEV;
 
 	if( info->id != 3 ) {
diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c
index a348bb0..4f3c447 100644
--- a/drivers/macintosh/via-pmu-backlight.c
+++ b/drivers/macintosh/via-pmu-backlight.c
@@ -150,13 +150,13 @@
 
 	/* Special case for the old PowerBook since I can't test on it */
 	autosave =
-		machine_is_compatible("AAPL,3400/2400") ||
-		machine_is_compatible("AAPL,3500");
+		of_machine_is_compatible("AAPL,3400/2400") ||
+		of_machine_is_compatible("AAPL,3500");
 
 	if (!autosave &&
 	    !pmac_has_backlight_type("pmu") &&
-	    !machine_is_compatible("AAPL,PowerBook1998") &&
-	    !machine_is_compatible("PowerBook1,1"))
+	    !of_machine_is_compatible("AAPL,PowerBook1998") &&
+	    !of_machine_is_compatible("PowerBook1,1"))
 		return;
 
 	snprintf(name, sizeof(name), "pmubl");
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index db379c3..4276484 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -463,8 +463,8 @@
 #endif
 
 #ifdef CONFIG_PPC32
-  	if (machine_is_compatible("AAPL,3400/2400") ||
-  		machine_is_compatible("AAPL,3500")) {
+  	if (of_machine_is_compatible("AAPL,3400/2400") ||
+  		of_machine_is_compatible("AAPL,3500")) {
 		int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
 			NULL, PMAC_MB_INFO_MODEL, 0);
 		pmu_battery_count = 1;
@@ -472,8 +472,8 @@
 			pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
 		else
 			pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;
-	} else if (machine_is_compatible("AAPL,PowerBook1998") ||
-		machine_is_compatible("PowerBook1,1")) {
+	} else if (of_machine_is_compatible("AAPL,PowerBook1998") ||
+		of_machine_is_compatible("PowerBook1,1")) {
 		pmu_battery_count = 2;
 		pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
 		pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 075b4d9..437f55c 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -468,9 +468,9 @@
 	DBG("wf: core loaded\n");
 
 	/* Don't register on old machines that use therm_pm72 for now */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		return -ENODEV;
 	platform_device_register(&wf_platform_device);
 	return 0;
diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c
index 900aade..1a77a7c 100644
--- a/drivers/macintosh/windfarm_cpufreq_clamp.c
+++ b/drivers/macintosh/windfarm_cpufreq_clamp.c
@@ -76,9 +76,9 @@
 	struct wf_control *clamp;
 
 	/* Don't register on old machines that use therm_pm72 for now */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		return -ENODEV;
 
 	clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index ed6426a..d8257d3 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -239,9 +239,9 @@
 static int __init wf_lm75_sensor_init(void)
 {
 	/* Don't register on old machines that use therm_pm72 for now */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		return -ENODEV;
 	return i2c_add_driver(&wf_lm75_driver);
 }
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index a67b349..b486eb9 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -188,9 +188,9 @@
 static int __init wf_max6690_sensor_init(void)
 {
 	/* Don't register on old machines that use therm_pm72 for now */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		return -ENODEV;
 	return i2c_add_driver(&wf_max6690_driver);
 }
diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c
index 73d695d..e0ee807 100644
--- a/drivers/macintosh/windfarm_pm112.c
+++ b/drivers/macintosh/windfarm_pm112.c
@@ -676,7 +676,7 @@
 {
 	struct device_node *cpu;
 
-	if (!machine_is_compatible("PowerMac11,2"))
+	if (!of_machine_is_compatible("PowerMac11,2"))
 		return -ENODEV;
 
 	/* Count the number of CPU cores */
diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c
index 66ec4fb1..947d4af 100644
--- a/drivers/macintosh/windfarm_pm121.c
+++ b/drivers/macintosh/windfarm_pm121.c
@@ -1008,7 +1008,7 @@
 {
 	int rc = -ENODEV;
 
-	if (machine_is_compatible("PowerMac12,1"))
+	if (of_machine_is_compatible("PowerMac12,1"))
 		rc = pm121_init_pm();
 
 	if (rc == 0) {
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index abbe206..565d5b2 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -779,8 +779,8 @@
 {
 	int rc = -ENODEV;
 
-	if (machine_is_compatible("PowerMac8,1") ||
-	    machine_is_compatible("PowerMac8,2"))
+	if (of_machine_is_compatible("PowerMac8,1") ||
+	    of_machine_is_compatible("PowerMac8,2"))
 		rc = wf_init_pm();
 
 	if (rc == 0) {
diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c
index 764c525..bea9916 100644
--- a/drivers/macintosh/windfarm_pm91.c
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -711,7 +711,7 @@
 {
 	int rc = -ENODEV;
 
-	if (machine_is_compatible("PowerMac9,1"))
+	if (of_machine_is_compatible("PowerMac9,1"))
 		rc = wf_init_pm();
 
 	if (rc == 0) {
diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c
index 9c567b9..3c19350 100644
--- a/drivers/macintosh/windfarm_smu_sensors.c
+++ b/drivers/macintosh/windfarm_smu_sensors.c
@@ -363,9 +363,9 @@
 	 * I yet have to figure out what's up with 8,2 and will have to
 	 * adjust for later, unless we can 100% trust the SDB partition...
 	 */
-	if ((machine_is_compatible("PowerMac8,1") ||
-	     machine_is_compatible("PowerMac8,2") ||
-	     machine_is_compatible("PowerMac9,1")) &&
+	if ((of_machine_is_compatible("PowerMac8,1") ||
+	     of_machine_is_compatible("PowerMac8,2") ||
+	     of_machine_is_compatible("PowerMac9,1")) &&
 	    cpuvcp_version >= 2) {
 		pow->quadratic = 1;
 		DBG("windfarm: CPU Power using quadratic transform\n");
diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c
index 54abf9e..f1c8cae 100644
--- a/drivers/md/dm-log-userspace-transfer.c
+++ b/drivers/md/dm-log-userspace-transfer.c
@@ -172,11 +172,15 @@
 {
 	int r = 0;
 	size_t dummy = 0;
-	int overhead_size =
-		sizeof(struct dm_ulog_request *) + sizeof(struct cn_msg);
+	int overhead_size = sizeof(struct dm_ulog_request) + sizeof(struct cn_msg);
 	struct dm_ulog_request *tfr = prealloced_ulog_tfr;
 	struct receiving_pkg pkg;
 
+	/*
+	 * Given the space needed to hold the 'struct cn_msg' and
+	 * 'struct dm_ulog_request' - do we have enough payload
+	 * space remaining?
+	 */
 	if (data_size > (DM_ULOG_PREALLOCED_SIZE - overhead_size)) {
 		DMINFO("Size of tfr exceeds preallocated size");
 		return -EINVAL;
@@ -191,7 +195,7 @@
 	 */
 	mutex_lock(&dm_ulog_lock);
 
-	memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size);
+	memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - sizeof(struct cn_msg));
 	memcpy(tfr->uuid, uuid, DM_UUID_LEN);
 	tfr->luid = luid;
 	tfr->seq = dm_ulog_seq++;
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index ad779bd..6c1046d 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -724,7 +724,7 @@
 	/*
 	 * Dispatch io.
 	 */
-	if (unlikely(ms->log_failure)) {
+	if (unlikely(ms->log_failure) && errors_handled(ms)) {
 		spin_lock_irq(&ms->lock);
 		bio_list_merge(&ms->failures, &sync);
 		spin_unlock_irq(&ms->lock);
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index 5f19ceb..168bd38 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -660,10 +660,9 @@
 	spin_lock_irq(&rh->region_lock);
 	if (success)
 		list_add(&reg->list, &reg->rh->recovered_regions);
-	else {
-		reg->state = DM_RH_NOSYNC;
+	else
 		list_add(&reg->list, &reg->rh->failed_recovered_regions);
-	}
+
 	spin_unlock_irq(&rh->region_lock);
 
 	rh->wakeup_workers(rh->context);
diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c
index 7d08879..c097d8a 100644
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -254,7 +254,7 @@
 	 * Issue the synchronous I/O from a different thread
 	 * to avoid generic_make_request recursion.
 	 */
-	INIT_WORK(&req.work, do_metadata);
+	INIT_WORK_ON_STACK(&req.work, do_metadata);
 	queue_work(ps->metadata_wq, &req.work);
 	flush_workqueue(ps->metadata_wq);
 
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index e0efc1a..bd58703 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -110,7 +110,7 @@
 	}
 
 	stripes = simple_strtoul(argv[0], &end, 10);
-	if (*end) {
+	if (!stripes || *end) {
 		ti->error = "Invalid stripe count";
 		return -EINVAL;
 	}
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index f53392d..f91b409 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -80,20 +80,12 @@
 };
 
 /*
- * The sysfs structure is embedded in md struct, nothing to do here
- */
-static void dm_sysfs_release(struct kobject *kobj)
-{
-}
-
-/*
  * dm kobject is embedded in mapped_device structure
  * no need to define release function here
  */
 static struct kobj_type dm_ktype = {
 	.sysfs_ops	= &dm_sysfs_ops,
 	.default_attrs	= dm_attrs,
-	.release	= dm_sysfs_release
 };
 
 /*
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 3167480..aa4e2aa 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1595,10 +1595,15 @@
 	return BLKPREP_OK;
 }
 
-static void map_request(struct dm_target *ti, struct request *clone,
-			struct mapped_device *md)
+/*
+ * Returns:
+ * 0  : the request has been processed (not requeued)
+ * !0 : the request has been requeued
+ */
+static int map_request(struct dm_target *ti, struct request *clone,
+		       struct mapped_device *md)
 {
-	int r;
+	int r, requeued = 0;
 	struct dm_rq_target_io *tio = clone->end_io_data;
 
 	/*
@@ -1625,6 +1630,7 @@
 	case DM_MAPIO_REQUEUE:
 		/* The target wants to requeue the I/O */
 		dm_requeue_unmapped_request(clone);
+		requeued = 1;
 		break;
 	default:
 		if (r > 0) {
@@ -1636,6 +1642,8 @@
 		dm_kill_unmapped_request(clone, r);
 		break;
 	}
+
+	return requeued;
 }
 
 /*
@@ -1677,12 +1685,17 @@
 		atomic_inc(&md->pending[rq_data_dir(clone)]);
 
 		spin_unlock(q->queue_lock);
-		map_request(ti, clone, md);
+		if (map_request(ti, clone, md))
+			goto requeued;
+
 		spin_lock_irq(q->queue_lock);
 	}
 
 	goto out;
 
+requeued:
+	spin_lock_irq(q->queue_lock);
+
 plug_and_out:
 	if (!elv_queue_empty(q))
 		/* Some requests still remain, retry later */
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 1b24989..465295b 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -112,11 +112,13 @@
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+	select DVB_ATBM8830 if !DVB_FE_CUSTOMISE
+	select DVB_LGS8GXX if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index 3051b64..445fa10 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -192,8 +192,8 @@
 	spi_bias *= qam_tab[p->constellation];
 	spi_bias /= p->code_rate_HP + 1;
 	spi_bias /= (guard_tab[p->guard_interval] + 32);
-	spi_bias *= 1000ULL;
-	spi_bias /= 1000ULL + ppm/1000;
+	spi_bias *= 1000;
+	spi_bias /= 1000 + ppm/1000;
 	spi_bias *= p->code_rate_HP;
 
 	val0x04 = (p->transmission_mode << 2) | p->guard_interval;
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 3182a40..ae08b07 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -4461,6 +4461,7 @@
 		request_modules(btv);
 	}
 
+	init_bttv_i2c_ir(btv);
 	bttv_input_init(btv);
 
 	/* everything is fine */
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index 63aa31a..407fa61 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -388,7 +388,12 @@
 	if (0 == btv->i2c_rc && i2c_scan)
 		do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client);
 
-	/* Instantiate the IR receiver device, if present */
+	return btv->i2c_rc;
+}
+
+/* Instantiate the I2C IR receiver device, if present */
+void __devinit init_bttv_i2c_ir(struct bttv *btv)
+{
 	if (0 == btv->i2c_rc) {
 		struct i2c_board_info info;
 		/* The external IR receiver is at i2c address 0x34 (0x35 for
@@ -408,7 +413,6 @@
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
 		i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
 	}
-	return btv->i2c_rc;
 }
 
 int __devexit fini_bttv_i2c(struct bttv *btv)
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index a1d0e9c..6cccc2a 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -279,6 +279,7 @@
 extern unsigned int bttv_gpio;
 extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
 extern int init_bttv_i2c(struct bttv *btv);
+extern void init_bttv_i2c_ir(struct bttv *btv);
 extern int fini_bttv_i2c(struct bttv *btv);
 
 #define bttv_printk if (bttv_verbose) printk
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index fc4dd60..7438f8d 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -514,7 +514,7 @@
 	/* poll to verify out of standby. Must Poll this bit */
 	for (i = 0; i < 100; i++) {
 		mt9t112_reg_read(data, client, 0x0018);
-		if (0x4000 & data)
+		if (!(0x4000 & data))
 			break;
 
 		mdelay(10);
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 50b415e..f7f7e04 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -753,7 +753,7 @@
 		buf[0] = 0xff; /* fixed */
 
 	ret = send_control_msg(pdev,
-		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
+		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1);
 
 	if (!mode && ret >= 0) {
 		if (value < 0)
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index fee6eee..006cb2ef 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -296,6 +296,7 @@
 	req_hdr->opcode = opcode;
 	req_hdr->subsystem = subsystem;
 	req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+	req_hdr->version = 0;
 }
 
 static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index d29bb53..7655436 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -4006,11 +4006,21 @@
 			}
 		}
 
-		if (!buffer_info->dma)
+		if (!buffer_info->dma) {
 			buffer_info->dma = pci_map_page(pdev,
 			                                buffer_info->page, 0,
 			                                buffer_info->length,
 			                                PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+				put_page(buffer_info->page);
+				dev_kfree_skb(skb);
+				buffer_info->page = NULL;
+				buffer_info->skb = NULL;
+				buffer_info->dma = 0;
+				adapter->alloc_rx_buff_failed++;
+				break; /* while !buffer_info->skb */
+			}
+		}
 
 		rx_desc = E1000_RX_DESC(*rx_ring, i);
 		rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
@@ -4101,6 +4111,13 @@
 						  skb->data,
 						  buffer_info->length,
 						  PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+			dev_kfree_skb(skb);
+			buffer_info->skb = NULL;
+			buffer_info->dma = 0;
+			adapter->alloc_rx_buff_failed++;
+			break; /* while !buffer_info->skb */
+		}
 
 		/*
 		 * XXX if it was allocated cleanly it will never map to a
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 3103f41..35a06b4758 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -357,12 +357,34 @@
 	u32 fctrl_reg;
 	u32 rmcs_reg;
 	u32 reg;
+	u32 link_speed = 0;
+	bool link_up;
 
 #ifdef CONFIG_DCB
 	if (hw->fc.requested_mode == ixgbe_fc_pfc)
 		goto out;
 
 #endif /* CONFIG_DCB */
+	/*
+	 * On 82598 having Rx FC on causes resets while doing 1G
+	 * so if it's on turn it off once we know link_speed. For
+	 * more details see 82598 Specification update.
+	 */
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+	if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+		switch (hw->fc.requested_mode) {
+		case ixgbe_fc_full:
+			hw->fc.requested_mode = ixgbe_fc_tx_pause;
+			break;
+		case ixgbe_fc_rx_pause:
+			hw->fc.requested_mode = ixgbe_fc_none;
+			break;
+		default:
+			/* no change */
+			break;
+		}
+	}
+
 	/* Negotiate the fc mode to use */
 	ret_val = ixgbe_fc_autoneg(hw);
 	if (ret_val)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 7b7c848..951b73c 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5763,6 +5763,10 @@
 	if (err)
 		goto err_sw_init;
 
+	/* Make it possible the adapter to be woken up via WOL */
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
 	/*
 	 * If there is a fan on this device and it has failed log the
 	 * failure.
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index d9fbad3..43aea91 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -206,7 +206,7 @@
 		mp->port_aaui = port_aaui;
 	else {
 		/* Apple Network Server uses the AAUI port */
-		if (machine_is_compatible("AAPL,ShinerESB"))
+		if (of_machine_is_compatible("AAPL,ShinerESB"))
 			mp->port_aaui = 1;
 		else {
 #ifdef CONFIG_MACE_AAUI_PORT
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 103e8b0..46997e1 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -2284,6 +2284,7 @@
  fail2:
 	efx_fini_struct(efx);
  fail1:
+	WARN_ON(rc > 0);
 	EFX_LOG(efx, "initialisation failed. rc=%d\n", rc);
 	free_netdev(net_dev);
 	return rc;
diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c
index bf0b96a..5712fdd 100644
--- a/drivers/net/sfc/falcon_boards.c
+++ b/drivers/net/sfc/falcon_boards.c
@@ -29,6 +29,15 @@
 #define FALCON_BOARD_SFN4111T 0x51
 #define FALCON_BOARD_SFN4112F 0x52
 
+/* Board temperature is about 15°C above ambient when air flow is
+ * limited. */
+#define FALCON_BOARD_TEMP_BIAS	15
+
+/* SFC4000 datasheet says: 'The maximum permitted junction temperature
+ * is 125°C; the thermal design of the environment for the SFC4000
+ * should aim to keep this well below 100°C.' */
+#define FALCON_JUNC_TEMP_MAX	90
+
 /*****************************************************************************
  * Support for LM87 sensor chip used on several boards
  */
@@ -548,16 +557,16 @@
 static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
 
 static const u8 sfe4002_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(3, 0xb0, 0xc9),		/* 5V:    4.6-5.2V */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(0, 0xa0, 0xb2),		/* AIN1:  1.66V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	LM87_IN_LIMITS(0, 0x7c, 0x99),		/* 2.5V:  1.8V +/- 10% */
+	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
+	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
+	LM87_IN_LIMITS(3, 0xac, 0xd4),		/* 5V:    5.0V +/- 10% */
+	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
+	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
+	LM87_AIN_LIMITS(0, 0x98, 0xbb),		/* AIN1:  1.66V +/- 10% */
+	LM87_AIN_LIMITS(1, 0x8a, 0xa9),		/* AIN2:  1.5V +/- 10% */
+	LM87_TEMP_INT_LIMITS(0, 80 + FALCON_BOARD_TEMP_BIAS),
+	LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
 	0
 };
 
@@ -619,14 +628,14 @@
 static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
 
 static const u8 sfn4112f_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	LM87_IN_LIMITS(0, 0x7c, 0x99),		/* 2.5V:  1.8V +/- 10% */
+	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
+	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
+	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
+	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
+	LM87_AIN_LIMITS(1, 0x8a, 0xa9),		/* AIN2:  1.5V +/- 10% */
+	LM87_TEMP_INT_LIMITS(0, 60 + FALCON_BOARD_TEMP_BIAS),
+	LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
 	0
 };
 
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 9f035b9..f66b3da 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -127,7 +127,7 @@
 	efx_dword_t reg;
 
 	/* Check for a reboot atomically with respect to efx_mcdi_copyout() */
-	rc = efx_mcdi_poll_reboot(efx);
+	rc = -efx_mcdi_poll_reboot(efx);
 	if (rc)
 		goto out;
 
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index e0d13a4..67eec7a 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -320,7 +320,7 @@
 
 	falcon_board(efx)->type->init_phy(efx);
 
-	return rc;
+	return 0;
 
  fail:
 	EFX_ERR(efx, "PHY reset timed out\n");
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 75a669d..d71c197 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1437,7 +1437,6 @@
 		/* Transmit complete. */
 		lp->lstats.tx_ints++;
 		tc35815_txdone(dev);
-		netif_wake_queue(dev);
 		if (ret < 0)
 			ret = 0;
 	}
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 4f27f02..5f3b9ea 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -584,6 +584,11 @@
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 	.driver_info = (unsigned long) &mbm_info,
 }, {
+	/* Ericsson C3607w ver 2 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190b, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &mbm_info,
+}, {
 	/* Toshiba F3507g */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index c93f58f..317aa34 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1877,13 +1877,12 @@
 /**
  *	tx_srv		-	transmit interrupt service
  *	@vptr; Velocity
- *	@status:
  *
  *	Scan the queues looking for transmitted packets that
  *	we can complete and clean up. Update any statistics as
  *	necessary/
  */
-static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
+static int velocity_tx_srv(struct velocity_info *vptr)
 {
 	struct tx_desc *td;
 	int qnum;
@@ -2090,14 +2089,12 @@
 /**
  *	velocity_rx_srv		-	service RX interrupt
  *	@vptr: velocity
- *	@status: adapter status (unused)
  *
  *	Walk the receive ring of the velocity adapter and remove
  *	any received packets from the receive queue. Hand the ring
  *	slots back to the adapter for reuse.
  */
-static int velocity_rx_srv(struct velocity_info *vptr, int status,
-		int budget_left)
+static int velocity_rx_srv(struct velocity_info *vptr, int budget_left)
 {
 	struct net_device_stats *stats = &vptr->dev->stats;
 	int rd_curr = vptr->rx.curr;
@@ -2151,32 +2148,24 @@
 	struct velocity_info *vptr = container_of(napi,
 			struct velocity_info, napi);
 	unsigned int rx_done;
-	u32 isr_status;
+	unsigned long flags;
 
-	spin_lock(&vptr->lock);
-	isr_status = mac_read_isr(vptr->mac_regs);
-
-	/* Ack the interrupt */
-	mac_write_isr(vptr->mac_regs, isr_status);
-	if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
-		velocity_error(vptr, isr_status);
-
+	spin_lock_irqsave(&vptr->lock, flags);
 	/*
 	 * Do rx and tx twice for performance (taken from the VIA
 	 * out-of-tree driver).
 	 */
-	rx_done = velocity_rx_srv(vptr, isr_status, budget / 2);
-	velocity_tx_srv(vptr, isr_status);
-	rx_done += velocity_rx_srv(vptr, isr_status, budget - rx_done);
-	velocity_tx_srv(vptr, isr_status);
-
-	spin_unlock(&vptr->lock);
+	rx_done = velocity_rx_srv(vptr, budget / 2);
+	velocity_tx_srv(vptr);
+	rx_done += velocity_rx_srv(vptr, budget - rx_done);
+	velocity_tx_srv(vptr);
 
 	/* If budget not fully consumed, exit the polling mode */
 	if (rx_done < budget) {
 		napi_complete(napi);
 		mac_enable_int(vptr->mac_regs);
 	}
+	spin_unlock_irqrestore(&vptr->lock, flags);
 
 	return rx_done;
 }
@@ -2206,10 +2195,17 @@
 		return IRQ_NONE;
 	}
 
+	/* Ack the interrupt */
+	mac_write_isr(vptr->mac_regs, isr_status);
+
 	if (likely(napi_schedule_prep(&vptr->napi))) {
 		mac_disable_int(vptr->mac_regs);
 		__napi_schedule(&vptr->napi);
 	}
+
+	if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+		velocity_error(vptr, isr_status);
+
 	spin_unlock(&vptr->lock);
 
 	return IRQ_HANDLED;
@@ -3100,7 +3096,7 @@
 	velocity_init_registers(vptr, VELOCITY_INIT_WOL);
 	mac_disable_int(vptr->mac_regs);
 
-	velocity_tx_srv(vptr, 0);
+	velocity_tx_srv(vptr);
 
 	for (i = 0; i < vptr->tx.numq; i++) {
 		if (vptr->tx.used[i])
@@ -3344,6 +3340,7 @@
 {
 	struct velocity_info *vptr = netdev_priv(dev);
 	int max_us = 0x3f * 64;
+	unsigned long flags;
 
 	/* 6 bits of  */
 	if (ecmd->tx_coalesce_usecs > max_us)
@@ -3365,6 +3362,7 @@
 			ecmd->tx_coalesce_usecs);
 
 	/* Setup the interrupt suppression and queue timers */
+	spin_lock_irqsave(&vptr->lock, flags);
 	mac_disable_int(vptr->mac_regs);
 	setup_adaptive_interrupts(vptr);
 	setup_queue_timers(vptr);
@@ -3372,6 +3370,7 @@
 	mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
 	mac_clear_isr(vptr->mac_regs);
 	mac_enable_int(vptr->mac_regs);
+	spin_unlock_irqrestore(&vptr->lock, flags);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index fa12b90..29bf336 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1615,7 +1615,7 @@
 		bf->bf_frmlen -= padsize;
 	}
 
-	if (conf_is_ht(&hw->conf) && !is_pae(skb))
+	if (conf_is_ht(&hw->conf))
 		bf->bf_state.bf_type |= BUF_HT;
 
 	bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq);
@@ -1701,7 +1701,7 @@
 			goto tx_done;
 		}
 
-		if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+		if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) {
 			/*
 			 * Try aggregation if it's a unicast data frame
 			 * and the destination is HT capable.
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index fe3bf94..c484cc2 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -115,6 +115,7 @@
 #define B43_MMIO_TSF_2			0x636	/* core rev < 3 only */
 #define B43_MMIO_TSF_3			0x638	/* core rev < 3 only */
 #define B43_MMIO_RNG			0x65A
+#define B43_MMIO_IFSSLOT		0x684	/* Interframe slot time */
 #define B43_MMIO_IFSCTL			0x688 /* Interframe space control */
 #define  B43_MMIO_IFSCTL_USE_EDCF	0x0004
 #define B43_MMIO_POWERUP_DELAY		0x6A8
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 4c41cfe..490fb45d 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -628,10 +628,17 @@
 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 {
 	/* slot_time is in usec. */
-	if (dev->phy.type != B43_PHYTYPE_G)
+	/* This test used to exit for all but a G PHY. */
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
 		return;
-	b43_write16(dev, 0x684, 510 + slot_time);
-	b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+	b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time);
+	/* Shared memory location 0x0010 is the slot time and should be
+	 * set to slot_time; however, this register is initially 0 and changing
+	 * the value adversely affects the transmit rate for BCM4311
+	 * devices. Until this behavior is unterstood, delete this step
+	 *
+	 * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+	 */
 }
 
 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 9b4b8b5..3146281 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2008,7 +2008,7 @@
 			IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
 					   "%d index %d\n", scd_ssn , index);
 			freed = iwl_tx_queue_reclaim(priv, txq_id, index);
-			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+			iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 			if (priv->mac80211_registered &&
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index de45f30..cffaae7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1125,7 +1125,7 @@
 					scd_ssn , index, txq_id, txq->swq_id);
 
 			freed = iwl_tx_queue_reclaim(priv, txq_id, index);
-			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+			iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 			if (priv->mac80211_registered &&
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
@@ -1153,16 +1153,14 @@
 				   tx_resp->failure_frame);
 
 		freed = iwl_tx_queue_reclaim(priv, txq_id, index);
-		if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
-			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+		iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 		if (priv->mac80211_registered &&
 		    (iwl_queue_space(&txq->q) > txq->q.low_mark))
 			iwl_wake_queue(priv, txq_id);
 	}
 
-	if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
-		iwl_txq_check_empty(priv, sta_id, tid, txq_id);
+	iwl_txq_check_empty(priv, sta_id, tid, txq_id);
 
 	if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
 		IWL_ERR(priv, "TODO:  Implement Tx ABORT REQUIRED!!!\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 5461f10..f36f804 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2745,6 +2745,7 @@
 			priv->staging_rxon.flags = 0;
 
 		iwl_set_rxon_channel(priv, conf->channel);
+		iwl_set_rxon_ht(priv, ht_conf);
 
 		iwl_set_flags_for_band(priv, conf->channel->band);
 		spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 27ca859..b69e972 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -446,6 +446,8 @@
 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 			 struct iwl_tx_queue *txq);
 int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq);
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+			    int sta_id, int tid, int freed);
 int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 		      int slots_num, u32 txq_id);
 void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 6f36b6e..2dbce85 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -928,7 +928,10 @@
 	if (ieee80211_is_mgmt(fc) ||
 	    ieee80211_has_protected(fc) ||
 	    ieee80211_has_morefrags(fc) ||
-	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
+	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG ||
+	    (ieee80211_is_data_qos(fc) &&
+	     *ieee80211_get_qos_ctl(hdr) &
+	     IEEE80211_QOS_CONTROL_A_MSDU_PRESENT))
 		ret = skb_linearize(skb);
 	else
 		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 87ce2bd..8f40715 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -120,6 +120,20 @@
 EXPORT_SYMBOL(iwl_txq_update_write_ptr);
 
 
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+			    int sta_id, int tid, int freed)
+{
+	if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
+		priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+	else {
+		IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n",
+			priv->stations[sta_id].tid[tid].tfds_in_queue,
+			freed);
+		priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
+	}
+}
+EXPORT_SYMBOL(iwl_free_tfds_in_queue);
+
 /**
  * iwl_tx_queue_free - Deallocate DMA queue.
  * @txq: Transmit queue to deallocate.
@@ -1131,6 +1145,7 @@
 	struct iwl_queue *q = &txq->q;
 	struct iwl_tx_info *tx_info;
 	int nfreed = 0;
+	struct ieee80211_hdr *hdr;
 
 	if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) {
 		IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, "
@@ -1145,13 +1160,16 @@
 
 		tx_info = &txq->txb[txq->q.read_ptr];
 		iwl_tx_status(priv, tx_info->skb[0]);
+
+		hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data;
+		if (hdr && ieee80211_is_data_qos(hdr->frame_control))
+			nfreed++;
 		tx_info->skb[0] = NULL;
 
 		if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl)
 			priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq);
 
 		priv->cfg->ops->lib->txq_free_tfd(priv, txq);
-		nfreed++;
 	}
 	return nfreed;
 }
@@ -1559,7 +1577,7 @@
 	if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
 		/* calculate mac80211 ampdu sw queue to wake */
 		int freed = iwl_tx_queue_reclaim(priv, scd_flow, index);
-		priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+		iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 		if ((iwl_queue_space(&txq->q) > txq->q.low_mark) &&
 		    priv->mac80211_registered &&
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 6d6ed74..f727b4a 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -794,7 +794,7 @@
 	}
 
 	bss->bss = kzalloc(bss_len, GFP_KERNEL);
-	if (!bss) {
+	if (!bss->bss) {
 		kfree(bss);
 		IWM_ERR(iwm, "Couldn't allocate bss\n");
 		return -ENOMEM;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index bc5726d..7ba3052 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -65,6 +65,7 @@
 	/* Sitecom */
 	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+	{USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B},
 	/* Sphairon Access Systems GmbH */
 	{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
 	/* Dick Smith Electronics */
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index d2fa27c..7cecc8f 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -1,3 +1,11 @@
+config OF_FLATTREE
+	bool
+	depends on OF
+
+config OF_DYNAMIC
+	def_bool y
+	depends on OF && PPC_OF
+
 config OF_DEVICE
 	def_bool y
 	depends on OF && (SPARC || PPC_OF || MICROBLAZE)
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index bdfb5f5..f232cc9 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,4 +1,5 @@
 obj-y = base.o
+obj-$(CONFIG_OF_FLATTREE) += fdt.o
 obj-$(CONFIG_OF_DEVICE) += device.o platform.o
 obj-$(CONFIG_OF_GPIO)   += gpio.o
 obj-$(CONFIG_OF_I2C)	+= of_i2c.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index e6627b2..cb96888 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -20,8 +20,10 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/spinlock.h>
+#include <linux/proc_fs.h>
 
 struct device_node *allnodes;
+struct device_node *of_chosen;
 
 /* use when traversing tree through the allnext, child, sibling,
  * or parent members of struct device_node.
@@ -37,7 +39,7 @@
 			np = np->parent;
 		ip = of_get_property(np, "#address-cells", NULL);
 		if (ip)
-			return *ip;
+			return be32_to_cpup(ip);
 	} while (np->parent);
 	/* No #address-cells property for the root node */
 	return OF_ROOT_NODE_ADDR_CELLS_DEFAULT;
@@ -53,13 +55,88 @@
 			np = np->parent;
 		ip = of_get_property(np, "#size-cells", NULL);
 		if (ip)
-			return *ip;
+			return be32_to_cpup(ip);
 	} while (np->parent);
 	/* No #size-cells property for the root node */
 	return OF_ROOT_NODE_SIZE_CELLS_DEFAULT;
 }
 EXPORT_SYMBOL(of_n_size_cells);
 
+#if !defined(CONFIG_SPARC)   /* SPARC doesn't do ref counting (yet) */
+/**
+ *	of_node_get - Increment refcount of a node
+ *	@node:	Node to inc refcount, NULL is supported to
+ *		simplify writing of callers
+ *
+ *	Returns node.
+ */
+struct device_node *of_node_get(struct device_node *node)
+{
+	if (node)
+		kref_get(&node->kref);
+	return node;
+}
+EXPORT_SYMBOL(of_node_get);
+
+static inline struct device_node *kref_to_device_node(struct kref *kref)
+{
+	return container_of(kref, struct device_node, kref);
+}
+
+/**
+ *	of_node_release - release a dynamically allocated node
+ *	@kref:  kref element of the node to be released
+ *
+ *	In of_node_put() this function is passed to kref_put()
+ *	as the destructor.
+ */
+static void of_node_release(struct kref *kref)
+{
+	struct device_node *node = kref_to_device_node(kref);
+	struct property *prop = node->properties;
+
+	/* We should never be releasing nodes that haven't been detached. */
+	if (!of_node_check_flag(node, OF_DETACHED)) {
+		pr_err("ERROR: Bad of_node_put() on %s\n", node->full_name);
+		dump_stack();
+		kref_init(&node->kref);
+		return;
+	}
+
+	if (!of_node_check_flag(node, OF_DYNAMIC))
+		return;
+
+	while (prop) {
+		struct property *next = prop->next;
+		kfree(prop->name);
+		kfree(prop->value);
+		kfree(prop);
+		prop = next;
+
+		if (!prop) {
+			prop = node->deadprops;
+			node->deadprops = NULL;
+		}
+	}
+	kfree(node->full_name);
+	kfree(node->data);
+	kfree(node);
+}
+
+/**
+ *	of_node_put - Decrement refcount of a node
+ *	@node:	Node to dec refcount, NULL is supported to
+ *		simplify writing of callers
+ *
+ */
+void of_node_put(struct device_node *node)
+{
+	if (node)
+		kref_put(&node->kref, of_node_release);
+}
+EXPORT_SYMBOL(of_node_put);
+#endif /* !CONFIG_SPARC */
+
 struct property *of_find_property(const struct device_node *np,
 				  const char *name,
 				  int *lenp)
@@ -144,6 +221,27 @@
 EXPORT_SYMBOL(of_device_is_compatible);
 
 /**
+ * of_machine_is_compatible - Test root of device tree for a given compatible value
+ * @compat: compatible string to look for in root node's compatible property.
+ *
+ * Returns true if the root node has the given value in its
+ * compatible property.
+ */
+int of_machine_is_compatible(const char *compat)
+{
+	struct device_node *root;
+	int rc = 0;
+
+	root = of_find_node_by_path("/");
+	if (root) {
+		rc = of_device_is_compatible(root, compat);
+		of_node_put(root);
+	}
+	return rc;
+}
+EXPORT_SYMBOL(of_machine_is_compatible);
+
+/**
  *  of_device_is_available - check if a device is available for use
  *
  *  @device: Node to check for availability
@@ -519,6 +617,27 @@
 EXPORT_SYMBOL_GPL(of_modalias_node);
 
 /**
+ * of_find_node_by_phandle - Find a node given a phandle
+ * @handle:	phandle of the node to find
+ *
+ * Returns a node pointer with refcount incremented, use
+ * of_node_put() on it when done.
+ */
+struct device_node *of_find_node_by_phandle(phandle handle)
+{
+	struct device_node *np;
+
+	read_lock(&devtree_lock);
+	for (np = allnodes; np; np = np->allnext)
+		if (np->phandle == handle)
+			break;
+	of_node_get(np);
+	read_unlock(&devtree_lock);
+	return np;
+}
+EXPORT_SYMBOL(of_find_node_by_phandle);
+
+/**
  * of_parse_phandle - Resolve a phandle property to a device_node pointer
  * @np: Pointer to device node holding phandle property
  * @phandle_name: Name of property holding a phandle value
@@ -578,8 +697,8 @@
 				const void **out_args)
 {
 	int ret = -EINVAL;
-	const u32 *list;
-	const u32 *list_end;
+	const __be32 *list;
+	const __be32 *list_end;
 	int size;
 	int cur_index = 0;
 	struct device_node *node = NULL;
@@ -593,7 +712,7 @@
 	list_end = list + size / sizeof(*list);
 
 	while (list < list_end) {
-		const u32 *cells;
+		const __be32 *cells;
 		const phandle *phandle;
 
 		phandle = list++;
@@ -617,7 +736,7 @@
 			goto err1;
 		}
 
-		list += *cells;
+		list += be32_to_cpup(cells);
 		if (list > list_end) {
 			pr_debug("%s: insufficient arguments length\n",
 				 np->full_name);
@@ -658,3 +777,190 @@
 	return ret;
 }
 EXPORT_SYMBOL(of_parse_phandles_with_args);
+
+/**
+ * prom_add_property - Add a property to a node
+ */
+int prom_add_property(struct device_node *np, struct property *prop)
+{
+	struct property **next;
+	unsigned long flags;
+
+	prop->next = NULL;
+	write_lock_irqsave(&devtree_lock, flags);
+	next = &np->properties;
+	while (*next) {
+		if (strcmp(prop->name, (*next)->name) == 0) {
+			/* duplicate ! don't insert it */
+			write_unlock_irqrestore(&devtree_lock, flags);
+			return -1;
+		}
+		next = &(*next)->next;
+	}
+	*next = prop;
+	write_unlock_irqrestore(&devtree_lock, flags);
+
+#ifdef CONFIG_PROC_DEVICETREE
+	/* try to add to proc as well if it was initialized */
+	if (np->pde)
+		proc_device_tree_add_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+	return 0;
+}
+
+/**
+ * prom_remove_property - Remove a property from a node.
+ *
+ * Note that we don't actually remove it, since we have given out
+ * who-knows-how-many pointers to the data using get-property.
+ * Instead we just move the property to the "dead properties"
+ * list, so it won't be found any more.
+ */
+int prom_remove_property(struct device_node *np, struct property *prop)
+{
+	struct property **next;
+	unsigned long flags;
+	int found = 0;
+
+	write_lock_irqsave(&devtree_lock, flags);
+	next = &np->properties;
+	while (*next) {
+		if (*next == prop) {
+			/* found the node */
+			*next = prop->next;
+			prop->next = np->deadprops;
+			np->deadprops = prop;
+			found = 1;
+			break;
+		}
+		next = &(*next)->next;
+	}
+	write_unlock_irqrestore(&devtree_lock, flags);
+
+	if (!found)
+		return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+	/* try to remove the proc node as well */
+	if (np->pde)
+		proc_device_tree_remove_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+	return 0;
+}
+
+/*
+ * prom_update_property - Update a property in a node.
+ *
+ * Note that we don't actually remove it, since we have given out
+ * who-knows-how-many pointers to the data using get-property.
+ * Instead we just move the property to the "dead properties" list,
+ * and add the new property to the property list
+ */
+int prom_update_property(struct device_node *np,
+			 struct property *newprop,
+			 struct property *oldprop)
+{
+	struct property **next;
+	unsigned long flags;
+	int found = 0;
+
+	write_lock_irqsave(&devtree_lock, flags);
+	next = &np->properties;
+	while (*next) {
+		if (*next == oldprop) {
+			/* found the node */
+			newprop->next = oldprop->next;
+			*next = newprop;
+			oldprop->next = np->deadprops;
+			np->deadprops = oldprop;
+			found = 1;
+			break;
+		}
+		next = &(*next)->next;
+	}
+	write_unlock_irqrestore(&devtree_lock, flags);
+
+	if (!found)
+		return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+	/* try to add to proc as well if it was initialized */
+	if (np->pde)
+		proc_device_tree_update_prop(np->pde, newprop, oldprop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+	return 0;
+}
+
+#if defined(CONFIG_OF_DYNAMIC)
+/*
+ * Support for dynamic device trees.
+ *
+ * On some platforms, the device tree can be manipulated at runtime.
+ * The routines in this section support adding, removing and changing
+ * device tree nodes.
+ */
+
+/**
+ * of_attach_node - Plug a device node into the tree and global list.
+ */
+void of_attach_node(struct device_node *np)
+{
+	unsigned long flags;
+
+	write_lock_irqsave(&devtree_lock, flags);
+	np->sibling = np->parent->child;
+	np->allnext = allnodes;
+	np->parent->child = np;
+	allnodes = np;
+	write_unlock_irqrestore(&devtree_lock, flags);
+}
+
+/**
+ * of_detach_node - "Unplug" a node from the device tree.
+ *
+ * The caller must hold a reference to the node.  The memory associated with
+ * the node is not freed until its refcount goes to zero.
+ */
+void of_detach_node(struct device_node *np)
+{
+	struct device_node *parent;
+	unsigned long flags;
+
+	write_lock_irqsave(&devtree_lock, flags);
+
+	parent = np->parent;
+	if (!parent)
+		goto out_unlock;
+
+	if (allnodes == np)
+		allnodes = np->allnext;
+	else {
+		struct device_node *prev;
+		for (prev = allnodes;
+		     prev->allnext != np;
+		     prev = prev->allnext)
+			;
+		prev->allnext = np->allnext;
+	}
+
+	if (parent->child == np)
+		parent->child = np->sibling;
+	else {
+		struct device_node *prevsib;
+		for (prevsib = np->parent->child;
+		     prevsib->sibling != np;
+		     prevsib = prevsib->sibling)
+			;
+		prevsib->sibling = np->sibling;
+	}
+
+	of_node_set_flag(np, OF_DETACHED);
+
+out_unlock:
+	write_unlock_irqrestore(&devtree_lock, flags);
+}
+#endif /* defined(CONFIG_OF_DYNAMIC) */
+
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
new file mode 100644
index 0000000..406757a
--- /dev/null
+++ b/drivers/of/fdt.c
@@ -0,0 +1,590 @@
+/*
+ * Functions for working with the Flattened Device Tree data format
+ *
+ * Copyright 2009 Benjamin Herrenschmidt, IBM Corp
+ * benh@kernel.crashing.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/initrd.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+
+#ifdef CONFIG_PPC
+#include <asm/machdep.h>
+#endif /* CONFIG_PPC */
+
+#include <asm/page.h>
+
+int __initdata dt_root_addr_cells;
+int __initdata dt_root_size_cells;
+
+struct boot_param_header *initial_boot_params;
+
+char *find_flat_dt_string(u32 offset)
+{
+	return ((char *)initial_boot_params) +
+		be32_to_cpu(initial_boot_params->off_dt_strings) + offset;
+}
+
+/**
+ * of_scan_flat_dt - scan flattened tree blob and call callback on each.
+ * @it: callback function
+ * @data: context data pointer
+ *
+ * This function is used to scan the flattened device-tree, it is
+ * used to extract the memory information at boot before we can
+ * unflatten the tree
+ */
+int __init of_scan_flat_dt(int (*it)(unsigned long node,
+				     const char *uname, int depth,
+				     void *data),
+			   void *data)
+{
+	unsigned long p = ((unsigned long)initial_boot_params) +
+		be32_to_cpu(initial_boot_params->off_dt_struct);
+	int rc = 0;
+	int depth = -1;
+
+	do {
+		u32 tag = be32_to_cpup((__be32 *)p);
+		char *pathp;
+
+		p += 4;
+		if (tag == OF_DT_END_NODE) {
+			depth--;
+			continue;
+		}
+		if (tag == OF_DT_NOP)
+			continue;
+		if (tag == OF_DT_END)
+			break;
+		if (tag == OF_DT_PROP) {
+			u32 sz = be32_to_cpup((__be32 *)p);
+			p += 8;
+			if (be32_to_cpu(initial_boot_params->version) < 0x10)
+				p = _ALIGN(p, sz >= 8 ? 8 : 4);
+			p += sz;
+			p = _ALIGN(p, 4);
+			continue;
+		}
+		if (tag != OF_DT_BEGIN_NODE) {
+			pr_err("Invalid tag %x in flat device tree!\n", tag);
+			return -EINVAL;
+		}
+		depth++;
+		pathp = (char *)p;
+		p = _ALIGN(p + strlen(pathp) + 1, 4);
+		if ((*pathp) == '/') {
+			char *lp, *np;
+			for (lp = NULL, np = pathp; *np; np++)
+				if ((*np) == '/')
+					lp = np+1;
+			if (lp != NULL)
+				pathp = lp;
+		}
+		rc = it(p, pathp, depth, data);
+		if (rc != 0)
+			break;
+	} while (1);
+
+	return rc;
+}
+
+/**
+ * of_get_flat_dt_root - find the root node in the flat blob
+ */
+unsigned long __init of_get_flat_dt_root(void)
+{
+	unsigned long p = ((unsigned long)initial_boot_params) +
+		be32_to_cpu(initial_boot_params->off_dt_struct);
+
+	while (be32_to_cpup((__be32 *)p) == OF_DT_NOP)
+		p += 4;
+	BUG_ON(be32_to_cpup((__be32 *)p) != OF_DT_BEGIN_NODE);
+	p += 4;
+	return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
+/**
+ * of_get_flat_dt_prop - Given a node in the flat blob, return the property ptr
+ *
+ * This function can be used within scan_flattened_dt callback to get
+ * access to properties
+ */
+void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
+				 unsigned long *size)
+{
+	unsigned long p = node;
+
+	do {
+		u32 tag = be32_to_cpup((__be32 *)p);
+		u32 sz, noff;
+		const char *nstr;
+
+		p += 4;
+		if (tag == OF_DT_NOP)
+			continue;
+		if (tag != OF_DT_PROP)
+			return NULL;
+
+		sz = be32_to_cpup((__be32 *)p);
+		noff = be32_to_cpup((__be32 *)(p + 4));
+		p += 8;
+		if (be32_to_cpu(initial_boot_params->version) < 0x10)
+			p = _ALIGN(p, sz >= 8 ? 8 : 4);
+
+		nstr = find_flat_dt_string(noff);
+		if (nstr == NULL) {
+			pr_warning("Can't find property index name !\n");
+			return NULL;
+		}
+		if (strcmp(name, nstr) == 0) {
+			if (size)
+				*size = sz;
+			return (void *)p;
+		}
+		p += sz;
+		p = _ALIGN(p, 4);
+	} while (1);
+}
+
+/**
+ * of_flat_dt_is_compatible - Return true if given node has compat in compatible list
+ * @node: node to test
+ * @compat: compatible string to compare with compatible list.
+ */
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+	const char *cp;
+	unsigned long cplen, l;
+
+	cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+	if (cp == NULL)
+		return 0;
+	while (cplen > 0) {
+		if (strncasecmp(cp, compat, strlen(compat)) == 0)
+			return 1;
+		l = strlen(cp) + 1;
+		cp += l;
+		cplen -= l;
+	}
+
+	return 0;
+}
+
+static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
+				       unsigned long align)
+{
+	void *res;
+
+	*mem = _ALIGN(*mem, align);
+	res = (void *)*mem;
+	*mem += size;
+
+	return res;
+}
+
+/**
+ * unflatten_dt_node - Alloc and populate a device_node from the flat tree
+ * @p: pointer to node in flat tree
+ * @dad: Parent struct device_node
+ * @allnextpp: pointer to ->allnext from last allocated device_node
+ * @fpsize: Size of the node path up at the current depth.
+ */
+unsigned long __init unflatten_dt_node(unsigned long mem,
+					unsigned long *p,
+					struct device_node *dad,
+					struct device_node ***allnextpp,
+					unsigned long fpsize)
+{
+	struct device_node *np;
+	struct property *pp, **prev_pp = NULL;
+	char *pathp;
+	u32 tag;
+	unsigned int l, allocl;
+	int has_name = 0;
+	int new_format = 0;
+
+	tag = be32_to_cpup((__be32 *)(*p));
+	if (tag != OF_DT_BEGIN_NODE) {
+		pr_err("Weird tag at start of node: %x\n", tag);
+		return mem;
+	}
+	*p += 4;
+	pathp = (char *)*p;
+	l = allocl = strlen(pathp) + 1;
+	*p = _ALIGN(*p + l, 4);
+
+	/* version 0x10 has a more compact unit name here instead of the full
+	 * path. we accumulate the full path size using "fpsize", we'll rebuild
+	 * it later. We detect this because the first character of the name is
+	 * not '/'.
+	 */
+	if ((*pathp) != '/') {
+		new_format = 1;
+		if (fpsize == 0) {
+			/* root node: special case. fpsize accounts for path
+			 * plus terminating zero. root node only has '/', so
+			 * fpsize should be 2, but we want to avoid the first
+			 * level nodes to have two '/' so we use fpsize 1 here
+			 */
+			fpsize = 1;
+			allocl = 2;
+		} else {
+			/* account for '/' and path size minus terminal 0
+			 * already in 'l'
+			 */
+			fpsize += l;
+			allocl = fpsize;
+		}
+	}
+
+	np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
+				__alignof__(struct device_node));
+	if (allnextpp) {
+		memset(np, 0, sizeof(*np));
+		np->full_name = ((char *)np) + sizeof(struct device_node);
+		if (new_format) {
+			char *fn = np->full_name;
+			/* rebuild full path for new format */
+			if (dad && dad->parent) {
+				strcpy(fn, dad->full_name);
+#ifdef DEBUG
+				if ((strlen(fn) + l + 1) != allocl) {
+					pr_debug("%s: p: %d, l: %d, a: %d\n",
+						pathp, (int)strlen(fn),
+						l, allocl);
+				}
+#endif
+				fn += strlen(fn);
+			}
+			*(fn++) = '/';
+			memcpy(fn, pathp, l);
+		} else
+			memcpy(np->full_name, pathp, l);
+		prev_pp = &np->properties;
+		**allnextpp = np;
+		*allnextpp = &np->allnext;
+		if (dad != NULL) {
+			np->parent = dad;
+			/* we temporarily use the next field as `last_child'*/
+			if (dad->next == NULL)
+				dad->child = np;
+			else
+				dad->next->sibling = np;
+			dad->next = np;
+		}
+		kref_init(&np->kref);
+	}
+	while (1) {
+		u32 sz, noff;
+		char *pname;
+
+		tag = be32_to_cpup((__be32 *)(*p));
+		if (tag == OF_DT_NOP) {
+			*p += 4;
+			continue;
+		}
+		if (tag != OF_DT_PROP)
+			break;
+		*p += 4;
+		sz = be32_to_cpup((__be32 *)(*p));
+		noff = be32_to_cpup((__be32 *)((*p) + 4));
+		*p += 8;
+		if (be32_to_cpu(initial_boot_params->version) < 0x10)
+			*p = _ALIGN(*p, sz >= 8 ? 8 : 4);
+
+		pname = find_flat_dt_string(noff);
+		if (pname == NULL) {
+			pr_info("Can't find property name in list !\n");
+			break;
+		}
+		if (strcmp(pname, "name") == 0)
+			has_name = 1;
+		l = strlen(pname) + 1;
+		pp = unflatten_dt_alloc(&mem, sizeof(struct property),
+					__alignof__(struct property));
+		if (allnextpp) {
+			/* We accept flattened tree phandles either in
+			 * ePAPR-style "phandle" properties, or the
+			 * legacy "linux,phandle" properties.  If both
+			 * appear and have different values, things
+			 * will get weird.  Don't do that. */
+			if ((strcmp(pname, "phandle") == 0) ||
+			    (strcmp(pname, "linux,phandle") == 0)) {
+				if (np->phandle == 0)
+					np->phandle = *((u32 *)*p);
+			}
+			/* And we process the "ibm,phandle" property
+			 * used in pSeries dynamic device tree
+			 * stuff */
+			if (strcmp(pname, "ibm,phandle") == 0)
+				np->phandle = *((u32 *)*p);
+			pp->name = pname;
+			pp->length = sz;
+			pp->value = (void *)*p;
+			*prev_pp = pp;
+			prev_pp = &pp->next;
+		}
+		*p = _ALIGN((*p) + sz, 4);
+	}
+	/* with version 0x10 we may not have the name property, recreate
+	 * it here from the unit name if absent
+	 */
+	if (!has_name) {
+		char *p1 = pathp, *ps = pathp, *pa = NULL;
+		int sz;
+
+		while (*p1) {
+			if ((*p1) == '@')
+				pa = p1;
+			if ((*p1) == '/')
+				ps = p1 + 1;
+			p1++;
+		}
+		if (pa < ps)
+			pa = p1;
+		sz = (pa - ps) + 1;
+		pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
+					__alignof__(struct property));
+		if (allnextpp) {
+			pp->name = "name";
+			pp->length = sz;
+			pp->value = pp + 1;
+			*prev_pp = pp;
+			prev_pp = &pp->next;
+			memcpy(pp->value, ps, sz - 1);
+			((char *)pp->value)[sz - 1] = 0;
+			pr_debug("fixed up name for %s -> %s\n", pathp,
+				(char *)pp->value);
+		}
+	}
+	if (allnextpp) {
+		*prev_pp = NULL;
+		np->name = of_get_property(np, "name", NULL);
+		np->type = of_get_property(np, "device_type", NULL);
+
+		if (!np->name)
+			np->name = "<NULL>";
+		if (!np->type)
+			np->type = "<NULL>";
+	}
+	while (tag == OF_DT_BEGIN_NODE) {
+		mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
+		tag = be32_to_cpup((__be32 *)(*p));
+	}
+	if (tag != OF_DT_END_NODE) {
+		pr_err("Weird tag at end of node: %x\n", tag);
+		return mem;
+	}
+	*p += 4;
+	return mem;
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+/**
+ * early_init_dt_check_for_initrd - Decode initrd location from flat tree
+ * @node: reference to node containing initrd location ('chosen')
+ */
+void __init early_init_dt_check_for_initrd(unsigned long node)
+{
+	unsigned long start, end, len;
+	__be32 *prop;
+
+	pr_debug("Looking for initrd properties... ");
+
+	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &len);
+	if (!prop)
+		return;
+	start = of_read_ulong(prop, len/4);
+
+	prop = of_get_flat_dt_prop(node, "linux,initrd-end", &len);
+	if (!prop)
+		return;
+	end = of_read_ulong(prop, len/4);
+
+	early_init_dt_setup_initrd_arch(start, end);
+	pr_debug("initrd_start=0x%lx  initrd_end=0x%lx\n", start, end);
+}
+#else
+inline void early_init_dt_check_for_initrd(unsigned long node)
+{
+}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+/**
+ * early_init_dt_scan_root - fetch the top level address and size cells
+ */
+int __init early_init_dt_scan_root(unsigned long node, const char *uname,
+				   int depth, void *data)
+{
+	__be32 *prop;
+
+	if (depth != 0)
+		return 0;
+
+	dt_root_size_cells = OF_ROOT_NODE_SIZE_CELLS_DEFAULT;
+	dt_root_addr_cells = OF_ROOT_NODE_ADDR_CELLS_DEFAULT;
+
+	prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+	if (prop)
+		dt_root_size_cells = be32_to_cpup(prop);
+	pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells);
+
+	prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+	if (prop)
+		dt_root_addr_cells = be32_to_cpup(prop);
+	pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells);
+
+	/* break now */
+	return 1;
+}
+
+u64 __init dt_mem_next_cell(int s, __be32 **cellp)
+{
+	__be32 *p = *cellp;
+
+	*cellp = p + s;
+	return of_read_number(p, s);
+}
+
+/**
+ * early_init_dt_scan_memory - Look for an parse memory nodes
+ */
+int __init early_init_dt_scan_memory(unsigned long node, const char *uname,
+				     int depth, void *data)
+{
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	__be32 *reg, *endp;
+	unsigned long l;
+
+	/* We are scanning "memory" nodes only */
+	if (type == NULL) {
+		/*
+		 * The longtrail doesn't have a device_type on the
+		 * /memory node, so look for the node called /memory@0.
+		 */
+		if (depth != 1 || strcmp(uname, "memory@0") != 0)
+			return 0;
+	} else if (strcmp(type, "memory") != 0)
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+	if (reg == NULL)
+		reg = of_get_flat_dt_prop(node, "reg", &l);
+	if (reg == NULL)
+		return 0;
+
+	endp = reg + (l / sizeof(__be32));
+
+	pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
+	    uname, l, reg[0], reg[1], reg[2], reg[3]);
+
+	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+		u64 base, size;
+
+		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+		size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+		if (size == 0)
+			continue;
+		pr_debug(" - %llx ,  %llx\n", (unsigned long long)base,
+		    (unsigned long long)size);
+
+		early_init_dt_add_memory_arch(base, size);
+	}
+
+	return 0;
+}
+
+int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
+				     int depth, void *data)
+{
+	unsigned long l;
+	char *p;
+
+	pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
+
+	if (depth != 1 ||
+	    (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
+		return 0;
+
+	early_init_dt_check_for_initrd(node);
+
+	/* Retreive command line */
+	p = of_get_flat_dt_prop(node, "bootargs", &l);
+	if (p != NULL && l > 0)
+		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+
+#ifdef CONFIG_CMDLINE
+#ifndef CONFIG_CMDLINE_FORCE
+	if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+#endif
+		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif /* CONFIG_CMDLINE */
+
+	early_init_dt_scan_chosen_arch(node);
+
+	pr_debug("Command line is: %s\n", cmd_line);
+
+	/* break now */
+	return 1;
+}
+
+/**
+ * unflatten_device_tree - create tree of device_nodes from flat blob
+ *
+ * unflattens the device-tree passed by the firmware, creating the
+ * tree of struct device_node. It also fills the "name" and "type"
+ * pointers of the nodes so the normal device-tree walking functions
+ * can be used.
+ */
+void __init unflatten_device_tree(void)
+{
+	unsigned long start, mem, size;
+	struct device_node **allnextp = &allnodes;
+
+	pr_debug(" -> unflatten_device_tree()\n");
+
+	/* First pass, scan for size */
+	start = ((unsigned long)initial_boot_params) +
+		be32_to_cpu(initial_boot_params->off_dt_struct);
+	size = unflatten_dt_node(0, &start, NULL, NULL, 0);
+	size = (size | 3) + 1;
+
+	pr_debug("  size is %lx, allocating...\n", size);
+
+	/* Allocate memory for the expanded device tree */
+	mem = early_init_dt_alloc_memory_arch(size + 4,
+			__alignof__(struct device_node));
+	mem = (unsigned long) __va(mem);
+
+	((__be32 *)mem)[size / 4] = cpu_to_be32(0xdeadbeef);
+
+	pr_debug("  unflattening %lx...\n", mem);
+
+	/* Second pass, do actual unflattening */
+	start = ((unsigned long)initial_boot_params) +
+		be32_to_cpu(initial_boot_params->off_dt_struct);
+	unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
+	if (be32_to_cpup((__be32 *)start) != OF_DT_END)
+		pr_warning("Weird tag at end of tree: %08x\n", *((u32 *)start));
+	if (be32_to_cpu(((__be32 *)mem)[size / 4]) != 0xdeadbeef)
+		pr_warning("End of tree marker overwritten: %08x\n",
+			   be32_to_cpu(((__be32 *)mem)[size / 4]));
+	*allnextp = NULL;
+
+	/* Get pointer to OF "/chosen" node for use everywhere */
+	of_chosen = of_find_node_by_path("/chosen");
+	if (of_chosen == NULL)
+		of_chosen = of_find_node_by_path("/chosen@0");
+
+	pr_debug(" <- unflatten_device_tree()\n");
+}
diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
index 6eea601..24c3606 100644
--- a/drivers/of/gpio.c
+++ b/drivers/of/gpio.c
@@ -36,7 +36,7 @@
 	struct of_gpio_chip *of_gc = NULL;
 	int size;
 	const void *gpio_spec;
-	const u32 *gpio_cells;
+	const __be32 *gpio_cells;
 
 	ret = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
 					  &gc, &gpio_spec);
@@ -55,7 +55,7 @@
 
 	gpio_cells = of_get_property(gc, "#gpio-cells", &size);
 	if (!gpio_cells || size != sizeof(*gpio_cells) ||
-			*gpio_cells != of_gc->gpio_cells) {
+			be32_to_cpup(gpio_cells) != of_gc->gpio_cells) {
 		pr_debug("%s: wrong #gpio-cells for %s\n",
 			 np->full_name, gc->full_name);
 		ret = -EINVAL;
@@ -127,7 +127,8 @@
 int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np,
 			 const void *gpio_spec, enum of_gpio_flags *flags)
 {
-	const u32 *gpio = gpio_spec;
+	const __be32 *gpio = gpio_spec;
+	const u32 n = be32_to_cpup(gpio);
 
