Merge tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu dt changes for v3.15 (incremental #4)" from Jason Cooper:
- dove
- add system controller node
- drop pinctrl PMU reg property _before_ it hits mainline and becomes ABI
- mvebu
- XP/370
- change default PCIe apertures
- switch GP and DB boards internal registers to 0xf1000000
- correct RAM size on Matrix board
- 385
- correct phy connection type for DB board
- add RD board
* tag 'mvebu-dt-3.15-4' of git://git.infradead.org/linux-mvebu:
ARM: dove: drop pinctrl PMU reg property
ARM: mvebu: add Device Tree for the Armada 385 RD board
ARM: mvebu: use the correct phy connection mode on Armada 385 DB
ARM: mvebu: the Armada XP Matrix board has 4 GB
ARM: mvebu: switch the Armada XP GP to use internal registers at 0xf1000000
ARM: mvebu: switch the Armada XP DB to use internal registers at 0xf1000000
ARM: mvebu: change the default PCIe apertures for Armada 370/XP
ARM: dove: add system controller node
Conflicts:
arch/arm/boot/dts/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/.gitignore b/.gitignore
index 7e9932e..42fa0d5 100644
--- a/.gitignore
+++ b/.gitignore
@@ -92,3 +92,6 @@
signing_key.priv
signing_key.x509
x509.genkey
+
+# Kconfig presets
+all.config
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 38f8444..07de7e1 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -29,6 +29,8 @@
- How to do DMA with ISA (and LPC) devices.
DMA-attributes.txt
- listing of the various possible attributes a DMA region can have
+dmatest.txt
+ - how to compile, configure and use the dmatest system.
DocBook/
- directory with DocBook templates etc. for kernel documentation.
EDID/
@@ -77,6 +79,8 @@
- directory with info about Linux on the ARM architecture.
arm64/
- directory with info about Linux on the 64 bit ARM architecture.
+assoc_array.txt
+ - generic associative array intro.
atomic_ops.txt
- semantics and behavior of atomic and bitmask operations.
auxdisplay/
@@ -87,6 +91,8 @@
- how to use kernel parameters to exclude bad RAM regions.
basic_profiling.txt
- basic instructions for those who wants to profile Linux kernel.
+bcache.txt
+ - Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
binfmt_misc.txt
- info on the kernel support for extra binary formats.
blackfin/
@@ -171,6 +177,8 @@
- info about initramfs, klibc, and userspace early during boot.
edac.txt
- information on EDAC - Error Detection And Correction
+efi-stub.txt
+ - How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
eisa.txt
- info on EISA bus support.
email-clients.txt
@@ -195,8 +203,8 @@
- info on requeueing of tasks from a non-PI futex to a PI futex
gcov.txt
- use of GCC's coverage testing tool "gcov" with the Linux kernel
-gpio.txt
- - overview of GPIO (General Purpose Input/Output) access conventions.
+gpio/
+ - gpio related documentation
hid/
- directory with information on human interface devices
highuid.txt
@@ -255,6 +263,8 @@
- listing of various WWW + books that document kernel internals.
kernel-parameters.txt
- summary listing of command line / boot prompt args for the kernel.
+kernel-per-CPU-kthreads.txt
+ - List of all per-CPU kthreads and how they introduce jitter.
kmemcheck.txt
- info on dynamic checker that detects uses of uninitialized memory.
kmemleak.txt
@@ -299,8 +309,6 @@
- directory with info on parts like the Texas Instruments EMIF driver
memory-hotplug.txt
- Hotpluggable memory support, how to use and current status.
-memory.txt
- - info on typical Linux memory problems.
metag/
- directory with info about Linux on Meta architecture.
mips/
@@ -311,6 +319,8 @@
- directory with info about the MMC subsystem
mn10300/
- directory with info about the mn10300 architecture port
+module-signing.txt
+ - Kernel module signing for increased security when loading modules.
mtd/
- directory with info about memory technology devices (flash)
mono.txt
@@ -343,6 +353,8 @@
- info on the Linux PCMCIA driver.
percpu-rw-semaphore.txt
- RCU based read-write semaphore optimized for locking for reading
+phy.txt
+ - Description of the generic PHY framework.
pi-futex.txt
- documentation on lightweight priority inheritance futexes.
pinctrl.txt
@@ -431,6 +443,8 @@
- info on the magic SysRq key.
target/
- directory with info on generating TCM v4 fabric .ko modules
+this_cpu_ops.txt
+ - List rationale behind and the way to use this_cpu operations.
thermal/
- directory with information on managing thermal issues (CPU/temp)
trace/
@@ -469,6 +483,8 @@
- directory with info about Intel Wireless Wimax Connections
workqueue.txt
- information on the Concurrency Managed Workqueue implementation
+ww-mutex-design.txt
+ - Intro to Mutex wait/would deadlock handling.s
x86/x86_64/
- directory with info on Linux support for AMD x86-64 (Hammer) machines.
xtensa/
diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index ad22fb0..a2ccec3 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -3,7 +3,8 @@
Contact: Kay Sievers <kay.sievers@vrfy.org>
Description:
Shows the list of currently configured
- console devices, like 'tty1 ttyS0'.
+ tty devices used for the console,
+ like 'tty1 ttyS0'.
The last entry in the file is the active
device connected to /dev/console.
The file supports poll() to detect virtual
diff --git a/Documentation/RCU/00-INDEX b/Documentation/RCU/00-INDEX
index 1d7a885..fa57139 100644
--- a/Documentation/RCU/00-INDEX
+++ b/Documentation/RCU/00-INDEX
@@ -8,6 +8,8 @@
- Using RCU to Protect Read-Mostly Linked Lists
lockdep.txt
- RCU and lockdep checking
+lockdep-splat.txt
+ - RCU Lockdep splats explained.
NMI-RCU.txt
- Using RCU to Protect Dynamic NMI Handlers
rcubarrier.txt
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index 36420e1..a94090c 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -4,6 +4,8 @@
- requirements for booting
Interrupts
- ARM Interrupt subsystem documentation
+IXP4xx
+ - Intel IXP4xx Network processor.
msm
- MSM specific documentation
Netwinder
@@ -24,8 +26,16 @@
- ST SPEAr platform Linux Overview
VFP/
- Release notes for Linux Kernel Vector Floating Point support code
+cluster-pm-race-avoidance.txt
+ - Algorithm for CPU and Cluster setup/teardown
empeg/
- Ltd's Empeg MP3 Car Audio Player
+firmware.txt
+ - Secure firmware registration and calling.
+kernel_mode_neon.txt
+ - How to use NEON instructions in kernel mode
+kernel_user_helpers.txt
+ - Helper functions in kernel space made available for userspace.
mem_alignment
- alignment abort handler documentation
memory.txt
@@ -34,3 +44,7 @@
- NWFPE floating point emulator documentation
swp_emulation
- SWP/SWPB emulation handler/logging description
+tcm.txt
+ - ARM Tightly Coupled Memory
+vlocks.txt
+ - Voting locks, low-level mechanism relying on memory system atomic writes.
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README
index 5a930c1..963ec44 100644
--- a/Documentation/arm/Marvell/README
+++ b/Documentation/arm/Marvell/README
@@ -83,14 +83,24 @@
88F6710
88F6707
88F6W11
+ Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
+
+ Armada 375 Flavors:
+ 88F6720
+ Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf
+
+ Armada 380/385 Flavors:
+ 88F6810
+ 88F6820
+ 88F6828
Armada XP Flavors:
MV78230
MV78260
MV78460
NOTE: not to be confused with the non-SMP 78xx0 SoCs
+ Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
- Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
No public datasheet available.
Core: Sheeva ARMv7 compatible
diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX
index 2df0365..c54fcdd 100644
--- a/Documentation/blackfin/00-INDEX
+++ b/Documentation/blackfin/00-INDEX
@@ -1,8 +1,10 @@
00-INDEX
- This file
-
+Makefile
+ - Makefile for gptimers example file.
bfin-gpio-notes.txt
- Notes in developing/using bfin-gpio driver.
-
bfin-spi-notes.txt
- Notes for using bfin spi bus driver.
+gptimers-example.c
+ - gptimers example
diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX
index 929d990..e840b47 100644
--- a/Documentation/block/00-INDEX
+++ b/Documentation/block/00-INDEX
@@ -14,6 +14,8 @@
- Deadline IO scheduler tunables
ioprio.txt
- Block io priorities (in CFQ scheduler)
+null_blk.txt
+ - Null block for block-layer benchmarking.
queue-sysfs.txt
- Queue's sysfs entries
request.txt
diff --git a/Documentation/devicetree/00-INDEX b/Documentation/devicetree/00-INDEX
index b78f691..8c4102c 100644
--- a/Documentation/devicetree/00-INDEX
+++ b/Documentation/devicetree/00-INDEX
@@ -8,3 +8,5 @@
- this file
booting-without-of.txt
- Booting Linux without Open Firmware, describes history and format of device trees.
+usage-model.txt
+ - How Linux uses DT and what DT aims to solve.
\ No newline at end of file
diff --git a/Documentation/devicetree/bindings/arm/armada-375.txt b/Documentation/devicetree/bindings/arm/armada-375.txt
new file mode 100644
index 0000000..867d0b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-375.txt
@@ -0,0 +1,9 @@
+Marvell Armada 375 Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 375 family shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada375"
diff --git a/Documentation/devicetree/bindings/arm/armada-38x.txt b/Documentation/devicetree/bindings/arm/armada-38x.txt
new file mode 100644
index 0000000..11f2330
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-38x.txt
@@ -0,0 +1,10 @@
+Marvell Armada 38x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 38x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain either "marvell,armada380" or
+ "marvell,armada385" depending on the variant of the SoC being used.
diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
index 63c0e6a..ad16e7a 100644
--- a/Documentation/devicetree/bindings/arm/keystone/keystone.txt
+++ b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
@@ -8,3 +8,13 @@
- compatible: All TI specific devices present in Keystone SOC should be in
the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
type UART should use the specified compatible for those devices.
+
+Boards:
+- Keystone 2 Hawking/Kepler EVM
+ compatible = "ti,k2hk-evm"
+
+- Keystone 2 Lamarr EVM
+ compatible = "ti,k2l-evm"
+
+- Keystone 2 Edison EVM
+ compatible = "ti,k2e-evm"
diff --git a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
new file mode 100644
index 0000000..0d244b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
@@ -0,0 +1,16 @@
+* Marvell Feroceon Cache
+
+Required properties:
+- compatible : Should be either "marvell,feroceon-cache" or
+ "marvell,kirkwood-cache".
+
+Optional properties:
+- reg : Address of the L2 cache control register. Mandatory for
+ "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
+
+
+Example:
+ l2: l2-cache@20128 {
+ compatible = "marvell,kirkwood-cache";
+ reg = <0x20128 0x4>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt b/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt
index 081c6a7..d24ab2e 100644
--- a/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt
@@ -1,12 +1,13 @@
MVEBU System Controller
-----------------------
-MVEBU (Marvell SOCs: Armada 370/XP, Dove, mv78xx0, Kirkwood, Orion5x)
+MVEBU (Marvell SOCs: Armada 370/375/XP, Dove, mv78xx0, Kirkwood, Orion5x)
Required properties:
- compatible: one of:
- "marvell,orion-system-controller"
- "marvell,armada-370-xp-system-controller"
+ - "marvell,armada-375-system-controller"
- reg: Should contain system controller registers location and length.
Example:
diff --git a/Documentation/devicetree/bindings/arm/omap/dmm.txt b/Documentation/devicetree/bindings/arm/omap/dmm.txt
new file mode 100644
index 0000000..8bd6d0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/dmm.txt
@@ -0,0 +1,22 @@
+OMAP Dynamic Memory Manager (DMM) bindings
+
+The dynamic memory manager (DMM) is a module located immediately in front of the
+SDRAM controllers (called EMIFs on OMAP). DMM manages various aspects of memory
+accesses such as priority generation amongst initiators, configuration of SDRAM
+interleaving, optimizing transfer of 2D block objects, and provide MMU-like page
+translation for initiators which need contiguous dma bus addresses.
+
+Required properties:
+- compatible: Should contain "ti,omap4-dmm" for OMAP4 family
+ Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
+- reg: Contains DMM register address range (base address and length)
+- interrupts: Should contain an interrupt-specifier for DMM_IRQ.
+- ti,hwmods: Name of the hwmod associated to DMM, which is typically "dmm"
+
+Example:
+
+dmm@4e000000 {
+ compatible = "ti,omap4-dmm";
+ reg = <0x4e000000 0x800>;
+ ti,hwmods = "dmm";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 34dc40c..775ea6a 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -99,6 +99,9 @@
- OMAP4 PandaBoard : Low cost community board
compatible = "ti,omap4-panda", "ti,omap4430"
+- OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board
+ compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
compatible = "ti,omap3-evm", "ti,omap3"
@@ -114,5 +117,8 @@
- AM43x EPOS EVM
compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
+- AM437x GP EVM
+ compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
+
- DRA7 EVM: Software Developement Board for DRA7XX
compatible = "ti,dra7-evm", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
new file mode 100644
index 0000000..f1f1552
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -0,0 +1,15 @@
+SAMSUNG Exynos SoC series PMU Registers
+
+Properties:
+ - compatible : should contain two values. First value must be one from following list:
+ - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+ - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
+ second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+Example :
+pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5250-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+};
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
index a2ac2d9..f5a5b19 100644
--- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -15,259 +15,12 @@
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume. Some of the clocks are available only on a particular
-Exynos4 SoC and this is specified where applicable.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
-
- [Core Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- xxti 1
- xusbxti 2
- fin_pll 3
- fout_apll 4
- fout_mpll 5
- fout_epll 6
- fout_vpll 7
- sclk_apll 8
- sclk_mpll 9
- sclk_epll 10
- sclk_vpll 11
- arm_clk 12
- aclk200 13
- aclk100 14
- aclk160 15
- aclk133 16
- mout_mpll_user_t 17 Exynos4x12
- mout_mpll_user_c 18 Exynos4x12
- mout_core 19
- mout_apll 20
-
-
- [Clock Gate for Special Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- sclk_fimc0 128
- sclk_fimc1 129
- sclk_fimc2 130
- sclk_fimc3 131
- sclk_cam0 132
- sclk_cam1 133
- sclk_csis0 134
- sclk_csis1 135
- sclk_hdmi 136
- sclk_mixer 137
- sclk_dac 138
- sclk_pixel 139
- sclk_fimd0 140
- sclk_mdnie0 141 Exynos4412
- sclk_mdnie_pwm0 12 142 Exynos4412
- sclk_mipi0 143
- sclk_audio0 144
- sclk_mmc0 145
- sclk_mmc1 146
- sclk_mmc2 147
- sclk_mmc3 148
- sclk_mmc4 149
- sclk_sata 150 Exynos4210
- sclk_uart0 151
- sclk_uart1 152
- sclk_uart2 153
- sclk_uart3 154
- sclk_uart4 155
- sclk_audio1 156
- sclk_audio2 157
- sclk_spdif 158
- sclk_spi0 159
- sclk_spi1 160
- sclk_spi2 161
- sclk_slimbus 162
- sclk_fimd1 163 Exynos4210
- sclk_mipi1 164 Exynos4210
- sclk_pcm1 165
- sclk_pcm2 166
- sclk_i2s1 167
- sclk_i2s2 168
- sclk_mipihsi 169 Exynos4412
- sclk_mfc 170
- sclk_pcm0 171
- sclk_g3d 172
- sclk_pwm_isp 173 Exynos4x12
- sclk_spi0_isp 174 Exynos4x12
- sclk_spi1_isp 175 Exynos4x12
- sclk_uart_isp 176 Exynos4x12
- sclk_fimg2d 177
-
- [Peripheral Clock Gates]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- fimc0 256
- fimc1 257
- fimc2 258
- fimc3 259
- csis0 260
- csis1 261
- jpeg 262
- smmu_fimc0 263
- smmu_fimc1 264
- smmu_fimc2 265
- smmu_fimc3 266
- smmu_jpeg 267
- vp 268
- mixer 269
- tvenc 270 Exynos4210
- hdmi 271
- smmu_tv 272
- mfc 273
- smmu_mfcl 274
- smmu_mfcr 275
- g3d 276
- g2d 277
- rotator 278 Exynos4210
- mdma 279 Exynos4210
- smmu_g2d 280 Exynos4210
- smmu_rotator 281 Exynos4210
- smmu_mdma 282 Exynos4210
- fimd0 283
- mie0 284
- mdnie0 285 Exynos4412
- dsim0 286
- smmu_fimd0 287
- fimd1 288 Exynos4210
- mie1 289 Exynos4210
- dsim1 290 Exynos4210
- smmu_fimd1 291 Exynos4210
- pdma0 292
- pdma1 293
- pcie_phy 294
- sata_phy 295 Exynos4210
- tsi 296
- sdmmc0 297
- sdmmc1 298
- sdmmc2 299
- sdmmc3 300
- sdmmc4 301
- sata 302 Exynos4210
- sromc 303
- usb_host 304
- usb_device 305
- pcie 306
- onenand 307
- nfcon 308
- smmu_pcie 309
- gps 310
- smmu_gps 311
- uart0 312
- uart1 313
- uart2 314
- uart3 315
- uart4 316
- i2c0 317
- i2c1 318
- i2c2 319
- i2c3 320
- i2c4 321
- i2c5 322
- i2c6 323
- i2c7 324
- i2c_hdmi 325
- tsadc 326
- spi0 327
- spi1 328
- spi2 329
- i2s1 330
- i2s2 331
- pcm0 332
- i2s0 333
- pcm1 334
- pcm2 335
- pwm 336
- slimbus 337
- spdif 338
- ac97 339
- modemif 340
- chipid 341
- sysreg 342
- hdmi_cec 343
- mct 344
- wdt 345
- rtc 346
- keyif 347
- audss 348
- mipi_hsi 349 Exynos4210
- mdma2 350 Exynos4210
- pixelasyncm0 351
- pixelasyncm1 352
- fimc_lite0 353 Exynos4x12
- fimc_lite1 354 Exynos4x12
- ppmuispx 355 Exynos4x12
- ppmuispmx 356 Exynos4x12
- fimc_isp 357 Exynos4x12
- fimc_drc 358 Exynos4x12
- fimc_fd 359 Exynos4x12
- mcuisp 360 Exynos4x12
- gicisp 361 Exynos4x12
- smmu_isp 362 Exynos4x12
- smmu_drc 363 Exynos4x12
- smmu_fd 364 Exynos4x12
- smmu_lite0 365 Exynos4x12
- smmu_lite1 366 Exynos4x12
- mcuctl_isp 367 Exynos4x12
- mpwm_isp 368 Exynos4x12
- i2c0_isp 369 Exynos4x12
- i2c1_isp 370 Exynos4x12
- mtcadc_isp 371 Exynos4x12
- pwm_isp 372 Exynos4x12
- wdt_isp 373 Exynos4x12
- uart_isp 374 Exynos4x12
- asyncaxim 375 Exynos4x12
- smmu_ispcx 376 Exynos4x12
- spi0_isp 377 Exynos4x12
- spi1_isp 378 Exynos4x12
- pwm_isp_sclk 379 Exynos4x12
- spi0_isp_sclk 380 Exynos4x12
- spi1_isp_sclk 381 Exynos4x12
- uart_isp_sclk 382 Exynos4x12
- tmu_apbif 383
-
- [Mux Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- mout_fimc0 384
- mout_fimc1 385
- mout_fimc2 386
- mout_fimc3 387
- mout_cam0 388
- mout_cam1 389
- mout_csis0 390
- mout_csis1 391
- mout_g3d0 392
- mout_g3d1 393
- mout_g3d 394
- aclk400_mcuisp 395 Exynos4x12
-
- [Div Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- div_isp0 450 Exynos4x12
- div_isp1 451 Exynos4x12
- div_mcuisp0 452 Exynos4x12
- div_mcuisp1 453 Exynos4x12
- div_aclk200 454 Exynos4x12
- div_aclk400_mcuisp 455 Exynos4x12
-
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos4.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
@@ -285,6 +38,6 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 314>, <&clock 153>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
index 72ce617..536eacd 100644
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -13,163 +13,12 @@
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- fin_pll 1
-
- [Clock Gate for Special Clocks]
-
- Clock ID
- ----------------------------
-
- sclk_cam_bayer 128
- sclk_cam0 129
- sclk_cam1 130
- sclk_gscl_wa 131
- sclk_gscl_wb 132
- sclk_fimd1 133
- sclk_mipi1 134
- sclk_dp 135
- sclk_hdmi 136
- sclk_pixel 137
- sclk_audio0 138
- sclk_mmc0 139
- sclk_mmc1 140
- sclk_mmc2 141
- sclk_mmc3 142
- sclk_sata 143
- sclk_usb3 144
- sclk_jpeg 145
- sclk_uart0 146
- sclk_uart1 147
- sclk_uart2 148
- sclk_uart3 149
- sclk_pwm 150
- sclk_audio1 151
- sclk_audio2 152
- sclk_spdif 153
- sclk_spi0 154
- sclk_spi1 155
- sclk_spi2 156
- div_i2s1 157
- div_i2s2 158
- sclk_hdmiphy 159
- div_pcm0 160
-
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- gscl0 256
- gscl1 257
- gscl2 258
- gscl3 259
- gscl_wa 260
- gscl_wb 261
- smmu_gscl0 262
- smmu_gscl1 263
- smmu_gscl2 264
- smmu_gscl3 265
- mfc 266
- smmu_mfcl 267
- smmu_mfcr 268
- rotator 269
- jpeg 270
- mdma1 271
- smmu_rotator 272
- smmu_jpeg 273
- smmu_mdma1 274
- pdma0 275
- pdma1 276
- sata 277
- usbotg 278
- mipi_hsi 279
- sdmmc0 280
- sdmmc1 281
- sdmmc2 282
- sdmmc3 283
- sromc 284
- usb2 285
- usb3 286
- sata_phyctrl 287
- sata_phyi2c 288
- uart0 289
- uart1 290
- uart2 291
- uart3 292
- uart4 293
- i2c0 294
- i2c1 295
- i2c2 296
- i2c3 297
- i2c4 298
- i2c5 299
- i2c6 300
- i2c7 301
- i2c_hdmi 302
- adc 303
- spi0 304
- spi1 305
- spi2 306
- i2s1 307
- i2s2 308
- pcm1 309
- pcm2 310
- pwm 311
- spdif 312
- ac97 313
- hsi2c0 314
- hsi2c1 315
- hs12c2 316
- hs12c3 317
- chipid 318
- sysreg 319
- pmu 320
- cmu_top 321
- cmu_core 322
- cmu_mem 323
- tzpc0 324
- tzpc1 325
- tzpc2 326
- tzpc3 327
- tzpc4 328
- tzpc5 329
- tzpc6 330
- tzpc7 331
- tzpc8 332
- tzpc9 333
- hdmi_cec 334
- mct 335
- wdt 336
- rtc 337
- tmu 338
- fimd1 339
- mie1 340
- dsim0 341
- dp 342
- mixer 343
- hdmi 344
- g2d 345
- mdma0 346
- smmu_mdma0 347
-
-
- [Clock Muxes]
-
- Clock ID
- ----------------------------
- mout_hdmi 1024
-
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5250.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
@@ -187,6 +36,6 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 314>, <&clock 153>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
index 458f347..ca88c97 100644
--- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -13,184 +13,12 @@
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- fin_pll 1
-
- [Clock Gate for Special Clocks]
-
- Clock ID
- ----------------------------
- sclk_uart0 128
- sclk_uart1 129
- sclk_uart2 130
- sclk_uart3 131
- sclk_mmc0 132
- sclk_mmc1 133
- sclk_mmc2 134
- sclk_spi0 135
- sclk_spi1 136
- sclk_spi2 137
- sclk_i2s1 138
- sclk_i2s2 139
- sclk_pcm1 140
- sclk_pcm2 141
- sclk_spdif 142
- sclk_hdmi 143
- sclk_pixel 144
- sclk_dp1 145
- sclk_mipi1 146
- sclk_fimd1 147
- sclk_maudio0 148
- sclk_maupcm0 149
- sclk_usbd300 150
- sclk_usbd301 151
- sclk_usbphy300 152
- sclk_usbphy301 153
- sclk_unipro 154
- sclk_pwm 155
- sclk_gscl_wa 156
- sclk_gscl_wb 157
- sclk_hdmiphy 158
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- aclk66_peric 256
- uart0 257
- uart1 258
- uart2 259
- uart3 260
- i2c0 261
- i2c1 262
- i2c2 263
- i2c3 264
- i2c4 265
- i2c5 266
- i2c6 267
- i2c7 268
- i2c_hdmi 269
- tsadc 270
- spi0 271
- spi1 272
- spi2 273
- keyif 274
- i2s1 275
- i2s2 276
- pcm1 277
- pcm2 278
- pwm 279
- spdif 280
- i2c8 281
- i2c9 282
- i2c10 283
- aclk66_psgen 300
- chipid 301
- sysreg 302
- tzpc0 303
- tzpc1 304
- tzpc2 305
- tzpc3 306
- tzpc4 307
- tzpc5 308
- tzpc6 309
- tzpc7 310
- tzpc8 311
- tzpc9 312
- hdmi_cec 313
- seckey 314
- mct 315
- wdt 316
- rtc 317
- tmu 318
- tmu_gpu 319
- pclk66_gpio 330
- aclk200_fsys2 350
- mmc0 351
- mmc1 352
- mmc2 353
- sromc 354
- ufs 355
- aclk200_fsys 360
- tsi 361
- pdma0 362
- pdma1 363
- rtic 364
- usbh20 365
- usbd300 366
- usbd301 377
- aclk400_mscl 380
- mscl0 381
- mscl1 382
- mscl2 383
- smmu_mscl0 384
- smmu_mscl1 385
- smmu_mscl2 386
- aclk333 400
- mfc 401
- smmu_mfcl 402
- smmu_mfcr 403
- aclk200_disp1 410
- dsim1 411
- dp1 412
- hdmi 413
- aclk300_disp1 420
- fimd1 421
- smmu_fimd1 422
- aclk166 430
- mixer 431
- aclk266 440
- rotator 441
- mdma1 442
- smmu_rotator 443
- smmu_mdma1 444
- aclk300_jpeg 450
- jpeg 451
- jpeg2 452
- smmu_jpeg 453
- aclk300_gscl 460
- smmu_gscl0 461
- smmu_gscl1 462
- gscl_wa 463
- gscl_wb 464
- gscl0 465
- gscl1 466
- clk_3aa 467
- aclk266_g2d 470
- sss 471
- slim_sss 472
- mdma0 473
- aclk333_g2d 480
- g2d 481
- aclk333_432_gscl 490
- smmu_3aa 491
- smmu_fimcl0 492
- smmu_fimcl1 493
- smmu_fimcl3 494
- fimc_lite3 495
- aclk_g3d 500
- g3d 501
- smmu_mixer 502
-
- Mux ID
- ----------------------------
-
- mout_hdmi 640
-
- Divider ID
- ----------------------------
-
- dout_pixel 768
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5420.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
@@ -208,6 +36,6 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 259>, <&clock 130>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
index 9955dc9..5f7005f 100644
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -12,45 +12,12 @@
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- xtal 1
- arm_clk 2
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- spi_baud 16
- pb0_250 17
- pr0_250 18
- pr1_250 19
- b_250 20
- b_125 21
- b_200 22
- sata 23
- usb 24
- gmac0 25
- cs250 26
- pb0_250_o 27
- pr0_250_o 28
- pr1_250_o 29
- b_250_o 30
- b_125_o 31
- b_200_o 32
- sata_o 33
- usb_o 34
- gmac0_o 35
- cs250_o 36
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5440.h header and can be used in device
+tree sources.
Example: An example of a clock controller node is listed below.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
new file mode 100644
index 0000000..aee38e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
@@ -0,0 +1,18 @@
+TI-NSPIRE interrupt controller
+
+Required properties:
+- compatible: Compatible property value should be "lsi,zevio-intc".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Example:
+
+interrupt-controller {
+ compatible = "lsi,zevio-intc";
+ interrupt-controller;
+ reg = <0xDC000000 0x1000>;
+ #interrupt-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
index 0a85c70..07ad020 100644
--- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
+++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
@@ -13,6 +13,9 @@
- #address-cells: should be one. The cell is the slot id.
- #size-cells: should be zero.
- at least one slot node
+- clock-names: tuple listing input clock names.
+ Required elements: "mci_clk"
+- clocks: phandles to input clocks.
The node contains child nodes for each slot that the platform uses
@@ -24,6 +27,8 @@
interrupts = <12 4>;
#address-cells = <1>;
#size-cells = <0>;
+ clock-names = "mci_clk";
+ clocks = <&mci0_clk>;
[ child node definitions...]
};
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
index b90bfcd..863d5b81 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
@@ -1,7 +1,8 @@
* Allwinner EMAC ethernet controller
Required properties:
-- compatible: should be "allwinner,sun4i-emac".
+- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
+ "allwinner,sun4i-emac")
- reg: address and length of the register set for the device.
- interrupts: interrupt for the device
- phy: A phandle to a phy node defining the PHY address (as the reg
@@ -14,7 +15,7 @@
Example:
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
index 00b9f9a..4ec5641 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
@@ -1,7 +1,8 @@
* Allwinner A10 MDIO Ethernet Controller interface
Required properties:
-- compatible: should be "allwinner,sun4i-mdio".
+- compatible: should be "allwinner,sun4i-a10-mdio"
+ (Deprecated: "allwinner,sun4i-mdio").
- reg: address and length of the register set for the device.
Optional properties:
@@ -9,7 +10,7 @@
Example at the SoC level:
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/bq2415x.txt b/Documentation/devicetree/bindings/power/bq2415x.txt
new file mode 100644
index 0000000..d0327f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/bq2415x.txt
@@ -0,0 +1,47 @@
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg: integer, i2c address of the device.
+- ti,current-limit: integer, initial maximum current charger can pull
+ from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+ The chip will use slow precharge if battery voltage
+ is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current: integer, maximum charging current in mA.
+- ti,termination-current: integer, charge will be terminated when current in
+ constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense: integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+ (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+ compatible = "ti,bq24150a";
+ reg = <0x6b>;
+
+ ti,current-limit = <100>;
+ ti,weak-battery-voltage = <3400>;
+ ti,battery-regulation-voltage = <4200>;
+ ti,charge-current = <650>;
+ ti,termination-current = <100>;
+ ti,resistor-sense = <68>;
+
+ ti,usb-charger-detection = <&isp1704>;
+};
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 9c5d19a..17c1042 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -13,6 +13,8 @@
Optional properties:
- atmel,use-dma-rx: use of PDC or DMA for receiving data
- atmel,use-dma-tx: use of PDC or DMA for transmitting data
+- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral
+ function pin for the USART RTS feature. If unsure, don't specify this property.
- add dma bindings for dma transfer:
- dmas: DMA specifier, consisting of a phandle to DMA controller node,
memory peripheral interface and USART DMA channel ID, FIFO configuration.
@@ -33,6 +35,7 @@
clock-names = "usart";
atmel,use-dma-rx;
atmel,use-dma-tx;
+ rts-gpios = <&pioD 15 0>;
};
- use DMA:
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 07e04cd..4f8184d 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -5,6 +5,9 @@
- reg: Address and length of the register set for the device
- interrupts: Should contain spi interrupt
- cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+ Required elements: "spi_clk"
+- clocks: phandles to input clocks.
Example:
@@ -14,6 +17,8 @@
interrupts = <13 4 5>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
cs-gpios = <&pioB 3 0>;
status = "okay";
diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt
index 485a9a1..3dc231c 100644
--- a/Documentation/devicetree/bindings/usb/ehci-omap.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -21,7 +21,7 @@
Example for OMAP4:
usbhsehci: ehci@4a064c00 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupts = <0 77 0x4>;
};
diff --git a/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
index 14ab428..ce8c47cff 100644
--- a/Documentation/devicetree/bindings/usb/ohci-omap3.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
@@ -9,7 +9,7 @@
Example for OMAP4:
usbhsohci: ohci@4a064800 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupts = <0 76 0x4>;
};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index c73b435..4685ec3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -8,6 +8,7 @@
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
+allwinner Allwinner Technology Co., Ltd.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amstaos AMS-Taos Inc.
@@ -28,11 +29,13 @@
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
denx Denx Software Engineering
+dmo Data Modul AG
edt Emerging Display Technologies
emmicro EM Microelectronic
epfl Ecole Polytechnique Fédérale de Lausanne
epson Seiko Epson Corp.
est ESTeem Wireless Modems
+eukrea Eukréa Electromatique
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
@@ -40,6 +43,7 @@
gumstix Gumstix, Inc.
haoyu Haoyu Microelectronic Co. Ltd.
hisilicon Hisilicon Limited.
+honeywell Honeywell
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
@@ -55,6 +59,7 @@
microchip Microchip Technology Inc.
mosaixtech Mosaix Technologies, Inc.
national National Semiconductor
+neonode Neonode Inc.
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
@@ -64,7 +69,7 @@
picochip Picochip Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
-qcom Qualcomm, Inc.
+qcom Qualcomm Technologies, Inc
qnap QNAP Systems, Inc.
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
@@ -81,6 +86,7 @@
sii Seiko Instruments, Inc.
sirf SiRF Technology, Inc.
snps Synopsys, Inc.
+spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
@@ -91,6 +97,7 @@
toumaz Toumaz
v3 V3 Semiconductor
via VIA Technologies, Inc.
+voipac Voipac Technologies s.r.o.
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt
index 47c3009..731a009 100644
--- a/Documentation/dvb/contributors.txt
+++ b/Documentation/dvb/contributors.txt
@@ -78,7 +78,7 @@
Wilson Michaels <wilsonmichaels@earthlink.net>
for the lgdt330x frontend driver, and various bugfixes
-Michael Krufky <mkrufky@m1k.net>
+Michael Krufky <mkrufky@linuxtv.org>
for maintaining v4l/dvb inter-tree dependencies
Taylor Jacob <rtjacob@earthlink.net>
diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX
index 30a7054..fe85e7c 100644
--- a/Documentation/fb/00-INDEX
+++ b/Documentation/fb/00-INDEX
@@ -5,6 +5,8 @@
00-INDEX
- this file.
+api.txt
+ - The frame buffer API between applications and buffer devices.
arkfb.txt
- info on the fbdev driver for ARK Logic chips.
aty128fb.txt
@@ -51,12 +53,16 @@
- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
sisfb.txt
- info on the framebuffer device driver for various SiS chips.
+sm501.txt
+ - info on the framebuffer device driver for sm501 videoframebuffer.
sstfb.txt
- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
tgafb.txt
- info on the TGA (DECChip 21030) frame buffer driver.
tridentfb.txt
info on the framebuffer driver for some Trident chip based cards.
+udlfb.txt
+ - Driver for DisplayLink USB 2.0 chips.
uvesafb.txt
- info on the userspace VESA (VBE2+ compliant) frame buffer device.
vesafb.txt
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 632211c..ac28149 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -2,6 +2,8 @@
- this file (info on some of the filesystems supported by linux).
Locking
- info on locking rules as they pertain to Linux VFS.
+Makefile
+ - Makefile for building the filsystems-part of DocBook.
9p.txt
- 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
adfs.txt
diff --git a/Documentation/filesystems/nfs/00-INDEX b/Documentation/filesystems/nfs/00-INDEX
index 66eb6c8..53f3b59 100644
--- a/Documentation/filesystems/nfs/00-INDEX
+++ b/Documentation/filesystems/nfs/00-INDEX
@@ -12,6 +12,8 @@
- info on the Linux server implementation of NFSv4 minor version 1.
nfs-rdma.txt
- how to install and setup the Linux NFS/RDMA client and server software
+nfsd-admin-interfaces.txt
+ - Administrative interfaces for nfsd.
nfsroot.txt
- short guide on setting up a diskless box with NFS root filesystem.
pnfs.txt
@@ -20,5 +22,5 @@
- introduction to the caching mechanisms in the sunrpc layer.
idmapper.txt
- information for configuring request-keys to be used by idmapper
-knfsd-rpcgss.txt
+rpc-server-gss.txt
- Information on GSS authentication support in the NFS Server
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index c70e7a7..0d85ac19 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -8,8 +8,8 @@
several ways to achieve this, depending on the context and requirements.
-Method 1: Declare the I2C devices by bus number
------------------------------------------------
+Method 1a: Declare the I2C devices by bus number
+------------------------------------------------
This method is appropriate when the I2C bus is a system bus as is the case
for many embedded systems. On such systems, each I2C bus has a number
@@ -51,6 +51,43 @@
they sit on goes away (if ever.)
+Method 1b: Declare the I2C devices via devicetree
+-------------------------------------------------
+
+This method has the same implications as method 1a. The declaration of I2C
+devices is here done via devicetree as subnodes of the master controller.
+
+Example:
+
+ i2c1: i2c@400a0000 {
+ /* ... master properties skipped ... */
+ clock-frequency = <100000>;
+
+ flash@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ pca9532: gpio@60 {
+ compatible = "nxp,pca9532";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x60>;
+ };
+ };
+
+Here, two devices are attached to the bus using a speed of 100kHz. For
+additional properties which might be needed to set up the device, please refer
+to its devicetree documentation in Documentation/devicetree/bindings/.
+
+
+Method 1c: Declare the I2C devices via ACPI
+-------------------------------------------
+
+ACPI can also describe I2C devices. There is special documentation for this
+which is currently located at Documentation/acpi/enumeration.txt.
+
+
Method 2: Instantiate the devices explicitly
--------------------------------------------
diff --git a/Documentation/ide/00-INDEX b/Documentation/ide/00-INDEX
index d6b7788..22f98ca 100644
--- a/Documentation/ide/00-INDEX
+++ b/Documentation/ide/00-INDEX
@@ -10,3 +10,5 @@
- info on the IDE ATAPI streaming tape driver
ide.txt
- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
+warm-plug-howto.txt
+ - using sysfs to remove and add IDE devices.
\ No newline at end of file
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8f441da..7116fda 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1726,16 +1726,16 @@
option description.
memmap=nn[KMG]@ss[KMG]
- [KNL] Force usage of a specific region of memory
- Region of memory to be used, from ss to ss+nn.
+ [KNL] Force usage of a specific region of memory.
+ Region of memory to be used is from ss to ss+nn.
memmap=nn[KMG]#ss[KMG]
[KNL,ACPI] Mark specific memory as ACPI data.
- Region of memory to be used, from ss to ss+nn.
+ Region of memory to be marked is from ss to ss+nn.
memmap=nn[KMG]$ss[KMG]
[KNL,ACPI] Mark specific memory as reserved.
- Region of memory to be used, from ss to ss+nn.
+ Region of memory to be reserved is from ss to ss+nn.
Example: Exclude memory from 0x18690000-0x1869ffff
memmap=64K$0x18690000
or
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index fa68853..d13b9a9 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -1,13 +1,15 @@
00-INDEX
- This file
-acer-wmi.txt
- - information on the Acer Laptop WMI Extras driver.
+Makefile
+ - Makefile for building dslm example program.
asus-laptop.txt
- information on the Asus Laptop Extras driver.
disk-shock-protection.txt
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
+hpfall.c
+ - (HP) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt
diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
index 1ecd159..b4ef1f3 100644
--- a/Documentation/leds/00-INDEX
+++ b/Documentation/leds/00-INDEX
@@ -1,3 +1,7 @@
+00-INDEX
+ - This file
+leds-blinkm.txt
+ - Driver for BlinkM LED-devices.
leds-class.txt
- documents LED handling under Linux.
leds-lp3944.txt
@@ -12,3 +16,7 @@
- description about lp55xx common driver.
leds-lm3556.txt
- notes on how to use the leds-lm3556 driver.
+ledtrig-oneshot.txt
+ - One-shot LED trigger for both sporadic and dense events.
+ledtrig-transient.txt
+ - LED Transient Trigger, one shot timer activation.
diff --git a/Documentation/m68k/00-INDEX b/Documentation/m68k/00-INDEX
index a014e9f..2be8c6b 100644
--- a/Documentation/m68k/00-INDEX
+++ b/Documentation/m68k/00-INDEX
@@ -1,5 +1,7 @@
00-INDEX
- this file
+README.buddha
+ - Amiga Buddha and Catweasel IDE Driver
kernel-options.txt
- command line options for Linux/m68k
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index f11580f..557b6ef 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -6,8 +6,14 @@
- information on the 3Com Etherlink III Series Ethernet cards.
6pack.txt
- info on the 6pack protocol, an alternative to KISS for AX.25
-DLINK.txt
- - info on the D-Link DE-600/DE-620 parallel port pocket adapters
+LICENSE.qla3xxx
+ - GPLv2 for QLogic Linux Networking HBA Driver
+LICENSE.qlge
+ - GPLv2 for QLogic Linux qlge NIC Driver
+LICENSE.qlcnic
+ - GPLv2 for QLogic Linux qlcnic NIC Driver
+Makefile
+ - Makefile for docsrc.
PLIP.txt
- PLIP: The Parallel Line Internet Protocol device driver
README.ipw2100
@@ -17,7 +23,7 @@
README.sb1000
- info on General Instrument/NextLevel SURFboard1000 cable modem.
alias.txt
- - info on using alias network devices
+ - info on using alias network devices.
arcnet-hardware.txt
- tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
arcnet.txt
@@ -80,7 +86,7 @@
- info on using Frame Relay/Data Link Connection Identifier (DLCI).
gen_stats.txt
- Generic networking statistics for netlink users.
-generic_hdlc.txt
+generic-hdlc.txt
- The generic High Level Data Link Control (HDLC) layer.
generic_netlink.txt
- info on Generic Netlink
@@ -88,6 +94,8 @@
- Gianfar Ethernet Driver.
i40e.txt
- README for the Intel Ethernet Controller XL710 Driver (i40e).
+i40evf.txt
+ - Short note on the Driver for the Intel(R) XL710 X710 Virtual Function
ieee802154.txt
- Linux IEEE 802.15.4 implementation, API and drivers
igb.txt
@@ -102,6 +110,8 @@
- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
iphase.txt
- Interphase PCI ATM (i)Chip IA Linux driver info.
+ipsec.txt
+ - Note on not compressing IPSec payload and resulting failed policy check.
ipv6.txt
- Options to the ipv6 kernel module.
ipvs-sysctl.txt
@@ -120,6 +130,8 @@
- programming information of the LAPB module.
ltpc.txt
- the Apple or Farallon LocalTalk PC card driver
+mac80211-auth-assoc-deauth.txt
+ - authentication and association / deauth-disassoc with max80211
mac80211-injection.txt
- HOWTO use packet injection with mac80211
multiqueue.txt
@@ -134,6 +146,10 @@
- info on network device driver functions exported to the kernel.
netif-msg.txt
- Design of the network interface message level setting (NETIF_MSG_*).
+netlink_mmap.txt
+ - memory mapped I/O with netlink
+nf_conntrack-sysctl.txt
+ - list of netfilter-sysctl knobs.
nfc.txt
- The Linux Near Field Communication (NFS) subsystem.
openvswitch.txt
@@ -176,7 +192,7 @@
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt
- the driver for SMC's 9000 series of Ethernet cards
-spider-net.txt
+spider_net.txt
- README for the Spidernet Driver (as found in PS3 / Cell BE).
stmmac.txt
- README for the STMicro Synopsys Ethernet driver.
@@ -188,6 +204,8 @@
- short blurb on how TCP output takes place.
tcp-thin.txt
- kernel tuning options for low rate 'thin' TCP streams.
+team.txt
+ - pointer to information for ethernet teaming devices.
tlan.txt
- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
tproxy.txt
@@ -200,6 +218,8 @@
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
vxge.txt
- README for the Neterion X3100 PCIe Server Adapter.
+vxlan.txt
+ - Virtual extensible LAN overview
x25.txt
- general info on X.25 development.
x25-iface.txt
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 0103e4b..ebff6ee 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -75,14 +75,26 @@
it. This framework provides the following APIs to get a reference to the PHY.
struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
struct phy *devm_phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
-phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
-the string arguments should contain the phy name as given in the dt data and
-in the case of non-dt boot, it should contain the label of the PHY.
-The only difference between the two APIs is that devm_phy_get associates the
-device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
+be used to get the PHY. In the case of dt boot, the string arguments
+should contain the phy name as given in the dt data and in the case of
+non-dt boot, it should contain the label of the PHY. The two
+devm_phy_get associates the device with the PHY using devres on
+successful PHY get. On driver detach, release function is invoked on
+the the devres data and devres data is freed. phy_optional_get and
+devm_phy_optional_get should be used when the phy is optional. These
+two functions will never return -ENODEV, but instead returns NULL when
+the phy cannot be found.
+
+It should be noted that NULL is a valid phy reference. All phy
+consumer calls on the NULL phy become NOPs. That is the release calls,
+the phy_init() and phy_exit() calls, and phy_power_on() and
+phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
+phy is useful in devices for handling optional phy devices.
5. Releasing a reference to the PHY
diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX
index a4d682f..ad04cc8 100644
--- a/Documentation/power/00-INDEX
+++ b/Documentation/power/00-INDEX
@@ -4,6 +4,8 @@
- basic info about the APM and ACPI support.
basic-pm-debugging.txt
- Debugging suspend and resume
+charger-manager.txt
+ - Battery charger management.
devices.txt
- How drivers interact with system-wide power management
drivers-testing.txt
@@ -22,6 +24,8 @@
- info on Linux PM Quality of Service interface
power_supply_class.txt
- Tells userspace about battery, UPS, AC or DC power supply properties
+runtime_pm.txt
+ - Power management framework for I/O devices.
s2ram.txt
- How to get suspend to ram working (and debug it when it isn't)
states.txt
@@ -38,7 +42,5 @@
- How to trick software suspend (to disk) into working when it isn't
userland-swsusp.txt
- Experimental implementation of software suspend in userspace
-video_extension.txt
- - ACPI video extensions
video.txt
- Video issues during resume from suspend
diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c
index a74d0a8..4aba043 100644
--- a/Documentation/ptp/testptp.c
+++ b/Documentation/ptp/testptp.c
@@ -117,6 +117,7 @@
" -f val adjust the ptp clock frequency by 'val' ppb\n"
" -g get the ptp clock time\n"
" -h prints this message\n"
+ " -i val index for event/trigger\n"
" -k val measure the time offset between system and phc clock\n"
" for 'val' times (Maximum 25)\n"
" -p val enable output with a period of 'val' nanoseconds\n"
@@ -154,6 +155,7 @@
int capabilities = 0;
int extts = 0;
int gettime = 0;
+ int index = 0;
int oneshot = 0;
int pct_offset = 0;
int n_samples = 0;
@@ -167,7 +169,7 @@
progname = strrchr(argv[0], '/');
progname = progname ? 1+progname : argv[0];
- while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghk:p:P:sSt:v"))) {
+ while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghi:k:p:P:sSt:v"))) {
switch (c) {
case 'a':
oneshot = atoi(optarg);
@@ -190,6 +192,9 @@
case 'g':
gettime = 1;
break;
+ case 'i':
+ index = atoi(optarg);
+ break;
case 'k':
pct_offset = 1;
n_samples = atoi(optarg);
@@ -301,7 +306,7 @@
if (extts) {
memset(&extts_request, 0, sizeof(extts_request));
- extts_request.index = 0;
+ extts_request.index = index;
extts_request.flags = PTP_ENABLE_FEATURE;
if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) {
perror("PTP_EXTTS_REQUEST");
@@ -375,7 +380,7 @@
return -1;
}
memset(&perout_request, 0, sizeof(perout_request));
- perout_request.index = 0;
+ perout_request.index = index;
perout_request.start.sec = ts.tv_sec + 2;
perout_request.start.nsec = 0;
perout_request.period.sec = 0;
diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX
index 3a2b963..10c874e 100644
--- a/Documentation/s390/00-INDEX
+++ b/Documentation/s390/00-INDEX
@@ -16,11 +16,13 @@
- hints for debugging on s390 systems.
driver-model.txt
- information on s390 devices and the driver model.
+kvm.txt
+ - ioctl calls to /dev/kvm on s390.
monreader.txt
- information on accessing the z/VM monitor stream from Linux.
+qeth.txt
+ - HiperSockets Bridge Port Support.
s390dbf.txt
- information on using the s390 debug feature.
-TAPE
- - information on the driver for channel-attached tapes.
-zfcpdump
+zfcpdump.txt
- information on the s390 SCSI dump tool.
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX
index 46702e4..eccf7ad 100644
--- a/Documentation/scheduler/00-INDEX
+++ b/Documentation/scheduler/00-INDEX
@@ -2,6 +2,8 @@
- this file.
sched-arch.txt
- CPU Scheduler implementation hints for architecture specific code.
+sched-bwc.txt
+ - CFS bandwidth control overview.
sched-design-CFS.txt
- goals, design and implementation of the Completely Fair Scheduler.
sched-domains.txt
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX
index 2044be5..c4b978a 100644
--- a/Documentation/scsi/00-INDEX
+++ b/Documentation/scsi/00-INDEX
@@ -36,6 +36,8 @@
- info on WorkBiT NinjaSCSI-32/32Bi driver
aacraid.txt
- Driver supporting Adaptec RAID controllers
+advansys.txt
+ - List of Advansys Host Adapters
aha152x.txt
- info on driver for Adaptec AHA152x based adapters
aic79xx.txt
@@ -44,6 +46,12 @@
- info on driver for Adaptec controllers
arcmsr_spec.txt
- ARECA FIRMWARE SPEC (for IOP331 adapter)
+bfa.txt
+ - Brocade FC/FCOE adapter driver.
+bnx2fc.txt
+ - FCoE hardware offload for Broadcom network interfaces.
+cxgb3i.txt
+ - Chelsio iSCSI Linux Driver
dc395x.txt
- README file for the dc395x SCSI driver
dpti.txt
@@ -52,18 +60,24 @@
- info on driver for DTC 2x80 based adapters
g_NCR5380.txt
- info on driver for NCR5380 and NCR53c400 based adapters
+hpsa.txt
+ - HP Smart Array Controller SCSI driver.
hptiop.txt
- HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
in2000.txt
- info on in2000 driver
libsas.txt
- Serial Attached SCSI management layer.
+link_power_management_policy.txt
+ - Link power management options.
lpfc.txt
- LPFC driver release notes
megaraid.txt
- Common Management Module, shared code handling ioctls for LSI drivers
ncr53c8xx.txt
- info on driver for NCR53c8xx based adapters
+osd.txt
+ Object-Based Storage Device, command set introduction.
osst.txt
- info on driver for OnStream SC-x0 SCSI tape
ppa.txt
@@ -74,6 +88,8 @@
- README for the SCSI media changer driver
scsi-generic.txt
- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
+scsi-parameters.txt
+ - List of SCSI-parameters to pass to the kernel at module load-time.
scsi.txt
- short blurb on using SCSI support as a module.
scsi_mid_low_api.txt
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
index 1f1b22f..f9c6b5e 100644
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@@ -4,10 +4,12 @@
- info on Cyclades-Z firmware loading.
digiepca.txt
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
-hayes-esp.txt
- - info on using the Hayes ESP serial driver.
+driver
+ - intro to the low level serial driver.
moxa-smartio
- file with info on installing/using Moxa multiport serial driver.
+n_gsm.txt
+ - GSM 0710 tty multiplexer howto.
riscom8.txt
- notes on using the RISCom/8 multi-port serial driver.
rocket.txt
diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX
new file mode 100644
index 0000000..a128fa8
--- /dev/null
+++ b/Documentation/spi/00-INDEX
@@ -0,0 +1,22 @@
+00-INDEX
+ - this file.
+Makefile
+ - Makefile for the example sourcefiles.
+butterfly
+ - AVR Butterfly SPI driver overview and pin configuration.
+ep93xx_spi
+ - Basic EP93xx SPI driver configuration.
+pxa2xx
+ - PXA2xx SPI master controller build by spi_message fifo wq
+spidev
+ - Intro to the userspace API for spi devices
+spidev_fdx.c
+ - spidev example file
+spi-lm70llp
+ - Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
+spi-sc18is602
+ - NXP SC18IS602/603 I2C-bus to SPI bridge
+spi-summary
+ - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
+spidev_test.c
+ - SPI testing utility.
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index f72e0d1..7982bcc 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -543,7 +543,22 @@
queuing transfers that arrive in the meantime. When the driver is
finished with this message, it must call
spi_finalize_current_message() so the subsystem can issue the next
- transfer. This may sleep.
+ message. This may sleep.
+
+ master->transfer_one(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *transfer)
+ The subsystem calls the driver to transfer a single transfer while
+ queuing transfers that arrive in the meantime. When the driver is
+ finished with this transfer, it must call
+ spi_finalize_current_transfer() so the subsystem can issue the next
+ transfer. This may sleep. Note: transfer_one and transfer_one_message
+ are mutually exclusive; when both are set, the generic subsystem does
+ not call your transfer_one callback.
+
+ Return values:
+ negative errno: error
+ 0: transfer is finished
+ 1: transfer is still in progress
DEPRECATED METHODS
diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX
index ef2ccbf..6d042dc 100644
--- a/Documentation/timers/00-INDEX
+++ b/Documentation/timers/00-INDEX
@@ -8,6 +8,8 @@
- sample hpet timer test program
hrtimers.txt
- subsystem for high-resolution kernel timers
+Makefile
+ - Build and link hpet_example
NO_HZ.txt
- Summary of the different methods for the scheduler clock-interrupts management.
timers-howto.txt
diff --git a/Documentation/virtual/kvm/00-INDEX b/Documentation/virtual/kvm/00-INDEX
index 641ec92..fee9f2b 100644
--- a/Documentation/virtual/kvm/00-INDEX
+++ b/Documentation/virtual/kvm/00-INDEX
@@ -20,5 +20,7 @@
- the paravirtualization interface on PowerPC.
review-checklist.txt
- review checklist for KVM patches.
+s390-diag.txt
+ - Diagnose hypercall description (for IBM S/390)
timekeeping.txt
- timekeeping virtualization for x86-based architectures.
diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
index a39d066..081c497 100644
--- a/Documentation/vm/00-INDEX
+++ b/Documentation/vm/00-INDEX
@@ -16,8 +16,6 @@
- explains what hwpoison is
ksm.txt
- how to use the Kernel Samepage Merging feature.
-locking
- - info on how locking and synchronization is done in the Linux vm code.
numa
- information about NUMA specific code in the Linux vm.
numa_memory_policy.txt
@@ -32,6 +30,8 @@
- a short users guide for SLUB.
soft-dirty.txt
- short explanation for soft-dirty PTEs
+split_page_table_lock
+ - Separate per-table lock to improve scalability of the old page_table_lock.
transhuge.txt
- Transparent Hugepage Support, alternative way of using hugepages.
unevictable-lru.txt
diff --git a/Documentation/w1/masters/00-INDEX b/Documentation/w1/masters/00-INDEX
index d63fa02..8330cf9 100644
--- a/Documentation/w1/masters/00-INDEX
+++ b/Documentation/w1/masters/00-INDEX
@@ -4,7 +4,9 @@
- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
ds2490
- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
-mxc_w1
+mxc-w1
- W1 master controller driver found on Freescale MX2/MX3 SoCs
+omap-hdq
+ - HDQ/1-wire module of TI OMAP 2430/3430.
w1-gpio
- GPIO 1-wire bus master driver.
diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX
index 75613c9..6e18c70 100644
--- a/Documentation/w1/slaves/00-INDEX
+++ b/Documentation/w1/slaves/00-INDEX
@@ -4,3 +4,5 @@
- The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
w1_ds2423
- The Maxim/Dallas Semiconductor ds2423 counter device.
+w1_ds28e04
+ - The Maxim/Dallas Semiconductor ds28e04 eeprom.
diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX
index f37b46d..6922644 100644
--- a/Documentation/x86/00-INDEX
+++ b/Documentation/x86/00-INDEX
@@ -1,6 +1,20 @@
00-INDEX
- this file
-mtrr.txt
- - how to use x86 Memory Type Range Registers to increase performance
+boot.txt
+ - List of boot protocol versions
+early-microcode.txt
+ - How to load microcode from an initrd-CPIO archive early to fix CPU issues.
+earlyprintk.txt
+ - Using earlyprintk with a USB2 debug port key.
+entry_64.txt
+ - Describe (some of the) kernel entry points for x86.
exception-tables.txt
- why and how Linux kernel uses exception tables on x86
+mtrr.txt
+ - how to use x86 Memory Type Range Registers to increase performance
+pat.txt
+ - Page Attribute Table intro and API
+usb-legacy-support.txt
+ - how to fix/avoid quirks when using emulated PS/2 mouse/keyboard.
+zero-page.txt
+ - layout of the first page of memory.
diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt
index 28fa325..6f6d956 100644
--- a/Documentation/zh_CN/arm64/booting.txt
+++ b/Documentation/zh_CN/arm64/booting.txt
@@ -7,7 +7,7 @@
or if there is a problem with the translation.
Maintainer: Will Deacon <will.deacon@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
---------------------------------------------------------------------
Documentation/arm64/booting.txt 的中文翻译
@@ -16,9 +16,9 @@
译存在问题，请联系中文版维护者。
英文版维护者： Will Deacon <will.deacon@arm.com>
-中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜 Fu Wei <wefu@redhat.com>
以下为正文
---------------------------------------------------------------------
@@ -64,8 +64,8 @@
必要性: 强制
-设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个
-512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+设备树数据块（dtb）必须 8 字节对齐，并位于从内核映像起始算起第一个 512MB
+内，且不得跨越 2MB 对齐边界。这使得内核可以通过初始页表中的单个节描述符来
映射此数据块。
@@ -84,13 +84,23 @@
必要性: 强制
-已解压的内核映像包含一个 32 字节的头，内容如下：
+已解压的内核映像包含一个 64 字节的头，内容如下：
- u32 magic = 0x14000008; /* 跳转到 stext, 小端 */
- u32 res0 = 0; /* 保留 */
+ u32 code0; /* 可执行代码 */
+ u32 code1; /* 可执行代码 */
u64 text_offset; /* 映像装载偏移 */
+ u64 res0 = 0; /* 保留 */
u64 res1 = 0; /* 保留 */
u64 res2 = 0; /* 保留 */
+ u64 res3 = 0; /* 保留 */
+ u64 res4 = 0; /* 保留 */
+ u32 magic = 0x644d5241; /* 魔数, 小端, "ARM\x64" */
+ u32 res5 = 0; /* 保留 */
+
+
+映像头注释：
+
+- code0/code1 负责跳转到 stext.
映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM
的起始地址必须是以 2MB 对齐的。
@@ -118,9 +128,9 @@
外部高速缓存（如果存在）必须配置并禁用。
- 架构计时器
- CNTFRQ 必须设定为计时器的频率。
- 如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
- 必须置位。
+ CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU
+ 都一致的值。如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的
+ EL1PCTEN (bit 0) 必须置位。
- 一致性
通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
@@ -131,23 +141,40 @@
在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
+以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
+必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
+
引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
- 数据块必须在每个 CPU 节点中包含以下内容：
-
- 1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。
-
- 2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+ 数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性，所
+ 支持的 enable-method 请见下文。
引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
数据块。
-- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
+- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
+ 节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
+ 64 位自然对齐且初始化为零的内存位置。
+
+ 这些 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
- 时，CPU 必须直接跳入此值所指向的地址。
+ 时，CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值，
+ 因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
+
+- enable-method 为 “psci” 的 CPU 保持在内核外（比如，在
+ memory 节点中描述为内核空间的内存区外，或在通过设备树 /memreserve/
+ 域中描述为内核保留区的空间中）。内核将会发起在 ARM 文档（编号
+ ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的
+ CPU_ON 调用来将 CPU 带入内核。
+
+ *译者注:到文档翻译时，此文档已更新为 ARM DEN 0022B。
+
+ 设备树必须包含一个 ‘psci’ 节点，请参考以下文档：
+ Documentation/devicetree/bindings/arm/psci.txt
+
- 辅助 CPU 通用寄存器设置
x0 = 0 (保留，将来可能使用)
diff --git a/Documentation/zh_CN/arm64/memory.txt b/Documentation/zh_CN/arm64/memory.txt
index a5f6283..a782704 100644
--- a/Documentation/zh_CN/arm64/memory.txt
+++ b/Documentation/zh_CN/arm64/memory.txt
@@ -7,7 +7,7 @@
or if there is a problem with the translation.
Maintainer: Catalin Marinas <catalin.marinas@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
---------------------------------------------------------------------
Documentation/arm64/memory.txt 的中文翻译
@@ -16,9 +16,9 @@
译存在问题，请联系中文版维护者。
英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
-中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜 Fu Wei <wefu@redhat.com>
以下为正文
---------------------------------------------------------------------
@@ -41,7 +41,7 @@
TTBR1 中，且从不写入 TTBR0。
-AArch64 Linux 内存布局：
+AArch64 Linux 在页大小为 4KB 时的内存布局：
起始地址 结束地址 大小 用途
-----------------------------------------------------------------------
@@ -55,15 +55,42 @@
ffffffbe00000000 ffffffbffbbfffff ~8GB [防护页，未来用于 vmmemap]
+ffffffbffbc00000 ffffffbffbdfffff 2MB earlyprintk 设备
+
ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O 空间
-ffffffbbffff0000 ffffffbcffffffff ~2MB [防护页]
+ffffffbffbe10000 ffffffbcffffffff ~2MB [防护页]
ffffffbffc000000 ffffffbfffffffff 64MB 模块
ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射
+AArch64 Linux 在页大小为 64KB 时的内存布局：
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000000000000000 000003ffffffffff 4TB 用户空间
+
+fffffc0000000000 fffffdfbfffeffff ~2TB vmalloc
+
+fffffdfbffff0000 fffffdfbffffffff 64KB [防护页]
+
+fffffdfc00000000 fffffdfdffffffff 8GB vmemmap
+
+fffffdfe00000000 fffffdfffbbfffff ~8GB [防护页，未来用于 vmmemap]
+
+fffffdfffbc00000 fffffdfffbdfffff 2MB earlyprintk 设备
+
+fffffdfffbe00000 fffffdfffbe0ffff 64KB PCI I/O 空间
+
+fffffdfffbe10000 fffffdfffbffffff ~2MB [防护页]
+
+fffffdfffc000000 fffffdffffffffff 64MB 模块
+
+fffffe0000000000 ffffffffffffffff 2TB 内核逻辑内存映射
+
+
4KB 页大小的转换表查找：
+--------+--------+--------+--------+--------+--------+--------+--------+
@@ -91,3 +118,10 @@
| | +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
| +-------------------------------> [47:42] L1 索引 (未使用)
+-------------------------------------------------> [63] TTBR0/1
+
+当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的
+一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）:
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000004000000000 0000007fffffffff 256GB 在 HYP 中映射的内核对象
diff --git a/Documentation/zh_CN/arm64/tagged-pointers.txt b/Documentation/zh_CN/arm64/tagged-pointers.txt
new file mode 100644
index 0000000..2664d1b
--- /dev/null
+++ b/Documentation/zh_CN/arm64/tagged-pointers.txt
@@ -0,0 +1,52 @@
+Chinese translated version of Documentation/arm64/tagged-pointers.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arm64/tagged-pointers.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜 Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+ Linux 在 AArch64 中带标记的虚拟地址
+ =================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
+AArch64 Linux 中的潜在用途。
+
+内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换（即用户空间
+映射），其虚拟地址的最高 8 位（63:56）会被转换硬件所忽略。这种机制
+让这些位可供应用程序自由使用，其注意事项如下：
+
+ (1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
+ 这意味着任何携带用户空间虚拟地址的系统调用（syscall）
+ 参数 *必须* 在陷入内核前使它们的最高字节被清零。
+
+ (2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
+ 标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
+ 地址所携带的包含其内部域信息的标记。此规则的一个例外是
+ 当信号是在调试观察点的异常处理程序中产生的，此时标记的
+ 信息将被保存。
+
+ (3) 当使用带标记的指针时需特别留心，因为仅对两个虚拟地址
+ 的高字节，C 编译器很可能无法判断它们是不同的。
+
+此构架会阻止对带标记的 PC 指针的利用，因此在异常返回时，其高字节
+将被设置成一个为 “55” 的扩展符。
diff --git a/MAINTAINERS b/MAINTAINERS
index b2cf5cf..9dbf7f1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1167,6 +1167,14 @@
W: http://www.arm.linux.org.uk/
S: Maintained
+ARM/QUALCOMM SUPPORT
+M: Kumar Gala <galak@codeaurora.org>
+M: David Brown <davidb@codeaurora.org>
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: arch/arm/mach-qcom/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
+
ARM/RADISYS ENP2611 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2367,7 +2375,7 @@
CPU FREQUENCY DRIVERS - ARM BIG LITTLE
M: Viresh Kumar <viresh.kumar@linaro.org>
-M: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+M: Sudeep Holla <sudeep.holla@arm.com>
L: cpufreq@vger.kernel.org
L: linux-pm@vger.kernel.org
W: http://www.arm.com/products/processors/technologies/biglittleprocessing.php
@@ -2857,7 +2865,7 @@
L: intel-gfx@lists.freedesktop.org
L: dri-devel@lists.freedesktop.org
Q: http://patchwork.freedesktop.org/project/intel-gfx/
-T: git git://people.freedesktop.org/~danvet/drm-intel
+T: git git://anongit.freedesktop.org/drm-intel
S: Supported
F: drivers/gpu/drm/i915/
F: include/drm/i915*
@@ -7196,7 +7204,7 @@
F: drivers/net/ethernet/rdc/r6040.c
RDS - RELIABLE DATAGRAM SOCKETS
-M: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
+M: Chien Yen <chien.yen@oracle.com>
L: rds-devel@oss.oracle.com (moderated for non-subscribers)
S: Supported
F: net/rds/
diff --git a/Makefile b/Makefile
index 606ef7c..893d6f0 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 14
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e254198..df9266d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -421,9 +421,6 @@
depends on !MMU
select ARCH_REQUIRE_GPIOLIB
select ARM_NVIC
- # CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
- # i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
- select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
select CPU_V7M
@@ -657,9 +654,8 @@
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MSM_NODT
- bool "Qualcomm MSM"
- select ARCH_MSM
+config ARCH_MSM
+ bool "Qualcomm MSM (non-multiplatform)"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
@@ -898,7 +894,7 @@
bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
depends on !ARCH_MULTI_V6_V7
select ARCH_MULTI_V4_V5
- select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \
+ select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
@@ -1005,6 +1001,8 @@
source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-qcom/Kconfig"
+
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0531da8..4491c7b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -956,7 +956,7 @@
config DEBUG_MSM_UART
bool
- depends on ARCH_MSM
+ depends on ARCH_MSM || ARCH_QCOM
config DEBUG_LL_INCLUDE
string
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 08a9ef5..51e5bed 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -180,6 +180,7 @@
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
+machine-$(CONFIG_ARCH_QCOM) += qcom
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 52c501b..9dfc2d4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -38,6 +38,7 @@
dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
# sama5d3
+dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
@@ -46,19 +47,14 @@
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
- bcm28155-ap.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
da850-evm.dtb
-dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
- dove-cubox.dtb \
- dove-d2plug.dtb \
- dove-d3plug.dtb \
- dove-dove-db.dtb
dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
@@ -81,8 +77,8 @@
ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-b3.dtb \
+kirkwood := \
+ kirkwood-b3.dtb \
kirkwood-cloudbox.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
@@ -138,56 +134,60 @@
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-apq8074-dragonboard.dtb
-dtb-$(CONFIG_MACH_ARMADA_370) += \
- armada-370-db.dtb \
- armada-370-mirabox.dtb \
- armada-370-netgear-rn102.dtb \
- armada-370-netgear-rn104.dtb \
- armada-370-rd.dtb
-dtb-$(CONFIG_MACH_ARMADA_375) += \
- armada-375-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-db.dtb \
- armada-385-rd.dtb
-dtb-$(CONFIG_MACH_ARMADA_XP) += \
- armada-xp-axpwifiap.dtb \
- armada-xp-db.dtb \
- armada-xp-gp.dtb \
- armada-xp-netgear-rn2120.dtb \
- armada-xp-matrix.dtb \
- armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_ARCH_MXC) += \
+ imx25-eukrea-mbimxsd25-baseboard.dtb \
imx25-karo-tx25.dtb \
imx25-pdk.dtb \
imx27-apf27.dtb \
imx27-apf27dev.dtb \
imx27-pdk.dtb \
- imx27-phytec-phycore-som.dtb \
imx27-phytec-phycore-rdk.dtb \
- imx27-phytec-phycard-s-som.dtb \
imx27-phytec-phycard-s-rdk.dtb \
imx31-bug.dtb \
+ imx35-eukrea-mbimxsd35-baseboard.dtb \
+ imx50-evk.dtb \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
imx51-babbage.dtb \
+ imx51-eukrea-mbimxsd51-baseboard.dtb \
imx53-ard.dtb \
- imx53-evk.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
imx53-qsb.dtb \
+ imx53-qsrb.dtb \
imx53-smd.dtb \
+ imx53-tx53-x03x.dtb \
+ imx53-tx53-x13x.dtb \
+ imx53-voipac-bsb.dtb \
imx6dl-cubox-i.dtb \
+ imx6dl-dfi-fs700-m60.dtb \
+ imx6dl-gw51xx.dtb \
+ imx6dl-gw52xx.dtb \
+ imx6dl-gw53xx.dtb \
+ imx6dl-gw54xx.dtb \
imx6dl-hummingboard.dtb \
+ imx6dl-nitrogen6x.dtb \
imx6dl-sabreauto.dtb \
+ imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
imx6dl-wandboard.dtb \
imx6q-arm2.dtb \
+ imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
+ imx6q-dfi-fs700-m60.dtb \
+ imx6q-dmo-edmqmx6.dtb \
+ imx6q-gk802.dtb \
+ imx6q-gw51xx.dtb \
+ imx6q-gw52xx.dtb \
+ imx6q-gw53xx.dtb \
+ imx6q-gw5400-a.dtb \
+ imx6q-gw54xx.dtb \
+ imx6q-nitrogen6x.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
@@ -211,6 +211,9 @@
imx28-cfa10056.dtb \
imx28-cfa10057.dtb \
imx28-cfa10058.dtb \
+ imx28-duckbill.dtb \
+ imx28-eukrea-mbmx283lc.dtb \
+ imx28-eukrea-mbmx287lc.dtb \
imx28-evk.dtb \
imx28-m28cu3.dtb \
imx28-m28evk.dtb \
@@ -227,6 +230,10 @@
omap2420-n810-wimax.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
+ omap3-cm-t3517.dtb \
+ omap3-sbc-t3517.dtb \
+ omap3-cm-t3530.dtb \
+ omap3-sbc-t3530.dtb \
omap3-cm-t3730.dtb \
omap3-sbc-t3730.dtb \
omap3-devkit8000.dtb \
@@ -241,7 +248,9 @@
omap3-gta04.dtb \
omap3-igep0020.dtb \
omap3-igep0030.dtb \
+ omap3-lilly-dbb056.dtb \
omap3-zoom3.dtb \
+ omap4-duovero-parlor.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
@@ -255,12 +264,17 @@
am335x-boneblack.dtb \
am335x-nano.dtb \
am335x-base0033.dtb \
+ am3517-craneboard.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
am43x-epos-evm.dtb \
+ am437x-gp-evm.dtb \
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
@@ -311,6 +325,7 @@
sun4i-a10-cubieboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-hackberry.dtb \
+ sun4i-a10-pcduino.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
@@ -349,6 +364,29 @@
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zed.dtb
+dtb-$(CONFIG_MACH_ARMADA_370) += \
+ armada-370-db.dtb \
+ armada-370-mirabox.dtb \
+ armada-370-netgear-rn102.dtb \
+ armada-370-netgear-rn104.dtb \
+ armada-370-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_375) += \
+ armada-375-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-db.dtb \
+ armada-385-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_XP) += \
+ armada-xp-axpwifiap.dtb \
+ armada-xp-db.dtb \
+ armada-xp-gp.dtb \
+ armada-xp-netgear-rn2120.dtb \
+ armada-xp-matrix.dtb \
+ armada-xp-openblocks-ax3-4.dtb
+dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
+ dove-cubox.dtb \
+ dove-d2plug.dtb \
+ dove-d3plug.dtb \
+ dove-dove-db.dtb
targets += dtbs
targets += $(dtb-y)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 7e6c64e..28ae040 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -260,6 +260,12 @@
>;
};
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
@@ -434,9 +440,9 @@
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
- nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
- gpmc,device-nand = "true";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
@@ -460,50 +466,51 @@
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
-
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
#address-cells = <1>;
#size-cells = <1>;
- elm_id = <&elm>;
-
- /* MTD partition table */
partition@0 {
- label = "SPL1";
+ label = "NAND.SPL";
reg = <0x00000000 0x000020000>;
};
-
partition@1 {
- label = "SPL2";
+ label = "NAND.SPL.backup1";
reg = <0x00020000 0x00020000>;
};
-
partition@2 {
- label = "SPL3";
+ label = "NAND.SPL.backup2";
reg = <0x00040000 0x00020000>;
};
-
partition@3 {
- label = "SPL4";
+ label = "NAND.SPL.backup3";
reg = <0x00060000 0x00020000>;
};
-
partition@4 {
- label = "U-boot";
- reg = <0x00080000 0x001e0000>;
+ label = "NAND.u-boot-spl";
+ reg = <0x00080000 0x00040000>;
};
-
partition@5 {
- label = "environment";
- reg = <0x00260000 0x00020000>;
+ label = "NAND.u-boot";
+ reg = <0x000C0000 0x00100000>;
};
-
partition@6 {
- label = "Kernel";
- reg = <0x00280000 0x00500000>;
+ label = "NAND.u-boot-env";
+ reg = <0x001C0000 0x00020000>;
};
-
partition@7 {
- label = "File-System";
- reg = <0x00780000 0x0F880000>;
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x001E0000 0x00020000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00200000 0x00800000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00A00000 0x0F600000>;
};
};
};
@@ -643,6 +650,9 @@
status = "okay";
vmmc-supply = <&vmmc_reg>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&sham {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 4718ec4..b50e9ef 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -45,6 +45,18 @@
regulator-boot-on;
};
+ wl12xx_vmmc: fixedregulator@2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 29 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
@@ -121,7 +133,7 @@
ti,model = "AM335x-EVMSK";
ti,audio-codec = <&tlv320aic3106>;
ti,mcasp-controller = <&mcasp1>;
- ti,codec-clock-rate = <24576000>;
+ ti,codec-clock-rate = <24000000>;
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT";
@@ -264,6 +276,24 @@
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ >;
+ };
+
+ wl12xx_gpio: pinmux_wl12xx_gpio {
+ pinctrl-single,pins = <
+ 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+ >;
+ };
};
&uart0 {
@@ -336,9 +366,18 @@
status = "okay";
};
+ usb-phy@47401b00 {
+ status = "okay";
+ };
+
usb@47401000 {
status = "okay";
};
+
+ usb@47401800 {
+ status = "okay";
+ dr_mode = "host";
+ };
};
&epwmss2 {
@@ -434,6 +473,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
+ dual_emac = <1>;
};
&davinci_mdio {
@@ -445,11 +485,13 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <2>;
};
&mmc1 {
@@ -470,6 +512,16 @@
ti,no-reset-on-init;
};
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&wl12xx_vmmc>;
+ ti,non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+};
+
&mcasp1 {
pinctrl-names = "default";
pinctrl-0 = <&mcasp1_pins>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 6d95d3d..7073429 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -58,6 +58,10 @@
275000 1125000
>;
voltage-tolerance = <2>; /* 2 percentage */
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
clock-latency = <300000>; /* From omap-cpufreq driver */
};
};
@@ -318,6 +322,7 @@
compatible = "ti,omap4-hwspinlock";
reg = <0x480ca000 0x1000>;
ti,hwmods = "spinlock";
+ #hwlock-cells = <1>;
};
wdt2: wdt@44e35000 {
@@ -399,7 +404,7 @@
ti,timer-pwm;
};
- rtc@44e3e000 {
+ rtc: rtc@44e3e000 {
compatible = "ti,da830-rtc";
reg = <0x44e3e000 0x1000>;
interrupts = <75
@@ -582,6 +587,8 @@
compatible = "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
+ interrupts = <31>;
+ interrupt-names = "ecap0";
ti,hwmods = "ecap0";
status = "disabled";
};
@@ -610,6 +617,8 @@
compatible = "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
+ interrupts = <47>;
+ interrupt-names = "ecap1";
ti,hwmods = "ecap1";
status = "disabled";
};
@@ -638,6 +647,8 @@
compatible = "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ interrupts = <61>;
+ interrupt-names = "ecap2";
ti,hwmods = "ecap2";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
new file mode 100644
index 0000000..2d40b3f
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -0,0 +1,174 @@
+/*
+ * See craneboard.org for more details
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+
+/ {
+ model = "TI AM3517 CraneBoard (TMDSEVM3517)";
+ compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&davinci_emac {
+ status = "okay";
+};
+
+&davinci_mdio {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ /* goes to expansion connector */
+ status = "disabled";
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ /* goes to expansion connector */
+ status = "disabled";
+};
+
+&mmc1 {
+ vmmc-supply = <&vdd2_reg>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ /* goes to expansion connector */
+ status = "disabled";
+};
+
+&mmc3 {
+ /* goes to expansion connector */
+ status = "disabled";
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+ tps_pins: pinmux_tps_pins {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+ >;
+ };
+};
+
+&tps {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps_pins>;
+
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ ti,en-ck32k-xtal;
+
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ /*
+ * Unused:
+ * VDIG1=2.7V,300mA max
+ * VDIG2=1.8V,300mA max
+ */
+
+ vpll_reg: regulator@7 {
+ /* VDDS_DPLL_1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ /* VDDS_SRAM_1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ /* VDDA1P8V_USBPHY */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /* VAUX33 unused */
+
+ vdac_reg: regulator@8 {
+ /* VDDA_DAC_1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ /* VDDA3P3V_USBPHY */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_CORE */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDDSHV_3V3 */
+ regulator-name = "vdd_shv";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* VDD3 unused */
+ };
+};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index c6bd4d9..36d523a 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -8,6 +8,7 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
@@ -33,6 +34,11 @@
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
};
};
@@ -351,6 +357,13 @@
status = "disabled";
};
+ hwspinlock: spinlock@480ca000 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x480ca000 0x1000>;
+ ti,hwmods = "spinlock";
+ #hwlock-cells = <1>;
+ };
+
i2c0: i2c@44e0b000 {
compatible = "ti,am4372-i2c","ti,omap4-i2c";
reg = <0x44e0b000 0x1000>;
@@ -521,6 +534,7 @@
ecap0: ecap@48300100 {
compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ #pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
status = "disabled";
@@ -528,6 +542,7 @@
ehrpwm0: ehrpwm@48300200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
reg = <0x48300200 0x80>;
ti,hwmods = "ehrpwm0";
status = "disabled";
@@ -545,6 +560,7 @@
ecap1: ecap@48302100 {
compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ #pwm-cells = <3>;
reg = <0x48302100 0x80>;
ti,hwmods = "ecap1";
status = "disabled";
@@ -552,6 +568,7 @@
ehrpwm1: ehrpwm@48302200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
reg = <0x48302200 0x80>;
ti,hwmods = "ehrpwm1";
status = "disabled";
@@ -569,6 +586,7 @@
ecap2: ecap@48304100 {
compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ #pwm-cells = <3>;
reg = <0x48304100 0x80>;
ti,hwmods = "ecap2";
status = "disabled";
@@ -576,6 +594,7 @@
ehrpwm2: ehrpwm@48304200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
reg = <0x48304200 0x80>;
ti,hwmods = "ehrpwm2";
status = "disabled";
@@ -593,6 +612,7 @@
ehrpwm3: ehrpwm@48306200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
reg = <0x48306200 0x80>;
ti,hwmods = "ehrpwm3";
status = "disabled";
@@ -610,6 +630,7 @@
ehrpwm4: ehrpwm@48308200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
reg = <0x48308200 0x80>;
ti,hwmods = "ehrpwm4";
status = "disabled";
@@ -627,6 +648,7 @@
ehrpwm5: ehrpwm@4830a200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
reg = <0x4830a200 0x80>;
ti,hwmods = "ehrpwm5";
status = "disabled";
@@ -689,6 +711,30 @@
<&edma 11>;
dma-names = "tx", "rx";
};
+
+ elm: elm@48080000 {
+ compatible = "ti,am3352-elm";
+ reg = <0x48080000 0x2000>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "elm";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ clocks = <&l3s_gclk>;
+ clock-names = "fck";
+ reg = <0x50000000 0x2000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
new file mode 100644
index 0000000..df8798e
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x GP EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "TI AM437x GP EVM";
+ compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+
+ vmmcsd_fixed: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+
+ matrix_keypad: matrix_keypad@0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
+ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
+ &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
+
+ col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
+ &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
+
+ linux,keymap = <0x00000201 /* P1 */
+ 0x00010202 /* P2 */
+ 0x01000067 /* UP */
+ 0x0101006a /* RIGHT */
+ 0x02000069 /* LEFT */
+ 0x0201006c>; /* DOWN */
+ };
+};
+
+&am43xx_pinmux {
+ i2c0_pins: i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: i2c1_pins {
+ pinctrl-single,pins = <
+ 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ ecap0_pins: backlight_pins {
+ pinctrl-single,pins = <
+ 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ >;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index fbf9c4c..167dbc8 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -13,6 +13,7 @@
#include "am4372.dtsi"
#include <dt-bindings/pinctrl/am43xx.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "TI AM43x EPOS EVM";
@@ -79,6 +80,64 @@
0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
+
+ nand_flash_x8: nand_flash_x8 {
+ pinctrl-single,pins = <
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
+ 0x0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ 0x4 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ 0x8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ 0xc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
+ 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+
+ ecap0_pins: backlight_pins {
+ pinctrl-single,pins = <
+ 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
+ 0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0_pins {
+ pinctrl-single,pins = <
+ 0x150 (PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
+ 0x154 (PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ 0x158 (PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ 0x15c (PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1_pins {
+ pinctrl-single,pins = <
+ 0x190 (PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
+ 0x194 (PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
+ 0x198 (PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
+ 0x19c (PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
};
matrix_keypad: matrix_keypad@0 {
@@ -113,12 +172,22 @@
0x0203006c /* DOWN */
0x03030069>; /* LEFT */
};
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
};
&mmc1 {
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&mac {
@@ -169,6 +238,12 @@
};
};
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
&gpio0 {
status = "okay";
};
@@ -184,3 +259,111 @@
&gpio3 {
status = "okay";
};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_flash_x8>;
+ ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
+ gpmc,cs-wr-off-ns = <40>;
+ gpmc,adv-on-ns = <0>; /* cs-on-ns */
+ gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
+ gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
+ gpmc,we-on-ns = <0>; /* cs-on-ns */
+ gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
+ gpmc,oe-on-ns = <3>; /* cs-on-ns + tRR + 2 */
+ gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
+ gpmc,access-ns = <30>; /* tCEA + 4*/
+ gpmc,rd-cycle-ns = <40>;
+ gpmc,wr-cycle-ns = <40>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "NAND.SPL";
+ reg = <0x00000000 0x00040000>;
+ };
+ partition@1 {
+ label = "NAND.SPL.backup1";
+ reg = <0x00040000 0x00040000>;
+ };
+ partition@2 {
+ label = "NAND.SPL.backup2";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@3 {
+ label = "NAND.SPL.backup3";
+ reg = <0x000C0000 0x00040000>;
+ };
+ partition@4 {
+ label = "NAND.u-boot-spl-os";
+ reg = <0x00100000 0x00080000>;
+ };
+ partition@5 {
+ label = "NAND.u-boot";
+ reg = <0x00180000 0x00100000>;
+ };
+ partition@6 {
+ label = "NAND.u-boot-env";
+ reg = <0x00280000 0x00040000>;
+ };
+ partition@7 {
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x002C0000 0x00040000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00300000 0x00700000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00800000 0x1F600000>;
+ };
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
new file mode 100644
index 0000000..ce13755
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -0,0 +1,229 @@
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ * Copyright (C) 2014 Atmel,
+ * 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+ model = "SAMA5D3 Xplained";
+ compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0000000 {
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>;
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+
+ usart0: serial@f001c000 {
+ status = "okay";
+ };
+
+ usart1: serial@f0020000 {
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+ status = "okay";
+ };
+
+ uart0: serial@f0024000 {
+ status = "okay";
+ };
+
+ mmc1: mmc@f8000000 {
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi1: spi@f8008000 {
+ cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+ status = "okay";
+ };
+
+ adc0: adc@f8018000 {
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_ad6
+ &pinctrl_adc0_ad7
+ &pinctrl_adc0_ad8
+ &pinctrl_adc0_ad9
+ >;
+ status = "okay";
+ };
+
+ i2c2: i2c@f801c000 {
+ dmas = <0>, <0>; /* Do not use DMA for i2c2 */
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ pinctrl@fffff200 {
+ board {
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_mmc1_cd: mmc1_cd {
+ atmel,pins =
+ <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ main: mainck {
+ clock-frequency = <12000000>;
+ };
+ };
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+
+ usb0: gadget@00500000 {
+ atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00600000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioE 3 GPIO_ACTIVE_LOW
+ &pioE 4 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00700000 {
+ status = "okay";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ bp3 {
+ label = "PB_USER";
+ gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d2 {
+ label = "d2";
+ gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ d3 {
+ label = "d3";
+ gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 0042f73..fece866 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -523,7 +523,7 @@
};
i2c0: i2c@fff88000 {
- compatible = "atmel,at91sam9263-i2c";
+ compatible = "atmel,at91sam9260-i2c";
reg = <0xfff88000 0x100>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index e9487f6..924a6a6 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -124,6 +124,10 @@
nand-on-flash-bbt;
status = "okay";
};
+
+ usb0: ohci@00500000 {
+ status = "okay";
+ };
};
leds {
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
deleted file mode 100644
index 396b704..0000000
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2012 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include "bcm11351.dtsi"
-
-/ {
- model = "BCM11351 BRT board";
- compatible = "brcm,bcm11351-brt", "brcm,bcm11351";
-
- memory {
- reg = <0x80000000 0x40000000>; /* 1 GB */
- };
-
- uart@3e000000 {
- status = "okay";
- };
-
- sdio1: sdio@3f180000 {
- max-frequency = <48000000>;
- status = "okay";
- };
-
- sdio2: sdio@3f190000 {
- non-removable;
- max-frequency = <48000000>;
- status = "okay";
- };
-
- sdio4: sdio@3f1b0000 {
- max-frequency = <48000000>;
- cd-gpios = <&gpio 14 0>;
- status = "okay";
- };
-
- usbotg: usb@3f120000 {
- status = "okay";
- };
-
- usbphy: usb-phy@3f130000 {
- status = "okay";
- };
-};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index e491b82..94b36f6 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -14,6 +14,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include "dt-bindings/clock/bcm281xx.h"
+
#include "skeleton.dtsi"
/ {
@@ -43,7 +45,7 @@
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e000000 0x1000>;
- clocks = <&uartb_clk>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -53,7 +55,7 @@
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e001000 0x1000>;
- clocks = <&uartb2_clk>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -63,7 +65,7 @@
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e002000 0x1000>;
- clocks = <&uartb3_clk>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -73,7 +75,7 @@
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
status = "disabled";
reg = <0x3e003000 0x1000>;
- clocks = <&uartb4_clk>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -95,7 +97,7 @@
compatible = "brcm,kona-timer";
reg = <0x35006000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&hub_timer_clk>;
+ clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
};
gpio: gpio@35003000 {
@@ -118,7 +120,7 @@
compatible = "brcm,kona-sdhci";
reg = <0x3f180000 0x10000>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdio1_clk>;
+ clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
status = "disabled";
};
@@ -126,7 +128,7 @@
compatible = "brcm,kona-sdhci";
reg = <0x3f190000 0x10000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdio2_clk>;
+ clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
status = "disabled";
};
@@ -134,7 +136,7 @@
compatible = "brcm,kona-sdhci";
reg = <0x3f1a0000 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdio3_clk>;
+ clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
status = "disabled";
};
@@ -142,7 +144,7 @@
compatible = "brcm,kona-sdhci";
reg = <0x3f1b0000 0x10000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sdio4_clk>;
+ clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
status = "disabled";
};
@@ -157,7 +159,7 @@
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&bsc1_clk>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
status = "disabled";
};
@@ -167,7 +169,7 @@
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&bsc2_clk>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
status = "disabled";
};
@@ -177,7 +179,7 @@
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&bsc3_clk>;
+ clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
status = "disabled";
};
@@ -187,99 +189,125 @@
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&pmu_bsc_clk>;
+ clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
status = "disabled";
};
clocks {
- bsc1_clk: bsc1 {
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- #clock-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ root_ccu: root_ccu {
+ compatible = "brcm,bcm11351-root-ccu";
+ reg = <0x35001000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "frac_1m";
};
- bsc2_clk: bsc2 {
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- #clock-cells = <0>;
+ hub_ccu: hub_ccu {
+ compatible = "brcm,bcm11351-hub-ccu";
+ reg = <0x34000000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "tmon_1m";
};
- bsc3_clk: bsc3 {
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- #clock-cells = <0>;
+ aon_ccu: aon_ccu {
+ compatible = "brcm,bcm11351-aon-ccu";
+ reg = <0x35002000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "hub_timer",
+ "pmu_bsc",
+ "pmu_bsc_var";
};
- pmu_bsc_clk: pmu_bsc {
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
- #clock-cells = <0>;
+ master_ccu: master_ccu {
+ compatible = "brcm,bcm11351-master-ccu";
+ reg = <0x3f001000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "sdio1",
+ "sdio2",
+ "sdio3",
+ "sdio4",
+ "usb_ic",
+ "hsic2_48m",
+ "hsic2_12m";
};
- hub_timer_clk: hub_timer {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- #clock-cells = <0>;
+ slave_ccu: slave_ccu {
+ compatible = "brcm,bcm11351-slave-ccu";
+ reg = <0x3e011000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "uartb",
+ "uartb2",
+ "uartb3",
+ "uartb4",
+ "ssp0",
+ "ssp2",
+ "bsc1",
+ "bsc2",
+ "bsc3",
+ "pwm";
};
- pwm_clk: pwm {
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
+ ref_1m_clk: ref_1m {
#clock-cells = <0>;
- };
-
- sdio1_clk: sdio1 {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
-
- sdio2_clk: sdio2 {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
-
- sdio3_clk: sdio3 {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
-
- sdio4_clk: sdio4 {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
-
- tmon_1m_clk: tmon_1m {
compatible = "fixed-clock";
clock-frequency = <1000000>;
- #clock-cells = <0>;
};
- uartb_clk: uartb {
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
+ ref_32k_clk: ref_32k {
#clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
};
- uartb2_clk: uartb2 {
- compatible = "fixed-clock";
- clock-frequency = <13000000>;
+ bbl_32k_clk: bbl_32k {
#clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
};
- uartb3_clk: uartb3 {
+ ref_13m_clk: ref_13m {
+ #clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <13000000>;
- #clock-cells = <0>;
};
- uartb4_clk: uartb4 {
+ var_13m_clk: var_13m {
+ #clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <13000000>;
+ };
+
+ dft_19_5m_clk: dft_19_5m {
#clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <19500000>;
+ };
+
+ ref_crystal_clk: ref_crystal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ ref_cx40_clk: ref_cx40 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ };
+
+ ref_52m_clk: ref_52m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <52000000>;
+ };
+
+ var_52m_clk: var_52m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <52000000>;
};
usb_otg_ahb_clk: usb_otg_ahb {
@@ -287,6 +315,66 @@
clock-frequency = <52000000>;
#clock-cells = <0>;
};
+
+ ref_96m_clk: ref_96m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <96000000>;
+ };
+
+ var_96m_clk: var_96m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <96000000>;
+ };
+
+ ref_104m_clk: ref_104m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <104000000>;
+ };
+
+ var_104m_clk: var_104m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <104000000>;
+ };
+
+ ref_156m_clk: ref_156m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <156000000>;
+ };
+
+ var_156m_clk: var_156m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <156000000>;
+ };
+
+ ref_208m_clk: ref_208m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <208000000>;
+ };
+
+ var_208m_clk: var_208m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <208000000>;
+ };
+
+ ref_312m_clk: ref_312m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <312000000>;
+ };
+
+ var_312m_clk: var_312m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <312000000>;
+ };
};
usbotg: usb@3f120000 {
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 5ff2382..3604554 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -49,11 +49,6 @@
clock-frequency = <400000>;
};
- sdio1: sdio@3f180000 {
- max-frequency = <48000000>;
- status = "okay";
- };
-
sdio2: sdio@3f190000 {
non-removable;
max-frequency = <48000000>;
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index b021c96..b8473c4 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -15,39 +15,52 @@
#size-cells = <1>;
ranges = <0x7e000000 0x20000000 0x02000000>;
- timer {
+ timer@7e003000 {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
clock-frequency = <1000000>;
};
- intc: interrupt-controller {
+ dma: dma@7e007000 {
+ compatible = "brcm,bcm2835-dma";
+ reg = <0x7e007000 0xf00>;
+ interrupts = <1 16>,
+ <1 17>,
+ <1 18>,
+ <1 19>,
+ <1 20>,
+ <1 21>,
+ <1 22>,
+ <1 23>,
+ <1 24>,
+ <1 25>,
+ <1 26>,
+ <1 27>,
+ <1 28>;
+
+ #dma-cells = <1>;
+ brcm,dma-channel-mask = <0x7f35>;
+ };
+
+ intc: interrupt-controller@7e00b200 {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
- watchdog {
+ watchdog@7e100000 {
compatible = "brcm,bcm2835-pm-wdt";
reg = <0x7e100000 0x28>;
};
- rng {
+ rng@7e104000 {
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
};
- uart@20201000 {
- compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
- reg = <0x7e201000 0x1000>;
- interrupts = <2 25>;
- clock-frequency = <3000000>;
- arm,primecell-periphid = <0x00241011>;
- };
-
- gpio: gpio {
+ gpio: gpio@7e200000 {
compatible = "brcm,bcm2835-gpio";
reg = <0x7e200000 0xb4>;
/*
@@ -70,7 +83,25 @@
#interrupt-cells = <2>;
};
- spi: spi@20204000 {
+ uart@7e201000 {
+ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+ reg = <0x7e201000 0x1000>;
+ interrupts = <2 25>;
+ clock-frequency = <3000000>;
+ arm,primecell-periphid = <0x00241011>;
+ };
+
+ i2s: i2s@7e203000 {
+ compatible = "brcm,bcm2835-i2s";
+ reg = <0x7e203000 0x20>,
+ <0x7e101098 0x02>;
+
+ dmas = <&dma 2>,
+ <&dma 3>;
+ dma-names = "tx", "rx";
+ };
+
+ spi: spi@7e204000 {
compatible = "brcm,bcm2835-spi";
reg = <0x7e204000 0x1000>;
interrupts = <2 22>;
@@ -90,7 +121,15 @@
status = "disabled";
};
- i2c1: i2c@20804000 {
+ sdhci: sdhci@7e300000 {
+ compatible = "brcm,bcm2835-sdhci";
+ reg = <0x7e300000 0x100>;
+ interrupts = <2 30>;
+ clocks = <&clk_mmc>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@7e804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
@@ -100,19 +139,15 @@
status = "disabled";
};
- sdhci: sdhci {
- compatible = "brcm,bcm2835-sdhci";
- reg = <0x7e300000 0x100>;
- interrupts = <2 30>;
- clocks = <&clk_mmc>;
- status = "disabled";
- };
-
- usb {
+ usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
interrupts = <1 9>;
};
+
+ arm-pmu {
+ compatible = "arm,arm1176-pmu";
+ };
};
clocks {
@@ -120,24 +155,27 @@
#address-cells = <1>;
#size-cells = <0>;
- clk_mmc: mmc {
+ clk_mmc: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
+ clock-output-names = "mmc";
clock-frequency = <100000000>;
};
- clk_i2c: i2c {
+ clk_i2c: clock@1 {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
+ clock-output-names = "i2c";
clock-frequency = <250000000>;
};
- clk_spi: spi {
+ clk_spi: clock@2 {
compatible = "fixed-clock";
reg = <2>;
#clock-cells = <0>;
+ clock-output-names = "spi";
clock-frequency = <250000000>;
};
};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
new file mode 100644
index 0000000..3b5259d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -0,0 +1,35 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "netgear,r6250v1", "brcm,bcm4708";
+ model = "Netgear R6250 V1 (BCM4708)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chipcommonA {
+ uart0: serial@0300 {
+ status = "okay";
+ };
+
+ uart1: serial@0400 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
new file mode 100644
index 0000000..31141e8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM4708 SoC.
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+ compatible = "brcm,bcm4708";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x1>;
+ };
+ };
+
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
new file mode 100644
index 0000000..53c624f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ chipcommonA {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18000000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@0300 {
+ compatible = "ns16550";
+ reg = <0x0300 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart1: serial@0400 {
+ compatible = "ns16550";
+ reg = <0x0400 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+ };
+
+ mpcore {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19020000 0x00003000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scu@0000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x0000 0x100>;
+ };
+
+ timer@0200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x0200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph>;
+ };
+
+ local-timer@0600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x0600 0x100>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph>;
+ };
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x0100 0x100>;
+ };
+
+ L2: cache-controller@2000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x2000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* As long as we do not have a real clock driver us this
+ * fixed clock */
+ clk_periph: periph {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 1fd75aa..9e3caf3 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -47,6 +47,11 @@
1000000 1060000
1176000 1160000
>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
};
cpu@1 {
device_type = "cpu";
@@ -464,6 +469,20 @@
ti,hwmods = "wd_timer2";
};
+ hwspinlock: spinlock@4a0f6000 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x4a0f6000 0x1000>;
+ ti,hwmods = "spinlock";
+ #hwlock-cells = <1>;
+ };
+
+ dmm@4e000000 {
+ compatible = "ti,omap5-dmm";
+ reg = <0x4e000000 0x800>;
+ interrupts = <0 113 0x4>;
+ ti,hwmods = "dmm";
+ };
+
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
@@ -559,6 +578,138 @@
status = "disabled";
};
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+ <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+ <0x4ae0c158 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x80>;
+ /* LDOVBBMPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1160000 0 0x4 0 0x02000000 0x01F00000
+ 1210000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_ivahd: regulator-abb-ivahd {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_ivahd";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+ <0x4a002470 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x40000000>;
+ /* LDOVBBIVA_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBIVA_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_dspeve: regulator-abb-dspeve {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_dspeve";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+ <0x4a00246c 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x20000000>;
+ /* LDOVBBDSPEVE_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBDSPEVE_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_gpu: regulator-abb-gpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_gpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+ <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+ <0x4ae0c154 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x10000000>;
+ /* LDOVBBGPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBGPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1090000 0 0x0 0 0x02000000 0x01F00000
+ 1210000 0 0x4 0 0x02000000 0x01F00000
+ 1280000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
index aa5c0f6..b4031fa 100644
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ b/arch/arm/boot/dts/efm32gg-dk3750.dts
@@ -26,7 +26,7 @@
};
i2c@4000a000 {
- location = <3>;
+ efm32,location = <3>;
status = "ok";
temp@48 {
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index a342ab0..106d505 100644
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -84,7 +84,7 @@
status = "disabled";
};
- spi2: spi@40x4000c800 { /* USART2 */
+ spi2: spi@4000c800 { /* USART2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "efm32,spi";
@@ -110,7 +110,7 @@
status = "disabled";
};
- uart2: uart@40x4000c800 { /* USART2 */
+ uart2: uart@4000c800 { /* USART2 */
compatible = "efm32,uart";
reg = <0x4000c800 0x400>;
interrupts = <18 19>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 08452e1..28b5ec7 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -19,6 +19,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos4.h>
#include "skeleton.dtsi"
/ {
@@ -119,7 +120,7 @@
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
interrupts = <0 84 0>;
- clocks = <&clock 256>, <&clock 128>;
+ clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
@@ -130,7 +131,7 @@
compatible = "samsung,exynos4210-fimc";
reg = <0x11810000 0x1000>;
interrupts = <0 85 0>;
- clocks = <&clock 257>, <&clock 129>;
+ clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
@@ -141,7 +142,7 @@
compatible = "samsung,exynos4210-fimc";
reg = <0x11820000 0x1000>;
interrupts = <0 86 0>;
- clocks = <&clock 258>, <&clock 130>;
+ clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
@@ -152,7 +153,7 @@
compatible = "samsung,exynos4210-fimc";
reg = <0x11830000 0x1000>;
interrupts = <0 87 0>;
- clocks = <&clock 259>, <&clock 131>;
+ clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
clock-names = "fimc", "sclk_fimc";
samsung,power-domain = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
@@ -163,7 +164,7 @@
compatible = "samsung,exynos4210-csis";
reg = <0x11880000 0x4000>;
interrupts = <0 78 0>;
- clocks = <&clock 260>, <&clock 134>;
+ clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
clock-names = "csis", "sclk_csis";
bus-width = <4>;
samsung,power-domain = <&pd_cam>;
@@ -178,7 +179,7 @@
compatible = "samsung,exynos4210-csis";
reg = <0x11890000 0x4000>;
interrupts = <0 80 0>;
- clocks = <&clock 261>, <&clock 135>;
+ clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
clock-names = "csis", "sclk_csis";
bus-width = <2>;
samsung,power-domain = <&pd_cam>;
@@ -194,7 +195,7 @@
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
interrupts = <0 43 0>;
- clocks = <&clock 345>;
+ clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
status = "disabled";
};
@@ -203,7 +204,7 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 44 0>, <0 45 0>;
- clocks = <&clock 346>;
+ clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
};
@@ -212,7 +213,7 @@
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <0 109 0>;
- clocks = <&clock 347>;
+ clocks = <&clock CLK_KEYIF>;
clock-names = "keypad";
status = "disabled";
};
@@ -221,7 +222,7 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <0 73 0>;
- clocks = <&clock 297>, <&clock 145>;
+ clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -230,7 +231,7 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <0 74 0>;
- clocks = <&clock 298>, <&clock 146>;
+ clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -239,7 +240,7 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <0 75 0>;
- clocks = <&clock 299>, <&clock 147>;
+ clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -248,7 +249,7 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <0 76 0>;
- clocks = <&clock 300>, <&clock 148>;
+ clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -257,7 +258,7 @@
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
interrupts = <0 70 0>;
- clocks = <&clock 304>;
+ clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
};
@@ -266,7 +267,7 @@
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
interrupts = <0 70 0>;
- clocks = <&clock 304>;
+ clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
};
@@ -276,7 +277,7 @@
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>;
- clocks = <&clock 273>;
+ clocks = <&clock CLK_MFC>;
clock-names = "mfc";
status = "disabled";
};
@@ -285,7 +286,7 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
- clocks = <&clock 312>, <&clock 151>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -294,7 +295,7 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 53 0>;
- clocks = <&clock 313>, <&clock 152>;
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -303,7 +304,7 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 314>, <&clock 153>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -312,7 +313,7 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
interrupts = <0 55 0>;
- clocks = <&clock 315>, <&clock 154>;
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -323,7 +324,7 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <0 58 0>;
- clocks = <&clock 317>;
+ clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
@@ -336,7 +337,7 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <0 59 0>;
- clocks = <&clock 318>;
+ clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
@@ -349,7 +350,7 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <0 60 0>;
- clocks = <&clock 319>;
+ clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
status = "disabled";
};
@@ -360,7 +361,7 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <0 61 0>;
- clocks = <&clock 320>;
+ clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
status = "disabled";
};
@@ -371,7 +372,7 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
interrupts = <0 62 0>;
- clocks = <&clock 321>;
+ clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
status = "disabled";
};
@@ -382,7 +383,7 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
interrupts = <0 63 0>;
- clocks = <&clock 322>;
+ clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
status = "disabled";
};
@@ -393,7 +394,7 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
interrupts = <0 64 0>;
- clocks = <&clock 323>;
+ clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
status = "disabled";
};
@@ -404,7 +405,7 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
interrupts = <0 65 0>;
- clocks = <&clock 324>;
+ clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
status = "disabled";
};
@@ -417,7 +418,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 327>, <&clock 159>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
@@ -432,7 +433,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 328>, <&clock 160>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
@@ -447,7 +448,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 329>, <&clock 161>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
@@ -458,7 +459,7 @@
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
- clocks = <&clock 336>;
+ clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <2>;
status = "disabled";
@@ -475,7 +476,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
- clocks = <&clock 292>;
+ clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -486,7 +487,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
- clocks = <&clock 293>;
+ clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -497,7 +498,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
- clocks = <&clock 279>;
+ clocks = <&clock CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -511,7 +512,7 @@
reg = <0x11c00000 0x20000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <11 0>, <11 1>, <11 2>;
- clocks = <&clock 140>, <&clock 283>;
+ clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
samsung,power-domain = <&pd_lcd0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 48ecd7a..cb0e768d 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -53,7 +53,7 @@
reg = <0x10050000 0x800>;
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
- clocks = <&clock 3>, <&clock 344>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
@@ -109,7 +109,7 @@
interrupt-parent = <&combiner>;
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
- clocks = <&clock 383>;
+ clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
status = "disabled";
};
@@ -118,13 +118,14 @@
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
interrupts = <0 89 0>;
- clocks = <&clock 177>, <&clock 277>;
+ clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
camera {
- clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+ clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+ <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
fimc_0: fimc@11800000 {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 9804fcb..12459b0 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -251,7 +251,7 @@
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 6bc0539..388f035 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -459,8 +459,8 @@
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1300000>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>; /* Normal Mode */
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 5c412aa..e0eb6bb 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -47,7 +47,7 @@
reg = <0x10050000 0x800>;
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>;
- clocks = <&clock 3>, <&clock 344>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
@@ -97,13 +97,14 @@
compatible = "samsung,exynos4212-g2d";
reg = <0x10800000 0x1000>;
interrupts = <0 89 0>;
- clocks = <&clock 177>, <&clock 277>;
+ clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
camera {
- clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+ clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+ <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
fimc_0: fimc@11800000 {
@@ -145,7 +146,7 @@
reg = <0x12390000 0x1000>;
interrupts = <0 105 0>;
samsung,power-domain = <&pd_isp>;
- clocks = <&clock 353>;
+ clocks = <&clock CLK_FIMC_LITE0>;
clock-names = "flite";
status = "disabled";
};
@@ -155,7 +156,7 @@
reg = <0x123A0000 0x1000>;
interrupts = <0 106 0>;
samsung,power-domain = <&pd_isp>;
- clocks = <&clock 354>;
+ clocks = <&clock CLK_FIMC_LITE1>;
clock-names = "flite";
status = "disabled";
};
@@ -165,12 +166,19 @@
reg = <0x12000000 0x260000>;
interrupts = <0 90 0>, <0 95 0>;
samsung,power-domain = <&pd_isp>;
- clocks = <&clock 353>, <&clock 354>, <&clock 355>,
- <&clock 356>, <&clock 17>, <&clock 357>,
- <&clock 358>, <&clock 359>, <&clock 360>,
- <&clock 450>,<&clock 451>, <&clock 452>,
- <&clock 453>, <&clock 176>, <&clock 13>,
- <&clock 454>, <&clock 395>, <&clock 455>;
+ clocks = <&clock CLK_FIMC_LITE0>,
+ <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
+ <&clock CLK_PPMUISPMX>,
+ <&clock CLK_MOUT_MPLL_USER_T>,
+ <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
+ <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
+ <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
+ <&clock CLK_DIV_MCUISP0>,
+ <&clock CLK_DIV_MCUISP1>,
+ <&clock CLK_SCLK_UART_ISP>,
+ <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
+ <&clock CLK_ACLK400_MCUISP>,
+ <&clock CLK_DIV_ACLK400_MCUISP>;
clock-names = "lite0", "lite1", "ppmuispx",
"ppmuispmx", "mpll", "isp",
"drc", "fd", "mcuisp",
@@ -190,7 +198,7 @@
i2c1_isp: i2c-isp@12140000 {
compatible = "samsung,exynos4212-i2c-isp";
reg = <0x12140000 0x100>;
- clocks = <&clock 370>;
+ clocks = <&clock CLK_I2C1_ISP>;
clock-names = "i2c_isp";
#address-cells = <1>;
#size-cells = <0>;
@@ -205,7 +213,7 @@
#address-cells = <1>;
#size-cells = <0>;
fifo-depth = <0x80>;
- clocks = <&clock 301>, <&clock 149>;
+ clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
clock-names = "biu", "ciu";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 258dca4..79d0608 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -81,13 +81,6 @@
status = "disabled";
};
- watchdog {
- compatible = "samsung,s3c2410-wdt";
- reg = <0x101D0000 0x100>;
- interrupts = <0 42 0>;
- status = "disabled";
- };
-
fimd@14400000 {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index b42e658..56c4078 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -25,6 +25,10 @@
bootargs = "console=ttySAC2,115200";
};
+ rtc@101E0000 {
+ status = "okay";
+ };
+
codec@11000000 {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 3e69837..f76946e 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -27,6 +27,10 @@
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
+ rtc@101E0000 {
+ status = "okay";
+ };
+
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
@@ -36,6 +40,148 @@
compatible = "samsung,s524ad0xd1";
reg = <0x50>;
};
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.2V_LDO_OUT2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "P2.8V_LDO_OUT4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.8V_LDO_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "P1.1V_LDO_OUT6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
};
vdd: fixed-regulator@0 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 7e45eea..b13bf49 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -20,6 +20,10 @@
i2c104 = &i2c_104;
};
+ rtc@101E0000 {
+ status = "okay";
+ };
+
pinctrl@11400000 {
sd3_clk: sd3-clk {
samsung,pin-drv = <0>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index b7dec41..987cfbe 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -17,6 +17,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
@@ -90,7 +91,8 @@
compatible = "samsung,exynos5250-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
- clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+ <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
@@ -115,7 +117,7 @@
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>;
- clocks = <&clock 1>, <&clock 335>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
@@ -167,16 +169,25 @@
interrupts = <0 47 0>;
};
- watchdog {
- clocks = <&clock 336>;
+ pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5250-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+ };
+
+ watchdog@101D0000 {
+ compatible = "samsung,exynos5250-wdt";
+ reg = <0x101D0000 0x100>;
+ interrupts = <0 42 0>;
+ clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
};
g2d@10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
interrupts = <0 91 0>;
- clocks = <&clock 345>;
+ clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
};
@@ -185,41 +196,41 @@
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
samsung,power-domain = <&pd_mfc>;
- clocks = <&clock 266>;
+ clocks = <&clock CLK_MFC>;
clock-names = "mfc";
};
rtc@101E0000 {
- clocks = <&clock 337>;
+ clocks = <&clock CLK_RTC>;
clock-names = "rtc";
- status = "okay";
+ status = "disabled";
};
tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
- clocks = <&clock 338>;
+ clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
};
serial@12C00000 {
- clocks = <&clock 289>, <&clock 146>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
- clocks = <&clock 290>, <&clock 147>;
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
- clocks = <&clock 291>, <&clock 148>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
- clocks = <&clock 292>, <&clock 149>;
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -227,7 +238,7 @@
compatible = "samsung,exynos5-sata-ahci";
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
- clocks = <&clock 277>, <&clock 143>;
+ clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
};
@@ -242,7 +253,7 @@
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 294>;
+ clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
@@ -255,7 +266,7 @@
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 295>;
+ clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
@@ -268,7 +279,7 @@
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 296>;
+ clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
@@ -281,7 +292,7 @@
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 297>;
+ clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
@@ -294,7 +305,7 @@
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 298>;
+ clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_bus>;
@@ -307,7 +318,7 @@
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 299>;
+ clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_bus>;
@@ -320,7 +331,7 @@
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 300>;
+ clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_bus>;
@@ -333,7 +344,7 @@
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 301>;
+ clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_bus>;
@@ -346,7 +357,7 @@
interrupts = <0 64 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 302>;
+ clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
};
@@ -356,7 +367,7 @@
reg = <0x121D0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 288>;
+ clocks = <&clock CLK_SATA_PHYI2C>;
clock-names = "i2c";
status = "disabled";
};
@@ -371,7 +382,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 304>, <&clock 154>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
@@ -387,7 +398,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 305>, <&clock 155>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
@@ -403,7 +414,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 306>, <&clock 156>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
@@ -415,7 +426,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
- clocks = <&clock 280>, <&clock 139>;
+ clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
@@ -427,7 +438,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
- clocks = <&clock 281>, <&clock 140>;
+ clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
@@ -439,7 +450,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
- clocks = <&clock 282>, <&clock 141>;
+ clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
@@ -451,7 +462,7 @@
interrupts = <0 78 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 283>, <&clock 142>;
+ clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
@@ -481,7 +492,7 @@
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
- clocks = <&clock 307>, <&clock 157>;
+ clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
@@ -494,7 +505,7 @@
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
- clocks = <&clock 308>, <&clock 158>;
+ clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
@@ -502,7 +513,7 @@
usb@12000000 {
compatible = "samsung,exynos5250-dwusb3";
- clocks = <&clock 286>;
+ clocks = <&clock CLK_USB3>;
clock-names = "usbdrd30";
#address-cells = <1>;
#size-cells = <1>;
@@ -519,7 +530,7 @@
usb3_phy: usbphy@12100000 {
compatible = "samsung,exynos5250-usb3phy";
reg = <0x12100000 0x100>;
- clocks = <&clock 1>, <&clock 286>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>;
clock-names = "ext_xtal", "usbdrd30";
#address-cells = <1>;
#size-cells = <1>;
@@ -535,7 +546,7 @@
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
- clocks = <&clock 285>;
+ clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
};
@@ -544,14 +555,14 @@
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
- clocks = <&clock 285>;
+ clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
};
usb2_phy: usbphy@12130000 {
compatible = "samsung,exynos5250-usb2phy";
reg = <0x12130000 0x100>;
- clocks = <&clock 1>, <&clock 285>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
clock-names = "ext_xtal", "usbhost";
#address-cells = <1>;
#size-cells = <1>;
@@ -568,7 +579,7 @@
reg = <0x12dd0000 0x100>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
- clocks = <&clock 311>;
+ clocks = <&clock CLK_PWM>;
clock-names = "timers";
};
@@ -583,7 +594,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
- clocks = <&clock 275>;
+ clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -594,7 +605,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
- clocks = <&clock 276>;
+ clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -605,7 +616,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
- clocks = <&clock 346>;
+ clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -616,7 +627,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
- clocks = <&clock 271>;
+ clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -629,7 +640,7 @@
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 256>;
+ clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
};
@@ -638,7 +649,7 @@
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 257>;
+ clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
};
@@ -647,7 +658,7 @@
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 258>;
+ clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
};
@@ -656,7 +667,7 @@
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
samsung,power-domain = <&pd_gsc>;
- clocks = <&clock 259>;
+ clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
};
@@ -664,8 +675,9 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
- clocks = <&clock 344>, <&clock 136>, <&clock 137>,
- <&clock 159>, <&clock 1024>;
+ clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+ <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+ <&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
};
@@ -674,7 +686,7 @@
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
- clocks = <&clock 343>, <&clock 136>;
+ clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
};
@@ -685,14 +697,14 @@
};
dp-controller@145B0000 {
- clocks = <&clock 342>;
+ clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
fimd@14400000 {
- clocks = <&clock 133>, <&clock 339>;
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
@@ -700,7 +712,7 @@
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>, <0x10040718 0x4>;
interrupts = <0 106 0>;
- clocks = <&clock 303>;
+ clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 7340745..f509e8f 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -11,6 +11,8 @@
/dts-v1/;
#include "exynos5420.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
@@ -31,6 +33,10 @@
};
};
+ rtc@101E0000 {
+ status = "okay";
+ };
+
mmc@12200000 {
status = "okay";
broken-cd;
@@ -41,6 +47,7 @@
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ vmmc-supply = <&ldo10_reg>;
slot@0 {
reg = <0>;
@@ -57,10 +64,301 @@
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ vmmc-supply = <&ldo10_reg>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
+
+ hsi2c_4: i2c@12CA0000 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "PVDD_ALIVE_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "PVDD_APIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "PVDD_APIO_MMCON_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "PVDD_ADC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "PVDD_PLL_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "PVDD_ANAIP_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "PVDD_ANAIP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "PVDD_ABB_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "PVDD_USB_3V3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "PVDD_PRE_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "PVDD_USB_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "PVDD_HSIC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "PVDD_APIO_MMCOFF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "PVDD_PERI_2V8";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "PVDD_PERI_3V3";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "PVDD_EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "PVDD_TFLASH_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "PVDD_BTWIFI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "PVDD_CAM1IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "PVDD_MIFS_1V1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "PVDD_CAM1_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "PVDD_CAM0_AF_2V8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "PVDD_G3DS_1V0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "PVDD_TSP_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "PVDD_AUDIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "PVDD_PERI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "PVDD_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "PVDD_CAM0IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "PVDD_CAM0_DVDD_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "PVDD_CAM0_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "PVDD_MIF_1V1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "PVDD_INT_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "PVDD_G3D_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "PVDD_LPDDR3_1V2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "PVDD_KFC_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VIN_LLDO_1V4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VIN_MLDO_2V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VIN_HLDO_3V5";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "PVDD_EMMCF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "SW-TACT1";
+ gpios = <&gpx2 7 1>;
+ linux,code = <KEY_WAKEUP>;
+ gpio-key,wakeup;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index fb5a1e2..ae1ee04 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -31,6 +31,43 @@
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd: fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ dbvdd: fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "dbvdd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ spkvdd: fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "spkvdd-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+
+ rtc@101E0000 {
+ status = "okay";
+ };
+
mmc@12200000 {
status = "okay";
broken-cd;
@@ -120,4 +157,220 @@
reg = <0x50>;
};
};
+
+ hsi2c_4: i2c@12CA0000 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "tsp_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "tsp_io";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1.0v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_1.8v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2.8v_ldo";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_vmem";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8db792b..e3329af 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos5420.h>
#include "exynos5.dtsi"
#include "exynos5420-pinctrl.dtsi"
@@ -119,7 +120,8 @@
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
- clocks = <&clock 1>, <&clock 5>, <&clock 148>, <&clock 149>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+ <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
@@ -127,7 +129,7 @@
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
- clocks = <&clock 401>;
+ clocks = <&clock CLK_MFC>;
clock-names = "mfc";
};
@@ -137,7 +139,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x2000>;
- clocks = <&clock 351>, <&clock 132>;
+ clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
@@ -149,7 +151,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x2000>;
- clocks = <&clock 352>, <&clock 133>;
+ clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
@@ -161,7 +163,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
- clocks = <&clock 353>, <&clock 134>;
+ clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
@@ -175,7 +177,7 @@
interrupt-parent = <&mct_map>;
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
<8>, <9>, <10>, <11>;
- clocks = <&clock 1>, <&clock 315>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
@@ -269,9 +271,9 @@
};
rtc@101E0000 {
- clocks = <&clock 317>;
+ clocks = <&clock CLK_RTC>;
clock-names = "rtc";
- status = "okay";
+ status = "disabled";
};
amba {
@@ -281,11 +283,22 @@
interrupt-parent = <&gic>;
ranges;
+ adma: adma@03880000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x03880000 0x1000>;
+ interrupts = <0 110 0>;
+ clocks = <&clock_audss EXYNOS_ADMA>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <6>;
+ #dma-requests = <16>;
+ };
+
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
- clocks = <&clock 362>;
+ clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -296,7 +309,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
- clocks = <&clock 363>;
+ clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -307,7 +320,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
- clocks = <&clock 473>;
+ clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -318,7 +331,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
- clocks = <&clock 442>;
+ clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
@@ -326,6 +339,49 @@
};
};
+ i2s0: i2s@03830000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x03830000 0x100>;
+ dmas = <&adma 0
+ &adma 2
+ &adma 1>;
+ dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+ samsung,idma-addr = <0x03000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ status = "disabled";
+ };
+
+ i2s1: i2s@12D60000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x12D60000 0x100>;
+ dmas = <&pdma1 12
+ &pdma1 11>;
+ dma-names = "tx", "rx";
+ clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+ clock-names = "iis", "i2s_opclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
+ status = "disabled";
+ };
+
+ i2s2: i2s@12D70000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x12D70000 0x100>;
+ dmas = <&pdma0 12
+ &pdma0 11>;
+ dma-names = "tx", "rx";
+ clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+ clock-names = "iis", "i2s_opclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_bus>;
+ status = "disabled";
+ };
+
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
@@ -337,7 +393,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
- clocks = <&clock 271>, <&clock 135>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -353,7 +409,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
- clocks = <&clock 272>, <&clock 136>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -369,28 +425,28 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
- clocks = <&clock 273>, <&clock 137>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
serial@12C00000 {
- clocks = <&clock 257>, <&clock 128>;
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
- clocks = <&clock 258>, <&clock 129>;
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
- clocks = <&clock 259>, <&clock 130>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
- clocks = <&clock 260>, <&clock 131>;
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -399,7 +455,7 @@
reg = <0x12dd0000 0x100>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
- clocks = <&clock 279>;
+ clocks = <&clock CLK_PWM>;
clock-names = "timers";
};
@@ -410,7 +466,7 @@
};
dp-controller@145B0000 {
- clocks = <&clock 412>;
+ clocks = <&clock CLK_DP1>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
@@ -418,7 +474,7 @@
fimd@14400000 {
samsung,power-domain = <&disp_pd>;
- clocks = <&clock 147>, <&clock 421>;
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
@@ -426,7 +482,7 @@
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>, <0x10040720 0x4>;
interrupts = <0 106 0>;
- clocks = <&clock 270>;
+ clocks = <&clock CLK_TSADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
@@ -439,7 +495,7 @@
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 261>;
+ clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
@@ -452,7 +508,7 @@
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 262>;
+ clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
@@ -465,7 +521,7 @@
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 263>;
+ clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
@@ -478,7 +534,7 @@
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 264>;
+ clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
@@ -493,7 +549,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c4_hs_bus>;
- clocks = <&clock 265>;
+ clocks = <&clock CLK_I2C4>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -506,7 +562,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c5_hs_bus>;
- clocks = <&clock 266>;
+ clocks = <&clock CLK_I2C5>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -519,7 +575,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c6_hs_bus>;
- clocks = <&clock 267>;
+ clocks = <&clock CLK_I2C6>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -532,7 +588,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c7_hs_bus>;
- clocks = <&clock 268>;
+ clocks = <&clock CLK_I2C7>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -545,7 +601,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c8_hs_bus>;
- clocks = <&clock 281>;
+ clocks = <&clock CLK_I2C8>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -558,7 +614,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c9_hs_bus>;
- clocks = <&clock 282>;
+ clocks = <&clock CLK_I2C9>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -571,7 +627,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c10_hs_bus>;
- clocks = <&clock 283>;
+ clocks = <&clock CLK_I2C10>;
clock-names = "hsi2c";
status = "disabled";
};
@@ -580,8 +636,9 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
- clocks = <&clock 413>, <&clock 143>, <&clock 768>,
- <&clock 158>, <&clock 640>;
+ clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+ <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+ <&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
status = "disabled";
@@ -591,7 +648,7 @@
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
- clocks = <&clock 431>, <&clock 143>;
+ clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
};
@@ -599,7 +656,7 @@
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
- clocks = <&clock 465>;
+ clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
samsung,power-domain = <&gsc_pd>;
};
@@ -608,16 +665,21 @@
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
- clocks = <&clock 466>;
+ clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
samsung,power-domain = <&gsc_pd>;
};
+ pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5420-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+ };
+
tmu_cpu0: tmu@10060000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
- clocks = <&clock 318>;
+ clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
};
@@ -625,7 +687,7 @@
compatible = "samsung,exynos5420-tmu";
reg = <0x10064000 0x100>;
interrupts = <0 183 0>;
- clocks = <&clock 318>;
+ clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
};
@@ -633,7 +695,7 @@
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
interrupts = <0 184 0>;
- clocks = <&clock 318>, <&clock 318>;
+ clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
@@ -641,7 +703,7 @@
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
interrupts = <0 185 0>;
- clocks = <&clock 318>, <&clock 319>;
+ clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
@@ -649,7 +711,16 @@
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x100a0000 0x100>, <0x10068000 0x4>;
interrupts = <0 215 0>;
- clocks = <&clock 319>, <&clock 318>;
+ clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
};
+
+ watchdog@101D0000 {
+ compatible = "samsung,exynos5420-wdt";
+ reg = <0x101D0000 0x100>;
+ interrupts = <0 42 0>;
+ clocks = <&clock CLK_WDT>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ };
};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 02a0a12..75c7b89 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -9,6 +9,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/exynos5440.h>
#include "skeleton.dtsi"
/ {
@@ -105,7 +106,7 @@
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
- clocks = <&clock 21>, <&clock 21>;
+ clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -113,7 +114,7 @@
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
- clocks = <&clock 21>, <&clock 21>;
+ clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -125,7 +126,7 @@
#size-cells = <0>;
samsung,spi-src-clk = <0>;
num-cs = <1>;
- clocks = <&clock 21>, <&clock 16>;
+ clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
clock-names = "spi", "spi_busclk0";
};
@@ -161,7 +162,7 @@
interrupts = <0 5 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "i2c";
};
@@ -171,7 +172,7 @@
interrupts = <0 6 0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "i2c";
};
@@ -179,7 +180,7 @@
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
interrupts = <0 1 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "watchdog";
};
@@ -190,7 +191,7 @@
interrupts = <0 31 4>;
interrupt-names = "macirq";
phy-mode = "sgmii";
- clocks = <&clock 25>;
+ clocks = <&clock CLK_GMAC0>;
clock-names = "stmmaceth";
};
@@ -206,7 +207,7 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
interrupts = <0 17 0>, <0 16 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "rtc";
};
@@ -214,7 +215,7 @@
compatible = "samsung,exynos5440-tmu";
reg = <0x160118 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
};
@@ -222,7 +223,7 @@
compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
};
@@ -230,7 +231,7 @@
compatible = "samsung,exynos5440-tmu";
reg = <0x160120 0x230>, <0x160368 0x10>;
interrupts = <0 58 0>;
- clocks = <&clock 21>;
+ clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
};
@@ -238,7 +239,7 @@
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
interrupts = <0 30 0>;
- clocks = <&clock 23>;
+ clocks = <&clock CLK_SATA>;
clock-names = "sata";
};
@@ -246,7 +247,7 @@
compatible = "samsung,exynos5440-ohci";
reg = <0x220000 0x1000>;
interrupts = <0 29 0>;
- clocks = <&clock 24>;
+ clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -254,7 +255,7 @@
compatible = "samsung,exynos5440-ehci";
reg = <0x221000 0x1000>;
interrupts = <0 29 0>;
- clocks = <&clock 24>;
+ clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -264,7 +265,7 @@
0x270000 0x1000
0x271000 0x40>;
interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
- clocks = <&clock 28>, <&clock 27>;
+ clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
#size-cells = <2>;
@@ -285,7 +286,7 @@
0x272000 0x1000
0x271040 0x40>;
interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
- clocks = <&clock 29>, <&clock 27>;
+ clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
#size-cells = <2>;
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 1f026ad..a33f66c 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -127,17 +127,21 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
- reg_lcd_3v3: lcd-3v3 {
+ reg_lcd_3v3: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 526bfdb..7e6eef2 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -100,9 +100,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index cb64e2b..455169e 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -66,9 +66,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 581b754..bbcfb5a 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -23,6 +23,7 @@
serial1 = &auart1;
spi0 = &ssp0;
spi1 = &ssp1;
+ usbphy0 = &usbphy0;
};
cpus {
@@ -428,7 +429,7 @@
status = "disabled";
};
- lradc@80050000 {
+ lradc: lradc@80050000 {
compatible = "fsl,imx23-lradc";
reg = <0x80050000 0x2000>;
interrupts = <36 37 38 39 40 41 42 43 44>;
@@ -526,4 +527,9 @@
status = "disabled";
};
};
+
+ iio_hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&lradc 8>;
+ };
};
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
new file mode 100644
index 0000000..d6f2764
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX25";
+ compatible = "eukrea,cpuimx25", "fsl,imx25";
+
+ memory {
+ reg = <0x80000000 0x4000000>; /* 64M */
+ };
+};
+
+&fec {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ imx25-eukrea-cpuimx25 {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
+ MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
+ >;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
new file mode 100644
index 0000000..62fb3da
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -0,0 +1,174 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25-eukrea-cpuimx25.dtsi"
+
+/ {
+ model = "Eukrea MBIMXSD25";
+ compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ bp1 {
+ label = "BP1";
+ gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sound {
+ compatible = "eukrea,asoc-tlv320";
+ eukrea,model = "imx25-eukrea-tlv320aic23";
+ ssi-controller = <&ssi1>;
+ fsl,mux-int-port = <1>;
+ fsl,mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio1 20>;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ imx25-eukrea-mbimxsd25-baseboard {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0
+ MX25_PAD_KPP_COL2__AUD5_TXC 0xe0
+ MX25_PAD_KPP_COL1__AUD5_RXD 0xe0
+ MX25_PAD_KPP_COL0__AUD5_TXD 0xe0
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX25_PAD_SD1_CMD__SD1_CMD 0x400000c0
+ MX25_PAD_SD1_CLK__SD1_CLK 0x400000c0
+ MX25_PAD_SD1_DATA0__SD1_DATA0 0x400000c0
+ MX25_PAD_SD1_DATA1__SD1_DATA1 0x400000c0
+ MX25_PAD_SD1_DATA2__SD1_DATA2 0x400000c0
+ MX25_PAD_SD1_DATA3__SD1_DATA3 0x400000c0
+ >;
+ };
+
+ pinctrl_gpiokeys: gpiokeysgrp {
+ fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
+ };
+
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
+ };
+
+ pinctrl_lcdc: lcdcgrp {
+ fsl,pins = <
+ MX25_PAD_LD0__LD0 0x1
+ MX25_PAD_LD1__LD1 0x1
+ MX25_PAD_LD2__LD2 0x1
+ MX25_PAD_LD3__LD3 0x1
+ MX25_PAD_LD4__LD4 0x1
+ MX25_PAD_LD5__LD5 0x1
+ MX25_PAD_LD6__LD6 0x1
+ MX25_PAD_LD7__LD7 0x1
+ MX25_PAD_LD8__LD8 0x1
+ MX25_PAD_LD9__LD9 0x1
+ MX25_PAD_LD10__LD10 0x1
+ MX25_PAD_LD11__LD11 0x1
+ MX25_PAD_LD12__LD12 0x1
+ MX25_PAD_LD13__LD13 0x1
+ MX25_PAD_LD14__LD14 0x1
+ MX25_PAD_LD15__LD15 0x1
+ MX25_PAD_GPIO_E__LD16 0x1
+ MX25_PAD_GPIO_F__LD17 0x1
+ MX25_PAD_HSYNC__HSYNC 0x80000000
+ MX25_PAD_VSYNC__VSYNC 0x80000000
+ MX25_PAD_LSCLK__LSCLK 0x80000000
+ MX25_PAD_OE_ACD__OE_ACD 0x80000000
+ MX25_PAD_CONTRAST__CONTRAST 0x80000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX25_PAD_UART1_RTS__UART1_RTS 0xe0
+ MX25_PAD_UART1_CTS__UART1_CTS 0xe0
+ MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+ MX25_PAD_UART1_RXD__UART1_RXD 0xc0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX25_PAD_UART2_RXD__UART2_RXD 0x80000000
+ MX25_PAD_UART2_TXD__UART2_TXD 0x80000000
+ MX25_PAD_UART2_RTS__UART2_RTS 0x80000000
+ MX25_PAD_UART2_CTS__UART2_CTS 0x80000000
+ >;
+ };
+ };
+};
+
+&ssi1 {
+ codec-handle = <&tlv320aic23>;
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
new file mode 100644
index 0000000..9238a95
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -0,0 +1,494 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Based on imx35-pinfunc.h in the same directory Which is:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX25_PINFUNC_H
+#define __DTS_IMX25_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000
+#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000
+#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000
+
+#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000
+#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000
+
+#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000
+#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000
+
+#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000
+#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000
+#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000
+
+#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000
+#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000
+
+#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000
+#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000
+#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000
+
+#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000
+#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000
+
+#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000
+#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000
+
+#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000
+#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000
+#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000
+
+#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000
+#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000
+
+#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000
+#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x15 0x000
+#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x17 0x000
+
+#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x10 0x000
+#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x14 0x000
+#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x15 0x000
+
+#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x10 0x000
+#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x14 0x000
+#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x15 0x000
+
+#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x10 0x000
+#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x14 0x000
+#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x15 0x000
+
+#define MX25_PAD_CS0__CS0 0x04c 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS0__GPIO_4_2 0x04c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS1__CS1 0x050 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS1__NF_CE3 0x050 0x000 0x000 0x01 0x000
+#define MX25_PAD_CS1__GPIO_4_3 0x050 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000
+#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x13 0x000
+#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x15 0x000
+
+#define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x10 0x000
+#define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000
+#define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x13 0x000
+#define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x15 0x000
+
+#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x10 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000
+
+#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000
+#define MX25_PAD_ECB__UART5_TXD_MUX 0x060 0x270 0x000 0x13 0x000
+#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000
+
+#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000
+#define MX25_PAD_LBA__UART5_RXD_MUX 0x064 0x274 0x578 0x13 0x000
+#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000
+
+#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000
+#define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x10 0x000
+#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x14 0x000
+#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x15 0x000
+
+#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x10 0x000
+#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x15 0x000
+
+#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000
+#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000
+#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000
+
+#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000
+#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000
+#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000
+
+#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000
+#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000
+#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000
+
+#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000
+#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000
+
+#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000
+#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000
+
+#define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000
+#define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000
+#define MX25_PAD_D10__USBOTG_OC 0x09c 0x294 0x57c 0x06 0x000
+
+#define MX25_PAD_D9__D9 0x0a0 0x298 0x000 0x00 0x000
+#define MX25_PAD_D9__GPIO_4_11 0x0a0 0x298 0x000 0x05 0x000
+#define MX25_PAD_D9__USBH2_PWR 0x0a0 0x298 0x000 0x06 0x000
+
+#define MX25_PAD_D8__D8 0x0a4 0x29c 0x000 0x00 0x000
+#define MX25_PAD_D8__GPIO_4_12 0x0a4 0x29c 0x000 0x05 0x000
+#define MX25_PAD_D8__USBH2_OC 0x0a4 0x29c 0x580 0x06 0x000
+
+#define MX25_PAD_D7__D7 0x0a8 0x2a0 0x000 0x00 0x000
+#define MX25_PAD_D7__GPIO_4_13 0x0a8 0x2a0 0x000 0x05 0x000
+
+#define MX25_PAD_D6__D6 0x0ac 0x2a4 0x000 0x00 0x000
+#define MX25_PAD_D6__GPIO_4_14 0x0ac 0x2a4 0x000 0x05 0x000
+
+#define MX25_PAD_D5__D5 0x0b0 0x2a8 0x000 0x00 0x000
+#define MX25_PAD_D5__GPIO_4_15 0x0b0 0x2a8 0x000 0x05 0x000
+
+#define MX25_PAD_D4__D4 0x0b4 0x2ac 0x000 0x00 0x000
+#define MX25_PAD_D4__GPIO_4_16 0x0b4 0x2ac 0x000 0x05 0x000
+
+#define MX25_PAD_D3__D3 0x0b8 0x2b0 0x000 0x00 0x000
+#define MX25_PAD_D3__GPIO_4_17 0x0b8 0x2b0 0x000 0x05 0x000
+
+#define MX25_PAD_D2__D2 0x0bc 0x2b4 0x000 0x00 0x000
+#define MX25_PAD_D2__GPIO_4_18 0x0bc 0x2b4 0x000 0x05 0x000
+
+#define MX25_PAD_D1__D1 0x0c0 0x2b8 0x000 0x00 0x000
+#define MX25_PAD_D1__GPIO_4_19 0x0c0 0x2b8 0x000 0x05 0x000
+
+#define MX25_PAD_D0__D0 0x0c4 0x2bc 0x000 0x00 0x000
+#define MX25_PAD_D0__GPIO_4_20 0x0c4 0x2bc 0x000 0x05 0x000
+
+#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x10 0x000
+#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x12 0x000
+#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x15 0x000
+
+#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x10 0x000
+#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x12 0x000
+#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x15 0x000
+
+#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x10 0x000
+#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x15 0x000
+
+#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x10 0x000
+#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x15 0x000
+
+#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x10 0x000
+#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x15 0x000
+
+#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x10 0x000
+#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x15 0x000
+
+#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x10 0x000
+#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x15 0x000
+
+#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x10 0x000
+#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000
+
+#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000
+
+#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000
+#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001
+
+#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000
+#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001
+
+#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000
+#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001
+
+#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001
+
+#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000
+
+#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000
+
+#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001
+
+#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x15 0x000
+
+#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x10 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x15 0x000
+
+#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x10 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000
+
+#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000
+
+#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001
+
+#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000
+#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000
+#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001
+
+#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001
+
+#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000
+#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x10 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x10 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22 0x170 0x368 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD 0x174 0x36c 0x000 0x10 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23 0x174 0x36c 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001
+#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1 0x17c 0x374 0x48c 0x11 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x10 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002
+#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002
+#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000
+#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x13 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30 0x1ac 0x3a4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002
+#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX 0x1b8 0x3b0 0x570 0x11 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX 0x1bc 0x3b4 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x12 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x12 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x12 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x15 0x000
+
+#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x10 0x000
+#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x11 0x000
+#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x15 0x000
+
+#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000
+#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000
+
+#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
+
+#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000
+
+#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000
+#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
+#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001
+
+#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000
+
+#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001
+
+#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000
+
+#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x10 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000
+
+#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000
+#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000
+
+#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 737ed5d..32f760e 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -10,6 +10,7 @@
*/
#include "skeleton.dtsi"
+#include "imx25-pinfunc.h"
/ {
aliases {
@@ -173,12 +174,12 @@
status = "disabled";
};
- iomuxc@43fac000{
+ iomuxc: iomuxc@43fac000 {
compatible = "fsl,imx25-iomuxc";
reg = <0x43fac000 0x4000>;
};
- audmux@43fb0000 {
+ audmux: audmux@43fb0000 {
compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
reg = <0x43fb0000 0x4000>;
status = "disabled";
@@ -236,6 +237,11 @@
compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <11>;
+ clocks = <&clks 118>;
+ clock-names = "ipg";
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -266,6 +272,11 @@
compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
reg = <0x50034000 0x4000>;
interrupts = <12>;
+ clocks = <&clks 117>;
+ clock-names = "ipg";
+ dmas = <&sdma 28 1 0>,
+ <&sdma 29 1 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -436,13 +447,14 @@
#interrupt-cells = <2>;
};
- sdma@53fd4000 {
+ sdma: sdma@53fd4000 {
compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
reg = <0x53fd4000 0x4000>;
clocks = <&clks 112>, <&clks 68>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
interrupts = <34>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
};
wdog@53fdc000 {
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
index ba4c6df..09f57b3 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -34,11 +34,49 @@
};
};
+&iomuxc {
+ imx27-apf27 {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ >;
+ };
+ };
+};
+
&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 47c8c26..2b6d489 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -22,10 +22,10 @@
bits-per-pixel = <16>; /* non-standard but required */
fsl,pcr = <0xfae80083>; /* non-standard but required */
display-timings {
- timing0: 640x480 {
+ timing0: 800x480 {
clock-frequency = <33000033>;
hactive = <800>;
- vactive = <640>;
+ vactive = <480>;
hback-porch = <96>;
hfront-porch = <96>;
vback-porch = <20>;
@@ -38,20 +38,24 @@
gpio-keys {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
user-key {
label = "user";
- gpios = <&gpio6 13 0>;
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
linux,code = <276>; /* BTN_EXTRA */
};
};
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
user {
label = "Heartbeat";
- gpios = <&gpio6 14 0>;
+ gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@@ -59,25 +63,34 @@
&cspi1 {
fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio4 28 1>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
status = "okay";
};
&cspi2 {
fsl,spi-num-chipselects = <3>;
- cs-gpios = <&gpio4 21 1>, <&gpio4 27 1>,
- <&gpio2 17 1>;
+ cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
+ <&gpio4 27 GPIO_ACTIVE_LOW>,
+ <&gpio2 17 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
status = "okay";
};
&fb {
display = <&display>;
fsl,dmacr = <0x00020010>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_imxfb1>;
status = "okay";
};
&i2c1 {
clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
rtc@68 {
@@ -87,5 +100,127 @@
};
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
+
+&iomuxc {
+ imx27-apf27dev {
+ pinctrl_cspi1: cspi1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+ MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+ >;
+ };
+
+ pinctrl_cspi1_cs: cspi1csgrp {
+ fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
+ };
+
+ pinctrl_cspi2: cspi2grp {
+ fsl,pins = <
+ MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+ MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+ MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+ >;
+ };
+
+ pinctrl_cspi2_cs: cspi2csgrp {
+ fsl,pins = <
+ MX27_PAD_CSI_D5__GPIO2_17 0x0
+ MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
+ MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
+ };
+
+ pinctrl_imxfb1: imxfbgrp {
+ fsl,pins = <
+ MX27_PAD_CLS__CLS 0x0
+ MX27_PAD_CONTRAST__CONTRAST 0x0
+ MX27_PAD_LD0__LD0 0x0
+ MX27_PAD_LD1__LD1 0x0
+ MX27_PAD_LD2__LD2 0x0
+ MX27_PAD_LD3__LD3 0x0
+ MX27_PAD_LD4__LD4 0x0
+ MX27_PAD_LD5__LD5 0x0
+ MX27_PAD_LD6__LD6 0x0
+ MX27_PAD_LD7__LD7 0x0
+ MX27_PAD_LD8__LD8 0x0
+ MX27_PAD_LD9__LD9 0x0
+ MX27_PAD_LD10__LD10 0x0
+ MX27_PAD_LD11__LD11 0x0
+ MX27_PAD_LD12__LD12 0x0
+ MX27_PAD_LD13__LD13 0x0
+ MX27_PAD_LD14__LD14 0x0
+ MX27_PAD_LD15__LD15 0x0
+ MX27_PAD_LD16__LD16 0x0
+ MX27_PAD_LD17__LD17 0x0
+ MX27_PAD_LSCLK__LSCLK 0x0
+ MX27_PAD_OE_ACD__OE_ACD 0x0
+ MX27_PAD_PS__PS 0x0
+ MX27_PAD_REV__REV 0x0
+ MX27_PAD_SPL_SPR__SPL_SPR 0x0
+ MX27_PAD_HSYNC__HSYNC 0x0
+ MX27_PAD_VSYNC__VSYNC 0x0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+
+ pinctrl_pwm: pwmgrp {
+ fsl,pins = <
+ MX27_PAD_PWMO__PWMO 0x0
+ >;
+ };
+
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ >;
+ };
+
+ pinctrl_sdhc2_cd: sdhc2cdgrp {
+ fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
+ };
+ };
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm>;
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 5a31c77..3c3964a 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -9,7 +9,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-#include "imx27-phytec-phycard-s-som.dts"
+#include "imx27-phytec-phycard-s-som.dtsi"
/ {
model = "Phytec pca100 rapid development kit";
@@ -37,9 +37,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3v3: 3v3 {
+ reg_3v3: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -54,6 +57,8 @@
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
rtc@51 {
@@ -68,26 +73,92 @@
};
};
+&iomuxc {
+ imx27-phycard-s-rdk {
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+
+ pinctrl_owire1: owire1grp {
+ fsl,pins = <
+ MX27_PAD_RTCK__OWIRE 0x0
+ >;
+ };
+
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX27_PAD_UART3_TXD__UART3_TXD 0x0
+ MX27_PAD_UART3_RXD__UART3_RXD 0x0
+ MX27_PAD_UART3_CTS__UART3_CTS 0x0
+ MX27_PAD_UART3_RTS__UART3_RTS 0x0
+ >;
+ };
+ };
+};
+
&owire {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_owire1>;
status = "okay";
};
&sdhci2 {
- cd-gpios = <&gpio3 29 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc2>;
+ cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart1 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
deleted file mode 100644
index c8d57d1..0000000
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
- model = "Phytec pca100";
- compatible = "phytec,imx27-pca100", "fsl,imx27";
-
- memory {
- reg = <0xa0000000 0x08000000>; /* 128MB */
- };
-};
-
-&cspi1 {
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 28 0>,
- <&gpio4 27 0>;
- status = "okay";
-};
-
-&fec {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-
- at24@52 {
- compatible = "at,24c32";
- pagesize = <32>;
- reg = <0x52>;
- };
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 0000000..1b62480
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+ model = "Phytec pca100";
+ compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+ memory {
+ reg = <0xa0000000 0x08000000>; /* 128MB */
+ };
+};
+
+&cspi1 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+ <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ at24@52 {
+ compatible = "at,24c32";
+ pagesize = <32>;
+ reg = <0x52>;
+ };
+};
+
+&iomuxc {
+ imx27-phycard-s-som {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 0fc6551..df3b2e7 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -7,7 +7,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-#include "imx27-phytec-phycore-som.dts"
+#include "imx27-phytec-phycore-som.dtsi"
/ {
model = "Phytec pcm970";
@@ -16,32 +16,200 @@
&cspi1 {
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+ <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ camgpio: pca9536@41 {
+ compatible = "nxp,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&iomuxc {
+ imx27_phycore_rdk {
+ pinctrl_i2c1: i2c1grp {
+ /* Add pullup to DATA line */
+ fsl,pins = <
+ MX27_PAD_I2C_DATA__I2C_DATA 0x1
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+ >;
+ };
+
+ pinctrl_owire1: owire1grp {
+ fsl,pins = <
+ MX27_PAD_RTCK__OWIRE 0x0
+ >;
+ };
+
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ MX27_PAD_SSI3_FS__GPIO3_28 0x0 /* WP */
+ MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
+
+ pinctrl_usbh2: usbh2grp {
+ fsl,pins = <
+ MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+ MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+ MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+ MX27_PAD_USBH2_STP__USBH2_STP 0x0
+ MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+ MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+ MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+ MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+ MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+ MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+ MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+ MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+ >;
+ };
+
+ pinctrl_weim: weimgrp {
+ fsl,pins = <
+ MX27_PAD_CS4_B__CS4_B 0x0 /* CS4 */
+ MX27_PAD_SD1_D1__GPIO5_19 0x0 /* CAN IRQ */
+ >;
+ };
+ };
+};
+
+&owire {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_owire1>;
+ status = "okay";
+};
+
+&pmicleds {
+ ledr1: led@3 {
+ reg = <3>;
+ label = "system:red1:user";
+ };
+
+ ledg1: led@4 {
+ reg = <4>;
+ label = "system:green1:user";
+ };
+
+ ledb1: led@5 {
+ reg = <5>;
+ label = "system:blue1:user";
+ };
+
+ ledr2: led@6 {
+ reg = <6>;
+ label = "system:red2:user";
+ };
+
+ ledg2: led@7 {
+ reg = <7>;
+ label = "system:green2:user";
+ };
+
+ ledb2: led@8 {
+ reg = <8>;
+ label = "system:blue2:user";
+ };
+
+ ledr3: led@9 {
+ reg = <9>;
+ label = "system:red3:nand";
+ linux,default-trigger = "nand-disk";
+ };
+
+ ledg3: led@10 {
+ reg = <10>;
+ label = "system:green3:live";
+ linux,default-trigger = "heartbeat";
+ };
+
+ ledb3: led@11 {
+ reg = <11>;
+ label = "system:blue3:cpu";
+ linux,default-trigger = "cpu0";
+ };
};
&sdhci2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc2>;
bus-width = <4>;
- cd-gpios = <&gpio3 29 0>;
- wp-gpios = <&gpio3 28 0>;
+ cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&vmmc1_reg>;
status = "okay";
};
&uart1 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
};
&uart2 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
+&usbh2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh2>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ vbus-supply = <®_5v0>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbphy2 {
+ vcc-supply = <®_5v0>;
+};
+
&weim {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_weim>;
+
can@d4000000 {
compatible = "nxp,sja1000";
reg = <4 0x00000000 0x00000100>;
interrupt-parent = <&gpio5>;
- interrupts = <19 0x2>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
nxp,external-clock-frequency = <16000000>;
nxp,tx-output-config = <0x16>;
nxp,no-comparator-bypass;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
deleted file mode 100644
index 4ec402c..0000000
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
- model = "Phytec pcm038";
- compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
- memory {
- reg = <0xa0000000 0x08000000>;
- };
-};
-
-&audmux {
- status = "okay";
-
- /* SSI0 <=> PINS_4 (MC13783 Audio) */
- ssi0 {
- fsl,audmux-port = <0>;
- fsl,port-config = <0xcb205000>;
- };
-
- pins4 {
- fsl,audmux-port = <2>;
- fsl,port-config = <0x00001000>;
- };
-};
-
-&cspi1 {
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio4 28 0>;
- status = "okay";
-
- pmic: mc13783@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mc13783";
- spi-max-frequency = <20000000>;
- reg = <0>;
- interrupt-parent = <&gpio2>;
- interrupts = <23 0x4>;
- fsl,mc13xxx-uses-adc;
- fsl,mc13xxx-uses-rtc;
-
- regulators {
- /* SW1A and SW1B joined operation */
- sw1_reg: sw1a {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1520000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- /* SW2A and SW2B joined operation */
- sw2_reg: sw2a {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- sw3_reg: sw3 {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vaudio_reg: vaudio {
- regulator-always-on;
- regulator-boot-on;
- };
-
- violo_reg: violo {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- viohi_reg: viohi {
- regulator-always-on;
- regulator-boot-on;
- };
-
- vgen_reg: vgen {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcam_reg: vcam {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- vrf1_reg: vrf1 {
- regulator-min-microvolt = <2775000>;
- regulator-max-microvolt = <2775000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vrf2_reg: vrf2 {
- regulator-min-microvolt = <2775000>;
- regulator-max-microvolt = <2775000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vmmc1_reg: vmmc1 {
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3000000>;
- };
-
- gpo1_reg: gpo1 { };
-
- pwgt1spi_reg: pwgt1spi {
- regulator-always-on;
- };
- };
- };
-};
-
-&fec {
- phy-reset-gpios = <&gpio3 30 0>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <400000>;
- status = "okay";
-
- at24@52 {
- compatible = "at,24c32";
- pagesize = <32>;
- reg = <0x52>;
- };
-
- pcf8563@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-
- lm75@4a {
- compatible = "national,lm75";
- reg = <0x4a>;
- };
-};
-
-&nfc {
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&weim {
- status = "okay";
-
- nor: nor@c0000000 {
- compatible = "cfi-flash";
- reg = <0 0x00000000 0x02000000>;
- bank-width = <2>;
- linux,mtd-name = "physmap-flash.0";
- fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- sram: sram@c8000000 {
- compatible = "mtd-ram";
- reg = <1 0x00000000 0x00800000>;
- bank-width = <2>;
- linux,mtd-name = "mtd-ram.0";
- fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
new file mode 100644
index 0000000..cefaa69
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -0,0 +1,317 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+ model = "Phytec pcm038";
+ compatible = "phytec,imx27-pcm038", "fsl,imx27";
+
+ memory {
+ reg = <0xa0000000 0x08000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3v3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+ };
+};
+
+&audmux {
+ status = "okay";
+
+ /* SSI0 <=> PINS_4 (MC13783 Audio) */
+ ssi0 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <0xcb205000>;
+ };
+
+ pins4 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <0x00001000>;
+ };
+};
+
+&cspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi1>;
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ pmic: mc13783@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13783";
+ reg = <0>;
+ spi-cs-high;
+ spi-max-frequency = <20000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,mc13xxx-uses-adc;
+ fsl,mc13xxx-uses-rtc;
+
+ pmicleds: leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
+ };
+
+ regulators {
+ /* SW1A and SW1B joined operation */
+ sw1_reg: sw1a {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1520000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* SW2A and SW2B joined operation */
+ sw2_reg: sw2a {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vaudio_reg: vaudio {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ violo_reg: violo {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ viohi_reg: viohi {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vgen_reg: vgen {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcam_reg: vcam {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vrf1_reg: vrf1 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vrf2_reg: vrf2 {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vmmc1_reg: vmmc1 {
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ gpo1_reg: gpo1 { };
+
+ pwgt1spi_reg: pwgt1spi {
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&fec {
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ phy-supply = <®_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ at24@52 {
+ compatible = "at,24c32";
+ pagesize = <32>;
+ reg = <0x52>;
+ };
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ lm75@4a {
+ compatible = "national,lm75";
+ reg = <0x4a>;
+ };
+};
+
+&iomuxc {
+ imx27_phycore_som {
+ pinctrl_cspi1: cspi1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+ MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+ MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */
+ MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ MX27_PAD_SSI3_TXDAT__GPIO3_30 0x0 /* FEC RST */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+ MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+ MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+ MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+ MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+ MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+ MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+ MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+ MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+ MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+ MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+ MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+ >;
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ dr_mode = "otg";
+ phy_type = "ulpi";
+ vbus-supply = <&sw3_reg>;
+ status = "okay";
+};
+
+&usbphy0 {
+ vcc-supply = <&sw3_reg>;
+};
+
+&weim {
+ status = "okay";
+
+ nor: nor@c0000000 {
+ compatible = "cfi-flash";
+ reg = <0 0x00000000 0x02000000>;
+ bank-width = <2>;
+ linux,mtd-name = "physmap-flash.0";
+ fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ sram: sram@c8000000 {
+ compatible = "mtd-ram";
+ reg = <1 0x00000000 0x00800000>;
+ bank-width = <2>;
+ linux,mtd-name = "mtd-ram.0";
+ fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h
new file mode 100644
index 0000000..f5387b4
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-pinfunc.h
@@ -0,0 +1,526 @@
+/*
+ * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_IMX27_PINFUNC_H
+#define __DTS_IMX27_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function: 0 - Primary function
+ * 1 - Alternate function
+ * 2 - GPIO
+ * direction: 0 - Input
+ * 1 - Output
+ * gpio_oconf: 0 - A_IN
+ * 1 - B_IN
+ * 2 - C_IN
+ * 3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ * 1 - Interrupt Status Register
+ * 2 - 0
+ * 3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX27_PAD_USBH2_CLK__USBH2_CLK 0x00 0x000
+#define MX27_PAD_USBH2_CLK__GPIO1_0 0x00 0x032
+#define MX27_PAD_USBH2_DIR__USBH2_DIR 0x01 0x000
+#define MX27_PAD_USBH2_DIR__GPIO1_1 0x01 0x032
+#define MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x02 0x004
+#define MX27_PAD_USBH2_DATA7__GPIO1_2 0x02 0x032
+#define MX27_PAD_USBH2_NXT__USBH2_NXT 0x03 0x000
+#define MX27_PAD_USBH2_NXT__GPIO1_3 0x03 0x032
+#define MX27_PAD_USBH2_STP__USBH2_STP 0x04 0x004
+#define MX27_PAD_USBH2_STP__GPIO1_4 0x04 0x032
+#define MX27_PAD_LSCLK__LSCLK 0x05 0x004
+#define MX27_PAD_LSCLK__GPIO1_5 0x05 0x032
+#define MX27_PAD_LD0__LD0 0x06 0x004
+#define MX27_PAD_LD0__GPIO1_6 0x06 0x032
+#define MX27_PAD_LD1__LD1 0x07 0x004
+#define MX27_PAD_LD1__GPIO1_7 0x07 0x032
+#define MX27_PAD_LD2__LD2 0x08 0x004
+#define MX27_PAD_LD2__GPIO1_8 0x08 0x032
+#define MX27_PAD_LD3__LD3 0x09 0x004
+#define MX27_PAD_LD3__GPIO1_9 0x09 0x032
+#define MX27_PAD_LD4__LD4 0x0a 0x004
+#define MX27_PAD_LD4__GPIO1_10 0x0a 0x032
+#define MX27_PAD_LD5__LD5 0x0b 0x004
+#define MX27_PAD_LD5__GPIO1_11 0x0b 0x032
+#define MX27_PAD_LD6__LD6 0x0c 0x004
+#define MX27_PAD_LD6__GPIO1_12 0x0c 0x032
+#define MX27_PAD_LD7__LD7 0x0d 0x004
+#define MX27_PAD_LD7__GPIO1_13 0x0d 0x032
+#define MX27_PAD_LD8__LD8 0x0e 0x004
+#define MX27_PAD_LD8__GPIO1_14 0x0e 0x032
+#define MX27_PAD_LD9__LD9 0x0f 0x004
+#define MX27_PAD_LD9__GPIO1_15 0x0f 0x032
+#define MX27_PAD_LD10__LD10 0x10 0x004
+#define MX27_PAD_LD10__GPIO1_16 0x10 0x032
+#define MX27_PAD_LD11__LD11 0x11 0x004
+#define MX27_PAD_LD11__GPIO1_17 0x11 0x032
+#define MX27_PAD_LD12__LD12 0x12 0x004
+#define MX27_PAD_LD12__GPIO1_18 0x12 0x032
+#define MX27_PAD_LD13__LD13 0x13 0x004
+#define MX27_PAD_LD13__GPIO1_19 0x13 0x032
+#define MX27_PAD_LD14__LD14 0x14 0x004
+#define MX27_PAD_LD14__GPIO1_20 0x14 0x032
+#define MX27_PAD_LD15__LD15 0x15 0x004
+#define MX27_PAD_LD15__GPIO1_21 0x15 0x032
+#define MX27_PAD_LD16__LD16 0x16 0x004
+#define MX27_PAD_LD16__GPIO1_22 0x16 0x032
+#define MX27_PAD_LD17__LD17 0x17 0x004
+#define MX27_PAD_LD17__GPIO1_23 0x17 0x032
+#define MX27_PAD_REV__REV 0x18 0x004
+#define MX27_PAD_REV__GPIO1_24 0x18 0x032
+#define MX27_PAD_CLS__CLS 0x19 0x004
+#define MX27_PAD_CLS__GPIO1_25 0x19 0x032
+#define MX27_PAD_PS__PS 0x1a 0x004
+#define MX27_PAD_PS__GPIO1_26 0x1a 0x032
+#define MX27_PAD_SPL_SPR__SPL_SPR 0x1b 0x004
+#define MX27_PAD_SPL_SPR__GPIO1_27 0x1b 0x032
+#define MX27_PAD_HSYNC__HSYNC 0x1c 0x004
+#define MX27_PAD_HSYNC__GPIO1_28 0x1c 0x032
+#define MX27_PAD_VSYNC__VSYNC 0x1d 0x004
+#define MX27_PAD_VSYNC__GPIO1_29 0x1d 0x032
+#define MX27_PAD_CONTRAST__CONTRAST 0x1e 0x004
+#define MX27_PAD_CONTRAST__GPIO1_30 0x1e 0x032
+#define MX27_PAD_OE_ACD__OE_ACD 0x1f 0x004
+#define MX27_PAD_OE_ACD__GPIO1_31 0x1f 0x032
+#define MX27_PAD_UNUSED0__UNUSED0 0x20 0x004
+#define MX27_PAD_UNUSED0__GPIO2_0 0x20 0x032
+#define MX27_PAD_UNUSED1__UNUSED1 0x21 0x004
+#define MX27_PAD_UNUSED1__GPIO2_1 0x21 0x032
+#define MX27_PAD_UNUSED2__UNUSED2 0x22 0x004
+#define MX27_PAD_UNUSED2__GPIO2_2 0x22 0x032
+#define MX27_PAD_UNUSED3__UNUSED3 0x23 0x004
+#define MX27_PAD_UNUSED3__GPIO2_3 0x23 0x032
+#define MX27_PAD_SD2_D0__SD2_D0 0x24 0x004
+#define MX27_PAD_SD2_D0__MSHC_DATA0 0x24 0x005
+#define MX27_PAD_SD2_D0__GPIO2_4 0x24 0x032
+#define MX27_PAD_SD2_D1__SD2_D1 0x25 0x004
+#define MX27_PAD_SD2_D1__MSHC_DATA1 0x25 0x005
+#define MX27_PAD_SD2_D1__GPIO2_5 0x25 0x032
+#define MX27_PAD_SD2_D2__SD2_D2 0x26 0x004
+#define MX27_PAD_SD2_D2__MSHC_DATA2 0x26 0x005
+#define MX27_PAD_SD2_D2__GPIO2_6 0x26 0x032
+#define MX27_PAD_SD2_D3__SD2_D3 0x27 0x004
+#define MX27_PAD_SD2_D3__MSHC_DATA3 0x27 0x005
+#define MX27_PAD_SD2_D3__GPIO2_7 0x27 0x032
+#define MX27_PAD_SD2_CMD__SD2_CMD 0x28 0x004
+#define MX27_PAD_SD2_CMD__MSHC_BS 0x28 0x005
+#define MX27_PAD_SD2_CMD__GPIO2_8 0x28 0x032
+#define MX27_PAD_SD2_CLK__SD2_CLK 0x29 0x004
+#define MX27_PAD_SD2_CLK__MSHC_SCLK 0x29 0x005
+#define MX27_PAD_SD2_CLK__GPIO2_9 0x29 0x032
+#define MX27_PAD_CSI_D0__CSI_D0 0x2a 0x000
+#define MX27_PAD_CSI_D0__UART6_TXD 0x2a 0x005
+#define MX27_PAD_CSI_D0__GPIO2_10 0x2a 0x032
+#define MX27_PAD_CSI_D1__CSI_D1 0x2b 0x000
+#define MX27_PAD_CSI_D1__UART6_RXD 0x2b 0x001
+#define MX27_PAD_CSI_D1__GPIO2_11 0x2b 0x032
+#define MX27_PAD_CSI_D2__CSI_D2 0x2c 0x000
+#define MX27_PAD_CSI_D2__UART6_CTS 0x2c 0x005
+#define MX27_PAD_CSI_D2__GPIO2_12 0x2c 0x032
+#define MX27_PAD_CSI_D3__CSI_D3 0x2d 0x000
+#define MX27_PAD_CSI_D3__UART6_RTS 0x2d 0x001
+#define MX27_PAD_CSI_D3__GPIO2_13 0x2d 0x032
+#define MX27_PAD_CSI_D4__CSI_D4 0x2e 0x000
+#define MX27_PAD_CSI_D4__GPIO2_14 0x2e 0x032
+#define MX27_PAD_CSI_MCLK__CSI_MCLK 0x2f 0x004
+#define MX27_PAD_CSI_MCLK__GPIO2_15 0x2f 0x032
+#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK 0x30 0x000
+#define MX27_PAD_CSI_PIXCLK__GPIO2_16 0x30 0x032
+#define MX27_PAD_CSI_D5__CSI_D5 0x31 0x000
+#define MX27_PAD_CSI_D5__GPIO2_17 0x31 0x032
+#define MX27_PAD_CSI_D6__CSI_D6 0x32 0x000
+#define MX27_PAD_CSI_D6__UART5_TXD 0x32 0x005
+#define MX27_PAD_CSI_D6__GPIO2_18 0x32 0x032
+#define MX27_PAD_CSI_D7__CSI_D7 0x33 0x000
+#define MX27_PAD_CSI_D7__UART5_RXD 0x33 0x001
+#define MX27_PAD_CSI_D7__GPIO2_19 0x33 0x032
+#define MX27_PAD_CSI_VSYNC__CSI_VSYNC 0x34 0x000
+#define MX27_PAD_CSI_VSYNC__UART5_CTS 0x34 0x005
+#define MX27_PAD_CSI_VSYNC__GPIO2_20 0x34 0x032
+#define MX27_PAD_CSI_HSYNC__CSI_HSYNC 0x35 0x000
+#define MX27_PAD_CSI_HSYNC__UART5_RTS 0x35 0x001
+#define MX27_PAD_CSI_HSYNC__GPIO2_21 0x35 0x032
+#define MX27_PAD_USBH1_SUSP__USBH1_SUSP 0x36 0x004
+#define MX27_PAD_USBH1_SUSP__GPIO2_22 0x36 0x032
+#define MX27_PAD_USB_PWR__USB_PWR 0x37 0x004