 	/*
 	 * We're discouraging gpio_cells < 2, since that way you'll have to
@@ -140,13 +141,13 @@
 		return -EINVAL;
 	}
 
-	if (*gpio > of_gc->gc.ngpio)
+	if (n > of_gc->gc.ngpio)
 		return -EINVAL;
 
 	if (flags)
-		*flags = gpio[1];
+		*flags = be32_to_cpu(gpio[1]);
 
-	return *gpio;
+	return n;
 }
 EXPORT_SYMBOL(of_gpio_simple_xlate);
 
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index fa65a2b..a3a708e 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -25,7 +25,7 @@
 	for_each_child_of_node(adap_node, node) {
 		struct i2c_board_info info = {};
 		struct dev_archdata dev_ad = {};
-		const u32 *addr;
+		const __be32 *addr;
 		int len;
 
 		if (of_modalias_node(node, info.type, sizeof(info.type)) < 0)
@@ -40,7 +40,7 @@
 
 		info.irq = irq_of_parse_and_map(node, 0);
 
-		info.addr = *addr;
+		info.addr = be32_to_cpup(addr);
 
 		dev_archdata_set_node(&dev_ad, node);
 		info.archdata = &dev_ad;
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 4b22ba5..18ecae4 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -51,7 +51,7 @@
 
 	/* Loop over the child nodes and register a phy_device for each one */
 	for_each_child_of_node(np, child) {
-		const u32 *addr;
+		const __be32 *addr;
 		int len;
 
 		/* A PHY must have a reg property in the range [0-31] */
@@ -68,7 +68,7 @@
 				mdio->irq[*addr] = PHY_POLL;
 		}
 
-		phy = get_phy_device(mdio, *addr);
+		phy = get_phy_device(mdio, be32_to_cpup(addr));
 		if (!phy) {
 			dev_err(&mdio->dev, "error probing PHY at address %i\n",
 				*addr);
@@ -160,7 +160,7 @@
 	struct device_node *net_np;
 	char bus_id[MII_BUS_ID_SIZE + 3];
 	struct phy_device *phy;
-	const u32 *phy_id;
+	const __be32 *phy_id;
 	int sz;
 
 	if (!dev->dev.parent)
@@ -174,7 +174,7 @@
 	if (!phy_id || sz < sizeof(*phy_id))
 		return NULL;
 
-	sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]);
+	sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0]));
 
 	phy = phy_connect(dev, bus_id, hndlr, 0, iface);
 	return IS_ERR(phy) ? NULL : phy;
diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c
index bed0ed6..f65f48b 100644
--- a/drivers/of/of_spi.c
+++ b/drivers/of/of_spi.c
@@ -23,7 +23,7 @@
 {
 	struct spi_device *spi;
 	struct device_node *nc;
-	const u32 *prop;
+	const __be32 *prop;
 	int rc;
 	int len;
 
@@ -54,7 +54,7 @@
 			spi_dev_put(spi);
 			continue;
 		}
-		spi->chip_select = *prop;
+		spi->chip_select = be32_to_cpup(prop);
 
 		/* Mode (clock phase/polarity/etc.) */
 		if (of_find_property(nc, "spi-cpha", NULL))
@@ -72,7 +72,7 @@
 			spi_dev_put(spi);
 			continue;
 		}
-		spi->max_speed_hz = *prop;
+		spi->max_speed_hz = be32_to_cpup(prop);
 
 		/* IRQ */
 		spi->irq = irq_of_parse_and_map(nc, 0);
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index b1ecefa..7858a11 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -21,17 +21,6 @@
 
 	   If you don't know what to do here, say N.
 
-config PCI_LEGACY
-	bool "Enable deprecated pci_find_* API"
-	depends on PCI
-	default y
-	help
-	  Say Y here if you want to include support for the deprecated
-	  pci_find_device() API.  Most drivers have been converted over
-	  to using the proper hotplug APIs, so this option serves to
-	  include/exclude only a few drivers that are still using this
-	  API.
-
 config PCI_DEBUG
 	bool "PCI Debugging"
 	depends on PCI && DEBUG_KERNEL
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 4df48d5..8674c1e 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,14 +2,13 @@
 # Makefile for the PCI bus specific drivers.
 #
 
-obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o \
+obj-y		+= access.o bus.o probe.o remove.o pci.o \
 			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
 			irq.o
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_SYSFS) += slot.o
 
-obj-$(CONFIG_PCI_LEGACY) += legacy.o
-CFLAGS_legacy.o += -Wno-deprecated-declarations
+obj-$(CONFIG_PCI_QUIRKS) += quirks.o
 
 # Build PCI Express stuff if needed
 obj-$(CONFIG_PCIEPORTBUS) += pcie/
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index cef28a7..712250f 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -17,6 +17,52 @@
 
 #include "pci.h"
 
+void pci_bus_add_resource(struct pci_bus *bus, struct resource *res,
+			  unsigned int flags)
+{
+	struct pci_bus_resource *bus_res;
+
+	bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL);
+	if (!bus_res) {
+		dev_err(&bus->dev, "can't add %pR resource\n", res);
+		return;
+	}
+
+	bus_res->res = res;
+	bus_res->flags = flags;
+	list_add_tail(&bus_res->list, &bus->resources);
+}
+
+struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n)
+{
+	struct pci_bus_resource *bus_res;
+
+	if (n < PCI_BRIDGE_RESOURCE_NUM)
+		return bus->resource[n];
+
+	n -= PCI_BRIDGE_RESOURCE_NUM;
+	list_for_each_entry(bus_res, &bus->resources, list) {
+		if (n-- == 0)
+			return bus_res->res;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(pci_bus_resource_n);
+
+void pci_bus_remove_resources(struct pci_bus *bus)
+{
+	struct pci_bus_resource *bus_res, *tmp;
+	int i;
+
+	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+		bus->resource[i] = 0;
+
+	list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) {
+		list_del(&bus_res->list);
+		kfree(bus_res);
+	}
+}
+
 /**
  * pci_bus_alloc_resource - allocate a resource from a parent bus
  * @bus: PCI bus
@@ -36,11 +82,14 @@
 pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 		resource_size_t size, resource_size_t align,
 		resource_size_t min, unsigned int type_mask,
-		void (*alignf)(void *, struct resource *, resource_size_t,
-				resource_size_t),
+		resource_size_t (*alignf)(void *,
+					  const struct resource *,
+					  resource_size_t,
+					  resource_size_t),
 		void *alignf_data)
 {
 	int i, ret = -ENOMEM;
+	struct resource *r;
 	resource_size_t max = -1;
 
 	type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
@@ -49,8 +98,7 @@
 	if (!(res->flags & IORESOURCE_MEM_64))
 		max = PCIBIOS_MAX_MEM_32;
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		struct resource *r = bus->resource[i];
+	pci_bus_for_each_resource(bus, r, i) {
 		if (!r)
 			continue;
 
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 4dd7114..efa9f2d 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -332,8 +332,6 @@
 	slot->hotplug_slot->info->attention_status = 0;
 	slot->hotplug_slot->info->latch_status = acpiphp_get_latch_status(slot->acpi_slot);
 	slot->hotplug_slot->info->adapter_status = acpiphp_get_adapter_status(slot->acpi_slot);
-	slot->hotplug_slot->info->max_bus_speed = PCI_SPEED_UNKNOWN;
-	slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
 	acpiphp_slot->slot = slot;
 	snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 8e952fd..cb2fd01 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -720,12 +720,6 @@
 			-ret_val);
 		goto acpiphp_bus_add_out;
 	}
-	/*
-	 * try to start anyway.  We could have failed to add
-	 * simply because this bus had previously been added
-	 * on another add.  Don't bother with the return value
-	 * we just keep going.
-	 */
 	ret_val = acpi_bus_start(device);
 
 acpiphp_bus_add_out:
diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c
index 148fb46..fb3f846 100644
--- a/drivers/pci/hotplug/cpcihp_generic.c
+++ b/drivers/pci/hotplug/cpcihp_generic.c
@@ -162,6 +162,7 @@
 	dev = pci_get_slot(bus, PCI_DEVFN(bridge_slot, 0));
 	if(!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
 		err("Invalid bridge device %s", bridge);
+		pci_dev_put(dev);
 		return -EINVAL;
 	}
 	bus = dev->subordinate;
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 9c6a9fd..d8ffc73 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -310,8 +310,6 @@
 	u8 first_slot;
 	u8 add_support;
 	u8 push_flag;
-	enum pci_bus_speed speed;
-	enum pci_bus_speed speed_capability;
 	u8 push_button;			/* 0 = no pushbutton, 1 = pushbutton present */
 	u8 slot_switch_type;		/* 0 = no switch, 1 = switch present */
 	u8 defeature_PHP;		/* 0 = PHP not supported, 1 = PHP supported */
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 075b4f4..f184d1d 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -583,30 +583,6 @@
 	return 0;
 }
 
-static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-	struct controller *ctrl = slot->ctrl;
-
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
-	*value = ctrl->speed_capability;
-
-	return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-	struct controller *ctrl = slot->ctrl;
-
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
-
-	*value = ctrl->speed;
-
-	return 0;
-}
-
 static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
 	.set_attention_status =	set_attention_status,
 	.enable_slot =		process_SI,
@@ -616,8 +592,6 @@
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
-	.get_max_bus_speed =	get_max_bus_speed,
-	.get_cur_bus_speed =	get_cur_bus_speed,
 };
 
 #define SLOT_NAME_SIZE 10
@@ -629,6 +603,7 @@
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *hotplug_slot_info;
+	struct pci_bus *bus = ctrl->pci_bus;
 	u8 number_of_slots;
 	u8 slot_device;
 	u8 slot_number;
@@ -694,7 +669,7 @@
 			slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
 		if (is_slot66mhz(slot))
 			slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
-		if (ctrl->speed == PCI_SPEED_66MHz)
+		if (bus->cur_bus_speed == PCI_SPEED_66MHz)
 			slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
 
 		ctrl_slot =
@@ -844,6 +819,7 @@
 	u32 rc;
 	struct controller *ctrl;
 	struct pci_func *func;
+	struct pci_bus *bus;
 	int err;
 
 	err = pci_enable_device(pdev);
@@ -852,6 +828,7 @@
 			pci_name(pdev), err);
 		return err;
 	}
+	bus = pdev->subordinate;
 
 	/* Need to read VID early b/c it's used to differentiate CPQ and INTC
 	 * discovery
@@ -929,22 +906,22 @@
 			pci_read_config_byte(pdev, 0x41, &bus_cap);
 			if (bus_cap & 0x80) {
 				dbg("bus max supports 133MHz PCI-X\n");
-				ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
+				bus->max_bus_speed = PCI_SPEED_133MHz_PCIX;
 				break;
 			}
 			if (bus_cap & 0x40) {
 				dbg("bus max supports 100MHz PCI-X\n");
-				ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+				bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
 				break;
 			}
 			if (bus_cap & 20) {
 				dbg("bus max supports 66MHz PCI-X\n");
-				ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+				bus->max_bus_speed = PCI_SPEED_66MHz_PCIX;
 				break;
 			}
 			if (bus_cap & 10) {
 				dbg("bus max supports 66MHz PCI\n");
-				ctrl->speed_capability = PCI_SPEED_66MHz;
+				bus->max_bus_speed = PCI_SPEED_66MHz;
 				break;
 			}
 
@@ -955,7 +932,7 @@
 		case PCI_SUB_HPC_ID:
 			/* Original 6500/7000 implementation */
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 			ctrl->push_button = 0;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -966,7 +943,7 @@
 			/* First Pushbutton implementation */
 			ctrl->push_flag = 1;
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 			ctrl->push_button = 1;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -976,7 +953,7 @@
 		case PCI_SUB_HPC_ID_INTC:
 			/* Third party (6500/7000) */
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 			ctrl->push_button = 0;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -987,7 +964,7 @@
 			/* First 66 Mhz implementation */
 			ctrl->push_flag = 1;
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_66MHz;
+			bus->max_bus_speed = PCI_SPEED_66MHz;
 			ctrl->push_button = 1;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -998,7 +975,7 @@
 			/* First PCI-X implementation, 100MHz */
 			ctrl->push_flag = 1;
 			ctrl->slot_switch_type = 1;
-			ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+			bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
 			ctrl->push_button = 1;
 			ctrl->pci_config_space = 1;
 			ctrl->defeature_PHP = 1;
@@ -1015,9 +992,9 @@
 	case PCI_VENDOR_ID_INTEL:
 		/* Check for speed capability (0=33, 1=66) */
 		if (subsystem_deviceid & 0x0001)
-			ctrl->speed_capability = PCI_SPEED_66MHz;
+			bus->max_bus_speed = PCI_SPEED_66MHz;
 		else
-			ctrl->speed_capability = PCI_SPEED_33MHz;
+			bus->max_bus_speed = PCI_SPEED_33MHz;
 
 		/* Check for push button */
 		if (subsystem_deviceid & 0x0002)
@@ -1079,7 +1056,7 @@
 					pdev->bus->number);
 
 	dbg("Hotplug controller capabilities:\n");
-	dbg("    speed_capability       %d\n", ctrl->speed_capability);
+	dbg("    speed_capability       %d\n", bus->max_bus_speed);
 	dbg("    slot_switch_type       %s\n", ctrl->slot_switch_type ?
 					"switch present" : "no switch");
 	dbg("    defeature_PHP          %s\n", ctrl->defeature_PHP ?
@@ -1142,7 +1119,7 @@
 	}
 
 	/* Check for 66Mhz operation */
-	ctrl->speed = get_controller_speed(ctrl);
+	bus->cur_bus_speed = get_controller_speed(ctrl);
 
 
 	/********************************************************
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 0ff689a..e43908d 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1130,12 +1130,13 @@
 static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
 {
 	struct slot *slot;
+	struct pci_bus *bus = ctrl->pci_bus;
 	u8 reg;
 	u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
 	u16 reg16;
 	u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
 
-	if (ctrl->speed == adapter_speed)
+	if (bus->cur_bus_speed == adapter_speed)
 		return 0;
 
 	/* We don't allow freq/mode changes if we find another adapter running
@@ -1152,7 +1153,7 @@
 		 * lower speed/mode, we allow the new adapter to function at
 		 * this rate if supported
 		 */
-		if (ctrl->speed < adapter_speed)
+		if (bus->cur_bus_speed < adapter_speed)
 			return 0;
 
 		return 1;
@@ -1161,20 +1162,20 @@
 	/* If the controller doesn't support freq/mode changes and the
 	 * controller is running at a higher mode, we bail
 	 */
-	if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
+	if ((bus->cur_bus_speed > adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 1;
 
 	/* But we allow the adapter to run at a lower rate if possible */
-	if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
+	if ((bus->cur_bus_speed < adapter_speed) && (!ctrl->pcix_speed_capability))
 		return 0;
 
 	/* We try to set the max speed supported by both the adapter and
 	 * controller
 	 */
-	if (ctrl->speed_capability < adapter_speed) {
-		if (ctrl->speed == ctrl->speed_capability)
+	if (bus->max_bus_speed < adapter_speed) {
+		if (bus->cur_bus_speed == bus->max_bus_speed)
 			return 0;
-		adapter_speed = ctrl->speed_capability;
+		adapter_speed = bus->max_bus_speed;
 	}
 
 	writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
@@ -1229,8 +1230,8 @@
 	pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
 
 	/* Only if mode change...*/
-	if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
-		((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
+	if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
+		((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
 			set_SOGO(ctrl);
 
 	wait_for_ctrl_irq(ctrl);
@@ -1243,7 +1244,7 @@
 	set_SOGO(ctrl);
 	wait_for_ctrl_irq(ctrl);
 
-	ctrl->speed = adapter_speed;
+	bus->cur_bus_speed = adapter_speed;
 	slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
 	info("Successfully changed frequency/mode for adapter in slot %d\n",
@@ -1269,6 +1270,7 @@
  */
 static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
 {
+	struct pci_bus *bus = ctrl->pci_bus;
 	u8 hp_slot;
 	u8 temp_byte;
 	u8 adapter_speed;
@@ -1309,7 +1311,7 @@
 		wait_for_ctrl_irq (ctrl);
 
 		adapter_speed = get_adapter_speed(ctrl, hp_slot);
-		if (ctrl->speed != adapter_speed)
+		if (bus->cur_bus_speed != adapter_speed)
 			if (set_controller_speed(ctrl, adapter_speed, hp_slot))
 				rc = WRONG_BUS_FREQUENCY;
 
@@ -1426,6 +1428,7 @@
 	u32 temp_register = 0xFFFFFFFF;
 	u32 rc = 0;
 	struct pci_func *new_slot = NULL;
+	struct pci_bus *bus = ctrl->pci_bus;
 	struct slot *p_slot;
 	struct resource_lists res_lists;
 
@@ -1456,7 +1459,7 @@
 	wait_for_ctrl_irq (ctrl);
 
 	adapter_speed = get_adapter_speed(ctrl, hp_slot);
-	if (ctrl->speed != adapter_speed)
+	if (bus->cur_bus_speed != adapter_speed)
 		if (set_controller_speed(ctrl, adapter_speed, hp_slot))
 			rc = WRONG_BUS_FREQUENCY;
 
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 7485ffd..d934dd4 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -395,89 +395,40 @@
 	return rc;
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static int get_max_bus_speed(struct slot *slot)
 {
-	int rc = -ENODEV;
-	struct slot *pslot;
+	int rc;
 	u8 mode = 0;
+	enum pci_bus_speed speed;
+	struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;
 
-	debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
-		hotplug_slot, value);
+	debug("%s - Entry slot[%p]\n", __func__, slot);
 
 	ibmphp_lock_operations();
+	mode = slot->supported_bus_mode;
+	speed = slot->supported_speed; 
+	ibmphp_unlock_operations();
 
-	if (hotplug_slot) {
-		pslot = hotplug_slot->private;
-		if (pslot) {
-			rc = 0;
-			mode = pslot->supported_bus_mode;
-			*value = pslot->supported_speed; 
-			switch (*value) {
-			case BUS_SPEED_33:
-				break;
-			case BUS_SPEED_66:
-				if (mode == BUS_MODE_PCIX) 
-					*value += 0x01;
-				break;
-			case BUS_SPEED_100:
-			case BUS_SPEED_133:
-				*value = pslot->supported_speed + 0x01;
-				break;
-			default:
-				/* Note (will need to change): there would be soon 256, 512 also */
-				rc = -ENODEV;
-			}
-		}
+	switch (speed) {
+	case BUS_SPEED_33:
+		break;
+	case BUS_SPEED_66:
+		if (mode == BUS_MODE_PCIX) 
+			speed += 0x01;
+		break;
+	case BUS_SPEED_100:
+	case BUS_SPEED_133:
+		speed += 0x01;
+		break;
+	default:
+		/* Note (will need to change): there would be soon 256, 512 also */
+		rc = -ENODEV;
 	}
 
-	ibmphp_unlock_operations();
-	debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
-	return rc;
-}
+	if (!rc)
+		bus->max_bus_speed = speed;
 
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	int rc = -ENODEV;
-	struct slot *pslot;
-	u8 mode = 0;
-
-	debug("%s - Entry hotplug_slot[%p] pvalue[%p]\n", __func__,
-		hotplug_slot, value);
-
-	ibmphp_lock_operations();
-
-	if (hotplug_slot) {
-		pslot = hotplug_slot->private;
-		if (pslot) {
-			rc = get_cur_bus_info(&pslot);
-			if (!rc) {
-				mode = pslot->bus_on->current_bus_mode;
-				*value = pslot->bus_on->current_speed;
-				switch (*value) {
-				case BUS_SPEED_33:
-					break;
-				case BUS_SPEED_66:
-					if (mode == BUS_MODE_PCIX) 
-						*value += 0x01;
-					else if (mode == BUS_MODE_PCI)
-						;
-					else
-						*value = PCI_SPEED_UNKNOWN;
-					break;
-				case BUS_SPEED_100:
-				case BUS_SPEED_133:
-					*value += 0x01;
-					break;
-				default:
-					/* Note of change: there would also be 256, 512 soon */
-					rc = -ENODEV;
-				}
-			}
-		}
-	}
-
-	ibmphp_unlock_operations();
-	debug("%s - Exit rc[%d] value[%x]\n", __func__, rc, *value);
+	debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed);
 	return rc;
 }
 
@@ -572,6 +523,7 @@
 		if (slot_cur->bus_on->current_speed == 0xFF) 
 			if (get_cur_bus_info(&slot_cur)) 
 				return -1;
+		get_max_bus_speed(slot_cur);
 
 		if (slot_cur->ctrl->options == 0xFF)
 			if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
@@ -655,6 +607,7 @@
 int ibmphp_update_slot_info(struct slot *slot_cur)
 {
 	struct hotplug_slot_info *info;
+	struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus;
 	int rc;
 	u8 bus_speed;
 	u8 mode;
@@ -700,8 +653,7 @@
 			bus_speed = PCI_SPEED_UNKNOWN;
 	}
 
-	info->cur_bus_speed = bus_speed;
-	info->max_bus_speed = slot_cur->hotplug_slot->info->max_bus_speed;
+	bus->cur_bus_speed = bus_speed;
 	// To do: bus_names 
 	
 	rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
@@ -1326,8 +1278,6 @@
 	.get_attention_status =		get_attention_status,
 	.get_latch_status =		get_latch_status,
 	.get_adapter_status =		get_adapter_present,
-	.get_max_bus_speed =		get_max_bus_speed,
-	.get_cur_bus_speed =		get_cur_bus_speed,
 /*	.get_max_adapter_speed =	get_max_adapter_speed,
 	.get_bus_name_status =		get_bus_name,
 */
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index c1abac8..5becbde 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -245,7 +245,7 @@
 
 int __init ibmphp_access_ebda (void)
 {
-	u8 format, num_ctlrs, rio_complete, hs_complete;
+	u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz;
 	u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base;
 	int rc = 0;
 
@@ -260,7 +260,16 @@
 	iounmap (io_mem);
 	debug ("returned ebda segment: %x\n", ebda_seg);
 	
-	io_mem = ioremap(ebda_seg<<4, 1024);
+	io_mem = ioremap(ebda_seg<<4, 1);
+	if (!io_mem)
+		return -ENOMEM;
+	ebda_sz = readb(io_mem);
+	iounmap(io_mem);
+	debug("ebda size: %d(KiB)\n", ebda_sz);
+	if (ebda_sz == 0)
+		return -ENOMEM;
+
+	io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024));
 	if (!io_mem )
 		return -ENOMEM;
 	next_offset = 0x180;
diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c
index c7084f0..1aaf3f3 100644
--- a/drivers/pci/hotplug/ibmphp_hpc.c
+++ b/drivers/pci/hotplug/ibmphp_hpc.c
@@ -35,6 +35,7 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/sched.h>
+#include <linux/semaphore.h>
 #include <linux/kthread.h>
 #include "ibmphp.h"
 
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 38183a5..728b119 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -64,32 +64,6 @@
 static LIST_HEAD(pci_hotplug_slot_list);
 static DEFINE_MUTEX(pci_hp_mutex);
 
-/* these strings match up with the values in pci_bus_speed */
-static char *pci_bus_speed_strings[] = {
-	"33 MHz PCI",		/* 0x00 */
-	"66 MHz PCI",		/* 0x01 */
-	"66 MHz PCI-X",		/* 0x02 */
-	"100 MHz PCI-X",	/* 0x03 */
-	"133 MHz PCI-X",	/* 0x04 */
-	NULL,			/* 0x05 */
-	NULL,			/* 0x06 */
-	NULL,			/* 0x07 */
-	NULL,			/* 0x08 */
-	"66 MHz PCI-X 266",	/* 0x09 */
-	"100 MHz PCI-X 266",	/* 0x0a */
-	"133 MHz PCI-X 266",	/* 0x0b */
-	NULL,			/* 0x0c */
-	NULL,			/* 0x0d */
-	NULL,			/* 0x0e */
-	NULL,			/* 0x0f */
-	NULL,			/* 0x10 */
-	"66 MHz PCI-X 533",	/* 0x11 */
-	"100 MHz PCI-X 533",	/* 0x12 */
-	"133 MHz PCI-X 533",	/* 0x13 */
-	"2.5 GT/s PCIe",	/* 0x14 */
-	"5.0 GT/s PCIe",	/* 0x15 */
-};
-
 #ifdef CONFIG_HOTPLUG_PCI_CPCI
 extern int cpci_hotplug_init(int debug);
 extern void cpci_hotplug_exit(void);
@@ -118,8 +92,6 @@
 GET_STATUS(attention_status, u8)
 GET_STATUS(latch_status, u8)
 GET_STATUS(adapter_status, u8)
-GET_STATUS(max_bus_speed, enum pci_bus_speed)
-GET_STATUS(cur_bus_speed, enum pci_bus_speed)
 
 static ssize_t power_read_file(struct pci_slot *slot, char *buf)
 {
@@ -263,60 +235,6 @@
 	.show = presence_read_file,
 };
 
-static char *unknown_speed = "Unknown bus speed";
-
-static ssize_t max_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
-	char *speed_string;
-	int retval;
-	enum pci_bus_speed value;
-	
-	retval = get_max_bus_speed(slot->hotplug, &value);
-	if (retval)
-		goto exit;
-
-	if (value == PCI_SPEED_UNKNOWN)
-		speed_string = unknown_speed;
-	else
-		speed_string = pci_bus_speed_strings[value];
-	
-	retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
-	return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_max_bus_speed = {
-	.attr = {.name = "max_bus_speed", .mode = S_IFREG | S_IRUGO},
-	.show = max_bus_speed_read_file,
-};
-
-static ssize_t cur_bus_speed_read_file(struct pci_slot *slot, char *buf)
-{
-	char *speed_string;
-	int retval;
-	enum pci_bus_speed value;
-
-	retval = get_cur_bus_speed(slot->hotplug, &value);
-	if (retval)
-		goto exit;
-
-	if (value == PCI_SPEED_UNKNOWN)
-		speed_string = unknown_speed;
-	else
-		speed_string = pci_bus_speed_strings[value];
-	
-	retval = sprintf (buf, "%s\n", speed_string);
-
-exit:
-	return retval;
-}
-
-static struct pci_slot_attribute hotplug_slot_attr_cur_bus_speed = {
-	.attr = {.name = "cur_bus_speed", .mode = S_IFREG | S_IRUGO},
-	.show = cur_bus_speed_read_file,
-};
-
 static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf,
 		size_t count)
 {
@@ -391,26 +309,6 @@
 	return false;
 }
 
-static bool has_max_bus_speed_file(struct pci_slot *pci_slot)
-{
-	struct hotplug_slot *slot = pci_slot->hotplug;
-	if ((!slot) || (!slot->ops))
-		return false;
-	if (slot->ops->get_max_bus_speed)
-		return true;
-	return false;
-}
-
-static bool has_cur_bus_speed_file(struct pci_slot *pci_slot)
-{
-	struct hotplug_slot *slot = pci_slot->hotplug;
-	if ((!slot) || (!slot->ops))
-		return false;
-	if (slot->ops->get_cur_bus_speed)
-		return true;
-	return false;
-}
-
 static bool has_test_file(struct pci_slot *pci_slot)
 {
 	struct hotplug_slot *slot = pci_slot->hotplug;
@@ -456,20 +354,6 @@
 			goto exit_adapter;
 	}
 
-	if (has_max_bus_speed_file(slot)) {
-		retval = sysfs_create_file(&slot->kobj,
-					&hotplug_slot_attr_max_bus_speed.attr);
-		if (retval)
-			goto exit_max_speed;
-	}
-
-	if (has_cur_bus_speed_file(slot)) {
-		retval = sysfs_create_file(&slot->kobj,
-					&hotplug_slot_attr_cur_bus_speed.attr);
-		if (retval)
-			goto exit_cur_speed;
-	}
-
 	if (has_test_file(slot)) {
 		retval = sysfs_create_file(&slot->kobj,
 					   &hotplug_slot_attr_test.attr);
@@ -480,14 +364,6 @@
 	goto exit;
 
 exit_test:
-	if (has_cur_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_cur_bus_speed.attr);
-exit_cur_speed:
-	if (has_max_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_max_bus_speed.attr);
-exit_max_speed:
 	if (has_adapter_file(slot))
 		sysfs_remove_file(&slot->kobj,
 				  &hotplug_slot_attr_presence.attr);
@@ -523,14 +399,6 @@
 		sysfs_remove_file(&slot->kobj,
 				  &hotplug_slot_attr_presence.attr);
 
-	if (has_max_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_max_bus_speed.attr);
-
-	if (has_cur_bus_speed_file(slot))
-		sysfs_remove_file(&slot->kobj,
-				  &hotplug_slot_attr_cur_bus_speed.attr);
-
 	if (has_test_file(slot))
 		sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
 
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5674b20..920f820 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -69,8 +69,6 @@
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 /**
  * release_slot - free up the memory used by a slot
@@ -113,8 +111,6 @@
 	ops->disable_slot = disable_slot;
 	ops->get_power_status = get_power_status;
 	ops->get_adapter_status = get_adapter_status;
-	ops->get_max_bus_speed = get_max_bus_speed;
-	ops->get_cur_bus_speed = get_cur_bus_speed;
 	if (MRL_SENS(ctrl))
 		ops->get_latch_status = get_latch_status;
 	if (ATTN_LED(ctrl)) {
@@ -227,27 +223,6 @@
 	return pciehp_get_adapter_status(slot, value);
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
-				enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	return pciehp_get_max_link_speed(slot, value);
-}
-
-static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = hotplug_slot->private;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	return pciehp_get_cur_link_speed(slot, value);
-}
-
 static int pciehp_probe(struct pcie_device *dev)
 {
 	int rc;
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index d6ac1b2..9a7f247 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -341,6 +341,7 @@
 		p_slot->state = POWERON_STATE;
 		break;
 	default:
+		kfree(info);
 		goto out;
 	}
 	queue_work(pciehp_wq, &info->work);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 10040d5..40b48f5 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -492,6 +492,7 @@
 	u16 slot_cmd;
 	u16 cmd_mask;
 	u16 slot_status;
+	u16 lnk_status;
 	int retval = 0;
 
 	/* Clear sticky power-fault bit from previous power failures */
@@ -523,6 +524,14 @@
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
 
+	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
+	if (retval) {
+		ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n",
+				__func__);
+		return retval;
+	}
+	pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
+
 	return retval;
 }
 
@@ -610,37 +619,6 @@
 	return IRQ_HANDLED;
 }
 
-int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
-	struct controller *ctrl = slot->ctrl;
-	enum pcie_link_speed lnk_speed;
-	u32	lnk_cap;
-	int retval = 0;
-
-	retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap);
-	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
-		return retval;
-	}
-
-	switch (lnk_cap & 0x000F) {
-	case 1:
-		lnk_speed = PCIE_2_5GB;
-		break;
-	case 2:
-		lnk_speed = PCIE_5_0GB;
-		break;
-	default:
-		lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
-		break;
-	}
-
-	*value = lnk_speed;
-	ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed);
-
-	return retval;
-}
-
 int pciehp_get_max_lnk_width(struct slot *slot,
 				 enum pcie_link_width *value)
 {
@@ -691,38 +669,6 @@
 	return retval;
 }
 
-int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value)
-{
-	struct controller *ctrl = slot->ctrl;
-	enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN;
-	int retval = 0;
-	u16 lnk_status;
-
-	retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
-	if (retval) {
-		ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
-			 __func__);
-		return retval;
-	}
-
-	switch (lnk_status & PCI_EXP_LNKSTA_CLS) {
-	case 1:
-		lnk_speed = PCIE_2_5GB;
-		break;
-	case 2:
-		lnk_speed = PCIE_5_0GB;
-		break;
-	default:
-		lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
-		break;
-	}
-
-	*value = lnk_speed;
-	ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed);
-
-	return retval;
-}
-
 int pciehp_get_cur_lnk_width(struct slot *slot,
 				 enum pcie_link_width *value)
 {
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 2173310..0a16444 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -53,17 +53,15 @@
 		busnr = pci_scan_bridge(parent, dev, busnr, pass);
 	if (!dev->subordinate)
 		return -1;
-	pci_bus_size_bridges(dev->subordinate);
-	pci_bus_assign_resources(parent);
-	pci_enable_bridges(parent);
-	pci_bus_add_devices(parent);
+
 	return 0;
 }
 
 int pciehp_configure_device(struct slot *p_slot)
 {
 	struct pci_dev *dev;
-	struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
+	struct pci_dev *bridge = p_slot->ctrl->pcie->port;
+	struct pci_bus *parent = bridge->subordinate;
 	int num, fn;
 	struct controller *ctrl = p_slot->ctrl;
 
@@ -96,12 +94,25 @@
 				(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
 			pciehp_add_bridge(dev);
 		}
+		pci_dev_put(dev);
+	}
+
+	pci_assign_unassigned_bridge_resources(bridge);
+
+	for (fn = 0; fn < 8; fn++) {
+		dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
+		if (!dev)
+			continue;
+		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+			pci_dev_put(dev);
+			continue;
+		}
 		pci_configure_slot(dev);
 		pci_dev_put(dev);
 	}
 
-	pci_bus_assign_resources(parent);
 	pci_bus_add_devices(parent);
+
 	return 0;
 }
 
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index c159223..dcaae72 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -130,10 +130,9 @@
 	return 0;
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
+static enum pci_bus_speed get_max_bus_speed(struct slot *slot)
 {
-	struct slot *slot = (struct slot *)hotplug_slot->private;
-
+	enum pci_bus_speed speed;
 	switch (slot->type) {
 	case 1:
 	case 2:
@@ -141,30 +140,30 @@
 	case 4:
 	case 5:
 	case 6:
-		*value = PCI_SPEED_33MHz;	/* speed for case 1-6 */
+		speed = PCI_SPEED_33MHz;	/* speed for case 1-6 */
 		break;
 	case 7:
 	case 8:
-		*value = PCI_SPEED_66MHz;
+		speed = PCI_SPEED_66MHz;
 		break;
 	case 11:
 	case 14:
-		*value = PCI_SPEED_66MHz_PCIX;
+		speed = PCI_SPEED_66MHz_PCIX;
 		break;
 	case 12:
 	case 15:
-		*value = PCI_SPEED_100MHz_PCIX;
+		speed = PCI_SPEED_100MHz_PCIX;
 		break;
 	case 13:
 	case 16:
-		*value = PCI_SPEED_133MHz_PCIX;
+		speed = PCI_SPEED_133MHz_PCIX;
 		break;
 	default:
-		*value = PCI_SPEED_UNKNOWN;
+		speed = PCI_SPEED_UNKNOWN;
 		break;
-
 	}
-	return 0;
+
+	return speed;
 }
 
 static int get_children_props(struct device_node *dn, const int **drc_indexes,
@@ -408,6 +407,8 @@
 		slot->state = NOT_VALID;
 		return -EINVAL;
 	}
+
+	slot->bus->max_bus_speed = get_max_bus_speed(slot);
 	return 0;
 }
 
@@ -429,7 +430,6 @@
 	.get_power_status = get_power_status,
 	.get_attention_status = get_attention_status,
 	.get_adapter_status = get_adapter_status,
-	.get_max_bus_speed = get_max_bus_speed,
 };
 
 module_init(rpaphp_init);
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 8e210cd7..d2627e1 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -333,8 +333,6 @@
 	int (*set_attention_status)(struct slot *slot, u8 status);
 	int (*get_latch_status)(struct slot *slot, u8 *status);
 	int (*get_adapter_status)(struct slot *slot, u8 *status);
-	int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
-	int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed);
 	int (*get_mode1_ECC_cap)(struct slot *slot, u8 *mode);
 	int (*get_prog_int)(struct slot *slot, u8 *prog_int);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 8a520a3..a506229 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -65,8 +65,6 @@
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 
 static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
 	.set_attention_status =	set_attention_status,
@@ -76,8 +74,6 @@
 	.get_attention_status =	get_attention_status,
 	.get_latch_status =	get_latch_status,
 	.get_adapter_status =	get_adapter_status,
-	.get_max_bus_speed =	get_max_bus_speed,
-	.get_cur_bus_speed =	get_cur_bus_speed,
 };
 
 /**
@@ -279,37 +275,6 @@
 	return 0;
 }
 
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
-				enum pci_bus_speed *value)
-{
-	struct slot *slot = get_slot(hotplug_slot);
-	int retval;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	retval = slot->hpc_ops->get_max_bus_speed(slot, value);
-	if (retval < 0)
-		*value = PCI_SPEED_UNKNOWN;
-
-	return 0;
-}
-
-static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value)
-{
-	struct slot *slot = get_slot(hotplug_slot);
-	int retval;
-
-	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
-		 __func__, slot_name(slot));
-
-	retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
-	if (retval < 0)
-		*value = PCI_SPEED_UNKNOWN;
-
-	return 0;
-}
-
 static int is_shpc_capable(struct pci_dev *dev)
 {
 	if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index b8ab279..3bba0c0 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -285,17 +285,8 @@
 		return WRONG_BUS_FREQUENCY;
 	}
 
-	rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
-	if (rc) {
-		ctrl_err(ctrl, "Can't get bus operation speed\n");
-		return WRONG_BUS_FREQUENCY;
-	}
-
-	rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
-	if (rc) {
-		ctrl_err(ctrl, "Can't get max bus operation speed\n");
-		msp = bsp;
-	}
+	bsp = ctrl->pci_dev->bus->cur_bus_speed;
+	msp = ctrl->pci_dev->bus->max_bus_speed;
 
 	/* Check if there are other slots or devices on the same bus */
 	if (!list_empty(&ctrl->pci_dev->subordinate->devices))
@@ -462,6 +453,7 @@
 		p_slot->state = POWERON_STATE;
 		break;
 	default:
+		kfree(info);
 		goto out;
 	}
 	queue_work(shpchp_wq, &info->work);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 86dc398..5f5e8d2 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -660,6 +660,75 @@
 	return retval;
 }
 
+static int shpc_get_cur_bus_speed(struct controller *ctrl)
+{
+	int retval = 0;
+	struct pci_bus *bus = ctrl->pci_dev->subordinate;
+	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+	u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
+	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
+	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
+
+	if ((pi == 1) && (speed_mode > 4)) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	switch (speed_mode) {
+	case 0x0:
+		bus_speed = PCI_SPEED_33MHz;
+		break;
+	case 0x1:
+		bus_speed = PCI_SPEED_66MHz;
+		break;
+	case 0x2:
+		bus_speed = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 0x3:
+		bus_speed = PCI_SPEED_100MHz_PCIX;
+		break;
+	case 0x4:
+		bus_speed = PCI_SPEED_133MHz_PCIX;
+		break;
+	case 0x5:
+		bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
+		break;
+	case 0x6:
+		bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
+		break;
+	case 0x7:
+		bus_speed = PCI_SPEED_133MHz_PCIX_ECC;
+		break;
+	case 0x8:
+		bus_speed = PCI_SPEED_66MHz_PCIX_266;
+		break;
+	case 0x9:
+		bus_speed = PCI_SPEED_100MHz_PCIX_266;
+		break;
+	case 0xa:
+		bus_speed = PCI_SPEED_133MHz_PCIX_266;
+		break;
+	case 0xb:
+		bus_speed = PCI_SPEED_66MHz_PCIX_533;
+		break;
+	case 0xc:
+		bus_speed = PCI_SPEED_100MHz_PCIX_533;
+		break;
+	case 0xd:
+		bus_speed = PCI_SPEED_133MHz_PCIX_533;
+		break;
+	default:
+		retval = -ENODEV;
+		break;
+	}
+
+ out:
+	bus->cur_bus_speed = bus_speed;
+	dbg("Current bus speed = %d\n", bus_speed);
+	return retval;
+}
+
+
 static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 {
 	int retval;
@@ -720,6 +789,8 @@
 	retval = shpc_write_cmd(slot, 0, cmd);
 	if (retval)
 		ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
+	else
+		shpc_get_cur_bus_speed(ctrl);
 
 	return retval;
 }
@@ -803,10 +874,10 @@
 	return IRQ_HANDLED;
 }
 
-static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
+static int shpc_get_max_bus_speed(struct controller *ctrl)
 {
 	int retval = 0;
-	struct controller *ctrl = slot->ctrl;
+	struct pci_bus *bus = ctrl->pci_dev->subordinate;
 	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
 	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
 	u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
@@ -842,79 +913,12 @@
 			retval = -ENODEV;
 	}
 
-	*value = bus_speed;
+	bus->max_bus_speed = bus_speed;
 	ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed);
 
 	return retval;
 }
 
-static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
-{
-	int retval = 0;
-	struct controller *ctrl = slot->ctrl;
-	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
-	u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
-	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
-	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
-
-	if ((pi == 1) && (speed_mode > 4)) {
-		*value = PCI_SPEED_UNKNOWN;
-		return -ENODEV;
-	}
-
-	switch (speed_mode) {
-	case 0x0:
-		*value = PCI_SPEED_33MHz;
-		break;
-	case 0x1:
-		*value = PCI_SPEED_66MHz;
-		break;
-	case 0x2:
-		*value = PCI_SPEED_66MHz_PCIX;
-		break;
-	case 0x3:
-		*value = PCI_SPEED_100MHz_PCIX;
-		break;
-	case 0x4:
-		*value = PCI_SPEED_133MHz_PCIX;
-		break;
-	case 0x5:
-		*value = PCI_SPEED_66MHz_PCIX_ECC;
-		break;
-	case 0x6:
-		*value = PCI_SPEED_100MHz_PCIX_ECC;
-		break;
-	case 0x7:
-		*value = PCI_SPEED_133MHz_PCIX_ECC;
-		break;
-	case 0x8:
-		*value = PCI_SPEED_66MHz_PCIX_266;
-		break;
-	case 0x9:
-		*value = PCI_SPEED_100MHz_PCIX_266;
-		break;
-	case 0xa:
-		*value = PCI_SPEED_133MHz_PCIX_266;
-		break;
-	case 0xb:
-		*value = PCI_SPEED_66MHz_PCIX_533;
-		break;
-	case 0xc:
-		*value = PCI_SPEED_100MHz_PCIX_533;
-		break;
-	case 0xd:
-		*value = PCI_SPEED_133MHz_PCIX_533;
-		break;
-	default:
-		*value = PCI_SPEED_UNKNOWN;
-		retval = -ENODEV;
-		break;
-	}
-
-	ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed);
-	return retval;
-}
-
 static struct hpc_ops shpchp_hpc_ops = {
 	.power_on_slot			= hpc_power_on_slot,
 	.slot_enable			= hpc_slot_enable,
@@ -926,8 +930,6 @@
 	.get_latch_status		= hpc_get_latch_status,
 	.get_adapter_status		= hpc_get_adapter_status,
 
-	.get_max_bus_speed		= hpc_get_max_bus_speed,
-	.get_cur_bus_speed		= hpc_get_cur_bus_speed,
 	.get_adapter_speed		= hpc_get_adapter_speed,
 	.get_mode1_ECC_cap		= hpc_get_mode1_ECC_cap,
 	.get_prog_int			= hpc_get_prog_int,
@@ -1086,6 +1088,9 @@
 	}
 	ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
 
+	shpc_get_max_bus_speed(ctrl);
+	shpc_get_cur_bus_speed(ctrl);
+
 	/*
 	 * If this is the first controller to be initialized,
 	 * initialize the shpchpd work queue
diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c
index 29fa9d2..071b7dc 100644
--- a/drivers/pci/hotplug/shpchp_sysfs.c
+++ b/drivers/pci/hotplug/shpchp_sysfs.c
@@ -47,8 +47,7 @@
 	bus = pdev->subordinate;
 
 	out += sprintf(buf, "Free resources: memory\n");
-	for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
-		res = bus->resource[index];
+	pci_bus_for_each_resource(bus, res, index) {
 		if (res && (res->flags & IORESOURCE_MEM) &&
 				!(res->flags & IORESOURCE_PREFETCH)) {
 			out += sprintf(out, "start = %8.8llx, "
@@ -58,8 +57,7 @@
 		}
 	}
 	out += sprintf(out, "Free resources: prefetchable memory\n");
-	for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
-		res = bus->resource[index];
+	pci_bus_for_each_resource(bus, res, index) {
 		if (res && (res->flags & IORESOURCE_MEM) &&
 			       (res->flags & IORESOURCE_PREFETCH)) {
 			out += sprintf(out, "start = %8.8llx, "
@@ -69,8 +67,7 @@
 		}
 	}
 	out += sprintf(out, "Free resources: IO\n");
-	for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
-		res = bus->resource[index];
+	pci_bus_for_each_resource(bus, res, index) {
 		if (res && (res->flags & IORESOURCE_IO)) {
 			out += sprintf(out, "start = %8.8llx, "
 					"length = %8.8llx\n",
diff --git a/drivers/pci/legacy.c b/drivers/pci/legacy.c
deleted file mode 100644
index 871f65c..0000000
--- a/drivers/pci/legacy.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include "pci.h"
-
-/**
- * pci_find_device - begin or continue searching for a PCI device by vendor/device id
- * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
- * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
- * @from: Previous PCI device found in search, or %NULL for new search.
- *
- * Iterates through the list of known PCI devices.  If a PCI device is found
- * with a matching @vendor and @device, a pointer to its device structure is
- * returned.  Otherwise, %NULL is returned.
- * A new search is initiated by passing %NULL as the @from argument.
- * Otherwise if @from is not %NULL, searches continue from next device
- * on the global list.
- *
- * NOTE: Do not use this function any more; use pci_get_device() instead, as
- * the PCI device returned by this function can disappear at any moment in
- * time.
- */
-struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device,
-				struct pci_dev *from)
-{
-	struct pci_dev *pdev;
-
-	pci_dev_get(from);
-	pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
-	pci_dev_put(pdev);
-	return pdev;
-}
-EXPORT_SYMBOL(pci_find_device);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 7e28295..c0c7391 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -16,8 +16,144 @@
 #include <acpi/acpi_bus.h>
 
 #include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
 #include "pci.h"
 
+static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
+
+/**
+ * pci_acpi_wake_bus - Wake-up notification handler for root buses.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI root bus to wake up devices on.
+ */
+static void pci_acpi_wake_bus(acpi_handle handle, u32 event, void *context)
+{
+	struct pci_bus *pci_bus = context;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_bus)
+		pci_pme_wakeup_bus(pci_bus);
+}
+
+/**
+ * pci_acpi_wake_dev - Wake-up notification handler for PCI devices.
+ * @handle: ACPI handle of a device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: PCI device object to wake up.
+ */
+static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
+{
+	struct pci_dev *pci_dev = context;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
+		pci_check_pme_status(pci_dev);
+		pm_runtime_resume(&pci_dev->dev);
+		if (pci_dev->subordinate)
+			pci_pme_wakeup_bus(pci_dev->subordinate);
+	}
+}
+
+/**
+ * add_pm_notifier - Register PM notifier for given ACPI device.
+ * @dev: ACPI device to add the notifier for.
+ * @context: PCI device or bus to check for PME status if an event is signaled.
+ *
+ * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
+ * PM wake-up events.  For example, wake-up events may be generated for bridges
+ * if one of the devices below the bridge is signaling PME, even if the bridge
+ * itself doesn't have a wake-up GPE associated with it.
+ */
+static acpi_status add_pm_notifier(struct acpi_device *dev,
+				   acpi_notify_handler handler,
+				   void *context)
+{
+	acpi_status status = AE_ALREADY_EXISTS;
+
+	mutex_lock(&pci_acpi_pm_notify_mtx);
+
+	if (dev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_install_notify_handler(dev->handle,
+					     ACPI_SYSTEM_NOTIFY,
+					     handler, context);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	dev->wakeup.flags.notifier_present = true;
+
+ out:
+	mutex_unlock(&pci_acpi_pm_notify_mtx);
+	return status;
+}
+
+/**
+ * remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @dev: ACPI device to remove the notifier from.
+ */
+static acpi_status remove_pm_notifier(struct acpi_device *dev,
+				      acpi_notify_handler handler)
+{
+	acpi_status status = AE_BAD_PARAMETER;
+
+	mutex_lock(&pci_acpi_pm_notify_mtx);
+
+	if (!dev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_remove_notify_handler(dev->handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    handler);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	dev->wakeup.flags.notifier_present = false;
+
+ out:
+	mutex_unlock(&pci_acpi_pm_notify_mtx);
+	return status;
+}
+
+/**
+ * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_bus: PCI bus to walk checking for PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
+					 struct pci_bus *pci_bus)
+{
+	return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+}
+
+/**
+ * pci_acpi_remove_bus_pm_notifier - Unregister PCI bus PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
+{
+	return remove_pm_notifier(dev, pci_acpi_wake_bus);
+}
+
+/**
+ * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device.
+ * @dev: ACPI device to add the notifier for.
+ * @pci_dev: PCI device to check for the PME status if an event is signaled.
+ */
+acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
+				     struct pci_dev *pci_dev)
+{
+	return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+}
+
+/**
+ * pci_acpi_remove_pm_notifier - Unregister PCI device PM notifier.
+ * @dev: ACPI device to remove the notifier from.
+ */
+acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
+{
+	return remove_pm_notifier(dev, pci_acpi_wake_dev);
+}
+
 /*
  * _SxD returns the D-state with the highest power
  * (lowest D-state number) supported in the S-state "x".
@@ -131,12 +267,87 @@
 	return 0;
 }
 
+/**
+ * acpi_dev_run_wake - Enable/disable wake-up for given device.
+ * @phys_dev: Device to enable/disable the platform to wake-up the system for.
+ * @enable: Whether enable or disable the wake-up functionality.
+ *
+ * Find the ACPI device object corresponding to @pci_dev and try to
+ * enable/disable the GPE associated with it.
+ */
+static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
+{
+	struct acpi_device *dev;
+	acpi_handle handle;
+	int error = -ENODEV;
+
+	if (!device_run_wake(phys_dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(phys_dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
+		dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	if (enable) {
+		if (!dev->wakeup.run_wake_count++) {
+			acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
+			acpi_enable_gpe(dev->wakeup.gpe_device,
+					dev->wakeup.gpe_number,
+					ACPI_GPE_TYPE_RUNTIME);
+		}
+	} else if (dev->wakeup.run_wake_count > 0) {
+		if (!--dev->wakeup.run_wake_count) {
+			acpi_disable_gpe(dev->wakeup.gpe_device,
+					 dev->wakeup.gpe_number,
+					 ACPI_GPE_TYPE_RUNTIME);
+			acpi_disable_wakeup_device_power(dev);
+		}
+	} else {
+		error = -EALREADY;
+	}
+
+	return error;
+}
+
+static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
+{
+	while (bus->parent) {
+		struct pci_dev *bridge = bus->self;
+
+		if (bridge->pme_interrupt)
+			return;
+		if (!acpi_dev_run_wake(&bridge->dev, enable))
+			return;
+		bus = bus->parent;
+	}
+
+	/* We have reached the root bus. */
+	if (bus->bridge)
+		acpi_dev_run_wake(bus->bridge, enable);
+}
+
+static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
+{
+	if (dev->pme_interrupt)
+		return 0;
+
+	if (!acpi_dev_run_wake(&dev->dev, enable))
+		return 0;
+
+	acpi_pci_propagate_run_wake(dev->bus, enable);
+	return 0;
+}
+
 static struct pci_platform_pm_ops acpi_pci_platform_pm = {
 	.is_manageable = acpi_pci_power_manageable,
 	.set_state = acpi_pci_set_power_state,
 	.choose_state = acpi_pci_choose_state,
 	.can_wakeup = acpi_pci_can_wakeup,
 	.sleep_wake = acpi_pci_sleep_wake,
+	.run_wake = acpi_pci_run_wake,
 };
 
 /* ACPI bus type */
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index e5d47be..f9a0aec 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/cpu.h>
+#include <linux/pm_runtime.h>
 #include "pci.h"
 
 struct pci_dynid {
@@ -404,6 +405,35 @@
 	pci_msix_shutdown(pci_dev);
 }
 
+#ifdef CONFIG_PM_OPS
+
+/* Auxiliary functions used for system resume and run-time resume. */
+
+/**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @pci_dev: PCI device to handle
+ */
+static int pci_restore_standard_config(struct pci_dev *pci_dev)
+{
+	pci_update_current_state(pci_dev, PCI_UNKNOWN);
+
+	if (pci_dev->current_state != PCI_D0) {
+		int error = pci_set_power_state(pci_dev, PCI_D0);
+		if (error)
+			return error;
+	}
+
+	return pci_restore_state(pci_dev);
+}
+
+static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
+{
+	pci_restore_standard_config(pci_dev);
+	pci_fixup_device(pci_fixup_resume_early, pci_dev);
+}
+
+#endif
+
 #ifdef CONFIG_PM_SLEEP
 
 /*
@@ -520,29 +550,6 @@
 
 /* Auxiliary functions used by the new power management framework */
 
-/**
- * pci_restore_standard_config - restore standard config registers of PCI device
- * @pci_dev: PCI device to handle
- */
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
-	pci_update_current_state(pci_dev, PCI_UNKNOWN);
-
-	if (pci_dev->current_state != PCI_D0) {
-		int error = pci_set_power_state(pci_dev, PCI_D0);
-		if (error)
-			return error;
-	}
-
-	return pci_restore_state(pci_dev);
-}
-
-static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
-{
-	pci_restore_standard_config(pci_dev);
-	pci_fixup_device(pci_fixup_resume_early, pci_dev);
-}
-
 static void pci_pm_default_resume(struct pci_dev *pci_dev)
 {
 	pci_fixup_device(pci_fixup_resume, pci_dev);
@@ -581,6 +588,17 @@
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	/*
+	 * PCI devices suspended at run time need to be resumed at this
+	 * point, because in general it is necessary to reconfigure them for
+	 * system suspend.  Namely, if the device is supposed to wake up the
+	 * system from the sleep state, we may need to reconfigure it for this
+	 * purpose.  In turn, if the device is not supposed to wake up the
+	 * system from the sleep state, we'll have to prevent it from signaling
+	 * wake-up.
+	 */
+	pm_runtime_resume(dev);
+
 	if (drv && drv->pm && drv->pm->prepare)
 		error = drv->pm->prepare(dev);
 
@@ -595,6 +613,13 @@
 		drv->pm->complete(dev);
 }
 
+#else /* !CONFIG_PM_SLEEP */
+
+#define pci_pm_prepare	NULL
+#define pci_pm_complete	NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
 #ifdef CONFIG_SUSPEND
 
 static int pci_pm_suspend(struct device *dev)
@@ -681,7 +706,7 @@
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
-	pci_pm_default_resume_noirq(pci_dev);
+	pci_pm_default_resume_early(pci_dev);
 
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
@@ -879,7 +904,7 @@
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
-	pci_pm_default_resume_noirq(pci_dev);
+	pci_pm_default_resume_early(pci_dev);
 
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
@@ -931,6 +956,84 @@
 
 #endif /* !CONFIG_HIBERNATION */
 
+#ifdef CONFIG_PM_RUNTIME
+
+static int pci_pm_runtime_suspend(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	pci_power_t prev = pci_dev->current_state;
+	int error;
+
+	if (!pm || !pm->runtime_suspend)
+		return -ENOSYS;
+
+	error = pm->runtime_suspend(dev);
+	suspend_report_result(pm->runtime_suspend, error);
+	if (error)
+		return error;
+
+	pci_fixup_device(pci_fixup_suspend, pci_dev);
+
+	if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
+	    && pci_dev->current_state != PCI_UNKNOWN) {
+		WARN_ONCE(pci_dev->current_state != prev,
+			"PCI PM: State of device not saved by %pF\n",
+			pm->runtime_suspend);
+		return 0;
+	}
+
+	if (!pci_dev->state_saved)
+		pci_save_state(pci_dev);
+
+	pci_finish_runtime_suspend(pci_dev);
+
+	return 0;
+}
+
+static int pci_pm_runtime_resume(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (!pm || !pm->runtime_resume)
+		return -ENOSYS;
+
+	pci_pm_default_resume_early(pci_dev);
+	__pci_enable_wake(pci_dev, PCI_D0, true, false);
+	pci_fixup_device(pci_fixup_resume, pci_dev);
+
+	return pm->runtime_resume(dev);
+}
+
+static int pci_pm_runtime_idle(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (!pm)
+		return -ENOSYS;
+
+	if (pm->runtime_idle) {
+		int ret = pm->runtime_idle(dev);
+		if (ret)
+			return ret;
+	}
+
+	pm_runtime_suspend(dev);
+
+	return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+#define pci_pm_runtime_suspend	NULL
+#define pci_pm_runtime_resume	NULL
+#define pci_pm_runtime_idle	NULL
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_OPS
+
 const struct dev_pm_ops pci_dev_pm_ops = {
 	.prepare = pci_pm_prepare,
 	.complete = pci_pm_complete,
@@ -946,15 +1049,18 @@
 	.thaw_noirq = pci_pm_thaw_noirq,
 	.poweroff_noirq = pci_pm_poweroff_noirq,
 	.restore_noirq = pci_pm_restore_noirq,
+	.runtime_suspend = pci_pm_runtime_suspend,
+	.runtime_resume = pci_pm_runtime_resume,
+	.runtime_idle = pci_pm_runtime_idle,
 };
 
 #define PCI_PM_OPS_PTR	(&pci_dev_pm_ops)
 
-#else /* !CONFIG_PM_SLEEP */
+#else /* !COMFIG_PM_OPS */
 
 #define PCI_PM_OPS_PTR	NULL
 
-#endif /* !CONFIG_PM_SLEEP */
+#endif /* !COMFIG_PM_OPS */
 
 /**
  * __pci_register_driver - register a new pci driver
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 315fea4..f4a2738 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -19,8 +19,8 @@
 #include <linux/pci-aspm.h>
 #include <linux/pm_wakeup.h>
 #include <linux/interrupt.h>
-#include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include <linux/device.h>
+#include <linux/pm_runtime.h>
 #include <asm/setup.h>
 #include "pci.h"
 
@@ -29,6 +29,12 @@
 };
 EXPORT_SYMBOL_GPL(pci_power_names);
 
+int isa_dma_bridge_buggy;
+EXPORT_SYMBOL(isa_dma_bridge_buggy);
+
+int pci_pci_problems;
+EXPORT_SYMBOL(pci_pci_problems);
+
 unsigned int pci_pm_d3_delay;
 
 static void pci_dev_d3_sleep(struct pci_dev *dev)
@@ -380,10 +386,9 @@
 {
 	const struct pci_bus *bus = dev->bus;
 	int i;
-	struct resource *best = NULL;
+	struct resource *best = NULL, *r;
 
-	for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		struct resource *r = bus->resource[i];
+	pci_bus_for_each_resource(bus, r, i) {
 		if (!r)
 			continue;
 		if (res->start && !(res->start >= r->start && res->end <= r->end))
@@ -457,6 +462,12 @@
 			pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
 }
 
+static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable)
+{
+	return pci_platform_pm ?
+			pci_platform_pm->run_wake(dev, enable) : -ENODEV;
+}
+
 /**
  * pci_raw_set_power_state - Use PCI PM registers to set the power state of
  *                           given PCI device
@@ -1190,6 +1201,66 @@
 }
 
 /**
+ * pci_check_pme_status - Check if given device has generated PME.
+ * @dev: Device to check.
+ *
+ * Check the PME status of the device and if set, clear it and clear PME enable
+ * (if set).  Return 'true' if PME status and PME enable were both set or
+ * 'false' otherwise.
+ */
+bool pci_check_pme_status(struct pci_dev *dev)
+{
+	int pmcsr_pos;
+	u16 pmcsr;
+	bool ret = false;
+
+	if (!dev->pm_cap)
+		return false;
+
+	pmcsr_pos = dev->pm_cap + PCI_PM_CTRL;
+	pci_read_config_word(dev, pmcsr_pos, &pmcsr);
+	if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
+		return false;
+
+	/* Clear PME status. */
+	pmcsr |= PCI_PM_CTRL_PME_STATUS;
+	if (pmcsr & PCI_PM_CTRL_PME_ENABLE) {
+		/* Disable PME to avoid interrupt flood. */
+		pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+		ret = true;
+	}
+
+	pci_write_config_word(dev, pmcsr_pos, pmcsr);
+
+	return ret;
+}
+
+/**
+ * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
+ * @dev: Device to handle.
+ * @ign: Ignored.
+ *
+ * Check if @dev has generated PME and queue a resume request for it in that
+ * case.
+ */
+static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
+{
+	if (pci_check_pme_status(dev))
+		pm_request_resume(&dev->dev);
+	return 0;
+}
+
+/**
+ * pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary.
+ * @bus: Top bus of the subtree to walk.
+ */
+void pci_pme_wakeup_bus(struct pci_bus *bus)
+{
+	if (bus)
+		pci_walk_bus(bus, pci_pme_wakeup, NULL);
+}
+
+/**
  * pci_pme_capable - check the capability of PCI device to generate PME#
  * @dev: PCI device to handle.
  * @state: PCI state from which device will issue PME#.
@@ -1230,9 +1301,10 @@
 }
 
 /**
- * pci_enable_wake - enable PCI device as wakeup event source
+ * __pci_enable_wake - enable PCI device as wakeup event source
  * @dev: PCI device affected
  * @state: PCI state from which device will issue wakeup events
+ * @runtime: True if the events are to be generated at run time
  * @enable: True to enable event generation; false to disable
  *
  * This enables the device as a wakeup event source, or disables it.
@@ -1248,11 +1320,12 @@
  * Error code depending on the platform is returned if both the platform and
  * the native mechanism fail to enable the generation of wake-up events
  */
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
+int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+		      bool runtime, bool enable)
 {
 	int ret = 0;
 
-	if (enable && !device_may_wakeup(&dev->dev))
+	if (enable && !runtime && !device_may_wakeup(&dev->dev))
 		return -EINVAL;
 
 	/* Don't do the same thing twice in a row for one device. */
@@ -1272,19 +1345,24 @@
 			pci_pme_active(dev, true);
 		else
 			ret = 1;
-		error = platform_pci_sleep_wake(dev, true);
+		error = runtime ? platform_pci_run_wake(dev, true) :
+					platform_pci_sleep_wake(dev, true);
 		if (ret)
 			ret = error;
 		if (!ret)
 			dev->wakeup_prepared = true;
 	} else {
-		platform_pci_sleep_wake(dev, false);
+		if (runtime)
+			platform_pci_run_wake(dev, false);
+		else
+			platform_pci_sleep_wake(dev, false);
 		pci_pme_active(dev, false);
 		dev->wakeup_prepared = false;
 	}
 
 	return ret;
 }
+EXPORT_SYMBOL(__pci_enable_wake);
 
 /**
  * pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold
@@ -1394,6 +1472,66 @@
 }
 
 /**
+ * pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend.
+ * @dev: PCI device being suspended.
+ *
+ * Prepare @dev to generate wake-up events at run time and put it into a low
+ * power state.
+ */
+int pci_finish_runtime_suspend(struct pci_dev *dev)
+{
+	pci_power_t target_state = pci_target_state(dev);
+	int error;
+
+	if (target_state == PCI_POWER_ERROR)
+		return -EIO;
+
+	__pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
+
+	error = pci_set_power_state(dev, target_state);
+
+	if (error)
+		__pci_enable_wake(dev, target_state, true, false);
+
+	return error;
+}
+
+/**
+ * pci_dev_run_wake - Check if device can generate run-time wake-up events.
+ * @dev: Device to check.
+ *
+ * Return true if the device itself is cabable of generating wake-up events
+ * (through the platform or using the native PCIe PME) or if the device supports
+ * PME and one of its upstream bridges can generate wake-up events.
+ */
+bool pci_dev_run_wake(struct pci_dev *dev)
+{
+	struct pci_bus *bus = dev->bus;
+
+	if (device_run_wake(&dev->dev))
+		return true;
+
+	if (!dev->pme_support)
+		return false;
+
+	while (bus->parent) {
+		struct pci_dev *bridge = bus->self;
+
+		if (device_run_wake(&bridge->dev))
+			return true;
+
+		bus = bus->parent;
+	}
+
+	/* We have reached the root bus. */
+	if (bus->bridge)
+		return device_run_wake(bus->bridge);
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(pci_dev_run_wake);
+
+/**
  * pci_pm_init - Initialize PM functions of given PCI device
  * @dev: PCI device to handle.
  */
@@ -2871,7 +3009,6 @@
 EXPORT_SYMBOL(pci_restore_state);
 EXPORT_SYMBOL(pci_pme_capable);
 EXPORT_SYMBOL(pci_pme_active);
-EXPORT_SYMBOL(pci_enable_wake);
 EXPORT_SYMBOL(pci_wake_from_d3);
 EXPORT_SYMBOL(pci_target_state);
 EXPORT_SYMBOL(pci_prepare_to_sleep);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index fbd0e3a..4eb10f4 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -35,6 +35,10 @@
  *
  * @sleep_wake: enables/disables the system wake up capability of given device
  *
+ * @run_wake: enables/disables the platform to generate run-time wake-up events
+ *		for given device (the device's wake-up capability has to be
+ *		enabled by @sleep_wake for this feature to work)
+ *
  * If given platform is generally capable of power managing PCI devices, all of
  * these callbacks are mandatory.
  */
@@ -44,11 +48,16 @@
 	pci_power_t (*choose_state)(struct pci_dev *dev);
 	bool (*can_wakeup)(struct pci_dev *dev);
 	int (*sleep_wake)(struct pci_dev *dev, bool enable);
+	int (*run_wake)(struct pci_dev *dev, bool enable);
 };
 
 extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
 extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
 extern void pci_disable_enabled_device(struct pci_dev *dev);
+extern bool pci_check_pme_status(struct pci_dev *dev);
+extern int pci_finish_runtime_suspend(struct pci_dev *dev);
+extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
+extern void pci_pme_wakeup_bus(struct pci_bus *bus);
 extern void pci_pm_init(struct pci_dev *dev);
 extern void platform_pci_wakeup_init(struct pci_dev *dev);
 extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
@@ -319,6 +328,13 @@
 	int (*reset)(struct pci_dev *dev, int probe);
 };
 
+#ifdef CONFIG_PCI_QUIRKS
 extern int pci_dev_specific_reset(struct pci_dev *dev, int probe);
+#else
+static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+{
+	return -ENOTTY;
+}
+#endif
 
 #endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 5a0c6ad..b8b494b 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -46,3 +46,7 @@
 	help
 	  This enables PCI Express ASPM debug support. It will add per-device
 	  interface to control ASPM.
+
+config PCIE_PME
+	def_bool y
+	depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 11f6bb1e..ea65454 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -11,3 +11,5 @@
 
 # Build PCI Express AER if needed
 obj-$(CONFIG_PCIEAER)		+= aer/
+
+obj-$(CONFIG_PCIE_PME) += pme/
diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile
new file mode 100644
index 0000000..8b92380
--- /dev/null
+++ b/drivers/pci/pcie/pme/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for PCI-Express Root Port PME signaling driver
+#
+
+obj-$(CONFIG_PCIE_PME) += pmedriver.o
+
+pmedriver-objs := pcie_pme.o
+pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
new file mode 100644
index 0000000..7b3cbff
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -0,0 +1,505 @@
+/*
+ * PCIe Native PME support
+ *
+ * Copyright (C) 2007 - 2009 Intel Corp
+ * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/pcieport_if.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pm_runtime.h>
+
+#include "../../pci.h"
+#include "pcie_pme.h"
+
+#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
+
+/*
+ * If set, this switch will prevent the PCIe root port PME service driver from
+ * being registered.  Consequently, the interrupt-based PCIe PME signaling will
+ * not be used by any PCIe root ports in that case.
+ */
+static bool pcie_pme_disabled;
+
+/*
+ * The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
+ * "In order to maintain compatibility with non-PCI Express-aware system
+ * software, system power management logic must be configured by firmware to use
+ * the legacy mechanism of signaling PME by default.  PCI Express-aware system
+ * software must notify the firmware prior to enabling native, interrupt-based
+ * PME signaling."  However, if the platform doesn't provide us with a suitable
+ * notification mechanism or the notification fails, it is not clear whether or
+ * not we are supposed to use the interrupt-based PCIe PME signaling.  The
+ * switch below can be used to indicate the desired behaviour.  When set, it
+ * will make the kernel use the interrupt-based PCIe PME signaling regardless of
+ * the platform notification status, although the kernel will attempt to notify
+ * the platform anyway.  When unset, it will prevent the kernel from using the
+ * the interrupt-based PCIe PME signaling if the platform notification fails,
+ * which is the default.
+ */
+static bool pcie_pme_force_enable;
+
+/*
+ * If this switch is set, MSI will not be used for PCIe PME signaling.  This
+ * causes the PCIe port driver to use INTx interrupts only, but it turns out
+ * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
+ * wake-up from system sleep states.
+ */
+bool pcie_pme_msi_disabled;
+
+static int __init pcie_pme_setup(char *str)
+{
+	if (!strcmp(str, "off"))
+		pcie_pme_disabled = true;
+	else if (!strcmp(str, "force"))
+		pcie_pme_force_enable = true;
+	else if (!strcmp(str, "nomsi"))
+		pcie_pme_msi_disabled = true;
+	return 1;
+}
+__setup("pcie_pme=", pcie_pme_setup);
+
+/**
+ * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME.
+ * @srv: PCIe PME root port service to use for carrying out the check.
+ *
+ * Notify the platform that the native PCIe PME is going to be used and return
+ * 'true' if the control of the PCIe PME registers has been acquired from the
+ * platform.
+ */
+static bool pcie_pme_platform_setup(struct pcie_device *srv)
+{
+	if (!pcie_pme_platform_notify(srv))
+		return true;
+	return pcie_pme_force_enable;
+}
+
+struct pcie_pme_service_data {
+	spinlock_t lock;
+	struct pcie_device *srv;
+	struct work_struct work;
+	bool noirq; /* Don't enable the PME interrupt used by this service. */
+};
+
+/**
+ * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation.
+ * @dev: PCIe root port or event collector.
+ * @enable: Enable or disable the interrupt.
+ */
+static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
+{
+	int rtctl_pos;
+	u16 rtctl;
+
+	rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL;
+
+	pci_read_config_word(dev, rtctl_pos, &rtctl);
+	if (enable)
+		rtctl |= PCI_EXP_RTCTL_PMEIE;
+	else
+		rtctl &= ~PCI_EXP_RTCTL_PMEIE;
+	pci_write_config_word(dev, rtctl_pos, rtctl);
+}
+
+/**
+ * pcie_pme_clear_status - Clear root port PME interrupt status.
+ * @dev: PCIe root port or event collector.
+ */
+static void pcie_pme_clear_status(struct pci_dev *dev)
+{
+	int rtsta_pos;
+	u32 rtsta;
+
+	rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA;
+
+	pci_read_config_dword(dev, rtsta_pos, &rtsta);
+	rtsta |= PCI_EXP_RTSTA_PME;
+	pci_write_config_dword(dev, rtsta_pos, rtsta);
+}
+
+/**
+ * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#.
+ * @bus: PCI bus to scan.
+ *
+ * Scan given PCI bus and all buses under it for devices asserting PME#.
+ */
+static bool pcie_pme_walk_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	bool ret = false;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		/* Skip PCIe devices in case we started from a root port. */
+		if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
+			pm_request_resume(&dev->dev);
+			ret = true;
+		}
+
+		if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate))
+			ret = true;
+	}
+
+	return ret;
+}
+
+/**
+ * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME.
+ * @bus: Secondary bus of the bridge.
+ * @devfn: Device/function number to check.
+ *
+ * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band
+ * PCIe PME message.  In such that case the bridge should use the Requester ID
+ * of device/function number 0 on its secondary bus.
+ */
+static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn)
+{
+	struct pci_dev *dev;
+	bool found = false;
+
+	if (devfn)
+		return false;
+
+	dev = pci_dev_get(bus->self);
+	if (!dev)
+		return false;
+
+	if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
+		down_read(&pci_bus_sem);
+		if (pcie_pme_walk_bus(bus))
+			found = true;
+		up_read(&pci_bus_sem);
+	}
+
+	pci_dev_put(dev);
+	return found;
+}
+
+/**
+ * pcie_pme_handle_request - Find device that generated PME and handle it.
+ * @port: Root port or event collector that generated the PME interrupt.
+ * @req_id: PCIe Requester ID of the device that generated the PME.
+ */
+static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
+{
+	u8 busnr = req_id >> 8, devfn = req_id & 0xff;
+	struct pci_bus *bus;
+	struct pci_dev *dev;
+	bool found = false;
+
+	/* First, check if the PME is from the root port itself. */
+	if (port->devfn == devfn && port->bus->number == busnr) {
+		if (pci_check_pme_status(port)) {
+			pm_request_resume(&port->dev);
+			found = true;
+		} else {
+			/*
+			 * Apparently, the root port generated the PME on behalf
+			 * of a non-PCIe device downstream.  If this is done by
+			 * a root port, the Requester ID field in its status
+			 * register may contain either the root port's, or the
+			 * source device's information (PCI Express Base
+			 * Specification, Rev. 2.0, Section 6.1.9).
+			 */
+			down_read(&pci_bus_sem);
+			found = pcie_pme_walk_bus(port->subordinate);
+			up_read(&pci_bus_sem);
+		}
+		goto out;
+	}
+
+	/* Second, find the bus the source device is on. */
+	bus = pci_find_bus(pci_domain_nr(port->bus), busnr);
+	if (!bus)
+		goto out;
+
+	/* Next, check if the PME is from a PCIe-PCI bridge. */
+	found = pcie_pme_from_pci_bridge(bus, devfn);
+	if (found)
+		goto out;
+
+	/* Finally, try to find the PME source on the bus. */
+	down_read(&pci_bus_sem);
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_get(dev);
+		if (dev->devfn == devfn) {
+			found = true;
+			break;
+		}
+		pci_dev_put(dev);
+	}
+	up_read(&pci_bus_sem);
+
+	if (found) {
+		/* The device is there, but we have to check its PME status. */
+		found = pci_check_pme_status(dev);
+		if (found)
+			pm_request_resume(&dev->dev);
+		pci_dev_put(dev);
+	} else if (devfn) {
+		/*
+		 * The device is not there, but we can still try to recover by
+		 * assuming that the PME was reported by a PCIe-PCI bridge that
+		 * used devfn different from zero.
+		 */
+		dev_dbg(&port->dev, "PME interrupt generated for "
+			"non-existent device %02x:%02x.%d\n",
+			busnr, PCI_SLOT(devfn), PCI_FUNC(devfn));
+		found = pcie_pme_from_pci_bridge(bus, 0);
+	}
+
+ out:
+	if (!found)
+		dev_dbg(&port->dev, "Spurious native PME interrupt!\n");
+}
+
+/**
+ * pcie_pme_work_fn - Work handler for PCIe PME interrupt.
+ * @work: Work structure giving access to service data.
+ */
+static void pcie_pme_work_fn(struct work_struct *work)
+{
+	struct pcie_pme_service_data *data =
+			container_of(work, struct pcie_pme_service_data, work);
+	struct pci_dev *port = data->srv->port;
+	int rtsta_pos;
+	u32 rtsta;
+
+	rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+	spin_lock_irq(&data->lock);
+
+	for (;;) {
+		if (data->noirq)
+			break;
+
+		pci_read_config_dword(port, rtsta_pos, &rtsta);
+		if (rtsta & PCI_EXP_RTSTA_PME) {
+			/*
+			 * Clear PME status of the port.  If there are other
+			 * pending PMEs, the status will be set again.
+			 */
+			pcie_pme_clear_status(port);
+
+			spin_unlock_irq(&data->lock);
+			pcie_pme_handle_request(port, rtsta & 0xffff);
+			spin_lock_irq(&data->lock);
+
+			continue;
+		}
+
+		/* No need to loop if there are no more PMEs pending. */
+		if (!(rtsta & PCI_EXP_RTSTA_PENDING))
+			break;
+
+		spin_unlock_irq(&data->lock);
+		cpu_relax();
+		spin_lock_irq(&data->lock);
+	}
+
+	if (!data->noirq)
+		pcie_pme_interrupt_enable(port, true);
+
+	spin_unlock_irq(&data->lock);
+}
+
+/**
+ * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt.
+ * @irq: Interrupt vector.
+ * @context: Interrupt context pointer.
+ */
+static irqreturn_t pcie_pme_irq(int irq, void *context)
+{
+	struct pci_dev *port;
+	struct pcie_pme_service_data *data;
+	int rtsta_pos;
+	u32 rtsta;
+	unsigned long flags;
+
+	port = ((struct pcie_device *)context)->port;
+	data = get_service_data((struct pcie_device *)context);
+
+	rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA;
+
+	spin_lock_irqsave(&data->lock, flags);
+	pci_read_config_dword(port, rtsta_pos, &rtsta);
+
+	if (!(rtsta & PCI_EXP_RTSTA_PME)) {
+		spin_unlock_irqrestore(&data->lock, flags);
+		return IRQ_NONE;
+	}
+
+	pcie_pme_interrupt_enable(port, false);
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	/* We don't use pm_wq, because it's freezable. */
+	schedule_work(&data->work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * pcie_pme_set_native - Set the PME interrupt flag for given device.
+ * @dev: PCI device to handle.
+ * @ign: Ignored.
+ */
+static int pcie_pme_set_native(struct pci_dev *dev, void *ign)
+{
+	dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n");
+
+	device_set_run_wake(&dev->dev, true);
+	dev->pme_interrupt = true;
+	return 0;
+}
+
+/**
+ * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port.
+ * @port: PCIe root port or event collector to handle.
+ *
+ * For each device below given root port, including the port itself (or for each
+ * root complex integrated endpoint if @port is a root complex event collector)
+ * set the flag indicating that it can signal run-time wake-up events via PCIe
+ * PME interrupts.
+ */
+static void pcie_pme_mark_devices(struct pci_dev *port)
+{
+	pcie_pme_set_native(port, NULL);
+	if (port->subordinate) {
+		pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL);
+	} else {
+		struct pci_bus *bus = port->bus;
+		struct pci_dev *dev;
+
+		/* Check if this is a root port event collector. */
+		if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus)
+			return;
+
+		down_read(&pci_bus_sem);
+		list_for_each_entry(dev, &bus->devices, bus_list)
+			if (pci_is_pcie(dev)
+			    && dev->pcie_type == PCI_EXP_TYPE_RC_END)
+				pcie_pme_set_native(dev, NULL);
+		up_read(&pci_bus_sem);
+	}
+}
+
+/**
+ * pcie_pme_probe - Initialize PCIe PME service for given root port.
+ * @srv: PCIe service to initialize.
+ */
+static int pcie_pme_probe(struct pcie_device *srv)
+{
+	struct pci_dev *port;
+	struct pcie_pme_service_data *data;
+	int ret;
+
+	if (!pcie_pme_platform_setup(srv))
+		return -EACCES;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->lock);
+	INIT_WORK(&data->work, pcie_pme_work_fn);
+	data->srv = srv;
+	set_service_data(srv, data);
+
+	port = srv->port;
+	pcie_pme_interrupt_enable(port, false);
+	pcie_pme_clear_status(port);
+
+	ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv);
+	if (ret) {
+		kfree(data);
+	} else {
+		pcie_pme_mark_devices(port);
+		pcie_pme_interrupt_enable(port, true);
+	}
+
+	return ret;
+}
+
+/**
+ * pcie_pme_suspend - Suspend PCIe PME service device.
+ * @srv: PCIe service device to suspend.
+ */
+static int pcie_pme_suspend(struct pcie_device *srv)
+{
+	struct pcie_pme_service_data *data = get_service_data(srv);
+	struct pci_dev *port = srv->port;
+
+	spin_lock_irq(&data->lock);
+	pcie_pme_interrupt_enable(port, false);
+	pcie_pme_clear_status(port);
+	data->noirq = true;
+	spin_unlock_irq(&data->lock);
+
+	synchronize_irq(srv->irq);
+
+	return 0;
+}
+
+/**
+ * pcie_pme_resume - Resume PCIe PME service device.
+ * @srv - PCIe service device to resume.
+ */
+static int pcie_pme_resume(struct pcie_device *srv)
+{
+	struct pcie_pme_service_data *data = get_service_data(srv);
+	struct pci_dev *port = srv->port;
+
+	spin_lock_irq(&data->lock);
+	data->noirq = false;
+	pcie_pme_clear_status(port);
+	pcie_pme_interrupt_enable(port, true);
+	spin_unlock_irq(&data->lock);
+
+	return 0;
+}
+
+/**
+ * pcie_pme_remove - Prepare PCIe PME service device for removal.
+ * @srv - PCIe service device to resume.
+ */
+static void pcie_pme_remove(struct pcie_device *srv)
+{
+	pcie_pme_suspend(srv);
+	free_irq(srv->irq, srv);
+	kfree(get_service_data(srv));
+}
+
+static struct pcie_port_service_driver pcie_pme_driver = {
+	.name		= "pcie_pme",
+	.port_type 	= PCI_EXP_TYPE_ROOT_PORT,
+	.service 	= PCIE_PORT_SERVICE_PME,
+
+	.probe		= pcie_pme_probe,
+	.suspend	= pcie_pme_suspend,
+	.resume		= pcie_pme_resume,
+	.remove		= pcie_pme_remove,
+};
+
+/**
+ * pcie_pme_service_init - Register the PCIe PME service driver.
+ */
+static int __init pcie_pme_service_init(void)
+{
+	return pcie_pme_disabled ?
+		-ENODEV : pcie_port_service_register(&pcie_pme_driver);
+}
+
+module_init(pcie_pme_service_init);
diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h
new file mode 100644
index 0000000..b30d2b7
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme.h
@@ -0,0 +1,28 @@
+/*
+ * drivers/pci/pcie/pme/pcie_pme.h
+ *
+ * PCI Express Root Port PME signaling support
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ */
+
+#ifndef _PCIE_PME_H_
+#define _PCIE_PME_H_
+
+struct pcie_device;
+
+#ifdef CONFIG_ACPI
+extern int pcie_pme_acpi_setup(struct pcie_device *srv);
+
+static inline int pcie_pme_platform_notify(struct pcie_device *srv)
+{
+	return pcie_pme_acpi_setup(srv);
+}
+#else /* !CONFIG_ACPI */
+static inline int pcie_pme_platform_notify(struct pcie_device *srv)
+{
+	return 0;
+}
+#endif /* !CONFIG_ACPI */
+
+#endif
diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c
new file mode 100644
index 0000000..83ab228
--- /dev/null
+++ b/drivers/pci/pcie/pme/pcie_pme_acpi.c
@@ -0,0 +1,54 @@
+/*
+ * PCIe Native PME support, ACPI-related part
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pcieport_if.h>
+
+/**
+ * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME.
+ * @srv - PCIe PME service for a root port or event collector.
+ *
+ * Invoked when the PCIe bus type loads PCIe PME service driver.  To avoid
+ * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME
+ * control to the kernel.
+ */
+int pcie_pme_acpi_setup(struct pcie_device *srv)
+{
+	acpi_status status = AE_NOT_FOUND;
+	struct pci_dev *port = srv->port;
+	acpi_handle handle;
+	int error = 0;
+
+	if (acpi_pci_disabled)
+		return -ENOSYS;
+
+	dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n");
+
+	handle = acpi_find_root_bridge_handle(port);
+	if (!handle)
+		return -EINVAL;
+
+	status = acpi_pci_osc_control_set(handle,
+			OSC_PCI_EXPRESS_PME_CONTROL |
+			OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+	if (ACPI_FAILURE(status)) {
+		dev_info(&port->dev,
+			"Failed to receive control of PCIe PME service: %s\n",
+			(status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+			"no _OSC support" : "ACPI _OSC failed");
+		error = -ENODEV;
+	}
+
+	return error;
+}
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index aaeb9d2..813a5c3 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -30,4 +30,21 @@
 extern int __must_check pcie_port_bus_register(void);
 extern void pcie_port_bus_unregister(void);
 
+#ifdef CONFIG_PCIE_PME
+extern bool pcie_pme_msi_disabled;
+
+static inline void pcie_pme_disable_msi(void)
+{
+	pcie_pme_msi_disabled = true;
+}
+
+static inline bool pcie_pme_no_msi(void)
+{
+	return pcie_pme_msi_disabled;
+}
+#else /* !CONFIG_PCIE_PME */
+static inline void pcie_pme_disable_msi(void) {}
+static inline bool pcie_pme_no_msi(void) { return false; }
+#endif /* !CONFIG_PCIE_PME */
+
 #endif /* _PORTDRV_H_ */
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index b174188..0d34ff4 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -186,16 +186,24 @@
  */
 static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
 {
-	int i, irq;
+	int i, irq = -1;
+
+	/* We have to use INTx if MSI cannot be used for PCIe PME. */
+	if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) {
+		if (dev->pin)
+			irq = dev->irq;
+		goto no_msi;
+	}
 
 	/* Try to use MSI-X if supported */
 	if (!pcie_port_enable_msix(dev, irqs, mask))
 		return 0;
+
 	/* We're not going to use MSI-X, so try MSI and fall back to INTx */
-	irq = -1;
 	if (!pci_enable_msi(dev) || dev->pin)
 		irq = dev->irq;
 
+ no_msi:
 	for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
 		irqs[i] = irq;
 	irqs[PCIE_PORT_SERVICE_VC_SHIFT] = -1;
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 13c8972..127e8f1 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/pcieport_if.h>
 #include <linux/aer.h>
+#include <linux/dmi.h>
 
 #include "portdrv.h"
 #include "aer/aerdrv.h"
@@ -273,10 +274,36 @@
 	.driver.pm 	= PCIE_PORTDRV_PM_OPS,
 };
 
+static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
+{
+	pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
+			d->ident);
+	pcie_pme_disable_msi();
+	return 0;
+}
+
+static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = {
+	/*
+	 * Boxes that should not use MSI for PCIe PME signaling.
+	 */
+	{
+	 .callback = dmi_pcie_pme_disable_msi,
+	 .ident = "MSI Wind U-100",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR,
+		     		"MICRO-STAR INTERNATIONAL CO., LTD"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
+		     },
+	 },
+	 {}
+};
+
 static int __init pcie_portdrv_init(void)
 {
 	int retval;
 
+	dmi_check_system(pcie_portdrv_dmi_table);
+
 	retval = pcie_port_bus_register();
 	if (retval) {
 		printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 446e4a9..270d069 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -89,6 +89,7 @@
 
 	if (pci_bus->bridge)
 		put_device(pci_bus->bridge);
+	pci_bus_remove_resources(pci_bus);
 	kfree(pci_bus);
 }
 
@@ -281,26 +282,12 @@
 	}
 }
 
-void __devinit pci_read_bridge_bases(struct pci_bus *child)
+static void __devinit pci_read_bridge_io(struct pci_bus *child)
 {
 	struct pci_dev *dev = child->self;
 	u8 io_base_lo, io_limit_lo;
-	u16 mem_base_lo, mem_limit_lo;
 	unsigned long base, limit;
 	struct resource *res;
-	int i;
-
-	if (pci_is_root_bus(child))	/* It's a host bus, nothing to read */
-		return;
-
-	dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
-		 child->secondary, child->subordinate,
-		 dev->transparent ? " (subtractive decode)": "");
-
-	if (dev->transparent) {
-		for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
-			child->resource[i] = child->parent->resource[i - 3];
-	}
 
 	res = child->resource[0];
 	pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
@@ -316,26 +303,50 @@
 		limit |= (io_limit_hi << 16);
 	}
 
-	if (base <= limit) {
+	if (base && base <= limit) {
 		res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
 		if (!res->start)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
+	} else {
+		dev_printk(KERN_DEBUG, &dev->dev,
+			 "  bridge window [io  %04lx - %04lx] reg reading\n",
+				 base, limit);
 	}
+}
+
+static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
+{
+	struct pci_dev *dev = child->self;
+	u16 mem_base_lo, mem_limit_lo;
+	unsigned long base, limit;
+	struct resource *res;
 
 	res = child->resource[1];
 	pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
 	pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
 	base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
 	limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
-	if (base <= limit) {
+	if (base && base <= limit) {
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
+	} else {
+		dev_printk(KERN_DEBUG, &dev->dev,
+			"  bridge window [mem 0x%08lx - 0x%08lx] reg reading\n",
+					 base, limit + 0xfffff);
 	}
+}
+
+static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
+{
+	struct pci_dev *dev = child->self;
+	u16 mem_base_lo, mem_limit_lo;
+	unsigned long base, limit;
+	struct resource *res;
 
 	res = child->resource[2];
 	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
@@ -366,7 +377,7 @@
 #endif
 		}
 	}
-	if (base <= limit) {
+	if (base && base <= limit) {
 		res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
 					 IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		if (res->flags & PCI_PREF_RANGE_TYPE_64)
@@ -374,6 +385,44 @@
 		res->start = base;
 		res->end = limit + 0xfffff;
 		dev_printk(KERN_DEBUG, &dev->dev, "  bridge window %pR\n", res);
+	} else {
+		dev_printk(KERN_DEBUG, &dev->dev,
+		     "  bridge window [mem 0x%08lx - %08lx pref] reg reading\n",
+					 base, limit + 0xfffff);
+	}
+}
+
+void __devinit pci_read_bridge_bases(struct pci_bus *child)
+{
+	struct pci_dev *dev = child->self;
+	struct resource *res;
+	int i;
+
+	if (pci_is_root_bus(child))	/* It's a host bus, nothing to read */
+		return;
+
+	dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
+		 child->secondary, child->subordinate,
+		 dev->transparent ? " (subtractive decode)" : "");
+
+	pci_bus_remove_resources(child);
+	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
+		child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
+
+	pci_read_bridge_io(child);
+	pci_read_bridge_mmio(child);
+	pci_read_bridge_mmio_pref(child);
+
+	if (dev->transparent) {
+		pci_bus_for_each_resource(child->parent, res, i) {
+			if (res) {
+				pci_bus_add_resource(child, res,
+						     PCI_SUBTRACTIVE_DECODE);
+				dev_printk(KERN_DEBUG, &dev->dev,
+					   "  bridge window %pR (subtractive decode)\n",
+					   res);
+			}
+		}
 	}
 }
 
@@ -387,10 +436,147 @@
 		INIT_LIST_HEAD(&b->children);
 		INIT_LIST_HEAD(&b->devices);
 		INIT_LIST_HEAD(&b->slots);
+		INIT_LIST_HEAD(&b->resources);
+		b->max_bus_speed = PCI_SPEED_UNKNOWN;
+		b->cur_bus_speed = PCI_SPEED_UNKNOWN;
 	}
 	return b;
 }
 
+static unsigned char pcix_bus_speed[] = {
+	PCI_SPEED_UNKNOWN,		/* 0 */
+	PCI_SPEED_66MHz_PCIX,		/* 1 */
+	PCI_SPEED_100MHz_PCIX,		/* 2 */
+	PCI_SPEED_133MHz_PCIX,		/* 3 */
+	PCI_SPEED_UNKNOWN,		/* 4 */
+	PCI_SPEED_66MHz_PCIX_ECC,	/* 5 */
+	PCI_SPEED_100MHz_PCIX_ECC,	/* 6 */
+	PCI_SPEED_133MHz_PCIX_ECC,	/* 7 */
+	PCI_SPEED_UNKNOWN,		/* 8 */
+	PCI_SPEED_66MHz_PCIX_266,	/* 9 */
+	PCI_SPEED_100MHz_PCIX_266,	/* A */
+	PCI_SPEED_133MHz_PCIX_266,	/* B */
+	PCI_SPEED_UNKNOWN,		/* C */
+	PCI_SPEED_66MHz_PCIX_533,	/* D */
+	PCI_SPEED_100MHz_PCIX_533,	/* E */
+	PCI_SPEED_133MHz_PCIX_533	/* F */
+};
+
+static unsigned char pcie_link_speed[] = {
+	PCI_SPEED_UNKNOWN,		/* 0 */
+	PCIE_SPEED_2_5GT,		/* 1 */
+	PCIE_SPEED_5_0GT,		/* 2 */
+	PCIE_SPEED_8_0GT,		/* 3 */
+	PCI_SPEED_UNKNOWN,		/* 4 */
+	PCI_SPEED_UNKNOWN,		/* 5 */
+	PCI_SPEED_UNKNOWN,		/* 6 */
+	PCI_SPEED_UNKNOWN,		/* 7 */
+	PCI_SPEED_UNKNOWN,		/* 8 */
+	PCI_SPEED_UNKNOWN,		/* 9 */
+	PCI_SPEED_UNKNOWN,		/* A */
+	PCI_SPEED_UNKNOWN,		/* B */
+	PCI_SPEED_UNKNOWN,		/* C */
+	PCI_SPEED_UNKNOWN,		/* D */
+	PCI_SPEED_UNKNOWN,		/* E */
+	PCI_SPEED_UNKNOWN		/* F */
+};
+
+void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
+{
+	bus->cur_bus_speed = pcie_link_speed[linksta & 0xf];
+}
+EXPORT_SYMBOL_GPL(pcie_update_link_speed);
+
+static unsigned char agp_speeds[] = {
+	AGP_UNKNOWN,
+	AGP_1X,
+	AGP_2X,
+	AGP_4X,
+	AGP_8X
+};
+
+static enum pci_bus_speed agp_speed(int agp3, int agpstat)
+{
+	int index = 0;
+
+	if (agpstat & 4)
+		index = 3;
+	else if (agpstat & 2)
+		index = 2;
+	else if (agpstat & 1)
+		index = 1;
+	else
+		goto out;
+	
+	if (agp3) {
+		index += 2;
+		if (index == 5)
+			index = 0;
+	}
+
+ out:
+	return agp_speeds[index];
+}
+
+
+static void pci_set_bus_speed(struct pci_bus *bus)
+{
+	struct pci_dev *bridge = bus->self;
+	int pos;
+
+	pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
+	if (!pos)
+		pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
+	if (pos) {
+		u32 agpstat, agpcmd;
+
+		pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
+		bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
+
+		pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
+		bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
+	}
+
+	pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
+	if (pos) {
+		u16 status;
+		enum pci_bus_speed max;
+		pci_read_config_word(bridge, pos + 2, &status);
+
+		if (status & 0x8000) {
+			max = PCI_SPEED_133MHz_PCIX_533;
+		} else if (status & 0x4000) {
+			max = PCI_SPEED_133MHz_PCIX_266;
+		} else if (status & 0x0002) {
+			if (((status >> 12) & 0x3) == 2) {
+				max = PCI_SPEED_133MHz_PCIX_ECC;
+			} else {
+				max = PCI_SPEED_133MHz_PCIX;
+			}
+		} else {
+			max = PCI_SPEED_66MHz_PCIX;
+		}
+
+		bus->max_bus_speed = max;
+		bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf];
+
+		return;
+	}
+
+	pos = pci_find_capability(bridge, PCI_CAP_ID_EXP);
+	if (pos) {
+		u32 linkcap;
+		u16 linksta;
+
+		pci_read_config_dword(bridge, pos + PCI_EXP_LNKCAP, &linkcap);
+		bus->max_bus_speed = pcie_link_speed[linkcap & 0xf];
+
+		pci_read_config_word(bridge, pos + PCI_EXP_LNKSTA, &linksta);
+		pcie_update_link_speed(bus, linksta);
+	}
+}
+
+
 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 					   struct pci_dev *bridge, int busnr)
 {
@@ -430,6 +616,8 @@
 	child->self = bridge;
 	child->bridge = get_device(&bridge->dev);
 
+	pci_set_bus_speed(child);
+
 	/* Set up default resource pointers and names.. */
 	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
 		child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
@@ -1081,6 +1269,45 @@
 }
 EXPORT_SYMBOL(pci_scan_single_device);
 
+static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn)
+{
+	u16 cap;
+	unsigned pos, next_fn;
+
+	if (!dev)
+		return 0;
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
+	if (!pos)
+		return 0;
+	pci_read_config_word(dev, pos + 4, &cap);
+	next_fn = cap >> 8;
+	if (next_fn <= fn)
+		return 0;
+	return next_fn;
+}
+
+static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn)
+{
+	return (fn + 1) % 8;
+}
+
+static unsigned no_next_fn(struct pci_dev *dev, unsigned fn)
+{
+	return 0;
+}
+
+static int only_one_child(struct pci_bus *bus)
+{
+	struct pci_dev *parent = bus->self;
+	if (!parent || !pci_is_pcie(parent))
+		return 0;
+	if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
+	    parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
+		return 1;
+	return 0;
+}
+
 /**
  * pci_scan_slot - scan a PCI slot on a bus for devices.
  * @bus: PCI bus to scan
@@ -1094,21 +1321,30 @@
  */
 int pci_scan_slot(struct pci_bus *bus, int devfn)
 {
-	int fn, nr = 0;
+	unsigned fn, nr = 0;
 	struct pci_dev *dev;
+	unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn;
+
+	if (only_one_child(bus) && (devfn > 0))
+		return 0; /* Already scanned the entire slot */
 
 	dev = pci_scan_single_device(bus, devfn);
-	if (dev && !dev->is_added)	/* new device? */
+	if (!dev)
+		return 0;
+	if (!dev->is_added)
 		nr++;
 
-	if (dev && dev->multifunction) {
-		for (fn = 1; fn < 8; fn++) {
-			dev = pci_scan_single_device(bus, devfn + fn);
-			if (dev) {
-				if (!dev->is_added)
-					nr++;
-				dev->multifunction = 1;
-			}
+	if (pci_ari_enabled(bus))
+		next_fn = next_ari_fn;
+	else if (dev->multifunction)
+		next_fn = next_trad_fn;
+
+	for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) {
+		dev = pci_scan_single_device(bus, devfn + fn);
+		if (dev) {
+			if (!dev->is_added)
+				nr++;
+			dev->multifunction = 1;
 		}
 	}
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d58b940..790eb69 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -25,14 +25,9 @@
 #include <linux/dmi.h>
 #include <linux/pci-aspm.h>
 #include <linux/ioport.h>
+#include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
-int isa_dma_bridge_buggy;
-EXPORT_SYMBOL(isa_dma_bridge_buggy);
-int pci_pci_problems;
-EXPORT_SYMBOL(pci_pci_problems);
-
-#ifdef CONFIG_PCI_QUIRKS
 /*
  * This quirk function disables memory decoding and releases memory resources
  * of the device specified by kernel's boot parameter 'pci=resource_alignment='.
@@ -2612,6 +2607,7 @@
 	}
 	pci_do_fixups(dev, start, end);
 }
+EXPORT_SYMBOL(pci_fixup_device);
 
 static int __init pci_apply_final_quirks(void)
 {
@@ -2723,9 +2719,3 @@
 
 	return -ENOTTY;
 }
-
-#else
-void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {}
-int pci_dev_specific_reset(struct pci_dev *dev, int probe) { return -ENOTTY; }
-#endif
-EXPORT_SYMBOL(pci_fixup_device);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index c48cd37..bf32f07 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -27,37 +27,83 @@
 #include <linux/slab.h>
 #include "pci.h"
 