+#define MX27_PAD_USB_PWR__GPIO2_23 0x37 0x032
+#define MX27_PAD_USB_OC_B__USB_OC_B 0x38 0x000
+#define MX27_PAD_USB_OC_B__GPIO2_24 0x38 0x032
+#define MX27_PAD_USBH1_RCV__USBH1_RCV 0x39 0x004
+#define MX27_PAD_USBH1_RCV__GPIO2_25 0x39 0x032
+#define MX27_PAD_USBH1_FS__USBH1_FS 0x3a 0x004
+#define MX27_PAD_USBH1_FS__UART4_RTS 0x3a 0x001
+#define MX27_PAD_USBH1_FS__GPIO2_26 0x3a 0x032
+#define MX27_PAD_USBH1_OE_B__USBH1_OE_B 0x3b 0x004
+#define MX27_PAD_USBH1_OE_B__GPIO2_27 0x3b 0x032
+#define MX27_PAD_USBH1_TXDM__USBH1_TXDM 0x3c 0x004
+#define MX27_PAD_USBH1_TXDM__UART4_TXD 0x3c 0x005
+#define MX27_PAD_USBH1_TXDM__GPIO2_28 0x3c 0x032
+#define MX27_PAD_USBH1_TXDP__USBH1_TXDP 0x3d 0x004
+#define MX27_PAD_USBH1_TXDP__UART4_CTS 0x3d 0x005
+#define MX27_PAD_USBH1_TXDP__GPIO2_29 0x3d 0x032
+#define MX27_PAD_USBH1_RXDM__USBH1_RXDM 0x3e 0x004
+#define MX27_PAD_USBH1_RXDM__GPIO2_30 0x3e 0x032
+#define MX27_PAD_USBH1_RXDP__USBH1_RXDP 0x3f 0x004
+#define MX27_PAD_USBH1_RXDP__UART4_RXD 0x3f 0x001
+#define MX27_PAD_USBH1_RXDP__GPIO2_31 0x3f 0x032
+#define MX27_PAD_UNUSED4__UNUSED4 0x40 0x004
+#define MX27_PAD_UNUSED4__GPIO3_0 0x40 0x032
+#define MX27_PAD_UNUSED5__UNUSED5 0x41 0x004
+#define MX27_PAD_UNUSED5__GPIO3_1 0x41 0x032
+#define MX27_PAD_UNUSED6__UNUSED6 0x42 0x004
+#define MX27_PAD_UNUSED6__GPIO3_2 0x42 0x032
+#define MX27_PAD_UNUSED7__UNUSED7 0x43 0x004
+#define MX27_PAD_UNUSED7__GPIO3_3 0x43 0x032
+#define MX27_PAD_UNUSED8__UNUSED8 0x44 0x004
+#define MX27_PAD_UNUSED8__GPIO3_4 0x44 0x032
+#define MX27_PAD_I2C2_SDA__I2C2_SDA 0x45 0x004
+#define MX27_PAD_I2C2_SDA__GPIO3_5 0x45 0x032
+#define MX27_PAD_I2C2_SCL__I2C2_SCL 0x46 0x004
+#define MX27_PAD_I2C2_SCL__GPIO3_6 0x46 0x032
+#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x47 0x004
+#define MX27_PAD_USBOTG_DATA5__GPIO3_7 0x47 0x032
+#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x48 0x004
+#define MX27_PAD_USBOTG_DATA6__GPIO3_8 0x48 0x032
+#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x49 0x004
+#define MX27_PAD_USBOTG_DATA0__GPIO3_9 0x49 0x032
+#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x4a 0x004
+#define MX27_PAD_USBOTG_DATA2__GPIO3_10 0x4a 0x032
+#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x4b 0x004
+#define MX27_PAD_USBOTG_DATA1__GPIO3_11 0x4b 0x032
+#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x4c 0x004
+#define MX27_PAD_USBOTG_DATA4__GPIO3_12 0x4c 0x032
+#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x4d 0x004
+#define MX27_PAD_USBOTG_DATA3__GPIO3_13 0x4d 0x032
+#define MX27_PAD_TOUT__TOUT 0x4e 0x004
+#define MX27_PAD_TOUT__GPIO3_14 0x4e 0x032
+#define MX27_PAD_TIN__TIN 0x4f 0x000
+#define MX27_PAD_TIN__GPIO3_15 0x4f 0x032
+#define MX27_PAD_SSI4_FS__SSI4_FS 0x50 0x004
+#define MX27_PAD_SSI4_FS__GPIO3_16 0x50 0x032
+#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x51 0x004
+#define MX27_PAD_SSI4_RXDAT__GPIO3_17 0x51 0x032
+#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x52 0x004
+#define MX27_PAD_SSI4_TXDAT__GPIO3_18 0x52 0x032
+#define MX27_PAD_SSI4_CLK__SSI4_CLK 0x53 0x004
+#define MX27_PAD_SSI4_CLK__GPIO3_19 0x53 0x032
+#define MX27_PAD_SSI1_FS__SSI1_FS 0x54 0x004
+#define MX27_PAD_SSI1_FS__GPIO3_20 0x54 0x032
+#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x55 0x004
+#define MX27_PAD_SSI1_RXDAT__GPIO3_21 0x55 0x032
+#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x56 0x004
+#define MX27_PAD_SSI1_TXDAT__GPIO3_22 0x56 0x032
+#define MX27_PAD_SSI1_CLK__SSI1_CLK 0x57 0x004
+#define MX27_PAD_SSI1_CLK__GPIO3_23 0x57 0x032
+#define MX27_PAD_SSI2_FS__SSI2_FS 0x58 0x004
+#define MX27_PAD_SSI2_FS__GPT5_TOUT 0x58 0x005
+#define MX27_PAD_SSI2_FS__GPIO3_24 0x58 0x032
+#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT 0x59 0x004
+#define MX27_PAD_SSI2_RXDAT__GPTS_TIN 0x59 0x001
+#define MX27_PAD_SSI2_RXDAT__GPIO3_25 0x59 0x032
+#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT 0x5a 0x004
+#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT 0x5a 0x005
+#define MX27_PAD_SSI2_TXDAT__GPIO3_26 0x5a 0x032
+#define MX27_PAD_SSI2_CLK__SSI2_CLK 0x5b 0x004
+#define MX27_PAD_SSI2_CLK__GPT4_TIN 0x5b 0x001
+#define MX27_PAD_SSI2_CLK__GPIO3_27 0x5b 0x032
+#define MX27_PAD_SSI3_FS__SSI3_FS 0x5c 0x004
+#define MX27_PAD_SSI3_FS__SLCDC2_D0 0x5c 0x001
+#define MX27_PAD_SSI3_FS__GPIO3_28 0x5c 0x032
+#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT 0x5d 0x004
+#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS 0x5d 0x001
+#define MX27_PAD_SSI3_RXDAT__GPIO3_29 0x5d 0x032
+#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT 0x5e 0x004
+#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS 0x5e 0x001
+#define MX27_PAD_SSI3_TXDAT__GPIO3_30 0x5e 0x032
+#define MX27_PAD_SSI3_CLK__SSI3_CLK 0x5f 0x004
+#define MX27_PAD_SSI3_CLK__SLCDC2_CLK 0x5f 0x001
+#define MX27_PAD_SSI3_CLK__GPIO3_31 0x5f 0x032
+#define MX27_PAD_SD3_CMD__SD3_CMD 0x60 0x004
+#define MX27_PAD_SD3_CMD__FEC_TXD0 0x60 0x006
+#define MX27_PAD_SD3_CMD__GPIO4_0 0x60 0x032
+#define MX27_PAD_SD3_CLK__SD3_CLK 0x61 0x004
+#define MX27_PAD_SD3_CLK__ETMTRACEPKT15 0x61 0x005
+#define MX27_PAD_SD3_CLK__FEC_TXD1 0x61 0x006
+#define MX27_PAD_SD3_CLK__GPIO4_1 0x61 0x032
+#define MX27_PAD_ATA_DATA0__ATA_DATA0 0x62 0x004
+#define MX27_PAD_ATA_DATA0__SD3_D0 0x62 0x005
+#define MX27_PAD_ATA_DATA0__FEC_TXD2 0x62 0x006
+#define MX27_PAD_ATA_DATA0__GPIO4_2 0x62 0x032
+#define MX27_PAD_ATA_DATA1__ATA_DATA1 0x63 0x004
+#define MX27_PAD_ATA_DATA1__SD3_D1 0x63 0x005
+#define MX27_PAD_ATA_DATA1__FEC_TXD3 0x63 0x006
+#define MX27_PAD_ATA_DATA1__GPIO4_3 0x63 0x032
+#define MX27_PAD_ATA_DATA2__ATA_DATA2 0x64 0x004
+#define MX27_PAD_ATA_DATA2__SD3_D2 0x64 0x005
+#define MX27_PAD_ATA_DATA2__FEC_RX_ER 0x64 0x002
+#define MX27_PAD_ATA_DATA2__GPIO4_4 0x64 0x032
+#define MX27_PAD_ATA_DATA3__ATA_DATA3 0x65 0x004
+#define MX27_PAD_ATA_DATA3__SD3_D3 0x65 0x005
+#define MX27_PAD_ATA_DATA3__FEC_RXD1 0x65 0x002
+#define MX27_PAD_ATA_DATA3__GPIO4_5 0x65 0x032
+#define MX27_PAD_ATA_DATA4__ATA_DATA4 0x66 0x004
+#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14 0x66 0x005
+#define MX27_PAD_ATA_DATA4__FEC_RXD2 0x66 0x002
+#define MX27_PAD_ATA_DATA4__GPIO4_6 0x66 0x032
+#define MX27_PAD_ATA_DATA5__ATA_DATA5 0x67 0x004
+#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13 0x67 0x005
+#define MX27_PAD_ATA_DATA5__FEC_RXD3 0x67 0x002
+#define MX27_PAD_ATA_DATA5__GPIO4_7 0x67 0x032
+#define MX27_PAD_ATA_DATA6__ATA_DATA6 0x68 0x004
+#define MX27_PAD_ATA_DATA6__FEC_MDIO 0x68 0x005
+#define MX27_PAD_ATA_DATA6__GPIO4_8 0x68 0x032
+#define MX27_PAD_ATA_DATA7__ATA_DATA7 0x69 0x004
+#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12 0x69 0x005
+#define MX27_PAD_ATA_DATA7__FEC_MDC 0x69 0x006
+#define MX27_PAD_ATA_DATA7__GPIO4_9 0x69 0x032
+#define MX27_PAD_ATA_DATA8__ATA_DATA8 0x6a 0x004
+#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11 0x6a 0x005
+#define MX27_PAD_ATA_DATA8__FEC_CRS 0x6a 0x002
+#define MX27_PAD_ATA_DATA8__GPIO4_10 0x6a 0x032
+#define MX27_PAD_ATA_DATA9__ATA_DATA9 0x6b 0x004
+#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10 0x6b 0x005
+#define MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x6b 0x002
+#define MX27_PAD_ATA_DATA9__GPIO4_11 0x6b 0x032
+#define MX27_PAD_ATA_DATA10__ATA_DATA10 0x6c 0x004
+#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9 0x6c 0x005
+#define MX27_PAD_ATA_DATA10__FEC_RXD0 0x6c 0x002
+#define MX27_PAD_ATA_DATA10__GPIO4_12 0x6c 0x032
+#define MX27_PAD_ATA_DATA11__ATA_DATA11 0x6d 0x004
+#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8 0x6d 0x005
+#define MX27_PAD_ATA_DATA11__FEC_RX_DV 0x6d 0x002
+#define MX27_PAD_ATA_DATA11__GPIO4_13 0x6d 0x032
+#define MX27_PAD_ATA_DATA12__ATA_DATA12 0x6e 0x004
+#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7 0x6e 0x005
+#define MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x6e 0x002
+#define MX27_PAD_ATA_DATA12__GPIO4_14 0x6e 0x032
+#define MX27_PAD_ATA_DATA13__ATA_DATA13 0x6f 0x004
+#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6 0x6f 0x005
+#define MX27_PAD_ATA_DATA13__FEC_COL 0x6f 0x002
+#define MX27_PAD_ATA_DATA13__GPIO4_15 0x6f 0x032
+#define MX27_PAD_ATA_DATA14__ATA_DATA14 0x70 0x004
+#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5 0x70 0x005
+#define MX27_PAD_ATA_DATA14__FEC_TX_ER 0x70 0x006
+#define MX27_PAD_ATA_DATA14__GPIO4_16 0x70 0x032
+#define MX27_PAD_I2C_DATA__I2C_DATA 0x71 0x004
+#define MX27_PAD_I2C_DATA__GPIO4_17 0x71 0x032
+#define MX27_PAD_I2C_CLK__I2C_CLK 0x72 0x004
+#define MX27_PAD_I2C_CLK__GPIO4_18 0x72 0x032
+#define MX27_PAD_CSPI2_SS2__CSPI2_SS2 0x73 0x004
+#define MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x73 0x005
+#define MX27_PAD_CSPI2_SS2__GPIO4_19 0x73 0x032
+#define MX27_PAD_CSPI2_SS1__CSPI2_SS1 0x74 0x004
+#define MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x74 0x005
+#define MX27_PAD_CSPI2_SS1__GPIO4_20 0x74 0x032
+#define MX27_PAD_CSPI2_SS0__CSPI2_SS0 0x75 0x004
+#define MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x75 0x005
+#define MX27_PAD_CSPI2_SS0__GPIO4_21 0x75 0x032
+#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x76 0x004
+#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x76 0x005
+#define MX27_PAD_CSPI2_SCLK__GPIO4_22 0x76 0x032
+#define MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x77 0x004
+#define MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x77 0x005
+#define MX27_PAD_CSPI2_MISO__GPIO4_23 0x77 0x032
+#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x78 0x004
+#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x78 0x005
+#define MX27_PAD_CSPI2_MOSI__GPIO4_24 0x78 0x032
+#define MX27_PAD_CSPI1_RDY__CSPI1_RDY 0x79 0x000
+#define MX27_PAD_CSPI1_RDY__GPIO4_25 0x79 0x032
+#define MX27_PAD_CSPI1_SS2__CSPI1_SS2 0x7a 0x004
+#define MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x7a 0x005
+#define MX27_PAD_CSPI1_SS2__GPIO4_26 0x7a 0x032
+#define MX27_PAD_CSPI1_SS1__CSPI1_SS1 0x7b 0x004
+#define MX27_PAD_CSPI1_SS1__GPIO4_27 0x7b 0x032
+#define MX27_PAD_CSPI1_SS0__CSPI1_SS0 0x7c 0x004
+#define MX27_PAD_CSPI1_SS0__GPIO4_28 0x7c 0x032
+#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x7d 0x004
+#define MX27_PAD_CSPI1_SCLK__GPIO4_29 0x7d 0x032
+#define MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x7e 0x004
+#define MX27_PAD_CSPI1_MISO__GPIO4_30 0x7e 0x032
+#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x7f 0x004
+#define MX27_PAD_CSPI1_MOSI__GPIO4_31 0x7f 0x032
+#define MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x80 0x000
+#define MX27_PAD_USBOTG_NXT__KP_COL6A 0x80 0x005
+#define MX27_PAD_USBOTG_NXT__GPIO5_0 0x80 0x032
+#define MX27_PAD_USBOTG_STP__USBOTG_STP 0x81 0x004
+#define MX27_PAD_USBOTG_STP__KP_ROW6A 0x81 0x005
+#define MX27_PAD_USBOTG_STP__GPIO5_1 0x81 0x032
+#define MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x82 0x000
+#define MX27_PAD_USBOTG_DIR__KP_ROW7A 0x82 0x005
+#define MX27_PAD_USBOTG_DIR__GPIO5_2 0x82 0x032
+#define MX27_PAD_UART2_CTS__UART2_CTS 0x83 0x004
+#define MX27_PAD_UART2_CTS__KP_COL7 0x83 0x005
+#define MX27_PAD_UART2_CTS__GPIO5_3 0x83 0x032
+#define MX27_PAD_UART2_RTS__UART2_RTS 0x84 0x000
+#define MX27_PAD_UART2_RTS__KP_ROW7 0x84 0x005
+#define MX27_PAD_UART2_RTS__GPIO5_4 0x84 0x032
+#define MX27_PAD_PWMO__PWMO 0x85 0x004
+#define MX27_PAD_PWMO__GPIO5_5 0x85 0x032
+#define MX27_PAD_UART2_TXD__UART2_TXD 0x86 0x004
+#define MX27_PAD_UART2_TXD__KP_COL6 0x86 0x005
+#define MX27_PAD_UART2_TXD__GPIO5_6 0x86 0x032
+#define MX27_PAD_UART2_RXD__UART2_RXD 0x87 0x000
+#define MX27_PAD_UART2_RXD__KP_ROW6 0x87 0x005
+#define MX27_PAD_UART2_RXD__GPIO5_7 0x87 0x032
+#define MX27_PAD_UART3_TXD__UART3_TXD 0x88 0x004
+#define MX27_PAD_UART3_TXD__GPIO5_8 0x88 0x032
+#define MX27_PAD_UART3_RXD__UART3_RXD 0x89 0x000
+#define MX27_PAD_UART3_RXD__GPIO5_9 0x89 0x032
+#define MX27_PAD_UART3_CTS__UART3_CTS 0x8a 0x004
+#define MX27_PAD_UART3_CTS__GPIO5_10 0x8a 0x032
+#define MX27_PAD_UART3_RTS__UART3_RTS 0x8b 0x000
+#define MX27_PAD_UART3_RTS__GPIO5_11 0x8b 0x032
+#define MX27_PAD_UART1_TXD__UART1_TXD 0x8c 0x004
+#define MX27_PAD_UART1_TXD__GPIO5_12 0x8c 0x032
+#define MX27_PAD_UART1_RXD__UART1_RXD 0x8d 0x000
+#define MX27_PAD_UART1_RXD__GPIO5_13 0x8d 0x032
+#define MX27_PAD_UART1_CTS__UART1_CTS 0x8e 0x004
+#define MX27_PAD_UART1_CTS__GPIO5_14 0x8e 0x032
+#define MX27_PAD_UART1_RTS__UART1_RTS 0x8f 0x000
+#define MX27_PAD_UART1_RTS__GPIO5_15 0x8f 0x032
+#define MX27_PAD_RTCK__RTCK 0x90 0x004
+#define MX27_PAD_RTCK__OWIRE 0x90 0x005
+#define MX27_PAD_RTCK__GPIO5_16 0x90 0x032
+#define MX27_PAD_RESET_OUT_B__RESET_OUT_B 0x91 0x004
+#define MX27_PAD_RESET_OUT_B__GPIO5_17 0x91 0x032
+#define MX27_PAD_SD1_D0__SD1_D0 0x92 0x004
+#define MX27_PAD_SD1_D0__CSPI3_MISO 0x92 0x001
+#define MX27_PAD_SD1_D0__GPIO5_18 0x92 0x032
+#define MX27_PAD_SD1_D1__SD1_D1 0x93 0x004
+#define MX27_PAD_SD1_D1__GPIO5_19 0x93 0x032
+#define MX27_PAD_SD1_D2__SD1_D2 0x94 0x004
+#define MX27_PAD_SD1_D2__GPIO5_20 0x94 0x032
+#define MX27_PAD_SD1_D3__SD1_D3 0x95 0x004
+#define MX27_PAD_SD1_D3__CSPI3_SS 0x95 0x005
+#define MX27_PAD_SD1_D3__GPIO5_21 0x95 0x032
+#define MX27_PAD_SD1_CMD__SD1_CMD 0x96 0x004
+#define MX27_PAD_SD1_CMD__CSPI3_MOSI 0x96 0x005
+#define MX27_PAD_SD1_CMD__GPIO5_22 0x96 0x032
+#define MX27_PAD_SD1_CLK__SD1_CLK 0x97 0x004
+#define MX27_PAD_SD1_CLK__CSPI3_SCLK 0x97 0x005
+#define MX27_PAD_SD1_CLK__GPIO5_23 0x97 0x032
+#define MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x98 0x000
+#define MX27_PAD_USBOTG_CLK__GPIO5_24 0x98 0x032
+#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x99 0x004
+#define MX27_PAD_USBOTG_DATA7__GPIO5_25 0x99 0x032
+#define MX27_PAD_UNUSED9__UNUSED9 0x9a 0x004
+#define MX27_PAD_UNUSED9__GPIO5_26 0x9a 0x032
+#define MX27_PAD_UNUSED10__UNUSED10 0x9b 0x004
+#define MX27_PAD_UNUSED10__GPIO5_27 0x9b 0x032
+#define MX27_PAD_UNUSED11__UNUSED11 0x9c 0x004
+#define MX27_PAD_UNUSED11__GPIO5_28 0x9c 0x032
+#define MX27_PAD_UNUSED12__UNUSED12 0x9d 0x004
+#define MX27_PAD_UNUSED12__GPIO5_29 0x9d 0x032
+#define MX27_PAD_UNUSED13__UNUSED13 0x9e 0x004
+#define MX27_PAD_UNUSED13__GPIO5_30 0x9e 0x032
+#define MX27_PAD_UNUSED14__UNUSED14 0x9f 0x004
+#define MX27_PAD_UNUSED14__GPIO5_31 0x9f 0x032
+#define MX27_PAD_NFRB__NFRB 0xa0 0x000
+#define MX27_PAD_NFRB__ETMTRACEPKT3 0xa0 0x005
+#define MX27_PAD_NFRB__GPIO6_0 0xa0 0x032
+#define MX27_PAD_NFCLE__NFCLE 0xa1 0x004
+#define MX27_PAD_NFCLE__ETMTRACEPKT0 0xa1 0x005
+#define MX27_PAD_NFCLE__GPIO6_1 0xa1 0x032
+#define MX27_PAD_NFWP_B__NFWP_B 0xa2 0x004
+#define MX27_PAD_NFWP_B__ETMTRACEPKT1 0xa2 0x005
+#define MX27_PAD_NFWP_B__GPIO6_2 0xa2 0x032
+#define MX27_PAD_NFCE_B__NFCE_B 0xa3 0x004
+#define MX27_PAD_NFCE_B__ETMTRACEPKT2 0xa3 0x005
+#define MX27_PAD_NFCE_B__GPIO6_3 0xa3 0x032
+#define MX27_PAD_NFALE__NFALE 0xa4 0x004
+#define MX27_PAD_NFALE__ETMPIPESTAT0 0xa4 0x005
+#define MX27_PAD_NFALE__GPIO6_4 0xa4 0x032
+#define MX27_PAD_NFRE_B__NFRE_B 0xa5 0x004
+#define MX27_PAD_NFRE_B__ETMPIPESTAT1 0xa5 0x005
+#define MX27_PAD_NFRE_B__GPIO6_5 0xa5 0x032
+#define MX27_PAD_NFWE_B__NFWE_B 0xa6 0x004
+#define MX27_PAD_NFWE_B__ETMPIPESTAT2 0xa6 0x005
+#define MX27_PAD_NFWE_B__GPIO6_6 0xa6 0x032
+#define MX27_PAD_PC_POE__PC_POE 0xa7 0x004
+#define MX27_PAD_PC_POE__ATA_BUFFER_EN 0xa7 0x005
+#define MX27_PAD_PC_POE__GPIO6_7 0xa7 0x032
+#define MX27_PAD_PC_RW_B__PC_RW_B 0xa8 0x004
+#define MX27_PAD_PC_RW_B__ATA_IORDY 0xa8 0x001
+#define MX27_PAD_PC_RW_B__GPIO6_8 0xa8 0x032
+#define MX27_PAD_IOIS16__IOIS16 0xa9 0x000
+#define MX27_PAD_IOIS16__ATA_INTRQ 0xa9 0x001
+#define MX27_PAD_IOIS16__GPIO6_9 0xa9 0x032
+#define MX27_PAD_PC_RST__PC_RST 0xaa 0x004
+#define MX27_PAD_PC_RST__ATA_RESET_B 0xaa 0x005
+#define MX27_PAD_PC_RST__GPIO6_10 0xaa 0x032
+#define MX27_PAD_PC_BVD2__PC_BVD2 0xab 0x000
+#define MX27_PAD_PC_BVD2__ATA_DMACK 0xab 0x005
+#define MX27_PAD_PC_BVD2__GPIO6_11 0xab 0x032
+#define MX27_PAD_PC_BVD1__PC_BVD1 0xac 0x000
+#define MX27_PAD_PC_BVD1__ATA_DMARQ 0xac 0x001
+#define MX27_PAD_PC_BVD1__GPIO6_12 0xac 0x032
+#define MX27_PAD_PC_VS2__PC_VS2 0xad 0x000
+#define MX27_PAD_PC_VS2__ATA_DA0 0xad 0x005
+#define MX27_PAD_PC_VS2__GPIO6_13 0xad 0x032
+#define MX27_PAD_PC_VS1__PC_VS1 0xae 0x000
+#define MX27_PAD_PC_VS1__ATA_DA1 0xae 0x005
+#define MX27_PAD_PC_VS1__GPIO6_14 0xae 0x032
+#define MX27_PAD_CLKO__CLKO 0xaf 0x004
+#define MX27_PAD_CLKO__GPIO6_15 0xaf 0x032
+#define MX27_PAD_PC_PWRON__PC_PWRON 0xb0 0x000
+#define MX27_PAD_PC_PWRON__ATA_DA2 0xb0 0x005
+#define MX27_PAD_PC_PWRON__GPIO6_16 0xb0 0x032
+#define MX27_PAD_PC_READY__PC_READY 0xb1 0x000
+#define MX27_PAD_PC_READY__ATA_CS0 0xb1 0x005
+#define MX27_PAD_PC_READY__GPIO6_17 0xb1 0x032
+#define MX27_PAD_PC_WAIT_B__PC_WAIT_B 0xb2 0x000
+#define MX27_PAD_PC_WAIT_B__ATA_CS1 0xb2 0x005
+#define MX27_PAD_PC_WAIT_B__GPIO6_18 0xb2 0x032
+#define MX27_PAD_PC_CD2_B__PC_CD2_B 0xb3 0x000
+#define MX27_PAD_PC_CD2_B__ATA_DIOW 0xb3 0x005
+#define MX27_PAD_PC_CD2_B__GPIO6_19 0xb3 0x032
+#define MX27_PAD_PC_CD1_B__PC_CD1_B 0xb4 0x000
+#define MX27_PAD_PC_CD1_B__ATA_DIOR 0xb4 0x005
+#define MX27_PAD_PC_CD1_B__GPIO6_20 0xb4 0x032
+#define MX27_PAD_CS4_B__CS4_B 0xb5 0x004
+#define MX27_PAD_CS4_B__ETMTRACESYNC 0xb5 0x005
+#define MX27_PAD_CS4_B__GPIO6_21 0xb5 0x032
+#define MX27_PAD_CS5_B__CS5_B 0xb6 0x004
+#define MX27_PAD_CS5_B__ETMTRACECLK 0xb6 0x005
+#define MX27_PAD_CS5_B__GPIO6_22 0xb6 0x032
+#define MX27_PAD_ATA_DATA15__ATA_DATA15 0xb7 0x004
+#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4 0xb7 0x005
+#define MX27_PAD_ATA_DATA15__FEC_TX_EN 0xb7 0x006
+#define MX27_PAD_ATA_DATA15__GPIO6_23 0xb7 0x032
+#define MX27_PAD_UNUSED15__UNUSED15 0xb8 0x004
+#define MX27_PAD_UNUSED15__GPIO6_24 0xb8 0x032
+#define MX27_PAD_UNUSED16__UNUSED16 0xb9 0x004
+#define MX27_PAD_UNUSED16__GPIO6_25 0xb9 0x032
+#define MX27_PAD_UNUSED17__UNUSED17 0xba 0x004
+#define MX27_PAD_UNUSED17__GPIO6_26 0xba 0x032
+#define MX27_PAD_UNUSED18__UNUSED18 0xbb 0x004
+#define MX27_PAD_UNUSED18__GPIO6_27 0xbb 0x032
+#define MX27_PAD_UNUSED19__UNUSED19 0xbc 0x004
+#define MX27_PAD_UNUSED19__GPIO6_28 0xbc 0x032
+#define MX27_PAD_UNUSED20__UNUSED20 0xbd 0x004
+#define MX27_PAD_UNUSED20__GPIO6_29 0xbd 0x032
+#define MX27_PAD_UNUSED21__UNUSED21 0xbe 0x004
+#define MX27_PAD_UNUSED21__GPIO6_30 0xbe 0x032
+#define MX27_PAD_UNUSED22__UNUSED22 0xbf 0x004
+#define MX27_PAD_UNUSED22__GPIO6_31 0xbf 0x032
+
+#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 826231e..6279e0b 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -10,6 +10,9 @@
*/
#include "skeleton.dtsi"
+#include "imx27-pinfunc.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
@@ -67,6 +70,26 @@
};
};
+ usbphy {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usbphy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ clocks = <&clks 75>;
+ clock-names = "main_clk";
+ };
+
+ usbphy2: usbphy@2 {
+ compatible = "usb-nop-xceiv";
+ reg = <2>;
+ clocks = <&clks 75>;
+ clock-names = "main_clk";
+ };
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -204,6 +227,30 @@
status = "disabled";
};
+ ssi1: ssi@10010000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+ reg = <0x10010000 0x1000>;
+ interrupts = <14>;
+ clocks = <&clks 26>;
+ dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
+ dma-names = "rx0", "tx0", "rx1", "tx1";
+ fsl,fifo-depth = <8>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@10011000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+ reg = <0x10011000 0x1000>;
+ interrupts = <13>;
+ clocks = <&clks 25>;
+ dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
+ dma-names = "rx0", "tx0", "rx1", "tx1";
+ fsl,fifo-depth = <8>;
+ status = "disabled";
+ };
+
i2c1: i2c@10012000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -236,64 +283,72 @@
status = "disabled";
};
- gpio1: gpio@10015000 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015000 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ iomuxc: iomuxc@10015000 {
+ compatible = "fsl,imx27-iomuxc";
+ reg = <0x10015000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- gpio2: gpio@10015100 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015100 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio1: gpio@10015000 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015000 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- gpio3: gpio@10015200 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015200 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio2: gpio@10015100 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015100 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- gpio4: gpio@10015300 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015300 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio3: gpio@10015200 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015200 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- gpio5: gpio@10015400 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015400 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio4: gpio@10015300 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015300 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- gpio6: gpio@10015500 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015500 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ gpio5: gpio@10015400 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015400 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@10015500 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015500 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
audmux: audmux@10016000 {
@@ -404,6 +459,42 @@
iram = <&iram>;
};
+ usbotg: usb@10024000 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024000 0x200>;
+ interrupts = <56>;
+ clocks = <&clks 15>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,usbphy = <&usbphy0>;
+ status = "disabled";
+ };
+
+ usbh1: usb@10024200 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024200 0x200>;
+ interrupts = <54>;
+ clocks = <&clks 15>;
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbh2: usb@10024400 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024400 0x200>;
+ interrupts = <55>;
+ clocks = <&clks 15>;
+ fsl,usbmisc = <&usbmisc 2>;
+ fsl,usbphy = <&usbphy2>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@10024600 {
+ #index-cells = <1>;
+ compatible = "fsl,imx27-usbmisc";
+ reg = <0x10024600 0x200>;
+ clocks = <&clks 62>;
+ };
+
sahara2: sahara@10025000 {
compatible = "fsl,imx27-sahara";
reg = <0x10025000 0x1000>;
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index e2efd8d..221cac4 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -48,6 +48,7 @@
MX28_PAD_LCD_D20__GPIO_1_20
MX28_PAD_LCD_D21__GPIO_1_21
MX28_PAD_LCD_D22__GPIO_1_22
+ MX28_PAD_GPMI_CE1N__GPIO_0_17
>;
fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <MXS_VOLTAGE_HIGH>;
@@ -66,6 +67,16 @@
fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+
+ usb0_otg_apf28dev: otg-apf28dev@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D23__GPIO_1_23
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
};
lcdif@80030000 {
@@ -131,6 +142,8 @@
ahb@80080000 {
usb0: usb@80080000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_otg_apf28dev>;
vbus-supply = <®_usb0_vbus>;
status = "okay";
};
@@ -150,13 +163,17 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 23 1>;
+ enable-active-high;
};
};
@@ -177,4 +194,14 @@
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user-button {
+ label = "User button";
+ gpios = <&gpio0 17 0>;
+ linux,code = <0x100>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 6f254ca..e1ce917 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -193,9 +193,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index cabb617..ae7c339 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -100,6 +100,8 @@
usb0: usb@80080000 {
pinctrl-names = "default";
pinctrl-0 = <&usb0_otg_cfa10036>;
+ dr_mode = "peripheral";
+ phy_type = "utmi";
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index f93e9a7..e5beaa5 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -54,7 +54,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
@@ -72,9 +72,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10037>;
regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 7087b4b..7d51459 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -229,15 +229,39 @@
i2c-parent = <&i2c1>;
i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
+
+ adc0: nau7802@2a {
+ compatible = "nuvoton,nau7802";
+ reg = <0x2a>;
+ nuvoton,vldo = <3000>;
+ };
};
i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
+
+ adc1: nau7802@2a {
+ compatible = "nuvoton,nau7802";
+ reg = <0x2a>;
+ nuvoton,vldo = <3000>;
+ };
};
i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <2>;
+
+ adc2: nau7802@2a {
+ compatible = "nuvoton,nau7802";
+ reg = <0x2a>;
+ nuvoton,vldo = <3000>;
+ };
};
i2c@3 {
@@ -274,7 +298,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
@@ -282,9 +306,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10049>;
regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 3c13128..c4e00ce 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -134,7 +134,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
@@ -142,9 +142,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10057>;
regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index 2469d34..7c9cc78 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -101,7 +101,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
@@ -109,11 +109,14 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@0 {
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10058>;
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
new file mode 100644
index 0000000..5f326c1
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+ model = "I2SE Duckbill";
+ compatible = "i2se,duckbill", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <8>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_pins_a: led_gpio@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RX__GPIO_3_4
+ MX28_PAD_AUART1_TX__GPIO_3_5
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ status = "okay";
+ };
+
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-supply = <®_3p3v>;
+ phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a>;
+
+ status {
+ label = "duckbill:green:status";
+ gpios = <&gpio3 5 0>;
+ };
+
+ failure {
+ label = "duckbill:red:status";
+ gpios = <&gpio3 4 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
new file mode 100644
index 0000000..7c1572c
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
+ */
+
+/dts-v1/;
+#include "imx28-eukrea-mbmx28lc.dtsi"
+
+/ {
+ model = "Eukrea Electromatique MBMX283LC";
+ compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x04000000>;
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+
+&mac0 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pinctrl{
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_cpuimx283>;
+
+ hog_pins_cpuimx283: hog-cpuimx283@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+ MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
new file mode 100644
index 0000000..e773144
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
+ */
+
+#include "imx28-eukrea-mbmx283lc.dts"
+
+/ {
+ model = "Eukrea Electromatique MBMX287LC";
+ compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+};
+
+&mac1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac1_pins_a>;
+ phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
+ hog_pins_cpuimx287: hog-cpuimx287@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SPDIF__GPIO_3_27
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
new file mode 100644
index 0000000..927b391
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -0,0 +1,326 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+ model = "Eukrea Electromatique MBMX28LC";
+ compatible = "eukrea,mbmx28lc", "fsl,imx28";
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 4 1000000>;
+ brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
+ default-brightness-level = <10>;
+ };
+
+ button-sw3 {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
+
+ sw3 {
+ label = "SW3";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ };
+ };
+
+ button-sw4 {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
+
+ sw4 {
+ label = "SW4";
+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ };
+ };
+
+ led-d6 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_d6_pins_mbmx28lc>;
+
+ led1 {
+ label = "d6";
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ led-d7 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_d7_pins_mbmx28lc>;
+
+ led1 {
+ label = "d7";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_lcd_3v3: regulator@1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>;
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb0_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>;
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb1_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx28-mbmx28lc-sgtl5000",
+ "fsl,mxs-audio-sgtl5000";
+ model = "imx28-mbmx28lc-sgtl5000";
+ saif-controllers = <&saif0 &saif1>;
+ audio-codec = <&sgtl5000>;
+ };
+};
+
+&duart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_4pins_a>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ clocks = <&saif0>;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
+ lcd-supply = <®_lcd_3v3>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ model = "43WVF1G-0";
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9072000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <10>;
+ hfront-porch = <5>;
+ vback-porch = <8>;
+ vfront-porch = <8>;
+ hsync-len = <40>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&lradc {
+ fsl,lradc-touchscreen-wires = <4>;
+ status = "okay";
+};
+
+&pinctrl {
+ gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D21__GPIO_1_21
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D20__GPIO_1_20
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_VSYNC__LCD_VSYNC
+ MX28_PAD_LCD_HSYNC__LCD_HSYNC
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+ MX28_PAD_LCD_ENABLE__LCD_ENABLE
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D23__GPIO_1_23
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D22__GPIO_1_22
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_RESET__GPIO_3_30
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D18__GPIO_1_18
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D19__GPIO_1_19
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pins_a>;
+ status = "okay";
+};
+
+&saif0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif0_pins_a>;
+ status = "okay";
+};
+
+&saif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif1_pins_a>;
+ fsl,saif-master = <&saif0>;
+ status = "okay";
+};
+
+&ssp0 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <4>;
+ cd-inverted;
+ status = "okay";
+};
+
+&usb0 {
+ disable-over-current;
+ vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_pins_b>;
+};
+
+&usb1 {
+ vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 4267c2b..e4cc44c 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -193,6 +193,7 @@
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
+ clock-frequency = <400000>;
status = "okay";
sgtl5000: codec@0a {
@@ -278,33 +279,39 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
- reg_fec_3v3: fec-3v3 {
+ reg_fec_3v3: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -312,8 +319,9 @@
enable-active-high;
};
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@4 {
compatible = "regulator-fixed";
+ reg = <4>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -321,8 +329,9 @@
enable-active-high;
};
- reg_lcd_3v3: lcd-3v3 {
+ reg_lcd_3v3: regulator@5 {
compatible = "regulator-fixed";
+ reg = <5>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -330,8 +339,9 @@
enable-active-high;
};
- reg_can_3v3: can-3v3 {
+ reg_can_3v3: regulator@6 {
compatible = "regulator-fixed";
+ reg = <6>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index d3958da..9348ce5 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -116,7 +116,6 @@
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_m28>;
display = <&display>;
- reset-active-high;
status = "okay";
display: display0 {
@@ -180,7 +179,7 @@
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
disable-over-current;
status = "okay";
};
@@ -229,33 +228,39 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 29 0>;
};
- reg_vddio_sd1: vddio-sd1 {
+ reg_vddio_sd1: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "vddio-sd1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 0>;
};
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 8e2477f..f0ad7b9 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -194,7 +194,7 @@
};
rtc: rtc@68 {
- compatible = "stm,mt41t62";
+ compatible = "stm,m41t62";
reg = <0x68>;
};
};
@@ -248,14 +248,14 @@
usb0: usb@80080000 {
vbus-supply = <®_usb0_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy0_pins_a>;
+ pinctrl-0 = <&usb0_pins_a>;
status = "okay";
};
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
status = "okay";
};
@@ -285,33 +285,39 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 12 0>;
};
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 4870f07..0ce3cb8 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -106,7 +106,7 @@
usb0: usb@80080000 {
vbus-supply = <®_usb0_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy0_pins_b>;
+ pinctrl-0 = <&usb0_pins_b>;
status = "okay";
};
@@ -127,9 +127,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index be5a055..e14bd86 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -43,9 +43,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -53,8 +56,9 @@
enable-active-high;
};
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -62,35 +66,38 @@
enable-active-high;
};
- reg_2p5v: 2p5v {
+ reg_2p5v: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_can_xcvr: can-xcvr {
+ reg_can_xcvr: regulator@4 {
compatible = "regulator-fixed";
+ reg = <4>;
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 0 0>;
- enable-active-low;
pinctrl-names = "default";
pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
};
- reg_lcd: lcd-power {
+ reg_lcd: regulator@5 {
compatible = "regulator-fixed";
+ reg = <5>;
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -98,8 +105,9 @@
enable-active-high;
};
- reg_lcd_reset: lcd-reset {
+ reg_lcd_reset: regulator@6 {
compatible = "regulator-fixed";
+ reg = <6>;
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index f8e9b20..90a5795 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -32,6 +32,8 @@
serial4 = &auart4;
spi0 = &ssp1;
spi1 = &ssp2;
+ usbphy0 = &usbphy0;
+ usbphy1 = &usbphy1;
};
cpus {
@@ -343,6 +345,19 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ auart2_pins_a: auart2-pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__AUART2_RX
+ MX28_PAD_AUART2_TX__AUART2_TX
+ MX28_PAD_AUART2_CTS__AUART2_CTS
+ MX28_PAD_AUART2_RTS__AUART2_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
auart3_pins_a: auart3@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -655,6 +670,33 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ lcdif_18bit_pins_a: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D00__LCD_D0
+ MX28_PAD_LCD_D01__LCD_D1
+ MX28_PAD_LCD_D02__LCD_D2
+ MX28_PAD_LCD_D03__LCD_D3
+ MX28_PAD_LCD_D04__LCD_D4
+ MX28_PAD_LCD_D05__LCD_D5
+ MX28_PAD_LCD_D06__LCD_D6
+ MX28_PAD_LCD_D07__LCD_D7
+ MX28_PAD_LCD_D08__LCD_D8
+ MX28_PAD_LCD_D09__LCD_D9
+ MX28_PAD_LCD_D10__LCD_D10
+ MX28_PAD_LCD_D11__LCD_D11
+ MX28_PAD_LCD_D12__LCD_D12
+ MX28_PAD_LCD_D13__LCD_D13
+ MX28_PAD_LCD_D14__LCD_D14
+ MX28_PAD_LCD_D15__LCD_D15
+ MX28_PAD_LCD_D16__LCD_D16
+ MX28_PAD_LCD_D17__LCD_D17
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
lcdif_16bit_pins_a: lcdif-16bit@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -743,7 +785,7 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- usbphy0_pins_a: usbphy0@0 {
+ usb0_pins_a: usb0@0 {
reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
@@ -753,7 +795,7 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- usbphy0_pins_b: usbphy0@1 {
+ usb0_pins_b: usb0@1 {
reg = <1>;
fsl,pinmux-ids = <
MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
@@ -763,7 +805,7 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- usbphy1_pins_a: usbphy1@0 {
+ usb1_pins_a: usb1@0 {
reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
@@ -782,6 +824,17 @@
fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <MXS_PULL_ENABLE>;
};
+
+ usb0_id_pins_b: usb0id1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__USB0_ID
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
};
digctl: digctl@8001c000 {
@@ -946,6 +999,7 @@
20 21 22 23 24 25>;
status = "disabled";
clocks = <&clks 41>;
+ #io-channel-cells = <1>;
};
spdif: spdif@80054000 {
@@ -1130,4 +1184,9 @@
status = "disabled";
};
};
+
+ iio_hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&lradc 8>;
+ };
};
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 0000000..906ae93
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+ memory {
+ reg = <0x80000000 0x8000000>; /* 128M */
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ imx35-eukrea {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX35_PAD_FEC_COL__FEC_COL 0x80000000
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX35_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000
+ MX35_PAD_FEC_CRS__FEC_CRS 0x80000000
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000
+ MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000
+ >;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 0000000..1bdec21
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bp1>;
+
+ bp1 {
+ label = "BP1";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ linux,input-type = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led1>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio3 24>;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ imx35-eukrea {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x80000000
+ MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x80000000
+ MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x80000000
+ MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x80000000
+ >;
+ };
+
+ pinctrl_bp1: bp1grp {
+ fsl,pins = <MX35_PAD_LD19__GPIO3_25 0x80000000>;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000
+ MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
+ MX35_PAD_LD18__GPIO3_24 0x80000000 /* CD */
+ >;
+ };
+
+ pinctrl_led1: led1grp {
+ fsl,pins = <MX35_PAD_LD23__GPIO3_29 0x80000000>;
+ };
+
+ pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
+ fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5
+ MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5
+ MX35_PAD_CTS1__UART1_CTS 0x1c5
+ MX35_PAD_RTS1__UART1_RTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX35_PAD_RXD2__UART2_RXD_MUX 0x1c5
+ MX35_PAD_TXD2__UART2_TXD_MUX 0x1c5
+ MX35_PAD_RTS2__UART2_RTS 0x1c5
+ MX35_PAD_CTS2__UART2_CTS 0x1c5
+ >;
+ };
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
new file mode 100644
index 0000000..88b218f
--- /dev/null
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -0,0 +1,359 @@
+/*
+ * Copyright 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on imx27.dtsi
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "imx35-pinfunc.h"
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ spi0 = &spi1;
+ spi1 = &spi2;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm1136";
+ device_type = "cpu";
+ };
+ };
+
+ avic: avic-interrupt-controller@68000000 {
+ compatible = "fsl,imx35-avic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x68000000 0x10000000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&avic>;
+ ranges;
+
+ L2: l2-cache@30000000 {
+ compatible = "arm,l210-cache";
+ reg = <0x30000000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips1: aips@43f00000 {
+ compatible = "fsl,aips", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ i2c1: i2c@43f80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f80000 0x4000>;
+ clocks = <&clks 51>;
+ clock-names = "ipg_per";
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@43f84000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f84000 0x4000>;
+ clocks = <&clks 53>;
+ clock-names = "ipg_per";
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ uart1: serial@43f90000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ clocks = <&clks 9>, <&clks 70>;
+ clock-names = "ipg", "per";
+ interrupts = <45>;
+ status = "disabled";
+ };
+
+ uart2: serial@43f94000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ clocks = <&clks 9>, <&clks 71>;
+ clock-names = "ipg", "per";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@43f98000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f98000 0x4000>;
+ clocks = <&clks 52>;
+ clock-names = "ipg_per";
+ interrupts = <4>;
+ status = "disabled";
+ };
+
+ ssi1: ssi@43fa0000 {
+ compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
+ reg = <0x43fa0000 0x4000>;
+ interrupts = <11>;
+ clocks = <&clks 68>;
+ dmas = <&sdma 28 0 0>,
+ <&sdma 29 0 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ spi1: cspi@43fa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-cspi";
+ reg = <0x43fa4000 0x4000>;
+ clocks = <&clks 35 &clks 35>;
+ clock-names = "ipg", "per";
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@43fac000 {
+ compatible = "fsl,imx35-iomuxc";
+ reg = <0x43fac000 0x4000>;
+ };
+ };
+
+ spba: spba-bus@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x100000>;
+ ranges;
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ clocks = <&clks 9>, <&clks 72>;
+ clock-names = "ipg", "per";
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ spi2: cspi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-cspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <13>;
+ clocks = <&clks 36 &clks 36>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ fec: fec@50038000 {
+ compatible = "fsl,imx35-fec", "fsl,imx27-fec";
+ reg = <0x50038000 0x4000>;
+ clocks = <&clks 46>, <&clks 8>;
+ clock-names = "ipg", "ahb";
+ interrupts = <57>;
+ status = "disabled";
+ };
+ };
+
+ aips2: aips@53f00000 {
+ compatible = "fsl,aips", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x53f00000 0x100000>;
+ ranges;
+
+ clks: ccm@53f80000 {
+ compatible = "fsl,imx35-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ gpio3: gpio@53fa4000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <56>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ esdhc1: esdhc@53fb4000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <7>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@53fb8000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb8000 0x4000>;
+ interrupts = <8>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 44>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc3: esdhc@53fbc000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <9>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 45>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ audmux: audmux@53fc4000 {
+ compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
+ reg = <0x53fc4000 0x4000>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@53fcc000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <52>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53fd0000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fd0000 0x4000>;
+ interrupts = <51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sdma: sdma@53fd4000 {
+ compatible = "fsl,imx35-sdma";
+ reg = <0x53fd4000 0x4000>;
+ clocks = <&clks 9>, <&clks 65>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ interrupts = <34>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
+ };
+
+ wdog: wdog@53fdc000 {
+ compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
+ reg = <0x53fdc000 0x4000>;
+ clocks = <&clks 74>;
+ clock-names = "";
+ interrupts = <55>;
+ };
+
+ can1: can@53fe4000 {
+ compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fe4000 0x1000>;
+ clocks = <&clks 33>;
+ clock-names = "ipg";
+ interrupts = <43>;
+ status = "disabled";
+ };
+
+ can2: can@53fe8000 {
+ compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fe8000 0x1000>;
+ clocks = <&clks 34>;
+ clock-names = "ipg";
+ interrupts = <44>;
+ status = "disabled";
+ };
+
+ usbotg: usb@53ff4000 {
+ compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+ reg = <0x53ff4000 0x0200>;
+ interrupts = <37>;
+ clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 0>;
+ status = "disabled";
+ };
+
+ usbhost1: usb@53ff4400 {
+ compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+ reg = <0x53ff4400 0x0200>;
+ interrupts = <35>;
+ clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@53ff4600 {
+ #index-cells = <1>;
+ compatible = "fsl,imx35-usbmisc";
+ clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+ clock-names = "ipg", "ahb", "per";
+ reg = <0x53ff4600 0x00f>;
+ };
+ };
+
+ emi@80000000 { /* External Memory Interface */
+ compatible = "fsl,emi", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x40000000>;
+ ranges;
+
+ nfc: nand@bb000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx35-nand", "fsl,imx25-nand";
+ reg = <0xbb000000 0x2000>;
+ clocks = <&clks 29>;
+ clock-names = "";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ weim: weim@b8002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&clks 0>;
+ compatible = "fsl,imx35-weim", "fsl,imx27-weim";
+ reg = <0xb8002000 0x1000>;
+ ranges = <
+ 0 0 0xa0000000 0x8000000
+ 1 0 0xa8000000 0x8000000
+ 2 0 0xb0000000 0x2000000
+ 3 0 0xb2000000 0x2000000
+ 4 0 0xb4000000 0x2000000
+ 5 0 0xb6000000 0x2000000
+ >;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
new file mode 100644
index 0000000..1b22512
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx50.dtsi"
+
+/ {
+ model = "Freescale i.MX50 Evaluation Kit";
+ compatible = "fsl,imx50-evk", "fsl,imx50";
+
+ memory {
+ reg = <0x70000000 0x80000000>;
+ };
+};
+
+&cspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi>;
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
+ status = "okay";
+
+ flash: m25p32@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p32", "m25p80";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "kernel";
+ reg = <0x100000 0x300000>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio4 12 0>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx50-evk {
+ pinctrl_cspi: cspigrp {
+ fsl,pins = <
+ MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00
+ MX50_PAD_CSPI_MISO__CSPI_MISO 0x00
+ MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00
+ MX50_PAD_CSPI_SS0__GPIO4_11 0xc4
+ MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0xf4
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX50_PAD_SSI_RXFS__FEC_MDC 0x80
+ MX50_PAD_SSI_RXC__FEC_MDIO 0x80
+ MX50_PAD_DISP_D0__FEC_TX_CLK 0x80
+ MX50_PAD_DISP_D1__FEC_RX_ERR 0x80
+ MX50_PAD_DISP_D2__FEC_RX_DV 0x80
+ MX50_PAD_DISP_D3__FEC_RDATA_1 0x80
+ MX50_PAD_DISP_D4__FEC_RDATA_0 0x80
+ MX50_PAD_DISP_D5__FEC_TX_EN 0x80
+ MX50_PAD_DISP_D6__FEC_TDATA_1 0x80
+ MX50_PAD_DISP_D7__FEC_TDATA_0 0x80
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x1e4
+ MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x1e4
+ MX50_PAD_UART1_RTS__UART1_RTS 0x1e4
+ MX50_PAD_UART1_CTS__UART1_CTS 0x1e4
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbh2 {
+ status = "okay";
+};
+
+&usbh3 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h
new file mode 100644
index 0000000..97e6e7f
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-pinfunc.h
@@ -0,0 +1,923 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX50_PINFUNC_H
+#define __DTS_IMX50_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL1__KPP_COL_1 0x028 0x2d4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL1__GPIO4_2 0x028 0x2d4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0 0x028 0x2d4 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6 0x028 0x2d4 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE 0x028 0x2d4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW1__KPP_ROW_1 0x02c 0x2d8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW1__GPIO4_3 0x02c 0x2d8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1 0x02c 0x2d8 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7 0x02c 0x2d8 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR 0x02c 0x2d8 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_1 0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__GPIO4_4 0x030 0x2dc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2 0x030 0x2dc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6 0x030 0x2dc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK 0x030 0x2dc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW2__KPP_ROW_2 0x034 0x2e0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW2__GPIO4_5 0x034 0x2e0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3 0x034 0x2e0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7 0x034 0x2e0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0 0x034 0x2e0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_2 0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__GPIO4_6 0x038 0x2e4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0 0x038 0x2e4 0x7b4 0x2 0x0
+#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0 0x038 0x2e4 0x7b8 0x6 0x0
+#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1 0x038 0x2e4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW3__KPP_ROW_3 0x03c 0x2e8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW3__GPIO4_7 0x03c 0x2e8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS 0x03c 0x2e8 0x7b0 0x2 0x0
+#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1 0x03c 0x2e8 0x7bc 0x6 0x0
+#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID 0x03c 0x2e8 0x000 0x7 0x0
+#define MX50_PAD_I2C1_SCL__I2C1_SCL 0x040 0x2ec 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SCL__GPIO6_18 0x040 0x2ec 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX 0x040 0x2ec 0x7cc 0x2 0x0
+#define MX50_PAD_I2C1_SDA__I2C1_SDA 0x044 0x2f0 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SDA__GPIO6_19 0x044 0x2f0 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX 0x044 0x2f0 0x7cc 0x2 0x1
+#define MX50_PAD_I2C2_SCL__I2C2_SCL 0x048 0x2f4 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SCL__GPIO6_20 0x048 0x2f4 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SCL__UART2_CTS 0x048 0x2f4 0x000 0x2 0x0
+#define MX50_PAD_I2C2_SDA__I2C2_SDA 0x04c 0x2f8 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SDA__GPIO6_21 0x04c 0x2f8 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SDA__UART2_RTS 0x04c 0x2f8 0x7c8 0x2 0x1
+#define MX50_PAD_I2C3_SCL__I2C3_SCL 0x050 0x2fc 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SCL__GPIO6_22 0x050 0x2fc 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SCL__FEC_MDC 0x050 0x2fc 0x000 0x2 0x0
+#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY 0x050 0x2fc 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SCL__GPT_CAPIN1 0x050 0x2fc 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0 0x050 0x2fc 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC 0x050 0x2fc 0x7e8 0x7 0x0
+#define MX50_PAD_I2C3_SDA__I2C3_SDA 0x054 0x300 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SDA__GPIO6_23 0x054 0x300 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SDA__FEC_MDIO 0x054 0x300 0x774 0x2 0x0
+#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT 0x054 0x300 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB 0x054 0x300 0x000 0x4 0x0
+#define MX50_PAD_I2C3_SDA__GPT_CAPIN2 0x054 0x300 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1 0x054 0x300 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR 0x054 0x300 0x000 0x7 0x0
+#define MX50_PAD_PWM1__PWM1_PWMO 0x058 0x304 0x000 0x0 0x0
+#define MX50_PAD_PWM1__GPIO6_24 0x058 0x304 0x000 0x1 0x0
+#define MX50_PAD_PWM1__USBOH1_USBOTG_OC 0x058 0x304 0x7e8 0x2 0x1
+#define MX50_PAD_PWM1__GPT_CMPOUT1 0x058 0x304 0x000 0x5 0x0
+#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2 0x058 0x304 0x000 0x6 0x0
+#define MX50_PAD_PWM1__SJC_FAIL 0x058 0x304 0x000 0x7 0x0
+#define MX50_PAD_PWM2__PWM2_PWMO 0x05c 0x308 0x000 0x0 0x0
+#define MX50_PAD_PWM2__GPIO6_25 0x05c 0x308 0x000 0x1 0x0
+#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR 0x05c 0x308 0x000 0x2 0x0
+#define MX50_PAD_PWM2__GPT_CMPOUT2 0x05c 0x308 0x000 0x5 0x0
+#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3 0x05c 0x308 0x000 0x6 0x0
+#define MX50_PAD_PWM2__SRC_ANY_PU_RST 0x05c 0x308 0x000 0x7 0x0
+#define MX50_PAD_OWIRE__OWIRE_LINE 0x060 0x30c 0x000 0x0 0x0
+#define MX50_PAD_OWIRE__GPIO6_26 0x060 0x30c 0x000 0x1 0x0
+#define MX50_PAD_OWIRE__USBOH1_USBH1_OC 0x060 0x30c 0x000 0x2 0x0
+#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK 0x060 0x30c 0x000 0x3 0x0
+#define MX50_PAD_OWIRE__EPDC_PWRIRQ 0x060 0x30c 0x000 0x4 0x0
+#define MX50_PAD_OWIRE__GPT_CMPOUT3 0x060 0x30c 0x000 0x5 0x0
+#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4 0x060 0x30c 0x000 0x6 0x0
+#define MX50_PAD_OWIRE__SJC_JTAG_ACT 0x060 0x30c 0x000 0x7 0x0
+#define MX50_PAD_EPITO__EPIT1_EPITO 0x064 0x310 0x000 0x0 0x0
+#define MX50_PAD_EPITO__GPIO6_27 0x064 0x310 0x000 0x1 0x0
+#define MX50_PAD_EPITO__USBOH1_USBH1_PWR 0x064 0x310 0x000 0x2 0x0
+#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK 0x064 0x310 0x000 0x3 0x0
+#define MX50_PAD_EPITO__DPLLIP1_TOG_EN 0x064 0x310 0x000 0x4 0x0
+#define MX50_PAD_EPITO__GPT_CLK_IN 0x064 0x310 0x000 0x5 0x0
+#define MX50_PAD_EPITO__PMU_IRQ_B 0x064 0x310 0x000 0x6 0x0
+#define MX50_PAD_EPITO__SJC_DE_B 0x064 0x310 0x000 0x7 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_B 0x068 0x314 0x000 0x0 0x0
+#define MX50_PAD_WDOG__GPIO6_28 0x068 0x314 0x000 0x1 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB 0x068 0x314 0x000 0x2 0x0
+#define MX50_PAD_WDOG__CCM_XTAL32K 0x068 0x314 0x000 0x6 0x0
+#define MX50_PAD_WDOG__SJC_DONE 0x068 0x314 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS 0x06c 0x318 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXFS__GPIO6_0 0x06c 0x318 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1 0x06c 0x318 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8 0x06c 0x318 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC 0x070 0x31c 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXC__GPIO6_1 0x070 0x31c 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0 0x070 0x31c 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9 0x070 0x31c 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD 0x074 0x320 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXD__GPIO6_2 0x074 0x320 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXD__CSPI_RDY 0x074 0x320 0x6e8 0x4 0x0
+#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10 0x074 0x320 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD 0x078 0x324 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXD__GPIO6_3 0x078 0x324 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXD__CSPI_SS3 0x078 0x324 0x6f4 0x4 0x0
+#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11 0x078 0x324 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS 0x07c 0x328 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXFS__GPIO6_4 0x07c 0x328 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX 0x07c 0x328 0x7e4 0x2 0x0
+#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6 0x07c 0x328 0x804 0x3 0x0
+#define MX50_PAD_SSI_RXFS__CSPI_SS2 0x07c 0x328 0x6f0 0x4 0x0
+#define MX50_PAD_SSI_RXFS__FEC_COL 0x07c 0x328 0x770 0x5 0x0
+#define MX50_PAD_SSI_RXFS__FEC_MDC 0x07c 0x328 0x000 0x6 0x0
+#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12 0x07c 0x328 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC 0x080 0x32c 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXC__GPIO6_5 0x080 0x32c 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXC__UART5_RXD_MUX 0x080 0x32c 0x7e4 0x2 0x1
+#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7 0x080 0x32c 0x808 0x3 0x0
+#define MX50_PAD_SSI_RXC__CSPI_SS1 0x080 0x32c 0x6ec 0x4 0x0
+#define MX50_PAD_SSI_RXC__FEC_RX_CLK 0x080 0x32c 0x780 0x5 0x0
+#define MX50_PAD_SSI_RXC__FEC_MDIO 0x080 0x32c 0x774 0x6 0x1
+#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13 0x080 0x32c 0x000 0x7 0x0
+#define MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x084 0x330 0x7c4 0x0 0x0
+#define MX50_PAD_UART1_TXD__GPIO6_6 0x084 0x330 0x000 0x1 0x0
+#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14 0x084 0x330 0x000 0x7 0x0
+#define MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x088 0x334 0x7c4 0x0 0x1
+#define MX50_PAD_UART1_RXD__GPIO6_7 0x088 0x334 0x000 0x1 0x0
+#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15 0x088 0x334 0x000 0x7 0x0
+#define MX50_PAD_UART1_CTS__UART1_CTS 0x08c 0x338 0x000 0x0 0x0
+#define MX50_PAD_UART1_CTS__GPIO6_8 0x08c 0x338 0x000 0x1 0x0
+#define MX50_PAD_UART1_CTS__UART5_TXD_MUX 0x08c 0x338 0x7e4 0x2 0x2
+#define MX50_PAD_UART1_CTS__ESDHC4_DAT4 0x08c 0x338 0x760 0x4 0x0
+#define MX50_PAD_UART1_CTS__ESDHC4_CMD 0x08c 0x338 0x74c 0x5 0x0
+#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8 0x08c 0x338 0x000 0x7 0x0
+#define MX50_PAD_UART1_RTS__UART1_RTS 0x090 0x33c 0x7c0 0x0 0x3
+#define MX50_PAD_UART1_RTS__GPIO6_9 0x090 0x33c 0x000 0x1 0x0
+#define MX50_PAD_UART1_RTS__UART5_RXD_MUX 0x090 0x33c 0x7e4 0x2 0x3
+#define MX50_PAD_UART1_RTS__ESDHC4_DAT5 0x090 0x33c 0x764 0x4 0x0
+#define MX50_PAD_UART1_RTS__ESDHC4_CLK 0x090 0x33c 0x748 0x5 0x0
+#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9 0x090 0x33c 0x000 0x7 0x0
+#define MX50_PAD_UART2_TXD__UART2_TXD_MUX 0x094 0x340 0x7cc 0x0 0x2
+#define MX50_PAD_UART2_TXD__GPIO6_10 0x094 0x340 0x000 0x1 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT6 0x094 0x340 0x768 0x4 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT4 0x094 0x340 0x760 0x5 0x1
+#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10 0x094 0x340 0x000 0x7 0x0
+#define MX50_PAD_UART2_RXD__UART2_RXD_MUX 0x098 0x344 0x7cc 0x0 0x3
+#define MX50_PAD_UART2_RXD__GPIO6_11 0x098 0x344 0x000 0x1 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT7 0x098 0x344 0x76c 0x4 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT5 0x098 0x344 0x764 0x5 0x1
+#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11 0x098 0x344 0x000 0x7 0x0
+#define MX50_PAD_UART2_CTS__UART2_CTS 0x09c 0x348 0x000 0x0 0x0
+#define MX50_PAD_UART2_CTS__GPIO6_12 0x09c 0x348 0x000 0x1 0x0
+#define MX50_PAD_UART2_CTS__ESDHC4_CMD 0x09c 0x348 0x74c 0x4 0x1
+#define MX50_PAD_UART2_CTS__ESDHC4_DAT6 0x09c 0x348 0x768 0x5 0x1
+#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12 0x09c 0x348 0x000 0x7 0x0
+#define MX50_PAD_UART2_RTS__UART2_RTS 0x0a0 0x34c 0x7c8 0x0 0x2
+#define MX50_PAD_UART2_RTS__GPIO6_13 0x0a0 0x34c 0x000 0x1 0x0
+#define MX50_PAD_UART2_RTS__ESDHC4_CLK 0x0a0 0x34c 0x748 0x4 0x1
+#define MX50_PAD_UART2_RTS__ESDHC4_DAT7 0x0a0 0x34c 0x76c 0x5 0x1
+#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13 0x0a0 0x34c 0x000 0x7 0x0
+#define MX50_PAD_UART3_TXD__UART3_TXD_MUX 0x0a4 0x350 0x7d4 0x0 0x0
+#define MX50_PAD_UART3_TXD__GPIO6_14 0x0a4 0x350 0x000 0x1 0x0
+#define MX50_PAD_UART3_TXD__ESDHC1_DAT4 0x0a4 0x350 0x000 0x3 0x0
+#define MX50_PAD_UART3_TXD__ESDHC4_DAT0 0x0a4 0x350 0x000 0x4 0x0
+#define MX50_PAD_UART3_TXD__ESDHC2_WP 0x0a4 0x350 0x744 0x5 0x0
+#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12 0x0a4 0x350 0x81c 0x6 0x0
+#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14 0x0a4 0x350 0x000 0x7 0x0
+#define MX50_PAD_UART3_RXD__UART3_RXD_MUX 0x0a8 0x354 0x7d4 0x0 0x1
+#define MX50_PAD_UART3_RXD__GPIO6_15 0x0a8 0x354 0x000 0x1 0x0
+#define MX50_PAD_UART3_RXD__ESDHC1_DAT5 0x0a8 0x354 0x000 0x3 0x0
+#define MX50_PAD_UART3_RXD__ESDHC4_DAT1 0x0a8 0x354 0x754 0x4 0x0
+#define MX50_PAD_UART3_RXD__ESDHC2_CD 0x0a8 0x354 0x740 0x5 0x0
+#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13 0x0a8 0x354 0x820 0x6 0x0
+#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15 0x0a8 0x354 0x000 0x7 0x0
+#define MX50_PAD_UART4_TXD__UART4_TXD_MUX 0x0ac 0x358 0x7dc 0x0 0x0
+#define MX50_PAD_UART4_TXD__GPIO6_16 0x0ac 0x358 0x000 0x1 0x0
+#define MX50_PAD_UART4_TXD__UART3_CTS 0x0ac 0x358 0x7d0 0x2 0x0
+#define MX50_PAD_UART4_TXD__ESDHC1_DAT6 0x0ac 0x358 0x000 0x3 0x0
+#define MX50_PAD_UART4_TXD__ESDHC4_DAT2 0x0ac 0x358 0x758 0x4 0x0
+#define MX50_PAD_UART4_TXD__ESDHC2_LCTL 0x0ac 0x358 0x000 0x5 0x0
+#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14 0x0ac 0x358 0x824 0x6 0x0
+#define MX50_PAD_UART4_RXD__UART4_RXD_MUX 0x0b0 0x35c 0x7dc 0x0 0x1
+#define MX50_PAD_UART4_RXD__GPIO6_17 0x0b0 0x35c 0x000 0x1 0x0
+#define MX50_PAD_UART4_RXD__UART3_RTS 0x0b0 0x35c 0x7d0 0x2 0x1
+#define MX50_PAD_UART4_RXD__ESDHC1_DAT7 0x0b0 0x35c 0x000 0x3 0x0
+#define MX50_PAD_UART4_RXD__ESDHC4_DAT3 0x0b0 0x35c 0x75c 0x4 0x0
+#define MX50_PAD_UART4_RXD__ESDHC1_LCTL 0x0b0 0x35c 0x000 0x5 0x0
+#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15 0x0b0 0x35c 0x828 0x6 0x0
+#define MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x0b4 0x360 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SCLK__GPIO4_8 0x0b4 0x360 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x0b8 0x364 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MOSI__GPIO4_9 0x0b8 0x364 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MISO__CSPI_MISO 0x0bc 0x368 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MISO__GPIO4_10 0x0bc 0x368 0x000 0x1 0x0
+#define MX50_PAD_CSPI_SS0__CSPI_SS0 0x0c0 0x36c 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SS0__GPIO4_11 0x0c0 0x36c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x0c4 0x370 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SCLK__GPIO4_12 0x0c4 0x370 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY 0x0c4 0x370 0x6e8 0x2 0x1
+#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY 0x0c4 0x370 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SCLK__UART3_RTS 0x0c4 0x370 0x7d0 0x4 0x2
+#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6 0x0c4 0x370 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8 0x0c4 0x370 0x80c 0x7 0x0
+#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x0c8 0x374 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x0c8 0x374 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0x0c8 0x374 0x6ec 0x2 0x1
+#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1 0x0c8 0x374 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS 0x0c8 0x374 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7 0x0c8 0x374 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9 0x0c8 0x374 0x810 0x7 0x0
+#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO 0x0cc 0x378 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MISO__GPIO4_14 0x0cc 0x378 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MISO__CSPI_SS2 0x0cc 0x378 0x6f0 0x2 0x1
+#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2 0x0cc 0x378 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MISO__UART4_RTS 0x0cc 0x378 0x7d8 0x4 0x0
+#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8 0x0cc 0x378 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10 0x0cc 0x378 0x814 0x7 0x0
+#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0 0x0d0 0x37c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SS0__GPIO4_15 0x0d0 0x37c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SS0__CSPI_SS3 0x0d0 0x37c 0x6f4 0x2 0x1
+#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3 0x0d0 0x37c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS 0x0d0 0x37c 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9 0x0d0 0x37c 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11 0x0d0 0x37c 0x818 0x7 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x0d4 0x380 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SCLK__GPIO4_16 0x0d4 0x380 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN 0x0d4 0x380 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY 0x0d4 0x380 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SCLK__UART5_RTS 0x0d4 0x380 0x7e0 0x4 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK 0x0d4 0x380 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4 0x0d4 0x380 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8 0x0d4 0x380 0x80c 0x7 0x1
+#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x0d8 0x384 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MOSI__GPIO4_17 0x0d8 0x384 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E 0x0d8 0x384 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1 0x0d8 0x384 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS 0x0d8 0x384 0x7e0 0x4 0x1
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE 0x0d8 0x384 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5 0x0d8 0x384 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9 0x0d8 0x384 0x810 0x7 0x1
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO 0x0dc 0x388 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MISO__GPIO4_18 0x0dc 0x388 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS 0x0dc 0x388 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2 0x0dc 0x388 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX 0x0dc 0x388 0x7e4 0x4 0x4
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC 0x0dc 0x388 0x73c 0x5 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6 0x0dc 0x388 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10 0x0dc 0x388 0x814 0x7 0x1
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0 0x0e0 0x38c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SS0__GPIO4_19 0x0e0 0x38c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS 0x0e0 0x38c 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3 0x0e0 0x38c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX 0x0e0 0x38c 0x7e4 0x4 0x5
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC 0x0e0 0x38c 0x6f8 0x5 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7 0x0e0 0x38c 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11 0x0e0 0x38c 0x818 0x7 0x1
+#define MX50_PAD_SD1_CLK__ESDHC1_CLK 0x0e4 0x390 0x000 0x0 0x0
+#define MX50_PAD_SD1_CLK__GPIO5_0 0x0e4 0x390 0x000 0x1 0x0
+#define MX50_PAD_SD1_CLK__CCM_CLKO 0x0e4 0x390 0x000 0x7 0x0
+#define MX50_PAD_SD1_CMD__ESDHC1_CMD 0x0e8 0x394 0x000 0x0 0x0
+#define MX50_PAD_SD1_CMD__GPIO5_1 0x0e8 0x394 0x000 0x1 0x0
+#define MX50_PAD_SD1_CMD__CCM_CLKO2 0x0e8 0x394 0x000 0x7 0x0
+#define MX50_PAD_SD1_D0__ESDHC1_DAT0 0x0ec 0x398 0x000 0x0 0x0
+#define MX50_PAD_SD1_D0__GPIO5_2 0x0ec 0x398 0x000 0x1 0x0
+#define MX50_PAD_SD1_D0__CCM_PLL1_BYP 0x0ec 0x398 0x6dc 0x7 0x0
+#define MX50_PAD_SD1_D1__ESDHC1_DAT1 0x0f0 0x39c 0x000 0x0 0x0
+#define MX50_PAD_SD1_D1__GPIO5_3 0x0f0 0x39c 0x000 0x1 0x0
+#define MX50_PAD_SD1_D1__CCM_PLL2_BYP 0x0f0 0x39c 0x000 0x7 0x0
+#define MX50_PAD_SD1_D2__ESDHC1_DAT2 0x0f4 0x3a0 0x000 0x0 0x0
+#define MX50_PAD_SD1_D2__GPIO5_4 0x0f4 0x3a0 0x000 0x1 0x0
+#define MX50_PAD_SD1_D2__CCM_PLL3_BYP 0x0f4 0x3a0 0x6e4 0x7 0x0
+#define MX50_PAD_SD1_D3__ESDHC1_DAT3 0x0f8 0x3a4 0x000 0x0 0x0
+#define MX50_PAD_SD1_D3__GPIO5_5 0x0f8 0x3a4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__ESDHC2_CLK 0x0fc 0x3a8 0x000 0x0 0x0
+#define MX50_PAD_SD2_CLK__GPIO5_6 0x0fc 0x3a8 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__MSHC_SCLK 0x0fc 0x3a8 0x000 0x2 0x0
+#define MX50_PAD_SD2_CMD__ESDHC2_CMD 0x100 0x3ac 0x000 0x0 0x0
+#define MX50_PAD_SD2_CMD__GPIO5_7 0x100 0x3ac 0x000 0x1 0x0
+#define MX50_PAD_SD2_CMD__MSHC_BS 0x100 0x3ac 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__ESDHC2_DAT0 0x104 0x3b0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D0__GPIO5_8 0x104 0x3b0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D0__MSHC_DATA_0 0x104 0x3b0 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__KPP_COL_4 0x104 0x3b0 0x790 0x3 0x0
+#define MX50_PAD_SD2_D1__ESDHC2_DAT1 0x108 0x3b4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D1__GPIO5_9 0x108 0x3b4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D1__MSHC_DATA_1 0x108 0x3b4 0x000 0x2 0x0
+#define MX50_PAD_SD2_D1__KPP_ROW_4 0x108 0x3b4 0x7a0 0x3 0x0
+#define MX50_PAD_SD2_D2__ESDHC2_DAT2 0x10c 0x3b8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D2__GPIO5_10 0x10c 0x3b8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D2__MSHC_DATA_2 0x10c 0x3b8 0x000 0x2 0x0
+#define MX50_PAD_SD2_D2__KPP_COL_5 0x10c 0x3b8 0x794 0x3 0x0
+#define MX50_PAD_SD2_D3__ESDHC2_DAT3 0x110 0x3bc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D3__GPIO5_11 0x110 0x3bc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D3__MSHC_DATA_3 0x110 0x3bc 0x000 0x2 0x0
+#define MX50_PAD_SD2_D3__KPP_ROW_5 0x110 0x3bc 0x7a4 0x3 0x0
+#define MX50_PAD_SD2_D4__ESDHC2_DAT4 0x114 0x3c0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D4__GPIO5_12 0x114 0x3c0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS 0x114 0x3c0 0x6d0 0x2 0x0
+#define MX50_PAD_SD2_D4__KPP_COL_6 0x114 0x3c0 0x798 0x3 0x0
+#define MX50_PAD_SD2_D4__EIM_WEIM_D_0 0x114 0x3c0 0x7ec 0x4 0x0
+#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0 0x114 0x3c0 0x000 0x7 0x0
+#define MX50_PAD_SD2_D5__ESDHC2_DAT5 0x118 0x3c4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D5__GPIO5_13 0x118 0x3c4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC 0x118 0x3c4 0x6cc 0x2 0x0
+#define MX50_PAD_SD2_D5__KPP_ROW_6 0x118 0x3c4 0x7a8 0x3 0x0
+#define MX50_PAD_SD2_D5__EIM_WEIM_D_1 0x118 0x3c4 0x7f0 0x4 0x0
+#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1 0x118 0x3c4 0x000 0x7 0x0
+#define MX50_PAD_SD2_D6__ESDHC2_DAT6 0x11c 0x3c8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D6__GPIO5_14 0x11c 0x3c8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD 0x11c 0x3c8 0x6c4 0x2 0x0
+#define MX50_PAD_SD2_D6__KPP_COL_7 0x11c 0x3c8 0x79c 0x3 0x0
+#define MX50_PAD_SD2_D6__EIM_WEIM_D_2 0x11c 0x3c8 0x7f4 0x4 0x0
+#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2 0x11c 0x3c8 0x000 0x7 0x0
+#define MX50_PAD_SD2_D7__ESDHC2_DAT7 0x120 0x3cc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D7__GPIO5_15 0x120 0x3cc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS 0x120 0x3cc 0x6d8 0x2 0x0
+#define MX50_PAD_SD2_D7__KPP_ROW_7 0x120 0x3cc 0x7ac 0x3 0x0
+#define MX50_PAD_SD2_D7__EIM_WEIM_D_3 0x120 0x3cc 0x7f8 0x4 0x0
+#define MX50_PAD_SD2_D7__CCM_STOP 0x120 0x3cc 0x000 0x7 0x0
+#define MX50_PAD_SD2_WP__ESDHC2_WP 0x124 0x3d0 0x744 0x0 0x1
+#define MX50_PAD_SD2_WP__GPIO5_16 0x124 0x3d0 0x000 0x1 0x0
+#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD 0x124 0x3d0 0x6c8 0x2 0x0
+#define MX50_PAD_SD2_WP__EIM_WEIM_D_4 0x124 0x3d0 0x7fc 0x4 0x0
+#define MX50_PAD_SD2_WP__CCM_WAIT 0x124 0x3d0 0x000 0x7 0x0
+#define MX50_PAD_SD2_CD__ESDHC2_CD 0x128 0x3d4 0x740 0x0 0x1
+#define MX50_PAD_SD2_CD__GPIO5_17 0x128 0x3d4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC 0x128 0x3d4 0x6d4 0x2 0x0
+#define MX50_PAD_SD2_CD__EIM_WEIM_D_5 0x128 0x3d4 0x800 0x4 0x0
+#define MX50_PAD_SD2_CD__CCM_REF_EN_B 0x128 0x3d4 0x000 0x7 0x0
+#define MX50_PAD_DISP_D0__ELCDIF_DAT_0 0x12c 0x40c 0x6fc 0x0 0x0
+#define MX50_PAD_DISP_D0__GPIO2_0 0x12c 0x40c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D0__FEC_TX_CLK 0x12c 0x40c 0x78c 0x2 0x0
+#define MX50_PAD_DISP_D0__EIM_WEIM_A_16 0x12c 0x40c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0 0x12c 0x40c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0 0x12c 0x40c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D1__ELCDIF_DAT_1 0x130 0x410 0x700 0x0 0x0
+#define MX50_PAD_DISP_D1__GPIO2_1 0x130 0x410 0x000 0x1 0x0
+#define MX50_PAD_DISP_D1__FEC_RX_ERR 0x130 0x410 0x788 0x2 0x0
+#define MX50_PAD_DISP_D1__EIM_WEIM_A_17 0x130 0x410 0x000 0x3 0x0
+#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1 0x130 0x410 0x000 0x6 0x0
+#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1 0x130 0x410 0x000 0x7 0x0
+#define MX50_PAD_DISP_D2__ELCDIF_DAT_2 0x134 0x414 0x704 0x0 0x0
+#define MX50_PAD_DISP_D2__GPIO2_2 0x134 0x414 0x000 0x1 0x0
+#define MX50_PAD_DISP_D2__FEC_RX_DV 0x134 0x414 0x784 0x2 0x0
+#define MX50_PAD_DISP_D2__EIM_WEIM_A_18 0x134 0x414 0x000 0x3 0x0
+#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2 0x134 0x414 0x000 0x6 0x0
+#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2 0x134 0x414 0x000 0x7 0x0
+#define MX50_PAD_DISP_D3__ELCDIF_DAT_3 0x138 0x418 0x708 0x0 0x0
+#define MX50_PAD_DISP_D3__GPIO2_3 0x138 0x418 0x000 0x1 0x0
+#define MX50_PAD_DISP_D3__FEC_RDATA_1 0x138 0x418 0x77c 0x2 0x0
+#define MX50_PAD_DISP_D3__EIM_WEIM_A_19 0x138 0x418 0x000 0x3 0x0
+#define MX50_PAD_DISP_D3__FEC_COL 0x138 0x418 0x770 0x4 0x1
+#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3 0x138 0x418 0x000 0x6 0x0
+#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3 0x138 0x418 0x000 0x7 0x0
+#define MX50_PAD_DISP_D4__ELCDIF_DAT_4 0x13c 0x41c 0x70c 0x0 0x0
+#define MX50_PAD_DISP_D4__GPIO2_4 0x13c 0x41c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D4__FEC_RDATA_0 0x13c 0x41c 0x778 0x2 0x0
+#define MX50_PAD_DISP_D4__EIM_WEIM_A_20 0x13c 0x41c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4 0x13c 0x41c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4 0x13c 0x41c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D5__ELCDIF_DAT_5 0x140 0x420 0x710 0x0 0x0
+#define MX50_PAD_DISP_D5__GPIO2_5 0x140 0x420 0x000 0x1 0x0
+#define MX50_PAD_DISP_D5__FEC_TX_EN 0x140 0x420 0x000 0x2 0x0
+#define MX50_PAD_DISP_D5__EIM_WEIM_A_21 0x140 0x420 0x000 0x3 0x0
+#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5 0x140 0x420 0x000 0x6 0x0
+#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5 0x140 0x420 0x000 0x7 0x0
+#define MX50_PAD_DISP_D6__ELCDIF_DAT_6 0x144 0x424 0x714 0x0 0x0
+#define MX50_PAD_DISP_D6__GPIO2_6 0x144 0x424 0x000 0x1 0x0
+#define MX50_PAD_DISP_D6__FEC_TDATA_1 0x144 0x424 0x000 0x2 0x0
+#define MX50_PAD_DISP_D6__EIM_WEIM_A_22 0x144 0x424 0x000 0x3 0x0
+#define MX50_PAD_DISP_D6__FEC_RX_CLK 0x144 0x424 0x780 0x4 0x1
+#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6 0x144 0x424 0x000 0x6 0x0
+#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6 0x144 0x424 0x000 0x7 0x0
+#define MX50_PAD_DISP_D7__ELCDIF_DAT_7 0x148 0x428 0x718 0x0 0x0
+#define MX50_PAD_DISP_D7__GPIO2_7 0x148 0x428 0x000 0x1 0x0
+#define MX50_PAD_DISP_D7__FEC_TDATA_0 0x148 0x428 0x000 0x2 0x0
+#define MX50_PAD_DISP_D7__EIM_WEIM_A_23 0x148 0x428 0x000 0x3 0x0
+#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7 0x148 0x428 0x000 0x6 0x0
+#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7 0x148 0x428 0x000 0x7 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN 0x14c 0x42c 0x000 0x0 0x0
+#define MX50_PAD_DISP_WR__GPIO2_16 0x14c 0x42c 0x000 0x1 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK 0x14c 0x42c 0x000 0x2 0x0
+#define MX50_PAD_DISP_WR__EIM_WEIM_A_24 0x14c 0x42c 0x000 0x3 0x0
+#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8 0x14c 0x42c 0x000 0x6 0x0
+#define MX50_PAD_DISP_WR__USBPHY1_AVALID 0x14c 0x42c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_RD_E 0x150 0x430 0x000 0x0 0x0
+#define MX50_PAD_DISP_RD__GPIO2_19 0x150 0x430 0x000 0x1 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_ENABLE 0x150 0x430 0x000 0x2 0x0
+#define MX50_PAD_DISP_RD__EIM_WEIM_A_25 0x150 0x430 0x000 0x3 0x0
+#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9 0x150 0x430 0x000 0x6 0x0
+#define MX50_PAD_DISP_RD__USBPHY1_BVALID 0x150 0x430 0x000 0x7 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_RS 0x154 0x434 0x000 0x0 0x0
+#define MX50_PAD_DISP_RS__GPIO2_17 0x154 0x434 0x000 0x1 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_VSYNC 0x154 0x434 0x73c 0x2 0x1
+#define MX50_PAD_DISP_RS__EIM_WEIM_A_26 0x154 0x434 0x000 0x3 0x0
+#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10 0x154 0x434 0x000 0x6 0x0
+#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION 0x154 0x434 0x000 0x7 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_CS 0x158 0x438 0x000 0x0 0x0
+#define MX50_PAD_DISP_CS__GPIO2_21 0x158 0x438 0x000 0x1 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_HSYNC 0x158 0x438 0x6f8 0x2 0x1
+#define MX50_PAD_DISP_CS__EIM_WEIM_A_27 0x158 0x438 0x000 0x3 0x0
+#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3 0x158 0x438 0x000 0x4 0x0
+#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11 0x158 0x438 0x000 0x6 0x0
+#define MX50_PAD_DISP_CS__USBPHY1_IDDIG 0x158 0x438 0x000 0x7 0x0
+#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY 0x15c 0x43c 0x6f8 0x0 0x2
+#define MX50_PAD_DISP_BUSY__GPIO2_18 0x15c 0x43c 0x000 0x1 0x0
+#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3 0x15c 0x43c 0x000 0x4 0x0
+#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12 0x15c 0x43c 0x000 0x6 0x0
+#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT 0x15c 0x43c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RESET__ELCDIF_RESET 0x160 0x440 0x000 0x0 0x0
+#define MX50_PAD_DISP_RESET__GPIO2_20 0x160 0x440 0x000 0x1 0x0
+#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3 0x160 0x440 0x000 0x4 0x0
+#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13 0x160 0x440 0x000 0x6 0x0
+#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK 0x160 0x440 0x000 0x7 0x0
+#define MX50_PAD_SD3_CMD__ESDHC3_CMD 0x164 0x444 0x000 0x0 0x0
+#define MX50_PAD_SD3_CMD__GPIO5_18 0x164 0x444 0x000 0x1 0x0
+#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN 0x164 0x444 0x000 0x2 0x0
+#define MX50_PAD_SD3_CMD__SSP_CMD 0x164 0x444 0x000 0x3 0x0
+#define MX50_PAD_SD3_CLK__ESDHC3_CLK 0x168 0x448 0x000 0x0 0x0
+#define MX50_PAD_SD3_CLK__GPIO5_19 0x168 0x448 0x000 0x1 0x0
+#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN 0x168 0x448 0x000 0x2 0x0
+#define MX50_PAD_SD3_CLK__SSP_CLK 0x168 0x448 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__ESDHC3_DAT0 0x16c 0x44c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D0__GPIO5_20 0x16c 0x44c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D0__EIM_NANDF_D_4 0x16c 0x44c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D0__SSP_D0 0x16c 0x44c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__CCM_PLL1_BYP 0x16c 0x44c 0x6dc 0x7 0x1
+#define MX50_PAD_SD3_D1__ESDHC3_DAT1 0x170 0x450 0x000 0x0 0x0
+#define MX50_PAD_SD3_D1__GPIO5_21 0x170 0x450 0x000 0x1 0x0
+#define MX50_PAD_SD3_D1__EIM_NANDF_D_5 0x170 0x450 0x000 0x2 0x0
+#define MX50_PAD_SD3_D1__SSP_D1 0x170 0x450 0x000 0x3 0x0
+#define MX50_PAD_SD3_D1__CCM_PLL2_BYP 0x170 0x450 0x000 0x7 0x0
+#define MX50_PAD_SD3_D2__ESDHC3_DAT2 0x174 0x454 0x000 0x0 0x0
+#define MX50_PAD_SD3_D2__GPIO5_22 0x174 0x454 0x000 0x1 0x0
+#define MX50_PAD_SD3_D2__EIM_NANDF_D_6 0x174 0x454 0x000 0x2 0x0
+#define MX50_PAD_SD3_D2__SSP_D2 0x174 0x454 0x000 0x3 0x0
+#define MX50_PAD_SD3_D2__CCM_PLL3_BYP 0x174 0x454 0x6e4 0x7 0x1
+#define MX50_PAD_SD3_D3__ESDHC3_DAT3 0x178 0x458 0x000 0x0 0x0
+#define MX50_PAD_SD3_D3__GPIO5_23 0x178 0x458 0x000 0x1 0x0
+#define MX50_PAD_SD3_D3__EIM_NANDF_D_7 0x178 0x458 0x000 0x2 0x0
+#define MX50_PAD_SD3_D3__SSP_D3 0x178 0x458 0x000 0x3 0x0
+#define MX50_PAD_SD3_D4__ESDHC3_DAT4 0x17c 0x45c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D4__GPIO5_24 0x17c 0x45c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D4__EIM_NANDF_D_0 0x17c 0x45c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D4__SSP_D4 0x17c 0x45c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D5__ESDHC3_DAT5 0x180 0x460 0x000 0x0 0x0
+#define MX50_PAD_SD3_D5__GPIO5_25 0x180 0x460 0x000 0x1 0x0
+#define MX50_PAD_SD3_D5__EIM_NANDF_D_1 0x180 0x460 0x000 0x2 0x0
+#define MX50_PAD_SD3_D5__SSP_D5 0x180 0x460 0x000 0x3 0x0
+#define MX50_PAD_SD3_D6__ESDHC3_DAT6 0x184 0x464 0x000 0x0 0x0
+#define MX50_PAD_SD3_D6__GPIO5_26 0x184 0x464 0x000 0x1 0x0
+#define MX50_PAD_SD3_D6__EIM_NANDF_D_2 0x184 0x464 0x000 0x2 0x0
+#define MX50_PAD_SD3_D6__SSP_D6 0x184 0x464 0x000 0x3 0x0
+#define MX50_PAD_SD3_D7__ESDHC3_DAT7 0x188 0x468 0x000 0x0 0x0
+#define MX50_PAD_SD3_D7__GPIO5_27 0x188 0x468 0x000 0x1 0x0
+#define MX50_PAD_SD3_D7__EIM_NANDF_D_3 0x188 0x468 0x000 0x2 0x0
+#define MX50_PAD_SD3_D7__SSP_D7 0x188 0x468 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC3_WP 0x18c 0x46C 0x000 0x0 0x0
+#define MX50_PAD_SD3_WP__GPIO5_28 0x18c 0x46C 0x000 0x1 0x0
+#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN 0x18c 0x46C 0x000 0x2 0x0
+#define MX50_PAD_SD3_WP__SSP_CD 0x18c 0x46C 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC4_LCTL 0x18c 0x46C 0x000 0x4 0x0
+#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3 0x18c 0x46C 0x000 0x5 0x0
+#define MX50_PAD_DISP_D8__ELCDIF_DAT_8 0x190 0x470 0x71c 0x0 0x0
+#define MX50_PAD_DISP_D8__GPIO2_8 0x190 0x470 0x000 0x1 0x0
+#define MX50_PAD_DISP_D8__EIM_NANDF_CLE 0x190 0x470 0x000 0x2 0x0
+#define MX50_PAD_DISP_D8__ESDHC1_LCTL 0x190 0x470 0x000 0x3 0x0
+#define MX50_PAD_DISP_D8__ESDHC4_CMD 0x190 0x470 0x74c 0x4 0x2
+#define MX50_PAD_DISP_D8__KPP_COL_4 0x190 0x470 0x790 0x5 0x1
+#define MX50_PAD_DISP_D8__FEC_TX_CLK 0x190 0x470 0x78c 0x6 0x1
+#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0 0x190 0x470 0x000 0x7 0x0
+#define MX50_PAD_DISP_D9__ELCDIF_DAT_9 0x194 0x474 0x720 0x0 0x0
+#define MX50_PAD_DISP_D9__GPIO2_9 0x194 0x474 0x000 0x1 0x0
+#define MX50_PAD_DISP_D9__EIM_NANDF_ALE 0x194 0x474 0x000 0x2 0x0
+#define MX50_PAD_DISP_D9__ESDHC2_LCTL 0x194 0x474 0x000 0x3 0x0
+#define MX50_PAD_DISP_D9__ESDHC4_CLK 0x194 0x474 0x748 0x4 0x2
+#define MX50_PAD_DISP_D9__KPP_ROW_4 0x194 0x474 0x7a0 0x5 0x1
+#define MX50_PAD_DISP_D9__FEC_RX_ER 0x194 0x474 0x788 0x6 0x1
+#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1 0x194 0x474 0x000 0x7 0x0
+#define MX50_PAD_DISP_D10__ELCDIF_DAT_10 0x198 0x478 0x724 0x0 0x0
+#define MX50_PAD_DISP_D10__GPIO2_10 0x198 0x478 0x000 0x1 0x0
+#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0 0x198 0x478 0x000 0x2 0x0
+#define MX50_PAD_DISP_D10__ESDHC3_LCTL 0x198 0x478 0x000 0x3 0x0
+#define MX50_PAD_DISP_D10__ESDHC4_DAT0 0x198 0x478 0x000 0x4 0x0
+#define MX50_PAD_DISP_D10__KPP_COL_5 0x198 0x478 0x794 0x5 0x1
+#define MX50_PAD_DISP_D10__FEC_RX_DV 0x198 0x478 0x784 0x6 0x1
+#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2 0x198 0x478 0x000 0x7 0x0
+#define MX50_PAD_DISP_D11__ELCDIF_DAT_11 0x19c 0x47c 0x728 0x0 0x0
+#define MX50_PAD_DISP_D11__GPIO2_11 0x19c 0x47c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1 0x19c 0x47c 0x000 0x2 0x0
+#define MX50_PAD_DISP_D11__ESDHC4_DAT1 0x19c 0x47c 0x754 0x4 0x1
+#define MX50_PAD_DISP_D11__KPP_ROW_5 0x19c 0x47c 0x7a4 0x5 0x1
+#define MX50_PAD_DISP_D11__FEC_RDATA_1 0x19c 0x47c 0x77c 0x6 0x1
+#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3 0x19c 0x47c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D12__ELCDIF_DAT_12 0x1a0 0x480 0x72c 0x0 0x0
+#define MX50_PAD_DISP_D12__GPIO2_12 0x1a0 0x480 0x000 0x1 0x0
+#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2 0x1a0 0x480 0x000 0x2 0x0
+#define MX50_PAD_DISP_D12__ESDHC1_CD 0x1a0 0x480 0x000 0x3 0x0
+#define MX50_PAD_DISP_D12__ESDHC4_DAT2 0x1a0 0x480 0x758 0x4 0x1
+#define MX50_PAD_DISP_D12__KPP_COL_6 0x1a0 0x480 0x798 0x5 0x1
+#define MX50_PAD_DISP_D12__FEC_RDATA_0 0x1a0 0x480 0x778 0x6 0x1
+#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4 0x1a0 0x480 0x000 0x7 0x0
+#define MX50_PAD_DISP_D13__ELCDIF_DAT_13 0x1a4 0x484 0x730 0x0 0x0
+#define MX50_PAD_DISP_D13__GPIO2_13 0x1a4 0x484 0x000 0x1 0x0
+#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3 0x1a4 0x484 0x000 0x2 0x0
+#define MX50_PAD_DISP_D13__ESDHC3_CD 0x1a4 0x484 0x000 0x3 0x0
+#define MX50_PAD_DISP_D13__ESDHC4_DAT3 0x1a4 0x484 0x75c 0x4 0x1
+#define MX50_PAD_DISP_D13__KPP_ROW_6 0x1a4 0x484 0x7a8 0x5 0x1
+#define MX50_PAD_DISP_D13__FEC_TX_EN 0x1a4 0x484 0x000 0x6 0x0
+#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5 0x1a4 0x484 0x000 0x7 0x0
+#define MX50_PAD_DISP_D14__ELCDIF_DAT_14 0x1a8 0x488 0x734 0x0 0x0
+#define MX50_PAD_DISP_D14__GPIO2_14 0x1a8 0x488 0x000 0x1 0x0
+#define MX50_PAD_DISP_D14__EIM_NANDF_READY0 0x1a8 0x488 0x7b4 0x2 0x1
+#define MX50_PAD_DISP_D14__ESDHC1_WP 0x1a8 0x488 0x000 0x3 0x0
+#define MX50_PAD_DISP_D14__ESDHC4_WP 0x1a8 0x488 0x000 0x4 0x0
+#define MX50_PAD_DISP_D14__KPP_COL_7 0x1a8 0x488 0x79c 0x5 0x1
+#define MX50_PAD_DISP_D14__FEC_TDATA_1 0x1a8 0x488 0x000 0x6 0x0
+#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6 0x1a8 0x488 0x000 0x7 0x0
+#define MX50_PAD_DISP_D15__ELCDIF_DAT_15 0x1ac 0x48c 0x738 0x0 0x0
+#define MX50_PAD_DISP_D15__GPIO2_15 0x1ac 0x48c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D15__EIM_NANDF_DQS 0x1ac 0x48c 0x7b0 0x2 0x1
+#define MX50_PAD_DISP_D15__ESDHC3_RST 0x1ac 0x48c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D15__ESDHC4_CD 0x1ac 0x48c 0x000 0x4 0x0
+#define MX50_PAD_DISP_D15__KPP_ROW_7 0x1ac 0x48c 0x7ac 0x5 0x1
+#define MX50_PAD_DISP_D15__FEC_TDATA_0 0x1ac 0x48c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7 0x1ac 0x48c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D0__EPDC_SDDO_0 0x1b0 0x54c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D0__GPIO3_0 0x1b0 0x54c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0 0x1b0 0x54c 0x7ec 0x2 0x1
+#define MX50_PAD_EPDC_D0__ELCDIF_RS 0x1b0 0x54c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK 0x1b0 0x54c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0 0x1b0 0x54c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0 0x1b0 0x54c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D1__EPDC_SDDO_1 0x1b4 0x550 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D1__GPIO3_1 0x1b4 0x550 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1 0x1b4 0x550 0x7f0 0x2 0x1
+#define MX50_PAD_EPDC_D1__ELCDIF_CS 0x1b4 0x550 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE 0x1b4 0x550 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1 0x1b4 0x550 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1 0x1b4 0x550 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D2__EPDC_SDDO_2 0x1b8 0x554 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D2__GPIO3_2 0x1b8 0x554 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2 0x1b8 0x554 0x7f4 0x2 0x1
+#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN 0x1b8 0x554 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC 0x1b8 0x554 0x73c 0x4 0x2
+#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2 0x1b8 0x554 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2 0x1b8 0x554 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D3__EPDC_SDDO_3 0x1bc 0x558 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D3__GPIO3_3 0x1bc 0x558 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3 0x1bc 0x558 0x7f8 0x2 0x1
+#define MX50_PAD_EPDC_D3__ELCDIF_RD_E 0x1bc 0x558 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC 0x1bc 0x558 0x6f8 0x4 0x3
+#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3 0x1bc 0x558 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3 0x1bc 0x558 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D4__EPDC_SDDO_4 0x1c0 0x55c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D4__GPIO3_4 0x1c0 0x55c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4 0x1c0 0x55c 0x7fc 0x2 0x1
+#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4 0x1c0 0x55c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4 0x1c0 0x55c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D5__EPDC_SDDO_5 0x1c4 0x560 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D5__GPIO3_5 0x1c4 0x560 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5 0x1c4 0x560 0x800 0x2 0x1
+#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5 0x1c4 0x560 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5 0x1c4 0x560 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D6__EPDC_SDDO_6 0x1c8 0x564 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D6__GPIO3_6 0x1c8 0x564 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6 0x1c8 0x564 0x804 0x2 0x1
+#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6 0x1c8 0x564 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6 0x1c8 0x564 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D7__EPDC_SDDO_7 0x1cc 0x568 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D7__GPIO3_7 0x1cc 0x568 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7 0x1cc 0x568 0x808 0x2 0x1
+#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7 0x1cc 0x568 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7 0x1cc 0x568 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D8__EPDC_SDDO_8 0x1d0 0x56c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D8__GPIO3_8 0x1d0 0x56c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8 0x1d0 0x56c 0x80c 0x2 0x2
+#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24 0x1d0 0x56c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS 0x1d0 0x56c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0 0x1d0 0x56c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D9__EPDC_SDDO_9 0x1d4 0x570 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D9__GPIO3_9 0x1d4 0x570 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9 0x1d4 0x570 0x810 0x2 0x2
+#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25 0x1d4 0x570 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x1d4 0x570 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1 0x1d4 0x570 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D10__EPDC_SDDO_10 0x1d8 0x574 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D10__GPIO3_10 0x1d8 0x574 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10 0x1d8 0x574 0x814 0x2 0x2
+#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26 0x1d8 0x574 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0 0x1d8 0x574 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2 0x1d8 0x574 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D11__EPDC_SDDO_11 0x1dc 0x578 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D11__GPIO3_11 0x1dc 0x578 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11 0x1dc 0x578 0x818 0x2 0x2
+#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27 0x1dc 0x578 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1 0x1dc 0x578 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3 0x1dc 0x578 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D12__EPDC_SDDO_12 0x1e0 0x57c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D12__GPIO3_12 0x1e0 0x57c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12 0x1e0 0x57c 0x81c 0x2 0x1
+#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28 0x1e0 0x57c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2 0x1e0 0x57c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4 0x1e0 0x57c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D13__EPDC_SDDO_13 0x1e4 0x580 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D13__GPIO3_13 0x1e4 0x580 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13 0x1e4 0x580 0x820 0x2 0x1
+#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29 0x1e4 0x580 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3 0x1e4 0x580 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5 0x1e4 0x580 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D14__EPDC_SDDO_14 0x1e8 0x584 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D14__GPIO3_14 0x1e8 0x584 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14 0x1e8 0x584 0x824 0x2 0x1
+#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30 0x1e8 0x584 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD 0x1e8 0x584 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4 0x1e8 0x584 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6 0x1e8 0x584 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D15__EPDC_SDDO_15 0x1ec 0x588 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D15__GPIO3_15 0x1ec 0x588 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15 0x1ec 0x588 0x828 0x2 0x1
+#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31 0x1ec 0x588 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC 0x1ec 0x588 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5 0x1ec 0x588 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7 0x1ec 0x588 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK 0x1f0 0x58c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDCLK__GPIO3_16 0x1f0 0x58c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16 0x1f0 0x58c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16 0x1f0 0x58c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS 0x1f0 0x58c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0 0x1f0 0x58c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK 0x1f0 0x58c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDSP__EPCD_GDSP 0x1f4 0x590 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDSP__GPIO3_17 0x1f4 0x590 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17 0x1f4 0x590 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17 0x1f4 0x590 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD 0x1f4 0x590 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1 0x1f4 0x590 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID 0x1f4 0x590 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDOE__EPCD_GDOE 0x1f8 0x594 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDOE__GPIO3_18 0x1f8 0x594 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18 0x1f8 0x594 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18 0x1f8 0x594 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC 0x1f8 0x594 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2 0x1f8 0x594 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION 0x1f8 0x594 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDRL__EPCD_GDRL 0x1fc 0x598 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDRL__GPIO3_19 0x1fc 0x598 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19 0x1f8 0x598 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19 0x1fc 0x598 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS 0x1fc 0x598 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3 0x1fc 0x598 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG 0x1fc 0x598 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK 0x200 0x59c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLK__GPIO3_20 0x200 0x59c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20 0x200 0x59c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20 0x200 0x59c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD 0x200 0x59c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0 0x200 0x59c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT 0x200 0x59c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ 0x204 0x5a0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOEZ__GPIO3_21 0x204 0x5a0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21 0x204 0x5a0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21 0x204 0x5a0 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC 0x204 0x5a0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1 0x204 0x5a0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY 0x204 0x5a0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOED__EPCD_SDOED 0x208 0x5a4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOED__GPIO3_22 0x208 0x5a4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22 0x208 0x5a4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22 0x208 0x5a4 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS 0x208 0x5a4 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2 0x208 0x5a4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID 0x208 0x5a4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOE__EPCD_SDOE 0x20c 0x5a8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOE__GPIO3_23 0x20c 0x5a8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23 0x20c 0x5a8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23 0x20c 0x5a8 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD 0x20c 0x5a8 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3 0x20c 0x5a8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE 0x20c 0x5a8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDLE__EPCD_SDLE 0x210 0x5ac 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDLE__GPIO3_24 0x210 0x5ac 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24 0x210 0x5ac 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8 0x210 0x5ac 0x71c 0x3 0x1
+#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC 0x210 0x5ac 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4 0x210 0x5ac 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR 0x210 0x5ac 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN 0x214 0x5b0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLKN__GPIO3_25 0x214 0x5b0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25 0x214 0x5b0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9 0x214 0x5b0 0x720 0x3 0x1
+#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS 0x214 0x5b0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR 0x214 0x5b0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK 0x214 0x5b0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR 0x218 0x5b4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDSHR__GPIO3_26 0x218 0x5b4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26 0x218 0x5b4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10 0x218 0x5b4 0x724 0x3 0x1
+#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD 0x218 0x5b4 0x6c8 0x4 0x1
+#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB 0x218 0x5b4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0 0x218 0x5b4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM 0x21c 0x5b8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCOM__GPIO3_27 0x21c 0x5b8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27 0x21c 0x5b8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11 0x21c 0x5b8 0x728 0x3 0x1
+#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC 0x21c 0x5b8 0x6d4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN 0x21c 0x5b8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1 0x21c 0x5b8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT 0x220 0x5bc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28 0x220 0x5bc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28 0x220 0x5bc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12 0x220 0x5bc 0x72c 0x3 0x1
+#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS 0x220 0x5bc 0x6d8 0x4 0x1
+#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE 0x220 0x5bc 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID 0x220 0x5bc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0 0x224 0x5c0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29 0x224 0x5c0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29 0x224 0x5c0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13 0x224 0x5c0 0x730 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD 0x224 0x5c0 0x6c4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE 0x224 0x5c0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID 0x224 0x5c0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1 0x228 0x5c4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30 0x228 0x5c4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30 0x228 0x5c4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14 0x228 0x5c4 0x734 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC 0x228 0x5c4 0x6cc 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD 0x228 0x5c4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST 0x228 0x5c4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2 0x22c 0x5c8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31 0x22c 0x5c8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31 0x22c 0x5c8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15 0x22c 0x5c8 0x738 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS 0x22c 0x5c8 0x6d0 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0 0x22c 0x5c8 0x7b8 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST 0x22c 0x5c8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3 0x230 0x5cc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20 0x230 0x5cc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2 0x230 0x5cc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1 0x230 0x5cc 0x7bc 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK 0x230 0x5cc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0 0x234 0x5d0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM0__GPIO4_21 0x234 0x5d0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3 0x234 0x5d0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK 0x234 0x5d0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1 0x238 0x5d4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM1__GPIO4_22 0x238 0x5d4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3 0x238 0x5d4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0 0x23c 0x5d8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR0__GPIO4_23 0x23c 0x5d8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7 0x23c 0x5d8 0x718 0x3 0x1
+#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1 0x240 0x5dc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR1__GPIO4_24 0x240 0x5dc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6 0x240 0x5dc 0x714 0x3 0x1
+#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0 0x244 0x5e0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE0__GPIO4_25 0x244 0x5e0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5 0x244 0x5e0 0x710 0x3 0x1
+#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1 0x248 0x5e4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE1__GPIO4_26 0x248 0x5e4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4 0x248 0x5e4 0x70c 0x3 0x0
+#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2 0x24c 0x5e8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE2__GPIO4_27 0x24c 0x5e8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3 0x24c 0x5e8 0x708 0x3 0x1
+#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3 0x250 0x5ec 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE3__GPIO4_28 0x250 0x5ec 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2 0x250 0x5ec 0x704 0x3 0x1
+#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4 0x254 0x5f0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE4__GPIO4_29 0x254 0x5f0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1 0x254 0x5f0 0x700 0x3 0x1
+#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5 0x258 0x5f4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE5__GPIO4_30 0x258 0x5f4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0 0x258 0x5f4 0x6fc 0x3 0x1
+#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0 0x25c 0x5f8 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA0__GPIO1_0 0x25c 0x5f8 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA0__KPP_COL_4 0x25c 0x5f8 0x790 0x3 0x2
+#define MX50_PAD_EIM_DA0__TPIU_TRACE_0 0x25c 0x5f8 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0 0x25c 0x5f8 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1 0x260 0x5fc 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA1__GPIO1_1 0x260 0x5fc 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA1__KPP_ROW_4 0x260 0x5fc 0x7a0 0x3 0x2
+#define MX50_PAD_EIM_DA1__TPIU_TRACE_1 0x260 0x5fc 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1 0x260 0x5fc 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2 0x264 0x600 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA2__GPIO1_2 0x264 0x600 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA2__KPP_COL_5 0x264 0x600 0x794 0x3 0x2
+#define MX50_PAD_EIM_DA2__TPIU_TRACE_2 0x264 0x600 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2 0x264 0x600 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3 0x268 0x604 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA3__GPIO1_3 0x268 0x604 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA3__KPP_ROW_5 0x268 0x604 0x7a4 0x3 0x2
+#define MX50_PAD_EIM_DA3__TPIU_TRACE_3 0x268 0x604 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3 0x268 0x604 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4 0x26c 0x608 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA4__GPIO1_4 0x26c 0x608 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA4__KPP_COL_6 0x26c 0x608 0x798 0x3 0x2
+#define MX50_PAD_EIM_DA4__TPIU_TRACE_4 0x26c 0x608 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4 0x26c 0x608 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5 0x270 0x60c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA5__GPIO1_5 0x270 0x60c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA5__KPP_ROW_6 0x270 0x60c 0x7a8 0x3 0x2
+#define MX50_PAD_EIM_DA5__TPIU_TRACE_5 0x270 0x60c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5 0x270 0x60c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6 0x274 0x610 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA6__GPIO1_6 0x274 0x610 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA6__KPP_COL_7 0x274 0x610 0x79c 0x3 0x2
+#define MX50_PAD_EIM_DA6__TPIU_TRACE_6 0x274 0x610 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6 0x274 0x610 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7 0x278 0x614 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA7__GPIO1_7 0x278 0x614 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA7__KPP_ROW_7 0x278 0x614 0x7ac 0x3 0x2
+#define MX50_PAD_EIM_DA7__TPIU_TRACE_7 0x278 0x614 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7 0x278 0x614 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8 0x27c 0x618 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA8__GPIO1_8 0x27c 0x618 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE 0x27c 0x618 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA8__TPIU_TRACE_8 0x27c 0x618 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0 0x27c 0x618 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9 0x280 0x61c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA9__GPIO1_9 0x280 0x61c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE 0x280 0x61c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA9__TPIU_TRACE_9 0x280 0x61c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1 0x280 0x61c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10 0x284 0x620 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA10__GPIO1_10 0x284 0x620 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0 0x284 0x620 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA10__TPIU_TRACE_10 0x284 0x620 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2 0x284 0x620 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11 0x288 0x624 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA11__GPIO1_11 0x288 0x624 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1 0x288 0x624 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA11__TPIU_TRACE_11 0x288 0x624 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3 0x288 0x624 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12 0x28c 0x628 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA12__GPIO1_12 0x28c 0x628 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2 0x28c 0x628 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA12__EPDC_SDCE_6 0x28c 0x628 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA12__TPIU_TRACE_12 0x28c 0x628 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4 0x28c 0x628 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13 0x290 0x62c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA13__GPIO1_13 0x290 0x62c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3 0x290 0x62c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA13__EPDC_SDCE_7 0x290 0x62c 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA13__TPIU_TRACE_13 0x290 0x62c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5 0x290 0x62c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14 0x294 0x630 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA14__GPIO1_14 0x294 0x630 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0 0x294 0x630 0x7b4 0x2 0x2
+#define MX50_PAD_EIM_DA14__EPDC_SDCE_8 0x294 0x630 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA14__TPIU_TRACE_14 0x294 0x630 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6 0x294 0x630 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15 0x298 0x634 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA15__GPIO1_15 0x298 0x634 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS 0x298 0x634 0x7b0 0x2 0x2
+#define MX50_PAD_EIM_DA15__EPDC_SDCE_9 0x298 0x634 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA15__TPIU_TRACE_15 0x298 0x634 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7 0x298 0x634 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2 0x29c 0x638 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS2__GPIO1_16 0x29c 0x638 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27 0x29c 0x638 0x000 0x2 0x0
+#define MX50_PAD_EIM_CS2__TPIU_TRCLK 0x29c 0x638 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0 0x29c 0x638 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1 0x2a0 0x63c 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS1__GPIO1_17 0x2a0 0x63c 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS1__TPIU_TRCTL 0x2a0 0x63c 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1 0x2a0 0x63c 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0 0x2a4 0x640 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS0__GPIO1_18 0x2a4 0x640 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2 0x2a4 0x640 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0 0x2a8 0x644 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB0__GPIO1_19 0x2a8 0x644 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3 0x2a8 0x644 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1 0x2ac 0x648 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB1__GPIO1_20 0x2ac 0x648 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4 0x2ac 0x648 0x000 0x7 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT 0x2b0 0x64c 0x000 0x0 0x0
+#define MX50_PAD_EIM_WAIT__GPIO1_21 0x2b0 0x64c 0x000 0x1 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B 0x2b0 0x64c 0x000 0x2 0x0
+#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5 0x2b0 0x64c 0x000 0x7 0x0
+#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK 0x2b4 0x650 0x000 0x0 0x0
+#define MX50_PAD_EIM_BCLK__GPIO1_22 0x2b4 0x650 0x000 0x1 0x0
+#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6 0x2b4 0x650 0x000 0x7 0x0
+#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY 0x2b8 0x654 0x000 0x0 0x0
+#define MX50_PAD_EIM_RDY__GPIO1_23 0x2b8 0x654 0x000 0x1 0x0
+#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7 0x2b8 0x654 0x000 0x7 0x0
+#define MX50_PAD_EIM_OE__EIM_WEIM_OE 0x2bc 0x658 0x000 0x0 0x0
+#define MX50_PAD_EIM_OE__GPIO1_24 0x2bc 0x658 0x000 0x1 0x0
+#define MX50_PAD_EIM_OE__INT_BOOT 0x2bc 0x658 0x000 0x7 0x0
+#define MX50_PAD_EIM_RW__EIM_WEIM_RW 0x2c0 0x65c 0x000 0x0 0x0
+#define MX50_PAD_EIM_RW__GPIO1_25 0x2c0 0x65c 0x000 0x1 0x0
+#define MX50_PAD_EIM_RW__SYSTEM_RST 0x2c0 0x65c 0x000 0x7 0x0
+#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA 0x2c4 0x660 0x000 0x0 0x0
+#define MX50_PAD_EIM_LBA__GPIO1_26 0x2c4 0x660 0x000 0x1 0x0
+#define MX50_PAD_EIM_LBA__TESTER_ACK 0x2c4 0x660 0x000 0x7 0x0
+#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE 0x2c8 0x664 0x000 0x0 0x0
+#define MX50_PAD_EIM_CRE__GPIO1_27 0x2c8 0x664 0x000 0x1 0x0
+
+#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
new file mode 100644
index 0000000..0c75fe3
--- /dev/null
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -0,0 +1,478 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx50-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0x0>;
+ };
+ };
+
+ tzic: tz-interrupt-controller@0fffc000 {
+ compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x0fffc000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc1: esdhc@50004000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@50008000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi1: ecspi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ssi2: ssi@50014000 {
+ compatible = "fsl,imx50-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <30>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ esdhc3: esdhc@50020000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc4: esdhc@50024000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+ };
+
+ usbotg: usb@53f80000 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80000 0x0200>;
+ interrupts = <18>;
+ clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+ status = "disabled";
+ };
+
+ usbh1: usb@53f80200 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80200 0x0200>;
+ interrupts = <14>;
+ clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+ status = "disabled";
+ };
+
+ usbh2: usb@53f80400 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80400 0x0200>;
+ interrupts = <16>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ status = "disabled";
+ };
+
+ usbh3: usb@53f80600 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80600 0x0200>;
+ interrupts = <17>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@53f84000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53f88000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@53f8c000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@53f90000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wdog1: wdog@53f98000 {
+ compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ };
+
+ gpt: timer@53fa0000 {
+ compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
+ reg = <0x53fa0000 0x4000>;
+ interrupts = <39>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
+ clock-names = "ipg", "per";
+ };
+
+ iomuxc: iomuxc@53fa8000 {
+ compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@53fa8000 {
+ compatible = "fsl,imx50-iomuxc-gpr", "syscon";
+ reg = <0x53fa8000 0xc>;
+ };
+
+ pwm1: pwm@53fb4000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb4000 0x4000>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
+ clock-names = "ipg", "per";
+ interrupts = <61>;
+ };
+
+ pwm2: pwm@53fb8000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb8000 0x4000>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
+ clock-names = "ipg", "per";
+ interrupts = <94>;
+ };
+
+ uart1: serial@53fbc000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@53fc0000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ src: src@53fd0000 {
+ compatible = "fsl,imx50-src", "fsl,imx51-src";
+ reg = <0x53fd0000 0x4000>;
+ #reset-cells = <1>;
+ };
+
+ clks: ccm@53fd4000{
+ compatible = "fsl,imx50-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
+
+ gpio5: gpio@53fdc000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53fdc000 0x4000>;
+ interrupts = <103 104>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@53fe0000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53fe0000 0x4000>;
+ interrupts = <105 106>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c3: i2c@53fec000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+ reg = <0x53fec000 0x4000>;
+ interrupts = <64>;
+ clocks = <&clks IMX5_CLK_I2C3_GATE>;
+ status = "disabled";
+ };
+
+ uart4: serial@53ff0000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+ <&clks IMX5_CLK_UART4_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ uart5: serial@63f90000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+ <&clks IMX5_CLK_UART5_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ owire: owire@63fa4000 {
+ compatible = "fsl,imx50-owire", "fsl,imx21-owire";
+ reg = <0x63fa4000 0x4000>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@63fac000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ sdma: sdma@63fb0000 {
+ compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
+ reg = <0x63fb0000 0x4000>;
+ interrupts = <6>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
+ clock-names = "ipg", "ahb";
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
+ };
+
+ cspi: cspi@63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c2: i2c@63fc4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+ reg = <0x63fc4000 0x4000>;
+ interrupts = <63>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@63fc8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+ reg = <0x63fc8000 0x4000>;
+ interrupts = <62>;
+ clocks = <&clks IMX5_CLK_I2C1_GATE>;
+ status = "disabled";
+ };
+
+ ssi1: ssi@63fcc000 {
+ compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x63fcc000 0x4000>;
+ interrupts = <29>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ audmux: audmux@63fd0000 {
+ compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
+ reg = <0x63fd0000 0x4000>;
+ status = "disabled";
+ };
+
+ fec: ethernet@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
index b360699..e88b2a6 100644
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -34,13 +34,47 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_2>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii";
- phy-reset-gpios = <&gpio3 0 0>;
+ phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
phy-reset-duration = <1>;
status = "okay";
};
+&iomuxc {
+ imx51-apf51 {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
+ MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
+ MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
+ MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
+ MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
+ MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
+ MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
+ MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
+ MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
+ MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
+ MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
+ MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
+ MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
+ MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
+ >;
+ };
+ };
+};
+
&nfc {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
@@ -50,6 +84,6 @@
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_2>;
+ pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 5a7f552..c29cfa9 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -21,7 +21,7 @@
crtcs = <&ipu 0>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+ pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
lw700 {
@@ -48,7 +48,7 @@
user-key {
label = "user";
- gpios = <&gpio1 3 0>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
linux,code = <256>; /* BTN_0 */
};
};
@@ -58,7 +58,7 @@
user {
label = "Heartbeat";
- gpios = <&gpio1 2 0>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@@ -66,31 +66,33 @@
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+ <&gpio4 25 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&ecspi2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi2_1>;
+ pinctrl-0 = <&pinctrl_ecspi2>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 28 1>, <&gpio3 27 1>;
+ cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
+ <&gpio3 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- cd-gpios = <&gpio2 29 0>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
+ pinctrl-0 = <&pinctrl_esdhc2>;
bus-width = <4>;
non-removable;
status = "okay";
@@ -98,7 +100,7 @@
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_2>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
@@ -106,7 +108,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx51-apf51dev {
pinctrl_hog: hoggrp {
fsl,pins = <
MX51_PAD_EIM_EB2__GPIO2_22 0x0C5
@@ -120,5 +122,81 @@
MX51_PAD_GPIO1_3__GPIO1_3 0x0C5
>;
};
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
+ MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
+ MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
+ MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
+ MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
+ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
+ MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
+ MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
+ MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_ipu_disp1: ipudisp1grp {
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
+ >;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index be1407c..121dadd 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -26,7 +26,7 @@
crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+ pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
native-mode = <&timing0>;
timing0: dvi {
@@ -48,7 +48,7 @@
crtcs = <&ipu 1>;
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+ pinctrl-0 = <&pinctrl_ipu_disp2>;
status = "disabled";
display-timings {
native-mode = <&timing1>;
@@ -75,12 +75,23 @@
power {
label = "Power Button";
- gpios = <&gpio2 21 0>;
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
};
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-diagnostic {
+ label = "diagnostic";
+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
sound {
compatible = "fsl,imx51-babbage-sgtl5000",
"fsl,imx-audio-sgtl5000";
@@ -105,14 +116,14 @@
reg=<0>;
#clock-cells = <0>;
clock-frequency = <26000000>;
- gpios = <&gpio4 26 1>;
+ gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
};
};
};
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
fsl,cd-controller;
fsl,wp-controller;
status = "okay";
@@ -120,24 +131,25 @@
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
- cd-gpios = <&gpio1 6 0>;
- wp-gpios = <&gpio1 5 0>;
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+ <&gpio4 25 GPIO_ACTIVE_LOW>;
status = "okay";
pmic: mc13892@0 {
@@ -148,7 +160,7 @@
spi-cs-high;
reg = <0>;
interrupt-parent = <&gpio1>;
- interrupts = <8 0x4>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
regulators {
sw1_reg: sw1 {
@@ -267,7 +279,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx51-babbage {
pinctrl_hog: hoggrp {
fsl,pins = <
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
@@ -280,25 +292,194 @@
MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
+ MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
+ MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
+ MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
+ MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
+ MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
+ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
+ MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
+ MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000
+ MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000
+ MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000
+ MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000
+ MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000
+ MX51_PAD_EIM_CS5__FEC_CRS 0x80000000
+ MX51_PAD_NANDF_RB2__FEC_COL 0x80000000
+ MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000
+ MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000
+ MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000
+ MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000
+ MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000
+ MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000
+ MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000
+ MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000
+ MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000
+ MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
+ MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_D22__GPIO2_6 0x80000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+ MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_ipu_disp1: ipudisp1grp {
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
+ >;
+ };
+
+ pinctrl_ipu_disp2: ipudisp2grp {
+ fsl,pins = <
+ MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5
+ MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5
+ MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5
+ MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5
+ MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5
+ MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5
+ MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5
+ MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5
+ MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5
+ MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5
+ MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5
+ MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5
+ MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5
+ MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5
+ MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5
+ MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5
+ MX51_PAD_DI2_PIN2__DI2_PIN2 0x5
+ MX51_PAD_DI2_PIN3__DI2_PIN3 0x5
+ MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
+ MX51_PAD_DI_GP4__DI2_PIN15 0x5
+ >;
+ };
+
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
+ MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
+ MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
+ MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
+ MX51_PAD_KEY_COL0__KEY_COL0 0xe8
+ MX51_PAD_KEY_COL1__KEY_COL1 0xe8
+ MX51_PAD_KEY_COL2__KEY_COL2 0xe8
+ MX51_PAD_KEY_COL3__KEY_COL3 0xe8
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
+ MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
+ MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_EIM_D25__UART3_RXD 0x1c5
+ MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+ MX51_PAD_EIM_D27__UART3_RTS 0x1c5
+ MX51_PAD_EIM_D24__UART3_CTS 0x1c5
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
sgtl5000: codec@0a {
@@ -312,35 +493,39 @@
&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
+ pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
status = "okay";
};
&kpp {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_kpp_1>;
- linux,keymap = <0x00000067 /* KEY_UP */
- 0x0001006c /* KEY_DOWN */
- 0x00020072 /* KEY_VOLUMEDOWN */
- 0x00030066 /* KEY_HOME */
- 0x0100006a /* KEY_RIGHT */
- 0x01010069 /* KEY_LEFT */
- 0x0102001c /* KEY_ENTER */
- 0x01030073 /* KEY_VOLUMEUP */
- 0x02000040 /* KEY_F6 */
- 0x02010042 /* KEY_F8 */
- 0x02020043 /* KEY_F9 */
- 0x02030044 /* KEY_F10 */
- 0x0300003b /* KEY_F1 */
- 0x0301003c /* KEY_F2 */
- 0x0302003d /* KEY_F3 */
- 0x03030074>; /* KEY_POWER */
+ pinctrl-0 = <&pinctrl_kpp>;
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_UP)
+ MATRIX_KEY(0, 1, KEY_DOWN)
+ MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0, 3, KEY_HOME)
+ MATRIX_KEY(1, 0, KEY_RIGHT)
+ MATRIX_KEY(1, 1, KEY_LEFT)
+ MATRIX_KEY(1, 2, KEY_ENTER)
+ MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+ MATRIX_KEY(2, 0, KEY_F6)
+ MATRIX_KEY(2, 1, KEY_F8)
+ MATRIX_KEY(2, 2, KEY_F9)
+ MATRIX_KEY(2, 3, KEY_F10)
+ MATRIX_KEY(3, 0, KEY_F1)
+ MATRIX_KEY(3, 1, KEY_F2)
+ MATRIX_KEY(3, 2, KEY_F3)
+ MATRIX_KEY(3, 3, KEY_POWER)
+ >;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
new file mode 100644
index 0000000..9b3acf6
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx51.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX51";
+ compatible = "eukrea,cpuimx51", "fsl,imx51";
+
+ memory {
+ reg = <0x90000000 0x10000000>; /* 256M */
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ imx51-eukrea {
+ pinctrl_tsc2007_1: tsc2007grp-1 {
+ fsl,pins = <
+ MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
+ MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
+ MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
+ MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
+ MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
+ MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
+ MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
+ MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
+ MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
+ MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
+ MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
+ MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
+ MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
+ MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX51_PAD_SD2_CMD__I2C1_SCL 0x400001ed
+ MX51_PAD_SD2_CLK__I2C1_SDA 0x400001ed
+ >;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
new file mode 100644
index 0000000..5cec4f3
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/dts-v1/;
+#include "imx51-eukrea-cpuimx51.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Eukrea CPUIMX51";
+ compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+ button-1 {
+ label = "BP1";
+ gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ linux,code = <256>;
+ gpio-key,wakeup;
+ linux,input-type = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sound {
+ compatible = "eukrea,asoc-tlv320";
+ eukrea,model = "imx51-eukrea-tlv320aic23";
+ ssi-controller = <&ssi2>;
+ fsl,mux-int-port = <2>;
+ fsl,mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+ fsl,cd-controller;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ imx51-eukrea {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
+ MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
+ MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
+ MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
+ MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3_rtscts: uart3rtsctsgrp {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__UART3_RTS 0x1c5
+ MX51_PAD_KEY_COL5__UART3_CTS 0x1c5
+ >;
+ };
+
+ pinctrl_backlight_1: backlightgrp-1 {
+ fsl,pins = <
+ MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
+ >;
+ };
+
+ pinctrl_esdhc1_cd: esdhc1_cd {
+ fsl,pins = <
+ MX51_PAD_GPIO1_0__SD1_CD 0x20d5
+ >;
+ };
+
+ pinctrl_gpiokeys_1: gpiokeysgrp-1 {
+ fsl,pins = <
+ MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
+ >;
+ };
+
+ pinctrl_gpioled: gpioledgrp-1 {
+ fsl,pins = <
+ MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
+ >;
+ };
+
+ pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+ fsl,pins = <
+ MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
+ >;
+ };
+ };
+};
+
+&ssi2 {
+ codec-handle = <&tlv320aic23>;
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 4bcdd3a..e4b07d1 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -12,6 +12,10 @@
#include "skeleton.dtsi"
#include "imx51-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
@@ -21,6 +25,10 @@
gpio3 = &gpio4;
i2c0 = &i2c1;
i2c1 = &i2c2;
+ mmc0 = &esdhc1;
+ mmc1 = &esdhc2;
+ mmc2 = &esdhc3;
+ mmc3 = &esdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -64,18 +72,32 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0>;
- clock-latency = <61036>; /* two CLK32 periods */
- clocks = <&clks 24>;
+ clock-latency = <62500>;
+ clocks = <&clks IMX5_CLK_CPU_PODF>;
clock-names = "cpu";
operating-points = <
- /* kHz uV (No regulator support) */
- 160000 0
- 800000 0
+ 166000 1000000
+ 600000 1050000
+ 800000 1100000
>;
+ voltage-tolerance = <5>;
+ };
+ };
+
+ usbphy {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-bus";
+
+ usbphy0: usbphy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+ clock-names = "main_clk";
};
};
@@ -96,7 +118,9 @@
compatible = "fsl,imx51-ipu";
reg = <0x40000000 0x20000000>;
interrupts = <11 10>;
- clocks = <&clks 59>, <&clks 110>, <&clks 61>;
+ clocks = <&clks IMX5_CLK_IPU_GATE>,
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
};
@@ -119,7 +143,9 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
- clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -128,7 +154,9 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
- clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -138,7 +166,8 @@
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
- clocks = <&clks 32>, <&clks 33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -149,7 +178,8 @@
compatible = "fsl,imx51-ecspi";
reg = <0x70010000 0x4000>;
interrupts = <36>;
- clocks = <&clks 51>, <&clks 52>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -158,7 +188,7 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x70014000 0x4000>;
interrupts = <30>;
- clocks = <&clks 49>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
@@ -171,7 +201,9 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
interrupts = <3>;
- clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -181,25 +213,20 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70024000 0x4000>;
interrupts = <4>;
- clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
};
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks 75>;
- clock-names = "main_clk";
- status = "okay";
- };
-
usbotg: usb@73f80000 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80000 0x0200>;
interrupts = <18>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
@@ -209,7 +236,7 @@
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80200 0x0200>;
interrupts = <14>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
@@ -218,7 +245,7 @@
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80400 0x0200>;
interrupts = <16>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
@@ -227,7 +254,7 @@
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80600 0x0200>;
interrupts = <17>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
@@ -236,7 +263,7 @@
#index-cells = <1>;
compatible = "fsl,imx51-usbmisc";
reg = <0x73f80800 0x200>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
};
gpio1: gpio@73f84000 {
@@ -283,7 +310,7 @@
compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
reg = <0x73f94000 0x4000>;
interrupts = <60>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
@@ -291,14 +318,14 @@
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
};
wdog2: wdog@73f9c000 {
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f9c000 0x4000>;
interrupts = <59>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
@@ -306,7 +333,8 @@
compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
reg = <0x73fa0000 0x4000>;
interrupts = <39>;
- clocks = <&clks 36>, <&clks 41>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
@@ -319,7 +347,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb4000 0x4000>;
- clocks = <&clks 37>, <&clks 38>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -328,7 +357,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb8000 0x4000>;
- clocks = <&clks 39>, <&clks 40>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -337,7 +367,8 @@
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
- clocks = <&clks 28>, <&clks 29>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -346,7 +377,8 @@
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
- clocks = <&clks 30>, <&clks 31>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -376,14 +408,14 @@
compatible = "fsl,imx51-iim", "fsl,imx27-iim";
reg = <0x83f98000 0x4000>;
interrupts = <69>;
- clocks = <&clks 107>;
+ clocks = <&clks IMX5_CLK_IIM_GATE>;
};
owire: owire@83fa4000 {
compatible = "fsl,imx51-owire", "fsl,imx21-owire";
reg = <0x83fa4000 0x4000>;
interrupts = <88>;
- clocks = <&clks 159>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
status = "disabled";
};
@@ -393,7 +425,8 @@
compatible = "fsl,imx51-ecspi";
reg = <0x83fac000 0x4000>;
interrupts = <37>;
- clocks = <&clks 53>, <&clks 54>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -402,7 +435,8 @@
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
- clocks = <&clks 56>, <&clks 56>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
@@ -414,7 +448,8 @@
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 55>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -425,7 +460,7 @@
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
- clocks = <&clks 35>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
status = "disabled";
};
@@ -435,7 +470,7 @@
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc8000 0x4000>;
interrupts = <62>;
- clocks = <&clks 34>;
+ clocks = <&clks IMX5_CLK_I2C1_GATE>;
status = "disabled";
};
@@ -443,7 +478,7 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
- clocks = <&clks 48>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
@@ -455,6 +490,8 @@
audmux: audmux@83fd0000 {
compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
reg = <0x83fd0000 0x4000>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ clock-names = "audmux";
status = "disabled";
};
@@ -463,7 +500,7 @@
#size-cells = <1>;
compatible = "fsl,imx51-weim";
reg = <0x83fda000 0x1000>;
- clocks = <&clks 57>;
+ clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
ranges = <
0 0 0xb0000000 0x08000000
1 0 0xb8000000 0x08000000
@@ -479,7 +516,7 @@
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
interrupts = <8>;
- clocks = <&clks 60>;
+ clocks = <&clks IMX5_CLK_NFC_GATE>;
status = "disabled";
};
@@ -487,7 +524,7 @@
compatible = "fsl,imx51-pata", "fsl,imx27-pata";
reg = <0x83fe0000 0x4000>;
interrupts = <70>;
- clocks = <&clks 172>;
+ clocks = <&clks IMX5_CLK_PATA_GATE>;
status = "disabled";
};
@@ -495,7 +532,7 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
- clocks = <&clks 50>;
+ clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";
@@ -508,336 +545,12 @@
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
- clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
};
};
-
-&iomuxc {
- audmux {
- pinctrl_audmux_1: audmuxgrp-1 {
- fsl,pins = <
- MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
- MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
- MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
- MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
- >;
- };
- };
-
- fec {
- pinctrl_fec_1: fecgrp-1 {
- fsl,pins = <
- MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000
- MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000
- MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000
- MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000
- MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000
- MX51_PAD_EIM_CS5__FEC_CRS 0x80000000
- MX51_PAD_NANDF_RB2__FEC_COL 0x80000000
- MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000
- MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000
- MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000
- MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000
- MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000
- MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000
- MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000
- MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000
- MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000
- MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
- >;
- };
-
- pinctrl_fec_2: fecgrp-2 {
- fsl,pins = <
- MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
- MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
- MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
- MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
- MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
- MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
- MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
- MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
- MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
- MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
- MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
- MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
- MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
- MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
- MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
- MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
- MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
- MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
- >;
- };
- };
-
- ecspi2 {
- pinctrl_ecspi2_1: ecspi2grp-1 {
- fsl,pins = <
- MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
- MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
- MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
- >;
- };
- };
-
- esdhc1 {
- pinctrl_esdhc1_1: esdhc1grp-1 {
- fsl,pins = <
- MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
- MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
- MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
- MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
- MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
- MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
- >;
- };
- };
-
- esdhc2 {
- pinctrl_esdhc2_1: esdhc2grp-1 {
- fsl,pins = <
- MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
- MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
- MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
- MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
- MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
- MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
- >;
- };
- };
-
- i2c2 {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
- MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
- >;
- };
-
- pinctrl_i2c2_2: i2c2grp-2 {
- fsl,pins = <
- MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
- MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
- >;
- };
-
- pinctrl_i2c2_3: i2c2grp-3 {
- fsl,pins = <
- MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed
- MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed
- >;
- };
- };
-
- ipu_disp1 {
- pinctrl_ipu_disp1_1: ipudisp1grp-1 {
- fsl,pins = <
- MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
- MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
- MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
- MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
- MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
- MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
- MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
- MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
- MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
- MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
- MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
- MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
- MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
- MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
- MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
- MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
- MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
- MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
- MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
- MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
- MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
- MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
- MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
- MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
- MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 /* hsync */
- MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 /* vsync */
- >;
- };
- };
-
- ipu_disp2 {
- pinctrl_ipu_disp2_1: ipudisp2grp-1 {
- fsl,pins = <
- MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5
- MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5
- MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5
- MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5
- MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5
- MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5
- MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5
- MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5
- MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5
- MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5
- MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5
- MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5
- MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5
- MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5
- MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5
- MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5
- MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 /* hsync */
- MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 /* vsync */
- MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 /* CLK */
- MX51_PAD_DI_GP4__DI2_PIN15 0x5 /* DE */
- >;
- };
- };
-
- kpp {
- pinctrl_kpp_1: kppgrp-1 {
- fsl,pins = <
- MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
- MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
- MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
- MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
- MX51_PAD_KEY_COL0__KEY_COL0 0xe8
- MX51_PAD_KEY_COL1__KEY_COL1 0xe8
- MX51_PAD_KEY_COL2__KEY_COL2 0xe8
- MX51_PAD_KEY_COL3__KEY_COL3 0xe8
- >;
- };
- };
-
- pata {
- pinctrl_pata_1: patagrp-1 {
- fsl,pins = <
- MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004
- MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004
- MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004
- MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004
- MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004
- MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004
- MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004
- MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004
- MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004
- MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004
- MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004
- MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004
- MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004
- MX51_PAD_NANDF_D15__PATA_DATA15 0x2004
- MX51_PAD_NANDF_D14__PATA_DATA14 0x2004
- MX51_PAD_NANDF_D13__PATA_DATA13 0x2004
- MX51_PAD_NANDF_D12__PATA_DATA12 0x2004
- MX51_PAD_NANDF_D11__PATA_DATA11 0x2004
- MX51_PAD_NANDF_D10__PATA_DATA10 0x2004
- MX51_PAD_NANDF_D9__PATA_DATA9 0x2004
- MX51_PAD_NANDF_D8__PATA_DATA8 0x2004
- MX51_PAD_NANDF_D7__PATA_DATA7 0x2004
- MX51_PAD_NANDF_D6__PATA_DATA6 0x2004
- MX51_PAD_NANDF_D5__PATA_DATA5 0x2004
- MX51_PAD_NANDF_D4__PATA_DATA4 0x2004
- MX51_PAD_NANDF_D3__PATA_DATA3 0x2004
- MX51_PAD_NANDF_D2__PATA_DATA2 0x2004
- MX51_PAD_NANDF_D1__PATA_DATA1 0x2004
- MX51_PAD_NANDF_D0__PATA_DATA0 0x2004
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
- MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
- >;
- };
-
- pinctrl_uart1_rtscts_1: uart1rtscts-1 {
- fsl,pins = <
- MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
- MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
- >;
- };
- };
-
- uart2 {
- pinctrl_uart2_1: uart2grp-1 {
- fsl,pins = <
- MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
- MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
- >;
- };
- };
-
- uart3 {
- pinctrl_uart3_1: uart3grp-1 {
- fsl,pins = <
- MX51_PAD_EIM_D25__UART3_RXD 0x1c5
- MX51_PAD_EIM_D26__UART3_TXD 0x1c5
- >;
- };
-
- pinctrl_uart3_rtscts_1: uart3rtscts-1 {
- fsl,pins = <
- MX51_PAD_EIM_D27__UART3_RTS 0x1c5
- MX51_PAD_EIM_D24__UART3_CTS 0x1c5
- >;
- };
-
- pinctrl_uart3_2: uart3grp-2 {
- fsl,pins = <
- MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
- MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
- >;
- };
- };
-
- usbh1 {
- pinctrl_usbh1_1: usbh1grp-1 {
- fsl,pins = <
- MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
- MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
- MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
- MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
- MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
- MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
- MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
- MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
- MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5
- MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5
- MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5
- MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
- >;
- };
- };
-
- usbh2 {
- pinctrl_usbh2_1: usbh2grp-1 {
- fsl,pins = <
- MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5
- MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5
- MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5
- MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5
- MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5
- MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5
- MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5
- MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5
- MX51_PAD_EIM_A24__USBH2_CLK 0x1e5
- MX51_PAD_EIM_A25__USBH2_DIR 0x1e5
- MX51_PAD_EIM_A27__USBH2_NXT 0x1e5
- MX51_PAD_EIM_A26__USBH2_STP 0x1e5
- >;
- };
- };
-};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 174f869..e9337ad 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -49,9 +49,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -99,7 +102,7 @@
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_2>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
@@ -109,7 +112,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx53-ard {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_GPIO_1__GPIO1_1 0x80000000
@@ -148,11 +151,33 @@
MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x80000000
>;
};
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
deleted file mode 100644
index 801fda7..0000000
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53.dtsi"
-
-/ {
- model = "Freescale i.MX53 Evaluation Kit";
- compatible = "fsl,imx53-evk", "fsl,imx53";
-
- memory {
- reg = <0x70000000 0x80000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- green {
- label = "Heartbeat";
- gpios = <&gpio7 7 0>;
- linux,default-trigger = "heartbeat";
- };
- };
-};
-
-&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- cd-gpios = <&gpio3 13 0>;
- wp-gpios = <&gpio3 14 0>;
- status = "okay";
-};
-
-&ecspi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
- status = "okay";
-
- flash: at45db321d@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
- spi-max-frequency = <25000000>;
- reg = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0x3c0000>;
- };
- };
-};
-
-&esdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX53_PAD_EIM_EB2__GPIO2_30 0x80000000
- MX53_PAD_EIM_D19__GPIO3_19 0x80000000
- MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
- MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
- MX53_PAD_EIM_DA13__GPIO3_13 0x80000000
- MX53_PAD_EIM_DA14__GPIO3_14 0x80000000
- MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
- >;
- };
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- pmic: mc13892@08 {
- compatible = "fsl,mc13892", "fsl,mc13xxx";
- reg = <0x08>;
- };
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index 7d304d0..e8d11e2 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -26,7 +26,7 @@
crtcs = <&ipu 1>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+ pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
800x480p60 {
@@ -51,6 +51,7 @@
pwms = <&pwm1 0 3000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
+ power-supply = <®_backlight>;
};
leds {
@@ -73,14 +74,36 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p2v: 3p2v {
+ reg_3p2v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
+
+
+ reg_backlight: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "lcd-supply";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+
+ reg_usbh1_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 2 0>;
+ };
};
sound {
@@ -102,25 +125,25 @@
&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_2>;
+ pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_3>;
+ pinctrl-0 = <&pinctrl_can1>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2_1>;
+ pinctrl-0 = <&pinctrl_can2>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
@@ -128,14 +151,14 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_2>;
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
sgtl5000: codec@0a {
@@ -143,13 +166,13 @@
reg = <0x0a>;
VDDA-supply = <®_3p2v>;
VDDIO-supply = <®_3p2v>;
- clocks = <&clks 150>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
};
};
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_2>;
+ pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <400000>;
status = "okay";
@@ -193,7 +216,7 @@
&i2c3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_1>;
+ pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
@@ -201,14 +224,14 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx53-m53evk {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
-
+ MX53_PAD_GPIO_2__GPIO1_2 0x80000000
+ MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000
>;
};
@@ -218,12 +241,168 @@
MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000
+ MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000
+ MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000
+ MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
+ MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
+ MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
+ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
+ MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_ipu_disp1: ipudisp1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5
+ MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5
+ MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5
+ MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5
+ MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5
+ MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5
+ >;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
+ MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
+ MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
+ MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
+ MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
+ MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
+ MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
+ MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
+ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
+ >;
+ };
};
};
&nfc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand_1>;
+ pinctrl-0 = <&pinctrl_nand>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
status = "okay";
@@ -231,7 +410,11 @@
&pwm1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1_1>;
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&sata {
status = "okay";
};
@@ -242,18 +425,29 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usbh1_vbus>;
+ phy_type = "utmi";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index a630902..55af110 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -17,14 +17,6 @@
model = "TQ MBa53 starter kit";
compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
- reg_backlight: fixed@0 {
- compatible = "regulator-fixed";
- regulator-name = "lcd-supply";
- gpio = <&gpio2 5 0>;
- startup-delay-us = <5000>;
- enable-active-low;
- };
-
backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 50000>;
@@ -43,12 +35,27 @@
status = "disabled";
};
- reg_3p2v: 3p2v {
- compatible = "regulator-fixed";
- regulator-name = "3P2V";
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3200000>;
- regulator-always-on;
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_backlight: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "lcd-supply";
+ gpio = <&gpio2 5 0>;
+ startup-delay-us = <5000>;
+ };
+
+ reg_3p2v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
};
sound {
@@ -148,14 +155,14 @@
&audmux {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
+ pinctrl-0 = <&pinctrl_audmux>;
};
&i2c2 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 150>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
VDDA-supply = <®_3p2v>;
VDDIO-supply = <®_3p2v>;
};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
new file mode 100644
index 0000000..2dca98b
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -0,0 +1,336 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ crtcs = <&ipu 0>;
+ interface-pix-fmt = "rgb565";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp0>;
+ status = "disabled";
+ display-timings {
+ claawvga {
+ native-mode;
+ clock-frequency = <27000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <40>;
+ hfront-porch = <60>;
+ vback-porch = <10>;
+ vfront-porch = <10>;
+ hsync-len = <20>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio1 8 0>;
+ linux,code = <116>; /* KEY_POWER */
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio2 14 0>;
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ gpio-key,wakeup;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio2 15 0>;
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio7_7>;
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio7 7 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p2v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+
+ reg_usb_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 8 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx53-qsb-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-qsb-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3>;
+ cd-gpios = <&gpio3 11 0>;
+ wp-gpios = <&gpio3 12 0>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-qsb {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+ MX53_PAD_GPIO_8__GPIO1_8 0x80000000
+ MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
+ MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
+ MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
+ MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
+ MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
+ MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
+ MX53_PAD_GPIO_16__GPIO7_11 0x80000000
+ >;
+ };
+
+ led_pin_gpio7_7: led_gpio7_7@0 {
+ fsl,pins = <
+ MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_ipu_disp0: ipudisp0grp {
+ fsl,pins = <
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p2v>;
+ VDDIO-supply = <®_3p2v>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 0>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&vpu {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_vbus>;
+ phy_type = "utmi";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 91a5935..dec4b07 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -11,193 +11,14 @@
*/
/dts-v1/;
-#include "imx53.dtsi"
+#include "imx53-qsb-common.dtsi"
/ {
model = "Freescale i.MX53 Quick Start Board";
compatible = "fsl,imx53-qsb", "fsl,imx53";
-
- memory {
- reg = <0x70000000 0x40000000>;
- };
-
- display@di0 {
- compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
- interface-pix-fmt = "rgb565";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp0_1>;
- status = "disabled";
- display-timings {
- claawvga {
- native-mode;
- clock-frequency = <27000000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <40>;
- hfront-porch = <60>;
- vback-porch = <10>;
- vfront-porch = <10>;
- hsync-len = <20>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power Button";
- gpios = <&gpio1 8 0>;
- linux,code = <116>; /* KEY_POWER */
- };
-
- volume-up {
- label = "Volume Up";
- gpios = <&gpio2 14 0>;
- linux,code = <115>; /* KEY_VOLUMEUP */
- gpio-key,wakeup;
- };
-
- volume-down {
- label = "Volume Down";
- gpios = <&gpio2 15 0>;
- linux,code = <114>; /* KEY_VOLUMEDOWN */
- gpio-key,wakeup;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pin_gpio7_7>;
-
- user {
- label = "Heartbeat";
- gpios = <&gpio7 7 0>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_3p2v: 3p2v {
- compatible = "regulator-fixed";
- regulator-name = "3P2V";
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3200000>;
- regulator-always-on;
- };
-
- reg_usb_vbus: usb_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 8 0>;
- enable-active-high;
- };
- };
-
- sound {
- compatible = "fsl,imx53-qsb-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx53-qsb-sgtl5000";
- ssi-controller = <&ssi2>;
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <2>;
- mux-ext-port = <5>;
- };
-};
-
-&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- status = "okay";
-};
-
-&ssi2 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&esdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
- bus-width = <8>;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
- MX53_PAD_GPIO_8__GPIO1_8 0x80000000
- MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
- MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
- MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
- MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
- MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
- MX53_PAD_GPIO_16__GPIO7_11 0x80000000
- >;
- };
-
- led_pin_gpio7_7: led_gpio7_7@0 {
- fsl,pins = <
- MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
- >;
- };
- };
-
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- VDDA-supply = <®_3p2v>;
- VDDIO-supply = <®_3p2v>;
- clocks = <&clks 150>;
- };
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- accelerometer: mma8450@1c {
- compatible = "fsl,mma8450";
- reg = <0x1c>;
- };
-
pmic: dialog@48 {
compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
@@ -292,32 +113,3 @@
};
};
};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
-};
-
-&vpu {
- status = "okay";
-};
-
-&usbh1 {
- vbus-supply = <®_usb_vbus>;
- phy_type = "utmi";
- status = "okay";
-};
-
-&usbotg {
- dr_mode = "peripheral";
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
new file mode 100644
index 0000000..f1bbf9a
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx53-qsb-common.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Quick Start-R Board";
+ compatible = "fsl,imx53-qsrb", "fsl,imx53";
+};
+
+&iomuxc {
+ i2c1 {
+ /* open drain */
+ pinctrl_i2c1_qsrb: i2c1grp-1 {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
+ >;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_qsrb>;
+ status = "okay";
+
+ pmic: mc34708@8 {
+ compatible = "fsl,mc34708";
+ reg = <0x08>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <23 0x8>;
+ regulators {
+ sw1_reg: sw1a {
+ regulator-name = "SW1";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1437500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw1b_reg: sw1b {
+ regulator-name = "SW1B";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1437500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-name = "SW2";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1437500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-name = "SW3";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1425000>;
+ regulator-boot-on;
+ };
+
+ sw4a_reg: sw4a {
+ regulator-name = "SW4A";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4b_reg: sw4b {
+ regulator-name = "SW4B";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw5_reg: sw5 {
+ regulator-name = "SW5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-name = "SWBST";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: vpll {
+ regulator-name = "VPLL";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ vrefddr_reg: vrefddr {
+ regulator-name = "VREFDDR";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vusb_reg: vusb {
+ regulator-name = "VUSB";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vusb2_reg: vusb2 {
+ regulator-name = "VUSB2";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdac_reg: vdac {
+ regulator-name = "VDAC";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-name = "VGEN1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-name = "VGEN2";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index a9b6e10..5ec1590 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -40,7 +40,7 @@
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
@@ -48,21 +48,21 @@
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
+ pinctrl-0 = <&pinctrl_esdhc2>;
non-removable;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
@@ -95,7 +95,7 @@
&esdhc3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
+ pinctrl-0 = <&pinctrl_esdhc3>;
non-removable;
status = "okay";
};
@@ -104,7 +104,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx53-smd {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
@@ -116,24 +116,121 @@
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
>;
};
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
codec: sgtl5000@0a {
@@ -154,7 +251,7 @@
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
accelerometer: mma8450@1c {
@@ -175,7 +272,7 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index abd72af..4f1f0e2 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -22,9 +22,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -35,8 +38,8 @@
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>,
- <&pinctrl_tqma53_esdhc2_2>;
+ pinctrl-0 = <&pinctrl_esdhc2>,
+ <&pinctrl_esdhc2_cdwp>;
vmmc-supply = <®_3p3v>;
wp-gpios = <&gpio1 2 0>;
cd-gpios = <&gpio1 4 0>;
@@ -45,13 +48,13 @@
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_2>;
+ pinctrl-0 = <&pinctrl_uart3>;
status = "disabled";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <4>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
<&gpio3 24 0>, <&gpio3 25 0>;
@@ -60,7 +63,7 @@
&esdhc3 { /* EMMC */
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
+ pinctrl-0 = <&pinctrl_esdhc3>;
vmmc-supply = <®_3p3v>;
non-removable;
bus-width = <8>;
@@ -71,27 +74,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- esdhc2_2 {
- pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 {
- fsl,pins = <
- MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */
- MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */
- >;
- };
- };
-
- i2s {
- pinctrl_i2s_1: i2s-grp1 {
- fsl,pins = <
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 /* I2S_SCLK */
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 /* I2S_DOUT */
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 /* I2S_DIN */
- >;
- };
- };
-
- hog {
+ imx53-tqma53 {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
@@ -107,43 +90,165 @@
MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000
+ MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
+ MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_cspi: cspigrp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5
+ MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5
+ MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc2_cdwp: esdhc2cdwp {
+ fsl,pins = <
+ MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */
+ MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */
+ >;
+ };
+
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
+ pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "disabled";
};
&can1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_2>;
+ pinctrl-0 = <&pinctrl_can1>;
status = "disabled";
};
&can2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2_1>;
+ pinctrl-0 = <&pinctrl_can2>;
status = "disabled";
};
&i2c3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_1>;
+ pinctrl-0 = <&pinctrl_i2c3>;
status = "disabled";
};
&cspi {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cspi_1>;
+ pinctrl-0 = <&pinctrl_cspi>;
fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
<&gpio1 21 0>;
@@ -152,7 +257,7 @@
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
pmic: mc34708@8 {
@@ -177,7 +282,7 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
new file mode 100644
index 0000000..0217dde3
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -0,0 +1,315 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Ka-Ro electronics TX53 module (LCD)";
+ compatible = "karo,tx53", "fsl,imx53";
+
+ aliases {
+ display = &display;
+ };
+
+ soc {
+ display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ crtcs = <&ipu 0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgb24_vga1>;
+ status = "okay";
+
+ display-timings {
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hsync-len = <96>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vsync-len = <2>;
+ vfront-porch = <12>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0350 {
+ clock-frequency = <6413760>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <34>;
+ hsync-len = <34>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0430 {
+ clock-frequency = <9009000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ vfront-porch = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0500 {
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0700 { /* same as ET0500 */
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETQ570 {
+ clock-frequency = <6596040>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <38>;
+ hsync-len = <30>;
+ hfront-porch = <30>;
+ vback-porch = <16>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ power-supply = <®_3v3>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <50>;
+ };
+
+ regulators {
+ reg_lcd_pwr: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "LCD POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_lcd_reset: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "LCD RESET";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_2v5>;
+ VDDIO-supply = <®_3v3>;
+ clocks = <&mclk>;
+ };
+
+ polytouch: edt-ft5x06@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 0>;
+ reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ touchscreen: tsc2007@48 {
+ compatible = "ti,tsc2007";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc2007>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 0>;
+ gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ ti,x-plate-ohms = <660>;
+ linux,wakeup;
+ };
+};
+
+&iomuxc {
+ imx53-tx53-x03x {
+ pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
+ fsl,pins = <
+ MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
+ MX53_PAD_EIM_A16__GPIO2_22 0x04 /* Reset */
+ MX53_PAD_EIM_A17__GPIO2_21 0x04 /* Wake */
+ >;
+ };
+
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
+ MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
+ MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
+ MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
+ MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
+ MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
+ MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
+ MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
+ >;
+ };
+
+ pinctrl_rgb24_vga1: rgb24-vgagrp1 {
+ fsl,pins = <
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
+ >;
+ };
+
+ pinctrl_tsc2007: tsc2007grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
+ >;
+ };
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp>;
+ /* sample keymap */
+ /* row/col 0,1 are mapped to KPP row/col 6,7 */
+ linux,keymap = <
+ MATRIX_KEY(6, 6, KEY_POWER)
+ MATRIX_KEY(6, 7, KEY_KP0)
+ MATRIX_KEY(6, 2, KEY_KP1)
+ MATRIX_KEY(6, 3, KEY_KP2)
+ MATRIX_KEY(7, 6, KEY_KP3)
+ MATRIX_KEY(7, 7, KEY_KP4)
+ MATRIX_KEY(7, 2, KEY_KP5)
+ MATRIX_KEY(7, 3, KEY_KP6)
+ MATRIX_KEY(2, 6, KEY_KP7)
+ MATRIX_KEY(2, 7, KEY_KP8)
+ MATRIX_KEY(2, 2, KEY_KP9)
+ >;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
new file mode 100644
index 0000000..6480471
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -0,0 +1,243 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Ka-Ro electronics TX53 module (LVDS)";
+ compatible = "karo,tx53", "fsl,imx53";
+
+ aliases {
+ display = &lvds0;
+ lvds0 = &lvds0;
+ lvds1 = &lvds1;
+ };
+
+ backlight0: backlight0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <®_3v3>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <50>;
+ };
+
+ backlight1: backlight1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 500000 0>;
+ power-supply = <®_3v3>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <50>;
+ };
+
+ regulators {
+ reg_lcd_pwr0: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "LVDS0 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_lcd_pwr1: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "LVDS1 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ touchscreen2: eeti@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eeti2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <23 0>;
+ wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ linux,wakeup;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_2v5>;
+ VDDIO-supply = <®_3v3>;
+ clocks = <&mclk>;
+ };
+
+ touchscreen1: eeti@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eeti1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 0>;
+ wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ linux,wakeup;
+ };
+};
+
+&iomuxc {
+ imx53-tx53-x13x {
+ pinctrl_i2c2: i2c2-grp1 {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_lvds0: lvds0grp {
+ fsl,pins = <
+ MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+ MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+ MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+ MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+ MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+ >;
+ };
+
+ pinctrl_lvds1: lvds1grp {
+ fsl,pins = <
+ MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+ MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+ MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+ MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+ MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
+ };
+
+ pinctrl_eeti1: eeti1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
+ >;
+ };
+
+ pinctrl_eeti2: eeti2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
+ >;
+ };
+ };
+};
+
+&ldb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "jeida";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&lvds_timing0>;
+ lvds_timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hsync-len = <60>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vsync-len = <10>;
+ vfront-porch = <7>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel@1 {
+ fsl,data-mapping = "jeida";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&lvds_timing1>;
+ lvds_timing1: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hsync-len = <60>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vsync-len = <10>;
+ vfront-porch = <7>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index f494766..e348796 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -1,122 +1,550 @@
/*
- * Copyright 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright 2012 <LW@KARO-electronics.de>
+ * based on imx53-qsb.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "imx53.dtsi"
+#include "imx53.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Ka-Ro TX53";
+ model = "Ka-Ro electronics TX53 module";
compatible = "karo,tx53", "fsl,imx53";
- memory {
- reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+ aliases {
+ can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
+ can1 = &can1;
+ ipu = &ipu;
+ reg_can_xcvr = ®_can_xcvr;
+ usbh1 = &usbh1;
+ usbotg = &usbotg;
+ };
+
+ clocks {
+ ckih1 {
+ clock-frequency = <0>;
+ };
+
+ mclk: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_key>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stk5led>;
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
};
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_2v5: regulator@0 {
compatible = "regulator-fixed";
- regulator-name = "3P3V";
+ reg = <0>;
+ regulator-name = "2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3v3: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ };
+
+ reg_can_xcvr: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_usbh1_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usbh1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_vbus>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usbotg_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usbotg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
+
+ sound {
+ compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
+ model = "tx53-audio-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ /* '1' based port numbers according to datasheet names */
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssi1>;
+ status = "okay";
};
&can1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
};
&can2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_can2>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ fsl,spi-num-chipselects = <2>;
+ status = "okay";
+
+ cs-gpios = <
+ &gpio2 30 GPIO_ACTIVE_HIGH
+ &gpio3 19 GPIO_ACTIVE_HIGH
+ >;
+
+ spidev0: spi@0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <54000000>;
+ };
+
+ spidev1: spi@1 {
+ compatible = "spidev";
+ reg = <1>;
+ spi-max-frequency = <54000000>;
+ };
};
&esdhc1 {
+ cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ fsl,wp-controller;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ status = "okay";
};
&esdhc2 {
+ cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+ fsl,wp-controller;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ status = "okay";
};
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
- status = "disabled";
+ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ phy-handle = <&phy0>;
+ mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gpio2>;
+ interrupts = <4>;
+ device_type = "ethernet-phy";
+ };
};
-&i2c3 {
+&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rtc1: ds1339@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ds1339>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <20 0>;
+ };
};
-&owire {
+&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_owire_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-tx53 {
+ pinctrl_hog: hoggrp {
+ /* pins not in use by any device on the Starterkit board series */
+ fsl,pins = <
+ /* CMOS Sensor Interface */
+ MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
+ MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
+ MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
+ MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
+ MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
+ MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
+ MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
+ MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
+ MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
+ MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
+ MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
+ MX53_PAD_GPIO_0__GPIO1_0 0x1f4
+ /* Module Specific Signal */
+ /* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
+ /* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
+ MX53_PAD_EIM_D29__GPIO3_29 0x1f4
+ MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
+ /* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
+ /* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
+ MX53_PAD_EIM_A19__GPIO2_19 0x1f4
+ MX53_PAD_EIM_A20__GPIO2_18 0x1f4
+ MX53_PAD_EIM_A21__GPIO2_17 0x1f4
+ MX53_PAD_EIM_A22__GPIO2_16 0x1f4
+ MX53_PAD_EIM_A23__GPIO6_6 0x1f4
+ MX53_PAD_EIM_A24__GPIO5_4 0x1f4
+ MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
+ MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
+ MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
+ /* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
+ /* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
+ MX53_PAD_GPIO_13__GPIO4_3 0x1f4
+ MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
+ MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
+ MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
+ MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
+ MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
+ MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
+ MX53_PAD_EIM_OE__GPIO2_25 0x1f4
+ MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
+ MX53_PAD_EIM_RW__GPIO2_26 0x1f4
+ MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
+ MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
+ MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
+ MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
+ MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
+ MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
+ MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
+ MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
+ MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
+ MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
+ };
+
+ pinctrl_ds1339: ds1339grp {
+ fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000
+ MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ MX53_PAD_EIM_D24__GPIO3_24 0x1f0
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ MX53_PAD_EIM_D25__GPIO3_25 0x1f0
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_gpio_key: gpio-keygrp {
+ fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
+ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000
+ MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ >;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
+ MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4
+ MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4
+ MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4
+ MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4
+ MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4
+ MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4
+ MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4
+ MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000
+ >;
+ };
+
+ pinctrl_ssi1: ssi1grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_ssi2: ssi2grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000
+ MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000
+ MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000
+ MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000
+ MX53_PAD_EIM_D27__GPIO3_27 0x1f0
+ >;
+ };
+
+ pinctrl_stk5led: stk5ledgrp {
+ fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5
+ MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
+ MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5
+ MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
+ >;
+ };
+
+ pinctrl_usbh1_vbus: usbh1-vbusgrp {
+ fsl,pins = <
+ MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
+ >;
+ };
+
+ pinctrl_usbotg_vbus: usbotg-vbusgrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
+ MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
+ >;
+ };
+ };
+};
+
+&ipu {
+ status = "okay";
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
};
&pwm2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm2_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ #pwm-cells = <3>;
+};
+
+&sdma {
+ fsl,sdma-ram-script-name = "sdma-imx53.bin";
};
&ssi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "disabled";
+ fsl,mode = "i2s-slave";
+ codec-handle = <&sgtl5000>;
+ status = "okay";
};
&ssi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_2>;
status = "disabled";
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>,
- <&pinctrl_uart1_3>;
+ pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
- status = "disabled";
+ status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_2>;
+ pinctrl-0 = <&pinctrl_uart2>;
fsl,uart-has-rtscts;
- status = "disabled";
+ status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
- status = "disabled";
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ phy_type = "utmi";
+ disable-over-current;
+ vbus-supply = <®_usbh1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ phy_type = "utmi";
+ dr_mode = "peripheral";
+ disable-over-current;
+ vbus-supply = <®_usbotg_vbus>;
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
new file mode 100644
index 0000000..7f6711a
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+ sound {
+ compatible = "fsl,imx53-voipac-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-voipac-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio>;
+
+ led1 {
+ label = "led-red";
+ gpios = <&gpio3 29 0>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "led-orange";
+ gpios = <&gpio2 31 0>;
+ default-state = "off";
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-voipac {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SD2_CD */
+ MX53_PAD_EIM_D25__GPIO3_25 0x80000000
+ /* SD2_WP */
+ MX53_PAD_EIM_A19__GPIO2_19 0x80000000
+ >;
+ };
+
+ led_pin_gpio: led_gpio {
+ fsl,pins = <
+ MX53_PAD_EIM_D29__GPIO3_29 0x80000000
+ MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
+ >;
+ };
+
+ /* Keyboard controller */
+ pinctrl_kpp_1: kppgrp-1 {
+ fsl,pins = <
+ MX53_PAD_GPIO_9__KPP_COL_6 0xe8
+ MX53_PAD_GPIO_4__KPP_COL_7 0xe8
+ MX53_PAD_KEY_COL2__KPP_COL_2 0xe8
+ MX53_PAD_KEY_COL3__KPP_COL_3 0xe8
+ MX53_PAD_KEY_COL4__KPP_COL_4 0xe8
+ MX53_PAD_GPIO_2__KPP_ROW_6 0xe0
+ MX53_PAD_GPIO_5__KPP_ROW_7 0xe0
+ MX53_PAD_KEY_ROW2__KPP_ROW_2 0xe0
+ MX53_PAD_KEY_ROW3__KPP_ROW_3 0xe0
+ MX53_PAD_KEY_ROW4__KPP_ROW_4 0xe0
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000
+ MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ >;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
+ status = "okay";
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ cd-gpios = <&gpio3 25 0>;
+ wp-gpios = <&gpio2 19 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ clocks = <&clks 150>;
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp_1>;
+ linux,keymap = <
+ 0x0203003b /* KEY_F1 */
+ 0x0603003c /* KEY_F2 */
+ 0x0207003d /* KEY_F3 */
+ 0x0607003e /* KEY_F4 */
+ >;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <1>;
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 0000000..ba689fb
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,277 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ model = "Voipac i.MX53 X53-DMM-668";
+ compatible = "voipac,imx53-dmm-668", "fsl,imx53";
+
+ memory@70000000 {
+ device_type = "memory";
+ reg = <0x70000000 0x20000000>;
+ };
+
+ memory@b0000000 {
+ device_type = "memory";
+ reg = <0xb0000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 31 0>; /* PEN */
+ enable-active-high;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-voipac {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* Make DA9053 regulator functional */
+ MX53_PAD_GPIO_16__GPIO7_11 0x80000000
+ /* FEC Power enable */
+ MX53_PAD_GPIO_11__GPIO4_1 0x80000000
+ /* FEC RST */
+ MX53_PAD_GPIO_12__GPIO4_2 0x80000000
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
+ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
+ MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
+ MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
+ MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
+ MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
+ MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
+ MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
+ MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
+ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
+ >;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ fsl,spi-num-chipselects = <4>;
+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio4 2 0>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: dialog@48 {
+ compatible = "dlg,da9053-aa", "dlg,da9052";
+ reg = <0x48>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-name = "BUCKCORE";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "BUCKPRO";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "BUCKMEM";
+ regulator-min-microvolt = <1420000>;
+ regulator-max-microvolt = <1580000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: buck4 {
+ regulator-name = "BUCKPERI";
+ regulator-min-microvolt = <2370000>;
+ regulator-max-microvolt = <2630000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "ldo3_3v3";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "ldo4_2v775";
+ regulator-min-microvolt = <2770000>;
+ regulator-max-microvolt = <2780000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "ldo5_3v3";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "ldo6_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "ldo7_2v75";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "ldo8_1v8";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-name = "ldo9_1v5";
+ regulator-min-microvolt = <1450000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-name = "ldo10_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_vbus>;
+ phy_type = "utmi";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 4307e80..80615df 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -12,6 +12,9 @@
#include "skeleton.dtsi"
#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
aliases {
@@ -25,6 +28,10 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ mmc0 = &esdhc1;
+ mmc1 = &esdhc2;
+ mmc2 = &esdhc3;
+ mmc3 = &esdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -84,12 +91,25 @@
interrupt-parent = <&tzic>;
ranges;
+ sata: sata@10000000 {
+ compatible = "fsl,imx53-ahci";
+ reg = <0x10000000 0x1000>;
+ interrupts = <28>;
+ clocks = <&clks IMX5_CLK_SATA_GATE>,
+ <&clks IMX5_CLK_SATA_REF>,
+ <&clks IMX5_CLK_AHB>;
+ clock-names = "sata_gate", "sata_ref", "ahb";
+ status = "disabled";
+ };
+
ipu: ipu@18000000 {
#crtc-cells = <1>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
- clocks = <&clks 59>, <&clks 110>, <&clks 61>;
+ clocks = <&clks IMX5_CLK_IPU_GATE>,
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
};
@@ -112,7 +132,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
- clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -122,7 +144,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
- clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -132,7 +156,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
- clocks = <&clks 32>, <&clks 33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -143,16 +168,19 @@
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
- clocks = <&clks 51>, <&clks 52>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
ssi2: ssi@50014000 {
- compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ compatible = "fsl,imx53-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
- clocks = <&clks 49>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
@@ -165,7 +193,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
- clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -175,7 +205,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
- clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -184,14 +216,14 @@
usbphy0: usbphy@0 {
compatible = "usb-nop-xceiv";
- clocks = <&clks 124>;
+ clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
clock-names = "main_clk";
status = "okay";
};
usbphy1: usbphy@1 {
compatible = "usb-nop-xceiv";
- clocks = <&clks 125>;
+ clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
clock-names = "main_clk";
status = "okay";
};
@@ -200,7 +232,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
@@ -210,7 +242,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
@@ -220,7 +252,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
@@ -229,7 +261,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
@@ -238,7 +270,7 @@
#index-cells = <1>;
compatible = "fsl,imx53-usbmisc";
reg = <0x53f80800 0x200>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
};
gpio1: gpio@53f84000 {
@@ -281,18 +313,26 @@
#interrupt-cells = <2>;
};
+ kpp: kpp@53f94000 {
+ compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+ reg = <0x53f94000 0x4000>;
+ interrupts = <60>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ status = "disabled";
+ };
+
wdog1: wdog@53f98000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
};
wdog2: wdog@53f9c000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
@@ -300,521 +340,14 @@
compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
reg = <0x53fa0000 0x4000>;
interrupts = <39>;
- clocks = <&clks 36>, <&clks 41>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
-
- audmux {
- pinctrl_audmux_1: audmuxgrp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
- >;
- };
-
- pinctrl_audmux_2: audmuxgrp-2 {
- fsl,pins = <
- MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000
- MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000
- MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000
- MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000
- >;
- };
-
- pinctrl_audmux_3: audmuxgrp-3 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000
- MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000
- MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000
- MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000
- >;
- };
- };
-
- fec {
- pinctrl_fec_1: fecgrp-1 {
- fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
- >;
- };
-
- pinctrl_fec_2: fecgrp-2 {
- fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
- MX53_PAD_KEY_ROW1__FEC_COL 0x80000000
- MX53_PAD_KEY_COL3__FEC_CRS 0x80000000
- MX53_PAD_KEY_COL2__FEC_RDATA_2 0x80000000
- MX53_PAD_KEY_COL0__FEC_RDATA_3 0x80000000
- MX53_PAD_KEY_COL1__FEC_RX_CLK 0x80000000
- MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x80000000
- MX53_PAD_GPIO_19__FEC_TDATA_3 0x80000000
- MX53_PAD_KEY_ROW0__FEC_TX_ER 0x80000000
- >;
- };
- };
-
- csi {
- pinctrl_csi_1: csigrp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1d5
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5
- MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x1d5
- MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x1d5
- MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x1d5
- MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x1d5
- MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x1d5
- MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x1d5
- MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x1d5
- MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x1d5
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
- >;
- };
-
- pinctrl_csi_2: csigrp-2 {
- fsl,pins = <
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5
- >;
- };
- };
-
- cspi {
- pinctrl_cspi_1: cspigrp-1 {
- fsl,pins = <
- MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5
- MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5
- MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5
- >;
- };
-
- pinctrl_cspi_2: cspigrp-2 {
- fsl,pins = <
- MX53_PAD_EIM_D22__CSPI_MISO 0x1d5
- MX53_PAD_EIM_D28__CSPI_MOSI 0x1d5
- MX53_PAD_EIM_D21__CSPI_SCLK 0x1d5
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
- MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
- MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
- >;
- };
-
- pinctrl_ecspi1_2: ecspi1grp-2 {
- fsl,pins = <
- MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000
- MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000
- MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
- MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
- MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
- MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000
- >;
- };
- };
-
- ecspi2 {
- pinctrl_ecspi2_1: ecspi2grp-1 {
- fsl,pins = <
- MX53_PAD_EIM_OE__ECSPI2_MISO 0x80000000
- MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x80000000
- MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x80000000
- >;
- };
- };
-
- esdhc1 {
- pinctrl_esdhc1_1: esdhc1grp-1 {
- fsl,pins = <
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
- MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
- MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
- >;
- };
-
- pinctrl_esdhc1_2: esdhc1grp-2 {
- fsl,pins = <
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
- MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5
- MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5
- MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5
- MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5
- MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
- MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
- >;
- };
- };
-
- esdhc2 {
- pinctrl_esdhc2_1: esdhc2grp-1 {
- fsl,pins = <
- MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
- MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
- MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
- MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
- MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
- MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
- >;
- };
- };
-
- esdhc3 {
- pinctrl_esdhc3_1: esdhc3grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
- MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
- >;
- };
- };
-
- can1 {
- pinctrl_can1_1: can1grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x80000000
- MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x80000000
- >;
- };
-
- pinctrl_can1_2: can1grp-2 {
- fsl,pins = <
- MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000
- MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
- >;
- };
-
- pinctrl_can1_3: can1grp-3 {
- fsl,pins = <
- MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
- MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
- >;
- };
- };
-
- can2 {
- pinctrl_can2_1: can2grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
- MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
- >;
- };
- };
-
- i2c1 {
- pinctrl_i2c1_1: i2c1grp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
- MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
- >;
- };
-
- pinctrl_i2c1_2: i2c1grp-2 {
- fsl,pins = <
- MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
- MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
- >;
- };
- };
-
- i2c2 {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
- MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
- >;
- };
-
- pinctrl_i2c2_2: i2c2grp-2 {
- fsl,pins = <
- MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
- MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
- >;
- };
- };
-
- i2c3 {
- pinctrl_i2c3_1: i2c3grp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
- MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
- >;
- };
- };
-
- ipu_disp0 {
- pinctrl_ipu_disp0_1: ipudisp0grp-1 {
- fsl,pins = <
- MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
- MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
- MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
- MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
- MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
- MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
- MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
- MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
- MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
- MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
- MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
- MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
- MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
- MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
- MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
- MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
- MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
- MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
- MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
- MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
- MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
- MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
- MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
- MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
- MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
- MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
- MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
- MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
- >;
- };
- };
-
- ipu_disp1 {
- pinctrl_ipu_disp1_1: ipudisp1grp-1 {
- fsl,pins = <
- MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5
- MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5
- MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5
- MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5
- MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5
- MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5
- MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5
- MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5
- MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5
- MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5
- MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5
- MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5
- MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5
- MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5
- MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5
- MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5
- MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5
- MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5
- MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5
- MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5
- MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5
- MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5
- MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5
- MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5
- MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5
- MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5
- MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5
- MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5
- MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5
- MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5
- MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5
- MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5
- >;
- };
- };
-
- ipu_disp2 {
- pinctrl_ipu_disp2_1: ipudisp2grp-1 {
- fsl,pins = <
- MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
- MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
- MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
- MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
- MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
- MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
- MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
- MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
- MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
- MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
- >;
- };
- };
-
- nand {
- pinctrl_nand_1: nandgrp-1 {
- fsl,pins = <
- MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
- MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
- MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
- MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
- MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
- MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
- MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
- MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
- MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
- MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
- MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
- MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
- MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
- MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
- MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
- >;
- };
- };
-
- owire {
- pinctrl_owire_1: owiregrp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_18__OWIRE_LINE 0x80000000
- >;
- };
- };
-
- pwm1 {
- pinctrl_pwm1_1: pwm1grp-1 {
- fsl,pins = <
- MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
- >;
- };
- };
-
- pwm2 {
- pinctrl_pwm2_1: pwm2grp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
- >;
- };
-
- pinctrl_uart1_2: uart1grp-2 {
- fsl,pins = <
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
- >;
- };
-
- pinctrl_uart1_3: uart1grp-3 {
- fsl,pins = <
- MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5
- MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5
- >;
- };
- };
-
- uart2 {
- pinctrl_uart2_1: uart2grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
- >;
- };
-
- pinctrl_uart2_2: uart2grp-2 {
- fsl,pins = <
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
- MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5
- MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5
- >;
- };
- };
-
- uart3 {
- pinctrl_uart3_1: uart3grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
- MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
- MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
- >;
- };
-
- pinctrl_uart3_2: uart3grp-2 {
- fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
- >;
- };
-
- };
-
- uart4 {
- pinctrl_uart4_1: uart4grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
- MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
- >;
- };
- };
-
- uart5 {
- pinctrl_uart5_1: uart5grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
- MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
- >;
- };
- };
};
gpr: iomuxc-gpr@53fa8000 {
@@ -828,9 +361,12 @@
compatible = "fsl,imx53-ldb";
reg = <0x53fa8008 0x4>;
gpr = <&gpr>;
- clocks = <&clks 122>, <&clks 120>,
- <&clks 115>, <&clks 116>,
- <&clks 123>, <&clks 85>;
+ clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+ <&clks IMX5_CLK_LDB_DI1_SEL>,
+ <&clks IMX5_CLK_IPU_DI0_SEL>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>,
+ <&clks IMX5_CLK_LDB_DI0_GATE>,
+ <&clks IMX5_CLK_LDB_DI1_GATE>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel",
"di0", "di1";
@@ -853,7 +389,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
- clocks = <&clks 37>, <&clks 38>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -862,7 +399,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
- clocks = <&clks 39>, <&clks 40>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -871,7 +409,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
- clocks = <&clks 28>, <&clks 29>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -880,7 +419,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
- clocks = <&clks 30>, <&clks 31>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -889,7 +429,8 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
- clocks = <&clks 158>, <&clks 157>;
+ clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+ <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -898,7 +439,8 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
- clocks = <&clks 87>, <&clks 86>;
+ clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+ <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -952,7 +494,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
- clocks = <&clks 88>;
+ clocks = <&clks IMX5_CLK_I2C3_GATE>;
status = "disabled";
};
@@ -960,7 +502,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
- clocks = <&clks 65>, <&clks 66>;
+ clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+ <&clks IMX5_CLK_UART4_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -977,14 +520,15 @@
compatible = "fsl,imx53-iim", "fsl,imx27-iim";
reg = <0x63f98000 0x4000>;
interrupts = <69>;
- clocks = <&clks 107>;
+ clocks = <&clks IMX5_CLK_IIM_GATE>;
};
uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
- clocks = <&clks 67>, <&clks 68>;
+ clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+ <&clks IMX5_CLK_UART5_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -992,7 +536,7 @@
owire: owire@63fa4000 {
compatible = "fsl,imx53-owire", "fsl,imx21-owire";
reg = <0x63fa4000 0x4000>;
- clocks = <&clks 159>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
status = "disabled";
};
@@ -1002,7 +546,8 @@
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
- clocks = <&clks 53>, <&clks 54>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -1011,7 +556,8 @@
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
- clocks = <&clks 56>, <&clks 56>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
@@ -1023,7 +569,8 @@
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 55>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -1034,7 +581,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
- clocks = <&clks 35>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
status = "disabled";
};
@@ -1044,15 +591,16 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
- clocks = <&clks 34>;
+ clocks = <&clks IMX5_CLK_I2C1_GATE>;
status = "disabled";
};
ssi1: ssi@63fcc000 {
- compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
- clocks = <&clks 48>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
@@ -1071,15 +619,16 @@
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
- clocks = <&clks 60>;
+ clocks = <&clks IMX5_CLK_NFC_GATE>;
status = "disabled";
};
ssi3: ssi@63fe8000 {
- compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
- clocks = <&clks 50>;
+ clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";
@@ -1092,7 +641,9 @@
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
- clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
@@ -1101,7 +652,8 @@
compatible = "fsl,imx53-tve";
reg = <0x63ff0000 0x1000>;
interrupts = <92>;
- clocks = <&clks 69>, <&clks 116>;
+ clocks = <&clks IMX5_CLK_TVE_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>;
clock-names = "tve", "di_sel";
crtcs = <&ipu 1>;
status = "disabled";
@@ -1111,7 +663,8 @@
compatible = "fsl,imx53-vpu";
reg = <0x63ff4000 0x1000>;
interrupts = <9>;
- clocks = <&clks 63>, <&clks 63>;
+ clocks = <&clks IMX5_CLK_VPU_GATE>,
+ <&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb";
iram = <&ocram>;
status = "disabled";
@@ -1121,7 +674,7 @@
ocram: sram@f8000000 {
compatible = "mmio-sram";
reg = <0xf8000000 0x20000>;
- clocks = <&clks 186>;
+ clocks = <&clks IMX5_CLK_OCRAM>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
new file mode 100644
index 0000000..994f96a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+ model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
+ compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/imx6dl-gw51xx.dts
new file mode 100644
index 0000000..4bd055f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite GW51XX";
+ compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts
new file mode 100644
index 0000000..c913605
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite GW52XX";
+ compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts
new file mode 100644
index 0000000..61818a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite GW53XX";
+ compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts
new file mode 100644
index 0000000..ab38b67
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite GW54XX";
+ compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
new file mode 100644
index 0000000..5f4d33c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+ model = "Freescale i.MX6 DualLite Nitrogen6x Board";
+ compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h
index b81a7a4e..0ead323 100644
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ b/arch/arm/boot/dts/imx6dl-pinfunc.h
@@ -755,6 +755,7 @@
#define MX6QDL_PAD_GPIO_5__I2C3_SCL 0x230 0x600 0x878 0x6 0x2
#define MX6QDL_PAD_GPIO_5__ARM_EVENTI 0x230 0x600 0x000 0x7 0x0
#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x234 0x604 0x840 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ 0x234 0x604 0x03c 0x11 0xff000609
#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x234 0x604 0x87c 0x2 0x2
#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x234 0x604 0x000 0x5 0x0
#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x234 0x604 0x000 0x6 0x0
@@ -950,6 +951,7 @@
#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19 0x2d8 0x6c0 0x000 0x5 0x0
#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M 0x2d8 0x6c0 0x000 0x7 0x0
#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x2dc 0x6c4 0x928 0x0 0x1
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x2dc 0x6c4 0x000 0x2 0x0
#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x2dc 0x6c4 0x000 0x3 0x0
#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x2dc 0x6c4 0x000 0x5 0x0
#define MX6QDL_PAD_SD1_CMD__SD1_CMD 0x2e0 0x6c8 0x000 0x0 0x0
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts
new file mode 100644
index 0000000..2de0447
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+ model = "Freescale i.MX6 DualLite SABRE Lite Board";
+ compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 9e8ae11..9c4942f 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -8,6 +8,7 @@
*
*/
+#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6dl-pinfunc.h"
#include "imx6qdl.dtsi"
@@ -21,6 +22,26 @@
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1275000
+ 792000 1175000
+ 396000 1075000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1175000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks 104>, <&clks 6>, <&clks 16>,
+ <&clks 17>, <&clks 170>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
cpu@1 {
@@ -45,17 +66,17 @@
pxp: pxp@020f0000 {
reg = <0x020f0000 0x4000>;
- interrupts = <0 98 0x04>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
};
epdc: epdc@020f4000 {
reg = <0x020f4000 0x4000>;
- interrupts = <0 97 0x04>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
};
lcdif: lcdif@020f8000 {
reg = <0x020f8000 0x4000>;
- interrupts = <0 39 0x04>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -65,7 +86,7 @@
#size-cells = <0>;
compatible = "fsl,imx1-i2c";
reg = <0x021f8000 0x4000>;
- interrupts = <0 35 0x04>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index edf1bd9..78df05e 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -23,14 +23,27 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ reg_usb_otg_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
};
leds {
@@ -46,7 +59,7 @@
&gpmi {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
status = "disabled"; /* gpmi nand conflicts with SD */
};
@@ -54,28 +67,131 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx6q-arm2 {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
>;
};
- };
- arm2 {
- pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_cdwp: usdhc3cdwp {
fsl,pins = <
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
>;
};
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
};
};
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_2>;
+ pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
status = "okay";
};
@@ -84,8 +200,8 @@
wp-gpios = <&gpio6 14 0>;
vmmc-supply = <®_3p3v>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1
- &pinctrl_usdhc3_arm2>;
+ pinctrl-0 = <&pinctrl_usdhc3
+ &pinctrl_usdhc3_cdwp>;
status = "okay";
};
@@ -93,13 +209,13 @@
non-removable;
vmmc-supply = <®_3p3v>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4_1>;
+ pinctrl-0 = <&pinctrl_usdhc4>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_2>;
+ pinctrl-0 = <&pinctrl_uart2>;
fsl,dte-mode;
fsl,uart-has-rtscts;
status = "okay";
@@ -107,6 +223,6 @@
&uart4 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4_1>;
+ pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
new file mode 100644
index 0000000..99b46f8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ *
+ * Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+ model = "CompuLab CM-FX6";
+ compatible = "compulab,cm-fx6", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat-led {
+ label = "Heartbeat";
+ gpios = <&gpio2 31 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6q-cm-fx6 {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
new file mode 100644
index 0000000..fd0ad9a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6q.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+ model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
+ compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
new file mode 100644
index 0000000..a63bbb3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -0,0 +1,372 @@
+/*
+ * Copyright 2013 Data Modul AG
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+ model = "Data Modul eDM-QMX6 Board";
+ compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+
+ aliases {
+ gpio7 = &stmpe_gpio;
+ };
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 12 0>;
+ };
+
+ reg_usb_host1: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_host1_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 31 0>;
+ enable-active-high;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ label = "blue";
+ gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-green {
+ label = "green";
+ gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-pink {
+ label = "pink";
+ gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-red {
+ label = "red";
+ gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 0>;
+ phy-supply = <&vgen2_1v2_eth>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2
+ &pinctrl_stmpe>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <20 8>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-always-on;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_1v2_eth: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vdd_high_in: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ stmpe: stmpe1601@40 {
+ compatible = "st,stmpe1601";
+ reg = <0x40>;
+ interrupts = <30 0>;
+ interrupt-parent = <&gpio3>;
+
+ stmpe_gpio: stmpe_gpio {
+ #gpio-cells = <2>;
+ compatible = "st,stmpe-gpio";
+ };
+ };
+
+ temp1: ad7414@4c {
+ compatible = "ad,ad7414";
+ reg = <0x4c>;
+ };
+
+ temp2: ad7414@4d {
+ compatible = "ad,ad7414";
+ reg = <0x4d>;
+ };
+
+ rtc: m41t62@68 {
+ compatible = "stm,m41t62";
+ reg = <0x68>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-dmo-edmqmx6 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_host1>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
new file mode 100644
index 0000000..4a9b4dc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2013 Philipp Zabel
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+ model = "Zealz GK802";
+ compatible = "zealz,imx6q-gk802", "fsl,imx6q";
+
+ chosen {
+ linux,stdout-path = &uart4;
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ recovery-button {
+ label = "recovery";
+ gpios = <&gpio3 16 1>;
+ linux,code = <0x198>; /* KEY_RESTART */
+ gpio-key,wakeup;
+ };
+ };
+};
+
+/* Internal I2C */
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ /* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
+ eeprom: dm2016@51 {
+ compatible = "sdmc,dm2016";
+ reg = <0x51>;
+ };
+};
+
+/* External I2C via HDMI */
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-gk802 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* Recovery button, active-low */
+ MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x100b1
+ /* RTL8192CU enable GPIO, active-low */
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ >;
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+/* External USB-A port (USBOTG) */
+&usbotg {
+ disable-over-current;
+ status = "okay";
+};
+
+/* Internal USB port (USBH1), connected to RTL8192CU */
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+/* External microSD */
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 11 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+/* Internal microSD */
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts
new file mode 100644
index 0000000..af4929a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Quad GW51XX";
+ compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts
new file mode 100644
index 0000000..5f71ddb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Quad GW52XX";
+ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts
new file mode 100644
index 0000000..360c316
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Quad GW53XX";
+ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
new file mode 100644
index 0000000..902f983
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -0,0 +1,546 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+ model = "Gateworks Ventana GW5400-A";
+ compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
+
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = ð1;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ sky2 = ð1;
+ ssi0 = &ssi1;
+ spi0 = &ecspi1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ usdhc2 = &usdhc3;
+ };
+
+ chosen {
+ bootargs = "console=ttymxc1,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ gpios = <&gpio1 5 0>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_1p0v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "sst,w25q256";
+ spi-max-frequency = <30000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 30 0>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hwmon: gsc@29 {
+ compatible = "gw,gsp";
+ reg = <0x29>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pciswitch: pex8609@3f {
+ compatible = "plx,pex8609";
+ reg = <0x3f>;
+ };
+
+ pciclkgen: si52147@6b {
+ compatible = "sil,si52147";
+ reg = <0x6b>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <&sw4_reg>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ hdmiin: adv7611@4c {
+ compatible = "adi,adv7611";
+ reg = <0x4c>;
+ };
+
+ touchscreen: egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 2>; /* gpio7_12 active low */
+ wakeup-gpios = <&gpio7 12 0>;
+ };
+
+ videoout: adv7393@2a {
+ compatible = "adi,adv7393";
+ reg = <0x2a>;
+ };
+
+ videoin: adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-gw5400-a {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+ lvds-channel@0 {
+ crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 29 0>;
+ status = "okay";
+
+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
+ compatible = "marvell,sky2";
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
new file mode 100644
index 0000000..ab518d6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Quad GW54XX";
+ compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
new file mode 100644
index 0000000..a57866b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad Nitrogen6x Board";
+ compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
index 7d37ec6..5607c33 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -21,10 +21,26 @@
status = "okay";
};
+&gpmi {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
&uart4 {
status = "okay";
};
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
&usdhc2 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
index 1a3b50d..324f155 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -18,11 +18,35 @@
memory {
reg = <0x10000000 0x80000000>;
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 15 0>;
+ };
+
+ reg_usb_h1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 0 0>;
+ };
+ };
};
&ecspi3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi3_1>;
+ pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 0>;
@@ -36,7 +60,7 @@
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
eeprom@50 {
@@ -128,7 +152,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx6q-phytec-pfla02 {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
@@ -136,10 +160,109 @@
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
>;
};
- };
- pfla02 {
- pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_cdwp: usdhc3cdwp {
fsl,pins = <
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
@@ -150,21 +273,43 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_3>;
+ pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "disabled";
};
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "disabled";
+};
+
&uart4 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4_1>;
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "disabled";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ status = "disabled";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
status = "disabled";
};
&usdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2_2>;
+ pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio1 4 0>;
wp-gpios = <&gpio1 2 0>;
status = "disabled";
@@ -172,8 +317,8 @@
&usdhc3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2
- &pinctrl_usdhc3_pfla02>;
+ pinctrl-0 = <&pinctrl_usdhc3
+ &pinctrl_usdhc3_cdwp>;
cd-gpios = <&gpio1 27 0>;
wp-gpios = <&gpio1 29 0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
index 97ed081..9fc6120 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/imx6q-pinfunc.h
@@ -673,6 +673,7 @@
#define MX6QDL_PAD_GPIO_3__USB_H1_OC 0x22c 0x5fc 0x948 0x6 0x1
#define MX6QDL_PAD_GPIO_3__MLB_CLK 0x22c 0x5fc 0x900 0x7 0x1
#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK 0x230 0x600 0x870 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ 0x230 0x600 0x03c 0x11 0xff000609
#define MX6QDL_PAD_GPIO_6__I2C3_SDA 0x230 0x600 0x8ac 0x2 0x1
#define MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x230 0x600 0x000 0x5 0x0
#define MX6QDL_PAD_GPIO_6__SD2_LCTL 0x230 0x600 0x000 0x6 0x0
@@ -1024,6 +1025,7 @@
#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB 0x34c 0x734 0x000 0x6 0x0
#define MX6QDL_PAD_SD1_CLK__SD1_CLK 0x350 0x738 0x000 0x0 0x0
#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x350 0x738 0x828 0x1 0x0
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x350 0x738 0x000 0x2 0x0
#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN 0x350 0x738 0x000 0x3 0x0
#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x350 0x738 0x000 0x5 0x0
#define MX6QDL_PAD_SD2_CLK__SD2_CLK 0x354 0x73c 0x000 0x0 0x0
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index f004913..96e4688 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -12,189 +12,13 @@
/dts-v1/;
#include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
/ {
model = "Freescale i.MX6 Quad SABRE Lite Board";
compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
- memory {
- reg = <0x10000000 0x40000000>;
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_2p5v: 2p5v {
- compatible = "regulator-fixed";
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
- reg_3p3v: 3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_usb_otg_vbus: usb_otg_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_otg_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
- enable-active-high;
- };
- };
-
- sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <4>;
- };
-};
-
-&audmux {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&ecspi1 {
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio3 19 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- status = "okay";
-
- flash: m25p80@0 {
- compatible = "sst,sst25vf016b";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 0>;
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&clks 201>;
- VDDA-supply = <®_2p5v>;
- VDDIO-supply = <®_3p3v>;
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
- MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
- >;
- };
- };
-};
-
-&ldb {
- status = "okay";
-
- lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&timing0>;
- timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- };
- };
- };
};
&sata {
status = "okay";
};
-
-&ssi1 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
-};
-
-&usbh1 {
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
- disable-over-current;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2>;
- cd-gpios = <&gpio7 0 0>;
- wp-gpios = <&gpio7 1 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
-
-&usdhc4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4_2>;
- cd-gpios = <&gpio2 6 0>;
- wp-gpios = <&gpio2 7 0>;
- vmmc-supply = <®_3p3v>;
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
index ee6addf..86cf093 100644
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ b/arch/arm/boot/dts/imx6q-sbc6x.dts
@@ -17,28 +17,78 @@
};
};
+
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
+ pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
status = "okay";
};
+&iomuxc {
+ imx6q-sbc6x {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+ };
+};
+
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
+ pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2>;
+ pinctrl-0 = <&pinctrl_usdhc3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
index 6e1ccdc..ed397d1 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -21,19 +21,69 @@
};
};
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&iomuxc {
+ imx6q-udoo {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+ };
+};
+
&sata {
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2>;
+ pinctrl-0 = <&pinctrl_usdhc3>;
non-removable;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index f024ef2..fadf498 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -8,10 +8,15 @@
*
*/
+#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6q-pinfunc.h"
#include "imx6qdl.dtsi"
/ {
+ aliases {
+ spi4 = &ecspi5;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -25,8 +30,17 @@
/* kHz uV */
1200000 1275000
996000 1250000
+ 852000 1250000
792000 1150000
- 396000 950000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks 104>, <&clks 6>, <&clks 16>,
@@ -74,7 +88,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
- interrupts = <0 35 0x04>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 116>, <&clks 116>;
clock-names = "ipg", "per";
status = "disabled";
@@ -125,7 +139,7 @@
sata: sata@02200000 {
compatible = "fsl,imx6q-ahci";
reg = <0x02200000 0x4000>;
- interrupts = <0 39 0x04>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 154>, <&clks 187>, <&clks 105>;
clock-names = "sata", "sata_ref", "ahb";
status = "disabled";
@@ -135,7 +149,8 @@
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";
reg = <0x02800000 0x400000>;
- interrupts = <0 8 0x4 0 7 0x4>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 133>, <&clks 134>, <&clks 137>;
clock-names = "bus", "di0", "di1";
resets = <&src 4>;
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
new file mode 100644
index 0000000..25cf035
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -0,0 +1,199 @@
+/ {
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dummy_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "dummy-supply";
+ };
+
+ reg_usb_otg_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = &uart1;
+ };
+};
+
+&ecspi3 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst,sst25vf040b", "m25p80";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ status = "okay";
+ phy-mode = "rgmii";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-dfi-fs700-m60 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+ >;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 { /* module slot */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio2 2 0>;
+ status = "okay";
+};
+
+&usdhc3 { /* baseboard slot */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+};
+
+&usdhc4 { /* eMMC */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
new file mode 100644
index 0000000..98a4221
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -0,0 +1,374 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ can0 = &can1;
+ ethernet0 = &fec;
+ led0 = &led0;
+ led1 = &led1;
+ nand = &gpmi;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ };
+
+ chosen {
+ bootargs = "console=ttymxc1,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ gpios = <&gpio1 26 0>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 30 0>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hwmon: gsc@29 {
+ compatible = "gw,gsp";
+ reg = <0x29>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: ltc3676@3c {
+ compatible = "ltc,ltc3676";
+ reg = <0x3c>;
+
+ regulators {
+ sw1_reg: ltc3676__sw1 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: ltc3676__sw2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: ltc3676__sw3 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: ltc3676__sw4 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ltc3676__ldo2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ltc3676__ldo4 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ videoin: adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-gw51xx {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 0 0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
new file mode 100644
index 0000000..8e99c9a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -0,0 +1,490 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ ethernet0 = &fec;
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ nand = &gpmi;
+ ssi0 = &ssi1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ usdhc2 = &usdhc3;
+ };
+
+ chosen {
+ bootargs = "console=ttymxc1,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ gpios = <&gpio1 26 0>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_1p0v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ /* remove this fixed regulator once ltc3676__sw2 driver available */
+ reg_1p8v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_5p0v: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 30 0>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hwmon: gsc@29 {
+ compatible = "gw,gsp";
+ reg = <0x29>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pciswitch: pex8609@3f {
+ compatible = "plx,pex8609";
+ reg = <0x3f>;
+ };
+
+ pmic: ltc3676@3c {
+ compatible = "ltc,ltc3676";
+ reg = <0x3c>;
+
+ regulators {
+ sw1_reg: ltc3676__sw1 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: ltc3676__sw2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: ltc3676__sw3 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: ltc3676__sw4 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ltc3676__ldo2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ltc3676__ldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ltc3676__ldo4 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ accelerometer: fxos8700@1e {
+ compatible = "fsl,fxos8700";
+ reg = <0x13>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 169>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ touchscreen: egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 2>; /* gpio7_12 active low */
+ wakeup-gpios = <&gpio7 12 0>;
+ };
+
+ videoin: adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-gw52xx {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+ lvds-channel@0 {
+ crtcs = <&ipu1 0>, <&ipu1 1>;
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 29 0>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
new file mode 100644
index 0000000..c8e5ae0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -0,0 +1,553 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ can0 = &can1;
+ ethernet0 = &fec;
+ ethernet1 = ð1;
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ nand = &gpmi;
+ sky2 = ð1;
+ ssi0 = &ssi1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ usdhc2 = &usdhc3;
+ };
+
+ chosen {
+ bootargs = "console=ttymxc1,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ gpios = <&gpio1 26 0>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_1p0v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ /* remove when pmic 1p8 regulator available */
+ reg_1p8v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 30 0>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hwmon: gsc@29 {
+ compatible = "gw,gsp";
+ reg = <0x29>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pciclkgen: si53156@6b {
+ compatible = "sil,si53156";
+ reg = <0x6b>;
+ };
+
+ pciswitch: pex8606@3f {
+ compatible = "plx,pex8606";
+ reg = <0x3f>;
+ };
+
+ pmic: ltc3676@3c {
+ compatible = "ltc,ltc3676";
+ reg = <0x3c>;
+
+ regulators {
+ /* VDD_SOC */
+ sw1_reg: ltc3676__sw1 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8 */
+ sw2_reg: ltc3676__sw2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_ARM */
+ sw3_reg: ltc3676__sw3 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_DDR */
+ sw4_reg: ltc3676__sw4 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_2P5 */
+ ldo2_reg: ltc3676__ldo2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_1P8 */
+ ldo3_reg: ltc3676__ldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* VDD_HIGH */
+ ldo4_reg: ltc3676__ldo4 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ accelerometer: fxos8700@1e {
+ compatible = "fsl,fxos8700";
+ reg = <0x1e>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_1p8v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ hdmiin: adv7611@4c {
+ compatible = "adi,adv7611";
+ reg = <0x4c>;
+ };
+
+ touchscreen: egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 2>; /* gpio1_11 active low */
+ wakeup-gpios = <&gpio1 11 0>;
+ };
+
+ videoout: adv7393@2a {
+ compatible = "adi,adv7393";
+ reg = <0x2a>;
+ };
+
+ videoin: adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-gw53xx {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 29 0>;
+ status = "okay";
+
+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
+ compatible = "marvell,sky2";
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
new file mode 100644
index 0000000..2795dfc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -0,0 +1,580 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ can0 = &can1;
+ ethernet0 = &fec;
+ ethernet1 = ð1;
+ led0 = &led0;
+ led1 = &led1;
+ led2 = &led2;
+ nand = &gpmi;
+ sky2 = ð1;
+ ssi0 = &ssi1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ usdhc2 = &usdhc3;
+ };
+
+ chosen {
+ bootargs = "console=ttymxc1,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: user2 {
+ label = "user2";
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+ default-state = "off";
+ };
+
+ led2: user3 {
+ label = "user3";
+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ gpios = <&gpio1 26 0>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_1p0v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 30 0>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ hwmon: gsc@29 {
+ compatible = "gw,gsp";
+ reg = <0x29>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pciswitch: pex8609@3f {
+ compatible = "plx,pex8609";
+ reg = <0x3f>;
+ };
+
+ pciclkgen: si52147@6b {
+ compatible = "sil,si52147";
+ reg = <0x6b>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ accelerometer: fxos8700@1e {
+ compatible = "fsl,fxos8700";
+ reg = <0x1e>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <&sw4_reg>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ hdmiin: adv7611@4c {
+ compatible = "adi,adv7611";
+ reg = <0x4c>;
+ };
+
+ touchscreen: egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 2>; /* gpio7_12 active low */
+ wakeup-gpios = <&gpio7 12 0>;
+ };
+
+ videoout: adv7393@2a {
+ compatible = "adi,adv7393";
+ reg = <0x2a>;
+ };
+
+ videoin: adv7180@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-gw54xx {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 29 0>;
+ status = "okay";
+
+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
+ compatible = "marvell,sky2";
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
new file mode 100644
index 0000000..99be301
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -0,0 +1,422 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-nitrogen6x-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+
+ backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 27 0>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-nitrogen6x {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x000b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio2 6 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index ff6f1e8..009abd6 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -10,17 +10,46 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/gpio/gpio.h>
+
/ {
memory {
reg = <0x10000000 0x80000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif",
+ "fsl,imx-sabreauto-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-in;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ status = "okay";
+ };
};
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_sabreauto>;
+ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
status = "disabled"; /* pin conflict with WEIM NOR */
flash: m25p80@0 {
@@ -34,22 +63,130 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_2>;
+ pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
status = "okay";
};
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx6qdl-sabreauto {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
@@ -57,28 +194,245 @@
MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
>;
};
- };
- ecspi1 {
- pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi1_cs: ecspi1cs {
fsl,pins = <
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
>;
};
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_weim_cs0: weimcs0grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+ >;
+ };
+
+ pinctrl_weim_nor: weimnorgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+ MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+ MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+ MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+ MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+ MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+ MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+ MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+ MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+ MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+ MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+ MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+ MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+ MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+ MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+ MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+ MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+ MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+ MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+ MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+ MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+ MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+ MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+ MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+ MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+ MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+ MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+ MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+ MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+ MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+ MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+ MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+ MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+ MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+ MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+ MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+ MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+ MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+ MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+ MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+ MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+ MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+ MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+ >;
+ };
};
};
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif>;
+ status = "okay";
+};
+
&uart4 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4_1>;
+ pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3_1>;
- pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
cd-gpios = <&gpio6 15 0>;
wp-gpios = <&gpio1 13 0>;
status = "okay";
@@ -86,7 +440,7 @@
&weim {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_weim_nor_1 &pinctrl_weim_cs0_1>;
+ pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x08000000 0x08000000>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
new file mode 100644
index 0000000..3bec128
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,423 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
+
+ backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ backlight_lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ power-supply = <®_3p3v>;
+ status = "okay";
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6q-sabrelite {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
+ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
+ MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
+ MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 /* CS */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ /* Power Button */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ /* Menu Button */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ /* Home Button */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ /* Back Button */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* Volume Up Button */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ /* Volume Down Button */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */
+ >;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio7 0 0>;
+ wp-gpios = <&gpio7 1 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio2 6 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index e75e11b..0d816d3 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -10,6 +10,9 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
memory {
reg = <0x10000000 0x40000000>;
@@ -17,9 +20,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb_otg_vbus: usb_otg_vbus {
+ reg_usb_otg_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -27,8 +33,9 @@
enable-active-high;
};
- reg_usb_h1_vbus: usb_h1_vbus {
+ reg_usb_h1_vbus: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -36,8 +43,9 @@
enable-active-high;
};
- reg_audio: wm8962_supply {
+ reg_audio: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "wm8962-supply";
gpio = <&gpio4 10 0>;
enable-active-high;
@@ -46,19 +54,28 @@
gpio-keys {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ linux,code = <KEY_POWER>;
+ };
volume-up {
label = "Volume Up";
- gpios = <&gpio1 4 0>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
gpio-key,wakeup;
- linux,code = <115>; /* KEY_VOLUMEUP */
+ linux,code = <KEY_VOLUMEUP>;
};
volume-down {
label = "Volume Down";
- gpios = <&gpio1 5 0>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
gpio-key,wakeup;
- linux,code = <114>; /* KEY_VOLUMEDOWN */
+ linux,code = <KEY_VOLUMEDOWN>;
};
};
@@ -92,7 +109,7 @@
&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_2>;
+ pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
@@ -100,7 +117,7 @@
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 9 0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_2>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
flash: m25p80@0 {
@@ -114,7 +131,7 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
+ pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 25 0>;
status = "okay";
@@ -123,7 +140,7 @@
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_2>;
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
codec: wm8962@1a {
@@ -149,10 +166,116 @@
};
};
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
+ pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
egalax_ts@04 {
@@ -168,11 +291,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx6qdl-sabresd {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
@@ -184,6 +305,122 @@
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
+ MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
+ MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
+ MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
};
};
@@ -214,7 +451,7 @@
&pwm1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0_1>;
+ pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
@@ -225,7 +462,7 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
@@ -237,14 +474,14 @@
&usbotg {
vbus-supply = <®_usb_otg_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_2>;
+ pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2_1>;
+ pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <8>;
cd-gpios = <&gpio2 2 0>;
wp-gpios = <&gpio2 3 0>;
@@ -253,7 +490,7 @@
&usdhc3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1>;
+ pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <8>;
cd-gpios = <&gpio2 0 0>;
wp-gpios = <&gpio2 1 0>;
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 35f5479..bdfdf89 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -12,17 +12,21 @@
/ {
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_2p5v: 2p5v {
+ reg_2p5v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -54,14 +58,14 @@
&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_2>;
+ pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_2>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
codec: sgtl5000@0a {
@@ -77,7 +81,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx6qdl-wandboard {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
@@ -91,20 +95,121 @@
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
};
};
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_1>;
+ pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 29 0>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
};
&spdif {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spdif_3>;
+ pinctrl-0 = <&pinctrl_spdif>;
status = "okay";
};
@@ -115,13 +220,13 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_2>;
+ pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
status = "okay";
};
@@ -132,7 +237,7 @@
&usbotg {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg_1>;
+ pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
dr_mode = "peripheral";
status = "okay";
@@ -140,21 +245,21 @@
&usdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1_2>;
+ pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 2 0>;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2_2>;
+ pinctrl-0 = <&pinctrl_usdhc2>;
non-removable;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_2>;
+ pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio3 9 0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index fb28b2e..947e463 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -14,6 +14,8 @@
/ {
aliases {
+ can0 = &can1;
+ can1 = &can2;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -24,6 +26,10 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ mmc3 = &usdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -33,6 +39,8 @@
spi1 = &ecspi2;
spi2 = &ecspi3;
spi3 = &ecspi4;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
};
intc: interrupt-controller@00a01000 {
@@ -75,7 +83,10 @@
dma_apbh: dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x00110000 0x2000>;
- interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
#dma-cells = <1>;
dma-channels = <4>;
@@ -88,7 +99,7 @@
#size-cells = <1>;
reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
reg-names = "gpmi-nand", "bch";
- interrupts = <0 15 0x04>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bch";
clocks = <&clks 152>, <&clks 153>, <&clks 151>,
<&clks 150>, <&clks 149>;
@@ -109,7 +120,7 @@
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
- interrupts = <0 92 0x04>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
arm,tag-latency = <4 2 3>;
@@ -126,7 +137,7 @@
0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
- interrupts = <0 123 0x04>;
+ interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
status = "disabled";
@@ -134,7 +145,7 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 0x04>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
aips-bus@02000000 { /* AIPS1 */
@@ -154,7 +165,7 @@
spdif: spdif@02004000 {
compatible = "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
- interrupts = <0 52 0x04>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
@@ -176,9 +187,11 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
- interrupts = <0 31 0x04>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 112>, <&clks 112>;
clock-names = "ipg", "per";
+ dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -187,9 +200,11 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
- interrupts = <0 32 0x04>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 113>, <&clks 113>;
clock-names = "ipg", "per";
+ dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -198,9 +213,11 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
- interrupts = <0 33 0x04>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 114>, <&clks 114>;
clock-names = "ipg", "per";
+ dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -209,16 +226,18 @@
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
- interrupts = <0 34 0x04>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 115>, <&clks 115>;
clock-names = "ipg", "per";
+ dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@02020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
- interrupts = <0 26 0x04>;
+ interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
@@ -228,13 +247,15 @@
esai: esai@02024000 {
reg = <0x02024000 0x4000>;
- interrupts = <0 51 0x04>;
+ interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
};
ssi1: ssi@02028000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+ compatible = "fsl,imx6q-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
- interrupts = <0 46 0x04>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 178>;
dmas = <&sdma 37 1 0>,
<&sdma 38 1 0>;
@@ -245,9 +266,11 @@
};
ssi2: ssi@0202c000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+ compatible = "fsl,imx6q-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
- interrupts = <0 47 0x04>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 179>;
dmas = <&sdma 41 1 0>,
<&sdma 42 1 0>;
@@ -258,9 +281,11 @@
};
ssi3: ssi@02030000 {
- compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
+ compatible = "fsl,imx6q-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
- interrupts = <0 48 0x04>;
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 180>;
dmas = <&sdma 45 1 0>,
<&sdma 46 1 0>;
@@ -272,7 +297,7 @@
asrc: asrc@02034000 {
reg = <0x02034000 0x4000>;
- interrupts = <0 50 0x04>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
spba@0203c000 {
@@ -282,7 +307,8 @@
vpu: vpu@02040000 {
reg = <0x02040000 0x3c000>;
- interrupts = <0 3 0x04 0 12 0x04>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>;
};
aipstz@0207c000 { /* AIPSTZ1 */
@@ -293,7 +319,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
- interrupts = <0 83 0x04>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 62>, <&clks 145>;
clock-names = "ipg", "per";
};
@@ -302,7 +328,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
- interrupts = <0 84 0x04>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 62>, <&clks 146>;
clock-names = "ipg", "per";
};
@@ -311,7 +337,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
- interrupts = <0 85 0x04>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 62>, <&clks 147>;
clock-names = "ipg", "per";
};
@@ -320,7 +346,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
- interrupts = <0 86 0x04>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 62>, <&clks 148>;
clock-names = "ipg", "per";
};
@@ -328,23 +354,25 @@
can1: flexcan@02090000 {
compatible = "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
- interrupts = <0 110 0x04>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 108>, <&clks 109>;
clock-names = "ipg", "per";
+ status = "disabled";
};
can2: flexcan@02094000 {
compatible = "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
- interrupts = <0 111 0x04>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 110>, <&clks 111>;
clock-names = "ipg", "per";
+ status = "disabled";
};
gpt: gpt@02098000 {
compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
reg = <0x02098000 0x4000>;
- interrupts = <0 55 0x04>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 119>, <&clks 120>;
clock-names = "ipg", "per";
};
@@ -352,7 +380,8 @@
gpio1: gpio@0209c000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
- interrupts = <0 66 0x04 0 67 0x04>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+ <0 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -362,7 +391,8 @@
gpio2: gpio@020a0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
- interrupts = <0 68 0x04 0 69 0x04>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 69 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -372,7 +402,8 @@
gpio3: gpio@020a4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
- interrupts = <0 70 0x04 0 71 0x04>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 71 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -382,7 +413,8 @@
gpio4: gpio@020a8000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
- interrupts = <0 72 0x04 0 73 0x04>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+ <0 73 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -392,7 +424,8 @@
gpio5: gpio@020ac000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
- interrupts = <0 74 0x04 0 75 0x04>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+ <0 75 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -402,7 +435,8 @@
gpio6: gpio@020b0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020b0000 0x4000>;
- interrupts = <0 76 0x04 0 77 0x04>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
+ <0 77 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -412,7 +446,8 @@
gpio7: gpio@020b4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
reg = <0x020b4000 0x4000>;
- interrupts = <0 78 0x04 0 79 0x04>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
+ <0 79 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -421,20 +456,20 @@
kpp: kpp@020b8000 {
reg = <0x020b8000 0x4000>;
- interrupts = <0 82 0x04>;
+ interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
};
wdog1: wdog@020bc000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
- interrupts = <0 80 0x04>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 0>;
};
wdog2: wdog@020c0000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
- interrupts = <0 81 0x04>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 0>;
status = "disabled";
};
@@ -442,14 +477,17 @@
clks: ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
- interrupts = <0 87 0x04 0 88 0x04>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
};
anatop: anatop@020c8000 {
compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
- interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 54 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1@110 {
compatible = "fsl,anatop-regulator";
@@ -495,7 +533,7 @@
reg_arm: regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
- regulator-name = "cpu";
+ regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
@@ -547,23 +585,26 @@
tempmon: tempmon {
compatible = "fsl,imx6q-tempmon";
- interrupts = <0 49 0x04>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
fsl,tempmon = <&anatop>;
fsl,tempmon-data = <&ocotp>;
+ clocks = <&clks 172>;
};
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
- interrupts = <0 44 0x04>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 182>;
+ fsl,anatop = <&anatop>;
};
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
- interrupts = <0 45 0x04>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 183>;
+ fsl,anatop = <&anatop>;
};
snvs@020cc000 {
@@ -575,31 +616,34 @@
snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
- interrupts = <0 19 0x04 0 20 0x04>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>;
};
};
epit1: epit@020d0000 { /* EPIT1 */
reg = <0x020d0000 0x4000>;
- interrupts = <0 56 0x04>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
};
epit2: epit@020d4000 { /* EPIT2 */
reg = <0x020d4000 0x4000>;
- interrupts = <0 57 0x04>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
src: src@020d8000 {
compatible = "fsl,imx6q-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
- interrupts = <0 91 0x04 0 96 0x04>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+ <0 96 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
gpc: gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
- interrupts = <0 89 0x04 0 90 0x04>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
+ <0 90 IRQ_TYPE_LEVEL_HIGH>;
};
gpr: iomuxc-gpr@020e0000 {
@@ -610,744 +654,6 @@
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
-
- audmux {
- pinctrl_audmux_1: audmux-1 {
- fsl,pins = <
- MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x80000000
- MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x80000000
- MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x80000000
- MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
- >;
- };
-
- pinctrl_audmux_2: audmux-2 {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x80000000
- MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x80000000
- MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x80000000
- MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
- >;
- };
-
- pinctrl_audmux_3: audmux-3 {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x80000000
- MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
- MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x80000000
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
- >;
- };
-
- pinctrl_ecspi1_2: ecspi1grp-2 {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
- >;
- };
- };
-
- ecspi3 {
- pinctrl_ecspi3_1: ecspi3grp-1 {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
- MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
- MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
- >;
- };
- };
-
- enet {
- pinctrl_enet_1: enetgrp-1 {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- >;
- };
-
- pinctrl_enet_2: enetgrp-2 {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- >;
- };
-
- pinctrl_enet_3: enetgrp-3 {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
- >;
- };
- };
-
- esai {
- pinctrl_esai_1: esaigrp-1 {
- fsl,pins = <
- MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030
- MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
- MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030
- MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
- MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3 0x1b030
- MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030
- MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030
- MX6QDL_PAD_NANDF_CS2__ESAI_TX0 0x1b030
- MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030
- >;
- };
-
- pinctrl_esai_2: esaigrp-2 {
- fsl,pins = <
- MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
- MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030
- MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
- MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x1b030
- MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030
- MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030
- MX6QDL_PAD_GPIO_17__ESAI_TX0 0x1b030
- MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030
- MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1b030
- MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x1b030
- >;
- };
- };
-
- flexcan1 {
- pinctrl_flexcan1_1: flexcan1grp-1 {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
- MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
- >;
- };
-
- pinctrl_flexcan1_2: flexcan1grp-2 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000
- MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
- >;
- };
- };
-
- flexcan2 {
- pinctrl_flexcan2_1: flexcan2grp-1 {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
- MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
- >;
- };
- };
-
- gpmi-nand {
- pinctrl_gpmi_nand_1: gpmi-nand-1 {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
- };
-
- hdmi_hdcp {
- pinctrl_hdmi_hdcp_1: hdmihdcpgrp-1 {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_hdmi_hdcp_2: hdmihdcpgrp-2 {
- fsl,pins = <
- MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_hdmi_hdcp_3: hdmihdcpgrp-3 {
- fsl,pins = <
- MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
- >;
- };
- };
-
- hdmi_cec {
- pinctrl_hdmi_cec_1: hdmicecgrp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
- >;
- };
-
- pinctrl_hdmi_cec_2: hdmicecgrp-2 {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
- >;
- };
- };
-
- i2c1 {
- pinctrl_i2c1_1: i2c1grp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c1_2: i2c1grp-2 {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
- MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
- >;
- };
- };
-
- i2c2 {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c2_2: i2c2grp-2 {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c2_3: i2c2grp-3 {
- fsl,pins = <
- MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
- };
-
- i2c3 {
- pinctrl_i2c3_1: i2c3grp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3_2: i2c3grp-2 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3_3: i2c3grp-3 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3_4: i2c3grp-4 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- >;
- };
- };
-
- ipu1 {
- pinctrl_ipu1_1: ipu1grp-1 {
- fsl,pins = <
- MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
- MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
- MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
- MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
- MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x80000000
- MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
- MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
- MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
- MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
- MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
- MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
- MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
- MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
- MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
- MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
- MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
- MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
- MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
- MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
- MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
- MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
- MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
- MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
- MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
- MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
- MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
- MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
- MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
- MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
- >;
- };
-
- pinctrl_ipu1_2: ipu1grp-2 { /* parallel camera */
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x80000000
- MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x80000000
- MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x80000000
- MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x80000000
- MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x80000000
- MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x80000000
- MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x80000000
- MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x80000000
- MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x80000000
- MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000
- MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x80000000
- MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x80000000
- >;
- };
-
- pinctrl_ipu1_3: ipu1grp-3 { /* parallel port 16-bit */
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x80000000
- MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x80000000
- MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x80000000
- MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x80000000
- MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x80000000
- MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x80000000
- MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x80000000
- MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x80000000
- MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x80000000
- MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x80000000
- MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x80000000
- MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x80000000
- MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x80000000
- MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x80000000
- MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x80000000
- MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x80000000
- MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000
- MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x80000000
- MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x80000000
- >;
- };
- };
-
- mlb {
- pinctrl_mlb_1: mlbgrp-1 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_3__MLB_CLK 0x71
- MX6QDL_PAD_GPIO_6__MLB_SIG 0x71
- MX6QDL_PAD_GPIO_2__MLB_DATA 0x71
- >;
- };
-
- pinctrl_mlb_2: mlbgrp-2 {
- fsl,pins = <
- MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x71
- MX6QDL_PAD_GPIO_6__MLB_SIG 0x71
- MX6QDL_PAD_GPIO_2__MLB_DATA 0x71
- >;
- };
- };
-
- pwm0 {
- pinctrl_pwm0_1: pwm0grp-1 {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
- >;
- };
- };
-
- pwm3 {
- pinctrl_pwm3_1: pwm3grp-1 {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
- >;
- };
- };
-
- spdif {
- pinctrl_spdif_1: spdifgrp-1 {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
- >;
- };
-
- pinctrl_spdif_2: spdifgrp-2 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
- MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
- >;
- };
-
- pinctrl_spdif_3: spdifgrp-3 {
- fsl,pins = <
- MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
- };
-
- uart2 {
- pinctrl_uart2_1: uart2grp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_uart2_2: uart2grp-2 { /* DTE mode */
- fsl,pins = <
- MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
- MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
- >;
- };
- };
-
- uart3 {
- pinctrl_uart3_1: uart3grp-1 {
- fsl,pins = <
- MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
- MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
- >;
- };
-
- pinctrl_uart3_2: uart3grp-2 {
- fsl,pins = <
- MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
- MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
- >;
- };
- };
-
- uart4 {
- pinctrl_uart4_1: uart4grp-1 {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
- >;
- };
- };
-
- usbotg {
- pinctrl_usbotg_1: usbotggrp-1 {
- fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
- >;
- };
-
- pinctrl_usbotg_2: usbotggrp-2 {
- fsl,pins = <
- MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
- >;
- };
- };
-
- usbh2 {
- pinctrl_usbh2_1: usbh2grp-1 {
- fsl,pins = <
- MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x40013030
- MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40013030
- >;
- };
-
- pinctrl_usbh2_2: usbh2grp-2 {
- fsl,pins = <
- MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40017030
- >;
- };
- };
-
- usbh3 {
- pinctrl_usbh3_1: usbh3grp-1 {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x40013030
- MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x40013030
- >;
- };
-
- pinctrl_usbh3_2: usbh3grp-2 {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x40017030
- >;
- };
- };
-
- usdhc1 {
- pinctrl_usdhc1_1: usdhc1grp-1 {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
- MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059
- MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059
- MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059
- MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc1_2: usdhc1grp-2 {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
- >;
- };
- };
-
- usdhc2 {
- pinctrl_usdhc2_1: usdhc2grp-1 {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
- MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
- MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
- MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc2_2: usdhc2grp-2 {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- >;
- };
- };
-
- usdhc3 {
- pinctrl_usdhc3_1: usdhc3grp-1 {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
- >;
- };
-
- pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
- >;
- };
-
- pinctrl_usdhc3_2: usdhc3grp-2 {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- >;
- };
- };
-
- usdhc4 {
- pinctrl_usdhc4_1: usdhc4grp-1 {
- fsl,pins = <
- MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
- MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
- MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
- MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
- MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
- MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
- MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
- MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
- MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
- MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc4_2: usdhc4grp-2 {
- fsl,pins = <
- MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
- MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
- MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
- MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
- MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
- MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
- >;
- };
- };
-
- weim {
- pinctrl_weim_cs0_1: weim_cs0grp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
- >;
- };
-
- pinctrl_weim_nor_1: weim_norgrp-1 {
- fsl,pins = <
- MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
- MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
- MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
- /* data */
- MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
- MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
- MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
- MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
- MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
- MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
- MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
- MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
- MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
- MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
- MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
- MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
- MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
- MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
- MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
- MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
- /* address */
- MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
- MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
- MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
- MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
- MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
- MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
- MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
- MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
- MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
- MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
- MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
- MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
- MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
- MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
- MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
- MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
- MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
- MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
- MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
- MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
- MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
- MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
- MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
- MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
- >;
- };
- };
};
ldb: ldb@020e0008 {
@@ -1370,18 +676,18 @@
dcic1: dcic@020e4000 {
reg = <0x020e4000 0x4000>;
- interrupts = <0 124 0x04>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
};
dcic2: dcic@020e8000 {
reg = <0x020e8000 0x4000>;
- interrupts = <0 125 0x04>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
};
sdma: sdma@020ec000 {
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
- interrupts = <0 2 0x04>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 155>, <&clks 155>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
@@ -1398,7 +704,8 @@
caam@02100000 {
reg = <0x02100000 0x40000>;
- interrupts = <0 105 0x04 0 106 0x04>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>;
};
aipstz@0217c000 { /* AIPSTZ2 */
@@ -1408,7 +715,7 @@
usbotg: usb@02184000 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
- interrupts = <0 43 0x04>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 162>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
@@ -1418,7 +725,7 @@
usbh1: usb@02184200 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
- interrupts = <0 40 0x04>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 162>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
@@ -1428,7 +735,7 @@
usbh2: usb@02184400 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
- interrupts = <0 41 0x04>;
+ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 162>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
@@ -1437,7 +744,7 @@
usbh3: usb@02184600 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
- interrupts = <0 42 0x04>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 162>;
fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
@@ -1453,7 +760,9 @@
fec: ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
- interrupts = <0 118 0x04 0 119 0x04>;
+ interrupts-extended =
+ <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 117>, <&clks 117>, <&clks 190>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
@@ -1461,13 +770,15 @@
mlb@0218c000 {
reg = <0x0218c000 0x4000>;
- interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+ interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
+ <0 117 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>;
};
usdhc1: usdhc@02190000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
- interrupts = <0 22 0x04>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 163>, <&clks 163>, <&clks 163>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -1477,7 +788,7 @@
usdhc2: usdhc@02194000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
- interrupts = <0 23 0x04>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 164>, <&clks 164>, <&clks 164>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -1487,7 +798,7 @@
usdhc3: usdhc@02198000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
- interrupts = <0 24 0x04>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 165>, <&clks 165>, <&clks 165>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -1497,7 +808,7 @@
usdhc4: usdhc@0219c000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
- interrupts = <0 25 0x04>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 166>, <&clks 166>, <&clks 166>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@@ -1509,7 +820,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
- interrupts = <0 36 0x04>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 125>;
status = "disabled";
};
@@ -1519,7 +830,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
- interrupts = <0 37 0x04>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 126>;
status = "disabled";
};
@@ -1529,7 +840,7 @@
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
- interrupts = <0 38 0x04>;
+ interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 127>;
status = "disabled";
};
@@ -1550,7 +861,7 @@
weim: weim@021b8000 {
compatible = "fsl,imx6q-weim";
reg = <0x021b8000 0x4000>;
- interrupts = <0 14 0x04>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 196>;
};
@@ -1561,12 +872,12 @@
tzasc@021d0000 { /* TZASC1 */
reg = <0x021d0000 0x4000>;
- interrupts = <0 108 0x04>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
};
tzasc@021d4000 { /* TZASC2 */
reg = <0x021d4000 0x4000>;
- interrupts = <0 109 0x04>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
};
audmux: audmux@021d8000 {
@@ -1575,7 +886,7 @@
status = "disabled";
};
- mipi@021dc000 { /* MIPI-CSI */
+ mipi_csi: mipi@021dc000 {
reg = <0x021dc000 0x4000>;
};
@@ -1585,13 +896,13 @@
vdoa@021e4000 {
reg = <0x021e4000 0x4000>;
- interrupts = <0 18 0x04>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
};
uart2: serial@021e8000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
- interrupts = <0 27 0x04>;
+ interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
@@ -1602,7 +913,7 @@
uart3: serial@021ec000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
- interrupts = <0 28 0x04>;
+ interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
@@ -1613,7 +924,7 @@
uart4: serial@021f0000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
- interrupts = <0 29 0x04>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
@@ -1624,7 +935,7 @@
uart5: serial@021f4000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
- interrupts = <0 30 0x04>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 160>, <&clks 161>;
clock-names = "ipg", "per";
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
@@ -1637,7 +948,8 @@
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";
reg = <0x02400000 0x400000>;
- interrupts = <0 6 0x4 0 5 0x4>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 130>, <&clks 131>, <&clks 132>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index cc68e19..864d8df 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -8,6 +8,8 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include "imx6sl.dtsi"
/ {
@@ -18,11 +20,26 @@
reg = <0x80000000 0x40000000>;
};
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb_otg1_vbus: usb_otg1_vbus {
+ reg_usb_otg1_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -30,22 +47,63 @@
enable-active-high;
};
- reg_usb_otg2_vbus: usb_otg2_vbus {
+ reg_usb_otg2_vbus: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 2 0>;
enable-active-high;
};
+
+ reg_aud3v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "wm8962-supply-3v15";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-boot-on;
+ };
+
+ reg_aud4v: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "wm8962-supply-4v2";
+ regulator-min-microvolt = <4325000>;
+ regulator-max-microvolt = <4325000>;
+ regulator-boot-on;
+ };
};
+
+ sound {
+ compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux3>;
+ status = "okay";
};
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 11 0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
flash: m25p80@0 {
@@ -59,16 +117,144 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
status = "okay";
};
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+ DCVDD-supply = <&vgen3_reg>;
+ DBVDD-supply = <®_aud3v>;
+ AVDD-supply = <&vgen3_reg>;
+ CPVDD-supply = <&vgen3_reg>;
+ MICVDD-supply = <®_aud3v>;
+ PLLVDD-supply = <&vgen3_reg>;
+ SPKVDD1-supply = <®_aud4v>;
+ SPKVDD2-supply = <®_aud4v>;
+ };
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx6sl-evk {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
@@ -78,21 +264,230 @@
MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
+ MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+ >;
+ };
+
+ pinctrl_audmux3: audmux3grp {
+ fsl,pins = <
+ MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
+ MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
+ MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
+ MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
+ MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
+ MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0
+ MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0
+ MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0
+ MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0
+ MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0
+ MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0
+ MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0
+ MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0
+ MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+ >;
+ };
+
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010
+ MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010
+ MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0
+ MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0
+ MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0
+ MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
>;
};
};
};
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp>;
+ linux,keymap = <
+ MATRIX_KEY(0x0, 0x0, KEY_UP) /* ROW0, COL0 */
+ MATRIX_KEY(0x0, 0x1, KEY_DOWN) /* ROW0, COL1 */
+ MATRIX_KEY(0x0, 0x2, KEY_ENTER) /* ROW0, COL2 */
+ MATRIX_KEY(0x1, 0x0, KEY_HOME) /* ROW1, COL0 */
+ MATRIX_KEY(0x1, 0x1, KEY_RIGHT) /* ROW1, COL1 */
+ MATRIX_KEY(0x1, 0x2, KEY_LEFT) /* ROW1, COL2 */
+ MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+ MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP) /* ROW2, COL1 */
+ >;
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&usbotg1 {
vbus-supply = <®_usb_otg1_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg1_1>;
+ pinctrl-0 = <&pinctrl_usbotg1>;
disable-over-current;
status = "okay";
};
@@ -106,9 +501,9 @@
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1_1>;
- pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
cd-gpios = <&gpio4 7 0>;
wp-gpios = <&gpio4 6 0>;
@@ -117,9 +512,9 @@
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2_1>;
- pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
cd-gpios = <&gpio5 0 0>;
wp-gpios = <&gpio4 29 0>;
status = "okay";
@@ -127,9 +522,9 @@
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3_1>;
- pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
cd-gpios = <&gpio3 22 0>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 28558f1..3cb4941 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -7,6 +7,7 @@
*
*/
+#include <dt-bindings/interrupt-controller/irq.h>
#include "skeleton.dtsi"
#include "imx6sl-pinfunc.h"
#include <dt-bindings/clock/imx6sl-clock.h>
@@ -27,6 +28,8 @@
spi1 = &ecspi2;
spi2 = &ecspi3;
spi3 = &ecspi4;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
};
cpus {
@@ -38,6 +41,27 @@
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1275000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1225000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
+ <&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
+ <&clks IMX6SL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
};
@@ -73,10 +97,16 @@
interrupt-parent = <&intc>;
ranges;
+ ocram: sram@00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ clocks = <&clks IMX6SL_CLK_OCRAM>;
+ };
+
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
- interrupts = <0 92 0x04>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
arm,tag-latency = <4 2 3>;
@@ -85,7 +115,7 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 0x04>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
aips1: aips-bus@02000000 {
@@ -104,7 +134,7 @@
spdif: spdif@02004000 {
reg = <0x02004000 0x4000>;
- interrupts = <0 52 0x04>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
};
ecspi1: ecspi@02008000 {
@@ -112,7 +142,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
- interrupts = <0 31 0x04>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI1>,
<&clks IMX6SL_CLK_ECSPI1>;
clock-names = "ipg", "per";
@@ -124,7 +154,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
- interrupts = <0 32 0x04>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI2>,
<&clks IMX6SL_CLK_ECSPI2>;
clock-names = "ipg", "per";
@@ -136,7 +166,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
- interrupts = <0 33 0x04>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI3>,
<&clks IMX6SL_CLK_ECSPI3>;
clock-names = "ipg", "per";
@@ -148,7 +178,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
- interrupts = <0 34 0x04>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI4>,
<&clks IMX6SL_CLK_ECSPI4>;
clock-names = "ipg", "per";
@@ -159,7 +189,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02018000 0x4000>;
- interrupts = <0 30 0x04>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -172,7 +202,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
- interrupts = <0 26 0x04>;
+ interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -185,7 +215,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02024000 0x4000>;
- interrupts = <0 27 0x04>;
+ interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -195,9 +225,11 @@
};
ssi1: ssi@02028000 {
- compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
+ compatible = "fsl,imx6sl-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
- interrupts = <0 46 0x04>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI1>;
dmas = <&sdma 37 1 0>,
<&sdma 38 1 0>;
@@ -207,9 +239,11 @@
};
ssi2: ssi@0202c000 {
- compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
+ compatible = "fsl,imx6sl-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
- interrupts = <0 47 0x04>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI2>;
dmas = <&sdma 41 1 0>,
<&sdma 42 1 0>;
@@ -219,9 +253,11 @@
};
ssi3: ssi@02030000 {
- compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi";
+ compatible = "fsl,imx6sl-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
- interrupts = <0 48 0x04>;
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI3>;
dmas = <&sdma 45 1 0>,
<&sdma 46 1 0>;
@@ -234,7 +270,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02034000 0x4000>;
- interrupts = <0 28 0x04>;
+ interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -247,7 +283,7 @@
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02038000 0x4000>;
- interrupts = <0 29 0x04>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
@@ -261,7 +297,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
- interrupts = <0 83 0x04>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM1>,
<&clks IMX6SL_CLK_PWM1>;
clock-names = "ipg", "per";
@@ -271,7 +307,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
- interrupts = <0 84 0x04>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM2>,
<&clks IMX6SL_CLK_PWM2>;
clock-names = "ipg", "per";
@@ -281,7 +317,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
- interrupts = <0 85 0x04>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM3>,
<&clks IMX6SL_CLK_PWM3>;
clock-names = "ipg", "per";
@@ -291,7 +327,7 @@
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
- interrupts = <0 86 0x04>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM4>,
<&clks IMX6SL_CLK_PWM4>;
clock-names = "ipg", "per";
@@ -300,7 +336,7 @@
gpt: gpt@02098000 {
compatible = "fsl,imx6sl-gpt";
reg = <0x02098000 0x4000>;
- interrupts = <0 55 0x04>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_GPT>,
<&clks IMX6SL_CLK_GPT_SERIAL>;
clock-names = "ipg", "per";
@@ -309,7 +345,8 @@
gpio1: gpio@0209c000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
- interrupts = <0 66 0x04 0 67 0x04>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+ <0 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -319,7 +356,8 @@
gpio2: gpio@020a0000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
- interrupts = <0 68 0x04 0 69 0x04>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 69 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -329,7 +367,8 @@
gpio3: gpio@020a4000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
- interrupts = <0 70 0x04 0 71 0x04>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 71 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -339,7 +378,8 @@
gpio4: gpio@020a8000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
- interrupts = <0 72 0x04 0 73 0x04>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+ <0 73 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -349,7 +389,8 @@
gpio5: gpio@020ac000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
- interrupts = <0 74 0x04 0 75 0x04>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+ <0 75 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -357,21 +398,23 @@
};
kpp: kpp@020b8000 {
+ compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
- interrupts = <0 82 0x04>;
+ interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
};
wdog1: wdog@020bc000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
- interrupts = <0 80 0x04>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
};
wdog2: wdog@020c0000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
- interrupts = <0 81 0x04>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
status = "disabled";
};
@@ -379,7 +422,8 @@
clks: ccm@020c4000 {
compatible = "fsl,imx6sl-ccm";
reg = <0x020c4000 0x4000>;
- interrupts = <0 87 0x04 0 88 0x04>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
};
@@ -388,7 +432,9 @@
"fsl,imx6q-anatop",
"syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
- interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 54 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1@110 {
compatible = "fsl,anatop-regulator";
@@ -434,7 +480,7 @@
reg_arm: regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
- regulator-name = "cpu";
+ regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
@@ -487,15 +533,17 @@
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
- interrupts = <0 44 0x04>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBPHY1>;
+ fsl,anatop = <&anatop>;
};
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
- interrupts = <0 45 0x04>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBPHY2>;
+ fsl,anatop = <&anatop>;
};
snvs@020cc000 {
@@ -507,31 +555,33 @@
snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
- interrupts = <0 19 0x04 0 20 0x04>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>;
};
};
epit1: epit@020d0000 {
reg = <0x020d0000 0x4000>;
- interrupts = <0 56 0x04>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
};
epit2: epit@020d4000 {
reg = <0x020d4000 0x4000>;
- interrupts = <0 57 0x04>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
src: src@020d8000 {
compatible = "fsl,imx6sl-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
- interrupts = <0 91 0x04 0 96 0x04>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+ <0 96 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
gpc: gpc@020dc000 {
compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
- interrupts = <0 89 0x04>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
};
gpr: iomuxc-gpr@020e0000 {
@@ -543,235 +593,22 @@
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6sl-iomuxc";
reg = <0x020e0000 0x4000>;
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
- MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
- MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
- >;
- };
- };
-
- fec {
- pinctrl_fec_1: fecgrp-1 {
- fsl,pins = <
- MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0
- MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0
- MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0
- MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0
- MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0
- MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0
- MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0
- MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0
- MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
- MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
- >;
- };
- };
-
- usbotg1 {
- pinctrl_usbotg1_1: usbotg1grp-1 {
- fsl,pins = <
- MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_usbotg1_2: usbotg1grp-2 {
- fsl,pins = <
- MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_usbotg1_3: usbotg1grp-3 {
- fsl,pins = <
- MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_usbotg1_4: usbotg1grp-4 {
- fsl,pins = <
- MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_usbotg1_5: usbotg1grp-5 {
- fsl,pins = <
- MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059
- >;
- };
- };
-
- usbotg2 {
- pinctrl_usbotg2_1: usbotg2grp-1 {
- fsl,pins = <
- MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059
- >;
- };
-
- pinctrl_usbotg2_2: usbotg2grp-2 {
- fsl,pins = <
- MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059
- >;
- };
-
- pinctrl_usbotg2_3: usbotg2grp-3 {
- fsl,pins = <
- MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059
- >;
- };
-
- pinctrl_usbotg2_4: usbotg2grp-4 {
- fsl,pins = <
- MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059
- >;
- };
- };
-
- usdhc1 {
- pinctrl_usdhc1_1: usdhc1grp-1 {
- fsl,pins = <
- MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059
- MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059
- MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
- MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
- MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
- MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
- MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
- MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
- MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
- MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz {
- fsl,pins = <
- MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
- MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
- MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
- MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
- MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
- MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
- MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
- MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
- MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
- MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
- >;
- };
-
- pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz {
- fsl,pins = <
- MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
- MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
- MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
- MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
- MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
- MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
- MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
- MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
- MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
- MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
- >;
- };
-
-
- };
-
- usdhc2 {
- pinctrl_usdhc2_1: usdhc2grp-1 {
- fsl,pins = <
- MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz {
- fsl,pins = <
- MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
- MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9
- MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
- MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
- MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
- MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz {
- fsl,pins = <
- MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
- MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9
- MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
- MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
- MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
- MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
- >;
- };
-
- };
-
- usdhc3 {
- pinctrl_usdhc3_1: usdhc3grp-1 {
- fsl,pins = <
- MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
- fsl,pins = <
- MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
- MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9
- MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
- MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
- MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
- MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
- fsl,pins = <
- MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
- MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9
- MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
- MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
- MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
- MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
- >;
- };
- };
};
csi: csi@020e4000 {
reg = <0x020e4000 0x4000>;
- interrupts = <0 7 0x04>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
spdc: spdc@020e8000 {
reg = <0x020e8000 0x4000>;
- interrupts = <0 6 0x04>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
sdma: sdma@020ec000 {
compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
- interrupts = <0 2 0x04>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SDMA>,
<&clks IMX6SL_CLK_SDMA>;
clock-names = "ipg", "ahb";
@@ -782,22 +619,22 @@
pxp: pxp@020f0000 {
reg = <0x020f0000 0x4000>;
- interrupts = <0 98 0x04>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
};
epdc: epdc@020f4000 {
reg = <0x020f4000 0x4000>;
- interrupts = <0 97 0x04>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
};
lcdif: lcdif@020f8000 {
reg = <0x020f8000 0x4000>;
- interrupts = <0 39 0x04>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
};
dcp: dcp@020fc000 {
reg = <0x020fc000 0x4000>;
- interrupts = <0 99 0x04>;
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -811,7 +648,7 @@
usbotg1: usb@02184000 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
- interrupts = <0 43 0x04>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
@@ -821,7 +658,7 @@
usbotg2: usb@02184200 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
- interrupts = <0 42 0x04>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
@@ -831,7 +668,7 @@
usbh: usb@02184400 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
- interrupts = <0 40 0x04>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
@@ -847,7 +684,7 @@
fec: ethernet@02188000 {
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
reg = <0x02188000 0x4000>;
- interrupts = <0 114 0x04>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ENET_REF>,
<&clks IMX6SL_CLK_ENET_REF>;
clock-names = "ipg", "ahb";
@@ -857,7 +694,7 @@
usdhc1: usdhc@02190000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
- interrupts = <0 22 0x04>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC1>,
<&clks IMX6SL_CLK_USDHC1>,
<&clks IMX6SL_CLK_USDHC1>;
@@ -869,7 +706,7 @@
usdhc2: usdhc@02194000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
- interrupts = <0 23 0x04>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC2>,
<&clks IMX6SL_CLK_USDHC2>,
<&clks IMX6SL_CLK_USDHC2>;
@@ -881,7 +718,7 @@
usdhc3: usdhc@02198000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
- interrupts = <0 24 0x04>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC3>,
<&clks IMX6SL_CLK_USDHC3>,
<&clks IMX6SL_CLK_USDHC3>;
@@ -893,7 +730,7 @@
usdhc4: usdhc@0219c000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
- interrupts = <0 25 0x04>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC4>,
<&clks IMX6SL_CLK_USDHC4>,
<&clks IMX6SL_CLK_USDHC4>;
@@ -907,7 +744,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
- interrupts = <0 36 0x04>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_I2C1>;
status = "disabled";
};
@@ -917,7 +754,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
- interrupts = <0 37 0x04>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_I2C2>;
status = "disabled";
};
@@ -927,7 +764,7 @@
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
- interrupts = <0 38 0x04>;
+ interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_I2C3>;
status = "disabled";
};
@@ -939,12 +776,12 @@
rngb: rngb@021b4000 {
reg = <0x021b4000 0x4000>;
- interrupts = <0 5 0x04>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
};
weim: weim@021b8000 {
reg = <0x021b8000 0x4000>;
- interrupts = <0 14 0x04>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
};
ocotp: ocotp@021bc000 {
diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi
new file mode 100644
index 0000000..90774d6
--- /dev/null
+++ b/arch/arm/boot/dts/k2e-clocks.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+ mainpllclk: mainpllclk@2310110 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,main-pll-clock";
+ clocks = <&refclksys>;
+ reg = <0x02620350 4>, <0x02310110 4>;
+ reg-names = "control", "multiplier";
+ fixed-postdiv = <2>;
+ };
+
+ papllclk: papllclk@2620358 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkpass>;
+ clock-output-names = "pa-pll-clk";
+ reg = <0x02620358 4>;
+ reg-names = "control";
+ };
+
+ ddr3apllclk: ddr3apllclk@2620360 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkddr3a>;
+ clock-output-names = "ddr-3a-pll-clk";
+ reg = <0x02620360 4>;
+ reg-names = "control";
+ };
+
+ clkusb1: clkusb1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk16>;
+ clock-output-names = "usb";
+ reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkhyperlink0: clkhyperlink0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "hyperlink-0";
+ reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <5>;
+ };
+
+ clkpcie1: clkpcie1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "pcie";
+ reg = <0x0235006c 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <18>;
+ };
+
+ clkxge: clkxge {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "xge";
+ reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <29>;
+ };
+};
diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts
new file mode 100644
index 0000000..bb8faeb
--- /dev/null
+++ b/arch/arm/boot/dts/k2e-evm.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "k2e.dtsi"
+
+/ {
+ compatible = "ti,k2e-evm";
+ model = "Texas Instruments Keystone 2 Edison EVM";
+
+ soc {
+
+ clocks {
+ refclksys: refclksys {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-sys";
+ };
+
+ refclkpass: refclkpass {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-pass";
+ };
+
+ refclkddr3a: refclkddr3a {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-ddr3a";
+ };
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
new file mode 100644
index 0000000..03d0190
--- /dev/null
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison soc device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gic>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ soc {
+ /include/ "k2e-clocks.dtsi"
+
+ usb: usb@2680000 {
+ interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+ dwc3@2690000 {
+ interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ usb1_phy: usb_phy@2620750 {
+ compatible = "ti,keystone-usbphy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2620750 24>;
+ status = "disabled";
+ };
+
+ usb1: usb@25000000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x25000000 0x10000>;
+ clocks = <&clkusb1>;
+ clock-names = "usb";
+ interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ status = "disabled";
+
+ dwc3@25010000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x25010000 0x70000>;
+ interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+ usb-phy = <&usb1_phy>, <&usb1_phy>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi
new file mode 100644
index 0000000..a71aa29
--- /dev/null
+++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
@@ -0,0 +1,426 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+ armpllclk: armpllclk@2620370 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkarm>;
+ clock-output-names = "arm-pll-clk";
+ reg = <0x02620370 4>;
+ reg-names = "control";
+ };
+
+ mainpllclk: mainpllclk@2310110 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,main-pll-clock";
+ clocks = <&refclksys>;
+ reg = <0x02620350 4>, <0x02310110 4>;
+ reg-names = "control", "multiplier";
+ fixed-postdiv = <2>;
+ };
+
+ papllclk: papllclk@2620358 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkpass>;
+ clock-output-names = "pa-pll-clk";
+ reg = <0x02620358 4>;
+ reg-names = "control";
+ };
+
+ ddr3apllclk: ddr3apllclk@2620360 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkddr3a>;
+ clock-output-names = "ddr-3a-pll-clk";
+ reg = <0x02620360 4>;
+ reg-names = "control";
+ };
+
+ ddr3bpllclk: ddr3bpllclk@2620368 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclkddr3b>;
+ clock-output-names = "ddr-3b-pll-clk";
+ reg = <0x02620368 4>;
+ reg-names = "control";
+ };
+
+ clktsip: clktsip {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk16>;
+ clock-output-names = "tsip";
+ reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clksrio: clksrio {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1rstiso13>;
+ clock-output-names = "srio";
+ reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <4>;
+ };
+
+ clkhyperlink0: clkhyperlink0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "hyperlink-0";
+ reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <5>;
+ };
+
+ clkgem1: clkgem1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem1";
+ reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <9>;
+ };
+
+ clkgem2: clkgem2 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem2";
+ reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <10>;
+ };
+
+ clkgem3: clkgem3 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem3";
+ reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <11>;
+ };
+
+ clkgem4: clkgem4 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem4";
+ reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <12>;
+ };
+
+ clkgem5: clkgem5 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem5";
+ reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <13>;
+ };
+
+ clkgem6: clkgem6 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem6";
+ reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <14>;
+ };
+
+ clkgem7: clkgem7 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem7";
+ reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <15>;
+ };
+
+ clkddr31: clkddr31 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "ddr3-1";
+ reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <16>;
+ };
+
+ clktac: clktac {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tac";
+ reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <17>;
+ };
+
+ clkrac01: clkrac01 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "rac-01";
+ reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <17>;
+ };
+
+ clkrac23: clkrac23 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "rac-23";
+ reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <18>;
+ };
+
+ clkfftc0: clkfftc0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-0";
+ reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <19>;
+ };
+
+ clkfftc1: clkfftc1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-1";
+ reg = <0x02350074 0xb00>, <0x023504c0 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <19>;
+ };
+
+ clkfftc2: clkfftc2 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-2";
+ reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <20>;
+ };
+
+ clkfftc3: clkfftc3 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-3";
+ reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <20>;
+ };
+
+ clkfftc4: clkfftc4 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-4";
+ reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <20>;
+ };
+
+ clkfftc5: clkfftc5 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-5";
+ reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <20>;
+ };
+
+ clkaif: clkaif {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "aif";
+ reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <21>;
+ };
+
+ clktcp3d0: clktcp3d0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-0";
+ reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <22>;
+ };
+
+ clktcp3d1: clktcp3d1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-1";
+ reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <22>;
+ };
+
+ clktcp3d2: clktcp3d2 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-2";
+ reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <23>;
+ };
+
+ clktcp3d3: clktcp3d3 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-3";
+ reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <23>;
+ };
+
+ clkvcp0: clkvcp0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-0";
+ reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp1: clkvcp1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-1";
+ reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp2: clkvcp2 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-2";
+ reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp3: clkvcp3 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-3";
+ reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp4: clkvcp4 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-4";
+ reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <25>;
+ };
+
+ clkvcp5: clkvcp5 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-5";
+ reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <25>;
+ };
+
+ clkvcp6: clkvcp6 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-6";
+ reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <25>;
+ };
+
+ clkvcp7: clkvcp7 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-7";
+ reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <25>;
+ };
+
+ clkbcp: clkbcp {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "bcp";
+ reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <26>;
+ };
+
+ clkdxb: clkdxb {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "dxb";
+ reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <27>;
+ };
+
+ clkhyperlink1: clkhyperlink1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "hyperlink-1";
+ reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <28>;
+ };
+
+ clkxge: clkxge {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "xge";
+ reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <29>;
+ };
+};
diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts
index eaefdfe..1a1335b 100644
--- a/arch/arm/boot/dts/k2hk-evm.dts
+++ b/arch/arm/boot/dts/k2hk-evm.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2013 Texas Instruments, Inc.
+ * Copyright 2013-2014 Texas Instruments, Inc.
*
* Keystone 2 Kepler/Hawking EVM device tree
*
@@ -10,12 +10,14 @@
/dts-v1/;
#include "keystone.dtsi"
+#include "k2hk.dtsi"
/ {
- compatible = "ti,keystone-evm";
+ compatible = "ti,k2hk-evm";
+ model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
soc {
- clock {
+ clocks {
refclksys: refclksys {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -52,6 +54,29 @@
};
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ debug1_1 {
+ label = "keystone:green:debug1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+ };
+
+ debug1_2 {
+ label = "keystone:red:debug1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+ };
+
+ debug2 {
+ label = "keystone:blue:debug2";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+ };
+
+ debug3 {
+ label = "keystone:blue:debug3";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+ };
+ };
};
&usb_phy {
@@ -61,3 +86,55 @@
&usb {
status = "okay";
};
+
+&aemif {
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <0>;
+ /* all timings in nanoseconds */
+ ti,cs-min-turnaround-ns = <12>;
+ ti,cs-read-hold-ns = <6>;
+ ti,cs-read-strobe-ns = <23>;
+ ti,cs-read-setup-ns = <9>;
+ ti,cs-write-hold-ns = <8>;
+ ti,cs-write-strobe-ns = <23>;
+ ti,cs-write-setup-ns = <8>;
+
+ nand@0,0 {
+ compatible = "ti,keystone-nand","ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x4000000
+ 1 0 0x0000100>;
+
+ ti,davinci-chipselect = <0>;
+ ti,davinci-mask-ale = <0x2000>;
+ ti,davinci-mask-cle = <0x4000>;
+ ti,davinci-mask-chipsel = <0>;
+ nand-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "params";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x7E80000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi
new file mode 100644
index 0000000..c73899c
--- /dev/null
+++ b/arch/arm/boot/dts/k2hk.dtsi
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking soc specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gic>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ soc {
+ /include/ "k2hk-clocks.dtsi"
+ };
+};
diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi
new file mode 100644
index 0000000..f584b80
--- /dev/null
+++ b/arch/arm/boot/dts/k2l-clocks.dtsi
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 lamarr SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+ armpllclk: armpllclk@2620370 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclksys>;
+ clock-output-names = "arm-pll-clk";
+ reg = <0x02620370 4>;
+ reg-names = "control";
+ };
+
+ mainpllclk: mainpllclk@2310110 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,main-pll-clock";
+ clocks = <&refclksys>;
+ reg = <0x02620350 4>, <0x02310110 4>;
+ reg-names = "control", "multiplier";
+ fixed-postdiv = <2>;
+ };
+
+ papllclk: papllclk@2620358 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclksys>;
+ clock-output-names = "pa-pll-clk";
+ reg = <0x02620358 4>;
+ reg-names = "control";
+ };
+
+ ddr3apllclk: ddr3apllclk@2620360 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,pll-clock";
+ clocks = <&refclksys>;
+ clock-output-names = "ddr-3a-pll-clk";
+ reg = <0x02620360 4>;
+ reg-names = "control";
+ };
+
+ clkdfeiqnsys: clkdfeiqnsys {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "dfe";
+ reg-names = "control", "domain";
+ reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+ domain-id = <0>;
+ };
+
+ clkpcie1: clkpcie1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk12>;
+ clock-output-names = "pcie";
+ reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <4>;
+ };
+
+ clkgem1: clkgem1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem1";
+ reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <9>;
+ };
+
+ clkgem2: clkgem2 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem2";
+ reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <10>;
+ };
+
+ clkgem3: clkgem3 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk1>;
+ clock-output-names = "gem3";
+ reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <11>;
+ };
+
+ clktac: clktac {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tac";
+ reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <17>;
+ };
+
+ clkrac: clkrac {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "rac";
+ reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <17>;
+ };
+
+ clkdfepd0: clkdfepd0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "dfe-pd0";
+ reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <18>;
+ };
+
+ clkfftc0: clkfftc0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-0";
+ reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <19>;
+ };
+
+ clkosr: clkosr {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "osr";
+ reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <21>;
+ };
+
+ clktcp3d0: clktcp3d0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-0";
+ reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <22>;
+ };
+
+ clktcp3d1: clktcp3d1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "tcp3d-1";
+ reg = <0x02350094 0xb00>, <0x02350058 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <23>;
+ };
+
+ clkvcp0: clkvcp0 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-0";
+ reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp1: clkvcp1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-1";
+ reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp2: clkvcp2 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-2";
+ reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkvcp3: clkvcp3 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "vcp-3";
+ reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <24>;
+ };
+
+ clkbcp: clkbcp {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "bcp";
+ reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <26>;
+ };
+
+ clkdfepd1: clkdfepd1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "dfe-pd1";
+ reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <27>;
+ };
+
+ clkfftc1: clkfftc1 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "fftc-1";
+ reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <28>;
+ };
+
+ clkiqnail: clkiqnail {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&chipclk13>;
+ clock-output-names = "iqn-ail";
+ reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <29>;
+ };
+
+ clkuart2: clkuart2 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "uart2";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
+ clkuart3: clkuart3 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "uart3";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts
new file mode 100644
index 0000000..ebf316a
--- /dev/null
+++ b/arch/arm/boot/dts/k2l-evm.dts
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "k2l.dtsi"
+
+/ {
+ compatible = "ti,k2l-evm";
+ model = "Texas Instruments Keystone 2 Lamarr EVM";
+
+ soc {
+ clocks {
+ refclksys: refclksys {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <122880000>;
+ clock-output-names = "refclk-sys";
+ };
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi
new file mode 100644
index 0000000..1f7f479
--- /dev/null
+++ b/arch/arm/boot/dts/k2l.dtsi
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gic>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ soc {
+
+ /include/ "k2l-clocks.dtsi"
+
+ uart2: serial@02348400 {
+ compatible = "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02348400 0x100>;
+ clocks = <&clkuart2>;
+ interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ uart3: serial@02348800 {
+ compatible = "ns16550a";
+ current-speed = <115200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ reg = <0x02348800 0x100>;
+ clocks = <&clkuart3>;
+ interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index 2363593..93f82c7 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -13,51 +13,6 @@
#size-cells = <1>;
ranges;
- mainpllclk: mainpllclk@2310110 {
- #clock-cells = <0>;
- compatible = "ti,keystone,main-pll-clock";
- clocks = <&refclksys>;
- reg = <0x02620350 4>, <0x02310110 4>;
- reg-names = "control", "multiplier";
- fixed-postdiv = <2>;
- };
-
- papllclk: papllclk@2620358 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkpass>;
- clock-output-names = "pa-pll-clk";
- reg = <0x02620358 4>;
- reg-names = "control";
- };
-
- ddr3apllclk: ddr3apllclk@2620360 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkddr3a>;
- clock-output-names = "ddr-3a-pll-clk";
- reg = <0x02620360 4>;
- reg-names = "control";
- };
-
- ddr3bpllclk: ddr3bpllclk@2620368 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkddr3b>;
- clock-output-names = "ddr-3b-pll-clk";
- reg = <0x02620368 4>;
- reg-names = "control";
- };
-
- armpllclk: armpllclk@2620370 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkarm>;
- clock-output-names = "arm-pll-clk";
- reg = <0x02620370 4>;
- reg-names = "control";
- };
-
mainmuxclk: mainmuxclk@2310108 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-mux-clock";
@@ -244,7 +199,7 @@
clock-output-names = "debugss-trc";
reg = <0x02350014 0xb00>, <0x02350000 0x400>;
reg-names = "control", "domain";
- domain-id = <0>;
+ domain-id = <1>;
};
clktetbtrc: clktetbtrc {
@@ -297,26 +252,6 @@
domain-id = <3>;
};
- clksrio: clksrio {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1rstiso13>;
- clock-output-names = "srio";
- reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
- reg-names = "control", "domain";
- domain-id = <4>;
- };
-
- clkhyperlink0: clkhyperlink0 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "hyperlink-0";
- reg = <0x02350030 0xb00>, <0x02350014 0x400>;
- reg-names = "control", "domain";
- domain-id = <5>;
- };
-
clksr: clksr {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
@@ -327,16 +262,6 @@
domain-id = <6>;
};
- clkmsmcsram: clkmsmcsram {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "msmcsram";
- reg = <0x02350038 0xb00>, <0x0235001c 0x400>;
- reg-names = "control", "domain";
- domain-id = <7>;
- };
-
clkgem0: clkgem0 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
@@ -347,76 +272,6 @@
domain-id = <8>;
};
- clkgem1: clkgem1 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem1";
- reg = <0x02350040 0xb00>, <0x02350024 0x400>;
- reg-names = "control", "domain";
- domain-id = <9>;
- };
-
- clkgem2: clkgem2 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem2";
- reg = <0x02350044 0xb00>, <0x02350028 0x400>;
- reg-names = "control", "domain";
- domain-id = <10>;
- };
-
- clkgem3: clkgem3 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem3";
- reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
- reg-names = "control", "domain";
- domain-id = <11>;
- };
-
- clkgem4: clkgem4 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem4";
- reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
- reg-names = "control", "domain";
- domain-id = <12>;
- };
-
- clkgem5: clkgem5 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem5";
- reg = <0x02350050 0xb00>, <0x02350034 0x400>;
- reg-names = "control", "domain";
- domain-id = <13>;
- };
-
- clkgem6: clkgem6 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem6";
- reg = <0x02350054 0xb00>, <0x02350038 0x400>;
- reg-names = "control", "domain";
- domain-id = <14>;
- };
-
- clkgem7: clkgem7 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem7";
- reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
- reg-names = "control", "domain";
- domain-id = <15>;
- };
-
clkddr30: clkddr30 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
@@ -427,276 +282,6 @@
domain-id = <16>;
};
- clkddr31: clkddr31 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "ddr3-1";
- reg = <0x02350060 0xb00>, <0x02350040 0x400>;
- reg-names = "control", "domain";
- domain-id = <16>;
- };
-
- clktac: clktac {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tac";
- reg = <0x02350064 0xb00>, <0x02350044 0x400>;
- reg-names = "control", "domain";
- domain-id = <17>;
- };
-
- clkrac01: clktac01 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "rac-01";
- reg = <0x02350068 0xb00>, <0x02350044 0x400>;
- reg-names = "control", "domain";
- domain-id = <17>;
- };
-
- clkrac23: clktac23 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "rac-23";
- reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
- reg-names = "control", "domain";
- domain-id = <18>;
- };
-
- clkfftc0: clkfftc0 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-0";
- reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
- reg-names = "control", "domain";
- domain-id = <19>;
- };
-
- clkfftc1: clkfftc1 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-1";
- reg = <0x02350074 0xb00>, <0x023504c0 0x400>;
- reg-names = "control", "domain";
- domain-id = <19>;
- };
-
- clkfftc2: clkfftc2 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-2";
- reg = <0x02350078 0xb00>, <0x02350050 0x400>;
- reg-names = "control", "domain";
- domain-id = <20>;
- };
-
- clkfftc3: clkfftc3 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-3";
- reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
- reg-names = "control", "domain";
- domain-id = <20>;
- };
-
- clkfftc4: clkfftc4 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-4";
- reg = <0x02350080 0xb00>, <0x02350050 0x400>;
- reg-names = "control", "domain";
- domain-id = <20>;
- };
-
- clkfftc5: clkfftc5 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-5";
- reg = <0x02350084 0xb00>, <0x02350050 0x400>;
- reg-names = "control", "domain";
- domain-id = <20>;
- };
-
- clkaif: clkaif {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "aif";
- reg = <0x02350088 0xb00>, <0x02350054 0x400>;
- reg-names = "control", "domain";
- domain-id = <21>;
- };
-
- clktcp3d0: clktcp3d0 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-0";
- reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
- reg-names = "control", "domain";
- domain-id = <22>;
- };
-
- clktcp3d1: clktcp3d1 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-1";
- reg = <0x02350090 0xb00>, <0x02350058 0x400>;
- reg-names = "control", "domain";
- domain-id = <22>;
- };
-
- clktcp3d2: clktcp3d2 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-2";
- reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
- reg-names = "control", "domain";
- domain-id = <23>;
- };
-
- clktcp3d3: clktcp3d3 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-3";
- reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
- reg-names = "control", "domain";
- domain-id = <23>;
- };
-
- clkvcp0: clkvcp0 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-0";
- reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp1: clkvcp1 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-1";
- reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp2: clkvcp2 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-2";
- reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp3: clkvcp3 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-3";
- reg = <0x0235000a8 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp4: clkvcp4 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-4";
- reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
- reg-names = "control", "domain";
- domain-id = <25>;
- };
-
- clkvcp5: clkvcp5 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-5";
- reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
- reg-names = "control", "domain";
- domain-id = <25>;
- };
-
- clkvcp6: clkvcp6 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-6";
- reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
- reg-names = "control", "domain";
- domain-id = <25>;
- };
-
- clkvcp7: clkvcp7 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-7";
- reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
- reg-names = "control", "domain";
- domain-id = <25>;
- };
-
- clkbcp: clkbcp {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "bcp";
- reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
- reg-names = "control", "domain";
- domain-id = <26>;
- };
-
- clkdxb: clkdxb {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "dxb";
- reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
- reg-names = "control", "domain";
- domain-id = <27>;
- };
-
- clkhyperlink1: clkhyperlink1 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "hyperlink-1";
- reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
- reg-names = "control", "domain";
- domain-id = <28>;
- };
-
- clkxge: clkxge {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "xge";
- reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
- reg-names = "control", "domain";
- domain-id = <29>;
- };
-
clkwdtimer0: clkwdtimer0 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
@@ -737,6 +322,16 @@
domain-id = <0>;
};
+ clktimer15: clktimer15 {
+ #clock-cells = <0>;
+ compatible = "ti,keystone,psc-clock";
+ clocks = <&clkmodrst0>;
+ clock-output-names = "timer15";
+ reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+ reg-names = "control", "domain";
+ domain-id = <0>;
+ };
+
clkuart0: clkuart0 {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index b420290..90823eb 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
@@ -24,37 +25,6 @@
reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&gic>;
-
- cpu@0 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu@1 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <1>;
- };
-
- cpu@2 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <2>;
- };
-
- cpu@3 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <3>;
- };
- };
-
gic: interrupt-controller {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
@@ -208,5 +178,75 @@
usb-phy = <&usb_phy>, <&usb_phy>;
};
};
+
+ wdt: wdt@022f0080 {
+ compatible = "ti,keystone-wdt","ti,davinci-wdt";
+ reg = <0x022f0080 0x80>;
+ clocks = <&clkwdtimer0>;
+ };
+
+ clock_event: timer@22f0000 {
+ compatible = "ti,keystone-timer";
+ reg = <0x022f0000 0x80>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clktimer15>;
+ };
+
+ gpio0: gpio@260bf00 {
+ compatible = "ti,keystone-gpio";
+ reg = <0x0260bf00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* HW Interrupts mapped to GPIO pins */
+ interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkgpio>;
+ clock-names = "gpio";
+ ti,ngpio = <32>;
+ ti,davinci-gpio-unbanked = <32>;
+ };
+
+ aemif: aemif@21000A00 {
+ compatible = "ti,keystone-aemif", "ti,davinci-aemif";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&clkaemif>;
+ clock-names = "aemif";
+ clock-ranges;
+
+ reg = <0x21000A00 0x00000100>;
+ ranges = <0 0 0x30000000 0x10000000
+ 1 0 0x21000A00 0x00000100>;
+ };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index dc86429..2cb0dc5 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -122,4 +122,66 @@
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
};
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð0>;
+ dsa,mii-bus = <ðphy0>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0>; /* MDIO address 0, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@ff {
+ reg = <0xff>; /* No phy attached */
+ speed = <1000>;
+ duplex = <1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
};
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 60c605d..85b1fb0 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -99,6 +99,7 @@
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp2: mcbsp@48076000 {
@@ -112,6 +113,7 @@
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
+ status = "disabled";
};
msdi1: mmc@4809c000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index d624345..9d2f028 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -113,6 +113,7 @@
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp2: mcbsp@48076000 {
@@ -128,6 +129,7 @@
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp3: mcbsp@4808c000 {
@@ -143,6 +145,7 @@
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp4: mcbsp@4808e000 {
@@ -158,6 +161,7 @@
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp5: mcbsp@48096000 {
@@ -173,6 +177,7 @@
dmas = <&sdma 21>,
<&sdma 22>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mmc1: mmc@4809c000 {
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 447e714..cba3570 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -234,3 +234,7 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
+
+&mcbsp2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 5053766d..d01e9a7 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -211,3 +211,7 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
+
+&mcbsp2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
new file mode 100644
index 0000000..d00502f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -0,0 +1,136 @@
+/*
+ * Support for CompuLab CM-T3517
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+ model = "CompuLab CM-T3517";
+ compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+ vmmc: regulator-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ wl12xx_vmmc2: wl12xx_vmmc2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vw1271";
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &wl12xx_wkup_pins
+ &wl12xx_core_pins
+ >;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
+ startup-delay-us = <20000>;
+ enable-active-high;
+ };
+
+ wl12xx_vaux2: wl12xx_vaux2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271_vaux2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&omap3_pmx_wkup {
+
+ wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4) /* sys_boot4.gpio_6 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+
+ phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4) /* uart2_tx.gpio_146 */
+ >;
+ };
+
+ phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4) /* uart2_rx.gpio_147 */
+ >;
+ };
+
+ otg_drv_vbus: pinmux_otg_drv_vbus {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ >;
+ };
+
+ wl12xx_core_pins: pinmux_wl12xx_core_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_rts.gpio_145 */
+ >;
+ };
+
+ usb_hub_pins: pinmux_usb_hub_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_clkx.gpio_152 - USB HUB RST */
+ >;
+ };
+};
+
+&hsusb1_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&phy1_reset_pins>;
+ reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&phy2_reset_pins>;
+ reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
+};
+
+&davinci_emac {
+ status = "okay";
+};
+
+&davinci_mdio {
+ status = "okay";
+};
+
+&am35x_otg_hs {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_drv_vbus>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&wl12xx_vmmc2>;
+ vmmc_aux-supply = <&wl12xx_vaux2>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
new file mode 100644
index 0000000..9faf1cd
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
@@ -0,0 +1,12 @@
+/*
+ * Support for CompuLab CM-T3530
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+ model = "CompuLab CM-T3530";
+ compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 486f4d6..b3f9a50 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -32,57 +32,26 @@
};
&omap3_pmx_core {
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- >;
- };
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
- >;
- };
-
- smsc1_pins: pinmux_smsc1_pins {
- pinctrl-single,pins = <
- 0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
- 0x16a (PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0xb2 (PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
- 0x134 (PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */
>;
};
};
-&mmc1 {
- vmmc-supply = <&vmmc1>;
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
-};
-
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
@@ -92,13 +61,3 @@
bus-width = <4>;
cap-power-off-card;
};
-
-&smsc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&smsc1_pins>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
-};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
new file mode 100644
index 0000000..c671a22
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Common support for CompuLab CM-T3x CoMs
+ */
+
+/ {
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&green_led_pins>;
+ ledb {
+ label = "cm-t3x:green";
+ gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ /* HS USB Port 1 Power */
+ hsusb1_power: hsusb1_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&hsusb1_power>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&hsusb2_power>;
+ };
+};
+
+&omap3_pmx_core {
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ green_led_pins: pinmux_green_led_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */
+ >;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <4>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
+&usbhshost {
+ port1-mode = "ehci-phy";
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy &hsusb2_phy>;
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index 3a9f004..d000558 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -1,28 +1,16 @@
/*
- * Common support for CompuLab CM-T3530 and CM-T3730
+ * Common support for CompuLab CM-T3x30 CoMs
*/
-/ {
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
- };
+#include "omap3-cm-t3x.dtsi"
+/ {
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
- leds {
- compatible = "gpio-leds";
- ledb {
- label = "cm-t35:green";
- gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
- linux,default-trigger = "heartbeat";
- };
- };
-
vddvario: regulator-vddvario {
compatible = "regulator-fixed";
regulator-name = "vddvario";
@@ -36,11 +24,40 @@
};
};
+&omap3_pmx_core {
+
+ smsc1_pins: pinmux_smsc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
+ >;
+ };
+
+ hsusb0_pins: pinmux_hsusb0_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ >;
+ };
+};
+
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>;
smsc1: ethernet@5,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc1_pins>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
reg = <5 0 0xff>;
@@ -74,8 +91,6 @@
};
&i2c1 {
- clock-frequency = <400000>;
-
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
@@ -86,10 +101,31 @@
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
-&i2c3 {
- clock-frequency = <400000>;
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
};
&twl_gpio {
ti,use-leds;
+ /* pullups: BIT(0) */
+ ti,pullups = <0x000001>;
+};
+
+&hsusb1_phy {
+ reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+ reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb0_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 4665421..bf5a515 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -101,20 +101,8 @@
status = "disabled";
};
-&mcbsp1 {
- status = "disabled";
-};
-
-&mcbsp3 {
- status = "disabled";
-};
-
-&mcbsp4 {
- status = "disabled";
-};
-
-&mcbsp5 {
- status = "disabled";
+&mcbsp2 {
+ status = "okay";
};
&gpmc {
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index b9b55c9..3ad9fdd 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -36,6 +36,14 @@
gpio-key,wakeup;
};
};
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "gta04";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
};
&omap3_pmx_core {
@@ -80,6 +88,12 @@
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
};
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
};
#include "twl4030.dtsi"
@@ -94,6 +108,14 @@
reg = <0x77>;
};
+ /* accelerometer */
+ bma180@41 {
+ compatible = "bosch,bma180";
+ reg = <0x41>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
/* leds */
tca6507@45 {
compatible = "ti,tca6507";
@@ -122,6 +144,22 @@
reg = <0x4>;
};
};
+
+ /* compass aka magnetometer */
+ hmc5843@1e {
+ compatible = "honeywell,hmc5843";
+ reg = <0x1e>;
+ };
+
+ /* touchscreen */
+ tsc2007@48 {
+ compatible = "ti,tsc2007";
+ reg = <0x48>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+ ti,x-plate-ohms = <600>;
+ };
};
&i2c3 {
@@ -146,7 +184,9 @@
};
&mmc2 {
- status = "disabled";
+ vmmc-supply = <&vaux4>;
+ bus-width = <4>;
+ ti,non-removable;
};
&mmc3 {
@@ -168,3 +208,12 @@
pinctrl-0 = <&uart3_pins>;
};
+&charger {
+ bb_uvolt = <3200000>;
+ bb_uamp = <150>;
+};
+
+&vaux4 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index c1700932..b97736d 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -170,6 +170,7 @@
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
};
&mmc1 {
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
new file mode 100644
index 0000000..6369d9f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -0,0 +1,459 @@
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+ model = "INCOstartec LILLY-A83X module (DM3730)";
+ compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+
+ chosen {
+ bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "lilly-a83x::led1";
+ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "lilly-a83x";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
+
+ reg_vcc3: vcc3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_vcc3>;
+ };
+};
+
+&omap3_pmx_wkup {
+ pinctrl-names = "default";
+
+ lan9221_pins: pinmux_lan9221_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
+ >;
+ };
+
+ tsc2048_pins: pinmux_tsc2048_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */
+ >;
+ };
+
+ mmc1cd_pins: pinmux_mmc1cd_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */
+ >;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+
+ hsusb1_pins: pinmux_hsusb1_pins {
+ pinctrl-single,pins = <
+
+ /* GPIO 182 controls USB-Hub reset. But USB-Phy its
+ * reset can't be controlled. So we clamp this GPIO to
+ * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
+ */
+
+ OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
+ >;
+ };
+
+ hsusb_otg_pins: pinmux_hsusb_otg_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ spi2_pins: pinmux_spi2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb1_2_pins
+ >;
+
+ hsusb1_2_pins: pinmux_hsusb1_2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
+ OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
+ >;
+ };
+
+ gpio1_pins: pinmux_gpio1_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */
+ >;
+ };
+
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_pins>;
+};
+
+&gpio6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_pins>;
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+ vmmc1: regulator-vmmc1 {
+ regulator-always-on;
+ };
+
+ vdd1: regulator-vdd1 {
+ regulator-always-on;
+ };
+
+ vdd2: regulator-vdd2 {
+ regulator-always-on;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <2600000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+ clock-frequency = <2600000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ gpiom1: gpio@20 {
+ compatible = "mcp,mcp23017";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ status = "disabled";
+};
+
+&mmc1 {
+ cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+ cd-inverted;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mcspi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins>;
+
+ tsc2046@0 {
+ reg = <0>; /* CS0 */
+ compatible = "ti,tsc2046";
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 0>; /* boot6 / gpio_8 */
+ spi-max-frequency = <1000000>;
+ pendown-gpio = <&gpio1 8 0>;
+ vcc-supply = <®_vcc3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2048_pins>;
+
+ ti,x-min = <300>;
+ ti,x-max = <3000>;
+ ti,y-min = <600>;
+ ti,y-max = <3600>;
+ ti,x-plate-ohms = <80>;
+ ti,pressure-max = <255>;
+ ti,swap-xy;
+
+ linux,wakeup;
+ };
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
+&usbhshost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_2_pins>;
+ num-ports = <2>;
+ port1-mode = "ehci-phy";
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb_otg_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>,
+ <7 0 0x15000000 0x01000000>;
+
+ nand@0,0 {
+ reg = <0 0 0x1000000>;
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+ /* no elm on omap3 */
+
+ gpmc,mux-add-data = <0>;
+ gpmc,device-nand;
+ gpmc,device-width = <2>;
+ gpmc,wait-pin = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,burst-length= <4>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <100>;
+ gpmc,cs-wr-off-ns = <100>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <100>;
+ gpmc,adv-wr-off-ns = <100>;
+ gpmc,oe-on-ns = <5>;
+ gpmc,oe-off-ns = <75>;
+ gpmc,we-on-ns = <5>;
+ gpmc,we-off-ns = <75>;
+ gpmc,rd-cycle-ns = <100>;
+ gpmc,wr-cycle-ns = <100>;
+ gpmc,access-ns = <60>;
+ gpmc,page-burst-access-ns = <5>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-delay-ns = <50>;
+ gpmc,wr-data-mux-bus-ns = <75>;
+ gpmc,wr-access-ns = <155>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "MLO";
+ reg = <0 0x80000>;
+ };
+
+ partition@0x80000 {
+ label = "u-boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ partition@0x260000 {
+ label = "u-boot-environment";
+ reg = <0x260000 0x20000>;
+ };
+
+ partition@0x280000 {
+ label = "kernel";
+ reg = <0x280000 0x500000>;
+ };
+
+ partition@0x780000 {
+ label = "filesystem";
+ reg = <0x780000 0xf880000>;
+ };
+ };
+
+ ethernet@7,0 {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ bank-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <10>;
+ gpmc,cs-rd-off-ns = <60>;
+ gpmc,cs-wr-off-ns = <60>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <10>;
+ gpmc,oe-off-ns = <60>;
+ gpmc,we-on-ns = <10>;
+ gpmc,we-off-ns = <60>;
+ gpmc,rd-cycle-ns = <100>;
+ gpmc,wr-cycle-ns = <100>;
+ gpmc,access-ns = <50>;
+ gpmc,page-burst-access-ns = <5>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wr-data-mux-bus-ns = <15>;
+ gpmc,wr-access-ns = <75>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ vddvario-supply = <®_vcc3>;
+ vdd33a-supply = <®_vcc3>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 0x2>;
+ reg = <7 0 0xff>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan9221_pins>;
+ phy-mode = "mii";
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
new file mode 100644
index 0000000..834f7c6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+/dts-v1/;
+
+#include "omap3-lilly-a83x.dtsi"
+
+/ {
+ model = "INCOstartec LILLY-DBB056 (DM3730)";
+ compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+};
+
+&twl {
+ vaux2: regulator-vaux2 {
+ compatible = "ti,twl4030-vaux2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ lan9117_pins: pinmux_lan9117_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* cam_fld.gpio_98 */
+ >;
+ };
+
+ gpio4_pins: pinmux_gpio4_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* cam_xclkb.gpio_111 -> sja1000 IRQ */
+ >;
+ };
+
+ gpio5_pins: pinmux_gpio5_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcbsp1_clk.gpio_156 -> enable DSS */
+ >;
+ };
+
+ lcd_pins: pinmux_lcd_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 -> wp */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_rts_sd.gpio_164 -> cd */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio4_pins>;
+};
+
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio5_pins>;
+};
+
+&mmc2 {
+ status = "okay";
+ bus-width = <4>;
+ vmmc-supply = <&vmmc1>;
+ cd-gpios = <&gpio6 4 0>; /* gpio_164 */
+ wp-gpios = <&gpio6 3 0>; /* gpio_163 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ ti,dual-volt;
+};
+
+&mcspi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000>, /* nand assigned by COM a83x */
+ <4 0 0x20000000 0x01000000>,
+ <7 0 0x15000000 0x01000000>; /* eth assigend by COM a83x */
+
+ ethernet@4,0 {
+ compatible = "smsc,lan9117", "smsc,lan9115";
+ bank-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <10>;
+ gpmc,cs-rd-off-ns = <65>;
+ gpmc,cs-wr-off-ns = <65>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <10>;
+ gpmc,oe-off-ns = <65>;
+ gpmc,we-on-ns = <10>;
+ gpmc,we-off-ns = <65>;
+ gpmc,rd-cycle-ns = <100>;
+ gpmc,wr-cycle-ns = <100>;
+ gpmc,access-ns = <60>;
+ gpmc,page-burst-access-ns = <5>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wr-data-mux-bus-ns = <15>;
+ gpmc,wr-access-ns = <75>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+ vddvario-supply = <®_vcc3>;
+ vdd33a-supply = <®_vcc3>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <2 0x2>;
+ reg = <4 0 0xff>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan9117_pins>;
+ phy-mode = "mii";
+ smsc,force-internal-phy;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 6fc85f9..64aa416 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -74,6 +74,11 @@
};
};
+ isp1704: isp1704 {
+ compatible = "nxp,isp1704";
+ nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+ usb-phy = <&usb2_phy>;
+ };
};
&omap3_pmx_core {
@@ -254,6 +259,61 @@
};
};
+&twl_keypad {
+ linux,keymap = < 0x00000010 /* KEY_Q */
+ 0x00010018 /* KEY_O */
+ 0x00020019 /* KEY_P */
+ 0x00030033 /* KEY_COMMA */
+ 0x0004000e /* KEY_BACKSPACE */
+ 0x0006001e /* KEY_A */
+ 0x0007001f /* KEY_S */
+
+ 0x01000011 /* KEY_W */
+ 0x01010020 /* KEY_D */
+ 0x01020021 /* KEY_F */
+ 0x01030022 /* KEY_G */
+ 0x01040023 /* KEY_H */
+ 0x01050024 /* KEY_J */
+ 0x01060025 /* KEY_K */
+ 0x01070026 /* KEY_L */
+
+ 0x02000012 /* KEY_E */
+ 0x02010034 /* KEY_DOT */
+ 0x02020067 /* KEY_UP */
+ 0x0203001c /* KEY_ENTER */
+ 0x0205002c /* KEY_Z */
+ 0x0206002d /* KEY_X */
+ 0x0207002e /* KEY_C */
+ 0x02080043 /* KEY_F9 */
+
+ 0x03000013 /* KEY_R */
+ 0x0301002f /* KEY_V */
+ 0x03020030 /* KEY_B */
+ 0x03030031 /* KEY_N */
+ 0x03040032 /* KEY_M */
+ 0x03050039 /* KEY_SPACE */
+ 0x03060039 /* KEY_SPACE */
+ 0x03070069 /* KEY_LEFT */
+
+ 0x04000014 /* KEY_T */
+ 0x0401006c /* KEY_DOWN */
+ 0x0402006a /* KEY_RIGHT */
+ 0x0404001d /* KEY_LEFTCTRL */
+ 0x04050064 /* KEY_RIGHTALT */
+ 0x0406002a /* KEY_LEFTSHIFT */
+ 0x04080044 /* KEY_F10 */
+
+ 0x05000015 /* KEY_Y */
+ 0x05080057 /* KEY_F11 */
+
+ 0x06000016 /* KEY_U */
+
+ 0x07000017 /* KEY_I */
+ 0x07010041 /* KEY_F7 */
+ 0x07020042 /* KEY_F8 */
+ >;
+};
+
&twl_gpio {
ti,pullups = <0x0>;
ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
@@ -291,6 +351,13 @@
DVDD-supply = <&vio>;
};
+ tsl2563: tsl2563@29 {
+ compatible = "amstaos,tsl2563";
+ reg = <0x29>;
+
+ amstaos,cover-comp-gain = <16>;
+ };
+
lp5523: lp5523@32 {
compatible = "national,lp5523";
reg = <0x32>;
@@ -356,6 +423,29 @@
compatible = "ti,bq27200";
reg = <0x55>;
};
+
+ tpa6130a2: tpa6130a2@60 {
+ compatible = "ti,tpa6130a2";
+ reg = <0x60>;
+
+ Vdd-supply = <&vmmc2>;
+
+ power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
+ };
+
+ bq24150a: bq24150a@6b {
+ compatible = "ti,bq24150a";
+ reg = <0x6b>;
+
+ ti,current-limit = <100>;
+ ti,weak-battery-voltage = <3400>;
+ ti,battery-regulation-voltage = <4200>;
+ ti,charge-current = <650>;
+ ti,termination-current = <100>;
+ ti,resistor-sense = <68>;
+
+ ti,usb-charger-detection = <&isp1704>;
+ };
};
&i2c3 {
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index a461d2f..b08142f 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -95,3 +95,7 @@
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
+
+&mcbsp2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index b9a2fed..7909c51 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -2,11 +2,36 @@
* Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
*/
+/ {
+ vddvario_sb_t35: regulator-vddvario-sb-t35 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddvario";
+ regulator-always-on;
+ };
+
+ vdd33a_sb_t35: regulator-vdd33a-sb-t35 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33a";
+ regulator-always-on;
+ };
+};
+
+&omap3_pmx_core {
+ smsc2_pins: pinmux_smsc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
+ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
+ >;
+ };
+};
+
&gpmc {
ranges = <4 0 0x2d000000 0x01000000>;
smsc2: ethernet@4,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc2_pins>;
interrupt-parent = <&gpio3>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
reg = <4 0 0xff>;
@@ -32,8 +57,8 @@
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
- vddvario-supply = <&vddvario>;
- vdd33a-supply = <&vdd33a>;
+ vddvario-supply = <&vddvario_sb_t35>;
+ vdd33a-supply = <&vdd33a_sb_t35>;
reg-io-width = <4>;
smsc,save-mac-address;
};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts
new file mode 100644
index 0000000..024c9c6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts
@@ -0,0 +1,43 @@
+/*
+ * Suppport for CompuLab SBC-T3517 with CM-T3517
+ */
+
+#include "omap3-cm-t3517.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+ model = "CompuLab SBC-T3517 with CM-T3517";
+ compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &sb_t35_usb_hub_pins
+ &usb_hub_pins
+ >;
+
+ mmc1_aux_pins: pinmux_mmc1_aux_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59 */
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
+ >;
+ };
+
+ sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
+ >;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &mmc1_pins
+ &mmc1_aux_pins
+ >;
+
+ wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
+ cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
new file mode 100644
index 0000000..bbbeea6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts
@@ -0,0 +1,36 @@
+/*
+ * Suppport for CompuLab SBC-T3530 with CM-T3530
+ */
+
+#include "omap3-cm-t3530.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+ model = "CompuLab SBC-T3530 with CM-T3530";
+ compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+ sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+ >;
+ };
+};
+
+/*
+ * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
+ * SB-T35 baseboard respectively.