-static void pbus_assign_resources_sorted(const struct pci_bus *bus)
-{
-	struct pci_dev *dev;
+struct resource_list_x {
+	struct resource_list_x *next;
 	struct resource *res;
-	struct resource_list head, *list, *tmp;
-	int idx;
+	struct pci_dev *dev;
+	resource_size_t start;
+	resource_size_t end;
+	unsigned long flags;
+};
 
-	head.next = NULL;
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 class = dev->class >> 8;
+static void add_to_failed_list(struct resource_list_x *head,
+				 struct pci_dev *dev, struct resource *res)
+{
+	struct resource_list_x *list = head;
+	struct resource_list_x *ln = list->next;
+	struct resource_list_x *tmp;
 
-		/* Don't touch classless devices or host bridges or ioapics.  */
-		if (class == PCI_CLASS_NOT_DEFINED ||
-		    class == PCI_CLASS_BRIDGE_HOST)
-			continue;
-
-		/* Don't touch ioapic devices already enabled by firmware */
-		if (class == PCI_CLASS_SYSTEM_PIC) {
-			u16 command;
-			pci_read_config_word(dev, PCI_COMMAND, &command);
-			if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
-				continue;
-		}
-
-		pdev_sort_resources(dev, &head);
+	tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+	if (!tmp) {
+		pr_warning("add_to_failed_list: kmalloc() failed!\n");
+		return;
 	}
 
-	for (list = head.next; list;) {
+	tmp->next = ln;
+	tmp->res = res;
+	tmp->dev = dev;
+	tmp->start = res->start;
+	tmp->end = res->end;
+	tmp->flags = res->flags;
+	list->next = tmp;
+}
+
+static void free_failed_list(struct resource_list_x *head)
+{
+	struct resource_list_x *list, *tmp;
+
+	for (list = head->next; list;) {
+		tmp = list;
+		list = list->next;
+		kfree(tmp);
+	}
+
+	head->next = NULL;
+}
+
+static void __dev_sort_resources(struct pci_dev *dev,
+				 struct resource_list *head)
+{
+	u16 class = dev->class >> 8;
+
+	/* Don't touch classless devices or host bridges or ioapics.  */
+	if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST)
+		return;
+
+	/* Don't touch ioapic devices already enabled by firmware */
+	if (class == PCI_CLASS_SYSTEM_PIC) {
+		u16 command;
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
+			return;
+	}
+
+	pdev_sort_resources(dev, head);
+}
+
+static void __assign_resources_sorted(struct resource_list *head,
+				 struct resource_list_x *fail_head)
+{
+	struct resource *res;
+	struct resource_list *list, *tmp;
+	int idx;
+
+	for (list = head->next; list;) {
 		res = list->res;
 		idx = res - &list->dev->resource[0];
 		if (pci_assign_resource(list->dev, idx)) {
+			if (fail_head && !pci_is_root_bus(list->dev->bus))
+				add_to_failed_list(fail_head, list->dev, res);
 			res->start = 0;
 			res->end = 0;
 			res->flags = 0;
@@ -68,6 +114,30 @@
 	}
 }
 
+static void pdev_assign_resources_sorted(struct pci_dev *dev,
+				 struct resource_list_x *fail_head)
+{
+	struct resource_list head;
+
+	head.next = NULL;
+	__dev_sort_resources(dev, &head);
+	__assign_resources_sorted(&head, fail_head);
+
+}
+
+static void pbus_assign_resources_sorted(const struct pci_bus *bus,
+					 struct resource_list_x *fail_head)
+{
+	struct pci_dev *dev;
+	struct resource_list head;
+
+	head.next = NULL;
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		__dev_sort_resources(dev, &head);
+
+	__assign_resources_sorted(&head, fail_head);
+}
+
 void pci_setup_cardbus(struct pci_bus *bus)
 {
 	struct pci_dev *bridge = bus->self;
@@ -134,18 +204,12 @@
    config space writes, so it's quite possible that an I/O window of
    the bridge will have some undesirable address (e.g. 0) after the
    first write. Ditto 64-bit prefetchable MMIO.  */
-static void pci_setup_bridge(struct pci_bus *bus)
+static void pci_setup_bridge_io(struct pci_bus *bus)
 {
 	struct pci_dev *bridge = bus->self;
 	struct resource *res;
 	struct pci_bus_region region;
-	u32 l, bu, lu, io_upper16;
-
-	if (pci_is_enabled(bridge))
-		return;
-
-	dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
-		 bus->secondary, bus->subordinate);
+	u32 l, io_upper16;
 
 	/* Set up the top and bottom of the PCI I/O segment for this bus. */
 	res = bus->resource[0];
@@ -158,8 +222,7 @@
 		/* Set up upper 16 bits of I/O base/limit. */
 		io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
-	}
-	else {
+	} else {
 		/* Clear upper 16 bits of I/O base/limit. */
 		io_upper16 = 0;
 		l = 0x00f0;
@@ -171,21 +234,35 @@
 	pci_write_config_dword(bridge, PCI_IO_BASE, l);
 	/* Update upper 16 bits of I/O base/limit. */
 	pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
+}
 
-	/* Set up the top and bottom of the PCI Memory segment
-	   for this bus. */
+static void pci_setup_bridge_mmio(struct pci_bus *bus)
+{
+	struct pci_dev *bridge = bus->self;
+	struct resource *res;
+	struct pci_bus_region region;
+	u32 l;
+
+	/* Set up the top and bottom of the PCI Memory segment for this bus. */
 	res = bus->resource[1];
 	pcibios_resource_to_bus(bridge, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		l = (region.start >> 16) & 0xfff0;
 		l |= region.end & 0xfff00000;
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
-	}
-	else {
+	} else {
 		l = 0x0000fff0;
 		dev_info(&bridge->dev, "  bridge window [mem disabled]\n");
 	}
 	pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
+}
+
+static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
+{
+	struct pci_dev *bridge = bus->self;
+	struct resource *res;
+	struct pci_bus_region region;
+	u32 l, bu, lu;
 
 	/* Clear out the upper 32 bits of PREF limit.
 	   If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily
@@ -204,8 +281,7 @@
 			lu = upper_32_bits(region.end);
 		}
 		dev_info(&bridge->dev, "  bridge window %pR\n", res);
-	}
-	else {
+	} else {
 		l = 0x0000fff0;
 		dev_info(&bridge->dev, "  bridge window [mem pref disabled]\n");
 	}
@@ -214,10 +290,35 @@
 	/* Set the upper 32 bits of PREF base & limit. */
 	pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
 	pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+}
+
+static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
+{
+	struct pci_dev *bridge = bus->self;
+
+	dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
+		 bus->secondary, bus->subordinate);
+
+	if (type & IORESOURCE_IO)
+		pci_setup_bridge_io(bus);
+
+	if (type & IORESOURCE_MEM)
+		pci_setup_bridge_mmio(bus);
+
+	if (type & IORESOURCE_PREFETCH)
+		pci_setup_bridge_mmio_pref(bus);
 
 	pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
 }
 
+static void pci_setup_bridge(struct pci_bus *bus)
+{
+	unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
+				  IORESOURCE_PREFETCH;
+
+	__pci_setup_bridge(bus, type);
+}
+
 /* Check whether the bridge supports optional I/O and
    prefetchable memory ranges. If not, the respective
    base/limit registers must be read-only and read as 0. */
@@ -253,8 +354,11 @@
 	}
 	if (pmem) {
 		b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
-		if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
+		if ((pmem & PCI_PREF_RANGE_TYPE_MASK) ==
+		    PCI_PREF_RANGE_TYPE_64) {
 			b_res[2].flags |= IORESOURCE_MEM_64;
+			b_res[2].flags |= PCI_PREF_RANGE_TYPE_64;
+		}
 	}
 
 	/* double check if bridge does support 64 bit pref */
@@ -283,8 +387,7 @@
 	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
 				  IORESOURCE_PREFETCH;
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		r = bus->resource[i];
+	pci_bus_for_each_resource(bus, r, i) {
 		if (r == &ioport_resource || r == &iomem_resource)
 			continue;
 		if (r && (r->flags & type_mask) == type && !r->parent)
@@ -301,7 +404,7 @@
 {
 	struct pci_dev *dev;
 	struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO);
-	unsigned long size = 0, size1 = 0;
+	unsigned long size = 0, size1 = 0, old_size;
 
 	if (!b_res)
  		return;
@@ -326,12 +429,17 @@
 	}
 	if (size < min_size)
 		size = min_size;
+	old_size = resource_size(b_res);
+	if (old_size == 1)
+		old_size = 0;
 /* To be fixed in 2.5: we should have sort of HAVE_ISA
    flag in the struct pci_bus. */
 #if defined(CONFIG_ISA) || defined(CONFIG_EISA)
 	size = (size & 0xff) + ((size & ~0xffUL) << 2);
 #endif
 	size = ALIGN(size + size1, 4096);
+	if (size < old_size)
+		size = old_size;
 	if (!size) {
 		if (b_res->start || b_res->end)
 			dev_info(&bus->self->dev, "disabling bridge window "
@@ -352,7 +460,7 @@
 			 unsigned long type, resource_size_t min_size)
 {
 	struct pci_dev *dev;
-	resource_size_t min_align, align, size;
+	resource_size_t min_align, align, size, old_size;
 	resource_size_t aligns[12];	/* Alignments from 1Mb to 2Gb */
 	int order, max_order;
 	struct resource *b_res = find_free_bus_resource(bus, type);
@@ -402,6 +510,11 @@
 	}
 	if (size < min_size)
 		size = min_size;
+	old_size = resource_size(b_res);
+	if (old_size == 1)
+		old_size = 0;
+	if (size < old_size)
+		size = old_size;
 
 	align = 0;
 	min_align = 0;
@@ -538,23 +651,25 @@
 }
 EXPORT_SYMBOL(pci_bus_size_bridges);
 
-void __ref pci_bus_assign_resources(const struct pci_bus *bus)
+static void __ref __pci_bus_assign_resources(const struct pci_bus *bus,
+					 struct resource_list_x *fail_head)
 {
 	struct pci_bus *b;
 	struct pci_dev *dev;
 
-	pbus_assign_resources_sorted(bus);
+	pbus_assign_resources_sorted(bus, fail_head);
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		b = dev->subordinate;
 		if (!b)
 			continue;
 
-		pci_bus_assign_resources(b);
+		__pci_bus_assign_resources(b, fail_head);
 
 		switch (dev->class >> 8) {
 		case PCI_CLASS_BRIDGE_PCI:
-			pci_setup_bridge(b);
+			if (!pci_is_enabled(dev))
+				pci_setup_bridge(b);
 			break;
 
 		case PCI_CLASS_BRIDGE_CARDBUS:
@@ -568,15 +683,130 @@
 		}
 	}
 }
+
+void __ref pci_bus_assign_resources(const struct pci_bus *bus)
+{
+	__pci_bus_assign_resources(bus, NULL);
+}
 EXPORT_SYMBOL(pci_bus_assign_resources);
 
+static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge,
+					 struct resource_list_x *fail_head)
+{
+	struct pci_bus *b;
+
+	pdev_assign_resources_sorted((struct pci_dev *)bridge, fail_head);
+
+	b = bridge->subordinate;
+	if (!b)
+		return;
+
+	__pci_bus_assign_resources(b, fail_head);
+
+	switch (bridge->class >> 8) {
+	case PCI_CLASS_BRIDGE_PCI:
+		pci_setup_bridge(b);
+		break;
+
+	case PCI_CLASS_BRIDGE_CARDBUS:
+		pci_setup_cardbus(b);
+		break;
+
+	default:
+		dev_info(&bridge->dev, "not setting up bridge for bus "
+			 "%04x:%02x\n", pci_domain_nr(b), b->number);
+		break;
+	}
+}
+static void pci_bridge_release_resources(struct pci_bus *bus,
+					  unsigned long type)
+{
+	int idx;
+	bool changed = false;
+	struct pci_dev *dev;
+	struct resource *r;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+				  IORESOURCE_PREFETCH;
+
+	dev = bus->self;
+	for (idx = PCI_BRIDGE_RESOURCES; idx <= PCI_BRIDGE_RESOURCE_END;
+	     idx++) {
+		r = &dev->resource[idx];
+		if ((r->flags & type_mask) != type)
+			continue;
+		if (!r->parent)
+			continue;
+		/*
+		 * if there are children under that, we should release them
+		 *  all
+		 */
+		release_child_resources(r);
+		if (!release_resource(r)) {
+			dev_printk(KERN_DEBUG, &dev->dev,
+				 "resource %d %pR released\n", idx, r);
+			/* keep the old size */
+			r->end = resource_size(r) - 1;
+			r->start = 0;
+			r->flags = 0;
+			changed = true;
+		}
+	}
+
+	if (changed) {
+		/* avoiding touch the one without PREF */
+		if (type & IORESOURCE_PREFETCH)
+			type = IORESOURCE_PREFETCH;
+		__pci_setup_bridge(bus, type);
+	}
+}
+
+enum release_type {
+	leaf_only,
+	whole_subtree,
+};
+/*
+ * try to release pci bridge resources that is from leaf bridge,
+ * so we can allocate big new one later
+ */
+static void __ref pci_bus_release_bridge_resources(struct pci_bus *bus,
+						   unsigned long type,
+						   enum release_type rel_type)
+{
+	struct pci_dev *dev;
+	bool is_leaf_bridge = true;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		struct pci_bus *b = dev->subordinate;
+		if (!b)
+			continue;
+
+		is_leaf_bridge = false;
+
+		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+			continue;
+
+		if (rel_type == whole_subtree)
+			pci_bus_release_bridge_resources(b, type,
+						 whole_subtree);
+	}
+
+	if (pci_is_root_bus(bus))
+		return;
+
+	if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+		return;
+
+	if ((rel_type == whole_subtree) || is_leaf_bridge)
+		pci_bridge_release_resources(bus, type);
+}
+
 static void pci_bus_dump_res(struct pci_bus *bus)
 {
-        int i;
+	struct resource *res;
+	int i;
 
-        for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-                struct resource *res = bus->resource[i];
-                if (!res || !res->end)
+	pci_bus_for_each_resource(bus, res, i) {
+		if (!res || !res->end || !res->flags)
                         continue;
 
 		dev_printk(KERN_DEBUG, &bus->dev, "resource %d %pR\n", i, res);
@@ -600,11 +830,65 @@
 	}
 }
 
+static int __init pci_bus_get_depth(struct pci_bus *bus)
+{
+	int depth = 0;
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		int ret;
+		struct pci_bus *b = dev->subordinate;
+		if (!b)
+			continue;
+
+		ret = pci_bus_get_depth(b);
+		if (ret + 1 > depth)
+			depth = ret + 1;
+	}
+
+	return depth;
+}
+static int __init pci_get_max_depth(void)
+{
+	int depth = 0;
+	struct pci_bus *bus;
+
+	list_for_each_entry(bus, &pci_root_buses, node) {
+		int ret;
+
+		ret = pci_bus_get_depth(bus);
+		if (ret > depth)
+			depth = ret;
+	}
+
+	return depth;
+}
+
+/*
+ * first try will not touch pci bridge res
+ * second  and later try will clear small leaf bridge res
+ * will stop till to the max  deepth if can not find good one
+ */
 void __init
 pci_assign_unassigned_resources(void)
 {
 	struct pci_bus *bus;
+	int tried_times = 0;
+	enum release_type rel_type = leaf_only;
+	struct resource_list_x head, *list;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+				  IORESOURCE_PREFETCH;
+	unsigned long failed_type;
+	int max_depth = pci_get_max_depth();
+	int pci_try_num;
 
+	head.next = NULL;
+
+	pci_try_num = max_depth + 1;
+	printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
+		 max_depth, pci_try_num);
+
+again:
 	/* Depth first, calculate sizes and alignments of all
 	   subordinate buses. */
 	list_for_each_entry(bus, &pci_root_buses, node) {
@@ -612,12 +896,130 @@
 	}
 	/* Depth last, allocate resources and update the hardware. */
 	list_for_each_entry(bus, &pci_root_buses, node) {
-		pci_bus_assign_resources(bus);
-		pci_enable_bridges(bus);
+		__pci_bus_assign_resources(bus, &head);
 	}
+	tried_times++;
+
+	/* any device complain? */
+	if (!head.next)
+		goto enable_and_dump;
+	failed_type = 0;
+	for (list = head.next; list;) {
+		failed_type |= list->flags;
+		list = list->next;
+	}
+	/*
+	 * io port are tight, don't try extra
+	 * or if reach the limit, don't want to try more
+	 */
+	failed_type &= type_mask;
+	if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) {
+		free_failed_list(&head);
+		goto enable_and_dump;
+	}
+
+	printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+			 tried_times + 1);
+
+	/* third times and later will not check if it is leaf */
+	if ((tried_times + 1) > 2)
+		rel_type = whole_subtree;
+
+	/*
+	 * Try to release leaf bridge's resources that doesn't fit resource of
+	 * child device under that bridge
+	 */
+	for (list = head.next; list;) {
+		bus = list->dev->bus;
+		pci_bus_release_bridge_resources(bus, list->flags & type_mask,
+						  rel_type);
+		list = list->next;
+	}
+	/* restore size and flags */
+	for (list = head.next; list;) {
+		struct resource *res = list->res;
+
+		res->start = list->start;
+		res->end = list->end;
+		res->flags = list->flags;
+		if (list->dev->subordinate)
+			res->flags = 0;
+
+		list = list->next;
+	}
+	free_failed_list(&head);
+
+	goto again;
+
+enable_and_dump:
+	/* Depth last, update the hardware. */
+	list_for_each_entry(bus, &pci_root_buses, node)
+		pci_enable_bridges(bus);
 
 	/* dump the resource on buses */
 	list_for_each_entry(bus, &pci_root_buses, node) {
 		pci_bus_dump_resources(bus);
 	}
 }
+
+void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
+{
+	struct pci_bus *parent = bridge->subordinate;
+	int tried_times = 0;
+	struct resource_list_x head, *list;
+	int retval;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+				  IORESOURCE_PREFETCH;
+
+	head.next = NULL;
+
+again:
+	pci_bus_size_bridges(parent);
+	__pci_bridge_assign_resources(bridge, &head);
+	retval = pci_reenable_device(bridge);
+	pci_set_master(bridge);
+	pci_enable_bridges(parent);
+
+	tried_times++;
+
+	if (!head.next)
+		return;
+
+	if (tried_times >= 2) {
+		/* still fail, don't need to try more */
+		free_failed_list(&head);
+		return;
+	}
+
+	printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+			 tried_times + 1);
+
+	/*
+	 * Try to release leaf bridge's resources that doesn't fit resource of
+	 * child device under that bridge
+	 */
+	for (list = head.next; list;) {
+		struct pci_bus *bus = list->dev->bus;
+		unsigned long flags = list->flags;
+
+		pci_bus_release_bridge_resources(bus, flags & type_mask,
+						 whole_subtree);
+		list = list->next;
+	}
+	/* restore size and flags */
+	for (list = head.next; list;) {
+		struct resource *res = list->res;
+
+		res->start = list->start;
+		res->end = list->end;
+		res->flags = list->flags;
+		if (list->dev->subordinate)
+			res->flags = 0;
+
+		list = list->next;
+	}
+	free_failed_list(&head);
+
+	goto again;
+}
+EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 8c02b6c..49c9e6c 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -47,6 +47,55 @@
 				slot->number);
 }
 
+/* these strings match up with the values in pci_bus_speed */
+static char *pci_bus_speed_strings[] = {
+	"33 MHz PCI",		/* 0x00 */
+	"66 MHz PCI",		/* 0x01 */
+	"66 MHz PCI-X", 	/* 0x02 */
+	"100 MHz PCI-X",	/* 0x03 */
+	"133 MHz PCI-X",	/* 0x04 */
+	NULL,			/* 0x05 */
+	NULL,			/* 0x06 */
+	NULL,			/* 0x07 */
+	NULL,			/* 0x08 */
+	"66 MHz PCI-X 266",	/* 0x09 */
+	"100 MHz PCI-X 266",	/* 0x0a */
+	"133 MHz PCI-X 266",	/* 0x0b */
+	"Unknown AGP",		/* 0x0c */
+	"1x AGP",		/* 0x0d */
+	"2x AGP",		/* 0x0e */
+	"4x AGP",		/* 0x0f */
+	"8x AGP",		/* 0x10 */
+	"66 MHz PCI-X 533",	/* 0x11 */
+	"100 MHz PCI-X 533",	/* 0x12 */
+	"133 MHz PCI-X 533",	/* 0x13 */
+	"2.5 GT/s PCIe",	/* 0x14 */
+	"5.0 GT/s PCIe",	/* 0x15 */
+	"8.0 GT/s PCIe",	/* 0x16 */
+};
+
+static ssize_t bus_speed_read(enum pci_bus_speed speed, char *buf)
+{
+	const char *speed_string;
+
+	if (speed < ARRAY_SIZE(pci_bus_speed_strings))
+		speed_string = pci_bus_speed_strings[speed];
+	else
+		speed_string = "Unknown";
+
+	return sprintf(buf, "%s\n", speed_string);
+}
+
+static ssize_t max_speed_read_file(struct pci_slot *slot, char *buf)
+{
+	return bus_speed_read(slot->bus->max_bus_speed, buf);
+}
+
+static ssize_t cur_speed_read_file(struct pci_slot *slot, char *buf)
+{
+	return bus_speed_read(slot->bus->cur_bus_speed, buf);
+}
+
 static void pci_slot_release(struct kobject *kobj)
 {
 	struct pci_dev *dev;
@@ -66,9 +115,15 @@
 
 static struct pci_slot_attribute pci_slot_attr_address =
 	__ATTR(address, (S_IFREG | S_IRUGO), address_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_max_speed =
+	__ATTR(max_bus_speed, (S_IFREG | S_IRUGO), max_speed_read_file, NULL);
+static struct pci_slot_attribute pci_slot_attr_cur_speed =
+	__ATTR(cur_bus_speed, (S_IFREG | S_IRUGO), cur_speed_read_file, NULL);
 
 static struct attribute *pci_slot_default_attrs[] = {
 	&pci_slot_attr_address.attr,
+	&pci_slot_attr_max_speed.attr,
+	&pci_slot_attr_cur_speed.attr,
 	NULL,
 };
 
diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c
index 52db172..f8401a0 100644
--- a/drivers/pcmcia/rsrc_mgr.c
+++ b/drivers/pcmcia/rsrc_mgr.c
@@ -114,22 +114,21 @@
 	unsigned long	offset;
 };
 
-static void pcmcia_align(void *align_data, struct resource *res,
-			unsigned long size, unsigned long align)
+static resource_size_t pcmcia_align(void *align_data,
+				const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
 	struct pcmcia_align_data *data = align_data;
-	unsigned long start;
+	resource_size_t start;
 
 	start = (res->start & ~data->mask) + data->offset;
 	if (start < res->start)
 		start += data->mask + 1;
-	res->start = start;
 
 #ifdef CONFIG_X86
 	if (res->flags & IORESOURCE_IO) {
 		if (start & 0x300) {
 			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
 		}
 	}
 #endif
@@ -137,9 +136,11 @@
 #ifdef CONFIG_M68K
 	if (res->flags & IORESOURCE_IO) {
 		if ((res->start + size - 1) >= 1024)
-			res->start = res->end;
+			start = res->end;
 	}
 #endif
+
+	return start;
 }
 
 
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 9b0dc43..c67638f 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -533,8 +533,8 @@
 	struct resource_map	*map;
 };
 
-static void
-pcmcia_common_align(void *align_data, struct resource *res,
+static resource_size_t
+pcmcia_common_align(void *align_data, const struct resource *res,
 			resource_size_t size, resource_size_t align)
 {
 	struct pcmcia_align_data *data = align_data;
@@ -545,17 +545,18 @@
 	start = (res->start & ~data->mask) + data->offset;
 	if (start < res->start)
 		start += data->mask + 1;
-	res->start = start;
+	return start;
 }
 
-static void
-pcmcia_align(void *align_data, struct resource *res, resource_size_t size,
-		resource_size_t align)
+static resource_size_t
+pcmcia_align(void *align_data, const struct resource *res,
+	resource_size_t size, resource_size_t align)
 {
 	struct pcmcia_align_data *data = align_data;
 	struct resource_map *m;
+	resource_size_t start;
 
-	pcmcia_common_align(data, res, size, align);
+	start = pcmcia_common_align(data, res, size, align);
 
 	for (m = data->map->next; m != data->map; m = m->next) {
 		unsigned long start = m->base;
@@ -567,8 +568,7 @@
 		 * fit here.
 		 */
 		if (res->start < start) {
-			res->start = start;
-			pcmcia_common_align(data, res, size, align);
+			start = pcmcia_common_align(data, res, size, align);
 		}
 
 		/*
@@ -586,7 +586,9 @@
 	 * If we failed to find something suitable, ensure we fail.
 	 */
 	if (m == data->map)
-		res->start = res->end;
+		start = res->end;
+
+	return start;
 }
 
 /*
@@ -801,8 +803,7 @@
 		return -EINVAL;
 #endif
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		res = s->cb_dev->bus->resource[i];
+	pci_bus_for_each_resource(s->cb_dev->bus, res, i) {
 		if (!res)
 			continue;
 
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index e4d12ac..1f2039d 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -649,9 +649,10 @@
 static int yenta_search_res(struct yenta_socket *socket, struct resource *res,
 			    u32 min)
 {
+	struct resource *root;
 	int i;
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		struct resource *root = socket->dev->bus->resource[i];
+
+	pci_bus_for_each_resource(socket->dev->bus, root, i) {
 		if (!root)
 			continue;
 
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 07d14df..226b3e9 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -934,7 +934,7 @@
 	acer_backlight_device = bd;
 
 	bd->props.power = FB_BLANK_UNBLANK;
-	bd->props.brightness = max_brightness;
+	bd->props.brightness = read_brightness(bd);
 	bd->props.max_brightness = max_brightness;
 	backlight_update_status(bd);
 	return 0;
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e67e4fe..eb603f1d5 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5771,7 +5771,7 @@
 	case TPACPI_THERMAL_ACPI_TMP07:
 	case TPACPI_THERMAL_ACPI_UPDT:
 		sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
-				   &thermal_temp_input16_group);
+				   &thermal_temp_input8_group);
 		break;
 	case TPACPI_THERMAL_NONE:
 	default:
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 75ac19b..fc2f676 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -233,7 +233,7 @@
 
 	ph = 0;
 	if (dp)
-		ph = dp->node;
+		ph = dp->phandle;
 
 	data->current_node = dp;
 	*((int *) op->oprom_array) = ph;
@@ -256,7 +256,7 @@
 
 		dp = pci_device_to_OF_node(pdev);
 		data->current_node = dp;
-		*((int *)op->oprom_array) = dp->node;
+		*((int *)op->oprom_array) = dp->phandle;
 		op->oprom_size = sizeof(int);
 		err = copyout(argp, op, bufsize + sizeof(int));
 
@@ -273,7 +273,7 @@
 
 	dp = of_find_node_by_path(op->oprom_array);
 	if (dp)
-		ph = dp->node;
+		ph = dp->phandle;
 	data->current_node = dp;
 	*((int *)op->oprom_array) = ph;
 	op->oprom_size = sizeof(int);
@@ -540,7 +540,7 @@
 		}
 	}
 	if (dp)
-		nd = dp->node;
+		nd = dp->phandle;
 	if (copy_to_user(argp, &nd, sizeof(phandle)))
 		return -EFAULT;
 
@@ -570,7 +570,7 @@
 	case OPIOCGETOPTNODE:
 		BUILD_BUG_ON(sizeof(phandle) != sizeof(int));
 
-		if (copy_to_user(argp, &options_node->node, sizeof(phandle)))
+		if (copy_to_user(argp, &options_node->phandle, sizeof(phandle)))
 			return -EFAULT;
 
 		return 0;
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 4775426..9e71ac6 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2516,7 +2516,7 @@
 		if (info->scsi.phase == PHASE_IDLE)
 			fas216_kick(info);
 
-		mod_timer(&info->eh_timer, 30 * HZ);
+		mod_timer(&info->eh_timer, jiffies + 30 * HZ);
 		spin_unlock_irqrestore(&info->host_lock, flags);
 
 		/*
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 10be9f3..2f47ae7 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -2009,6 +2009,8 @@
 	fcoe_interface_cleanup(fcoe);
 	rtnl_unlock();
 	fcoe_if_destroy(fcoe->ctlr.lp);
+	module_put(THIS_MODULE);
+
 out_putdev:
 	dev_put(netdev);
 out_nodev:
@@ -2059,6 +2061,11 @@
 	}
 #endif
 
+	if (!try_module_get(THIS_MODULE)) {
+		rc = -EINVAL;
+		goto out_nomod;
+	}
+
 	rtnl_lock();
 	netdev = fcoe_if_to_netdev(buffer);
 	if (!netdev) {
@@ -2099,17 +2106,24 @@
 	if (!fcoe_link_ok(lport))
 		fcoe_ctlr_link_up(&fcoe->ctlr);
 
-	rc = 0;
-out_free:
 	/*
 	 * Release from init in fcoe_interface_create(), on success lport
 	 * should be holding a reference taken in fcoe_if_create().
 	 */
 	fcoe_interface_put(fcoe);
+	dev_put(netdev);
+	rtnl_unlock();
+	mutex_unlock(&fcoe_config_mutex);
+
+	return 0;
+out_free:
+	fcoe_interface_put(fcoe);
 out_putdev:
 	dev_put(netdev);
 out_nodev:
 	rtnl_unlock();
+	module_put(THIS_MODULE);
+out_nomod:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
 }
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 9823291..511cb6b 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -1187,7 +1187,7 @@
 			next_timer = fip->ctlr_ka_time;
 
 		if (time_after_eq(jiffies, fip->port_ka_time)) {
-			fip->port_ka_time += jiffies +
+			fip->port_ka_time = jiffies +
 				msecs_to_jiffies(FIP_VN_KA_PERIOD);
 			fip->send_port_ka = 1;
 		}
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 19d711c..7f43647 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1890,7 +1890,7 @@
 	fc_exch_setup_hdr(ep, fp, ep->f_ctl);
 	sp->cnt++;
 
-	if (ep->xid <= lport->lro_xid)
+	if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD)
 		fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
 
 	if (unlikely(lport->tt.frame_send(lport, fp)))
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 881d5df..6fde2fab 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -298,9 +298,6 @@
 {
 	struct fc_lport *lport;
 
-	if (!fsp)
-		return;
-
 	lport = fsp->lp;
 	if ((fsp->req_flags & FC_SRB_READ) &&
 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 0b16502..7ec8ce7 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1800,7 +1800,8 @@
 	u32 did;
 
 	job->reply->reply_payload_rcv_len = 0;
-	rsp->resid_len = job->reply_payload.payload_len;
+	if (rsp)
+		rsp->resid_len = job->reply_payload.payload_len;
 
 	mutex_lock(&lport->lp_mutex);
 
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 0230052..97923bb 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -623,7 +623,7 @@
 
 		tov = ntohl(plp->fl_csp.sp_e_d_tov);
 		if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR)
-			tov /= 1000;
+			tov /= 1000000;
 		if (tov > rdata->e_d_tov)
 			rdata->e_d_tov = tov;
 		csp_seq = ntohs(plp->fl_csp.sp_tot_seq);
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index db6856c..4ad87fd 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -992,12 +992,10 @@
 		if (r2t == NULL) {
 			if (kfifo_out(&tcp_task->r2tqueue,
 			    (void *)&tcp_task->r2t, sizeof(void *)) !=
-			    sizeof(void *)) {
-				WARN_ONCE(1, "unexpected fifo state");
+			    sizeof(void *))
 				r2t = NULL;
-			}
-
-			r2t = tcp_task->r2t;
+			else
+				r2t = tcp_task->r2t;
 		}
 		spin_unlock_bh(&session->lock);
 	}
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 708ea31..d9b8ca5 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -3781,6 +3781,7 @@
 	    compat_alloc_user_space(sizeof(struct megasas_iocpacket));
 	int i;
 	int error = 0;
+	compat_uptr_t ptr;
 
 	if (clear_user(ioc, sizeof(*ioc)))
 		return -EFAULT;
@@ -3793,9 +3794,22 @@
 	    copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32)))
 		return -EFAULT;
 
-	for (i = 0; i < MAX_IOCTL_SGE; i++) {
-		compat_uptr_t ptr;
+	/*
+	 * The sense_ptr is used in megasas_mgmt_fw_ioctl only when
+	 * sense_len is not null, so prepare the 64bit value under
+	 * the same condition.
+	 */
+	if (ioc->sense_len) {
+		void __user **sense_ioc_ptr =
+			(void __user **)(ioc->frame.raw + ioc->sense_off);
+		compat_uptr_t *sense_cioc_ptr =
+			(compat_uptr_t *)(cioc->frame.raw + cioc->sense_off);
+		if (get_user(ptr, sense_cioc_ptr) ||
+		    put_user(compat_ptr(ptr), sense_ioc_ptr))
+			return -EFAULT;
+	}
 
+	for (i = 0; i < MAX_IOCTL_SGE; i++) {
 		if (get_user(ptr, &cioc->sgl[i].iov_base) ||
 		    put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) ||
 		    copy_in_user(&ioc->sgl[i].iov_len,
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index c3e37c8e..e9b15c3 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -83,6 +83,9 @@
 
 #define PASS_LIMIT	256
 
+#define BOTH_EMPTY 	(UART_LSR_TEMT | UART_LSR_THRE)
+
+
 /*
  * We default to IRQ0 for the "no irq" hack.   Some
  * machine types want others as well - they're free
@@ -1792,7 +1795,7 @@
 	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
 	spin_unlock_irqrestore(&up->port.lock, flags);
 
-	return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+	return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
@@ -1850,8 +1853,6 @@
 	spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
 /*
  *	Wait for transmitter & holding register to empty
  */
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 683e66f..3e2ae48 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -2031,9 +2031,9 @@
 	/*
 	 * XServe's default to 57600 bps
 	 */
-	if (machine_is_compatible("RackMac1,1")
-	    || machine_is_compatible("RackMac1,2")
-	    || machine_is_compatible("MacRISC4"))
+	if (of_machine_is_compatible("RackMac1,1")
+	    || of_machine_is_compatible("RackMac1,2")
+	    || of_machine_is_compatible("MacRISC4"))
 	 	baud = 57600;
 
 	/*
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index f55eb01..0fee95c 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -100,6 +100,23 @@
 	  inexpensive battery powered microcontroller evaluation board.
 	  This same cable can be used to flash new firmware.
 
+config SPI_COLDFIRE_QSPI
+	tristate "Freescale Coldfire QSPI controller"
+	depends on (M520x || M523x || M5249 || M527x || M528x || M532x)
+	help
+	  This enables support for the Coldfire QSPI controller in master
+	  mode.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called coldfire_qspi.
+
+config SPI_DAVINCI
+	tristate "SPI controller driver for DaVinci/DA8xx SoC's"
+	depends on SPI_MASTER && ARCH_DAVINCI
+	select SPI_BITBANG
+	help
+	  SPI master controller for DaVinci and DA8xx SPI modules.
+
 config SPI_GPIO
 	tristate "GPIO-based bitbanging SPI Master"
 	depends on GENERIC_GPIO
@@ -308,7 +325,7 @@
 #
 
 config SPI_DESIGNWARE
-	bool "DesignWare SPI controller core support"
+	tristate "DesignWare SPI controller core support"
 	depends on SPI_MASTER
 	help
 	  general driver for SPI controller core from DesignWare
@@ -317,6 +334,10 @@
 	tristate "PCI interface driver for DW SPI core"
 	depends on SPI_DESIGNWARE && PCI
 