+ * This setting includes both chips in SBC-T3530 board device tree.
+ */
+&gpmc {
+ ranges = <5 0 0x2c000000 0x01000000>,
+ <4 0 0x2d000000 0x01000000>;
+};
+
+&mmc1 {
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index c119bd5..08e4a70 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -10,21 +10,18 @@
compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
};
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+ sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+ >;
+ };
+};
+
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
};
-
-&smsc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&smsc2_pins>;
-};
-
-&omap3_pmx_core {
- smsc2_pins: pinmux_smsc2_pins {
- pinctrl-single,pins = <
- 0x86 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
- 0xa2 (PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
- >;
- };
-};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index a5fc83b..b91117a 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -35,6 +35,11 @@
compatible = "arm,cortex-a8";
device_type = "cpu";
reg = <0x0>;
+
+ clocks = <&dpll1_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
};
};
@@ -436,6 +441,7 @@
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp2: mcbsp@49022000 {
@@ -453,6 +459,7 @@
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp3: mcbsp@49024000 {
@@ -470,6 +477,7 @@
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp4: mcbsp@49026000 {
@@ -485,6 +493,7 @@
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp5: mcbsp@48096000 {
@@ -500,6 +509,7 @@
dmas = <&sdma 21>,
<&sdma 22>;
dma-names = "tx", "rx";
+ status = "disabled";
};
sham: sham@480c3000 {
@@ -634,14 +644,14 @@
ranges;
usbhsohci: ohci@48064400 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x48064400 0x400>;
interrupt-parent = <&intc>;
interrupts = <76>;
};
usbhsehci: ehci@48064800 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x48064800 0x400>;
interrupt-parent = <&intc>;
interrupts = <77>;
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 281914e..02f69f4 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -34,6 +34,10 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
+ /*
+ * S6-3 must be in ON position for 8 bit mode to function
+ * Else, use 4 bit mode
+ */
bus-width = <8>;
};
@@ -103,9 +107,8 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <1 0 0x08000000>;
+ ti,nand-ecc-opt = "ham1";
nand-bus-width = <8>;
-
- ti,nand-ecc-opt = "sw";
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
gpmc,cs-wr-off-ns = <36>;
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
index 02f6c7f..6f31954 100644
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -82,16 +82,16 @@
ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
};
- ssi_ssr_fck_3430es1: ssi_ssr_fck_3430es1 {
+ ssi_ssr_fck: ssi_ssr_fck_3430es1 {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
};
- ssi_sst_fck_3430es1: ssi_sst_fck_3430es1 {
+ ssi_sst_fck: ssi_sst_fck_3430es1 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
- clocks = <&ssi_ssr_fck_3430es1>;
+ clocks = <&ssi_ssr_fck>;
clock-mult = <1>;
clock-div = <2>;
};
@@ -120,7 +120,7 @@
clock-div = <1>;
};
- ssi_ick_3430es1: ssi_ick_3430es1 {
+ ssi_ick: ssi_ick_3430es1 {
#clock-cells = <0>;
compatible = "ti,omap3-no-wait-interface-clock";
clocks = <&ssi_l4_ick>;
@@ -203,6 +203,6 @@
<&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
<&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
<&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
- <&fshostusb_fck>, <&fac_ick>, <&ssi_ick_3430es1>;
+ <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
};
};
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
index 8ed475d..877318c 100644
--- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -25,16 +25,16 @@
ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
};
- ssi_ssr_fck_3430es2: ssi_ssr_fck_3430es2 {
+ ssi_ssr_fck: ssi_ssr_fck_3430es2 {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
};
- ssi_sst_fck_3430es2: ssi_sst_fck_3430es2 {
+ ssi_sst_fck: ssi_sst_fck_3430es2 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
- clocks = <&ssi_ssr_fck_3430es2>;
+ clocks = <&ssi_ssr_fck>;
clock-mult = <1>;
clock-div = <2>;
};
@@ -55,7 +55,7 @@
clock-div = <1>;
};
- ssi_ick_3430es2: ssi_ick_3430es2 {
+ ssi_ick: ssi_ick_3430es2 {
#clock-cells = <0>;
compatible = "ti,omap3-ssi-interface-clock";
clocks = <&ssi_l4_ick>;
@@ -193,6 +193,6 @@
<&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
<&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
<&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
- <&ssi_ick_3430es2>;
+ <&ssi_ick>;
};
};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 7e8dee9..ba077cd 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -39,6 +39,26 @@
clock-frequency = <48000000>;
};
+ abb_mpu_iva: regulator-abb-mpu {
+ compatible = "ti,abb-v1";
+ regulator-name = "abb_mpu_iva";
+ #address-cell = <0>;
+ #size-cells = <0>;
+ reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+ reg-names = "base-address", "int-address";
+ ti,tranxdone-status-mask = <0x4000000>;
+ clocks = <&sys_ck>;
+ ti,settling-time = <30>;
+ ti,clock-cycles = <8>;
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1012500 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1325000 0 0 0 0 0
+ 1375000 1 0 0 0 0
+ >;
+ };
+
omap3_pmx_core2: pinmux@480025a0 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025a0 0x5c>;
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
new file mode 100644
index 0000000..96f51d8
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-duovero.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "OMAP4430 Gumstix Duovero on Parlor";
+ compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+ leds {
+ compatible = "gpio-leds";
+ led0 {
+ label = "duovero:blue:led0";
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio_122 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button0@121 {
+ label = "button0";
+ linux,code = <BTN_0>;
+ gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-0 = <
+ &led_pins
+ &button_pins
+ &smsc_pins
+ >;
+
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ 0xd6 (PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */
+ >;
+ };
+
+ button_pins: pinmux_button_pins {
+ pinctrl-single,pins = <
+ 0xd4 (PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ smsc_pins: pinmux_smsc_pins {
+ pinctrl-single,pins = <
+ 0x28 (PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */
+ 0x2a (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */
+ 0x30 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */
+ >;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <100000>;
+
+ /* optional 1K EEPROM with revision information */
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ reg = <0x51>;
+ pagesize = <8>;
+ };
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+ ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
+
+ ethernet@gpmc {
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */
+
+ phy-mode = "mii";
+
+ gpmc,cs-on-ns = <10>;
+ gpmc,cs-rd-off-ns = <50>;
+ gpmc,cs-wr-off-ns = <50>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <15>;
+ gpmc,oe-off-ns = <50>;
+ gpmc,we-on-ns = <15>;
+ gpmc,we-off-ns = <50>;
+ gpmc,rd-cycle-ns = <50>;
+ gpmc,wr-cycle-ns = <50>;
+ gpmc,access-ns = <50>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,bus-turnaround-ns = <35>;
+ gpmc,cycle2cycle-delay-ns = <35>;
+ gpmc,wr-data-mux-bus-ns = <35>;
+ gpmc,wr-access-ns = <50>;
+
+ gpmc,mux-add-data = <2>;
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,clk-activation-ns = <5>;
+ gpmc,sync-clk-ps = <20000>;
+ };
+};
+
+
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
new file mode 100644
index 0000000..a5147911
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap443x.dtsi"
+
+/ {
+ model = "Gumstix Duovero";
+ compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "DuoVero";
+
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias";
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1phy_pins>;
+
+ clocks = <&auxclk3_ck>;
+ clock-names = "main_clk";
+ clock-frequency = <19200000>;
+ };
+
+ /* regulator for w2cbw0015 on sdio5 */
+ w2cbw0015_vmmc: w2cbw0015_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&w2cbw0015_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "w2cbw0015";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; /* gpio_43 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6040_pins
+ &mcpdm_pins
+ &mcbsp1_pins
+ &hsusbb1_pins
+ >;
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0x126 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */
+ 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ >;
+ };
+
+ hsusbb1_pins: pinmux_hsusbb1_pins {
+ pinctrl-single,pins = <
+ 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+ 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+ 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+ 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+ 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+ 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+ 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+ 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+ 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+ 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+ 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+ 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+ >;
+ };
+
+ hsusb1phy_pins: pinmux_hsusb1phy_pins {
+ pinctrl-single,pins = <
+ 0x4c (PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */
+ >;
+ };
+
+ w2cbw0015_pins: pinmux_w2cbw0015_pins {
+ pinctrl-single,pins = <
+ 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
+ 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c4_pins: pinmux_i2c4_pins {
+ pinctrl-single,pins = <
+ 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0xa2 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
+ 0xa4 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */
+ 0xa6 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */
+ 0xa8 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
+ 0xaa (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
+ 0xac (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
+ >;
+ };
+
+ mmc5_pins: pinmux_mmc5_pins {
+ pinctrl-single,pins = <
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */
+ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */
+ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */
+ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */
+ 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */
+ >;
+ };
+};
+
+/* PMIC */
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+ };
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+/* on-board bluetooth / WiFi module */
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+
+ vmmc-supply = <&vmmc>;
+ ti,bus-width = <4>;
+ ti,non-removable; /* FIXME: use PMIC_MMC detect */
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+/* mmc3 is available to the expansion board */
+
+&mmc4 {
+ status = "disabled";
+};
+
+/* on-board WiFi module */
+&mmc5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc5_pins>;
+
+ vmmc-supply = <&w2cbw0015_vmmc>;
+ ti,bus-width = <4>;
+ ti,non-removable;
+ cap-power-off-card;
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 88c6a05..cbc45cf 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -83,12 +83,8 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
vcc-supply = <&hsusb1_power>;
- /**
- * FIXME:
- * put the right clock phandle here when available
- * clocks = <&auxclk3>;
- * clock-names = "main_clk";
- */
+ clocks = <&auxclk3_ck>;
+ clock-names = "main_clk";
clock-frequency = <19200000>;
};
@@ -109,9 +105,6 @@
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
- &twl6040_pins
- &mcpdm_pins
- &mcbsp1_pins
&dss_dpi_pins
&tfp410_pins
&dss_hdmi_pins
@@ -300,6 +293,10 @@
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
/* IRQ# = 119 */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
@@ -380,16 +377,16 @@
device-handle = <&elpida_ECB240ABACN>;
};
-&mcbsp2 {
- status = "disabled";
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
};
-&mcbsp3 {
- status = "disabled";
-};
-
-&dmic {
- status = "disabled";
+&mcpdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
};
&twl_usb_comparator {
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index dbc81fb..9bbbbec 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -158,11 +158,6 @@
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
- &twl6040_pins
- &mcpdm_pins
- &dmic_pins
- &mcbsp1_pins
- &mcbsp2_pins
&dss_hdmi_pins
&tpd12s015_pins
>;
@@ -326,6 +321,10 @@
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
@@ -537,8 +536,28 @@
pinctrl-0 = <&uart4_pins>;
};
-&mcbsp3 {
- status = "disabled";
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
+};
+
+&dmic {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dmic_pins>;
+ status = "okay";
+};
+
+&mcpdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
};
&twl_usb_comparator {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index d3f8a6e..4e15be5 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -36,6 +36,11 @@
device_type = "cpu";
next-level-cache = <&L2>;
reg = <0x0>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
};
cpu@1 {
compatible = "arm,cortex-a9";
@@ -313,6 +318,7 @@
compatible = "ti,omap4-hwspinlock";
reg = <0x4a0f6000 0x1000>;
ti,hwmods = "spinlock";
+ #hwlock-cells = <1>;
};
i2c1: i2c@48070000 {
@@ -478,6 +484,7 @@
dmas = <&sdma 65>,
<&sdma 66>;
dma-names = "up_link", "dn_link";
+ status = "disabled";
};
dmic: dmic@4012e000 {
@@ -489,6 +496,7 @@
ti,hwmods = "dmic";
dmas = <&sdma 67>;
dma-names = "up_link";
+ status = "disabled";
};
mcbsp1: mcbsp@40122000 {
@@ -503,6 +511,7 @@
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp2: mcbsp@40124000 {
@@ -517,6 +526,7 @@
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp3: mcbsp@40126000 {
@@ -531,6 +541,7 @@
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp4: mcbsp@48096000 {
@@ -544,6 +555,7 @@
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
+ status = "disabled";
};
keypad: keypad@4a31c000 {
@@ -554,6 +566,13 @@
ti,hwmods = "kbd";
};
+ dmm@4e000000 {
+ compatible = "ti,omap4-dmm";
+ reg = <0x4e000000 0x800>;
+ interrupts = <0 113 0x4>;
+ ti,hwmods = "dmm";
+ };
+
emif1: emif@4c000000 {
compatible = "ti,emif-4d";
reg = <0x4c000000 0x100>;
@@ -699,14 +718,14 @@
ranges;
usbhsohci: ohci@4a064800 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci@4a064c00 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -757,6 +776,32 @@
dmas = <&sdma 117>, <&sdma 116>;
dma-names = "tx", "rx";
};
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ ti,tranxdone-status-mask = <0x80>;
+ clocks = <&sys_clkin_ck>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ status = "disabled";
+ };
+
+ abb_iva: regulator-abb-iva {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_iva";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ ti,tranxdone-status-mask = <0x80000000>;
+ clocks = <&sys_clkin_ck>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 8c1cfad..0adfa1d 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -43,6 +43,32 @@
#thermal-sensor-cells = <0>;
};
};
+
+ ocp {
+ abb_mpu: regulator-abb-mpu {
+ status = "okay";
+
+ reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
+ reg-names = "base-address", "int-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1313000 0 0 0 0 0
+ 1375000 1 0 0 0 0
+ 1389000 1 0 0 0 0
+ >;
+ };
+
+ /* Default unused, just provide register info for record */
+ abb_iva: regulator-abb-iva {
+ reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
+ reg-names = "base-address", "int-address";
+ };
+
+ };
+
};
/include/ "omap443x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 6b32f52..194f9ef 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -50,7 +50,44 @@
#thermal-sensor-cells = <0>;
};
+
+ abb_mpu: regulator-abb-mpu {
+ status = "okay";
+
+ reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+ <0x4A002268 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1313000 0 0 0x100000 0x40000 0
+ 1375000 1 0 0 0 0
+ 1389000 1 0 0 0 0
+ >;
+ };
+
+ abb_iva: regulator-abb-iva {
+ status = "okay";
+
+ reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+ <0x4A002268 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 950000 0 0 0 0 0
+ 1140000 0 0 0 0 0
+ 1291000 0 0 0x200000 0 0
+ 1375000 1 0 0 0 0
+ 1376000 1 0 0 0 0
+ >;
+ };
};
+
};
/include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 002fa70..3b99ec2 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -31,12 +31,8 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
- /**
- * FIXME
- * Put the right clock phandle here when available
- * clocks = <&auxclk1>;
- * clock-names = "main_clk";
- */
+ clocks = <&auxclk1_ck>;
+ clock-names = "main_clk";
clock-frequency = <19200000>;
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a72813a..859a800 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -49,6 +49,12 @@
1000000 1060000
1500000 1250000
>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
/* cooling options */
cooling-min-level = <0>;
cooling-max-level = <2>;
@@ -353,6 +359,7 @@
compatible = "ti,omap4-hwspinlock";
reg = <0x4a0f6000 0x1000>;
ti,hwmods = "spinlock";
+ #hwlock-cells = <1>;
};
mcspi1: spi@48098000 {
@@ -529,6 +536,7 @@
dmas = <&sdma 65>,
<&sdma 66>;
dma-names = "up_link", "dn_link";
+ status = "disabled";
};
dmic: dmic@4012e000 {
@@ -540,6 +548,7 @@
ti,hwmods = "dmic";
dmas = <&sdma 67>;
dma-names = "up_link";
+ status = "disabled";
};
mcbsp1: mcbsp@40122000 {
@@ -554,6 +563,7 @@
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp2: mcbsp@40124000 {
@@ -568,6 +578,7 @@
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
+ status = "disabled";
};
mcbsp3: mcbsp@40126000 {
@@ -582,6 +593,7 @@
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
+ status = "disabled";
};
timer1: timer@4ae18000 {
@@ -683,6 +695,13 @@
ti,hwmods = "wd_timer2";
};
+ dmm@4e000000 {
+ compatible = "ti,omap5-dmm";
+ reg = <0x4e000000 0x800>;
+ interrupts = <0 113 0x4>;
+ ti,hwmods = "dmm";
+ };
+
emif1: emif@4c000000 {
compatible = "ti,emif-4d5";
ti,hwmods = "emif1";
@@ -732,7 +751,8 @@
compatible = "snps,dwc3";
reg = <0x4a030000 0x10000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- usb-phy = <&usb2_phy>, <&usb3_phy>;
+ phys = <&usb2_phy>, <&usb3_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
dr_mode = "peripheral";
tx-fifo-resize;
};
@@ -749,6 +769,7 @@
compatible = "ti,omap-usb2";
reg = <0x4a084000 0x7c>;
ctrl-module = <&omap_control_usb2phy>;
+ #phy-cells = <0>;
};
usb3_phy: usb3phy@4a084400 {
@@ -758,6 +779,7 @@
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb3phy>;
+ #phy-cells = <0>;
};
};
@@ -777,14 +799,14 @@
ranges;
usbhsohci: ohci@4a064800 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci@4a064c00 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 68a72f5..169bad9 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -1,63 +1,6 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include "qcom-msm8660.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
compatible = "qcom,msm8660-surf", "qcom,msm8660";
- interrupt-parent = <&intc>;
-
- intc: interrupt-controller@2080000 {
- compatible = "qcom,msm-8660-qgic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x02080000 0x1000 >,
- < 0x02081000 0x1000 >;
- };
-
- timer@2000000 {
- compatible = "qcom,scss-timer", "qcom,msm-timer";
- interrupts = <1 0 0x301>,
- <1 1 0x301>,
- <1 2 0x301>;
- reg = <0x02000000 0x100>;
- clock-frequency = <27000000>,
- <32768>;
- cpu-offset = <0x40000>;
- };
-
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
- reg = <0x00800000 0x4000>;
- gpio-controller;
- #gpio-cells = <2>;
- ngpio = <173>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-msm8660";
- #clock-cells = <1>;
- #reset-cells = <1>;
- reg = <0x900000 0x4000>;
- };
-
- serial@19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- <0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
- clock-names = "core", "iface";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
new file mode 100644
index 0000000..c52a9e9
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -0,0 +1,87 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+
+/ {
+ model = "Qualcomm MSM8660";
+ compatible = "qcom,msm8660";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,scorpion";
+ enable-method = "qcom,gcc-msm8660";
+
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ intc: interrupt-controller@2080000 {
+ compatible = "qcom,msm-8660-qgic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02080000 0x1000 >,
+ < 0x02081000 0x1000 >;
+ };
+
+ timer@2000000 {
+ compatible = "qcom,scss-timer", "qcom,msm-timer";
+ interrupts = <1 0 0x301>,
+ <1 1 0x301>,
+ <1 2 0x301>;
+ reg = <0x02000000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x40000>;
+ };
+
+ msmgpio: gpio@800000 {
+ compatible = "qcom,msm-gpio";
+ reg = <0x00800000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpio = <173>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-msm8660";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x900000 0x4000>;
+ };
+
+ serial@19c40000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <0 195 0x0>;
+ clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7c30de4..a58fb88 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -1,70 +1,6 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include "qcom-msm8960.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
compatible = "qcom,msm8960-cdp", "qcom,msm8960";
- interrupt-parent = <&intc>;
-
- intc: interrupt-controller@2000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x02000000 0x1000 >,
- < 0x02002000 0x1000 >;
- };
-
- timer@200a000 {
- compatible = "qcom,kpss-timer", "qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>;
- reg = <0x0200a000 0x100>;
- clock-frequency = <27000000>,
- <32768>;
- cpu-offset = <0x80000>;
- };
-
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- ngpio = <150>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x800000 0x4000>;
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-msm8960";
- #clock-cells = <1>;
- #reset-cells = <1>;
- reg = <0x900000 0x4000>;
- };
-
- clock-controller@4000000 {
- compatible = "qcom,mmcc-msm8960";
- reg = <0x4000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- serial@16440000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16440000 0x1000>,
- <0x16400000 0x1000>;
- interrupts = <0 154 0x0>;
- clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
new file mode 100644
index 0000000..ecfba72
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -0,0 +1,129 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+
+/ {
+ model = "Qualcomm MSM8960";
+ compatible = "qcom,msm8960";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <1 14 0x304>;
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc0>;
+ qcom,saw = <&saw0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc1>;
+ qcom,saw = <&saw1>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ interrupts = <0 2 0x4>;
+ };
+ };
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02000000 0x1000 >,
+ < 0x02002000 0x1000 >;
+ };
+
+ timer@200a000 {
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ interrupts = <1 1 0x301>,
+ <1 2 0x301>,
+ <1 3 0x301>;
+ reg = <0x0200a000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x80000>;
+ };
+
+ msmgpio: gpio@800000 {
+ compatible = "qcom,msm-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpio = <150>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x800000 0x4000>;
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-msm8960";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x900000 0x4000>;
+ };
+
+ clock-controller@4000000 {
+ compatible = "qcom,mmcc-msm8960";
+ reg = <0x4000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ acc0: clock-controller@2088000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ };
+
+ acc1: clock-controller@2098000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ };
+
+ saw0: regulator@2089000 {
+ compatible = "qcom,saw2";
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw1: regulator@2099000 {
+ compatible = "qcom,saw2";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ serial@16440000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16440000 0x1000>,
+ <0x16400000 0x1000>;
+ interrupts = <0 154 0x0>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 9e5dadb..011eb09 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -9,6 +9,49 @@
compatible = "qcom,msm8974";
interrupt-parent = <&intc>;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <1 9 0xf04>;
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v2";
+
+ cpu@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc1>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc2>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc3>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ interrupts = <0 2 0x4>;
+ qcom,saw = <&saw_l2>;
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -91,6 +134,32 @@
};
};
+ saw_l2: regulator@f9012000 {
+ compatible = "qcom,saw2";
+ reg = <0xf9012000 0x1000>;
+ regulator;
+ };
+
+ acc0: clock-controller@f9088000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+ };
+
+ acc1: clock-controller@f9098000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+ };
+
+ acc2: clock-controller@f90a8000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+ };
+
+ acc3: clock-controller@f90b8000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+ };
+
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
@@ -117,5 +186,12 @@
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
};
+
+ rng@f9bff000 {
+ compatible = "qcom,prng";
+ reg = <0xf9bff000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
};
};
diff --git a/arch/arm/boot/dts/r7s72100-genmai-reference.dts b/arch/arm/boot/dts/r7s72100-genmai-reference.dts
index da19c70..e664611 100644
--- a/arch/arm/boot/dts/r7s72100-genmai-reference.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai-reference.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "r7s72100.dtsi"
+#include "r7s72100.dtsi"
/ {
model = "Genmai";
@@ -29,3 +29,14 @@
#size-cells = <1>;
};
};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "renesas,24c128";
+ reg = <0x50>;
+ pagesize = <64>;
+ };
+};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 46b82aa..ee70071 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -8,12 +8,26 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
compatible = "renesas,r7s72100";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -33,4 +47,137 @@
reg = <0xe8201000 0x1000>,
<0xe8202000 0x1000>;
};
+
+ i2c0: i2c@fcfee000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee000 0x44>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
+ <0 158 IRQ_TYPE_EDGE_RISING>,
+ <0 159 IRQ_TYPE_EDGE_RISING>,
+ <0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@fcfee400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee400 0x44>;
+ interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 166 IRQ_TYPE_EDGE_RISING>,
+ <0 167 IRQ_TYPE_EDGE_RISING>,
+ <0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 169 IRQ_TYPE_LEVEL_HIGH>,
+ <0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@fcfee800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee800 0x44>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
+ <0 174 IRQ_TYPE_EDGE_RISING>,
+ <0 175 IRQ_TYPE_EDGE_RISING>,
+ <0 176 IRQ_TYPE_LEVEL_HIGH>,
+ <0 177 IRQ_TYPE_LEVEL_HIGH>,
+ <0 178 IRQ_TYPE_LEVEL_HIGH>,
+ <0 179 IRQ_TYPE_LEVEL_HIGH>,
+ <0 180 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@fcfeec00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfeec00 0x44>;
+ interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
+ <0 182 IRQ_TYPE_EDGE_RISING>,
+ <0 183 IRQ_TYPE_EDGE_RISING>,
+ <0 184 IRQ_TYPE_LEVEL_HIGH>,
+ <0 185 IRQ_TYPE_LEVEL_HIGH>,
+ <0 186 IRQ_TYPE_LEVEL_HIGH>,
+ <0 187 IRQ_TYPE_LEVEL_HIGH>,
+ <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ spi0: spi@e800c800 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800c800 0x24>;
+ interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+ <0 239 IRQ_TYPE_LEVEL_HIGH>,
+ <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@e800d000 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800d000 0x24>;
+ interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
+ <0 242 IRQ_TYPE_LEVEL_HIGH>,
+ <0 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@e800d800 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800d800 0x24>;
+ interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
+ <0 245 IRQ_TYPE_LEVEL_HIGH>,
+ <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@e800e000 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800e000 0x24>;
+ interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
+ <0 248 IRQ_TYPE_LEVEL_HIGH>,
+ <0 249 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@e800e800 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800e800 0x24>;
+ interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
+ <0 251 IRQ_TYPE_LEVEL_HIGH>,
+ <0 252 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index ddb3bd7..85c5b3b 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -203,46 +203,6 @@
status = "disabled";
};
- i2c0: i2c@ffc70000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,i2c-r8a7778";
- reg = <0xffc70000 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- i2c1: i2c@ffc71000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,i2c-r8a7778";
- reg = <0xffc71000 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- i2c2: i2c@ffc72000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,i2c-r8a7778";
- reg = <0xffc72000 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- i2c3: i2c@ffc73000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,i2c-r8a7778";
- reg = <0xffc73000 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
hspi0: spi@fffc7000 {
compatible = "renesas,hspi";
reg = <0xfffc7000 0x18>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 57569cb..6e99eb2 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -1,7 +1,8 @@
/*
* Device Tree Source for the Lager board
*
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -56,6 +57,54 @@
regulator-boot-on;
regulator-always-on;
};
+
+ vcc_sdhi0: regulator@1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator@2 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi2: regulator@3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi2: regulator@4 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI2 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
@@ -63,23 +112,68 @@
};
&pfc {
- pinctrl-0 = <&scif0_pins &scif1_pins>;
+ pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>;
pinctrl-names = "default";
+ du_pins: du {
+ renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
+ renesas,function = "du";
+ };
+
scif0_pins: serial0 {
renesas,groups = "scif0_data";
renesas,function = "scif0";
};
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq0";
+ renesas,function = "intc";
+ };
+
scif1_pins: serial1 {
renesas,groups = "scif1_data";
renesas,function = "scif1";
};
+ sdhi0_pins: sd0 {
+ renesas,gpios = "sdhi0_data4", "sdhi0_ctrl";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sd2 {
+ renesas,gpios = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+
mmc1_pins: mmc1 {
renesas,groups = "mmc1_data8", "mmc1_ctrl";
renesas,function = "mmc1";
};
+
+ qspi_pins: spi {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+};
+
+ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "ok";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
};
&mmcif1 {
@@ -91,3 +185,58 @@
non-removable;
status = "okay";
};
+
+&sata1 {
+ status = "okay";
+};
+
+&spi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl512s";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash";
+ reg = <0x00440000 0x03bc0000>;
+ };
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi2>;
+ vqmmc-supply = <&vccq_sdhi2>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 71b1251..e22520d 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1,7 +1,8 @@
/*
* Device Tree Source for the r8a7790 SoC
*
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -18,6 +19,13 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -94,7 +102,6 @@
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -106,7 +113,6 @@
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -118,7 +124,6 @@
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -130,7 +135,6 @@
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -142,7 +146,6 @@
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -154,7 +157,6 @@
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -166,8 +168,8 @@
thermal@e61f0000 {
compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
- interrupt-parent = <&gic>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
};
timer {
@@ -183,7 +185,6 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupt-parent = <&gic>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
<0 1 IRQ_TYPE_LEVEL_HIGH>,
<0 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -195,7 +196,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6508000 0 0x40>;
- interrupt-parent = <&gic>;
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
status = "disabled";
@@ -206,7 +206,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6518000 0 0x40>;
- interrupt-parent = <&gic>;
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
status = "disabled";
@@ -217,7 +216,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6530000 0 0x40>;
- interrupt-parent = <&gic>;
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
status = "disabled";
@@ -228,7 +226,6 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6540000 0 0x40>;
- interrupt-parent = <&gic>;
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
status = "disabled";
@@ -237,7 +234,6 @@
mmcif0: mmcif@ee200000 {
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
- interrupt-parent = <&gic>;
interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
reg-io-width = <4>;
@@ -247,7 +243,6 @@
mmcif1: mmc@ee220000 {
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
- interrupt-parent = <&gic>;
interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
reg-io-width = <4>;
@@ -262,7 +257,6 @@
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee100000 0 0x200>;
- interrupt-parent = <&gic>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
cap-sd-highspeed;
@@ -272,7 +266,6 @@
sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee120000 0 0x200>;
- interrupt-parent = <&gic>;
interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
cap-sd-highspeed;
@@ -282,7 +275,6 @@
sdhi2: sd@ee140000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee140000 0 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
cap-sd-highspeed;
@@ -292,13 +284,129 @@
sdhi3: sd@ee160000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee160000 0 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
cap-sd-highspeed;
status = "disabled";
};
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+ reg = <0 0xe6c60000 0 64>;
+ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+ reg = <0 0xe6c20000 0 64>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+ reg = <0 0xe6c30000 0 64>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 64>;
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7790", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7790", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+ reg = <0 0xe62c0000 0 96>;
+ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+ reg = <0 0xe62c8000 0 96>;
+ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ ether: ethernet@ee700000 {
+ compatible = "renesas,ether-r8a7790";
+ reg = <0 0xee700000 0 0x400>;
+ interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ sata0: sata@ee300000 {
+ compatible = "renesas,sata-r8a7790";
+ reg = <0 0xee300000 0 0x2000>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+ status = "disabled";
+ };
+
+ sata1: sata@ee500000 {
+ compatible = "renesas,sata-r8a7790";
+ reg = <0 0xee500000 0 0x2000>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -607,10 +715,16 @@
mstp8_clks: mstp8_clks@e6150990 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&p_clk>;
+ clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>,
+ <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7790_CLK_ETHER>;
- clock-output-names = "ether";
+ renesas,clock-indices = <
+ R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
+ R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1
+ R8A7790_CLK_SATA0
+ >;
+ clock-output-names =
+ "vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
};
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -627,4 +741,15 @@
"rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0";
};
};
+
+ spi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7790", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
deleted file mode 100644
index 588ca17..0000000
--- a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Koelsch";
- compatible = "renesas,koelsch-reference", "renesas,r8a7791";
-
- chosen {
- bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x80000000>;
- };
-
- lbsc {
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- key-a {
- gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
- linux,code = <30>;
- label = "SW30";
- gpio-key,wakeup;
- debounce-interval = <20>;
- };
- key-b {
- gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
- linux,code = <48>;
- label = "SW31";
- gpio-key,wakeup;
- debounce-interval = <20>;
- };
- key-c {
- gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
- linux,code = <46>;
- label = "SW32";
- gpio-key,wakeup;
- debounce-interval = <20>;
- };
- key-d {
- gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
- linux,code = <32>;
- label = "SW33";
- gpio-key,wakeup;
- debounce-interval = <20>;
- };
- key-e {
- gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
- linux,code = <18>;
- label = "SW34";
- gpio-key,wakeup;
- debounce-interval = <20>;
- };
- key-f {
- gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
- linux,code = <33>;
- label = "SW35";
- gpio-key,wakeup;
- debounce-interval = <20>;
- };
- key-g {
- gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
- linux,code = <34>;
- label = "SW36";
- gpio-key,wakeup;
- debounce-interval = <20>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led6 {
- gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- };
- led7 {
- gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
- };
- led8 {
- gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pfc {
- pinctrl-0 = <&scif0_pins &scif1_pins>;
- pinctrl-names = "default";
-
- scif0_pins: serial0 {
- renesas,groups = "scif0_data_d";
- renesas,function = "scif0";
- };
-
- scif1_pins: serial1 {
- renesas,groups = "scif1_data_d";
- renesas,function = "scif1";
- };
-};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index fd556c3..bdd73e6 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -2,7 +2,8 @@
* Device Tree Source for the Koelsch board
*
* Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -23,7 +24,12 @@
memory@40000000 {
device_type = "memory";
- reg = <0 0x40000000 0 0x80000000>;
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ memory@200000000 {
+ device_type = "memory";
+ reg = <2 0x00000000 0 0x40000000>;
};
lbsc {
@@ -31,6 +37,60 @@
#size-cells = <1>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-a {
+ gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ linux,code = <30>;
+ label = "SW30";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-b {
+ gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+ linux,code = <48>;
+ label = "SW31";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-c {
+ gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+ linux,code = <46>;
+ label = "SW32";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-d {
+ gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+ linux,code = <32>;
+ label = "SW33";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-e {
+ gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+ linux,code = <18>;
+ label = "SW34";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-f {
+ gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+ linux,code = <33>;
+ label = "SW35";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-g {
+ gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+ linux,code = <34>;
+ label = "SW36";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
led6 {
@@ -43,16 +103,112 @@
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
};
};
+
+ vcc_sdhi0: regulator@0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator@1 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi1: regulator@2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi1: regulator@3 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi2: regulator@4 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi2: regulator@5 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI2 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
clock-frequency = <20000000>;
};
-&pfc {
- pinctrl-0 = <&scif0_pins &scif1_pins>;
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "renesas,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&pfc {
+ pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>;
+ pinctrl-names = "default";
+
+ i2c2_pins: i2c {
+ renesas,groups = "i2c2";
+ renesas,function = "i2c2";
+ };
+
+ du_pins: du {
+ renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
+ renesas,function = "du";
+ };
+
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
@@ -62,4 +218,116 @@
renesas,groups = "scif1_data_d";
renesas,function = "scif1";
};
+
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq0";
+ renesas,function = "intc";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,gpios = "sdhi0_data4", "sdhi0_ctrl";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi1_pins: sd1 {
+ renesas,gpios = "sdhi1_data4", "sdhi1_ctrl";
+ renesas,function = "sdhi1";
+ };
+
+ sdhi2_pins: sd2 {
+ renesas,gpios = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+
+ qspi_pins: spi {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+};
+
+ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "ok";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi2>;
+ vqmmc-supply = <&vccq_sdhi2>;
+ cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&spi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl512s";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "bootenv";
+ reg = <0x00080000 0x00080000>;
+ read-only;
+ };
+ partition@100000 {
+ label = "data";
+ reg = <0x00100000 0x03f00000>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 19c6550..b007f9e 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -2,7 +2,8 @@
* Device Tree Source for the r8a7791 SoC
*
* Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -19,6 +20,15 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -53,7 +63,6 @@
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -65,7 +74,6 @@
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -77,7 +85,6 @@
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -89,7 +96,6 @@
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -101,7 +107,6 @@
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -113,7 +118,6 @@
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -125,7 +129,6 @@
gpio6: gpio@e6055400 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6055400 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -137,7 +140,6 @@
gpio7: gpio@e6055800 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6055800 0 0x50>;
- interrupt-parent = <&gic>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
@@ -149,8 +151,8 @@
thermal@e61f0000 {
compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
- interrupt-parent = <&gic>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
};
timer {
@@ -166,7 +168,6 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupt-parent = <&gic>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
<0 1 IRQ_TYPE_LEVEL_HIGH>,
<0 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -179,12 +180,288 @@
<0 17 IRQ_TYPE_LEVEL_HIGH>;
};
+ i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
+ status = "disabled";
+ };
+
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7791";
reg = <0 0xe6060000 0 0x250>;
#gpio-range-cells = <3>;
};
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a7791";
+ reg = <0 0xee100000 0 0x200>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a7791";
+ reg = <0 0xee140000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a7791";
+ reg = <0 0xee160000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
+ status = "disabled";
+ };
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ reg = <0 0xe6c60000 0 64>;
+ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ reg = <0 0xe6c70000 0 64>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c78000 {
+ compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ reg = <0 0xe6c78000 0 64>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa5: serial@e6c80000 {
+ compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ reg = <0 0xe6c80000 0 64>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+ reg = <0 0xe6c20000 0 64>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+ reg = <0 0xe6c30000 0 64>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 64>;
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7791", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7791", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif2: serial@e6e58000 {
+ compatible = "renesas,scif-r8a7791", "renesas,scif";
+ reg = <0 0xe6e58000 0 64>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif3: serial@e6ea8000 {
+ compatible = "renesas,scif-r8a7791", "renesas,scif";
+ reg = <0 0xe6ea8000 0 64>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif4: serial@e6ee0000 {
+ compatible = "renesas,scif-r8a7791", "renesas,scif";
+ reg = <0 0xe6ee0000 0 64>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif5: serial@e6ee8000 {
+ compatible = "renesas,scif-r8a7791", "renesas,scif";
+ reg = <0 0xe6ee8000 0 64>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+ reg = <0 0xe62c0000 0 96>;
+ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+ reg = <0 0xe62c8000 0 96>;
+ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+ reg = <0 0xe62d0000 0 96>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ ether: ethernet@ee700000 {
+ compatible = "renesas,ether-r8a7791";
+ reg = <0 0xee700000 0 0x400>;
+ interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ sata0: sata@ee300000 {
+ compatible = "renesas,sata-r8a7791";
+ reg = <0 0xee300000 0 0x2000>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+ status = "disabled";
+ };
+
+ sata1: sata@ee500000 {
+ compatible = "renesas,sata-r8a7791";
+ reg = <0 0xee500000 0 0x2000>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -474,10 +751,15 @@
mstp8_clks: mstp8_clks@e6150990 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&p_clk>;
+ clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>,
+ <&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7791_CLK_ETHER>;
- clock-output-names = "ether";
+ renesas,clock-indices = <
+ R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
+ R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
+ >;
+ clock-output-names =
+ "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
};
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -488,7 +770,7 @@
#clock-cells = <1>;
renesas,clock-indices = <
R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD
- R8A7791_CLK_I2C4 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3
+ R8A7791_CLK_I2C5 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3
R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
>;
clock-output-names =
@@ -506,4 +788,15 @@
clock-output-names = "scifa3", "scifa4", "scifa5";
};
};
+
+ spi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 52447c1..3d5faf8 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1228,7 +1228,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
<&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index e0853ea..e41eedc 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -705,7 +705,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
- clock-names = "ssp0clk", "apb_pclk";
+ clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
<&dma 8 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -718,7 +718,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
- clock-names = "ssp1clk", "apb_pclk";
+ clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
<&dma 9 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -732,7 +732,7 @@
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
- clock-names = "spi0clk", "apb_pclk";
+ clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
<&dma 0 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -746,7 +746,7 @@
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
- clock-names = "spi1clk", "apb_pclk";
+ clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
<&dma 35 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -760,7 +760,7 @@
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
- clock-names = "spi2clk", "apb_pclk";
+ clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
<&dma 33 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -774,7 +774,7 @@
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
- clock-names = "spi3clk", "apb_pclk";
+ clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
<&dma 40 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
new file mode 100644
index 0000000..30f8601
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -0,0 +1,428 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ soc {
+ prcmu@80157000 {
+ ab8500 {
+ ab8500-gpio {
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_default_mode>,
+ <&gpio4_default_mode>,
+ <&gpio10_default_mode>,
+ <&gpio11_default_mode>,
+ <&gpio12_default_mode>,
+ <&gpio13_default_mode>,
+ <&gpio16_default_mode>,
+ <&gpio24_default_mode>,
+ <&gpio25_default_mode>,
+ <&gpio36_default_mode>,
+ <&gpio37_default_mode>,
+ <&gpio38_default_mode>,
+ <&gpio39_default_mode>,
+ <&gpio42_default_mode>,
+ <&gpio26_default_mode>,
+ <&gpio35_default_mode>,
+ <&ycbcr_default_mode>,
+ <&pwm_default_mode>,
+ <&adi1_default_mode>,
+ <&usbuicc_default_mode>,
+ <&dmic_default_mode>,
+ <&extcpena_default_mode>,
+ <&modsclsda_default_mode>;
+
+ /*
+ * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+ * are muxed in as GPIO, and configured as INPUT PULL DOWN
+ */
+ gpio2 {
+ gpio2_default_mode: gpio2_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio2_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO2_T9";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio4 {
+ gpio4_default_mode: gpio4_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio4_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO4_W2";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio10 {
+ gpio10_default_mode: gpio10_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio10_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO10_U17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio11 {
+ gpio11_default_mode: gpio11_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio11_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO11_AA18";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio12 {
+ gpio12_default_mode: gpio12_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio12_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO12_U16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio13 {
+ gpio13_default_mode: gpio13_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio13_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO13_W17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio16 {
+ gpio16_default_mode: gpio16_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio16_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO16_F15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio24 {
+ gpio24_default_mode: gpio24_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio24_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO24_T14";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio25 {
+ gpio25_default_mode: gpio25_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio25_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO25_R16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio36 {
+ gpio36_default_mode: gpio36_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio36_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO36_A17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio37 {
+ gpio37_default_mode: gpio37_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio37_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO37_E15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio38 {
+ gpio38_default_mode: gpio38_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio38_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO38_C17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio39 {
+ gpio39_default_mode: gpio39_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio39_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO39_E16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio42 {
+ gpio42_default_mode: gpio42_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio42_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO42_U2";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /*
+ * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+ */
+ gpio26 {
+ gpio26_default_mode: gpio26_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio26_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO26_M16";
+ output-low;
+ };
+ };
+ };
+ gpio35 {
+ gpio35_default_mode: gpio35_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio35_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO35_W15";
+ output-low;
+ };
+ };
+ };
+ /*
+ * This sets up the YCBCR connector pins, i.e. analog video out.
+ * Set as input with no bias.
+ */
+ ycbcr {
+ ycbcr_default_mode: ycbcr_default {
+ default_mux {
+ ste,function = "ycbcr";
+ ste,pins = "ycbcr0123_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO6_Y18",
+ "GPIO7_AA20",
+ "GPIO8_W18",
+ "GPIO9_AA19";
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
+ /* This sets up the PWM pins 14 and 15 */
+ pwm {
+ pwm_default_mode: pwm_default {
+ default_mux {
+ ste,function = "pwmout";
+ ste,pins = "pwmout1_d_1", "pwmout2_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO14_F14",
+ "GPIO15_B17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up audio interface 1 */
+ adi1 {
+ adi1_default_mode: adi1_default {
+ default_mux {
+ ste,function = "adi1";
+ ste,pins = "adi1_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO17_P5",
+ "GPIO18_R5",
+ "GPIO19_U5",
+ "GPIO20_T5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up the USB UICC pins */
+ usbuicc {
+ usbuicc_default_mode: usbuicc_default {
+ default_mux {
+ ste,function = "usbuicc";
+ ste,pins = "usbuicc_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO21_H19",
+ "GPIO22_G20",
+ "GPIO23_G19";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up the microphone pins */
+ dmic {
+ dmic_default_mode: dmic_default {
+ default_mux {
+ ste,function = "dmic";
+ ste,pins = "dmic12_d_1",
+ "dmic34_d_1",
+ "dmic56_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO27_J6",
+ "GPIO28_K6",
+ "GPIO29_G6",
+ "GPIO30_H6",
+ "GPIO31_F5",
+ "GPIO32_G5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ extcpena {
+ extcpena_default_mode: extcpena_default {
+ default_mux {
+ ste,function = "extcpena";
+ ste,pins = "extcpena_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO34_R17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* Modem I2C setup (SCL and SDA pins) */
+ modsclsda {
+ modsclsda_default_mode: modsclsda_default {
+ default_mux {
+ ste,function = "modsclsda";
+ ste,pins = "modsclsda_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO40_T19",
+ "GPIO41_U19";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /*
+ * Clock output pins associated with regulators.
+ */
+ sysclkreq2 {
+ sysclkreq2_default_mode: sysclkreq2_default {
+ default_mux {
+ ste,function = "sysclkreq";
+ ste,pins = "sysclkreq2_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO1_T10";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq2_sleep_mode: sysclkreq2_sleep {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio1_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO1_T10";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ sysclkreq4 {
+ sysclkreq4_default_mode: sysclkreq4_default {
+ default_mux {
+ ste,function = "sysclkreq";
+ ste,pins = "sysclkreq4_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO3_U9";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq4_sleep_mode: sysclkreq4_sleep {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio3_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO3_U9";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi
new file mode 100644
index 0000000..6006d62
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-ab8505.dtsi
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ soc {
+ prcmu@80157000 {
+ ab8505 {
+ ab8505-gpio {
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_default_mode>,
+ <&gpio10_default_mode>,
+ <&gpio11_default_mode>,
+ <&gpio13_default_mode>,
+ <&gpio34_default_mode>,
+ <&gpio50_default_mode>,
+ <&pwm_default_mode>,
+ <&adi2_default_mode>,
+ <&modsclsda_default_mode>,
+ <&resethw_default_mode>,
+ <&service_default_mode>;
+
+ /*
+ * Pins 2, 10, 11, 13, 34 and 50
+ * are muxed in as GPIO, and configured as INPUT PULL DOWN
+ */
+ gpio2 {
+ gpio2_default_mode: gpio2_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio2_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO2_R5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio10 {
+ gpio10_default_mode: gpio10_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio10_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO10_B16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio11 {
+ gpio11_default_mode: gpio11_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio11_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO11_B17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio13 {
+ gpio13_default_mode: gpio13_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio13_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO13_D17";
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
+ gpio34 {
+ gpio34_default_mode: gpio34_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio34_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO34_H14";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio50 {
+ gpio50_default_mode: gpio50_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio50_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO50_L4";
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
+ /* This sets up the PWM pin 14 */
+ pwm {
+ pwm_default_mode: pwm_default {
+ default_mux {
+ ste,function = "pwmout";
+ ste,pins = "pwmout1_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO14_C16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up audio interface 2 */
+ adi2 {
+ adi2_default_mode: adi2_default {
+ default_mux {
+ ste,function = "adi2";
+ ste,pins = "adi2_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO17_P2",
+ "GPIO18_N3",
+ "GPIO19_T1",
+ "GPIO20_P3";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* Modem I2C setup (SCL and SDA pins) */
+ modsclsda {
+ modsclsda_default_mode: modsclsda_default {
+ default_mux {
+ ste,function = "modsclsda";
+ ste,pins = "modsclsda_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO40_J15",
+ "GPIO41_J14";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ resethw {
+ resethw_default_mode: resethw_default {
+ default_mux {
+ ste,function = "resethw";
+ ste,pins = "resethw_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO52_D16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ service {
+ service_default_mode: service_default {
+ default_mux {
+ ste,function = "service";
+ ste,pins = "service_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO53_D15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /*
+ * Clock output pins associated with regulators.
+ */
+ sysclkreq2 {
+ sysclkreq2_default_mode: sysclkreq2_default {
+ default_mux {
+ ste,function = "sysclkreq";
+ ste,pins = "sysclkreq2_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO1_N4";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq2_sleep_mode: sysclkreq2_sleep {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio1_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO1_N4";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ sysclkreq4 {
+ sysclkreq4_default_mode: sysclkreq4_default {
+ default_mux {
+ ste,function = "sysclkreq";
+ ste,pins = "sysclkreq4_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO3_P5";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq4_sleep_mode: sysclkreq4_sleep {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio3_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO3_P5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 0c1e8d8..6cb9b68 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -188,7 +188,6 @@
msp2: msp@80117000 {
pinctrl-names = "default";
pinctrl-0 = <&msp2_default_mode>;
- status = "okay";
};
msp3: msp@80125000 {
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 40f0ecd..abc762e 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -12,6 +12,7 @@
*/
#include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-href.dtsi"
/ {
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 3b6d118..c234106 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -10,6 +10,7 @@
*/
#include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-href.dtsi"
/ {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 97d5d21..a2f632d 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
#include "ste-href-family-pinctrl.dtsi"
/ {
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index a9da480..6fe688e 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -457,7 +457,7 @@
interrupt-parent = <&vica>;
interrupts = <23>;
clocks = <&spi_clk>, <&spi_clk>;
- clock-names = "apb_pclk", "spi_clk";
+ clock-names = "SSPCLK", "apb_pclk";
dmas = <&dmac 27 &dmac 28>;
dma-names = "tx", "rx";
num-cs = <3>;
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index d4b081d..cbd2e13 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -80,18 +80,14 @@
};
};
- regulators {
- compatible = "simple-bus";
-
- reg_emac_3v3: emac-3v3 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&emac_power_pin_a1000>;
- regulator-name = "emac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pio 7 15 0>;
- };
+ reg_emac_3v3: emac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_power_pin_a1000>;
+ regulator-name = "emac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 15 0>;
};
};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 3a1595f..6692d33 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -54,16 +54,12 @@
};
};
- regulators {
- compatible = "simple-bus";
-
- reg_emac_3v3: emac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "emac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pio 7 19 0>;
- };
+ reg_emac_3v3: emac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "emac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 19 0>;
};
};
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
new file mode 100644
index 0000000..f5692a3
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+
+/ {
+ model = "LinkSprite pcDuino";
+ compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
+
+ soc@01c00000 {
+ emac: ethernet@01c0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+ };
+
+ mdio@01c0b080 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 040bb0e..a850482c 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -19,6 +19,12 @@
ethernet0 = &emac;
serial0 = &uart0;
serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial7 = &uart7;
};
cpus {
@@ -52,44 +58,48 @@
clock-frequency = <0>;
};
- osc24M: osc24M@01c20050 {
+ osc24M: clk@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-osc-clk";
+ compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
};
- osc32k: osc32k {
+ osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
+ clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
+ compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
- pll4: pll4@01c20018 {
+ pll4: clk@01c20018 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
+ compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll4";
};
- pll5: pll5@01c20020 {
+ pll5: clk@01c20020 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-pll5-clk";
+ compatible = "allwinner,sun4i-a10-pll5-clk";
reg = <0x01c20020 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll5_ddr", "pll5_other";
};
- pll6: pll6@01c20028 {
+ pll6: clk@01c20028 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-pll6-clk";
+ compatible = "allwinner,sun4i-a10-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6_sata", "pll6_other", "pll6";
@@ -98,21 +108,23 @@
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-cpu-clk";
+ compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ clock-output-names = "cpu";
};
axi: axi@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-axi-clk";
+ compatible = "allwinner,sun4i-a10-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
- axi_gates: axi_gates@01c2005c {
+ axi_gates: clk@01c2005c {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-axi-gates-clk";
+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
reg = <0x01c2005c 0x4>;
clocks = <&axi>;
clock-output-names = "axi_dram";
@@ -120,14 +132,15 @@
ahb: ahb@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-ahb-clk";
+ compatible = "allwinner,sun4i-a10-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
+ clock-output-names = "ahb";
};
- ahb_gates: ahb_gates@01c20060 {
+ ahb_gates: clk@01c20060 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-ahb-gates-clk";
+ compatible = "allwinner,sun4i-a10-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
clock-output-names = "ahb_usb0", "ahb_ehci0",
@@ -145,14 +158,15 @@
apb0: apb0@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb0-clk";
+ compatible = "allwinner,sun4i-a10-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
+ clock-output-names = "apb0";
};
- apb0_gates: apb0_gates@01c20068 {
+ apb0_gates: clk@01c20068 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-apb0-gates-clk";
+ compatible = "allwinner,sun4i-a10-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
clock-output-names = "apb0_codec", "apb0_spdif",
@@ -162,21 +176,23 @@
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb1-mux-clk";
+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1_mux";
};
apb1: apb1@01c20058 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb1-clk";
+ compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c2006c {
+ apb1_gates: clk@01c2006c {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-apb1-gates-clk";
+ compatible = "allwinner,sun4i-a10-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb1>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
@@ -189,7 +205,7 @@
nand_clk: clk@01c20080 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20080 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "nand";
@@ -197,7 +213,7 @@
ms_clk: clk@01c20084 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20084 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ms";
@@ -205,7 +221,7 @@
mmc0_clk: clk@01c20088 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc0";
@@ -213,7 +229,7 @@
mmc1_clk: clk@01c2008c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc1";
@@ -221,7 +237,7 @@
mmc2_clk: clk@01c20090 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc2";
@@ -229,7 +245,7 @@
mmc3_clk: clk@01c20094 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20094 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc3";
@@ -237,7 +253,7 @@
ts_clk: clk@01c20098 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20098 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ts";
@@ -245,7 +261,7 @@
ss_clk: clk@01c2009c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ss";
@@ -253,7 +269,7 @@
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi0";
@@ -261,7 +277,7 @@
spi1_clk: clk@01c200a4 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi1";
@@ -269,7 +285,7 @@
spi2_clk: clk@01c200a8 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a8 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi2";
@@ -277,7 +293,7 @@
pata_clk: clk@01c200ac {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200ac 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "pata";
@@ -285,7 +301,7 @@
ir0_clk: clk@01c200b0 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200b0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir0";
@@ -293,15 +309,24 @@
ir1_clk: clk@01c200b4 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200b4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir1";
};
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun4i-a10-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&pll6 1>;
+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+ };
+
spi3_clk: clk@01c200d4 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200d4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi3";
@@ -314,8 +339,30 @@
#size-cells = <1>;
ranges;
+ spi0: spi@01c05000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <10>;
+ clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@01c06000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <11>;
+ clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
@@ -323,13 +370,35 @@
};
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <12>;
+ clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi3: spi@01c1f000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c1f000 0x1000>;
+ interrupts = <50>;
+ clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index ea16054..a7198b6 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -18,6 +18,10 @@
aliases {
ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
};
cpus {
@@ -47,44 +51,48 @@
clock-frequency = <0>;
};
- osc24M: osc24M@01c20050 {
+ osc24M: clk@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-osc-clk";
+ compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
};
- osc32k: osc32k {
+ osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
+ clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
+ compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
- pll4: pll4@01c20018 {
+ pll4: clk@01c20018 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
+ compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll4";
};
- pll5: pll5@01c20020 {
+ pll5: clk@01c20020 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-pll5-clk";
+ compatible = "allwinner,sun4i-a10-pll5-clk";
reg = <0x01c20020 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll5_ddr", "pll5_other";
};
- pll6: pll6@01c20028 {
+ pll6: clk@01c20028 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-pll6-clk";
+ compatible = "allwinner,sun4i-a10-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6_sata", "pll6_other", "pll6";
@@ -93,21 +101,23 @@
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-cpu-clk";
+ compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ clock-output-names = "cpu";
};
axi: axi@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-axi-clk";
+ compatible = "allwinner,sun4i-a10-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
- axi_gates: axi_gates@01c2005c {
+ axi_gates: clk@01c2005c {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-axi-gates-clk";
+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
reg = <0x01c2005c 0x4>;
clocks = <&axi>;
clock-output-names = "axi_dram";
@@ -115,12 +125,13 @@
ahb: ahb@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-ahb-clk";
+ compatible = "allwinner,sun4i-a10-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
+ clock-output-names = "ahb";
};
- ahb_gates: ahb_gates@01c20060 {
+ ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
reg = <0x01c20060 0x8>;
@@ -136,12 +147,13 @@
apb0: apb0@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb0-clk";
+ compatible = "allwinner,sun4i-a10-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
+ clock-output-names = "apb0";
};
- apb0_gates: apb0_gates@01c20068 {
+ apb0_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
reg = <0x01c20068 0x4>;
@@ -152,19 +164,21 @@
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb1-mux-clk";
+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1_mux";
};
apb1: apb1@01c20058 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb1-clk";
+ compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c2006c {
+ apb1_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
@@ -176,7 +190,7 @@
nand_clk: clk@01c20080 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20080 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "nand";
@@ -184,7 +198,7 @@
ms_clk: clk@01c20084 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20084 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ms";
@@ -192,7 +206,7 @@
mmc0_clk: clk@01c20088 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc0";
@@ -200,7 +214,7 @@
mmc1_clk: clk@01c2008c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc1";
@@ -208,7 +222,7 @@
mmc2_clk: clk@01c20090 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc2";
@@ -216,7 +230,7 @@
ts_clk: clk@01c20098 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20098 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ts";
@@ -224,7 +238,7 @@
ss_clk: clk@01c2009c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ss";
@@ -232,7 +246,7 @@
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi0";
@@ -240,7 +254,7 @@
spi1_clk: clk@01c200a4 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi1";
@@ -248,7 +262,7 @@
spi2_clk: clk@01c200a8 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a8 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi2";
@@ -256,15 +270,24 @@
ir0_clk: clk@01c200b0 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200b0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir0";
};
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun5i-a13-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&pll6 1>;
+ clock-output-names = "usb_ohci0", "usb_phy";
+ };
+
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2015c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mbus";
@@ -277,8 +300,30 @@
#size-cells = <1>;
ranges;
+ spi0: spi@01c05000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <10>;
+ clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@01c06000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <11>;
+ clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
@@ -286,13 +331,24 @@
};
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <12>;
+ clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 320335a..cda1d4b 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -16,6 +16,11 @@
/ {
interrupt-parent = <&intc>;
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart3;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -47,44 +52,48 @@
clock-frequency = <0>;
};
- osc24M: osc24M@01c20050 {
+ osc24M: clk@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-osc-clk";
+ compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
};
- osc32k: osc32k {
+ osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
+ clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
+ compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
- pll4: pll4@01c20018 {
+ pll4: clk@01c20018 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
+ compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll4";
};
- pll5: pll5@01c20020 {
+ pll5: clk@01c20020 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-pll5-clk";
+ compatible = "allwinner,sun4i-a10-pll5-clk";
reg = <0x01c20020 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll5_ddr", "pll5_other";
};
- pll6: pll6@01c20028 {
+ pll6: clk@01c20028 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-pll6-clk";
+ compatible = "allwinner,sun4i-a10-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6_sata", "pll6_other", "pll6";
@@ -93,21 +102,23 @@
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-cpu-clk";
+ compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ clock-output-names = "cpu";
};
axi: axi@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-axi-clk";
+ compatible = "allwinner,sun4i-a10-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
- axi_gates: axi_gates@01c2005c {
+ axi_gates: clk@01c2005c {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-axi-gates-clk";
+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
reg = <0x01c2005c 0x4>;
clocks = <&axi>;
clock-output-names = "axi_dram";
@@ -115,12 +126,13 @@
ahb: ahb@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-ahb-clk";
+ compatible = "allwinner,sun4i-a10-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
+ clock-output-names = "ahb";
};
- ahb_gates: ahb_gates@01c20060 {
+ ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-ahb-gates-clk";
reg = <0x01c20060 0x8>;
@@ -135,12 +147,13 @@
apb0: apb0@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb0-clk";
+ compatible = "allwinner,sun4i-a10-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
+ clock-output-names = "apb0";
};
- apb0_gates: apb0_gates@01c20068 {
+ apb0_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-apb0-gates-clk";
reg = <0x01c20068 0x4>;
@@ -150,19 +163,21 @@
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb1-mux-clk";
+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1_mux";
};
apb1: apb1@01c20058 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb1-clk";
+ compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c2006c {
+ apb1_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
@@ -173,7 +188,7 @@
nand_clk: clk@01c20080 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20080 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "nand";
@@ -181,7 +196,7 @@
ms_clk: clk@01c20084 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20084 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ms";
@@ -189,7 +204,7 @@
mmc0_clk: clk@01c20088 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc0";
@@ -197,7 +212,7 @@
mmc1_clk: clk@01c2008c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc1";
@@ -205,7 +220,7 @@
mmc2_clk: clk@01c20090 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc2";
@@ -213,7 +228,7 @@
ts_clk: clk@01c20098 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20098 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ts";
@@ -221,7 +236,7 @@
ss_clk: clk@01c2009c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ss";
@@ -229,7 +244,7 @@
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi0";
@@ -237,7 +252,7 @@
spi1_clk: clk@01c200a4 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi1";
@@ -245,7 +260,7 @@
spi2_clk: clk@01c200a8 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a8 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi2";
@@ -253,15 +268,24 @@
ir0_clk: clk@01c200b0 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200b0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir0";
};
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun5i-a13-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&pll6 1>;
+ clock-output-names = "usb_ohci0", "usb_phy";
+ };
+
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2015c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mbus";
@@ -274,6 +298,39 @@
#size-cells = <1>;
ranges;
+ spi0: spi@01c05000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <10>;
+ clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@01c06000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <11>;
+ clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <12>;
+ clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 5256ad9..42f310a 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -16,6 +16,16 @@
/ {
interrupt-parent = <&gic>;
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ };
+
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -60,34 +70,32 @@
clock-frequency = <24000000>;
};
- osc32k: osc32k {
+ osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
+ clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- pll6: pll6 {
+ pll6: clk@01c20028 {
#clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
+ compatible = "allwinner,sun6i-a31-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6";
};
cpu: cpu@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-cpu-clk";
+ compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20050 0x4>;
/*
@@ -97,13 +105,15 @@
* Allwinner.
*/
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+ clock-output-names = "cpu";
};
axi: axi@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-axi-clk";
+ compatible = "allwinner,sun4i-a10-axi-clk";
reg = <0x01c20050 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
ahb1_mux: ahb1_mux@01c20054 {
@@ -111,16 +121,18 @@
compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+ clock-output-names = "ahb1_mux";
};
ahb1: ahb1@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-ahb-clk";
+ compatible = "allwinner,sun4i-a10-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb1_mux>;
+ clock-output-names = "ahb1";
};
- ahb1_gates: ahb1_gates@01c20060 {
+ ahb1_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
@@ -143,12 +155,13 @@
apb1: apb1@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb0-clk";
+ compatible = "allwinner,sun4i-a10-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb1>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c20060 {
+ apb1_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-apb1-gates-clk";
reg = <0x01c20068 0x4>;
@@ -160,9 +173,10 @@
apb2_mux: apb2_mux@01c20058 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb1-mux-clk";
+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+ clock-output-names = "apb2_mux";
};
apb2: apb2@01c20058 {
@@ -170,9 +184,10 @@
compatible = "allwinner,sun6i-a31-apb2-div-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb2_mux>;
+ clock-output-names = "apb2";
};
- apb2_gates: apb2_gates@01c2006c {
+ apb2_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-apb2-gates-clk";
reg = <0x01c2006c 0x4>;
@@ -182,6 +197,38 @@
"apb2_uart1", "apb2_uart2", "apb2_uart3",
"apb2_uart4", "apb2_uart5";
};
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "spi2";
+ };
+
+ spi3_clk: clk@01c200ac {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200ac 0x4>;
+ clocks = <&osc24M>, <&pll6>;
+ clock-output-names = "spi3";
+ };
};
soc@01c00000 {
@@ -312,6 +359,46 @@
status = "disabled";
};
+ spi0: spi@01c68000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c68000 0x1000>;
+ interrupts = <0 65 4>;
+ clocks = <&ahb1_gates 20>, <&spi0_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 20>;
+ status = "disabled";
+ };
+
+ spi1: spi@01c69000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c69000 0x1000>;
+ interrupts = <0 66 4>;
+ clocks = <&ahb1_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 21>;
+ status = "disabled";
+ };
+
+ spi2: spi@01c6a000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c6a000 0x1000>;
+ interrupts = <0 67 4>;
+ clocks = <&ahb1_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 22>;
+ status = "disabled";
+ };
+
+ spi3: spi@01c6b000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c6b000 0x1000>;
+ interrupts = <0 68 4>;
+ clocks = <&ahb1_gates 23>, <&spi3_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 23>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 5c51cb8..7bf4935 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -19,21 +19,6 @@
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
pinctrl@01c20800 {
led_pins_cubieboard2: led_pins@0 {
allwinner,pins = "PH20", "PH21";
@@ -60,6 +45,18 @@
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
leds {
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61..025ce52 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -51,6 +51,18 @@
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
leds {
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index ead3013..9d98316 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -18,20 +18,22 @@
model = "Olimex A20-Olinuxino Micro";
compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+ aliases {
+ spi0 = &spi1;
+ spi1 = &spi2;
+ };
+
soc@01c00000 {
- emac: ethernet@01c0b000 {
+ spi1: spi@01c06000 {
pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
+ pinctrl-0 = <&spi1_pins_a>;
status = "okay";
};
- mdio@01c0b080 {
+ spi2: spi@01c17000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
pinctrl@01c20800 {
@@ -78,6 +80,18 @@
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
leds {
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 119f066..52507e4 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -17,7 +17,15 @@
interrupt-parent = <&gic>;
aliases {
- ethernet0 = &emac;
+ ethernet0 = &gmac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial7 = &uart7;
};
cpus {
@@ -41,16 +49,25 @@
reg = <0x40000000 0x80000000>;
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- osc24M: osc24M@01c20050 {
+ osc24M: clk@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-osc-clk";
+ compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
};
osc32k: clk@0 {
@@ -60,31 +77,33 @@
clock-output-names = "osc32k";
};
- pll1: pll1@01c20000 {
+ pll1: clk@01c20000 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
+ compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll1";
};
- pll4: pll4@01c20018 {
+ pll4: clk@01c20018 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
+ compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
+ clock-output-names = "pll4";
};
- pll5: pll5@01c20020 {
+ pll5: clk@01c20020 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-pll5-clk";
+ compatible = "allwinner,sun4i-a10-pll5-clk";
reg = <0x01c20020 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll5_ddr", "pll5_other";
};
- pll6: pll6@01c20028 {
+ pll6: clk@01c20028 {
#clock-cells = <1>;
- compatible = "allwinner,sun4i-pll6-clk";
+ compatible = "allwinner,sun4i-a10-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6_sata", "pll6_other", "pll6";
@@ -92,26 +111,29 @@
cpu: cpu@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-cpu-clk";
+ compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
+ clock-output-names = "cpu";
};
axi: axi@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-axi-clk";
+ compatible = "allwinner,sun4i-a10-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
+ clock-output-names = "axi";
};
ahb: ahb@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-ahb-clk";
+ compatible = "allwinner,sun4i-a10-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
+ clock-output-names = "ahb";
};
- ahb_gates: ahb_gates@01c20060 {
+ ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-ahb-gates-clk";
reg = <0x01c20060 0x8>;
@@ -133,12 +155,13 @@
apb0: apb0@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb0-clk";
+ compatible = "allwinner,sun4i-a10-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
+ clock-output-names = "apb0";
};
- apb0_gates: apb0_gates@01c20068 {
+ apb0_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-apb0-gates-clk";
reg = <0x01c20068 0x4>;
@@ -151,19 +174,21 @@
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb1-mux-clk";
+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1_mux";
};
apb1: apb1@01c20058 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-apb1-clk";
+ compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
+ clock-output-names = "apb1";
};
- apb1_gates: apb1_gates@01c2006c {
+ apb1_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
@@ -178,7 +203,7 @@
nand_clk: clk@01c20080 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20080 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "nand";
@@ -186,7 +211,7 @@
ms_clk: clk@01c20084 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20084 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ms";
@@ -194,7 +219,7 @@
mmc0_clk: clk@01c20088 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc0";
@@ -202,7 +227,7 @@
mmc1_clk: clk@01c2008c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc1";
@@ -210,7 +235,7 @@
mmc2_clk: clk@01c20090 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc2";
@@ -218,7 +243,7 @@
mmc3_clk: clk@01c20094 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20094 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc3";
@@ -226,7 +251,7 @@
ts_clk: clk@01c20098 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20098 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ts";
@@ -234,7 +259,7 @@
ss_clk: clk@01c2009c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ss";
@@ -242,7 +267,7 @@
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi0";
@@ -250,7 +275,7 @@
spi1_clk: clk@01c200a4 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi1";
@@ -258,7 +283,7 @@
spi2_clk: clk@01c200a8 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a8 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi2";
@@ -266,7 +291,7 @@
pata_clk: clk@01c200ac {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200ac 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "pata";
@@ -274,7 +299,7 @@
ir0_clk: clk@01c200b0 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200b0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir0";
@@ -282,15 +307,24 @@
ir1_clk: clk@01c200b4 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200b4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir1";
};
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun4i-a10-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&pll6 1>;
+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+ };
+
spi3_clk: clk@01c200d4 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200d4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi3";
@@ -298,13 +332,41 @@
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2015c 0x4>;
clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
clock-output-names = "mbus";
};
/*
+ * The following two are dummy clocks, placeholders used in the gmac_tx
+ * clock. The gmac driver will choose one parent depending on the PHY
+ * interface mode, using clk_set_rate auto-reparenting.
+ * The actual TX clock rate is not controlled by the gmac_tx clock.
+ */
+ mii_phy_tx_clk: clk@2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "mii_phy_tx";
+ };
+
+ gmac_int_tx_clk: clk@3 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_int_tx";
+ };
+
+ gmac_tx_clk: clk@01c20164 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x01c20164 0x4>;
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac_tx";
+ };
+
+ /*
* Dummy clock used by output clocks
*/
osc24M_32k: clk@1 {
@@ -339,8 +401,30 @@
#size-cells = <1>;
ranges;
+ spi0: spi@01c05000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <0 10 4>;
+ clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@01c06000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <0 11 4>;
+ clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <0 55 4>;
clocks = <&ahb_gates 17>;
@@ -348,13 +432,35 @@
};
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <0 12 4>;
+ clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi3: spi@01c1f000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c1f000 0x1000>;
+ interrupts = <0 50 4>;
+ clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clock-names = "ahb", "mod";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
@@ -373,6 +479,13 @@
allwinner,pull = <0>;
};
+ uart2_pins_a: uart2@0 {
+ allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,function = "uart2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
uart6_pins_a: uart6@0 {
allwinner,pins = "PI12", "PI13";
allwinner,function = "uart6";
@@ -432,6 +545,46 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ gmac_pins_mii_a: gmac_mii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "gmac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_rgmii_a: gmac_rgmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA10",
+ "PA11", "PA12", "PA13",
+ "PA15", "PA16";
+ allwinner,function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
+
+ spi1_pins_a: spi1@0 {
+ allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,function = "spi1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ spi2_pins_a: spi2@0 {
+ allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+ allwinner,function = "spi2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
@@ -593,6 +746,21 @@
status = "disabled";
};
+ gmac: ethernet@01c50000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c50000 0x10000>;
+ interrupts = <0 85 4>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ snps,pbl = <2>;
+ snps,fixed-burst;
+ snps,force_sf_dma_mode;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
hstimer@01c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi
index 92693a8..b0ac665 100644
--- a/arch/arm/boot/dts/tps65910.dtsi
+++ b/arch/arm/boot/dts/tps65910.dtsi
@@ -82,5 +82,10 @@
reg = <12>;
regulator-compatible = "vmmc";
};
+
+ vbb_reg: regulator@13 {
+ reg = <13>;
+ regulator-compatible = "vbb";
+ };
};
};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index 4217096..86cfc7d 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -145,4 +145,11 @@
compatible = "ti,twl4030-pwrbutton";
interrupts = <8>;
};
+
+ twl_keypad: keypad {
+ compatible = "ti,twl4030-keypad";
+ interrupts = <1>;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ };
};
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
index c42e4f9..3fd1b74 100644
--- a/arch/arm/boot/dts/vf610-cosmic.dts
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -36,12 +36,37 @@
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1_1>;
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
+&iomuxc {
+ vf610-cosmic {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+ };
+};
+
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index c8047ca..7dd1d6e 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -34,12 +34,70 @@
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vcc_3v3_mcu: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ master-clkdir-out;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+};
+
+&adc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_ad5>;
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
};
&dspi0 {
bus-num = <0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dspi0_1>;
+ pinctrl-0 = <&pinctrl_dspi0>;
status = "okay";
sflash: at26df081a@0 {
@@ -56,26 +114,116 @@
&fec0 {
phy-mode = "rmii";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec0_1>;
+ pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1_1>;
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0_1>;
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ clocks = <&clks VF610_CLK_SAI2>;
+ };
+};
+
+&iomuxc {
+ vf610-twr {
+ pinctrl_adc0_ad5: adc0ad5grp {
+ fsl,pins = <
+ VF610_PAD_PTC30__ADC0_SE5 0xa1
+ >;
+ };
+
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x30d3
+ VF610_PAD_PTB15__I2C0_SDA 0x30d3
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
+ VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee
+ VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed
+ VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed
+ VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed
+ VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed
+ VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+ };
+};
+
+&sai2 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index d31ce1b..8048733 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -10,6 +10,7 @@
#include "skeleton.dtsi"
#include "vf610-pinfunc.h"
#include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
@@ -87,39 +88,66 @@
arm,tag-latency = <2 2 2>;
};
+ edma0: dma-controller@40018000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40018000 0x2000>,
+ <0x40024000 0x1000>,
+ <0x40025000 0x1000>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX0>,
+ <&clks VF610_CLK_DMAMUX1>;
+ };
+
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
- interrupts = <0 61 0x00>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART0>;
clock-names = "ipg";
+ dmas = <&edma0 0 2>,
+ <&edma0 0 3>;
+ dma-names = "rx","tx";
status = "disabled";
};
uart1: serial@40028000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40028000 0x1000>;
- interrupts = <0 62 0x04>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART1>;
clock-names = "ipg";
+ dmas = <&edma0 0 4>,
+ <&edma0 0 5>;
+ dma-names = "rx","tx";
status = "disabled";
};
uart2: serial@40029000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40029000 0x1000>;
- interrupts = <0 63 0x04>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART2>;
clock-names = "ipg";
+ dmas = <&edma0 0 6>,
+ <&edma0 0 7>;
+ dma-names = "rx","tx";
status = "disabled";
};
uart3: serial@4002a000 {
compatible = "fsl,vf610-lpuart";
reg = <0x4002a000 0x1000>;
- interrupts = <0 64 0x04>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART3>;
clock-names = "ipg";
+ dmas = <&edma0 0 8>,
+ <&edma0 0 9>;
+ dma-names = "rx","tx";
status = "disabled";
};
@@ -128,7 +156,7 @@
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x4002c000 0x1000>;
- interrupts = <0 67 0x04>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <5>;
@@ -138,20 +166,32 @@
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
- interrupts = <0 86 0x04>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI2>;
clock-names = "sai";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 0 21>,
+ <&edma0 0 20>;
status = "disabled";
};
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
- interrupts = <0 39 0x04>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_PIT>;
clock-names = "pit";
};
+ adc0: adc@4003b000 {
+ compatible = "fsl,vf610-adc";
+ reg = <0x4003b000 0x1000>;
+ interrupts = <0 53 0x04>;
+ clocks = <&clks VF610_CLK_ADC0>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
@@ -164,7 +204,7 @@
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
reg = <0x40044000 0x1000>;
- interrupts = <0 24 0x04>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_QSPI0_EN>,
<&clks VF610_CLK_QSPI0>;
clock-names = "qspi_en", "qspi";
@@ -175,182 +215,12 @@
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
#gpio-range-cells = <3>;
-
- /* functions and groups pins */
-
- dcu0 {
- pinctrl_dcu0_1: dcu0grp_1 {
- fsl,pins = <
- VF610_PAD_PTB8__GPIO_30 0x42
- VF610_PAD_PTE0__DCU0_HSYNC 0x42
- VF610_PAD_PTE1__DCU0_VSYNC 0x42
- VF610_PAD_PTE2__DCU0_PCLK 0x42
- VF610_PAD_PTE4__DCU0_DE 0x42
- VF610_PAD_PTE5__DCU0_R0 0x42
- VF610_PAD_PTE6__DCU0_R1 0x42
- VF610_PAD_PTE7__DCU0_R2 0x42
- VF610_PAD_PTE8__DCU0_R3 0x42
- VF610_PAD_PTE9__DCU0_R4 0x42
- VF610_PAD_PTE10__DCU0_R5 0x42
- VF610_PAD_PTE11__DCU0_R6 0x42
- VF610_PAD_PTE12__DCU0_R7 0x42
- VF610_PAD_PTE13__DCU0_G0 0x42
- VF610_PAD_PTE14__DCU0_G1 0x42
- VF610_PAD_PTE15__DCU0_G2 0x42
- VF610_PAD_PTE16__DCU0_G3 0x42
- VF610_PAD_PTE17__DCU0_G4 0x42
- VF610_PAD_PTE18__DCU0_G5 0x42
- VF610_PAD_PTE19__DCU0_G6 0x42
- VF610_PAD_PTE20__DCU0_G7 0x42
- VF610_PAD_PTE21__DCU0_B0 0x42
- VF610_PAD_PTE22__DCU0_B1 0x42
- VF610_PAD_PTE23__DCU0_B2 0x42
- VF610_PAD_PTE24__DCU0_B3 0x42
- VF610_PAD_PTE25__DCU0_B4 0x42
- VF610_PAD_PTE26__DCU0_B5 0x42
- VF610_PAD_PTE27__DCU0_B6 0x42
- VF610_PAD_PTE28__DCU0_B7 0x42
- >;
- };
- };
-
- dspi0 {
- pinctrl_dspi0_1: dspi0grp_1 {
- fsl,pins = <
- VF610_PAD_PTB19__DSPI0_CS0 0x1182
- VF610_PAD_PTB20__DSPI0_SIN 0x1181
- VF610_PAD_PTB21__DSPI0_SOUT 0x1182
- VF610_PAD_PTB22__DSPI0_SCK 0x1182
- >;
- };
- };
-
- esdhc1 {
- pinctrl_esdhc1_1: esdhc1grp_1 {
- fsl,pins = <
- VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
- VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
- VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
- VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
- VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
- VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
- VF610_PAD_PTA7__GPIO_134 0x219d
- >;
- };
- };
-
- fec0 {
- pinctrl_fec0_1: fec0grp_1 {
- fsl,pins = <
- VF610_PAD_PTA6__RMII_CLKIN 0x30d1
- VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
- VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
- VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
- VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
- VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
- VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
- VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
- VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
- VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
- >;
- };
- };
-
- fec1 {
- pinctrl_fec1_1: fec1grp_1 {
- fsl,pins = <
- VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
- VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
- VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
- VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
- VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
- VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
- VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
- VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
- >;
- };
- };
-
- i2c0 {
- pinctrl_i2c0_1: i2c0grp_1 {
- fsl,pins = <
- VF610_PAD_PTB14__I2C0_SCL 0x30d3
- VF610_PAD_PTB15__I2C0_SDA 0x30d3
- >;
- };
- };
-
- pwm0 {
- pinctrl_pwm0_1: pwm0grp_1 {
- fsl,pins = <
- VF610_PAD_PTB0__FTM0_CH0 0x1582
- VF610_PAD_PTB1__FTM0_CH1 0x1582
- VF610_PAD_PTB2__FTM0_CH2 0x1582
- VF610_PAD_PTB3__FTM0_CH3 0x1582
- VF610_PAD_PTB6__FTM0_CH6 0x1582
- VF610_PAD_PTB7__FTM0_CH7 0x1582
- >;
- };
- };
-
- qspi0 {
- pinctrl_qspi0_1: qspi0grp_1 {
- fsl,pins = <
- VF610_PAD_PTD0__QSPI0_A_QSCK 0x307b
- VF610_PAD_PTD1__QSPI0_A_CS0 0x307f
- VF610_PAD_PTD2__QSPI0_A_DATA3 0x3073
- VF610_PAD_PTD3__QSPI0_A_DATA2 0x3073
- VF610_PAD_PTD4__QSPI0_A_DATA1 0x3073
- VF610_PAD_PTD5__QSPI0_A_DATA0 0x307b
- VF610_PAD_PTD7__QSPI0_B_QSCK 0x307b
- VF610_PAD_PTD8__QSPI0_B_CS0 0x307f
- VF610_PAD_PTD9__QSPI0_B_DATA3 0x3073
- VF610_PAD_PTD10__QSPI0_B_DATA2 0x3073
- VF610_PAD_PTD11__QSPI0_B_DATA1 0x3073
- VF610_PAD_PTD12__QSPI0_B_DATA0 0x307b
- >;
- };
- };
-
- sai2 {
- pinctrl_sai2_1: sai2grp_1 {
- fsl,pins = <
- VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
- VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee
- VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed
- VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed
- VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed
- VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed
- VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp_1 {
- fsl,pins = <
- VF610_PAD_PTB4__UART1_TX 0x21a2
- VF610_PAD_PTB5__UART1_RX 0x21a1
- >;
- };
- };
-
- usbvbus {
- pinctrl_usbvbus_1: usbvbusgrp_1 {
- fsl,pins = <
- VF610_PAD_PTA24__USB1_VBUS_EN 0x219c
- VF610_PAD_PTA16__USB0_VBUS_EN 0x219c
- >;
- };
- };
-
};
gpio1: gpio@40049000 {
compatible = "fsl,vf610-gpio";
reg = <0x40049000 0x1000 0x400ff000 0x40>;
- interrupts = <0 107 0x04>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -361,7 +231,7 @@
gpio2: gpio@4004a000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004a000 0x1000 0x400ff040 0x40>;
- interrupts = <0 108 0x04>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -372,7 +242,7 @@
gpio3: gpio@4004b000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004b000 0x1000 0x400ff080 0x40>;
- interrupts = <0 109 0x04>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -383,7 +253,7 @@
gpio4: gpio@4004c000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
- interrupts = <0 110 0x04>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -394,7 +264,7 @@
gpio5: gpio@4004d000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004d000 0x1000 0x400ff100 0x40>;
- interrupts = <0 111 0x04>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -412,9 +282,12 @@
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x40066000 0x1000>;
- interrupts =<0 71 0x04>;
+ interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C0>;
clock-names = "ipg";
+ dmas = <&edma0 0 50>,
+ <&edma0 0 51>;
+ dma-names = "rx","tx";
status = "disabled";
};
@@ -432,10 +305,25 @@
reg = <0x40080000 0x80000>;
ranges;
+ edma1: dma-controller@40098000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40098000 0x2000>,
+ <0x400a1000 0x1000>,
+ <0x400a2000 0x1000>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX2>,
+ <&clks VF610_CLK_DMAMUX3>;
+ };
+
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
- interrupts = <0 65 0x04>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART4>;
clock-names = "ipg";
status = "disabled";
@@ -444,16 +332,25 @@
uart5: serial@400aa000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400aa000 0x1000>;
- interrupts = <0 66 0x04>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART5>;
clock-names = "ipg";
status = "disabled";
};
+ adc1: adc@400bb000 {
+ compatible = "fsl,vf610-adc";
+ reg = <0x400bb000 0x1000>;
+ interrupts = <0 54 0x04>;
+ clocks = <&clks VF610_CLK_ADC1>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
- interrupts = <0 78 0x04>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
@@ -464,7 +361,7 @@
fec1: ethernet@400d1000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
- interrupts = <0 79 0x04>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 8b67b19..93d1980 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -134,6 +134,7 @@
#clock-cells = <1>;
compatible = "xlnx,ps7-clkc";
ps-clk-frequency = <33333333>;
+ fclk-enable = <0>;
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 845bc74..ee69829 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -29,6 +29,7 @@
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y
+CONFIG_SOC_DRA7XX=y
CONFIG_SOC_AM43XX=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SOCFPGA=y
diff --git a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
similarity index 75%
rename from arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
rename to arch/arm/include/asm/hardware/cache-feroceon-l2.h
index 06f982d..12e1588 100644
--- a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
+++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
+ * arch/arm/include/asm/hardware/cache-feroceon-l2.h
*
* Copyright (C) 2008 Marvell Semiconductor
*
@@ -9,3 +9,5 @@
*/
extern void __init feroceon_l2_init(int l2_wt_override);
+extern int __init feroceon_of_init(void);
+
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index 83f2aa8..f6fcc67 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -12,12 +12,6 @@
#ifndef _ASMARM_TIMEX_H
#define _ASMARM_TIMEX_H
-#ifdef CONFIG_ARCH_MULTIPLATFORM
-#define CLOCK_TICK_RATE 1000000
-#else
-#include <mach/timex.h>
-#endif
-
typedef unsigned long cycles_t;
#define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; })
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index e47f5fd..787bb50 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -21,6 +21,7 @@
#include <mach/at91rm9200.h>
#include <mach/at91_st.h>
#include <mach/cpu.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 3ebc979..f3f19f2 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -21,6 +21,7 @@
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
+#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
@@ -922,6 +923,7 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -960,6 +962,7 @@
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -987,9 +990,10 @@
if (pins & ATMEL_UART_RTS) {
/*
* AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
- * We need to drive the pin manually. Default is off (RTS is active low).
+ * We need to drive the pin manually. The serial driver will driver
+ * this to high when initializing.
*/
- at91_set_gpio_output(AT91_PIN_PA21, 1);
+ uart0_data.rts_gpio = AT91_PIN_PA21;
}
}
@@ -1009,6 +1013,7 @@
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1060,6 +1065,7 @@
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1103,6 +1109,7 @@
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index bc7b363..7fd13ae 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -31,6 +31,7 @@
#include <asm/mach/time.h>
#include <mach/at91_st.h>
+#include <mach/hardware.h>
static unsigned long last_crtr;
static u32 irqmask;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 6c821e5..c3d22be 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -21,6 +21,7 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index eda8d16..2ae7715 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -25,6 +25,7 @@
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_adc.h>
+#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
@@ -819,6 +820,7 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -857,6 +859,7 @@
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -908,6 +911,7 @@
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -951,6 +955,7 @@
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -994,6 +999,7 @@
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
@@ -1037,6 +1043,7 @@
static struct atmel_uart_data uart4_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart4_dmamask = DMA_BIT_MASK(32);
@@ -1075,6 +1082,7 @@
static struct atmel_uart_data uart5_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart5_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 6276b4c..48b51f7 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -20,6 +20,7 @@
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91sam9261.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b2a3474..80e3589 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -25,6 +25,7 @@
#include <mach/at91sam9261_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
@@ -880,6 +881,7 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -918,6 +920,7 @@
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -961,6 +964,7 @@
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1004,6 +1008,7 @@
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 37b90f4..486530c 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -19,6 +19,7 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9263.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 4aeaddd..43d53d6 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -24,6 +24,7 @@
#include <mach/at91sam9263_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
@@ -1324,6 +1325,7 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -1362,6 +1364,7 @@
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1405,6 +1408,7 @@
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1448,6 +1452,7 @@
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 0f04ffe..0a9e2fc 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -19,6 +19,7 @@
#include <linux/of_irq.h>
#include <asm/mach/time.h>
+#include <mach/hardware.h>
#define AT91_PIT_MR 0x00 /* Mode Register */
#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 2f455ce..8c11696 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -20,6 +20,7 @@
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
#include <mach/cpu.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index cb36fa8..77b04c2 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -32,6 +32,7 @@
#include <mach/at91sam9_smc.h>
#include <linux/platform_data/dma-atmel.h>
#include <mach/atmel-mci.h>
+#include <mach/hardware.h>
#include <media/atmel-isi.h>
@@ -1587,6 +1588,7 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -1625,6 +1627,7 @@
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1668,6 +1671,7 @@
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1711,6 +1715,7 @@
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1754,6 +1759,7 @@
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 3651517..c0d5474 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -20,6 +20,7 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index a698bda..428fc41 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -21,6 +21,7 @@
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include <linux/platform_data/dma-atmel.h>
#include "board.h"
@@ -956,6 +957,7 @@
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -994,6 +996,7 @@
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1045,6 +1048,7 @@
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1088,6 +1092,7 @@
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1131,6 +1136,7 @@
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index bad94b8..7523f1c 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -19,7 +19,7 @@
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
-#include <mach/timex.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index c0e637a..07d0bf2 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -25,6 +25,7 @@
#include <linux/time.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/at91x40.h>
#include <asm/mach/time.h>
#include "at91_tc.h"
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index c1d61d2..416bae8 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -31,6 +31,7 @@
#include <asm/mach/arch.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 65c0d6b..5f25fa5 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -30,6 +30,7 @@
#include <asm/mach/arch.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 869cbec..e4a5ac1 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -26,6 +26,7 @@
#include <asm/mach/arch.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index 9068021..38dca2b 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -55,4 +55,6 @@
#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */
#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */
+#define AT91X40_MASTER_CLOCK 40000000
+
#endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
deleted file mode 100644
index 5e917a6..0000000
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/timex.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_AT91X40
-
-#define AT91X40_MASTER_CLOCK 40000000
-#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
-
-#else
-
-#define CLOCK_TICK_RATE 12345678
-
-#endif
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 590b52d..8bda1ce 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -27,6 +27,7 @@
#include <asm/mach/irq.h>
#include <mach/cpu.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "generic.h"
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
deleted file mode 100644
index de6fd19..0000000
--- a/arch/arm/mach-clps711x/include/mach/timex.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* Bogus value */
-#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
deleted file mode 100644
index 9b88529..0000000
--- a/arch/arm/mach-davinci/include/mach/timex.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * DaVinci timer defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz,
- * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/
- * linux/jiffies.h) are not used directly in code. Currently none of the
- * code relevant to DaVinci platform depends on these values directly.
- */
-#define CLOCK_TICK_RATE 27000000
-
-#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 0bc7cdf..d8c439c 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -20,18 +20,6 @@
Say 'Y' here if you want your kernel to support the
CompuLab CM-A510 Board.
-config MACH_DOVE_DT
- bool "Marvell Dove Flattened Device Tree"
- select DOVE_CLK
- select ORION_IRQCHIP
- select ORION_TIMER
- select REGULATOR
- select REGULATOR_FIXED_VOLTAGE
- select USE_OF
- help
- Say 'Y' here if you want your kernel to support the
- Marvell Dove using flattened device tree.
-
endmenu
endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index cbc5c06..b608a21 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -2,5 +2,4 @@
obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o
obj-$(CONFIG_PCI) += pcie.o
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
-obj-$(CONFIG_MACH_DOVE_DT) += board-dt.o
obj-$(CONFIG_MACH_CM_A510) += cm-a510.o
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
deleted file mode 100644
index 251d538..0000000
--- a/arch/arm/mach-dove/include/mach/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h
deleted file mode 100644
index 4fb43b2..0000000
--- a/arch/arm/mach-ebsa110/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/timex.h
- *
- * Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA110 architecture timex specifications
- */
-
-/*
- * On the EBSA, the clock ticks at weird rates.
- * This is therefore not used to calculate the
- * divisor.
- */
-#define CLOCK_TICK_RATE 47894000
-
diff --git a/arch/arm/mach-efm32/include/mach/entry-macro.S b/arch/arm/mach-efm32/include/mach/entry-macro.S
deleted file mode 100644
index 322159d..0000000
--- a/arch/arm/mach-efm32/include/mach/entry-macro.S
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * Empty file waiting for deletion once <mach/entry-macro.S> isn't needed any
- * more. Patch "ARM: v7-M: drop using mach/entry-macro.S" sitting in next.
- */
diff --git a/arch/arm/mach-efm32/include/mach/timex.h b/arch/arm/mach-efm32/include/mach/timex.h
deleted file mode 100644
index 7a8b26d..0000000
--- a/arch/arm/mach-efm32/include/mach/timex.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * Empty file waiting for deletion once <mach/timex.h> isn't needed any more.
- */
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 157ba88..6c70547 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -117,7 +117,7 @@
#define EP93XX_TIMER4_CLOCK 983040
#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
-#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
+#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ)
static unsigned int last_jiffy_time;
diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h
deleted file mode 100644
index 6b3503b..0000000
--- a/arch/arm/mach-ep93xx/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/timex.h
- */
-
-#define CLOCK_TICK_RATE 983040
diff --git a/arch/arm/mach-exynos/include/mach/timex.h b/arch/arm/mach-exynos/include/mach/timex.h
deleted file mode 100644
index 6d13875..0000000
--- a/arch/arm/mach-exynos/include/mach/timex.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/timex.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Based on arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * EXYNOS4 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H __FILE__
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h
deleted file mode 100644
index d0fea9d..0000000
--- a/arch/arm/mach-footbridge/include/mach/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/timex.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA285 architecture timex specifications
- */
-
-/*
- * We assume a constant here; this satisfies the maths in linux/timex.h
- * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but
- * this must be a constant.
- */
-#define CLOCK_TICK_RATE (50000000/16)
diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h
deleted file mode 100644
index dc5690b..0000000
--- a/arch/arm/mach-gemini/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Gemini timex specifications
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/* When AHB bus frequency is 150MHz */
-#define CLOCK_TICK_RATE 38000000
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 8f4649b..1abae5f 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -8,7 +8,7 @@
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
- select HAVE_ARM_TWD
+ select HAVE_ARM_TWD if SMP
select HAVE_SMP
select PINCTRL
select PINCTRL_SINGLE
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index af2e582..4d677f4 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -482,6 +482,9 @@
if (IS_ENABLED(CONFIG_PCI_IMX6))
clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index 3781a18..4c86f30 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -266,6 +266,9 @@
/* Audio-related clocks configuration */
clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 9d47adc..7a9b985 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -236,8 +236,6 @@
regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
IMX6Q_GPR1_GINT);
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
suspend_set_ops(&imx6q_pm_ops);
}
diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h
deleted file mode 100644
index 1dcb420..0000000
--- a/arch/arm/mach-integrator/include/mach/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/timex.h
- *
- * Integrator architecture timex specifications
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * ??
- */
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
deleted file mode 100644
index 45fb274..0000000
--- a/arch/arm/mach-iop13xx/include/mach/timex.h
+++ /dev/null
@@ -1 +0,0 @@
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
deleted file mode 100644
index 7262ab8..0000000
--- a/arch/arm/mach-iop32x/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/timex.h
- *
- * IOP32x architecture timex specifications
- */
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
deleted file mode 100644
index 54c5890..0000000
--- a/arch/arm/mach-iop33x/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/timex.h
- *
- * IOP3xx architecture timex specifications
- */
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 6d68aed..dc5d7a0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -23,7 +23,6 @@
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/time.h>
-#include <linux/timex.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
@@ -45,6 +44,17 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#define IXP4XX_TIMER_FREQ 66666000
+
+/*
+ * The timer register doesn't allow to specify the two least significant bits of
+ * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is
+ * the best value with the two least significant bits unset.
+ */
+#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \
+ (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
+ (IXP4XX_OST_RELOAD_MASK + 1)
+
static void __init ixp4xx_clocksource_init(void);
static void __init ixp4xx_clockevent_init(void);
static struct clock_event_device clockevent_ixp4xx;
@@ -520,7 +530,7 @@
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK;
+ osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
opts = IXP4XX_OST_ENABLE;
break;
case CLOCK_EVT_MODE_ONESHOT:
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
deleted file mode 100644
index 0396d89..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/timex.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/timex.h
- *
- */
-
-#include <mach/ixp4xx-regs.h>
-
-/*
- * We use IXP425 General purpose timer for our timer needs, it runs at
- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
- * timer register ignores the bottom 2 bits of the LATCH value.
- */
-#define IXP4XX_TIMER_FREQ 66666000
-#define CLOCK_TICK_RATE \
- (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index 6e6bb7d..aa0d212 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -47,6 +47,9 @@
static const char *keystone_match[] __initconst = {
"ti,keystone-evm",
+ "ti,k2hk-evm",
+ "ti,k2l-evm",
+ "ti,k2e-evm",
NULL,
};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index fe8319a..df4b263 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -106,13 +106,6 @@
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
-config MACH_MV88F6281GTW_GE_DT
- bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
- depends on ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Marvell 88F6281 GTW GE Board (Flattened Device Tree).
-
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 144b511..3a72c5c 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,5 +1,4 @@
-obj-y += common.o pcie.o
-obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
+obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o common.o pcie.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
@@ -13,4 +12,3 @@
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
-obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 7818815..2801da4 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -19,11 +19,84 @@
#include <linux/of_platform.h>
#include <linux/dma-mapping.h>
#include <linux/irqchip.h>
-#include <linux/kexec.h>
+#include <asm/hardware/cache-feroceon-l2.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
#include <plat/common.h>
-#include "common.h"
+#include <plat/pcie.h>
+#include "pm.h"
+
+static struct map_desc kirkwood_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+ .length = KIRKWOOD_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init kirkwood_map_io(void)
+{
+ iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+static struct resource kirkwood_cpufreq_resources[] = {
+ [0] = {
+ .start = CPU_CONTROL_PHYS,
+ .end = CPU_CONTROL_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+ .name = "kirkwood-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
+ .resource = kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+ platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = DDR_OPERATION_BASE,
+ .end = DDR_OPERATION_BASE + 3,
+ },
+};
+
+static struct platform_device kirkwood_cpuidle = {
+ .name = "kirkwood_cpuidle",
+ .id = -1,
+ .resource = kirkwood_cpuidle_resource,
+ .num_resources = 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+ platform_device_register(&kirkwood_cpuidle);
+}
+
+/* Temporary here since mach-mvebu has a function we can use */
+static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
@@ -104,35 +177,35 @@
}
}
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+static void __init kirkwood_disable_mbus_error_propagation(void)
+{
+ void __iomem *cpu_config;
+
+ cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+ writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+ iounmap(cpu_config);
+}
+
static void __init kirkwood_dt_init(void)
{
- pr_info("Kirkwood: %s.\n", kirkwood_id());
-
- /*
- * Disable propagation of mbus errors to the CPU local bus,
- * as this causes mbus errors (which can occur for example
- * for PCI aborts) to throw CPU aborts, which we're not set
- * up to deal with.
- */
- writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+ kirkwood_disable_mbus_error_propagation();
BUG_ON(mvebu_mbus_dt_init());
- kirkwood_l2_init();
-
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ feroceon_of_init();
+#endif
kirkwood_cpufreq_init();
kirkwood_cpuidle_init();
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
-#ifdef CONFIG_KEXEC
- kexec_reinit = kirkwood_enable_pcie;
-#endif
-
- if (of_machine_is_compatible("marvell,mv88f6281gtw-ge"))
- mv88f6281gtw_ge_init();
-
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
deleted file mode 100644
index ee5eea6..0000000
--- a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
- *
- * Marvell 88F6281 GTW GE Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
-};
-
-static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
- .port_names[0] = "lan1",
- .port_names[1] = "lan2",
- .port_names[2] = "lan3",
- .port_names[3] = "lan4",
- .port_names[4] = "wan",
- .port_names[5] = "cpu",
-};
-
-static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
- .nr_chips = 1,
- .chip = &mv88f6281gtw_ge_switch_chip_data,
-};
-
-void __init mv88f6281gtw_ge_init(void)
-{
- kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
- kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index f3407a5..255f33a 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -25,10 +25,10 @@
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
+#include <asm/hardware/cache-feroceon-l2.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
#include <linux/platform_data/asoc-kirkwood.h>
-#include <plat/cache-feroceon-l2.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include <linux/platform_data/mtd-orion_nand.h>
#include <linux/platform_data/usb-ehci-orion.h>
@@ -36,6 +36,7 @@
#include <plat/time.h>
#include <linux/platform_data/dma-mv_xor.h>
#include "common.h"
+#include "pm.h"
/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
#define KIRKWOOD_MBUS_NAND_TARGET 0x01
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 05fd648..832a4e2 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,19 +58,6 @@
void kirkwood_restart(enum reboot_mode, const char *);
void kirkwood_clk_init(void);
-#ifdef CONFIG_PM
-void kirkwood_pm_init(void);
-#else
-static inline void kirkwood_pm_init(void) {};
-#endif
-
-/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
-void mv88f6281gtw_ge_init(void);
-#else
-static inline void mv88f6281gtw_ge_init(void) {};
-#endif
-
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 8b9d1c9..6e5077e 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -14,6 +14,7 @@
#include <mach/kirkwood.h>
#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
+#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
#define CPU_CONFIG_ERROR_PROP 0x00000004
#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
@@ -79,5 +80,6 @@
#define CGC_RESERVED (0x6 << 21)
#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
+#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
deleted file mode 100644
index c923cd1..0000000
--- a/arch/arm/mach-kirkwood/include/mach/timex.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
-
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
index c6ab8d9..8e5e032 100644
--- a/arch/arm/mach-kirkwood/pm.c
+++ b/arch/arm/mach-kirkwood/pm.c
@@ -21,15 +21,16 @@
#include "common.h"
static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
static void kirkwood_low_power(void)
{
u32 mem_pm_ctrl;
- mem_pm_ctrl = readl(MEMORY_PM_CTRL);
+ mem_pm_ctrl = readl(memory_pm_ctrl);
/* Set peripherals to low-power mode */
- writel_relaxed(~0, MEMORY_PM_CTRL);
+ writel_relaxed(~0, memory_pm_ctrl);
/* Set DDR in self-refresh */
writel_relaxed(0x7, ddr_operation_base);
@@ -41,7 +42,7 @@
*/
cpu_do_idle();
- writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL);
+ writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
}
static int kirkwood_suspend_enter(suspend_state_t state)
@@ -69,5 +70,7 @@
void __init kirkwood_pm_init(void)
{
ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+ memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
suspend_set_ops(&kirkwood_suspend_ops);
}
diff --git a/arch/arm/mach-kirkwood/pm.h b/arch/arm/mach-kirkwood/pm.h
new file mode 100644
index 0000000..21e7530
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pm.h
@@ -0,0 +1,26 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
deleted file mode 100644
index 10f7163..0000000
--- a/arch/arm/mach-ks8695/include/mach/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/timex.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - Time Parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <mach/hardware.h>
-
-#define CLOCK_TICK_RATE KS8695_CLOCK_RATE
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h
deleted file mode 100644
index 8d4066b..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/timex.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/timex.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Rate in Hz of the main system oscillator. This value should match
- * the value 'MAIN_OSC_FREQ' in platform.h
- */
-#define CLOCK_TICK_RATE 13000000
-
-#endif
diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h
deleted file mode 100644
index 70c9f1d..0000000
--- a/arch/arm/mach-mmp/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifdef CONFIG_CPU_MMP2
-#define CLOCK_TICK_RATE 6500000
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 024022d..048997e 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -39,6 +39,12 @@
#include "clock.h"
+#ifdef CONFIG_CPU_MMP2
+#define MMP_CLOCK_FREQ 6500000
+#else
+#define MMP_CLOCK_FREQ 3250000
+#endif
+
#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
#define MAX_DELTA (0xfffffffe)
@@ -195,14 +201,14 @@
{
timer_config();
- sched_clock_register(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
+ sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ);
ckevt.cpumask = cpumask_of(0);
setup_irq(irq, &timer_irq);
- clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
- clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE,
+ clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ);
+ clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ,
MIN_DELTA, MAX_DELTA);
}
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index ba470d6..3795ae2 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -2,7 +2,6 @@
bool "MOXA ART SoC" if ARCH_MULTI_V4T
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
- select DMA_OF
select USE_OF
select CLKSRC_OF
select CLKSRC_MMIO
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 9625cf3..a7f959e 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,50 +1,9 @@
-config ARCH_MSM
- bool
-
-config ARCH_MSM_DT
- bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7
- select ARCH_MSM
- select ARCH_REQUIRE_GPIOLIB
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm's devicetree based MSM systems.
-
if ARCH_MSM
-menu "Qualcomm MSM SoC Selection"
- depends on ARCH_MSM_DT
-
-config ARCH_MSM8X60
- bool "Enable support for MSM8X60"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select MSM_TIMER
-
-config ARCH_MSM8960
- bool "Enable support for MSM8960"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select MSM_TIMER
-
-config ARCH_MSM8974
- bool "Enable support for MSM8974"
- select ARM_GIC
- select CPU_V7
- select HAVE_ARM_ARCH_TIMER
- select HAVE_SMP
- select MSM_SCM if SMP
-
-endmenu
-
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
@@ -54,7 +13,7 @@
select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_SMD_PKG3
config ARCH_MSM7X30
@@ -66,7 +25,7 @@
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_VIC
config ARCH_QSD8X50
@@ -78,7 +37,7 @@
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_VIC
endchoice
@@ -99,7 +58,7 @@
bool
menu "Qualcomm MSM Board Type"
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config MACH_HALIBUT
depends on ARCH_MSM
@@ -153,7 +112,4 @@
config MSM_SCM
bool
-config MSM_TIMER
- bool
-
endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 8e307a1..27c078a 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_MSM_TIMER) += timer.o
obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
@@ -14,18 +13,11 @@
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 33c7725..0a4899b 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -24,7 +24,6 @@
unsigned int mtype, void *caller);
extern struct smp_operations msm_smp_ops;
-extern void msm_cpu_die(unsigned int cpu);
struct msm_mmc_platform_data;
diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S
deleted file mode 100644
index 6c62c3f..0000000
--- a/arch/arm/mach-msm/headsmp.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/arch/arm/mach-realview/headsmp.S
- *
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-/*
- * MSM specific entry point for secondary CPUs. This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(msm_secondary_startup)
- mrc p15, 0, r0, c0, c0, 5
- and r0, r0, #15
- adr r4, 1f
- ldmia r4, {r5, r6}
- sub r4, r4, r5
- add r6, r6, r4
-pen: ldr r7, [r6]
- cmp r7, r0
- bne pen
-
- /*
- * we've been released from the holding pen: secondary_stack
- * should now contain the SVC stack for this core
- */
- b secondary_startup
-ENDPROC(msm_secondary_startup)
-
- .align
-1: .long .
- .long pen_release
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
deleted file mode 100644
index 326a872..0000000
--- a/arch/arm/mach-msm/hotplug.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-
-#include "common.h"
-
-static inline void cpu_enter_lowpower(void)
-{
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-}
-
-static inline void platform_do_lowpower(unsigned int cpu)
-{
- /* Just enter wfi for now. TODO: Properly shut off the cpu. */
- for (;;) {
- /*
- * here's the WFI
- */
- asm("wfi"
- :
- :
- : "memory", "cc");
-
- if (pen_release == cpu_logical_map(cpu)) {
- /*
- * OK, proper wakeup, we're done
- */
- break;
- }
-
- /*
- * getting here, means that we have come out of WFI without
- * having been woken up - this shouldn't happen
- *
- * The trouble is, letting people know about this is not really
- * possible, since we are currently running incoherently, and
- * therefore cannot safely call printk() or anything else
- */
- pr_debug("CPU%u: spurious wakeup call\n", cpu);
- }
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void __ref msm_cpu_die(unsigned int cpu)
-{
- /*
- * we're ready for shutdown now, so do it
- */
- cpu_enter_lowpower();
- platform_do_lowpower(cpu);
-
- /*
- * bring this CPU back into the world of cache
- * coherency, and then restore interrupts
- */
- cpu_leave_lowpower();
-}
diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h
deleted file mode 100644
index a62e6b2..0000000
--- a/arch/arm/mach-msm/include/mach/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-msm/include/mach/timex.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_TIMEX_H
-#define __ASM_ARCH_MSM_TIMEX_H
-
-#define CLOCK_TICK_RATE 1000000
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 75062ef..e6ac679 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -15,11 +15,11 @@
#include <linux/ata_platform.h>
#include <linux/clk-provider.h>
#include <linux/ethtool.h>
+#include <asm/hardware/cache-feroceon-l2.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
-#include <plat/cache-feroceon-l2.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <linux/platform_data/mtd-orion_nand.h>
#include <plat/time.h>
diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h
deleted file mode 100644
index 0e8c443..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 5e269d7..4fecf5d 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,5 +1,5 @@
config ARCH_MVEBU
- bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
+ bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select COMMON_CLK
@@ -19,33 +19,98 @@
if ARCH_MVEBU
-menu "Marvell SOC with device tree"
+menu "Marvell EBU SoC variants"
-config MACH_ARMADA_370_XP
+config MACH_MVEBU_V7
bool
select ARMADA_370_XP_TIMER
select HAVE_SMP
select CACHE_L2X0
- select CPU_PJ4B
config MACH_ARMADA_370
- bool "Marvell Armada 370 boards"
+ bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
select ARMADA_370_CLK
- select MACH_ARMADA_370_XP
+ select CPU_PJ4B
+ select MACH_MVEBU_V7
select PINCTRL_ARMADA_370
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 370 SoC with device tree.
+config MACH_ARMADA_375
+ bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_753970
+ select ARM_GIC
+ select ARMADA_375_CLK
+ select CPU_V7
+ select MACH_MVEBU_V7
+ select NEON
+ select PINCTRL_ARMADA_375
+ help
+ Say 'Y' here if you want your kernel to support boards based
+ on the Marvell Armada 375 SoC with device tree.
+
+config MACH_ARMADA_38X
+ bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_753970
+ select ARM_GIC
+ select ARMADA_38X_CLK
+ select CPU_V7
+ select MACH_MVEBU_V7
+ select NEON
+ select PINCTRL_ARMADA_38X
+ help
+ Say 'Y' here if you want your kernel to support boards based
+ on the Marvell Armada 380/385 SoC with device tree.
+
config MACH_ARMADA_XP
- bool "Marvell Armada XP boards"
+ bool "Marvell Armada XP boards" if ARCH_MULTI_V7
select ARMADA_XP_CLK
- select MACH_ARMADA_370_XP
+ select CPU_PJ4B
+ select MACH_MVEBU_V7
select PINCTRL_ARMADA_XP
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada XP SoC with device tree.
+config MACH_DOVE
+ bool "Marvell Dove boards" if ARCH_MULTI_V7
+ select CACHE_L2X0
+ select CPU_PJ4
+ select DOVE_CLK
+ select ORION_IRQCHIP
+ select ORION_TIMER
+ select PINCTRL_DOVE
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Dove using flattened device tree.
+
+config MACH_KIRKWOOD
+ bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
+ select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_FEROCEON
+ select KIRKWOOD_CLK
+ select OF_IRQ
+ select ORION_IRQCHIP
+ select ORION_TIMER
+ select PCI
+ select PCI_QUIRKS
+ select PINCTRL_KIRKWOOD
+ select USE_OF
+ help
+ Say 'Y' here if you want your kernel to support boards based
+ on the Marvell Kirkwood device tree.
+
+config MACH_T5325
+ bool "HP T5325 thin client"
+ depends on MACH_KIRKWOOD
+ help
+ Say 'Y' here if you want your kernel to support the
+ HP T5325 Thin client
+
endmenu
endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 878aebe..a63e43b 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -4,7 +4,10 @@
AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
obj-y += system-controller.o mvebu-soc-id.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
+obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o
+obj-$(CONFIG_MACH_DOVE) += dove.o
obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
+obj-$(CONFIG_MACH_T5325) += board-t5325.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
deleted file mode 100644
index f6c9d1d..0000000
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Device Tree support for Armada 370 and XP platforms.
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/dma-mapping.h>
-#include <linux/mbus.h>
-#include <linux/slab.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include "armada-370-xp.h"
-#include "common.h"
-#include "coherency.h"
-#include "mvebu-soc-id.h"
-
-static void __init armada_370_xp_map_io(void)
-{
- debug_ll_io_init();
-}
-
-static void __init armada_370_xp_timer_and_clk_init(void)
-{
- of_clk_init(NULL);
- clocksource_of_init();
- coherency_init();
- BUG_ON(mvebu_mbus_dt_init());
-#ifdef CONFIG_CACHE_L2X0
- l2x0_of_init(0, ~0UL);
-#endif
-}
-
-static void __init i2c_quirk(void)
-{
- struct device_node *np;
- u32 dev, rev;
-
- /*
- * Only revisons more recent than A0 support the offload
- * mechanism. We can exit only if we are sure that we can
- * get the SoC revision and it is more recent than A0.
- */
- if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV)
- return;
-
- for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
- struct property *new_compat;
-
- new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);
-
- new_compat->name = kstrdup("compatible", GFP_KERNEL);
- new_compat->length = sizeof("marvell,mv78230-a0-i2c");
- new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
- GFP_KERNEL);
-
- of_update_property(np, new_compat);
- }
- return;
-}
-
-static void __init armada_370_xp_dt_init(void)
-{
- if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
- i2c_quirk();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const armada_370_xp_dt_compat[] = {
- "marvell,armada-370-xp",
- NULL,
-};
-
-DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)")
- .smp = smp_ops(armada_xp_smp_ops),
- .init_machine = armada_370_xp_dt_init,
- .map_io = armada_370_xp_map_io,
- .init_time = armada_370_xp_timer_and_clk_init,
- .restart = mvebu_restart,
- .dt_compat = armada_370_xp_dt_compat,
-MACHINE_END
diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c
new file mode 100644
index 0000000..65ace6d
--- /dev/null
+++ b/arch/arm/mach-mvebu/board-t5325.c
@@ -0,0 +1,41 @@
+/*
+ * HP T5325 Board Setup
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <sound/alc5623.h>
+#include "board.h"
+
+static struct platform_device hp_t5325_audio_device = {
+ .name = "t5325-audio",
+ .id = -1,
+};
+
+static struct alc5623_platform_data alc5621_data = {
+ .add_ctrl = 0x3700,
+ .jack_det_ctrl = 0x4810,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("alc5621", 0x1a),
+ .platform_data = &alc5621_data,
+ },
+};
+
+void __init t5325_init(void)
+{
+ i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
+ platform_device_register(&hp_t5325_audio_device);
+}
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
new file mode 100644
index 0000000..746134e
--- /dev/null
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -0,0 +1,139 @@
+/*
+ * Device Tree support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/mbus.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include "armada-370-xp.h"
+#include "common.h"
+#include "coherency.h"
+#include "mvebu-soc-id.h"
+
+/*
+ * Early versions of Armada 375 SoC have a bug where the BootROM
+ * leaves an external data abort pending. The kernel is hit by this
+ * data abort as soon as it enters userspace, because it unmasks the
+ * data aborts at this moment. We register a custom abort handler
+ * below to ignore the first data abort to work around this
+ * problem.
+ */
+static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ static int ignore_first;
+
+ if (!ignore_first && fsr == 0x1406) {
+ ignore_first = 1;
+ return 0;
+ }
+
+ return 1;
+}
+
+static void __init mvebu_timer_and_clk_init(void)
+{
+ of_clk_init(NULL);
+ clocksource_of_init();
+ coherency_init();
+ BUG_ON(mvebu_mbus_dt_init());
+#ifdef CONFIG_CACHE_L2X0
+ l2x0_of_init(0, ~0UL);
+#endif
+
+ if (of_machine_is_compatible("marvell,armada375"))
+ hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
+ "imprecise external abort");
+}
+
+static void __init i2c_quirk(void)
+{
+ struct device_node *np;
+ u32 dev, rev;
+
+ /*
+ * Only revisons more recent than A0 support the offload
+ * mechanism. We can exit only if we are sure that we can
+ * get the SoC revision and it is more recent than A0.
+ */
+ if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV)
+ return;
+
+ for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
+ struct property *new_compat;
+
+ new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);
+
+ new_compat->name = kstrdup("compatible", GFP_KERNEL);
+ new_compat->length = sizeof("marvell,mv78230-a0-i2c");
+ new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
+ GFP_KERNEL);
+
+ of_update_property(np, new_compat);
+ }
+ return;
+}
+
+static void __init mvebu_dt_init(void)
+{
+ if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
+ i2c_quirk();
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const armada_370_xp_dt_compat[] = {
+ "marvell,armada-370-xp",
+ NULL,
+};
+
+DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
+ .smp = smp_ops(armada_xp_smp_ops),
+ .init_machine = mvebu_dt_init,
+ .init_time = mvebu_timer_and_clk_init,
+ .restart = mvebu_restart,
+ .dt_compat = armada_370_xp_dt_compat,
+MACHINE_END
+
+static const char * const armada_375_dt_compat[] = {
+ "marvell,armada375",
+ NULL,
+};
+
+DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
+ .init_time = mvebu_timer_and_clk_init,
+ .restart = mvebu_restart,
+ .dt_compat = armada_375_dt_compat,
+MACHINE_END
+
+static const char * const armada_38x_dt_compat[] = {
+ "marvell,armada380",
+ "marvell,armada385",
+ NULL,
+};
+
+DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
+ .init_time = mvebu_timer_and_clk_init,
+ .restart = mvebu_restart,
+ .dt_compat = armada_38x_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
new file mode 100644
index 0000000..de7f0a1
--- /dev/null
+++ b/arch/arm/mach-mvebu/board.h
@@ -0,0 +1,22 @@
+/*
+ * Board functions for Marvell System On Chip
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MVEBU_BOARD_H
+#define __ARCH_MVEBU_BOARD_H
+
+#ifdef CONFIG_MACH_T5325
+void t5325_init(void);
+#else
+static inline void t5325_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-mvebu/dove.c
similarity index 60%
rename from arch/arm/mach-dove/board-dt.c
rename to arch/arm/mach-mvebu/dove.c
index 49fa9ab..5e5a436 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-dove/board-dt.c
+ * arch/arm/mach-mvebu/dove.c
*
* Marvell Dove 88AP510 System On Chip FDT Board
*
@@ -9,17 +9,14 @@
*/
#include <linux/init.h>
-#include <linux/clk-provider.h>
+#include <linux/mbus.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/arch.h>
-#include <mach/dove.h>
-#include <mach/pm.h>
-#include <plat/common.h>
#include "common.h"
-static void __init dove_dt_init(void)
+static void __init dove_init(void)
{
pr_info("Dove 88AP510 SoC\n");
@@ -30,14 +27,13 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char * const dove_dt_board_compat[] = {
+static const char * const dove_dt_compat[] = {
"marvell,dove",
NULL
};
-DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
- .map_io = dove_map_io,
- .init_machine = dove_dt_init,
- .restart = dove_restart,
- .dt_compat = dove_dt_board_compat,
+DT_MACHINE_START(DOVE_DT, "Marvell Dove")
+ .init_machine = dove_init,
+ .restart = mvebu_restart,
+ .dt_compat = dove_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c
new file mode 100644
index 0000000..cbb816f
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.c
@@ -0,0 +1,76 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include "kirkwood.h"
+
+static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
+
+static void kirkwood_low_power(void)
+{
+ u32 mem_pm_ctrl;
+
+ mem_pm_ctrl = readl(memory_pm_ctrl);
+
+ /* Set peripherals to low-power mode */
+ writel_relaxed(~0, memory_pm_ctrl);
+
+ /* Set DDR in self-refresh */
+ writel_relaxed(0x7, ddr_operation_base);
+
+ /*
+ * Set CPU in wait-for-interrupt state.
+ * This disables the CPU core clocks,
+ * the array clocks, and also the L2 controller.
+ */
+ cpu_do_idle();
+
+ writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ kirkwood_low_power();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+ return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+ .enter = kirkwood_suspend_enter,
+ .valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+ ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+ memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
+ suspend_set_ops(&kirkwood_suspend_ops);
+ return 0;
+}
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h
new file mode 100644
index 0000000..21e7530
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.h
@@ -0,0 +1,26 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
new file mode 100644
index 0000000..120207f
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-mvebu/kirkwood.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include "kirkwood.h"
+#include "kirkwood-pm.h"
+#include "common.h"
+#include "board.h"
+
+static struct resource kirkwood_cpufreq_resources[] = {
+ [0] = {
+ .start = CPU_CONTROL_PHYS,
+ .end = CPU_CONTROL_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+ .name = "kirkwood-cpufreq",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
+ .resource = kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+ platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = DDR_OPERATION_BASE,
+ .end = DDR_OPERATION_BASE + 3,
+ },
+};
+
+static struct platform_device kirkwood_cpuidle = {
+ .name = "kirkwood_cpuidle",
+ .id = -1,
+ .resource = kirkwood_cpuidle_resource,
+ .num_resources = 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+ platform_device_register(&kirkwood_cpuidle);
+}
+
+#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
+{
+ struct device_node *np;
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by u-boot
+ * if the clocks are turned off. Usually, u-boot on kirkwood boards
+ * has no DT support to properly set local-mac-address property.
+ * As a workaround, we get the MAC address from mv643xx_eth registers
+ * and update the port device node if no valid MAC address is set.
+ */
+ for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+ struct device_node *pnp = of_get_parent(np);
+ struct clk *clk;
+ struct property *pmac;
+ void __iomem *io;
+ u8 *macaddr;
+ u32 reg;
+
+ if (!pnp)
+ continue;
+
+ /* skip disabled nodes or nodes with valid MAC address*/
+ if (!of_device_is_available(pnp) || of_get_mac_address(np))
+ goto eth_fixup_skip;
+
+ clk = of_clk_get(pnp, 0);
+ if (IS_ERR(clk))
+ goto eth_fixup_skip;
+
+ io = of_iomap(pnp, 0);
+ if (!io)
+ goto eth_fixup_no_map;
+
+ /* ensure port clock is not gated to not hang CPU */
+ clk_prepare_enable(clk);
+
+ /* store MAC address register contents in local-mac-address */
+ pr_err(FW_INFO "%s: local-mac-address is not set\n",
+ np->full_name);
+
+ pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+ if (!pmac)
+ goto eth_fixup_no_mem;
+
+ pmac->value = pmac + 1;
+ pmac->length = 6;
+ pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (!pmac->name) {
+ kfree(pmac);
+ goto eth_fixup_no_mem;
+ }
+
+ macaddr = pmac->value;
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+ macaddr[0] = (reg >> 24) & 0xff;
+ macaddr[1] = (reg >> 16) & 0xff;
+ macaddr[2] = (reg >> 8) & 0xff;
+ macaddr[3] = reg & 0xff;
+
+ reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+ macaddr[4] = (reg >> 8) & 0xff;
+ macaddr[5] = reg & 0xff;
+
+ of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+ iounmap(io);
+ clk_disable_unprepare(clk);
+eth_fixup_no_map:
+ clk_put(clk);
+eth_fixup_skip:
+ of_node_put(pnp);
+ }
+}
+
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+void kirkwood_disable_mbus_error_propagation(void)
+{
+ void __iomem *cpu_config;
+
+ cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+ writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+}
+
+static struct of_dev_auxdata auxdata[] __initdata = {
+ OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
+ "mvebu-audio", NULL),
+ { /* sentinel */ }
+};
+
+static void __init kirkwood_dt_init(void)
+{
+ kirkwood_disable_mbus_error_propagation();
+
+ BUG_ON(mvebu_mbus_dt_init());
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+ feroceon_of_init();
+#endif
+ kirkwood_cpufreq_init();
+ kirkwood_cpuidle_init();
+
+ kirkwood_pm_init();
+ kirkwood_dt_eth_fixup();
+
+ if (of_machine_is_compatible("hp,t5325"))
+ t5325_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] = {
+ "marvell,kirkwood",
+ NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+ /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+ .init_machine = kirkwood_dt_init,
+ .restart = mvebu_restart,
+ .dt_compat = kirkwood_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h
new file mode 100644
index 0000000..89f3d1f
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-mvebu/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
+
+#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP 0x00000004
+
+#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
+#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x0118)
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
index f3b325f..f3d4cf5 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -38,6 +38,7 @@
static const struct of_device_id mvebu_pcie_of_match_table[] = {
{ .compatible = "marvell,armada-xp-pcie", },
{ .compatible = "marvell,armada-370-pcie", },
+ { .compatible = "marvell,kirkwood-pcie" },
{},
};
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index a7fb89a..614ba68 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -1,5 +1,5 @@
/*
- * System controller support for Armada 370 and XP platforms.
+ * System controller support for Armada 370, 375 and XP platforms.
*
* Copyright (C) 2012 Marvell
*
@@ -11,7 +11,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
- * The Armada 370 and Armada XP SoCs both have a range of
+ * The Armada 370, 375 and Armada XP SoCs have a range of
* miscellaneous registers, that do not belong to a particular device,
* but rather provide system-level features. This basic
* system-controller driver provides a device tree binding for those
@@ -47,6 +47,13 @@
.system_soft_reset = 0x1,
};
+static const struct mvebu_system_controller armada_375_system_controller = {
+ .rstoutn_mask_offset = 0x54,
+ .system_soft_reset_offset = 0x58,
+ .rstoutn_mask_reset_out_en = 0x1,
+ .system_soft_reset = 0x1,
+};
+
static const struct mvebu_system_controller orion_system_controller = {
.rstoutn_mask_offset = 0x108,
.system_soft_reset_offset = 0x10c,
@@ -54,13 +61,16 @@
.system_soft_reset = 0x1,
};
-static struct of_device_id of_system_controller_table[] = {
+static const struct of_device_id of_system_controller_table[] = {
{
.compatible = "marvell,orion-system-controller",
.data = (void *) &orion_system_controller,
}, {
.compatible = "marvell,armada-370-xp-system-controller",
.data = (void *) &armada_370_xp_system_controller,
+ }, {
+ .compatible = "marvell,armada-375-system-controller",
+ .data = (void *) &armada_375_system_controller,
},
{ /* end of list */ },
};
@@ -90,13 +100,12 @@
static int __init mvebu_system_controller_init(void)
{
+ const struct of_device_id *match;
struct device_node *np;
- np = of_find_matching_node(NULL, of_system_controller_table);
+ np = of_find_matching_node_and_match(NULL, of_system_controller_table,
+ &match);
if (np) {
- const struct of_device_id *match =
- of_match_node(of_system_controller_table, np);
- BUG_ON(!match);
system_controller_base = of_iomap(np, 0);
mvebu_sc = (struct mvebu_system_controller *)match->data;
of_node_put(np);
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 1dc5acd..2e7cec8 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -157,6 +157,8 @@
OUI_FSL,
OUI_DENX,
OUI_CRYSTALFONTZ,
+ OUI_I2SE,
+ OUI_ARMADEUS,
};
static void __init update_fec_mac_prop(enum mac_oui oui)
@@ -211,6 +213,16 @@
macaddr[1] = 0xb9;
macaddr[2] = 0xe1;
break;
+ case OUI_I2SE:
+ macaddr[0] = 0x00;
+ macaddr[1] = 0x01;
+ macaddr[2] = 0x87;
+ break;
+ case OUI_ARMADEUS:
+ macaddr[0] = 0x00;
+ macaddr[1] = 0x1e;
+ macaddr[2] = 0xac;
+ break;
}
val = ocotp[i];
macaddr[3] = (val >> 16) & 0xff;
@@ -236,6 +248,11 @@
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
+static void __init imx28_apf28_init(void)
+{
+ update_fec_mac_prop(OUI_ARMADEUS);
+}
+
static int apx4devkit_phy_fixup(struct phy_device *phy)
{
phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
@@ -330,6 +347,11 @@
update_fec_mac_prop(OUI_CRYSTALFONTZ);
}
+static void __init duckbill_init(void)
+{
+ update_fec_mac_prop(OUI_I2SE);
+}
+
static void __init m28cu3_init(void)
{
update_fec_mac_prop(OUI_DENX);
@@ -426,6 +448,11 @@
return 0;
}
+static void __init eukrea_mbmx283lc_init(void)
+{
+ mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+}
+
static void __init mxs_machine_init(void)
{
struct device_node *root;
@@ -458,10 +485,16 @@
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_init();
+ if (of_machine_is_compatible("armadeus,imx28-apf28"))
+ imx28_apf28_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
else if (of_machine_is_compatible("crystalfontz,cfa10036"))
crystalfontz_init();
+ else if (of_machine_is_compatible("eukrea,mbmx283lc"))
+ eukrea_mbmx283lc_init();
+ else if (of_machine_is_compatible("i2se,duckbill"))
+ duckbill_init();
else if (of_machine_is_compatible("msr,m28cu3"))
m28cu3_init();
diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h
deleted file mode 100644
index 1120dd0..0000000
--- a/arch/arm/mach-netx/include/mach/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/timex.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE 100000000
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 6df42e6..e234601 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -28,6 +28,9 @@
#include <asm/mach/time.h>
#include <mach/netx-regs.h>
+#define NETX_CLOCK_FREQ 100000000
+#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ)
+
#define TIMER_CLOCKEVENT 0
#define TIMER_CLOCKSOURCE 1
@@ -41,7 +44,7 @@
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
+ writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
NETX_GPIO_COUNTER_CTRL_IRQ_EN |
NETX_GPIO_COUNTER_CTRL_RUN;
@@ -114,7 +117,7 @@
/* Reset the timer value to zero */
writel(0, NETX_GPIO_COUNTER_CURRENT(0));
- writel(LATCH, NETX_GPIO_COUNTER_MAX(0));
+ writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0));
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
@@ -137,11 +140,11 @@
NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
- "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
+ "netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up);
/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
* Adding some safety ... */
netx_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE,
+ clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ,
0xa00, 0xfffffffe);
}
diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h
deleted file mode 100644
index 4793790..0000000
--- a/arch/arm/mach-omap1/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/timex.h
- */
-
-#include <plat/timex.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 653b489..e2ce4f8 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -54,7 +54,7 @@
select ARM_GIC
select CPU_V7
select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if LOCAL_TIMERS
+ select HAVE_ARM_TWD if SMP
select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 174caec..4349e82 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -45,24 +45,31 @@
static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
{
- /* support only OMAP3 class */
- if (!cpu_is_omap34xx() && !soc_is_am33xx()) {
- pr_err("BCH ecc is not supported on this CPU\n");
+ /* platforms which support all ECC schemes */
+ if (soc_is_am33xx() || cpu_is_omap44xx() ||
+ soc_is_omap54xx() || soc_is_dra7xx())
+ return 1;
+
+ /* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
+ * which require H/W based ECC error detection */
+ if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
+ ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
+ (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
return 0;
- }
/*
* For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
* and AM33xx derivates. Other chips may be added if confirmed to work.
*/
- if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
- (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)) &&
- (!soc_is_am33xx())) {
- pr_err("BCH 4-bit mode is not supported on this CPU\n");
+ if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) &&
+ (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)))
return 0;
- }
- return 1;
+ /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
+ if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
+ return 1;
+ else
+ return 0;
}
/* This function will go away once the device-tree convertion is complete */
@@ -133,8 +140,10 @@
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
- if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
+ if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
+ dev_err(dev, "Unsupported NAND ECC scheme selected\n");
return -EINVAL;
+ }
err = platform_device_register(&gpmc_nand_device);
if (err < 0) {
diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h
deleted file mode 100644
index de9f8fc..0000000
--- a/arch/arm/mach-omap2/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/timex.h
- */
-
-#include <plat/timex.h>
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 3d5b24d..9723886 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -31,20 +31,6 @@
struct of_dev_auxdata omap_auxdata_lookup[];
static struct twl4030_gpio_platform_data twl_gpio_auxdata;
-/*
- * Create alias for USB host PHY clock.
- * Remove this when clock phandle can be provided via DT
- */
-static void __init __used legacy_init_ehci_clk(char *clkname)
-{
- int ret;
-
- ret = clk_add_alias("main_clk", NULL, clkname, NULL);
- if (ret)
- pr_err("%s:Failed to add main_clk alias to %s :%d\n",
- __func__, clkname, ret);
-}
-
#if IS_ENABLED(CONFIG_WL12XX)
static struct wl12xx_platform_data wl12xx __initdata;
@@ -99,7 +85,7 @@
int res;
res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "wlan rst");
+ "wlan pwr");
if (res)
return res;
@@ -108,6 +94,23 @@
return 0;
}
+static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
+{
+ int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
+
+ if (err) {
+ pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
+ hub_name, err);
+ return;
+ }
+
+ gpio_export(gpio, 0);
+
+ udelay(10);
+ gpio_set_value(gpio, 1);
+ msleep(1);
+}
+
static void __init omap3_sbc_t3730_twl_init(void)
{
twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
@@ -115,10 +118,17 @@
static void __init omap3_sbc_t3730_legacy_init(void)
{
+ omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
omap_ads7846_init(1, 57, 0, NULL);
}
+static void __init omap3_sbc_t3530_legacy_init(void)
+{
+ omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
+ omap_ads7846_init(1, 57, 0, NULL);
+}
+
static void __init omap3_igep0020_legacy_init(void)
{
omap3_igep2_display_init_of();
@@ -160,7 +170,7 @@
.interrupt_disable = am35xx_disable_emac_int,
};
-static void __init am3517_evm_legacy_init(void)
+static void __init am35xx_emac_reset(void)
{
u32 v;
@@ -169,6 +179,43 @@
omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
}
+
+static struct gpio cm_t3517_wlan_gpios[] __initdata = {
+ { 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" },
+ { 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
+};
+
+static void __init omap3_sbc_t3517_wifi_init(void)
+{
+ int err = gpio_request_array(cm_t3517_wlan_gpios,
+ ARRAY_SIZE(cm_t3517_wlan_gpios));
+ if (err) {
+ pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
+ return;
+ }
+
+ gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
+ gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
+
+ msleep(100);
+ gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
+}
+
+static void __init omap3_sbc_t3517_legacy_init(void)
+{
+ omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
+ omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
+ am35xx_emac_reset();
+ hsmmc2_internal_input_clk();
+ omap3_sbc_t3517_wifi_init();
+ legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
+ omap_ads7846_init(1, 57, 0, NULL);
+}
+
+static void __init am3517_evm_legacy_init(void)
+{
+ am35xx_emac_reset();
+}
#endif /* CONFIG_ARCH_OMAP3 */
#ifdef CONFIG_ARCH_OMAP4
@@ -182,15 +229,20 @@
static void __init omap4_panda_legacy_init(void)
{
omap4_panda_display_init_of();
- legacy_init_ehci_clk("auxclk3_ck");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
}
#endif
+#ifdef CONFIG_SOC_AM33XX
+static void __init am335x_evmsk_legacy_init(void)
+{
+ legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31);
+}
+#endif
+
#ifdef CONFIG_SOC_OMAP5
static void __init omap5_uevm_legacy_init(void)
{
- legacy_init_ehci_clk("auxclk1_ck");
}
#endif
@@ -258,6 +310,8 @@
*/
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
+ { "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, },
+ { "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
@@ -271,6 +325,9 @@
{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
{ "ti,omap4-panda", omap4_panda_legacy_init, },
#endif
+#ifdef CONFIG_SOC_AM33XX
+ { "ti,am335x-evmsk", am335x_evmsk_legacy_init, },
+#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
deleted file mode 100644
index 4c69820..0000000
--- a/arch/arm/mach-orion5x/include/mach/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/timex.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index c9f309a..8b90c4f 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -30,6 +30,7 @@
#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
+#include <mach/irqs.h>
#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 954641e..1b08259 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -14,6 +14,8 @@
#ifndef ASM_ARCH_BALLOON3_H
#define ASM_ARCH_BALLOON3_H
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
enum balloon3_features {
BALLOON3_FEATURE_OHCI,
BALLOON3_FEATURE_MMC,
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index f3c3493..c030d95 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -13,6 +13,7 @@
#ifndef __ASM_ARCH_CORGI_H
#define __ASM_ARCH_CORGI_H 1
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
/*
* Corgi (Non Standard) GPIO Definitions
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
index 2628e7b..00cfbbb 100644
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -11,6 +11,8 @@
#ifndef CSB726_H
#define CSB726_H
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
#define CSB726_GPIO_IRQ_LAN 52
#define CSB726_GPIO_IRQ_SM501 53
#define CSB726_GPIO_MMC_DETECT 100
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index dba14b6..f7df27b 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
/* BTRESET - Reset line to Bluetooth module, active low signal. */
#define GPIO_GUMSTIX_BTRESET 7
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
index 22a96f8..7e63f46 100644
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -23,6 +23,7 @@
* IDP hardware.
*/
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
#define IDP_FLASH_PHYS (PXA_CS0_PHYS)
#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 2c447133..b184f29 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -13,6 +13,8 @@
#ifndef _INCLUDE_PALMLD_H_
#define _INCLUDE_PALMLD_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 0bd4f03..e342c59 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -15,6 +15,8 @@
#ifndef _INCLUDE_PALMT5_H_
#define _INCLUDE_PALMT5_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index c383a21..81c727b 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -16,6 +16,8 @@
#ifndef _INCLUDE_PALMTC_H_
#define _INCLUDE_PALMTC_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index f2e5303..92bc1f0 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -16,6 +16,8 @@
#ifndef _INCLUDE_PALMTX_H_
#define _INCLUDE_PALMTX_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 6bf28de..86ebd7b 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -23,6 +23,8 @@
* Definitions of CPU card resources only
*/
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/* phyCORE-PXA270 (PCM027) Interrupts */
#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
#define PCM027_BTDET_IRQ PCM027_IRQ(0)
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index 0260aaa..7e544c1 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -20,6 +20,7 @@
*/
#include <mach/pcm027.h>
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
/*
* definitions relevant only when the PCM-990
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index f32ff75..b56b193 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -15,6 +15,8 @@
#ifndef __ASM_ARCH_POODLE_H
#define __ASM_ARCH_POODLE_H 1
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/*
* GPIOs
*/
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 0bfe650..25c9f62 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -15,8 +15,8 @@
#define __ASM_ARCH_SPITZ_H 1
#endif
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */
#include <linux/fb.h>
-#include <linux/gpio.h>
/* Spitz/Akita GPIOs */
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
deleted file mode 100644
index af6760a..0000000
--- a/arch/arm/mach-pxa/include/mach/timex.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/timex.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* Various drivers are still using the constant of CLOCK_TICK_RATE, for
- * those drivers to at least work, the definition is provided here.
- *
- * NOTE: this is no longer accurate when multiple processors and boards
- * are selected, newer drivers should not depend on this any more. Use
- * either the clocksource/clockevent or get this at run-time by calling
- * get_clock_tick_rate() (as defined in generic.c).
- */
-
-#if defined(CONFIG_PXA25x)
-/* PXA250/210 timer base */
-#define CLOCK_TICK_RATE 3686400
-#elif defined(CONFIG_PXA27x)
-/* PXA27x timer base */
-#ifdef CONFIG_MACH_MAINSTONE
-#define CLOCK_TICK_RATE 3249600
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 2bb0e86..0497d95 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -13,6 +13,8 @@
#ifndef _ASM_ARCH_TOSA_H_
#define _ASM_ARCH_TOSA_H_ 1
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
/* TOSA Chip selects */
#define TOSA_LCDC_PHYS PXA_CS4_PHYS
/* Internel Scoop */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index d2ca010..ae3ca01 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -10,6 +10,8 @@
#ifndef _TRIPEPS4_H_
#define _TRIPEPS4_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/* physical memory regions */
#define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
#define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
new file mode 100644
index 0000000..a028be2
--- /dev/null
+++ b/arch/arm/mach-qcom/Kconfig
@@ -0,0 +1,33 @@
+config ARCH_QCOM
+ bool "Qualcomm Support" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_GIC
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select HAVE_SMP
+ select QCOM_SCM if SMP
+ help
+ Support for Qualcomm's devicetree based systems.
+
+if ARCH_QCOM
+
+menu "Qualcomm SoC Selection"
+
+config ARCH_MSM8X60
+ bool "Enable support for MSM8X60"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8960
+ bool "Enable support for MSM8960"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8974
+ bool "Enable support for MSM8974"
+ select HAVE_ARM_ARCH_TIMER
+
+endmenu
+
+config QCOM_SCM
+ bool
+
+endif
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
new file mode 100644
index 0000000..8f756ae
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile
@@ -0,0 +1,5 @@
+obj-y := board.o
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
+
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-qcom/board.c
similarity index 68%
rename from arch/arm/mach-msm/board-dt.c
rename to arch/arm/mach-qcom/board.c
index 1f11d93..830f69c 100644
--- a/arch/arm/mach-msm/board-dt.c
+++ b/arch/arm/mach-qcom/board.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -17,10 +17,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "common.h"
+extern struct smp_operations qcom_smp_ops;
-static const char * const msm_dt_match[] __initconst = {
- "qcom,msm8660-fluid",
+static const char * const qcom_dt_match[] __initconst = {
"qcom,msm8660-surf",
"qcom,msm8960-cdp",
NULL
@@ -31,11 +30,11 @@
NULL
};
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
- .smp = smp_ops(msm_smp_ops),
- .dt_compat = msm_dt_match,
+DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
+ .smp = smp_ops(qcom_smp_ops),
+ .dt_compat = qcom_dt_match,
MACHINE_END
-DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
+DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)")
.dt_compat = apq8074_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-qcom/platsmp.c
similarity index 65%
rename from arch/arm/mach-msm/platsmp.c
rename to arch/arm/mach-qcom/platsmp.c
index f10a1f5..9c53ea7 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -2,6 +2,7 @@
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,42 +13,38 @@
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <asm/cacheflush.h>
#include <asm/cputype.h>
-#include <asm/mach-types.h>
#include <asm/smp_plat.h>
#include "scm-boot.h"
-#include "common.h"
#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
#define SCSS_CPU1CORE_RESET 0xD80
#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-extern void msm_secondary_startup(void);
+extern void secondary_startup(void);
static DEFINE_SPINLOCK(boot_lock);
+#ifdef CONFIG_HOTPLUG_CPU
+static void __ref qcom_cpu_die(unsigned int cpu)
+{
+ wfi();
+}
+#endif
+
static inline int get_core_count(void)
{
/* 1 + the PART[1:0] field of MIDR */
return ((read_cpuid_id() >> 4) & 3) + 1;
}
-static void msm_secondary_init(unsigned int cpu)
+static void qcom_secondary_init(unsigned int cpu)
{
/*
- * let the primary processor know we're out of the
- * pen, then head off into the C entry point
- */
- pen_release = -1;
- smp_wmb();
-
- /*
* Synchronise with the boot thread.
*/
spin_lock(&boot_lock);
@@ -57,7 +54,7 @@
static void prepare_cold_cpu(unsigned int cpu)
{
int ret;
- ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
+ ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
SCM_FLAG_COLDBOOT_CPU1);
if (ret == 0) {
void __iomem *sc1_base_ptr;
@@ -73,9 +70,8 @@
"address\n");
}
-static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int qcom_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- unsigned long timeout;
static int cold_boot_done;
/* Only need to bring cpu out of reset this way once */
@@ -91,39 +87,19 @@
spin_lock(&boot_lock);
/*
- * The secondary processor is waiting to be released from
- * the holding pen - release it, then wait for it to flag
- * that it has been released by resetting pen_release.
- *
- * Note that "pen_release" is the hardware CPU ID, whereas
- * "cpu" is Linux's internal ID.
- */
- pen_release = cpu_logical_map(cpu);
- sync_cache_w(&pen_release);
-
- /*
* Send the secondary CPU a soft interrupt, thereby causing
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- smp_rmb();
- if (pen_release == -1)
- break;
-
- udelay(10);
- }
-
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
- return pen_release != -1 ? -ENOSYS : 0;
+ return 0;
}
/*
@@ -132,7 +108,7 @@
* does not support the ARM SCU, so just set the possible cpu mask to
* NR_CPUS.
*/
-static void __init msm_smp_init_cpus(void)
+static void __init qcom_smp_init_cpus(void)
{
unsigned int i, ncores = get_core_count();
@@ -146,16 +122,16 @@
set_cpu_possible(i, true);
}
-static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
+static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
{
}
-struct smp_operations msm_smp_ops __initdata = {
- .smp_init_cpus = msm_smp_init_cpus,
- .smp_prepare_cpus = msm_smp_prepare_cpus,
- .smp_secondary_init = msm_secondary_init,
- .smp_boot_secondary = msm_boot_secondary,
+struct smp_operations qcom_smp_ops __initdata = {
+ .smp_init_cpus = qcom_smp_init_cpus,
+ .smp_prepare_cpus = qcom_smp_prepare_cpus,
+ .smp_secondary_init = qcom_secondary_init,
+ .smp_boot_secondary = qcom_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = msm_cpu_die,
+ .cpu_die = qcom_cpu_die,
#endif
};
diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c
similarity index 100%
rename from arch/arm/mach-msm/scm-boot.c
rename to arch/arm/mach-qcom/scm-boot.c
diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
similarity index 100%
rename from arch/arm/mach-msm/scm-boot.h
rename to arch/arm/mach-qcom/scm-boot.h
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-qcom/scm.c
similarity index 100%
rename from arch/arm/mach-msm/scm.c
rename to arch/arm/mach-qcom/scm.c
diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-qcom/scm.h
similarity index 100%
rename from arch/arm/mach-msm/scm.h
rename to arch/arm/mach-qcom/scm.h
diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h
deleted file mode 100644
index 4eeb069..0000000
--- a/arch/arm/mach-realview/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/timex.h
- *
- * RealView architecture timex specifications
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h
deleted file mode 100644
index dd75e73..0000000
--- a/arch/arm/mach-rpc/include/mach/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-rpc/include/mach/timex.h
- *
- * Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * RiscPC architecture timex specifications
- */
-
-/*
- * On the RiscPC, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE 2000000
-
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 9a6def1..99363ae 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -24,6 +24,9 @@
#include <asm/mach/time.h>
+#define RPC_CLOCK_FREQ 2000000
+#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
+
static u32 ioc_timer_gettimeoffset(void)
{
unsigned int count1, count2, status;
@@ -46,23 +49,23 @@
* and count2.
*/
if (status & (1 << 5))
- offset -= LATCH;
+ offset -= RPC_LATCH;
} else if (count2 > count1) {
/*
* We have just had another interrupt between reading
* count1 and count2.
*/
- offset -= LATCH;
+ offset -= RPC_LATCH;
}
- offset = (LATCH - offset) * (tick_nsec / 1000);
- return ((offset + LATCH/2) / LATCH) * 1000;
+ offset = (RPC_LATCH - offset) * (tick_nsec / 1000);
+ return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000;
}
void __init ioctime_init(void)
{
- ioc_writeb(LATCH & 255, IOC_T0LTCHL);
- ioc_writeb(LATCH >> 8, IOC_T0LTCHH);
+ ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
+ ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH);
ioc_writeb(0, IOC_T0GO);
}
diff --git a/arch/arm/mach-s3c24xx/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h
deleted file mode 100644
index fe9ca1f..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h
deleted file mode 100644
index fb2e8cd..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h
deleted file mode 100644
index 4b91faa..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/timex.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S5P64X0 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h
deleted file mode 100644
index 47ffb17..0000000
--- a/arch/arm/mach-s5pc100/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h
deleted file mode 100644
index 73dc854..0000000
--- a/arch/arm/mach-s5pv210/include/mach/timex.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/timex.h
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * S5PV210 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H __FILE__
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
deleted file mode 100644
index 7a5d017..0000000
--- a/arch/arm/mach-sa1100/include/mach/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/timex.h
- *
- * SA1100 architecture timex specifications
- *
- * Copyright (C) 1998
- */
-
-/*
- * SA1100 timer
- */
-#define CLOCK_TICK_RATE 3686400
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 6fd4acb..7aaac00 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -9,6 +9,7 @@
*
*/
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -20,6 +21,9 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
+#define SA1100_CLOCK_FREQ 3686400
+#define SA1100_LATCH DIV_ROUND_CLOSEST(SA1100_CLOCK_FREQ, HZ)
+
static u64 notrace sa1100_read_sched_clock(void)
{
return readl_relaxed(OSCR);
@@ -93,7 +97,7 @@
/*
* OSMR0 is the system timer: make sure OSCR is sufficiently behind
*/
- writel_relaxed(OSMR0 - LATCH, OSCR);
+ writel_relaxed(OSMR0 - SA1100_LATCH, OSCR);
}
#else
#define sa1100_timer_suspend NULL
@@ -128,7 +132,7 @@
setup_irq(IRQ_OST0, &sa1100_timer_irq);
- clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
+ clocksource_mmio_init(OSCR, "oscr", SA1100_CLOCK_FREQ, 200, 32,
clocksource_mmio_readl_up);
clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400,
MIN_OSCR_DELTA * 2, 0x7fffffff);
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3386406..05fa505 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -8,7 +8,7 @@
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if LOCAL_TIMERS
+ select HAVE_ARM_TWD if SMP
select HAVE_SMP
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h
deleted file mode 100644
index ae0d8d8..0000000
--- a/arch/arm/mach-shmobile/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_MACH_TIMEX_H
-#define __ASM_MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE 1193180 /* unused i8253 PIT value */
-
-#endif /* __ASM_MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear/include/mach/timex.h b/arch/arm/mach-spear/include/mach/timex.h
deleted file mode 100644
index ef95e5b..0000000
--- a/arch/arm/mach-spear/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/timex.h
- *
- * SPEAr platform specific timex definitions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_TIMEX_H
-#define __PLAT_TIMEX_H
-
-#define CLOCK_TICK_RATE 48000000
-
-#endif /* __PLAT_TIMEX_H */
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 0034d2c..b2019dc 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -73,11 +73,6 @@
a working kernel. If everything else is disabled, this
automatically enables MACH_MOP500.
-config MACH_UX500_DT
- bool "Generic U8500 support using device tree"
- depends on MACH_MOP500
- select USE_OF
-
endmenu
config UX500_DEBUG_UART
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index d05ba75..de544aa 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -7,7 +7,6 @@
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
obj-$(CONFIG_MACH_MOP500) += board-mop500-sdi.o \
board-mop500-regulators.o \
- board-mop500-pins.o \
board-mop500-audio.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 9309ad4..b2a0899 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -9,7 +9,6 @@
#include <linux/gpio.h>
#include <linux/platform_data/dma-ste-dma40.h>
-#include "irqs.h"
#include <linux/platform_data/asoc-ux500-msp.h>
#include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
deleted file mode 100644
index f63619b..0000000
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-#include <linux/string.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-
-#include <asm/mach-types.h>
-
-#include "board-mop500.h"
-
-/* These simply sets bias for pins */
-#define BIAS(a,b) static unsigned long a[] = { b }
-
-BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
-BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
-BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
-
-#define AB8500_MUX_HOG(group, func) \
- PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func)
-#define AB8500_PIN_HOG(pin, conf) \
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8500.0", pin, abx500_##conf)
-
-#define AB8500_MUX_STATE(group, func, dev, state) \
- PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8500.0", group, func)
-#define AB8500_PIN_STATE(pin, conf, dev, state) \
- PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8500.0", pin, abx500_##conf)
-
-#define AB8505_MUX_HOG(group, func) \
- PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8505.0", group, func)
-#define AB8505_PIN_HOG(pin, conf) \
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8505.0", pin, abx500_##conf)
-
-#define AB8505_MUX_STATE(group, func, dev, state) \
- PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8505.0", group, func)
-#define AB8505_PIN_STATE(pin, conf, dev, state) \
- PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8505.0", pin, abx500_##conf)
-
-static struct pinctrl_map __initdata ab8500_pinmap[] = {
- /* Sysclkreq2 */
- AB8500_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.35", PINCTRL_STATE_DEFAULT),
- AB8500_PIN_STATE("GPIO1_T10", in_nopull, "regulator.35", PINCTRL_STATE_DEFAULT),
- /* sysclkreq2 disable, mux in gpio configured in input pulldown */
- AB8500_MUX_STATE("gpio1_a_1", "gpio", "regulator.35", PINCTRL_STATE_SLEEP),
- AB8500_PIN_STATE("GPIO1_T10", in_pd, "regulator.35", PINCTRL_STATE_SLEEP),
-
- /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
- AB8500_MUX_HOG("gpio2_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO2_T9", in_pd),
-
- /* Sysclkreq4 */
- AB8500_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
- AB8500_PIN_STATE("GPIO3_U9", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
- /* sysclkreq4 disable, mux in gpio configured in input pulldown */
- AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
- AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
-
- /* pins 4 is muxed in GPIO, configured in INPUT PULL DOWN */
- AB8500_MUX_HOG("gpio4_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO4_W2", in_pd),
-
- /*
- * pins 6,7,8 and 9 are muxed in YCBCR0123
- * configured in INPUT PULL UP
- */
- AB8500_MUX_HOG("ycbcr0123_d_1", "ycbcr"),
- AB8500_PIN_HOG("GPIO6_Y18", in_nopull),
- AB8500_PIN_HOG("GPIO7_AA20", in_nopull),
- AB8500_PIN_HOG("GPIO8_W18", in_nopull),
- AB8500_PIN_HOG("GPIO9_AA19", in_nopull),
-
- /*
- * pins 10,11,12 and 13 are muxed in GPIO
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio10_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO10_U17", in_pd),
-
- AB8500_MUX_HOG("gpio11_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO11_AA18", in_pd),
-
- AB8500_MUX_HOG("gpio12_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO12_U16", in_pd),
-
- AB8500_MUX_HOG("gpio13_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO13_W17", in_pd),
-
- /*
- * pins 14,15 are muxed in PWM1 and PWM2
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("pwmout1_d_1", "pwmout"),
- AB8500_PIN_HOG("GPIO14_F14", in_pd),
-
- AB8500_MUX_HOG("pwmout2_d_1", "pwmout"),
- AB8500_PIN_HOG("GPIO15_B17", in_pd),
-
- /*
- * pins 16 is muxed in GPIO
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio16_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO14_F14", in_pd),
-
- /*
- * pins 17,18,19 and 20 are muxed in AUDIO interface 1
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("adi1_d_1", "adi1"),
- AB8500_PIN_HOG("GPIO17_P5", in_pd),
- AB8500_PIN_HOG("GPIO18_R5", in_pd),
- AB8500_PIN_HOG("GPIO19_U5", in_pd),
- AB8500_PIN_HOG("GPIO20_T5", in_pd),
-
- /*
- * pins 21,22 and 23 are muxed in USB UICC
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("usbuicc_d_1", "usbuicc"),
- AB8500_PIN_HOG("GPIO21_H19", in_pd),
- AB8500_PIN_HOG("GPIO22_G20", in_pd),
- AB8500_PIN_HOG("GPIO23_G19", in_pd),
-
- /*
- * pins 24,25 are muxed in GPIO
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio24_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO24_T14", in_pd),
-
- AB8500_MUX_HOG("gpio25_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO25_R16", in_pd),
-
- /*
- * pins 26 is muxed in GPIO
- * configured in OUTPUT LOW
- */
- AB8500_MUX_HOG("gpio26_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO26_M16", out_lo),
-
- /*
- * pins 27,28 are muxed in DMIC12
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("dmic12_d_1", "dmic"),
- AB8500_PIN_HOG("GPIO27_J6", in_pd),
- AB8500_PIN_HOG("GPIO28_K6", in_pd),
-
- /*
- * pins 29,30 are muxed in DMIC34
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("dmic34_d_1", "dmic"),
- AB8500_PIN_HOG("GPIO29_G6", in_pd),
- AB8500_PIN_HOG("GPIO30_H6", in_pd),
-
- /*
- * pins 31,32 are muxed in DMIC56
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("dmic56_d_1", "dmic"),
- AB8500_PIN_HOG("GPIO31_F5", in_pd),
- AB8500_PIN_HOG("GPIO32_G5", in_pd),
-
- /*
- * pins 34 is muxed in EXTCPENA
- * configured INPUT PULL DOWN
- */
- AB8500_MUX_HOG("extcpena_d_1", "extcpena"),
- AB8500_PIN_HOG("GPIO34_R17", in_pd),
-
- /*
- * pins 35 is muxed in GPIO
- * configured in OUTPUT LOW
- */
- AB8500_MUX_HOG("gpio35_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO35_W15", in_pd),
-
- /*
- * pins 36,37,38 and 39 are muxed in GPIO
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio36_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO36_A17", in_pd),
-
- AB8500_MUX_HOG("gpio37_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO37_E15", in_pd),
-
- AB8500_MUX_HOG("gpio38_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO38_C17", in_pd),
-
- AB8500_MUX_HOG("gpio39_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO39_E16", in_pd),
-
- /*
- * pins 40 and 41 are muxed in MODCSLSDA
- * configured INPUT PULL DOWN
- */
- AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"),
- AB8500_PIN_HOG("GPIO40_T19", in_pd),
- AB8500_PIN_HOG("GPIO41_U19", in_pd),
-
- /*
- * pins 42 is muxed in GPIO
- * configured INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio42_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO42_U2", in_pd),
-};
-
-static struct pinctrl_map __initdata ab8505_pinmap[] = {
- /* Sysclkreq2 */
- AB8505_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
- AB8505_PIN_STATE("GPIO1_N4", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
- /* sysclkreq2 disable, mux in gpio configured in input pulldown */
- AB8505_MUX_STATE("gpio1_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
- AB8505_PIN_STATE("GPIO1_N4", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
-
- /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
- AB8505_MUX_HOG("gpio2_a_1", "gpio"),
- AB8505_PIN_HOG("GPIO2_R5", in_pd),
-
- /* Sysclkreq4 */
- AB8505_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.37", PINCTRL_STATE_DEFAULT),
- AB8505_PIN_STATE("GPIO3_P5", in_nopull, "regulator.37", PINCTRL_STATE_DEFAULT),
- /* sysclkreq4 disable, mux in gpio configured in input pulldown */
- AB8505_MUX_STATE("gpio3_a_1", "gpio", "regulator.37", PINCTRL_STATE_SLEEP),
- AB8505_PIN_STATE("GPIO3_P5", in_pd, "regulator.37", PINCTRL_STATE_SLEEP),
-
- AB8505_MUX_HOG("gpio10_d_1", "gpio"),
- AB8505_PIN_HOG("GPIO10_B16", in_pd),
-
- AB8505_MUX_HOG("gpio11_d_1", "gpio"),
- AB8505_PIN_HOG("GPIO11_B17", in_pd),
-
- AB8505_MUX_HOG("gpio13_d_1", "gpio"),
- AB8505_PIN_HOG("GPIO13_D17", in_nopull),
-
- AB8505_MUX_HOG("pwmout1_d_1", "pwmout"),
- AB8505_PIN_HOG("GPIO14_C16", in_pd),
-
- AB8505_MUX_HOG("adi2_d_1", "adi2"),
- AB8505_PIN_HOG("GPIO17_P2", in_pd),
- AB8505_PIN_HOG("GPIO18_N3", in_pd),
- AB8505_PIN_HOG("GPIO19_T1", in_pd),
- AB8505_PIN_HOG("GPIO20_P3", in_pd),
-
- AB8505_MUX_HOG("gpio34_a_1", "gpio"),
- AB8505_PIN_HOG("GPIO34_H14", in_pd),
-
- AB8505_MUX_HOG("modsclsda_d_1", "modsclsda"),
- AB8505_PIN_HOG("GPIO40_J15", in_pd),
- AB8505_PIN_HOG("GPIO41_J14", in_pd),
-
- AB8505_MUX_HOG("gpio50_d_1", "gpio"),
- AB8505_PIN_HOG("GPIO50_L4", in_nopull),
-
- AB8505_MUX_HOG("resethw_d_1", "resethw"),
- AB8505_PIN_HOG("GPIO52_D16", in_pd),
-
- AB8505_MUX_HOG("service_d_1", "service"),
- AB8505_PIN_HOG("GPIO53_D15", in_pd),
-};
-
-void __init mop500_pinmaps_init(void)
-{
- if (machine_is_u8520())
- pinctrl_register_mappings(ab8505_pinmap,
- ARRAY_SIZE(ab8505_pinmap));
- else
- pinctrl_register_mappings(ab8500_pinmap,
- ARRAY_SIZE(ab8500_pinmap));
-}
-
-void __init snowball_pinmaps_init(void)
-{
- pinctrl_register_mappings(ab8500_pinmap,
- ARRAY_SIZE(ab8500_pinmap));
-}
-
-void __init hrefv60_pinmaps_init(void)
-{
- pinctrl_register_mappings(ab8500_pinmap,
- ARRAY_SIZE(ab8500_pinmap));
-}
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index d48e866..32cc0d8 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,78 +7,9 @@
#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H
-/* For NOMADIK_NR_GPIO */
-#include "irqs.h"
#include <linux/platform_data/asoc-ux500-msp.h>
#include <linux/amba/mmci.h>
-/* Snowball specific GPIO assignments, this board has no GPIO expander */
-#define SNOWBALL_ACCEL_INT1_GPIO 163
-#define SNOWBALL_ACCEL_INT2_GPIO 164
-#define SNOWBALL_MAGNET_DRDY_GPIO 165
-#define SNOWBALL_SDMMC_EN_GPIO 217
-#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
-#define SNOWBALL_SDMMC_CD_GPIO 218
-
-/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
-#define HREFV60_SDMMC_1V8_3V_GPIO 5
-#define HREFV60_CAMERA_FLASH_ENABLE 21
-#define HREFV60_MAGNET_DRDY_GPIO 32
-#define HREFV60_DISP1_RST_GPIO 65
-#define HREFV60_DISP2_RST_GPIO 66
-#define HREFV60_ACCEL_INT1_GPIO 82
-#define HREFV60_ACCEL_INT2_GPIO 83
-#define HREFV60_SDMMC_CD_GPIO 95
-#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
-#define HREFV60_TOUCH_RST_GPIO 143
-#define HREFV60_HAL_SW_GPIO 145
-#define HREFV60_SDMMC_EN_GPIO 169
-#define HREFV60_MMIO_XENON_CHARGE 170
-#define HREFV60_PROX_SENSE_GPIO 217
-
-/* MOP500 generic GPIOs */
-#define CAMERA_FLASH_INT_PIN 7
-#define CYPRESS_TOUCH_INT_PIN 84
-#define XSHUTDOWN_PRIMARY_SENSOR 141
-#define XSHUTDOWN_SECONDARY_SENSOR 142
-#define CYPRESS_TOUCH_RST_GPIO 143
-#define MOP500_HDMI_RST_GPIO 196
-#define CYPRESS_SLAVE_SELECT_GPIO 216
-
-/* GPIOs on the TC35892 expander */
-#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
-#define GPIO_MAGNET_DRDY MOP500_EGPIO(1)
-#define GPIO_SDMMC_CD MOP500_EGPIO(3)
-#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4)
-#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5)
-#define GPIO_PROX_SENSOR MOP500_EGPIO(7)
-#define GPIO_HAL_SENSOR MOP500_EGPIO(8)
-#define GPIO_ACCEL_INT1 MOP500_EGPIO(10)
-#define GPIO_ACCEL_INT2 MOP500_EGPIO(11)
-#define GPIO_BU21013_CS MOP500_EGPIO(13)
-#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14)
-#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15)
-#define GPIO_SDMMC_EN MOP500_EGPIO(17)
-#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
-#define MOP500_EGPIO_END MOP500_EGPIO(24)
-
-/*
- * GPIOs on the AB8500 mixed-signals circuit
- * Notice that we subtract 1 from the number passed into the macro, this is
- * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
- * parens matches the GPIO pin number in the data sheet.
- */
-#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
-/*Snowball AB8500 GPIO */
-#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */
-#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
-#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */
-#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */
-#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */
-#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */
-#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */
-
-struct device;
extern struct mmci_platform_data mop500_sdi0_data;
extern struct mmci_platform_data mop500_sdi1_data;
extern struct mmci_platform_data mop500_sdi2_data;
@@ -88,8 +19,4 @@
extern struct msp_i2s_platform_data msp2_platform_data;
extern struct msp_i2s_platform_data msp3_platform_data;
-void __init mop500_pinmaps_init(void);
-void __init snowball_pinmaps_init(void);
-void __init hrefv60_pinmaps_init(void);
-
#endif
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index bc8a618..8820f60 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -27,7 +27,6 @@
#include <asm/mach/map.h>
#include "setup.h"
-#include "irqs.h"
#include "board-mop500-regulators.h"
#include "board-mop500.h"
@@ -35,14 +34,11 @@
#include "id.h"
struct ab8500_platform_data ab8500_platdata = {
- .irq_base = MOP500_AB8500_IRQ_BASE,
.regulator = &ab8500_regulator_plat_data,
};
struct prcmu_pdata db8500_prcmu_pdata = {
.ab_platdata = &ab8500_platdata,
- .ab_irq = IRQ_DB8500_AB8500,
- .irq_base = IRQ_PRCMU_BASE,
.version_offset = DB8500_PRCMU_FW_VERSION_OFFSET,
.legacy_offset = DB8500_PRCMU_LEGACY_OFFSET,
};
@@ -146,7 +142,6 @@
return ux500_soc_device_init(soc_id);
}
-#ifdef CONFIG_MACH_UX500_DT
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
@@ -191,16 +186,6 @@
{
struct device *parent = db8500_soc_device_init();
- /* Pinmaps must be in place before devices register */
- if (of_machine_is_compatible("st-ericsson,mop500"))
- mop500_pinmaps_init();
- else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
- snowball_pinmaps_init();
- } else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
- hrefv60_pinmaps_init();
- else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
- /* TODO: Add pinmaps for ccu9540 board. */
-
/* automatically probe child nodes of dbx5x0 devices */
if (of_machine_is_compatible("st-ericsson,u8540"))
of_platform_populate(NULL, u8500_local_bus_nodes,
@@ -229,5 +214,3 @@
.dt_compat = stericsson_dt_platform_compat,
.restart = ux500_restart,
MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d11ac4b..db16b5a 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -52,17 +52,7 @@
*/
void __init ux500_init_irq(void)
{
- void __iomem *dist_base;
- void __iomem *cpu_base;
-
gic_arch_extn.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND;
-
- if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
- dist_base = __io_address(U8500_GIC_DIST_BASE);
- cpu_base = __io_address(U8500_GIC_CPU_BASE);
- } else
- ux500_unknown_soc();
-
irqchip_init();
/*
diff --git a/arch/arm/mach-ux500/irqs-board-mop500.h b/arch/arm/mach-ux500/irqs-board-mop500.h
deleted file mode 100644
index d526dd8..0000000
--- a/arch/arm/mach-ux500/irqs-board-mop500.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_BOARD_MOP500_H
-#define __MACH_IRQS_BOARD_MOP500_H
-
-/* Number of AB8500 irqs is taken from header file */
-#include <linux/mfd/abx500/ab8500.h>
-
-#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START
-#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \
- + AB8500_MAX_NR_IRQS)
-
-/* TC35892 */
-#define TC35892_NR_INTERNAL_IRQS 8
-#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x))
-#define TC35892_NR_GPIOS 24
-#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS)
-
-#define MOP500_EGPIO_NR_IRQS TC35892_NR_IRQS
-
-#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END
-#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \
- + MOP500_EGPIO_NR_IRQS)
-/* STMPE1601 irqs */
-#define STMPE_NR_INTERNAL_IRQS 9
-#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x))
-#define STMPE_NR_GPIOS 24
-#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS)
-
-#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END
-#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x))
-
-#define MOP500_STMPE1601_IRQ_END \
- MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
-
-#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ_END
-
-#define MOP500_IRQ_END MOP500_NR_IRQS
-
-/*
- * We may have several boards, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_BOARD_START remains the same for either board.
- */
-#if MOP500_IRQ_END > IRQ_BOARD_END
-#undef IRQ_BOARD_END
-#define IRQ_BOARD_END MOP500_IRQ_END
-#endif
-
-#endif
diff --git a/arch/arm/mach-ux500/irqs-db8500.h b/arch/arm/mach-ux500/irqs-db8500.h
deleted file mode 100644
index f3a9d59..0000000
--- a/arch/arm/mach-ux500/irqs-db8500.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_DB8500_H
-#define __MACH_IRQS_DB8500_H
-
-#define IRQ_DB8500_MTU0 (IRQ_SHPI_START + 4)
-#define IRQ_DB8500_SPI2 (IRQ_SHPI_START + 6)
-#define IRQ_DB8500_PMU (IRQ_SHPI_START + 7)
-#define IRQ_DB8500_SPI0 (IRQ_SHPI_START + 8)
-#define IRQ_DB8500_RTT (IRQ_SHPI_START + 9)
-#define IRQ_DB8500_PKA (IRQ_SHPI_START + 10)
-#define IRQ_DB8500_UART0 (IRQ_SHPI_START + 11)
-#define IRQ_DB8500_I2C3 (IRQ_SHPI_START + 12)
-#define IRQ_DB8500_L2CC (IRQ_SHPI_START + 13)
-#define IRQ_DB8500_SSP0 (IRQ_SHPI_START + 14)
-#define IRQ_DB8500_CRYP1 (IRQ_SHPI_START + 15)
-#define IRQ_DB8500_MSP1_RX (IRQ_SHPI_START + 16)
-#define IRQ_DB8500_MTU1 (IRQ_SHPI_START + 17)
-#define IRQ_DB8500_RTC (IRQ_SHPI_START + 18)
-#define IRQ_DB8500_UART1 (IRQ_SHPI_START + 19)
-#define IRQ_DB8500_USB_WAKEUP (IRQ_SHPI_START + 20)
-#define IRQ_DB8500_I2C0 (IRQ_SHPI_START + 21)
-#define IRQ_DB8500_I2C1 (IRQ_SHPI_START + 22)
-#define IRQ_DB8500_USBOTG (IRQ_SHPI_START + 23)
-#define IRQ_DB8500_DMA_SECURE (IRQ_SHPI_START + 24)
-#define IRQ_DB8500_DMA (IRQ_SHPI_START + 25)
-#define IRQ_DB8500_UART2 (IRQ_SHPI_START + 26)
-#define IRQ_DB8500_ICN_PMU1 (IRQ_SHPI_START + 27)
-#define IRQ_DB8500_ICN_PMU2 (IRQ_SHPI_START + 28)
-#define IRQ_DB8500_HSIR_EXCEP (IRQ_SHPI_START + 29)
-#define IRQ_DB8500_MSP0 (IRQ_SHPI_START + 31)
-#define IRQ_DB8500_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32)
-#define IRQ_DB8500_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33)
-#define IRQ_DB8500_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34)
-#define IRQ_DB8500_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35)
-#define IRQ_DB8500_HSIR_CH4_OVRRUN (IRQ_SHPI_START + 36)
-#define IRQ_DB8500_HSIR_CH5_OVRRUN (IRQ_SHPI_START + 37)
-#define IRQ_DB8500_HSIR_CH6_OVRRUN (IRQ_SHPI_START + 38)
-#define IRQ_DB8500_HSIR_CH7_OVRRUN (IRQ_SHPI_START + 39)
-#define IRQ_DB8500_AB8500 (IRQ_SHPI_START + 40)
-#define IRQ_DB8500_SDMMC2 (IRQ_SHPI_START + 41)
-#define IRQ_DB8500_SIA (IRQ_SHPI_START + 42)
-#define IRQ_DB8500_SIA2 (IRQ_SHPI_START + 43)
-#define IRQ_DB8500_SVA (IRQ_SHPI_START + 44)
-#define IRQ_DB8500_SVA2 (IRQ_SHPI_START + 45)
-#define IRQ_DB8500_PRCMU0 (IRQ_SHPI_START + 46)
-#define IRQ_DB8500_PRCMU1 (IRQ_SHPI_START + 47)
-#define IRQ_DB8500_DISP (IRQ_SHPI_START + 48)
-#define IRQ_DB8500_SPI3 (IRQ_SHPI_START + 49)
-#define IRQ_DB8500_SDMMC1 (IRQ_SHPI_START + 50)
-#define IRQ_DB8500_I2C4 (IRQ_SHPI_START + 51)
-#define IRQ_DB8500_SSP1 (IRQ_SHPI_START + 52)
-#define IRQ_DB8500_SKE (IRQ_SHPI_START + 53)
-#define IRQ_DB8500_KB (IRQ_SHPI_START + 54)
-#define IRQ_DB8500_I2C2 (IRQ_SHPI_START + 55)
-#define IRQ_DB8500_B2R2 (IRQ_SHPI_START + 56)
-#define IRQ_DB8500_CRYP0 (IRQ_SHPI_START + 57)
-#define IRQ_DB8500_SDMMC3 (IRQ_SHPI_START + 59)
-#define IRQ_DB8500_SDMMC0 (IRQ_SHPI_START + 60)
-#define IRQ_DB8500_HSEM (IRQ_SHPI_START + 61)
-#define IRQ_DB8500_MSP1 (IRQ_SHPI_START + 62)
-#define IRQ_DB8500_SBAG (IRQ_SHPI_START + 63)
-#define IRQ_DB8500_SPI1 (IRQ_SHPI_START + 96)
-#define IRQ_DB8500_SRPTIMER (IRQ_SHPI_START + 97)
-#define IRQ_DB8500_MSP2 (IRQ_SHPI_START + 98)
-#define IRQ_DB8500_SDMMC4 (IRQ_SHPI_START + 99)
-#define IRQ_DB8500_SDMMC5 (IRQ_SHPI_START + 100)
-#define IRQ_DB8500_HSIRD0 (IRQ_SHPI_START + 104)
-#define IRQ_DB8500_HSIRD1 (IRQ_SHPI_START + 105)
-#define IRQ_DB8500_HSITD0 (IRQ_SHPI_START + 106)
-#define IRQ_DB8500_HSITD1 (IRQ_SHPI_START + 107)
-#define IRQ_DB8500_CTI0 (IRQ_SHPI_START + 108)
-#define IRQ_DB8500_CTI1 (IRQ_SHPI_START + 109)
-#define IRQ_DB8500_ICN_ERR (IRQ_SHPI_START + 110)
-#define IRQ_DB8500_MALI_PPMMU (IRQ_SHPI_START + 112)
-#define IRQ_DB8500_MALI_PP (IRQ_SHPI_START + 113)
-#define IRQ_DB8500_MALI_GPMMU (IRQ_SHPI_START + 114)
-#define IRQ_DB8500_MALI_GP (IRQ_SHPI_START + 115)
-#define IRQ_DB8500_MALI (IRQ_SHPI_START + 116)
-#define IRQ_DB8500_PRCMU_SEM (IRQ_SHPI_START + 118)
-#define IRQ_DB8500_GPIO0 (IRQ_SHPI_START + 119)
-#define IRQ_DB8500_GPIO1 (IRQ_SHPI_START + 120)
-#define IRQ_DB8500_GPIO2 (IRQ_SHPI_START + 121)
-#define IRQ_DB8500_GPIO3 (IRQ_SHPI_START + 122)
-#define IRQ_DB8500_GPIO4 (IRQ_SHPI_START + 123)
-#define IRQ_DB8500_GPIO5 (IRQ_SHPI_START + 124)
-#define IRQ_DB8500_GPIO6 (IRQ_SHPI_START + 125)
-#define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126)
-#define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127)
-
-#define IRQ_CA_WAKE_REQ_ED (IRQ_SHPI_START + 71)
-#define IRQ_AC_READ_NOTIFICATION_0_ED (IRQ_SHPI_START + 66)
-#define IRQ_AC_READ_NOTIFICATION_1_ED (IRQ_SHPI_START + 64)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED (IRQ_SHPI_START + 67)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED (IRQ_SHPI_START + 65)
-
-#define IRQ_CA_WAKE_REQ_V1 (IRQ_SHPI_START + 83)
-#define IRQ_AC_READ_NOTIFICATION_0_V1 (IRQ_SHPI_START + 78)
-#define IRQ_AC_READ_NOTIFICATION_1_V1 (IRQ_SHPI_START + 76)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1 (IRQ_SHPI_START + 79)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1 (IRQ_SHPI_START + 77)
-
-#ifdef CONFIG_UX500_SOC_DB8500
-
-/* Virtual interrupts corresponding to the PRCMU wakeups. */
-#define IRQ_PRCMU_BASE IRQ_SOC_START
-#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23)
-
-/*
- * We may have several SoCs, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_SOC_START remains the same for either SoC.
- */
-#if IRQ_SOC_END < IRQ_PRCMU_END
-#undef IRQ_SOC_END
-#define IRQ_SOC_END IRQ_PRCMU_END
-#endif
-
-#endif /* CONFIG_UX500_SOC_DB8500 */
-#endif
diff --git a/arch/arm/mach-ux500/irqs.h b/arch/arm/mach-ux500/irqs.h
deleted file mode 100644
index 15b2af6..0000000
--- a/arch/arm/mach-ux500/irqs.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef ASM_ARCH_IRQS_H
-#define ASM_ARCH_IRQS_H
-
-#define IRQ_LOCALTIMER 29
-#define IRQ_LOCALWDOG 30
-
-/* Shared Peripheral Interrupt (SHPI) */
-#define IRQ_SHPI_START 32
-
-/*
- * MTU0 preserved for now until plat-nomadik is taught not to use it. Don't
- * add any other IRQs here, use the irqs-dbx500.h files.
- */
-#define IRQ_MTU0 (IRQ_SHPI_START + 4)
-
-#define DBX500_NR_INTERNAL_IRQS 166
-
-/* After chip-specific IRQ numbers we have the GPIO ones */
-#define NOMADIK_NR_GPIO 288
-#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS)
-#define IRQ_GPIO_END NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
-
-#define IRQ_SOC_START IRQ_GPIO_END
-/* This will be overridden by SoC-specific irq headers */
-#define IRQ_SOC_END IRQ_SOC_START
-
-#include "irqs-db8500.h"
-
-#define IRQ_BOARD_START IRQ_SOC_END
-/* This will be overridden by board-specific irq headers */
-#define IRQ_BOARD_END IRQ_BOARD_START
-
-#ifdef CONFIG_MACH_MOP500
-#include "irqs-board-mop500.h"
-#endif
-
-#define UX500_NR_IRQS IRQ_BOARD_END
-
-#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h
deleted file mode 100644
index 426199b..0000000
--- a/arch/arm/mach-versatile/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/timex.h
- *
- * Versatile architecture timex specifications
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-w90x900/include/mach/timex.h b/arch/arm/mach-w90x900/include/mach/timex.h
deleted file mode 100644
index 164dce0..0000000
--- a/arch/arm/mach-w90x900/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/timex.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE Now, I don't use it. */
-
-#define CLOCK_TICK_RATE 15000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 1db2a5ca..8c09a83 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -25,6 +25,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
+#include <linux/memblock.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
@@ -41,6 +42,18 @@
void __iomem *zynq_scu_base;
+/**
+ * zynq_memory_init - Initialize special memory
+ *
+ * We need to stop things allocating the low memory as DMA can't work in
+ * the 1st 512K of memory.
+ */
+static void __init zynq_memory_init(void)
+{
+ if (!__pa(PAGE_OFFSET))
+ memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir));
+}
+
static struct platform_device zynq_cpuidle_device = {
.name = "cpuidle-zynq",
};
@@ -117,5 +130,6 @@
.init_machine = zynq_init_machine,
.init_time = zynq_timer_init,
.dt_compat = zynq_dt_match,
+ .reserve = zynq_memory_init,
.restart = zynq_system_reset,
MACHINE_END
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1f8fed9..dccd7e1 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -855,7 +855,7 @@
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
- depends on ARCH_KIRKWOOD || ARCH_MV78XX0
+ depends on ARCH_KIRKWOOD || ARCH_MV78XX0 || ARCH_MVEBU
default y
select OUTER_CACHE
help
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 48bc3c0..8dc1a2b 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -13,10 +13,15 @@
*/
#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/highmem.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
-#include <plat/cache-feroceon-l2.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+
+#define L2_WRITETHROUGH_KIRKWOOD BIT(4)
/*
* Low-level cache maintenance operations.
@@ -350,3 +355,41 @@
printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
l2_wt_override ? ", in WT override mode" : "");
}
+#ifdef CONFIG_OF
+static const struct of_device_id feroceon_ids[] __initconst = {
+ { .compatible = "marvell,kirkwood-cache"},
+ { .compatible = "marvell,feroceon-cache"},
+ {}
+};
+
+int __init feroceon_of_init(void)
+{
+ struct device_node *node;
+ void __iomem *base;
+ bool l2_wt_override = false;
+ struct resource res;
+
+#if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
+ l2_wt_override = true;
+#endif
+
+ node = of_find_matching_node(NULL, feroceon_ids);
+ if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) {
+ if (of_address_to_resource(node, 0, &res))
+ return -ENODEV;
+
+ base = ioremap(res.start, resource_size(&res));
+ if (!base)
+ return -ENOMEM;
+
+ if (l2_wt_override)
+ writel(readl(base) | L2_WRITETHROUGH_KIRKWOOD, base);
+ else
+ writel(readl(base) & ~L2_WRITETHROUGH_KIRKWOOD, base);
+ }
+
+ feroceon_l2_init(l2_wt_override);
+
+ return 0;
+}
+#endif
diff --git a/arch/arm/plat-omap/include/plat/timex.h b/arch/arm/plat-omap/include/plat/timex.h
deleted file mode 100644
index e27d2da..0000000
--- a/arch/arm/plat-omap/include/plat/timex.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/timex.h
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
-#define __ASM_ARCH_OMAP_TIMEX_H
-
-#define CLOCK_TICK_RATE (HZ * 100000UL)
-
-#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index dd4327f..27bbcfc 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -36,6 +36,7 @@
select HAVE_GENERIC_DMA_COHERENT
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_MEMBLOCK
+ select HAVE_PATA_PLATFORM
select HAVE_PERF_EVENTS
select IRQ_DOMAIN
select MODULES_USE_ELF_RELA
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 84139be..7959dd0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
@@ -19,6 +18,7 @@
CONFIG_KALLSYMS_ALL=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
+CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
@@ -27,6 +27,7 @@
CONFIG_ARCH_XGENE=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
+CONFIG_CMA=y
CONFIG_CMDLINE="console=ttyAMA0"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
@@ -42,14 +43,17 @@
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
-CONFIG_BLK_DEV=y
+CONFIG_DMA_CMA=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
-CONFIG_MII=y
CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_I8042 is not set
@@ -62,13 +66,19 @@
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h
index 01de5aa..0237f08 100644
--- a/arch/arm64/include/asm/atomic.h
+++ b/arch/arm64/include/asm/atomic.h
@@ -54,8 +54,7 @@
" stxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
- : "Ir" (i)
- : "cc");
+ : "Ir" (i));
}
static inline int atomic_add_return(int i, atomic_t *v)
@@ -64,14 +63,15 @@
int result;
asm volatile("// atomic_add_return\n"
-"1: ldaxr %w0, %2\n"
+"1: ldxr %w0, %2\n"
" add %w0, %w0, %w3\n"
" stlxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
: "Ir" (i)
- : "cc", "memory");
+ : "memory");
+ smp_mb();
return result;
}
@@ -86,8 +86,7 @@
" stxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
- : "Ir" (i)
- : "cc");
+ : "Ir" (i));
}
static inline int atomic_sub_return(int i, atomic_t *v)
@@ -96,14 +95,15 @@
int result;
asm volatile("// atomic_sub_return\n"
-"1: ldaxr %w0, %2\n"
+"1: ldxr %w0, %2\n"
" sub %w0, %w0, %w3\n"
" stlxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
: "Ir" (i)
- : "cc", "memory");
+ : "memory");
+ smp_mb();
return result;
}
@@ -112,17 +112,20 @@
unsigned long tmp;
int oldval;
+ smp_mb();
+
asm volatile("// atomic_cmpxchg\n"
-"1: ldaxr %w1, %2\n"
+"1: ldxr %w1, %2\n"
" cmp %w1, %w3\n"
" b.ne 2f\n"
-" stlxr %w0, %w4, %2\n"
+" stxr %w0, %w4, %2\n"
" cbnz %w0, 1b\n"
"2:"
: "=&r" (tmp), "=&r" (oldval), "+Q" (ptr->counter)
: "Ir" (old), "r" (new)
- : "cc", "memory");
+ : "cc");
+ smp_mb();
return oldval;
}
@@ -173,8 +176,7 @@
" stxr %w1, %0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
- : "Ir" (i)
- : "cc");
+ : "Ir" (i));
}
static inline long atomic64_add_return(long i, atomic64_t *v)
@@ -183,14 +185,15 @@
unsigned long tmp;
asm volatile("// atomic64_add_return\n"
-"1: ldaxr %0, %2\n"
+"1: ldxr %0, %2\n"
" add %0, %0, %3\n"
" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
: "Ir" (i)
- : "cc", "memory");
+ : "memory");
+ smp_mb();
return result;
}
@@ -205,8 +208,7 @@
" stxr %w1, %0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
- : "Ir" (i)
- : "cc");
+ : "Ir" (i));
}
static inline long atomic64_sub_return(long i, atomic64_t *v)
@@ -215,14 +217,15 @@
unsigned long tmp;
asm volatile("// atomic64_sub_return\n"
-"1: ldaxr %0, %2\n"
+"1: ldxr %0, %2\n"
" sub %0, %0, %3\n"
" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
: "Ir" (i)
- : "cc", "memory");
+ : "memory");
+ smp_mb();
return result;
}
@@ -231,17 +234,20 @@
long oldval;
unsigned long res;
+ smp_mb();
+
asm volatile("// atomic64_cmpxchg\n"
-"1: ldaxr %1, %2\n"
+"1: ldxr %1, %2\n"
" cmp %1, %3\n"
" b.ne 2f\n"
-" stlxr %w0, %4, %2\n"
+" stxr %w0, %4, %2\n"
" cbnz %w0, 1b\n"
"2:"
: "=&r" (res), "=&r" (oldval), "+Q" (ptr->counter)
: "Ir" (old), "r" (new)
- : "cc", "memory");
+ : "cc");
+ smp_mb();
return oldval;
}
@@ -253,11 +259,12 @@
unsigned long tmp;
asm volatile("// atomic64_dec_if_positive\n"
-"1: ldaxr %0, %2\n"
+"1: ldxr %0, %2\n"
" subs %0, %0, #1\n"
" b.mi 2f\n"
" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b\n"
+" dmb ish\n"
"2:"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
:
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
index 78e20ba..409ca37 100644
--- a/arch/arm64/include/asm/barrier.h
+++ b/arch/arm64/include/asm/barrier.h
@@ -25,7 +25,7 @@
#define wfi() asm volatile("wfi" : : : "memory")
#define isb() asm volatile("isb" : : : "memory")
-#define dsb() asm volatile("dsb sy" : : : "memory")
+#define dsb(opt) asm volatile("dsb sy" : : : "memory")
#define mb() dsb()
#define rmb() asm volatile("dsb ld" : : : "memory")
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index fea9ee3..88932498 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -116,6 +116,7 @@
static inline void __flush_icache_all(void)
{
asm("ic ialluis");
+ dsb();
}
#define flush_dcache_mmap_lock(mapping) \
diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
index 56166d7..57c0fa7 100644
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -29,44 +29,45 @@
switch (size) {
case 1:
asm volatile("// __xchg1\n"
- "1: ldaxrb %w0, %2\n"
+ "1: ldxrb %w0, %2\n"
" stlxrb %w1, %w3, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)
: "r" (x)
- : "cc", "memory");
+ : "memory");
break;
case 2:
asm volatile("// __xchg2\n"
- "1: ldaxrh %w0, %2\n"
+ "1: ldxrh %w0, %2\n"
" stlxrh %w1, %w3, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (ret), "=&r" (tmp), "+Q" (*(u16 *)ptr)
: "r" (x)
- : "cc", "memory");
+ : "memory");
break;
case 4:
asm volatile("// __xchg4\n"
- "1: ldaxr %w0, %2\n"
+ "1: ldxr %w0, %2\n"
" stlxr %w1, %w3, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (ret), "=&r" (tmp), "+Q" (*(u32 *)ptr)
: "r" (x)
- : "cc", "memory");
+ : "memory");
break;
case 8:
asm volatile("// __xchg8\n"
- "1: ldaxr %0, %2\n"
+ "1: ldxr %0, %2\n"
" stlxr %w1, %3, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (ret), "=&r" (tmp), "+Q" (*(u64 *)ptr)
: "r" (x)
- : "cc", "memory");
+ : "memory");
break;
default:
BUILD_BUG();
}
+ smp_mb();
return ret;
}
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index 7883412..c4a7f94 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -42,7 +42,7 @@
#define ESR_EL1_EC_SP_ALIGN (0x26)
#define ESR_EL1_EC_FP_EXC32 (0x28)
#define ESR_EL1_EC_FP_EXC64 (0x2C)
-#define ESR_EL1_EC_SERRROR (0x2F)
+#define ESR_EL1_EC_SERROR (0x2F)
#define ESR_EL1_EC_BREAKPT_EL0 (0x30)
#define ESR_EL1_EC_BREAKPT_EL1 (0x31)
#define ESR_EL1_EC_SOFTSTP_EL0 (0x32)
diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h
index 78cc3ab..5f750dc 100644
--- a/arch/arm64/include/asm/futex.h
+++ b/arch/arm64/include/asm/futex.h
@@ -24,10 +24,11 @@
#define __futex_atomic_op(insn, ret, oldval, uaddr, tmp, oparg) \
asm volatile( \
-"1: ldaxr %w1, %2\n" \
+"1: ldxr %w1, %2\n" \
insn "\n" \
"2: stlxr %w3, %w0, %2\n" \
" cbnz %w3, 1b\n" \
+" dmb ish\n" \
"3:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -40,7 +41,7 @@
" .popsection\n" \
: "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp) \
: "r" (oparg), "Ir" (-EFAULT) \
- : "cc", "memory")
+ : "memory")
static inline int
futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
@@ -111,11 +112,12 @@
return -EFAULT;
asm volatile("// futex_atomic_cmpxchg_inatomic\n"
-"1: ldaxr %w1, %2\n"
+"1: ldxr %w1, %2\n"
" sub %w3, %w1, %w4\n"
" cbnz %w3, 3f\n"
"2: stlxr %w3, %w5, %2\n"
" cbnz %w3, 1b\n"
+" dmb ish\n"
"3:\n"
" .pushsection .fixup,\"ax\"\n"
"4: mov %w0, %w6\n"
@@ -127,7 +129,7 @@
" .popsection\n"
: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
- : "cc", "memory");
+ : "memory");
*uval = val;
return ret;
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index c98ef47..0eb3986 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -231,7 +231,7 @@
#define ESR_EL2_EC_SP_ALIGN (0x26)
#define ESR_EL2_EC_FP_EXC32 (0x28)
#define ESR_EL2_EC_FP_EXC64 (0x2C)
-#define ESR_EL2_EC_SERRROR (0x2F)
+#define ESR_EL2_EC_SERROR (0x2F)
#define ESR_EL2_EC_BREAKPT (0x30)
#define ESR_EL2_EC_BREAKPT_HYP (0x31)
#define ESR_EL2_EC_SOFTSTP (0x32)
diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h
index 3d5cf06..c45b7b1 100644
--- a/arch/arm64/include/asm/spinlock.h
+++ b/arch/arm64/include/asm/spinlock.h
@@ -132,7 +132,7 @@
" cbnz %w0, 2b\n"
: "=&r" (tmp), "+Q" (rw->lock)
: "r" (0x80000000)
- : "cc", "memory");
+ : "memory");
}
static inline int arch_write_trylock(arch_rwlock_t *rw)
@@ -146,7 +146,7 @@
"1:\n"
: "=&r" (tmp), "+Q" (rw->lock)
: "r" (0x80000000)
- : "cc", "memory");
+ : "memory");
return !tmp;
}
@@ -187,7 +187,7 @@
" cbnz %w1, 2b\n"
: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
:
- : "cc", "memory");
+ : "memory");
}
static inline void arch_read_unlock(arch_rwlock_t *rw)
@@ -201,7 +201,7 @@
" cbnz %w1, 1b\n"
: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
:
- : "cc", "memory");
+ : "memory");
}
static inline int arch_read_trylock(arch_rwlock_t *rw)
@@ -216,7 +216,7 @@
"1:\n"
: "=&r" (tmp), "+r" (tmp2), "+Q" (rw->lock)
:
- : "cc", "memory");
+ : "memory");
return !tmp2;
}
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 58125bf..bb8eb8a 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -399,7 +399,10 @@
__SYSCALL(375, sys_setns)
__SYSCALL(376, compat_sys_process_vm_readv)
__SYSCALL(377, compat_sys_process_vm_writev)
-__SYSCALL(378, sys_ni_syscall) /* 378 for kcmp */
+__SYSCALL(378, sys_kcmp)
+__SYSCALL(379, sys_finit_module)
+__SYSCALL(380, sys_sched_setattr)
+__SYSCALL(381, sys_sched_getattr)
#define __NR_compat_syscalls 379
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 495ab6f..eaf54a3 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -148,6 +148,15 @@
#define KVM_REG_ARM_TIMER_CNT ARM64_SYS_REG(3, 3, 14, 3, 2)
#define KVM_REG_ARM_TIMER_CVAL ARM64_SYS_REG(3, 3, 14, 0, 2)
+/* Device Control API: ARM VGIC */
+#define KVM_DEV_ARM_VGIC_GRP_ADDR 0
+#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1
+#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2
+#define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32
+#define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT)
+#define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0
+#define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)
+
/* KVM_IRQ_LINE irq field index values */
#define KVM_ARM_IRQ_TYPE_SHIFT 24
#define KVM_ARM_IRQ_TYPE_MASK 0xff
diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S
index 63c48ff..7787208 100644
--- a/arch/arm64/kernel/kuser32.S
+++ b/arch/arm64/kernel/kuser32.S
@@ -38,12 +38,13 @@
.inst 0xe92d00f0 // push {r4, r5, r6, r7}
.inst 0xe1c040d0 // ldrd r4, r5, [r0]
.inst 0xe1c160d0 // ldrd r6, r7, [r1]
- .inst 0xe1b20e9f // 1: ldaexd r0, r1, [r2]
+ .inst 0xe1b20f9f // 1: ldrexd r0, r1, [r2]
.inst 0xe0303004 // eors r3, r0, r4
.inst 0x00313005 // eoreqs r3, r1, r5
.inst 0x01a23e96 // stlexdeq r3, r6, [r2]
.inst 0x03330001 // teqeq r3, #1
.inst 0x0afffff9 // beq 1b
+ .inst 0xf57ff05b // dmb ish
.inst 0xe2730000 // rsbs r0, r3, #0
.inst 0xe8bd00f0 // pop {r4, r5, r6, r7}
.inst 0xe12fff1e // bx lr
@@ -55,11 +56,12 @@
.align 5
__kuser_cmpxchg: // 0xffff0fc0
- .inst 0xe1923e9f // 1: ldaex r3, [r2]
+ .inst 0xe1923f9f // 1: ldrex r3, [r2]
.inst 0xe0533000 // subs r3, r3, r0
.inst 0x01823e91 // stlexeq r3, r1, [r2]
.inst 0x03330001 // teqeq r3, #1
.inst 0x0afffffa // beq 1b
+ .inst 0xf57ff05b // dmb ish
.inst 0xe2730000 // rsbs r0, r3, #0
.inst 0xe12fff1e // bx lr
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 65d40cf..a7149ca 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -238,6 +238,8 @@
vdso_data->use_syscall = use_syscall;
vdso_data->xtime_coarse_sec = xtime_coarse.tv_sec;
vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec;
+ vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec;
+ vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec;
if (!use_syscall) {
vdso_data->cs_cycle_last = tk->clock->cycle_last;
@@ -245,8 +247,6 @@
vdso_data->xtime_clock_nsec = tk->xtime_nsec;
vdso_data->cs_mult = tk->mult;
vdso_data->cs_shift = tk->shift;
- vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec;
- vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec;
}
smp_wmb();
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index d8064af..6d20b7d 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -48,7 +48,7 @@
# Actual build commands
quiet_cmd_vdsold = VDSOL $@
- cmd_vdsold = $(CC) $(c_flags) -Wl,-T $^ -o $@
+ cmd_vdsold = $(CC) $(c_flags) -Wl,-n -Wl,-T $^ -o $@
quiet_cmd_vdsoas = VDSOA $@
cmd_vdsoas = $(CC) $(a_flags) -c -o $@ $<
diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S
index f0a6d10..fe652ff 100644
--- a/arch/arm64/kernel/vdso/gettimeofday.S
+++ b/arch/arm64/kernel/vdso/gettimeofday.S
@@ -103,6 +103,8 @@
bl __do_get_tspec
seqcnt_check w9, 1b
+ mov x30, x2
+
cmp w0, #CLOCK_MONOTONIC
b.ne 6f
@@ -118,6 +120,9 @@
ccmp w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne
b.ne 8f
+ /* xtime_coarse_nsec is already right-shifted */
+ mov x12, #0
+
/* Get coarse timespec. */
adr vdso_data, _vdso_data
3: seqcnt_acquire
@@ -156,7 +161,7 @@
lsr x11, x11, x12
stp x10, x11, [x1, #TSPEC_TV_SEC]
mov x0, xzr
- ret x2
+ ret
7:
mov x30, x2
8: /* Syscall fallback. */
diff --git a/arch/arm64/lib/bitops.S b/arch/arm64/lib/bitops.S
index e5db797..7dac371 100644
--- a/arch/arm64/lib/bitops.S
+++ b/arch/arm64/lib/bitops.S
@@ -46,11 +46,12 @@
mov x2, #1
add x1, x1, x0, lsr #3 // Get word offset
lsl x4, x2, x3 // Create mask
-1: ldaxr x2, [x1]
+1: ldxr x2, [x1]
lsr x0, x2, x3 // Save old value of bit
\instr x2, x2, x4 // toggle bit
stlxr w5, x2, [x1]
cbnz w5, 1b
+ dmb ish
and x0, x0, #1
3: ret
ENDPROC(\name )
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 45b5ab5..fbd7678 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -45,6 +45,7 @@
if (IS_ENABLED(CONFIG_DMA_CMA)) {
struct page *page;
+ size = PAGE_ALIGN(size);
page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT,
get_order(size));
if (!page)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index f557ebb..f8dc7e8 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -203,10 +203,18 @@
do {
next = pmd_addr_end(addr, end);
/* try section mapping first */
- if (((addr | next | phys) & ~SECTION_MASK) == 0)
+ if (((addr | next | phys) & ~SECTION_MASK) == 0) {
+ pmd_t old_pmd =*pmd;
set_pmd(pmd, __pmd(phys | prot_sect_kernel));
- else
+ /*
+ * Check for previous table entries created during
+ * boot (__create_page_tables) and flush them.
+ */
+ if (!pmd_none(old_pmd))
+ flush_tlb_all();
+ } else {
alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys));
+ }
phys += next - addr;
} while (pmd++, addr = next, addr != end);
}
diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c
index 7083cda..62c6101 100644
--- a/arch/arm64/mm/pgd.c
+++ b/arch/arm64/mm/pgd.c
@@ -32,17 +32,10 @@
pgd_t *pgd_alloc(struct mm_struct *mm)
{
- pgd_t *new_pgd;
-
if (PGD_SIZE == PAGE_SIZE)
- new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
+ return (pgd_t *)get_zeroed_page(GFP_KERNEL);
else
- new_pgd = kzalloc(PGD_SIZE, GFP_KERNEL);
-
- if (!new_pgd)
- return NULL;
-
- return new_pgd;
+ return kzalloc(PGD_SIZE, GFP_KERNEL);
}
void pgd_free(struct mm_struct *mm, pgd_t *pgd)
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index afd45e0..ae763d8b 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -11,7 +11,7 @@
-#define NR_syscalls 312 /* length of syscall table */
+#define NR_syscalls 314 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h
index 34fd6fe..715e85f 100644
--- a/arch/ia64/include/uapi/asm/unistd.h
+++ b/arch/ia64/include/uapi/asm/unistd.h
@@ -325,5 +325,7 @@
#define __NR_process_vm_writev 1333
#define __NR_accept4 1334
#define __NR_finit_module 1335
+#define __NR_sched_setattr 1336
+#define __NR_sched_getattr 1337
#endif /* _UAPI_ASM_IA64_UNISTD_H */
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index ddea607f..fa8d61a 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1773,6 +1773,8 @@
data8 sys_process_vm_writev
data8 sys_accept4
data8 sys_finit_module // 1335
+ data8 sys_sched_setattr
+ data8 sys_sched_getattr
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/microblaze/include/asm/delay.h b/arch/microblaze/include/asm/delay.h
index 05b7d39..66fc24c 100644
--- a/arch/microblaze/include/asm/delay.h
+++ b/arch/microblaze/include/asm/delay.h
@@ -13,6 +13,8 @@
#ifndef _ASM_MICROBLAZE_DELAY_H
#define _ASM_MICROBLAZE_DELAY_H
+#include <linux/param.h>
+
extern inline void __delay(unsigned long loops)
{
asm volatile ("# __delay \n\t" \
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index a2cea72..3fbb7f1 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -89,6 +89,11 @@
{
return le32_to_cpu(*(volatile unsigned int __force *)addr);
}
+#define readq readq
+static inline u64 readq(const volatile void __iomem *addr)
+{
+ return le64_to_cpu(__raw_readq(addr));
+}
static inline void writeb(unsigned char v, volatile void __iomem *addr)
{
*(volatile unsigned char __force *)addr = v;
@@ -101,6 +106,7 @@
{
*(volatile unsigned int __force *)addr = cpu_to_le32(v);
}
+#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
/* ioread and iowrite variants. thease are for now same as __raw_
* variants of accessors. we might check for endianess in the feature
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index b7fb043..17645b2 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -66,7 +66,7 @@
mts rmsr, r0
/* Disable stack protection from bootloader */
mts rslr, r0
- addi r8, r0, 0xFFFFFFF
+ addi r8, r0, 0xFFFFFFFF
mts rshr, r8
/*
* According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 11f3ad2..5483906 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -534,13 +534,10 @@
s0 = AU1100_GPIO1_INT;
s1 = AU1100_GPIO4_INT;
+ gpio_request(19, "sd0_cd");
+ gpio_request(20, "sd1_cd");
gpio_direction_input(19); /* sd0 cd# */
gpio_direction_input(20); /* sd1 cd# */
- gpio_direction_input(21); /* touch pendown# */
- gpio_direction_input(207); /* SPI MISO */
- gpio_direction_output(208, 0); /* SPI MOSI */
- gpio_direction_output(209, 1); /* SPI SCK */
- gpio_direction_output(210, 1); /* SPI CS# */
/* spi_gpio on SSI0 pins */
pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index cfe092f..6b97495 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -74,6 +74,8 @@
default:
BUG();
}
+
+ return SIGFPE;
}
#define __disable_fpu() \
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index 1dee279..d6e154a 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -369,16 +369,18 @@
#define __NR_process_vm_writev (__NR_Linux + 346)
#define __NR_kcmp (__NR_Linux + 347)
#define __NR_finit_module (__NR_Linux + 348)
+#define __NR_sched_setattr (__NR_Linux + 349)
+#define __NR_sched_getattr (__NR_Linux + 350)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 348
+#define __NR_Linux_syscalls 350
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 348
+#define __NR_O32_Linux_syscalls 350
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -695,16 +697,18 @@
#define __NR_kcmp (__NR_Linux + 306)
#define __NR_finit_module (__NR_Linux + 307)
#define __NR_getdents64 (__NR_Linux + 308)
+#define __NR_sched_setattr (__NR_Linux + 309)
+#define __NR_sched_getattr (__NR_Linux + 310)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 308
+#define __NR_Linux_syscalls 310
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 308
+#define __NR_64_Linux_syscalls 310
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -1025,15 +1029,17 @@
#define __NR_process_vm_writev (__NR_Linux + 310)
#define __NR_kcmp (__NR_Linux + 311)
#define __NR_finit_module (__NR_Linux + 312)
+#define __NR_sched_setattr (__NR_Linux + 313)
+#define __NR_sched_getattr (__NR_Linux + 314)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 312
+#define __NR_Linux_syscalls 314
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 312
+#define __NR_N32_Linux_syscalls 314
#endif /* _UAPI_ASM_UNISTD_H */
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index e8e541b..a5b14f4 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -563,3 +563,5 @@
PTR sys_process_vm_writev
PTR sys_kcmp
PTR sys_finit_module
+ PTR sys_sched_setattr
+ PTR sys_sched_getattr /* 4350 */
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 57e3742..b56e254 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -425,4 +425,6 @@
PTR sys_kcmp
PTR sys_finit_module
PTR sys_getdents64
+ PTR sys_sched_setattr
+ PTR sys_sched_getattr /* 5310 */
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 2f48f59..f7e5b72 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -418,4 +418,6 @@
PTR compat_sys_process_vm_writev /* 6310 */
PTR sys_kcmp
PTR sys_finit_module
+ PTR sys_sched_setattr
+ PTR sys_sched_getattr
.size sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index f1acdb4..6788727d 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -541,4 +541,6 @@
PTR compat_sys_process_vm_writev
PTR sys_kcmp
PTR sys_finit_module
+ PTR sys_sched_setattr
+ PTR sys_sched_getattr /* 4350 */
.size sys32_call_table,.-sys32_call_table
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 88d0962..2bedafe 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -33,22 +33,9 @@
int hpux_execve(struct pt_regs *regs)
{
- int error;
- struct filename *filename;
-
- filename = getname((const char __user *) regs->gr[26]);
- error = PTR_ERR(filename);
- if (IS_ERR(filename))
- goto out;
-
- error = do_execve(filename->name,
+ return do_execve(getname((const char __user *) regs->gr[26]),
(const char __user *const __user *) regs->gr[25],
(const char __user *const __user *) regs->gr[24]);
-
- putname(filename);
-
-out:
- return error;
}
struct hpux_dirent {
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index e27e9ad..150866b 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -134,6 +134,7 @@
}
extern int dma_set_mask(struct device *dev, u64 dma_mask);
+extern int __dma_set_mask(struct device *dev, u64 dma_mask);
#define dma_alloc_coherent(d,s,h,f) dma_alloc_attrs(d,s,h,f,NULL)
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index f7a8036..42632c7 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -77,6 +77,7 @@
#ifdef CONFIG_IOMMU_API
struct iommu_group *it_group;
#endif
+ void (*set_bypass)(struct iommu_table *tbl, bool enable);
};
/* Pure 2^n version of get_order */
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index 4ee06fe..d0e784e 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -8,6 +8,7 @@
#ifdef __powerpc64__
+extern char __start_interrupts[];
extern char __end_interrupts[];
extern char __prom_init_toc_start[];
@@ -21,6 +22,17 @@
return 0;
}
+static inline int overlaps_interrupt_vector_text(unsigned long start,
+ unsigned long end)
+{
+ unsigned long real_start, real_end;
+ real_start = __start_interrupts - _stext;
+ real_end = __end_interrupts - _stext;
+
+ return start < (unsigned long)__va(real_end) &&
+ (unsigned long)__va(real_start) < end;
+}
+
static inline int overlaps_kernel_text(unsigned long start, unsigned long end)
{
return start < (unsigned long)__init_end &&
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 8032b97..ee78f6e 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -191,12 +191,10 @@
#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
-int dma_set_mask(struct device *dev, u64 dma_mask)
+int __dma_set_mask(struct device *dev, u64 dma_mask)
{
struct dma_map_ops *dma_ops = get_dma_ops(dev);
- if (ppc_md.dma_set_mask)
- return ppc_md.dma_set_mask(dev, dma_mask);
if ((dma_ops != NULL) && (dma_ops->set_dma_mask != NULL))
return dma_ops->set_dma_mask(dev, dma_mask);
if (!dev->dma_mask || !dma_supported(dev, dma_mask))
@@ -204,6 +202,12 @@
*dev->dma_mask = dma_mask;
return 0;
}
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (ppc_md.dma_set_mask)
+ return ppc_md.dma_set_mask(dev, dma_mask);
+ return __dma_set_mask(dev, dma_mask);
+}
EXPORT_SYMBOL(dma_set_mask);
u64 dma_get_required_mask(struct device *dev)
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 7bb30dc..fdc679d 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -362,9 +362,13 @@
*/
if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
return NULL;
+
driver = eeh_pcid_get(dev);
- if (driver && driver->err_handler)
- return NULL;
+ if (driver) {
+ eeh_pcid_put(dev);
+ if (driver->err_handler)
+ return NULL;
+ }
/* Remove it from PCI subsystem */
pr_debug("EEH: Removing %s without EEH sensitive driver\n",
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index d773dd4..88e3ec6 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -1088,6 +1088,14 @@
memset(tbl->it_map, 0xff, sz);
iommu_clear_tces_and_put_pages(tbl, tbl->it_offset, tbl->it_size);
+ /*
+ * Disable iommu bypass, otherwise the user can DMA to all of
+ * our physical memory via the bypass window instead of just
+ * the pages that has been explicitly mapped into the iommu
+ */
+ if (tbl->set_bypass)
+ tbl->set_bypass(tbl, false);
+
return 0;
}
EXPORT_SYMBOL_GPL(iommu_take_ownership);
@@ -1102,6 +1110,10 @@
/* Restore bit#0 set by iommu_init_table() */
if (tbl->it_offset == 0)
set_bit(0, tbl->it_map);
+
+ /* The kernel owns the device now, we can restore the iommu bypass */
+ if (tbl->set_bypass)
+ tbl->set_bypass(tbl, true);
}
EXPORT_SYMBOL_GPL(iommu_release_ownership);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 9729b23..1d0848b 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -559,8 +559,13 @@
#ifdef CONFIG_PPC64
cpu_nr = i;
#else
+#ifdef CONFIG_SMP
cpu_nr = get_hard_smp_processor_id(i);
+#else
+ cpu_nr = 0;
#endif
+#endif
+
memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE);
tp = critirq_ctx[cpu_nr];
tp->cpu = cpu_nr;
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 75d4f73..015ae55 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -196,7 +196,9 @@
/* Values we need to export to the second kernel via the device tree. */
static phys_addr_t kernel_end;
+static phys_addr_t crashk_base;
static phys_addr_t crashk_size;
+static unsigned long long mem_limit;
static struct property kernel_end_prop = {
.name = "linux,kernel-end",
@@ -207,7 +209,7 @@
static struct property crashk_base_prop = {
.name = "linux,crashkernel-base",
.length = sizeof(phys_addr_t),
- .value = &crashk_res.start,
+ .value = &crashk_base
};
static struct property crashk_size_prop = {
@@ -219,9 +221,11 @@
static struct property memory_limit_prop = {
.name = "linux,memory-limit",
.length = sizeof(unsigned long long),
- .value = &memory_limit,
+ .value = &mem_limit,
};
+#define cpu_to_be_ulong __PASTE(cpu_to_be, BITS_PER_LONG)
+
static void __init export_crashk_values(struct device_node *node)
{
struct property *prop;
@@ -237,8 +241,9 @@
of_remove_property(node, prop);
if (crashk_res.start != 0) {
+ crashk_base = cpu_to_be_ulong(crashk_res.start),
of_add_property(node, &crashk_base_prop);
- crashk_size = resource_size(&crashk_res);
+ crashk_size = cpu_to_be_ulong(resource_size(&crashk_res));
of_add_property(node, &crashk_size_prop);
}
@@ -246,6 +251,7 @@
* memory_limit is required by the kexec-tools to limit the
* crash regions to the actual memory used.
*/
+ mem_limit = cpu_to_be_ulong(memory_limit);
of_update_property(node, &memory_limit_prop);
}
@@ -264,7 +270,7 @@
of_remove_property(node, prop);
/* information needed by userspace when using default_machine_kexec */
- kernel_end = __pa(_end);
+ kernel_end = cpu_to_be_ulong(__pa(_end));
of_add_property(node, &kernel_end_prop);
export_crashk_values(node);
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index be4e6d6..59d229a 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -369,6 +369,7 @@
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;
+static unsigned long htab_size;
static struct property htab_base_prop = {
.name = "linux,htab-base",
@@ -379,7 +380,7 @@
static struct property htab_size_prop = {
.name = "linux,htab-size",
.length = sizeof(unsigned long),
- .value = &htab_size_bytes,
+ .value = &htab_size,
};
static int __init export_htab_values(void)
@@ -403,8 +404,9 @@
if (prop)
of_remove_property(node, prop);
- htab_base = __pa(htab_address);
+ htab_base = cpu_to_be64(__pa(htab_address));
of_add_property(node, &htab_base_prop);
+ htab_size = cpu_to_be64(htab_size_bytes);
of_add_property(node, &htab_size_prop);
of_node_put(node);
diff --git a/arch/powerpc/kernel/reloc_64.S b/arch/powerpc/kernel/reloc_64.S
index b47a0e1..1482327 100644
--- a/arch/powerpc/kernel/reloc_64.S
+++ b/arch/powerpc/kernel/reloc_64.S
@@ -69,8 +69,8 @@
* R_PPC64_RELATIVE ones.
*/
mtctr r8
-5: lwz r0,12(9) /* ELF64_R_TYPE(reloc->r_info) */
- cmpwi r0,R_PPC64_RELATIVE
+5: ld r0,8(9) /* ELF64_R_TYPE(reloc->r_info) */
+ cmpdi r0,R_PPC64_RELATIVE
bne 6f
ld r6,0(r9) /* reloc->r_offset */
ld r0,16(r9) /* reloc->r_addend */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 2b0da27..04cc4fc 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -247,7 +247,12 @@
/* interrupt stacks must be in lowmem, we get that for free on ppc32
* as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
for_each_possible_cpu(i) {
+#ifdef CONFIG_SMP
hw_cpu = get_hard_smp_processor_id(i);
+#else
+ hw_cpu = 0;
+#endif
+
critirq_ctx[hw_cpu] = (struct thread_info *)
__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
#ifdef CONFIG_BOOKE
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index de68812..d766d6e 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -207,6 +207,20 @@
if (overlaps_kernel_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
+ /*
+ * If relocatable, check if it overlaps interrupt vectors that
+ * are copied down to real 0. For relocatable kernel
+ * (e.g. kdump case) we copy interrupt vectors down to real
+ * address 0. Mark that region as executable. This is
+ * because on p8 system with relocation on exception feature
+ * enabled, exceptions are raised with MMU (IR=DR=1) ON. Hence
+ * in order to execute the interrupt handlers in virtual
+ * mode the vector region need to be marked as executable.
+ */
+ if ((PHYSICAL_START > MEMORY_START) &&
+ overlaps_interrupt_vector_text(vaddr, vaddr + step))
+ tprot &= ~HPTE_R_N;
+
hash = hpt_hash(vpn, shift, ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 29b89e8..67cf220 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1147,6 +1147,9 @@
mmcr0 = ebb_switch_in(ebb, cpuhw->mmcr[0]);
mb();
+ if (cpuhw->bhrb_users)
+ ppmu->config_bhrb(cpuhw->bhrb_filter);
+
write_mmcr0(cpuhw, mmcr0);
/*
@@ -1158,8 +1161,6 @@
}
out:
- if (cpuhw->bhrb_users)
- ppmu->config_bhrb(cpuhw->bhrb_filter);
local_irq_restore(flags);
}
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index a3f7abd..96cee20 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -25,6 +25,37 @@
#define PM_BRU_FIN 0x10068
#define PM_BR_MPRED_CMPL 0x400f6
+/* All L1 D cache load references counted at finish, gated by reject */
+#define PM_LD_REF_L1 0x100ee
+/* Load Missed L1 */
+#define PM_LD_MISS_L1 0x3e054
+/* Store Missed L1 */
+#define PM_ST_MISS_L1 0x300f0
+/* L1 cache data prefetches */
+#define PM_L1_PREF 0x0d8b8
+/* Instruction fetches from L1 */
+#define PM_INST_FROM_L1 0x04080
+/* Demand iCache Miss */
+#define PM_L1_ICACHE_MISS 0x200fd
+/* Instruction Demand sectors wriittent into IL1 */
+#define PM_L1_DEMAND_WRITE 0x0408c
+/* Instruction prefetch written into IL1 */
+#define PM_IC_PREF_WRITE 0x0408e
+/* The data cache was reloaded from local core's L3 due to a demand load */
+#define PM_DATA_FROM_L3 0x4c042
+/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */
+#define PM_DATA_FROM_L3MISS 0x300fe
+/* All successful D-side store dispatches for this thread */
+#define PM_L2_ST 0x17080
+/* All successful D-side store dispatches for this thread that were L2 Miss */
+#define PM_L2_ST_MISS 0x17082
+/* Total HW L3 prefetches(Load+store) */
+#define PM_L3_PREF_ALL 0x4e052
+/* Data PTEG reload */
+#define PM_DTLB_MISS 0x300fc
+/* ITLB Reloaded */
+#define PM_ITLB_MISS 0x400fc
+
/*
* Raw event encoding for POWER8:
@@ -557,6 +588,8 @@
[PERF_COUNT_HW_INSTRUCTIONS] = PM_INST_CMPL,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PM_BRU_FIN,
[PERF_COUNT_HW_BRANCH_MISSES] = PM_BR_MPRED_CMPL,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = PM_LD_REF_L1,
+ [PERF_COUNT_HW_CACHE_MISSES] = PM_LD_MISS_L1,
};
static u64 power8_bhrb_filter_map(u64 branch_sample_type)
@@ -596,6 +629,116 @@
mtspr(SPRN_MMCRA, (mfspr(SPRN_MMCRA) | pmu_bhrb_filter));
}
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+ [ C(L1D) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_LD_REF_L1,
+ [ C(RESULT_MISS) ] = PM_LD_MISS_L1,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = PM_ST_MISS_L1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L1_PREF,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(L1I) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_INST_FROM_L1,
+ [ C(RESULT_MISS) ] = PM_L1_ICACHE_MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L1_DEMAND_WRITE,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = PM_IC_PREF_WRITE,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(LL) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_DATA_FROM_L3,
+ [ C(RESULT_MISS) ] = PM_DATA_FROM_L3MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L2_ST,
+ [ C(RESULT_MISS) ] = PM_L2_ST_MISS,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L3_PREF_ALL,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(DTLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = PM_DTLB_MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(ITLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = PM_ITLB_MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(BPU) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_BRU_FIN,
+ [ C(RESULT_MISS) ] = PM_BR_MPRED_CMPL,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(NODE) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+};
+
+#undef C
+
static struct power_pmu power8_pmu = {
.name = "POWER8",
.n_counter = 6,
@@ -611,6 +754,7 @@
.flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB,
.n_generic = ARRAY_SIZE(power8_generic_events),
.generic_events = power8_generic_events,
+ .cache_events = &power8_cache_events,
.attr_groups = power8_pmu_attr_groups,
.bhrb_nr = 32,
};
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 7d6dcc6..3b2b4fb 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -21,6 +21,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/msi.h>
+#include <linux/memblock.h>
#include <asm/sections.h>
#include <asm/io.h>
@@ -460,9 +461,39 @@
return;
pe = &phb->ioda.pe_array[pdn->pe_number];
+ WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table);
}
+static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
+ struct pci_dev *pdev, u64 dma_mask)
+{
+ struct pci_dn *pdn = pci_get_pdn(pdev);
+ struct pnv_ioda_pe *pe;
+ uint64_t top;
+ bool bypass = false;
+
+ if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
+ return -ENODEV;;
+
+ pe = &phb->ioda.pe_array[pdn->pe_number];
+ if (pe->tce_bypass_enabled) {
+ top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1;
+ bypass = (dma_mask >= top);
+ }
+
+ if (bypass) {
+ dev_info(&pdev->dev, "Using 64-bit DMA iommu bypass\n");
+ set_dma_ops(&pdev->dev, &dma_direct_ops);
+ set_dma_offset(&pdev->dev, pe->tce_bypass_base);
+ } else {
+ dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
+ set_dma_ops(&pdev->dev, &dma_iommu_ops);
+ set_iommu_table_base(&pdev->dev, &pe->tce32_table);
+ }
+ return 0;
+}
+
static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
{
struct pci_dev *dev;
@@ -657,6 +688,56 @@
__free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
}
+static void pnv_pci_ioda2_set_bypass(struct iommu_table *tbl, bool enable)
+{
+ struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
+ tce32_table);
+ uint16_t window_id = (pe->pe_number << 1 ) + 1;
+ int64_t rc;
+
+ pe_info(pe, "%sabling 64-bit DMA bypass\n", enable ? "En" : "Dis");
+ if (enable) {
+ phys_addr_t top = memblock_end_of_DRAM();
+
+ top = roundup_pow_of_two(top);
+ rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
+ pe->pe_number,
+ window_id,
+ pe->tce_bypass_base,
+ top);
+ } else {
+ rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
+ pe->pe_number,
+ window_id,
+ pe->tce_bypass_base,
+ 0);
+
+ /*
+ * We might want to reset the DMA ops of all devices on
+ * this PE. However in theory, that shouldn't be necessary
+ * as this is used for VFIO/KVM pass-through and the device
+ * hasn't yet been returned to its kernel driver
+ */
+ }
+ if (rc)
+ pe_err(pe, "OPAL error %lld configuring bypass window\n", rc);
+ else
+ pe->tce_bypass_enabled = enable;
+}
+
+static void pnv_pci_ioda2_setup_bypass_pe(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
+{
+ /* TVE #1 is selected by PCI address bit 59 */
+ pe->tce_bypass_base = 1ull << 59;
+
+ /* Install set_bypass callback for VFIO */
+ pe->tce32_table.set_bypass = pnv_pci_ioda2_set_bypass;
+
+ /* Enable bypass by default */
+ pnv_pci_ioda2_set_bypass(&pe->tce32_table, true);
+}
+
static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
struct pnv_ioda_pe *pe)
{
@@ -727,6 +808,8 @@
else
pnv_ioda_setup_bus_dma(pe, pe->pbus);
+ /* Also create a bypass window */
+ pnv_pci_ioda2_setup_bypass_pe(phb, pe);
return;
fail:
if (pe->tce32_seg >= 0)
@@ -1286,6 +1369,7 @@
/* Setup TCEs */
phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
+ phb->dma_set_mask = pnv_pci_ioda_dma_set_mask;
/* Setup shutdown function for kexec */
phb->shutdown = pnv_pci_ioda_shutdown;
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index b555ebc..95633d7 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -634,6 +634,16 @@
pnv_pci_dma_fallback_setup(hose, pdev);
}
+int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
+{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct pnv_phb *phb = hose->private_data;
+
+ if (phb && phb->dma_set_mask)
+ return phb->dma_set_mask(phb, pdev, dma_mask);
+ return __dma_set_mask(&pdev->dev, dma_mask);
+}
+
void pnv_pci_shutdown(void)
{
struct pci_controller *hose;
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 13f1942..cde1694 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -54,7 +54,9 @@
struct iommu_table tce32_table;
phys_addr_t tce_inval_reg_phys;
- /* XXX TODO: Add support for additional 64-bit iommus */
+ /* 64-bit TCE bypass region */
+ bool tce_bypass_enabled;
+ uint64_t tce_bypass_base;
/* MSIs. MVE index is identical for for 32 and 64 bit MSI
* and -1 if not supported. (It's actually identical to the
@@ -113,6 +115,8 @@
unsigned int hwirq, unsigned int virq,
unsigned int is_64, struct msi_msg *msg);
void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
+ int (*dma_set_mask)(struct pnv_phb *phb, struct pci_dev *pdev,
+ u64 dma_mask);
void (*fixup_phb)(struct pci_controller *hose);
u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
void (*shutdown)(struct pnv_phb *phb);
diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
index de6819b..0051e10 100644
--- a/arch/powerpc/platforms/powernv/powernv.h
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -7,12 +7,20 @@
static inline void pnv_smp_init(void) { }
#endif
+struct pci_dev;
+
#ifdef CONFIG_PCI
extern void pnv_pci_init(void);
extern void pnv_pci_shutdown(void);
+extern int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask);
#else
static inline void pnv_pci_init(void) { }
static inline void pnv_pci_shutdown(void) { }
+
+static inline int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
+{
+ return -ENODEV;
+}
#endif
extern void pnv_lpc_init(void);
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 21166f6..110f4fb 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -27,6 +27,7 @@
#include <linux/interrupt.h>
#include <linux/bug.h>
#include <linux/cpuidle.h>
+#include <linux/pci.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
@@ -141,6 +142,13 @@
{
}
+static int pnv_dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (dev_is_pci(dev))
+ return pnv_pci_dma_set_mask(to_pci_dev(dev), dma_mask);
+ return __dma_set_mask(dev, dma_mask);
+}
+
static void pnv_shutdown(void)
{
/* Let the PCI code clear up IODA tables */
@@ -238,6 +246,7 @@
.machine_shutdown = pnv_shutdown,
.power_save = powernv_idle,
.calibrate_decr = generic_calibrate_decr,
+ .dma_set_mask = pnv_dma_set_mask,
#ifdef CONFIG_KEXEC
.kexec_cpu_down = pnv_kexec_cpu_down,
#endif
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 37300f6..80b1d57 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -20,6 +20,7 @@
select PPC_DOORBELL
select HAVE_CONTEXT_TRACKING
select HOTPLUG_CPU if SMP
+ select ARCH_RANDOM
default y
config PPC_SPLPAR
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 8e639d7..972df0ff 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -430,8 +430,7 @@
{
long rc;
- if (firmware_has_feature(FW_FEATURE_SET_MODE) &&
- (image->type != KEXEC_TYPE_CRASH)) {
+ if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
rc = pSeries_disable_reloc_on_exc();
if (rc != H_SUCCESS)
pr_warning("Warning: Failed to disable relocation on "
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 0e166ed..8209744 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -886,25 +886,25 @@
/* Default: read HW settings */
if (flow_type == IRQ_TYPE_DEFAULT) {
- switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
- MPIC_INFO(VECPRI_SENSE_MASK))) {
- case MPIC_INFO(VECPRI_SENSE_EDGE) |
- MPIC_INFO(VECPRI_POLARITY_POSITIVE):
- flow_type = IRQ_TYPE_EDGE_RISING;
- break;
- case MPIC_INFO(VECPRI_SENSE_EDGE) |
- MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
- flow_type = IRQ_TYPE_EDGE_FALLING;
- break;
- case MPIC_INFO(VECPRI_SENSE_LEVEL) |
- MPIC_INFO(VECPRI_POLARITY_POSITIVE):
- flow_type = IRQ_TYPE_LEVEL_HIGH;
- break;
- case MPIC_INFO(VECPRI_SENSE_LEVEL) |
- MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
- flow_type = IRQ_TYPE_LEVEL_LOW;
- break;
- }
+ int vold_ps;
+
+ vold_ps = vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
+ MPIC_INFO(VECPRI_SENSE_MASK));
+
+ if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) |
+ MPIC_INFO(VECPRI_POLARITY_POSITIVE)))
+ flow_type = IRQ_TYPE_EDGE_RISING;
+ else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) |
+ MPIC_INFO(VECPRI_POLARITY_NEGATIVE)))
+ flow_type = IRQ_TYPE_EDGE_FALLING;
+ else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) |
+ MPIC_INFO(VECPRI_POLARITY_POSITIVE)))
+ flow_type = IRQ_TYPE_LEVEL_HIGH;
+ else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) |
+ MPIC_INFO(VECPRI_POLARITY_NEGATIVE)))
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+ else
+ WARN_ONCE(1, "mpic: unknown IRQ type %d\n", vold);
}
/* Apply to irq desc */
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index a90731b..b079098 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -309,16 +309,23 @@
if (xmon_speaker == me)
return;
+
for (;;) {
- if (xmon_speaker == 0) {
- last_speaker = cmpxchg(&xmon_speaker, 0, me);
- if (last_speaker == 0)
- return;
- }
- timeout = 10000000;
+ last_speaker = cmpxchg(&xmon_speaker, 0, me);
+ if (last_speaker == 0)
+ return;
+
+ /*
+ * Wait a full second for the lock, we might be on a slow
+ * console, but check every 100us.
+ */
+ timeout = 10000;
while (xmon_speaker == last_speaker) {
- if (--timeout > 0)
+ if (--timeout > 0) {
+ udelay(100);
continue;
+ }
+
/* hostile takeover */
prev = cmpxchg(&xmon_speaker, last_speaker, me);
if (prev == last_speaker)
@@ -397,7 +404,6 @@
}
xmon_fault_jmp[cpu] = recurse_jmp;
- cpumask_set_cpu(cpu, &cpus_in_xmon);
bp = NULL;
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT))
@@ -419,6 +425,8 @@
release_output_lock();
}
+ cpumask_set_cpu(cpu, &cpus_in_xmon);
+
waiting:
secondary = 1;
while (secondary && !xmon_gate) {
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 4c4a1ce..47c8630 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -529,6 +529,7 @@
{
int rc;
+ init_virt_timer(&appldata_timer);
appldata_timer.function = appldata_timer_function;
appldata_timer.data = (unsigned long) &appldata_work;
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index b3feabd..cf3c008 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -25,6 +25,7 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/spinlock.h>
#include "crypt_s390.h"
#define AES_KEYLEN_128 1
@@ -32,6 +33,7 @@
#define AES_KEYLEN_256 4
static u8 *ctrblk;
+static DEFINE_SPINLOCK(ctrblk_lock);
static char keylen_flag;
struct s390_aes_ctx {
@@ -758,43 +760,67 @@
return aes_set_key(tfm, in_key, key_len);
}
+static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes)
+{
+ unsigned int i, n;
+
+ /* only use complete blocks, max. PAGE_SIZE */
+ n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(AES_BLOCK_SIZE - 1);
+ for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) {
+ memcpy(ctrptr + i, ctrptr + i - AES_BLOCK_SIZE,
+ AES_BLOCK_SIZE);
+ crypto_inc(ctrptr + i, AES_BLOCK_SIZE);
+ }
+ return n;
+}
+
static int ctr_aes_crypt(struct blkcipher_desc *desc, long func,
struct s390_aes_ctx *sctx, struct blkcipher_walk *walk)
{
int ret = blkcipher_walk_virt_block(desc, walk, AES_BLOCK_SIZE);
- unsigned int i, n, nbytes;
- u8 buf[AES_BLOCK_SIZE];
- u8 *out, *in;
+ unsigned int n, nbytes;
+ u8 buf[AES_BLOCK_SIZE], ctrbuf[AES_BLOCK_SIZE];
+ u8 *out, *in, *ctrptr = ctrbuf;
if (!walk->nbytes)
return ret;
- memcpy(ctrblk, walk->iv, AES_BLOCK_SIZE);
+ if (spin_trylock(&ctrblk_lock))
+ ctrptr = ctrblk;
+
+ memcpy(ctrptr, walk->iv, AES_BLOCK_SIZE);
while ((nbytes = walk->nbytes) >= AES_BLOCK_SIZE) {
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
while (nbytes >= AES_BLOCK_SIZE) {
- /* only use complete blocks, max. PAGE_SIZE */
- n = (nbytes > PAGE_SIZE) ? PAGE_SIZE :
- nbytes & ~(AES_BLOCK_SIZE - 1);
- for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) {
- memcpy(ctrblk + i, ctrblk + i - AES_BLOCK_SIZE,
- AES_BLOCK_SIZE);
- crypto_inc(ctrblk + i, AES_BLOCK_SIZE);
- }
- ret = crypt_s390_kmctr(func, sctx->key, out, in, n, ctrblk);
- if (ret < 0 || ret != n)
+ if (ctrptr == ctrblk)
+ n = __ctrblk_init(ctrptr, nbytes);
+ else
+ n = AES_BLOCK_SIZE;
+ ret = crypt_s390_kmctr(func, sctx->key, out, in,
+ n, ctrptr);
+ if (ret < 0 || ret != n) {
+ if (ctrptr == ctrblk)
+ spin_unlock(&ctrblk_lock);
return -EIO;
+ }
if (n > AES_BLOCK_SIZE)
- memcpy(ctrblk, ctrblk + n - AES_BLOCK_SIZE,
+ memcpy(ctrptr, ctrptr + n - AES_BLOCK_SIZE,
AES_BLOCK_SIZE);
- crypto_inc(ctrblk, AES_BLOCK_SIZE);
+ crypto_inc(ctrptr, AES_BLOCK_SIZE);
out += n;
in += n;
nbytes -= n;
}
ret = blkcipher_walk_done(desc, walk, nbytes);
}
+ if (ctrptr == ctrblk) {
+ if (nbytes)
+ memcpy(ctrbuf, ctrptr, AES_BLOCK_SIZE);
+ else
+ memcpy(walk->iv, ctrptr, AES_BLOCK_SIZE);
+ spin_unlock(&ctrblk_lock);
+ }
/*
* final block may be < AES_BLOCK_SIZE, copy only nbytes
*/
@@ -802,14 +828,15 @@
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
ret = crypt_s390_kmctr(func, sctx->key, buf, in,
- AES_BLOCK_SIZE, ctrblk);
+ AES_BLOCK_SIZE, ctrbuf);
if (ret < 0 || ret != AES_BLOCK_SIZE)
return -EIO;
memcpy(out, buf, nbytes);
- crypto_inc(ctrblk, AES_BLOCK_SIZE);
+ crypto_inc(ctrbuf, AES_BLOCK_SIZE);
ret = blkcipher_walk_done(desc, walk, 0);
+ memcpy(walk->iv, ctrbuf, AES_BLOCK_SIZE);
}
- memcpy(walk->iv, ctrblk, AES_BLOCK_SIZE);
+
return ret;
}
diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index 200f2a1..0a5aac8 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -25,6 +25,7 @@
#define DES3_KEY_SIZE (3 * DES_KEY_SIZE)
static u8 *ctrblk;
+static DEFINE_SPINLOCK(ctrblk_lock);
struct s390_des_ctx {
u8 iv[DES_BLOCK_SIZE];
@@ -105,29 +106,35 @@
}
static int cbc_desall_crypt(struct blkcipher_desc *desc, long func,
- u8 *iv, struct blkcipher_walk *walk)
+ struct blkcipher_walk *walk)
{
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
int ret = blkcipher_walk_virt(desc, walk);
unsigned int nbytes = walk->nbytes;
+ struct {
+ u8 iv[DES_BLOCK_SIZE];
+ u8 key[DES3_KEY_SIZE];
+ } param;
if (!nbytes)
goto out;
- memcpy(iv, walk->iv, DES_BLOCK_SIZE);
+ memcpy(param.iv, walk->iv, DES_BLOCK_SIZE);
+ memcpy(param.key, ctx->key, DES3_KEY_SIZE);
do {
/* only use complete blocks */
unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1);
u8 *out = walk->dst.virt.addr;
u8 *in = walk->src.virt.addr;
- ret = crypt_s390_kmc(func, iv, out, in, n);
+ ret = crypt_s390_kmc(func, ¶m, out, in, n);
if (ret < 0 || ret != n)
return -EIO;
nbytes &= DES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, walk, nbytes);
} while ((nbytes = walk->nbytes));
- memcpy(walk->iv, iv, DES_BLOCK_SIZE);
+ memcpy(walk->iv, param.iv, DES_BLOCK_SIZE);
out:
return ret;
@@ -179,22 +186,20 @@
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, &walk);
}
static int cbc_des_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, &walk);
}
static struct crypto_alg cbc_des_alg = {
@@ -327,22 +332,20 @@
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, &walk);
}
static int cbc_des3_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, &walk);
}
static struct crypto_alg cbc_des3_alg = {
@@ -366,54 +369,80 @@
}
};
+static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes)
+{
+ unsigned int i, n;
+
+ /* align to block size, max. PAGE_SIZE */
+ n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(DES_BLOCK_SIZE - 1);
+ for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) {
+ memcpy(ctrptr + i, ctrptr + i - DES_BLOCK_SIZE, DES_BLOCK_SIZE);
+ crypto_inc(ctrptr + i, DES_BLOCK_SIZE);
+ }
+ return n;
+}
+
static int ctr_desall_crypt(struct blkcipher_desc *desc, long func,
- struct s390_des_ctx *ctx, struct blkcipher_walk *walk)
+ struct s390_des_ctx *ctx,
+ struct blkcipher_walk *walk)
{
int ret = blkcipher_walk_virt_block(desc, walk, DES_BLOCK_SIZE);
- unsigned int i, n, nbytes;
- u8 buf[DES_BLOCK_SIZE];
- u8 *out, *in;
+ unsigned int n, nbytes;
+ u8 buf[DES_BLOCK_SIZE], ctrbuf[DES_BLOCK_SIZE];
+ u8 *out, *in, *ctrptr = ctrbuf;
- memcpy(ctrblk, walk->iv, DES_BLOCK_SIZE);
+ if (!walk->nbytes)
+ return ret;
+
+ if (spin_trylock(&ctrblk_lock))
+ ctrptr = ctrblk;
+
+ memcpy(ctrptr, walk->iv, DES_BLOCK_SIZE);
while ((nbytes = walk->nbytes) >= DES_BLOCK_SIZE) {
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
while (nbytes >= DES_BLOCK_SIZE) {
- /* align to block size, max. PAGE_SIZE */
- n = (nbytes > PAGE_SIZE) ? PAGE_SIZE :
- nbytes & ~(DES_BLOCK_SIZE - 1);
- for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) {
- memcpy(ctrblk + i, ctrblk + i - DES_BLOCK_SIZE,
- DES_BLOCK_SIZE);
- crypto_inc(ctrblk + i, DES_BLOCK_SIZE);
- }
- ret = crypt_s390_kmctr(func, ctx->key, out, in, n, ctrblk);
- if (ret < 0 || ret != n)
+ if (ctrptr == ctrblk)
+ n = __ctrblk_init(ctrptr, nbytes);
+ else
+ n = DES_BLOCK_SIZE;
+ ret = crypt_s390_kmctr(func, ctx->key, out, in,
+ n, ctrptr);
+ if (ret < 0 || ret != n) {
+ if (ctrptr == ctrblk)
+ spin_unlock(&ctrblk_lock);
return -EIO;
+ }
if (n > DES_BLOCK_SIZE)
- memcpy(ctrblk, ctrblk + n - DES_BLOCK_SIZE,
+ memcpy(ctrptr, ctrptr + n - DES_BLOCK_SIZE,
DES_BLOCK_SIZE);
- crypto_inc(ctrblk, DES_BLOCK_SIZE);
+ crypto_inc(ctrptr, DES_BLOCK_SIZE);
out += n;
in += n;
nbytes -= n;
}
ret = blkcipher_walk_done(desc, walk, nbytes);
}
-
+ if (ctrptr == ctrblk) {
+ if (nbytes)
+ memcpy(ctrbuf, ctrptr, DES_BLOCK_SIZE);
+ else
+ memcpy(walk->iv, ctrptr, DES_BLOCK_SIZE);
+ spin_unlock(&ctrblk_lock);
+ }
/* final block may be < DES_BLOCK_SIZE, copy only nbytes */
if (nbytes) {
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
ret = crypt_s390_kmctr(func, ctx->key, buf, in,
- DES_BLOCK_SIZE, ctrblk);
+ DES_BLOCK_SIZE, ctrbuf);
if (ret < 0 || ret != DES_BLOCK_SIZE)
return -EIO;
memcpy(out, buf, nbytes);
- crypto_inc(ctrblk, DES_BLOCK_SIZE);
+ crypto_inc(ctrbuf, DES_BLOCK_SIZE);
ret = blkcipher_walk_done(desc, walk, 0);
+ memcpy(walk->iv, ctrbuf, DES_BLOCK_SIZE);
}
- memcpy(walk->iv, ctrblk, DES_BLOCK_SIZE);
return ret;
}
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index b9e25ae..d7c0050 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -59,7 +59,7 @@
.quad 0 # cr12: tracing off
.quad 0 # cr13: home space segment table
.quad 0xc0000000 # cr14: machine check handling off
- .quad 0 # cr15: linkage stack operations
+ .quad .Llinkage_stack # cr15: linkage stack operations
.Lpcmsk:.quad 0x0000000180000000
.L4malign:.quad 0xffffffffffc00000
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
@@ -67,12 +67,15 @@
.Lparmaddr:
.quad PARMAREA
.align 64
-.Lduct: .long 0,0,0,0,.Lduald,0,0,0
+.Lduct: .long 0,.Laste,.Laste,0,.Lduald,0,0,0
.long 0,0,0,0,0,0,0,0
+.Laste: .quad 0,0xffffffffffffffff,0,0,0,0,0,0
.align 128
.Lduald:.rept 8
.long 0x80000000,0,0,0 # invalid access-list entries
.endr
+.Llinkage_stack:
+ .long 0,0,0x89000000,0,0,0,0x8a000000,0
ENTRY(_ehead)
diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c
index a90d45e..27c50f4 100644
--- a/arch/s390/mm/page-states.c
+++ b/arch/s390/mm/page-states.c
@@ -12,6 +12,8 @@
#include <linux/mm.h>
#include <linux/gfp.h>
#include <linux/init.h>
+#include <asm/setup.h>
+#include <asm/ipl.h>
#define ESSA_SET_STABLE 1
#define ESSA_SET_UNUSED 2
@@ -41,6 +43,14 @@
if (!cmma_flag)
return;
+ /*
+ * Disable CMM for dump, otherwise the tprot based memory
+ * detection can fail because of unstable pages.
+ */
+ if (OLDMEM_BASE || ipl_info.type == IPL_TYPE_FCP_DUMP) {
+ cmma_flag = 0;
+ return;
+ }
asm volatile(
" .insn rrf,0xb9ab0000,%1,%1,0,0\n"
"0: la %0,0\n"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 940e50e..0af5250 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -444,6 +444,7 @@
bool "Intel MID platform support"
depends on X86_32
depends on X86_EXTENDED_PLATFORM
+ depends on X86_PLATFORM_DEVICES
depends on PCI
depends on PCI_GOANY
depends on X86_IO_APIC
@@ -1051,9 +1052,9 @@
This options enables microcode patch loading support for Intel
processors.
- For latest news and information on obtaining all the required
- Intel ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
+ For the current Intel microcode data package go to
+ <https://downloadcenter.intel.com> and search for
+ 'Linux Processor Microcode Data File'.
config MICROCODE_AMD
bool "AMD microcode loading support"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 0f3621e..321a52c 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -184,6 +184,7 @@
config X86_DECODER_SELFTEST
bool "x86 instruction decoder selftest"
depends on DEBUG_KERNEL && KPROBES
+ depends on !COMPILE_TEST
---help---
Perform x86 instruction decoder selftests at build time.
This option is useful for checking the sanity of x86 instruction
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index a54ee1d..aaac3b2 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -19,7 +19,7 @@
extern void amd_flush_garts(void);
extern int amd_numa_init(void);
extern int amd_get_subcaches(int);
-extern int amd_set_subcaches(int, int);
+extern int amd_set_subcaches(int, unsigned long);
struct amd_l3_cache {
unsigned indices;
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 3b978c4..3d6b9f8 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -132,6 +132,8 @@
extern void efi_sync_low_kernel_mappings(void);
extern void efi_setup_page_tables(void);
extern void __init old_map_region(efi_memory_desc_t *md);
+extern void __init runtime_code_page_mkexec(void);
+extern void __init efi_runtime_mkexec(void);
struct efi_setup_data {
u64 fw_vendor;
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index bbc8b12..5ad38ad 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -445,10 +445,20 @@
return a.pte == b.pte;
}
+static inline int pteval_present(pteval_t pteval)
+{
+ /*
+ * Yes Linus, _PAGE_PROTNONE == _PAGE_NUMA. Expressing it this
+ * way clearly states that the intent is that protnone and numa
+ * hinting ptes are considered present for the purposes of
+ * pagetable operations like zapping, protection changes, gup etc.
+ */
+ return pteval & (_PAGE_PRESENT | _PAGE_PROTNONE | _PAGE_NUMA);
+}
+
static inline int pte_present(pte_t a)
{
- return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE |
- _PAGE_NUMA);
+ return pteval_present(pte_flags(a));
}
#define pte_accessible pte_accessible
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index e6d90ba..04905bf 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -62,7 +62,7 @@
static inline void __flush_tlb_one(unsigned long addr)
{
- count_vm_event(NR_TLB_LOCAL_FLUSH_ONE);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
__flush_tlb_single(addr);
}
@@ -93,13 +93,13 @@
*/
static inline void __flush_tlb_up(void)
{
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
__flush_tlb();
}
static inline void flush_tlb_all(void)
{
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
__flush_tlb_all();
}
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 787e1bb..3e276eb 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -52,8 +52,7 @@
extern int m2p_add_override(unsigned long mfn, struct page *page,
struct gnttab_map_grant_ref *kmap_op);
extern int m2p_remove_override(struct page *page,
- struct gnttab_map_grant_ref *kmap_op,
- unsigned long mfn);
+ struct gnttab_map_grant_ref *kmap_op);
extern struct page *m2p_find_override(unsigned long mfn);
extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn);
@@ -122,7 +121,7 @@
pfn = m2p_find_override_pfn(mfn, ~0);
}
- /*
+ /*
* pfn is ~0 if there are no entries in the m2p for mfn or if the
* entry doesn't map back to the mfn and m2p_override doesn't have a
* valid entry for it.
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 59554dc..dec8de4 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -179,7 +179,7 @@
return (mask >> (4 * cuid)) & 0xf;
}
-int amd_set_subcaches(int cpu, int mask)
+int amd_set_subcaches(int cpu, unsigned long mask)
{
static unsigned int reset, ban;
struct amd_northbridge *nb = node_to_amd_nb(amd_get_nb_id(cpu));
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index d3153e2..c67ffa6 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -767,10 +767,7 @@
static void cpu_set_tlb_flushall_shift(struct cpuinfo_x86 *c)
{
- tlb_flushall_shift = 5;
-
- if (c->x86 <= 0x11)
- tlb_flushall_shift = 4;
+ tlb_flushall_shift = 6;
}
static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 24b6fd1..8e28bf2 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -284,8 +284,13 @@
raw_local_save_flags(eflags);
BUG_ON(eflags & X86_EFLAGS_AC);
- if (cpu_has(c, X86_FEATURE_SMAP))
+ if (cpu_has(c, X86_FEATURE_SMAP)) {
+#ifdef CONFIG_X86_SMAP
set_in_cr4(X86_CR4_SMAP);
+#else
+ clear_in_cr4(X86_CR4_SMAP);
+#endif
+ }
}
/*
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 3db61c6..5cd9bfa 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -640,21 +640,17 @@
case 0x61d: /* six-core 45 nm xeon "Dunnington" */
tlb_flushall_shift = -1;
break;
+ case 0x63a: /* Ivybridge */
+ tlb_flushall_shift = 2;
+ break;
case 0x61a: /* 45 nm nehalem, "Bloomfield" */
case 0x61e: /* 45 nm nehalem, "Lynnfield" */
case 0x625: /* 32 nm nehalem, "Clarkdale" */
case 0x62c: /* 32 nm nehalem, "Gulftown" */
case 0x62e: /* 45 nm nehalem-ex, "Beckton" */
case 0x62f: /* 32 nm Xeon E7 */
- tlb_flushall_shift = 6;
- break;
case 0x62a: /* SandyBridge */
case 0x62d: /* SandyBridge, "Romely-EP" */
- tlb_flushall_shift = 5;
- break;
- case 0x63a: /* Ivybridge */
- tlb_flushall_shift = 1;
- break;
default:
tlb_flushall_shift = 6;
}
diff --git a/arch/x86/kernel/cpu/microcode/amd_early.c b/arch/x86/kernel/cpu/microcode/amd_early.c
index 8384c0f..617a9e2 100644
--- a/arch/x86/kernel/cpu/microcode/amd_early.c
+++ b/arch/x86/kernel/cpu/microcode/amd_early.c
@@ -285,6 +285,15 @@
uci->cpu_sig.sig = cpuid_eax(0x00000001);
}
+
+static void __init get_bsp_sig(void)
+{
+ unsigned int bsp = boot_cpu_data.cpu_index;
+ struct ucode_cpu_info *uci = ucode_cpu_info + bsp;
+
+ if (!uci->cpu_sig.sig)
+ smp_call_function_single(bsp, collect_cpu_sig_on_bsp, NULL, 1);
+}
#else
void load_ucode_amd_ap(void)
{
@@ -337,31 +346,37 @@
int __init save_microcode_in_initrd_amd(void)
{
+ unsigned long cont;
enum ucode_state ret;
u32 eax;
-#ifdef CONFIG_X86_32
- unsigned int bsp = boot_cpu_data.cpu_index;
- struct ucode_cpu_info *uci = ucode_cpu_info + bsp;
+ if (!container)
+ return -EINVAL;
- if (!uci->cpu_sig.sig)
- smp_call_function_single(bsp, collect_cpu_sig_on_bsp, NULL, 1);
+#ifdef CONFIG_X86_32
+ get_bsp_sig();
+ cont = (unsigned long)container;
+#else
+ /*
+ * We need the physical address of the container for both bitness since
+ * boot_params.hdr.ramdisk_image is a physical address.
+ */
+ cont = __pa(container);
+#endif
/*
- * Take into account the fact that the ramdisk might get relocated
- * and therefore we need to recompute the container's position in
- * virtual memory space.
+ * Take into account the fact that the ramdisk might get relocated and
+ * therefore we need to recompute the container's position in virtual
+ * memory space.
*/
- container = (u8 *)(__va((u32)relocated_ramdisk) +
- ((u32)container - boot_params.hdr.ramdisk_image));
-#endif
+ if (relocated_ramdisk)
+ container = (u8 *)(__va(relocated_ramdisk) +
+ (cont - boot_params.hdr.ramdisk_image));
+
if (ucode_new_rev)
pr_info("microcode: updated early to new patch_level=0x%08x\n",
ucode_new_rev);
- if (!container)
- return -EINVAL;
-
eax = cpuid_eax(0x00000001);
eax = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff);
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index ce2d0a2..0e25a1b 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -683,7 +683,7 @@
}
/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
__flush_tlb();
/* Save MTRR state */
@@ -697,7 +697,7 @@
static void post_set(void) __releases(set_atomicity_lock)
{
/* Flush TLBs (no need to flush caches - they are disabled) */
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
__flush_tlb();
/* Intel (P6) standard MTRRs */
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index d4bdd25..e625319 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -77,8 +77,7 @@
return addr >= start && addr < end;
}
-static int
-do_ftrace_mod_code(unsigned long ip, const void *new_code)
+static unsigned long text_ip_addr(unsigned long ip)
{
/*
* On x86_64, kernel text mappings are mapped read-only with
@@ -91,7 +90,7 @@
if (within(ip, (unsigned long)_text, (unsigned long)_etext))
ip = (unsigned long)__va(__pa_symbol(ip));
- return probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE);
+ return ip;
}
static const unsigned char *ftrace_nop_replace(void)
@@ -123,8 +122,10 @@
if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
return -EINVAL;
+ ip = text_ip_addr(ip);
+
/* replace the text with the new text */
- if (do_ftrace_mod_code(ip, new_code))
+ if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE))
return -EPERM;
sync_core();
@@ -221,37 +222,51 @@
return -EINVAL;
}
-int ftrace_update_ftrace_func(ftrace_func_t func)
+static unsigned long ftrace_update_func;
+
+static int update_ftrace_func(unsigned long ip, void *new)
{
- unsigned long ip = (unsigned long)(&ftrace_call);
- unsigned char old[MCOUNT_INSN_SIZE], *new;
+ unsigned char old[MCOUNT_INSN_SIZE];
int ret;
- memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
- new = ftrace_call_replace(ip, (unsigned long)func);
+ memcpy(old, (void *)ip, MCOUNT_INSN_SIZE);
+
+ ftrace_update_func = ip;
+ /* Make sure the breakpoints see the ftrace_update_func update */
+ smp_wmb();
/* See comment above by declaration of modifying_ftrace_code */
atomic_inc(&modifying_ftrace_code);
ret = ftrace_modify_code(ip, old, new);
+ atomic_dec(&modifying_ftrace_code);
+
+ return ret;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+ unsigned long ip = (unsigned long)(&ftrace_call);
+ unsigned char *new;
+ int ret;
+
+ new = ftrace_call_replace(ip, (unsigned long)func);
+ ret = update_ftrace_func(ip, new);
+
/* Also update the regs callback function */
if (!ret) {
ip = (unsigned long)(&ftrace_regs_call);
- memcpy(old, &ftrace_regs_call, MCOUNT_INSN_SIZE);
new = ftrace_call_replace(ip, (unsigned long)func);
- ret = ftrace_modify_code(ip, old, new);
+ ret = update_ftrace_func(ip, new);
}
- atomic_dec(&modifying_ftrace_code);
-
return ret;
}
static int is_ftrace_caller(unsigned long ip)
{
- if (ip == (unsigned long)(&ftrace_call) ||
- ip == (unsigned long)(&ftrace_regs_call))
+ if (ip == ftrace_update_func)
return 1;
return 0;
@@ -677,45 +692,41 @@
#ifdef CONFIG_DYNAMIC_FTRACE
extern void ftrace_graph_call(void);
-static int ftrace_mod_jmp(unsigned long ip,
- int old_offset, int new_offset)
+static unsigned char *ftrace_jmp_replace(unsigned long ip, unsigned long addr)
{
- unsigned char code[MCOUNT_INSN_SIZE];
+ static union ftrace_code_union calc;
- if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
+ /* Jmp not a call (ignore the .e8) */
+ calc.e8 = 0xe9;
+ calc.offset = ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr);
- if (code[0] != 0xe9 || old_offset != *(int *)(&code[1]))
- return -EINVAL;
+ /*
+ * ftrace external locks synchronize the access to the static variable.
+ */
+ return calc.code;
+}
- *(int *)(&code[1]) = new_offset;
+static int ftrace_mod_jmp(unsigned long ip, void *func)
+{
+ unsigned char *new;
- if (do_ftrace_mod_code(ip, &code))
- return -EPERM;
+ new = ftrace_jmp_replace(ip, (unsigned long)func);
- return 0;
+ return update_ftrace_func(ip, new);
}
int ftrace_enable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
- int old_offset, new_offset;
- old_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
- new_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
-
- return ftrace_mod_jmp(ip, old_offset, new_offset);
+ return ftrace_mod_jmp(ip, &ftrace_graph_caller);
}
int ftrace_disable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
- int old_offset, new_offset;
- old_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
- new_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
-
- return ftrace_mod_jmp(ip, old_offset, new_offset);
+ return ftrace_mod_jmp(ip, &ftrace_stub);
}
#endif /* !CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index dbb6087..d99f31d 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -266,6 +266,14 @@
EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
#ifdef CONFIG_HOTPLUG_CPU
+
+/* These two declarations are only used in check_irq_vectors_for_cpu_disable()
+ * below, which is protected by stop_machine(). Putting them on the stack
+ * results in a stack frame overflow. Dynamically allocating could result in a
+ * failure so declare these two cpumasks as global.
+ */
+static struct cpumask affinity_new, online_new;
+
/*
* This cpu is going to be removed and its vectors migrated to the remaining
* online cpus. Check to see if there are enough vectors in the remaining cpus.
@@ -277,7 +285,6 @@
unsigned int this_cpu, vector, this_count, count;
struct irq_desc *desc;
struct irq_data *data;
- struct cpumask affinity_new, online_new;
this_cpu = smp_processor_id();
cpumask_copy(&online_new, cpu_online_mask);
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 04ee1e2..7c6acd4 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -571,3 +571,40 @@
quirk_amd_nb_node);
#endif
+
+#ifdef CONFIG_PCI
+/*
+ * Processor does not ensure DRAM scrub read/write sequence
+ * is atomic wrt accesses to CC6 save state area. Therefore
+ * if a concurrent scrub read/write access is to same address
+ * the entry may appear as if it is not written. This quirk
+ * applies to Fam16h models 00h-0Fh
+ *
+ * See "Revision Guide" for AMD F16h models 00h-0fh,
+ * document 51810 rev. 3.04, Nov 2013
+ */
+static void amd_disable_seq_and_redirect_scrub(struct pci_dev *dev)
+{
+ u32 val;
+
+ /*
+ * Suggested workaround:
+ * set D18F3x58[4:0] = 00h and set D18F3x5C[0] = 0b
+ */
+ pci_read_config_dword(dev, 0x58, &val);
+ if (val & 0x1F) {
+ val &= ~(0x1F);
+ pci_write_config_dword(dev, 0x58, val);
+ }
+
+ pci_read_config_dword(dev, 0x5C, &val);
+ if (val & BIT(0)) {
+ val &= ~BIT(0);
+ pci_write_config_dword(dev, 0x5c, val);
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3,
+ amd_disable_seq_and_redirect_scrub);
+
+#endif
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 19e5adb..acb3b60 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -209,7 +209,7 @@
* dance when its actually needed.
*/
- preempt_disable();
+ preempt_disable_notrace();
data = this_cpu_read(cyc2ns.head);
tail = this_cpu_read(cyc2ns.tail);
@@ -229,7 +229,7 @@
if (!--data->__count)
this_cpu_write(cyc2ns.tail, data);
}
- preempt_enable();
+ preempt_enable_notrace();
return ns;
}
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 9d591c8..6dea040 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -1001,6 +1001,12 @@
static inline bool smap_violation(int error_code, struct pt_regs *regs)
{
+ if (!IS_ENABLED(CONFIG_X86_SMAP))
+ return false;
+
+ if (!static_cpu_has(X86_FEATURE_SMAP))
+ return false;
+
if (error_code & PF_USER)
return false;
@@ -1087,11 +1093,9 @@
if (unlikely(error_code & PF_RSVD))
pgtable_bad(regs, error_code, address);
- if (static_cpu_has(X86_FEATURE_SMAP)) {
- if (unlikely(smap_violation(error_code, regs))) {
- bad_area_nosemaphore(regs, error_code, address);
- return;
- }
+ if (unlikely(smap_violation(error_code, regs))) {
+ bad_area_nosemaphore(regs, error_code, address);
+ return;
}
/*
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 81b2750..27aa0455 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -493,14 +493,6 @@
struct numa_memblk *mb = &mi->blk[i];
memblock_set_node(mb->start, mb->end - mb->start,
&memblock.memory, mb->nid);
-
- /*
- * At this time, all memory regions reserved by memblock are
- * used by the kernel. Set the nid in memblock.reserved will
- * mark out all the nodes the kernel resides in.
- */
- memblock_set_node(mb->start, mb->end - mb->start,
- &memblock.reserved, mb->nid);
}
/*
@@ -565,10 +557,21 @@
static void __init numa_clear_kernel_node_hotplug(void)
{
int i, nid;
- nodemask_t numa_kernel_nodes;
+ nodemask_t numa_kernel_nodes = NODE_MASK_NONE;
unsigned long start, end;
struct memblock_type *type = &memblock.reserved;
+ /*
+ * At this time, all memory regions reserved by memblock are
+ * used by the kernel. Set the nid in memblock.reserved will
+ * mark out all the nodes the kernel resides in.
+ */
+ for (i = 0; i < numa_meminfo.nr_blks; i++) {
+ struct numa_memblk *mb = &numa_meminfo.blk[i];
+ memblock_set_node(mb->start, mb->end - mb->start,
+ &memblock.reserved, mb->nid);
+ }
+
/* Mark all kernel nodes. */
for (i = 0; i < type->cnt; i++)
node_set(type->regions[i].nid, numa_kernel_nodes);
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index 0342d27..47b6436 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -52,6 +52,8 @@
nid, start, end);
printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid);
printk(KERN_DEBUG " ");
+ start = round_down(start, PAGES_PER_SECTION);
+ end = round_up(end, PAGES_PER_SECTION);
for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) {
physnode_map[pfn / PAGES_PER_SECTION] = nid;
printk(KERN_CONT "%lx ", pfn);
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index 1a25187..1953e9c 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -42,15 +42,25 @@
return acpi_numa < 0;
}
-/* Callback for SLIT parsing */
+/*
+ * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for
+ * I/O localities since SRAT does not list them. I/O localities are
+ * not supported at this point.
+ */
void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
{
int i, j;
- for (i = 0; i < slit->locality_count; i++)
- for (j = 0; j < slit->locality_count; j++)
+ for (i = 0; i < slit->locality_count; i++) {
+ if (pxm_to_node(i) == NUMA_NO_NODE)
+ continue;
+ for (j = 0; j < slit->locality_count; j++) {
+ if (pxm_to_node(j) == NUMA_NO_NODE)
+ continue;
numa_set_distance(pxm_to_node(i), pxm_to_node(j),
slit->entry[slit->locality_count * i + j]);
+ }
+ }
}
/* Callback for Proximity Domain -> x2APIC mapping */
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index ae699b3..dd8dda1 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -103,7 +103,7 @@
if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
return;
- count_vm_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
+ count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
if (f->flush_end == TLB_FLUSH_ALL)
local_flush_tlb();
@@ -131,7 +131,7 @@
info.flush_start = start;
info.flush_end = end;
- count_vm_event(NR_TLB_REMOTE_FLUSH);
+ count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
if (is_uv_system()) {
unsigned int cpu;
@@ -151,44 +151,19 @@
preempt_disable();
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
preempt_enable();
}
-/*
- * It can find out the THP large page, or
- * HUGETLB page in tlb_flush when THP disabled
- */
-static inline unsigned long has_large_page(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- unsigned long addr = ALIGN(start, HPAGE_SIZE);
- for (; addr < end; addr += HPAGE_SIZE) {
- pgd = pgd_offset(mm, addr);
- if (likely(!pgd_none(*pgd))) {
- pud = pud_offset(pgd, addr);
- if (likely(!pud_none(*pud))) {
- pmd = pmd_offset(pud, addr);
- if (likely(!pmd_none(*pmd)))
- if (pmd_large(*pmd))
- return addr;
- }
- }
- }
- return 0;
-}
-
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long vmflag)
{
unsigned long addr;
unsigned act_entries, tlb_entries = 0;
+ unsigned long nr_base_pages;
preempt_disable();
if (current->active_mm != mm)
@@ -210,21 +185,20 @@
tlb_entries = tlb_lli_4k[ENTRIES];
else
tlb_entries = tlb_lld_4k[ENTRIES];
+
/* Assume all of TLB entries was occupied by this task */
- act_entries = mm->total_vm > tlb_entries ? tlb_entries : mm->total_vm;
+ act_entries = tlb_entries >> tlb_flushall_shift;
+ act_entries = mm->total_vm > act_entries ? act_entries : mm->total_vm;
+ nr_base_pages = (end - start) >> PAGE_SHIFT;
/* tlb_flushall_shift is on balance point, details in commit log */
- if ((end - start) >> PAGE_SHIFT > act_entries >> tlb_flushall_shift) {
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ if (nr_base_pages > act_entries) {
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
} else {
- if (has_large_page(mm, start, end)) {
- local_flush_tlb();
- goto flush_all;
- }
/* flush range by one by one 'invlpg' */
for (addr = start; addr < end; addr += PAGE_SIZE) {
- count_vm_event(NR_TLB_LOCAL_FLUSH_ONE);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
__flush_tlb_single(addr);
}
@@ -262,7 +236,7 @@
static void do_flush_tlb_all(void *info)
{
- count_vm_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
+ count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
__flush_tlb_all();
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
leave_mm(smp_processor_id());
@@ -270,7 +244,7 @@
void flush_tlb_all(void)
{
- count_vm_event(NR_TLB_REMOTE_FLUSH);
+ count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
on_each_cpu(do_flush_tlb_all, NULL, 1);
}
diff --git a/arch/x86/platform/efi/efi-bgrt.c b/arch/x86/platform/efi/efi-bgrt.c
index 7145ec6..f15103d 100644
--- a/arch/x86/platform/efi/efi-bgrt.c
+++ b/arch/x86/platform/efi/efi-bgrt.c
@@ -42,14 +42,15 @@
if (bgrt_tab->header.length < sizeof(*bgrt_tab))
return;
- if (bgrt_tab->version != 1)
+ if (bgrt_tab->version != 1 || bgrt_tab->status != 1)
return;
if (bgrt_tab->image_type != 0 || !bgrt_tab->image_address)
return;
image = efi_lookup_mapped_addr(bgrt_tab->image_address);
if (!image) {
- image = ioremap(bgrt_tab->image_address, sizeof(bmp_header));
+ image = early_memremap(bgrt_tab->image_address,
+ sizeof(bmp_header));
ioremapped = true;
if (!image)
return;
@@ -57,7 +58,7 @@
memcpy_fromio(&bmp_header, image, sizeof(bmp_header));
if (ioremapped)
- iounmap(image);
+ early_iounmap(image, sizeof(bmp_header));
bgrt_image_size = bmp_header.size;
bgrt_image = kmalloc(bgrt_image_size, GFP_KERNEL);
@@ -65,7 +66,8 @@
return;
if (ioremapped) {
- image = ioremap(bgrt_tab->image_address, bmp_header.size);
+ image = early_memremap(bgrt_tab->image_address,
+ bmp_header.size);
if (!image) {
kfree(bgrt_image);
bgrt_image = NULL;
@@ -75,5 +77,5 @@
memcpy_fromio(bgrt_image, image, bgrt_image_size);
if (ioremapped)
- iounmap(image);
+ early_iounmap(image, bmp_header.size);
}
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index d62ec87..1a201ac 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -792,7 +792,7 @@
set_memory_nx(addr, npages);
}
-static void __init runtime_code_page_mkexec(void)
+void __init runtime_code_page_mkexec(void)
{
efi_memory_desc_t *md;
void *p;
@@ -1069,8 +1069,7 @@
efi.update_capsule = virt_efi_update_capsule;
efi.query_capsule_caps = virt_efi_query_capsule_caps;
- if (efi_enabled(EFI_OLD_MEMMAP) && (__supported_pte_mask & _PAGE_NX))
- runtime_code_page_mkexec();
+ efi_runtime_mkexec();
kfree(new_memmap);
diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c
index 249b183..0b74cdf 100644
--- a/arch/x86/platform/efi/efi_32.c
+++ b/arch/x86/platform/efi/efi_32.c
@@ -77,3 +77,9 @@
local_irq_restore(efi_rt_eflags);
}
+
+void __init efi_runtime_mkexec(void)
+{
+ if (__supported_pte_mask & _PAGE_NX)
+ runtime_code_page_mkexec();
+}
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 6284f15..0c2a234 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -233,3 +233,12 @@
{
efi_setup = phys_addr + sizeof(struct setup_data);
}
+
+void __init efi_runtime_mkexec(void)
+{
+ if (!efi_enabled(EFI_OLD_MEMMAP))
+ return;
+
+ if (__supported_pte_mask & _PAGE_NX)
+ runtime_code_page_mkexec();
+}
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index a4d7b64..201d09a 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1473,6 +1473,18 @@
* X86_CR0_TS, X86_CR0_PE, X86_CR0_ET are set by Xen for HVM guests
* (which PVH shared codepaths), while X86_CR0_PG is for PVH. */
write_cr0(read_cr0() | X86_CR0_MP | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM);
+
+ if (!cpu)
+ return;
+ /*
+ * For BSP, PSE PGE are set in probe_page_size_mask(), for APs
+ * set them here. For all, OSFXSR OSXMMEXCPT are set in fpu_init.
+ */
+ if (cpu_has_pse)
+ set_in_cr4(X86_CR4_PSE);
+
+ if (cpu_has_pge)
+ set_in_cr4(X86_CR4_PGE);
}
/*
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 2423ef0..256282e 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -365,7 +365,7 @@
/* Assume pteval_t is equivalent to all the other *val_t types. */
static pteval_t pte_mfn_to_pfn(pteval_t val)
{
- if (val & _PAGE_PRESENT) {
+ if (pteval_present(val)) {
unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
unsigned long pfn = mfn_to_pfn(mfn);
@@ -381,7 +381,7 @@
static pteval_t pte_pfn_to_mfn(pteval_t val)
{
- if (val & _PAGE_PRESENT) {
+ if (pteval_present(val)) {
unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
pteval_t flags = val & PTE_FLAGS_MASK;
unsigned long mfn;
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index 8009acb..696c694 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -899,6 +899,13 @@
"m2p_add_override: pfn %lx not mapped", pfn))
return -EINVAL;
}
+ WARN_ON(PagePrivate(page));
+ SetPagePrivate(page);
+ set_page_private(page, mfn);
+ page->index = pfn_to_mfn(pfn);
+
+ if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn))))
+ return -ENOMEM;
if (kmap_op != NULL) {
if (!PageHighMem(page)) {
@@ -937,16 +944,19 @@
}
EXPORT_SYMBOL_GPL(m2p_add_override);
int m2p_remove_override(struct page *page,
- struct gnttab_map_grant_ref *kmap_op,
- unsigned long mfn)
+ struct gnttab_map_grant_ref *kmap_op)
{
unsigned long flags;
+ unsigned long mfn;
unsigned long pfn;
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
pfn = page_to_pfn(page);
+ mfn = get_phys_to_machine(pfn);
+ if (mfn == INVALID_P2M_ENTRY || !(mfn & FOREIGN_FRAME_BIT))
+ return -EINVAL;
if (!PageHighMem(page)) {
address = (unsigned long)__va(pfn << PAGE_SHIFT);
@@ -960,7 +970,10 @@
spin_lock_irqsave(&m2p_override_lock, flags);
list_del(&page->lru);
spin_unlock_irqrestore(&m2p_override_lock, flags);
+ WARN_ON(!PagePrivate(page));
+ ClearPagePrivate(page);
+ set_phys_to_machine(pfn, page->index);
if (kmap_op != NULL) {
if (!PageHighMem(page)) {
struct multicall_space mcs;
diff --git a/block/blk-core.c b/block/blk-core.c
index c00e0bd..853f927 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -693,11 +693,20 @@
if (!uninit_q)
return NULL;
+ uninit_q->flush_rq = kzalloc(sizeof(struct request), GFP_KERNEL);
+ if (!uninit_q->flush_rq)
+ goto out_cleanup_queue;
+
q = blk_init_allocated_queue(uninit_q, rfn, lock);
if (!q)
- blk_cleanup_queue(uninit_q);
-
+ goto out_free_flush_rq;
return q;
+
+out_free_flush_rq:
+ kfree(uninit_q->flush_rq);
+out_cleanup_queue:
+ blk_cleanup_queue(uninit_q);
+ return NULL;
}
EXPORT_SYMBOL(blk_init_queue_node);
@@ -1127,7 +1136,7 @@
struct request *blk_get_request(struct request_queue *q, int rw, gfp_t gfp_mask)
{
if (q->mq_ops)
- return blk_mq_alloc_request(q, rw, gfp_mask, false);
+ return blk_mq_alloc_request(q, rw, gfp_mask);
else
return blk_old_get_request(q, rw, gfp_mask);
}
@@ -1278,6 +1287,11 @@
if (unlikely(!q))
return;
+ if (q->mq_ops) {
+ blk_mq_free_request(req);
+ return;
+ }
+
blk_pm_put_request(req);
elv_completed_request(q, req);
diff --git a/block/blk-exec.c b/block/blk-exec.c
index bbfc072..c68613b 100644
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -65,7 +65,7 @@
* be resued after dying flag is set
*/
if (q->mq_ops) {
- blk_mq_insert_request(q, rq, true);
+ blk_mq_insert_request(q, rq, at_head, true);
return;
}
diff --git a/block/blk-flush.c b/block/blk-flush.c
index 9288aaf..66e2b69 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -130,20 +130,26 @@
blk_clear_rq_complete(rq);
}
-static void mq_flush_data_run(struct work_struct *work)
+static void mq_flush_run(struct work_struct *work)
{
struct request *rq;
- rq = container_of(work, struct request, mq_flush_data);
+ rq = container_of(work, struct request, mq_flush_work);
memset(&rq->csd, 0, sizeof(rq->csd));
blk_mq_run_request(rq, true, false);
}
-static void blk_mq_flush_data_insert(struct request *rq)
+static bool blk_flush_queue_rq(struct request *rq)
{
- INIT_WORK(&rq->mq_flush_data, mq_flush_data_run);
- kblockd_schedule_work(rq->q, &rq->mq_flush_data);
+ if (rq->q->mq_ops) {
+ INIT_WORK(&rq->mq_flush_work, mq_flush_run);
+ kblockd_schedule_work(rq->q, &rq->mq_flush_work);
+ return false;
+ } else {
+ list_add_tail(&rq->queuelist, &rq->q->queue_head);
+ return true;
+ }
}
/**
@@ -187,12 +193,7 @@
case REQ_FSEQ_DATA:
list_move_tail(&rq->flush.list, &q->flush_data_in_flight);
- if (q->mq_ops)
- blk_mq_flush_data_insert(rq);
- else {
- list_add(&rq->queuelist, &q->queue_head);
- queued = true;
- }
+ queued = blk_flush_queue_rq(rq);
break;
case REQ_FSEQ_DONE:
@@ -216,9 +217,6 @@
}
kicked = blk_kick_flush(q);
- /* blk_mq_run_flush will run queue */
- if (q->mq_ops)
- return queued;
return kicked | queued;
}
@@ -230,10 +228,9 @@
struct request *rq, *n;
unsigned long flags = 0;
- if (q->mq_ops) {
- blk_mq_free_request(flush_rq);
+ if (q->mq_ops)
spin_lock_irqsave(&q->mq_flush_lock, flags);
- }
+
running = &q->flush_queue[q->flush_running_idx];
BUG_ON(q->flush_pending_idx == q->flush_running_idx);
@@ -263,49 +260,14 @@
* kblockd.
*/
if (queued || q->flush_queue_delayed) {
- if (!q->mq_ops)
- blk_run_queue_async(q);
- else
- /*
- * This can be optimized to only run queues with requests
- * queued if necessary.
- */
- blk_mq_run_queues(q, true);
+ WARN_ON(q->mq_ops);
+ blk_run_queue_async(q);
}
q->flush_queue_delayed = 0;
if (q->mq_ops)
spin_unlock_irqrestore(&q->mq_flush_lock, flags);
}
-static void mq_flush_work(struct work_struct *work)
-{
- struct request_queue *q;
- struct request *rq;
-
- q = container_of(work, struct request_queue, mq_flush_work);
-
- /* We don't need set REQ_FLUSH_SEQ, it's for consistency */
- rq = blk_mq_alloc_request(q, WRITE_FLUSH|REQ_FLUSH_SEQ,
- __GFP_WAIT|GFP_ATOMIC, true);
- rq->cmd_type = REQ_TYPE_FS;
- rq->end_io = flush_end_io;
-
- blk_mq_run_request(rq, true, false);
-}
-
-/*
- * We can't directly use q->flush_rq, because it doesn't have tag and is not in
- * hctx->rqs[]. so we must allocate a new request, since we can't sleep here,
- * so offload the work to workqueue.
- *
- * Note: we assume a flush request finished in any hardware queue will flush
- * the whole disk cache.
- */
-static void mq_run_flush(struct request_queue *q)
-{
- kblockd_schedule_work(q, &q->mq_flush_work);
-}
-
/**
* blk_kick_flush - consider issuing flush request
* @q: request_queue being kicked
@@ -340,19 +302,31 @@
* different from running_idx, which means flush is in flight.
*/
q->flush_pending_idx ^= 1;
+
if (q->mq_ops) {
- mq_run_flush(q);
- return true;
+ struct blk_mq_ctx *ctx = first_rq->mq_ctx;
+ struct blk_mq_hw_ctx *hctx = q->mq_ops->map_queue(q, ctx->cpu);
+
+ blk_mq_rq_init(hctx, q->flush_rq);
+ q->flush_rq->mq_ctx = ctx;
+
+ /*
+ * Reuse the tag value from the fist waiting request,
+ * with blk-mq the tag is generated during request
+ * allocation and drivers can rely on it being inside
+ * the range they asked for.
+ */
+ q->flush_rq->tag = first_rq->tag;
+ } else {
+ blk_rq_init(q, q->flush_rq);
}
- blk_rq_init(q, &q->flush_rq);
- q->flush_rq.cmd_type = REQ_TYPE_FS;
- q->flush_rq.cmd_flags = WRITE_FLUSH | REQ_FLUSH_SEQ;
- q->flush_rq.rq_disk = first_rq->rq_disk;
- q->flush_rq.end_io = flush_end_io;
+ q->flush_rq->cmd_type = REQ_TYPE_FS;
+ q->flush_rq->cmd_flags = WRITE_FLUSH | REQ_FLUSH_SEQ;
+ q->flush_rq->rq_disk = first_rq->rq_disk;
+ q->flush_rq->end_io = flush_end_io;
- list_add_tail(&q->flush_rq.queuelist, &q->queue_head);
- return true;
+ return blk_flush_queue_rq(q->flush_rq);
}
static void flush_data_end_io(struct request *rq, int error)
@@ -558,5 +532,4 @@
void blk_mq_init_flush(struct request_queue *q)
{
spin_lock_init(&q->mq_flush_lock);
- INIT_WORK(&q->mq_flush_work, mq_flush_work);
}
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 2da76c9..97a733c 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -119,6 +119,14 @@
atomic_inc(&bb.done);
submit_bio(type, bio);
+
+ /*
+ * We can loop for a long time in here, if someone does
+ * full device discards (like mkfs). Be nice and allow
+ * us to schedule out to avoid softlocking if preempt
+ * is disabled.
+ */
+ cond_resched();
}
blk_finish_plug(&plug);
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 8f8adaa..6c583f9 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -21,6 +21,16 @@
if (!bio)
return 0;
+ /*
+ * This should probably be returning 0, but blk_add_request_payload()
+ * (Christoph!!!!)
+ */
+ if (bio->bi_rw & REQ_DISCARD)
+ return 1;
+
+ if (bio->bi_rw & REQ_WRITE_SAME)
+ return 1;
+
fbio = bio;
cluster = blk_queue_cluster(q);
seg_size = 0;
@@ -161,6 +171,48 @@
*bvprv = *bvec;
}
+static int __blk_bios_map_sg(struct request_queue *q, struct bio *bio,
+ struct scatterlist *sglist,
+ struct scatterlist **sg)
+{
+ struct bio_vec bvec, bvprv = { NULL };
+ struct bvec_iter iter;
+ int nsegs, cluster;
+
+ nsegs = 0;
+ cluster = blk_queue_cluster(q);
+
+ if (bio->bi_rw & REQ_DISCARD) {
+ /*
+ * This is a hack - drivers should be neither modifying the
+ * biovec, nor relying on bi_vcnt - but because of
+ * blk_add_request_payload(), a discard bio may or may not have
+ * a payload we need to set up here (thank you Christoph) and
+ * bi_vcnt is really the only way of telling if we need to.