+config SPI_DW_MMIO
+	tristate "Memory-mapped io interface driver for DW SPI core"
+	depends on SPI_DESIGNWARE && HAVE_CLK
+
 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index f3d2810..d7d0f89 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -16,8 +16,11 @@
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= coldfire_qspi.o
+obj-$(CONFIG_SPI_DAVINCI)		+= davinci_spi.o
 obj-$(CONFIG_SPI_DESIGNWARE)		+= dw_spi.o
 obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_pci.o
+obj-$(CONFIG_SPI_DW_MMIO)		+= dw_spi_mmio.o
 obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
 obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
diff --git a/drivers/spi/coldfire_qspi.c b/drivers/spi/coldfire_qspi.c
new file mode 100644
index 0000000..59be3ef
--- /dev/null
+++ b/drivers/spi/coldfire_qspi.c
@@ -0,0 +1,640 @@
+/*
+ * Freescale/Motorola Coldfire Queued SPI driver
+ *
+ * Copyright 2010 Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfqspi.h>
+
+#define	DRIVER_NAME "mcfqspi"
+
+#define	MCFQSPI_BUSCLK			(MCF_BUSCLK / 2)
+
+#define	MCFQSPI_QMR			0x00
+#define		MCFQSPI_QMR_MSTR	0x8000
+#define		MCFQSPI_QMR_CPOL	0x0200
+#define		MCFQSPI_QMR_CPHA	0x0100
+#define	MCFQSPI_QDLYR			0x04
+#define		MCFQSPI_QDLYR_SPE	0x8000
+#define	MCFQSPI_QWR			0x08
+#define		MCFQSPI_QWR_HALT	0x8000
+#define		MCFQSPI_QWR_WREN	0x4000
+#define		MCFQSPI_QWR_CSIV	0x1000
+#define	MCFQSPI_QIR			0x0C
+#define		MCFQSPI_QIR_WCEFB	0x8000
+#define		MCFQSPI_QIR_ABRTB	0x4000
+#define		MCFQSPI_QIR_ABRTL	0x1000
+#define		MCFQSPI_QIR_WCEFE	0x0800
+#define		MCFQSPI_QIR_ABRTE	0x0400
+#define		MCFQSPI_QIR_SPIFE	0x0100
+#define		MCFQSPI_QIR_WCEF	0x0008
+#define		MCFQSPI_QIR_ABRT	0x0004
+#define		MCFQSPI_QIR_SPIF	0x0001
+#define	MCFQSPI_QAR			0x010
+#define		MCFQSPI_QAR_TXBUF	0x00
+#define		MCFQSPI_QAR_RXBUF	0x10
+#define		MCFQSPI_QAR_CMDBUF	0x20
+#define	MCFQSPI_QDR			0x014
+#define	MCFQSPI_QCR			0x014
+#define		MCFQSPI_QCR_CONT	0x8000
+#define		MCFQSPI_QCR_BITSE	0x4000
+#define		MCFQSPI_QCR_DT		0x2000
+
+struct mcfqspi {
+	void __iomem *iobase;
+	int irq;
+	struct clk *clk;
+	struct mcfqspi_cs_control *cs_control;
+
+	wait_queue_head_t waitq;
+
+	struct work_struct work;
+	struct workqueue_struct *workq;
+	spinlock_t lock;
+	struct list_head msgq;
+};
+
+static void mcfqspi_wr_qmr(struct mcfqspi *mcfqspi, u16 val)
+{
+	writew(val, mcfqspi->iobase + MCFQSPI_QMR);
+}
+
+static void mcfqspi_wr_qdlyr(struct mcfqspi *mcfqspi, u16 val)
+{
+	writew(val, mcfqspi->iobase + MCFQSPI_QDLYR);
+}
+
+static u16 mcfqspi_rd_qdlyr(struct mcfqspi *mcfqspi)
+{
+	return readw(mcfqspi->iobase + MCFQSPI_QDLYR);
+}
+
+static void mcfqspi_wr_qwr(struct mcfqspi *mcfqspi, u16 val)
+{
+	writew(val, mcfqspi->iobase + MCFQSPI_QWR);
+}
+
+static void mcfqspi_wr_qir(struct mcfqspi *mcfqspi, u16 val)
+{
+	writew(val, mcfqspi->iobase + MCFQSPI_QIR);
+}
+
+static void mcfqspi_wr_qar(struct mcfqspi *mcfqspi, u16 val)
+{
+	writew(val, mcfqspi->iobase + MCFQSPI_QAR);
+}
+
+static void mcfqspi_wr_qdr(struct mcfqspi *mcfqspi, u16 val)
+{
+	writew(val, mcfqspi->iobase + MCFQSPI_QDR);
+}
+
+static u16 mcfqspi_rd_qdr(struct mcfqspi *mcfqspi)
+{
+	return readw(mcfqspi->iobase + MCFQSPI_QDR);
+}
+
+static void mcfqspi_cs_select(struct mcfqspi *mcfqspi, u8 chip_select,
+			    bool cs_high)
+{
+	mcfqspi->cs_control->select(mcfqspi->cs_control, chip_select, cs_high);
+}
+
+static void mcfqspi_cs_deselect(struct mcfqspi *mcfqspi, u8 chip_select,
+				bool cs_high)
+{
+	mcfqspi->cs_control->deselect(mcfqspi->cs_control, chip_select, cs_high);
+}
+
+static int mcfqspi_cs_setup(struct mcfqspi *mcfqspi)
+{
+	return (mcfqspi->cs_control && mcfqspi->cs_control->setup) ?
+		mcfqspi->cs_control->setup(mcfqspi->cs_control) : 0;
+}
+
+static void mcfqspi_cs_teardown(struct mcfqspi *mcfqspi)
+{
+	if (mcfqspi->cs_control && mcfqspi->cs_control->teardown)
+		mcfqspi->cs_control->teardown(mcfqspi->cs_control);
+}
+
+static u8 mcfqspi_qmr_baud(u32 speed_hz)
+{
+	return clamp((MCFQSPI_BUSCLK + speed_hz - 1) / speed_hz, 2u, 255u);
+}
+
+static bool mcfqspi_qdlyr_spe(struct mcfqspi *mcfqspi)
+{
+	return mcfqspi_rd_qdlyr(mcfqspi) & MCFQSPI_QDLYR_SPE;
+}
+
+static irqreturn_t mcfqspi_irq_handler(int this_irq, void *dev_id)
+{
+	struct mcfqspi *mcfqspi = dev_id;
+
+	/* clear interrupt */
+	mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE | MCFQSPI_QIR_SPIF);
+	wake_up(&mcfqspi->waitq);
+
+	return IRQ_HANDLED;
+}
+
+static void mcfqspi_transfer_msg8(struct mcfqspi *mcfqspi, unsigned count,
+				  const u8 *txbuf, u8 *rxbuf)
+{
+	unsigned i, n, offset = 0;
+
+	n = min(count, 16u);
+
+	mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF);
+	for (i = 0; i < n; ++i)
+		mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE);
+
+	mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF);
+	if (txbuf)
+		for (i = 0; i < n; ++i)
+			mcfqspi_wr_qdr(mcfqspi, *txbuf++);
+	else
+		for (i = 0; i < count; ++i)
+			mcfqspi_wr_qdr(mcfqspi, 0);
+
+	count -= n;
+	if (count) {
+		u16 qwr = 0xf08;
+		mcfqspi_wr_qwr(mcfqspi, 0x700);
+		mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+
+		do {
+			wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+			mcfqspi_wr_qwr(mcfqspi, qwr);
+			mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+			if (rxbuf) {
+				mcfqspi_wr_qar(mcfqspi,
+					       MCFQSPI_QAR_RXBUF + offset);
+				for (i = 0; i < 8; ++i)
+					*rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+			}
+			n = min(count, 8u);
+			if (txbuf) {
+				mcfqspi_wr_qar(mcfqspi,
+					       MCFQSPI_QAR_TXBUF + offset);
+				for (i = 0; i < n; ++i)
+					mcfqspi_wr_qdr(mcfqspi, *txbuf++);
+			}
+			qwr = (offset ? 0x808 : 0) + ((n - 1) << 8);
+			offset ^= 8;
+			count -= n;
+		} while (count);
+		wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+		mcfqspi_wr_qwr(mcfqspi, qwr);
+		mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+		if (rxbuf) {
+			mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset);
+			for (i = 0; i < 8; ++i)
+				*rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+			offset ^= 8;
+		}
+	} else {
+		mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8);
+		mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+	}
+	wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+	if (rxbuf) {
+		mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset);
+		for (i = 0; i < n; ++i)
+			*rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+	}
+}
+
+static void mcfqspi_transfer_msg16(struct mcfqspi *mcfqspi, unsigned count,
+				   const u16 *txbuf, u16 *rxbuf)
+{
+	unsigned i, n, offset = 0;
+
+	n = min(count, 16u);
+
+	mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF);
+	for (i = 0; i < n; ++i)
+		mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE);
+
+	mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF);
+	if (txbuf)
+		for (i = 0; i < n; ++i)
+			mcfqspi_wr_qdr(mcfqspi, *txbuf++);
+	else
+		for (i = 0; i < count; ++i)
+			mcfqspi_wr_qdr(mcfqspi, 0);
+
+	count -= n;
+	if (count) {
+		u16 qwr = 0xf08;
+		mcfqspi_wr_qwr(mcfqspi, 0x700);
+		mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+
+		do {
+			wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+			mcfqspi_wr_qwr(mcfqspi, qwr);
+			mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+			if (rxbuf) {
+				mcfqspi_wr_qar(mcfqspi,
+					       MCFQSPI_QAR_RXBUF + offset);
+				for (i = 0; i < 8; ++i)
+					*rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+			}
+			n = min(count, 8u);
+			if (txbuf) {
+				mcfqspi_wr_qar(mcfqspi,
+					       MCFQSPI_QAR_TXBUF + offset);
+				for (i = 0; i < n; ++i)
+					mcfqspi_wr_qdr(mcfqspi, *txbuf++);
+			}
+			qwr = (offset ? 0x808 : 0x000) + ((n - 1) << 8);
+			offset ^= 8;
+			count -= n;
+		} while (count);
+		wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+		mcfqspi_wr_qwr(mcfqspi, qwr);
+		mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+		if (rxbuf) {
+			mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset);
+			for (i = 0; i < 8; ++i)
+				*rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+			offset ^= 8;
+		}
+	} else {
+		mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8);
+		mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE);
+	}
+	wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi));
+	if (rxbuf) {
+		mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset);
+		for (i = 0; i < n; ++i)
+			*rxbuf++ = mcfqspi_rd_qdr(mcfqspi);
+	}
+}
+
+static void mcfqspi_work(struct work_struct *work)
+{
+	struct mcfqspi *mcfqspi = container_of(work, struct mcfqspi, work);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mcfqspi->lock, flags);
+	while (!list_empty(&mcfqspi->msgq)) {
+		struct spi_message *msg;
+		struct spi_device *spi;
+		struct spi_transfer *xfer;
+		int status = 0;
+
+		msg = container_of(mcfqspi->msgq.next, struct spi_message,
+				   queue);
+
+		list_del_init(&mcfqspi->msgq);
+		spin_unlock_irqrestore(&mcfqspi->lock, flags);
+
+		spi = msg->spi;
+
+		list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+			bool cs_high = spi->mode & SPI_CS_HIGH;
+			u16 qmr = MCFQSPI_QMR_MSTR;
+
+			if (xfer->bits_per_word)
+				qmr |= xfer->bits_per_word << 10;
+			else
+				qmr |= spi->bits_per_word << 10;
+			if (spi->mode & SPI_CPHA)
+				qmr |= MCFQSPI_QMR_CPHA;
+			if (spi->mode & SPI_CPOL)
+				qmr |= MCFQSPI_QMR_CPOL;
+			if (xfer->speed_hz)
+				qmr |= mcfqspi_qmr_baud(xfer->speed_hz);
+			else
+				qmr |= mcfqspi_qmr_baud(spi->max_speed_hz);
+			mcfqspi_wr_qmr(mcfqspi, qmr);
+
+			mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high);
+
+			mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE);
+			if ((xfer->bits_per_word ? xfer->bits_per_word :
+						spi->bits_per_word) == 8)
+				mcfqspi_transfer_msg8(mcfqspi, xfer->len,
+						      xfer->tx_buf,
+						      xfer->rx_buf);
+			else
+				mcfqspi_transfer_msg16(mcfqspi, xfer->len / 2,
+						       xfer->tx_buf,
+						       xfer->rx_buf);
+			mcfqspi_wr_qir(mcfqspi, 0);
+
+			if (xfer->delay_usecs)
+				udelay(xfer->delay_usecs);
+			if (xfer->cs_change) {
+				if (!list_is_last(&xfer->transfer_list,
+						  &msg->transfers))
+					mcfqspi_cs_deselect(mcfqspi,
+							    spi->chip_select,
+							    cs_high);
+			} else {
+				if (list_is_last(&xfer->transfer_list,
+						 &msg->transfers))
+					mcfqspi_cs_deselect(mcfqspi,
+							    spi->chip_select,
+							    cs_high);
+			}
+			msg->actual_length += xfer->len;
+		}
+		msg->status = status;
+		msg->complete(msg->context);
+
+		spin_lock_irqsave(&mcfqspi->lock, flags);
+	}
+	spin_unlock_irqrestore(&mcfqspi->lock, flags);
+}
+
+static int mcfqspi_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct mcfqspi *mcfqspi;
+	struct spi_transfer *xfer;
+	unsigned long flags;
+
+	mcfqspi = spi_master_get_devdata(spi->master);
+
+	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+		if (xfer->bits_per_word && ((xfer->bits_per_word < 8)
+					|| (xfer->bits_per_word > 16))) {
+			dev_dbg(&spi->dev,
+				"%d bits per word is not supported\n",
+				xfer->bits_per_word);
+			goto fail;
+		}
+		if (xfer->speed_hz) {
+			u32 real_speed = MCFQSPI_BUSCLK /
+				mcfqspi_qmr_baud(xfer->speed_hz);
+			if (real_speed != xfer->speed_hz)
+				dev_dbg(&spi->dev,
+					"using speed %d instead of %d\n",
+					real_speed, xfer->speed_hz);
+		}
+	}
+	msg->status = -EINPROGRESS;
+	msg->actual_length = 0;
+
+	spin_lock_irqsave(&mcfqspi->lock, flags);
+	list_add_tail(&msg->queue, &mcfqspi->msgq);
+	queue_work(mcfqspi->workq, &mcfqspi->work);
+	spin_unlock_irqrestore(&mcfqspi->lock, flags);
+
+	return 0;
+fail:
+	msg->status = -EINVAL;
+	return -EINVAL;
+}
+
+static int mcfqspi_setup(struct spi_device *spi)
+{
+	if ((spi->bits_per_word < 8) || (spi->bits_per_word > 16)) {
+		dev_dbg(&spi->dev, "%d bits per word is not supported\n",
+			spi->bits_per_word);
+		return -EINVAL;
+	}
+	if (spi->chip_select >= spi->master->num_chipselect) {
+		dev_dbg(&spi->dev, "%d chip select is out of range\n",
+			spi->chip_select);
+		return -EINVAL;
+	}
+
+	mcfqspi_cs_deselect(spi_master_get_devdata(spi->master),
+			    spi->chip_select, spi->mode & SPI_CS_HIGH);
+
+	dev_dbg(&spi->dev,
+			"bits per word %d, chip select %d, speed %d KHz\n",
+			spi->bits_per_word, spi->chip_select,
+			(MCFQSPI_BUSCLK / mcfqspi_qmr_baud(spi->max_speed_hz))
+			/ 1000);
+
+	return 0;
+}
+
+static int __devinit mcfqspi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct mcfqspi *mcfqspi;
+	struct resource *res;
+	struct mcfqspi_platform_data *pdata;
+	int status;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*mcfqspi));
+	if (master == NULL) {
+		dev_dbg(&pdev->dev, "spi_alloc_master failed\n");
+		return -ENOMEM;
+	}
+
+	mcfqspi = spi_master_get_devdata(master);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_dbg(&pdev->dev, "platform_get_resource failed\n");
+		status = -ENXIO;
+		goto fail0;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		dev_dbg(&pdev->dev, "request_mem_region failed\n");
+		status = -EBUSY;
+		goto fail0;
+	}
+
+	mcfqspi->iobase = ioremap(res->start, resource_size(res));
+	if (!mcfqspi->iobase) {
+		dev_dbg(&pdev->dev, "ioremap failed\n");
+		status = -ENOMEM;
+		goto fail1;
+	}
+
+	mcfqspi->irq = platform_get_irq(pdev, 0);
+	if (mcfqspi->irq < 0) {
+		dev_dbg(&pdev->dev, "platform_get_irq failed\n");
+		status = -ENXIO;
+		goto fail2;
+	}
+
+	status = request_irq(mcfqspi->irq, mcfqspi_irq_handler, IRQF_DISABLED,
+			     pdev->name, mcfqspi);
+	if (status) {
+		dev_dbg(&pdev->dev, "request_irq failed\n");
+		goto fail2;
+	}
+
+	mcfqspi->clk = clk_get(&pdev->dev, "qspi_clk");
+	if (IS_ERR(mcfqspi->clk)) {
+		dev_dbg(&pdev->dev, "clk_get failed\n");
+		status = PTR_ERR(mcfqspi->clk);
+		goto fail3;
+	}
+	clk_enable(mcfqspi->clk);
+
+	mcfqspi->workq = create_singlethread_workqueue(dev_name(master->dev.parent));
+	if (!mcfqspi->workq) {
+		dev_dbg(&pdev->dev, "create_workqueue failed\n");
+		status = -ENOMEM;
+		goto fail4;
+	}
+	INIT_WORK(&mcfqspi->work, mcfqspi_work);
+	spin_lock_init(&mcfqspi->lock);
+	INIT_LIST_HEAD(&mcfqspi->msgq);
+	init_waitqueue_head(&mcfqspi->waitq);
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_dbg(&pdev->dev, "platform data is missing\n");
+		goto fail5;
+	}
+	master->bus_num = pdata->bus_num;
+	master->num_chipselect = pdata->num_chipselect;
+
+	mcfqspi->cs_control = pdata->cs_control;
+	status = mcfqspi_cs_setup(mcfqspi);
+	if (status) {
+		dev_dbg(&pdev->dev, "error initializing cs_control\n");
+		goto fail5;
+	}
+
+	master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA;
+	master->setup = mcfqspi_setup;
+	master->transfer = mcfqspi_transfer;
+
+	platform_set_drvdata(pdev, master);
+
+	status = spi_register_master(master);
+	if (status) {
+		dev_dbg(&pdev->dev, "spi_register_master failed\n");
+		goto fail6;
+	}
+	dev_info(&pdev->dev, "Coldfire QSPI bus driver\n");
+
+	return 0;
+
+fail6:
+	mcfqspi_cs_teardown(mcfqspi);
+fail5:
+	destroy_workqueue(mcfqspi->workq);
+fail4:
+	clk_disable(mcfqspi->clk);
+	clk_put(mcfqspi->clk);
+fail3:
+	free_irq(mcfqspi->irq, mcfqspi);
+fail2:
+	iounmap(mcfqspi->iobase);
+fail1:
+	release_mem_region(res->start, resource_size(res));
+fail0:
+	spi_master_put(master);
+
+	dev_dbg(&pdev->dev, "Coldfire QSPI probe failed\n");
+
+	return status;
+}
+
+static int __devexit mcfqspi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct mcfqspi *mcfqspi = spi_master_get_devdata(master);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	/* disable the hardware (set the baud rate to 0) */
+	mcfqspi_wr_qmr(mcfqspi, MCFQSPI_QMR_MSTR);
+
+	platform_set_drvdata(pdev, NULL);
+	mcfqspi_cs_teardown(mcfqspi);
+	destroy_workqueue(mcfqspi->workq);
+	clk_disable(mcfqspi->clk);
+	clk_put(mcfqspi->clk);
+	free_irq(mcfqspi->irq, mcfqspi);
+	iounmap(mcfqspi->iobase);
+	release_mem_region(res->start, resource_size(res));
+	spi_unregister_master(master);
+	spi_master_put(master);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int mcfqspi_suspend(struct device *dev)
+{
+	struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev));
+
+	clk_disable(mcfqspi->clk);
+
+	return 0;
+}
+
+static int mcfqspi_resume(struct device *dev)
+{
+	struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev));
+
+	clk_enable(mcfqspi->clk);
+
+	return 0;
+}
+
+static struct dev_pm_ops mcfqspi_dev_pm_ops = {
+	.suspend	= mcfqspi_suspend,
+	.resume		= mcfqspi_resume,
+};
+
+#define	MCFQSPI_DEV_PM_OPS	(&mcfqspi_dev_pm_ops)
+#else
+#define	MCFQSPI_DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver mcfqspi_driver = {
+	.driver.name	= DRIVER_NAME,
+	.driver.owner	= THIS_MODULE,
+	.driver.pm	= MCFQSPI_DEV_PM_OPS,
+	.remove		= __devexit_p(mcfqspi_remove),
+};
+
+static int __init mcfqspi_init(void)
+{
+	return platform_driver_probe(&mcfqspi_driver, mcfqspi_probe);
+}
+module_init(mcfqspi_init);
+
+static void __exit mcfqspi_exit(void)
+{
+	platform_driver_unregister(&mcfqspi_driver);
+}
+module_exit(mcfqspi_exit);
+
+MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
+MODULE_DESCRIPTION("Coldfire QSPI Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
new file mode 100644
index 0000000..225ab60
--- /dev/null
+++ b/drivers/spi/davinci_spi.c
@@ -0,0 +1,1255 @@
+/*
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <mach/spi.h>
+#include <mach/edma.h>
+
+#define SPI_NO_RESOURCE		((resource_size_t)-1)
+
+#define SPI_MAX_CHIPSELECT	2
+
+#define CS_DEFAULT	0xFF
+
+#define SPI_BUFSIZ	(SMP_CACHE_BYTES + 1)
+#define DAVINCI_DMA_DATA_TYPE_S8	0x01
+#define DAVINCI_DMA_DATA_TYPE_S16	0x02
+#define DAVINCI_DMA_DATA_TYPE_S32	0x04
+
+#define SPIFMT_PHASE_MASK	BIT(16)
+#define SPIFMT_POLARITY_MASK	BIT(17)
+#define SPIFMT_DISTIMER_MASK	BIT(18)
+#define SPIFMT_SHIFTDIR_MASK	BIT(20)
+#define SPIFMT_WAITENA_MASK	BIT(21)
+#define SPIFMT_PARITYENA_MASK	BIT(22)
+#define SPIFMT_ODD_PARITY_MASK	BIT(23)
+#define SPIFMT_WDELAY_MASK	0x3f000000u
+#define SPIFMT_WDELAY_SHIFT	24
+#define SPIFMT_CHARLEN_MASK	0x0000001Fu
+
+/* SPIGCR1 */
+#define SPIGCR1_SPIENA_MASK	0x01000000u
+
+/* SPIPC0 */
+#define SPIPC0_DIFUN_MASK	BIT(11)		/* MISO */
+#define SPIPC0_DOFUN_MASK	BIT(10)		/* MOSI */
+#define SPIPC0_CLKFUN_MASK	BIT(9)		/* CLK */
+#define SPIPC0_SPIENA_MASK	BIT(8)		/* nREADY */
+#define SPIPC0_EN1FUN_MASK	BIT(1)
+#define SPIPC0_EN0FUN_MASK	BIT(0)
+
+#define SPIINT_MASKALL		0x0101035F
+#define SPI_INTLVL_1		0x000001FFu
+#define SPI_INTLVL_0		0x00000000u
+
+/* SPIDAT1 */
+#define SPIDAT1_CSHOLD_SHIFT	28
+#define SPIDAT1_CSNR_SHIFT	16
+#define SPIGCR1_CLKMOD_MASK	BIT(1)
+#define SPIGCR1_MASTER_MASK     BIT(0)
+#define SPIGCR1_LOOPBACK_MASK	BIT(16)
+
+/* SPIBUF */
+#define SPIBUF_TXFULL_MASK	BIT(29)
+#define SPIBUF_RXEMPTY_MASK	BIT(31)
+
+/* Error Masks */
+#define SPIFLG_DLEN_ERR_MASK		BIT(0)
+#define SPIFLG_TIMEOUT_MASK		BIT(1)
+#define SPIFLG_PARERR_MASK		BIT(2)
+#define SPIFLG_DESYNC_MASK		BIT(3)
+#define SPIFLG_BITERR_MASK		BIT(4)
+#define SPIFLG_OVRRUN_MASK		BIT(6)
+#define SPIFLG_RX_INTR_MASK		BIT(8)
+#define SPIFLG_TX_INTR_MASK		BIT(9)
+#define SPIFLG_BUF_INIT_ACTIVE_MASK	BIT(24)
+#define SPIFLG_MASK			(SPIFLG_DLEN_ERR_MASK \
+				| SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \
+				| SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \
+				| SPIFLG_OVRRUN_MASK | SPIFLG_RX_INTR_MASK \
+				| SPIFLG_TX_INTR_MASK \
+				| SPIFLG_BUF_INIT_ACTIVE_MASK)
+
+#define SPIINT_DLEN_ERR_INTR	BIT(0)
+#define SPIINT_TIMEOUT_INTR	BIT(1)
+#define SPIINT_PARERR_INTR	BIT(2)
+#define SPIINT_DESYNC_INTR	BIT(3)
+#define SPIINT_BITERR_INTR	BIT(4)
+#define SPIINT_OVRRUN_INTR	BIT(6)
+#define SPIINT_RX_INTR		BIT(8)
+#define SPIINT_TX_INTR		BIT(9)
+#define SPIINT_DMA_REQ_EN	BIT(16)
+#define SPIINT_ENABLE_HIGHZ	BIT(24)
+
+#define SPI_T2CDELAY_SHIFT	16
+#define SPI_C2TDELAY_SHIFT	24
+
+/* SPI Controller registers */
+#define SPIGCR0		0x00
+#define SPIGCR1		0x04
+#define SPIINT		0x08
+#define SPILVL		0x0c
+#define SPIFLG		0x10
+#define SPIPC0		0x14
+#define SPIPC1		0x18
+#define SPIPC2		0x1c
+#define SPIPC3		0x20
+#define SPIPC4		0x24
+#define SPIPC5		0x28
+#define SPIPC6		0x2c
+#define SPIPC7		0x30
+#define SPIPC8		0x34
+#define SPIDAT0		0x38
+#define SPIDAT1		0x3c
+#define SPIBUF		0x40
+#define SPIEMU		0x44
+#define SPIDELAY	0x48
+#define SPIDEF		0x4c
+#define SPIFMT0		0x50
+#define SPIFMT1		0x54
+#define SPIFMT2		0x58
+#define SPIFMT3		0x5c
+#define TGINTVEC0	0x60
+#define TGINTVEC1	0x64
+
+struct davinci_spi_slave {
+	u32	cmd_to_write;
+	u32	clk_ctrl_to_write;
+	u32	bytes_per_word;
+	u8	active_cs;
+};
+
+/* We have 2 DMA channels per CS, one for RX and one for TX */
+struct davinci_spi_dma {
+	int			dma_tx_channel;
+	int			dma_rx_channel;
+	int			dma_tx_sync_dev;
+	int			dma_rx_sync_dev;
+	enum dma_event_q	eventq;
+
+	struct completion	dma_tx_completion;
+	struct completion	dma_rx_completion;
+};
+
+/* SPI Controller driver's private data. */
+struct davinci_spi {
+	struct spi_bitbang	bitbang;
+	struct clk		*clk;
+
+	u8			version;
+	resource_size_t		pbase;
+	void __iomem		*base;
+	size_t			region_size;
+	u32			irq;
+	struct completion	done;
+
+	const void		*tx;
+	void			*rx;
+	u8			*tmp_buf;
+	int			count;
+	struct davinci_spi_dma	*dma_channels;
+	struct			davinci_spi_platform_data *pdata;
+
+	void			(*get_rx)(u32 rx_data, struct davinci_spi *);
+	u32			(*get_tx)(struct davinci_spi *);
+
+	struct davinci_spi_slave slave[SPI_MAX_CHIPSELECT];
+};
+
+static unsigned use_dma;
+
+static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi)
+{
+	u8 *rx = davinci_spi->rx;
+
+	*rx++ = (u8)data;
+	davinci_spi->rx = rx;
+}
+
+static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi)
+{
+	u16 *rx = davinci_spi->rx;
+
+	*rx++ = (u16)data;
+	davinci_spi->rx = rx;
+}
+
+static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi)
+{
+	u32 data;
+	const u8 *tx = davinci_spi->tx;
+
+	data = *tx++;
+	davinci_spi->tx = tx;
+	return data;
+}
+
+static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi)
+{
+	u32 data;
+	const u16 *tx = davinci_spi->tx;
+
+	data = *tx++;
+	davinci_spi->tx = tx;
+	return data;
+}
+
+static inline void set_io_bits(void __iomem *addr, u32 bits)
+{
+	u32 v = ioread32(addr);
+
+	v |= bits;
+	iowrite32(v, addr);
+}
+
+static inline void clear_io_bits(void __iomem *addr, u32 bits)
+{
+	u32 v = ioread32(addr);
+
+	v &= ~bits;
+	iowrite32(v, addr);
+}
+
+static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
+{
+	set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
+}
+
+static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
+{
+	clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
+}
+
+static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable)
+{
+	struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
+
+	if (enable)
+		set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
+	else
+		clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
+}
+
+/*
+ * Interface to control the chip select signal
+ */
+static void davinci_spi_chipselect(struct spi_device *spi, int value)
+{
+	struct davinci_spi *davinci_spi;
+	struct davinci_spi_platform_data *pdata;
+	u32 data1_reg_val = 0;
+
+	davinci_spi = spi_master_get_devdata(spi->master);
+	pdata = davinci_spi->pdata;
+
+	/*
+	 * Board specific chip select logic decides the polarity and cs
+	 * line for the controller
+	 */
+	if (value == BITBANG_CS_INACTIVE) {
+		set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT);
+
+		data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT;
+		iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+
+		while ((ioread32(davinci_spi->base + SPIBUF)
+					& SPIBUF_RXEMPTY_MASK) == 0)
+			cpu_relax();
+	}
+}
+
+/**
+ * davinci_spi_setup_transfer - This functions will determine transfer method
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function determines data transfer method (8/16/32 bit transfer).
+ * It will also set the SPI Clock Control register according to
+ * SPI slave device freq.
+ */
+static int davinci_spi_setup_transfer(struct spi_device *spi,
+		struct spi_transfer *t)
+{
+
+	struct davinci_spi *davinci_spi;
+	struct davinci_spi_platform_data *pdata;
+	u8 bits_per_word = 0;
+	u32 hz = 0, prescale;
+
+	davinci_spi = spi_master_get_devdata(spi->master);
+	pdata = davinci_spi->pdata;
+
+	if (t) {
+		bits_per_word = t->bits_per_word;
+		hz = t->speed_hz;
+	}
+
+	/* if bits_per_word is not set then set it default */
+	if (!bits_per_word)
+		bits_per_word = spi->bits_per_word;
+
+	/*
+	 * Assign function pointer to appropriate transfer method
+	 * 8bit, 16bit or 32bit transfer
+	 */
+	if (bits_per_word <= 8 && bits_per_word >= 2) {
+		davinci_spi->get_rx = davinci_spi_rx_buf_u8;
+		davinci_spi->get_tx = davinci_spi_tx_buf_u8;
+		davinci_spi->slave[spi->chip_select].bytes_per_word = 1;
+	} else if (bits_per_word <= 16 && bits_per_word >= 2) {
+		davinci_spi->get_rx = davinci_spi_rx_buf_u16;
+		davinci_spi->get_tx = davinci_spi_tx_buf_u16;
+		davinci_spi->slave[spi->chip_select].bytes_per_word = 2;
+	} else
+		return -EINVAL;
+
+	if (!hz)
+		hz = spi->max_speed_hz;
+
+	clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK,
+			spi->chip_select);
+	set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f,
+			spi->chip_select);
+
+	prescale = ((clk_get_rate(davinci_spi->clk) / hz) - 1) & 0xff;
+
+	clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select);
+	set_fmt_bits(davinci_spi->base, prescale << 8, spi->chip_select);
+
+	return 0;
+}
+
+static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data)
+{
+	struct spi_device *spi = (struct spi_device *)data;
+	struct davinci_spi *davinci_spi;
+	struct davinci_spi_dma *davinci_spi_dma;
+	struct davinci_spi_platform_data *pdata;
+
+	davinci_spi = spi_master_get_devdata(spi->master);
+	davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]);
+	pdata = davinci_spi->pdata;
+
+	if (ch_status == DMA_COMPLETE)
+		edma_stop(davinci_spi_dma->dma_rx_channel);
+	else
+		edma_clean_channel(davinci_spi_dma->dma_rx_channel);
+
+	complete(&davinci_spi_dma->dma_rx_completion);
+	/* We must disable the DMA RX request */
+	davinci_spi_set_dma_req(spi, 0);
+}
+
+static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data)
+{
+	struct spi_device *spi = (struct spi_device *)data;
+	struct davinci_spi *davinci_spi;
+	struct davinci_spi_dma *davinci_spi_dma;
+	struct davinci_spi_platform_data *pdata;
+
+	davinci_spi = spi_master_get_devdata(spi->master);
+	davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]);
+	pdata = davinci_spi->pdata;
+
+	if (ch_status == DMA_COMPLETE)
+		edma_stop(davinci_spi_dma->dma_tx_channel);
+	else
+		edma_clean_channel(davinci_spi_dma->dma_tx_channel);
+
+	complete(&davinci_spi_dma->dma_tx_completion);
+	/* We must disable the DMA TX request */
+	davinci_spi_set_dma_req(spi, 0);
+}
+
+static int davinci_spi_request_dma(struct spi_device *spi)
+{
+	struct davinci_spi *davinci_spi;
+	struct davinci_spi_dma *davinci_spi_dma;
+	struct davinci_spi_platform_data *pdata;
+	struct device *sdev;
+	int r;
+
+	davinci_spi = spi_master_get_devdata(spi->master);
+	davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+	pdata = davinci_spi->pdata;
+	sdev = davinci_spi->bitbang.master->dev.parent;
+
+	r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev,
+				davinci_spi_dma_rx_callback, spi,
+				davinci_spi_dma->eventq);
+	if (r < 0) {
+		dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n");
+		return -EAGAIN;
+	}
+	davinci_spi_dma->dma_rx_channel = r;
+	r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev,
+				davinci_spi_dma_tx_callback, spi,
+				davinci_spi_dma->eventq);
+	if (r < 0) {
+		edma_free_channel(davinci_spi_dma->dma_rx_channel);
+		davinci_spi_dma->dma_rx_channel = -1;
+		dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n");
+		return -EAGAIN;
+	}
+	davinci_spi_dma->dma_tx_channel = r;
+
+	return 0;
+}
+
+/**
+ * davinci_spi_setup - This functions will set default transfer method
+ * @spi: spi device on which data transfer to be done
+ *
+ * This functions sets the default transfer method.
+ */
+
+static int davinci_spi_setup(struct spi_device *spi)
+{
+	int retval;
+	struct davinci_spi *davinci_spi;
+	struct davinci_spi_dma *davinci_spi_dma;
+	struct device *sdev;
+
+	davinci_spi = spi_master_get_devdata(spi->master);
+	sdev = davinci_spi->bitbang.master->dev.parent;
+
+	/* if bits per word length is zero then set it default 8 */
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	davinci_spi->slave[spi->chip_select].cmd_to_write = 0;
+
+	if (use_dma && davinci_spi->dma_channels) {
+		davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+
+		if ((davinci_spi_dma->dma_rx_channel == -1)
+				|| (davinci_spi_dma->dma_tx_channel == -1)) {
+			retval = davinci_spi_request_dma(spi);
+			if (retval < 0)
+				return retval;
+		}
+	}
+
+	/*
+	 * SPI in DaVinci and DA8xx operate between
+	 * 600 KHz and 50 MHz
+	 */
+	if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000) {
+		dev_dbg(sdev, "Operating frequency is not in acceptable "
+				"range\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Set up SPIFMTn register, unique to this chipselect.
+	 *
+	 * NOTE: we could do all of these with one write.  Also, some
+	 * of the "version 2" features are found in chips that don't
+	 * support all of them...
+	 */
+	if (spi->mode & SPI_LSB_FIRST)
+		set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
+				spi->chip_select);
+	else
+		clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
+				spi->chip_select);
+
+	if (spi->mode & SPI_CPOL)
+		set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
+				spi->chip_select);
+	else
+		clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
+				spi->chip_select);
+
+	if (!(spi->mode & SPI_CPHA))
+		set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
+				spi->chip_select);
+	else
+		clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
+				spi->chip_select);
+
+	/*
+	 * Version 1 hardware supports two basic SPI modes:
+	 *  - Standard SPI mode uses 4 pins, with chipselect
+	 *  - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
+	 *	(distinct from SPI_3WIRE, with just one data wire;
+	 *	or similar variants without MOSI or without MISO)
+	 *
+	 * Version 2 hardware supports an optional handshaking signal,
+	 * so it can support two more modes:
+	 *  - 5 pin SPI variant is standard SPI plus SPI_READY
+	 *  - 4 pin with enable is (SPI_READY | SPI_NO_CS)
+	 */
+
+	if (davinci_spi->version == SPI_VERSION_2) {
+		clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK,
+				spi->chip_select);
+		set_fmt_bits(davinci_spi->base,
+				(davinci_spi->pdata->wdelay
+						<< SPIFMT_WDELAY_SHIFT)
+					& SPIFMT_WDELAY_MASK,
+				spi->chip_select);
+
+		if (davinci_spi->pdata->odd_parity)
+			set_fmt_bits(davinci_spi->base,
+					SPIFMT_ODD_PARITY_MASK,
+					spi->chip_select);
+		else
+			clear_fmt_bits(davinci_spi->base,
+					SPIFMT_ODD_PARITY_MASK,
+					spi->chip_select);
+
+		if (davinci_spi->pdata->parity_enable)
+			set_fmt_bits(davinci_spi->base,
+					SPIFMT_PARITYENA_MASK,
+					spi->chip_select);
+		else
+			clear_fmt_bits(davinci_spi->base,
+					SPIFMT_PARITYENA_MASK,
+					spi->chip_select);
+
+		if (davinci_spi->pdata->wait_enable)
+			set_fmt_bits(davinci_spi->base,
+					SPIFMT_WAITENA_MASK,
+					spi->chip_select);
+		else
+			clear_fmt_bits(davinci_spi->base,
+					SPIFMT_WAITENA_MASK,
+					spi->chip_select);
+
+		if (davinci_spi->pdata->timer_disable)
+			set_fmt_bits(davinci_spi->base,
+					SPIFMT_DISTIMER_MASK,
+					spi->chip_select);
+		else
+			clear_fmt_bits(davinci_spi->base,
+					SPIFMT_DISTIMER_MASK,
+					spi->chip_select);
+	}
+
+	retval = davinci_spi_setup_transfer(spi, NULL);
+
+	return retval;
+}
+
+static void davinci_spi_cleanup(struct spi_device *spi)
+{
+	struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
+	struct davinci_spi_dma *davinci_spi_dma;
+
+	davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+
+	if (use_dma && davinci_spi->dma_channels) {
+		davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+
+		if ((davinci_spi_dma->dma_rx_channel != -1)
+				&& (davinci_spi_dma->dma_tx_channel != -1)) {
+			edma_free_channel(davinci_spi_dma->dma_tx_channel);
+			edma_free_channel(davinci_spi_dma->dma_rx_channel);
+		}
+	}
+}
+
+static int davinci_spi_bufs_prep(struct spi_device *spi,
+				 struct davinci_spi *davinci_spi)
+{
+	int op_mode = 0;
+
+	/*
+	 * REVISIT  unless devices disagree about SPI_LOOP or
+	 * SPI_READY (SPI_NO_CS only allows one device!), this
+	 * should not need to be done before each message...
+	 * optimize for both flags staying cleared.
+	 */
+
+	op_mode = SPIPC0_DIFUN_MASK
+		| SPIPC0_DOFUN_MASK
+		| SPIPC0_CLKFUN_MASK;
+	if (!(spi->mode & SPI_NO_CS))
+		op_mode |= 1 << spi->chip_select;
+	if (spi->mode & SPI_READY)
+		op_mode |= SPIPC0_SPIENA_MASK;
+
+	iowrite32(op_mode, davinci_spi->base + SPIPC0);
+
+	if (spi->mode & SPI_LOOP)
+		set_io_bits(davinci_spi->base + SPIGCR1,
+				SPIGCR1_LOOPBACK_MASK);
+	else
+		clear_io_bits(davinci_spi->base + SPIGCR1,
+				SPIGCR1_LOOPBACK_MASK);
+
+	return 0;
+}
+
+static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
+				   int int_status)
+{
+	struct device *sdev = davinci_spi->bitbang.master->dev.parent;
+
+	if (int_status & SPIFLG_TIMEOUT_MASK) {
+		dev_dbg(sdev, "SPI Time-out Error\n");
+		return -ETIMEDOUT;
+	}
+	if (int_status & SPIFLG_DESYNC_MASK) {
+		dev_dbg(sdev, "SPI Desynchronization Error\n");
+		return -EIO;
+	}
+	if (int_status & SPIFLG_BITERR_MASK) {
+		dev_dbg(sdev, "SPI Bit error\n");
+		return -EIO;
+	}
+
+	if (davinci_spi->version == SPI_VERSION_2) {
+		if (int_status & SPIFLG_DLEN_ERR_MASK) {
+			dev_dbg(sdev, "SPI Data Length Error\n");
+			return -EIO;
+		}
+		if (int_status & SPIFLG_PARERR_MASK) {
+			dev_dbg(sdev, "SPI Parity Error\n");
+			return -EIO;
+		}
+		if (int_status & SPIFLG_OVRRUN_MASK) {
+			dev_dbg(sdev, "SPI Data Overrun error\n");
+			return -EIO;
+		}
+		if (int_status & SPIFLG_TX_INTR_MASK) {
+			dev_dbg(sdev, "SPI TX intr bit set\n");
+			return -EIO;
+		}
+		if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
+			dev_dbg(sdev, "SPI Buffer Init Active\n");
+			return -EBUSY;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * davinci_spi_bufs - functions which will handle transfer data
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function will put data to be transferred into data register
+ * of SPI controller and then wait until the completion will be marked
+ * by the IRQ Handler.
+ */
+static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct davinci_spi *davinci_spi;
+	int int_status, count, ret;
+	u8 conv, tmp;
+	u32 tx_data, data1_reg_val;
+	u32 buf_val, flg_val;
+	struct davinci_spi_platform_data *pdata;
+
+	davinci_spi = spi_master_get_devdata(spi->master);
+	pdata = davinci_spi->pdata;
+
+	davinci_spi->tx = t->tx_buf;
+	davinci_spi->rx = t->rx_buf;
+
+	/* convert len to words based on bits_per_word */
+	conv = davinci_spi->slave[spi->chip_select].bytes_per_word;
+	davinci_spi->count = t->len / conv;
+
+	INIT_COMPLETION(davinci_spi->done);
+
+	ret = davinci_spi_bufs_prep(spi, davinci_spi);
+	if (ret)
+		return ret;
+
+	/* Enable SPI */
+	set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+
+	iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) |
+			(pdata->t2cdelay << SPI_T2CDELAY_SHIFT),
+			davinci_spi->base + SPIDELAY);
+
+	count = davinci_spi->count;
+	data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT;
+	tmp = ~(0x1 << spi->chip_select);
+
+	clear_io_bits(davinci_spi->base + SPIDEF, ~tmp);
+
+	data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT;
+
+	while ((ioread32(davinci_spi->base + SPIBUF)
+				& SPIBUF_RXEMPTY_MASK) == 0)
+		cpu_relax();
+
+	/* Determine the command to execute READ or WRITE */
+	if (t->tx_buf) {
+		clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
+
+		while (1) {
+			tx_data = davinci_spi->get_tx(davinci_spi);
+
+			data1_reg_val &= ~(0xFFFF);
+			data1_reg_val |= (0xFFFF & tx_data);
+
+			buf_val = ioread32(davinci_spi->base + SPIBUF);
+			if ((buf_val & SPIBUF_TXFULL_MASK) == 0) {
+				iowrite32(data1_reg_val,
+						davinci_spi->base + SPIDAT1);
+
+				count--;
+			}
+			while (ioread32(davinci_spi->base + SPIBUF)
+					& SPIBUF_RXEMPTY_MASK)
+				cpu_relax();
+
+			/* getting the returned byte */
+			if (t->rx_buf) {
+				buf_val = ioread32(davinci_spi->base + SPIBUF);
+				davinci_spi->get_rx(buf_val, davinci_spi);
+			}
+			if (count <= 0)
+				break;
+		}
+	} else {
+		if (pdata->poll_mode) {
+			while (1) {
+				/* keeps the serial clock going */
+				if ((ioread32(davinci_spi->base + SPIBUF)
+						& SPIBUF_TXFULL_MASK) == 0)
+					iowrite32(data1_reg_val,
+						davinci_spi->base + SPIDAT1);
+
+				while (ioread32(davinci_spi->base + SPIBUF) &
+						SPIBUF_RXEMPTY_MASK)
+					cpu_relax();
+
+				flg_val = ioread32(davinci_spi->base + SPIFLG);
+				buf_val = ioread32(davinci_spi->base + SPIBUF);
+
+				davinci_spi->get_rx(buf_val, davinci_spi);
+
+				count--;
+				if (count <= 0)
+					break;
+			}
+		} else {	/* Receive in Interrupt mode */
+			int i;
+
+			for (i = 0; i < davinci_spi->count; i++) {
+				set_io_bits(davinci_spi->base + SPIINT,
+						SPIINT_BITERR_INTR
+						| SPIINT_OVRRUN_INTR
+						| SPIINT_RX_INTR);
+
+				iowrite32(data1_reg_val,
+						davinci_spi->base + SPIDAT1);
+
+				while (ioread32(davinci_spi->base + SPIINT) &
+						SPIINT_RX_INTR)
+					cpu_relax();
+			}
+			iowrite32((data1_reg_val & 0x0ffcffff),
+					davinci_spi->base + SPIDAT1);
+		}
+	}
+
+	/*
+	 * Check for bit error, desync error,parity error,timeout error and
+	 * receive overflow errors
+	 */
+	int_status = ioread32(davinci_spi->base + SPIFLG);
+
+	ret = davinci_spi_check_error(davinci_spi, int_status);
+	if (ret != 0)
+		return ret;
+
+	/* SPI Framework maintains the count only in bytes so convert back */
+	davinci_spi->count *= conv;
+
+	return t->len;
+}
+
+#define DAVINCI_DMA_DATA_TYPE_S8	0x01
+#define DAVINCI_DMA_DATA_TYPE_S16	0x02
+#define DAVINCI_DMA_DATA_TYPE_S32	0x04
+
+static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct davinci_spi *davinci_spi;
+	int int_status = 0;
+	int count, temp_count;
+	u8 conv = 1;
+	u8 tmp;
+	u32 data1_reg_val;
+	struct davinci_spi_dma *davinci_spi_dma;
+	int word_len, data_type, ret;
+	unsigned long tx_reg, rx_reg;
+	struct davinci_spi_platform_data *pdata;
+	struct device *sdev;
+
+	davinci_spi = spi_master_get_devdata(spi->master);
+	pdata = davinci_spi->pdata;
+	sdev = davinci_spi->bitbang.master->dev.parent;
+
+	davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
+
+	tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1;
+	rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF;
+
+	davinci_spi->tx = t->tx_buf;
+	davinci_spi->rx = t->rx_buf;
+
+	/* convert len to words based on bits_per_word */
+	conv = davinci_spi->slave[spi->chip_select].bytes_per_word;
+	davinci_spi->count = t->len / conv;
+
+	INIT_COMPLETION(davinci_spi->done);
+
+	init_completion(&davinci_spi_dma->dma_rx_completion);
+	init_completion(&davinci_spi_dma->dma_tx_completion);
+
+	word_len = conv * 8;
+
+	if (word_len <= 8)
+		data_type = DAVINCI_DMA_DATA_TYPE_S8;
+	else if (word_len <= 16)
+		data_type = DAVINCI_DMA_DATA_TYPE_S16;
+	else if (word_len <= 32)
+		data_type = DAVINCI_DMA_DATA_TYPE_S32;
+	else
+		return -EINVAL;
+
+	ret = davinci_spi_bufs_prep(spi, davinci_spi);
+	if (ret)
+		return ret;
+
+	/* Put delay val if required */
+	iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) |
+			(pdata->t2cdelay << SPI_T2CDELAY_SHIFT),
+			davinci_spi->base + SPIDELAY);
+
+	count = davinci_spi->count;	/* the number of elements */
+	data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT;
+
+	/* CS default = 0xFF */
+	tmp = ~(0x1 << spi->chip_select);
+
+	clear_io_bits(davinci_spi->base + SPIDEF, ~tmp);
+
+	data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT;
+
+	/* disable all interrupts for dma transfers */
+	clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
+	/* Disable SPI to write configuration bits in SPIDAT */
+	clear_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+	iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+	/* Enable SPI */
+	set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+
+	while ((ioread32(davinci_spi->base + SPIBUF)
+				& SPIBUF_RXEMPTY_MASK) == 0)
+		cpu_relax();
+
+
+	if (t->tx_buf) {
+		t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count,
+				DMA_TO_DEVICE);
+		if (dma_mapping_error(&spi->dev, t->tx_dma)) {
+			dev_dbg(sdev, "Unable to DMA map a %d bytes"
+				" TX buffer\n", count);
+			return -ENOMEM;
+		}
+		temp_count = count;
+	} else {
+		/* We need TX clocking for RX transaction */
+		t->tx_dma = dma_map_single(&spi->dev,
+				(void *)davinci_spi->tmp_buf, count + 1,
+				DMA_TO_DEVICE);
+		if (dma_mapping_error(&spi->dev, t->tx_dma)) {
+			dev_dbg(sdev, "Unable to DMA map a %d bytes"
+				" TX tmp buffer\n", count);
+			return -ENOMEM;
+		}
+		temp_count = count + 1;
+	}
+
+	edma_set_transfer_params(davinci_spi_dma->dma_tx_channel,
+					data_type, temp_count, 1, 0, ASYNC);
+	edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT);
+	edma_set_src(davinci_spi_dma->dma_tx_channel, t->tx_dma, INCR, W8BIT);
+	edma_set_src_index(davinci_spi_dma->dma_tx_channel, data_type, 0);
+	edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0);
+
+	if (t->rx_buf) {
+		/* initiate transaction */
+		iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+
+		t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count,
+				DMA_FROM_DEVICE);
+		if (dma_mapping_error(&spi->dev, t->rx_dma)) {
+			dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n",
+					count);
+			if (t->tx_buf != NULL)
+				dma_unmap_single(NULL, t->tx_dma,
+						 count, DMA_TO_DEVICE);
+			return -ENOMEM;
+		}
+		edma_set_transfer_params(davinci_spi_dma->dma_rx_channel,
+				data_type, count, 1, 0, ASYNC);
+		edma_set_src(davinci_spi_dma->dma_rx_channel,
+				rx_reg, INCR, W8BIT);
+		edma_set_dest(davinci_spi_dma->dma_rx_channel,
+				t->rx_dma, INCR, W8BIT);
+		edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0);
+		edma_set_dest_index(davinci_spi_dma->dma_rx_channel,
+				data_type, 0);
+	}
+
+	if ((t->tx_buf) || (t->rx_buf))
+		edma_start(davinci_spi_dma->dma_tx_channel);
+
+	if (t->rx_buf)
+		edma_start(davinci_spi_dma->dma_rx_channel);
+
+	if ((t->rx_buf) || (t->tx_buf))
+		davinci_spi_set_dma_req(spi, 1);
+
+	if (t->tx_buf)
+		wait_for_completion_interruptible(
+				&davinci_spi_dma->dma_tx_completion);
+
+	if (t->rx_buf)
+		wait_for_completion_interruptible(
+				&davinci_spi_dma->dma_rx_completion);
+
+	dma_unmap_single(NULL, t->tx_dma, temp_count, DMA_TO_DEVICE);
+
+	if (t->rx_buf)
+		dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE);
+
+	/*
+	 * Check for bit error, desync error,parity error,timeout error and
+	 * receive overflow errors
+	 */
+	int_status = ioread32(davinci_spi->base + SPIFLG);
+
+	ret = davinci_spi_check_error(davinci_spi, int_status);
+	if (ret != 0)
+		return ret;
+
+	/* SPI Framework maintains the count only in bytes so convert back */
+	davinci_spi->count *= conv;
+
+	return t->len;
+}
+
+/**
+ * davinci_spi_irq - IRQ handler for DaVinci SPI
+ * @irq: IRQ number for this SPI Master
+ * @context_data: structure for SPI Master controller davinci_spi
+ */
+static irqreturn_t davinci_spi_irq(s32 irq, void *context_data)
+{
+	struct davinci_spi *davinci_spi = context_data;
+	u32 int_status, rx_data = 0;
+	irqreturn_t ret = IRQ_NONE;
+
+	int_status = ioread32(davinci_spi->base + SPIFLG);
+
+	while ((int_status & SPIFLG_RX_INTR_MASK)) {
+		if (likely(int_status & SPIFLG_RX_INTR_MASK)) {
+			ret = IRQ_HANDLED;
+
+			rx_data = ioread32(davinci_spi->base + SPIBUF);
+			davinci_spi->get_rx(rx_data, davinci_spi);
+
+			/* Disable Receive Interrupt */
+			iowrite32(~(SPIINT_RX_INTR | SPIINT_TX_INTR),
+					davinci_spi->base + SPIINT);
+		} else
+			(void)davinci_spi_check_error(davinci_spi, int_status);
+
+		int_status = ioread32(davinci_spi->base + SPIFLG);
+	}
+
+	return ret;
+}
+
+/**
+ * davinci_spi_probe - probe function for SPI Master Controller
+ * @pdev: platform_device structure which contains plateform specific data
+ */
+static int davinci_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct davinci_spi *davinci_spi;
+	struct davinci_spi_platform_data *pdata;
+	struct resource *r, *mem;
+	resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
+	resource_size_t	dma_tx_chan = SPI_NO_RESOURCE;
+	resource_size_t	dma_eventq = SPI_NO_RESOURCE;
+	int i = 0, ret = 0;
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
+	if (master == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	dev_set_drvdata(&pdev->dev, master);
+
+	davinci_spi = spi_master_get_devdata(master);
+	if (davinci_spi == NULL) {
+		ret = -ENOENT;
+		goto free_master;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		ret = -ENOENT;
+		goto free_master;
+	}
+
+	davinci_spi->pbase = r->start;
+	davinci_spi->region_size = resource_size(r);
+	davinci_spi->pdata = pdata;
+
+	mem = request_mem_region(r->start, davinci_spi->region_size,
+					pdev->name);
+	if (mem == NULL) {
+		ret = -EBUSY;
+		goto free_master;
+	}
+
+	davinci_spi->base = (struct davinci_spi_reg __iomem *)
+			ioremap(r->start, davinci_spi->region_size);
+	if (davinci_spi->base == NULL) {
+		ret = -ENOMEM;
+		goto release_region;
+	}
+
+	davinci_spi->irq = platform_get_irq(pdev, 0);
+	if (davinci_spi->irq <= 0) {
+		ret = -EINVAL;
+		goto unmap_io;
+	}
+
+	ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED,
+			  dev_name(&pdev->dev), davinci_spi);
+	if (ret)
+		goto unmap_io;
+
+	/* Allocate tmp_buf for tx_buf */
+	davinci_spi->tmp_buf = kzalloc(SPI_BUFSIZ, GFP_KERNEL);
+	if (davinci_spi->tmp_buf == NULL) {
+		ret = -ENOMEM;
+		goto irq_free;
+	}
+
+	davinci_spi->bitbang.master = spi_master_get(master);
+	if (davinci_spi->bitbang.master == NULL) {
+		ret = -ENODEV;
+		goto free_tmp_buf;
+	}
+
+	davinci_spi->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(davinci_spi->clk)) {
+		ret = -ENODEV;
+		goto put_master;
+	}
+	clk_enable(davinci_spi->clk);
+
+
+	master->bus_num = pdev->id;
+	master->num_chipselect = pdata->num_chipselect;
+	master->setup = davinci_spi_setup;
+	master->cleanup = davinci_spi_cleanup;
+
+	davinci_spi->bitbang.chipselect = davinci_spi_chipselect;
+	davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer;
+
+	davinci_spi->version = pdata->version;
+	use_dma = pdata->use_dma;
+
+	davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
+	if (davinci_spi->version == SPI_VERSION_2)
+		davinci_spi->bitbang.flags |= SPI_READY;
+
+	if (use_dma) {
+			r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+			if (r)
+				dma_rx_chan = r->start;
+			r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+			if (r)
+				dma_tx_chan = r->start;
+			r = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+			if (r)
+				dma_eventq = r->start;
+	}
+
+	if (!use_dma ||
+	    dma_rx_chan == SPI_NO_RESOURCE ||
+	    dma_tx_chan == SPI_NO_RESOURCE ||
+	    dma_eventq	== SPI_NO_RESOURCE) {
+		davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio;
+		use_dma = 0;
+	} else {
+		davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma;
+		davinci_spi->dma_channels = kzalloc(master->num_chipselect
+				* sizeof(struct davinci_spi_dma), GFP_KERNEL);
+		if (davinci_spi->dma_channels == NULL) {
+			ret = -ENOMEM;
+			goto free_clk;
+		}
+
+		for (i = 0; i < master->num_chipselect; i++) {
+			davinci_spi->dma_channels[i].dma_rx_channel = -1;
+			davinci_spi->dma_channels[i].dma_rx_sync_dev =
+				dma_rx_chan;
+			davinci_spi->dma_channels[i].dma_tx_channel = -1;
+			davinci_spi->dma_channels[i].dma_tx_sync_dev =
+				dma_tx_chan;
+			davinci_spi->dma_channels[i].eventq = dma_eventq;
+		}
+		dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n"
+				"Using RX channel = %d , TX channel = %d and "
+				"event queue = %d", dma_rx_chan, dma_tx_chan,
+				dma_eventq);
+	}
+
+	davinci_spi->get_rx = davinci_spi_rx_buf_u8;
+	davinci_spi->get_tx = davinci_spi_tx_buf_u8;
+
+	init_completion(&davinci_spi->done);
+
+	/* Reset In/OUT SPI module */
+	iowrite32(0, davinci_spi->base + SPIGCR0);
+	udelay(100);
+	iowrite32(1, davinci_spi->base + SPIGCR0);
+
+	/* Clock internal */
+	if (davinci_spi->pdata->clk_internal)
+		set_io_bits(davinci_spi->base + SPIGCR1,
+				SPIGCR1_CLKMOD_MASK);
+	else
+		clear_io_bits(davinci_spi->base + SPIGCR1,
+				SPIGCR1_CLKMOD_MASK);
+
+	/* master mode default */
+	set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
+
+	if (davinci_spi->pdata->intr_level)
+		iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL);
+	else
+		iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL);
+
+	ret = spi_bitbang_start(&davinci_spi->bitbang);
+	if (ret)
+		goto free_clk;
+
+	dev_info(&pdev->dev, "Controller at 0x%p \n", davinci_spi->base);
+
+	if (!pdata->poll_mode)
+		dev_info(&pdev->dev, "Operating in interrupt mode"
+			" using IRQ %d\n", davinci_spi->irq);
+
+	return ret;
+
+free_clk:
+	clk_disable(davinci_spi->clk);
+	clk_put(davinci_spi->clk);
+put_master:
+	spi_master_put(master);
+free_tmp_buf:
+	kfree(davinci_spi->tmp_buf);
+irq_free:
+	free_irq(davinci_spi->irq, davinci_spi);
+unmap_io:
+	iounmap(davinci_spi->base);
+release_region:
+	release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+free_master:
+	kfree(master);
+err:
+	return ret;
+}
+
+/**
+ * davinci_spi_remove - remove function for SPI Master Controller
+ * @pdev: platform_device structure which contains plateform specific data
+ *
+ * This function will do the reverse action of davinci_spi_probe function
+ * It will free the IRQ and SPI controller's memory region.
+ * It will also call spi_bitbang_stop to destroy the work queue which was
+ * created by spi_bitbang_start.
+ */
+static int __exit davinci_spi_remove(struct platform_device *pdev)
+{
+	struct davinci_spi *davinci_spi;
+	struct spi_master *master;
+
+	master = dev_get_drvdata(&pdev->dev);
+	davinci_spi = spi_master_get_devdata(master);
+
+	spi_bitbang_stop(&davinci_spi->bitbang);
+
+	clk_disable(davinci_spi->clk);
+	clk_put(davinci_spi->clk);
+	spi_master_put(master);
+	kfree(davinci_spi->tmp_buf);
+	free_irq(davinci_spi->irq, davinci_spi);
+	iounmap(davinci_spi->base);
+	release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+
+	return 0;
+}
+
+static struct platform_driver davinci_spi_driver = {
+	.driver.name = "spi_davinci",
+	.remove = __exit_p(davinci_spi_remove),
+};
+
+static int __init davinci_spi_init(void)
+{
+	return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe);
+}
+module_init(davinci_spi_init);
+
+static void __exit davinci_spi_exit(void)
+{
+	platform_driver_unregister(&davinci_spi_driver);
+}
+module_exit(davinci_spi_exit);
+
+MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 31620fa..8ed38f1 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -152,6 +152,7 @@
 #else
 static inline int mrst_spi_debugfs_init(struct dw_spi *dws)
 {
+	return 0;
 }
 
 static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
@@ -161,14 +162,14 @@
 
 static void wait_till_not_busy(struct dw_spi *dws)
 {
-	unsigned long end = jiffies + usecs_to_jiffies(1000);
+	unsigned long end = jiffies + 1 + usecs_to_jiffies(1000);
 
 	while (time_before(jiffies, end)) {
 		if (!(dw_readw(dws, sr) & SR_BUSY))
 			return;
 	}
 	dev_err(&dws->master->dev,
-		"DW SPI: Stutus keeps busy for 1000us after a read/write!\n");
+		"DW SPI: Status keeps busy for 1000us after a read/write!\n");
 }
 
 static void flush(struct dw_spi *dws)
@@ -358,6 +359,8 @@
 static irqreturn_t interrupt_transfer(struct dw_spi *dws)
 {
 	u16 irq_status, irq_mask = 0x3f;
+	u32 int_level = dws->fifo_len / 2;
+	u32 left;
 
 	irq_status = dw_readw(dws, isr) & irq_mask;
 	/* Error handling */
@@ -369,22 +372,23 @@
 		return IRQ_HANDLED;
 	}
 
-	/* INT comes from tx */
-	if (dws->tx && (irq_status & SPI_INT_TXEI)) {
-		while (dws->tx < dws->tx_end)
+	if (irq_status & SPI_INT_TXEI) {
+		spi_mask_intr(dws, SPI_INT_TXEI);
+
+		left = (dws->tx_end - dws->tx) / dws->n_bytes;
+		left = (left > int_level) ? int_level : left;
+
+		while (left--)
 			dws->write(dws);
+		dws->read(dws);
 
-		if (dws->tx == dws->tx_end) {
-			spi_mask_intr(dws, SPI_INT_TXEI);
-			transfer_complete(dws);
-		}
-	}
-
-	/* INT comes from rx */
-	if (dws->rx && (irq_status & SPI_INT_RXFI)) {
-		if (dws->read(dws))
+		/* Re-enable the IRQ if there is still data left to tx */
+		if (dws->tx_end > dws->tx)
+			spi_umask_intr(dws, SPI_INT_TXEI);
+		else
 			transfer_complete(dws);
 	}
+
 	return IRQ_HANDLED;
 }
 
@@ -404,12 +408,9 @@
 /* Must be called inside pump_transfers() */
 static void poll_transfer(struct dw_spi *dws)
 {
-	if (dws->tx) {
-		while (dws->write(dws))
-			dws->read(dws);
-	}
+	while (dws->write(dws))
+		dws->read(dws);
 
-	dws->read(dws);
 	transfer_complete(dws);
 }
 
@@ -428,6 +429,7 @@
 	u8 bits = 0;
 	u8 imask = 0;
 	u8 cs_change = 0;
+	u16 txint_level = 0;
 	u16 clk_div = 0;
 	u32 speed = 0;
 	u32 cr0 = 0;
@@ -438,6 +440,9 @@
 	chip = dws->cur_chip;
 	spi = message->spi;
 
+	if (unlikely(!chip->clk_div))
+		chip->clk_div = dws->max_freq / chip->speed_hz;
+
 	if (message->state == ERROR_STATE) {
 		message->status = -EIO;
 		goto early_exit;
@@ -492,7 +497,7 @@
 
 			/* clk_div doesn't support odd number */
 			clk_div = dws->max_freq / speed;
-			clk_div = (clk_div >> 1) << 1;
+			clk_div = (clk_div + 1) & 0xfffe;
 
 			chip->speed_hz = speed;
 			chip->clk_div = clk_div;
@@ -532,14 +537,35 @@
 	}
 	message->state = RUNNING_STATE;
 
+	/*
+	 * Adjust transfer mode if necessary. Requires platform dependent
+	 * chipselect mechanism.
+	 */
+	if (dws->cs_control) {
+		if (dws->rx && dws->tx)
+			chip->tmode = 0x00;
+		else if (dws->rx)
+			chip->tmode = 0x02;
+		else
+			chip->tmode = 0x01;
+
+		cr0 &= ~(0x3 << SPI_MODE_OFFSET);
+		cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
+	}
+
 	/* Check if current transfer is a DMA transaction */
 	dws->dma_mapped = map_dma_buffers(dws);
 
+	/*
+	 * Interrupt mode
+	 * we only need set the TXEI IRQ, as TX/RX always happen syncronizely
+	 */
 	if (!dws->dma_mapped && !chip->poll_mode) {
-		if (dws->rx)
-			imask |= SPI_INT_RXFI;
-		if (dws->tx)
-			imask |= SPI_INT_TXEI;
+		int templen = dws->len / dws->n_bytes;
+		txint_level = dws->fifo_len / 2;
+		txint_level = (templen > txint_level) ? txint_level : templen;
+
+		imask |= SPI_INT_TXEI;
 		dws->transfer_handler = interrupt_transfer;
 	}
 
@@ -549,21 +575,23 @@
 	 *	2. clk_div is changed
 	 *	3. control value changes
 	 */
-	if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) {
+	if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div || imask) {
 		spi_enable_chip(dws, 0);
 
 		if (dw_readw(dws, ctrl0) != cr0)
 			dw_writew(dws, ctrl0, cr0);
 
-		/* Set the interrupt mask, for poll mode just diable all int */
-		spi_mask_intr(dws, 0xff);
-		if (!chip->poll_mode)
-			spi_umask_intr(dws, imask);
-
 		spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
 		spi_chip_sel(dws, spi->chip_select);
-		spi_enable_chip(dws, 1);
 
+		/* Set the interrupt mask, for poll mode just diable all int */
+		spi_mask_intr(dws, 0xff);
+		if (imask)
+			spi_umask_intr(dws, imask);
+		if (txint_level)
+			dw_writew(dws, txfltr, txint_level);
+
+		spi_enable_chip(dws, 1);
 		if (cs_change)
 			dws->prev_chip = chip;
 	}
@@ -712,11 +740,11 @@
 	}
 	chip->bits_per_word = spi->bits_per_word;
 
+	if (!spi->max_speed_hz) {
+		dev_err(&spi->dev, "No max speed HZ parameter\n");
+		return -EINVAL;
+	}
 	chip->speed_hz = spi->max_speed_hz;
-	if (chip->speed_hz)
-		chip->clk_div = 25000000 / chip->speed_hz;
-	else
-		chip->clk_div = 8;	/* default value */
 
 	chip->tmode = 0; /* Tx & Rx */
 	/* Default SPI mode is SCPOL = 0, SCPH = 0 */
@@ -735,7 +763,7 @@
 	kfree(chip);
 }
 
-static int __init init_queue(struct dw_spi *dws)
+static int __devinit init_queue(struct dw_spi *dws)
 {
 	INIT_LIST_HEAD(&dws->queue);
 	spin_lock_init(&dws->lock);
@@ -817,6 +845,22 @@
 	spi_mask_intr(dws, 0xff);
 	spi_enable_chip(dws, 1);
 	flush(dws);
+
+	/*
+	 * Try to detect the FIFO depth if not set by interface driver,
+	 * the depth could be from 2 to 256 from HW spec
+	 */
+	if (!dws->fifo_len) {
+		u32 fifo;
+		for (fifo = 2; fifo <= 257; fifo++) {
+			dw_writew(dws, txfltr, fifo);
+			if (fifo != dw_readw(dws, txfltr))
+				break;
+		}
+
+		dws->fifo_len = (fifo == 257) ? 0 : fifo;
+		dw_writew(dws, txfltr, 0);
+	}
 }
 
 int __devinit dw_spi_add_host(struct dw_spi *dws)
@@ -913,6 +957,7 @@
 	/* Disconnect from the SPI framework */
 	spi_unregister_master(dws->master);
 }
+EXPORT_SYMBOL(dw_spi_remove_host);
 
 int dw_spi_suspend_host(struct dw_spi *dws)
 {
diff --git a/drivers/spi/dw_spi_mmio.c b/drivers/spi/dw_spi_mmio.c
new file mode 100644
index 0000000..e35b45a
--- /dev/null
+++ b/drivers/spi/dw_spi_mmio.c
@@ -0,0 +1,147 @@
+/*
+ * dw_spi_mmio.c - Memory-mapped interface driver for DW SPI Core
+ *
+ * Copyright (c) 2010, Octasic semiconductor.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spi/dw_spi.h>
+#include <linux/spi/spi.h>
+
+#define DRIVER_NAME "dw_spi_mmio"
+
+struct dw_spi_mmio {
+	struct dw_spi  dws;
+	struct clk     *clk;
+};
+
+static int __devinit dw_spi_mmio_probe(struct platform_device *pdev)
+{
+	struct dw_spi_mmio *dwsmmio;
+	struct dw_spi *dws;
+	struct resource *mem, *ioarea;
+	int ret;
+
+	dwsmmio = kzalloc(sizeof(struct dw_spi_mmio), GFP_KERNEL);
+	if (!dwsmmio) {
+		ret = -ENOMEM;
+		goto err_end;
+	}
+
+	dws = &dwsmmio->dws;
+
+	/* Get basic io resource and map it */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "no mem resource?\n");
+		ret = -EINVAL;
+		goto err_kfree;
+	}
+
+	ioarea = request_mem_region(mem->start, resource_size(mem),
+			pdev->name);
+	if (!ioarea) {
+		dev_err(&pdev->dev, "SPI region already claimed\n");
+		ret = -EBUSY;
+		goto err_kfree;
+	}
+
+	dws->regs = ioremap_nocache(mem->start, resource_size(mem));
+	if (!dws->regs) {
+		dev_err(&pdev->dev, "SPI region already mapped\n");
+		ret = -ENOMEM;
+		goto err_release_reg;
+	}
+
+	dws->irq = platform_get_irq(pdev, 0);
+	if (dws->irq < 0) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		ret = dws->irq; /* -ENXIO */
+		goto err_unmap;
+	}
+
+	dwsmmio->clk = clk_get(&pdev->dev, NULL);
+	if (!dwsmmio->clk) {
+		ret = -ENODEV;
+		goto err_irq;
+	}
+	clk_enable(dwsmmio->clk);
+
+	dws->parent_dev = &pdev->dev;
+	dws->bus_num = 0;
+	dws->num_cs = 4;
+	dws->max_freq = clk_get_rate(dwsmmio->clk);
+
+	ret = dw_spi_add_host(dws);
+	if (ret)
+		goto err_clk;
+
+	platform_set_drvdata(pdev, dwsmmio);
+	return 0;
+
+err_clk:
+	clk_disable(dwsmmio->clk);
+	clk_put(dwsmmio->clk);
+	dwsmmio->clk = NULL;
+err_irq:
+	free_irq(dws->irq, dws);
+err_unmap:
+	iounmap(dws->regs);
+err_release_reg:
+	release_mem_region(mem->start, resource_size(mem));
+err_kfree:
+	kfree(dwsmmio);
+err_end:
+	return ret;
+}
+
+static int __devexit dw_spi_mmio_remove(struct platform_device *pdev)
+{
+	struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
+	struct resource *mem;
+
+	platform_set_drvdata(pdev, NULL);
+
+	clk_disable(dwsmmio->clk);
+	clk_put(dwsmmio->clk);
+	dwsmmio->clk = NULL;
+
+	free_irq(dwsmmio->dws.irq, &dwsmmio->dws);
+	dw_spi_remove_host(&dwsmmio->dws);
+	iounmap(dwsmmio->dws.regs);
+	kfree(dwsmmio);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem->start, resource_size(mem));
+	return 0;
+}
+
+static struct platform_driver dw_spi_mmio_driver = {
+	.remove		= __devexit_p(dw_spi_mmio_remove),
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init dw_spi_mmio_init(void)
+{
+	return platform_driver_probe(&dw_spi_mmio_driver, dw_spi_mmio_probe);
+}
+module_init(dw_spi_mmio_init);
+
+static void __exit dw_spi_mmio_exit(void)
+{
+	platform_driver_unregister(&dw_spi_mmio_driver);
+}
+module_exit(dw_spi_mmio_exit);
+
+MODULE_AUTHOR("Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>");
+MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c
index 34ba691..1f0735f 100644
--- a/drivers/spi/dw_spi_pci.c
+++ b/drivers/spi/dw_spi_pci.c
@@ -73,6 +73,7 @@
 	dws->num_cs = 4;
 	dws->max_freq = 25000000;	/* for Moorestwon */
 	dws->irq = pdev->irq;
+	dws->fifo_len = 40;		/* FIFO has 40 words buffer */
 
 	ret = dw_spi_add_host(dws);
 	if (ret)
@@ -98,6 +99,7 @@
 	struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
 
 	pci_set_drvdata(pdev, NULL);
+	dw_spi_remove_host(&dwpci->dws);
 	iounmap(dwpci->dws.regs);
 	pci_release_region(pdev, 0);
 	kfree(dwpci);
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index f50c81d..0474786 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -503,7 +503,7 @@
 	return mpc52xx_psc_spi_do_remove(&op->dev);
 }
 
-static struct of_device_id mpc52xx_psc_spi_of_match[] = {
+static const struct of_device_id mpc52xx_psc_spi_of_match[] = {
 	{ .compatible = "fsl,mpc5200-psc-spi", },
 	{ .compatible = "mpc5200-psc-spi", }, /* old */
 	{}
diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c
index 45bfe64..6eab465 100644
--- a/drivers/spi/mpc52xx_spi.c
+++ b/drivers/spi/mpc52xx_spi.c
@@ -550,7 +550,7 @@
 	return 0;
 }
 
-static struct of_device_id mpc52xx_spi_match[] __devinitdata = {
+static const struct of_device_id mpc52xx_spi_match[] __devinitconst = {
 	{ .compatible = "fsl,mpc5200-spi", },
 	{}
 };
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 1893f1e..0ddbbe4 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -469,7 +469,7 @@
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
 	int gpio = spi_imx->chipselect[spi->chip_select];
 
-	pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
+	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
 		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
 
 	if (gpio >= 0)
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index 1fb2a6e..4f0cc9d 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -365,7 +365,7 @@
 
 	if ((mpc8xxx_spi->spibrg / hz) > 64) {
 		cs->hw_mode |= SPMODE_DIV16;
-		pm = mpc8xxx_spi->spibrg / (hz * 64);
+		pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1;
 
 		WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. "
 			  "Will use %d Hz instead.\n", dev_name(&spi->dev),
@@ -373,7 +373,7 @@
 		if (pm > 16)
 			pm = 16;
 	} else
-		pm = mpc8xxx_spi->spibrg / (hz * 4);
+		pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1;
 	if (pm)
 		pm--;
 
@@ -1328,7 +1328,7 @@
 static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
-	unsigned int irq;
+	int irq;
 	struct spi_master *master;
 
 	if (!pdev->dev.platform_data)
@@ -1339,7 +1339,7 @@
 		return -EINVAL;
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq)
+	if (irq <= 0)
 		return -EINVAL;
 
 	master = mpc8xxx_spi_probe(&pdev->dev, mem, irq);
diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c
index 140a18d..6d8d402 100644
--- a/drivers/spi/spi_ppc4xx.c
+++ b/drivers/spi/spi_ppc4xx.c
@@ -578,7 +578,7 @@
 	return 0;
 }
 
-static struct of_device_id spi_ppc4xx_of_match[] = {
+static const struct of_device_id spi_ppc4xx_of_match[] = {
 	{ .compatible = "ibm,ppc4xx-spi", },
 	{},
 };
diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 88a456d..9736581 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -28,7 +28,7 @@
 #include <linux/spi/spi.h>
 
 #include <mach/dma.h>
-#include <plat/spi.h>
+#include <plat/s3c64xx-spi.h>
 
 /* Registers and bit-fields */
 
@@ -137,6 +137,7 @@
 /**
  * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
  * @clk: Pointer to the spi clock.
+ * @src_clk: Pointer to the clock used to generate SPI signals.
  * @master: Pointer to the SPI Protocol master.
  * @workqueue: Work queue for the SPI xfer requests.
  * @cntrlr_info: Platform specific data for the controller this driver manages.
@@ -157,10 +158,11 @@
 struct s3c64xx_spi_driver_data {
 	void __iomem                    *regs;
 	struct clk                      *clk;
+	struct clk                      *src_clk;
 	struct platform_device          *pdev;
 	struct spi_master               *master;
 	struct workqueue_struct	        *workqueue;
-	struct s3c64xx_spi_cntrlr_info  *cntrlr_info;
+	struct s3c64xx_spi_info  *cntrlr_info;
 	struct spi_device               *tgl_spi;
 	struct work_struct              work;
 	struct list_head                queue;
@@ -180,7 +182,7 @@
 
 static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 {
-	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	unsigned long loops;
 	u32 val;
@@ -225,7 +227,7 @@
 				struct spi_device *spi,
 				struct spi_transfer *xfer, int dma_mode)
 {
-	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	u32 modecfg, chcfg;
 
@@ -298,19 +300,20 @@
 		if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
 			/* Deselect the last toggled device */
 			cs = sdd->tgl_spi->controller_data;
-			cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1);
+			cs->set_level(cs->line,
+					spi->mode & SPI_CS_HIGH ? 0 : 1);
 		}
 		sdd->tgl_spi = NULL;
 	}
 
 	cs = spi->controller_data;
-	cs->set_level(spi->mode & SPI_CS_HIGH ? 1 : 0);
+	cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
 }
 
 static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
 				struct spi_transfer *xfer, int dma_mode)
 {
-	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	unsigned long val;
 	int ms;
@@ -384,12 +387,11 @@
 	if (sdd->tgl_spi == spi)
 		sdd->tgl_spi = NULL;
 
-	cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1);
+	cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
 }
 
 static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 {
-	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	u32 val;
 
@@ -435,7 +437,7 @@
 	/* Configure Clock */
 	val = readl(regs + S3C64XX_SPI_CLK_CFG);
 	val &= ~S3C64XX_SPI_PSR_MASK;
-	val |= ((clk_get_rate(sci->src_clk) / sdd->cur_speed / 2 - 1)
+	val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1)
 			& S3C64XX_SPI_PSR_MASK);
 	writel(val, regs + S3C64XX_SPI_CLK_CFG);
 
@@ -558,7 +560,7 @@
 static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
 					struct spi_message *msg)
 {
-	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	struct spi_device *spi = msg->spi;
 	struct s3c64xx_spi_csinfo *cs = spi->controller_data;
 	struct spi_transfer *xfer;
@@ -632,8 +634,8 @@
 		S3C64XX_SPI_DEACT(sdd);
 
 		if (status) {
-			dev_err(&spi->dev, "I/O Error: \
-				rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
+			dev_err(&spi->dev, "I/O Error: "
+				"rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
 				xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
 				(sdd->state & RXBUSY) ? 'f' : 'p',
 				(sdd->state & TXBUSY) ? 'f' : 'p',
@@ -786,7 +788,7 @@
 {
 	struct s3c64xx_spi_csinfo *cs = spi->controller_data;
 	struct s3c64xx_spi_driver_data *sdd;
-	struct s3c64xx_spi_cntrlr_info *sci;
+	struct s3c64xx_spi_info *sci;
 	struct spi_message *msg;
 	u32 psr, speed;
 	unsigned long flags;
@@ -831,17 +833,17 @@
 	}
 
 	/* Check if we can provide the requested rate */
-	speed = clk_get_rate(sci->src_clk) / 2 / (0 + 1); /* Max possible */
+	speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); /* Max possible */
 
 	if (spi->max_speed_hz > speed)
 		spi->max_speed_hz = speed;
 
-	psr = clk_get_rate(sci->src_clk) / 2 / spi->max_speed_hz - 1;
+	psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1;
 	psr &= S3C64XX_SPI_PSR_MASK;
 	if (psr == S3C64XX_SPI_PSR_MASK)
 		psr--;
 
-	speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1);
+	speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
 	if (spi->max_speed_hz < speed) {
 		if (psr+1 < S3C64XX_SPI_PSR_MASK) {
 			psr++;
@@ -851,7 +853,7 @@
 		}
 	}
 
-	speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1);
+	speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
 	if (spi->max_speed_hz >= speed)
 		spi->max_speed_hz = speed;
 	else
@@ -867,7 +869,7 @@
 
 static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
 {
-	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	void __iomem *regs = sdd->regs;
 	unsigned int val;
 
@@ -902,7 +904,7 @@
 {
 	struct resource	*mem_res, *dmatx_res, *dmarx_res;
 	struct s3c64xx_spi_driver_data *sdd;
-	struct s3c64xx_spi_cntrlr_info *sci;
+	struct s3c64xx_spi_info *sci;
 	struct spi_master *master;
 	int ret;
 
@@ -1000,18 +1002,15 @@
 		goto err4;
 	}
 
-	if (sci->src_clk_nr == S3C64XX_SPI_SRCCLK_PCLK)
-		sci->src_clk = sdd->clk;
-	else
-		sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name);
-	if (IS_ERR(sci->src_clk)) {
+	sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name);
+	if (IS_ERR(sdd->src_clk)) {
 		dev_err(&pdev->dev,
 			"Unable to acquire clock '%s'\n", sci->src_clk_name);
-		ret = PTR_ERR(sci->src_clk);
+		ret = PTR_ERR(sdd->src_clk);
 		goto err5;
 	}
 
-	if (sci->src_clk != sdd->clk && clk_enable(sci->src_clk)) {
+	if (clk_enable(sdd->src_clk)) {
 		dev_err(&pdev->dev, "Couldn't enable clock '%s'\n",
 							sci->src_clk_name);
 		ret = -EBUSY;
@@ -1040,11 +1039,10 @@
 		goto err8;
 	}
 
-	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d \
-					with %d Slaves attached\n",
+	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d "
+					"with %d Slaves attached\n",
 					pdev->id, master->num_chipselect);
-	dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\
-					\tDMA=[Rx-%d, Tx-%d]\n",
+	dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
 					mem_res->end, mem_res->start,
 					sdd->rx_dmach, sdd->tx_dmach);
 
@@ -1053,11 +1051,9 @@
 err8:
 	destroy_workqueue(sdd->workqueue);
 err7:
-	if (sci->src_clk != sdd->clk)
-		clk_disable(sci->src_clk);
+	clk_disable(sdd->src_clk);
 err6:
-	if (sci->src_clk != sdd->clk)
-		clk_put(sci->src_clk);
+	clk_put(sdd->src_clk);
 err5:
 	clk_disable(sdd->clk);
 err4:
@@ -1078,7 +1074,6 @@
 {
 	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
-	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
 	struct resource	*mem_res;
 	unsigned long flags;
 
@@ -1093,11 +1088,8 @@
 
 	destroy_workqueue(sdd->workqueue);
 
-	if (sci->src_clk != sdd->clk)
-		clk_disable(sci->src_clk);
-
-	if (sci->src_clk != sdd->clk)
-		clk_put(sci->src_clk);
+	clk_disable(sdd->src_clk);
+	clk_put(sdd->src_clk);
 
 	clk_disable(sdd->clk);
 	clk_put(sdd->clk);
@@ -1105,7 +1097,8 @@
 	iounmap((void *) sdd->regs);
 
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem_res->start, resource_size(mem_res));
+	if (mem_res != NULL)
+		release_mem_region(mem_res->start, resource_size(mem_res));
 
 	platform_set_drvdata(pdev, NULL);
 	spi_master_put(master);
@@ -1118,8 +1111,6 @@
 {
 	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
-	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
-	struct s3c64xx_spi_csinfo *cs;
 	unsigned long flags;
 
 	spin_lock_irqsave(&sdd->lock, flags);
@@ -1130,9 +1121,7 @@
 		msleep(10);
 
 	/* Disable the clock */
-	if (sci->src_clk != sdd->clk)
-		clk_disable(sci->src_clk);
-
+	clk_disable(sdd->src_clk);
 	clk_disable(sdd->clk);
 
 	sdd->cur_speed = 0; /* Output Clock is stopped */
@@ -1144,15 +1133,13 @@
 {
 	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
-	struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info;
+	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
 	unsigned long flags;
 
 	sci->cfg_gpio(pdev);
 
 	/* Enable the clock */
-	if (sci->src_clk != sdd->clk)
-		clk_enable(sci->src_clk);
-
+	clk_enable(sdd->src_clk);
 	clk_enable(sdd->clk);
 
 	s3c64xx_spi_hwinit(sdd, pdev->id);
diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c
index 30973ec..d93b667 100644
--- a/drivers/spi/spi_sh_msiof.c
+++ b/drivers/spi/spi_sh_msiof.c
@@ -20,12 +20,12 @@
 #include <linux/bitmap.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/err.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/spi/sh_msiof.h>
 
-#include <asm/spi.h>
 #include <asm/unaligned.h>
 
 struct sh_msiof_spi_priv {
diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi_stmp.c
index 2552bb3..fadff76 100644
--- a/drivers/spi/spi_stmp.c
+++ b/drivers/spi/spi_stmp.c
@@ -76,7 +76,7 @@
 			break;						\
 		}							\
 		cpu_relax();						\
-	} while (time_before(end_jiffies, jiffies));			\
+	} while (time_before(jiffies, end_jiffies));			\
 	succeeded;							\
 	})
 
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 9f38637..1b47363 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -93,6 +93,26 @@
 	void (*rx_fn) (struct xilinx_spi *);
 };
 
+static void xspi_write32(u32 val, void __iomem *addr)
+{
+	iowrite32(val, addr);
+}
+
+static unsigned int xspi_read32(void __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+static void xspi_write32_be(u32 val, void __iomem *addr)
+{
+	iowrite32be(val, addr);
+}
+
+static unsigned int xspi_read32_be(void __iomem *addr)
+{
+	return ioread32be(addr);
+}
+
 static void xspi_tx8(struct xilinx_spi *xspi)
 {
 	xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET);
@@ -374,11 +394,11 @@
 	xspi->mem = *mem;
 	xspi->irq = irq;
 	if (pdata->little_endian) {
-		xspi->read_fn = ioread32;
-		xspi->write_fn = iowrite32;
+		xspi->read_fn = xspi_read32;
+		xspi->write_fn = xspi_write32;
 	} else {
-		xspi->read_fn = ioread32be;
-		xspi->write_fn = iowrite32be;
+		xspi->read_fn = xspi_read32_be;
+		xspi->write_fn = xspi_write32_be;
 	}
 	xspi->bits_per_word = pdata->bits_per_word;
 	if (xspi->bits_per_word == 8) {
diff --git a/drivers/spi/xilinx_spi_of.c b/drivers/spi/xilinx_spi_of.c
index 71dc3ad..ed34a8d 100644
--- a/drivers/spi/xilinx_spi_of.c
+++ b/drivers/spi/xilinx_spi_of.c
@@ -99,7 +99,7 @@
 	return xilinx_spi_remove(op);
 }
 
-static struct of_device_id xilinx_spi_of_match[] = {
+static const struct of_device_id xilinx_spi_of_match[] = {
 	{ .compatible = "xlnx,xps-spi-2.00.a", },
 	{ .compatible = "xlnx,xps-spi-2.00.b", },
 	{}
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 5681ebe..03dfd27 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -494,8 +494,7 @@
 #endif
 			break;
 		case SSB_BUSTYPE_SDIO:
-#ifdef CONFIG_SSB_SDIO
-			sdev->irq = bus->host_sdio->dev.irq;
+#ifdef CONFIG_SSB_SDIOHOST
 			dev->parent = &bus->host_sdio->dev;
 #endif
 			break;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 6e8bcdf..a678186 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1312,9 +1312,9 @@
 	void __user *addr = as->userurb;
 	unsigned int i;
 
-	if (as->userbuffer)
+	if (as->userbuffer && urb->actual_length)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
-				 urb->transfer_buffer_length))
+				 urb->actual_length))
 			goto err_out;
 	if (put_user(as->status, &userurb->status))
 		goto err_out;
@@ -1334,14 +1334,11 @@
 		}
 	}
 
-	free_async(as);
-
 	if (put_user(addr, (void __user * __user *)arg))
 		return -EFAULT;
 	return 0;
 
 err_out:
-	free_async(as);
 	return -EFAULT;
 }
 
@@ -1371,8 +1368,11 @@
 static int proc_reapurb(struct dev_state *ps, void __user *arg)
 {
 	struct async *as = reap_as(ps);
-	if (as)
-		return processcompl(as, (void __user * __user *)arg);
+	if (as) {
+		int retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
 	if (signal_pending(current))
 		return -EINTR;
 	return -EIO;
@@ -1380,11 +1380,16 @@
 
 static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg)
 {
+	int retval;
 	struct async *as;
 
-	if (!(as = async_getcompleted(ps)))
-		return -EAGAIN;
-	return processcompl(as, (void __user * __user *)arg);
+	as = async_getcompleted(ps);
+	retval = -EAGAIN;
+	if (as) {
+		retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+	}
+	return retval;
 }
 
 #ifdef CONFIG_COMPAT
@@ -1475,9 +1480,9 @@
 	void __user *addr = as->userurb;
 	unsigned int i;
 
-	if (as->userbuffer)
+	if (as->userbuffer && urb->actual_length)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
-				 urb->transfer_buffer_length))
+				 urb->actual_length))
 			return -EFAULT;
 	if (put_user(as->status, &userurb->status))
 		return -EFAULT;
@@ -1497,7 +1502,6 @@
 		}
 	}
 
-	free_async(as);
 	if (put_user(ptr_to_compat(addr), (u32 __user *)arg))
 		return -EFAULT;
 	return 0;
@@ -1506,8 +1510,11 @@
 static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
 {
 	struct async *as = reap_as(ps);
-	if (as)
-		return processcompl_compat(as, (void __user * __user *)arg);
+	if (as) {
+		int retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
 	if (signal_pending(current))
 		return -EINTR;
 	return -EIO;
@@ -1515,11 +1522,16 @@
 
 static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg)
 {
+	int retval;
 	struct async *as;
 
-	if (!(as = async_getcompleted(ps)))
-		return -EAGAIN;
-	return processcompl_compat(as, (void __user * __user *)arg);
+	retval = -EAGAIN;
+	as = async_getcompleted(ps);
+	if (as) {
+		retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+	}
+	return retval;
 }
 
 
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 0a577d5..d4f0db5 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -358,7 +358,7 @@
 	 * b15:		bmType (0 == data)
 	 */
 	len = skb->len;
-	put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+	put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2));
 
 	/* add a zero-length EEM packet, if needed */
 	if (padlen)
@@ -464,7 +464,6 @@
 			}
 
 			/* validate CRC */
-			crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
 			if (header & BIT(14)) {
 				crc = get_unaligned_le32(skb->data + len
 							- ETH_FCS_LEN);
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 4295601..76496f5 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -29,7 +29,7 @@
 #if defined USB_ETH_RNDIS
 #  undef USB_ETH_RNDIS
 #endif
-#ifdef CONFIG_USB_ETH_RNDIS
+#ifdef CONFIG_USB_G_MULTI_RNDIS
 #  define USB_ETH_RNDIS y
 #endif
 
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index e220fb8..8b45145 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -26,6 +26,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 4b5dbd0..5fc80a1 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2582,6 +2582,7 @@
 	hsotg->gadget.dev.driver = NULL;
 	return ret;
 }
+EXPORT_SYMBOL(usb_gadget_register_driver);
 
 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 {
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index c75d927..1937267 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -196,7 +196,9 @@
 			if (hostpc_reg) {
 				u32	t3;
 
+				spin_unlock_irq(&ehci->lock);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irq(&ehci->lock);
 				t3 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
 				t3 = ehci_readl(ehci, hostpc_reg);
@@ -904,17 +906,18 @@
 			if ((temp & PORT_PE) == 0
 					|| (temp & PORT_RESET) != 0)
 				goto error;
-			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
 			/* After above check the port must be connected.
 			 * Set appropriate bit thus could put phy into low power
 			 * mode if we have hostpc feature
 			 */
+			temp &= ~PORT_WKCONN_E;
+			temp |= PORT_WKDISC_E | PORT_WKOC_E;
+			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
 			if (hostpc_reg) {
-				temp &= ~PORT_WKCONN_E;
-				temp |= (PORT_WKDISC_E | PORT_WKOC_E);
-				ehci_writel(ehci, temp | PORT_SUSPEND,
-							status_reg);
+				spin_unlock_irqrestore(&ehci->lock, flags);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irqsave(&ehci->lock, flags);
 				temp1 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, temp1 | HOSTPC_PHCD,
 					hostpc_reg);
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index d224ab4..e123289 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -105,7 +105,7 @@
 		if (ep->td_base)
 			cpm_muram_free(cpm_muram_offset(ep->td_base));
 
-		if (ep->conf_frame_Q) {
+		if (kfifo_initialized(&ep->conf_frame_Q)) {
 			size = cq_howmany(&ep->conf_frame_Q);
 			for (; size; size--) {
 				struct packet *pkt = cq_get(&ep->conf_frame_Q);
@@ -115,7 +115,7 @@
 			cq_delete(&ep->conf_frame_Q);
 		}
 
-		if (ep->empty_frame_Q) {
+		if (kfifo_initialized(&ep->empty_frame_Q)) {
 			size = cq_howmany(&ep->empty_frame_Q);
 			for (; size; size--) {
 				struct packet *pkt = cq_get(&ep->empty_frame_Q);
@@ -125,7 +125,7 @@
 			cq_delete(&ep->empty_frame_Q);
 		}
 
-		if (ep->dummy_packets_Q) {
+		if (kfifo_initialized(&ep->dummy_packets_Q)) {
 			size = cq_howmany(&ep->dummy_packets_Q);
 			for (; size; size--) {
 				u8 *buff = cq_get(&ep->dummy_packets_Q);
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 0025847..8b37a4b 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3245,6 +3245,7 @@
 	{ USB_DEVICE(0x0711, 0x0902) },
 	{ USB_DEVICE(0x0711, 0x0903) },
 	{ USB_DEVICE(0x0711, 0x0918) },
+	{ USB_DEVICE(0x0711, 0x0920) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index de56b3d..3d2d3e5 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -44,6 +44,7 @@
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM
+	select USB_OTG_UTILS
 	help
 	  Enable this to support ULPI connected USB OTG transceivers which
 	  are likely found on embedded boards.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 216f187..7638828 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -50,7 +50,7 @@
  * Version Information
  */
 #define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
 
 static int debug;
@@ -145,10 +145,15 @@
 
 
 
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -552,9 +557,16 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
 	/*
-	 * Due to many user requests for multiple ELV devices we enable
-	 * them by default.
+	 * ELV devices:
 	 */
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
@@ -571,11 +583,17 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -697,6 +715,7 @@
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index da92b49..c8951ae 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,8 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+#define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
+
 /* OOCDlink by Joern Kaipf <joernk@web.de>
  * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
 #define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
@@ -161,22 +163,37 @@
 /*
  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
  * All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
  *
  * The previously included PID for the UO 100 module was incorrect.
  * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
  *
  * Armin Laeuger originally sent the PID for the UM 100 module.
  */
+#define FTDI_ELV_USR_PID	0xE000	/* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID	0xE001	/* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID	0xE002	/* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID	0xE004	/* WS 550 */
+#define FTDI_ELV_EC3000_PID	0xE006	/* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID	0xE008	/* WS 888 */
+#define FTDI_ELV_TWS550_PID	0xE009	/* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID	0xE00A	/* Funk Energie Monitor */
 #define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
 #define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID	0xE0EB	/* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
 #define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
 #define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
 #define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 #define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
 #define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
 #define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID	0xE0F5	/* ELV UTP 8 */
 #define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID	0xE0F7	/* Conrad WS 444 PC */
 #define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 #define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
 #define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
@@ -968,6 +985,7 @@
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
 #define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
+#define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
 
 /*
  * Marvell SheevaPlug
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ac1b644..3eb6143 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -298,6 +298,7 @@
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+       { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
 };
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c932f90..49575fba 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -941,7 +941,7 @@
 UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
 		"Microtech",
 		"USB-SCSI-DB25",
-		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ), 
 
 UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index e9f9954..bbeeb92 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -78,7 +78,7 @@
 MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
 MODULE_LICENSE("GPL");
 
-static unsigned int delay_use = 5;
+static unsigned int delay_use = 1;
 module_param(delay_use, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
 
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index e4e4d43..9ee67d6 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1931,22 +1931,22 @@
 			 * PowerMac2,2 summer 2000 iMacs
 			 * PowerMac4,1 january 2001 iMacs "flower power"
 			 */
-			if (machine_is_compatible("PowerMac2,1") ||
-			    machine_is_compatible("PowerMac2,2") ||
-			    machine_is_compatible("PowerMac4,1"))
+			if (of_machine_is_compatible("PowerMac2,1") ||
+			    of_machine_is_compatible("PowerMac2,2") ||
+			    of_machine_is_compatible("PowerMac4,1"))
 				default_vmode = VMODE_1024_768_75;
 
 			/* iBook SE */
-			if (machine_is_compatible("PowerBook2,2"))
+			if (of_machine_is_compatible("PowerBook2,2"))
 				default_vmode = VMODE_800_600_60;
 
 			/* PowerBook Firewire (Pismo), iBook Dual USB */
-			if (machine_is_compatible("PowerBook3,1") ||
-			    machine_is_compatible("PowerBook4,1"))
+			if (of_machine_is_compatible("PowerBook3,1") ||
+			    of_machine_is_compatible("PowerBook4,1"))
 				default_vmode = VMODE_1024_768_60;
 
 			/* PowerBook Titanium */
-			if (machine_is_compatible("PowerBook3,2"))
+			if (of_machine_is_compatible("PowerBook3,2"))
 				default_vmode = VMODE_1152_768_60;
 	
 			if (default_cmode > 16) 
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 1ddeb4c..e45ab8d 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2439,7 +2439,7 @@
 	 * The Apple iBook1 uses non-standard memory frequencies.
 	 * We detect it and set the frequency manually.
 	 */
-	if (machine_is_compatible("PowerBook2,1")) {
+	if (of_machine_is_compatible("PowerBook2,1")) {
 		par->pll_limits.mclk = 70;
 		par->pll_limits.xclk = 53;
 	}
@@ -2659,7 +2659,7 @@
 		      FBINFO_HWACCEL_YPAN;
 
 #ifdef CONFIG_PMAC_BACKLIGHT
-	if (M64_HAS(G3_PB_1_1) && machine_is_compatible("PowerBook1,1")) {
+	if (M64_HAS(G3_PB_1_1) && of_machine_is_compatible("PowerBook1,1")) {
 		/*
 		 * these bits let the 101 powerbook
 		 * wake up from sleep -- paulus
@@ -2690,9 +2690,9 @@
 				if (M64_HAS(G3_PB_1024x768))
 					/* G3 PowerBook with 1024x768 LCD */
 					default_vmode = VMODE_1024_768_60;
-				else if (machine_is_compatible("iMac"))
+				else if (of_machine_is_compatible("iMac"))
 					default_vmode = VMODE_1024_768_75;
-				else if (machine_is_compatible("PowerBook2,1"))
+				else if (of_machine_is_compatible("PowerBook2,1"))
 					/* iBook with 800x600 LCD */
 					default_vmode = VMODE_800_600_60;
 				else
@@ -3104,7 +3104,7 @@
 	}
 
 	dp = pci_device_to_OF_node(pdev);
-	if (node == dp->node) {
+	if (node == dp->phandle) {
 		struct fb_var_screeninfo *var = &default_var;
 		unsigned int N, P, Q, M, T, R;
 		u32 v_total, h_total;
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
index 1a056ad..fa1198c 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/aty/radeon_backlight.c
@@ -175,9 +175,9 @@
 
 #ifdef CONFIG_PMAC_BACKLIGHT
 	pdata->negative = pdata->negative ||
-		machine_is_compatible("PowerBook4,3") ||
-		machine_is_compatible("PowerBook6,3") ||
-		machine_is_compatible("PowerBook6,5");
+		of_machine_is_compatible("PowerBook4,3") ||
+		of_machine_is_compatible("PowerBook6,3") ||
+		of_machine_is_compatible("PowerBook6,5");
 #endif
 
 	rinfo->info->bl_dev = bd;
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index eb12182..d25df51 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -161,8 +161,17 @@
 	return 0;
 }
 
+static void efifb_destroy(struct fb_info *info)
+{
+	if (info->screen_base)
+		iounmap(info->screen_base);
+	release_mem_region(info->aperture_base, info->aperture_size);
+	framebuffer_release(info);
+}
+
 static struct fb_ops efifb_ops = {
 	.owner		= THIS_MODULE,
+	.fb_destroy	= efifb_destroy,
 	.fb_setcolreg	= efifb_setcolreg,
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
@@ -281,7 +290,7 @@
 	info->par = NULL;
 
 	info->aperture_base = efifb_fix.smem_start;
-	info->aperture_size = size_total;
+	info->aperture_size = size_remap;
 
 	info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len);
 	if (!info->screen_base) {
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 505be88..369f2ee 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -28,7 +28,7 @@
 struct virtio_balloon
 {
 	struct virtio_device *vdev;
-	struct virtqueue *inflate_vq, *deflate_vq;
+	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
 
 	/* Where the ballooning thread waits for config to change. */
 	wait_queue_head_t config_change;
@@ -49,6 +49,10 @@
 	/* The array of pfns we tell the Host about. */
 	unsigned int num_pfns;
 	u32 pfns[256];
+
+	/* Memory statistics */
+	int need_stats_update;
+	struct virtio_balloon_stat stats[VIRTIO_BALLOON_S_NR];
 };
 
 static struct virtio_device_id id_table[] = {
@@ -154,6 +158,72 @@
 	}
 }
 
+static inline void update_stat(struct virtio_balloon *vb, int idx,
+			       u16 tag, u64 val)
+{
+	BUG_ON(idx >= VIRTIO_BALLOON_S_NR);
+	vb->stats[idx].tag = tag;
+	vb->stats[idx].val = val;
+}
+
+#define pages_to_bytes(x) ((u64)(x) << PAGE_SHIFT)
+
+static void update_balloon_stats(struct virtio_balloon *vb)
+{
+	unsigned long events[NR_VM_EVENT_ITEMS];
+	struct sysinfo i;
+	int idx = 0;
+
+	all_vm_events(events);
+	si_meminfo(&i);
+
+	update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_IN,
+				pages_to_bytes(events[PSWPIN]));
+	update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_OUT,
+				pages_to_bytes(events[PSWPOUT]));
+	update_stat(vb, idx++, VIRTIO_BALLOON_S_MAJFLT, events[PGMAJFAULT]);
+	update_stat(vb, idx++, VIRTIO_BALLOON_S_MINFLT, events[PGFAULT]);
+	update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMFREE,
+				pages_to_bytes(i.freeram));
+	update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMTOT,
+				pages_to_bytes(i.totalram));
+}
+
+/*
+ * While most virtqueues communicate guest-initiated requests to the hypervisor,
+ * the stats queue operates in reverse.  The driver initializes the virtqueue
+ * with a single buffer.  From that point forward, all conversations consist of
+ * a hypervisor request (a call to this function) which directs us to refill
+ * the virtqueue with a fresh stats buffer.  Since stats collection can sleep,
+ * we notify our kthread which does the actual work via stats_handle_request().
+ */
+static void stats_request(struct virtqueue *vq)
+{
+	struct virtio_balloon *vb;
+	unsigned int len;
+
+	vb = vq->vq_ops->get_buf(vq, &len);
+	if (!vb)
+		return;
+	vb->need_stats_update = 1;
+	wake_up(&vb->config_change);
+}
+
+static void stats_handle_request(struct virtio_balloon *vb)
+{
+	struct virtqueue *vq;
+	struct scatterlist sg;
+
+	vb->need_stats_update = 0;
+	update_balloon_stats(vb);
+
+	vq = vb->stats_vq;
+	sg_init_one(&sg, vb->stats, sizeof(vb->stats));
+	if (vq->vq_ops->add_buf(vq, &sg, 1, 0, vb) < 0)
+		BUG();
+	vq->vq_ops->kick(vq);
+}
+
 static void virtballoon_changed(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb = vdev->priv;
@@ -190,8 +260,11 @@
 		try_to_freeze();
 		wait_event_interruptible(vb->config_change,
 					 (diff = towards_target(vb)) != 0
+					 || vb->need_stats_update
 					 || kthread_should_stop()
 					 || freezing(current));
+		if (vb->need_stats_update)
+			stats_handle_request(vb);
 		if (diff > 0)
 			fill_balloon(vb, diff);
 		else if (diff < 0)
@@ -204,10 +277,10 @@
 static int virtballoon_probe(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb;
-	struct virtqueue *vqs[2];
-	vq_callback_t *callbacks[] = { balloon_ack, balloon_ack };
-	const char *names[] = { "inflate", "deflate" };
-	int err;
+	struct virtqueue *vqs[3];
+	vq_callback_t *callbacks[] = { balloon_ack, balloon_ack, stats_request };
+	const char *names[] = { "inflate", "deflate", "stats" };
+	int err, nvqs;
 
 	vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL);
 	if (!vb) {
@@ -219,14 +292,31 @@
 	vb->num_pages = 0;
 	init_waitqueue_head(&vb->config_change);
 	vb->vdev = vdev;
+	vb->need_stats_update = 0;
 
-	/* We expect two virtqueues. */
-	err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names);
+	/* We expect two virtqueues: inflate and deflate,
+	 * and optionally stat. */
+	nvqs = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ) ? 3 : 2;
+	err = vdev->config->find_vqs(vdev, nvqs, vqs, callbacks, names);
 	if (err)
 		goto out_free_vb;
 
 	vb->inflate_vq = vqs[0];
 	vb->deflate_vq = vqs[1];
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
+		struct scatterlist sg;
+		vb->stats_vq = vqs[2];
+
+		/*
+		 * Prime this virtqueue with one buffer so the hypervisor can
+		 * use it to signal us later.
+		 */
+		sg_init_one(&sg, vb->stats, sizeof vb->stats);
+		if (vb->stats_vq->vq_ops->add_buf(vb->stats_vq,
+						  &sg, 1, 0, vb) < 0)
+			BUG();
+		vb->stats_vq->vq_ops->kick(vb->stats_vq);
+	}
 
 	vb->thread = kthread_run(balloon, vb, "vballoon");
 	if (IS_ERR(vb->thread)) {
@@ -264,7 +354,10 @@
 	kfree(vb);
 }
 
-static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
+static unsigned int features[] = {
+	VIRTIO_BALLOON_F_MUST_TELL_HOST,
+	VIRTIO_BALLOON_F_STATS_VQ,
+};
 
 static struct virtio_driver virtio_balloon_driver = {
 	.feature_table = features,
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 28d9cf7..1d5191f 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -702,7 +702,7 @@
 	.name		= "virtio-pci",
 	.id_table	= virtio_pci_id_table,
 	.probe		= virtio_pci_probe,
-	.remove		= virtio_pci_remove,
+	.remove		= __devexit_p(virtio_pci_remove),
 #ifdef CONFIG_PM
 	.suspend	= virtio_pci_suspend,
 	.resume		= virtio_pci_resume,
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index fbd2ecd..0db906b 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -21,6 +21,24 @@
 #include <linux/virtio_config.h>
 #include <linux/device.h>
 
+/* virtio guest is communicating with a virtual "device" that actually runs on
+ * a host processor.  Memory barriers are used to control SMP effects. */
+#ifdef CONFIG_SMP
+/* Where possible, use SMP barriers which are more lightweight than mandatory
+ * barriers, because mandatory barriers control MMIO effects on accesses
+ * through relaxed memory I/O windows (which virtio does not use). */
+#define virtio_mb() smp_mb()
+#define virtio_rmb() smp_rmb()
+#define virtio_wmb() smp_wmb()
+#else
+/* We must force memory ordering even if guest is UP since host could be
+ * running on another CPU, but SMP barriers are defined to barrier() in that
+ * configuration. So fall back to mandatory barriers instead. */
+#define virtio_mb() mb()
+#define virtio_rmb() rmb()
+#define virtio_wmb() wmb()
+#endif
+
 #ifdef DEBUG
 /* For development, we want to crash whenever the ring is screwed. */
 #define BAD_RING(_vq, fmt, args...)				\
@@ -36,10 +54,9 @@
 			panic("%s:in_use = %i\n",		\
 			      (_vq)->vq.name, (_vq)->in_use);	\
 		(_vq)->in_use = __LINE__;			\
-		mb();						\
 	} while (0)
 #define END_USE(_vq) \
-	do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; mb(); } while(0)
+	do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; } while(0)
 #else
 #define BAD_RING(_vq, fmt, args...)				\
 	do {							\
@@ -221,13 +238,13 @@
 	START_USE(vq);
 	/* Descriptors and available array need to be set before we expose the
 	 * new available array entries. */
-	wmb();
+	virtio_wmb();
 
 	vq->vring.avail->idx += vq->num_added;
 	vq->num_added = 0;
 
 	/* Need to update avail index before checking if we should notify */
-	mb();
+	virtio_mb();
 
 	if (!(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY))
 		/* Prod other side to tell it about changes. */
@@ -286,7 +303,7 @@
 	}
 
 	/* Only get used array entries after they have been exposed by host. */
-	rmb();
+	virtio_rmb();
 
 	i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id;
 	*len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len;
@@ -324,7 +341,7 @@
 	/* We optimistically turn back on interrupts, then check if there was
 	 * more to do. */
 	vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT;
-	mb();
+	virtio_mb();
 	if (unlikely(more_used(vq))) {
 		END_USE(vq);
 		return false;
@@ -334,6 +351,30 @@
 	return true;
 }
 
+static void *vring_detach_unused_buf(struct virtqueue *_vq)
+{
+	struct vring_virtqueue *vq = to_vvq(_vq);
+	unsigned int i;
+	void *buf;
+
+	START_USE(vq);
+
+	for (i = 0; i < vq->vring.num; i++) {
+		if (!vq->data[i])
+			continue;
+		/* detach_buf clears data, so grab it now. */
+		buf = vq->data[i];
+		detach_buf(vq, i);
+		END_USE(vq);
+		return buf;
+	}
+	/* That should have freed everything. */
+	BUG_ON(vq->num_free != vq->vring.num);
+
+	END_USE(vq);
+	return NULL;
+}
+
 irqreturn_t vring_interrupt(int irq, void *_vq)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
@@ -360,6 +401,7 @@
 	.kick = vring_kick,
 	.disable_cb = vring_disable_cb,
 	.enable_cb = vring_enable_cb,
+	.detach_unused_buf = vring_detach_unused_buf,
 };
 
 struct virtqueue *vring_new_virtqueue(unsigned int num,
@@ -406,8 +448,11 @@
 	/* Put everything in free lists. */
 	vq->num_free = num;
 	vq->free_head = 0;
-	for (i = 0; i < num-1; i++)
+	for (i = 0; i < num-1; i++) {
 		vq->vring.desc[i].next = i+1;
+		vq->data[i] = NULL;
+	}
+	vq->data[i] = NULL;
 
 	return &vq->vq;
 }
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index c7b3f9d..2159e66 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -1,9 +1,8 @@
 /*
  * Blackfin On-Chip Watchdog Driver
- *  Supports BF53[123]/BF53[467]/BF54[2489]/BF561
  *
  * Originally based on softdog.c
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2010 Analog Devices Inc.
  * Copyright 2006-2007 Michele d'Amico
  * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
@@ -137,13 +136,15 @@
  */
 static int bfin_wdt_set_timeout(unsigned long t)
 {
-	u32 cnt;
+	u32 cnt, max_t, sclk;
 	unsigned long flags;
 
-	stampit();
+	sclk = get_sclk();
+	max_t = -1 / sclk;
+	cnt = t * sclk;
+	stamp("maxtimeout=%us newtimeout=%lus (cnt=%#x)", max_t, t, cnt);
 
-	cnt = t * get_sclk();
-	if (cnt < get_sclk()) {
+	if (t > max_t) {
 		printk(KERN_WARNING PFX "timeout value is too large\n");
 		return -EINVAL;
 	}
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 9d08096..6ed434a 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -720,13 +720,15 @@
 					inode->i_ino, orig_offset);
 		BUG_ON(ret);
 	}
-	fi = btrfs_item_ptr(leaf, path->slots[0],
-			   struct btrfs_file_extent_item);
 	if (del_nr == 0) {
+		fi = btrfs_item_ptr(leaf, path->slots[0],
+			   struct btrfs_file_extent_item);
 		btrfs_set_file_extent_type(leaf, fi,
 					   BTRFS_FILE_EXTENT_REG);
 		btrfs_mark_buffer_dirty(leaf);
 	} else {
+		fi = btrfs_item_ptr(leaf, del_slot - 1,
+			   struct btrfs_file_extent_item);
 		btrfs_set_file_extent_type(leaf, fi,
 					   BTRFS_FILE_EXTENT_REG);
 		btrfs_set_file_extent_num_bytes(leaf, fi,
diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c
index 14ac480..eeb4986 100644
--- a/fs/cachefiles/namei.c
+++ b/fs/cachefiles/namei.c
@@ -348,7 +348,17 @@
 	dir = dget_parent(object->dentry);
 
 	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
-	ret = cachefiles_bury_object(cache, dir, object->dentry);
+
+	/* we need to check that our parent is _still_ our parent - it may have
+	 * been renamed */
+	if (dir == object->dentry->d_parent) {
+		ret = cachefiles_bury_object(cache, dir, object->dentry);
+	} else {
+		/* it got moved, presumably by cachefilesd culling it, so it's
+		 * no longer in the key path and we can ignore it */
+		mutex_unlock(&dir->d_inode->i_mutex);
+		ret = 0;
+	}
 
 	dput(dir);
 	_leave(" = %d", ret);
diff --git a/fs/exec.c b/fs/exec.c
index e95c692..cce6bbd 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -637,7 +637,6 @@
 	 * will align it up.
 	 */
 	rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK;
-	rlim_stack = min(rlim_stack, stack_size);
 #ifdef CONFIG_STACK_GROWSUP
 	if (stack_size + stack_expand > rlim_stack)
 		stack_base = vma->vm_start + rlim_stack;
diff --git a/fs/namei.c b/fs/namei.c
index d62fdc8..a4855af 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -823,6 +823,17 @@
 }
 
 /*
+ * This is a temporary kludge to deal with "automount" symlinks; proper
+ * solution is to trigger them on follow_mount(), so that do_lookup()
+ * would DTRT.  To be killed before 2.6.34-final.
+ */
+static inline int follow_on_final(struct inode *inode, unsigned lookup_flags)
+{
+	return inode && unlikely(inode->i_op->follow_link) &&
+		((lookup_flags & LOOKUP_FOLLOW) || S_ISDIR(inode->i_mode));
+}
+
+/*
  * Name resolution.
  * This is the basic name resolution function, turning a pathname into
  * the final dentry. We expect 'base' to be positive and a directory.
@@ -942,8 +953,7 @@
 		if (err)
 			break;
 		inode = next.dentry->d_inode;
-		if ((lookup_flags & LOOKUP_FOLLOW)
-		    && inode && inode->i_op->follow_link) {
+		if (follow_on_final(inode, lookup_flags)) {
 			err = do_follow_link(&next, nd);
 			if (err)
 				goto return_err;
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index e1d415e..0d28982 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -342,6 +342,7 @@
 		data->res.fattr = &data->fattr;
 		data->res.eof = 0;
 		data->res.count = bytes;
+		nfs_fattr_init(&data->fattr);
 		msg.rpc_argp = &data->args;
 		msg.rpc_resp = &data->res;
 
@@ -575,6 +576,7 @@
 	data->res.count = 0;
 	data->res.fattr = &data->fattr;
 	data->res.verf = &data->verf;
+	nfs_fattr_init(&data->fattr);
 
 	NFS_PROTO(data->inode)->commit_setup(data, &msg);
 
@@ -766,6 +768,7 @@
 		data->res.fattr = &data->fattr;
 		data->res.count = bytes;
 		data->res.verf = &data->verf;
+		nfs_fattr_init(&data->fattr);
 
 		task_setup_data.task = &data->task;
 		task_setup_data.callback_data = data;
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 97d79ef..8715d19 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -752,7 +752,8 @@
 			    flags, current_cred());
 	if (IS_ERR(*filp))
 		host_err = PTR_ERR(*filp);
-	host_err = ima_file_check(*filp, access);
+	else
+		host_err = ima_file_check(*filp, access);
 out_nfserr:
 	err = nfserrno(host_err);
 out:
diff --git a/fs/proc/base.c b/fs/proc/base.c
index e42bbd8..58324c2 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2369,16 +2369,30 @@
 {
 	struct pid_namespace *ns = dentry->d_sb->s_fs_info;
 	pid_t tgid = task_tgid_nr_ns(current, ns);
-	char tmp[PROC_NUMBUF];
-	if (!tgid)
-		return ERR_PTR(-ENOENT);
-	sprintf(tmp, "%d", task_tgid_nr_ns(current, ns));
-	return ERR_PTR(vfs_follow_link(nd,tmp));
+	char *name = ERR_PTR(-ENOENT);
+	if (tgid) {
+		name = __getname();
+		if (!name)
+			name = ERR_PTR(-ENOMEM);
+		else
+			sprintf(name, "%d", tgid);
+	}
+	nd_set_link(nd, name);
+	return NULL;
+}
+
+static void proc_self_put_link(struct dentry *dentry, struct nameidata *nd,
+				void *cookie)
+{
+	char *s = nd_get_link(nd);
+	if (!IS_ERR(s))
+		__putname(s);
 }
 
 static const struct inode_operations proc_self_inode_operations = {
 	.readlink	= proc_self_readlink,
 	.follow_link	= proc_self_follow_link,
+	.put_link	= proc_self_put_link,
 };
 
 /*
diff --git a/fs/proc/proc_devtree.c b/fs/proc/proc_devtree.c
index 123257b..f8650dc 100644
--- a/fs/proc/proc_devtree.c
+++ b/fs/proc/proc_devtree.c
@@ -10,16 +10,19 @@
 #include <linux/seq_file.h>
 #include <linux/stat.h>
 #include <linux/string.h>
+#include <linux/of.h>
+#include <linux/module.h>
 #include <asm/prom.h>
 #include <asm/uaccess.h>
 #include "internal.h"
 
-#ifndef HAVE_ARCH_DEVTREE_FIXUPS
 static inline void set_node_proc_entry(struct device_node *np,
 				       struct proc_dir_entry *de)
 {
-}
+#ifdef HAVE_ARCH_DEVTREE_FIXUPS
+	np->pde = de;
 #endif
+}
 
 static struct proc_dir_entry *proc_device_tree;
 
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 9087b10..2df0f5c 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1497,9 +1497,11 @@
 
 	args.objectid = key->on_disk_key.k_objectid;
 	args.dirid = key->on_disk_key.k_dir_id;
+	reiserfs_write_unlock(s);
 	inode = iget5_locked(s, key->on_disk_key.k_objectid,
 			     reiserfs_find_actor, reiserfs_init_locked_inode,
 			     (void *)(&args));
+	reiserfs_write_lock(s);
 	if (!inode)
 		return ERR_PTR(-ENOMEM);
 
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 220b758..6a06a1d 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -81,24 +81,23 @@
 		if (!sd_attrs)
 			return -ENOMEM;
 		sd->s_iattr = sd_attrs;
-	} else {
-		/* attributes were changed at least once in past */
-		iattrs = &sd_attrs->ia_iattr;
+	}
+	/* attributes were changed at least once in past */
+	iattrs = &sd_attrs->ia_iattr;
 
-		if (ia_valid & ATTR_UID)
-			iattrs->ia_uid = iattr->ia_uid;
-		if (ia_valid & ATTR_GID)
-			iattrs->ia_gid = iattr->ia_gid;
-		if (ia_valid & ATTR_ATIME)
-			iattrs->ia_atime = iattr->ia_atime;
-		if (ia_valid & ATTR_MTIME)
-			iattrs->ia_mtime = iattr->ia_mtime;
-		if (ia_valid & ATTR_CTIME)
-			iattrs->ia_ctime = iattr->ia_ctime;
-		if (ia_valid & ATTR_MODE) {
-			umode_t mode = iattr->ia_mode;
-			iattrs->ia_mode = sd->s_mode = mode;
-		}
+	if (ia_valid & ATTR_UID)
+		iattrs->ia_uid = iattr->ia_uid;
+	if (ia_valid & ATTR_GID)
+		iattrs->ia_gid = iattr->ia_gid;
+	if (ia_valid & ATTR_ATIME)
+		iattrs->ia_atime = iattr->ia_atime;
+	if (ia_valid & ATTR_MTIME)
+		iattrs->ia_mtime = iattr->ia_mtime;
+	if (ia_valid & ATTR_CTIME)
+		iattrs->ia_ctime = iattr->ia_ctime;
+	if (ia_valid & ATTR_MODE) {
+		umode_t mode = iattr->ia_mode;
+		iattrs->ia_mode = sd->s_mode = mode;
 	}
 	return 0;
 }
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 3cd9ccd..54508cc 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -242,6 +242,8 @@
 struct acpi_device_wakeup_flags {
 	u8 valid:1;		/* Can successfully enable wakeup? */
 	u8 run_wake:1;		/* Run-Wake GPE devices */
+	u8 always_enabled:1;	/* Run-wake devices that are always enabled */
+	u8 notifier_present:1;  /* Wake-up notify handler has been installed */
 };
 
 struct acpi_device_wakeup_state {
@@ -256,6 +258,7 @@
 	struct acpi_device_wakeup_state state;
 	struct acpi_device_wakeup_flags flags;
 	int prepare_count;
+	int run_wake_count;
 };
 