+ */
+
+ if (bio->bi_vcnt)
+ goto single_segment;
+
+ return 0;
+ }
+
+ if (bio->bi_rw & REQ_WRITE_SAME) {
+single_segment:
+ *sg = sglist;
+ bvec = bio_iovec(bio);
+ sg_set_page(*sg, bvec.bv_page, bvec.bv_len, bvec.bv_offset);
+ return 1;
+ }
+
+ for_each_bio(bio)
+ bio_for_each_segment(bvec, bio, iter)
+ __blk_segment_map_sg(q, &bvec, sglist, &bvprv, sg,
+ &nsegs, &cluster);
+
+ return nsegs;
+}
+
/*
* map a request to scatterlist, return number of sg entries setup. Caller
* must make sure sg can hold rq->nr_phys_segments entries
@@ -168,23 +220,11 @@
int blk_rq_map_sg(struct request_queue *q, struct request *rq,
struct scatterlist *sglist)
{
- struct bio_vec bvec, bvprv = { NULL };
- struct req_iterator iter;
- struct scatterlist *sg;
- int nsegs, cluster;
+ struct scatterlist *sg = NULL;
+ int nsegs = 0;
- nsegs = 0;
- cluster = blk_queue_cluster(q);
-
- /*
- * for each bio in rq
- */
- sg = NULL;
- rq_for_each_segment(bvec, rq, iter) {
- __blk_segment_map_sg(q, &bvec, sglist, &bvprv, &sg,
- &nsegs, &cluster);
- } /* segments in rq */
-
+ if (rq->bio)
+ nsegs = __blk_bios_map_sg(q, rq->bio, sglist, &sg);
if (unlikely(rq->cmd_flags & REQ_COPY_USER) &&
(blk_rq_bytes(rq) & q->dma_pad_mask)) {
@@ -230,20 +270,13 @@
int blk_bio_map_sg(struct request_queue *q, struct bio *bio,
struct scatterlist *sglist)
{
- struct bio_vec bvec, bvprv = { NULL };
- struct scatterlist *sg;
- int nsegs, cluster;
- struct bvec_iter iter;
+ struct scatterlist *sg = NULL;
+ int nsegs;
+ struct bio *next = bio->bi_next;
+ bio->bi_next = NULL;
- nsegs = 0;
- cluster = blk_queue_cluster(q);
-
- sg = NULL;
- bio_for_each_segment(bvec, bio, iter) {
- __blk_segment_map_sg(q, &bvec, sglist, &bvprv, &sg,
- &nsegs, &cluster);
- } /* segments in bio */
-
+ nsegs = __blk_bios_map_sg(q, bio, sglist, &sg);
+ bio->bi_next = next;
if (sg)
sg_mark_end(sg);
diff --git a/block/blk-mq-tag.c b/block/blk-mq-tag.c
index 5d70edc..83ae96c 100644
--- a/block/blk-mq-tag.c
+++ b/block/blk-mq-tag.c
@@ -184,7 +184,7 @@
ssize_t blk_mq_tag_sysfs_show(struct blk_mq_tags *tags, char *page)
{
char *orig_page = page;
- int cpu;
+ unsigned int cpu;
if (!tags)
return 0;
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 57039fc..1fa9dd1 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -226,15 +226,14 @@
return rq;
}
-struct request *blk_mq_alloc_request(struct request_queue *q, int rw,
- gfp_t gfp, bool reserved)
+struct request *blk_mq_alloc_request(struct request_queue *q, int rw, gfp_t gfp)
{
struct request *rq;
if (blk_mq_queue_enter(q))
return NULL;
- rq = blk_mq_alloc_request_pinned(q, rw, gfp, reserved);
+ rq = blk_mq_alloc_request_pinned(q, rw, gfp, false);
if (rq)
blk_mq_put_ctx(rq->mq_ctx);
return rq;
@@ -258,7 +257,7 @@
/*
* Re-init and set pdu, if we have it
*/
-static void blk_mq_rq_init(struct blk_mq_hw_ctx *hctx, struct request *rq)
+void blk_mq_rq_init(struct blk_mq_hw_ctx *hctx, struct request *rq)
{
blk_rq_init(hctx->queue, rq);
@@ -305,7 +304,7 @@
bio_endio(bio, error);
}
-void blk_mq_complete_request(struct request *rq, int error)
+void blk_mq_end_io(struct request *rq, int error)
{
struct bio *bio = rq->bio;
unsigned int bytes = 0;
@@ -330,48 +329,55 @@
else
blk_mq_free_request(rq);
}
+EXPORT_SYMBOL(blk_mq_end_io);
-void __blk_mq_end_io(struct request *rq, int error)
-{
- if (!blk_mark_rq_complete(rq))
- blk_mq_complete_request(rq, error);
-}
-
-static void blk_mq_end_io_remote(void *data)
+static void __blk_mq_complete_request_remote(void *data)
{
struct request *rq = data;
- __blk_mq_end_io(rq, rq->errors);
+ rq->q->softirq_done_fn(rq);
}
-/*
- * End IO on this request on a multiqueue enabled driver. We'll either do
- * it directly inline, or punt to a local IPI handler on the matching
- * remote CPU.
- */
-void blk_mq_end_io(struct request *rq, int error)
+void __blk_mq_complete_request(struct request *rq)
{
struct blk_mq_ctx *ctx = rq->mq_ctx;
int cpu;
- if (!ctx->ipi_redirect)
- return __blk_mq_end_io(rq, error);
+ if (!ctx->ipi_redirect) {
+ rq->q->softirq_done_fn(rq);
+ return;
+ }
cpu = get_cpu();
if (cpu != ctx->cpu && cpu_online(ctx->cpu)) {
- rq->errors = error;
- rq->csd.func = blk_mq_end_io_remote;
+ rq->csd.func = __blk_mq_complete_request_remote;
rq->csd.info = rq;
rq->csd.flags = 0;
__smp_call_function_single(ctx->cpu, &rq->csd, 0);
} else {
- __blk_mq_end_io(rq, error);
+ rq->q->softirq_done_fn(rq);
}
put_cpu();
}
-EXPORT_SYMBOL(blk_mq_end_io);
-static void blk_mq_start_request(struct request *rq)
+/**
+ * blk_mq_complete_request - end I/O on a request
+ * @rq: the request being processed
+ *
+ * Description:
+ * Ends all I/O on a request. It does not handle partial completions.
+ * The actual completion happens out-of-order, through a IPI handler.
+ **/
+void blk_mq_complete_request(struct request *rq)
+{
+ if (unlikely(blk_should_fake_timeout(rq->q)))
+ return;
+ if (!blk_mark_rq_complete(rq))
+ __blk_mq_complete_request(rq);
+}
+EXPORT_SYMBOL(blk_mq_complete_request);
+
+static void blk_mq_start_request(struct request *rq, bool last)
{
struct request_queue *q = rq->q;
@@ -384,6 +390,25 @@
*/
rq->deadline = jiffies + q->rq_timeout;
set_bit(REQ_ATOM_STARTED, &rq->atomic_flags);
+
+ if (q->dma_drain_size && blk_rq_bytes(rq)) {
+ /*
+ * Make sure space for the drain appears. We know we can do
+ * this because max_hw_segments has been adjusted to be one
+ * fewer than the device can handle.
+ */
+ rq->nr_phys_segments++;
+ }
+
+ /*
+ * Flag the last request in the series so that drivers know when IO
+ * should be kicked off, if they don't do it on a per-request basis.
+ *
+ * Note: the flag isn't the only condition drivers should do kick off.
+ * If drive is busy, the last request might not have the bit set.
+ */
+ if (last)
+ rq->cmd_flags |= REQ_END;
}
static void blk_mq_requeue_request(struct request *rq)
@@ -392,6 +417,11 @@
trace_block_rq_requeue(q, rq);
clear_bit(REQ_ATOM_STARTED, &rq->atomic_flags);
+
+ rq->cmd_flags &= ~REQ_END;
+
+ if (q->dma_drain_size && blk_rq_bytes(rq))
+ rq->nr_phys_segments--;
}
struct blk_mq_timeout_data {
@@ -559,19 +589,8 @@
rq = list_first_entry(&rq_list, struct request, queuelist);
list_del_init(&rq->queuelist);
- blk_mq_start_request(rq);
- /*
- * Last request in the series. Flag it as such, this
- * enables drivers to know when IO should be kicked off,
- * if they don't do it on a per-request basis.
- *
- * Note: the flag isn't the only condition drivers
- * should do kick off. If drive is busy, the last
- * request might not have the bit set.
- */
- if (list_empty(&rq_list))
- rq->cmd_flags |= REQ_END;
+ blk_mq_start_request(rq, list_empty(&rq_list));
ret = q->mq_ops->queue_rq(hctx, rq);
switch (ret) {
@@ -589,8 +608,8 @@
break;
default:
pr_err("blk-mq: bad return on queue: %d\n", ret);
- rq->errors = -EIO;
case BLK_MQ_RQ_QUEUE_ERROR:
+ rq->errors = -EIO;
blk_mq_end_io(rq, rq->errors);
break;
}
@@ -693,13 +712,16 @@
}
static void __blk_mq_insert_request(struct blk_mq_hw_ctx *hctx,
- struct request *rq)
+ struct request *rq, bool at_head)
{
struct blk_mq_ctx *ctx = rq->mq_ctx;
trace_block_rq_insert(hctx->queue, rq);
- list_add_tail(&rq->queuelist, &ctx->rq_list);
+ if (at_head)
+ list_add(&rq->queuelist, &ctx->rq_list);
+ else
+ list_add_tail(&rq->queuelist, &ctx->rq_list);
blk_mq_hctx_mark_pending(hctx, ctx);
/*
@@ -709,7 +731,7 @@
}
void blk_mq_insert_request(struct request_queue *q, struct request *rq,
- bool run_queue)
+ bool at_head, bool run_queue)
{
struct blk_mq_hw_ctx *hctx;
struct blk_mq_ctx *ctx, *current_ctx;
@@ -728,7 +750,7 @@
rq->mq_ctx = ctx;
}
spin_lock(&ctx->lock);
- __blk_mq_insert_request(hctx, rq);
+ __blk_mq_insert_request(hctx, rq, at_head);
spin_unlock(&ctx->lock);
blk_mq_put_ctx(current_ctx);
@@ -760,7 +782,7 @@
/* ctx->cpu might be offline */
spin_lock(&ctx->lock);
- __blk_mq_insert_request(hctx, rq);
+ __blk_mq_insert_request(hctx, rq, false);
spin_unlock(&ctx->lock);
blk_mq_put_ctx(current_ctx);
@@ -798,7 +820,7 @@
rq = list_first_entry(list, struct request, queuelist);
list_del_init(&rq->queuelist);
rq->mq_ctx = ctx;
- __blk_mq_insert_request(hctx, rq);
+ __blk_mq_insert_request(hctx, rq, false);
}
spin_unlock(&ctx->lock);
@@ -888,6 +910,11 @@
blk_queue_bounce(q, &bio);
+ if (bio_integrity_enabled(bio) && bio_integrity_prep(bio)) {
+ bio_endio(bio, -EIO);
+ return;
+ }
+
if (use_plug && blk_attempt_plug_merge(q, bio, &request_count))
return;
@@ -950,7 +977,7 @@
__blk_mq_free_request(hctx, ctx, rq);
else {
blk_mq_bio_to_request(rq, bio);
- __blk_mq_insert_request(hctx, rq);
+ __blk_mq_insert_request(hctx, rq, false);
}
spin_unlock(&ctx->lock);
@@ -1309,15 +1336,6 @@
reg->queue_depth = BLK_MQ_MAX_DEPTH;
}
- /*
- * Set aside a tag for flush requests. It will only be used while
- * another flush request is in progress but outside the driver.
- *
- * TODO: only allocate if flushes are supported
- */
- reg->queue_depth++;
- reg->reserved_tags++;
-
if (reg->queue_depth < (reg->reserved_tags + BLK_MQ_TAG_MIN))
return ERR_PTR(-EINVAL);
@@ -1360,17 +1378,27 @@
q->mq_ops = reg->ops;
q->queue_flags |= QUEUE_FLAG_MQ_DEFAULT;
+ q->sg_reserved_size = INT_MAX;
+
blk_queue_make_request(q, blk_mq_make_request);
blk_queue_rq_timed_out(q, reg->ops->timeout);
if (reg->timeout)
blk_queue_rq_timeout(q, reg->timeout);
+ if (reg->ops->complete)
+ blk_queue_softirq_done(q, reg->ops->complete);
+
blk_mq_init_flush(q);
blk_mq_init_cpu_queues(q, reg->nr_hw_queues);
- if (blk_mq_init_hw_queues(q, reg, driver_data))
+ q->flush_rq = kzalloc(round_up(sizeof(struct request) + reg->cmd_size,
+ cache_line_size()), GFP_KERNEL);
+ if (!q->flush_rq)
goto err_hw;
+ if (blk_mq_init_hw_queues(q, reg, driver_data))
+ goto err_flush_rq;
+
blk_mq_map_swqueue(q);
mutex_lock(&all_q_mutex);
@@ -1378,6 +1406,9 @@
mutex_unlock(&all_q_mutex);
return q;
+
+err_flush_rq:
+ kfree(q->flush_rq);
err_hw:
kfree(q->mq_map);
err_map:
diff --git a/block/blk-mq.h b/block/blk-mq.h
index 5c39179..ed0035c 100644
--- a/block/blk-mq.h
+++ b/block/blk-mq.h
@@ -22,13 +22,13 @@
struct kobject kobj;
};
-void __blk_mq_end_io(struct request *rq, int error);
-void blk_mq_complete_request(struct request *rq, int error);
+void __blk_mq_complete_request(struct request *rq);
void blk_mq_run_request(struct request *rq, bool run_queue, bool async);
void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async);
void blk_mq_init_flush(struct request_queue *q);
void blk_mq_drain_queue(struct request_queue *q);
void blk_mq_free_queue(struct request_queue *q);
+void blk_mq_rq_init(struct blk_mq_hw_ctx *hctx, struct request *rq);
/*
* CPU hotplug helpers
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 8095c4a..7500f87 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -549,6 +549,8 @@
if (q->mq_ops)
blk_mq_free_queue(q);
+ kfree(q->flush_rq);
+
blk_trace_shutdown(q);
bdi_destroy(&q->backing_dev_info);
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index bba81c9..d96f7061 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -91,7 +91,7 @@
case BLK_EH_HANDLED:
/* Can we use req->errors here? */
if (q->mq_ops)
- blk_mq_complete_request(req, req->errors);
+ __blk_mq_complete_request(req);
else
__blk_complete_request(req);
break;
diff --git a/block/blk.h b/block/blk.h
index c90e1d8..d23b415 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -113,7 +113,7 @@
q->flush_queue_delayed = 1;
return NULL;
}
- if (unlikely(blk_queue_dying(q)) ||
+ if (unlikely(blk_queue_bypass(q)) ||
!q->elevator->type->ops.elevator_dispatch_fn(q, 0))
return NULL;
}
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 470e754..018a428 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -549,7 +549,7 @@
{
unsigned long x;
struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
- if (sscanf(buf, "%ld\n", &x) == 1)
+ if (sscanf(buf, "%lu\n", &x) == 1)
battery->alarm = x/1000;
if (acpi_battery_present(battery))
acpi_battery_set_alarm(battery);
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 0b6ae6e..368f9dd 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -79,9 +79,10 @@
ACPI_COMPANION_SET(dev, adev);
dev->release = acpi_container_release;
ret = device_register(dev);
- if (ret)
+ if (ret) {
+ put_device(dev);
return ret;
-
+ }
adev->driver_data = dev;
return 1;
}
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index c431c88..e9b3081 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -609,7 +609,7 @@
static void dock_notify(struct dock_station *ds, u32 event)
{
acpi_handle handle = ds->handle;
- struct acpi_device *ad;
+ struct acpi_device *adev = NULL;
int surprise_removal = 0;
/*
@@ -632,7 +632,8 @@
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
- if (!dock_in_progress(ds) && acpi_bus_get_device(handle, &ad)) {
+ acpi_bus_get_device(handle, &adev);
+ if (!dock_in_progress(ds) && !acpi_device_enumerated(adev)) {
begin_dock(ds);
dock(ds);
if (!dock_present(ds)) {
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index 50fe34f..75c28ea 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -60,7 +60,7 @@
seq_printf(seq, "%c%-8s %s:%s\n",
dev->wakeup.flags.run_wake ? '*' : ' ',
(device_may_wakeup(&dev->dev) ||
- (ldev && device_may_wakeup(ldev))) ?
+ device_may_wakeup(ldev)) ?
"enabled" : "disabled",
ldev->bus ? ldev->bus->name :
"no-bus", dev_name(ldev));
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 7384158..57b053f 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -484,7 +484,6 @@
static void acpi_hotplug_notify_cb(acpi_handle handle, u32 type, void *data)
{
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE;
- struct acpi_scan_handler *handler = data;
struct acpi_device *adev;
acpi_status status;
@@ -500,7 +499,10 @@
break;
case ACPI_NOTIFY_EJECT_REQUEST:
acpi_handle_debug(handle, "ACPI_NOTIFY_EJECT_REQUEST event\n");
- if (!handler->hotplug.enabled) {
+ if (!adev->handler)
+ goto err_out;
+
+ if (!adev->handler->hotplug.enabled) {
acpi_handle_err(handle, "Eject disabled\n");
ost_code = ACPI_OST_SC_EJECT_NOT_SUPPORTED;
goto err_out;
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 0347a37..85e3b61 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -99,10 +99,6 @@
union acpi_object *element = &(package->package.elements[i]);
- if (!element) {
- return AE_BAD_DATA;
- }
-
switch (element->type) {
case ACPI_TYPE_INTEGER:
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index f0447d3..a697b77 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -170,6 +170,14 @@
},
{
.callback = video_detect_force_vendor,
+ .ident = "HP EliteBook Revolve 810",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook Revolve 810 G1"),
+ },
+ },
+ {
+ .callback = video_detect_force_vendor,
.ident = "Lenovo Yoga 13",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 20a7517..52b8181 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4126,12 +4126,14 @@
clk_prepare_enable(hpriv->port_clks[port]);
sprintf(port_number, "port%d", port);
- hpriv->port_phys[port] = devm_phy_get(&pdev->dev, port_number);
+ hpriv->port_phys[port] = devm_phy_optional_get(&pdev->dev,
+ port_number);
if (IS_ERR(hpriv->port_phys[port])) {
rc = PTR_ERR(hpriv->port_phys[port]);
hpriv->port_phys[port] = NULL;
- if ((rc != -EPROBE_DEFER) && (rc != -ENODEV))
- dev_warn(&pdev->dev, "error getting phy");
+ if (rc != -EPROBE_DEFER)
+ dev_warn(&pdev->dev, "error getting phy %d",
+ rc);
goto err;
} else
phy_power_on(hpriv->port_phys[port]);
diff --git a/drivers/base/component.c b/drivers/base/component.c
index c53efe6..c477899 100644
--- a/drivers/base/component.c
+++ b/drivers/base/component.c
@@ -133,9 +133,16 @@
goto out;
}
+ if (!devres_open_group(master->dev, NULL, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
/* Found all components */
ret = master->ops->bind(master->dev);
if (ret < 0) {
+ devres_release_group(master->dev, NULL);
+ dev_info(master->dev, "master bind failed: %d\n", ret);
master_remove_components(master);
goto out;
}
@@ -166,6 +173,7 @@
{
if (master->bound) {
master->ops->unbind(master->dev);
+ devres_release_group(master->dev, NULL);
master->bound = false;
}
diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c
index 3107282..091b9ea 100644
--- a/drivers/block/null_blk.c
+++ b/drivers/block/null_blk.c
@@ -60,7 +60,9 @@
NULL_IRQ_NONE = 0,
NULL_IRQ_SOFTIRQ = 1,
NULL_IRQ_TIMER = 2,
+};
+enum {
NULL_Q_BIO = 0,
NULL_Q_RQ = 1,
NULL_Q_MQ = 2,
@@ -172,18 +174,20 @@
static void end_cmd(struct nullb_cmd *cmd)
{
- if (cmd->rq) {
- if (queue_mode == NULL_Q_MQ)
- blk_mq_end_io(cmd->rq, 0);
- else {
- INIT_LIST_HEAD(&cmd->rq->queuelist);
- blk_end_request_all(cmd->rq, 0);
- }
- } else if (cmd->bio)
+ switch (queue_mode) {
+ case NULL_Q_MQ:
+ blk_mq_end_io(cmd->rq, 0);
+ return;
+ case NULL_Q_RQ:
+ INIT_LIST_HEAD(&cmd->rq->queuelist);
+ blk_end_request_all(cmd->rq, 0);
+ break;
+ case NULL_Q_BIO:
bio_endio(cmd->bio, 0);
+ break;
+ }
- if (queue_mode != NULL_Q_MQ)
- free_cmd(cmd);
+ free_cmd(cmd);
}
static enum hrtimer_restart null_cmd_timer_expired(struct hrtimer *timer)
@@ -195,6 +199,7 @@
cq = &per_cpu(completion_queues, smp_processor_id());
while ((entry = llist_del_all(&cq->list)) != NULL) {
+ entry = llist_reverse_order(entry);
do {
cmd = container_of(entry, struct nullb_cmd, ll_list);
end_cmd(cmd);
@@ -221,62 +226,32 @@
static void null_softirq_done_fn(struct request *rq)
{
- blk_end_request_all(rq, 0);
+ end_cmd(rq->special);
}
-#ifdef CONFIG_SMP
-
-static void null_ipi_cmd_end_io(void *data)
-{
- struct completion_queue *cq;
- struct llist_node *entry, *next;
- struct nullb_cmd *cmd;
-
- cq = &per_cpu(completion_queues, smp_processor_id());
-
- entry = llist_del_all(&cq->list);
-
- while (entry) {
- next = entry->next;
- cmd = llist_entry(entry, struct nullb_cmd, ll_list);
- end_cmd(cmd);
- entry = next;
- }
-}
-
-static void null_cmd_end_ipi(struct nullb_cmd *cmd)
-{
- struct call_single_data *data = &cmd->csd;
- int cpu = get_cpu();
- struct completion_queue *cq = &per_cpu(completion_queues, cpu);
-
- cmd->ll_list.next = NULL;
-
- if (llist_add(&cmd->ll_list, &cq->list)) {
- data->func = null_ipi_cmd_end_io;
- data->flags = 0;
- __smp_call_function_single(cpu, data, 0);
- }
-
- put_cpu();
-}
-
-#endif /* CONFIG_SMP */
-
static inline void null_handle_cmd(struct nullb_cmd *cmd)
{
/* Complete IO by inline, softirq or timer */
switch (irqmode) {
+ case NULL_IRQ_SOFTIRQ:
+ switch (queue_mode) {
+ case NULL_Q_MQ:
+ blk_mq_complete_request(cmd->rq);
+ break;
+ case NULL_Q_RQ:
+ blk_complete_request(cmd->rq);
+ break;
+ case NULL_Q_BIO:
+ /*
+ * XXX: no proper submitting cpu information available.
+ */
+ end_cmd(cmd);
+ break;
+ }
+ break;
case NULL_IRQ_NONE:
end_cmd(cmd);
break;
- case NULL_IRQ_SOFTIRQ:
-#ifdef CONFIG_SMP
- null_cmd_end_ipi(cmd);
-#else
- end_cmd(cmd);
-#endif
- break;
case NULL_IRQ_TIMER:
null_cmd_end_timer(cmd);
break;
@@ -411,6 +386,7 @@
.queue_rq = null_queue_rq,
.map_queue = blk_mq_map_queue,
.init_hctx = null_init_hctx,
+ .complete = null_softirq_done_fn,
};
static struct blk_mq_reg null_mq_reg = {
@@ -609,13 +585,6 @@
{
unsigned int i;
-#if !defined(CONFIG_SMP)
- if (irqmode == NULL_IRQ_SOFTIRQ) {
- pr_warn("null_blk: softirq completions not available.\n");
- pr_warn("null_blk: using direct completions.\n");
- irqmode = NULL_IRQ_NONE;
- }
-#endif
if (bs > PAGE_SIZE) {
pr_warn("null_blk: invalid block size\n");
pr_warn("null_blk: defaults block size to %lu\n", PAGE_SIZE);
diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c
index 1f14ac4..51824d1 100644
--- a/drivers/block/nvme-core.c
+++ b/drivers/block/nvme-core.c
@@ -46,7 +46,6 @@
#define NVME_Q_DEPTH 1024
#define SQ_SIZE(depth) (depth * sizeof(struct nvme_command))
#define CQ_SIZE(depth) (depth * sizeof(struct nvme_completion))
-#define NVME_MINORS 64
#define ADMIN_TIMEOUT (60 * HZ)
static int nvme_major;
@@ -58,6 +57,17 @@
static DEFINE_SPINLOCK(dev_list_lock);
static LIST_HEAD(dev_list);
static struct task_struct *nvme_thread;
+static struct workqueue_struct *nvme_workq;
+
+static void nvme_reset_failed_dev(struct work_struct *ws);
+
+struct async_cmd_info {
+ struct kthread_work work;
+ struct kthread_worker *worker;
+ u32 result;
+ int status;
+ void *ctx;
+};
/*
* An NVM Express queue. Each device has at least two (one for admin
@@ -66,6 +76,7 @@
struct nvme_queue {
struct device *q_dmadev;
struct nvme_dev *dev;
+ char irqname[24]; /* nvme4294967295-65535\0 */
spinlock_t q_lock;
struct nvme_command *sq_cmds;
volatile struct nvme_completion *cqes;
@@ -80,9 +91,11 @@
u16 sq_head;
u16 sq_tail;
u16 cq_head;
+ u16 qid;
u8 cq_phase;
u8 cqe_seen;
u8 q_suspended;
+ struct async_cmd_info cmdinfo;
unsigned long cmdid_data[];
};
@@ -97,6 +110,7 @@
BUILD_BUG_ON(sizeof(struct nvme_delete_queue) != 64);
BUILD_BUG_ON(sizeof(struct nvme_features) != 64);
BUILD_BUG_ON(sizeof(struct nvme_format_cmd) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_abort_cmd) != 64);
BUILD_BUG_ON(sizeof(struct nvme_command) != 64);
BUILD_BUG_ON(sizeof(struct nvme_id_ctrl) != 4096);
BUILD_BUG_ON(sizeof(struct nvme_id_ns) != 4096);
@@ -111,6 +125,7 @@
nvme_completion_fn fn;
void *ctx;
unsigned long timeout;
+ int aborted;
};
static struct nvme_cmd_info *nvme_cmd_info(struct nvme_queue *nvmeq)
@@ -154,6 +169,7 @@
info[cmdid].fn = handler;
info[cmdid].ctx = ctx;
info[cmdid].timeout = jiffies + timeout;
+ info[cmdid].aborted = 0;
return cmdid;
}
@@ -172,6 +188,7 @@
#define CMD_CTX_COMPLETED (0x310 + CMD_CTX_BASE)
#define CMD_CTX_INVALID (0x314 + CMD_CTX_BASE)
#define CMD_CTX_FLUSH (0x318 + CMD_CTX_BASE)
+#define CMD_CTX_ABORT (0x31C + CMD_CTX_BASE)
static void special_completion(struct nvme_dev *dev, void *ctx,
struct nvme_completion *cqe)
@@ -180,6 +197,10 @@
return;
if (ctx == CMD_CTX_FLUSH)
return;
+ if (ctx == CMD_CTX_ABORT) {
+ ++dev->abort_limit;
+ return;
+ }
if (ctx == CMD_CTX_COMPLETED) {
dev_warn(&dev->pci_dev->dev,
"completed id %d twice on queue %d\n",
@@ -196,6 +217,15 @@
dev_warn(&dev->pci_dev->dev, "Unknown special completion %p\n", ctx);
}
+static void async_completion(struct nvme_dev *dev, void *ctx,
+ struct nvme_completion *cqe)
+{
+ struct async_cmd_info *cmdinfo = ctx;
+ cmdinfo->result = le32_to_cpup(&cqe->result);
+ cmdinfo->status = le16_to_cpup(&cqe->status) >> 1;
+ queue_kthread_work(cmdinfo->worker, &cmdinfo->work);
+}
+
/*
* Called with local interrupts disabled and the q_lock held. May not sleep.
*/
@@ -693,7 +723,7 @@
if (head == nvmeq->cq_head && phase == nvmeq->cq_phase)
return 0;
- writel(head, nvmeq->q_db + (1 << nvmeq->dev->db_stride));
+ writel(head, nvmeq->q_db + nvmeq->dev->db_stride);
nvmeq->cq_head = head;
nvmeq->cq_phase = phase;
@@ -804,12 +834,34 @@
return cmdinfo.status;
}
+static int nvme_submit_async_cmd(struct nvme_queue *nvmeq,
+ struct nvme_command *cmd,
+ struct async_cmd_info *cmdinfo, unsigned timeout)
+{
+ int cmdid;
+
+ cmdid = alloc_cmdid_killable(nvmeq, cmdinfo, async_completion, timeout);
+ if (cmdid < 0)
+ return cmdid;
+ cmdinfo->status = -EINTR;
+ cmd->common.command_id = cmdid;
+ nvme_submit_cmd(nvmeq, cmd);
+ return 0;
+}
+
int nvme_submit_admin_cmd(struct nvme_dev *dev, struct nvme_command *cmd,
u32 *result)
{
return nvme_submit_sync_cmd(dev->queues[0], cmd, result, ADMIN_TIMEOUT);
}
+static int nvme_submit_admin_cmd_async(struct nvme_dev *dev,
+ struct nvme_command *cmd, struct async_cmd_info *cmdinfo)
+{
+ return nvme_submit_async_cmd(dev->queues[0], cmd, cmdinfo,
+ ADMIN_TIMEOUT);
+}
+
static int adapter_delete_queue(struct nvme_dev *dev, u8 opcode, u16 id)
{
int status;
@@ -920,6 +972,56 @@
}
/**
+ * nvme_abort_cmd - Attempt aborting a command
+ * @cmdid: Command id of a timed out IO
+ * @queue: The queue with timed out IO
+ *
+ * Schedule controller reset if the command was already aborted once before and
+ * still hasn't been returned to the driver, or if this is the admin queue.
+ */
+static void nvme_abort_cmd(int cmdid, struct nvme_queue *nvmeq)
+{
+ int a_cmdid;
+ struct nvme_command cmd;
+ struct nvme_dev *dev = nvmeq->dev;
+ struct nvme_cmd_info *info = nvme_cmd_info(nvmeq);
+
+ if (!nvmeq->qid || info[cmdid].aborted) {
+ if (work_busy(&dev->reset_work))
+ return;
+ list_del_init(&dev->node);
+ dev_warn(&dev->pci_dev->dev,
+ "I/O %d QID %d timeout, reset controller\n", cmdid,
+ nvmeq->qid);
+ PREPARE_WORK(&dev->reset_work, nvme_reset_failed_dev);
+ queue_work(nvme_workq, &dev->reset_work);
+ return;
+ }
+
+ if (!dev->abort_limit)
+ return;
+
+ a_cmdid = alloc_cmdid(dev->queues[0], CMD_CTX_ABORT, special_completion,
+ ADMIN_TIMEOUT);
+ if (a_cmdid < 0)
+ return;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.abort.opcode = nvme_admin_abort_cmd;
+ cmd.abort.cid = cmdid;
+ cmd.abort.sqid = cpu_to_le16(nvmeq->qid);
+ cmd.abort.command_id = a_cmdid;
+
+ --dev->abort_limit;
+ info[cmdid].aborted = 1;
+ info[cmdid].timeout = jiffies + ADMIN_TIMEOUT;
+
+ dev_warn(nvmeq->q_dmadev, "Aborting I/O %d QID %d\n", cmdid,
+ nvmeq->qid);
+ nvme_submit_cmd(dev->queues[0], &cmd);
+}
+
+/**
* nvme_cancel_ios - Cancel outstanding I/Os
* @queue: The queue to cancel I/Os on
* @timeout: True to only cancel I/Os which have timed out
@@ -942,7 +1044,12 @@
continue;
if (info[cmdid].ctx == CMD_CTX_CANCELLED)
continue;
- dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d\n", cmdid);
+ if (timeout && nvmeq->dev->initialized) {
+ nvme_abort_cmd(cmdid, nvmeq);
+ continue;
+ }
+ dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d QID %d\n", cmdid,
+ nvmeq->qid);
ctx = cancel_cmdid(nvmeq, cmdid, &fn);
fn(nvmeq->dev, ctx, &cqe);
}
@@ -964,26 +1071,31 @@
kfree(nvmeq);
}
-static void nvme_free_queues(struct nvme_dev *dev)
+static void nvme_free_queues(struct nvme_dev *dev, int lowest)
{
int i;
- for (i = dev->queue_count - 1; i >= 0; i--) {
+ for (i = dev->queue_count - 1; i >= lowest; i--) {
nvme_free_queue(dev->queues[i]);
dev->queue_count--;
dev->queues[i] = NULL;
}
}
-static void nvme_disable_queue(struct nvme_dev *dev, int qid)
+/**
+ * nvme_suspend_queue - put queue into suspended state
+ * @nvmeq - queue to suspend
+ *
+ * Returns 1 if already suspended, 0 otherwise.
+ */
+static int nvme_suspend_queue(struct nvme_queue *nvmeq)
{
- struct nvme_queue *nvmeq = dev->queues[qid];
- int vector = dev->entry[nvmeq->cq_vector].vector;
+ int vector = nvmeq->dev->entry[nvmeq->cq_vector].vector;
spin_lock_irq(&nvmeq->q_lock);
if (nvmeq->q_suspended) {
spin_unlock_irq(&nvmeq->q_lock);
- return;
+ return 1;
}
nvmeq->q_suspended = 1;
spin_unlock_irq(&nvmeq->q_lock);
@@ -991,18 +1103,35 @@
irq_set_affinity_hint(vector, NULL);
free_irq(vector, nvmeq);
- /* Don't tell the adapter to delete the admin queue */
- if (qid) {
- adapter_delete_sq(dev, qid);
- adapter_delete_cq(dev, qid);
- }
+ return 0;
+}
+static void nvme_clear_queue(struct nvme_queue *nvmeq)
+{
spin_lock_irq(&nvmeq->q_lock);
nvme_process_cq(nvmeq);
nvme_cancel_ios(nvmeq, false);
spin_unlock_irq(&nvmeq->q_lock);
}
+static void nvme_disable_queue(struct nvme_dev *dev, int qid)
+{
+ struct nvme_queue *nvmeq = dev->queues[qid];
+
+ if (!nvmeq)
+ return;
+ if (nvme_suspend_queue(nvmeq))
+ return;
+
+ /* Don't tell the adapter to delete the admin queue.
+ * Don't tell a removed adapter to delete IO queues. */
+ if (qid && readl(&dev->bar->csts) != -1) {
+ adapter_delete_sq(dev, qid);
+ adapter_delete_cq(dev, qid);
+ }
+ nvme_clear_queue(nvmeq);
+}
+
static struct nvme_queue *nvme_alloc_queue(struct nvme_dev *dev, int qid,
int depth, int vector)
{
@@ -1025,15 +1154,18 @@
nvmeq->q_dmadev = dmadev;
nvmeq->dev = dev;
+ snprintf(nvmeq->irqname, sizeof(nvmeq->irqname), "nvme%dq%d",
+ dev->instance, qid);
spin_lock_init(&nvmeq->q_lock);
nvmeq->cq_head = 0;
nvmeq->cq_phase = 1;
init_waitqueue_head(&nvmeq->sq_full);
init_waitqueue_entry(&nvmeq->sq_cong_wait, nvme_thread);
bio_list_init(&nvmeq->sq_cong);
- nvmeq->q_db = &dev->dbs[qid << (dev->db_stride + 1)];
+ nvmeq->q_db = &dev->dbs[qid * 2 * dev->db_stride];
nvmeq->q_depth = depth;
nvmeq->cq_vector = vector;
+ nvmeq->qid = qid;
nvmeq->q_suspended = 1;
dev->queue_count++;
@@ -1052,11 +1184,10 @@
{
if (use_threaded_interrupts)
return request_threaded_irq(dev->entry[nvmeq->cq_vector].vector,
- nvme_irq_check, nvme_irq,
- IRQF_DISABLED | IRQF_SHARED,
+ nvme_irq_check, nvme_irq, IRQF_SHARED,
name, nvmeq);
return request_irq(dev->entry[nvmeq->cq_vector].vector, nvme_irq,
- IRQF_DISABLED | IRQF_SHARED, name, nvmeq);
+ IRQF_SHARED, name, nvmeq);
}
static void nvme_init_queue(struct nvme_queue *nvmeq, u16 qid)
@@ -1067,7 +1198,7 @@
nvmeq->sq_tail = 0;
nvmeq->cq_head = 0;
nvmeq->cq_phase = 1;
- nvmeq->q_db = &dev->dbs[qid << (dev->db_stride + 1)];
+ nvmeq->q_db = &dev->dbs[qid * 2 * dev->db_stride];
memset(nvmeq->cmdid_data, 0, extra);
memset((void *)nvmeq->cqes, 0, CQ_SIZE(nvmeq->q_depth));
nvme_cancel_ios(nvmeq, false);
@@ -1087,13 +1218,13 @@
if (result < 0)
goto release_cq;
- result = queue_request_irq(dev, nvmeq, "nvme");
+ result = queue_request_irq(dev, nvmeq, nvmeq->irqname);
if (result < 0)
goto release_sq;
- spin_lock(&nvmeq->q_lock);
+ spin_lock_irq(&nvmeq->q_lock);
nvme_init_queue(nvmeq, qid);
- spin_unlock(&nvmeq->q_lock);
+ spin_unlock_irq(&nvmeq->q_lock);
return result;
@@ -1205,13 +1336,13 @@
if (result)
return result;
- result = queue_request_irq(dev, nvmeq, "nvme admin");
+ result = queue_request_irq(dev, nvmeq, nvmeq->irqname);
if (result)
return result;
- spin_lock(&nvmeq->q_lock);
+ spin_lock_irq(&nvmeq->q_lock);
nvme_init_queue(nvmeq, 0);
- spin_unlock(&nvmeq->q_lock);
+ spin_unlock_irq(&nvmeq->q_lock);
return result;
}
@@ -1487,10 +1618,47 @@
}
}
+#ifdef CONFIG_COMPAT
+static int nvme_compat_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ struct nvme_ns *ns = bdev->bd_disk->private_data;
+
+ switch (cmd) {
+ case SG_IO:
+ return nvme_sg_io32(ns, arg);
+ }
+ return nvme_ioctl(bdev, mode, cmd, arg);
+}
+#else
+#define nvme_compat_ioctl NULL
+#endif
+
+static int nvme_open(struct block_device *bdev, fmode_t mode)
+{
+ struct nvme_ns *ns = bdev->bd_disk->private_data;
+ struct nvme_dev *dev = ns->dev;
+
+ kref_get(&dev->kref);
+ return 0;
+}
+
+static void nvme_free_dev(struct kref *kref);
+
+static void nvme_release(struct gendisk *disk, fmode_t mode)
+{
+ struct nvme_ns *ns = disk->private_data;
+ struct nvme_dev *dev = ns->dev;
+
+ kref_put(&dev->kref, nvme_free_dev);
+}
+
static const struct block_device_operations nvme_fops = {
.owner = THIS_MODULE,
.ioctl = nvme_ioctl,
- .compat_ioctl = nvme_ioctl,
+ .compat_ioctl = nvme_compat_ioctl,
+ .open = nvme_open,
+ .release = nvme_release,
};
static void nvme_resubmit_bios(struct nvme_queue *nvmeq)
@@ -1514,13 +1682,25 @@
static int nvme_kthread(void *data)
{
- struct nvme_dev *dev;
+ struct nvme_dev *dev, *next;
while (!kthread_should_stop()) {
set_current_state(TASK_INTERRUPTIBLE);
spin_lock(&dev_list_lock);
- list_for_each_entry(dev, &dev_list, node) {
+ list_for_each_entry_safe(dev, next, &dev_list, node) {
int i;
+ if (readl(&dev->bar->csts) & NVME_CSTS_CFS &&
+ dev->initialized) {
+ if (work_busy(&dev->reset_work))
+ continue;
+ list_del_init(&dev->node);
+ dev_warn(&dev->pci_dev->dev,
+ "Failed status, reset controller\n");
+ PREPARE_WORK(&dev->reset_work,
+ nvme_reset_failed_dev);
+ queue_work(nvme_workq, &dev->reset_work);
+ continue;
+ }
for (i = 0; i < dev->queue_count; i++) {
struct nvme_queue *nvmeq = dev->queues[i];
if (!nvmeq)
@@ -1541,33 +1721,6 @@
return 0;
}
-static DEFINE_IDA(nvme_index_ida);
-
-static int nvme_get_ns_idx(void)
-{
- int index, error;
-
- do {
- if (!ida_pre_get(&nvme_index_ida, GFP_KERNEL))
- return -1;
-
- spin_lock(&dev_list_lock);
- error = ida_get_new(&nvme_index_ida, &index);
- spin_unlock(&dev_list_lock);
- } while (error == -EAGAIN);
-
- if (error)
- index = -1;
- return index;
-}
-
-static void nvme_put_ns_idx(int index)
-{
- spin_lock(&dev_list_lock);
- ida_remove(&nvme_index_ida, index);
- spin_unlock(&dev_list_lock);
-}
-
static void nvme_config_discard(struct nvme_ns *ns)
{
u32 logical_block_size = queue_logical_block_size(ns->queue);
@@ -1601,7 +1754,7 @@
ns->dev = dev;
ns->queue->queuedata = ns;
- disk = alloc_disk(NVME_MINORS);
+ disk = alloc_disk(0);
if (!disk)
goto out_free_queue;
ns->ns_id = nsid;
@@ -1614,12 +1767,12 @@
blk_queue_max_hw_sectors(ns->queue, dev->max_hw_sectors);
disk->major = nvme_major;
- disk->minors = NVME_MINORS;
- disk->first_minor = NVME_MINORS * nvme_get_ns_idx();
+ disk->first_minor = 0;
disk->fops = &nvme_fops;
disk->private_data = ns;
disk->queue = ns->queue;
disk->driverfs_dev = &dev->pci_dev->dev;
+ disk->flags = GENHD_FL_EXT_DEVT;
sprintf(disk->disk_name, "nvme%dn%d", dev->instance, nsid);
set_capacity(disk, le64_to_cpup(&id->nsze) << (ns->lba_shift - 9));
@@ -1635,15 +1788,6 @@
return NULL;
}
-static void nvme_ns_free(struct nvme_ns *ns)
-{
- int index = ns->disk->first_minor / NVME_MINORS;
- put_disk(ns->disk);
- nvme_put_ns_idx(index);
- blk_cleanup_queue(ns->queue);
- kfree(ns);
-}
-
static int set_queue_count(struct nvme_dev *dev, int count)
{
int status;
@@ -1659,11 +1803,12 @@
static size_t db_bar_size(struct nvme_dev *dev, unsigned nr_io_queues)
{
- return 4096 + ((nr_io_queues + 1) << (dev->db_stride + 3));
+ return 4096 + ((nr_io_queues + 1) * 8 * dev->db_stride);
}
static int nvme_setup_io_queues(struct nvme_dev *dev)
{
+ struct nvme_queue *adminq = dev->queues[0];
struct pci_dev *pdev = dev->pci_dev;
int result, cpu, i, vecs, nr_io_queues, size, q_depth;
@@ -1690,7 +1835,7 @@
}
/* Deregister the admin queue's interrupt */
- free_irq(dev->entry[0].vector, dev->queues[0]);
+ free_irq(dev->entry[0].vector, adminq);
vecs = nr_io_queues;
for (i = 0; i < vecs; i++)
@@ -1728,9 +1873,9 @@
*/
nr_io_queues = vecs;
- result = queue_request_irq(dev, dev->queues[0], "nvme admin");
+ result = queue_request_irq(dev, adminq, adminq->irqname);
if (result) {
- dev->queues[0]->q_suspended = 1;
+ adminq->q_suspended = 1;
goto free_queues;
}
@@ -1739,9 +1884,9 @@
for (i = dev->queue_count - 1; i > nr_io_queues; i--) {
struct nvme_queue *nvmeq = dev->queues[i];
- spin_lock(&nvmeq->q_lock);
+ spin_lock_irq(&nvmeq->q_lock);
nvme_cancel_ios(nvmeq, false);
- spin_unlock(&nvmeq->q_lock);
+ spin_unlock_irq(&nvmeq->q_lock);
nvme_free_queue(nvmeq);
dev->queue_count--;
@@ -1782,7 +1927,7 @@
return 0;
free_queues:
- nvme_free_queues(dev);
+ nvme_free_queues(dev, 1);
return result;
}
@@ -1794,6 +1939,7 @@
*/
static int nvme_dev_add(struct nvme_dev *dev)
{
+ struct pci_dev *pdev = dev->pci_dev;
int res;
unsigned nn, i;
struct nvme_ns *ns;
@@ -1803,8 +1949,7 @@
dma_addr_t dma_addr;
int shift = NVME_CAP_MPSMIN(readq(&dev->bar->cap)) + 12;
- mem = dma_alloc_coherent(&dev->pci_dev->dev, 8192, &dma_addr,
- GFP_KERNEL);
+ mem = dma_alloc_coherent(&pdev->dev, 8192, &dma_addr, GFP_KERNEL);
if (!mem)
return -ENOMEM;
@@ -1817,13 +1962,14 @@
ctrl = mem;
nn = le32_to_cpup(&ctrl->nn);
dev->oncs = le16_to_cpup(&ctrl->oncs);
+ dev->abort_limit = ctrl->acl + 1;
memcpy(dev->serial, ctrl->sn, sizeof(ctrl->sn));
memcpy(dev->model, ctrl->mn, sizeof(ctrl->mn));
memcpy(dev->firmware_rev, ctrl->fr, sizeof(ctrl->fr));
if (ctrl->mdts)
dev->max_hw_sectors = 1 << (ctrl->mdts + shift - 9);
- if ((dev->pci_dev->vendor == PCI_VENDOR_ID_INTEL) &&
- (dev->pci_dev->device == 0x0953) && ctrl->vs[3])
+ if ((pdev->vendor == PCI_VENDOR_ID_INTEL) &&
+ (pdev->device == 0x0953) && ctrl->vs[3])
dev->stripe_size = 1 << (ctrl->vs[3] + shift);
id_ns = mem;
@@ -1871,16 +2017,21 @@
dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
goto disable;
- pci_set_drvdata(pdev, dev);
dev->bar = ioremap(pci_resource_start(pdev, 0), 8192);
if (!dev->bar)
goto disable;
-
- dev->db_stride = NVME_CAP_STRIDE(readq(&dev->bar->cap));
+ if (readl(&dev->bar->csts) == -1) {
+ result = -ENODEV;
+ goto unmap;
+ }
+ dev->db_stride = 1 << NVME_CAP_STRIDE(readq(&dev->bar->cap));
dev->dbs = ((void __iomem *)dev->bar) + 4096;
return 0;
+ unmap:
+ iounmap(dev->bar);
+ dev->bar = NULL;
disable:
pci_release_regions(pdev);
disable_pci:
@@ -1898,37 +2049,183 @@
if (dev->bar) {
iounmap(dev->bar);
dev->bar = NULL;
+ pci_release_regions(dev->pci_dev);
}
- pci_release_regions(dev->pci_dev);
if (pci_is_enabled(dev->pci_dev))
pci_disable_device(dev->pci_dev);
}
+struct nvme_delq_ctx {
+ struct task_struct *waiter;
+ struct kthread_worker *worker;
+ atomic_t refcount;
+};
+
+static void nvme_wait_dq(struct nvme_delq_ctx *dq, struct nvme_dev *dev)
+{
+ dq->waiter = current;
+ mb();
+
+ for (;;) {
+ set_current_state(TASK_KILLABLE);
+ if (!atomic_read(&dq->refcount))
+ break;
+ if (!schedule_timeout(ADMIN_TIMEOUT) ||
+ fatal_signal_pending(current)) {
+ set_current_state(TASK_RUNNING);
+
+ nvme_disable_ctrl(dev, readq(&dev->bar->cap));
+ nvme_disable_queue(dev, 0);
+
+ send_sig(SIGKILL, dq->worker->task, 1);
+ flush_kthread_worker(dq->worker);
+ return;
+ }
+ }
+ set_current_state(TASK_RUNNING);
+}
+
+static void nvme_put_dq(struct nvme_delq_ctx *dq)
+{
+ atomic_dec(&dq->refcount);
+ if (dq->waiter)
+ wake_up_process(dq->waiter);
+}
+
+static struct nvme_delq_ctx *nvme_get_dq(struct nvme_delq_ctx *dq)
+{
+ atomic_inc(&dq->refcount);
+ return dq;
+}
+
+static void nvme_del_queue_end(struct nvme_queue *nvmeq)
+{
+ struct nvme_delq_ctx *dq = nvmeq->cmdinfo.ctx;
+
+ nvme_clear_queue(nvmeq);
+ nvme_put_dq(dq);
+}
+
+static int adapter_async_del_queue(struct nvme_queue *nvmeq, u8 opcode,
+ kthread_work_func_t fn)
+{
+ struct nvme_command c;
+
+ memset(&c, 0, sizeof(c));
+ c.delete_queue.opcode = opcode;
+ c.delete_queue.qid = cpu_to_le16(nvmeq->qid);
+
+ init_kthread_work(&nvmeq->cmdinfo.work, fn);
+ return nvme_submit_admin_cmd_async(nvmeq->dev, &c, &nvmeq->cmdinfo);
+}
+
+static void nvme_del_cq_work_handler(struct kthread_work *work)
+{
+ struct nvme_queue *nvmeq = container_of(work, struct nvme_queue,
+ cmdinfo.work);
+ nvme_del_queue_end(nvmeq);
+}
+
+static int nvme_delete_cq(struct nvme_queue *nvmeq)
+{
+ return adapter_async_del_queue(nvmeq, nvme_admin_delete_cq,
+ nvme_del_cq_work_handler);
+}
+
+static void nvme_del_sq_work_handler(struct kthread_work *work)
+{
+ struct nvme_queue *nvmeq = container_of(work, struct nvme_queue,
+ cmdinfo.work);
+ int status = nvmeq->cmdinfo.status;
+
+ if (!status)
+ status = nvme_delete_cq(nvmeq);
+ if (status)
+ nvme_del_queue_end(nvmeq);
+}
+
+static int nvme_delete_sq(struct nvme_queue *nvmeq)
+{
+ return adapter_async_del_queue(nvmeq, nvme_admin_delete_sq,
+ nvme_del_sq_work_handler);
+}
+
+static void nvme_del_queue_start(struct kthread_work *work)
+{
+ struct nvme_queue *nvmeq = container_of(work, struct nvme_queue,
+ cmdinfo.work);
+ allow_signal(SIGKILL);
+ if (nvme_delete_sq(nvmeq))
+ nvme_del_queue_end(nvmeq);
+}
+
+static void nvme_disable_io_queues(struct nvme_dev *dev)
+{
+ int i;
+ DEFINE_KTHREAD_WORKER_ONSTACK(worker);
+ struct nvme_delq_ctx dq;
+ struct task_struct *kworker_task = kthread_run(kthread_worker_fn,
+ &worker, "nvme%d", dev->instance);
+
+ if (IS_ERR(kworker_task)) {
+ dev_err(&dev->pci_dev->dev,
+ "Failed to create queue del task\n");
+ for (i = dev->queue_count - 1; i > 0; i--)
+ nvme_disable_queue(dev, i);
+ return;
+ }
+
+ dq.waiter = NULL;
+ atomic_set(&dq.refcount, 0);
+ dq.worker = &worker;
+ for (i = dev->queue_count - 1; i > 0; i--) {
+ struct nvme_queue *nvmeq = dev->queues[i];
+
+ if (nvme_suspend_queue(nvmeq))
+ continue;
+ nvmeq->cmdinfo.ctx = nvme_get_dq(&dq);
+ nvmeq->cmdinfo.worker = dq.worker;
+ init_kthread_work(&nvmeq->cmdinfo.work, nvme_del_queue_start);
+ queue_kthread_work(dq.worker, &nvmeq->cmdinfo.work);
+ }
+ nvme_wait_dq(&dq, dev);
+ kthread_stop(kworker_task);
+}
+
static void nvme_dev_shutdown(struct nvme_dev *dev)
{
int i;
- for (i = dev->queue_count - 1; i >= 0; i--)
- nvme_disable_queue(dev, i);
+ dev->initialized = 0;
spin_lock(&dev_list_lock);
list_del_init(&dev->node);
spin_unlock(&dev_list_lock);
- if (dev->bar)
+ if (!dev->bar || (dev->bar && readl(&dev->bar->csts) == -1)) {
+ for (i = dev->queue_count - 1; i >= 0; i--) {
+ struct nvme_queue *nvmeq = dev->queues[i];
+ nvme_suspend_queue(nvmeq);
+ nvme_clear_queue(nvmeq);
+ }
+ } else {
+ nvme_disable_io_queues(dev);
nvme_shutdown_ctrl(dev);
+ nvme_disable_queue(dev, 0);
+ }
nvme_dev_unmap(dev);
}
static void nvme_dev_remove(struct nvme_dev *dev)
{
- struct nvme_ns *ns, *next;
+ struct nvme_ns *ns;
- list_for_each_entry_safe(ns, next, &dev->namespaces, list) {
- list_del(&ns->list);
- del_gendisk(ns->disk);
- nvme_ns_free(ns);
+ list_for_each_entry(ns, &dev->namespaces, list) {
+ if (ns->disk->flags & GENHD_FL_UP)
+ del_gendisk(ns->disk);
+ if (!blk_queue_dying(ns->queue))
+ blk_cleanup_queue(ns->queue);
}
}
@@ -1985,14 +2282,22 @@
spin_unlock(&dev_list_lock);
}
+static void nvme_free_namespaces(struct nvme_dev *dev)
+{
+ struct nvme_ns *ns, *next;
+
+ list_for_each_entry_safe(ns, next, &dev->namespaces, list) {
+ list_del(&ns->list);
+ put_disk(ns->disk);
+ kfree(ns);
+ }
+}
+
static void nvme_free_dev(struct kref *kref)
{
struct nvme_dev *dev = container_of(kref, struct nvme_dev, kref);
- nvme_dev_remove(dev);
- nvme_dev_shutdown(dev);
- nvme_free_queues(dev);
- nvme_release_instance(dev);
- nvme_release_prp_pools(dev);
+
+ nvme_free_namespaces(dev);
kfree(dev->queues);
kfree(dev->entry);
kfree(dev);
@@ -2056,6 +2361,7 @@
return result;
disable:
+ nvme_disable_queue(dev, 0);
spin_lock(&dev_list_lock);
list_del_init(&dev->node);
spin_unlock(&dev_list_lock);
@@ -2064,6 +2370,71 @@
return result;
}
+static int nvme_remove_dead_ctrl(void *arg)
+{
+ struct nvme_dev *dev = (struct nvme_dev *)arg;
+ struct pci_dev *pdev = dev->pci_dev;
+
+ if (pci_get_drvdata(pdev))
+ pci_stop_and_remove_bus_device(pdev);
+ kref_put(&dev->kref, nvme_free_dev);
+ return 0;
+}
+
+static void nvme_remove_disks(struct work_struct *ws)
+{
+ int i;
+ struct nvme_dev *dev = container_of(ws, struct nvme_dev, reset_work);
+
+ nvme_dev_remove(dev);
+ spin_lock(&dev_list_lock);
+ for (i = dev->queue_count - 1; i > 0; i--) {
+ BUG_ON(!dev->queues[i] || !dev->queues[i]->q_suspended);
+ nvme_free_queue(dev->queues[i]);
+ dev->queue_count--;
+ dev->queues[i] = NULL;
+ }
+ spin_unlock(&dev_list_lock);
+}
+
+static int nvme_dev_resume(struct nvme_dev *dev)
+{
+ int ret;
+
+ ret = nvme_dev_start(dev);
+ if (ret && ret != -EBUSY)
+ return ret;
+ if (ret == -EBUSY) {
+ spin_lock(&dev_list_lock);
+ PREPARE_WORK(&dev->reset_work, nvme_remove_disks);
+ queue_work(nvme_workq, &dev->reset_work);
+ spin_unlock(&dev_list_lock);
+ }
+ dev->initialized = 1;
+ return 0;
+}
+
+static void nvme_dev_reset(struct nvme_dev *dev)
+{
+ nvme_dev_shutdown(dev);
+ if (nvme_dev_resume(dev)) {
+ dev_err(&dev->pci_dev->dev, "Device failed to resume\n");
+ kref_get(&dev->kref);
+ if (IS_ERR(kthread_run(nvme_remove_dead_ctrl, dev, "nvme%d",
+ dev->instance))) {
+ dev_err(&dev->pci_dev->dev,
+ "Failed to start controller remove task\n");
+ kref_put(&dev->kref, nvme_free_dev);
+ }
+ }
+}
+
+static void nvme_reset_failed_dev(struct work_struct *ws)
+{
+ struct nvme_dev *dev = container_of(ws, struct nvme_dev, reset_work);
+ nvme_dev_reset(dev);
+}
+
static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
int result = -ENOMEM;
@@ -2082,8 +2453,9 @@
goto free;
INIT_LIST_HEAD(&dev->namespaces);
+ INIT_WORK(&dev->reset_work, nvme_reset_failed_dev);
dev->pci_dev = pdev;
-
+ pci_set_drvdata(pdev, dev);
result = nvme_set_instance(dev);
if (result)
goto free;
@@ -2099,6 +2471,7 @@
goto release_pools;
}
+ kref_init(&dev->kref);
result = nvme_dev_add(dev);
if (result)
goto shutdown;
@@ -2113,15 +2486,16 @@
if (result)
goto remove;
- kref_init(&dev->kref);
+ dev->initialized = 1;
return 0;
remove:
nvme_dev_remove(dev);
+ nvme_free_namespaces(dev);
shutdown:
nvme_dev_shutdown(dev);
release_pools:
- nvme_free_queues(dev);
+ nvme_free_queues(dev, 0);
nvme_release_prp_pools(dev);
release:
nvme_release_instance(dev);
@@ -2132,10 +2506,28 @@
return result;
}
+static void nvme_shutdown(struct pci_dev *pdev)
+{
+ struct nvme_dev *dev = pci_get_drvdata(pdev);
+ nvme_dev_shutdown(dev);
+}
+
static void nvme_remove(struct pci_dev *pdev)
{
struct nvme_dev *dev = pci_get_drvdata(pdev);
+
+ spin_lock(&dev_list_lock);
+ list_del_init(&dev->node);
+ spin_unlock(&dev_list_lock);
+
+ pci_set_drvdata(pdev, NULL);
+ flush_work(&dev->reset_work);
misc_deregister(&dev->miscdev);
+ nvme_dev_remove(dev);
+ nvme_dev_shutdown(dev);
+ nvme_free_queues(dev, 0);
+ nvme_release_instance(dev);
+ nvme_release_prp_pools(dev);
kref_put(&dev->kref, nvme_free_dev);
}
@@ -2159,13 +2551,12 @@
{
struct pci_dev *pdev = to_pci_dev(dev);
struct nvme_dev *ndev = pci_get_drvdata(pdev);
- int ret;
- ret = nvme_dev_start(ndev);
- /* XXX: should remove gendisks if resume fails */
- if (ret)
- nvme_free_queues(ndev);
- return ret;
+ if (nvme_dev_resume(ndev) && !work_busy(&ndev->reset_work)) {
+ PREPARE_WORK(&ndev->reset_work, nvme_reset_failed_dev);
+ queue_work(nvme_workq, &ndev->reset_work);
+ }
+ return 0;
}
static SIMPLE_DEV_PM_OPS(nvme_dev_pm_ops, nvme_suspend, nvme_resume);
@@ -2192,6 +2583,7 @@
.id_table = nvme_id_table,
.probe = nvme_probe,
.remove = nvme_remove,
+ .shutdown = nvme_shutdown,
.driver = {
.pm = &nvme_dev_pm_ops,
},
@@ -2206,9 +2598,14 @@
if (IS_ERR(nvme_thread))
return PTR_ERR(nvme_thread);
+ result = -ENOMEM;
+ nvme_workq = create_singlethread_workqueue("nvme");
+ if (!nvme_workq)
+ goto kill_kthread;
+
result = register_blkdev(nvme_major, "nvme");
if (result < 0)
- goto kill_kthread;
+ goto kill_workq;
else if (result > 0)
nvme_major = result;
@@ -2219,6 +2616,8 @@
unregister_blkdev:
unregister_blkdev(nvme_major, "nvme");
+ kill_workq:
+ destroy_workqueue(nvme_workq);
kill_kthread:
kthread_stop(nvme_thread);
return result;
@@ -2228,6 +2627,7 @@
{
pci_unregister_driver(&nvme_driver);
unregister_blkdev(nvme_major, "nvme");
+ destroy_workqueue(nvme_workq);
kthread_stop(nvme_thread);
}
diff --git a/drivers/block/nvme-scsi.c b/drivers/block/nvme-scsi.c
index 4a4ff4e..4a0ceb6 100644
--- a/drivers/block/nvme-scsi.c
+++ b/drivers/block/nvme-scsi.c
@@ -25,6 +25,7 @@
#include <linux/bio.h>
#include <linux/bitops.h>
#include <linux/blkdev.h>
+#include <linux/compat.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
@@ -3038,6 +3039,152 @@
return retcode;
}
+#ifdef CONFIG_COMPAT
+typedef struct sg_io_hdr32 {
+ compat_int_t interface_id; /* [i] 'S' for SCSI generic (required) */
+ compat_int_t dxfer_direction; /* [i] data transfer direction */
+ unsigned char cmd_len; /* [i] SCSI command length ( <= 16 bytes) */
+ unsigned char mx_sb_len; /* [i] max length to write to sbp */
+ unsigned short iovec_count; /* [i] 0 implies no scatter gather */
+ compat_uint_t dxfer_len; /* [i] byte count of data transfer */
+ compat_uint_t dxferp; /* [i], [*io] points to data transfer memory
+ or scatter gather list */
+ compat_uptr_t cmdp; /* [i], [*i] points to command to perform */
+ compat_uptr_t sbp; /* [i], [*o] points to sense_buffer memory */
+ compat_uint_t timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */
+ compat_uint_t flags; /* [i] 0 -> default, see SG_FLAG... */
+ compat_int_t pack_id; /* [i->o] unused internally (normally) */
+ compat_uptr_t usr_ptr; /* [i->o] unused internally */
+ unsigned char status; /* [o] scsi status */
+ unsigned char masked_status; /* [o] shifted, masked scsi status */
+ unsigned char msg_status; /* [o] messaging level data (optional) */
+ unsigned char sb_len_wr; /* [o] byte count actually written to sbp */
+ unsigned short host_status; /* [o] errors from host adapter */
+ unsigned short driver_status; /* [o] errors from software driver */
+ compat_int_t resid; /* [o] dxfer_len - actual_transferred */
+ compat_uint_t duration; /* [o] time taken by cmd (unit: millisec) */
+ compat_uint_t info; /* [o] auxiliary information */
+} sg_io_hdr32_t; /* 64 bytes long (on sparc32) */
+
+typedef struct sg_iovec32 {
+ compat_uint_t iov_base;
+ compat_uint_t iov_len;
+} sg_iovec32_t;
+
+static int sg_build_iovec(sg_io_hdr_t __user *sgio, void __user *dxferp, u16 iovec_count)
+{
+ sg_iovec_t __user *iov = (sg_iovec_t __user *) (sgio + 1);
+ sg_iovec32_t __user *iov32 = dxferp;
+ int i;
+
+ for (i = 0; i < iovec_count; i++) {
+ u32 base, len;
+
+ if (get_user(base, &iov32[i].iov_base) ||
+ get_user(len, &iov32[i].iov_len) ||
+ put_user(compat_ptr(base), &iov[i].iov_base) ||
+ put_user(len, &iov[i].iov_len))
+ return -EFAULT;
+ }
+
+ if (put_user(iov, &sgio->dxferp))
+ return -EFAULT;
+ return 0;
+}
+
+int nvme_sg_io32(struct nvme_ns *ns, unsigned long arg)
+{
+ sg_io_hdr32_t __user *sgio32 = (sg_io_hdr32_t __user *)arg;
+ sg_io_hdr_t __user *sgio;
+ u16 iovec_count;
+ u32 data;
+ void __user *dxferp;
+ int err;
+ int interface_id;
+
+ if (get_user(interface_id, &sgio32->interface_id))
+ return -EFAULT;
+ if (interface_id != 'S')
+ return -EINVAL;
+
+ if (get_user(iovec_count, &sgio32->iovec_count))
+ return -EFAULT;
+
+ {
+ void __user *top = compat_alloc_user_space(0);
+ void __user *new = compat_alloc_user_space(sizeof(sg_io_hdr_t) +
+ (iovec_count * sizeof(sg_iovec_t)));
+ if (new > top)
+ return -EINVAL;
+
+ sgio = new;
+ }
+
+ /* Ok, now construct. */
+ if (copy_in_user(&sgio->interface_id, &sgio32->interface_id,
+ (2 * sizeof(int)) +
+ (2 * sizeof(unsigned char)) +
+ (1 * sizeof(unsigned short)) +
+ (1 * sizeof(unsigned int))))
+ return -EFAULT;
+
+ if (get_user(data, &sgio32->dxferp))
+ return -EFAULT;
+ dxferp = compat_ptr(data);
+ if (iovec_count) {
+ if (sg_build_iovec(sgio, dxferp, iovec_count))
+ return -EFAULT;
+ } else {
+ if (put_user(dxferp, &sgio->dxferp))
+ return -EFAULT;
+ }
+
+ {
+ unsigned char __user *cmdp;
+ unsigned char __user *sbp;
+
+ if (get_user(data, &sgio32->cmdp))
+ return -EFAULT;
+ cmdp = compat_ptr(data);
+
+ if (get_user(data, &sgio32->sbp))
+ return -EFAULT;
+ sbp = compat_ptr(data);
+
+ if (put_user(cmdp, &sgio->cmdp) ||
+ put_user(sbp, &sgio->sbp))
+ return -EFAULT;
+ }
+
+ if (copy_in_user(&sgio->timeout, &sgio32->timeout,
+ 3 * sizeof(int)))
+ return -EFAULT;
+
+ if (get_user(data, &sgio32->usr_ptr))
+ return -EFAULT;
+ if (put_user(compat_ptr(data), &sgio->usr_ptr))
+ return -EFAULT;
+
+ err = nvme_sg_io(ns, sgio);
+ if (err >= 0) {
+ void __user *datap;
+
+ if (copy_in_user(&sgio32->pack_id, &sgio->pack_id,
+ sizeof(int)) ||
+ get_user(datap, &sgio->usr_ptr) ||
+ put_user((u32)(unsigned long)datap,
+ &sgio32->usr_ptr) ||
+ copy_in_user(&sgio32->status, &sgio->status,
+ (4 * sizeof(unsigned char)) +
+ (2 * sizeof(unsigned short)) +
+ (3 * sizeof(int))))
+ err = -EFAULT;
+ }
+
+ return err;
+}
+#endif
+
int nvme_sg_get_version_num(int __user *ip)
{
return put_user(sg_version_num, ip);
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 6a680d4..b1cb3f4 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -110,9 +110,9 @@
return virtqueue_add_sgs(vq, sgs, num_out, num_in, vbr, GFP_ATOMIC);
}
-static inline void virtblk_request_done(struct virtblk_req *vbr)
+static inline void virtblk_request_done(struct request *req)
{
- struct request *req = vbr->req;
+ struct virtblk_req *vbr = req->special;
int error = virtblk_result(vbr);
if (req->cmd_type == REQ_TYPE_BLOCK_PC) {
@@ -138,7 +138,7 @@
do {
virtqueue_disable_cb(vq);
while ((vbr = virtqueue_get_buf(vblk->vq, &len)) != NULL) {
- virtblk_request_done(vbr);
+ blk_mq_complete_request(vbr->req);
req_done = true;
}
if (unlikely(virtqueue_is_broken(vq)))
@@ -479,6 +479,7 @@
.map_queue = blk_mq_map_queue,
.alloc_hctx = blk_mq_alloc_single_hw_queue,
.free_hctx = blk_mq_free_single_hw_queue,
+ .complete = virtblk_request_done,
};
static struct blk_mq_reg virtio_mq_reg = {
diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index da18046..64c60ed 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -285,7 +285,8 @@
if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST ||
!rb_next(&persistent_gnt->node)) {
- ret = gnttab_unmap_refs(unmap, pages, segs_to_unmap);
+ ret = gnttab_unmap_refs(unmap, NULL, pages,
+ segs_to_unmap);
BUG_ON(ret);
put_free_pages(blkif, pages, segs_to_unmap);
segs_to_unmap = 0;
@@ -298,7 +299,7 @@
BUG_ON(num != 0);
}
-static void unmap_purged_grants(struct work_struct *work)
+void xen_blkbk_unmap_purged_grants(struct work_struct *work)
{
struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST];
struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST];
@@ -320,7 +321,8 @@
pages[segs_to_unmap] = persistent_gnt->page;
if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
- ret = gnttab_unmap_refs(unmap, pages, segs_to_unmap);
+ ret = gnttab_unmap_refs(unmap, NULL, pages,
+ segs_to_unmap);
BUG_ON(ret);
put_free_pages(blkif, pages, segs_to_unmap);
segs_to_unmap = 0;
@@ -328,7 +330,7 @@
kfree(persistent_gnt);
}
if (segs_to_unmap > 0) {
- ret = gnttab_unmap_refs(unmap, pages, segs_to_unmap);
+ ret = gnttab_unmap_refs(unmap, NULL, pages, segs_to_unmap);
BUG_ON(ret);
put_free_pages(blkif, pages, segs_to_unmap);
}
@@ -373,7 +375,7 @@
pr_debug(DRV_PFX "Going to purge %u persistent grants\n", num_clean);
- INIT_LIST_HEAD(&blkif->persistent_purge_list);
+ BUG_ON(!list_empty(&blkif->persistent_purge_list));
root = &blkif->persistent_gnts;
purge_list:
foreach_grant_safe(persistent_gnt, n, root, node) {
@@ -418,7 +420,6 @@
blkif->vbd.overflow_max_grants = 0;
/* We can defer this work */
- INIT_WORK(&blkif->persistent_purge_work, unmap_purged_grants);
schedule_work(&blkif->persistent_purge_work);
pr_debug(DRV_PFX "Purged %u/%u\n", (total - num_clean), total);
return;
@@ -623,16 +624,8 @@
print_stats(blkif);
}
- /* Since we are shutting down remove all pages from the buffer */
- shrink_free_pagepool(blkif, 0 /* All */);
-
- /* Free all persistent grant pages */
- if (!RB_EMPTY_ROOT(&blkif->persistent_gnts))
- free_persistent_gnts(blkif, &blkif->persistent_gnts,
- blkif->persistent_gnt_c);
-
- BUG_ON(!RB_EMPTY_ROOT(&blkif->persistent_gnts));
- blkif->persistent_gnt_c = 0;
+ /* Drain pending purge work */
+ flush_work(&blkif->persistent_purge_work);
if (log_stats)
print_stats(blkif);
@@ -644,6 +637,23 @@
}
/*
+ * Remove persistent grants and empty the pool of free pages
+ */
+void xen_blkbk_free_caches(struct xen_blkif *blkif)
+{
+ /* Free all persistent grant pages */
+ if (!RB_EMPTY_ROOT(&blkif->persistent_gnts))
+ free_persistent_gnts(blkif, &blkif->persistent_gnts,
+ blkif->persistent_gnt_c);
+
+ BUG_ON(!RB_EMPTY_ROOT(&blkif->persistent_gnts));
+ blkif->persistent_gnt_c = 0;
+
+ /* Since we are shutting down remove all pages from the buffer */
+ shrink_free_pagepool(blkif, 0 /* All */);
+}
+
+/*
* Unmap the grant references, and also remove the M2P over-rides
* used in the 'pending_req'.
*/
@@ -668,14 +678,15 @@
GNTMAP_host_map, pages[i]->handle);
pages[i]->handle = BLKBACK_INVALID_HANDLE;
if (++invcount == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
- ret = gnttab_unmap_refs(unmap, unmap_pages, invcount);
+ ret = gnttab_unmap_refs(unmap, NULL, unmap_pages,
+ invcount);
BUG_ON(ret);
put_free_pages(blkif, unmap_pages, invcount);
invcount = 0;
}
}
if (invcount) {
- ret = gnttab_unmap_refs(unmap, unmap_pages, invcount);
+ ret = gnttab_unmap_refs(unmap, NULL, unmap_pages, invcount);
BUG_ON(ret);
put_free_pages(blkif, unmap_pages, invcount);
}
@@ -737,7 +748,7 @@
}
if (segs_to_map) {
- ret = gnttab_map_refs(map, pages_to_gnt, segs_to_map);
+ ret = gnttab_map_refs(map, NULL, pages_to_gnt, segs_to_map);
BUG_ON(ret);
}
@@ -835,7 +846,7 @@
struct grant_page **pages = pending_req->indirect_pages;
struct xen_blkif *blkif = pending_req->blkif;
int indirect_grefs, rc, n, nseg, i;
- struct blkif_request_segment_aligned *segments = NULL;
+ struct blkif_request_segment *segments = NULL;
nseg = pending_req->nr_pages;
indirect_grefs = INDIRECT_PAGES(nseg);
@@ -931,9 +942,7 @@
{
atomic_set(&blkif->drain, 1);
do {
- /* The initial value is one, and one refcnt taken at the
- * start of the xen_blkif_schedule thread. */
- if (atomic_read(&blkif->refcnt) <= 2)
+ if (atomic_read(&blkif->inflight) == 0)
break;
wait_for_completion_interruptible_timeout(
&blkif->drain_complete, HZ);
@@ -973,17 +982,30 @@
* the proper response on the ring.
*/
if (atomic_dec_and_test(&pending_req->pendcnt)) {
- xen_blkbk_unmap(pending_req->blkif,
+ struct xen_blkif *blkif = pending_req->blkif;
+
+ xen_blkbk_unmap(blkif,
pending_req->segments,
pending_req->nr_pages);
- make_response(pending_req->blkif, pending_req->id,
+ make_response(blkif, pending_req->id,
pending_req->operation, pending_req->status);
- xen_blkif_put(pending_req->blkif);
- if (atomic_read(&pending_req->blkif->refcnt) <= 2) {
- if (atomic_read(&pending_req->blkif->drain))
- complete(&pending_req->blkif->drain_complete);
+ free_req(blkif, pending_req);
+ /*
+ * Make sure the request is freed before releasing blkif,
+ * or there could be a race between free_req and the
+ * cleanup done in xen_blkif_free during shutdown.
+ *
+ * NB: The fact that we might try to wake up pending_free_wq
+ * before drain_complete (in case there's a drain going on)
+ * it's not a problem with our current implementation
+ * because we can assure there's no thread waiting on
+ * pending_free_wq if there's a drain going on, but it has
+ * to be taken into account if the current model is changed.
+ */
+ if (atomic_dec_and_test(&blkif->inflight) && atomic_read(&blkif->drain)) {
+ complete(&blkif->drain_complete);
}
- free_req(pending_req->blkif, pending_req);
+ xen_blkif_put(blkif);
}
}
@@ -1237,6 +1259,7 @@
* below (in "!bio") if we are handling a BLKIF_OP_DISCARD.
*/
xen_blkif_get(blkif);
+ atomic_inc(&blkif->inflight);
for (i = 0; i < nseg; i++) {
while ((bio == NULL) ||
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 8d88075..be05277 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -57,7 +57,7 @@
#define MAX_INDIRECT_SEGMENTS 256
#define SEGS_PER_INDIRECT_FRAME \
- (PAGE_SIZE/sizeof(struct blkif_request_segment_aligned))
+ (PAGE_SIZE/sizeof(struct blkif_request_segment))
#define MAX_INDIRECT_PAGES \
((MAX_INDIRECT_SEGMENTS + SEGS_PER_INDIRECT_FRAME - 1)/SEGS_PER_INDIRECT_FRAME)
#define INDIRECT_PAGES(_segs) \
@@ -278,6 +278,7 @@
/* for barrier (drain) requests */
struct completion drain_complete;
atomic_t drain;
+ atomic_t inflight;
/* One thread per one blkif. */
struct task_struct *xenblkd;
unsigned int waiting_reqs;
@@ -376,6 +377,7 @@
irqreturn_t xen_blkif_be_int(int irq, void *dev_id);
int xen_blkif_schedule(void *arg);
int xen_blkif_purge_persistent(void *arg);
+void xen_blkbk_free_caches(struct xen_blkif *blkif);
int xen_blkbk_flush_diskcache(struct xenbus_transaction xbt,
struct backend_info *be, int state);
@@ -383,6 +385,7 @@
int xen_blkbk_barrier(struct xenbus_transaction xbt,
struct backend_info *be, int state);
struct xenbus_device *xen_blkbk_xenbus(struct backend_info *be);
+void xen_blkbk_unmap_purged_grants(struct work_struct *work);
static inline void blkif_get_x86_32_req(struct blkif_request *dst,
struct blkif_x86_32_request *src)
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index c2014a0..9a547e6 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -125,8 +125,11 @@
blkif->persistent_gnts.rb_node = NULL;
spin_lock_init(&blkif->free_pages_lock);
INIT_LIST_HEAD(&blkif->free_pages);
+ INIT_LIST_HEAD(&blkif->persistent_purge_list);
blkif->free_pages_num = 0;
atomic_set(&blkif->persistent_gnt_in_use, 0);
+ atomic_set(&blkif->inflight, 0);
+ INIT_WORK(&blkif->persistent_purge_work, xen_blkbk_unmap_purged_grants);
INIT_LIST_HEAD(&blkif->pending_free);
@@ -259,6 +262,17 @@
if (!atomic_dec_and_test(&blkif->refcnt))
BUG();
+ /* Remove all persistent grants and the cache of ballooned pages. */
+ xen_blkbk_free_caches(blkif);
+
+ /* Make sure everything is drained before shutting down */
+ BUG_ON(blkif->persistent_gnt_c != 0);
+ BUG_ON(atomic_read(&blkif->persistent_gnt_in_use) != 0);
+ BUG_ON(blkif->free_pages_num != 0);
+ BUG_ON(!list_empty(&blkif->persistent_purge_list));
+ BUG_ON(!list_empty(&blkif->free_pages));
+ BUG_ON(!RB_EMPTY_ROOT(&blkif->persistent_gnts));
+
/* Check that there is no request in use */
list_for_each_entry_safe(req, n, &blkif->pending_free, free_list) {
list_del(&req->free_list);
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 8dcfb54..efe1b47 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -162,7 +162,7 @@
#define DEV_NAME "xvd" /* name in /dev */
#define SEGS_PER_INDIRECT_FRAME \
- (PAGE_SIZE/sizeof(struct blkif_request_segment_aligned))
+ (PAGE_SIZE/sizeof(struct blkif_request_segment))
#define INDIRECT_GREFS(_segs) \
((_segs + SEGS_PER_INDIRECT_FRAME - 1)/SEGS_PER_INDIRECT_FRAME)
@@ -393,7 +393,7 @@
unsigned long id;
unsigned int fsect, lsect;
int i, ref, n;
- struct blkif_request_segment_aligned *segments = NULL;
+ struct blkif_request_segment *segments = NULL;
/*
* Used to store if we are able to queue the request by just using
@@ -550,7 +550,7 @@
} else {
n = i % SEGS_PER_INDIRECT_FRAME;
segments[n] =
- (struct blkif_request_segment_aligned) {
+ (struct blkif_request_segment) {
.gref = ref,
.first_sect = fsect,
.last_sect = lsect };
@@ -1904,13 +1904,16 @@
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateConnected:
blkfront_connect(info);
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's Closing state -- fallthrough */
case XenbusStateClosing:
blkfront_closing(info);
break;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index fa3243d..1386749 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -499,6 +499,7 @@
config MAX_RAW_DEVS
int "Maximum number of RAW devices to support (1-65536)"
depends on RAW_DRIVER
+ range 1 65536
default "256"
help
The maximum number of RAW devices that are supported.
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index f3223aa..6e8d65e 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -190,7 +190,7 @@
struct raw_device_data *rawdev;
struct block_device *bdev;
- if (number <= 0 || number >= MAX_RAW_MINORS)
+ if (number <= 0 || number >= max_raw_minors)
return -EINVAL;
rawdev = &raw_devices[number];
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index feea87c..6928d09 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -890,12 +890,10 @@
} else {
/* Failback to copying a page */
struct page *page = alloc_page(GFP_KERNEL);
- char *src = buf->ops->map(pipe, buf, 1);
- char *dst;
+ char *src;
if (!page)
return -ENOMEM;
- dst = kmap(page);
offset = sd->pos & ~PAGE_MASK;
@@ -903,9 +901,8 @@
if (len + offset > PAGE_SIZE)
len = PAGE_SIZE - offset;
- memcpy(dst + offset, src + buf->offset, len);
-
- kunmap(page);
+ src = buf->ops->map(pipe, buf, 1);
+ memcpy(page_address(page) + offset, src + buf->offset, len);
buf->ops->unmap(pipe, buf, src);
sg_set_page(&(sgl->sg[sgl->n]), page, len, offset);
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cd6950f..6510ec4 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -140,3 +140,6 @@
bool
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+
+config CLKSRC_QCOM
+ bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index c7ca50a..2e0c0cc 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -32,6 +32,7 @@
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
+obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 974b2db..0595dc6 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -99,31 +99,6 @@
return;
}
-static void __init kona_timers_init(struct device_node *node)
-{
- u32 freq;
- struct clk *external_clk;
-
- external_clk = of_clk_get_by_name(node, NULL);
-
- if (!IS_ERR(external_clk)) {
- arch_timer_rate = clk_get_rate(external_clk);
- clk_prepare_enable(external_clk);
- } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
- arch_timer_rate = freq;
- } else {
- panic("unable to determine clock-frequency");
- }
-
- /* Setup IRQ numbers */
- timers.tmr_irq = irq_of_parse_and_map(node, 0);
-
- /* Setup IO addresses */
- timers.tmr_regs = of_iomap(node, 0);
-
- kona_timer_disable_and_clear(timers.tmr_regs);
-}
-
static int kona_timer_set_next_event(unsigned long clc,
struct clock_event_device *unused)
{
@@ -198,7 +173,34 @@
static void __init kona_timer_init(struct device_node *node)
{
- kona_timers_init(node);
+ u32 freq;
+ struct clk *external_clk;
+
+ if (!of_device_is_available(node)) {
+ pr_info("Kona Timer v1 marked as disabled in device tree\n");
+ return;
+ }
+
+ external_clk = of_clk_get_by_name(node, NULL);
+
+ if (!IS_ERR(external_clk)) {
+ arch_timer_rate = clk_get_rate(external_clk);
+ clk_prepare_enable(external_clk);
+ } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
+ arch_timer_rate = freq;
+ } else {
+ pr_err("Kona Timer v1 unable to determine clock-frequency");
+ return;
+ }
+
+ /* Setup IRQ numbers */
+ timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+ /* Setup IO addresses */
+ timers.tmr_regs = of_iomap(node, 0);
+
+ kona_timer_disable_and_clear(timers.tmr_regs);
+
kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq);
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
diff --git a/arch/arm/mach-msm/timer.c b/drivers/clocksource/qcom-timer.c
similarity index 97%
rename from arch/arm/mach-msm/timer.c
rename to drivers/clocksource/qcom-timer.c
index fd16449..e807acf 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/drivers/clocksource/qcom-timer.c
@@ -1,7 +1,7 @@
/*
*
* Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2009-2012,2014, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -26,10 +26,6 @@
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-
#define TIMER_MATCH_VAL 0x0000
#define TIMER_COUNT_VAL 0x0004
#define TIMER_ENABLE 0x0008
@@ -110,15 +106,6 @@
return readl_relaxed(source_base + TIMER_COUNT_VAL);
}
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
- /*
- * Shift timer count down by a constant due to unreliable lower bits
- * on some targets.
- */
- return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
static struct clocksource msm_clocksource = {
.name = "dg_timer",
.rating = 300,
@@ -232,7 +219,7 @@
sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
}
-#ifdef CONFIG_OF
+#ifdef CONFIG_ARCH_QCOM
static void __init msm_dt_timer_init(struct device_node *np)
{
u32 freq;
@@ -285,7 +272,7 @@
}
CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
-#endif
+#else
static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
u32 sts)
@@ -305,6 +292,15 @@
return 0;
}
+static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
+{
+ /*
+ * Shift timer count down by a constant due to unreliable lower bits
+ * on some targets.
+ */
+ return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
+}
+
void __init msm7x01_timer_init(void)
{
struct clocksource *cs = &msm_clocksource;
@@ -331,3 +327,4 @@
return;
msm_timer_init(19200000 / 4, 32, 7, false);
}
+#endif
diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
index 09a17d9..b52e1c0 100644
--- a/drivers/clocksource/timer-marco.c
+++ b/drivers/clocksource/timer-marco.c
@@ -19,7 +19,8 @@
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/sched_clock.h>
-#include <asm/mach/time.h>
+
+#define MARCO_CLOCK_FREQ 1000000
#define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000
#define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004
@@ -191,7 +192,7 @@
ce->rating = 200;
ce->set_mode = sirfsoc_timer_set_mode;
ce->set_next_event = sirfsoc_timer_set_next_event;
- clockevents_calc_mult_shift(ce, CLOCK_TICK_RATE, 60);
+ clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60);
ce->max_delta_ns = clockevent_delta2ns(-2, ce);
ce->min_delta_ns = clockevent_delta2ns(2, ce);
ce->cpumask = cpumask_of(cpu);
@@ -263,11 +264,11 @@
BUG_ON(IS_ERR(clk));
rate = clk_get_rate(clk);
- BUG_ON(rate < CLOCK_TICK_RATE);
- BUG_ON(rate % CLOCK_TICK_RATE);
+ BUG_ON(rate < MARCO_CLOCK_FREQ);
+ BUG_ON(rate % MARCO_CLOCK_FREQ);
/* Initialize the timer dividers */
- timer_div = rate / CLOCK_TICK_RATE - 1;
+ timer_div = rate / MARCO_CLOCK_FREQ - 1;
writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
@@ -283,7 +284,7 @@
/* Clear all interrupts */
writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
- BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+ BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ));
sirfsoc_clockevent_init();
}
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index 8a492d3..1a6b2d6 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -21,6 +21,8 @@
#include <linux/sched_clock.h>
#include <asm/mach/time.h>
+#define PRIMA2_CLOCK_FREQ 1000000
+
#define SIRFSOC_TIMER_COUNTER_LO 0x0000
#define SIRFSOC_TIMER_COUNTER_HI 0x0004
#define SIRFSOC_TIMER_MATCH_0 0x0008
@@ -173,7 +175,7 @@
static void __init sirfsoc_clockevent_init(void)
{
sirfsoc_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE,
+ clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ,
2, -2);
}
@@ -190,8 +192,8 @@
rate = clk_get_rate(clk);
- BUG_ON(rate < CLOCK_TICK_RATE);
- BUG_ON(rate % CLOCK_TICK_RATE);
+ BUG_ON(rate < PRIMA2_CLOCK_FREQ);
+ BUG_ON(rate % PRIMA2_CLOCK_FREQ);
sirfsoc_timer_base = of_iomap(np, 0);
if (!sirfsoc_timer_base)
@@ -199,14 +201,16 @@
sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
- writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
+ writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1,
+ sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
- BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+ BUG_ON(clocksource_register_hz(&sirfsoc_clocksource,
+ PRIMA2_CLOCK_FREQ));
- sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
+ sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 7e257b2..c788abf 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -51,12 +51,11 @@
return div_s64((int64_t)x << FRAC_BITS, (int64_t)y);
}
-static u64 energy_divisor;
-
struct sample {
int32_t core_pct_busy;
u64 aperf;
u64 mperf;
+ unsigned long long tsc;
int freq;
};
@@ -96,6 +95,7 @@
u64 prev_aperf;
u64 prev_mperf;
+ unsigned long long prev_tsc;
int sample_ptr;
struct sample samples[SAMPLE_COUNT];
};
@@ -548,30 +548,41 @@
struct sample *sample)
{
u64 core_pct;
- core_pct = div64_u64(int_tofp(sample->aperf * 100),
- sample->mperf);
- sample->freq = fp_toint(cpu->pstate.max_pstate * core_pct * 1000);
+ u64 c0_pct;
- sample->core_pct_busy = core_pct;
+ core_pct = div64_u64(sample->aperf * 100, sample->mperf);
+
+ c0_pct = div64_u64(sample->mperf * 100, sample->tsc);
+ sample->freq = fp_toint(
+ mul_fp(int_tofp(cpu->pstate.max_pstate),
+ int_tofp(core_pct * 1000)));
+
+ sample->core_pct_busy = mul_fp(int_tofp(core_pct),
+ div_fp(int_tofp(c0_pct + 1), int_tofp(100)));
}
static inline void intel_pstate_sample(struct cpudata *cpu)
{
u64 aperf, mperf;
+ unsigned long long tsc;
rdmsrl(MSR_IA32_APERF, aperf);
rdmsrl(MSR_IA32_MPERF, mperf);
+ tsc = native_read_tsc();
cpu->sample_ptr = (cpu->sample_ptr + 1) % SAMPLE_COUNT;
cpu->samples[cpu->sample_ptr].aperf = aperf;
cpu->samples[cpu->sample_ptr].mperf = mperf;
+ cpu->samples[cpu->sample_ptr].tsc = tsc;
cpu->samples[cpu->sample_ptr].aperf -= cpu->prev_aperf;
cpu->samples[cpu->sample_ptr].mperf -= cpu->prev_mperf;
+ cpu->samples[cpu->sample_ptr].tsc -= cpu->prev_tsc;
intel_pstate_calc_busy(cpu, &cpu->samples[cpu->sample_ptr]);
cpu->prev_aperf = aperf;
cpu->prev_mperf = mperf;
+ cpu->prev_tsc = tsc;
}
static inline void intel_pstate_set_sample_time(struct cpudata *cpu)
@@ -617,12 +628,10 @@
{
struct cpudata *cpu = (struct cpudata *) __data;
struct sample *sample;
- u64 energy;
intel_pstate_sample(cpu);
sample = &cpu->samples[cpu->sample_ptr];
- rdmsrl(MSR_PKG_ENERGY_STATUS, energy);
intel_pstate_adjust_busy_pstate(cpu);
@@ -631,7 +640,6 @@
cpu->pstate.current_pstate,
sample->mperf,
sample->aperf,
- div64_u64(energy, energy_divisor),
sample->freq);
intel_pstate_set_sample_time(cpu);
@@ -913,7 +921,6 @@
int cpu, rc = 0;
const struct x86_cpu_id *id;
struct cpu_defaults *cpu_info;
- u64 units;
if (no_load)
return -ENODEV;
@@ -947,9 +954,6 @@
if (rc)
goto out;
- rdmsrl(MSR_RAPL_POWER_UNIT, units);
- energy_divisor = 1 << ((units >> 8) & 0x1f); /* bits{12:8} */
-
intel_pstate_debug_expose_params();
intel_pstate_sysfs_expose_params();
diff --git a/drivers/crypto/nx/nx-842.c b/drivers/crypto/nx/nx-842.c
index 6c4c000..1e5481d 100644
--- a/drivers/crypto/nx/nx-842.c
+++ b/drivers/crypto/nx/nx-842.c
@@ -158,6 +158,15 @@
return sl->entry_nr * sizeof(struct nx842_slentry);
}
+static inline unsigned long nx842_get_pa(void *addr)
+{
+ if (is_vmalloc_addr(addr))
+ return page_to_phys(vmalloc_to_page(addr))
+ + offset_in_page(addr);
+ else
+ return __pa(addr);
+}
+
static int nx842_build_scatterlist(unsigned long buf, int len,
struct nx842_scatterlist *sl)
{
@@ -168,7 +177,7 @@
entry = sl->entries;
while (len) {
- entry->ptr = __pa(buf);
+ entry->ptr = nx842_get_pa((void *)buf);
nextpage = ALIGN(buf + 1, NX842_HW_PAGE_SIZE);
if (nextpage < buf + len) {
/* we aren't at the end yet */
@@ -370,8 +379,8 @@
op.flags = NX842_OP_COMPRESS;
csbcpb = &workmem->csbcpb;
memset(csbcpb, 0, sizeof(*csbcpb));
- op.csbcpb = __pa(csbcpb);
- op.out = __pa(slout.entries);
+ op.csbcpb = nx842_get_pa(csbcpb);
+ op.out = nx842_get_pa(slout.entries);
for (i = 0; i < hdr->blocks_nr; i++) {
/*
@@ -401,13 +410,13 @@
*/
if (likely(max_sync_size == NX842_HW_PAGE_SIZE)) {
/* Create direct DDE */
- op.in = __pa(inbuf);
+ op.in = nx842_get_pa((void *)inbuf);
op.inlen = max_sync_size;
} else {
/* Create indirect DDE (scatterlist) */
nx842_build_scatterlist(inbuf, max_sync_size, &slin);
- op.in = __pa(slin.entries);
+ op.in = nx842_get_pa(slin.entries);
op.inlen = -nx842_get_scatterlist_size(&slin);
}
@@ -565,7 +574,7 @@
op.flags = NX842_OP_DECOMPRESS;
csbcpb = &workmem->csbcpb;
memset(csbcpb, 0, sizeof(*csbcpb));
- op.csbcpb = __pa(csbcpb);
+ op.csbcpb = nx842_get_pa(csbcpb);
/*
* max_sync_size may have changed since compression,
@@ -597,12 +606,12 @@
if (likely((inbuf & NX842_HW_PAGE_MASK) ==
((inbuf + hdr->sizes[i] - 1) & NX842_HW_PAGE_MASK))) {
/* Create direct DDE */
- op.in = __pa(inbuf);
+ op.in = nx842_get_pa((void *)inbuf);
op.inlen = hdr->sizes[i];
} else {
/* Create indirect DDE (scatterlist) */
nx842_build_scatterlist(inbuf, hdr->sizes[i] , &slin);
- op.in = __pa(slin.entries);
+ op.in = nx842_get_pa(slin.entries);
op.inlen = -nx842_get_scatterlist_size(&slin);
}
@@ -613,12 +622,12 @@
*/
if (likely(max_sync_size == NX842_HW_PAGE_SIZE)) {
/* Create direct DDE */
- op.out = __pa(outbuf);
+ op.out = nx842_get_pa((void *)outbuf);
op.outlen = max_sync_size;
} else {
/* Create indirect DDE (scatterlist) */
nx842_build_scatterlist(outbuf, max_sync_size, &slout);
- op.out = __pa(slout.entries);
+ op.out = nx842_get_pa(slout.entries);
op.outlen = -nx842_get_scatterlist_size(&slout);
}
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 9bed1a2..605b016 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -346,6 +346,7 @@
tristate "MOXART DMA support"
depends on ARCH_MOXART
select DMA_ENGINE
+ select DMA_OF
select DMA_VIRTUAL_CHANNELS
help
Enable support for the MOXA ART SoC DMA controller.
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 53fb0c8..766b68e 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -497,8 +497,8 @@
if (!mv_can_chain(grp_start))
goto submit_done;
- dev_dbg(mv_chan_to_devp(mv_chan), "Append to last desc %x\n",
- old_chain_tail->async_tx.phys);
+ dev_dbg(mv_chan_to_devp(mv_chan), "Append to last desc %pa\n",
+ &old_chain_tail->async_tx.phys);
/* fix up the hardware chain */
mv_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys);
@@ -527,7 +527,8 @@
/* returns the number of allocated descriptors */
static int mv_xor_alloc_chan_resources(struct dma_chan *chan)
{
- char *hw_desc;
+ void *virt_desc;
+ dma_addr_t dma_desc;
int idx;
struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
struct mv_xor_desc_slot *slot = NULL;
@@ -542,17 +543,16 @@
" %d descriptor slots", idx);
break;
}
- hw_desc = (char *) mv_chan->dma_desc_pool_virt;
- slot->hw_desc = (void *) &hw_desc[idx * MV_XOR_SLOT_SIZE];
+ virt_desc = mv_chan->dma_desc_pool_virt;
+ slot->hw_desc = virt_desc + idx * MV_XOR_SLOT_SIZE;
dma_async_tx_descriptor_init(&slot->async_tx, chan);
slot->async_tx.tx_submit = mv_xor_tx_submit;
INIT_LIST_HEAD(&slot->chain_node);
INIT_LIST_HEAD(&slot->slot_node);
INIT_LIST_HEAD(&slot->tx_list);
- hw_desc = (char *) mv_chan->dma_desc_pool;
- slot->async_tx.phys =
- (dma_addr_t) &hw_desc[idx * MV_XOR_SLOT_SIZE];
+ dma_desc = mv_chan->dma_desc_pool;
+ slot->async_tx.phys = dma_desc + idx * MV_XOR_SLOT_SIZE;
slot->idx = idx++;
spin_lock_bh(&mv_chan->lock);
@@ -582,8 +582,8 @@
int slot_cnt;
dev_dbg(mv_chan_to_devp(mv_chan),
- "%s dest: %x src %x len: %u flags: %ld\n",
- __func__, dest, src, len, flags);
+ "%s dest: %pad src %pad len: %u flags: %ld\n",
+ __func__, &dest, &src, len, flags);
if (unlikely(len < MV_XOR_MIN_BYTE_COUNT))
return NULL;
@@ -626,8 +626,8 @@
BUG_ON(len > MV_XOR_MAX_BYTE_COUNT);
dev_dbg(mv_chan_to_devp(mv_chan),
- "%s src_cnt: %d len: dest %x %u flags: %ld\n",
- __func__, src_cnt, len, dest, flags);
+ "%s src_cnt: %d len: %u dest %pad flags: %ld\n",
+ __func__, src_cnt, len, &dest, flags);
spin_lock_bh(&mv_chan->lock);
slot_cnt = mv_chan_xor_slot_count(len, src_cnt);
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index e8c9ef0..33edd67 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -559,7 +559,8 @@
*
* called with the mem_ctls_mutex held
*/
-static void edac_mc_workq_setup(struct mem_ctl_info *mci, unsigned msec)
+static void edac_mc_workq_setup(struct mem_ctl_info *mci, unsigned msec,
+ bool init)
{
edac_dbg(0, "\n");
@@ -567,7 +568,9 @@
if (mci->op_state != OP_RUNNING_POLL)
return;
- INIT_DELAYED_WORK(&mci->work, edac_mc_workq_function);
+ if (init)
+ INIT_DELAYED_WORK(&mci->work, edac_mc_workq_function);
+
mod_delayed_work(edac_workqueue, &mci->work, msecs_to_jiffies(msec));
}
@@ -601,7 +604,7 @@
* user space has updated our poll period value, need to
* reset our workq delays
*/
-void edac_mc_reset_delay_period(int value)
+void edac_mc_reset_delay_period(unsigned long value)
{
struct mem_ctl_info *mci;
struct list_head *item;
@@ -611,7 +614,7 @@
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
- edac_mc_workq_setup(mci, (unsigned long) value);
+ edac_mc_workq_setup(mci, value, false);
}
mutex_unlock(&mem_ctls_mutex);
@@ -782,7 +785,7 @@
/* This instance is NOW RUNNING */
mci->op_state = OP_RUNNING_POLL;
- edac_mc_workq_setup(mci, edac_mc_get_poll_msec());
+ edac_mc_workq_setup(mci, edac_mc_get_poll_msec(), true);
} else {
mci->op_state = OP_RUNNING_INTERRUPT;
}
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 51c0362..b335c6a 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -52,18 +52,20 @@
static int edac_set_poll_msec(const char *val, struct kernel_param *kp)
{
- long l;
+ unsigned long l;
int ret;
if (!val)
return -EINVAL;
- ret = kstrtol(val, 0, &l);
+ ret = kstrtoul(val, 0, &l);
if (ret)
return ret;
- if ((int)l != l)
+
+ if (l < 1000)
return -EINVAL;
- *((int *)kp->arg) = l;
+
+ *((unsigned long *)kp->arg) = l;
/* notify edac_mc engine to reset the poll period */
edac_mc_reset_delay_period(l);
diff --git a/drivers/edac/edac_module.h b/drivers/edac/edac_module.h
index 3d139c6..f2118bf 100644
--- a/drivers/edac/edac_module.h
+++ b/drivers/edac/edac_module.h
@@ -52,7 +52,7 @@
extern void edac_device_workq_teardown(struct edac_device_ctl_info *edac_dev);
extern void edac_device_reset_delay_period(struct edac_device_ctl_info
*edac_dev, unsigned long value);
-extern void edac_mc_reset_delay_period(int value);
+extern void edac_mc_reset_delay_period(unsigned long value);
extern void *edac_align_ptr(void **p, unsigned size, int n_elems);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 6973387..903f24d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -403,6 +403,7 @@
config GPIO_TB10X
bool
+ select GENERIC_IRQ_CHIP
select OF_GPIO
comment "I2C GPIO expanders:"
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 233d088..f32357e 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012-2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -657,6 +657,6 @@
module_platform_driver(bcm_kona_gpio_driver);
-MODULE_AUTHOR("Broadcom");
+MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
MODULE_DESCRIPTION("Broadcom Kona GPIO Driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
index d355027..3c2ba2ad 100644
--- a/drivers/gpio/gpio-clps711x.c
+++ b/drivers/gpio/gpio-clps711x.c
@@ -97,3 +97,4 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
MODULE_DESCRIPTION("CLPS711X GPIO driver");
+MODULE_ALIAS("platform:clps711x-gpio");
diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c
index d1b50ef..e585163 100644
--- a/drivers/gpio/gpio-intel-mid.c
+++ b/drivers/gpio/gpio-intel-mid.c
@@ -394,8 +394,8 @@
static int intel_gpio_runtime_idle(struct device *dev)
{
- pm_schedule_suspend(dev, 500);
- return -EBUSY;
+ int err = pm_schedule_suspend(dev, 500);
+ return err ?: -EBUSY;
}
static const struct dev_pm_ops intel_gpio_pm_ops = {
diff --git a/drivers/gpio/gpio-xtensa.c b/drivers/gpio/gpio-xtensa.c
index 1d136ec..7081304 100644
--- a/drivers/gpio/gpio-xtensa.c
+++ b/drivers/gpio/gpio-xtensa.c
@@ -40,6 +40,8 @@
#error GPIO32 option is not enabled for your xtensa core variant
#endif
+#if XCHAL_HAVE_CP
+
static inline unsigned long enable_cp(unsigned long *cpenable)
{
unsigned long flags;
@@ -57,6 +59,20 @@
local_irq_restore(flags);
}
+#else
+
+static inline unsigned long enable_cp(unsigned long *cpenable)
+{
+ *cpenable = 0; /* avoid uninitialized value warning */
+ return 0;
+}
+
+static inline void disable_cp(unsigned long flags, unsigned long cpenable)
+{
+}
+
+#endif /* XCHAL_HAVE_CP */
+
static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
{
return 1; /* input only */
diff --git a/drivers/gpu/drm/ast/ast_fb.c b/drivers/gpu/drm/ast/ast_fb.c
index 3f65dd6..a28640f 100644
--- a/drivers/gpu/drm/ast/ast_fb.c
+++ b/drivers/gpu/drm/ast/ast_fb.c
@@ -65,7 +65,7 @@
* then the BO is being moved and we should
* store up the damage until later.
*/
- if (!drm_can_sleep())
+ if (drm_can_sleep())
ret = ast_bo_reserve(bo, true);
if (ret) {
if (ret != -EBUSY)
diff --git a/drivers/gpu/drm/cirrus/cirrus_fbdev.c b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
index 2fd4a92..32bbba0 100644
--- a/drivers/gpu/drm/cirrus/cirrus_fbdev.c
+++ b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
@@ -39,7 +39,7 @@
* then the BO is being moved and we should
* store up the damage until later.
*/
- if (!drm_can_sleep())
+ if (drm_can_sleep())
ret = cirrus_bo_reserve(bo, true);
if (ret) {
if (ret != -EBUSY)
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index f227f54..6e1a1a2 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -51,7 +51,7 @@
config DRM_EXYNOS_IPP
bool "Exynos DRM IPP"
- depends on DRM_EXYNOS && !ARCH_MULTIPLATFORM
+ depends on DRM_EXYNOS
help
Choose this option if you want to use IPP feature for DRM.
@@ -69,6 +69,6 @@
config DRM_EXYNOS_GSC
bool "Exynos DRM GSC"
- depends on DRM_EXYNOS_IPP && ARCH_EXYNOS5
+ depends on DRM_EXYNOS_IPP && ARCH_EXYNOS5 && !ARCH_MULTIPLATFORM
help
Choose this option if you want to use Exynos GSC for DRM.
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 9d096a0..215131a 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -171,22 +171,24 @@
file->driver_priv = file_priv;
ret = exynos_drm_subdrv_open(dev, file);
- if (ret) {
- kfree(file_priv);
- file->driver_priv = NULL;
- }
+ if (ret)
+ goto out;
anon_filp = anon_inode_getfile("exynos_gem", &exynos_drm_gem_fops,
NULL, 0);
if (IS_ERR(anon_filp)) {
- kfree(file_priv);
- return PTR_ERR(anon_filp);
+ ret = PTR_ERR(anon_filp);
+ goto out;
}
anon_filp->f_mode = FMODE_READ | FMODE_WRITE;
file_priv->anon_filp = anon_filp;
return ret;
+out:
+ kfree(file_priv);
+ file->driver_priv = NULL;
+ return ret;
}
static void exynos_drm_preclose(struct drm_device *dev,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
index 380aec2..6c1885e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
@@ -607,7 +607,7 @@
reg_type = REG_TYPE_NONE;
DRM_ERROR("Unknown register offset![%d]\n", reg_offset);
break;
- };
+ }
return reg_type;
}
diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c
index d519a4e..09312b8 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c
@@ -16,7 +16,6 @@
#include <linux/types.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
-#include <plat/map-base.h>
#include <drm/drmP.h>
#include <drm/exynos_drm.h>
@@ -826,7 +825,7 @@
DRM_DEBUG_KMS("count[%d]e[0x%x]\n", count++, (int)e);
/*
- * quf == NULL condition means all event deletion.
+ * qbuf == NULL condition means all event deletion.
* stop operations want to delete all event list.
* another case delete only same buf id.
*/
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index a0e10ae..c021ddc 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -34,6 +34,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/hdmi.h>
#include <drm/exynos_drm.h>
@@ -59,19 +60,6 @@
#define HDMI_AUI_VERSION 0x01
#define HDMI_AUI_LENGTH 0x0A
-/* HDMI infoframe to configure HDMI out packet header, AUI and AVI */
-enum HDMI_PACKET_TYPE {
- /* refer to Table 5-8 Packet Type in HDMI specification v1.4a */
- /* InfoFrame packet type */
- HDMI_PACKET_TYPE_INFOFRAME = 0x80,
- /* Vendor-Specific InfoFrame */
- HDMI_PACKET_TYPE_VSI = HDMI_PACKET_TYPE_INFOFRAME + 1,
- /* Auxiliary Video information InfoFrame */
- HDMI_PACKET_TYPE_AVI = HDMI_PACKET_TYPE_INFOFRAME + 2,
- /* Audio information InfoFrame */
- HDMI_PACKET_TYPE_AUI = HDMI_PACKET_TYPE_INFOFRAME + 4
-};
-
enum hdmi_type {
HDMI_TYPE13,
HDMI_TYPE14,
@@ -379,12 +367,6 @@
},
};
-struct hdmi_infoframe {
- enum HDMI_PACKET_TYPE type;
- u8 ver;
- u8 len;
-};
-
static inline u32 hdmi_reg_read(struct hdmi_context *hdata, u32 reg_id)
{
return readl(hdata->regs + reg_id);
@@ -682,7 +664,7 @@
}
static void hdmi_reg_infoframe(struct hdmi_context *hdata,
- struct hdmi_infoframe *infoframe)
+ union hdmi_infoframe *infoframe)
{
u32 hdr_sum;
u8 chksum;
@@ -700,13 +682,15 @@
return;
}
- switch (infoframe->type) {
- case HDMI_PACKET_TYPE_AVI:
+ switch (infoframe->any.type) {
+ case HDMI_INFOFRAME_TYPE_AVI:
hdmi_reg_writeb(hdata, HDMI_AVI_CON, HDMI_AVI_CON_EVERY_VSYNC);
- hdmi_reg_writeb(hdata, HDMI_AVI_HEADER0, infoframe->type);
- hdmi_reg_writeb(hdata, HDMI_AVI_HEADER1, infoframe->ver);
- hdmi_reg_writeb(hdata, HDMI_AVI_HEADER2, infoframe->len);
- hdr_sum = infoframe->type + infoframe->ver + infoframe->len;
+ hdmi_reg_writeb(hdata, HDMI_AVI_HEADER0, infoframe->any.type);
+ hdmi_reg_writeb(hdata, HDMI_AVI_HEADER1,
+ infoframe->any.version);
+ hdmi_reg_writeb(hdata, HDMI_AVI_HEADER2, infoframe->any.length);
+ hdr_sum = infoframe->any.type + infoframe->any.version +
+ infoframe->any.length;
/* Output format zero hardcoded ,RGB YBCR selection */
hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(1), 0 << 5 |
@@ -722,18 +706,20 @@
hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(4), vic);
chksum = hdmi_chksum(hdata, HDMI_AVI_BYTE(1),
- infoframe->len, hdr_sum);
+ infoframe->any.length, hdr_sum);
DRM_DEBUG_KMS("AVI checksum = 0x%x\n", chksum);
hdmi_reg_writeb(hdata, HDMI_AVI_CHECK_SUM, chksum);
break;
- case HDMI_PACKET_TYPE_AUI:
+ case HDMI_INFOFRAME_TYPE_AUDIO:
hdmi_reg_writeb(hdata, HDMI_AUI_CON, 0x02);
- hdmi_reg_writeb(hdata, HDMI_AUI_HEADER0, infoframe->type);
- hdmi_reg_writeb(hdata, HDMI_AUI_HEADER1, infoframe->ver);
- hdmi_reg_writeb(hdata, HDMI_AUI_HEADER2, infoframe->len);
- hdr_sum = infoframe->type + infoframe->ver + infoframe->len;
+ hdmi_reg_writeb(hdata, HDMI_AUI_HEADER0, infoframe->any.type);
+ hdmi_reg_writeb(hdata, HDMI_AUI_HEADER1,
+ infoframe->any.version);
+ hdmi_reg_writeb(hdata, HDMI_AUI_HEADER2, infoframe->any.length);
+ hdr_sum = infoframe->any.type + infoframe->any.version +
+ infoframe->any.length;
chksum = hdmi_chksum(hdata, HDMI_AUI_BYTE(1),
- infoframe->len, hdr_sum);
+ infoframe->any.length, hdr_sum);
DRM_DEBUG_KMS("AUI checksum = 0x%x\n", chksum);
hdmi_reg_writeb(hdata, HDMI_AUI_CHECK_SUM, chksum);
break;
@@ -985,7 +971,7 @@
static void hdmi_conf_init(struct hdmi_context *hdata)
{
- struct hdmi_infoframe infoframe;
+ union hdmi_infoframe infoframe;
/* disable HPD interrupts from HDMI IP block, use GPIO instead */
hdmi_reg_writemask(hdata, HDMI_INTC_CON, 0, HDMI_INTC_EN_GLOBAL |
@@ -1021,14 +1007,14 @@
hdmi_reg_writeb(hdata, HDMI_V13_AUI_CON, 0x02);
hdmi_reg_writeb(hdata, HDMI_V13_ACR_CON, 0x04);
} else {
- infoframe.type = HDMI_PACKET_TYPE_AVI;
- infoframe.ver = HDMI_AVI_VERSION;
- infoframe.len = HDMI_AVI_LENGTH;
+ infoframe.any.type = HDMI_INFOFRAME_TYPE_AVI;
+ infoframe.any.version = HDMI_AVI_VERSION;
+ infoframe.any.length = HDMI_AVI_LENGTH;
hdmi_reg_infoframe(hdata, &infoframe);
- infoframe.type = HDMI_PACKET_TYPE_AUI;
- infoframe.ver = HDMI_AUI_VERSION;
- infoframe.len = HDMI_AUI_LENGTH;
+ infoframe.any.type = HDMI_INFOFRAME_TYPE_AUDIO;
+ infoframe.any.version = HDMI_AUI_VERSION;
+ infoframe.any.length = HDMI_AUI_LENGTH;
hdmi_reg_infoframe(hdata, &infoframe);
/* enable AVI packet every vsync, fixes purple line problem */
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 400b0c4..fa18cf3 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -208,7 +208,7 @@
# define PLL_SERIAL_1_SRL_IZ(x) (((x) & 3) << 1)
# define PLL_SERIAL_1_SRL_MAN_IZ (1 << 6)
#define REG_PLL_SERIAL_2 REG(0x02, 0x01) /* read/write */
-# define PLL_SERIAL_2_SRL_NOSC(x) (((x) & 3) << 0)
+# define PLL_SERIAL_2_SRL_NOSC(x) ((x) << 0)
# define PLL_SERIAL_2_SRL_PR(x) (((x) & 0xf) << 4)
#define REG_PLL_SERIAL_3 REG(0x02, 0x02) /* read/write */
# define PLL_SERIAL_3_SRL_CCIR (1 << 0)
@@ -528,10 +528,10 @@
{
uint8_t buf[PB(5) + 1];
+ memset(buf, 0, sizeof(buf));
buf[HB(0)] = 0x84;
buf[HB(1)] = 0x01;
buf[HB(2)] = 10;
- buf[PB(0)] = 0;
buf[PB(1)] = p->audio_frame[1] & 0x07; /* CC */
buf[PB(2)] = p->audio_frame[2] & 0x1c; /* SF */
buf[PB(4)] = p->audio_frame[4];
@@ -824,6 +824,11 @@
}
div = 148500 / mode->clock;
+ if (div != 0) {
+ div--;
+ if (div > 3)
+ div = 3;
+ }
/* mute the audio FIFO: */
reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
@@ -913,7 +918,7 @@
if (priv->rev == TDA19988) {
/* let incoming pixels fill the active space (if any) */
- reg_write(encoder, REG_ENABLE_SPACE, 0x01);
+ reg_write(encoder, REG_ENABLE_SPACE, 0x00);
}
/* must be last register set: */
@@ -1094,6 +1099,8 @@
{
struct tda998x_priv *priv = to_tda998x_priv(encoder);
drm_i2c_encoder_destroy(encoder);
+ if (priv->cec)
+ i2c_unregister_device(priv->cec);
kfree(priv);
}
@@ -1142,8 +1149,10 @@
priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1);
priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5);
- priv->current_page = 0;
+ priv->current_page = 0xff;
priv->cec = i2c_new_dummy(client->adapter, 0x34);
+ if (!priv->cec)
+ return -ENODEV;
priv->dpms = DRM_MODE_DPMS_OFF;
encoder_slave->slave_priv = priv;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 4a2bf8e..df77e20 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1831,6 +1831,14 @@
/* Early gen2 have a totally busted CS tlb and require pinned batches. */
#define HAS_BROKEN_CS_TLB(dev) (IS_I830(dev) || IS_845G(dev))
+/*
+ * dp aux and gmbus irq on gen4 seems to be able to generate legacy interrupts
+ * even when in MSI mode. This results in spurious interrupt warnings if the
+ * legacy irq no. is shared with another device. The kernel then disables that
+ * interrupt source and so prevents the other device from working properly.
+ */
+#define HAS_AUX_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
+#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
* rows, which changed the alignment requirements and fence programming.
diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c
index d7fd2fd2..990cf8f 100644
--- a/drivers/gpu/drm/i915/i915_gpu_error.c
+++ b/drivers/gpu/drm/i915/i915_gpu_error.c
@@ -146,7 +146,10 @@
va_list tmp;
va_copy(tmp, args);
- if (!__i915_error_seek(e, vsnprintf(NULL, 0, f, tmp)))
+ len = vsnprintf(NULL, 0, f, tmp);
+ va_end(tmp);
+
+ if (!__i915_error_seek(e, len))
return;
}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 17d8fcb..9fec711 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -567,8 +567,7 @@
vbl_start = mode->crtc_vblank_start * mode->crtc_htotal;
} else {
- enum transcoder cpu_transcoder =
- intel_pipe_to_cpu_transcoder(dev_priv, pipe);
+ enum transcoder cpu_transcoder = (enum transcoder) pipe;
u32 htotal;
htotal = ((I915_READ(HTOTAL(cpu_transcoder)) >> 16) & 0x1fff) + 1;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5ede4e8..2f517b8 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -404,7 +404,7 @@
int i, ret, recv_bytes;
uint32_t status;
int try, precharge, clock = 0;
- bool has_aux_irq = true;
+ bool has_aux_irq = HAS_AUX_IRQ(dev);
uint32_t timeout;
/* dp aux is extremely sensitive to irq latency, hence request the
@@ -1869,10 +1869,12 @@
mutex_unlock(&dev_priv->dpio_lock);
- /* init power sequencer on this pipe and port */
- intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
- intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
- &power_seq);
+ if (is_edp(intel_dp)) {
+ /* init power sequencer on this pipe and port */
+ intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
+ intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
+ &power_seq);
+ }
intel_enable_dp(encoder);
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index b1dc33f..d33b61d 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -258,13 +258,6 @@
algo->data = bus;
}
-/*
- * gmbus on gen4 seems to be able to generate legacy interrupts even when in MSI
- * mode. This results in spurious interrupt warnings if the legacy irq no. is
- * shared with another device. The kernel then disables that interrupt source
- * and so prevents the other device from working properly.
- */
-#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
static int
gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
u32 gmbus2_status,
diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index 4e960ec..acde294 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -226,6 +226,8 @@
#define ACPI_DIGITAL_OUTPUT (3<<8)
#define ACPI_LVDS_OUTPUT (4<<8)
+#define MAX_DSLP 1500
+
#ifdef CONFIG_ACPI
static int swsci(struct drm_device *dev, u32 function, u32 parm, u32 *parm_out)
{
@@ -260,10 +262,11 @@
/* The spec says 2ms should be the default, but it's too small
* for some machines. */
dslp = 50;
- } else if (dslp > 500) {
+ } else if (dslp > MAX_DSLP) {
/* Hey bios, trust must be earned. */
- WARN_ONCE(1, "excessive driver sleep timeout (DSPL) %u\n", dslp);
- dslp = 500;
+ DRM_INFO_ONCE("ACPI BIOS requests an excessive sleep of %u ms, "
+ "using %u ms instead\n", dslp, MAX_DSLP);
+ dslp = MAX_DSLP;
}
/* The spec tells us to do this, but we are the only user... */
diff --git a/drivers/gpu/drm/mgag200/mgag200_fb.c b/drivers/gpu/drm/mgag200/mgag200_fb.c
index f9adc27..13b7dd8 100644
--- a/drivers/gpu/drm/mgag200/mgag200_fb.c
+++ b/drivers/gpu/drm/mgag200/mgag200_fb.c
@@ -41,7 +41,7 @@
* then the BO is being moved and we should
* store up the damage until later.
*/
- if (!drm_can_sleep())
+ if (drm_can_sleep())
ret = mgag200_bo_reserve(bo, true);
if (ret) {
if (ret != -EBUSY)
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index b8583f2..9683747 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1519,11 +1519,11 @@
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (32700 * 1024))) {
return MODE_BANDWIDTH;
- } else if (mode->type == G200_EH &&
+ } else if (mdev->type == G200_EH &&
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (37500 * 1024))) {
return MODE_BANDWIDTH;
- } else if (mode->type == G200_ER &&
+ } else if (mdev->type == G200_ER &&
(mga_vga_calculate_mode_bandwidth(mode,
bpp) > (55000 * 1024))) {
return MODE_BANDWIDTH;
diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c
index 1964f4f..84c5b13 100644
--- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c
+++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c
@@ -39,6 +39,7 @@
spinlock_t lock;
bool stale;
uint32_t width, height;
+ uint32_t x, y;
/* next cursor to scan-out: */
uint32_t next_iova;
@@ -57,9 +58,16 @@
#define PENDING_FLIP 0x2
atomic_t pending;
- /* the fb that we currently hold a scanout ref to: */
+ /* the fb that we logically (from PoV of KMS API) hold a ref
+ * to. Which we may not yet be scanning out (we may still
+ * be scanning out previous in case of page_flip while waiting
+ * for gpu rendering to complete:
+ */
struct drm_framebuffer *fb;
+ /* the fb that we currently hold a scanout ref to: */
+ struct drm_framebuffer *scanout_fb;
+
/* for unref'ing framebuffers after scanout completes: */
struct drm_flip_work unref_fb_work;
@@ -77,24 +85,73 @@
return to_mdp4_kms(to_mdp_kms(priv->kms));
}
-static void update_fb(struct drm_crtc *crtc, bool async,
- struct drm_framebuffer *new_fb)
+static void request_pending(struct drm_crtc *crtc, uint32_t pending)
+{
+ struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
+
+ atomic_or(pending, &mdp4_crtc->pending);
+ mdp_irq_register(&get_kms(crtc)->base, &mdp4_crtc->vblank);
+}
+
+static void crtc_flush(struct drm_crtc *crtc)
+{
+ struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
+ struct mdp4_kms *mdp4_kms = get_kms(crtc);
+ uint32_t i, flush = 0;
+
+ for (i = 0; i < ARRAY_SIZE(mdp4_crtc->planes); i++) {
+ struct drm_plane *plane = mdp4_crtc->planes[i];
+ if (plane) {
+ enum mdp4_pipe pipe_id = mdp4_plane_pipe(plane);
+ flush |= pipe2flush(pipe_id);
+ }
+ }
+ flush |= ovlp2flush(mdp4_crtc->ovlp);
+
+ DBG("%s: flush=%08x", mdp4_crtc->name, flush);
+
+ mdp4_write(mdp4_kms, REG_MDP4_OVERLAY_FLUSH, flush);
+}
+
+static void update_fb(struct drm_crtc *crtc, struct drm_framebuffer *new_fb)
{
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
struct drm_framebuffer *old_fb = mdp4_crtc->fb;
- if (old_fb)
- drm_flip_work_queue(&mdp4_crtc->unref_fb_work, old_fb);
-
/* grab reference to incoming scanout fb: */
drm_framebuffer_reference(new_fb);
mdp4_crtc->base.fb = new_fb;
mdp4_crtc->fb = new_fb;
- if (!async) {
- /* enable vblank to pick up the old_fb */
- mdp_irq_register(&get_kms(crtc)->base, &mdp4_crtc->vblank);
- }
+ if (old_fb)
+ drm_flip_work_queue(&mdp4_crtc->unref_fb_work, old_fb);
+}
+
+/* unlike update_fb(), take a ref to the new scanout fb *before* updating
+ * plane, then call this. Needed to ensure we don't unref the buffer that
+ * is actually still being scanned out.
+ *
+ * Note that this whole thing goes away with atomic.. since we can defer
+ * calling into driver until rendering is done.
+ */
+static void update_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
+{
+ struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
+
+ /* flush updates, to make sure hw is updated to new scanout fb,
+ * so that we can safely queue unref to current fb (ie. next
+ * vblank we know hw is done w/ previous scanout_fb).
+ */
+ crtc_flush(crtc);
+
+ if (mdp4_crtc->scanout_fb)
+ drm_flip_work_queue(&mdp4_crtc->unref_fb_work,
+ mdp4_crtc->scanout_fb);
+
+ mdp4_crtc->scanout_fb = fb;
+
+ /* enable vblank to complete flip: */
+ request_pending(crtc, PENDING_FLIP);
}
/* if file!=NULL, this is preclose potential cancel-flip path */
@@ -120,34 +177,6 @@
spin_unlock_irqrestore(&dev->event_lock, flags);
}
-static void crtc_flush(struct drm_crtc *crtc)
-{
- struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
- struct mdp4_kms *mdp4_kms = get_kms(crtc);
- uint32_t i, flush = 0;
-
- for (i = 0; i < ARRAY_SIZE(mdp4_crtc->planes); i++) {
- struct drm_plane *plane = mdp4_crtc->planes[i];
- if (plane) {
- enum mdp4_pipe pipe_id = mdp4_plane_pipe(plane);
- flush |= pipe2flush(pipe_id);
- }
- }
- flush |= ovlp2flush(mdp4_crtc->ovlp);
-
- DBG("%s: flush=%08x", mdp4_crtc->name, flush);
-
- mdp4_write(mdp4_kms, REG_MDP4_OVERLAY_FLUSH, flush);
-}
-
-static void request_pending(struct drm_crtc *crtc, uint32_t pending)
-{
- struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
-
- atomic_or(pending, &mdp4_crtc->pending);
- mdp_irq_register(&get_kms(crtc)->base, &mdp4_crtc->vblank);
-}
-
static void pageflip_cb(struct msm_fence_cb *cb)
{
struct mdp4_crtc *mdp4_crtc =
@@ -158,11 +187,9 @@
if (!fb)
return;
+ drm_framebuffer_reference(fb);
mdp4_plane_set_scanout(mdp4_crtc->plane, fb);
- crtc_flush(crtc);
-
- /* enable vblank to complete flip: */
- request_pending(crtc, PENDING_FLIP);
+ update_scanout(crtc, fb);
}
static void unref_fb_worker(struct drm_flip_work *work, void *val)
@@ -320,6 +347,20 @@
mode->vsync_end, mode->vtotal,
mode->type, mode->flags);
+ /* grab extra ref for update_scanout() */
+ drm_framebuffer_reference(crtc->fb);
+
+ ret = mdp4_plane_mode_set(mdp4_crtc->plane, crtc, crtc->fb,
+ 0, 0, mode->hdisplay, mode->vdisplay,
+ x << 16, y << 16,
+ mode->hdisplay << 16, mode->vdisplay << 16);
+ if (ret) {
+ drm_framebuffer_unreference(crtc->fb);
+ dev_err(crtc->dev->dev, "%s: failed to set mode on plane: %d\n",
+ mdp4_crtc->name, ret);
+ return ret;
+ }
+
mdp4_write(mdp4_kms, REG_MDP4_DMA_SRC_SIZE(dma),
MDP4_DMA_SRC_SIZE_WIDTH(mode->hdisplay) |
MDP4_DMA_SRC_SIZE_HEIGHT(mode->vdisplay));
@@ -341,24 +382,15 @@
mdp4_write(mdp4_kms, REG_MDP4_OVLP_CFG(ovlp), 1);
- update_fb(crtc, false, crtc->fb);
-
- ret = mdp4_plane_mode_set(mdp4_crtc->plane, crtc, crtc->fb,
- 0, 0, mode->hdisplay, mode->vdisplay,
- x << 16, y << 16,
- mode->hdisplay << 16, mode->vdisplay << 16);
- if (ret) {
- dev_err(crtc->dev->dev, "%s: failed to set mode on plane: %d\n",
- mdp4_crtc->name, ret);
- return ret;
- }
-
if (dma == DMA_E) {
mdp4_write(mdp4_kms, REG_MDP4_DMA_E_QUANT(0), 0x00ff0000);
mdp4_write(mdp4_kms, REG_MDP4_DMA_E_QUANT(1), 0x00ff0000);
mdp4_write(mdp4_kms, REG_MDP4_DMA_E_QUANT(2), 0x00ff0000);
}
+ update_fb(crtc, crtc->fb);
+ update_scanout(crtc, crtc->fb);
+
return 0;
}
@@ -385,13 +417,24 @@
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
struct drm_plane *plane = mdp4_crtc->plane;
struct drm_display_mode *mode = &crtc->mode;
+ int ret;
- update_fb(crtc, false, crtc->fb);
+ /* grab extra ref for update_scanout() */
+ drm_framebuffer_reference(crtc->fb);
- return mdp4_plane_mode_set(plane, crtc, crtc->fb,
+ ret = mdp4_plane_mode_set(plane, crtc, crtc->fb,
0, 0, mode->hdisplay, mode->vdisplay,
x << 16, y << 16,
mode->hdisplay << 16, mode->vdisplay << 16);
+ if (ret) {
+ drm_framebuffer_unreference(crtc->fb);
+ return ret;
+ }
+
+ update_fb(crtc, crtc->fb);
+ update_scanout(crtc, crtc->fb);
+
+ return 0;
}
static void mdp4_crtc_load_lut(struct drm_crtc *crtc)
@@ -419,7 +462,7 @@
mdp4_crtc->event = event;
spin_unlock_irqrestore(&dev->event_lock, flags);
- update_fb(crtc, true, new_fb);
+ update_fb(crtc, new_fb);
return msm_gem_queue_inactive_cb(obj, &mdp4_crtc->pageflip_cb);
}
@@ -442,12 +485,12 @@
static void update_cursor(struct drm_crtc *crtc)
{
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
+ struct mdp4_kms *mdp4_kms = get_kms(crtc);
enum mdp4_dma dma = mdp4_crtc->dma;
unsigned long flags;
spin_lock_irqsave(&mdp4_crtc->cursor.lock, flags);
if (mdp4_crtc->cursor.stale) {
- struct mdp4_kms *mdp4_kms = get_kms(crtc);
struct drm_gem_object *next_bo = mdp4_crtc->cursor.next_bo;
struct drm_gem_object *prev_bo = mdp4_crtc->cursor.scanout_bo;
uint32_t iova = mdp4_crtc->cursor.next_iova;
@@ -479,6 +522,11 @@
mdp4_crtc->cursor.scanout_bo = next_bo;
mdp4_crtc->cursor.stale = false;
}
+
+ mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_POS(dma),
+ MDP4_DMA_CURSOR_POS_X(mdp4_crtc->cursor.x) |
+ MDP4_DMA_CURSOR_POS_Y(mdp4_crtc->cursor.y));
+
spin_unlock_irqrestore(&mdp4_crtc->cursor.lock, flags);
}
@@ -530,6 +578,7 @@
drm_gem_object_unreference_unlocked(old_bo);
}
+ crtc_flush(crtc);
request_pending(crtc, PENDING_CURSOR);
return 0;
@@ -542,12 +591,15 @@
static int mdp4_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
{
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
- struct mdp4_kms *mdp4_kms = get_kms(crtc);
- enum mdp4_dma dma = mdp4_crtc->dma;
+ unsigned long flags;
- mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_POS(dma),
- MDP4_DMA_CURSOR_POS_X(x) |
- MDP4_DMA_CURSOR_POS_Y(y));
+ spin_lock_irqsave(&mdp4_crtc->cursor.lock, flags);
+ mdp4_crtc->cursor.x = x;
+ mdp4_crtc->cursor.y = y;
+ spin_unlock_irqrestore(&mdp4_crtc->cursor.lock, flags);
+
+ crtc_flush(crtc);
+ request_pending(crtc, PENDING_CURSOR);
return 0;
}
@@ -713,6 +765,7 @@
crtc = &mdp4_crtc->base;
mdp4_crtc->plane = plane;
+ mdp4_crtc->id = id;
mdp4_crtc->ovlp = ovlp_id;
mdp4_crtc->dma = dma_id;
diff --git a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c
index 2406027..1e893dd 100644
--- a/drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c
+++ b/drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c
@@ -170,8 +170,8 @@
MDP4_PIPE_DST_SIZE_HEIGHT(crtc_h));
mdp4_write(mdp4_kms, REG_MDP4_PIPE_DST_XY(pipe),
- MDP4_PIPE_SRC_XY_X(crtc_x) |
- MDP4_PIPE_SRC_XY_Y(crtc_y));
+ MDP4_PIPE_DST_XY_X(crtc_x) |
+ MDP4_PIPE_DST_XY_Y(crtc_y));
mdp4_plane_set_scanout(plane, fb);
diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
index 71a3b23..f279402 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
@@ -296,6 +296,7 @@
x << 16, y << 16,
mode->hdisplay << 16, mode->vdisplay << 16);
if (ret) {
+ drm_framebuffer_unreference(crtc->fb);
dev_err(crtc->dev->dev, "%s: failed to set mode on plane: %d\n",
mdp5_crtc->name, ret);
return ret;
@@ -343,11 +344,15 @@
0, 0, mode->hdisplay, mode->vdisplay,
x << 16, y << 16,
mode->hdisplay << 16, mode->vdisplay << 16);
+ if (ret) {
+ drm_framebuffer_unreference(crtc->fb);
+ return ret;
+ }
update_fb(crtc, crtc->fb);
update_scanout(crtc, crtc->fb);
- return ret;
+ return 0;
}
static void mdp5_crtc_load_lut(struct drm_crtc *crtc)
diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c
index d8d60c9..3da8264 100644
--- a/drivers/gpu/drm/msm/msm_gem.c
+++ b/drivers/gpu/drm/msm/msm_gem.c
@@ -644,7 +644,7 @@
fail:
if (obj)
- drm_gem_object_unreference_unlocked(obj);
+ drm_gem_object_unreference(obj);
return ERR_PTR(ret);
}
diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c
index 5281d4b..5423e91 100644
--- a/drivers/gpu/drm/msm/msm_gem_submit.c
+++ b/drivers/gpu/drm/msm/msm_gem_submit.c
@@ -163,7 +163,7 @@
/* if locking succeeded, pin bo: */
- ret = msm_gem_get_iova(&msm_obj->base,
+ ret = msm_gem_get_iova_locked(&msm_obj->base,
submit->gpu->id, &iova);
/* this would break the logic in the fail path.. there is no
@@ -247,7 +247,7 @@
/* For now, just map the entire thing. Eventually we probably
* to do it page-by-page, w/ kmap() if not vmap()d..
*/
- ptr = msm_gem_vaddr(&obj->base);
+ ptr = msm_gem_vaddr_locked(&obj->base);
if (IS_ERR(ptr)) {
ret = PTR_ERR(ptr);
@@ -307,14 +307,12 @@
{
unsigned i;
- mutex_lock(&submit->dev->struct_mutex);
for (i = 0; i < submit->nr_bos; i++) {
struct msm_gem_object *msm_obj = submit->bos[i].obj;
submit_unlock_unpin_bo(submit, i);
list_del_init(&msm_obj->submit_entry);
drm_gem_object_unreference(&msm_obj->base);
}
- mutex_unlock(&submit->dev->struct_mutex);
ww_acquire_fini(&submit->ticket);
kfree(submit);
@@ -342,6 +340,8 @@
if (args->nr_cmds > MAX_CMDS)
return -EINVAL;
+ mutex_lock(&dev->struct_mutex);
+
submit = submit_create(dev, gpu, args->nr_bos);
if (!submit) {
ret = -ENOMEM;
@@ -410,5 +410,6 @@
out:
if (submit)
submit_cleanup(submit, !!ret);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c
index 4ebce8b..0cfe3f4 100644
--- a/drivers/gpu/drm/msm/msm_gpu.c
+++ b/drivers/gpu/drm/msm/msm_gpu.c
@@ -298,8 +298,6 @@
struct msm_drm_private *priv = dev->dev_private;
int i, ret;
- mutex_lock(&dev->struct_mutex);
-
submit->fence = ++priv->next_fence;
gpu->submitted_fence = submit->fence;
@@ -331,7 +329,6 @@
msm_gem_move_to_active(&msm_obj->base, gpu, true, submit->fence);
}
hangcheck_timer_reset(gpu);
- mutex_unlock(&dev->struct_mutex);
return ret;
}
diff --git a/drivers/gpu/drm/radeon/btc_dpm.c b/drivers/gpu/drm/radeon/btc_dpm.c
index 0fbd36f..ea103cc 100644
--- a/drivers/gpu/drm/radeon/btc_dpm.c
+++ b/drivers/gpu/drm/radeon/btc_dpm.c
@@ -29,6 +29,7 @@
#include "cypress_dpm.h"
#include "btc_dpm.h"
#include "atom.h"
+#include <linux/seq_file.h>
#define MC_CG_ARB_FREQ_F0 0x0a
#define MC_CG_ARB_FREQ_F1 0x0b
@@ -2756,6 +2757,37 @@
r600_free_extended_power_table(rdev);
}
+void btc_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
+ struct seq_file *m)
+{
+ struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
+ struct radeon_ps *rps = &eg_pi->current_rps;
+ struct rv7xx_ps *ps = rv770_get_ps(rps);
+ struct rv7xx_pl *pl;
+ u32 current_index =
+ (RREG32(TARGET_AND_CURRENT_PROFILE_INDEX) & CURRENT_PROFILE_INDEX_MASK) >>
+ CURRENT_PROFILE_INDEX_SHIFT;
+
+ if (current_index > 2) {
+ seq_printf(m, "invalid dpm profile %d\n", current_index);
+ } else {
+ if (current_index == 0)
+ pl = &ps->low;
+ else if (current_index == 1)
+ pl = &ps->medium;
+ else /* current_index == 2 */
+ pl = &ps->high;
+ seq_printf(m, "uvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
+ if (rdev->family >= CHIP_CEDAR) {
+ seq_printf(m, "power level %d sclk: %u mclk: %u vddc: %u vddci: %u\n",
+ current_index, pl->sclk, pl->mclk, pl->vddc, pl->vddci);
+ } else {
+ seq_printf(m, "power level %d sclk: %u mclk: %u vddc: %u\n",
+ current_index, pl->sclk, pl->mclk, pl->vddc);
+ }
+ }
+}
+
u32 btc_dpm_get_sclk(struct radeon_device *rdev, bool low)
{
struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
diff --git a/drivers/gpu/drm/radeon/btcd.h b/drivers/gpu/drm/radeon/btcd.h
index 29e32de..9c65be2 100644
--- a/drivers/gpu/drm/radeon/btcd.h
+++ b/drivers/gpu/drm/radeon/btcd.h
@@ -44,6 +44,10 @@
# define DYN_SPREAD_SPECTRUM_EN (1 << 23)
# define AC_DC_SW (1 << 24)
+#define TARGET_AND_CURRENT_PROFILE_INDEX 0x66c
+# define CURRENT_PROFILE_INDEX_MASK (0xf << 4)
+# define CURRENT_PROFILE_INDEX_SHIFT 4
+
#define CG_BIF_REQ_AND_RSP 0x7f4
#define CG_CLIENT_REQ(x) ((x) << 0)
#define CG_CLIENT_REQ_MASK (0xff << 0)
diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c
index b6e01d5..351db36 100644
--- a/drivers/gpu/drm/radeon/kv_dpm.c
+++ b/drivers/gpu/drm/radeon/kv_dpm.c
@@ -1223,7 +1223,7 @@
int kv_dpm_late_enable(struct radeon_device *rdev)
{
- int ret;
+ int ret = 0;
if (rdev->irq.installed &&
r600_is_internal_thermal_sensor(rdev->pm.int_thermal_type)) {
diff --git a/drivers/gpu/drm/radeon/ni_dpm.c b/drivers/gpu/drm/radeon/ni_dpm.c
index c351226..1217fbc 100644
--- a/drivers/gpu/drm/radeon/ni_dpm.c
+++ b/drivers/gpu/drm/radeon/ni_dpm.c
@@ -3945,7 +3945,6 @@
struct rv7xx_power_info *pi = rv770_get_pi(rdev);
struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
struct ni_ps *ps = ni_get_ps(rps);
- u16 vddc;
struct rv7xx_pl *pl = &ps->performance_levels[index];
ps->performance_level_count = index + 1;
@@ -3961,8 +3960,8 @@
/* patch up vddc if necessary */
if (pl->vddc == 0xff01) {
- if (radeon_atom_get_max_vddc(rdev, 0, 0, &vddc) == 0)
- pl->vddc = vddc;
+ if (pi->max_vddc)
+ pl->vddc = pi->max_vddc;
}
if (rps->class & ATOM_PPLIB_CLASSIFICATION_ACPI) {
@@ -4322,7 +4321,8 @@
void ni_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
struct seq_file *m)
{
- struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
+ struct radeon_ps *rps = &eg_pi->current_rps;
struct ni_ps *ps = ni_get_ps(rps);
struct rv7xx_pl *pl;
u32 current_index =
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 56140b4..cdbc417 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3991,6 +3991,10 @@
break;
}
break;
+ case 124: /* UVD */
+ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
+ radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
+ break;
case 176: /* CP_INT in ring buffer */
case 177: /* CP_INT in IB1 */
case 178: /* CP_INT in IB2 */
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 7b399dc..2812c7d1a 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -1007,8 +1007,22 @@
case R_008C64_SQ_VSTMP_RING_SIZE:
case R_0288C8_SQ_GS_VERT_ITEMSIZE:
/* get value to populate the IB don't remove */
- tmp =radeon_get_ib_value(p, idx);
- ib[idx] = 0;
+ /*tmp =radeon_get_ib_value(p, idx);
+ ib[idx] = 0;*/
+ break;
+ case SQ_ESGS_RING_BASE:
+ case SQ_GSVS_RING_BASE:
+ case SQ_ESTMP_RING_BASE:
+ case SQ_GSTMP_RING_BASE:
+ case SQ_PSTMP_RING_BASE:
+ case SQ_VSTMP_RING_BASE:
+ r = radeon_cs_packet_next_reloc(p, &reloc, 0);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
break;
case SQ_CONFIG:
track->sq_config = radeon_get_ib_value(p, idx);
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index f74db43..dda02bf 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -1555,7 +1555,7 @@
.get_sclk = &btc_dpm_get_sclk,
.get_mclk = &btc_dpm_get_mclk,
.print_power_state = &rv770_dpm_print_power_state,
- .debugfs_print_current_performance_level = &rv770_dpm_debugfs_print_current_performance_level,
+ .debugfs_print_current_performance_level = &btc_dpm_debugfs_print_current_performance_level,
.force_performance_level = &rv770_dpm_force_performance_level,
.vblank_too_short = &btc_dpm_vblank_too_short,
},
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index b3bc433..ae637cf 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -551,6 +551,8 @@
u32 btc_dpm_get_sclk(struct radeon_device *rdev, bool low);
u32 btc_dpm_get_mclk(struct radeon_device *rdev, bool low);
bool btc_dpm_vblank_too_short(struct radeon_device *rdev);
+void btc_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
+ struct seq_file *m);
int sumo_dpm_init(struct radeon_device *rdev);
int sumo_dpm_enable(struct radeon_device *rdev);
int sumo_dpm_late_enable(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index ec8c388..84a1bbb7 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -78,9 +78,10 @@
* 2.34.0 - Add CIK tiling mode array query
* 2.35.0 - Add CIK macrotile mode array query
* 2.36.0 - Fix CIK DCE tiling setup
+ * 2.37.0 - allow GS ring setup on r6xx/r7xx
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 36
+#define KMS_DRIVER_MINOR 37
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600
index 20bfbda..ec0c682 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/r600
+++ b/drivers/gpu/drm/radeon/reg_srcs/r600
@@ -18,6 +18,7 @@
0x00028A3C VGT_GROUP_VECT_1_FMT_CNTL
0x00028A40 VGT_GS_MODE
0x00028A6C VGT_GS_OUT_PRIM_TYPE
+0x00028B38 VGT_GS_MAX_VERT_OUT
0x000088C8 VGT_GS_PER_ES
0x000088E8 VGT_GS_PER_VS
0x000088D4 VGT_GS_VERTEX_REUSE
diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c
index 80c595a..5b2ea8a 100644
--- a/drivers/gpu/drm/radeon/rv770_dpm.c
+++ b/drivers/gpu/drm/radeon/rv770_dpm.c
@@ -2174,7 +2174,6 @@
struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
struct rv7xx_ps *ps = rv770_get_ps(rps);
u32 sclk, mclk;
- u16 vddc;
struct rv7xx_pl *pl;
switch (index) {
@@ -2214,8 +2213,8 @@
/* patch up vddc if necessary */
if (pl->vddc == 0xff01) {
- if (radeon_atom_get_max_vddc(rdev, 0, 0, &vddc) == 0)
- pl->vddc = vddc;
+ if (pi->max_vddc)
+ pl->vddc = pi->max_vddc;
}
if (rps->class & ATOM_PPLIB_CLASSIFICATION_ACPI) {
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 09ec4f6..8357832 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -6338,6 +6338,10 @@
break;
}
break;
+ case 124: /* UVD */
+ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
+ radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
+ break;
case 146:
case 147:
addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR);
diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index 0471501..eafb0e6 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -6472,7 +6472,8 @@
void si_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
struct seq_file *m)
{
- struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
+ struct radeon_ps *rps = &eg_pi->current_rps;
struct ni_ps *ps = ni_get_ps(rps);
struct rv7xx_pl *pl;
u32 current_index =
diff --git a/drivers/gpu/drm/radeon/sumo_dpm.c b/drivers/gpu/drm/radeon/sumo_dpm.c
index f121efe..8b47b3cd 100644
--- a/drivers/gpu/drm/radeon/sumo_dpm.c
+++ b/drivers/gpu/drm/radeon/sumo_dpm.c
@@ -1807,7 +1807,7 @@
struct seq_file *m)
{
struct sumo_power_info *pi = sumo_get_pi(rdev);
- struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct radeon_ps *rps = &pi->current_rps;
struct sumo_ps *ps = sumo_get_ps(rps);
struct sumo_pl *pl;
u32 current_index =
diff --git a/drivers/gpu/drm/radeon/trinity_dpm.c b/drivers/gpu/drm/radeon/trinity_dpm.c
index 2d44719..2da0e17 100644
--- a/drivers/gpu/drm/radeon/trinity_dpm.c
+++ b/drivers/gpu/drm/radeon/trinity_dpm.c
@@ -1926,7 +1926,8 @@
void trinity_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
struct seq_file *m)
{
- struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct trinity_power_info *pi = trinity_get_pi(rdev);
+ struct radeon_ps *rps = &pi->current_rps;
struct trinity_ps *ps = trinity_get_ps(rps);
struct trinity_pl *pl;
u32 current_index =
diff --git a/drivers/gpu/drm/radeon/uvd_v2_2.c b/drivers/gpu/drm/radeon/uvd_v2_2.c
index 824550d..d177100 100644
--- a/drivers/gpu/drm/radeon/uvd_v2_2.c
+++ b/drivers/gpu/drm/radeon/uvd_v2_2.c
@@ -57,7 +57,6 @@
radeon_ring_write(ring, 0);
radeon_ring_write(ring, PACKET0(UVD_GPCOM_VCPU_CMD, 0));
radeon_ring_write(ring, 2);
- return;
}
/**
diff --git a/drivers/gpu/drm/ttm/ttm_object.c b/drivers/gpu/drm/ttm/ttm_object.c
index 3707985..53b51c4 100644
--- a/drivers/gpu/drm/ttm/ttm_object.c
+++ b/drivers/gpu/drm/ttm/ttm_object.c
@@ -292,7 +292,7 @@
if (ret == 0) {
ref = drm_hash_entry(hash, struct ttm_ref_object, hash);
- if (!kref_get_unless_zero(&ref->kref)) {
+ if (kref_get_unless_zero(&ref->kref)) {
rcu_read_unlock();
break;
}
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 9af9908..75f3190 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -380,6 +380,9 @@
pgoff_t i;
struct page **page = ttm->pages;
+ if (ttm->page_flags & TTM_PAGE_FLAG_SG)
+ return;
+
for (i = 0; i < ttm->num_pages; ++i) {
(*page)->mapping = NULL;
(*page++)->index = 0;
diff --git a/drivers/gpu/drm/vmwgfx/svga3d_reg.h b/drivers/gpu/drm/vmwgfx/svga3d_reg.h
index d95335c..b645647 100644
--- a/drivers/gpu/drm/vmwgfx/svga3d_reg.h
+++ b/drivers/gpu/drm/vmwgfx/svga3d_reg.h
@@ -2583,4 +2583,28 @@
float f;
} SVGA3dDevCapResult;
+typedef enum {
+ SVGA3DCAPS_RECORD_UNKNOWN = 0,
+ SVGA3DCAPS_RECORD_DEVCAPS_MIN = 0x100,
+ SVGA3DCAPS_RECORD_DEVCAPS = 0x100,
+ SVGA3DCAPS_RECORD_DEVCAPS_MAX = 0x1ff,
+} SVGA3dCapsRecordType;
+
+typedef
+struct SVGA3dCapsRecordHeader {
+ uint32 length;
+ SVGA3dCapsRecordType type;
+}
+SVGA3dCapsRecordHeader;
+
+typedef
+struct SVGA3dCapsRecord {
+ SVGA3dCapsRecordHeader header;
+ uint32 data[1];
+}
+SVGA3dCapsRecord;
+
+
+typedef uint32 SVGA3dCapPair[2];
+
#endif /* _SVGA3D_REG_H_ */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_context.c b/drivers/gpu/drm/vmwgfx/vmwgfx_context.c
index 82c41da..9426c53 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_context.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_context.c
@@ -37,7 +37,7 @@
-typedef int (*vmw_scrub_func)(struct vmw_ctx_bindinfo *);
+typedef int (*vmw_scrub_func)(struct vmw_ctx_bindinfo *, bool);
static void vmw_user_context_free(struct vmw_resource *res);
static struct vmw_resource *
@@ -50,9 +50,11 @@
bool readback,
struct ttm_validate_buffer *val_buf);
static int vmw_gb_context_destroy(struct vmw_resource *res);
-static int vmw_context_scrub_shader(struct vmw_ctx_bindinfo *bi);
-static int vmw_context_scrub_render_target(struct vmw_ctx_bindinfo *bi);
-static int vmw_context_scrub_texture(struct vmw_ctx_bindinfo *bi);
+static int vmw_context_scrub_shader(struct vmw_ctx_bindinfo *bi, bool rebind);
+static int vmw_context_scrub_render_target(struct vmw_ctx_bindinfo *bi,
+ bool rebind);
+static int vmw_context_scrub_texture(struct vmw_ctx_bindinfo *bi, bool rebind);
+static void vmw_context_binding_state_scrub(struct vmw_ctx_binding_state *cbs);
static void vmw_context_binding_state_kill(struct vmw_ctx_binding_state *cbs);
static uint64_t vmw_user_context_size;
@@ -111,10 +113,14 @@
if (res->func->destroy == vmw_gb_context_destroy) {
mutex_lock(&dev_priv->cmdbuf_mutex);
+ mutex_lock(&dev_priv->binding_mutex);
+ (void) vmw_context_binding_state_kill
+ (&container_of(res, struct vmw_user_context, res)->cbs);
(void) vmw_gb_context_destroy(res);
if (dev_priv->pinned_bo != NULL &&
!dev_priv->query_cid_valid)
__vmw_execbuf_release_pinned_bo(dev_priv, NULL);
+ mutex_unlock(&dev_priv->binding_mutex);
mutex_unlock(&dev_priv->cmdbuf_mutex);
return;
}
@@ -328,7 +334,7 @@
BUG_ON(bo->mem.mem_type != VMW_PL_MOB);
mutex_lock(&dev_priv->binding_mutex);
- vmw_context_binding_state_kill(&uctx->cbs);
+ vmw_context_binding_state_scrub(&uctx->cbs);
submit_size = sizeof(*cmd2) + (readback ? sizeof(*cmd1) : 0);
@@ -378,10 +384,6 @@
SVGA3dCmdHeader header;
SVGA3dCmdDestroyGBContext body;
} *cmd;
- struct vmw_user_context *uctx =
- container_of(res, struct vmw_user_context, res);
-
- BUG_ON(!list_empty(&uctx->cbs.list));
if (likely(res->id == -1))
return 0;
@@ -528,8 +530,9 @@
* vmw_context_scrub_shader - scrub a shader binding from a context.