 /* Device */
@@ -386,6 +389,9 @@
 struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
 #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
 
+int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
+int acpi_disable_wakeup_device_power(struct acpi_device *dev);
+
 #ifdef CONFIG_PM_SLEEP
 int acpi_pm_device_sleep_state(struct device *, int *);
 int acpi_pm_device_sleep_wake(struct device *, bool);
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index f4906f6..3a4767c 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -104,6 +104,7 @@
 
 struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain,
 				   int bus);
+void pci_acpi_crs_quirks(void);
 
 /* --------------------------------------------------------------------------
                                     Processor
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 86e9735..3988f93 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -281,11 +281,11 @@
 /*
  * GPE Interfaces
  */
-acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type);
+acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action);
 
-acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number);
+acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type);
 
-acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number);
+acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type);
 
 acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags);
 
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 153f12d..73af408 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -668,15 +668,16 @@
 
 /*
  * GPE info flags - Per GPE
- * +-+-+-+---+---+-+
- * |7|6|5|4:3|2:1|0|
- * +-+-+-+---+---+-+
- *  | | |  |   |  |
- *  | | |  |   |  +--- Interrupt type: Edge or Level Triggered
- *  | | |  |   +--- Type: Wake-only, Runtime-only, or wake/runtime
+ * +-+-+-+---+-+-+-+
+ * |7|6|5|4:3|2|1|0|
+ * +-+-+-+---+-+-+-+
+ *  | | |  |  | | |
+ *  | | |  |  | | +--- Interrupt type: Edge or Level Triggered
+ *  | | |  |  | +--- GPE can wake the system
+ *  | | |  |  +--- Unused
  *  | | |  +--- Type of dispatch -- to method, handler, or none
- *  | | +--- Enabled for runtime?
- *  | +--- Enabled for wake?
+ *  | | +--- Unused
+ *  | +--- Unused
  *  +--- Unused
  */
 #define ACPI_GPE_XRUPT_TYPE_MASK        (u8) 0x01
@@ -687,22 +688,13 @@
 #define ACPI_GPE_TYPE_WAKE_RUN          (u8) 0x06
 #define ACPI_GPE_TYPE_WAKE              (u8) 0x02
 #define ACPI_GPE_TYPE_RUNTIME           (u8) 0x04	/* Default */
+#define ACPI_GPE_CAN_WAKE		(u8) 0x02
 
 #define ACPI_GPE_DISPATCH_MASK          (u8) 0x18
 #define ACPI_GPE_DISPATCH_HANDLER       (u8) 0x08
 #define ACPI_GPE_DISPATCH_METHOD        (u8) 0x10
 #define ACPI_GPE_DISPATCH_NOT_USED      (u8) 0x00	/* Default */
 
-#define ACPI_GPE_RUN_ENABLE_MASK        (u8) 0x20
-#define ACPI_GPE_RUN_ENABLED            (u8) 0x20
-#define ACPI_GPE_RUN_DISABLED           (u8) 0x00	/* Default */
-
-#define ACPI_GPE_WAKE_ENABLE_MASK       (u8) 0x40
-#define ACPI_GPE_WAKE_ENABLED           (u8) 0x40
-#define ACPI_GPE_WAKE_DISABLED          (u8) 0x00	/* Default */
-
-#define ACPI_GPE_ENABLE_MASK            (u8) 0x60	/* Both run/wake */
-
 /*
  * Flags for GPE and Lock interfaces
  */
diff --git a/include/crypto/md5.h b/include/crypto/md5.h
new file mode 100644
index 0000000..65f299b
--- /dev/null
+++ b/include/crypto/md5.h
@@ -0,0 +1,17 @@
+#ifndef _CRYPTO_MD5_H
+#define _CRYPTO_MD5_H
+
+#include <linux/types.h>
+
+#define MD5_DIGEST_SIZE		16
+#define MD5_HMAC_BLOCK_SIZE	64
+#define MD5_BLOCK_WORDS		16
+#define MD5_HASH_WORDS		4
+
+struct md5_state {
+	u32 hash[MD5_HASH_WORDS];
+	u32 block[MD5_BLOCK_WORDS];
+	u64 byte_count;
+};
+
+#endif
diff --git a/include/crypto/pcrypt.h b/include/crypto/pcrypt.h
new file mode 100644
index 0000000..d7d8bd8
--- /dev/null
+++ b/include/crypto/pcrypt.h
@@ -0,0 +1,51 @@
+/*
+ * pcrypt - Parallel crypto engine.
+ *
+ * Copyright (C) 2009 secunet Security Networks AG
+ * Copyright (C) 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _CRYPTO_PCRYPT_H
+#define _CRYPTO_PCRYPT_H
+
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/padata.h>
+
+struct pcrypt_request {
+	struct padata_priv	padata;
+	void			*data;
+	void			*__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+static inline void *pcrypt_request_ctx(struct pcrypt_request *req)
+{
+	return req->__ctx;
+}
+
+static inline
+struct padata_priv *pcrypt_request_padata(struct pcrypt_request *req)
+{
+	return &req->padata;
+}
+
+static inline
+struct pcrypt_request *pcrypt_padata_request(struct padata_priv *padata)
+{
+	return container_of(padata, struct pcrypt_request, padata);
+}
+
+#endif
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index ab94335..6816be6 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -1,5 +1,9 @@
 /*
- *  linux/include/asm-arm/hardware/amba.h
+ *  linux/include/amba/bus.h
+ *
+ *  This device type deals with ARM PrimeCells and anything else that
+ *  presents a proper CID (0xB105F00D) at the end of the I/O register
+ *  region or that is derived from a PrimeCell.
  *
  *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
  *
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 5c80189..1896e86 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -461,8 +461,7 @@
 #define QUEUE_FLAG_NONROT      14	/* non-rotational device (SSD) */
 #define QUEUE_FLAG_VIRT        QUEUE_FLAG_NONROT /* paravirt device */
 #define QUEUE_FLAG_IO_STAT     15	/* do IO stats */
-#define QUEUE_FLAG_CQ	       16	/* hardware does queuing */
-#define QUEUE_FLAG_DISCARD     17	/* supports DISCARD */
+#define QUEUE_FLAG_DISCARD     16	/* supports DISCARD */
 
 #define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
 				 (1 << QUEUE_FLAG_CLUSTER) |		\
@@ -586,7 +585,6 @@
 
 #define blk_queue_plugged(q)	test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags)
 #define blk_queue_tagged(q)	test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags)
-#define blk_queue_queuing(q)	test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags)
 #define blk_queue_stopped(q)	test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
 #define blk_queue_nomerges(q)	test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
 #define blk_queue_nonrot(q)	test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index b1bcb27..ebb1cd5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -729,6 +729,7 @@
 	uid_t			i_uid;
 	gid_t			i_gid;
 	dev_t			i_rdev;
+	unsigned int		i_blkbits;
 	u64			i_version;
 	loff_t			i_size;
 #ifdef __NEED_I_SIZE_ORDERED
@@ -738,7 +739,6 @@
 	struct timespec		i_mtime;
 	struct timespec		i_ctime;
 	blkcnt_t		i_blocks;
-	unsigned int		i_blkbits;
 	unsigned short          i_bytes;
 	umode_t			i_mode;
 	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 8709365..b1344ec 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -501,7 +501,7 @@
 	void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
 
 	/* handler for raw output data, used by hidraw */
-	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t);
+	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
 
 	/* debugging support via debugfs */
 	unsigned short debug;
@@ -663,7 +663,7 @@
 
 /* Applications from HID Usage Tables 4/8/99 Version 1.1 */
 /* We ignore a few input applications that are not widely used */
-#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002))
+#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || ((a >= 0x000d0002) && (a <= 0x000d0006)))
 
 /* HID core API */
 
@@ -690,6 +690,7 @@
 int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
 void hid_output_report(struct hid_report *report, __u8 *data);
 struct hid_device *hid_allocate_device(void);
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
 int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
 int hid_check_keys_pressed(struct hid_device *hid);
 int hid_connect(struct hid_device *hid, unsigned int connect_mask);
diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
index 070ba06..5977b72 100644
--- a/include/linux/hw_breakpoint.h
+++ b/include/linux/hw_breakpoint.h
@@ -44,7 +44,7 @@
 	return bp->attr.bp_type;
 }
 
-static inline int hw_breakpoint_len(struct perf_event *bp)
+static inline unsigned long hw_breakpoint_len(struct perf_event *bp)
 {
 	return bp->attr.bp_len;
 }
diff --git a/include/linux/input.h b/include/linux/input.h
index 735ceaf..f44ee91 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -376,6 +376,7 @@
 #define KEY_DISPLAY_OFF		245	/* display device to off state */
 
 #define KEY_WIMAX		246
+#define KEY_RFKILL		247	/* Key that controls all radios */
 
 /* Range 248 - 255 is reserved for special needs of AT keyboard driver */
 
@@ -597,6 +598,48 @@
 
 #define KEY_CAMERA_FOCUS	0x210
 
+#define BTN_TRIGGER_HAPPY		0x2c0
+#define BTN_TRIGGER_HAPPY1		0x2c0
+#define BTN_TRIGGER_HAPPY2		0x2c1
+#define BTN_TRIGGER_HAPPY3		0x2c2
+#define BTN_TRIGGER_HAPPY4		0x2c3
+#define BTN_TRIGGER_HAPPY5		0x2c4
+#define BTN_TRIGGER_HAPPY6		0x2c5
+#define BTN_TRIGGER_HAPPY7		0x2c6
+#define BTN_TRIGGER_HAPPY8		0x2c7
+#define BTN_TRIGGER_HAPPY9		0x2c8
+#define BTN_TRIGGER_HAPPY10		0x2c9
+#define BTN_TRIGGER_HAPPY11		0x2ca
+#define BTN_TRIGGER_HAPPY12		0x2cb
+#define BTN_TRIGGER_HAPPY13		0x2cc
+#define BTN_TRIGGER_HAPPY14		0x2cd
+#define BTN_TRIGGER_HAPPY15		0x2ce
+#define BTN_TRIGGER_HAPPY16		0x2cf
+#define BTN_TRIGGER_HAPPY17		0x2d0
+#define BTN_TRIGGER_HAPPY18		0x2d1
+#define BTN_TRIGGER_HAPPY19		0x2d2
+#define BTN_TRIGGER_HAPPY20		0x2d3
+#define BTN_TRIGGER_HAPPY21		0x2d4
+#define BTN_TRIGGER_HAPPY22		0x2d5
+#define BTN_TRIGGER_HAPPY23		0x2d6
+#define BTN_TRIGGER_HAPPY24		0x2d7
+#define BTN_TRIGGER_HAPPY25		0x2d8
+#define BTN_TRIGGER_HAPPY26		0x2d9
+#define BTN_TRIGGER_HAPPY27		0x2da
+#define BTN_TRIGGER_HAPPY28		0x2db
+#define BTN_TRIGGER_HAPPY29		0x2dc
+#define BTN_TRIGGER_HAPPY30		0x2dd
+#define BTN_TRIGGER_HAPPY31		0x2de
+#define BTN_TRIGGER_HAPPY32		0x2df
+#define BTN_TRIGGER_HAPPY33		0x2e0
+#define BTN_TRIGGER_HAPPY34		0x2e1
+#define BTN_TRIGGER_HAPPY35		0x2e2
+#define BTN_TRIGGER_HAPPY36		0x2e3
+#define BTN_TRIGGER_HAPPY37		0x2e4
+#define BTN_TRIGGER_HAPPY38		0x2e5
+#define BTN_TRIGGER_HAPPY39		0x2e6
+#define BTN_TRIGGER_HAPPY40		0x2e7
+
 /* We avoid low common keys in module aliases so they don't get huge. */
 #define KEY_MIN_INTERESTING	KEY_MUTE
 #define KEY_MAX			0x2ff
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 7129504..dda9841 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -112,6 +112,7 @@
 
 extern int request_resource(struct resource *root, struct resource *new);
 extern int release_resource(struct resource *new);
+void release_child_resources(struct resource *new);
 extern void reserve_region_with_split(struct resource *root,
 			     resource_size_t start, resource_size_t end,
 			     const char *name);
@@ -120,8 +121,10 @@
 extern int allocate_resource(struct resource *root, struct resource *new,
 			     resource_size_t size, resource_size_t min,
 			     resource_size_t max, resource_size_t align,
-			     void (*alignf)(void *, struct resource *,
-					    resource_size_t, resource_size_t),
+			     resource_size_t (*alignf)(void *,
+						       const struct resource *,
+						       resource_size_t,
+						       resource_size_t),
 			     void *alignf_data);
 int adjust_resource(struct resource *res, resource_size_t start,
 		    resource_size_t size);
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 6f6c5f3..bc0fc79 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -124,7 +124,7 @@
  */
 static inline bool kfifo_initialized(struct kfifo *fifo)
 {
-	return fifo->buffer != 0;
+	return fifo->buffer != NULL;
 }
 
 /**
diff --git a/include/linux/of.h b/include/linux/of.h
index e7facd8..f6d9cbc 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -19,6 +19,11 @@
 #include <linux/bitops.h>
 #include <linux/kref.h>
 #include <linux/mod_devicetable.h>
+#include <linux/spinlock.h>
+
+#include <asm/byteorder.h>
+
+#ifdef CONFIG_OF
 
 typedef u32 phandle;
 typedef u32 ihandle;
@@ -39,10 +44,7 @@
 struct device_node {
 	const char *name;
 	const char *type;
-	phandle	node;
-#if !defined(CONFIG_SPARC)
-	phandle linux_phandle;
-#endif
+	phandle phandle;
 	char	*full_name;
 
 	struct	property *properties;
@@ -63,6 +65,11 @@
 #endif
 };
 
+/* Pointer for first entry in chain of all nodes. */
+extern struct device_node *allnodes;
+extern struct device_node *of_chosen;
+extern rwlock_t devtree_lock;
+
 static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
 {
 	return test_bit(flag, &n->_flags);
@@ -73,12 +80,6 @@
 	set_bit(flag, &n->_flags);
 }
 
-static inline void
-set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
-{
-	dn->pde = de;
-}
-
 extern struct device_node *of_find_all_nodes(struct device_node *prev);
 
 #if defined(CONFIG_SPARC)
@@ -101,26 +102,36 @@
  */
 
 /* Helper to read a big number; size is in cells (not bytes) */
-static inline u64 of_read_number(const u32 *cell, int size)
+static inline u64 of_read_number(const __be32 *cell, int size)
 {
 	u64 r = 0;
 	while (size--)
-		r = (r << 32) | *(cell++);
+		r = (r << 32) | be32_to_cpu(*(cell++));
 	return r;
 }
 
 /* Like of_read_number, but we want an unsigned long result */
-#ifdef CONFIG_PPC32
-static inline unsigned long of_read_ulong(const u32 *cell, int size)
+static inline unsigned long of_read_ulong(const __be32 *cell, int size)
 {
-	return cell[size-1];
+	/* toss away upper bits if unsigned long is smaller than u64 */
+	return of_read_number(cell, size);
 }
-#else
-#define of_read_ulong(cell, size)	of_read_number(cell, size)
-#endif
 
 #include <asm/prom.h>
 
+/* Default #address and #size cells.  Allow arch asm/prom.h to override */
+#if !defined(OF_ROOT_NODE_ADDR_CELLS_DEFAULT)
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
+#endif
+
+/* Default string compare functions, Allow arch asm/prom.h to override */
+#if !defined(of_compat_cmp)
+#define of_compat_cmp(s1, s2, l)	strncasecmp((s1), (s2), (l))
+#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
+#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
+#endif
+
 /* flag descriptions */
 #define OF_DYNAMIC	1 /* node and properties were allocated via kmalloc */
 #define OF_DETACHED	2 /* node has been detached from the device tree */
@@ -187,4 +198,19 @@
 	const char *list_name, const char *cells_name, int index,
 	struct device_node **out_node, const void **out_args);
 
+extern int of_machine_is_compatible(const char *compat);
+
+extern int prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+				struct property *newprop,
+				struct property *oldprop);
+
+#if defined(CONFIG_OF_DYNAMIC)
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(struct device_node *);
+#endif
+
+#endif /* CONFIG_OF */
 #endif /* _LINUX_OF_H */
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index 41d432b..a1ca92c 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -42,45 +42,62 @@
  * ends when size is 0
  */
 struct boot_param_header {
-	u32	magic;			/* magic word OF_DT_HEADER */
-	u32	totalsize;		/* total size of DT block */
-	u32	off_dt_struct;		/* offset to structure */
-	u32	off_dt_strings;		/* offset to strings */
-	u32	off_mem_rsvmap;		/* offset to memory reserve map */
-	u32	version;		/* format version */
-	u32	last_comp_version;	/* last compatible version */
+	__be32	magic;			/* magic word OF_DT_HEADER */
+	__be32	totalsize;		/* total size of DT block */
+	__be32	off_dt_struct;		/* offset to structure */
+	__be32	off_dt_strings;		/* offset to strings */
+	__be32	off_mem_rsvmap;		/* offset to memory reserve map */
+	__be32	version;		/* format version */
+	__be32	last_comp_version;	/* last compatible version */
 	/* version 2 fields below */
-	u32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
+	__be32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
 	/* version 3 fields below */
-	u32	dt_strings_size;	/* size of the DT strings block */
+	__be32	dt_strings_size;	/* size of the DT strings block */
 	/* version 17 fields below */
-	u32	dt_struct_size;		/* size of the DT structure block */
+	__be32	dt_struct_size;		/* size of the DT structure block */
 };
 
+/* TBD: Temporary export of fdt globals - remove when code fully merged */
+extern int __initdata dt_root_addr_cells;
+extern int __initdata dt_root_size_cells;
+extern struct boot_param_header *initial_boot_params;
+
 /* For scanning the flat device-tree at boot time */
-extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
-					    const char *uname, int depth,
-					    void *data),
-				  void *data);
-extern void __init *of_get_flat_dt_prop(unsigned long node, const char *name,
-					unsigned long *size);
-extern int __init of_flat_dt_is_compatible(unsigned long node,
-					   const char *name);
-extern unsigned long __init of_get_flat_dt_root(void);
+extern char *find_flat_dt_string(u32 offset);
+extern int of_scan_flat_dt(int (*it)(unsigned long node, const char *uname,
+				     int depth, void *data),
+			   void *data);
+extern void *of_get_flat_dt_prop(unsigned long node, const char *name,
+				 unsigned long *size);
+extern int of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long of_get_flat_dt_root(void);
+extern void early_init_dt_scan_chosen_arch(unsigned long node);
+extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
+				     int depth, void *data);
+extern void early_init_dt_check_for_initrd(unsigned long node);
+extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
+				     int depth, void *data);
+extern void early_init_dt_add_memory_arch(u64 base, u64 size);
+extern u64 early_init_dt_alloc_memory_arch(u64 size, u64 align);
+extern u64 dt_mem_next_cell(int s, __be32 **cellp);
+
+/*
+ * If BLK_DEV_INITRD, the fdt early init code will call this function,
+ * to be provided by the arch code. start and end are specified as
+ * physical addresses.
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void early_init_dt_setup_initrd_arch(unsigned long start,
+					    unsigned long end);
+#endif
+
+/* Early flat tree scan hooks */
+extern int early_init_dt_scan_root(unsigned long node, const char *uname,
+				   int depth, void *data);
 
 /* Other Prototypes */
-extern void finish_device_tree(void);
 extern void unflatten_device_tree(void);
 extern void early_init_devtree(void *);
-extern int machine_is_compatible(const char *compat);
-extern void print_properties(struct device_node *node);
-extern int prom_n_intr_cells(struct device_node* np);
-extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern int prom_add_property(struct device_node* np, struct property* prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
-				struct property *newprop,
-				struct property *oldprop);
 
 #endif /* __ASSEMBLY__ */
 #endif /* _LINUX_OF_FDT_H */
diff --git a/include/linux/padata.h b/include/linux/padata.h
new file mode 100644
index 0000000..51611da
--- /dev/null
+++ b/include/linux/padata.h
@@ -0,0 +1,88 @@
+/*
+ * padata.h - header for the padata parallelization interface
+ *
+ * Copyright (C) 2008, 2009 secunet Security Networks AG
+ * Copyright (C) 2008, 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef PADATA_H
+#define PADATA_H
+
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+struct padata_priv {
+	struct list_head	list;
+	struct parallel_data	*pd;
+	int			cb_cpu;
+	int			seq_nr;
+	int			info;
+	void                    (*parallel)(struct padata_priv *padata);
+	void                    (*serial)(struct padata_priv *padata);
+};
+
+struct padata_list {
+	struct list_head        list;
+	spinlock_t              lock;
+};
+
+struct padata_queue {
+	struct padata_list	parallel;
+	struct padata_list	reorder;
+	struct padata_list	serial;
+	struct work_struct	pwork;
+	struct work_struct	swork;
+	struct parallel_data    *pd;
+	atomic_t		num_obj;
+	int			cpu_index;
+};
+
+struct parallel_data {
+	struct padata_instance	*pinst;
+	struct padata_queue	*queue;
+	atomic_t		seq_nr;
+	atomic_t		reorder_objects;
+	atomic_t                refcnt;
+	unsigned int		max_seq_nr;
+	cpumask_var_t		cpumask;
+	spinlock_t              lock;
+};
+
+struct padata_instance {
+	struct notifier_block   cpu_notifier;
+	struct workqueue_struct *wq;
+	struct parallel_data	*pd;
+	cpumask_var_t           cpumask;
+	struct mutex		lock;
+	u8			flags;
+#define	PADATA_INIT		1
+#define	PADATA_RESET		2
+};
+
+extern struct padata_instance *padata_alloc(const struct cpumask *cpumask,
+					    struct workqueue_struct *wq);
+extern void padata_free(struct padata_instance *pinst);
+extern int padata_do_parallel(struct padata_instance *pinst,
+			      struct padata_priv *padata, int cb_cpu);
+extern void padata_do_serial(struct padata_priv *padata);
+extern int padata_set_cpumask(struct padata_instance *pinst,
+			      cpumask_var_t cpumask);
+extern int padata_add_cpu(struct padata_instance *pinst, int cpu);
+extern int padata_remove_cpu(struct padata_instance *pinst, int cpu);
+extern void padata_start(struct padata_instance *pinst);
+extern void padata_stop(struct padata_instance *pinst);
+#endif
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 93a7c08f..c8b6473 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -11,6 +11,13 @@
 #include <linux/acpi.h>
 
 #ifdef CONFIG_ACPI
+extern acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
+						 struct pci_bus *pci_bus);
+extern acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev);
+extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
+					     struct pci_dev *pci_dev);
+extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev);
+
 static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
 {
 	struct pci_bus *pbus = pdev->bus;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c1968f4..e19a696 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -187,6 +187,33 @@
 	PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2,
 };
 
+/* Based on the PCI Hotplug Spec, but some values are made up by us */
+enum pci_bus_speed {
+	PCI_SPEED_33MHz			= 0x00,
+	PCI_SPEED_66MHz			= 0x01,
+	PCI_SPEED_66MHz_PCIX		= 0x02,
+	PCI_SPEED_100MHz_PCIX		= 0x03,
+	PCI_SPEED_133MHz_PCIX		= 0x04,
+	PCI_SPEED_66MHz_PCIX_ECC	= 0x05,
+	PCI_SPEED_100MHz_PCIX_ECC	= 0x06,
+	PCI_SPEED_133MHz_PCIX_ECC	= 0x07,
+	PCI_SPEED_66MHz_PCIX_266	= 0x09,
+	PCI_SPEED_100MHz_PCIX_266	= 0x0a,
+	PCI_SPEED_133MHz_PCIX_266	= 0x0b,
+	AGP_UNKNOWN			= 0x0c,
+	AGP_1X				= 0x0d,
+	AGP_2X				= 0x0e,
+	AGP_4X				= 0x0f,
+	AGP_8X				= 0x10,
+	PCI_SPEED_66MHz_PCIX_533	= 0x11,
+	PCI_SPEED_100MHz_PCIX_533	= 0x12,
+	PCI_SPEED_133MHz_PCIX_533	= 0x13,
+	PCIE_SPEED_2_5GT		= 0x14,
+	PCIE_SPEED_5_0GT		= 0x15,
+	PCIE_SPEED_8_0GT		= 0x16,
+	PCI_SPEED_UNKNOWN		= 0xff,
+};
+
 struct pci_cap_saved_state {
 	struct hlist_node next;
 	char cap_nr;
@@ -239,6 +266,7 @@
 					   configuration space */
 	unsigned int	pme_support:5;	/* Bitmask of states from which PME#
 					   can be generated */
+	unsigned int	pme_interrupt:1;
 	unsigned int	d1_support:1;	/* Low power state D1 is supported */
 	unsigned int	d2_support:1;	/* Low power state D2 is supported */
 	unsigned int	no_d1d2:1;	/* Only allow D0 and D3 */
@@ -275,7 +303,8 @@
 	unsigned int	msix_enabled:1;
 	unsigned int	ari_enabled:1;	/* ARI forwarding */
 	unsigned int	is_managed:1;
-	unsigned int	is_pcie:1;
+	unsigned int	is_pcie:1;	/* Obsolete. Will be removed.
+					   Use pci_is_pcie() instead */
 	unsigned int    needs_freset:1; /* Dev requires fundamental reset */
 	unsigned int	state_saved:1;
 	unsigned int	is_physfn:1;
@@ -335,9 +364,26 @@
 	hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space);
 }
 
-#ifndef PCI_BUS_NUM_RESOURCES
-#define PCI_BUS_NUM_RESOURCES	16
-#endif
+/*
+ * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond
+ * to P2P or CardBus bridge windows) go in a table.  Additional ones (for
+ * buses below host bridges or subtractive decode bridges) go in the list.
+ * Use pci_bus_for_each_resource() to iterate through all the resources.
+ */
+
+/*
+ * PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly
+ * and there's no way to program the bridge with the details of the window.
+ * This does not apply to ACPI _CRS windows, even with the _DEC subtractive-
+ * decode bit set, because they are explicit and can be programmed with _SRS.
+ */
+#define PCI_SUBTRACTIVE_DECODE	0x1
+
+struct pci_bus_resource {
+	struct list_head list;
+	struct resource *res;
+	unsigned int flags;
+};
 
 #define PCI_REGION_FLAG_MASK	0x0fU	/* These bits of resource flags tell us the PCI region flags */
 
@@ -348,8 +394,8 @@
 	struct list_head devices;	/* list of devices on this bus */
 	struct pci_dev	*self;		/* bridge device as seen by parent */
 	struct list_head slots;		/* list of slots on this bus */
-	struct resource	*resource[PCI_BUS_NUM_RESOURCES];
-					/* address space routed to this bus */
+	struct resource *resource[PCI_BRIDGE_RESOURCE_NUM];
+	struct list_head resources;	/* address space routed to this bus */
 
 	struct pci_ops	*ops;		/* configuration access functions */
 	void		*sysdata;	/* hook for sys-specific extension */
@@ -359,6 +405,8 @@
 	unsigned char	primary;	/* number of primary bridge */
 	unsigned char	secondary;	/* number of secondary bridge */
 	unsigned char	subordinate;	/* max number of subordinate buses */
+	unsigned char	max_bus_speed;	/* enum pci_bus_speed */
+	unsigned char	cur_bus_speed;	/* enum pci_bus_speed */
 
 	char		name[48];
 
@@ -563,7 +611,8 @@
 char *pcibios_setup(char *str);
 
 /* Used only when drivers/pci/setup.c is used */
-void pcibios_align_resource(void *, struct resource *, resource_size_t,
+resource_size_t pcibios_align_resource(void *, const struct resource *,
+				resource_size_t,
 				resource_size_t);
 void pcibios_update_irq(struct pci_dev *, int irq);
 
@@ -589,6 +638,7 @@
 			       struct pci_ops *ops, void *sysdata);
 struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
 				int busnr);
+void pcie_update_link_speed(struct pci_bus *bus, u16 link_status);
 struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
 				 const char *name,
 				 struct hotplug_slot *hotplug);
@@ -615,12 +665,6 @@
 
 /* Generic PCI functions exported to card drivers */
 
-#ifdef CONFIG_PCI_LEGACY
-struct pci_dev __deprecated *pci_find_device(unsigned int vendor,
-					     unsigned int device,
-					     struct pci_dev *from);
-#endif /* CONFIG_PCI_LEGACY */
-
 enum pci_lost_interrupt_reason {
 	PCI_LOST_IRQ_NO_INFORMATION = 0,
 	PCI_LOST_IRQ_DISABLE_MSI,
@@ -750,11 +794,19 @@
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
 bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
 void pci_pme_active(struct pci_dev *dev, bool enable);
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable);
+int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+		      bool runtime, bool enable);
 int pci_wake_from_d3(struct pci_dev *dev, bool enable);
 pci_power_t pci_target_state(struct pci_dev *dev);
 int pci_prepare_to_sleep(struct pci_dev *dev);
 int pci_back_from_sleep(struct pci_dev *dev);
+bool pci_dev_run_wake(struct pci_dev *dev);
+
+static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+				  bool enable)
+{
+	return __pci_enable_wake(dev, state, false, enable);
+}
 
 /* For use by arch with custom probe code */
 void set_pcie_port_type(struct pci_dev *pdev);
@@ -776,6 +828,7 @@
 void pci_bus_size_bridges(struct pci_bus *bus);
 int pci_claim_resource(struct pci_dev *, int);
 void pci_assign_unassigned_resources(void);
+void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
 void pdev_enable_device(struct pci_dev *);
 void pdev_sort_resources(struct pci_dev *, struct resource_list *);
 int pci_enable_resources(struct pci_dev *, int mask);
@@ -793,12 +846,23 @@
 void pci_release_selected_regions(struct pci_dev *, int);
 
 /* drivers/pci/bus.c */
+void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags);
+struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n);
+void pci_bus_remove_resources(struct pci_bus *bus);
+
+#define pci_bus_for_each_resource(bus, res, i)				\
+	for (i = 0;							\
+	    (res = pci_bus_resource_n(bus, i)) || i < PCI_BRIDGE_RESOURCE_NUM; \
+	     i++)
+
 int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
 			struct resource *res, resource_size_t size,
 			resource_size_t align, resource_size_t min,
 			unsigned int type_mask,
-			void (*alignf)(void *, struct resource *,
-				resource_size_t, resource_size_t),
+			resource_size_t (*alignf)(void *,
+						  const struct resource *,
+						  resource_size_t,
+						  resource_size_t),
 			void *alignf_data);
 void pci_enable_bridges(struct pci_bus *bus);
 
@@ -977,13 +1041,6 @@
 _PCI_NOP_ALL(read, *)
 _PCI_NOP_ALL(write,)
 
-static inline struct pci_dev *pci_find_device(unsigned int vendor,
-					      unsigned int device,
-					      struct pci_dev *from)
-{
-	return NULL;
-}
-
 static inline struct pci_dev *pci_get_device(unsigned int vendor,
 					     unsigned int device,
 					     struct pci_dev *from)
@@ -1241,8 +1298,12 @@
 	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend,			\
 			suspend##vendor##device##hook, vendor, device, hook)
 
-
+#ifdef CONFIG_PCI_QUIRKS
 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
+#else
+static inline void pci_fixup_device(enum pci_fixup_pass pass,
+				    struct pci_dev *dev) {}
+#endif
 
 void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen);
 void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 652ba797..5d09cba 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -28,26 +28,6 @@
 #ifndef _PCI_HOTPLUG_H
 #define _PCI_HOTPLUG_H
 
-
-/* These values come from the PCI Hotplug Spec */
-enum pci_bus_speed {
-	PCI_SPEED_33MHz			= 0x00,
-	PCI_SPEED_66MHz			= 0x01,
-	PCI_SPEED_66MHz_PCIX		= 0x02,
-	PCI_SPEED_100MHz_PCIX		= 0x03,
-	PCI_SPEED_133MHz_PCIX		= 0x04,
-	PCI_SPEED_66MHz_PCIX_ECC	= 0x05,
-	PCI_SPEED_100MHz_PCIX_ECC	= 0x06,
-	PCI_SPEED_133MHz_PCIX_ECC	= 0x07,
-	PCI_SPEED_66MHz_PCIX_266	= 0x09,
-	PCI_SPEED_100MHz_PCIX_266	= 0x0a,
-	PCI_SPEED_133MHz_PCIX_266	= 0x0b,
-	PCI_SPEED_66MHz_PCIX_533	= 0x11,
-	PCI_SPEED_100MHz_PCIX_533	= 0x12,
-	PCI_SPEED_133MHz_PCIX_533	= 0x13,
-	PCI_SPEED_UNKNOWN		= 0xff,
-};
-
 /* These values come from the PCI Express Spec */
 enum pcie_link_width {
 	PCIE_LNK_WIDTH_RESRV	= 0x00,
@@ -61,12 +41,6 @@
 	PCIE_LNK_WIDTH_UNKNOWN  = 0xFF,
 };
 
-enum pcie_link_speed {
-	PCIE_2_5GB		= 0x14,
-	PCIE_5_0GB		= 0x15,
-	PCIE_LNK_SPEED_UNKNOWN	= 0xFF,
-};
-
 /**
  * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
  * @owner: The module owner of this structure
@@ -89,12 +63,6 @@
  * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
  *	If this field is NULL, the value passed in the struct hotplug_slot_info
  *	will be used when this value is requested by a user.
- * @get_max_bus_speed: Called to get the max bus speed for a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
- * @get_cur_bus_speed: Called to get the current bus speed for a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
  *
  * The table of function pointers that is passed to the hotplug pci core by a
  * hotplug pci driver.  These functions are called by the hotplug pci core when
@@ -112,17 +80,14 @@
 	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
 	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
 	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
-	int (*get_max_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
-	int (*get_cur_bus_speed)	(struct hotplug_slot *slot, enum pci_bus_speed *value);
 };
 
 /**
  * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
- * @power: if power is enabled or not (1/0)
+ * @power_status: if power is enabled or not (1/0)
  * @attention_status: if the attention light is enabled or not (1/0)
  * @latch_status: if the latch (if any) is open or closed (1/0)
- * @adapter_present: if there is a pci board present in the slot or not (1/0)
- * @address: (domain << 16 | bus << 8 | dev)
+ * @adapter_status: if there is a pci board present in the slot or not (1/0)
  *
  * Used to notify the hotplug pci core of the status of a specific slot.
  */
@@ -131,8 +96,6 @@
 	u8	attention_status;
 	u8	latch_status;
 	u8	adapter_status;
-	enum pci_bus_speed	max_bus_speed;
-	enum pci_bus_speed	cur_bus_speed;
 };
 
 /**
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index cca8a04..0be8243 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2417,6 +2417,9 @@
 #define PCI_DEVICE_ID_INTEL_82840_HB	0x1a21
 #define PCI_DEVICE_ID_INTEL_82845_HB	0x1a30
 #define PCI_DEVICE_ID_INTEL_IOAT	0x1a38
+#define PCI_DEVICE_ID_INTEL_CPT_SMBUS	0x1c22
+#define PCI_DEVICE_ID_INTEL_CPT_LPC1	0x1c42
+#define PCI_DEVICE_ID_INTEL_CPT_LPC2	0x1c43
 #define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
 #define PCI_DEVICE_ID_INTEL_82801AA_1	0x2411
 #define PCI_DEVICE_ID_INTEL_82801AA_3	0x2413
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 8fa7187..a177698 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -211,11 +211,9 @@
 		__u32		wakeup_watermark; /* bytes before wakeup   */
 	};
 
-	__u32			__reserved_2;
-
-	__u64			bp_addr;
 	__u32			bp_type;
-	__u32			bp_len;
+	__u64			bp_addr;
+	__u64			bp_len;
 };
 
 /*
diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h
index 228b0b6..0b80c80 100644
--- a/include/linux/pfkeyv2.h
+++ b/include/linux/pfkeyv2.h
@@ -315,6 +315,7 @@
 #define SADB_X_EALG_AES_GCM_ICV12	19
 #define SADB_X_EALG_AES_GCM_ICV16	20
 #define SADB_X_EALG_CAMELLIACBC		22
+#define SADB_X_EALG_NULL_AES_GMAC	23
 #define SADB_EALG_MAX                   253 /* last EALG */
 /* private allocations should use 249-255 (RFC2407) */
 #define SADB_X_EALG_SERPENTCBC  252     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h
index 51b3e77..cc813f9 100644
--- a/include/linux/spi/dw_spi.h
+++ b/include/linux/spi/dw_spi.h
@@ -90,6 +90,7 @@
 	unsigned long		paddr;
 	u32			iolen;
 	int			irq;
+	u32			fifo_len;	/* depth of the FIFO buffer */
 	u32			max_freq;	/* max bus freq supported */
 
 	u16			bus_num;
@@ -171,6 +172,10 @@
 {
 	if (cs > dws->num_cs)
 		return;
+
+	if (dws->cs_control)
+		dws->cs_control(1);
+
 	dw_writel(dws, ser, 1 << cs);
 }
 
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 057a2e0..f508c65 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -51,6 +51,9 @@
  *	This re-enables callbacks; it returns "false" if there are pending
  *	buffers in the queue, to detect a possible race between the driver
  *	checking for more work, and enabling callbacks.
+ * @detach_unused_buf: detach first unused buffer
+ * 	vq: the struct virtqueue we're talking about.
+ * 	Returns NULL or the "data" token handed to add_buf
  *
  * Locking rules are straightforward: the driver is responsible for
  * locking.  No two operations may be invoked simultaneously, with the exception
@@ -71,6 +74,7 @@
 
 	void (*disable_cb)(struct virtqueue *vq);
 	bool (*enable_cb)(struct virtqueue *vq);
+	void *(*detach_unused_buf)(struct virtqueue *vq);
 };
 
 /**
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
index 1418f04..a50ecd1 100644
--- a/include/linux/virtio_balloon.h
+++ b/include/linux/virtio_balloon.h
@@ -7,6 +7,7 @@
 
 /* The feature bitmap for virtio balloon */
 #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
+#define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
 
 /* Size of a PFN in the balloon interface. */
 #define VIRTIO_BALLOON_PFN_SHIFT 12
@@ -18,4 +19,18 @@
 	/* Number of pages we've actually got in balloon. */
 	__le32 actual;
 };
+
+#define VIRTIO_BALLOON_S_SWAP_IN  0   /* Amount of memory swapped in */
+#define VIRTIO_BALLOON_S_SWAP_OUT 1   /* Amount of memory swapped out */
+#define VIRTIO_BALLOON_S_MAJFLT   2   /* Number of major faults */
+#define VIRTIO_BALLOON_S_MINFLT   3   /* Number of minor faults */
+#define VIRTIO_BALLOON_S_MEMFREE  4   /* Total amount of free memory */
+#define VIRTIO_BALLOON_S_MEMTOT   5   /* Total amount of memory */
+#define VIRTIO_BALLOON_S_NR       6
+
+struct virtio_balloon_stat {
+	u16 tag;
+	u64 val;
+} __attribute__((packed));
+
 #endif /* _LINUX_VIRTIO_BALLOON_H */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index fd294c5..e52029e 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -15,6 +15,7 @@
 #define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
 #define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
 #define VIRTIO_BLK_F_FLUSH	9	/* Cache flush command support */
+#define VIRTIO_BLK_F_TOPOLOGY	10	/* Topology information is available */
 
 struct virtio_blk_config {
 	/* The capacity (in 512-byte sectors). */
@@ -29,8 +30,20 @@
 		__u8 heads;
 		__u8 sectors;
 	} geometry;
+
 	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
 	__u32 blk_size;
+
+	/* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY  */
+	/* exponent for physical block per logical block. */
+	__u8 physical_block_exp;
+	/* alignment offset in logical blocks. */
+	__u8 alignment_offset;
+	/* minimum I/O size without performance penalty in logical blocks. */
+	__u16 min_io_size;
+	/* optimal sustained I/O size in logical blocks. */
+	__u32 opt_io_size;
+
 } __attribute__((packed));
 
 /*
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index fe88517..ae4f039 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -3,19 +3,45 @@
 #include <linux/types.h>
 #include <linux/virtio_ids.h>
 #include <linux/virtio_config.h>
-/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers. */
+/*
+ * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Copyright (C) Red Hat, Inc., 2009, 2010
+ */
 
 /* Feature bits */
 #define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
 
 struct virtio_console_config {
 	/* colums of the screens */
 	__u16 cols;
 	/* rows of the screens */
 	__u16 rows;
+	/* max. number of ports this device can hold */
+	__u32 max_nr_ports;
+	/* number of ports added so far */
+	__u32 nr_ports;
 } __attribute__((packed));
 
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+	__u32 id;		/* Port number */
+	__u16 event;		/* The kind of control event (see below) */
+	__u16 value;		/* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_PORT_READY	0
+#define VIRTIO_CONSOLE_CONSOLE_PORT	1
+#define VIRTIO_CONSOLE_RESIZE		2
+#define VIRTIO_CONSOLE_PORT_OPEN	3
+#define VIRTIO_CONSOLE_PORT_NAME	4
+#define VIRTIO_CONSOLE_PORT_REMOVE	5
 
 #ifdef __KERNEL__
 int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
diff --git a/init/Kconfig b/init/Kconfig
index d95ca7c..1510e17 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1262,4 +1262,8 @@
 config PREEMPT_NOTIFIERS
 	bool
 
+config PADATA
+	depends on SMP
+	bool
+
 source "kernel/Kconfig.locks"
diff --git a/kernel/Makefile b/kernel/Makefile
index 864ff75..6aebdeb 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -100,6 +100,7 @@
 obj-$(CONFIG_PERF_EVENTS) += perf_event.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
 obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
+obj-$(CONFIG_PADATA) += padata.o
 
 ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
 # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
index 8a5c7d5..967e6614 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/hw_breakpoint.c
@@ -360,8 +360,8 @@
 int modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr)
 {
 	u64 old_addr = bp->attr.bp_addr;
+	u64 old_len = bp->attr.bp_len;
 	int old_type = bp->attr.bp_type;
-	int old_len = bp->attr.bp_len;
 	int err = 0;
 
 	perf_event_disable(bp);
diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index 498cabb..35edbe22 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -80,7 +80,7 @@
 
 	buffer = kmalloc(size, gfp_mask);
 	if (!buffer) {
-		_kfifo_init(fifo, 0, 0);
+		_kfifo_init(fifo, NULL, 0);
 		return -ENOMEM;
 	}
 
@@ -97,6 +97,7 @@
 void kfifo_free(struct kfifo *fifo)
 {
 	kfree(fifo->buffer);
+	_kfifo_init(fifo, NULL, 0);
 }
 EXPORT_SYMBOL(kfifo_free);
 
diff --git a/kernel/padata.c b/kernel/padata.c
new file mode 100644
index 0000000..6f9bcb8
--- /dev/null
+++ b/kernel/padata.c
@@ -0,0 +1,690 @@
+/*
+ * padata.c - generic interface to process data streams in parallel
+ *
+ * Copyright (C) 2008, 2009 secunet Security Networks AG
+ * Copyright (C) 2008, 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/cpu.h>
+#include <linux/padata.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/rcupdate.h>
+
+#define MAX_SEQ_NR INT_MAX - NR_CPUS
+#define MAX_OBJ_NUM 10000 * NR_CPUS
+
+static int padata_index_to_cpu(struct parallel_data *pd, int cpu_index)
+{
+	int cpu, target_cpu;
+
+	target_cpu = cpumask_first(pd->cpumask);
+	for (cpu = 0; cpu < cpu_index; cpu++)
+		target_cpu = cpumask_next(target_cpu, pd->cpumask);
+
+	return target_cpu;
+}
+
+static int padata_cpu_hash(struct padata_priv *padata)
+{
+	int cpu_index;
+	struct parallel_data *pd;
+
+	pd =  padata->pd;
+
+	/*
+	 * Hash the sequence numbers to the cpus by taking
+	 * seq_nr mod. number of cpus in use.
+	 */
+	cpu_index =  padata->seq_nr % cpumask_weight(pd->cpumask);
+
+	return padata_index_to_cpu(pd, cpu_index);
+}
+
+static void padata_parallel_worker(struct work_struct *work)
+{
+	struct padata_queue *queue;
+	struct parallel_data *pd;
+	struct padata_instance *pinst;
+	LIST_HEAD(local_list);
+
+	local_bh_disable();
+	queue = container_of(work, struct padata_queue, pwork);
+	pd = queue->pd;
+	pinst = pd->pinst;
+
+	spin_lock(&queue->parallel.lock);
+	list_replace_init(&queue->parallel.list, &local_list);
+	spin_unlock(&queue->parallel.lock);
+
+	while (!list_empty(&local_list)) {
+		struct padata_priv *padata;
+
+		padata = list_entry(local_list.next,
+				    struct padata_priv, list);
+
+		list_del_init(&padata->list);
+
+		padata->parallel(padata);
+	}
+
+	local_bh_enable();
+}
+
+/*
+ * padata_do_parallel - padata parallelization function
+ *
+ * @pinst: padata instance
+ * @padata: object to be parallelized
+ * @cb_cpu: cpu the serialization callback function will run on,
+ *          must be in the cpumask of padata.
+ *
+ * The parallelization callback function will run with BHs off.
+ * Note: Every object which is parallelized by padata_do_parallel
+ * must be seen by padata_do_serial.
+ */
+int padata_do_parallel(struct padata_instance *pinst,
+		       struct padata_priv *padata, int cb_cpu)
+{
+	int target_cpu, err;
+	struct padata_queue *queue;
+	struct parallel_data *pd;
+
+	rcu_read_lock_bh();
+
+	pd = rcu_dereference(pinst->pd);
+
+	err = 0;
+	if (!(pinst->flags & PADATA_INIT))
+		goto out;
+
+	err =  -EBUSY;
+	if ((pinst->flags & PADATA_RESET))
+		goto out;
+
+	if (atomic_read(&pd->refcnt) >= MAX_OBJ_NUM)
+		goto out;
+
+	err = -EINVAL;
+	if (!cpumask_test_cpu(cb_cpu, pd->cpumask))
+		goto out;
+
+	err = -EINPROGRESS;
+	atomic_inc(&pd->refcnt);
+	padata->pd = pd;
+	padata->cb_cpu = cb_cpu;
+
+	if (unlikely(atomic_read(&pd->seq_nr) == pd->max_seq_nr))
+		atomic_set(&pd->seq_nr, -1);
+
+	padata->seq_nr = atomic_inc_return(&pd->seq_nr);
+
+	target_cpu = padata_cpu_hash(padata);
+	queue = per_cpu_ptr(pd->queue, target_cpu);
+
+	spin_lock(&queue->parallel.lock);
+	list_add_tail(&padata->list, &queue->parallel.list);
+	spin_unlock(&queue->parallel.lock);
+
+	queue_work_on(target_cpu, pinst->wq, &queue->pwork);
+
+out:
+	rcu_read_unlock_bh();
+
+	return err;
+}
+EXPORT_SYMBOL(padata_do_parallel);
+
+static struct padata_priv *padata_get_next(struct parallel_data *pd)
+{
+	int cpu, num_cpus, empty, calc_seq_nr;
+	int seq_nr, next_nr, overrun, next_overrun;
+	struct padata_queue *queue, *next_queue;
+	struct padata_priv *padata;
+	struct padata_list *reorder;
+
+	empty = 0;
+	next_nr = -1;
+	next_overrun = 0;
+	next_queue = NULL;
+
+	num_cpus = cpumask_weight(pd->cpumask);
+
+	for_each_cpu(cpu, pd->cpumask) {
+		queue = per_cpu_ptr(pd->queue, cpu);
+		reorder = &queue->reorder;
+
+		/*
+		 * Calculate the seq_nr of the object that should be
+		 * next in this queue.
+		 */
+		overrun = 0;
+		calc_seq_nr = (atomic_read(&queue->num_obj) * num_cpus)
+			       + queue->cpu_index;
+
+		if (unlikely(calc_seq_nr > pd->max_seq_nr)) {
+			calc_seq_nr = calc_seq_nr - pd->max_seq_nr - 1;
+			overrun = 1;
+		}
+
+		if (!list_empty(&reorder->list)) {
+			padata = list_entry(reorder->list.next,
+					    struct padata_priv, list);
+
+			seq_nr  = padata->seq_nr;
+			BUG_ON(calc_seq_nr != seq_nr);
+		} else {
+			seq_nr = calc_seq_nr;
+			empty++;
+		}
+
+		if (next_nr < 0 || seq_nr < next_nr
+		    || (next_overrun && !overrun)) {
+			next_nr = seq_nr;
+			next_overrun = overrun;
+			next_queue = queue;
+		}
+	}
+
+	padata = NULL;
+
+	if (empty == num_cpus)
+		goto out;
+
+	reorder = &next_queue->reorder;
+
+	if (!list_empty(&reorder->list)) {
+		padata = list_entry(reorder->list.next,
+				    struct padata_priv, list);
+
+		if (unlikely(next_overrun)) {
+			for_each_cpu(cpu, pd->cpumask) {
+				queue = per_cpu_ptr(pd->queue, cpu);
+				atomic_set(&queue->num_obj, 0);
+			}
+		}
+
+		spin_lock(&reorder->lock);
+		list_del_init(&padata->list);
+		atomic_dec(&pd->reorder_objects);
+		spin_unlock(&reorder->lock);
+
+		atomic_inc(&next_queue->num_obj);
+
+		goto out;
+	}
+
+	if (next_nr % num_cpus == next_queue->cpu_index) {
+		padata = ERR_PTR(-ENODATA);
+		goto out;
+	}
+
+	padata = ERR_PTR(-EINPROGRESS);
+out:
+	return padata;
+}
+
+static void padata_reorder(struct parallel_data *pd)
+{
+	struct padata_priv *padata;
+	struct padata_queue *queue;
+	struct padata_instance *pinst = pd->pinst;
+
+try_again:
+	if (!spin_trylock_bh(&pd->lock))
+		goto out;
+
+	while (1) {
+		padata = padata_get_next(pd);
+
+		if (!padata || PTR_ERR(padata) == -EINPROGRESS)
+			break;
+
+		if (PTR_ERR(padata) == -ENODATA) {
+			spin_unlock_bh(&pd->lock);
+			goto out;
+		}
+
+		queue = per_cpu_ptr(pd->queue, padata->cb_cpu);
+
+		spin_lock(&queue->serial.lock);
+		list_add_tail(&padata->list, &queue->serial.list);
+		spin_unlock(&queue->serial.lock);
+
+		queue_work_on(padata->cb_cpu, pinst->wq, &queue->swork);
+	}
+
+	spin_unlock_bh(&pd->lock);
+
+	if (atomic_read(&pd->reorder_objects))
+		goto try_again;
+
+out:
+	return;
+}
+
+static void padata_serial_worker(struct work_struct *work)
+{
+	struct padata_queue *queue;
+	struct parallel_data *pd;
+	LIST_HEAD(local_list);
+
+	local_bh_disable();
+	queue = container_of(work, struct padata_queue, swork);
+	pd = queue->pd;
+
+	spin_lock(&queue->serial.lock);
+	list_replace_init(&queue->serial.list, &local_list);
+	spin_unlock(&queue->serial.lock);
+
+	while (!list_empty(&local_list)) {
+		struct padata_priv *padata;
+
+		padata = list_entry(local_list.next,
+				    struct padata_priv, list);
+
+		list_del_init(&padata->list);
+
+		padata->serial(padata);
+		atomic_dec(&pd->refcnt);
+	}
+	local_bh_enable();
+}
+
+/*
+ * padata_do_serial - padata serialization function
+ *
+ * @padata: object to be serialized.
+ *
+ * padata_do_serial must be called for every parallelized object.
+ * The serialization callback function will run with BHs off.
+ */
+void padata_do_serial(struct padata_priv *padata)
+{
+	int cpu;
+	struct padata_queue *queue;
+	struct parallel_data *pd;
+
+	pd = padata->pd;
+
+	cpu = get_cpu();
+	queue = per_cpu_ptr(pd->queue, cpu);
+
+	spin_lock(&queue->reorder.lock);
+	atomic_inc(&pd->reorder_objects);
+	list_add_tail(&padata->list, &queue->reorder.list);
+	spin_unlock(&queue->reorder.lock);
+
+	put_cpu();
+
+	padata_reorder(pd);
+}
+EXPORT_SYMBOL(padata_do_serial);
+
+static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst,
+					     const struct cpumask *cpumask)
+{
+	int cpu, cpu_index, num_cpus;
+	struct padata_queue *queue;
+	struct parallel_data *pd;
+
+	cpu_index = 0;
+
+	pd = kzalloc(sizeof(struct parallel_data), GFP_KERNEL);
+	if (!pd)
+		goto err;
+
+	pd->queue = alloc_percpu(struct padata_queue);
+	if (!pd->queue)
+		goto err_free_pd;
+
+	if (!alloc_cpumask_var(&pd->cpumask, GFP_KERNEL))
+		goto err_free_queue;
+
+	for_each_possible_cpu(cpu) {
+		queue = per_cpu_ptr(pd->queue, cpu);
+
+		queue->pd = pd;
+
+		if (cpumask_test_cpu(cpu, cpumask)
+		    && cpumask_test_cpu(cpu, cpu_active_mask)) {
+			queue->cpu_index = cpu_index;
+			cpu_index++;
+		} else
+			queue->cpu_index = -1;
+
+		INIT_LIST_HEAD(&queue->reorder.list);
+		INIT_LIST_HEAD(&queue->parallel.list);
+		INIT_LIST_HEAD(&queue->serial.list);
+		spin_lock_init(&queue->reorder.lock);
+		spin_lock_init(&queue->parallel.lock);
+		spin_lock_init(&queue->serial.lock);
+
+		INIT_WORK(&queue->pwork, padata_parallel_worker);
+		INIT_WORK(&queue->swork, padata_serial_worker);
+		atomic_set(&queue->num_obj, 0);
+	}
+
+	cpumask_and(pd->cpumask, cpumask, cpu_active_mask);
+
+	num_cpus = cpumask_weight(pd->cpumask);
+	pd->max_seq_nr = (MAX_SEQ_NR / num_cpus) * num_cpus - 1;
+
+	atomic_set(&pd->seq_nr, -1);
+	atomic_set(&pd->reorder_objects, 0);
+	atomic_set(&pd->refcnt, 0);
+	pd->pinst = pinst;
+	spin_lock_init(&pd->lock);
+
+	return pd;
+
+err_free_queue:
+	free_percpu(pd->queue);
+err_free_pd:
+	kfree(pd);
+err:
+	return NULL;
+}
+
+static void padata_free_pd(struct parallel_data *pd)
+{
+	free_cpumask_var(pd->cpumask);
+	free_percpu(pd->queue);
+	kfree(pd);
+}
+
+static void padata_replace(struct padata_instance *pinst,
+			   struct parallel_data *pd_new)
+{
+	struct parallel_data *pd_old = pinst->pd;
+
+	pinst->flags |= PADATA_RESET;
+
+	rcu_assign_pointer(pinst->pd, pd_new);
+
+	synchronize_rcu();
+
+	while (atomic_read(&pd_old->refcnt) != 0)
+		yield();
+
+	flush_workqueue(pinst->wq);
+
+	padata_free_pd(pd_old);
+
+	pinst->flags &= ~PADATA_RESET;
+}
+
+/*
+ * padata_set_cpumask - set the cpumask that padata should use
+ *
+ * @pinst: padata instance
+ * @cpumask: the cpumask to use
+ */
+int padata_set_cpumask(struct padata_instance *pinst,
+			cpumask_var_t cpumask)
+{
+	struct parallel_data *pd;
+	int err = 0;
+
+	might_sleep();
+
+	mutex_lock(&pinst->lock);
+
+	pd = padata_alloc_pd(pinst, cpumask);
+	if (!pd) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	cpumask_copy(pinst->cpumask, cpumask);
+
+	padata_replace(pinst, pd);
+
+out:
+	mutex_unlock(&pinst->lock);
+
+	return err;
+}
+EXPORT_SYMBOL(padata_set_cpumask);
+
+static int __padata_add_cpu(struct padata_instance *pinst, int cpu)
+{
+	struct parallel_data *pd;
+
+	if (cpumask_test_cpu(cpu, cpu_active_mask)) {
+		pd = padata_alloc_pd(pinst, pinst->cpumask);
+		if (!pd)
+			return -ENOMEM;
+
+		padata_replace(pinst, pd);
+	}
+
+	return 0;
+}
+
+/*
+ * padata_add_cpu - add a cpu to the padata cpumask
+ *
+ * @pinst: padata instance
+ * @cpu: cpu to add
+ */
+int padata_add_cpu(struct padata_instance *pinst, int cpu)
+{
+	int err;
+
+	might_sleep();
+
+	mutex_lock(&pinst->lock);
+
+	cpumask_set_cpu(cpu, pinst->cpumask);
+	err = __padata_add_cpu(pinst, cpu);
+
+	mutex_unlock(&pinst->lock);
+
+	return err;
+}
+EXPORT_SYMBOL(padata_add_cpu);
+
+static int __padata_remove_cpu(struct padata_instance *pinst, int cpu)
+{
+	struct parallel_data *pd;
+
+	if (cpumask_test_cpu(cpu, cpu_online_mask)) {
+		pd = padata_alloc_pd(pinst, pinst->cpumask);
+		if (!pd)
+			return -ENOMEM;
+
+		padata_replace(pinst, pd);
+	}
+
+	return 0;
+}
+
+/*
+ * padata_remove_cpu - remove a cpu from the padata cpumask
+ *
+ * @pinst: padata instance
+ * @cpu: cpu to remove
+ */
+int padata_remove_cpu(struct padata_instance *pinst, int cpu)
+{
+	int err;
+
+	might_sleep();
+
+	mutex_lock(&pinst->lock);
+
+	cpumask_clear_cpu(cpu, pinst->cpumask);
+	err = __padata_remove_cpu(pinst, cpu);
+
+	mutex_unlock(&pinst->lock);
+
+	return err;
+}
+EXPORT_SYMBOL(padata_remove_cpu);
+
+/*
+ * padata_start - start the parallel processing
+ *
+ * @pinst: padata instance to start
+ */
+void padata_start(struct padata_instance *pinst)
+{
+	might_sleep();
+
+	mutex_lock(&pinst->lock);
+	pinst->flags |= PADATA_INIT;
+	mutex_unlock(&pinst->lock);
+}
+EXPORT_SYMBOL(padata_start);
+
+/*
+ * padata_stop - stop the parallel processing
+ *
+ * @pinst: padata instance to stop
+ */
+void padata_stop(struct padata_instance *pinst)
+{
+	might_sleep();
+
+	mutex_lock(&pinst->lock);
+	pinst->flags &= ~PADATA_INIT;
+	mutex_unlock(&pinst->lock);
+}
+EXPORT_SYMBOL(padata_stop);
+
+static int __cpuinit padata_cpu_callback(struct notifier_block *nfb,
+					 unsigned long action, void *hcpu)
+{
+	int err;
+	struct padata_instance *pinst;
+	int cpu = (unsigned long)hcpu;
+
+	pinst = container_of(nfb, struct padata_instance, cpu_notifier);
+
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		if (!cpumask_test_cpu(cpu, pinst->cpumask))
+			break;
+		mutex_lock(&pinst->lock);
+		err = __padata_add_cpu(pinst, cpu);
+		mutex_unlock(&pinst->lock);
+		if (err)
+			return NOTIFY_BAD;
+		break;
+
+	case CPU_DOWN_PREPARE:
+	case CPU_DOWN_PREPARE_FROZEN:
+		if (!cpumask_test_cpu(cpu, pinst->cpumask))
+			break;
+		mutex_lock(&pinst->lock);
+		err = __padata_remove_cpu(pinst, cpu);
+		mutex_unlock(&pinst->lock);
+		if (err)
+			return NOTIFY_BAD;
+		break;
+
+	case CPU_UP_CANCELED:
+	case CPU_UP_CANCELED_FROZEN:
+		if (!cpumask_test_cpu(cpu, pinst->cpumask))
+			break;
+		mutex_lock(&pinst->lock);
+		__padata_remove_cpu(pinst, cpu);
+		mutex_unlock(&pinst->lock);
+
+	case CPU_DOWN_FAILED:
+	case CPU_DOWN_FAILED_FROZEN:
+		if (!cpumask_test_cpu(cpu, pinst->cpumask))
+			break;
+		mutex_lock(&pinst->lock);
+		__padata_add_cpu(pinst, cpu);
+		mutex_unlock(&pinst->lock);
+	}
+
+	return NOTIFY_OK;
+}
+
+/*
+ * padata_alloc - allocate and initialize a padata instance
+ *
+ * @cpumask: cpumask that padata uses for parallelization
+ * @wq: workqueue to use for the allocated padata instance
+ */
+struct padata_instance *padata_alloc(const struct cpumask *cpumask,
+				     struct workqueue_struct *wq)
+{
+	int err;
+	struct padata_instance *pinst;
+	struct parallel_data *pd;
+
+	pinst = kzalloc(sizeof(struct padata_instance), GFP_KERNEL);
+	if (!pinst)
+		goto err;
+
+	pd = padata_alloc_pd(pinst, cpumask);
+	if (!pd)
+		goto err_free_inst;
+
+	rcu_assign_pointer(pinst->pd, pd);
+
+	pinst->wq = wq;
+
+	cpumask_copy(pinst->cpumask, cpumask);
+
+	pinst->flags = 0;
+
+	pinst->cpu_notifier.notifier_call = padata_cpu_callback;
+	pinst->cpu_notifier.priority = 0;
+	err = register_hotcpu_notifier(&pinst->cpu_notifier);
+	if (err)
+		goto err_free_pd;
+
+	mutex_init(&pinst->lock);
+
+	return pinst;
+
+err_free_pd:
+	padata_free_pd(pd);
+err_free_inst:
+	kfree(pinst);
+err:
+	return NULL;
+}
+EXPORT_SYMBOL(padata_alloc);
+
+/*
+ * padata_free - free a padata instance
+ *
+ * @ padata_inst: padata instance to free
+ */
+void padata_free(struct padata_instance *pinst)
+{
+	padata_stop(pinst);
+
+	synchronize_rcu();
+
+	while (atomic_read(&pinst->pd->refcnt) != 0)
+		yield();
+
+	unregister_hotcpu_notifier(&pinst->cpu_notifier);
+	padata_free_pd(pinst->pd);
+	kfree(pinst);
+}
+EXPORT_SYMBOL(padata_free);
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index d27746b..2ae7409 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -3259,8 +3259,6 @@
 	task_event->event_id.tid = perf_event_tid(event, task);
 	task_event->event_id.ptid = perf_event_tid(event, current);
 
-	task_event->event_id.time = perf_clock();
-
 	perf_output_put(&handle, task_event->event_id);
 
 	perf_output_end(&handle);
@@ -3268,7 +3266,7 @@
 
 static int perf_event_task_match(struct perf_event *event)
 {
-	if (event->state != PERF_EVENT_STATE_ACTIVE)
+	if (event->state < PERF_EVENT_STATE_INACTIVE)
 		return 0;
 
 	if (event->cpu != -1 && event->cpu != smp_processor_id())
@@ -3300,7 +3298,7 @@
 	cpuctx = &get_cpu_var(perf_cpu_context);
 	perf_event_task_ctx(&cpuctx->ctx, task_event);
 	if (!ctx)
-		ctx = rcu_dereference(task_event->task->perf_event_ctxp);
+		ctx = rcu_dereference(current->perf_event_ctxp);
 	if (ctx)
 		perf_event_task_ctx(ctx, task_event);
 	put_cpu_var(perf_cpu_context);
@@ -3331,6 +3329,7 @@
 			/* .ppid */
 			/* .tid  */
 			/* .ptid */
+			.time = perf_clock(),
 		},
 	};
 
@@ -3380,7 +3379,7 @@
 
 static int perf_event_comm_match(struct perf_event *event)
 {
-	if (event->state != PERF_EVENT_STATE_ACTIVE)
+	if (event->state < PERF_EVENT_STATE_INACTIVE)
 		return 0;
 
 	if (event->cpu != -1 && event->cpu != smp_processor_id())
@@ -3500,7 +3499,7 @@
 static int perf_event_mmap_match(struct perf_event *event,
 				   struct perf_mmap_event *mmap_event)
 {
-	if (event->state != PERF_EVENT_STATE_ACTIVE)
+	if (event->state < PERF_EVENT_STATE_INACTIVE)
 		return 0;
 
 	if (event->cpu != -1 && event->cpu != smp_processor_id())
@@ -4580,7 +4579,7 @@
 	if (attr->type >= PERF_TYPE_MAX)
 		return -EINVAL;
 
-	if (attr->__reserved_1 || attr->__reserved_2)
+	if (attr->__reserved_1)
 		return -EINVAL;
 
 	if (attr->sample_type & ~(PERF_SAMPLE_MAX-1))
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 91e09d3..4c9cffc 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -222,3 +222,8 @@
 	  and the bus type drivers of the buses the devices are on are
 	  responsible for the actual handling of the autosuspend requests and
 	  wake-up events.
+
+config PM_OPS
+	bool
+	depends on PM_SLEEP || PM_RUNTIME
+	default y
diff --git a/kernel/resource.c b/kernel/resource.c
index af96c1e..24e9e60 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -188,6 +188,36 @@
 	return -EINVAL;
 }
 
+static void __release_child_resources(struct resource *r)
+{
+	struct resource *tmp, *p;
+	resource_size_t size;
+
+	p = r->child;
+	r->child = NULL;
+	while (p) {
+		tmp = p;
+		p = p->sibling;
+
+		tmp->parent = NULL;
+		tmp->sibling = NULL;
+		__release_child_resources(tmp);
+
+		printk(KERN_DEBUG "release child resource %pR\n", tmp);
+		/* need to restore size, and keep flags */
+		size = resource_size(tmp);
+		tmp->start = 0;
+		tmp->end = size - 1;
+	}
+}
+
+void release_child_resources(struct resource *r)
+{
+	write_lock(&resource_lock);
+	__release_child_resources(r);
+	write_unlock(&resource_lock);
+}
+
 /**
  * request_resource - request and reserve an I/O or memory resource
  * @root: root resource descriptor
@@ -303,8 +333,10 @@
 static int find_resource(struct resource *root, struct resource *new,
 			 resource_size_t size, resource_size_t min,
 			 resource_size_t max, resource_size_t align,
-			 void (*alignf)(void *, struct resource *,
-					resource_size_t, resource_size_t),
+			 resource_size_t (*alignf)(void *,
+						   const struct resource *,
+						   resource_size_t,
+						   resource_size_t),
 			 void *alignf_data)
 {
 	struct resource *this = root->child;
@@ -330,7 +362,7 @@
 			tmp.end = max;
 		tmp.start = ALIGN(tmp.start, align);
 		if (alignf)
-			alignf(alignf_data, &tmp, size, align);
+			tmp.start = alignf(alignf_data, &tmp, size, align);
 		if (tmp.start < tmp.end && tmp.end - tmp.start >= size - 1) {
 			new->start = tmp.start;
 			new->end = tmp.start + size - 1;
@@ -358,8 +390,10 @@
 int allocate_resource(struct resource *root, struct resource *new,
 		      resource_size_t size, resource_size_t min,
 		      resource_size_t max, resource_size_t align,
-		      void (*alignf)(void *, struct resource *,
-				     resource_size_t, resource_size_t),
+		      resource_size_t (*alignf)(void *,
+						const struct resource *,
+						resource_size_t,
+						resource_size_t),
 		      void *alignf_data)
 {
 	int err;
diff --git a/kernel/softirq.c b/kernel/softirq.c
index a09502e..7c1a67e 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -500,22 +500,17 @@
  */
 
 /*
- * The trampoline is called when the hrtimer expires. If this is
- * called from the hrtimer interrupt then we schedule the tasklet as
- * the timer callback function expects to run in softirq context. If
- * it's called in softirq context anyway (i.e. high resolution timers
- * disabled) then the hrtimer callback is called right away.
+ * The trampoline is called when the hrtimer expires. It schedules a tasklet
+ * to run __tasklet_hrtimer_trampoline() which in turn will call the intended
+ * hrtimer callback, but from softirq context.
  */
 static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer)
 {
 	struct tasklet_hrtimer *ttimer =
 		container_of(timer, struct tasklet_hrtimer, timer);
 
-	if (hrtimer_is_hres_active(timer)) {
-		tasklet_hi_schedule(&ttimer->tasklet);
-		return HRTIMER_NORESTART;
-	}
-	return ttimer->function(timer);
+	tasklet_hi_schedule(&ttimer->tasklet);
+	return HRTIMER_NORESTART;
 }
 
 /*
diff --git a/kernel/sys.c b/kernel/sys.c
index 26a6b73..18bde97 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -222,6 +222,7 @@
 	if (which > PRIO_USER || which < PRIO_PROCESS)
 		return -EINVAL;
 
+	rcu_read_lock();
 	read_lock(&tasklist_lock);
 	switch (which) {
 		case PRIO_PROCESS:
@@ -267,6 +268,7 @@
 	}
 out_unlock:
 	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 
 	return retval;
 }
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 6ea90c0..50b1b82 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -689,7 +689,7 @@
 			return -EINVAL;
 		}
 		/* an address specified */
-		ret = strict_strtoul(&argv[0][2], 0, (unsigned long *)&addr);
+		ret = strict_strtoul(&argv[1][0], 0, (unsigned long *)&addr);
 		if (ret) {
 			pr_info("Failed to parse address.\n");
 			return ret;
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index 678a512..f4bc9b2 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -157,6 +157,7 @@
 	unsigned long val, flags;
 	char buf[64];
 	int ret;
+	int cpu;
 
 	if (count >= sizeof(buf))
 		return -EINVAL;
@@ -171,9 +172,20 @@
 		return ret;
 
 	local_irq_save(flags);
+
+	/*
+	 * In case we trace inside arch_spin_lock() or after (NMI),
+	 * we will cause circular lock, so we also need to increase
+	 * the percpu trace_active here.
+	 */
+	cpu = smp_processor_id();
+	per_cpu(trace_active, cpu)++;
+
 	arch_spin_lock(&max_stack_lock);
 	*ptr = val;
 	arch_spin_unlock(&max_stack_lock);
+
+	per_cpu(trace_active, cpu)--;
 	local_irq_restore(flags);
 
 	return count;
@@ -206,7 +218,13 @@
 
 static void *t_start(struct seq_file *m, loff_t *pos)
 {
+	int cpu;
+
 	local_irq_disable();
+
+	cpu = smp_processor_id();
+	per_cpu(trace_active, cpu)++;
+
 	arch_spin_lock(&max_stack_lock);
 
 	if (*pos == 0)
@@ -217,7 +235,13 @@
 
 static void t_stop(struct seq_file *m, void *p)
 {
+	int cpu;
+
 	arch_spin_unlock(&max_stack_lock);
+
+	cpu = smp_processor_id();
+	per_cpu(trace_active, cpu)--;
+
 	local_irq_enable();
 }
 
diff --git a/lib/idr.c b/lib/idr.c
index 1cac726..0dc7822 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -156,10 +156,12 @@
 			id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1;
 
 			/* if already at the top layer, we need to grow */
-			if (!(p = pa[l])) {
+			if (id >= 1 << (idp->layers * IDR_BITS)) {
 				*starting_id = id;
 				return IDR_NEED_TO_GROW;
 			}
+			p = pa[l];
+			BUG_ON(!p);
 
 			/* If we need to go up one layer, continue the
 			 * loop; otherwise, restart from the top.
diff --git a/mm/migrate.c b/mm/migrate.c
index 9a0db5b..880bd59 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1002,33 +1002,27 @@
 #define DO_PAGES_STAT_CHUNK_NR 16
 	const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR];
 	int chunk_status[DO_PAGES_STAT_CHUNK_NR];
-	unsigned long i, chunk_nr = DO_PAGES_STAT_CHUNK_NR;
-	int err;
 
-	for (i = 0; i < nr_pages; i += chunk_nr) {
-		if (chunk_nr > nr_pages - i)
-			chunk_nr = nr_pages - i;
+	while (nr_pages) {
+		unsigned long chunk_nr;
 
-		err = copy_from_user(chunk_pages, &pages[i],
-				     chunk_nr * sizeof(*chunk_pages));
-		if (err) {
-			err = -EFAULT;
-			goto out;
-		}
+		chunk_nr = nr_pages;
+		if (chunk_nr > DO_PAGES_STAT_CHUNK_NR)
+			chunk_nr = DO_PAGES_STAT_CHUNK_NR;
+
+		if (copy_from_user(chunk_pages, pages, chunk_nr * sizeof(*chunk_pages)))
+			break;
 
 		do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
 
-		err = copy_to_user(&status[i], chunk_status,
-				   chunk_nr * sizeof(*chunk_status));
-		if (err) {
-			err = -EFAULT;
-			goto out;
-		}
-	}
-	err = 0;
+		if (copy_to_user(status, chunk_status, chunk_nr * sizeof(*status)))
+			break;
 
-out:
-	return err;
+		pages += chunk_nr;
+		status += chunk_nr;
+		nr_pages -= chunk_nr;
+	}
+	return nr_pages ? -EFAULT : 0;
 }
 
 /*
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index f52481b..2370504 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -459,6 +459,8 @@
 	list_for_each_entry(c, &p->children, sibling) {
 		if (c->mm == p->mm)
 			continue;
+		if (mem && !task_in_mem_cgroup(c, mem))
+			continue;
 		if (!oom_kill_task(c))
 			return 0;
 	}
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index fc6ec1e..280529a 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -313,10 +313,21 @@
 	return hidp_queue_report(session, buf, rsize);
 }
 
-static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count)
+static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count,
+		unsigned char report_type)
 {
-	if (hidp_send_ctrl_message(hid->driver_data,
-			HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE,
+	switch (report_type) {
+	case HID_FEATURE_REPORT:
+		report_type = HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE;
+		break;
+	case HID_OUTPUT_REPORT:
+		report_type = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (hidp_send_ctrl_message(hid->driver_data, report_type,
 			data, count))
 		return -ENOMEM;
 	return count;
diff --git a/net/core/dev.c b/net/core/dev.c
index be9924f..ec87421 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2761,7 +2761,7 @@
 	switch (ret) {
 	case GRO_NORMAL:
 	case GRO_HELD:
-		skb->protocol = eth_type_trans(skb, napi->dev);
+		skb->protocol = eth_type_trans(skb, skb->dev);
 
 		if (ret == GRO_HELD)
 			skb_gro_pull(skb, -ETH_HLEN);
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index d8aee58..236a998 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -927,6 +927,7 @@
 	case ETHTOOL_GPERMADDR:
 	case ETHTOOL_GUFO:
 	case ETHTOOL_GGSO:
+	case ETHTOOL_GGRO:
 	case ETHTOOL_GFLAGS:
 	case ETHTOOL_GPFLAGS:
 	case ETHTOOL_GRXFH:
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index fbc1c74..099c753 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -410,7 +410,8 @@
 	const struct iw_statistics *iw;
 	ssize_t ret = -EINVAL;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (dev_isalive(dev)) {
 		iw = get_wireless_stats(dev);
 		if (iw)
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 040c4f0..26dec2b 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1317,14 +1317,19 @@
 {
 	int *valp = ctl->data;
 	int val = *valp;
+	loff_t pos = *ppos;
 	int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
 
 	if (write && *valp != val) {
 		struct net *net = ctl->extra2;
 
 		if (valp != &IPV4_DEVCONF_DFLT(net, FORWARDING)) {
-			if (!rtnl_trylock())
+			if (!rtnl_trylock()) {
+				/* Restore the original values before restarting */
+				*valp = val;
+				*ppos = pos;
 				return restart_syscall();
+			}
 			if (valp == &IPV4_DEVCONF_ALL(net, FORWARDING)) {
 				inet_forward_change(net);
 			} else if (*valp) {
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 76c0840..a42f658 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -946,7 +946,6 @@
 		break;
 	case IGMP_HOST_MEMBERSHIP_REPORT:
 	case IGMPV2_HOST_MEMBERSHIP_REPORT:
-	case IGMPV3_HOST_MEMBERSHIP_REPORT:
 		/* Is it our report looped back? */
 		if (skb_rtable(skb)->fl.iif == 0)
 			break;
@@ -960,6 +959,7 @@
 		in_dev_put(in_dev);
 		return pim_rcv_v1(skb);
 #endif
+	case IGMPV3_HOST_MEMBERSHIP_REPORT:
 	case IGMP_DVMRP:
 	case IGMP_TRACE:
 	case IGMP_HOST_LEAVE_MESSAGE:
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index 38fbf04..544ce08 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -124,16 +124,12 @@
 	if (x->props.mode == XFRM_MODE_TUNNEL) {
 		err = ipcomp_tunnel_attach(x);
 		if (err)
-			goto error_tunnel;
+			goto out;
 	}
 
 	err = 0;
 out:
 	return err;
-
-error_tunnel:
-	ipcomp_destroy(x);
-	goto out;
 }
 
 static const struct xfrm_type ipcomp_type = {
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 28e0296..3fddc69 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5783,11 +5783,9 @@
 
 				/* tcp_ack considers this ACK as duplicate
 				 * and does not calculate rtt.
-				 * Fix it at least with timestamps.
+				 * Force it here.
 				 */
-				if (tp->rx_opt.saw_tstamp &&
-				    tp->rx_opt.rcv_tsecr && !tp->srtt)
-					tcp_ack_saw_tstamp(sk, 0);
+				tcp_ack_update_rtt(sk, 0, 0);
 
 				if (tp->rx_opt.tstamp_ok)
 					tp->advmss -= TCPOLEN_TSTAMP_ALIGNED;
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index de7a194..143791d 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -502,8 +502,11 @@
 	if (p == &net->ipv6.devconf_dflt->forwarding)
 		return 0;
 
-	if (!rtnl_trylock())
+	if (!rtnl_trylock()) {
+		/* Restore the original values before restarting */
+		*p = old;
 		return restart_syscall();
+	}
 
 	if (p == &net->ipv6.devconf_all->forwarding) {
 		__s32 newf = net->ipv6.devconf_all->forwarding;
@@ -4028,12 +4031,15 @@
 {
 	int *valp = ctl->data;
 	int val = *valp;
+	loff_t pos = *ppos;
 	int ret;
 
 	ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
 
 	if (write)
 		ret = addrconf_fixup_forwarding(ctl, valp, val);
+	if (ret)
+		*ppos = pos;
 	return ret;
 }
 
@@ -4075,8 +4081,11 @@
 	if (p == &net->ipv6.devconf_dflt->disable_ipv6)
 		return 0;
 
-	if (!rtnl_trylock())
+	if (!rtnl_trylock()) {
+		/* Restore the original values before restarting */
+		*p = old;
 		return restart_syscall();
+	}
 
 	if (p == &net->ipv6.devconf_all->disable_ipv6) {
 		__s32 newf = net->ipv6.devconf_all->disable_ipv6;
@@ -4095,12 +4104,15 @@
 {
 	int *valp = ctl->data;
 	int val = *valp;
+	loff_t pos = *ppos;
 	int ret;
 
 	ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
 
 	if (write)
 		ret = addrconf_disable_ipv6(ctl, valp, val);
+	if (ret)
+		*ppos = pos;
 	return ret;
 }
 
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 2f2a5ca..002e6ee 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -154,16 +154,12 @@
 	if (x->props.mode == XFRM_MODE_TUNNEL) {
 		err = ipcomp6_tunnel_attach(x);
 		if (err)
-			goto error_tunnel;
+			goto out;
 	}
 
 	err = 0;
 out:
 	return err;
-error_tunnel:
-	ipcomp_destroy(x);
-
-	goto out;
 }
 
 static const struct xfrm_type ipcomp6_type =
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 1f2db64..22f0c2a 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -647,7 +647,7 @@
 	}
 	if (pos[1] != 0 &&
 	    (pos[1] != ifibss->ssid_len ||
-	     !memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
+	     memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
 		/* Ignore ProbeReq for foreign SSID */
 		return;
 	}
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index b9007f8..12a2bff 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -245,6 +245,9 @@
 		info->control.rates[i].count = 1;
 	}
 
+	if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
+		return;
+
 	if (sta && sdata->force_unicast_rateidx > -1) {
 		info->control.rates[0].idx = sdata->force_unicast_rateidx;
 	} else {
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index f934c96..bc17cf7 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -439,6 +439,16 @@
 	if (local->scan_req)
 		return -EBUSY;
 
+	if (req != local->int_scan_req &&
+	    sdata->vif.type == NL80211_IFTYPE_STATION &&
+	    !list_empty(&ifmgd->work_list)) {
+		/* actually wait for the work it's doing to finish/time out */
+		set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
+		local->scan_req = req;
+		local->scan_sdata = sdata;
+		return 0;
+	}
+
 	if (local->ops->hw_scan) {
 		u8 *ies;
 
@@ -463,14 +473,6 @@
 	local->scan_req = req;
 	local->scan_sdata = sdata;
 
-	if (req != local->int_scan_req &&
-	    sdata->vif.type == NL80211_IFTYPE_STATION &&
-	    !list_empty(&ifmgd->work_list)) {
-		/* actually wait for the work it's doing to finish/time out */
-		set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
-		return 0;
-	}
-
 	if (local->ops->hw_scan)
 		__set_bit(SCAN_HW_SCANNING, &local->scanning);
 	else
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index 743c013..8b4d6e3 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -125,6 +125,22 @@
 		.sadb_alg_maxbits = 256
 	}
 },
+{
+	.name = "rfc4543(gcm(aes))",
+
+	.uinfo = {
+		.aead = {
+			.icv_truncbits = 128,
+		}
+	},
+
+	.desc = {
+		.sadb_alg_id = SADB_X_EALG_NULL_AES_GMAC,
+		.sadb_alg_ivlen = 8,
+		.sadb_alg_minbits = 128,
+		.sadb_alg_maxbits = 256
+	}
+},
 };
 
 static struct xfrm_algo_desc aalg_list[] = {
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index b36cc34..f445ea1 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1102,7 +1102,7 @@
 	int err = -ENOMEM;
 	struct xfrm_state *x = xfrm_state_alloc(net);
 	if (!x)
-		goto error;
+		goto out;
 
 	memcpy(&x->id, &orig->id, sizeof(x->id));
 	memcpy(&x->sel, &orig->sel, sizeof(x->sel));
@@ -1160,16 +1160,10 @@
 	return x;
 
  error:
+	xfrm_state_put(x);
+out:
 	if (errp)
 		*errp = err;
-	if (x) {
-		kfree(x->aalg);
-		kfree(x->ealg);
-		kfree(x->calg);
-		kfree(x->encap);
-		kfree(x->coaddr);
-	}
-	kfree(x);
 	return NULL;
 }
 
diff --git a/scripts/.gitignore b/scripts/.gitignore
index 52cab46a..c5d5db5 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -6,5 +6,4 @@
 pnmtologo
 bin2c
 unifdef
-binoffset
 ihex2fw
diff --git a/scripts/binoffset.c b/scripts/binoffset.c
deleted file mode 100644
index 1a2e39b..0000000
--- a/scripts/binoffset.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/***************************************************************************
- * binoffset.c
- * (C) 2002 Randy Dunlap <rdunlap@xenotime.net>
-
-#   This program is free software; you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation; either version 2 of the License, or
-#   (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#   GNU General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program; if not, write to the Free Software
-#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-# binoffset.c:
-# - searches a (binary) file for a specified (binary) pattern
-# - returns the offset of the located pattern or ~0 if not found
-# - exits with exit status 0 normally or non-0 if pattern is not found
-#   or any other error occurs.
-
-****************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/mman.h>
-
-#define VERSION		"0.1"
-#define BUF_SIZE	(16 * 1024)
-#define PAT_SIZE	100
-
-char		*progname;
-char		*inputname;
-int		inputfd;
-unsigned int	bix;			/* buf index */
-unsigned char	patterns [PAT_SIZE] = {0}; /* byte-sized pattern array */
-int		pat_len;		/* actual number of pattern bytes */
-unsigned char	*madr;			/* mmap address */
-size_t		filesize;
-int		num_matches = 0;
-off_t		firstloc = 0;
-
-void usage (void)
-{
-	fprintf (stderr, "%s ver. %s\n", progname, VERSION);
-	fprintf (stderr, "usage:  %s filename pattern_bytes\n",
-			progname);
-	fprintf (stderr, "        [prints location of pattern_bytes in file]\n");
-	exit (1);
-}
-
-void get_pattern (int pat_count, char *pats [])
-{
-	int ix, err, tmp;
-
-#ifdef DEBUG
-	fprintf (stderr,"get_pattern: count = %d\n", pat_count);
-	for (ix = 0; ix < pat_count; ix++)
-		fprintf (stderr, "  pat # %d:  [%s]\n", ix, pats[ix]);
-#endif
-
-	for (ix = 0; ix < pat_count; ix++) {
-		tmp = 0;
-		err = sscanf (pats[ix], "%5i", &tmp);
-		if (err != 1 || tmp > 0xff) {
-			fprintf (stderr, "pattern or value error in pattern # %d [%s]\n",
-					ix, pats[ix]);
-			usage ();
-		}
-		patterns [ix] = tmp;
-	}
-	pat_len = pat_count;
-}
-
-void search_pattern (void)
-{
-	for (bix = 0; bix < filesize; bix++) {
-		if (madr[bix] == patterns[0]) {
-			if (memcmp (&madr[bix], patterns, pat_len) == 0) {
-				if (num_matches == 0)
-					firstloc = bix;
-				num_matches++;
-			}
-		}
-	}
-}
-
-#ifdef NOTDEF
-size_t get_filesize (int fd)
-{
-	off_t end_off = lseek (fd, 0, SEEK_END);
-	lseek (fd, 0, SEEK_SET);
-	return (size_t) end_off;
-}
-#endif
-
-size_t get_filesize (int fd)
-{
-	int err;
-	struct stat stat;
-
-	err = fstat (fd, &stat);
-	fprintf (stderr, "filesize: %ld\n", err < 0 ? (long)err : stat.st_size);
-	if (err < 0)
-		return err;
-	return (size_t) stat.st_size;
-}
-
-int main (int argc, char *argv [])
-{
-	progname = argv[0];
-
-	if (argc < 3)
-		usage ();
-
-	get_pattern (argc - 2, argv + 2);
-
-	inputname = argv[1];
-
-	inputfd = open (inputname, O_RDONLY);
-	if (inputfd == -1) {
-		fprintf (stderr, "%s: cannot open '%s'\n",
-				progname, inputname);
-		exit (3);
-	}
-
-	filesize = get_filesize (inputfd);
-
-	madr = mmap (0, filesize, PROT_READ, MAP_PRIVATE, inputfd, 0);
-	if (madr == MAP_FAILED) {
-		fprintf (stderr, "mmap error = %d\n", errno);
-		close (inputfd);
-		exit (4);
-	}
-
-	search_pattern ();
-
-	if (munmap (madr, filesize))
-		fprintf (stderr, "munmap error = %d\n", errno);
-
-	if (close (inputfd))
-		fprintf (stderr, "%s: error %d closing '%s'\n",
-				progname, errno, inputname);
-
-	fprintf (stderr, "number of pattern matches = %d\n", num_matches);
-	if (num_matches == 0)
-		firstloc = ~0;
-	printf ("%ld\n", firstloc);
-	fprintf (stderr, "%ld\n", firstloc);
-
-	exit (num_matches ? 0 : 2);
-}
-
-/* end binoffset.c */
diff --git a/scripts/extract-ikconfig b/scripts/extract-ikconfig
index de233ff..37f30d3 100755
--- a/scripts/extract-ikconfig
+++ b/scripts/extract-ikconfig
@@ -1,92 +1,53 @@
 #!/bin/sh
-# extracts .config info from a [b]zImage file
-# uses: binoffset (new), dd, zcat, strings, grep
-# $arg1 is [b]zImage filename
+# ----------------------------------------------------------------------
+# extract-ikconfig - Extract the .config file from a kernel image
+#
+# This will only work when the kernel was compiled with CONFIG_IKCONFIG.
+#
+# The obscure use of the "tr" filter is to work around older versions of
+# "grep" that report the byte offset of the line instead of the pattern.
+#
+# (c) 2009, Dick Streefland <dick@streefland.net>
+# Licensed under the terms of the GNU General Public License.
+# ----------------------------------------------------------------------
 
-binoffset="./scripts/binoffset"
-test -e $binoffset || cc -o $binoffset ./scripts/binoffset.c || exit 1
+gz1='\037\213\010'
+gz2='01'
+cf1='IKCFG_ST\037\213\010'
+cf2='0123456789'
 
-IKCFG_ST="0x49 0x4b 0x43 0x46 0x47 0x5f 0x53 0x54"
-IKCFG_ED="0x49 0x4b 0x43 0x46 0x47 0x5f 0x45 0x44"
-dump_config() {
-    file="$1"
-
-    start=`$binoffset $file $IKCFG_ST 2>/dev/null`
-    [ "$?" != "0" ] && start="-1"
-    if [ "$start" -eq "-1" ]; then
-	return
-    fi
-    end=`$binoffset $file $IKCFG_ED 2>/dev/null`
-    [ "$?" != "0" ] && end="-1"
-    if [ "$end" -eq "-1" ]; then
-	return
-    fi
-
-    start=`expr $start + 8`
-    size=`expr $end - $start`
-
-    dd if="$file" ibs=1 skip="$start" count="$size" 2>/dev/null | zcat
-
-    clean_up
-    exit 0
-}
-
-
-usage()
+dump_config()
 {
-	echo "  usage: extract-ikconfig [b]zImage_filename"
-}
-
-clean_up()
-{
-	if [ "$TMPFILE" != "" ]; then
-		rm -f $TMPFILE
+	if	pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"`
+	then
+		pos=${pos%%:*}
+		tail -c+$(($pos+8)) "$1" | zcat -q
+		exit 0
 	fi
 }
 
-if [ $# -lt 1 ]
+# Check invocation:
+me=${0##*/}
+img=$1
+if	[ $# -ne 1 -o ! -s "$img" ]
 then
-	usage
-	exit 1
+	echo "Usage: $me <kernel-image>" >&2
+	exit 2
 fi
 
-TMPFILE=`mktemp -t ikconfig-XXXXXX` || exit 1
-image="$1"
+# Initial attempt for uncompressed images or objects:
+dump_config "$img"
 
-# vmlinux: Attempt to dump the configuration from the file directly
-dump_config "$image"
+# That didn't work, so decompress and try again:
+tmp=/tmp/ikconfig$$
+trap "rm -f $tmp" 0
+for	pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"`
+do
+	pos=${pos%%:*}
+	tail -c+$pos "$img" | zcat 2> /dev/null > $tmp
+	dump_config $tmp
+done
 
-GZHDR1="0x1f 0x8b 0x08 0x00"
-GZHDR2="0x1f 0x8b 0x08 0x08"
-
-ELFHDR="0x7f 0x45 0x4c 0x46"
-
-# vmlinux.gz: Check for a compressed images
-off=`$binoffset "$image" $GZHDR1 2>/dev/null`
-[ "$?" != "0" ] && off="-1"
-if [ "$off" -eq "-1" ]; then
-	off=`$binoffset "$image" $GZHDR2 2>/dev/null`
-	[ "$?" != "0" ] && off="-1"
-fi
-if [ "$off" -eq "0" ]; then
-	zcat <"$image" >"$TMPFILE"
-	dump_config "$TMPFILE"
-elif [ "$off" -ne "-1" ]; then
-	(dd ibs="$off" skip=1 count=0 && dd bs=512k) <"$image" 2>/dev/null | \
-		zcat >"$TMPFILE"
-	dump_config "$TMPFILE"
-
-# check if this is simply an ELF file
-else
-	off=`$binoffset "$image" $ELFHDR 2>/dev/null`
-	[ "$?" != "0" ] && off="-1"
-	if [ "$off" -eq "0" ]; then
-		dump_config "$image"
-	fi
-fi
-
-echo "ERROR: Unable to extract kernel configuration information."
-echo "       This kernel image may not have the config info."
-
-clean_up
+# Bail out:
+echo "$me: Cannot find kernel config." >&2
 exit 1
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 999e8a7..186c466 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -30,8 +30,17 @@
 	$(Q)mkdir -p include/generated
 	$< -s $(Kconfig)
 
+# if no path is given, then use src directory to find file
+ifdef LSMOD
+LSMOD_F := $(LSMOD)
+ifeq ($(findstring /,$(LSMOD)),)
+  LSMOD_F := $(objtree)/$(LSMOD)
+endif
+endif
+
 localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
-	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
+	$(Q)mkdir -p include/generated
+	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
 	$(Q)if [ -f .config ]; then 				\
 			cmp -s .tmp.config .config ||		\
 			(mv -f .config .config.old.1;		\
@@ -45,7 +54,8 @@
 	$(Q)rm -f .tmp.config
 
 localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
-	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
+	$(Q)mkdir -p include/generated
+	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
 	$(Q)sed -i s/=m/=y/ .tmp.config
 	$(Q)if [ -f .config ]; then 				\
 			cmp -s .tmp.config .config ||		\
diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl
index 0d80082..afbd54a 100644
--- a/scripts/kconfig/streamline_config.pl
+++ b/scripts/kconfig/streamline_config.pl
@@ -113,6 +113,7 @@
 # Get the build source and top level Kconfig file (passed in)
 my $ksource = $ARGV[0];
 my $kconfig = $ARGV[1];
+my $lsmod_file = $ARGV[2];
 
 my @makefiles = `find $ksource -name Makefile`;
 my %depends;
@@ -121,6 +122,8 @@
 my %objects;
 my $var;
 my $cont = 0;
+my $iflevel = 0;
+my @ifdeps;
 
 # prevent recursion
 my %read_kconfigs;
@@ -146,6 +149,15 @@
 	    $state = "NEW";
 	    $config = $1;
 
+	    for (my $i = 0; $i < $iflevel; $i++) {
+		if ($i) {
+		    $depends{$config} .= " " . $ifdeps[$i];
+		} else {
+		    $depends{$config} = $ifdeps[$i];
+		}
+		$state = "DEP";
+	    }
+
 	# collect the depends for the config
 	} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
 	    $state = "DEP";
@@ -166,6 +178,21 @@
 	    # note if the config has a prompt
 	    $prompt{$config} = 1;
 
+	# Check for if statements
+	} elsif (/^if\s+(.*\S)\s*$/) {
+	    my $deps = $1;
+	    # remove beginning and ending non text
+	    $deps =~ s/^[^a-zA-Z0-9_]*//;
+	    $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+	    my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+	    $ifdeps[$iflevel++] = join ':', @deps;
+
+	} elsif (/^endif/) {
+
+	    $iflevel-- if ($iflevel);
+
 	# stop on "help"
 	} elsif (/^\s*help\s*$/) {
 	    $state = "NONE";
@@ -237,8 +264,36 @@
 
 my %modules;
 
-# see what modules are loaded on this system
-open(LIN,"/sbin/lsmod|") || die "Cant lsmod";
+if (defined($lsmod_file)) {
+    if ( ! -f $lsmod_file) {
+	die "$lsmod_file not found";
+    }
+    if ( -x $lsmod_file) {
+	# the file is executable, run it
+	open(LIN, "$lsmod_file|");
+    } else {
+	# Just read the contents
+	open(LIN, "$lsmod_file");
+    }
+} else {
+
+    # see what modules are loaded on this system
+    my $lsmod;
+
+    foreach $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) {
+	if ( -x "$dir/lsmod" ) {
+	    $lsmod = "$dir/lsmod";
+	    last;
+	}
+}
+    if (!defined($lsmod)) {
+	# try just the path
+	$lsmod = "lsmod";
+    }
+
+    open(LIN,"$lsmod|") || die "Can not call lsmod with $lsmod";
+}
+
 while (<LIN>) {
 	next if (/^Module/);  # Skip the first line.
 	if (/^(\S+)/) {
diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c
index 0d83edc..2d4d05d 100644
--- a/security/integrity/ima/ima_iint.c
+++ b/security/integrity/ima/ima_iint.c
@@ -63,12 +63,11 @@
 	spin_lock(&ima_iint_lock);
 	rc = radix_tree_insert(&ima_iint_store, (unsigned long)inode, iint);
 	spin_unlock(&ima_iint_lock);
+	radix_tree_preload_end();
 out:
 	if (rc < 0)
 		kmem_cache_free(iint_cache, iint);
 
-	radix_tree_preload_end();
-
 	return rc;
 }
 
diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c
index 68c7348..04b6145 100644
--- a/security/selinux/ss/ebitmap.c
+++ b/security/selinux/ss/ebitmap.c
@@ -128,7 +128,7 @@
 			cmap_idx = delta / NETLBL_CATMAP_MAPSIZE;
 			cmap_sft = delta % NETLBL_CATMAP_MAPSIZE;
 			c_iter->bitmap[cmap_idx]
-				|= e_iter->maps[cmap_idx] << cmap_sft;
+				|= e_iter->maps[i] << cmap_sft;
 		}
 		e_iter = e_iter->next;
 	}
diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c
index 586965f..7a437da 100644
--- a/sound/aoa/fabrics/layout.c
+++ b/sound/aoa/fabrics/layout.c
@@ -768,7 +768,7 @@
 				"required property %s not present\n", propname);
 			return -ENODEV;
 		}
-		if (*ref != codec->node->linux_phandle) {
+		if (*ref != codec->node->phandle) {
 			printk(KERN_INFO "snd-aoa-fabric-layout: "
 				"%s doesn't match!\n", propname);
 			return -ENODEV;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 3600e9c..ff6da6f 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2350,7 +2350,7 @@
  */
 static struct snd_pci_quirk msi_black_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
-	SND_PCI_QUIRK(0x1043, 0x829c, "ASUS", 0), /* nvidia */
+	SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
 	{}
 };
 
diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 2e15646..b366793 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -751,8 +751,8 @@
 
 static void snd_pmac_awacs_resume(struct snd_pmac *chip)
 {
-	if (machine_is_compatible("PowerBook3,1")
-	    || machine_is_compatible("PowerBook3,2")) {
+	if (of_machine_is_compatible("PowerBook3,1")
+	    || of_machine_is_compatible("PowerBook3,2")) {
 		msleep(100);
 		snd_pmac_awacs_write_reg(chip, 1,
 			chip->awacs_reg[1] & ~MASK_PAROUT);
@@ -780,16 +780,16 @@
 }
 #endif /* CONFIG_PM */
 
-#define IS_PM7500 (machine_is_compatible("AAPL,7500") \
-		|| machine_is_compatible("AAPL,8500") \
-		|| machine_is_compatible("AAPL,9500"))
-#define IS_PM5500 (machine_is_compatible("AAPL,e411"))
-#define IS_BEIGE (machine_is_compatible("AAPL,Gossamer"))
-#define IS_IMAC1 (machine_is_compatible("PowerMac2,1"))
-#define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \
-		|| machine_is_compatible("PowerMac4,1"))
-#define IS_G4AGP (machine_is_compatible("PowerMac3,1"))
-#define IS_LOMBARD (machine_is_compatible("PowerBook1,1"))
+#define IS_PM7500 (of_machine_is_compatible("AAPL,7500") \
+		|| of_machine_is_compatible("AAPL,8500") \
+		|| of_machine_is_compatible("AAPL,9500"))
+#define IS_PM5500 (of_machine_is_compatible("AAPL,e411"))
+#define IS_BEIGE (of_machine_is_compatible("AAPL,Gossamer"))
+#define IS_IMAC1 (of_machine_is_compatible("PowerMac2,1"))
+#define IS_IMAC2 (of_machine_is_compatible("PowerMac2,2") \
+		|| of_machine_is_compatible("PowerMac4,1"))
+#define IS_G4AGP (of_machine_is_compatible("PowerMac3,1"))
+#define IS_LOMBARD (of_machine_is_compatible("PowerBook1,1"))
 
 static int imac1, imac2;
 
diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c
index 0accfe4..1f72e1c 100644
--- a/sound/ppc/burgundy.c
+++ b/sound/ppc/burgundy.c
@@ -582,7 +582,7 @@
 static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_notify)
 {
 	if (chip->auto_mute) {
-		int imac = machine_is_compatible("iMac");
+		int imac = of_machine_is_compatible("iMac");
 		int reg, oreg;
 		reg = oreg = snd_pmac_burgundy_rcb(chip,
 				MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES);
@@ -620,7 +620,7 @@
  */
 int __devinit snd_pmac_burgundy_init(struct snd_pmac *chip)
 {
-	int imac = machine_is_compatible("iMac");
+	int imac = of_machine_is_compatible("iMac");
 	int i, err;
 
 	/* Checks to see the chip is alive and kicking */
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 7bc492e..8508117 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -922,11 +922,11 @@
 	}
 
 	/* it seems the Pismo & iBook can't byte-swap in hardware. */
-	if (machine_is_compatible("PowerBook3,1") ||
-	    machine_is_compatible("PowerBook2,1"))
+	if (of_machine_is_compatible("PowerBook3,1") ||
+	    of_machine_is_compatible("PowerBook2,1"))
 		chip->can_byte_swap = 0 ;
 
-	if (machine_is_compatible("PowerBook2,1"))
+	if (of_machine_is_compatible("PowerBook2,1"))
 		chip->can_duplex = 0;
 }
 
@@ -959,11 +959,11 @@
 	chip->control_mask = MASK_IEPC | MASK_IEE | 0x11; /* default */
 
 	/* check machine type */
-	if (machine_is_compatible("AAPL,3400/2400")
-	    || machine_is_compatible("AAPL,3500"))
+	if (of_machine_is_compatible("AAPL,3400/2400")
+	    || of_machine_is_compatible("AAPL,3500"))
 		chip->is_pbook_3400 = 1;
-	else if (machine_is_compatible("PowerBook1,1")
-		 || machine_is_compatible("AAPL,PowerBook1998"))
+	else if (of_machine_is_compatible("PowerBook1,1")
+		 || of_machine_is_compatible("AAPL,PowerBook1998"))
 		chip->is_pbook_G3 = 1;
 	chip->node = of_find_node_by_name(NULL, "awacs");
 	sound = of_node_get(chip->node);
@@ -1033,8 +1033,8 @@
 	}
 	if (of_device_is_compatible(sound, "tumbler")) {
 		chip->model = PMAC_TUMBLER;
-		chip->can_capture = machine_is_compatible("PowerMac4,2")
-				|| machine_is_compatible("PowerBook4,1");
+		chip->can_capture = of_machine_is_compatible("PowerMac4,2")
+				|| of_machine_is_compatible("PowerBook4,1");
 		chip->can_duplex = 0;
 		// chip->can_byte_swap = 0; /* FIXME: check this */
 		chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
index 3326e2a..1a5b8e0 100644
--- a/sound/soc/fsl/efika-audio-fabric.c
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -55,7 +55,7 @@
 	struct platform_device *pdev;
 	int rc;
 
-	if (!machine_is_compatible("bplan,efika"))
+	if (!of_machine_is_compatible("bplan,efika"))
 		return -ENODEV;
 
 	card.platform = &mpc5200_audio_dma_platform;
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
index b928ef7..6644cba 100644
--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -55,7 +55,7 @@
 	struct platform_device *pdev;
 	int rc;
 
-	if (!machine_is_compatible("phytec,pcm030"))
+	if (!of_machine_is_compatible("phytec,pcm030"))
 		return -ENODEV;
 
 	card.platform = &mpc5200_audio_dma_platform;
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index ddc584b..4b91d8c 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -705,7 +705,7 @@
 		fprintf(stdout, "\t[w]     toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0);
 
 	fprintf(stdout,
-		"\t[K]     hide kernel_symbols symbols.             \t(%s)\n",
+		"\t[K]     hide kernel_symbols symbols.     \t(%s)\n",
 		hide_kernel_symbols ? "yes" : "no");
 	fprintf(stdout,
 		"\t[U]     hide user symbols.               \t(%s)\n",
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index bb0fd6d..8a9e6ba 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -295,10 +295,10 @@
 	al->thread = self;
 	al->addr = addr;
 
-	if (cpumode & PERF_RECORD_MISC_KERNEL) {
+	if (cpumode == PERF_RECORD_MISC_KERNEL) {
 		al->level = 'k';
 		mg = &session->kmaps;
-	} else if (cpumode & PERF_RECORD_MISC_USER)
+	} else if (cpumode == PERF_RECORD_MISC_USER)
 		al->level = '.';
 	else {
 		al->level = 'H';
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 29465d4..fde17b0 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -272,6 +272,7 @@
 	int ret;
 
 	pp->probes[0] = buf = zalloc(MAX_CMDLEN);
+	pp->found = 1;
 	if (!buf)
 		die("Failed to allocate memory by zalloc.");
 	if (pp->offset) {
@@ -294,6 +295,7 @@
 error:
 		free(pp->probes[0]);
 		pp->probes[0] = NULL;
+		pp->found = 0;
 	}
 	return ret;
 }
@@ -455,6 +457,7 @@
 	struct strlist *rawlist;
 	struct str_node *ent;
 
+	memset(&pp, 0, sizeof(pp));
 	fd = open_kprobe_events(O_RDONLY, 0);
 	rawlist = get_trace_kprobe_event_rawlist(fd);
 	close(fd);