*
* @bi: single binding information.
+ * @rebind: Whether to issue a bind instead of scrub command.
*/
-static int vmw_context_scrub_shader(struct vmw_ctx_bindinfo *bi)
+static int vmw_context_scrub_shader(struct vmw_ctx_bindinfo *bi, bool rebind)
{
struct vmw_private *dev_priv = bi->ctx->dev_priv;
struct {
@@ -548,7 +551,8 @@
cmd->header.size = sizeof(cmd->body);
cmd->body.cid = bi->ctx->id;
cmd->body.type = bi->i1.shader_type;
- cmd->body.shid = SVGA3D_INVALID_ID;
+ cmd->body.shid =
+ cpu_to_le32((rebind) ? bi->res->id : SVGA3D_INVALID_ID);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
return 0;
@@ -559,8 +563,10 @@
* from a context.
*
* @bi: single binding information.
+ * @rebind: Whether to issue a bind instead of scrub command.
*/
-static int vmw_context_scrub_render_target(struct vmw_ctx_bindinfo *bi)
+static int vmw_context_scrub_render_target(struct vmw_ctx_bindinfo *bi,
+ bool rebind)
{
struct vmw_private *dev_priv = bi->ctx->dev_priv;
struct {
@@ -579,7 +585,8 @@
cmd->header.size = sizeof(cmd->body);
cmd->body.cid = bi->ctx->id;
cmd->body.type = bi->i1.rt_type;
- cmd->body.target.sid = SVGA3D_INVALID_ID;
+ cmd->body.target.sid =
+ cpu_to_le32((rebind) ? bi->res->id : SVGA3D_INVALID_ID);
cmd->body.target.face = 0;
cmd->body.target.mipmap = 0;
vmw_fifo_commit(dev_priv, sizeof(*cmd));
@@ -591,11 +598,13 @@
* vmw_context_scrub_texture - scrub a texture binding from a context.
*
* @bi: single binding information.
+ * @rebind: Whether to issue a bind instead of scrub command.
*
* TODO: Possibly complement this function with a function that takes
* a list of texture bindings and combines them to a single command.
*/
-static int vmw_context_scrub_texture(struct vmw_ctx_bindinfo *bi)
+static int vmw_context_scrub_texture(struct vmw_ctx_bindinfo *bi,
+ bool rebind)
{
struct vmw_private *dev_priv = bi->ctx->dev_priv;
struct {
@@ -619,7 +628,8 @@
cmd->body.c.cid = bi->ctx->id;
cmd->body.s1.stage = bi->i1.texture_stage;
cmd->body.s1.name = SVGA3D_TS_BIND_TEXTURE;
- cmd->body.s1.value = (uint32) SVGA3D_INVALID_ID;
+ cmd->body.s1.value =
+ cpu_to_le32((rebind) ? bi->res->id : SVGA3D_INVALID_ID);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
return 0;
@@ -692,6 +702,7 @@
vmw_context_binding_drop(loc);
loc->bi = *bi;
+ loc->bi.scrubbed = false;
list_add_tail(&loc->ctx_list, &cbs->list);
INIT_LIST_HEAD(&loc->res_list);
@@ -727,12 +738,11 @@
if (loc->bi.ctx != NULL)
vmw_context_binding_drop(loc);
- loc->bi = *bi;
- list_add_tail(&loc->ctx_list, &cbs->list);
- if (bi->res != NULL)
+ if (bi->res != NULL) {
+ loc->bi = *bi;
+ list_add_tail(&loc->ctx_list, &cbs->list);
list_add_tail(&loc->res_list, &bi->res->binding_head);
- else
- INIT_LIST_HEAD(&loc->res_list);
+ }
}
/**
@@ -746,7 +756,10 @@
*/
static void vmw_context_binding_kill(struct vmw_ctx_binding *cb)
{
- (void) vmw_scrub_funcs[cb->bi.bt](&cb->bi);
+ if (!cb->bi.scrubbed) {
+ (void) vmw_scrub_funcs[cb->bi.bt](&cb->bi, false);
+ cb->bi.scrubbed = true;
+ }
vmw_context_binding_drop(cb);
}
@@ -768,6 +781,27 @@
}
/**
+ * vmw_context_binding_state_scrub - Scrub all bindings associated with a
+ * struct vmw_ctx_binding state structure.
+ *
+ * @cbs: Pointer to the context binding state tracker.
+ *
+ * Emits commands to scrub all bindings associated with the
+ * context binding state tracker.
+ */
+static void vmw_context_binding_state_scrub(struct vmw_ctx_binding_state *cbs)
+{
+ struct vmw_ctx_binding *entry;
+
+ list_for_each_entry(entry, &cbs->list, ctx_list) {
+ if (!entry->bi.scrubbed) {
+ (void) vmw_scrub_funcs[entry->bi.bt](&entry->bi, false);
+ entry->bi.scrubbed = true;
+ }
+ }
+}
+
+/**
* vmw_context_binding_res_list_kill - Kill all bindings on a
* resource binding list
*
@@ -785,6 +819,27 @@
}
/**
+ * vmw_context_binding_res_list_scrub - Scrub all bindings on a
+ * resource binding list
+ *
+ * @head: list head of resource binding list
+ *
+ * Scrub all bindings associated with a specific resource. Typically
+ * called before the resource is evicted.
+ */
+void vmw_context_binding_res_list_scrub(struct list_head *head)
+{
+ struct vmw_ctx_binding *entry;
+
+ list_for_each_entry(entry, head, res_list) {
+ if (!entry->bi.scrubbed) {
+ (void) vmw_scrub_funcs[entry->bi.bt](&entry->bi, false);
+ entry->bi.scrubbed = true;
+ }
+ }
+}
+
+/**
* vmw_context_binding_state_transfer - Commit staged binding info
*
* @ctx: Pointer to context to commit the staged binding info to.
@@ -803,3 +858,50 @@
list_for_each_entry_safe(entry, next, &from->list, ctx_list)
vmw_context_binding_transfer(&uctx->cbs, &entry->bi);
}
+
+/**
+ * vmw_context_rebind_all - Rebind all scrubbed bindings of a context
+ *
+ * @ctx: The context resource
+ *
+ * Walks through the context binding list and rebinds all scrubbed
+ * resources.
+ */
+int vmw_context_rebind_all(struct vmw_resource *ctx)
+{
+ struct vmw_ctx_binding *entry;
+ struct vmw_user_context *uctx =
+ container_of(ctx, struct vmw_user_context, res);
+ struct vmw_ctx_binding_state *cbs = &uctx->cbs;
+ int ret;
+
+ list_for_each_entry(entry, &cbs->list, ctx_list) {
+ if (likely(!entry->bi.scrubbed))
+ continue;
+
+ if (WARN_ON(entry->bi.res == NULL || entry->bi.res->id ==
+ SVGA3D_INVALID_ID))
+ continue;
+
+ ret = vmw_scrub_funcs[entry->bi.bt](&entry->bi, true);
+ if (unlikely(ret != 0))
+ return ret;
+
+ entry->bi.scrubbed = false;
+ }
+
+ return 0;
+}
+
+/**
+ * vmw_context_binding_list - Return a list of context bindings
+ *
+ * @ctx: The context resource
+ *
+ * Returns the current list of bindings of the given context. Note that
+ * this list becomes stale as soon as the dev_priv::binding_mutex is unlocked.
+ */
+struct list_head *vmw_context_binding_list(struct vmw_resource *ctx)
+{
+ return &(container_of(ctx, struct vmw_user_context, res)->cbs.list);
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 9893328..3bdc0ad 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -941,6 +941,7 @@
drm_master_put(&vmw_fp->locked_master);
}
+ vmw_compat_shader_man_destroy(vmw_fp->shman);
ttm_object_file_release(&vmw_fp->tfile);
kfree(vmw_fp);
}
@@ -960,11 +961,17 @@
if (unlikely(vmw_fp->tfile == NULL))
goto out_no_tfile;
+ vmw_fp->shman = vmw_compat_shader_man_create(dev_priv);
+ if (IS_ERR(vmw_fp->shman))
+ goto out_no_shman;
+
file_priv->driver_priv = vmw_fp;
dev_priv->bdev.dev_mapping = dev->dev_mapping;
return 0;
+out_no_shman:
+ ttm_object_file_release(&vmw_fp->tfile);
out_no_tfile:
kfree(vmw_fp);
return ret;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 554e7fa..ecaa302 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -75,10 +75,14 @@
#define VMW_RES_FENCE ttm_driver_type3
#define VMW_RES_SHADER ttm_driver_type4
+struct vmw_compat_shader_manager;
+
struct vmw_fpriv {
struct drm_master *locked_master;
struct ttm_object_file *tfile;
struct list_head fence_events;
+ bool gb_aware;
+ struct vmw_compat_shader_manager *shman;
};
struct vmw_dma_buffer {
@@ -272,6 +276,7 @@
struct vmw_resource *ctx;
struct vmw_resource *res;
enum vmw_ctx_binding_type bt;
+ bool scrubbed;
union {
SVGA3dShaderType shader_type;
SVGA3dRenderTargetType rt_type;
@@ -318,7 +323,7 @@
struct drm_open_hash res_ht;
bool res_ht_initialized;
bool kernel; /**< is the called made from the kernel */
- struct ttm_object_file *tfile;
+ struct vmw_fpriv *fp;
struct list_head validate_nodes;
struct vmw_relocation relocs[VMWGFX_MAX_RELOCATIONS];
uint32_t cur_reloc;
@@ -336,6 +341,7 @@
bool needs_post_query_barrier;
struct vmw_resource *error_resource;
struct vmw_ctx_binding_state staged_bindings;
+ struct list_head staged_shaders;
};
struct vmw_legacy_display;
@@ -569,6 +575,8 @@
extern void vmw_resource_unreference(struct vmw_resource **p_res);
extern struct vmw_resource *vmw_resource_reference(struct vmw_resource *res);
+extern struct vmw_resource *
+vmw_resource_reference_unless_doomed(struct vmw_resource *res);
extern int vmw_resource_validate(struct vmw_resource *res);
extern int vmw_resource_reserve(struct vmw_resource *res, bool no_backup);
extern bool vmw_resource_needs_backup(const struct vmw_resource *res);
@@ -957,6 +965,9 @@
vmw_context_binding_state_transfer(struct vmw_resource *res,
struct vmw_ctx_binding_state *cbs);
extern void vmw_context_binding_res_list_kill(struct list_head *head);
+extern void vmw_context_binding_res_list_scrub(struct list_head *head);
+extern int vmw_context_rebind_all(struct vmw_resource *ctx);
+extern struct list_head *vmw_context_binding_list(struct vmw_resource *ctx);
/*
* Surface management - vmwgfx_surface.c
@@ -991,6 +1002,28 @@
struct drm_file *file_priv);
extern int vmw_shader_destroy_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+extern int vmw_compat_shader_lookup(struct vmw_compat_shader_manager *man,
+ SVGA3dShaderType shader_type,
+ u32 *user_key);
+extern void vmw_compat_shaders_commit(struct vmw_compat_shader_manager *man,
+ struct list_head *list);
+extern void vmw_compat_shaders_revert(struct vmw_compat_shader_manager *man,
+ struct list_head *list);
+extern int vmw_compat_shader_remove(struct vmw_compat_shader_manager *man,
+ u32 user_key,
+ SVGA3dShaderType shader_type,
+ struct list_head *list);
+extern int vmw_compat_shader_add(struct vmw_compat_shader_manager *man,
+ u32 user_key, const void *bytecode,
+ SVGA3dShaderType shader_type,
+ size_t size,
+ struct ttm_object_file *tfile,
+ struct list_head *list);
+extern struct vmw_compat_shader_manager *
+vmw_compat_shader_man_create(struct vmw_private *dev_priv);
+extern void
+vmw_compat_shader_man_destroy(struct vmw_compat_shader_manager *man);
+
/**
* Inline helper functions
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index 7a5f1eb..269b85c 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -114,8 +114,10 @@
* persistent context binding tracker.
*/
if (unlikely(val->staged_bindings)) {
- vmw_context_binding_state_transfer
- (val->res, val->staged_bindings);
+ if (!backoff) {
+ vmw_context_binding_state_transfer
+ (val->res, val->staged_bindings);
+ }
kfree(val->staged_bindings);
val->staged_bindings = NULL;
}
@@ -178,6 +180,44 @@
}
/**
+ * vmw_resource_context_res_add - Put resources previously bound to a context on
+ * the validation list
+ *
+ * @dev_priv: Pointer to a device private structure
+ * @sw_context: Pointer to a software context used for this command submission
+ * @ctx: Pointer to the context resource
+ *
+ * This function puts all resources that were previously bound to @ctx on
+ * the resource validation list. This is part of the context state reemission
+ */
+static int vmw_resource_context_res_add(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ struct vmw_resource *ctx)
+{
+ struct list_head *binding_list;
+ struct vmw_ctx_binding *entry;
+ int ret = 0;
+ struct vmw_resource *res;
+
+ mutex_lock(&dev_priv->binding_mutex);
+ binding_list = vmw_context_binding_list(ctx);
+
+ list_for_each_entry(entry, binding_list, ctx_list) {
+ res = vmw_resource_reference_unless_doomed(entry->bi.res);
+ if (unlikely(res == NULL))
+ continue;
+
+ ret = vmw_resource_val_add(sw_context, entry->bi.res, NULL);
+ vmw_resource_unreference(&res);
+ if (unlikely(ret != 0))
+ break;
+ }
+
+ mutex_unlock(&dev_priv->binding_mutex);
+ return ret;
+}
+
+/**
* vmw_resource_relocation_add - Add a relocation to the relocation list
*
* @list: Pointer to head of relocation list.
@@ -233,8 +273,12 @@
{
struct vmw_resource_relocation *rel;
- list_for_each_entry(rel, list, head)
- cb[rel->offset] = rel->res->id;
+ list_for_each_entry(rel, list, head) {
+ if (likely(rel->res != NULL))
+ cb[rel->offset] = rel->res->id;
+ else
+ cb[rel->offset] = SVGA_3D_CMD_NOP;
+ }
}
static int vmw_cmd_invalid(struct vmw_private *dev_priv,
@@ -379,22 +423,27 @@
}
/**
- * vmw_cmd_res_check - Check that a resource is present and if so, put it
+ * vmw_cmd_compat_res_check - Check that a resource is present and if so, put it
* on the resource validate list unless it's already there.
*
* @dev_priv: Pointer to a device private structure.
* @sw_context: Pointer to the software context.
* @res_type: Resource type.
* @converter: User-space visisble type specific information.
- * @id: Pointer to the location in the command buffer currently being
+ * @id: user-space resource id handle.
+ * @id_loc: Pointer to the location in the command buffer currently being
* parsed from where the user-space resource id handle is located.
+ * @p_val: Pointer to pointer to resource validalidation node. Populated
+ * on exit.
*/
-static int vmw_cmd_res_check(struct vmw_private *dev_priv,
- struct vmw_sw_context *sw_context,
- enum vmw_res_type res_type,
- const struct vmw_user_resource_conv *converter,
- uint32_t *id,
- struct vmw_resource_val_node **p_val)
+static int
+vmw_cmd_compat_res_check(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ enum vmw_res_type res_type,
+ const struct vmw_user_resource_conv *converter,
+ uint32_t id,
+ uint32_t *id_loc,
+ struct vmw_resource_val_node **p_val)
{
struct vmw_res_cache_entry *rcache =
&sw_context->res_cache[res_type];
@@ -402,7 +451,7 @@
struct vmw_resource_val_node *node;
int ret;
- if (*id == SVGA3D_INVALID_ID) {
+ if (id == SVGA3D_INVALID_ID) {
if (p_val)
*p_val = NULL;
if (res_type == vmw_res_context) {
@@ -417,7 +466,7 @@
* resource
*/
- if (likely(rcache->valid && *id == rcache->handle)) {
+ if (likely(rcache->valid && id == rcache->handle)) {
const struct vmw_resource *res = rcache->res;
rcache->node->first_usage = false;
@@ -426,28 +475,28 @@
return vmw_resource_relocation_add
(&sw_context->res_relocations, res,
- id - sw_context->buf_start);
+ id_loc - sw_context->buf_start);
}
ret = vmw_user_resource_lookup_handle(dev_priv,
- sw_context->tfile,
- *id,
+ sw_context->fp->tfile,
+ id,
converter,
&res);
if (unlikely(ret != 0)) {
DRM_ERROR("Could not find or use resource 0x%08x.\n",
- (unsigned) *id);
+ (unsigned) id);
dump_stack();
return ret;
}
rcache->valid = true;
rcache->res = res;
- rcache->handle = *id;
+ rcache->handle = id;
ret = vmw_resource_relocation_add(&sw_context->res_relocations,
res,
- id - sw_context->buf_start);
+ id_loc - sw_context->buf_start);
if (unlikely(ret != 0))
goto out_no_reloc;
@@ -459,7 +508,11 @@
if (p_val)
*p_val = node;
- if (node->first_usage && res_type == vmw_res_context) {
+ if (dev_priv->has_mob && node->first_usage &&
+ res_type == vmw_res_context) {
+ ret = vmw_resource_context_res_add(dev_priv, sw_context, res);
+ if (unlikely(ret != 0))
+ goto out_no_reloc;
node->staged_bindings =
kzalloc(sizeof(*node->staged_bindings), GFP_KERNEL);
if (node->staged_bindings == NULL) {
@@ -481,6 +534,59 @@
}
/**
+ * vmw_cmd_res_check - Check that a resource is present and if so, put it
+ * on the resource validate list unless it's already there.
+ *
+ * @dev_priv: Pointer to a device private structure.
+ * @sw_context: Pointer to the software context.
+ * @res_type: Resource type.
+ * @converter: User-space visisble type specific information.
+ * @id_loc: Pointer to the location in the command buffer currently being
+ * parsed from where the user-space resource id handle is located.
+ * @p_val: Pointer to pointer to resource validalidation node. Populated
+ * on exit.
+ */
+static int
+vmw_cmd_res_check(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ enum vmw_res_type res_type,
+ const struct vmw_user_resource_conv *converter,
+ uint32_t *id_loc,
+ struct vmw_resource_val_node **p_val)
+{
+ return vmw_cmd_compat_res_check(dev_priv, sw_context, res_type,
+ converter, *id_loc, id_loc, p_val);
+}
+
+/**
+ * vmw_rebind_contexts - Rebind all resources previously bound to
+ * referenced contexts.
+ *
+ * @sw_context: Pointer to the software context.
+ *
+ * Rebind context binding points that have been scrubbed because of eviction.
+ */
+static int vmw_rebind_contexts(struct vmw_sw_context *sw_context)
+{
+ struct vmw_resource_val_node *val;
+ int ret;
+
+ list_for_each_entry(val, &sw_context->resource_list, head) {
+ if (likely(!val->staged_bindings))
+ continue;
+
+ ret = vmw_context_rebind_all(val->res);
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Failed to rebind context.\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
* vmw_cmd_cid_check - Check a command header for valid context information.
*
* @dev_priv: Pointer to a device private structure.
@@ -767,7 +873,7 @@
struct vmw_relocation *reloc;
int ret;
- ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo);
+ ret = vmw_user_dmabuf_lookup(sw_context->fp->tfile, handle, &vmw_bo);
if (unlikely(ret != 0)) {
DRM_ERROR("Could not find or use MOB buffer.\n");
return -EINVAL;
@@ -828,7 +934,7 @@
struct vmw_relocation *reloc;
int ret;
- ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo);
+ ret = vmw_user_dmabuf_lookup(sw_context->fp->tfile, handle, &vmw_bo);
if (unlikely(ret != 0)) {
DRM_ERROR("Could not find or use GMR region.\n");
return -EINVAL;
@@ -1127,7 +1233,8 @@
srf = vmw_res_to_srf(sw_context->res_cache[vmw_res_surface].res);
- vmw_kms_cursor_snoop(srf, sw_context->tfile, &vmw_bo->base, header);
+ vmw_kms_cursor_snoop(srf, sw_context->fp->tfile, &vmw_bo->base,
+ header);
out_no_surface:
vmw_dmabuf_unreference(&vmw_bo);
@@ -1478,6 +1585,98 @@
&cmd->body.sid, NULL);
}
+
+/**
+ * vmw_cmd_shader_define - Validate an SVGA_3D_CMD_SHADER_DEFINE
+ * command
+ *
+ * @dev_priv: Pointer to a device private struct.
+ * @sw_context: The software context being used for this batch.
+ * @header: Pointer to the command header in the command stream.
+ */
+static int vmw_cmd_shader_define(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGA3dCmdHeader *header)
+{
+ struct vmw_shader_define_cmd {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdDefineShader body;
+ } *cmd;
+ int ret;
+ size_t size;
+
+ cmd = container_of(header, struct vmw_shader_define_cmd,
+ header);
+
+ ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_context,
+ user_context_converter, &cmd->body.cid,
+ NULL);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (unlikely(!dev_priv->has_mob))
+ return 0;
+
+ size = cmd->header.size - sizeof(cmd->body);
+ ret = vmw_compat_shader_add(sw_context->fp->shman,
+ cmd->body.shid, cmd + 1,
+ cmd->body.type, size,
+ sw_context->fp->tfile,
+ &sw_context->staged_shaders);
+ if (unlikely(ret != 0))
+ return ret;
+
+ return vmw_resource_relocation_add(&sw_context->res_relocations,
+ NULL, &cmd->header.id -
+ sw_context->buf_start);
+
+ return 0;
+}
+
+/**
+ * vmw_cmd_shader_destroy - Validate an SVGA_3D_CMD_SHADER_DESTROY
+ * command
+ *
+ * @dev_priv: Pointer to a device private struct.
+ * @sw_context: The software context being used for this batch.
+ * @header: Pointer to the command header in the command stream.
+ */
+static int vmw_cmd_shader_destroy(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGA3dCmdHeader *header)
+{
+ struct vmw_shader_destroy_cmd {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdDestroyShader body;
+ } *cmd;
+ int ret;
+
+ cmd = container_of(header, struct vmw_shader_destroy_cmd,
+ header);
+
+ ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_context,
+ user_context_converter, &cmd->body.cid,
+ NULL);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (unlikely(!dev_priv->has_mob))
+ return 0;
+
+ ret = vmw_compat_shader_remove(sw_context->fp->shman,
+ cmd->body.shid,
+ cmd->body.type,
+ &sw_context->staged_shaders);
+ if (unlikely(ret != 0))
+ return ret;
+
+ return vmw_resource_relocation_add(&sw_context->res_relocations,
+ NULL, &cmd->header.id -
+ sw_context->buf_start);
+
+ return 0;
+}
+
/**
* vmw_cmd_set_shader - Validate an SVGA_3D_CMD_SET_SHADER
* command
@@ -1509,10 +1708,18 @@
if (dev_priv->has_mob) {
struct vmw_ctx_bindinfo bi;
struct vmw_resource_val_node *res_node;
+ u32 shid = cmd->body.shid;
- ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_shader,
- user_shader_converter,
- &cmd->body.shid, &res_node);
+ if (shid != SVGA3D_INVALID_ID)
+ (void) vmw_compat_shader_lookup(sw_context->fp->shman,
+ cmd->body.type,
+ &shid);
+
+ ret = vmw_cmd_compat_res_check(dev_priv, sw_context,
+ vmw_res_shader,
+ user_shader_converter,
+ shid,
+ &cmd->body.shid, &res_node);
if (unlikely(ret != 0))
return ret;
@@ -1527,6 +1734,39 @@
}
/**
+ * vmw_cmd_set_shader_const - Validate an SVGA_3D_CMD_SET_SHADER_CONST
+ * command
+ *
+ * @dev_priv: Pointer to a device private struct.
+ * @sw_context: The software context being used for this batch.
+ * @header: Pointer to the command header in the command stream.
+ */
+static int vmw_cmd_set_shader_const(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGA3dCmdHeader *header)
+{
+ struct vmw_set_shader_const_cmd {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdSetShaderConst body;
+ } *cmd;
+ int ret;
+
+ cmd = container_of(header, struct vmw_set_shader_const_cmd,
+ header);
+
+ ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_context,
+ user_context_converter, &cmd->body.cid,
+ NULL);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (dev_priv->has_mob)
+ header->id = SVGA_3D_CMD_SET_GB_SHADERCONSTS_INLINE;
+
+ return 0;
+}
+
+/**
* vmw_cmd_bind_gb_shader - Validate an SVGA_3D_CMD_BIND_GB_SHADER
* command
*
@@ -1634,14 +1874,14 @@
true, false, false),
VMW_CMD_DEF(SVGA_3D_CMD_PRESENT, &vmw_cmd_present_check,
false, false, false),
- VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DEFINE, &vmw_cmd_cid_check,
- true, true, false),
- VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DESTROY, &vmw_cmd_cid_check,
- true, true, false),
+ VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DEFINE, &vmw_cmd_shader_define,
+ true, false, false),
+ VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DESTROY, &vmw_cmd_shader_destroy,
+ true, false, false),
VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER, &vmw_cmd_set_shader,
true, false, false),
- VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER_CONST, &vmw_cmd_cid_check,
- true, true, false),
+ VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER_CONST, &vmw_cmd_set_shader_const,
+ true, false, false),
VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw,
true, false, false),
VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check,
@@ -2171,7 +2411,7 @@
} else
sw_context->kernel = true;
- sw_context->tfile = vmw_fpriv(file_priv)->tfile;
+ sw_context->fp = vmw_fpriv(file_priv);
sw_context->cur_reloc = 0;
sw_context->cur_val_buf = 0;
sw_context->fence_flags = 0;
@@ -2188,16 +2428,17 @@
goto out_unlock;
sw_context->res_ht_initialized = true;
}
+ INIT_LIST_HEAD(&sw_context->staged_shaders);
INIT_LIST_HEAD(&resource_list);
ret = vmw_cmd_check_all(dev_priv, sw_context, kernel_commands,
command_size);
if (unlikely(ret != 0))
- goto out_err;
+ goto out_err_nores;
ret = vmw_resources_reserve(sw_context);
if (unlikely(ret != 0))
- goto out_err;
+ goto out_err_nores;
ret = ttm_eu_reserve_buffers(&ticket, &sw_context->validate_nodes);
if (unlikely(ret != 0))
@@ -2225,6 +2466,12 @@
goto out_err;
}
+ if (dev_priv->has_mob) {
+ ret = vmw_rebind_contexts(sw_context);
+ if (unlikely(ret != 0))
+ goto out_err;
+ }
+
cmd = vmw_fifo_reserve(dev_priv, command_size);
if (unlikely(cmd == NULL)) {
DRM_ERROR("Failed reserving fifo space for commands.\n");
@@ -2276,6 +2523,8 @@
}
list_splice_init(&sw_context->resource_list, &resource_list);
+ vmw_compat_shaders_commit(sw_context->fp->shman,
+ &sw_context->staged_shaders);
mutex_unlock(&dev_priv->cmdbuf_mutex);
/*
@@ -2289,10 +2538,11 @@
out_unlock_binding:
mutex_unlock(&dev_priv->binding_mutex);
out_err:
+ ttm_eu_backoff_reservation(&ticket, &sw_context->validate_nodes);
+out_err_nores:
+ vmw_resource_list_unreserve(&sw_context->resource_list, true);
vmw_resource_relocations_free(&sw_context->res_relocations);
vmw_free_relocations(sw_context);
- ttm_eu_backoff_reservation(&ticket, &sw_context->validate_nodes);
- vmw_resource_list_unreserve(&sw_context->resource_list, true);
vmw_clear_validations(sw_context);
if (unlikely(dev_priv->pinned_bo != NULL &&
!dev_priv->query_cid_valid))
@@ -2301,6 +2551,8 @@
list_splice_init(&sw_context->resource_list, &resource_list);
error_resource = sw_context->error_resource;
sw_context->error_resource = NULL;
+ vmw_compat_shaders_revert(sw_context->fp->shman,
+ &sw_context->staged_shaders);
mutex_unlock(&dev_priv->cmdbuf_mutex);
/*
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
index 116c497..f9881f9 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -29,12 +29,18 @@
#include <drm/vmwgfx_drm.h>
#include "vmwgfx_kms.h"
+struct svga_3d_compat_cap {
+ SVGA3dCapsRecordHeader header;
+ SVGA3dCapPair pairs[SVGA3D_DEVCAP_MAX];
+};
+
int vmw_getparam_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct vmw_private *dev_priv = vmw_priv(dev);
struct drm_vmw_getparam_arg *param =
(struct drm_vmw_getparam_arg *)data;
+ struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
switch (param->param) {
case DRM_VMW_PARAM_NUM_STREAMS:
@@ -60,6 +66,11 @@
__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
const struct vmw_fifo_state *fifo = &dev_priv->fifo;
+ if ((dev_priv->capabilities & SVGA_CAP_GBOBJECTS)) {
+ param->value = SVGA3D_HWVERSION_WS8_B1;
+ break;
+ }
+
param->value =
ioread32(fifo_mem +
((fifo->capabilities &
@@ -69,17 +80,26 @@
break;
}
case DRM_VMW_PARAM_MAX_SURF_MEMORY:
- param->value = dev_priv->memory_size;
+ if ((dev_priv->capabilities & SVGA_CAP_GBOBJECTS) &&
+ !vmw_fp->gb_aware)
+ param->value = dev_priv->max_mob_pages * PAGE_SIZE / 2;
+ else
+ param->value = dev_priv->memory_size;
break;
case DRM_VMW_PARAM_3D_CAPS_SIZE:
- if (dev_priv->capabilities & SVGA_CAP_GBOBJECTS)
- param->value = SVGA3D_DEVCAP_MAX;
+ if ((dev_priv->capabilities & SVGA_CAP_GBOBJECTS) &&
+ vmw_fp->gb_aware)
+ param->value = SVGA3D_DEVCAP_MAX * sizeof(uint32_t);
+ else if (dev_priv->capabilities & SVGA_CAP_GBOBJECTS)
+ param->value = sizeof(struct svga_3d_compat_cap) +
+ sizeof(uint32_t);
else
param->value = (SVGA_FIFO_3D_CAPS_LAST -
- SVGA_FIFO_3D_CAPS + 1);
- param->value *= sizeof(uint32_t);
+ SVGA_FIFO_3D_CAPS + 1) *
+ sizeof(uint32_t);
break;
case DRM_VMW_PARAM_MAX_MOB_MEMORY:
+ vmw_fp->gb_aware = true;
param->value = dev_priv->max_mob_pages * PAGE_SIZE;
break;
default:
@@ -91,6 +111,38 @@
return 0;
}
+static int vmw_fill_compat_cap(struct vmw_private *dev_priv, void *bounce,
+ size_t size)
+{
+ struct svga_3d_compat_cap *compat_cap =
+ (struct svga_3d_compat_cap *) bounce;
+ unsigned int i;
+ size_t pair_offset = offsetof(struct svga_3d_compat_cap, pairs);
+ unsigned int max_size;
+
+ if (size < pair_offset)
+ return -EINVAL;
+
+ max_size = (size - pair_offset) / sizeof(SVGA3dCapPair);
+
+ if (max_size > SVGA3D_DEVCAP_MAX)
+ max_size = SVGA3D_DEVCAP_MAX;
+
+ compat_cap->header.length =
+ (pair_offset + max_size * sizeof(SVGA3dCapPair)) / sizeof(u32);
+ compat_cap->header.type = SVGA3DCAPS_RECORD_DEVCAPS;
+
+ mutex_lock(&dev_priv->hw_mutex);
+ for (i = 0; i < max_size; ++i) {
+ vmw_write(dev_priv, SVGA_REG_DEV_CAP, i);
+ compat_cap->pairs[i][0] = i;
+ compat_cap->pairs[i][1] = vmw_read(dev_priv, SVGA_REG_DEV_CAP);
+ }
+ mutex_unlock(&dev_priv->hw_mutex);
+
+ return 0;
+}
+
int vmw_get_cap_3d_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
@@ -104,41 +156,49 @@
void *bounce;
int ret;
bool gb_objects = !!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS);
+ struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
if (unlikely(arg->pad64 != 0)) {
DRM_ERROR("Illegal GET_3D_CAP argument.\n");
return -EINVAL;
}
- if (gb_objects)
- size = SVGA3D_DEVCAP_MAX;
+ if (gb_objects && vmw_fp->gb_aware)
+ size = SVGA3D_DEVCAP_MAX * sizeof(uint32_t);
+ else if (gb_objects)
+ size = sizeof(struct svga_3d_compat_cap) + sizeof(uint32_t);
else
- size = (SVGA_FIFO_3D_CAPS_LAST - SVGA_FIFO_3D_CAPS + 1);
-
- size *= sizeof(uint32_t);
+ size = (SVGA_FIFO_3D_CAPS_LAST - SVGA_FIFO_3D_CAPS + 1) *
+ sizeof(uint32_t);
if (arg->max_size < size)
size = arg->max_size;
- bounce = vmalloc(size);
+ bounce = vzalloc(size);
if (unlikely(bounce == NULL)) {
DRM_ERROR("Failed to allocate bounce buffer for 3D caps.\n");
return -ENOMEM;
}
- if (gb_objects) {
- int i;
+ if (gb_objects && vmw_fp->gb_aware) {
+ int i, num;
uint32_t *bounce32 = (uint32_t *) bounce;
+ num = size / sizeof(uint32_t);
+ if (num > SVGA3D_DEVCAP_MAX)
+ num = SVGA3D_DEVCAP_MAX;
+
mutex_lock(&dev_priv->hw_mutex);
- for (i = 0; i < SVGA3D_DEVCAP_MAX; ++i) {
+ for (i = 0; i < num; ++i) {
vmw_write(dev_priv, SVGA_REG_DEV_CAP, i);
*bounce32++ = vmw_read(dev_priv, SVGA_REG_DEV_CAP);
}
mutex_unlock(&dev_priv->hw_mutex);
-
+ } else if (gb_objects) {
+ ret = vmw_fill_compat_cap(dev_priv, bounce, size);
+ if (unlikely(ret != 0))
+ goto out_err;
} else {
-
fifo_mem = dev_priv->mmio_virt;
memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size);
}
@@ -146,6 +206,7 @@
ret = copy_to_user(buffer, bounce, size);
if (ret)
ret = -EFAULT;
+out_err:
vfree(bounce);
if (unlikely(ret != 0))
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c
index 4910e7b..d4a5a19 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_mob.c
@@ -134,6 +134,7 @@
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
DRM_ERROR("Failed reserving FIFO space for OTable setup.\n");
+ ret = -ENOMEM;
goto out_no_fifo;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 6fdd82d..2aa4bc6 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -88,6 +88,11 @@
return res;
}
+struct vmw_resource *
+vmw_resource_reference_unless_doomed(struct vmw_resource *res)
+{
+ return kref_get_unless_zero(&res->kref) ? res : NULL;
+}
/**
* vmw_resource_release_id - release a resource id to the id manager.
@@ -136,8 +141,12 @@
vmw_dmabuf_unreference(&res->backup);
}
- if (likely(res->hw_destroy != NULL))
+ if (likely(res->hw_destroy != NULL)) {
res->hw_destroy(res);
+ mutex_lock(&dev_priv->binding_mutex);
+ vmw_context_binding_res_list_kill(&res->binding_head);
+ mutex_unlock(&dev_priv->binding_mutex);
+ }
id = res->id;
if (res->res_free != NULL)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c b/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c
index 1457ec4b..217d941 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_shader.c
@@ -29,6 +29,8 @@
#include "vmwgfx_resource_priv.h"
#include "ttm/ttm_placement.h"
+#define VMW_COMPAT_SHADER_HT_ORDER 12
+
struct vmw_shader {
struct vmw_resource res;
SVGA3dShaderType type;
@@ -40,6 +42,50 @@
struct vmw_shader shader;
};
+/**
+ * enum vmw_compat_shader_state - Staging state for compat shaders
+ */
+enum vmw_compat_shader_state {
+ VMW_COMPAT_COMMITED,
+ VMW_COMPAT_ADD,
+ VMW_COMPAT_DEL
+};
+
+/**
+ * struct vmw_compat_shader - Metadata for compat shaders.
+ *
+ * @handle: The TTM handle of the guest backed shader.
+ * @tfile: The struct ttm_object_file the guest backed shader is registered
+ * with.
+ * @hash: Hash item for lookup.
+ * @head: List head for staging lists or the compat shader manager list.
+ * @state: Staging state.
+ *
+ * The structure is protected by the cmdbuf lock.
+ */
+struct vmw_compat_shader {
+ u32 handle;
+ struct ttm_object_file *tfile;
+ struct drm_hash_item hash;
+ struct list_head head;
+ enum vmw_compat_shader_state state;
+};
+
+/**
+ * struct vmw_compat_shader_manager - Compat shader manager.
+ *
+ * @shaders: Hash table containing staged and commited compat shaders
+ * @list: List of commited shaders.
+ * @dev_priv: Pointer to a device private structure.
+ *
+ * @shaders and @list are protected by the cmdbuf mutex for now.
+ */
+struct vmw_compat_shader_manager {
+ struct drm_open_hash shaders;
+ struct list_head list;
+ struct vmw_private *dev_priv;
+};
+
static void vmw_user_shader_free(struct vmw_resource *res);
static struct vmw_resource *
vmw_user_shader_base_to_res(struct ttm_base_object *base);
@@ -258,7 +304,7 @@
return 0;
mutex_lock(&dev_priv->binding_mutex);
- vmw_context_binding_res_list_kill(&res->binding_head);
+ vmw_context_binding_res_list_scrub(&res->binding_head);
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
@@ -325,13 +371,81 @@
TTM_REF_USAGE);
}
+int vmw_shader_alloc(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buffer,
+ size_t shader_size,
+ size_t offset,
+ SVGA3dShaderType shader_type,
+ struct ttm_object_file *tfile,
+ u32 *handle)
+{
+ struct vmw_user_shader *ushader;
+ struct vmw_resource *res, *tmp;
+ int ret;
+
+ /*
+ * Approximate idr memory usage with 128 bytes. It will be limited
+ * by maximum number_of shaders anyway.
+ */
+ if (unlikely(vmw_user_shader_size == 0))
+ vmw_user_shader_size =
+ ttm_round_pot(sizeof(struct vmw_user_shader)) + 128;
+
+ ret = ttm_mem_global_alloc(vmw_mem_glob(dev_priv),
+ vmw_user_shader_size,
+ false, true);
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Out of graphics memory for shader "
+ "creation.\n");
+ goto out;
+ }
+
+ ushader = kzalloc(sizeof(*ushader), GFP_KERNEL);
+ if (unlikely(ushader == NULL)) {
+ ttm_mem_global_free(vmw_mem_glob(dev_priv),
+ vmw_user_shader_size);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ res = &ushader->shader.res;
+ ushader->base.shareable = false;
+ ushader->base.tfile = NULL;
+
+ /*
+ * From here on, the destructor takes over resource freeing.
+ */
+
+ ret = vmw_gb_shader_init(dev_priv, res, shader_size,
+ offset, shader_type, buffer,
+ vmw_user_shader_free);
+ if (unlikely(ret != 0))
+ goto out;
+
+ tmp = vmw_resource_reference(res);
+ ret = ttm_base_object_init(tfile, &ushader->base, false,
+ VMW_RES_SHADER,
+ &vmw_user_shader_base_release, NULL);
+
+ if (unlikely(ret != 0)) {
+ vmw_resource_unreference(&tmp);
+ goto out_err;
+ }
+
+ if (handle)
+ *handle = ushader->base.hash.key;
+out_err:
+ vmw_resource_unreference(&res);
+out:
+ return ret;
+}
+
+
int vmw_shader_define_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct vmw_private *dev_priv = vmw_priv(dev);
- struct vmw_user_shader *ushader;
- struct vmw_resource *res;
- struct vmw_resource *tmp;
struct drm_vmw_shader_create_arg *arg =
(struct drm_vmw_shader_create_arg *)data;
struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
@@ -373,69 +487,324 @@
goto out_bad_arg;
}
- /*
- * Approximate idr memory usage with 128 bytes. It will be limited
- * by maximum number_of shaders anyway.
- */
-
- if (unlikely(vmw_user_shader_size == 0))
- vmw_user_shader_size = ttm_round_pot(sizeof(*ushader))
- + 128;
-
ret = ttm_read_lock(&vmaster->lock, true);
if (unlikely(ret != 0))
- return ret;
+ goto out_bad_arg;
- ret = ttm_mem_global_alloc(vmw_mem_glob(dev_priv),
- vmw_user_shader_size,
- false, true);
- if (unlikely(ret != 0)) {
- if (ret != -ERESTARTSYS)
- DRM_ERROR("Out of graphics memory for shader"
- " creation.\n");
- goto out_unlock;
- }
+ ret = vmw_shader_alloc(dev_priv, buffer, arg->size, arg->offset,
+ shader_type, tfile, &arg->shader_handle);
- ushader = kzalloc(sizeof(*ushader), GFP_KERNEL);
- if (unlikely(ushader == NULL)) {
- ttm_mem_global_free(vmw_mem_glob(dev_priv),
- vmw_user_shader_size);
- ret = -ENOMEM;
- goto out_unlock;
- }
-
- res = &ushader->shader.res;
- ushader->base.shareable = false;
- ushader->base.tfile = NULL;
-
- /*
- * From here on, the destructor takes over resource freeing.
- */
-
- ret = vmw_gb_shader_init(dev_priv, res, arg->size,
- arg->offset, shader_type, buffer,
- vmw_user_shader_free);
- if (unlikely(ret != 0))
- goto out_unlock;
-
- tmp = vmw_resource_reference(res);
- ret = ttm_base_object_init(tfile, &ushader->base, false,
- VMW_RES_SHADER,
- &vmw_user_shader_base_release, NULL);
-
- if (unlikely(ret != 0)) {
- vmw_resource_unreference(&tmp);
- goto out_err;
- }
-
- arg->shader_handle = ushader->base.hash.key;
-out_err:
- vmw_resource_unreference(&res);
-out_unlock:
ttm_read_unlock(&vmaster->lock);
out_bad_arg:
vmw_dmabuf_unreference(&buffer);
-
return ret;
+}
+/**
+ * vmw_compat_shader_lookup - Look up a compat shader
+ *
+ * @man: Pointer to the compat shader manager.
+ * @shader_type: The shader type, that combined with the user_key identifies
+ * the shader.
+ * @user_key: On entry, this should be a pointer to the user_key.
+ * On successful exit, it will contain the guest-backed shader's TTM handle.
+ *
+ * Returns 0 on success. Non-zero on failure, in which case the value pointed
+ * to by @user_key is unmodified.
+ */
+int vmw_compat_shader_lookup(struct vmw_compat_shader_manager *man,
+ SVGA3dShaderType shader_type,
+ u32 *user_key)
+{
+ struct drm_hash_item *hash;
+ int ret;
+ unsigned long key = *user_key | (shader_type << 24);
+
+ ret = drm_ht_find_item(&man->shaders, key, &hash);
+ if (unlikely(ret != 0))
+ return ret;
+
+ *user_key = drm_hash_entry(hash, struct vmw_compat_shader,
+ hash)->handle;
+
+ return 0;
+}
+
+/**
+ * vmw_compat_shader_free - Free a compat shader.
+ *
+ * @man: Pointer to the compat shader manager.
+ * @entry: Pointer to a struct vmw_compat_shader.
+ *
+ * Frees a struct vmw_compat_shder entry and drops its reference to the
+ * guest backed shader.
+ */
+static void vmw_compat_shader_free(struct vmw_compat_shader_manager *man,
+ struct vmw_compat_shader *entry)
+{
+ list_del(&entry->head);
+ WARN_ON(drm_ht_remove_item(&man->shaders, &entry->hash));
+ WARN_ON(ttm_ref_object_base_unref(entry->tfile, entry->handle,
+ TTM_REF_USAGE));
+ kfree(entry);
+}
+
+/**
+ * vmw_compat_shaders_commit - Commit a list of compat shader actions.
+ *
+ * @man: Pointer to the compat shader manager.
+ * @list: Caller's list of compat shader actions.
+ *
+ * This function commits a list of compat shader additions or removals.
+ * It is typically called when the execbuf ioctl call triggering these
+ * actions has commited the fifo contents to the device.
+ */
+void vmw_compat_shaders_commit(struct vmw_compat_shader_manager *man,
+ struct list_head *list)
+{
+ struct vmw_compat_shader *entry, *next;
+
+ list_for_each_entry_safe(entry, next, list, head) {
+ list_del(&entry->head);
+ switch (entry->state) {
+ case VMW_COMPAT_ADD:
+ entry->state = VMW_COMPAT_COMMITED;
+ list_add_tail(&entry->head, &man->list);
+ break;
+ case VMW_COMPAT_DEL:
+ ttm_ref_object_base_unref(entry->tfile, entry->handle,
+ TTM_REF_USAGE);
+ kfree(entry);
+ break;
+ default:
+ BUG();
+ break;
+ }
+ }
+}
+
+/**
+ * vmw_compat_shaders_revert - Revert a list of compat shader actions
+ *
+ * @man: Pointer to the compat shader manager.
+ * @list: Caller's list of compat shader actions.
+ *
+ * This function reverts a list of compat shader additions or removals.
+ * It is typically called when the execbuf ioctl call triggering these
+ * actions failed for some reason, and the command stream was never
+ * submitted.
+ */
+void vmw_compat_shaders_revert(struct vmw_compat_shader_manager *man,
+ struct list_head *list)
+{
+ struct vmw_compat_shader *entry, *next;
+ int ret;
+
+ list_for_each_entry_safe(entry, next, list, head) {
+ switch (entry->state) {
+ case VMW_COMPAT_ADD:
+ vmw_compat_shader_free(man, entry);
+ break;
+ case VMW_COMPAT_DEL:
+ ret = drm_ht_insert_item(&man->shaders, &entry->hash);
+ list_del(&entry->head);
+ list_add_tail(&entry->head, &man->list);
+ entry->state = VMW_COMPAT_COMMITED;
+ break;
+ default:
+ BUG();
+ break;
+ }
+ }
+}
+
+/**
+ * vmw_compat_shader_remove - Stage a compat shader for removal.
+ *
+ * @man: Pointer to the compat shader manager
+ * @user_key: The key that is used to identify the shader. The key is
+ * unique to the shader type.
+ * @shader_type: Shader type.
+ * @list: Caller's list of staged shader actions.
+ *
+ * This function stages a compat shader for removal and removes the key from
+ * the shader manager's hash table. If the shader was previously only staged
+ * for addition it is completely removed (But the execbuf code may keep a
+ * reference if it was bound to a context between addition and removal). If
+ * it was previously commited to the manager, it is staged for removal.
+ */
+int vmw_compat_shader_remove(struct vmw_compat_shader_manager *man,
+ u32 user_key, SVGA3dShaderType shader_type,
+ struct list_head *list)
+{
+ struct vmw_compat_shader *entry;
+ struct drm_hash_item *hash;
+ int ret;
+
+ ret = drm_ht_find_item(&man->shaders, user_key | (shader_type << 24),
+ &hash);
+ if (likely(ret != 0))
+ return -EINVAL;
+
+ entry = drm_hash_entry(hash, struct vmw_compat_shader, hash);
+
+ switch (entry->state) {
+ case VMW_COMPAT_ADD:
+ vmw_compat_shader_free(man, entry);
+ break;
+ case VMW_COMPAT_COMMITED:
+ (void) drm_ht_remove_item(&man->shaders, &entry->hash);
+ list_del(&entry->head);
+ entry->state = VMW_COMPAT_DEL;
+ list_add_tail(&entry->head, list);
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * vmw_compat_shader_add - Create a compat shader and add the
+ * key to the manager
+ *
+ * @man: Pointer to the compat shader manager
+ * @user_key: The key that is used to identify the shader. The key is
+ * unique to the shader type.
+ * @bytecode: Pointer to the bytecode of the shader.
+ * @shader_type: Shader type.
+ * @tfile: Pointer to a struct ttm_object_file that the guest-backed shader is
+ * to be created with.
+ * @list: Caller's list of staged shader actions.
+ *
+ * Note that only the key is added to the shader manager's hash table.
+ * The shader is not yet added to the shader manager's list of shaders.
+ */
+int vmw_compat_shader_add(struct vmw_compat_shader_manager *man,
+ u32 user_key, const void *bytecode,
+ SVGA3dShaderType shader_type,
+ size_t size,
+ struct ttm_object_file *tfile,
+ struct list_head *list)
+{
+ struct vmw_dma_buffer *buf;
+ struct ttm_bo_kmap_obj map;
+ bool is_iomem;
+ struct vmw_compat_shader *compat;
+ u32 handle;
+ int ret;
+
+ if (user_key > ((1 << 24) - 1) || (unsigned) shader_type > 16)
+ return -EINVAL;
+
+ /* Allocate and pin a DMA buffer */
+ buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+ if (unlikely(buf == NULL))
+ return -ENOMEM;
+
+ ret = vmw_dmabuf_init(man->dev_priv, buf, size, &vmw_sys_ne_placement,
+ true, vmw_dmabuf_bo_free);
+ if (unlikely(ret != 0))
+ goto out;
+
+ ret = ttm_bo_reserve(&buf->base, false, true, false, NULL);
+ if (unlikely(ret != 0))
+ goto no_reserve;
+
+ /* Map and copy shader bytecode. */
+ ret = ttm_bo_kmap(&buf->base, 0, PAGE_ALIGN(size) >> PAGE_SHIFT,
+ &map);
+ if (unlikely(ret != 0)) {
+ ttm_bo_unreserve(&buf->base);
+ goto no_reserve;
+ }
+
+ memcpy(ttm_kmap_obj_virtual(&map, &is_iomem), bytecode, size);
+ WARN_ON(is_iomem);
+
+ ttm_bo_kunmap(&map);
+ ret = ttm_bo_validate(&buf->base, &vmw_sys_placement, false, true);
+ WARN_ON(ret != 0);
+ ttm_bo_unreserve(&buf->base);
+
+ /* Create a guest-backed shader container backed by the dma buffer */
+ ret = vmw_shader_alloc(man->dev_priv, buf, size, 0, shader_type,
+ tfile, &handle);
+ vmw_dmabuf_unreference(&buf);
+ if (unlikely(ret != 0))
+ goto no_reserve;
+ /*
+ * Create a compat shader structure and stage it for insertion
+ * in the manager
+ */
+ compat = kzalloc(sizeof(*compat), GFP_KERNEL);
+ if (compat == NULL)
+ goto no_compat;
+
+ compat->hash.key = user_key | (shader_type << 24);
+ ret = drm_ht_insert_item(&man->shaders, &compat->hash);
+ if (unlikely(ret != 0))
+ goto out_invalid_key;
+
+ compat->state = VMW_COMPAT_ADD;
+ compat->handle = handle;
+ compat->tfile = tfile;
+ list_add_tail(&compat->head, list);
+
+ return 0;
+
+out_invalid_key:
+ kfree(compat);
+no_compat:
+ ttm_ref_object_base_unref(tfile, handle, TTM_REF_USAGE);
+no_reserve:
+out:
+ return ret;
+}
+
+/**
+ * vmw_compat_shader_man_create - Create a compat shader manager
+ *
+ * @dev_priv: Pointer to a device private structure.
+ *
+ * Typically done at file open time. If successful returns a pointer to a
+ * compat shader manager. Otherwise returns an error pointer.
+ */
+struct vmw_compat_shader_manager *
+vmw_compat_shader_man_create(struct vmw_private *dev_priv)
+{
+ struct vmw_compat_shader_manager *man;
+ int ret;
+
+ man = kzalloc(sizeof(*man), GFP_KERNEL);
+
+ man->dev_priv = dev_priv;
+ INIT_LIST_HEAD(&man->list);
+ ret = drm_ht_create(&man->shaders, VMW_COMPAT_SHADER_HT_ORDER);
+ if (ret == 0)
+ return man;
+
+ kfree(man);
+ return ERR_PTR(ret);
+}
+
+/**
+ * vmw_compat_shader_man_destroy - Destroy a compat shader manager
+ *
+ * @man: Pointer to the shader manager to destroy.
+ *
+ * Typically done at file close time.
+ */
+void vmw_compat_shader_man_destroy(struct vmw_compat_shader_manager *man)
+{
+ struct vmw_compat_shader *entry, *next;
+
+ mutex_lock(&man->dev_priv->cmdbuf_mutex);
+ list_for_each_entry_safe(entry, next, &man->list, head)
+ vmw_compat_shader_free(man, entry);
+
+ mutex_unlock(&man->dev_priv->cmdbuf_mutex);
+ kfree(man);
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
index 979da1c..82468d9 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -908,8 +908,8 @@
rep->size_addr;
if (user_sizes)
- ret = copy_to_user(user_sizes, srf->sizes,
- srf->num_sizes * sizeof(*srf->sizes));
+ ret = copy_to_user(user_sizes, &srf->base_size,
+ sizeof(srf->base_size));
if (unlikely(ret != 0)) {
DRM_ERROR("copy_to_user failed %p %u\n",
user_sizes, srf->num_sizes);
@@ -1111,7 +1111,7 @@
return 0;
mutex_lock(&dev_priv->binding_mutex);
- vmw_context_binding_res_list_kill(&res->binding_head);
+ vmw_context_binding_res_list_scrub(&res->binding_head);
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index af6edf9..f2d7bf9 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -67,7 +67,6 @@
int ret = 0;
struct vmbus_channel_initiate_contact *msg;
unsigned long flags;
- int t;
init_completion(&msginfo->waitevent);
@@ -78,6 +77,8 @@
msg->interrupt_page = virt_to_phys(vmbus_connection.int_page);
msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages[0]);
msg->monitor_page2 = virt_to_phys(vmbus_connection.monitor_pages[1]);
+ if (version == VERSION_WIN8)
+ msg->target_vcpu = hv_context.vp_index[smp_processor_id()];
/*
* Add to list before we send the request since we may
@@ -100,15 +101,7 @@
}
/* Wait for the connection response */
- t = wait_for_completion_timeout(&msginfo->waitevent, 5*HZ);
- if (t == 0) {
- spin_lock_irqsave(&vmbus_connection.channelmsg_lock,
- flags);
- list_del(&msginfo->msglistentry);
- spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock,
- flags);
- return -ETIMEDOUT;
- }
+ wait_for_completion(&msginfo->waitevent);
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_del(&msginfo->msglistentry);
diff --git a/drivers/hwmon/da9055-hwmon.c b/drivers/hwmon/da9055-hwmon.c
index 029ecab..73b3865 100644
--- a/drivers/hwmon/da9055-hwmon.c
+++ b/drivers/hwmon/da9055-hwmon.c
@@ -278,10 +278,6 @@
if (hwmon_irq < 0)
return hwmon_irq;
- hwmon_irq = regmap_irq_get_virq(hwmon->da9055->irq_data, hwmon_irq);
- if (hwmon_irq < 0)
- return hwmon_irq;
-
ret = devm_request_threaded_irq(&pdev->dev, hwmon_irq,
NULL, da9055_auxadc_irq,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index 8c232039..8a17f01 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -145,7 +145,7 @@
static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
{
struct iio_channel *channel = pdata->chan;
- unsigned int result;
+ s64 result;
int val, ret;
ret = iio_read_channel_raw(channel, &val);
@@ -155,10 +155,10 @@
}
/* unit: mV */
- result = pdata->pullup_uv * val;
+ result = pdata->pullup_uv * (s64) val;
result >>= 12;
- return result;
+ return (int)result;
}
static const struct of_device_id ntc_match[] = {
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 3cbf66e..291d11f 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -90,7 +90,8 @@
u32 flags; /* from platform data */
- int exponent; /* linear mode: exponent for output voltages */
+ int exponent[PMBUS_PAGES];
+ /* linear mode: exponent for output voltages */
const struct pmbus_driver_info *info;
@@ -410,7 +411,7 @@
long val;
if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */
- exponent = data->exponent;
+ exponent = data->exponent[sensor->page];
mantissa = (u16) sensor->data;
} else { /* LINEAR11 */
exponent = ((s16)sensor->data) >> 11;
@@ -516,7 +517,7 @@
#define MIN_MANTISSA (511 * 1000)
static u16 pmbus_data2reg_linear(struct pmbus_data *data,
- enum pmbus_sensor_classes class, long val)
+ struct pmbus_sensor *sensor, long val)
{
s16 exponent = 0, mantissa;
bool negative = false;
@@ -525,7 +526,7 @@
if (val == 0)
return 0;
- if (class == PSC_VOLTAGE_OUT) {
+ if (sensor->class == PSC_VOLTAGE_OUT) {
/* LINEAR16 does not support negative voltages */
if (val < 0)
return 0;
@@ -534,10 +535,10 @@
* For a static exponents, we don't have a choice
* but to adjust the value to it.
*/
- if (data->exponent < 0)
- val <<= -data->exponent;
+ if (data->exponent[sensor->page] < 0)
+ val <<= -data->exponent[sensor->page];
else
- val >>= data->exponent;
+ val >>= data->exponent[sensor->page];
val = DIV_ROUND_CLOSEST(val, 1000);
return val & 0xffff;
}
@@ -548,14 +549,14 @@
}
/* Power is in uW. Convert to mW before converting. */
- if (class == PSC_POWER)
+ if (sensor->class == PSC_POWER)
val = DIV_ROUND_CLOSEST(val, 1000L);
/*
* For simplicity, convert fan data to milli-units
* before calculating the exponent.
*/
- if (class == PSC_FAN)
+ if (sensor->class == PSC_FAN)
val = val * 1000;
/* Reduce large mantissa until it fits into 10 bit */
@@ -585,22 +586,22 @@
}
static u16 pmbus_data2reg_direct(struct pmbus_data *data,
- enum pmbus_sensor_classes class, long val)
+ struct pmbus_sensor *sensor, long val)
{
long m, b, R;
- m = data->info->m[class];
- b = data->info->b[class];
- R = data->info->R[class];
+ m = data->info->m[sensor->class];
+ b = data->info->b[sensor->class];
+ R = data->info->R[sensor->class];
/* Power is in uW. Adjust R and b. */
- if (class == PSC_POWER) {
+ if (sensor->class == PSC_POWER) {
R -= 3;
b *= 1000;
}
/* Calculate Y = (m * X + b) * 10^R */
- if (class != PSC_FAN) {
+ if (sensor->class != PSC_FAN) {
R -= 3; /* Adjust R and b for data in milli-units */
b *= 1000;
}
@@ -619,7 +620,7 @@
}
static u16 pmbus_data2reg_vid(struct pmbus_data *data,
- enum pmbus_sensor_classes class, long val)
+ struct pmbus_sensor *sensor, long val)
{
val = clamp_val(val, 500, 1600);
@@ -627,20 +628,20 @@
}
static u16 pmbus_data2reg(struct pmbus_data *data,
- enum pmbus_sensor_classes class, long val)
+ struct pmbus_sensor *sensor, long val)
{
u16 regval;
- switch (data->info->format[class]) {
+ switch (data->info->format[sensor->class]) {
case direct:
- regval = pmbus_data2reg_direct(data, class, val);
+ regval = pmbus_data2reg_direct(data, sensor, val);
break;
case vid:
- regval = pmbus_data2reg_vid(data, class, val);
+ regval = pmbus_data2reg_vid(data, sensor, val);
break;
case linear:
default:
- regval = pmbus_data2reg_linear(data, class, val);
+ regval = pmbus_data2reg_linear(data, sensor, val);
break;
}
return regval;
@@ -746,7 +747,7 @@
return -EINVAL;
mutex_lock(&data->update_lock);
- regval = pmbus_data2reg(data, sensor->class, val);
+ regval = pmbus_data2reg(data, sensor, val);
ret = _pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
if (ret < 0)
rv = ret;
@@ -1643,12 +1644,13 @@
* This function is called for all chips.
*/
static int pmbus_identify_common(struct i2c_client *client,
- struct pmbus_data *data)
+ struct pmbus_data *data, int page)
{
int vout_mode = -1;
- if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE))
- vout_mode = _pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+ if (pmbus_check_byte_register(client, page, PMBUS_VOUT_MODE))
+ vout_mode = _pmbus_read_byte_data(client, page,
+ PMBUS_VOUT_MODE);
if (vout_mode >= 0 && vout_mode != 0xff) {
/*
* Not all chips support the VOUT_MODE command,
@@ -1659,7 +1661,7 @@
if (data->info->format[PSC_VOLTAGE_OUT] != linear)
return -ENODEV;
- data->exponent = ((s8)(vout_mode << 3)) >> 3;
+ data->exponent[page] = ((s8)(vout_mode << 3)) >> 3;
break;
case 1: /* VID mode */
if (data->info->format[PSC_VOLTAGE_OUT] != vid)
@@ -1674,7 +1676,7 @@
}
}
- pmbus_clear_fault_page(client, 0);
+ pmbus_clear_fault_page(client, page);
return 0;
}
@@ -1682,7 +1684,7 @@
struct pmbus_driver_info *info)
{
struct device *dev = &client->dev;
- int ret;
+ int page, ret;
/*
* Some PMBus chips don't support PMBUS_STATUS_BYTE, so try
@@ -1715,10 +1717,12 @@
return -ENODEV;
}
- ret = pmbus_identify_common(client, data);
- if (ret < 0) {
- dev_err(dev, "Failed to identify chip capabilities\n");
- return ret;
+ for (page = 0; page < info->pages; page++) {
+ ret = pmbus_identify_common(client, data, page);
+ if (ret < 0) {
+ dev_err(dev, "Failed to identify chip capabilities\n");
+ return ret;
+ }
}
return 0;
}
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index b8c5187..d52d849 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -97,7 +97,6 @@
enum {
MV64XXX_I2C_ACTION_INVALID,
MV64XXX_I2C_ACTION_CONTINUE,
- MV64XXX_I2C_ACTION_OFFLOAD_SEND_START,
MV64XXX_I2C_ACTION_SEND_START,
MV64XXX_I2C_ACTION_SEND_RESTART,
MV64XXX_I2C_ACTION_OFFLOAD_RESTART,
@@ -204,6 +203,9 @@
unsigned long ctrl_reg;
struct i2c_msg *msg = drv_data->msgs;
+ if (!drv_data->offload_enabled)
+ return -EOPNOTSUPP;
+
drv_data->msg = msg;
drv_data->byte_posn = 0;
drv_data->bytes_left = msg->len;
@@ -433,8 +435,7 @@
drv_data->msgs++;
drv_data->num_msgs--;
- if (!(drv_data->offload_enabled &&
- mv64xxx_i2c_offload_msg(drv_data))) {
+ if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
writel(drv_data->cntl_bits,
drv_data->reg_base + drv_data->reg_offsets.control);
@@ -458,15 +459,14 @@
drv_data->reg_base + drv_data->reg_offsets.control);
break;
- case MV64XXX_I2C_ACTION_OFFLOAD_SEND_START:
- if (!mv64xxx_i2c_offload_msg(drv_data))
- break;
- else
- drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
- /* FALLTHRU */
case MV64XXX_I2C_ACTION_SEND_START:
- writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
- drv_data->reg_base + drv_data->reg_offsets.control);
+ /* Can we offload this msg ? */
+ if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
+ /* No, switch to standard path */
+ mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+ writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
+ drv_data->reg_base + drv_data->reg_offsets.control);
+ }
break;
case MV64XXX_I2C_ACTION_SEND_ADDR_1:
@@ -625,15 +625,10 @@
unsigned long flags;
spin_lock_irqsave(&drv_data->lock, flags);
- if (drv_data->offload_enabled) {
- drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_START;
- drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
- } else {
- mv64xxx_i2c_prepare_for_io(drv_data, msg);
- drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
- drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
- }
+ drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+ drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+
drv_data->send_stop = is_last;
drv_data->block = 1;
mv64xxx_i2c_do_action(drv_data);
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 3bec922..bfec313 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -447,14 +447,14 @@
{ },
};
-#define BMA180_CHANNEL(_index) { \
+#define BMA180_CHANNEL(_axis) { \
.type = IIO_ACCEL, \
- .indexed = 1, \
- .channel = (_index), \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
- .scan_index = (_index), \
+ .scan_index = AXIS_##_axis, \
.scan_type = { \
.sign = 's', \
.realbits = 14, \
@@ -465,10 +465,10 @@
}
static const struct iio_chan_spec bma180_channels[] = {
- BMA180_CHANNEL(AXIS_X),
- BMA180_CHANNEL(AXIS_Y),
- BMA180_CHANNEL(AXIS_Z),
- IIO_CHAN_SOFT_TIMESTAMP(4),
+ BMA180_CHANNEL(X),
+ BMA180_CHANNEL(Y),
+ BMA180_CHANNEL(Z),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
};
static irqreturn_t bma180_trigger_handler(int irq, void *p)
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index e283f2f..3602592 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -1560,7 +1560,7 @@
st->client = client;
st->vref_uv = st->chip_info->int_vref_mv * 1000;
- vref = devm_regulator_get(&client->dev, "vref");
+ vref = devm_regulator_get_optional(&client->dev, "vref");
if (!IS_ERR(vref)) {
int vref_uv;
diff --git a/drivers/iio/imu/adis16400.h b/drivers/iio/imu/adis16400.h
index 2f8f9d6..0916bf6 100644
--- a/drivers/iio/imu/adis16400.h
+++ b/drivers/iio/imu/adis16400.h
@@ -189,6 +189,7 @@
ADIS16300_SCAN_INCLI_X,
ADIS16300_SCAN_INCLI_Y,
ADIS16400_SCAN_ADC,
+ ADIS16400_SCAN_TIMESTAMP,
};
#ifdef CONFIG_IIO_BUFFER
diff --git a/drivers/iio/imu/adis16400_core.c b/drivers/iio/imu/adis16400_core.c
index 368660d..7c582f7 100644
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -632,7 +632,7 @@
ADIS16400_MAGN_CHAN(Z, ADIS16400_ZMAGN_OUT, 14),
ADIS16400_TEMP_CHAN(ADIS16400_TEMP_OUT, 12),
ADIS16400_AUX_ADC_CHAN(ADIS16400_AUX_ADC, 12),
- IIO_CHAN_SOFT_TIMESTAMP(12)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static const struct iio_chan_spec adis16448_channels[] = {
@@ -659,7 +659,7 @@
},
},
ADIS16400_TEMP_CHAN(ADIS16448_TEMP_OUT, 12),
- IIO_CHAN_SOFT_TIMESTAMP(11)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static const struct iio_chan_spec adis16350_channels[] = {
@@ -677,7 +677,7 @@
ADIS16400_MOD_TEMP_CHAN(X, ADIS16350_XTEMP_OUT, 12),
ADIS16400_MOD_TEMP_CHAN(Y, ADIS16350_YTEMP_OUT, 12),
ADIS16400_MOD_TEMP_CHAN(Z, ADIS16350_ZTEMP_OUT, 12),
- IIO_CHAN_SOFT_TIMESTAMP(11)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static const struct iio_chan_spec adis16300_channels[] = {
@@ -690,7 +690,7 @@
ADIS16400_AUX_ADC_CHAN(ADIS16300_AUX_ADC, 12),
ADIS16400_INCLI_CHAN(X, ADIS16300_PITCH_OUT, 13),
ADIS16400_INCLI_CHAN(Y, ADIS16300_ROLL_OUT, 13),
- IIO_CHAN_SOFT_TIMESTAMP(14)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static const struct iio_chan_spec adis16334_channels[] = {
@@ -701,7 +701,7 @@
ADIS16400_ACCEL_CHAN(Y, ADIS16400_YACCL_OUT, 14),
ADIS16400_ACCEL_CHAN(Z, ADIS16400_ZACCL_OUT, 14),
ADIS16400_TEMP_CHAN(ADIS16350_XTEMP_OUT, 12),
- IIO_CHAN_SOFT_TIMESTAMP(8)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static struct attribute *adis16400_attributes[] = {
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index 3d81101..94daa9f 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -460,10 +460,14 @@
{
struct tsl2563_chip *chip = iio_priv(indio_dev);
- if (chan->channel == IIO_MOD_LIGHT_BOTH)
+ if (mask != IIO_CHAN_INFO_CALIBSCALE)
+ return -EINVAL;
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
chip->calib0 = calib_from_sysfs(val);
- else
+ else if (chan->channel2 == IIO_MOD_LIGHT_IR)
chip->calib1 = calib_from_sysfs(val);
+ else
+ return -EINVAL;
return 0;
}
@@ -472,14 +476,14 @@
struct iio_chan_spec const *chan,
int *val,
int *val2,
- long m)
+ long mask)
{
int ret = -EINVAL;
u32 calib0, calib1;
struct tsl2563_chip *chip = iio_priv(indio_dev);
mutex_lock(&chip->lock);
- switch (m) {
+ switch (mask) {
case IIO_CHAN_INFO_RAW:
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
@@ -498,7 +502,7 @@
ret = tsl2563_get_adc(chip);
if (ret)
goto error_ret;
- if (chan->channel == 0)
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
*val = chip->data0;
else
*val = chip->data1;
@@ -510,7 +514,7 @@
break;
case IIO_CHAN_INFO_CALIBSCALE:
- if (chan->channel == 0)
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
*val = calib_to_sysfs(chip->calib0);
else
*val = calib_to_sysfs(chip->calib1);
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index ff284e5..0542354 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -85,6 +85,7 @@
#define AK8975_MAX_CONVERSION_TIMEOUT 500
#define AK8975_CONVERSION_DONE_POLL_TIME 10
#define AK8975_DATA_READY_TIMEOUT ((100*HZ)/1000)
+#define RAW_TO_GAUSS(asa) ((((asa) + 128) * 3000) / 256)
/*
* Per-instance context data for the device.
@@ -265,15 +266,15 @@
*
* Since 1uT = 0.01 gauss, our final scale factor becomes:
*
- * Hadj = H * ((ASA + 128) / 256) * 3/10 * 100
- * Hadj = H * ((ASA + 128) * 30 / 256
+ * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
+ * Hadj = H * ((ASA + 128) * 0.003) / 256
*
* Since ASA doesn't change, we cache the resultant scale factor into the
* device context in ak8975_setup().
*/
- data->raw_to_gauss[0] = ((data->asa[0] + 128) * 30) >> 8;
- data->raw_to_gauss[1] = ((data->asa[1] + 128) * 30) >> 8;
- data->raw_to_gauss[2] = ((data->asa[2] + 128) * 30) >> 8;
+ data->raw_to_gauss[0] = RAW_TO_GAUSS(data->asa[0]);
+ data->raw_to_gauss[1] = RAW_TO_GAUSS(data->asa[1]);
+ data->raw_to_gauss[2] = RAW_TO_GAUSS(data->asa[2]);
return 0;
}
@@ -428,8 +429,9 @@
case IIO_CHAN_INFO_RAW:
return ak8975_read_axis(indio_dev, chan->address, val);
case IIO_CHAN_INFO_SCALE:
- *val = data->raw_to_gauss[chan->address];
- return IIO_VAL_INT;
+ *val = 0;
+ *val2 = data->raw_to_gauss[chan->address];
+ return IIO_VAL_INT_PLUS_MICRO;
}
return -EINVAL;
}
diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index 4b65b6d..f66955f 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -106,7 +106,7 @@
while (n-- > 0)
len += scnprintf(buf + len, PAGE_SIZE - len,
- "%d.%d ", vals[n][0], vals[n][1]);
+ "%d.%06d ", vals[n][0], vals[n][1]);
/* replace trailing space by newline */
buf[len - 1] = '\n';
@@ -154,6 +154,9 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
switch (chan->type) {
case IIO_MAGN: /* in 0.1 uT / LSB */
ret = mag3110_read(data, buffer);
@@ -199,6 +202,9 @@
struct mag3110_data *data = iio_priv(indio_dev);
int rate;
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
rate = mag3110_get_samp_freq_index(data, val, val2);
diff --git a/drivers/infiniband/hw/amso1100/c2.c b/drivers/infiniband/hw/amso1100/c2.c
index d53cf51..00400c3 100644
--- a/drivers/infiniband/hw/amso1100/c2.c
+++ b/drivers/infiniband/hw/amso1100/c2.c
@@ -1082,6 +1082,7 @@
/* Initialize network device */
if ((netdev = c2_devinit(c2dev, mmio_regs)) == NULL) {
+ ret = -ENOMEM;
iounmap(mmio_regs);
goto bail4;
}
@@ -1151,7 +1152,8 @@
goto bail10;
}
- if (c2_register_device(c2dev))
+ ret = c2_register_device(c2dev);
+ if (ret)
goto bail10;
return 0;
diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c
index b7c9869..d2a6d96 100644
--- a/drivers/infiniband/hw/amso1100/c2_rnic.c
+++ b/drivers/infiniband/hw/amso1100/c2_rnic.c
@@ -576,7 +576,8 @@
goto bail4;
/* Initialize cached the adapter limits */
- if (c2_rnic_query(c2dev, &c2dev->props))
+ err = c2_rnic_query(c2dev, &c2dev->props);
+ if (err)
goto bail5;
/* Initialize the PD pool */
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 4512687..d286bde 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -3352,6 +3352,7 @@
goto free_dst;
}
+ neigh_release(neigh);
step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
rss_qid = dev->rdev.lldi.rxq_ids[pi->port_id * step];
window = (__force u16) htons((__force u16)tcph->window);
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index c2702f5..e81c554 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -347,7 +347,7 @@
props->active_width = (((u8 *)mailbox->buf)[5] == 0x40) ?
IB_WIDTH_4X : IB_WIDTH_1X;
props->active_speed = IB_SPEED_QDR;
- props->port_cap_flags = IB_PORT_CM_SUP;
+ props->port_cap_flags = IB_PORT_CM_SUP | IB_PORT_IP_BASED_GIDS;
props->gid_tbl_len = mdev->dev->caps.gid_table_len[port];
props->max_msg_sz = mdev->dev->caps.max_msg_sz;
props->pkey_tbl_len = 1;
@@ -1357,6 +1357,21 @@
&dev_attr_board_id
};
+static void mlx4_addrconf_ifid_eui48(u8 *eui, u16 vlan_id,
+ struct net_device *dev)
+{
+ memcpy(eui, dev->dev_addr, 3);
+ memcpy(eui + 5, dev->dev_addr + 3, 3);
+ if (vlan_id < 0x1000) {
+ eui[3] = vlan_id >> 8;
+ eui[4] = vlan_id & 0xff;
+ } else {
+ eui[3] = 0xff;
+ eui[4] = 0xfe;
+ }
+ eui[0] ^= 2;
+}
+
static void update_gids_task(struct work_struct *work)
{
struct update_gid_work *gw = container_of(work, struct update_gid_work, work);
@@ -1393,7 +1408,6 @@
struct mlx4_cmd_mailbox *mailbox;
union ib_gid *gids;
int err;
- int i;
struct mlx4_dev *dev = gw->dev->dev;
mailbox = mlx4_alloc_cmd_mailbox(dev);
@@ -1405,18 +1419,16 @@
gids = mailbox->buf;
memcpy(gids, gw->gids, sizeof(gw->gids));
- for (i = 1; i < gw->dev->num_ports + 1; i++) {
- if (mlx4_ib_port_link_layer(&gw->dev->ib_dev, i) ==
- IB_LINK_LAYER_ETHERNET) {
- err = mlx4_cmd(dev, mailbox->dma,
- MLX4_SET_PORT_GID_TABLE << 8 | i,
- 1, MLX4_CMD_SET_PORT,
- MLX4_CMD_TIME_CLASS_B,
- MLX4_CMD_WRAPPED);
- if (err)
- pr_warn(KERN_WARNING
- "set port %d command failed\n", i);
- }
+ if (mlx4_ib_port_link_layer(&gw->dev->ib_dev, gw->port) ==
+ IB_LINK_LAYER_ETHERNET) {
+ err = mlx4_cmd(dev, mailbox->dma,
+ MLX4_SET_PORT_GID_TABLE << 8 | gw->port,
+ 1, MLX4_CMD_SET_PORT,
+ MLX4_CMD_TIME_CLASS_B,
+ MLX4_CMD_WRAPPED);
+ if (err)
+ pr_warn(KERN_WARNING
+ "set port %d command failed\n", gw->port);
}
mlx4_free_cmd_mailbox(dev, mailbox);
@@ -1425,7 +1437,8 @@
}
static int update_gid_table(struct mlx4_ib_dev *dev, int port,
- union ib_gid *gid, int clear)
+ union ib_gid *gid, int clear,
+ int default_gid)
{
struct update_gid_work *work;
int i;
@@ -1434,26 +1447,31 @@
int found = -1;
int max_gids;
- max_gids = dev->dev->caps.gid_table_len[port];
- for (i = 0; i < max_gids; ++i) {
- if (!memcmp(&dev->iboe.gid_table[port - 1][i], gid,
- sizeof(*gid)))
- found = i;
-
- if (clear) {
- if (found >= 0) {
- need_update = 1;
- dev->iboe.gid_table[port - 1][found] = zgid;
- break;
- }
- } else {
- if (found >= 0)
- break;
-
- if (free < 0 &&
- !memcmp(&dev->iboe.gid_table[port - 1][i], &zgid,
+ if (default_gid) {
+ free = 0;
+ } else {
+ max_gids = dev->dev->caps.gid_table_len[port];
+ for (i = 1; i < max_gids; ++i) {
+ if (!memcmp(&dev->iboe.gid_table[port - 1][i], gid,
sizeof(*gid)))
- free = i;
+ found = i;
+
+ if (clear) {
+ if (found >= 0) {
+ need_update = 1;
+ dev->iboe.gid_table[port - 1][found] =
+ zgid;
+ break;
+ }
+ } else {
+ if (found >= 0)
+ break;
+
+ if (free < 0 &&
+ !memcmp(&dev->iboe.gid_table[port - 1][i],
+ &zgid, sizeof(*gid)))
+ free = i;
+ }
}
}
@@ -1478,18 +1496,26 @@
return 0;
}
-static int reset_gid_table(struct mlx4_ib_dev *dev)
+static void mlx4_make_default_gid(struct net_device *dev, union ib_gid *gid)
+{
+ gid->global.subnet_prefix = cpu_to_be64(0xfe80000000000000LL);
+ mlx4_addrconf_ifid_eui48(&gid->raw[8], 0xffff, dev);
+}
+
+
+static int reset_gid_table(struct mlx4_ib_dev *dev, u8 port)
{
struct update_gid_work *work;
-
work = kzalloc(sizeof(*work), GFP_ATOMIC);
if (!work)
return -ENOMEM;
- memset(dev->iboe.gid_table, 0, sizeof(dev->iboe.gid_table));
+
+ memset(dev->iboe.gid_table[port - 1], 0, sizeof(work->gids));
memset(work->gids, 0, sizeof(work->gids));
INIT_WORK(&work->work, reset_gids_task);
work->dev = dev;
+ work->port = port;
queue_work(wq, &work->work);
return 0;
}
@@ -1502,6 +1528,12 @@
struct net_device *real_dev = rdma_vlan_dev_real_dev(event_netdev) ?
rdma_vlan_dev_real_dev(event_netdev) :
event_netdev;
+ union ib_gid default_gid;
+
+ mlx4_make_default_gid(real_dev, &default_gid);
+
+ if (!memcmp(gid, &default_gid, sizeof(*gid)))
+ return 0;
if (event != NETDEV_DOWN && event != NETDEV_UP)
return 0;
@@ -1520,7 +1552,7 @@
(!netif_is_bond_master(real_dev) &&
(real_dev == iboe->netdevs[port - 1])))
update_gid_table(ibdev, port, gid,
- event == NETDEV_DOWN);
+ event == NETDEV_DOWN, 0);
spin_unlock(&iboe->lock);
return 0;
@@ -1536,7 +1568,6 @@
rdma_vlan_dev_real_dev(dev) : dev;
iboe = &ibdev->iboe;
- spin_lock(&iboe->lock);
for (port = 1; port <= MLX4_MAX_PORTS; ++port)
if ((netif_is_bond_master(real_dev) &&
@@ -1545,8 +1576,6 @@
(real_dev == iboe->netdevs[port - 1])))
break;
- spin_unlock(&iboe->lock);
-
if ((port == 0) || (port > MLX4_MAX_PORTS))
return 0;
else
@@ -1607,7 +1636,7 @@
/*ifa->ifa_address;*/
ipv6_addr_set_v4mapped(ifa->ifa_address,
(struct in6_addr *)&gid);
- update_gid_table(ibdev, port, &gid, 0);
+ update_gid_table(ibdev, port, &gid, 0, 0);
}
endfor_ifa(in_dev);
in_dev_put(in_dev);
@@ -1619,7 +1648,7 @@
read_lock_bh(&in6_dev->lock);
list_for_each_entry(ifp, &in6_dev->addr_list, if_list) {
pgid = (union ib_gid *)&ifp->addr;
- update_gid_table(ibdev, port, pgid, 0);
+ update_gid_table(ibdev, port, pgid, 0, 0);
}
read_unlock_bh(&in6_dev->lock);
in6_dev_put(in6_dev);
@@ -1627,14 +1656,26 @@
#endif
}
+static void mlx4_ib_set_default_gid(struct mlx4_ib_dev *ibdev,
+ struct net_device *dev, u8 port)
+{
+ union ib_gid gid;
+ mlx4_make_default_gid(dev, &gid);
+ update_gid_table(ibdev, port, &gid, 0, 1);
+}
+
static int mlx4_ib_init_gid_table(struct mlx4_ib_dev *ibdev)
{
struct net_device *dev;
+ struct mlx4_ib_iboe *iboe = &ibdev->iboe;
+ int i;
- if (reset_gid_table(ibdev))
- return -1;
+ for (i = 1; i <= ibdev->num_ports; ++i)
+ if (reset_gid_table(ibdev, i))
+ return -1;
read_lock(&dev_base_lock);
+ spin_lock(&iboe->lock);
for_each_netdev(&init_net, dev) {
u8 port = mlx4_ib_get_dev_port(dev, ibdev);
@@ -1642,6 +1683,7 @@
mlx4_ib_get_dev_addr(dev, ibdev, port);
}
+ spin_unlock(&iboe->lock);
read_unlock(&dev_base_lock);
return 0;
@@ -1656,25 +1698,57 @@
spin_lock(&iboe->lock);
mlx4_foreach_ib_transport_port(port, ibdev->dev) {
+ enum ib_port_state port_state = IB_PORT_NOP;
struct net_device *old_master = iboe->masters[port - 1];
+ struct net_device *curr_netdev;
struct net_device *curr_master;
+
iboe->netdevs[port - 1] =
mlx4_get_protocol_dev(ibdev->dev, MLX4_PROT_ETH, port);
+ if (iboe->netdevs[port - 1])
+ mlx4_ib_set_default_gid(ibdev,
+ iboe->netdevs[port - 1], port);
+ curr_netdev = iboe->netdevs[port - 1];
if (iboe->netdevs[port - 1] &&
netif_is_bond_slave(iboe->netdevs[port - 1])) {
- rtnl_lock();
iboe->masters[port - 1] = netdev_master_upper_dev_get(
iboe->netdevs[port - 1]);
- rtnl_unlock();
+ } else {
+ iboe->masters[port - 1] = NULL;
}
curr_master = iboe->masters[port - 1];
+ if (curr_netdev) {
+ port_state = (netif_running(curr_netdev) && netif_carrier_ok(curr_netdev)) ?
+ IB_PORT_ACTIVE : IB_PORT_DOWN;
+ mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
+ } else {
+ reset_gid_table(ibdev, port);
+ }
+ /* if using bonding/team and a slave port is down, we don't the bond IP
+ * based gids in the table since flows that select port by gid may get
+ * the down port.
+ */
+ if (curr_master && (port_state == IB_PORT_DOWN)) {
+ reset_gid_table(ibdev, port);
+ mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
+ }
/* if bonding is used it is possible that we add it to masters
- only after IP address is assigned to the net bonding
- interface */
- if (curr_master && (old_master != curr_master))
+ * only after IP address is assigned to the net bonding
+ * interface.
+ */
+ if (curr_master && (old_master != curr_master)) {
+ reset_gid_table(ibdev, port);
+ mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
mlx4_ib_get_dev_addr(curr_master, ibdev, port);
+ }
+
+ if (!curr_master && (old_master != curr_master)) {
+ reset_gid_table(ibdev, port);
+ mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
+ mlx4_ib_get_dev_addr(curr_netdev, ibdev, port);
+ }
}
spin_unlock(&iboe->lock);
@@ -1810,6 +1884,7 @@
int i, j;
int err;
struct mlx4_ib_iboe *iboe;
+ int ib_num_ports = 0;
pr_info_once("%s", mlx4_ib_version);
@@ -1985,10 +2060,14 @@
ibdev->counters[i] = -1;
}
+ mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
+ ib_num_ports++;
+
spin_lock_init(&ibdev->sm_lock);
mutex_init(&ibdev->cap_mask_mutex);
- if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED) {
+ if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED &&
+ ib_num_ports) {
ibdev->steer_qpn_count = MLX4_IB_UC_MAX_NUM_QPS;
err = mlx4_qp_reserve_range(dev, ibdev->steer_qpn_count,
MLX4_IB_UC_STEER_QPN_ALIGN,
@@ -2051,7 +2130,11 @@
}
}
#endif
+ for (i = 1 ; i <= ibdev->num_ports ; ++i)
+ reset_gid_table(ibdev, i);
+ rtnl_lock();
mlx4_ib_scan_netdevs(ibdev);
+ rtnl_unlock();
mlx4_ib_init_gid_table(ibdev);
}
diff --git a/drivers/infiniband/hw/mlx5/Kconfig b/drivers/infiniband/hw/mlx5/Kconfig
index 8e6aebf..10df386 100644
--- a/drivers/infiniband/hw/mlx5/Kconfig
+++ b/drivers/infiniband/hw/mlx5/Kconfig
@@ -1,6 +1,6 @@
config MLX5_INFINIBAND
tristate "Mellanox Connect-IB HCA support"
- depends on NETDEVICES && ETHERNET && PCI && X86
+ depends on NETDEVICES && ETHERNET && PCI
select NET_VENDOR_MELLANOX
select MLX5_CORE
---help---
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 9660d09..aa03e73 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -261,8 +261,7 @@
props->device_cap_flags = IB_DEVICE_CHANGE_PHY_PORT |
IB_DEVICE_PORT_ACTIVE_EVENT |
IB_DEVICE_SYS_IMAGE_GUID |
- IB_DEVICE_RC_RNR_NAK_GEN |
- IB_DEVICE_BLOCK_MULTICAST_LOOPBACK;
+ IB_DEVICE_RC_RNR_NAK_GEN;
flags = dev->mdev.caps.flags;
if (flags & MLX5_DEV_CAP_FLAG_BAD_PKEY_CNTR)
props->device_cap_flags |= IB_DEVICE_BAD_PKEY_CNTR;
@@ -536,24 +535,38 @@
struct ib_udata *udata)
{
struct mlx5_ib_dev *dev = to_mdev(ibdev);
- struct mlx5_ib_alloc_ucontext_req req;
+ struct mlx5_ib_alloc_ucontext_req_v2 req;
struct mlx5_ib_alloc_ucontext_resp resp;
struct mlx5_ib_ucontext *context;
struct mlx5_uuar_info *uuari;
struct mlx5_uar *uars;
int gross_uuars;
int num_uars;
+ int ver;
int uuarn;
int err;
int i;
+ int reqlen;
if (!dev->ib_active)
return ERR_PTR(-EAGAIN);
- err = ib_copy_from_udata(&req, udata, sizeof(req));
+ memset(&req, 0, sizeof(req));
+ reqlen = udata->inlen - sizeof(struct ib_uverbs_cmd_hdr);
+ if (reqlen == sizeof(struct mlx5_ib_alloc_ucontext_req))
+ ver = 0;
+ else if (reqlen == sizeof(struct mlx5_ib_alloc_ucontext_req_v2))
+ ver = 2;
+ else
+ return ERR_PTR(-EINVAL);
+
+ err = ib_copy_from_udata(&req, udata, reqlen);
if (err)
return ERR_PTR(err);
+ if (req.flags || req.reserved)
+ return ERR_PTR(-EINVAL);
+
if (req.total_num_uuars > MLX5_MAX_UUARS)
return ERR_PTR(-ENOMEM);
@@ -626,6 +639,7 @@
if (err)
goto out_uars;
+ uuari->ver = ver;
uuari->num_low_latency_uuars = req.num_low_latency_uuars;
uuari->uars = uars;
uuari->num_uars = num_uars;
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index ae37fb9..7dfe8a1 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -216,7 +216,9 @@
case IB_QPT_UC:
size += sizeof(struct mlx5_wqe_ctrl_seg) +
- sizeof(struct mlx5_wqe_raddr_seg);
+ sizeof(struct mlx5_wqe_raddr_seg) +
+ sizeof(struct mlx5_wqe_umr_ctrl_seg) +
+ sizeof(struct mlx5_mkey_seg);
break;
case IB_QPT_UD:
@@ -428,11 +430,17 @@
break;
case MLX5_IB_LATENCY_CLASS_MEDIUM:
- uuarn = alloc_med_class_uuar(uuari);
+ if (uuari->ver < 2)
+ uuarn = -ENOMEM;
+ else
+ uuarn = alloc_med_class_uuar(uuari);
break;
case MLX5_IB_LATENCY_CLASS_HIGH:
- uuarn = alloc_high_class_uuar(uuari);
+ if (uuari->ver < 2)
+ uuarn = -ENOMEM;
+ else
+ uuarn = alloc_high_class_uuar(uuari);
break;
case MLX5_IB_LATENCY_CLASS_FAST_PATH:
@@ -657,8 +665,8 @@
int err;
uuari = &dev->mdev.priv.uuari;
- if (init_attr->create_flags & IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK)
- qp->flags |= MLX5_IB_QP_BLOCK_MULTICAST_LOOPBACK;
+ if (init_attr->create_flags)
+ return -EINVAL;
if (init_attr->qp_type == MLX5_IB_QPT_REG_UMR)
lc = MLX5_IB_LATENCY_CLASS_FAST_PATH;
diff --git a/drivers/infiniband/hw/mlx5/user.h b/drivers/infiniband/hw/mlx5/user.h
index 32a2a5d..0f4f8e4 100644
--- a/drivers/infiniband/hw/mlx5/user.h
+++ b/drivers/infiniband/hw/mlx5/user.h
@@ -62,6 +62,13 @@
__u32 num_low_latency_uuars;
};
+struct mlx5_ib_alloc_ucontext_req_v2 {
+ __u32 total_num_uuars;
+ __u32 num_low_latency_uuars;
+ __u32 flags;
+ __u32 reserved;
+};
+
struct mlx5_ib_alloc_ucontext_resp {
__u32 qp_tab_size;
__u32 bf_reg_size;
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index 4291410..353c7b0 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -675,8 +675,11 @@
INIT_DELAYED_WORK(&nesdev->work, nes_recheck_link_status);
/* Initialize network devices */
- if ((netdev = nes_netdev_init(nesdev, mmio_regs)) == NULL)
+ netdev = nes_netdev_init(nesdev, mmio_regs);
+ if (netdev == NULL) {
+ ret = -ENOMEM;
goto bail7;
+ }
/* Register network device */
ret = register_netdev(netdev);
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
index 2ca86ca..1a8a945 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
@@ -127,7 +127,7 @@
is_vlan = netdev->priv_flags & IFF_802_1Q_VLAN;
if (is_vlan)
- netdev = vlan_dev_real_dev(netdev);
+ netdev = rdma_vlan_dev_real_dev(netdev);
rcu_read_lock();
list_for_each_entry_rcu(dev, &ocrdma_dev_list, entry) {
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
index aa92f40..e0cc201 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
@@ -176,7 +176,7 @@
props->port_cap_flags =
IB_PORT_CM_SUP |
IB_PORT_REINIT_SUP |
- IB_PORT_DEVICE_MGMT_SUP | IB_PORT_VENDOR_CLASS_SUP;
+ IB_PORT_DEVICE_MGMT_SUP | IB_PORT_VENDOR_CLASS_SUP | IB_PORT_IP_BASED_GIDS;
props->gid_tbl_len = OCRDMA_MAX_SGID;
props->pkey_tbl_len = 1;
props->bad_pkey_cntr = 0;
@@ -1416,7 +1416,7 @@
OCRDMA_QP_PARAMS_HOP_LMT_MASK) >>
OCRDMA_QP_PARAMS_HOP_LMT_SHIFT;
qp_attr->ah_attr.grh.traffic_class = (params.tclass_sq_psn &
- OCRDMA_QP_PARAMS_SQ_PSN_MASK) >>
+ OCRDMA_QP_PARAMS_TCLASS_MASK) >>
OCRDMA_QP_PARAMS_TCLASS_SHIFT;
qp_attr->ah_attr.ah_flags = IB_AH_GRH;
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 5bfc02f..d1bd213 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -2395,6 +2395,11 @@
qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
qib_write_kreg(dd, kr_scratch, 0ULL);
+ /* ensure previous Tx parameters are not still forced */
+ qib_write_kreg_port(ppd, krp_tx_deemph_override,
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ reset_tx_deemphasis_override));
+
if (qib_compat_ddr_negotiate) {
ppd->cpspec->ibdeltainprog = 1;
ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd,
diff --git a/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c b/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
index 7ecc606..f8dfd76 100644
--- a/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
+++ b/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
@@ -629,6 +629,7 @@
{
enum usnic_transport_type trans_type = qp_flow->trans_type;
int err;
+ uint16_t port_num = 0;
switch (trans_type) {
case USNIC_TRANSPORT_ROCE_CUSTOM:
@@ -637,9 +638,15 @@
case USNIC_TRANSPORT_IPV4_UDP:
err = usnic_transport_sock_get_addr(qp_flow->udp.sock,
NULL, NULL,
- (uint16_t *) id);
+ &port_num);
if (err)
return err;
+ /*
+ * Copy port_num to stack first and then to *id,
+ * so that the short to int cast works for little
+ * and big endian systems.
+ */
+ *id = port_num;
break;
default:
usnic_err("Unsupported transport %u\n", trans_type);
diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index 5388226..334f34b 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -610,11 +610,12 @@
ib_dma_unmap_single(device->ib_device, tx_desc->dma_addr,
ISER_HEADERS_LEN, DMA_TO_DEVICE);
kmem_cache_free(ig.desc_cache, tx_desc);
+ tx_desc = NULL;
}
atomic_dec(&ib_conn->post_send_buf_count);
- if (tx_desc->type == ISCSI_TX_CONTROL) {
+ if (tx_desc && tx_desc->type == ISCSI_TX_CONTROL) {
/* this arithmetic is legal by libiscsi dd_data allocation */
task = (void *) ((long)(void *)tx_desc -
sizeof(struct iscsi_task));
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index afe9567..ca37ede 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -652,9 +652,13 @@
/* getting here when the state is UP means that the conn is being *
* terminated asynchronously from the iSCSI layer's perspective. */
if (iser_conn_state_comp_exch(ib_conn, ISER_CONN_UP,
- ISER_CONN_TERMINATING))
- iscsi_conn_failure(ib_conn->iser_conn->iscsi_conn,
- ISCSI_ERR_CONN_FAILED);
+ ISER_CONN_TERMINATING)){
+ if (ib_conn->iser_conn)
+ iscsi_conn_failure(ib_conn->iser_conn->iscsi_conn,
+ ISCSI_ERR_CONN_FAILED);
+ else
+ iser_err("iscsi_iser connection isn't bound\n");
+ }
/* Complete the termination process if no posts are pending */
if (ib_conn->post_recv_buf_count == 0 &&
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 2b161be..d18d08a 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -453,6 +453,7 @@
if (ret) {
pr_err("Failed to create fastreg descriptor err=%d\n",
ret);
+ kfree(fr_desc);
goto err;
}
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 520a7e5..0e537d8 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -3666,9 +3666,9 @@
unsigned long val;
int ret;
- ret = strict_strtoul(page, 0, &val);
+ ret = kstrtoul(page, 0, &val);
if (ret < 0) {
- pr_err("strict_strtoul() failed with ret: %d\n", ret);
+ pr_err("kstrtoul() failed with ret: %d\n", ret);
return -EINVAL;
}
if (val > MAX_SRPT_RDMA_SIZE) {
@@ -3706,9 +3706,9 @@
unsigned long val;
int ret;
- ret = strict_strtoul(page, 0, &val);
+ ret = kstrtoul(page, 0, &val);
if (ret < 0) {
- pr_err("strict_strtoul() failed with ret: %d\n", ret);
+ pr_err("kstrtoul() failed with ret: %d\n", ret);
return -EINVAL;
}
if (val > MAX_SRPT_RSP_SIZE) {
@@ -3746,9 +3746,9 @@
unsigned long val;
int ret;
- ret = strict_strtoul(page, 0, &val);
+ ret = kstrtoul(page, 0, &val);
if (ret < 0) {
- pr_err("strict_strtoul() failed with ret: %d\n", ret);
+ pr_err("kstrtoul() failed with ret: %d\n", ret);
return -EINVAL;
}
if (val > MAX_SRPT_SRQ_SIZE) {
@@ -3793,7 +3793,7 @@
unsigned long tmp;
int ret;
- ret = strict_strtoul(page, 0, &tmp);
+ ret = kstrtoul(page, 0, &tmp);
if (ret < 0) {
printk(KERN_ERR "Unable to extract srpt_tpg_store_enable\n");
return -EINVAL;
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 17ccba8..ed8e5e8 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -67,7 +67,7 @@
}
if (value > 20 && value < 32767)
- count = (IXP4XX_TIMER_FREQ / (value * 4)) - 1;
+ count = (ixp4xx_timer_freq / (value * 4)) - 1;
ixp4xx_spkr_control(pin, count);
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 86b484c..5194afb 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -21,6 +21,7 @@
obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
+obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o
obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o
obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index 9300bc3..5409564 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -381,7 +381,7 @@
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
& PCI_MSI_DOORBELL_MASK;
- writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base +
+ writel(~msimask, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
for (msinr = PCI_MSI_DOORBELL_START;
@@ -407,7 +407,7 @@
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
& IPI_DOORBELL_MASK;
- writel(~IPI_DOORBELL_MASK, per_cpu_int_base +
+ writel(~ipimask, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
/* Handle all pending doorbells */
diff --git a/drivers/irqchip/irq-zevio.c b/drivers/irqchip/irq-zevio.c
new file mode 100644
index 0000000..8ed04c4
--- /dev/null
+++ b/drivers/irqchip/irq-zevio.c
@@ -0,0 +1,127 @@
+/*
+ * linux/drivers/irqchip/irq-zevio.c
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach/irq.h>
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define IO_STATUS 0x000
+#define IO_RAW_STATUS 0x004
+#define IO_ENABLE 0x008
+#define IO_DISABLE 0x00C
+#define IO_CURRENT 0x020
+#define IO_RESET 0x028
+#define IO_MAX_PRIOTY 0x02C
+
+#define IO_IRQ_BASE 0x000
+#define IO_FIQ_BASE 0x100
+
+#define IO_INVERT_SEL 0x200
+#define IO_STICKY_SEL 0x204
+#define IO_PRIORITY_SEL 0x300
+
+#define MAX_INTRS 32
+#define FIQ_START MAX_INTRS
+
+static struct irq_domain *zevio_irq_domain;
+static void __iomem *zevio_irq_io;
+
+static void zevio_irq_ack(struct irq_data *irqd)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(irqd);
+ struct irq_chip_regs *regs =
+ &container_of(irqd->chip, struct irq_chip_type, chip)->regs;
+
+ readl(gc->reg_base + regs->ack);
+}
+
+static asmlinkage void __exception_irq_entry zevio_handle_irq(struct pt_regs *regs)
+{
+ int irqnr;
+
+ while (readl(zevio_irq_io + IO_STATUS)) {
+ irqnr = readl(zevio_irq_io + IO_CURRENT);
+ irqnr = irq_find_mapping(zevio_irq_domain, irqnr);
+ handle_IRQ(irqnr, regs);
+ };
+}
+
+static void __init zevio_init_irq_base(void __iomem *base)
+{
+ /* Disable all interrupts */
+ writel(~0, base + IO_DISABLE);
+
+ /* Accept interrupts of all priorities */
+ writel(0xF, base + IO_MAX_PRIOTY);
+
+ /* Reset existing interrupts */
+ readl(base + IO_RESET);
+}
+
+static int __init zevio_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ struct irq_chip_generic *gc;
+ int ret;
+
+ if (WARN_ON(zevio_irq_io || zevio_irq_domain))
+ return -EBUSY;
+
+ zevio_irq_io = of_iomap(node, 0);
+ BUG_ON(!zevio_irq_io);
+
+ /* Do not invert interrupt status bits */
+ writel(~0, zevio_irq_io + IO_INVERT_SEL);
+
+ /* Disable sticky interrupts */
+ writel(0, zevio_irq_io + IO_STICKY_SEL);
+
+ /* We don't use IRQ priorities. Set each IRQ to highest priority. */
+ memset_io(zevio_irq_io + IO_PRIORITY_SEL, 0, MAX_INTRS * sizeof(u32));
+
+ /* Init IRQ and FIQ */
+ zevio_init_irq_base(zevio_irq_io + IO_IRQ_BASE);
+ zevio_init_irq_base(zevio_irq_io + IO_FIQ_BASE);
+
+ zevio_irq_domain = irq_domain_add_linear(node, MAX_INTRS,
+ &irq_generic_chip_ops, NULL);
+ BUG_ON(!zevio_irq_domain);
+
+ ret = irq_alloc_domain_generic_chips(zevio_irq_domain, MAX_INTRS, 1,
+ "zevio_intc", handle_level_irq,
+ clr, 0, IRQ_GC_INIT_MASK_CACHE);
+ BUG_ON(ret);
+
+ gc = irq_get_domain_generic_chip(zevio_irq_domain, 0);
+ gc->reg_base = zevio_irq_io;
+ gc->chip_types[0].chip.irq_ack = zevio_irq_ack;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
+ gc->chip_types[0].regs.mask = IO_IRQ_BASE + IO_ENABLE;
+ gc->chip_types[0].regs.enable = IO_IRQ_BASE + IO_ENABLE;
+ gc->chip_types[0].regs.disable = IO_IRQ_BASE + IO_DISABLE;
+ gc->chip_types[0].regs.ack = IO_IRQ_BASE + IO_RESET;
+
+ set_handle_irq(zevio_handle_irq);
+
+ pr_info("TI-NSPIRE classic IRQ controller\n");
+ return 0;
+}
+
+IRQCHIP_DECLARE(zevio_irq, "lsi,zevio-intc", zevio_of_init);
diff --git a/drivers/isdn/hisax/q931.c b/drivers/isdn/hisax/q931.c
index af1b020..b420f8b 100644
--- a/drivers/isdn/hisax/q931.c
+++ b/drivers/isdn/hisax/q931.c
@@ -810,7 +810,7 @@
dp += sprintf(dp, " octet 3 ");
dp += prbits(dp, *p, 8, 8);
*dp++ = '\n';
- if (!(*p++ & 80)) {
+ if (!(*p++ & 0x80)) {
dp += sprintf(dp, " octet 4 ");
dp += prbits(dp, *p++, 8, 8);
*dp++ = '\n';
diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
index 0c707e4..a4c7306 100644
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -210,7 +210,9 @@
#define GC_MARK_RECLAIMABLE 0
#define GC_MARK_DIRTY 1
#define GC_MARK_METADATA 2
-BITMASK(GC_SECTORS_USED, struct bucket, gc_mark, 2, 13);
+#define GC_SECTORS_USED_SIZE 13
+#define MAX_GC_SECTORS_USED (~(~0ULL << GC_SECTORS_USED_SIZE))
+BITMASK(GC_SECTORS_USED, struct bucket, gc_mark, 2, GC_SECTORS_USED_SIZE);
BITMASK(GC_MOVE, struct bucket, gc_mark, 15, 1);
#include "journal.h"
diff --git a/drivers/md/bcache/bset.c b/drivers/md/bcache/bset.c
index 4f6b594..3f74b4b 100644
--- a/drivers/md/bcache/bset.c
+++ b/drivers/md/bcache/bset.c
@@ -23,7 +23,7 @@
for (k = i->start; k < bset_bkey_last(i); k = next) {
next = bkey_next(k);
- printk(KERN_ERR "block %u key %zi/%u: ", set,
+ printk(KERN_ERR "block %u key %li/%u: ", set,
(uint64_t *) k - i->d, i->keys);
if (b->ops->key_dump)
@@ -1185,9 +1185,12 @@
struct bset *out = (void *) __get_free_pages(__GFP_NOWARN|GFP_NOIO,
order);
if (!out) {
+ struct page *outp;
+
BUG_ON(order > state->page_order);
- out = page_address(mempool_alloc(state->pool, GFP_NOIO));
+ outp = mempool_alloc(state->pool, GFP_NOIO);
+ out = page_address(outp);
used_mempool = true;
order = state->page_order;
}
diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c
index 98cc0a8..5f9c2a6 100644
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -1167,7 +1167,7 @@
/* guard against overflow */
SET_GC_SECTORS_USED(g, min_t(unsigned,
GC_SECTORS_USED(g) + KEY_SIZE(k),
- (1 << 14) - 1));
+ MAX_GC_SECTORS_USED));
BUG_ON(!GC_SECTORS_USED(g));
}
@@ -1805,7 +1805,7 @@
static size_t insert_u64s_remaining(struct btree *b)
{
- ssize_t ret = bch_btree_keys_u64s_remaining(&b->keys);
+ long ret = bch_btree_keys_u64s_remaining(&b->keys);
/*
* Might land in the middle of an existing extent and have to split it
diff --git a/drivers/md/bcache/extents.c b/drivers/md/bcache/extents.c
index c3ead58..416d1a3 100644
--- a/drivers/md/bcache/extents.c
+++ b/drivers/md/bcache/extents.c
@@ -194,7 +194,7 @@
mutex_unlock(&b->c->bucket_lock);
bch_extent_to_text(buf, sizeof(buf), k);
btree_bug(b,
-"inconsistent btree pointer %s: bucket %li pin %i prio %i gen %i last_gc %i mark %llu gc_gen %i",
+"inconsistent btree pointer %s: bucket %zi pin %i prio %i gen %i last_gc %i mark %llu gc_gen %i",
buf, PTR_BUCKET_NR(b->c, k, i), atomic_read(&g->pin),
g->prio, g->gen, g->last_gc, GC_MARK(g), g->gc_gen);
return true;
diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c
index 72cd213..5d5d031 100644
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -353,14 +353,14 @@
struct data_insert_op *op = container_of(cl, struct data_insert_op, cl);
struct bio *bio = op->bio, *n;
- if (op->bypass)
- return bch_data_invalidate(cl);
-
if (atomic_sub_return(bio_sectors(bio), &op->c->sectors_to_gc) < 0) {
set_gc_sectors(op->c);
wake_up_gc(op->c);
}
+ if (op->bypass)
+ return bch_data_invalidate(cl);
+
/*
* Journal writes are marked REQ_FLUSH; if the original write was a
* flush, it'll wait on the journal write.
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index c6ab693..d8458d4 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -416,7 +416,7 @@
return MAP_CONTINUE;
}
-int bch_bset_print_stats(struct cache_set *c, char *buf)
+static int bch_bset_print_stats(struct cache_set *c, char *buf)
{
struct bset_stats_op op;
int ret;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index fd3a2a1..4a6ca1c 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1953,11 +1953,15 @@
for (i = 0; i < conf->raid_disks * 2; i++) {
int j;
int size;
+ int uptodate;
struct bio *b = r1_bio->bios[i];
if (b->bi_end_io != end_sync_read)
continue;
- /* fixup the bio for reuse */
+ /* fixup the bio for reuse, but preserve BIO_UPTODATE */
+ uptodate = test_bit(BIO_UPTODATE, &b->bi_flags);
bio_reset(b);
+ if (!uptodate)
+ clear_bit(BIO_UPTODATE, &b->bi_flags);
b->bi_vcnt = vcnt;
b->bi_iter.bi_size = r1_bio->sectors << 9;
b->bi_iter.bi_sector = r1_bio->sector +
@@ -1990,11 +1994,14 @@
int j;
struct bio *pbio = r1_bio->bios[primary];
struct bio *sbio = r1_bio->bios[i];
+ int uptodate = test_bit(BIO_UPTODATE, &sbio->bi_flags);
if (sbio->bi_end_io != end_sync_read)
continue;
+ /* Now we can 'fixup' the BIO_UPTODATE flag */
+ set_bit(BIO_UPTODATE, &sbio->bi_flags);
- if (test_bit(BIO_UPTODATE, &sbio->bi_flags)) {
+ if (uptodate) {
for (j = vcnt; j-- ; ) {
struct page *p, *s;
p = pbio->bi_io_vec[j].bv_page;
@@ -2009,7 +2016,7 @@
if (j >= 0)
atomic64_add(r1_bio->sectors, &mddev->resync_mismatches);
if (j < 0 || (test_bit(MD_RECOVERY_CHECK, &mddev->recovery)
- && test_bit(BIO_UPTODATE, &sbio->bi_flags))) {
+ && uptodate)) {
/* No need to write to this device. */
sbio->bi_end_io = NULL;
rdev_dec_pending(conf->mirrors[i].rdev, mddev);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f1feade..16f5c21 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5514,23 +5514,43 @@
return sectors * (raid_disks - conf->max_degraded);
}
+static void free_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu)
+{
+ safe_put_page(percpu->spare_page);
+ kfree(percpu->scribble);
+ percpu->spare_page = NULL;
+ percpu->scribble = NULL;
+}
+
+static int alloc_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu)
+{
+ if (conf->level == 6 && !percpu->spare_page)
+ percpu->spare_page = alloc_page(GFP_KERNEL);
+ if (!percpu->scribble)
+ percpu->scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
+
+ if (!percpu->scribble || (conf->level == 6 && !percpu->spare_page)) {
+ free_scratch_buffer(conf, percpu);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
static void raid5_free_percpu(struct r5conf *conf)
{
- struct raid5_percpu *percpu;
unsigned long cpu;
if (!conf->percpu)
return;
- get_online_cpus();
- for_each_possible_cpu(cpu) {
- percpu = per_cpu_ptr(conf->percpu, cpu);
- safe_put_page(percpu->spare_page);
- kfree(percpu->scribble);
- }
#ifdef CONFIG_HOTPLUG_CPU
unregister_cpu_notifier(&conf->cpu_notify);
#endif
+
+ get_online_cpus();
+ for_each_possible_cpu(cpu)
+ free_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
put_online_cpus();
free_percpu(conf->percpu);
@@ -5557,15 +5577,7 @@
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- if (conf->level == 6 && !percpu->spare_page)
- percpu->spare_page = alloc_page(GFP_KERNEL);
- if (!percpu->scribble)
- percpu->scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
-
- if (!percpu->scribble ||
- (conf->level == 6 && !percpu->spare_page)) {
- safe_put_page(percpu->spare_page);
- kfree(percpu->scribble);
+ if (alloc_scratch_buffer(conf, percpu)) {
pr_err("%s: failed memory allocation for cpu%ld\n",
__func__, cpu);
return notifier_from_errno(-ENOMEM);
@@ -5573,10 +5585,7 @@
break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- safe_put_page(percpu->spare_page);
- kfree(percpu->scribble);
- percpu->spare_page = NULL;
- percpu->scribble = NULL;
+ free_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
break;
default:
break;
@@ -5588,40 +5597,29 @@
static int raid5_alloc_percpu(struct r5conf *conf)
{
unsigned long cpu;
- struct page *spare_page;
- struct raid5_percpu __percpu *allcpus;
- void *scribble;
- int err;
+ int err = 0;
- allcpus = alloc_percpu(struct raid5_percpu);
- if (!allcpus)
+ conf->percpu = alloc_percpu(struct raid5_percpu);
+ if (!conf->percpu)
return -ENOMEM;
- conf->percpu = allcpus;
- get_online_cpus();
- err = 0;
- for_each_present_cpu(cpu) {
- if (conf->level == 6) {
- spare_page = alloc_page(GFP_KERNEL);
- if (!spare_page) {
- err = -ENOMEM;
- break;
- }
- per_cpu_ptr(conf->percpu, cpu)->spare_page = spare_page;
- }
- scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
- if (!scribble) {
- err = -ENOMEM;
- break;
- }
- per_cpu_ptr(conf->percpu, cpu)->scribble = scribble;
- }
#ifdef CONFIG_HOTPLUG_CPU
conf->cpu_notify.notifier_call = raid456_cpu_notify;
conf->cpu_notify.priority = 0;
- if (err == 0)
- err = register_cpu_notifier(&conf->cpu_notify);
+ err = register_cpu_notifier(&conf->cpu_notify);
+ if (err)
+ return err;
#endif
+
+ get_online_cpus();
+ for_each_present_cpu(cpu) {
+ err = alloc_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
+ if (err) {
+ pr_err("%s: failed memory allocation for cpu%ld\n",
+ __func__, cpu);
+ break;
+ }
+ }
put_online_cpus();
return err;
diff --git a/drivers/media/dvb-frontends/cx24117.c b/drivers/media/dvb-frontends/cx24117.c
index 68f768a..a6c3c9e 100644
--- a/drivers/media/dvb-frontends/cx24117.c
+++ b/drivers/media/dvb-frontends/cx24117.c
@@ -1176,7 +1176,7 @@
switch (demod) {
case 0:
- dev_err(&state->priv->i2c->dev,
+ dev_err(&i2c->dev,
"%s: Error attaching frontend %d\n",
KBUILD_MODNAME, demod);
goto error1;
@@ -1200,12 +1200,6 @@
state->demod = demod - 1;
state->priv = priv;
- /* test i2c bus for ack */
- if (demod == 0) {
- if (cx24117_readreg(state, 0x00) < 0)
- goto error3;
- }
-
dev_info(&state->priv->i2c->dev,
"%s: Attaching frontend %d\n",
KBUILD_MODNAME, state->demod);
@@ -1216,8 +1210,6 @@
state->frontend.demodulator_priv = state;
return &state->frontend;
-error3:
- kfree(state);
error2:
cx24117_release_priv(priv);
error1:
diff --git a/drivers/media/dvb-frontends/nxt200x.c b/drivers/media/dvb-frontends/nxt200x.c
index 4bf0575..8a8e1ec 100644
--- a/drivers/media/dvb-frontends/nxt200x.c
+++ b/drivers/media/dvb-frontends/nxt200x.c
@@ -2,7 +2,7 @@
* Support for NXT2002 and NXT2004 - VSB/QAM
*
* Copyright (C) 2005 Kirk Lapray <kirk.lapray@gmail.com>
- * Copyright (C) 2006 Michael Krufky <mkrufky@m1k.net>
+ * Copyright (C) 2006-2014 Michael Krufky <mkrufky@linuxtv.org>
* based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
* and nxt2004 by Jean-Francois Thibert <jeanfrancois@sagetv.com>
*
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index 1effc21..9bbd665 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -2554,7 +2554,7 @@
sdp_write_and_or(sd, 0xdd, 0xf0, pdata->sdp_free_run_force |
(pdata->sdp_free_run_cbar_en << 1) |
(pdata->sdp_free_run_man_col_en << 2) |
- (pdata->sdp_free_run_force << 3));
+ (pdata->sdp_free_run_auto << 3));
/* TODO from platform data */
cp_write(sd, 0x69, 0x14); /* Enable CP CSC */
diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c
index 4b83811..77e10e0 100644
--- a/drivers/media/i2c/s5k5baf.c
+++ b/drivers/media/i2c/s5k5baf.c
@@ -478,25 +478,33 @@
u16 count, const u16 *seq)
{
struct i2c_client *c = v4l2_get_subdevdata(&state->sd);
- __be16 buf[count + 1];
- int ret, n;
+ __be16 buf[65];
s5k5baf_i2c_write(state, REG_CMDWR_ADDR, addr);
if (state->error)
return;
- buf[0] = __constant_cpu_to_be16(REG_CMD_BUF);
- for (n = 1; n <= count; ++n)
- buf[n] = cpu_to_be16(*seq++);
-
- n *= 2;
- ret = i2c_master_send(c, (char *)buf, n);
v4l2_dbg(3, debug, c, "i2c_write_seq(count=%d): %*ph\n", count,
- min(2 * count, 64), seq - count);
+ min(2 * count, 64), seq);
- if (ret != n) {
- v4l2_err(c, "i2c_write_seq: error during transfer (%d)\n", ret);
- state->error = ret;
+ buf[0] = __constant_cpu_to_be16(REG_CMD_BUF);
+
+ while (count > 0) {
+ int n = min_t(int, count, ARRAY_SIZE(buf) - 1);
+ int ret, i;
+
+ for (i = 1; i <= n; ++i)
+ buf[i] = cpu_to_be16(*seq++);
+
+ i *= 2;
+ ret = i2c_master_send(c, (char *)buf, i);
+ if (ret != i) {
+ v4l2_err(c, "i2c_write_seq: error during transfer (%d)\n", ret);
+ state->error = ret;
+ break;
+ }
+
+ count -= n;
}
}
diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c
index d85cb0a..6662b49 100644
--- a/drivers/media/pci/bt8xx/bttv-cards.c
+++ b/drivers/media/pci/bt8xx/bttv-cards.c
@@ -2426,7 +2426,7 @@
},
/* ---- card 0x87---------------------------------- */
[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
- /* Michael Krufky <mkrufky@m1k.net> */
+ /* Michael Krufky <mkrufky@linuxtv.org> */
.name = "DViCO FusionHDTV 5 Lite",
.tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
.tuner_addr = ADDR_UNSET,
diff --git a/drivers/media/pci/bt8xx/bttv-gpio.c b/drivers/media/pci/bt8xx/bttv-gpio.c
index 922e823..3f364b7 100644
--- a/drivers/media/pci/bt8xx/bttv-gpio.c
+++ b/drivers/media/pci/bt8xx/bttv-gpio.c
@@ -98,7 +98,7 @@
err = device_register(&sub->dev);
if (0 != err) {
- kfree(sub);
+ put_device(&sub->dev);
return err;
}
pr_info("%d: add subdevice \"%s\"\n", core->nr, dev_name(&sub->dev));
diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c
index d45e7f6..c9b2350 100644
--- a/drivers/media/pci/saa7134/saa7134-cards.c
+++ b/drivers/media/pci/saa7134/saa7134-cards.c
@@ -2590,7 +2590,7 @@
}},
},
[SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180] = {
- /* Michael Krufky <mkrufky@m1k.net>
+ /* Michael Krufky <mkrufky@linuxtv.org>
* Uses Alps Electric TDHU2, containing NXT2004 ATSC Decoder
* AFAIK, there is no analog demod, thus,
* no support for analog television.
diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c
index a7dfd07..da2fc86 100644
--- a/drivers/media/platform/exynos4-is/fimc-core.c
+++ b/drivers/media/platform/exynos4-is/fimc-core.c
@@ -1027,7 +1027,8 @@
return 0;
err_gclk:
- clk_disable(fimc->clock[CLK_GATE]);
+ if (!pm_runtime_enabled(dev))
+ clk_disable(fimc->clock[CLK_GATE]);
err_sd:
fimc_unregister_capture_subdev(fimc);
err_sclk:
@@ -1036,6 +1037,7 @@
return ret;
}
+#ifdef CONFIG_PM_RUNTIME
static int fimc_runtime_resume(struct device *dev)
{
struct fimc_dev *fimc = dev_get_drvdata(dev);
@@ -1068,6 +1070,7 @@
dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state);
return ret;
}
+#endif
#ifdef CONFIG_PM_SLEEP
static int fimc_resume(struct device *dev)
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index 1234734..779ec3c 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -1563,7 +1563,7 @@
if (!pm_runtime_enabled(dev)) {
ret = clk_enable(fimc->clock);
if (ret < 0)
- goto err_clk_put;
+ goto err_sd;
}
fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
@@ -1579,7 +1579,8 @@
return 0;
err_clk_dis:
- clk_disable(fimc->clock);
+ if (!pm_runtime_enabled(dev))
+ clk_disable(fimc->clock);
err_sd:
fimc_lite_unregister_capture_subdev(fimc);
err_clk_put:
@@ -1587,6 +1588,7 @@
return ret;
}
+#ifdef CONFIG_PM_RUNTIME
static int fimc_lite_runtime_resume(struct device *dev)
{
struct fimc_lite *fimc = dev_get_drvdata(dev);
@@ -1602,6 +1604,7 @@
clk_disable(fimc->clock);
return 0;
}
+#endif
#ifdef CONFIG_PM_SLEEP
static int fimc_lite_resume(struct device *dev)
diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index a1c78c8..7d68d0b 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -175,7 +175,7 @@
{
.name = "YUV 4:2:0 planar, Y/CbCr",
.fourcc = V4L2_PIX_FMT_NV12,
- .depth = 16,
+ .depth = 12,
.colplanes = 2,
.h_align = 1,
.v_align = 1,
@@ -188,10 +188,10 @@
{
.name = "YUV 4:2:0 planar, Y/CbCr",
.fourcc = V4L2_PIX_FMT_NV12,
- .depth = 16,
- .colplanes = 4,
+ .depth = 12,
+ .colplanes = 2,
.h_align = 4,
- .v_align = 1,
+ .v_align = 4,
.flags = SJPEG_FMT_FLAG_ENC_OUTPUT |
SJPEG_FMT_FLAG_DEC_CAPTURE |
SJPEG_FMT_FLAG_S5P |
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index 8f9b2cea..8ede8ea 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -1539,6 +1539,8 @@
&af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", NULL) },
{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05,
&af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xf900,
+ &af9035_props, "Hauppauge WinTV-MiniStick 2", NULL) },
{ }
};
MODULE_DEVICE_TABLE(usb, af9035_id_table);
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c
index d83df4b..0a98d04c 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.c
@@ -1,7 +1,7 @@
/*
* mxl111sf-demod.c - driver for the MaxLinear MXL111SF DVB-T demodulator
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -601,7 +601,7 @@
EXPORT_SYMBOL_GPL(mxl111sf_demod_attach);
MODULE_DESCRIPTION("MaxLinear MxL111SF DVB-T demodulator driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h
index 3f3f8bf..2d4530f 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h
@@ -1,7 +1,7 @@
/*
* mxl111sf-demod.h - driver for the MaxLinear MXL111SF DVB-T demodulator
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c
index e4121cb..a619410 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c
@@ -1,7 +1,7 @@
/*
* mxl111sf-gpio.c - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h
index 0220f54..b85a577 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h
@@ -1,7 +1,7 @@
/*
* mxl111sf-gpio.h - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
index 3443455..a101d06 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
@@ -1,7 +1,7 @@
/*
* mxl111sf-i2c.c - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h
index a57a45f..4657621 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.h
@@ -1,7 +1,7 @@
/*
* mxl111sf-i2c.h - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c
index b741b3a..f6b3480 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c
@@ -1,7 +1,7 @@
/*
* mxl111sf-phy.c - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h
index f075607..0643738 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.h
@@ -1,7 +1,7 @@
/*
* mxl111sf-phy.h - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h
index 17831b0..89bf115 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-reg.h
@@ -1,7 +1,7 @@
/*
* mxl111sf-reg.h - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c
index 879c529..a8d2c70 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c
@@ -1,7 +1,7 @@
/*
* mxl111sf-tuner.c - driver for the MaxLinear MXL111SF CMOS tuner
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -512,7 +512,7 @@
EXPORT_SYMBOL_GPL(mxl111sf_tuner_attach);
MODULE_DESCRIPTION("MaxLinear MxL111SF CMOS tuner driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h
index 90f583e..2046db2 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h
@@ -1,7 +1,7 @@
/*
* mxl111sf-tuner.h - driver for the MaxLinear MXL111SF CMOS tuner
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -68,7 +68,7 @@
#else
static inline
struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
- struct mxl111sf_state *mxl_state
+ struct mxl111sf_state *mxl_state,
struct mxl111sf_tuner_config *cfg)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
index 08240e4..c7304fa 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
+ * Copyright (C) 2010-2014 Michael Krufky (mkrufky@linuxtv.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -105,7 +105,7 @@
ret = -EINVAL;
}
- pr_debug("R: (0x%02x, 0x%02x)\n", addr, *data);
+ pr_debug("R: (0x%02x, 0x%02x)\n", addr, buf[1]);
fail:
return ret;
}
@@ -1421,7 +1421,7 @@
module_usb_driver(mxl111sf_usb_driver);
-MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.h b/drivers/media/usb/dvb-usb-v2/mxl111sf.h
index 9816de8..8516c01 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.h
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
+ * Copyright (C) 2010-2014 Michael Krufky (mkrufky@linuxtv.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/media/usb/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c
index 2f0c89c..c563896 100644
--- a/drivers/media/usb/hdpvr/hdpvr-core.c
+++ b/drivers/media/usb/hdpvr/hdpvr-core.c
@@ -198,7 +198,6 @@
hex_dump_to_buffer(response, 8, 16, 1, print_buf, 5*buf_size+1, 0);
v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, " response: %s\n",
print_buf);
- kfree(print_buf);
#endif
msleep(100);
@@ -214,6 +213,9 @@
retval = ret != 8;
unlock:
mutex_unlock(&dev->usbc_mutex);
+#ifdef HDPVR_DEBUG
+ kfree(print_buf);
+#endif
return retval;
}
diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c b/drivers/media/v4l2-core/v4l2-dv-timings.c
index ee52b9f4..f7902fe 100644
--- a/drivers/media/v4l2-core/v4l2-dv-timings.c
+++ b/drivers/media/v4l2-core/v4l2-dv-timings.c
@@ -515,6 +515,7 @@
aspect.denominator = 9;
}
image_width = ((image_height * aspect.numerator) / aspect.denominator);
+ image_width = (image_width + GTF_CELL_GRAN/2) & ~(GTF_CELL_GRAN - 1);
/* Horizontal */
if (default_gtf)
diff --git a/drivers/media/v4l2-core/videobuf-dma-contig.c b/drivers/media/v4l2-core/videobuf-dma-contig.c
index 65411adc..7e6b209 100644
--- a/drivers/media/v4l2-core/videobuf-dma-contig.c
+++ b/drivers/media/v4l2-core/videobuf-dma-contig.c
@@ -66,14 +66,11 @@
static void videobuf_vm_open(struct vm_area_struct *vma)
{
struct videobuf_mapping *map = vma->vm_private_data;
- struct videobuf_queue *q = map->q;
- dev_dbg(q->dev, "vm_open %p [count=%u,vma=%08lx-%08lx]\n",
+ dev_dbg(map->q->dev, "vm_open %p [count=%u,vma=%08lx-%08lx]\n",
map, map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
map->count++;
- videobuf_queue_unlock(q);
}
static void videobuf_vm_close(struct vm_area_struct *vma)
@@ -85,11 +82,12 @@
dev_dbg(q->dev, "vm_close %p [count=%u,vma=%08lx-%08lx]\n",
map, map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
- if (!--map->count) {
+ map->count--;
+ if (0 == map->count) {
struct videobuf_dma_contig_memory *mem;
dev_dbg(q->dev, "munmap %p q=%p\n", map, q);
+ videobuf_queue_lock(q);
/* We need first to cancel streams, before unmapping */
if (q->streaming)
@@ -128,8 +126,8 @@
kfree(map);
+ videobuf_queue_unlock(q);
}
- videobuf_queue_unlock(q);
}
static const struct vm_operations_struct videobuf_vm_ops = {
diff --git a/drivers/media/v4l2-core/videobuf-dma-sg.c b/drivers/media/v4l2-core/videobuf-dma-sg.c
index 9db674c..828e7c1 100644
--- a/drivers/media/v4l2-core/videobuf-dma-sg.c
+++ b/drivers/media/v4l2-core/videobuf-dma-sg.c
@@ -338,14 +338,11 @@
static void videobuf_vm_open(struct vm_area_struct *vma)
{
struct videobuf_mapping *map = vma->vm_private_data;
- struct videobuf_queue *q = map->q;
dprintk(2, "vm_open %p [count=%d,vma=%08lx-%08lx]\n", map,
map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
map->count++;
- videobuf_queue_unlock(q);
}
static void videobuf_vm_close(struct vm_area_struct *vma)
@@ -358,9 +355,10 @@
dprintk(2, "vm_close %p [count=%d,vma=%08lx-%08lx]\n", map,
map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
- if (!--map->count) {
+ map->count--;
+ if (0 == map->count) {
dprintk(1, "munmap %p q=%p\n", map, q);
+ videobuf_queue_lock(q);
for (i = 0; i < VIDEO_MAX_FRAME; i++) {
if (NULL == q->bufs[i])
continue;
@@ -376,9 +374,9 @@
q->bufs[i]->baddr = 0;
q->ops->buf_release(q, q->bufs[i]);
}
+ videobuf_queue_unlock(q);
kfree(map);
}
- videobuf_queue_unlock(q);
return;
}
diff --git a/drivers/media/v4l2-core/videobuf-vmalloc.c b/drivers/media/v4l2-core/videobuf-vmalloc.c
index 1365c65..2ff7fcc 100644
--- a/drivers/media/v4l2-core/videobuf-vmalloc.c
+++ b/drivers/media/v4l2-core/videobuf-vmalloc.c
@@ -54,14 +54,11 @@
static void videobuf_vm_open(struct vm_area_struct *vma)
{
struct videobuf_mapping *map = vma->vm_private_data;
- struct videobuf_queue *q = map->q;
dprintk(2, "vm_open %p [count=%u,vma=%08lx-%08lx]\n", map,
map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
map->count++;
- videobuf_queue_unlock(q);
}
static void videobuf_vm_close(struct vm_area_struct *vma)
@@ -73,11 +70,12 @@
dprintk(2, "vm_close %p [count=%u,vma=%08lx-%08lx]\n", map,
map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
- if (!--map->count) {
+ map->count--;
+ if (0 == map->count) {
struct videobuf_vmalloc_memory *mem;
dprintk(1, "munmap %p q=%p\n", map, q);
+ videobuf_queue_lock(q);
/* We need first to cancel streams, before unmapping */
if (q->streaming)
@@ -116,8 +114,8 @@
kfree(map);
+ videobuf_queue_unlock(q);
}
- videobuf_queue_unlock(q);
return;
}
diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
index 5a5fb7f..a127925 100644
--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -1776,6 +1776,11 @@
return 0;
}
+ if (!q->num_buffers) {
+ dprintk(1, "streamon: no buffers have been allocated\n");
+ return -EINVAL;
+ }
+
/*
* If any buffers were queued before streamon,
* we can now pass them to driver for processing.
diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index a60c188..04bd3b6 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -754,19 +754,19 @@
unsigned long arg)
{
int ret;
- mutex_lock(&i2o_cfg_mutex);
switch (cmd) {
case I2OGETIOPS:
ret = i2o_cfg_ioctl(file, cmd, arg);
break;
case I2OPASSTHRU32:
+ mutex_lock(&i2o_cfg_mutex);
ret = i2o_cfg_passthru32(file, cmd, arg);
+ mutex_unlock(&i2o_cfg_mutex);
break;
default:
ret = -ENOIOCTLCMD;
break;
}
- mutex_unlock(&i2o_cfg_mutex);
return ret;
}
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index aaff683..a8ee4a3 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -592,7 +592,7 @@
/* If ->irq_base is zero this will give a linear mapping */
ab8500->domain = irq_domain_add_simple(NULL,
- num_irqs, ab8500->irq_base,
+ num_irqs, 0,
&ab8500_irq_ops, ab8500);
if (!ab8500->domain) {
@@ -1583,14 +1583,13 @@
if (!ab8500)
return -ENOMEM;
- if (plat)
- ab8500->irq_base = plat->irq_base;
-
ab8500->dev = &pdev->dev;
resource = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!resource)
+ if (!resource) {
+ dev_err(&pdev->dev, "no IRQ resource\n");
return -ENODEV;
+ }
ab8500->irq = resource->start;
@@ -1612,8 +1611,10 @@
else {
ret = get_register_interruptible(ab8500, AB8500_MISC,
AB8500_IC_NAME_REG, &value);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not probe HW\n");
return ret;
+ }
ab8500->version = value;
}
@@ -1759,30 +1760,30 @@
if (is_ab9540(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
ARRAY_SIZE(ab9540_devs), NULL,
- ab8500->irq_base, ab8500->domain);
+ 0, ab8500->domain);
else if (is_ab8540(ab8500)) {
ret = mfd_add_devices(ab8500->dev, 0, ab8540_devs,
ARRAY_SIZE(ab8540_devs), NULL,
- ab8500->irq_base, NULL);
+ 0, ab8500->domain);
if (ret)
return ret;
if (is_ab8540_1p2_or_earlier(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab8540_cut1_devs,
ARRAY_SIZE(ab8540_cut1_devs), NULL,
- ab8500->irq_base, NULL);
+ 0, ab8500->domain);
else /* ab8540 >= cut2 */
ret = mfd_add_devices(ab8500->dev, 0, ab8540_cut2_devs,
ARRAY_SIZE(ab8540_cut2_devs), NULL,
- ab8500->irq_base, NULL);
+ 0, ab8500->domain);
} else if (is_ab8505(ab8500))
ret = mfd_add_devices(ab8500->dev, 0, ab8505_devs,
ARRAY_SIZE(ab8505_devs), NULL,
- ab8500->irq_base, ab8500->domain);
+ 0, ab8500->domain);
else
ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
ARRAY_SIZE(ab8500_devs), NULL,
- ab8500->irq_base, ab8500->domain);
+ 0, ab8500->domain);
if (ret)
return ret;
@@ -1790,7 +1791,7 @@
/* Add battery management devices */
ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
ARRAY_SIZE(ab8500_bm_devs), NULL,
- ab8500->irq_base, ab8500->domain);
+ 0, ab8500->domain);
if (ret)
dev_err(ab8500->dev, "error adding bm devices\n");
}
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index e43e6e8..7694e07 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -25,6 +25,7 @@
#include <linux/bitops.h>
#include <linux/fs.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/mfd/core.h>
@@ -2678,16 +2679,12 @@
.xlate = irq_domain_xlate_twocell,
};
-static int db8500_irq_init(struct device_node *np, int irq_base)
+static int db8500_irq_init(struct device_node *np)
{
int i;
- /* In the device tree case, just take some IRQs */
- if (np)
- irq_base = 0;
-
db8500_irq_domain = irq_domain_add_simple(
- np, NUM_PRCMU_WAKEUPS, irq_base,
+ np, NUM_PRCMU_WAKEUPS, 0,
&db8500_irq_ops, NULL);
if (!db8500_irq_domain) {
@@ -3114,10 +3111,10 @@
}
static int db8500_prcmu_register_ab8500(struct device *parent,
- struct ab8500_platform_data *pdata,
- int irq)
+ struct ab8500_platform_data *pdata)
{
- struct resource ab8500_resource = DEFINE_RES_IRQ(irq);
+ struct device_node *np;
+ struct resource ab8500_resource;
struct mfd_cell ab8500_cell = {
.name = "ab8500-core",
.of_compatible = "stericsson,ab8500",
@@ -3128,6 +3125,20 @@
.num_resources = 1,
};
+ if (!parent->of_node)
+ return -ENODEV;
+
+ /* Look up the device node, sneak the IRQ out of it */
+ for_each_child_of_node(parent->of_node, np) {
+ if (of_device_is_compatible(np, ab8500_cell.of_compatible))
+ break;
+ }
+ if (!np) {
+ dev_info(parent, "could not find AB8500 node in the device tree\n");
+ return -ENODEV;
+ }
+ of_irq_to_resource_table(np, &ab8500_resource, 1);
+
return mfd_add_devices(parent, 0, &ab8500_cell, 1, NULL, 0, NULL);
}
@@ -3180,7 +3191,7 @@
goto no_irq_return;
}
- db8500_irq_init(np, pdata->irq_base);
+ db8500_irq_init(np);
prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
@@ -3205,8 +3216,7 @@
}
}
- err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata,
- pdata->ab_irq);
+ err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata);
if (err) {
mfd_remove_devices(&pdev->dev);
pr_err("prcmu: Failed to add ab8500 subdevice\n");
diff --git a/drivers/misc/genwqe/card_dev.c b/drivers/misc/genwqe/card_dev.c
index 8f8a6b3..2c2c9cc 100644
--- a/drivers/misc/genwqe/card_dev.c
+++ b/drivers/misc/genwqe/card_dev.c
@@ -787,6 +787,7 @@
if (rc != 0) {
dev_err(&pci_dev->dev,
"[%s] genwqe_user_vmap rc=%d\n", __func__, rc);
+ kfree(dma_map);
return rc;
}
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 1ee2b94..9b809cf 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -908,7 +908,6 @@
list_for_each_entry_safe(cl, next, &dev->file_list, link) {
cl->state = MEI_FILE_DISCONNECTED;
cl->mei_flow_ctrl_creds = 0;
- cl->read_cb = NULL;
cl->timer_count = 0;
}
}
@@ -942,8 +941,16 @@
void mei_cl_all_write_clear(struct mei_device *dev)
{
struct mei_cl_cb *cb, *next;
+ struct list_head *list;
- list_for_each_entry_safe(cb, next, &dev->write_list.list, list) {
+ list = &dev->write_list.list;
+ list_for_each_entry_safe(cb, next, list, list) {
+ list_del(&cb->list);
+ mei_io_cb_free(cb);
+ }
+
+ list = &dev->write_waiting_list.list;
+ list_for_each_entry_safe(cb, next, list, list) {
list_del(&cb->list);
mei_io_cb_free(cb);
}
diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c
index 752ff87..7e1ef0e 100644
--- a/drivers/misc/mic/host/mic_virtio.c
+++ b/drivers/misc/mic/host/mic_virtio.c
@@ -156,7 +156,8 @@
static int _mic_virtio_copy(struct mic_vdev *mvdev,
struct mic_copy_desc *copy)
{
- int ret = 0, iovcnt = copy->iovcnt;
+ int ret = 0;
+ u32 iovcnt = copy->iovcnt;
struct iovec iov;
struct iovec __user *u_iov = copy->iov;
void __user *ubuf = NULL;
diff --git a/drivers/misc/sgi-gru/grukdump.c b/drivers/misc/sgi-gru/grukdump.c
index 9b2062d..2bef3f7 100644
--- a/drivers/misc/sgi-gru/grukdump.c
+++ b/drivers/misc/sgi-gru/grukdump.c
@@ -139,8 +139,11 @@
ubuf += sizeof(hdr);
ubufcch = ubuf;
- if (gru_user_copy_handle(&ubuf, cch))
- goto fail;
+ if (gru_user_copy_handle(&ubuf, cch)) {
+ if (cch_locked)
+ unlock_cch_handle(cch);
+ return -EFAULT;
+ }
if (cch_locked)
ubufcch->delresp = 0;
bytes = sizeof(hdr) + GRU_CACHE_LINE_BYTES;
@@ -179,10 +182,6 @@
ret = -EFAULT;
return ret ? ret : bytes;
-
-fail:
- unlock_cch_handle(cch);
- return -EFAULT;
}
int gru_dump_chiplet_request(unsigned long arg)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 4c08018..71ba18e 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1270,9 +1270,13 @@
if (slave_ops->ndo_set_mac_address == NULL) {
if (!bond_has_slaves(bond)) {
- pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.",
- bond_dev->name);
- bond->params.fail_over_mac = BOND_FOM_ACTIVE;
+ pr_warn("%s: Warning: The first slave device specified does not support setting the MAC address.\n",
+ bond_dev->name);
+ if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
+ bond->params.fail_over_mac = BOND_FOM_ACTIVE;
+ pr_warn("%s: Setting fail_over_mac to active for active-backup mode.\n",
+ bond_dev->name);
+ }
} else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n",
bond_dev->name);
@@ -1315,7 +1319,8 @@
*/
memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);
- if (!bond->params.fail_over_mac) {
+ if (!bond->params.fail_over_mac ||
+ bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
/*
* Set slave to master's mac address. The application already
* set the master's mac address to that of the first slave
@@ -1505,7 +1510,6 @@
slave_dev->npinfo = bond->dev->npinfo;
if (slave_dev->npinfo) {
if (slave_enable_netpoll(new_slave)) {
- read_unlock(&bond->lock);
pr_info("Error, %s: master_dev is using netpoll, "
"but new slave device does not support netpoll.\n",
bond_dev->name);
@@ -1579,7 +1583,8 @@
dev_close(slave_dev);
err_restore_mac:
- if (!bond->params.fail_over_mac) {
+ if (!bond->params.fail_over_mac ||
+ bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
/* XXX TODO - fom follow mode needs to change master's
* MAC if this slave's MAC is in use by the bond, or at
* least print a warning.
@@ -1672,7 +1677,8 @@
bond->current_arp_slave = NULL;
- if (!all && !bond->params.fail_over_mac) {
+ if (!all && (!bond->params.fail_over_mac ||
+ bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) &&
bond_has_slaves(bond))
pr_warn("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
@@ -1769,7 +1775,8 @@
/* close slave before restoring its mac address */
dev_close(slave_dev);
- if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
+ if (bond->params.fail_over_mac != BOND_FOM_ACTIVE ||
+ bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
/* restore original ("permanent") mac address */
memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
addr.sa_family = slave_dev->type;
@@ -3431,7 +3438,8 @@
/* If fail_over_mac is enabled, do nothing and return success.
* Returning an error causes ifenslave to fail.
*/
- if (bond->params.fail_over_mac)
+ if (bond->params.fail_over_mac &&
+ bond->params.mode == BOND_MODE_ACTIVEBACKUP)
return 0;
if (!is_valid_ether_addr(sa->sa_data))
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index d447b88..9e7d95d 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -104,7 +104,7 @@
config CAN_FLEXCAN
tristate "Support for Freescale FLEXCAN based chips"
- depends on (ARM && CPU_LITTLE_ENDIAN) || PPC
+ depends on ARM || PPC
---help---
Say Y here if you want to support for Freescale FlexCAN.
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 13a9098..fc59bc6 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -323,19 +323,10 @@
}
if (!priv->echo_skb[idx]) {
- struct sock *srcsk = skb->sk;
- if (atomic_read(&skb->users) != 1) {
- struct sk_buff *old_skb = skb;
-
- skb = skb_clone(old_skb, GFP_ATOMIC);
- kfree_skb(old_skb);
- if (!skb)
- return;
- } else
- skb_orphan(skb);
-
- skb->sk = srcsk;
+ skb = can_create_echo_skb(skb);
+ if (!skb)
+ return;
/* make settings for echo to reduce code in irq context */
skb->protocol = htons(ETH_P_CAN);
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index aaed97b..320bef2 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -235,9 +235,12 @@
};
/*
- * Abstract off the read/write for arm versus ppc.
+ * Abstract off the read/write for arm versus ppc. This
+ * assumes that PPC uses big-endian registers and everything
+ * else uses little-endian registers, independent of CPU
+ * endianess.
*/
-#if defined(__BIG_ENDIAN)
+#if defined(CONFIG_PPC)
static inline u32 flexcan_read(void __iomem *addr)
{
return in_be32(addr);
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index e24e669..71594e5 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -18,6 +18,7 @@
#include <linux/netdevice.h>
#include <linux/can.h>
#include <linux/can/dev.h>
+#include <linux/can/skb.h>
#include <linux/can/error.h>
#include <linux/mfd/janz.h>
@@ -1133,20 +1134,9 @@
*/
static void ican3_put_echo_skb(struct ican3_dev *mod, struct sk_buff *skb)
{
- struct sock *srcsk = skb->sk;
-
- if (atomic_read(&skb->users) != 1) {
- struct sk_buff *old_skb = skb;
-
- skb = skb_clone(old_skb, GFP_ATOMIC);
- kfree_skb(old_skb);
- if (!skb)
- return;
- } else {
- skb_orphan(skb);
- }
-
- skb->sk = srcsk;
+ skb = can_create_echo_skb(skb);
+ if (!skb)
+ return;
/* save this skb for tx interrupt echo handling */
skb_queue_tail(&mod->echoq, skb);
@@ -1322,7 +1312,7 @@
/* process all communication messages */
while (true) {
- struct ican3_msg msg;
+ struct ican3_msg uninitialized_var(msg);
ret = ican3_recv_msg(mod, &msg);
if (ret)
break;
diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c
index 0a2a5ee..4e94057 100644
--- a/drivers/net/can/vcan.c
+++ b/drivers/net/can/vcan.c
@@ -46,6 +46,7 @@
#include <linux/if_ether.h>
#include <linux/can.h>
#include <linux/can/dev.h>
+#include <linux/can/skb.h>
#include <linux/slab.h>
#include <net/rtnetlink.h>
@@ -109,25 +110,23 @@
stats->rx_packets++;
stats->rx_bytes += cfd->len;
}
- kfree_skb(skb);
+ consume_skb(skb);
return NETDEV_TX_OK;
}
/* perform standard echo handling for CAN network interfaces */
if (loop) {
- struct sock *srcsk = skb->sk;
- skb = skb_share_check(skb, GFP_ATOMIC);
+ skb = can_create_echo_skb(skb);
if (!skb)
return NETDEV_TX_OK;
/* receive with packet counting */
- skb->sk = srcsk;
vcan_rx(skb, dev);
} else {
/* no looped packets => no counting */
- kfree_skb(skb);
+ consume_skb(skb);
}
return NETDEV_TX_OK;
}
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 0f4241c..238ccea 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -3294,7 +3294,6 @@
static void __exit vortex_eisa_cleanup(void)
{
- struct vortex_private *vp;
void __iomem *ioaddr;
#ifdef CONFIG_EISA
@@ -3303,7 +3302,6 @@
#endif
if (compaq_net_device) {
- vp = netdev_priv(compaq_net_device);
ioaddr = ioport_map(compaq_net_device->base_addr,
VORTEX_TOTAL_SIZE);
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 0cc2143..511f6ee 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -929,6 +929,9 @@
}
static const struct of_device_id emac_of_match[] = {
+ {.compatible = "allwinner,sun4i-a10-emac",},
+
+ /* Deprecated */
{.compatible = "allwinner,sun4i-emac",},
{},
};
diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index e92ffd6..2e45f6e 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -1292,6 +1292,7 @@
alx = netdev_priv(netdev);
spin_lock_init(&alx->hw.mdio_lock);
spin_lock_init(&alx->irq_lock);
+ spin_lock_init(&alx->stats_lock);
alx->dev = netdev;
alx->hw.pdev = pdev;
alx->msg_enable = NETIF_MSG_LINK | NETIF_MSG_HW | NETIF_MSG_IFUP |
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 9d2deda..cda25ac 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -85,7 +85,7 @@
static int disable_msi = 0;
-module_param(disable_msi, int, 0);
+module_param(disable_msi, int, S_IRUGO);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
typedef enum {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 17d1689..bfc58d4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -936,7 +936,7 @@
else /* CHIP_IS_E1X */
start_params->network_cos_mode = FW_WRR;
- start_params->gre_tunnel_mode = IPGRE_TUNNEL;
+ start_params->gre_tunnel_mode = L2GRE_TUNNEL;
start_params->gre_tunnel_rss = GRE_INNER_HEADERS_RSS;
return bnx2x_func_state_change(bp, &func_params);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c9c445e..7d43822 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -95,29 +95,29 @@
MODULE_FIRMWARE(FW_FILE_NAME_E2);
int bnx2x_num_queues;
-module_param_named(num_queues, bnx2x_num_queues, int, 0);
+module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO);
MODULE_PARM_DESC(num_queues,
" Set number of queues (default is as a number of CPUs)");
static int disable_tpa;
-module_param(disable_tpa, int, 0);
+module_param(disable_tpa, int, S_IRUGO);
MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
static int int_mode;
-module_param(int_mode, int, 0);
+module_param(int_mode, int, S_IRUGO);
MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
"(1 INT#x; 2 MSI)");
static int dropless_fc;
-module_param(dropless_fc, int, 0);
+module_param(dropless_fc, int, S_IRUGO);
MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
static int mrrs = -1;
-module_param(mrrs, int, 0);
+module_param(mrrs, int, S_IRUGO);
MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
static int debug;
-module_param(debug, int, 0);
+module_param(debug, int, S_IRUGO);
MODULE_PARM_DESC(debug, " Default debug msglevel");
struct workqueue_struct *bnx2x_wq;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index aec5ef2..e42f48d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1446,12 +1446,12 @@
if (vf->cfg_flags & VF_CFG_INT_SIMD)
val |= IGU_VF_CONF_SINGLE_ISR_EN;
val &= ~IGU_VF_CONF_PARENT_MASK;
- val |= BP_FUNC(bp) << IGU_VF_CONF_PARENT_SHIFT; /* parent PF */
+ val |= (BP_ABS_FUNC(bp) >> 1) << IGU_VF_CONF_PARENT_SHIFT;
REG_WR(bp, IGU_REG_VF_CONFIGURATION, val);
DP(BNX2X_MSG_IOV,
- "value in IGU_REG_VF_CONFIGURATION of vf %d after write %x\n",
- vf->abs_vfid, REG_RD(bp, IGU_REG_VF_CONFIGURATION));
+ "value in IGU_REG_VF_CONFIGURATION of vf %d after write is 0x%08x\n",
+ vf->abs_vfid, val);
bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index e2ca03e..3167ed6 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -2609,13 +2609,14 @@
tg3_writephy(tp, MII_CTRL1000, phy9_orig);
- if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32)) {
- reg32 &= ~0x3000;
- tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
- } else if (!err)
- err = -EBUSY;
+ err = tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32);
+ if (err)
+ return err;
- return err;
+ reg32 &= ~0x3000;
+ tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
+
+ return 0;
}
static void tg3_carrier_off(struct tg3 *tp)
@@ -14113,12 +14114,12 @@
tg3_netif_stop(tp);
+ tg3_set_mtu(dev, tp, new_mtu);
+
tg3_full_lock(tp, 1);
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
- tg3_set_mtu(dev, tp, new_mtu);
-
/* Reset PHY, otherwise the read DMA engine will be in a mode that
* breaks all requests to 256 bytes.
*/
diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c
index 4de8cfd..55e0fa0 100644
--- a/drivers/net/ethernet/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -13,6 +13,7 @@
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
+#include <linux/clk.h>
#include <linux/crc32.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -51,6 +52,7 @@
#define ETH_HASH0 0x48
#define ETH_HASH1 0x4c
#define ETH_TXCTRL 0x50
+#define ETH_END 0x54
/* mode register */
#define MODER_RXEN (1 << 0) /* receive enable */
@@ -179,6 +181,7 @@
* @membase: pointer to buffer memory region
* @dma_alloc: dma allocated buffer size
* @io_region_size: I/O memory region size
+ * @num_bd: number of buffer descriptors
* @num_tx: number of send buffers
* @cur_tx: last send buffer written
* @dty_tx: last buffer actually sent
@@ -199,6 +202,7 @@
int dma_alloc;
resource_size_t io_region_size;
+ unsigned int num_bd;
unsigned int num_tx;
unsigned int cur_tx;
unsigned int dty_tx;
@@ -216,6 +220,7 @@
struct phy_device *phy;
struct mii_bus *mdio;
+ struct clk *clk;
s8 phy_id;
};
@@ -688,6 +693,11 @@
}
priv->phy = phy;
+ phy->advertising &= ~(ADVERTISED_1000baseT_Full |
+ ADVERTISED_1000baseT_Half);
+ phy->supported &= ~(SUPPORTED_1000baseT_Full |
+ SUPPORTED_1000baseT_Half);
+
return 0;
}
@@ -890,6 +900,102 @@
return NETDEV_TX_OK;
}
+static int ethoc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ethoc *priv = netdev_priv(dev);
+ struct phy_device *phydev = priv->phy;
+
+ if (!phydev)
+ return -EOPNOTSUPP;
+
+ return phy_ethtool_gset(phydev, cmd);
+}
+
+static int ethoc_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ethoc *priv = netdev_priv(dev);
+ struct phy_device *phydev = priv->phy;
+
+ if (!phydev)
+ return -EOPNOTSUPP;
+
+ return phy_ethtool_sset(phydev, cmd);
+}
+
+static int ethoc_get_regs_len(struct net_device *netdev)
+{
+ return ETH_END;
+}
+
+static void ethoc_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct ethoc *priv = netdev_priv(dev);
+ u32 *regs_buff = p;
+ unsigned i;
+
+ regs->version = 0;
+ for (i = 0; i < ETH_END / sizeof(u32); ++i)
+ regs_buff[i] = ethoc_read(priv, i * sizeof(u32));
+}
+
+static void ethoc_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ring)
+{
+ struct ethoc *priv = netdev_priv(dev);
+
+ ring->rx_max_pending = priv->num_bd - 1;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->tx_max_pending = priv->num_bd - 1;
+
+ ring->rx_pending = priv->num_rx;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+ ring->tx_pending = priv->num_tx;
+}
+
+static int ethoc_set_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ring)
+{
+ struct ethoc *priv = netdev_priv(dev);
+
+ if (ring->tx_pending < 1 || ring->rx_pending < 1 ||
+ ring->tx_pending + ring->rx_pending > priv->num_bd)
+ return -EINVAL;
+ if (ring->rx_mini_pending || ring->rx_jumbo_pending)
+ return -EINVAL;
+
+ if (netif_running(dev)) {
+ netif_tx_disable(dev);
+ ethoc_disable_rx_and_tx(priv);
+ ethoc_disable_irq(priv, INT_MASK_TX | INT_MASK_RX);
+ synchronize_irq(dev->irq);
+ }
+
+ priv->num_tx = rounddown_pow_of_two(ring->tx_pending);
+ priv->num_rx = ring->rx_pending;
+ ethoc_init_ring(priv, dev->mem_start);
+
+ if (netif_running(dev)) {
+ ethoc_enable_irq(priv, INT_MASK_TX | INT_MASK_RX);
+ ethoc_enable_rx_and_tx(priv);
+ netif_wake_queue(dev);
+ }
+ return 0;
+}
+
+const struct ethtool_ops ethoc_ethtool_ops = {
+ .get_settings = ethoc_get_settings,
+ .set_settings = ethoc_set_settings,
+ .get_regs_len = ethoc_get_regs_len,
+ .get_regs = ethoc_get_regs,
+ .get_link = ethtool_op_get_link,
+ .get_ringparam = ethoc_get_ringparam,
+ .set_ringparam = ethoc_set_ringparam,
+ .get_ts_info = ethtool_op_get_ts_info,
+};
+
static const struct net_device_ops ethoc_netdev_ops = {
.ndo_open = ethoc_open,
.ndo_stop = ethoc_stop,
@@ -917,6 +1023,8 @@
int num_bd;
int ret = 0;
bool random_mac = false;
+ struct ethoc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ u32 eth_clkfreq = pdata ? pdata->eth_clkfreq : 0;
/* allocate networking device */
netdev = alloc_etherdev(sizeof(struct ethoc));
@@ -1016,6 +1124,7 @@
ret = -ENODEV;
goto error;
}
+ priv->num_bd = num_bd;
/* num_tx must be a power of two */
priv->num_tx = rounddown_pow_of_two(num_bd >> 1);
priv->num_rx = num_bd - priv->num_tx;
@@ -1030,8 +1139,7 @@
}
/* Allow the platform setup code to pass in a MAC address. */
- if (dev_get_platdata(&pdev->dev)) {
- struct ethoc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ if (pdata) {
memcpy(netdev->dev_addr, pdata->hwaddr, IFHWADDRLEN);
priv->phy_id = pdata->phy_id;
} else {
@@ -1069,6 +1177,27 @@
if (random_mac)
netdev->addr_assign_type = NET_ADDR_RANDOM;
+ /* Allow the platform setup code to adjust MII management bus clock. */
+ if (!eth_clkfreq) {
+ struct clk *clk = devm_clk_get(&pdev->dev, NULL);
+
+ if (!IS_ERR(clk)) {
+ priv->clk = clk;
+ clk_prepare_enable(clk);
+ eth_clkfreq = clk_get_rate(clk);
+ }
+ }
+ if (eth_clkfreq) {
+ u32 clkdiv = MIIMODER_CLKDIV(eth_clkfreq / 2500000 + 1);
+
+ if (!clkdiv)
+ clkdiv = 2;
+ dev_dbg(&pdev->dev, "setting MII clkdiv to %u\n", clkdiv);
+ ethoc_write(priv, MIIMODER,
+ (ethoc_read(priv, MIIMODER) & MIIMODER_NOPRE) |
+ clkdiv);
+ }
+
/* register MII bus */
priv->mdio = mdiobus_alloc();
if (!priv->mdio) {
@@ -1111,6 +1240,7 @@
netdev->netdev_ops = ðoc_netdev_ops;
netdev->watchdog_timeo = ETHOC_TIMEOUT;
netdev->features |= 0;
+ netdev->ethtool_ops = ðoc_ethtool_ops;
/* setup NAPI */
netif_napi_add(netdev, &priv->napi, ethoc_poll, 64);
@@ -1133,6 +1263,8 @@
kfree(priv->mdio->irq);
mdiobus_free(priv->mdio);
free:
+ if (priv->clk)
+ clk_disable_unprepare(priv->clk);
free_netdev(netdev);
out:
return ret;
@@ -1157,6 +1289,8 @@
kfree(priv->mdio->irq);
mdiobus_free(priv->mdio);
}
+ if (priv->clk)
+ clk_disable_unprepare(priv->clk);
unregister_netdev(netdev);
free_netdev(netdev);
}
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index cbaba44..bf7a01e 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -3034,7 +3034,7 @@
*enable_wake = false;
}
- pci_disable_device(pdev);
+ pci_clear_master(pdev);
}
static int __e100_power_off(struct pci_dev *pdev, bool wake)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index 157fe8d..8ff57e8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -4,5 +4,5 @@
config MLX5_CORE
tristate
- depends on PCI && X86
+ depends on PCI
default n
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index 1ded50ca..e46e869 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -726,9 +726,6 @@
int vpath_idx = 0;
enum vxge_hw_status status = VXGE_HW_OK;
struct vxge_vpath *vpath = NULL;
- struct __vxge_hw_device *hldev;
-
- hldev = pci_get_drvdata(vdev->pdev);
mac_address = (u8 *)&mac_addr;
memcpy(mac_address, mac_header, ETH_ALEN);
@@ -2443,9 +2440,6 @@
static void vxge_rem_isr(struct vxgedev *vdev)
{
- struct __vxge_hw_device *hldev;
- hldev = pci_get_drvdata(vdev->pdev);
-
#ifdef CONFIG_PCI_MSI
if (vdev->config.intr_type == MSI_X) {
vxge_rem_msix_isr(vdev);
diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c
index c49d1fb..75d11fa 100644
--- a/drivers/net/ethernet/sfc/tx.c
+++ b/drivers/net/ethernet/sfc/tx.c
@@ -429,7 +429,9 @@
}
/* Transfer ownership of the skb to the final buffer */
+#ifdef EFX_USE_PIO
finish_packet:
+#endif
buffer->skb = skb;
buffer->flags = EFX_TX_BUF_SKB | dma_flags;
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index bde63e3..1d860ce 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1878,8 +1878,18 @@
mdio_node = of_find_node_by_phandle(be32_to_cpup(parp));
phyid = be32_to_cpup(parp+1);
mdio = of_find_device_by_node(mdio_node);
- snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
- PHY_ID_FMT, mdio->name, phyid);
+
+ if (strncmp(mdio->name, "gpio", 4) == 0) {
+ /* GPIO bitbang MDIO driver attached */
+ struct mii_bus *bus = dev_get_drvdata(&mdio->dev);
+
+ snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
+ PHY_ID_FMT, bus->id, phyid);
+ } else {
+ /* davinci MDIO driver attached */
+ snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
+ PHY_ID_FMT, mdio->name, phyid);
+ }
mac_addr = of_get_mac_address(slave_node);
if (mac_addr)
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 2dc82f1..3da44d5 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -210,13 +210,6 @@
To compile it as a module, choose M here: the module will be called
kingsun-sir.
-config EP7211_DONGLE
- tristate "Cirrus Logic clps711x I/R support"
- depends on IRTTY_SIR && ARCH_CLPS711X && IRDA
- help
- Say Y here if you want to build support for the Cirrus logic
- EP7211 chipset's infrared module.
-
config KSDAZZLE_DONGLE
tristate "KingSun Dazzle IrDA-USB dongle"
depends on IRDA && USB
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index dfc6453..be8ab5b 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -35,7 +35,6 @@
obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o
obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o
obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o
-obj-$(CONFIG_EP7211_DONGLE) += ep7211-sir.o
obj-$(CONFIG_KINGSUN_DONGLE) += kingsun-sir.o
obj-$(CONFIG_KSDAZZLE_DONGLE) += ksdazzle-sir.o
obj-$(CONFIG_KS959_DONGLE) += ks959-sir.o
diff --git a/drivers/net/irda/ep7211-sir.c b/drivers/net/irda/ep7211-sir.c
deleted file mode 100644
index 5fe1f4d..0000000
--- a/drivers/net/irda/ep7211-sir.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * IR port driver for the Cirrus Logic CLPS711X processors
- *
- * Copyright 2001, Blue Mug Inc. All rights reserved.
- * Copyright 2007, Samuel Ortiz <samuel@sortiz.org>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-
-#include "sir-dev.h"
-
-static int clps711x_dongle_open(struct sir_dev *dev)
-{
- unsigned int syscon;
-
- /* Turn on the SIR encoder. */
- syscon = clps_readl(SYSCON1);
- syscon |= SYSCON1_SIREN;
- clps_writel(syscon, SYSCON1);
-
- return 0;
-}
-
-static int clps711x_dongle_close(struct sir_dev *dev)
-{
- unsigned int syscon;
-
- /* Turn off the SIR encoder. */
- syscon = clps_readl(SYSCON1);
- syscon &= ~SYSCON1_SIREN;
- clps_writel(syscon, SYSCON1);
-
- return 0;
-}
-
-static struct dongle_driver clps711x_dongle = {
- .owner = THIS_MODULE,
- .driver_name = "EP7211 IR driver",
- .type = IRDA_EP7211_DONGLE,
- .open = clps711x_dongle_open,
- .close = clps711x_dongle_close,
-};
-
-static int clps711x_sir_probe(struct platform_device *pdev)
-{
- return irda_register_dongle(&clps711x_dongle);
-}
-
-static int clps711x_sir_remove(struct platform_device *pdev)
-{
- return irda_unregister_dongle(&clps711x_dongle);
-}
-
-static struct platform_driver clps711x_sir_driver = {
- .driver = {
- .name = "sir-clps711x",
- .owner = THIS_MODULE,
- },
- .probe = clps711x_sir_probe,
- .remove = clps711x_sir_remove,
-};
-module_platform_driver(clps711x_sir_driver);
-
-MODULE_AUTHOR("Samuel Ortiz <samuel@sortiz.org>");
-MODULE_DESCRIPTION("EP7211 IR dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-13"); /* IRDA_EP7211_DONGLE */
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 547725f..9414fa2 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -437,7 +437,10 @@
if (on) {
gpio_num = gpio_tab[EXTTS0_GPIO + index];
evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
- evnt |= EVNT_RISE;
+ if (rq->extts.flags & PTP_FALLING_EDGE)
+ evnt |= EVNT_FALL;
+ else
+ evnt |= EVNT_RISE;
}
ext_write(0, phydev, PAGE5, PTP_EVNT, evnt);
return 0;
@@ -1058,6 +1061,13 @@
kfree(dp83640);
}
+static int dp83640_config_init(struct phy_device *phydev)
+{
+ enable_status_frames(phydev, true);
+ ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE);
+ return 0;
+}
+
static int dp83640_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, MII_DP83640_MISR);
@@ -1195,11 +1205,6 @@
mutex_lock(&dp83640->clock->extreg_lock);
- if (dp83640->hwts_tx_en || dp83640->hwts_rx_en) {
- enable_status_frames(phydev, true);
- ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE);
- }
-
ext_write(0, phydev, PAGE5, PTP_TXCFG0, txcfg0);
ext_write(0, phydev, PAGE5, PTP_RXCFG0, rxcfg0);
@@ -1281,6 +1286,7 @@
}
/* fall through */
case HWTSTAMP_TX_ON:
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
skb_queue_tail(&dp83640->tx_queue, skb);
schedule_work(&dp83640->ts_work);
break;
@@ -1330,6 +1336,7 @@
.flags = PHY_HAS_INTERRUPT,
.probe = dp83640_probe,
.remove = dp83640_remove,
+ .config_init = dp83640_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = dp83640_ack_interrupt,
diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c
index bb88bc7..9367acc 100644
--- a/drivers/net/phy/mdio-sun4i.c
+++ b/drivers/net/phy/mdio-sun4i.c
@@ -170,6 +170,9 @@
}
static const struct of_device_id sun4i_mdio_dt_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-mdio" },
+
+ /* Deprecated */
{ .compatible = "allwinner,sun4i-mdio" },
{ }
};
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 4b03e63..82514e7 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -719,7 +719,7 @@
static int genphy_config_advert(struct phy_device *phydev)
{
u32 advertise;
- int oldadv, adv;
+ int oldadv, adv, bmsr;
int err, changed = 0;
/* Only allow advertising what this PHY supports */
@@ -744,26 +744,36 @@
changed = 1;
}
+ bmsr = phy_read(phydev, MII_BMSR);
+ if (bmsr < 0)
+ return bmsr;
+
+ /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
+ * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
+ * logical 1.
+ */
+ if (!(bmsr & BMSR_ESTATEN))
+ return changed;
+
/* Configure gigabit if it's supported */
+ adv = phy_read(phydev, MII_CTRL1000);
+ if (adv < 0)
+ return adv;
+
+ oldadv = adv;
+ adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+
if (phydev->supported & (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full)) {
- adv = phy_read(phydev, MII_CTRL1000);
- if (adv < 0)
- return adv;
-
- oldadv = adv;
- adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
-
- if (adv != oldadv) {
- err = phy_write(phydev, MII_CTRL1000, adv);
-
- if (err < 0)
- return err;
+ if (adv != oldadv)
changed = 1;
- }
}
+ err = phy_write(phydev, MII_CTRL1000, adv);
+ if (err < 0)
+ return err;
+
return changed;
}
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 6b638a0..409499f 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -292,6 +292,22 @@
This option adds support for CoreChip-sz SR9700 based USB 1.1
10/100 Ethernet adapters.
+config USB_NET_SR9800
+ tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
+ depends on USB_USBNET
+ select CRC32
+ default y
+ ---help---
+ Say Y if you want to use one of the following 100Mbps USB Ethernet
+ device based on the CoreChip-sz SR9800 chip.
+
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on eth0, if it is the only ethernet device, or perhaps on
+ eth1, if you have a PCI or ISA ethernet card installed.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sr9800.
+
config USB_NET_SMSC75XX
tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
depends on USB_USBNET
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index b17b5e8..433f0a0 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
obj-$(CONFIG_USB_NET_SR9700) += sr9700.o
+obj-$(CONFIG_USB_NET_SR9800) += sr9800.o
obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 1a48234..660bd5e 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1201,16 +1201,18 @@
struct hso_serial *serial = urb->context;
int status = urb->status;
+ D4("\n--- Got serial_read_bulk callback %02x ---", status);
+
/* sanity check */
if (!serial) {
D1("serial == NULL");
return;
- } else if (status) {
+ }
+ if (status) {
handle_usb_error(status, __func__, serial->parent);
return;
}
- D4("\n--- Got serial_read_bulk callback %02x ---", status);
D1("Actual length = %d\n", urb->actual_length);
DUMP1(urb->transfer_buffer, urb->actual_length);
@@ -1218,25 +1220,13 @@
if (serial->port.count == 0)
return;
- if (status == 0) {
- if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
- fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
- /* Valid data, handle RX data */
- spin_lock(&serial->serial_lock);
- serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
- put_rxbuf_data_and_resubmit_bulk_urb(serial);
- spin_unlock(&serial->serial_lock);
- } else if (status == -ENOENT || status == -ECONNRESET) {
- /* Unlinked - check for throttled port. */
- D2("Port %d, successfully unlinked urb", serial->minor);
- spin_lock(&serial->serial_lock);
- serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
- hso_resubmit_rx_bulk_urb(serial, urb);
- spin_unlock(&serial->serial_lock);
- } else {
- D2("Port %d, status = %d for read urb", serial->minor, status);
- return;
- }
+ if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
+ fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
+ /* Valid data, handle RX data */
+ spin_lock(&serial->serial_lock);
+ serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
+ put_rxbuf_data_and_resubmit_bulk_urb(serial);
+ spin_unlock(&serial->serial_lock);
}
/*
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 23bdd5b..ff5c871 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -712,6 +712,7 @@
{QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
{QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1270, 5)}, /* ZTE MF667 */
{QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */
{QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
@@ -723,6 +724,7 @@
{QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */
{QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */
{QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */
+ {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */
{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
{QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */
{QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index e8fac73..d89dbe3 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2273,15 +2273,6 @@
struct r8152 *tp = netdev_priv(netdev);
int res = 0;
- res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
- if (res) {
- if (res == -ENODEV)
- netif_device_detach(tp->netdev);
- netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
- res);
- return res;
- }
-
rtl8152_set_speed(tp, AUTONEG_ENABLE,
tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
DUPLEX_FULL);
@@ -2289,6 +2280,14 @@
netif_carrier_off(netdev);
netif_start_queue(netdev);
set_bit(WORK_ENABLE, &tp->flags);
+ res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+ if (res) {
+ if (res == -ENODEV)
+ netif_device_detach(tp->netdev);
+ netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
+ res);
+ }
+
return res;
}
@@ -2298,8 +2297,8 @@
struct r8152 *tp = netdev_priv(netdev);
int res = 0;
- usb_kill_urb(tp->intr_urb);
clear_bit(WORK_ENABLE, &tp->flags);
+ usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
netif_stop_queue(netdev);
tasklet_disable(&tp->tl);
diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c
new file mode 100644
index 0000000..4175eb9
--- /dev/null
+++ b/drivers/net/usb/sr9800.c
@@ -0,0 +1,870 @@
+/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * Based on asix_common.c, asix_devices.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.*
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/if_vlan.h>
+
+#include "sr9800.h"
+
+static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ int err;
+
+ err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index,
+ data, size);
+ if ((err != size) && (err >= 0))
+ err = -EINVAL;
+
+ return err;
+}
+
+static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ int err;
+
+ err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index,
+ data, size);
+ if ((err != size) && (err >= 0))
+ err = -EINVAL;
+
+ return err;
+}
+
+static void
+sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data,
+ size);
+}
+
+static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ int offset = 0;
+
+ while (offset + sizeof(u32) < skb->len) {
+ struct sk_buff *sr_skb;
+ u16 size;
+ u32 header = get_unaligned_le32(skb->data + offset);
+
+ offset += sizeof(u32);
+ /* get the packet length */
+ size = (u16) (header & 0x7ff);
+ if (size != ((~header >> 16) & 0x07ff)) {
+ netdev_err(dev->net, "%s : Bad Header Length\n",
+ __func__);
+ return 0;
+ }
+
+ if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
+ (size + offset > skb->len)) {
+ netdev_err(dev->net, "%s : Bad RX Length %d\n",
+ __func__, size);
+ return 0;
+ }
+ sr_skb = netdev_alloc_skb_ip_align(dev->net, size);
+ if (!sr_skb)
+ return 0;
+
+ skb_put(sr_skb, size);
+ memcpy(sr_skb->data, skb->data + offset, size);
+ usbnet_skb_return(dev, sr_skb);
+
+ offset += (size + 1) & 0xfffe;
+ }
+
+ if (skb->len != offset) {
+ netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__,
+ skb->len);
+ return 0;
+ }
+
+ return 1;
+}
+
+static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+ u32 padbytes = 0xffff0000;
+ u32 packet_len;
+ int padlen;
+
+ padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4;
+
+ if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) {
+ if ((headroom < 4) || (tailroom < padlen)) {
+ skb->data = memmove(skb->head + 4, skb->data,
+ skb->len);
+ skb_set_tail_pointer(skb, skb->len);
+ }
+ } else {
+ struct sk_buff *skb2;
+ skb2 = skb_copy_expand(skb, 4, padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ skb_push(skb, 4);
+ packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+ cpu_to_le32s(&packet_len);
+ skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
+
+ if (padlen) {
+ cpu_to_le32s(&padbytes);
+ memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
+ skb_put(skb, sizeof(padbytes));
+ }
+
+ return skb;
+}
+
+static void sr_status(struct usbnet *dev, struct urb *urb)
+{
+ struct sr9800_int_data *event;
+ int link;
+
+ if (urb->actual_length < 8)
+ return;
+
+ event = urb->transfer_buffer;
+ link = event->link & 0x01;
+ if (netif_carrier_ok(dev->net) != link) {
+ usbnet_link_change(dev, link, 1);
+ netdev_dbg(dev->net, "Link Status is: %d\n", link);
+ }
+
+ return;
+}
+
+static inline int sr_set_sw_mii(struct usbnet *dev)
+{
+ int ret;
+
+ ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net, "Failed to enable software MII access\n");
+ return ret;
+}
+
+static inline int sr_set_hw_mii(struct usbnet *dev)
+{
+ int ret;
+
+ ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net, "Failed to enable hardware MII access\n");
+ return ret;
+}
+
+static inline int sr_get_phy_addr(struct usbnet *dev)
+{
+ u8 buf[2];
+ int ret;
+
+ ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf);
+ if (ret < 0) {
+ netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n",
+ __func__, ret);
+ goto out;
+ }
+ netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__,
+ *((__le16 *)buf));
+
+ ret = buf[1];
+
+out:
+ return ret;
+}
+
+static int sr_sw_reset(struct usbnet *dev, u8 flags)
+{
+ int ret;
+
+ ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net, "Failed to send software reset:%02x\n",
+ ret);
+
+ return ret;
+}
+
+static u16 sr_read_rx_ctl(struct usbnet *dev)
+{
+ __le16 v;
+ int ret;
+
+ ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v);
+ if (ret < 0) {
+ netdev_err(dev->net, "Error reading RX_CTL register:%02x\n",
+ ret);
+ goto out;
+ }
+
+ ret = le16_to_cpu(v);
+out:
+ return ret;
+}
+
+static int sr_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+ int ret;
+
+ netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net,
+ "Failed to write RX_CTL mode to 0x%04x:%02x\n",
+ mode, ret);
+
+ return ret;
+}
+
+static u16 sr_read_medium_status(struct usbnet *dev)
+{
+ __le16 v;
+ int ret;
+
+ ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+ if (ret < 0) {
+ netdev_err(dev->net,
+ "Error reading Medium Status register:%02x\n", ret);
+ return ret; /* TODO: callers not checking for error ret */
+ }
+
+ return le16_to_cpu(v);
+}
+
+static int sr_write_medium_mode(struct usbnet *dev, u16 mode)
+{
+ int ret;
+
+ netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net,
+ "Failed to write Medium Mode mode to 0x%04x:%02x\n",
+ mode, ret);
+ return ret;
+}
+
+static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep)
+{
+ int ret;
+
+ netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value);
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n",
+ value, ret);
+ if (sleep)
+ msleep(sleep);
+
+ return ret;
+}
+
+/* SR9800 have a 16-bit RX_CTL value */
+static void sr_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sr_data *data = (struct sr_data *)&dev->data;
+ u16 rx_ctl = SR_DEFAULT_RX_CTL;
+
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= SR_RX_CTL_PRO;
+ } else if (net->flags & IFF_ALLMULTI ||
+ netdev_mc_count(net) > SR_MAX_MCAST) {
+ rx_ctl |= SR_RX_CTL_AMALL;
+ } else if (netdev_mc_empty(net)) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data
+ * for our 8 byte filter buffer
+ * to avoid allocating memory that
+ * is tricky to free later
+ */
+ struct netdev_hw_addr *ha;
+ u32 crc_bits;
+
+ memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE);
+
+ /* Build the multicast hash filter. */
+ netdev_for_each_mc_addr(ha, net) {
+ crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+ data->multi_filter[crc_bits >> 3] |=
+ 1 << (crc_bits & 7);
+ }
+
+ sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0,
+ SR_MCAST_FILTER_SIZE, data->multi_filter);
+
+ rx_ctl |= SR_RX_CTL_AM;
+ }
+
+ sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(net);
+ __le16 res;
+
+ mutex_lock(&dev->phy_mutex);
+ sr_set_sw_mii(dev);
+ sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res);
+ sr_set_hw_mii(dev);
+ mutex_unlock(&dev->phy_mutex);
+
+ netdev_dbg(dev->net,
+ "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__,
+ phy_id, loc, le16_to_cpu(res));
+
+ return le16_to_cpu(res);
+}
+
+static void
+sr_mdio_write(struct net_device *net, int phy_id, int loc, int val)
+{
+ struct usbnet *dev = netdev_priv(net);
+ __le16 res = cpu_to_le16(val);
+
+ netdev_dbg(dev->net,
+ "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__,
+ phy_id, loc, val);
+ mutex_lock(&dev->phy_mutex);
+ sr_set_sw_mii(dev);
+ sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
+ sr_set_hw_mii(dev);
+ mutex_unlock(&dev->phy_mutex);
+}
+
+/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
+static u32 sr_get_phyid(struct usbnet *dev)
+{
+ int phy_reg;
+ u32 phy_id;
+ int i;
+
+ /* Poll for the rare case the FW or phy isn't ready yet. */
+ for (i = 0; i < 100; i++) {
+ phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+ if (phy_reg != 0 && phy_reg != 0xFFFF)
+ break;
+ mdelay(1);
+ }
+
+ if (phy_reg <= 0 || phy_reg == 0xFFFF)
+ return 0;
+
+ phy_id = (phy_reg & 0xffff) << 16;
+
+ phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
+ if (phy_reg < 0)
+ return 0;
+
+ phy_id |= (phy_reg & 0xffff);
+
+ return phy_id;
+}
+
+static void
+sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt;
+
+ if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+ wolinfo->supported = 0;
+ wolinfo->wolopts = 0;
+ return;
+ }
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+ wolinfo->wolopts = 0;
+ if (opt & SR_MONITOR_LINK)
+ wolinfo->wolopts |= WAKE_PHY;
+ if (opt & SR_MONITOR_MAGIC)
+ wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int
+sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt = 0;
+
+ if (wolinfo->wolopts & WAKE_PHY)
+ opt |= SR_MONITOR_LINK;
+ if (wolinfo->wolopts & WAKE_MAGIC)
+ opt |= SR_MONITOR_MAGIC;
+
+ if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE,
+ opt, 0, 0, NULL) < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int sr_get_eeprom_len(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sr_data *data = (struct sr_data *)&dev->data;
+
+ return data->eeprom_len;
+}
+
+static int sr_get_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ __le16 *ebuf = (__le16 *)data;
+ int ret;
+ int i;
+
+ /* Crude hack to ensure that we don't overwrite memory
+ * if an odd length is supplied
+ */
+ if (eeprom->len % 2)
+ return -EINVAL;
+
+ eeprom->magic = SR_EEPROM_MAGIC;
+
+ /* sr9800 returns 2 bytes from eeprom on read */
+ for (i = 0; i < eeprom->len / 2; i++) {
+ ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i,
+ 0, 2, &ebuf[i]);
+ if (ret < 0)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void sr_get_drvinfo(struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sr_data *data = (struct sr_data *)&dev->data;
+
+ /* Inherit standard device info */
+ usbnet_get_drvinfo(net, info);
+ strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+ strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
+ info->eedump_len = data->eeprom_len;
+}
+
+static u32 sr_get_link(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_link_ok(&dev->mii);
+}
+
+static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static int sr_set_mac_address(struct net_device *net, void *p)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sr_data *data = (struct sr_data *)&dev->data;
+ struct sockaddr *addr = p;
+
+ if (netif_running(net))
+ return -EBUSY;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+ /* We use the 20 byte dev->data
+ * for our 6 byte mac buffer
+ * to avoid allocating memory that
+ * is tricky to free later
+ */
+ memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+ sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+ data->mac_addr);
+
+ return 0;
+}
+
+static const struct ethtool_ops sr9800_ethtool_ops = {
+ .get_drvinfo = sr_get_drvinfo,
+ .get_link = sr_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = sr_get_wol,
+ .set_wol = sr_set_wol,
+ .get_eeprom_len = sr_get_eeprom_len,
+ .get_eeprom = sr_get_eeprom,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+static int sr9800_link_reset(struct usbnet *dev)
+{
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+ u16 mode;
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ mode = SR9800_MEDIUM_DEFAULT;
+
+ if (ethtool_cmd_speed(&ecmd) != SPEED_100)
+ mode &= ~SR_MEDIUM_PS;
+
+ if (ecmd.duplex != DUPLEX_FULL)
+ mode &= ~SR_MEDIUM_FD;
+
+ netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n",
+ __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
+
+ sr_write_medium_mode(dev, mode);
+
+ return 0;
+}
+
+
+static int sr9800_set_default_mode(struct usbnet *dev)
+{
+ u16 rx_ctl;
+ int ret;
+
+ sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA);
+ mii_nway_restart(&dev->mii);
+
+ ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT);
+ if (ret < 0)
+ goto out;
+
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012,
+ SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT,
+ SR9800_IPG2_DEFAULT, 0, NULL);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+ goto out;
+ }
+
+ /* Set RX_CTL to default values with 2k buffer, and enable cactus */
+ ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL);
+ if (ret < 0)
+ goto out;
+
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+ rx_ctl);
+
+ rx_ctl = sr_read_medium_status(dev);
+ netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n",
+ rx_ctl);
+
+ return 0;
+out:
+ return ret;
+}
+
+static int sr9800_reset(struct usbnet *dev)
+{
+ struct sr_data *data = (struct sr_data *)&dev->data;
+ int ret, embd_phy;
+ u16 rx_ctl;
+
+ ret = sr_write_gpio(dev,
+ SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5);
+ if (ret < 0)
+ goto out;
+
+ embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+
+ ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+ goto out;
+ }
+
+ ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL);
+ if (ret < 0)
+ goto out;
+
+ msleep(150);
+
+ ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
+ if (ret < 0)
+ goto out;
+
+ msleep(150);
+
+ if (embd_phy) {
+ ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+ if (ret < 0)
+ goto out;
+ } else {
+ ret = sr_sw_reset(dev, SR_SWRESET_PRTE);
+ if (ret < 0)
+ goto out;
+ }
+
+ msleep(150);
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+ ret = sr_write_rx_ctl(dev, 0x0000);
+ if (ret < 0)
+ goto out;
+
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+ ret = sr_sw_reset(dev, SR_SWRESET_PRL);
+ if (ret < 0)
+ goto out;
+
+ msleep(150);
+
+ ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL);
+ if (ret < 0)
+ goto out;
+
+ msleep(150);
+
+ ret = sr9800_set_default_mode(dev);
+ if (ret < 0)
+ goto out;
+
+ /* Rewrite MAC address */
+ memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+ data->mac_addr);
+ if (ret < 0)
+ goto out;
+
+ return 0;
+
+out:
+ return ret;
+}
+
+static const struct net_device_ops sr9800_netdev_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = usbnet_change_mtu,
+ .ndo_set_mac_address = sr_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = sr_ioctl,
+ .ndo_set_rx_mode = sr_set_multicast,
+};
+
+static int sr9800_phy_powerup(struct usbnet *dev)
+{
+ int ret;
+
+ /* set the embedded Ethernet PHY in power-down state */
+ ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Failed to power down PHY : %d\n", ret);
+ return ret;
+ }
+ msleep(20);
+
+ /* set the embedded Ethernet PHY in power-up state */
+ ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
+ return ret;
+ }
+ msleep(600);
+
+ /* set the embedded Ethernet PHY in reset state */
+ ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
+ if (ret < 0) {
+ netdev_err(dev->net, "Failed to power up PHY: %d\n", ret);
+ return ret;
+ }
+ msleep(20);
+
+ /* set the embedded Ethernet PHY in power-up state */
+ ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct sr_data *data = (struct sr_data *)&dev->data;
+ u16 led01_mux, led23_mux;
+ int ret, embd_phy;
+ u32 phyid;
+ u16 rx_ctl;
+
+ data->eeprom_len = SR9800_EEPROM_LEN;
+
+ usbnet_get_endpoints(dev, intf);
+
+ /* LED Setting Rule :
+ * AABB:CCDD
+ * AA : MFA0(LED0)
+ * BB : MFA1(LED1)
+ * CC : MFA2(LED2), Reserved for SR9800
+ * DD : MFA3(LED3), Reserved for SR9800
+ */
+ led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK;
+ led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE;
+ ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL);
+ if (ret < 0) {
+ netdev_err(dev->net, "set LINK LED failed : %d\n", ret);
+ goto out;
+ }
+
+ /* Get the MAC address */
+ ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN,
+ dev->net->dev_addr);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
+ return ret;
+ }
+ netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr);
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = sr_mdio_read;
+ dev->mii.mdio_write = sr_mdio_write;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->mii.phy_id = sr_get_phy_addr(dev);
+
+ dev->net->netdev_ops = &sr9800_netdev_ops;
+ dev->net->ethtool_ops = &sr9800_ethtool_ops;
+
+ embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+ /* Reset the PHY to normal operation mode */
+ ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Init PHY routine */
+ ret = sr9800_phy_powerup(dev);
+ if (ret < 0)
+ goto out;
+
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+ ret = sr_write_rx_ctl(dev, 0x0000);
+ if (ret < 0)
+ goto out;
+
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+ /* Read PHYID register *AFTER* the PHY was reset properly */
+ phyid = sr_get_phyid(dev);
+ netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
+
+ /* medium mode setting */
+ ret = sr9800_set_default_mode(dev);
+ if (ret < 0)
+ goto out;
+
+ if (dev->udev->speed == USB_SPEED_HIGH) {
+ ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt,
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold,
+ 0, NULL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
+ goto out;
+ }
+ dev->rx_urb_size =
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size;
+ } else {
+ ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt,
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold,
+ 0, NULL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
+ goto out;
+ }
+ dev->rx_urb_size =
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size;
+ }
+ netdev_dbg(dev->net, "%s : setting rx_urb_size with : %ld\n", __func__,
+ dev->rx_urb_size);
+ return 0;
+
+out:
+ return ret;
+}
+
+static const struct driver_info sr9800_driver_info = {
+ .description = "CoreChip SR9800 USB 2.0 Ethernet",
+ .bind = sr9800_bind,
+ .status = sr_status,
+ .link_reset = sr9800_link_reset,
+ .reset = sr9800_reset,
+ .flags = DRIVER_FLAG,
+ .rx_fixup = sr_rx_fixup,
+ .tx_fixup = sr_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+ {
+ USB_DEVICE(0x0fe6, 0x9800), /* SR9800 Device */
+ .driver_info = (unsigned long) &sr9800_driver_info,
+ },
+ {}, /* END */
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver sr_driver = {
+ .name = DRIVER_NAME,
+ .id_table = products,
+ .probe = usbnet_probe,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disconnect = usbnet_disconnect,
+ .supports_autosuspend = 1,
+};
+
+module_usb_driver(sr_driver);
+
+MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/sr9800.h b/drivers/net/usb/sr9800.h
new file mode 100644
index 0000000..18f6702
--- /dev/null
+++ b/drivers/net/usb/sr9800.h
@@ -0,0 +1,202 @@
+/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef _SR9800_H
+#define _SR9800_H
+
+/* SR9800 spec. command table on Linux Platform */
+
+/* command : Software Station Management Control Reg */
+#define SR_CMD_SET_SW_MII 0x06
+/* command : PHY Read Reg */
+#define SR_CMD_READ_MII_REG 0x07
+/* command : PHY Write Reg */
+#define SR_CMD_WRITE_MII_REG 0x08
+/* command : Hardware Station Management Control Reg */
+#define SR_CMD_SET_HW_MII 0x0a
+/* command : SROM Read Reg */
+#define SR_CMD_READ_EEPROM 0x0b
+/* command : SROM Write Reg */
+#define SR_CMD_WRITE_EEPROM 0x0c
+/* command : SROM Write Enable Reg */
+#define SR_CMD_WRITE_ENABLE 0x0d
+/* command : SROM Write Disable Reg */
+#define SR_CMD_WRITE_DISABLE 0x0e
+/* command : RX Control Read Reg */
+#define SR_CMD_READ_RX_CTL 0x0f
+#define SR_RX_CTL_PRO (1 << 0)
+#define SR_RX_CTL_AMALL (1 << 1)
+#define SR_RX_CTL_SEP (1 << 2)
+#define SR_RX_CTL_AB (1 << 3)
+#define SR_RX_CTL_AM (1 << 4)
+#define SR_RX_CTL_AP (1 << 5)
+#define SR_RX_CTL_ARP (1 << 6)
+#define SR_RX_CTL_SO (1 << 7)
+#define SR_RX_CTL_RH1M (1 << 8)
+#define SR_RX_CTL_RH2M (1 << 9)
+#define SR_RX_CTL_RH3M (1 << 10)
+/* command : RX Control Write Reg */
+#define SR_CMD_WRITE_RX_CTL 0x10
+/* command : IPG0/IPG1/IPG2 Control Read Reg */
+#define SR_CMD_READ_IPG012 0x11
+/* command : IPG0/IPG1/IPG2 Control Write Reg */
+#define SR_CMD_WRITE_IPG012 0x12
+/* command : Node ID Read Reg */
+#define SR_CMD_READ_NODE_ID 0x13
+/* command : Node ID Write Reg */
+#define SR_CMD_WRITE_NODE_ID 0x14
+/* command : Multicast Filter Array Read Reg */
+#define SR_CMD_READ_MULTI_FILTER 0x15
+/* command : Multicast Filter Array Write Reg */
+#define SR_CMD_WRITE_MULTI_FILTER 0x16
+/* command : Eth/HomePNA PHY Address Reg */
+#define SR_CMD_READ_PHY_ID 0x19
+/* command : Medium Status Read Reg */
+#define SR_CMD_READ_MEDIUM_STATUS 0x1a
+#define SR_MONITOR_LINK (1 << 1)
+#define SR_MONITOR_MAGIC (1 << 2)
+#define SR_MONITOR_HSFS (1 << 4)
+/* command : Medium Status Write Reg */
+#define SR_CMD_WRITE_MEDIUM_MODE 0x1b
+#define SR_MEDIUM_GM (1 << 0)
+#define SR_MEDIUM_FD (1 << 1)
+#define SR_MEDIUM_AC (1 << 2)
+#define SR_MEDIUM_ENCK (1 << 3)
+#define SR_MEDIUM_RFC (1 << 4)
+#define SR_MEDIUM_TFC (1 << 5)
+#define SR_MEDIUM_JFE (1 << 6)
+#define SR_MEDIUM_PF (1 << 7)
+#define SR_MEDIUM_RE (1 << 8)
+#define SR_MEDIUM_PS (1 << 9)
+#define SR_MEDIUM_RSV (1 << 10)
+#define SR_MEDIUM_SBP (1 << 11)
+#define SR_MEDIUM_SM (1 << 12)
+/* command : Monitor Mode Status Read Reg */
+#define SR_CMD_READ_MONITOR_MODE 0x1c
+/* command : Monitor Mode Status Write Reg */
+#define SR_CMD_WRITE_MONITOR_MODE 0x1d
+/* command : GPIO Status Read Reg */
+#define SR_CMD_READ_GPIOS 0x1e
+#define SR_GPIO_GPO0EN (1 << 0) /* GPIO0 Output enable */
+#define SR_GPIO_GPO_0 (1 << 1) /* GPIO0 Output value */
+#define SR_GPIO_GPO1EN (1 << 2) /* GPIO1 Output enable */
+#define SR_GPIO_GPO_1 (1 << 3) /* GPIO1 Output value */
+#define SR_GPIO_GPO2EN (1 << 4) /* GPIO2 Output enable */
+#define SR_GPIO_GPO_2 (1 << 5) /* GPIO2 Output value */
+#define SR_GPIO_RESERVED (1 << 6) /* Reserved */
+#define SR_GPIO_RSE (1 << 7) /* Reload serial EEPROM */
+/* command : GPIO Status Write Reg */
+#define SR_CMD_WRITE_GPIOS 0x1f
+/* command : Eth PHY Power and Reset Control Reg */
+#define SR_CMD_SW_RESET 0x20
+#define SR_SWRESET_CLEAR 0x00
+#define SR_SWRESET_RR (1 << 0)
+#define SR_SWRESET_RT (1 << 1)
+#define SR_SWRESET_PRTE (1 << 2)
+#define SR_SWRESET_PRL (1 << 3)
+#define SR_SWRESET_BZ (1 << 4)
+#define SR_SWRESET_IPRL (1 << 5)
+#define SR_SWRESET_IPPD (1 << 6)
+/* command : Software Interface Selection Status Read Reg */
+#define SR_CMD_SW_PHY_STATUS 0x21
+/* command : Software Interface Selection Status Write Reg */
+#define SR_CMD_SW_PHY_SELECT 0x22
+/* command : BULK in Buffer Size Reg */
+#define SR_CMD_BULKIN_SIZE 0x2A
+/* command : LED_MUX Control Reg */
+#define SR_CMD_LED_MUX 0x70
+#define SR_LED_MUX_TX_ACTIVE (1 << 0)
+#define SR_LED_MUX_RX_ACTIVE (1 << 1)
+#define SR_LED_MUX_COLLISION (1 << 2)
+#define SR_LED_MUX_DUP_COL (1 << 3)
+#define SR_LED_MUX_DUP (1 << 4)
+#define SR_LED_MUX_SPEED (1 << 5)
+#define SR_LED_MUX_LINK_ACTIVE (1 << 6)
+#define SR_LED_MUX_LINK (1 << 7)
+
+/* Register Access Flags */
+#define SR_REQ_RD_REG (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+#define SR_REQ_WR_REG (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+
+/* Multicast Filter Array size & Max Number */
+#define SR_MCAST_FILTER_SIZE 8
+#define SR_MAX_MCAST 64
+
+/* IPG0/1/2 Default Value */
+#define SR9800_IPG0_DEFAULT 0x15
+#define SR9800_IPG1_DEFAULT 0x0c
+#define SR9800_IPG2_DEFAULT 0x12
+
+/* Medium Status Default Mode */
+#define SR9800_MEDIUM_DEFAULT \
+ (SR_MEDIUM_FD | SR_MEDIUM_RFC | \
+ SR_MEDIUM_TFC | SR_MEDIUM_PS | \
+ SR_MEDIUM_AC | SR_MEDIUM_RE)
+
+/* RX Control Default Setting */
+#define SR_DEFAULT_RX_CTL \
+ (SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M)
+
+/* EEPROM Magic Number & EEPROM Size */
+#define SR_EEPROM_MAGIC 0xdeadbeef
+#define SR9800_EEPROM_LEN 0xff
+
+/* SR9800 Driver Version and Driver Name */
+#define DRIVER_VERSION "11-Nov-2013"
+#define DRIVER_NAME "CoreChips"
+#define DRIVER_FLAG \
+ (FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET)
+
+/* SR9800 BULKIN Buffer Size */
+#define SR9800_MAX_BULKIN_2K 0
+#define SR9800_MAX_BULKIN_4K 1
+#define SR9800_MAX_BULKIN_6K 2
+#define SR9800_MAX_BULKIN_8K 3
+#define SR9800_MAX_BULKIN_16K 4
+#define SR9800_MAX_BULKIN_20K 5
+#define SR9800_MAX_BULKIN_24K 6
+#define SR9800_MAX_BULKIN_32K 7
+
+struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = {
+ /* 2k */
+ {2048, 0x8000, 0x8001},
+ /* 4k */
+ {4096, 0x8100, 0x8147},
+ /* 6k */
+ {6144, 0x8200, 0x81EB},
+ /* 8k */
+ {8192, 0x8300, 0x83D7},
+ /* 16 */
+ {16384, 0x8400, 0x851E},
+ /* 20k */
+ {20480, 0x8500, 0x8666},
+ /* 24k */
+ {24576, 0x8600, 0x87AE},
+ /* 32k */
+ {32768, 0x8700, 0x8A3D},
+};
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct sr_data {
+ u8 multi_filter[SR_MCAST_FILTER_SIZE];
+ u8 mac_addr[ETH_ALEN];
+ u8 phymode;
+ u8 ledmode;
+ u8 eeprom_len;
+};
+
+struct sr9800_int_data {
+ __le16 res1;
+ u8 link;
+ __le16 res2;
+ u8 status;
+ __le16 res3;
+} __packed;
+
+#endif /* _SR9800_H */
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 026a313..b0f705c 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -469,7 +469,6 @@
/* Look up Ethernet address in forwarding table */
static struct vxlan_fdb *__vxlan_find_mac(struct vxlan_dev *vxlan,
const u8 *mac)
-
{
struct hlist_head *head = vxlan_fdb_head(vxlan, mac);
struct vxlan_fdb *f;
@@ -596,10 +595,8 @@
NAPI_GRO_CB(p)->same_flow = 0;
continue;
}
- goto found;
}
-found:
type = eh->h_proto;
rcu_read_lock();
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 0d1c759..19f7cb2 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -71,12 +71,9 @@
const void *saddr, unsigned len)
{
struct frhdr hdr;
- struct dlci_local *dlp;
unsigned int hlen;
char *dest;
- dlp = netdev_priv(dev);
-
hdr.control = FRAD_I_UI;
switch (type)
{
@@ -107,11 +104,9 @@
static void dlci_receive(struct sk_buff *skb, struct net_device *dev)
{
- struct dlci_local *dlp;
struct frhdr *hdr;
int process, header;
- dlp = netdev_priv(dev);
if (!pskb_may_pull(skb, sizeof(*hdr))) {
netdev_notice(dev, "invalid data no header\n");
dev->stats.rx_errors++;
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 8aa20df..507d9a9 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -1764,7 +1764,7 @@
AR5523_DEVICE_UG(0x07d1, 0x3a07), /* D-Link / WUA-2340 rev A1 */
AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */
AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */
- AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108
+ AR5523_DEVICE_UG(0x129b, 0x160b), /* Gigaset / USB stick 108
(CyberTAN Technology) */
AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */
AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 25243cb..b8daff7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -5065,6 +5065,10 @@
break;
}
}
+
+ if (is2GHz && !twiceMaxEdgePower)
+ twiceMaxEdgePower = 60;
+
return twiceMaxEdgePower;
}
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 58da346..99a2031 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -262,6 +262,8 @@
struct ath9k_htc_sta {
u8 index;
enum tid_aggr_state tid_state[ATH9K_HTC_MAX_TID];
+ struct work_struct rc_update_work;
+ struct ath9k_htc_priv *htc_priv;
};
#define ATH9K_HTC_RXBUF 256
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index f4e1de2..c57d6b8 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -34,6 +34,10 @@
module_param_named(btcoex_enable, ath9k_htc_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
+static int ath9k_ps_enable;
+module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
+MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
+
#define CHAN2G(_freq, _idx) { \
.center_freq = (_freq), \
.hw_value = (_idx), \
@@ -725,12 +729,14 @@
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_MFP_CAPABLE |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+ if (ath9k_ps_enable)
+ hw->flags |= IEEE80211_HW_SUPPORTS_PS;
+
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 608d739..c9254a6 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1270,18 +1270,50 @@
mutex_unlock(&priv->mutex);
}
+static void ath9k_htc_sta_rc_update_work(struct work_struct *work)
+{
+ struct ath9k_htc_sta *ista =
+ container_of(work, struct ath9k_htc_sta, rc_update_work);
+ struct ieee80211_sta *sta =
+ container_of((void *)ista, struct ieee80211_sta, drv_priv);
+ struct ath9k_htc_priv *priv = ista->htc_priv;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_target_rate trate;
+
+ mutex_lock(&priv->mutex);
+ ath9k_htc_ps_wakeup(priv);
+
+ memset(&trate, 0, sizeof(struct ath9k_htc_target_rate));
+ ath9k_htc_setup_rate(priv, sta, &trate);
+ if (!ath9k_htc_send_rate_cmd(priv, &trate))
+ ath_dbg(common, CONFIG,
+ "Supported rates for sta: %pM updated, rate caps: 0x%X\n",
+ sta->addr, be32_to_cpu(trate.capflags));
+ else
+ ath_dbg(common, CONFIG,
+ "Unable to update supported rates for sta: %pM\n",
+ sta->addr);
+
+ ath9k_htc_ps_restore(priv);
+ mutex_unlock(&priv->mutex);
+}
+
static int ath9k_htc_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath9k_htc_priv *priv = hw->priv;
+ struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
int ret;
mutex_lock(&priv->mutex);
ath9k_htc_ps_wakeup(priv);
ret = ath9k_htc_add_station(priv, vif, sta);
- if (!ret)
+ if (!ret) {
+ INIT_WORK(&ista->rc_update_work, ath9k_htc_sta_rc_update_work);
+ ista->htc_priv = priv;
ath9k_htc_init_rate(priv, sta);
+ }
ath9k_htc_ps_restore(priv);
mutex_unlock(&priv->mutex);
@@ -1293,12 +1325,13 @@
struct ieee80211_sta *sta)
{
struct ath9k_htc_priv *priv = hw->priv;
- struct ath9k_htc_sta *ista;
+ struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
int ret;
+ cancel_work_sync(&ista->rc_update_work);
+
mutex_lock(&priv->mutex);
ath9k_htc_ps_wakeup(priv);
- ista = (struct ath9k_htc_sta *) sta->drv_priv;
htc_sta_drain(priv->htc, ista->index);
ret = ath9k_htc_remove_station(priv, vif, sta);
ath9k_htc_ps_restore(priv);
@@ -1311,28 +1344,12 @@
struct ieee80211_vif *vif,
struct ieee80211_sta *sta, u32 changed)
{
- struct ath9k_htc_priv *priv = hw->priv;
- struct ath_common *common = ath9k_hw_common(priv->ah);
- struct ath9k_htc_target_rate trate;
+ struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
- mutex_lock(&priv->mutex);
- ath9k_htc_ps_wakeup(priv);
+ if (!(changed & IEEE80211_RC_SUPP_RATES_CHANGED))
+ return;
- if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) {
- memset(&trate, 0, sizeof(struct ath9k_htc_target_rate));
- ath9k_htc_setup_rate(priv, sta, &trate);
- if (!ath9k_htc_send_rate_cmd(priv, &trate))
- ath_dbg(common, CONFIG,
- "Supported rates for sta: %pM updated, rate caps: 0x%X\n",
- sta->addr, be32_to_cpu(trate.capflags));
- else
- ath_dbg(common, CONFIG,
- "Unable to update supported rates for sta: %pM\n",
- sta->addr);
- }
-
- ath9k_htc_ps_restore(priv);
- mutex_unlock(&priv->mutex);
+ schedule_work(&ista->rc_update_work);
}
static int ath9k_htc_conf_tx(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index fbf43c0..11eab9f 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1316,7 +1316,7 @@
if (AR_SREV_9300_20_OR_LATER(ah))
udelay(50);
else if (AR_SREV_9100(ah))
- udelay(10000);
+ mdelay(10);
else
udelay(100);
@@ -2051,9 +2051,8 @@
REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
AR_RTC_FORCE_WAKE_EN);
-
if (AR_SREV_9100(ah))
- udelay(10000);
+ mdelay(10);
else
udelay(50);
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index c36de30..1fc2e5a 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -57,6 +57,10 @@
module_param_named(bt_ant_diversity, ath9k_bt_ant_diversity, int, 0444);
MODULE_PARM_DESC(bt_ant_diversity, "Enable WLAN/BT RX antenna diversity");
+static int ath9k_ps_enable;
+module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
+MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
+
bool is_ath9k_unloaded;
/* We use the hw_value as an index into our private channel structure */
@@ -903,13 +907,15 @@
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_SUPPORTS_RC_TABLE |
IEEE80211_HW_SUPPORTS_HT_CCK_RATES;
+ if (ath9k_ps_enable)
+ hw->flags |= IEEE80211_HW_SUPPORTS_PS;
+
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index f06f4cb..725e954d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -182,6 +182,11 @@
for (ch_idx = 0; ch_idx < IWL_NUM_CHANNELS; ch_idx++) {
ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx);
+
+ if (ch_idx >= NUM_2GHZ_CHANNELS &&
+ !data->sku_cap_band_52GHz_enable)
+ ch_flags &= ~NVM_CHANNEL_VALID;
+
if (!(ch_flags & NVM_CHANNEL_VALID)) {
IWL_DEBUG_EEPROM(dev,
"Ch. %d Flags %x [%sGHz] - No traffic\n",
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
index 73cbba7..9426905 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
@@ -504,6 +504,7 @@
* @match_notify: clients waiting for match found notification
* @pass_match: clients waiting for the results
* @active_clients: active clients bitmap - enum scan_framework_client
+ * @any_beacon_notify: clients waiting for match notification without match
*/
struct iwl_scan_offload_profile_cfg {
struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES];
@@ -512,7 +513,8 @@
u8 match_notify;
u8 pass_match;
u8 active_clients;
- u8 reserved[3];
+ u8 any_beacon_notify;
+ u8 reserved[2];
} __packed;
/**
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index c49b507..6bf9766 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -246,7 +246,7 @@
else
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
- if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) {
+ if (0 && mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) {
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX;
hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES;
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 0e00079..742afc4 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -344,7 +344,8 @@
iwl_mvm_scan_fill_ssids(cmd, req, basic_ssid ? 1 : 0);
- cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL);
+ cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL |
+ TX_CMD_FLG_BT_DIS);
cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id;
cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE);
cmd->tx_cmd.rate_n_flags =
@@ -807,6 +808,8 @@
profile_cfg->active_clients = SCAN_CLIENT_SCHED_SCAN;
profile_cfg->pass_match = SCAN_CLIENT_SCHED_SCAN;
profile_cfg->match_notify = SCAN_CLIENT_SCHED_SCAN;
+ if (!req->n_match_sets || !req->match_sets[0].ssid.ssid_len)
+ profile_cfg->any_beacon_notify = SCAN_CLIENT_SCHED_SCAN;
for (i = 0; i < req->n_match_sets; i++) {
profile = &profile_cfg->profiles[i];
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index ec18121..3397f59 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -652,7 +652,7 @@
{
struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
static const u8 _baddr[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
- static const u8 *baddr = _baddr;
+ const u8 *baddr = _baddr;
lockdep_assert_held(&mvm->mutex);
diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c
index 90378c2..4df12fa 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -659,8 +659,14 @@
rcu_read_lock();
sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]);
+ /*
+ * sta can't be NULL otherwise it'd mean that the sta has been freed in
+ * the firmware while we still have packets for it in the Tx queues.
+ */
+ if (WARN_ON_ONCE(!sta))
+ goto out;
- if (!IS_ERR_OR_NULL(sta)) {
+ if (!IS_ERR(sta)) {
mvmsta = iwl_mvm_sta_from_mac80211(sta);
if (tid != IWL_TID_NON_QOS) {
@@ -675,7 +681,6 @@
spin_unlock_bh(&mvmsta->lock);
}
} else {
- sta = NULL;
mvmsta = NULL;
}
@@ -683,42 +688,38 @@
* If the txq is not an AMPDU queue, there is no chance we freed
* several skbs. Check that out...
*/
- if (txq_id < mvm->first_agg_queue && !WARN_ON(skb_freed > 1) &&
- atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) {
- if (mvmsta) {
- /*
- * If there are no pending frames for this STA, notify
- * mac80211 that this station can go to sleep in its
- * STA table.
- */
- if (mvmsta->vif->type == NL80211_IFTYPE_AP)
- ieee80211_sta_block_awake(mvm->hw, sta, false);
- /*
- * We might very well have taken mvmsta pointer while
- * the station was being removed. The remove flow might
- * have seen a pending_frame (because we didn't take
- * the lock) even if now the queues are drained. So make
- * really sure now that this the station is not being
- * removed. If it is, run the drain worker to remove it.
- */
- spin_lock_bh(&mvmsta->lock);
- sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]);
- if (!sta || PTR_ERR(sta) == -EBUSY) {
- /*
- * Station disappeared in the meantime:
- * so we are draining.
- */
- set_bit(sta_id, mvm->sta_drained);
- schedule_work(&mvm->sta_drained_wk);
- }
- spin_unlock_bh(&mvmsta->lock);
- } else if (!mvmsta && PTR_ERR(sta) == -EBUSY) {
- /* Tx response without STA, so we are draining */
- set_bit(sta_id, mvm->sta_drained);
- schedule_work(&mvm->sta_drained_wk);
- }
+ if (txq_id >= mvm->first_agg_queue)
+ goto out;
+
+ /* We can't free more than one frame at once on a shared queue */
+ WARN_ON(skb_freed > 1);
+
+ /* If we have still frames from this STA nothing to do here */
+ if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id]))
+ goto out;
+
+ if (mvmsta && mvmsta->vif->type == NL80211_IFTYPE_AP) {
+ /*
+ * If there are no pending frames for this STA, notify
+ * mac80211 that this station can go to sleep in its
+ * STA table.
+ * If mvmsta is not NULL, sta is valid.
+ */
+ ieee80211_sta_block_awake(mvm->hw, sta, false);
}
+ if (PTR_ERR(sta) == -EBUSY || PTR_ERR(sta) == -ENOENT) {
+ /*
+ * We are draining and this was the last packet - pre_rcu_remove
+ * has been called already. We might be after the
+ * synchronize_net already.
+ * Don't rely on iwl_mvm_rm_sta to see the empty Tx queues.
+ */
+ set_bit(sta_id, mvm->sta_drained);
+ schedule_work(&mvm->sta_drained_wk);
+ }
+
+out:
rcu_read_unlock();
}
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index a4a5e25..86989df 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -411,6 +411,8 @@
mvm->status, table.valid);
}
+ IWL_ERR(mvm, "Loaded firmware version: %s\n", mvm->fw->fw_version);
+
trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low,
table.data1, table.data2, table.data3,
table.blink1, table.blink2, table.ilink1,
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 3040924..f47bcbe 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -359,20 +359,25 @@
/* 7265 Series */
{IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x5112, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x5100, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x510A, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5310, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5302, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5210, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)},
- {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2n_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5200, iwl7265_2n_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5002, iwl7265_n_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)},
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index abc5f56..2f1cd92 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1877,6 +1877,11 @@
EEPROM_MAC_ADDR_0));
/*
+ * Disable powersaving as default.
+ */
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
+ /*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 9f16824..d849d59 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1706,6 +1706,11 @@
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK;
+ /*
+ * Disable powersaving as default.
+ */
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
rt2x00_eeprom_addr(rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index b8f5b06..7f8b5d1 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -7458,10 +7458,9 @@
u32 reg;
/*
- * Disable powersaving as default on PCI devices.
+ * Disable powersaving as default.
*/
- if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
- rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
/*
* Initialize all hw fields.
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 8ec17aa..3867d14 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -107,6 +107,7 @@
struct rtl8180_priv *priv = dev->priv;
unsigned int count = 32;
u8 signal, agc, sq;
+ dma_addr_t mapping;
while (count--) {
struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
@@ -128,6 +129,17 @@
if (unlikely(!new_skb))
goto done;
+ mapping = pci_map_single(priv->pdev,
+ skb_tail_pointer(new_skb),
+ MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ kfree_skb(new_skb);
+ dev_err(&priv->pdev->dev, "RX DMA map error\n");
+
+ goto done;
+ }
+
pci_unmap_single(priv->pdev,
*((dma_addr_t *)skb->cb),
MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
@@ -158,9 +170,7 @@
skb = new_skb;
priv->rx_buf[priv->rx_idx] = skb;
- *((dma_addr_t *) skb->cb) =
- pci_map_single(priv->pdev, skb_tail_pointer(skb),
- MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+ *((dma_addr_t *) skb->cb) = mapping;
}
done:
@@ -266,6 +276,13 @@
mapping = pci_map_single(priv->pdev, skb->data,
skb->len, PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ kfree_skb(skb);
+ dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
+ return;
+
+ }
+
tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
RTL818X_TX_DESC_FLAG_LS |
(ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 4c76bcb..ae413a2 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -143,11 +143,7 @@
char rx_irq_name[IFNAMSIZ+4]; /* DEVNAME-rx */
struct xen_netif_rx_back_ring rx;
struct sk_buff_head rx_queue;
- bool rx_queue_stopped;
- /* Set when the RX interrupt is triggered by the frontend.
- * The worker thread may need to wake the queue.
- */
- bool rx_event;
+ RING_IDX rx_last_skb_slots;
/* This array is allocated seperately as it is large */
struct gnttab_copy *grant_copy_op;
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index b9de31e..7669d49 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -100,7 +100,6 @@
{
struct xenvif *vif = dev_id;
- vif->rx_event = true;
xenvif_kick_thread(vif);
return IRQ_HANDLED;
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 6b62c3e..e5284bc 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -476,7 +476,6 @@
unsigned long offset;
struct skb_cb_overlay *sco;
bool need_to_notify = false;
- bool ring_full = false;
struct netrx_pending_operations npo = {
.copy = vif->grant_copy_op,
@@ -486,7 +485,7 @@
skb_queue_head_init(&rxq);
while ((skb = skb_dequeue(&vif->rx_queue)) != NULL) {
- int max_slots_needed;
+ RING_IDX max_slots_needed;
int i;
/* We need a cheap worse case estimate for the number of
@@ -509,9 +508,10 @@
if (!xenvif_rx_ring_slots_available(vif, max_slots_needed)) {
skb_queue_head(&vif->rx_queue, skb);
need_to_notify = true;
- ring_full = true;
+ vif->rx_last_skb_slots = max_slots_needed;
break;
- }
+ } else
+ vif->rx_last_skb_slots = 0;
sco = (struct skb_cb_overlay *)skb->cb;
sco->meta_slots_used = xenvif_gop_skb(skb, &npo);
@@ -522,8 +522,6 @@
BUG_ON(npo.meta_prod > ARRAY_SIZE(vif->meta));
- vif->rx_queue_stopped = !npo.copy_prod && ring_full;
-
if (!npo.copy_prod)
goto done;
@@ -1473,8 +1471,8 @@
static inline int rx_work_todo(struct xenvif *vif)
{
- return (!skb_queue_empty(&vif->rx_queue) && !vif->rx_queue_stopped) ||
- vif->rx_event;
+ return !skb_queue_empty(&vif->rx_queue) &&
+ xenvif_rx_ring_slots_available(vif, vif->rx_last_skb_slots);
}
static inline int tx_work_todo(struct xenvif *vif)
@@ -1560,8 +1558,6 @@
if (!skb_queue_empty(&vif->rx_queue))
xenvif_rx_action(vif);
- vif->rx_event = false;
-
if (skb_queue_empty(&vif->rx_queue) &&
netif_queue_stopped(vif->dev))
xenvif_start_queue(vif);
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index ff04d4f..f9daa9e 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1832,7 +1832,6 @@
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateInitWait:
@@ -1847,6 +1846,10 @@
netdev_notify_peers(netdev);
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's CLOSING state -- fallthrough */
case XenbusStateClosing:
xenbus_frontend_closed(dev);
break;
diff --git a/drivers/of/address.c b/drivers/of/address.c
index d3dd41c..1a54f1f 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -99,11 +99,12 @@
static int of_bus_pci_match(struct device_node *np)
{
/*
+ * "pciex" is PCI Express
* "vci" is for the /chaos bridge on 1st-gen PCI powermacs
* "ht" is hypertransport
*/
- return !strcmp(np->type, "pci") || !strcmp(np->type, "vci") ||
- !strcmp(np->type, "ht");
+ return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex") ||
+ !strcmp(np->type, "vci") || !strcmp(np->type, "ht");
}
static void of_bus_pci_count_cells(struct device_node *np,
diff --git a/drivers/of/base.c b/drivers/of/base.c
index ff85450..10b5110 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -730,46 +730,64 @@
}
EXPORT_SYMBOL(of_find_node_with_property);
+static const struct of_device_id *
+of_match_compatible(const struct of_device_id *matches,
+ const struct device_node *node)
+{
+ const char *cp;
+ int cplen, l;
+ const struct of_device_id *m;
+
+ cp = __of_get_property(node, "compatible", &cplen);
+ while (cp && (cplen > 0)) {
+ m = matches;
+ while (m->name[0] || m->type[0] || m->compatible[0]) {
+ /* Only match for the entries without type and name */
+ if (m->name[0] || m->type[0] ||
+ of_compat_cmp(m->compatible, cp,
+ strlen(m->compatible)))
+ m++;
+ else
+ return m;
+ }
+
+ /* Get node's next compatible string */
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return NULL;
+}
+
static
const struct of_device_id *__of_match_node(const struct of_device_id *matches,
const struct device_node *node)
{
- const char *cp;
- int cplen, l;
+ const struct of_device_id *m;
if (!matches)
return NULL;
- cp = __of_get_property(node, "compatible", &cplen);
- do {
- const struct of_device_id *m = matches;
+ m = of_match_compatible(matches, node);
+ if (m)
+ return m;
- /* Check against matches with current compatible string */
- while (m->name[0] || m->type[0] || m->compatible[0]) {
- int match = 1;
- if (m->name[0])
- match &= node->name
- && !strcmp(m->name, node->name);
- if (m->type[0])
- match &= node->type
- && !strcmp(m->type, node->type);
- if (m->compatible[0])
- match &= cp
- && !of_compat_cmp(m->compatible, cp,
- strlen(m->compatible));
- if (match)
- return m;
- m++;
- }
-
- /* Get node's next compatible string */
- if (cp) {
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
- } while (cp && (cplen > 0));
-
+ while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
+ int match = 1;
+ if (matches->name[0])
+ match &= node->name
+ && !strcmp(matches->name, node->name);
+ if (matches->type[0])
+ match &= node->type
+ && !strcmp(matches->type, node->type);
+ if (matches->compatible[0])
+ match &= __of_device_is_compatible(node,
+ matches->compatible);
+ if (match)
+ return matches;
+ matches++;
+ }
return NULL;
}
@@ -778,10 +796,12 @@
* @matches: array of of device match structures to search in
* @node: the of device structure to match against
*
- * Low level utility function used by device matching. Matching order
- * is to compare each of the node's compatibles with all given matches
- * first. This implies node's compatible is sorted from specific to
- * generic while matches can be in any order.
+ * Low level utility function used by device matching. We have two ways
+ * of matching:
+ * - Try to find the best compatible match by comparing each compatible
+ * string of device node with all the given matches respectively.
+ * - If the above method failed, then try to match the compatible by using
+ * __of_device_is_compatible() besides the match in type and name.
*/
const struct of_device_id *of_match_node(const struct of_device_id *matches,
const struct device_node *node)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index cd929ae..7c7a388 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -210,10 +210,29 @@
}
}
+static void dock_event(acpi_handle handle, u32 type, void *data)
+{
+ struct acpiphp_context *context;
+
+ mutex_lock(&acpiphp_context_lock);
+ context = acpiphp_get_context(handle);
+ if (!context || WARN_ON(context->handle != handle)
+ || context->func.parent->is_going_away) {
+ mutex_unlock(&acpiphp_context_lock);
+ return;
+ }
+ get_bridge(context->func.parent);
+ acpiphp_put_context(context);
+ mutex_unlock(&acpiphp_context_lock);
+
+ hotplug_event(handle, type, data);
+
+ put_bridge(context->func.parent);
+}
static const struct acpi_dock_ops acpiphp_dock_ops = {
.fixup = post_dock_fixups,
- .handler = hotplug_event,
+ .handler = dock_event,
};
/* Check whether the PCI device is managed by native PCIe hotplug driver */
@@ -441,7 +460,9 @@
list_del(&bridge->list);
mutex_unlock(&bridge_mutex);
+ mutex_lock(&acpiphp_context_lock);
bridge->is_going_away = true;
+ mutex_unlock(&acpiphp_context_lock);
}
/**
@@ -709,6 +730,17 @@
return (unsigned int)sta;
}
+static inline bool device_status_valid(unsigned int sta)
+{
+ /*
+ * ACPI spec says that _STA may return bit 0 clear with bit 3 set
+ * if the device is valid but does not require a device driver to be
+ * loaded (Section 6.3.7 of ACPI 5.0A).
+ */
+ unsigned int mask = ACPI_STA_DEVICE_ENABLED | ACPI_STA_DEVICE_FUNCTIONING;
+ return (sta & mask) == mask;
+}
+
/**
* trim_stale_devices - remove PCI devices that are not responding.
* @dev: PCI device to start walking the hierarchy from.
@@ -724,7 +756,7 @@
unsigned long long sta;
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
- alive = (ACPI_SUCCESS(status) && sta == ACPI_STA_ALL)
+ alive = (ACPI_SUCCESS(status) && device_status_valid(sta))
|| acpiphp_no_hotplug(handle);
}
if (!alive) {
@@ -742,7 +774,7 @@
/* The device is a bridge. so check the bus below it. */
pm_runtime_get_sync(&dev->dev);
- list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
+ list_for_each_entry_safe_reverse(child, tmp, &bus->devices, bus_list)
trim_stale_devices(child);
pm_runtime_put(&dev->dev);
@@ -771,10 +803,10 @@
mutex_lock(&slot->crit_sect);
if (slot_no_hotplug(slot)) {
; /* do nothing */
- } else if (get_slot_status(slot) == ACPI_STA_ALL) {
+ } else if (device_status_valid(get_slot_status(slot))) {
/* remove stale devices if any */
- list_for_each_entry_safe(dev, tmp, &bus->devices,
- bus_list)
+ list_for_each_entry_safe_reverse(dev, tmp,
+ &bus->devices, bus_list)
if (PCI_SLOT(dev->devfn) == slot->device)
trim_stale_devices(dev);
@@ -805,7 +837,7 @@
int i;
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
- list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+ list_for_each_entry_safe_reverse(dev, tmp, &bus->devices, bus_list) {
for (i=0; i<PCI_BRIDGE_RESOURCES; i++) {
struct resource *res = &dev->resource[i];
if ((res->flags & type_mask) && !res->start &&
@@ -829,7 +861,11 @@
bridge = acpiphp_handle_to_bridge(handle);
if (bridge) {
+ pci_lock_rescan_remove();
+
acpiphp_check_bridge(bridge);
+
+ pci_unlock_rescan_remove();
put_bridge(bridge);
}
}
@@ -852,6 +888,7 @@
mutex_unlock(&acpiphp_context_lock);
+ pci_lock_rescan_remove();
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
switch (type) {
@@ -905,6 +942,7 @@
break;
}
+ pci_unlock_rescan_remove();
if (bridge)
put_bridge(bridge);
}
@@ -915,11 +953,9 @@
acpi_handle handle = context->handle;
acpi_scan_lock_acquire();
- pci_lock_rescan_remove();
hotplug_event(handle, type, context);
- pci_unlock_rescan_remove();
acpi_scan_lock_release();
acpi_evaluate_hotplug_ost(handle, type, ACPI_OST_SC_SUCCESS, NULL);
put_bridge(context->func.parent);
@@ -937,6 +973,7 @@
{
struct acpiphp_context *context;
u32 ost_code = ACPI_OST_SC_SUCCESS;
+ acpi_status status;
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
@@ -972,13 +1009,20 @@
mutex_lock(&acpiphp_context_lock);
context = acpiphp_get_context(handle);
- if (context && !WARN_ON(context->handle != handle)) {
- get_bridge(context->func.parent);
- acpiphp_put_context(context);
- acpi_hotplug_execute(hotplug_event_work, context, type);
+ if (!context || WARN_ON(context->handle != handle)
+ || context->func.parent->is_going_away)
+ goto err_out;
+
+ get_bridge(context->func.parent);
+ acpiphp_put_context(context);
+ status = acpi_hotplug_execute(hotplug_event_work, context, type);
+ if (ACPI_SUCCESS(status)) {
mutex_unlock(&acpiphp_context_lock);
return;
}
+ put_bridge(context->func.parent);
+
+ err_out:
mutex_unlock(&acpiphp_context_lock);
ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE;
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 645c867..5f5b0f4 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -162,6 +162,9 @@
{
int ret;
+ if (!phy)
+ return 0;
+
ret = phy_pm_runtime_get_sync(phy);
if (ret < 0 && ret != -ENOTSUPP)
return ret;
@@ -187,6 +190,9 @@
{
int ret;
+ if (!phy)
+ return 0;
+
ret = phy_pm_runtime_get_sync(phy);
if (ret < 0 && ret != -ENOTSUPP)
return ret;
@@ -212,6 +218,9 @@
{
int ret;
+ if (!phy)
+ return 0;
+
ret = phy_pm_runtime_get_sync(phy);
if (ret < 0 && ret != -ENOTSUPP)
return ret;
@@ -240,6 +249,9 @@
{
int ret;
+ if (!phy)
+ return 0;
+
mutex_lock(&phy->mutex);
if (phy->power_count == 1 && phy->ops->power_off) {
ret = phy->ops->power_off(phy);
@@ -308,7 +320,7 @@
*/
void phy_put(struct phy *phy)
{
- if (IS_ERR(phy))
+ if (!phy || IS_ERR(phy))
return;
module_put(phy->ops->owner);
@@ -328,6 +340,9 @@
{
int r;
+ if (!phy)
+ return;
+
r = devres_destroy(dev, devm_phy_release, devm_phy_match, phy);
dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
}
@@ -411,6 +426,27 @@
EXPORT_SYMBOL_GPL(phy_get);
/**
+ * phy_optional_get() - lookup and obtain a reference to an optional phy.
+ * @dev: device that requests this phy
+ * @string: the phy name as given in the dt data or the name of the controller
+ * port for non-dt case
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * NULL if there is no such phy. The caller is responsible for
+ * calling phy_put() to release that count.
+ */
+struct phy *phy_optional_get(struct device *dev, const char *string)
+{
+ struct phy *phy = phy_get(dev, string);
+
+ if (PTR_ERR(phy) == -ENODEV)
+ phy = NULL;
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(phy_optional_get);
+
+/**
* devm_phy_get() - lookup and obtain a reference to a phy.
* @dev: device that requests this phy
* @string: the phy name as given in the dt data or phy device name
@@ -441,6 +477,30 @@
EXPORT_SYMBOL_GPL(devm_phy_get);
/**
+ * devm_phy_optional_get() - lookup and obtain a reference to an optional phy.
+ * @dev: device that requests this phy
+ * @string: the phy name as given in the dt data or phy device name
+ * for non-dt case
+ *
+ * Gets the phy using phy_get(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres
+ * data, then, devres data is freed. This differs to devm_phy_get() in
+ * that if the phy does not exist, it is not considered an error and
+ * -ENODEV will not be returned. Instead the NULL phy is returned,
+ * which can be passed to all other phy consumer calls.
+ */
+struct phy *devm_phy_optional_get(struct device *dev, const char *string)
+{
+ struct phy *phy = devm_phy_get(dev, string);
+
+ if (PTR_ERR(phy) == -ENODEV)
+ phy = NULL;
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(devm_phy_optional_get);
+
+/**
* phy_create() - create a new phy
* @dev: device that is creating the new phy
* @ops: function pointers for performing phy operations
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 5ee61a4..c0fe609 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -851,7 +851,9 @@
kref_init(&p->users);
/* Add the pinctrl handle to the global list */
+ mutex_lock(&pinctrl_list_mutex);
list_add_tail(&p->node, &pinctrl_list);
+ mutex_unlock(&pinctrl_list_mutex);
return p;
}
@@ -1642,8 +1644,10 @@
device_root, pctldev, &pinctrl_groups_ops);
debugfs_create_file("gpio-ranges", S_IFREG | S_IRUGO,
device_root, pctldev, &pinctrl_gpioranges_ops);
- pinmux_init_device_debugfs(device_root, pctldev);
- pinconf_init_device_debugfs(device_root, pctldev);
+ if (pctldev->desc->pmxops)
+ pinmux_init_device_debugfs(device_root, pctldev);
+ if (pctldev->desc->confops)
+ pinconf_init_device_debugfs(device_root, pctldev);
}
static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev)
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 38c6f8b..d990e33 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1286,22 +1286,22 @@
switch (type) {
case IRQ_TYPE_EDGE_RISING:
- irq_set_handler(d->irq, handle_simple_irq);
+ __irq_set_handler_locked(d->irq, handle_simple_irq);
writel_relaxed(mask, pio + PIO_ESR);
writel_relaxed(mask, pio + PIO_REHLSR);
break;
case IRQ_TYPE_EDGE_FALLING:
- irq_set_handler(d->irq, handle_simple_irq);
+ __irq_set_handler_locked(d->irq, handle_simple_irq);
writel_relaxed(mask, pio + PIO_ESR);
writel_relaxed(mask, pio + PIO_FELLSR);
break;
case IRQ_TYPE_LEVEL_LOW:
- irq_set_handler(d->irq, handle_level_irq);
+ __irq_set_handler_locked(d->irq, handle_level_irq);
writel_relaxed(mask, pio + PIO_LSR);
writel_relaxed(mask, pio + PIO_FELLSR);
break;
case IRQ_TYPE_LEVEL_HIGH:
- irq_set_handler(d->irq, handle_level_irq);
+ __irq_set_handler_locked(d->irq, handle_level_irq);
writel_relaxed(mask, pio + PIO_LSR);
writel_relaxed(mask, pio + PIO_REHLSR);
break;
@@ -1310,7 +1310,7 @@
* disable additional interrupt modes:
* fall back to default behavior
*/
- irq_set_handler(d->irq, handle_simple_irq);
+ __irq_set_handler_locked(d->irq, handle_simple_irq);
writel_relaxed(mask, pio + PIO_AIMDR);
return 0;
case IRQ_TYPE_NONE:
diff --git a/drivers/pinctrl/pinctrl-imx1-core.c b/drivers/pinctrl/pinctrl-imx1-core.c
index 17aecde..815384b 100644
--- a/drivers/pinctrl/pinctrl-imx1-core.c
+++ b/drivers/pinctrl/pinctrl-imx1-core.c
@@ -45,7 +45,7 @@
#define MX1_DDIR 0x00
#define MX1_OCR 0x04
#define MX1_ICONFA 0x0c
-#define MX1_ICONFB 0x10
+#define MX1_ICONFB 0x14
#define MX1_GIUS 0x20
#define MX1_GPR 0x38
#define MX1_PUEN 0x40
@@ -97,13 +97,13 @@
u32 old_val;
u32 new_val;
- dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
- reg, offset, value);
-
/* Use the next register if the pin's port pin number is >=16 */
if (pin_id % 32 >= 16)
reg += 0x04;
+ dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
+ reg, offset, value);
+
/* Get current state of pins */
old_val = readl(reg);
old_val &= mask;
@@ -139,7 +139,7 @@
u32 reg_offset)
{
void __iomem *reg = imx1_mem(ipctl, pin_id) + reg_offset;
- int offset = pin_id % 16;
+ int offset = (pin_id % 16) * 2;
/* Use the next register if the pin's port pin number is >=16 */
if (pin_id % 32 >= 16)
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index a2e93a2..e767355 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -645,7 +645,7 @@
GFP_KERNEL);
if (!pmx->regs) {
dev_err(&pdev->dev, "Can't alloc regs pointer\n");
- return -ENODEV;
+ return -ENOMEM;
}
for (i = 0; i < pmx->nbanks; i++) {
diff --git a/drivers/pinctrl/sirf/pinctrl-prima2.c b/drivers/pinctrl/sirf/pinctrl-prima2.c
index 37b4265..dde0285 100644
--- a/drivers/pinctrl/sirf/pinctrl-prima2.c
+++ b/drivers/pinctrl/sirf/pinctrl-prima2.c
@@ -413,7 +413,7 @@
.funcval = 0,
};
-static const unsigned ac97_pins[] = { 33, 34, 35, 36 };
+static const unsigned ac97_pins[] = { 43, 44, 45, 46 };
static const struct sirfsoc_muxmask spi1_muxmask[] = {
{
diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c
index b28d1af..9802b67 100644
--- a/drivers/pinctrl/vt8500/pinctrl-wmt.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
@@ -276,7 +276,20 @@
if (!configs)
return -ENOMEM;
- configs[0] = pull;
+ switch (pull) {
+ case 0:
+ configs[0] = PIN_CONFIG_BIAS_DISABLE;
+ break;
+ case 1:
+ configs[0] = PIN_CONFIG_BIAS_PULL_DOWN;
+ break;
+ case 2:
+ configs[0] = PIN_CONFIG_BIAS_PULL_UP;
+ break;
+ default:
+ configs[0] = PIN_CONFIG_BIAS_DISABLE;
+ dev_err(data->dev, "invalid pull state %d - disabling\n", pull);
+ }
map->type = PIN_MAP_TYPE_CONFIGS_PIN;
map->data.configs.group_or_pin = data->groups[group];
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index 5631748..041f9b6 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -192,7 +192,7 @@
/*
* Voltage is measured in units of 1.22mV. The voltage is stored as
- * a 10-bit number plus sign, in the upper bits of a 16-bit register
+ * a 12-bit number plus sign, in the upper bits of a 16-bit register
*/
err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
if (err)
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index 80edb7d..0b4cf9d 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -444,8 +444,6 @@
ret = PTR_ERR(isp->phy);
goto fail0;
}
- if (!isp->phy)
- goto fail0;
isp->dev = &pdev->dev;
platform_set_drvdata(pdev, isp);
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index c7ff6d6..0fbac86 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -148,7 +148,7 @@
{
struct max17040_chip *chip = i2c_get_clientdata(client);
- if (chip->pdata->battery_online)
+ if (chip->pdata && chip->pdata->battery_online)
chip->online = chip->pdata->battery_online();
else
chip->online = 1;
@@ -158,7 +158,8 @@
{
struct max17040_chip *chip = i2c_get_clientdata(client);
- if (!chip->pdata->charger_online || !chip->pdata->charger_enable) {
+ if (!chip->pdata || !chip->pdata->charger_online
+ || !chip->pdata->charger_enable) {
chip->status = POWER_SUPPLY_STATUS_UNKNOWN;
return;
}
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 77b46d0..e10febe 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -498,7 +498,7 @@
struct ab3100_platform_data *plfdata,
struct regulator_init_data *init_data,
struct device_node *np,
- int id)
+ unsigned long id)
{
struct regulator_desc *desc;
struct ab3100_regulator *reg;
@@ -646,7 +646,7 @@
err = ab3100_regulator_register(
pdev, NULL, ab3100_regulator_matches[i].init_data,
ab3100_regulator_matches[i].of_node,
- (int) ab3100_regulator_matches[i].driver_data);
+ (unsigned long)ab3100_regulator_matches[i].driver_data);
if (err) {
ab3100_regulators_remove(pdev);
return err;
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index b38a6b6..16a309e 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1272,6 +1272,8 @@
if (r->dev.parent &&
node == r->dev.of_node)
return r;
+ *ret = -EPROBE_DEFER;
+ return NULL;
} else {
/*
* If we couldn't even get the node then it's
@@ -1312,7 +1314,7 @@
struct regulator_dev *rdev;
struct regulator *regulator = ERR_PTR(-EPROBE_DEFER);
const char *devname = NULL;
- int ret = -EPROBE_DEFER;
+ int ret;
if (id == NULL) {
pr_err("get() with no identifier\n");
@@ -1322,6 +1324,11 @@
if (dev)
devname = dev_name(dev);
+ if (have_full_constraints())
+ ret = -ENODEV;
+ else
+ ret = -EPROBE_DEFER;
+
mutex_lock(®ulator_list_mutex);
rdev = regulator_dev_lookup(dev, id, &ret);
diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
index 7f34020..b14ebda 100644
--- a/drivers/regulator/da9055-regulator.c
+++ b/drivers/regulator/da9055-regulator.c
@@ -576,7 +576,9 @@
/* Only LDO 5 and 6 has got the over current interrupt */
if (pdev->id == DA9055_ID_LDO5 || pdev->id == DA9055_ID_LDO6) {
irq = platform_get_irq_byname(pdev, "REGULATOR");
- irq = regmap_irq_get_virq(da9055->irq_data, irq);
+ if (irq < 0)
+ return irq;
+
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
da9055_ldo5_6_oc_irq,
IRQF_TRIGGER_HIGH |
diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c
index b1078ba3..186df87 100644
--- a/drivers/regulator/max14577.c
+++ b/drivers/regulator/max14577.c
@@ -168,10 +168,11 @@
MAX14577_REG_MAX);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
- return ret;
}
- return 0;
+ of_node_put(np);
+
+ return ret;
}
static inline struct regulator_init_data *match_init_data(int index)
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index d9e5579..cd0b9e35 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -441,6 +441,7 @@
for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) {
if (!reg_np) {
config.init_data = pdata->regulators[i].initdata;
+ config.of_node = pdata->regulators[i].reg_node;
} else {
config.init_data = rdata[i].init_data;
config.of_node = rdata[i].of_node;
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 309b8b3..5963743 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -24,7 +24,7 @@
#include <mach/at91_rtt.h>
#include <mach/cpu.h>
-
+#include <mach/hardware.h>
/*
* This driver uses two configurable hardware resources that live in the
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index a355f2b..cccbf9d 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -32,7 +32,6 @@
#include <mach/hardware.h>
-#define TIMER_FREQ CLOCK_TICK_RATE
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
#define MAXFREQ_PERIODIC 1000
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 88e35d8..8ee88c4 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -342,8 +342,9 @@
*/
int cio_commit_config(struct subchannel *sch)
{
- struct schib schib;
int ccode, retry, ret = 0;
+ struct schib schib;
+ struct irb irb;
if (stsch_err(sch->schid, &schib) || !css_sch_is_valid(&schib))
return -ENODEV;
@@ -367,7 +368,10 @@
ret = -EAGAIN;
break;
case 1: /* status pending */
- return -EBUSY;
+ ret = -EBUSY;
+ if (tsch(sch->schid, &irb))
+ return ret;
+ break;
case 2: /* busy */
udelay(100); /* allow for recovery */
ret = -EBUSY;
@@ -403,7 +407,6 @@
*/
int cio_enable_subchannel(struct subchannel *sch, u32 intparm)
{
- int retry;
int ret;
CIO_TRACE_EVENT(2, "ensch");
@@ -418,20 +421,14 @@
sch->config.isc = sch->isc;
sch->config.intparm = intparm;
- for (retry = 0; retry < 3; retry++) {
+ ret = cio_commit_config(sch);
+ if (ret == -EIO) {
+ /*
+ * Got a program check in msch. Try without
+ * the concurrent sense bit the next time.
+ */
+ sch->config.csense = 0;
ret = cio_commit_config(sch);
- if (ret == -EIO) {
- /*
- * Got a program check in msch. Try without
- * the concurrent sense bit the next time.
- */
- sch->config.csense = 0;
- } else if (ret == -EBUSY) {
- struct irb irb;
- if (tsch(sch->schid, &irb) != 0)
- break;
- } else
- break;
}
CIO_HEX_EVENT(2, &ret, sizeof(ret));
return ret;
@@ -444,7 +441,6 @@
*/
int cio_disable_subchannel(struct subchannel *sch)
{
- int retry;
int ret;
CIO_TRACE_EVENT(2, "dissch");
@@ -456,16 +452,8 @@
return -ENODEV;
sch->config.ena = 0;
+ ret = cio_commit_config(sch);
- for (retry = 0; retry < 3; retry++) {
- ret = cio_commit_config(sch);
- if (ret == -EBUSY) {
- struct irb irb;
- if (tsch(sch->schid, &irb) != 0)
- break;
- } else
- break;
- }
CIO_HEX_EVENT(2, &ret, sizeof(ret));
return ret;
}
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index 8acaae1..a563e4c 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -359,14 +359,12 @@
#define need_siga_sync_out_after_pci(q) \
(unlikely(q->irq_ptr->siga_flag.sync_out_after_pci))
-#define for_each_input_queue(irq_ptr, q, i) \
- for (i = 0, q = irq_ptr->input_qs[0]; \
- i < irq_ptr->nr_input_qs; \
- q = irq_ptr->input_qs[++i])
-#define for_each_output_queue(irq_ptr, q, i) \
- for (i = 0, q = irq_ptr->output_qs[0]; \
- i < irq_ptr->nr_output_qs; \
- q = irq_ptr->output_qs[++i])
+#define for_each_input_queue(irq_ptr, q, i) \
+ for (i = 0; i < irq_ptr->nr_input_qs && \
+ ({ q = irq_ptr->input_qs[i]; 1; }); i++)
+#define for_each_output_queue(irq_ptr, q, i) \
+ for (i = 0; i < irq_ptr->nr_output_qs && \
+ ({ q = irq_ptr->output_qs[i]; 1; }); i++)
#define prev_buf(bufnr) \
((bufnr + QDIO_MAX_BUFFERS_MASK) & QDIO_MAX_BUFFERS_MASK)
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index c883a08..77466c4 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -996,7 +996,7 @@
}
}
- if (!pci_out_supported(q))
+ if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED))
return;
for_each_output_queue(irq_ptr, q, i) {
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 9e80d61..2eb97d7 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -2595,8 +2595,6 @@
return -ENOMEM;
}
- INIT_LIST_HEAD(&cmd->cmd_list);
-
memcpy(&cmd->atio, atio, sizeof(*atio));
cmd->state = QLA_TGT_STATE_NEW;
cmd->tgt = vha->vha_tgt.qla_tgt;
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 1d10eec..66e755c 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -855,7 +855,6 @@
uint16_t loop_id; /* to save extra sess dereferences */
struct qla_tgt *tgt; /* to save extra sess dereferences */
struct scsi_qla_host *vha;
- struct list_head cmd_list;
struct atio_from_isp atio;
};
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ba9310b..581ee2a 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -376,10 +376,10 @@
def_tristate SPI_PXA2XX && PCI
config SPI_RSPI
- tristate "Renesas RSPI controller"
+ tristate "Renesas RSPI/QSPI controller"
depends on (SUPERH && SH_DMAE_BASE) || ARCH_SHMOBILE
help
- SPI driver for Renesas RSPI blocks.
+ SPI driver for Renesas RSPI and QSPI blocks.
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index 5040630..bae97ff 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -361,6 +361,8 @@
init_completion(&hw->done);
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ if (hw->pdata->lsb)
+ master->mode_bits |= SPI_LSB_FIRST;
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = hw->pdata->bus_num;
hw->bitbang.master = hw->master;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 23756b0..d0b28bb 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -755,9 +755,7 @@
ret = master->transfer_one_message(master, master->cur_msg);
if (ret) {
dev_err(&master->dev,
- "failed to transfer one message from queue: %d\n", ret);
- master->cur_msg->status = ret;
- spi_finalize_current_message(master);
+ "failed to transfer one message from queue\n");
return;
}
}
diff --git a/drivers/staging/android/ashmem.c b/drivers/staging/android/ashmem.c
index 23948f1..713a972 100644
--- a/drivers/staging/android/ashmem.c
+++ b/drivers/staging/android/ashmem.c
@@ -295,21 +295,29 @@
/* If size is not set, or set to 0, always return EOF. */
if (asma->size == 0)
- goto out;
+ goto out_unlock;
if (!asma->file) {
ret = -EBADF;
- goto out;
+ goto out_unlock;
}
+ mutex_unlock(&ashmem_mutex);
+
+ /*
+ * asma and asma->file are used outside the lock here. We assume
+ * once asma->file is set it will never be changed, and will not
+ * be destroyed until all references to the file are dropped and
+ * ashmem_release is called.
+ */
ret = asma->file->f_op->read(asma->file, buf, len, pos);
- if (ret < 0)
- goto out;
+ if (ret >= 0) {
+ /** Update backing file pos, since f_ops->read() doesn't */
+ asma->file->f_pos = *pos;
+ }
+ return ret;
- /** Update backing file pos, since f_ops->read() doesn't */
- asma->file->f_pos = *pos;
-
-out:
+out_unlock:
mutex_unlock(&ashmem_mutex);
return ret;
}
@@ -498,6 +506,7 @@
static int set_name(struct ashmem_area *asma, void __user *name)
{
+ int len;
int ret = 0;
char local_name[ASHMEM_NAME_LEN];
@@ -510,21 +519,19 @@
* variable that does not need protection and later copy the local
* variable to the structure member with lock held.
*/
- if (copy_from_user(local_name, name, ASHMEM_NAME_LEN))
- return -EFAULT;
-
+ len = strncpy_from_user(local_name, name, ASHMEM_NAME_LEN);
+ if (len < 0)
+ return len;
+ if (len == ASHMEM_NAME_LEN)
+ local_name[ASHMEM_NAME_LEN - 1] = '\0';
mutex_lock(&ashmem_mutex);
/* cannot change an existing mapping's name */
- if (unlikely(asma->file)) {
+ if (unlikely(asma->file))
ret = -EINVAL;
- goto out;
- }
- memcpy(asma->name + ASHMEM_NAME_PREFIX_LEN,
- local_name, ASHMEM_NAME_LEN);
- asma->name[ASHMEM_FULL_NAME_LEN-1] = '\0';
-out:
- mutex_unlock(&ashmem_mutex);
+ else
+ strcpy(asma->name + ASHMEM_NAME_PREFIX_LEN, local_name);
+ mutex_unlock(&ashmem_mutex);
return ret;
}
diff --git a/drivers/staging/android/ion/compat_ion.c b/drivers/staging/android/ion/compat_ion.c
index af6cd37..ee3a738 100644
--- a/drivers/staging/android/ion/compat_ion.c
+++ b/drivers/staging/android/ion/compat_ion.c
@@ -35,9 +35,14 @@
compat_ulong_t arg;
};
+struct compat_ion_handle_data {
+ compat_int_t handle;
+};
+
#define COMPAT_ION_IOC_ALLOC _IOWR(ION_IOC_MAGIC, 0, \
struct compat_ion_allocation_data)
-#define COMPAT_ION_IOC_FREE _IOWR(ION_IOC_MAGIC, 1, struct ion_handle_data)
+#define COMPAT_ION_IOC_FREE _IOWR(ION_IOC_MAGIC, 1, \
+ struct compat_ion_handle_data)
#define COMPAT_ION_IOC_CUSTOM _IOWR(ION_IOC_MAGIC, 6, \
struct compat_ion_custom_data)
@@ -64,6 +69,19 @@
return err;
}
+static int compat_get_ion_handle_data(
+ struct compat_ion_handle_data __user *data32,
+ struct ion_handle_data __user *data)
+{
+ compat_int_t i;
+ int err;
+
+ err = get_user(i, &data32->handle);
+ err |= put_user(i, &data->handle);
+
+ return err;
+}
+
static int compat_put_ion_allocation_data(
struct compat_ion_allocation_data __user *data32,
struct ion_allocation_data __user *data)
@@ -132,8 +150,8 @@
}
case COMPAT_ION_IOC_FREE:
{
- struct compat_ion_allocation_data __user *data32;
- struct ion_allocation_data __user *data;
+ struct compat_ion_handle_data __user *data32;
+ struct ion_handle_data __user *data;
int err;
data32 = compat_ptr(arg);
@@ -141,7 +159,7 @@
if (data == NULL)
return -EFAULT;
- err = compat_get_ion_allocation_data(data32, data);
+ err = compat_get_ion_handle_data(data32, data);
if (err)
return err;
diff --git a/drivers/staging/android/ion/ion_dummy_driver.c b/drivers/staging/android/ion/ion_dummy_driver.c
index 55b2002..01cdc8a 100644
--- a/drivers/staging/android/ion/ion_dummy_driver.c
+++ b/drivers/staging/android/ion/ion_dummy_driver.c
@@ -17,9 +17,11 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/sizes.h>
+#include <linux/io.h>
#include "ion.h"
#include "ion_priv.h"
@@ -57,7 +59,7 @@
};
struct ion_platform_data dummy_ion_pdata = {
- .nr = 4,
+ .nr = ARRAY_SIZE(dummy_heaps),
.heaps = dummy_heaps,
};
@@ -69,7 +71,7 @@
heaps = kzalloc(sizeof(struct ion_heap *) * dummy_ion_pdata.nr,
GFP_KERNEL);
if (!heaps)
- return PTR_ERR(heaps);
+ return -ENOMEM;
/* Allocate a dummy carveout heap */
@@ -128,6 +130,7 @@
}
return err;
}
+device_initcall(ion_dummy_init);
static void __exit ion_dummy_exit(void)
{
@@ -152,7 +155,4 @@
return;
}
-
-module_init(ion_dummy_init);
-module_exit(ion_dummy_exit);
-
+__exitcall(ion_dummy_exit);
diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c
index 296c74f..37e64d5 100644
--- a/drivers/staging/android/ion/ion_heap.c
+++ b/drivers/staging/android/ion/ion_heap.c
@@ -243,12 +243,12 @@
init_waitqueue_head(&heap->waitqueue);
heap->task = kthread_run(ion_heap_deferred_free, heap,
"%s", heap->name);
- sched_setscheduler(heap->task, SCHED_IDLE, ¶m);
if (IS_ERR(heap->task)) {
pr_err("%s: creating thread for deferred free failed\n",
__func__);
return PTR_RET(heap->task);
}
+ sched_setscheduler(heap->task, SCHED_IDLE, ¶m);
return 0;
}
diff --git a/drivers/staging/android/ion/ion_priv.h b/drivers/staging/android/ion/ion_priv.h
index d986739..fc2e4fc 100644
--- a/drivers/staging/android/ion/ion_priv.h
+++ b/drivers/staging/android/ion/ion_priv.h
@@ -17,6 +17,7 @@
#ifndef _ION_PRIV_H
#define _ION_PRIV_H
+#include <linux/device.h>
#include <linux/dma-direction.h>
#include <linux/kref.h>
#include <linux/mm_types.h>
diff --git a/drivers/staging/android/ion/ion_system_heap.c b/drivers/staging/android/ion/ion_system_heap.c
index 7f07291..9849f39 100644
--- a/drivers/staging/android/ion/ion_system_heap.c
+++ b/drivers/staging/android/ion/ion_system_heap.c
@@ -124,6 +124,7 @@
info->page = page;
info->order = orders[i];
+ INIT_LIST_HEAD(&info->list);
return info;
}
kfree(info);
@@ -145,12 +146,15 @@
struct list_head pages;
struct page_info *info, *tmp_info;
int i = 0;
- long size_remaining = PAGE_ALIGN(size);
+ unsigned long size_remaining = PAGE_ALIGN(size);
unsigned int max_order = orders[0];
if (align > PAGE_SIZE)
return -EINVAL;
+ if (size / PAGE_SIZE > totalram_pages / 2)
+ return -ENOMEM;
+
INIT_LIST_HEAD(&pages);
while (size_remaining > 0) {
info = alloc_largest_available(sys_heap, buffer, size_remaining,
diff --git a/drivers/staging/android/sw_sync.h b/drivers/staging/android/sw_sync.h
index 585040b..5aaf71d 100644
--- a/drivers/staging/android/sw_sync.h
+++ b/drivers/staging/android/sw_sync.h
@@ -35,10 +35,27 @@
u32 value;
};
+#if IS_ENABLED(CONFIG_SW_SYNC)
struct sw_sync_timeline *sw_sync_timeline_create(const char *name);
void sw_sync_timeline_inc(struct sw_sync_timeline *obj, u32 inc);
struct sync_pt *sw_sync_pt_create(struct sw_sync_timeline *obj, u32 value);
+#else
+static inline struct sw_sync_timeline *sw_sync_timeline_create(const char *name)
+{
+ return NULL;
+}
+
+static inline void sw_sync_timeline_inc(struct sw_sync_timeline *obj, u32 inc)
+{
+}
+
+static inline struct sync_pt *sw_sync_pt_create(struct sw_sync_timeline *obj,
+ u32 value)
+{
+ return NULL;
+}
+#endif /* IS_ENABLED(CONFIG_SW_SYNC) */
#endif /* __KERNEL __ */
diff --git a/drivers/staging/android/sync.c b/drivers/staging/android/sync.c
index 38e5d3b..3d05f662 100644
--- a/drivers/staging/android/sync.c
+++ b/drivers/staging/android/sync.c
@@ -79,27 +79,27 @@
container_of(kref, struct sync_timeline, kref);
unsigned long flags;
- if (obj->ops->release_obj)
- obj->ops->release_obj(obj);
-
spin_lock_irqsave(&sync_timeline_list_lock, flags);
list_del(&obj->sync_timeline_list);
spin_unlock_irqrestore(&sync_timeline_list_lock, flags);
+ if (obj->ops->release_obj)
+ obj->ops->release_obj(obj);
+
kfree(obj);
}
void sync_timeline_destroy(struct sync_timeline *obj)
{
obj->destroyed = true;
+ smp_wmb();
/*
- * If this is not the last reference, signal any children
- * that their parent is going away.
+ * signal any children that their parent is going away.
*/
+ sync_timeline_signal(obj);
- if (!kref_put(&obj->kref, sync_timeline_free))
- sync_timeline_signal(obj);
+ kref_put(&obj->kref, sync_timeline_free);
}
EXPORT_SYMBOL(sync_timeline_destroy);
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index 2460803..5b15033 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -616,8 +616,6 @@
ret = driver->auto_attach(dev, context);
if (ret >= 0)
ret = comedi_device_postconfig(dev);
- if (ret < 0)
- comedi_device_detach(dev);
mutex_unlock(&dev->mutex);
if (ret < 0) {
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 593676c..d9ad2c0 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -494,6 +494,7 @@
struct comedi_insn *insn, unsigned int *data)
{
struct pci1710_private *devpriv = dev->private;
+ unsigned int val;
int n, chan, range, ofs;
chan = CR_CHAN(insn->chanspec);
@@ -509,11 +510,14 @@
outw(devpriv->da_ranges, dev->iobase + PCI171x_DAREF);
ofs = PCI171x_DA1;
}
+ val = devpriv->ao_data[chan];
- for (n = 0; n < insn->n; n++)
- outw(data[n], dev->iobase + ofs);
+ for (n = 0; n < insn->n; n++) {
+ val = data[n];
+ outw(val, dev->iobase + ofs);
+ }
- devpriv->ao_data[chan] = data[n];
+ devpriv->ao_data[chan] = val;
return n;
@@ -679,6 +683,7 @@
struct comedi_insn *insn, unsigned int *data)
{
struct pci1710_private *devpriv = dev->private;
+ unsigned int val;
int n, rangereg, chan;
chan = CR_CHAN(insn->chanspec);
@@ -688,13 +693,15 @@
outb(rangereg, dev->iobase + PCI1720_RANGE);
devpriv->da_ranges = rangereg;
}
+ val = devpriv->ao_data[chan];
for (n = 0; n < insn->n; n++) {
- outw(data[n], dev->iobase + PCI1720_DA0 + (chan << 1));
+ val = data[n];
+ outw(val, dev->iobase + PCI1720_DA0 + (chan << 1));
outb(0, dev->iobase + PCI1720_SYNCOUT); /* update outputs */
}
- devpriv->ao_data[chan] = data[n];
+ devpriv->ao_data[chan] = val;
return n;
}
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index 3beeb12..88c60b6 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -48,6 +48,7 @@
#include <linux/usb.h>
#include <linux/fcntl.h>
#include <linux/compiler.h>
+#include <asm/unaligned.h>
#include "comedi_fc.h"
#include "../comedidev.h"
@@ -792,7 +793,8 @@
}
/* 32 bits big endian from the A/D converter */
- val = be32_to_cpu(*((uint32_t *)((devpriv->insn_buf) + 1)));
+ val = be32_to_cpu(get_unaligned((uint32_t
+ *)(devpriv->insn_buf + 1)));
val &= 0x00ffffff; /* strip status byte */
val ^= 0x00800000; /* convert to unsigned */
@@ -1357,7 +1359,7 @@
return ret;
/* 32 bits big endian from the A/D converter */
- val = be32_to_cpu(*((uint32_t *)((devpriv->insn_buf)+1)));
+ val = be32_to_cpu(get_unaligned((uint32_t *)(devpriv->insn_buf + 1)));
val &= 0x00ffffff; /* strip status byte */
val ^= 0x00800000; /* convert to unsigned */
diff --git a/drivers/staging/dgrp/dgrp_net_ops.c b/drivers/staging/dgrp/dgrp_net_ops.c
index 1f61b89..33ac7fb 100644
--- a/drivers/staging/dgrp/dgrp_net_ops.c
+++ b/drivers/staging/dgrp/dgrp_net_ops.c
@@ -2232,177 +2232,6 @@
return rtn;
}
-/*
- * Common Packet Handling code
- */
-
-static void handle_data_in_packet(struct nd_struct *nd, struct ch_struct *ch,
- long dlen, long plen, int n1, u8 *dbuf)
-{
- char *error;
- long n;
- long remain;
- u8 *buf;
- u8 *b;
-
- remain = nd->nd_remain;
- nd->nd_tx_work = 1;
-
- /*
- * Otherwise data should appear only when we are
- * in the CS_READY state.
- */
-
- if (ch->ch_state < CS_READY) {
- error = "Data received before RWIN established";
- nd->nd_remain = 0;
- nd->nd_state = NS_SEND_ERROR;
- nd->nd_error = error;
- }
-
- /*
- * Assure that the data received is within the
- * allowable window.
- */
-
- n = (ch->ch_s_rwin - ch->ch_s_rin) & 0xffff;
-
- if (dlen > n) {
- error = "Receive data overrun";
- nd->nd_remain = 0;
- nd->nd_state = NS_SEND_ERROR;
- nd->nd_error = error;
- }
-
- /*
- * If we received 3 or less characters,
- * assume it is a human typing, and set RTIME
- * to 10 milliseconds.
- *
- * If we receive 10 or more characters,
- * assume its not a human typing, and set RTIME
- * to 100 milliseconds.
- */
-
- if (ch->ch_edelay != DGRP_RTIME) {
- if (ch->ch_rtime != ch->ch_edelay) {
- ch->ch_rtime = ch->ch_edelay;
- ch->ch_flag |= CH_PARAM;
- }
- } else if (dlen <= 3) {
- if (ch->ch_rtime != 10) {
- ch->ch_rtime = 10;
- ch->ch_flag |= CH_PARAM;
- }
- } else {
- if (ch->ch_rtime != DGRP_RTIME) {
- ch->ch_rtime = DGRP_RTIME;
- ch->ch_flag |= CH_PARAM;
- }
- }
-
- /*
- * If a portion of the packet is outside the
- * buffer, shorten the effective length of the
- * data packet to be the amount of data received.
- */
-
- if (remain < plen)
- dlen -= plen - remain;
-
- /*
- * Detect if receive flush is now complete.
- */
-
- if ((ch->ch_flag & CH_RX_FLUSH) != 0 &&
- ((ch->ch_flush_seq - nd->nd_seq_out) & SEQ_MASK) >=
- ((nd->nd_seq_in - nd->nd_seq_out) & SEQ_MASK)) {
- ch->ch_flag &= ~CH_RX_FLUSH;
- }
-
- /*
- * If we are ready to receive, move the data into
- * the receive buffer.
- */
-
- ch->ch_s_rin = (ch->ch_s_rin + dlen) & 0xffff;
-
- if (ch->ch_state == CS_READY &&
- (ch->ch_tun.un_open_count != 0) &&
- (ch->ch_tun.un_flag & UN_CLOSING) == 0 &&
- (ch->ch_cflag & CF_CREAD) != 0 &&
- (ch->ch_flag & (CH_BAUD0 | CH_RX_FLUSH)) == 0 &&
- (ch->ch_send & RR_RX_FLUSH) == 0) {
-
- if (ch->ch_rin + dlen >= RBUF_MAX) {
- n = RBUF_MAX - ch->ch_rin;
-
- memcpy(ch->ch_rbuf + ch->ch_rin, dbuf, n);
-
- ch->ch_rin = 0;
- dbuf += n;
- dlen -= n;
- }
-
- memcpy(ch->ch_rbuf + ch->ch_rin, dbuf, dlen);
-
- ch->ch_rin += dlen;
-
-
- /*
- * If we are not in fastcook mode, or
- * if there is a fastcook thread
- * waiting for data, send the data to
- * the line discipline.
- */
-
- if ((ch->ch_flag & CH_FAST_READ) == 0 ||
- ch->ch_inwait != 0) {
- dgrp_input(ch);
- }
-
- /*
- * If there is a read thread waiting
- * in select, and we are in fastcook
- * mode, wake him up.
- */
-
- if (waitqueue_active(&ch->ch_tun.un_tty->read_wait) &&
- (ch->ch_flag & CH_FAST_READ) != 0)
- wake_up_interruptible(&ch->ch_tun.un_tty->read_wait);
-
- /*
- * Wake any thread waiting in the
- * fastcook loop.
- */
-
- if ((ch->ch_flag & CH_INPUT) != 0) {
- ch->ch_flag &= ~CH_INPUT;
- wake_up_interruptible(&ch->ch_flag_wait);
- }
- }
-
- /*
- * Fabricate and insert a data packet header to
- * preced the remaining data when it comes in.
- */
-
- if (remain < plen) {
- dlen = plen - remain;
- b = buf;
-
- b[0] = 0x90 + n1;
- put_unaligned_be16(dlen, b + 1);
-
- remain = 3;
- if (remain > 0 && b != buf)
- memcpy(buf, b, remain);
-
- nd->nd_remain = remain;
- return;
- }
-}
-
/**
* dgrp_receive() -- decode data packets received from the remote PortServer.
* @nd: pointer to a node structure
@@ -2477,8 +2306,7 @@
plen = dlen + 1;
dbuf = b + 1;
- handle_data_in_packet(nd, ch, dlen, plen, n1, dbuf);
- break;
+ goto data;
/*
* Process 2-byte header data packet.
@@ -2492,8 +2320,7 @@
plen = dlen + 2;
dbuf = b + 2;
- handle_data_in_packet(nd, ch, dlen, plen, n1, dbuf);
- break;
+ goto data;
/*
* Process 3-byte header data packet.
@@ -2508,6 +2335,159 @@
dbuf = b + 3;
+ /*
+ * Common packet handling code.
+ */
+
+data:
+ nd->nd_tx_work = 1;
+
+ /*
+ * Otherwise data should appear only when we are
+ * in the CS_READY state.
+ */
+
+ if (ch->ch_state < CS_READY) {
+ error = "Data received before RWIN established";
+ goto prot_error;
+ }
+
+ /*
+ * Assure that the data received is within the
+ * allowable window.
+ */
+
+ n = (ch->ch_s_rwin - ch->ch_s_rin) & 0xffff;
+
+ if (dlen > n) {
+ error = "Receive data overrun";
+ goto prot_error;
+ }
+
+ /*
+ * If we received 3 or less characters,
+ * assume it is a human typing, and set RTIME
+ * to 10 milliseconds.
+ *
+ * If we receive 10 or more characters,
+ * assume its not a human typing, and set RTIME
+ * to 100 milliseconds.
+ */
+
+ if (ch->ch_edelay != DGRP_RTIME) {
+ if (ch->ch_rtime != ch->ch_edelay) {
+ ch->ch_rtime = ch->ch_edelay;
+ ch->ch_flag |= CH_PARAM;
+ }
+ } else if (dlen <= 3) {
+ if (ch->ch_rtime != 10) {
+ ch->ch_rtime = 10;
+ ch->ch_flag |= CH_PARAM;
+ }
+ } else {
+ if (ch->ch_rtime != DGRP_RTIME) {
+ ch->ch_rtime = DGRP_RTIME;
+ ch->ch_flag |= CH_PARAM;
+ }
+ }
+
+ /*
+ * If a portion of the packet is outside the
+ * buffer, shorten the effective length of the
+ * data packet to be the amount of data received.
+ */
+
+ if (remain < plen)
+ dlen -= plen - remain;
+
+ /*
+ * Detect if receive flush is now complete.
+ */
+
+ if ((ch->ch_flag & CH_RX_FLUSH) != 0 &&
+ ((ch->ch_flush_seq - nd->nd_seq_out) & SEQ_MASK) >=
+ ((nd->nd_seq_in - nd->nd_seq_out) & SEQ_MASK)) {
+ ch->ch_flag &= ~CH_RX_FLUSH;
+ }
+
+ /*
+ * If we are ready to receive, move the data into
+ * the receive buffer.
+ */
+
+ ch->ch_s_rin = (ch->ch_s_rin + dlen) & 0xffff;
+
+ if (ch->ch_state == CS_READY &&
+ (ch->ch_tun.un_open_count != 0) &&
+ (ch->ch_tun.un_flag & UN_CLOSING) == 0 &&
+ (ch->ch_cflag & CF_CREAD) != 0 &&
+ (ch->ch_flag & (CH_BAUD0 | CH_RX_FLUSH)) == 0 &&
+ (ch->ch_send & RR_RX_FLUSH) == 0) {
+
+ if (ch->ch_rin + dlen >= RBUF_MAX) {
+ n = RBUF_MAX - ch->ch_rin;
+
+ memcpy(ch->ch_rbuf + ch->ch_rin, dbuf, n);
+
+ ch->ch_rin = 0;
+ dbuf += n;
+ dlen -= n;
+ }
+
+ memcpy(ch->ch_rbuf + ch->ch_rin, dbuf, dlen);
+
+ ch->ch_rin += dlen;
+
+
+ /*
+ * If we are not in fastcook mode, or
+ * if there is a fastcook thread
+ * waiting for data, send the data to
+ * the line discipline.
+ */
+
+ if ((ch->ch_flag & CH_FAST_READ) == 0 ||
+ ch->ch_inwait != 0) {
+ dgrp_input(ch);
+ }
+
+ /*
+ * If there is a read thread waiting
+ * in select, and we are in fastcook
+ * mode, wake him up.
+ */
+
+ if (waitqueue_active(&ch->ch_tun.un_tty->read_wait) &&
+ (ch->ch_flag & CH_FAST_READ) != 0)
+ wake_up_interruptible(&ch->ch_tun.un_tty->read_wait);
+
+ /*
+ * Wake any thread waiting in the
+ * fastcook loop.
+ */
+
+ if ((ch->ch_flag & CH_INPUT) != 0) {
+ ch->ch_flag &= ~CH_INPUT;
+
+ wake_up_interruptible(&ch->ch_flag_wait);
+ }
+ }
+
+ /*
+ * Fabricate and insert a data packet header to
+ * preced the remaining data when it comes in.
+ */
+
+ if (remain < plen) {
+ dlen = plen - remain;
+ b = buf;
+
+ b[0] = 0x90 + n1;
+ put_unaligned_be16(dlen, b + 1);
+
+ remain = 3;
+ goto done;
+ }
break;
/*
diff --git a/drivers/staging/gdm72xx/gdm_usb.c b/drivers/staging/gdm72xx/gdm_usb.c
index f8788bf..cdeffe7 100644
--- a/drivers/staging/gdm72xx/gdm_usb.c
+++ b/drivers/staging/gdm72xx/gdm_usb.c
@@ -635,11 +635,14 @@
#endif /* CONFIG_WIMAX_GDM72XX_USB_PM */
ret = register_wimax_device(phy_dev, &intf->dev);
+ if (ret)
+ release_usb(udev);
out:
if (ret) {
kfree(phy_dev);
kfree(udev);
+ usb_put_dev(usbdev);
} else {
usb_set_intfdata(intf, phy_dev);
}
diff --git a/drivers/staging/iio/Documentation/iio_utils.h b/drivers/staging/iio/Documentation/iio_utils.h
index 35154d6..c9fedb7 100644
--- a/drivers/staging/iio/Documentation/iio_utils.h
+++ b/drivers/staging/iio/Documentation/iio_utils.h
@@ -77,7 +77,6 @@
uint64_t mask;
unsigned be;
unsigned is_signed;
- unsigned enabled;
unsigned location;
};
@@ -335,6 +334,7 @@
while (ent = readdir(dp), ent != NULL) {
if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"),
"_en") == 0) {
+ int current_enabled = 0;
current = &(*ci_array)[count++];
ret = asprintf(&filename,
"%s/%s", scan_el_dir, ent->d_name);
@@ -350,10 +350,10 @@
ret = -errno;
goto error_cleanup_array;
}
- fscanf(sysfsfp, "%u", ¤t->enabled);
+ fscanf(sysfsfp, "%u", ¤t_enabled);
fclose(sysfsfp);
- if (!current->enabled) {
+ if (!current_enabled) {
free(filename);
count--;
continue;
diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
index 5ea3641..5708ffc 100644
--- a/drivers/staging/iio/adc/ad799x_core.c
+++ b/drivers/staging/iio/adc/ad799x_core.c
@@ -393,7 +393,7 @@
}, {
.type = IIO_EV_TYPE_THRESH,
.dir = IIO_EV_DIR_FALLING,
- .mask_separate = BIT(IIO_EV_INFO_VALUE),
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE),
}, {
.type = IIO_EV_TYPE_THRESH,
@@ -409,7 +409,13 @@
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = (_index), \
- .scan_type = IIO_ST('u', _realbits, 16, 12 - (_realbits)), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (_realbits), \
+ .storagebits = 16, \
+ .shift = 12 - (_realbits), \
+ .endianness = IIO_BE, \
+ }, \
.event_spec = _ev_spec, \
.num_event_specs = _num_ev_spec, \
}
@@ -588,7 +594,8 @@
return 0;
error_free_irq:
- free_irq(client->irq, indio_dev);
+ if (client->irq > 0)
+ free_irq(client->irq, indio_dev);
error_cleanup_ring:
ad799x_ring_cleanup(indio_dev);
error_disable_reg:
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index df71669..7fc66a6 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -1035,8 +1035,6 @@
SHOW_SCALE_AVAILABLE_ATTR(5);
SHOW_SCALE_AVAILABLE_ATTR(6);
SHOW_SCALE_AVAILABLE_ATTR(7);
-SHOW_SCALE_AVAILABLE_ATTR(8);
-SHOW_SCALE_AVAILABLE_ATTR(9);
SHOW_SCALE_AVAILABLE_ATTR(10);
SHOW_SCALE_AVAILABLE_ATTR(11);
SHOW_SCALE_AVAILABLE_ATTR(12);
@@ -1053,8 +1051,6 @@
&iio_dev_attr_in_voltage5_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage6_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage7_scale_available.dev_attr.attr,
- &iio_dev_attr_in_voltage8_scale_available.dev_attr.attr,
- &iio_dev_attr_in_voltage9_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage10_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage11_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage12_scale_available.dev_attr.attr,
@@ -1613,7 +1609,7 @@
* of the array.
*/
scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >>
- (iio->channels[i].scan_type.realbits - s);
+ (LRADC_RESOLUTION - s);
lradc->scale_avail[i][s].nano =
do_div(scale_uv, 100000000) * 10;
lradc->scale_avail[i][s].integer = scale_uv;
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index 0a4298b..2b96665 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -629,7 +629,7 @@
struct iio_buffer *buffer;
buffer = iio_kfifo_allocate(indio_dev);
- if (buffer)
+ if (!buffer)
return -ENOMEM;
iio_device_attach_buffer(indio_dev, buffer);
diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
index 09ef5fb8..236ed66 100644
--- a/drivers/staging/imx-drm/imx-drm-core.c
+++ b/drivers/staging/imx-drm/imx-drm-core.c
@@ -88,9 +88,9 @@
imx_drm_device_put();
- drm_vblank_cleanup(imxdrm->drm);
- drm_kms_helper_poll_fini(imxdrm->drm);
- drm_mode_config_cleanup(imxdrm->drm);
+ drm_vblank_cleanup(drm);
+ drm_kms_helper_poll_fini(drm);
+ drm_mode_config_cleanup(drm);
return 0;
}
@@ -142,19 +142,19 @@
int imx_drm_crtc_vblank_get(struct imx_drm_crtc *imx_drm_crtc)
{
- return drm_vblank_get(imx_drm_crtc->imxdrm->drm, imx_drm_crtc->pipe);
+ return drm_vblank_get(imx_drm_crtc->crtc->dev, imx_drm_crtc->pipe);
}
EXPORT_SYMBOL_GPL(imx_drm_crtc_vblank_get);
void imx_drm_crtc_vblank_put(struct imx_drm_crtc *imx_drm_crtc)
{
- drm_vblank_put(imx_drm_crtc->imxdrm->drm, imx_drm_crtc->pipe);
+ drm_vblank_put(imx_drm_crtc->crtc->dev, imx_drm_crtc->pipe);
}
EXPORT_SYMBOL_GPL(imx_drm_crtc_vblank_put);
void imx_drm_handle_vblank(struct imx_drm_crtc *imx_drm_crtc)
{
- drm_handle_vblank(imx_drm_crtc->imxdrm->drm, imx_drm_crtc->pipe);
+ drm_handle_vblank(imx_drm_crtc->crtc->dev, imx_drm_crtc->pipe);
}
EXPORT_SYMBOL_GPL(imx_drm_handle_vblank);
@@ -370,29 +370,6 @@
}
/*
- * register a crtc to the drm core
- */
-static int imx_drm_crtc_register(struct imx_drm_crtc *imx_drm_crtc)
-{
- struct imx_drm_device *imxdrm = __imx_drm_device();
- int ret;
-
- ret = drm_mode_crtc_set_gamma_size(imx_drm_crtc->crtc, 256);
- if (ret)
- return ret;
-
- drm_crtc_helper_add(imx_drm_crtc->crtc,
- imx_drm_crtc->imx_drm_helper_funcs.crtc_helper_funcs);
-
- drm_crtc_init(imxdrm->drm, imx_drm_crtc->crtc,
- imx_drm_crtc->imx_drm_helper_funcs.crtc_funcs);
-
- drm_mode_group_reinit(imxdrm->drm);
-
- return 0;
-}
-
-/*
* Called by the CRTC driver when all CRTCs are registered. This
* puts all the pieces together and initializes the driver.
* Once this is called no more CRTCs can be registered since
@@ -424,15 +401,15 @@
mutex_lock(&imxdrm->mutex);
- drm_kms_helper_poll_init(imxdrm->drm);
+ drm_kms_helper_poll_init(drm);
/* setup the grouping for the legacy output */
- ret = drm_mode_group_init_legacy_group(imxdrm->drm,
- &imxdrm->drm->primary->mode_group);
+ ret = drm_mode_group_init_legacy_group(drm,
+ &drm->primary->mode_group);
if (ret)
goto err_kms;
- ret = drm_vblank_init(imxdrm->drm, MAX_CRTC);
+ ret = drm_vblank_init(drm, MAX_CRTC);
if (ret)
goto err_kms;
@@ -441,7 +418,7 @@
* by drm timer once a current process gives up ownership of
* vblank event.(after drm_vblank_put function is called)
*/
- imxdrm->drm->vblank_disable_allowed = true;
+ drm->vblank_disable_allowed = true;
if (!imx_drm_device_get()) {
ret = -EINVAL;
@@ -536,10 +513,18 @@
*new_crtc = imx_drm_crtc;
- ret = imx_drm_crtc_register(imx_drm_crtc);
+ ret = drm_mode_crtc_set_gamma_size(imx_drm_crtc->crtc, 256);
if (ret)
goto err_register;
+ drm_crtc_helper_add(crtc,
+ imx_drm_crtc->imx_drm_helper_funcs.crtc_helper_funcs);
+
+ drm_crtc_init(imxdrm->drm, crtc,
+ imx_drm_crtc->imx_drm_helper_funcs.crtc_funcs);
+
+ drm_mode_group_reinit(imxdrm->drm);
+
imx_drm_update_possible_crtcs();
mutex_unlock(&imxdrm->mutex);
diff --git a/drivers/staging/imx-drm/imx-hdmi.c b/drivers/staging/imx-drm/imx-hdmi.c
index f3a1f5e..62ce0e8 100644
--- a/drivers/staging/imx-drm/imx-hdmi.c
+++ b/drivers/staging/imx-drm/imx-hdmi.c
@@ -16,6 +16,7 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/hdmi.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
@@ -52,11 +53,6 @@
YCbCr422_12B = 0x12,
};
-enum hdmi_colorimetry {
- ITU601,
- ITU709,
-};
-
enum imx_hdmi_devtype {
IMX6Q_HDMI,
IMX6DL_HDMI,
@@ -489,12 +485,12 @@
if (is_color_space_conversion(hdmi)) {
if (hdmi->hdmi_data.enc_out_format == RGB) {
- if (hdmi->hdmi_data.colorimetry == ITU601)
+ if (hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_601)
csc_coeff = &csc_coeff_rgb_out_eitu601;
else
csc_coeff = &csc_coeff_rgb_out_eitu709;
} else if (hdmi->hdmi_data.enc_in_format == RGB) {
- if (hdmi->hdmi_data.colorimetry == ITU601)
+ if (hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_601)
csc_coeff = &csc_coeff_rgb_in_eitu601;
else
csc_coeff = &csc_coeff_rgb_in_eitu709;
@@ -1140,16 +1136,16 @@
/* Set up colorimetry */
if (hdmi->hdmi_data.enc_out_format == XVYCC444) {
colorimetry = HDMI_FC_AVICONF1_COLORIMETRY_EXTENDED_INFO;
- if (hdmi->hdmi_data.colorimetry == ITU601)
+ if (hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_601)
ext_colorimetry =
HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601;
- else /* hdmi->hdmi_data.colorimetry == ITU709 */
+ else /*hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_709*/
ext_colorimetry =
HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC709;
} else if (hdmi->hdmi_data.enc_out_format != RGB) {
- if (hdmi->hdmi_data.colorimetry == ITU601)
+ if (hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_601)
colorimetry = HDMI_FC_AVICONF1_COLORIMETRY_SMPTE;
- else /* hdmi->hdmi_data.colorimetry == ITU709 */
+ else /*hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_709*/
colorimetry = HDMI_FC_AVICONF1_COLORIMETRY_ITUR;
ext_colorimetry = HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601;
} else { /* Carries no data */
@@ -1379,9 +1375,9 @@
(hdmi->vic == 21) || (hdmi->vic == 22) ||
(hdmi->vic == 2) || (hdmi->vic == 3) ||
(hdmi->vic == 17) || (hdmi->vic == 18))
- hdmi->hdmi_data.colorimetry = ITU601;
+ hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_601;
else
- hdmi->hdmi_data.colorimetry = ITU709;
+ hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_709;
if ((hdmi->vic == 10) || (hdmi->vic == 11) ||
(hdmi->vic == 12) || (hdmi->vic == 13) ||
diff --git a/drivers/staging/lustre/TODO b/drivers/staging/lustre/TODO
index 22742d6..0a2b6cb 100644
--- a/drivers/staging/lustre/TODO
+++ b/drivers/staging/lustre/TODO
@@ -9,5 +9,6 @@
* Other minor misc cleanups...
Please send any patches to Greg Kroah-Hartman <greg@kroah.com>, Andreas Dilger
-<andreas.dilger@intel.com> and Peng Tao <tao.peng@emc.com>. CCing
-hpdd-discuss <hpdd-discuss@lists.01.org> would be great too.
+<andreas.dilger@intel.com>, Oleg Drokin <oleg.drokin@intel.com> and
+Peng Tao <tao.peng@emc.com>. CCing hpdd-discuss <hpdd-discuss@lists.01.org>
+would be great too.
diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_kernelcomm.h b/drivers/staging/lustre/include/linux/libcfs/libcfs_kernelcomm.h
index 596a15f..037ae8a 100644
--- a/drivers/staging/lustre/include/linux/libcfs/libcfs_kernelcomm.h
+++ b/drivers/staging/lustre/include/linux/libcfs/libcfs_kernelcomm.h
@@ -61,6 +61,8 @@
__u16 kuc_msglen; /* Including header */
} __attribute__((aligned(sizeof(__u64))));
+#define KUC_CHANGELOG_MSG_MAXSIZE (sizeof(struct kuc_hdr)+CR_MAXSIZE)
+
#define KUC_MAGIC 0x191C /*Lustre9etLinC */
#define KUC_FL_BLOCK 0x01 /* Wait for send */
diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h b/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h
index d0d942c..dddccca1 100644
--- a/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h
+++ b/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h
@@ -120,7 +120,7 @@
do { \
LASSERT(!in_interrupt() || \
((size) <= LIBCFS_VMALLOC_SIZE && \
- ((mask) & GFP_ATOMIC)) != 0); \
+ ((mask) & __GFP_WAIT) == 0)); \
} while (0)
#define LIBCFS_ALLOC_POST(ptr, size) \
diff --git a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
index 9364863..6f58ead 100644
--- a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
+++ b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c
@@ -529,7 +529,7 @@
{
struct page *page;
- if (is_vmalloc_addr(vaddr)) {
+ if (is_vmalloc_addr((void *)vaddr)) {
page = vmalloc_to_page ((void *)vaddr);
LASSERT (page != NULL);
return page;
diff --git a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c
index 68a4f52..b7b53b5 100644
--- a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c
+++ b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c
@@ -924,7 +924,7 @@
int
ksocknal_send(lnet_ni_t *ni, void *private, lnet_msg_t *lntmsg)
{
- int mpflag = 0;
+ int mpflag = 1;
int type = lntmsg->msg_type;
lnet_process_id_t target = lntmsg->msg_target;
unsigned int payload_niov = lntmsg->msg_niov;
@@ -993,8 +993,9 @@
/* The first fragment will be set later in pro_pack */
rc = ksocknal_launch_packet(ni, tx, target);
- if (lntmsg->msg_vmflush)
+ if (!mpflag)
cfs_memory_pressure_restore(mpflag);
+
if (rc == 0)
return (0);
diff --git a/drivers/staging/lustre/lustre/include/lustre/lustre_user.h b/drivers/staging/lustre/lustre/include/lustre/lustre_user.h
index 6b6c0240..7893d83 100644
--- a/drivers/staging/lustre/lustre/include/lustre/lustre_user.h
+++ b/drivers/staging/lustre/lustre/include/lustre/lustre_user.h
@@ -760,7 +760,8 @@
*flags |= (error << CLF_HSM_ERR_L);
}
-#define CR_MAXSIZE cfs_size_round(2*NAME_MAX + 1 + sizeof(struct changelog_rec))
+#define CR_MAXSIZE cfs_size_round(2*NAME_MAX + 1 + \
+ sizeof(struct changelog_ext_rec))
struct changelog_rec {
__u16 cr_namelen;
diff --git a/drivers/staging/lustre/lustre/llite/dir.c b/drivers/staging/lustre/lustre/llite/dir.c
index 22d0acc9..52b7731 100644
--- a/drivers/staging/lustre/lustre/llite/dir.c
+++ b/drivers/staging/lustre/lustre/llite/dir.c
@@ -1086,7 +1086,7 @@
break;
case Q_GETQUOTA:
if (((type == USRQUOTA &&
- uid_eq(current_euid(), make_kuid(&init_user_ns, id))) ||
+ !uid_eq(current_euid(), make_kuid(&init_user_ns, id))) ||
(type == GRPQUOTA &&
!in_egroup_p(make_kgid(&init_user_ns, id)))) &&
(!cfs_capable(CFS_CAP_SYS_ADMIN) ||
diff --git a/drivers/staging/lustre/lustre/mdc/mdc_request.c b/drivers/staging/lustre/lustre/mdc/mdc_request.c
index d1ad91c3..8301392 100644
--- a/drivers/staging/lustre/lustre/mdc/mdc_request.c
+++ b/drivers/staging/lustre/lustre/mdc/mdc_request.c
@@ -1430,7 +1430,7 @@
{
struct kuc_hdr *lh = (struct kuc_hdr *)buf;
- LASSERT(len <= CR_MAXSIZE);
+ LASSERT(len <= KUC_CHANGELOG_MSG_MAXSIZE);
lh->kuc_magic = KUC_MAGIC;
lh->kuc_transport = KUC_TRANSPORT_CHANGELOG;
@@ -1503,7 +1503,7 @@
CDEBUG(D_CHANGELOG, "changelog to fp=%p start "LPU64"\n",
cs->cs_fp, cs->cs_startrec);
- OBD_ALLOC(cs->cs_buf, CR_MAXSIZE);
+ OBD_ALLOC(cs->cs_buf, KUC_CHANGELOG_MSG_MAXSIZE);
if (cs->cs_buf == NULL)
GOTO(out, rc = -ENOMEM);
@@ -1540,7 +1540,7 @@
if (ctxt)
llog_ctxt_put(ctxt);
if (cs->cs_buf)
- OBD_FREE(cs->cs_buf, CR_MAXSIZE);
+ OBD_FREE(cs->cs_buf, KUC_CHANGELOG_MSG_MAXSIZE);
OBD_FREE_PTR(cs);
return rc;
}
diff --git a/drivers/staging/media/go7007/go7007-loader.c b/drivers/staging/media/go7007/go7007-loader.c
index 10bb41c..eecb1f2 100644
--- a/drivers/staging/media/go7007/go7007-loader.c
+++ b/drivers/staging/media/go7007/go7007-loader.c
@@ -59,7 +59,7 @@
if (usbdev->descriptor.bNumConfigurations != 1) {
dev_err(&interface->dev, "can't handle multiple config\n");
- return -ENODEV;
+ goto failed2;
}
vendor = le16_to_cpu(usbdev->descriptor.idVendor);
@@ -108,6 +108,7 @@
return 0;
failed2:
+ usb_put_dev(usbdev);
dev_err(&interface->dev, "probe failed\n");
return -ENODEV;
}
@@ -115,6 +116,7 @@
static void go7007_loader_disconnect(struct usb_interface *interface)
{
dev_info(&interface->dev, "disconnect\n");
+ usb_put_dev(interface_to_usbdev(interface));
usb_set_intfdata(interface, NULL);
}
diff --git a/drivers/staging/netlogic/xlr_net.c b/drivers/staging/netlogic/xlr_net.c
index eedffed..d8ea254 100644
--- a/drivers/staging/netlogic/xlr_net.c
+++ b/drivers/staging/netlogic/xlr_net.c
@@ -892,6 +892,11 @@
priv->mii_bus->write = xlr_mii_write;
priv->mii_bus->parent = &pdev->dev;
priv->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+ if (priv->mii_bus->irq == NULL) {
+ pr_err("irq alloc failed\n");
+ mdiobus_free(priv->mii_bus);
+ return -ENOMEM;
+ }
priv->mii_bus->irq[priv->phy_addr] = priv->ndev->irq;
/* Scan only the enabled address */
diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c
index 47e0a91..5a001d9 100644
--- a/drivers/staging/octeon-usb/octeon-hcd.c
+++ b/drivers/staging/octeon-usb/octeon-hcd.c
@@ -275,13 +275,6 @@
*/
#define MAX_TRANSFER_PACKETS ((1<<10)-1)
-enum {
- USB_CLOCK_TYPE_REF_12,
- USB_CLOCK_TYPE_REF_24,
- USB_CLOCK_TYPE_REF_48,
- USB_CLOCK_TYPE_CRYSTAL_12,
-};
-
/**
* Logical transactions may take numerous low level
* transactions, especially when splits are concerned. This
@@ -471,19 +464,6 @@
/* Returns the IO address to push/pop stuff data from the FIFOs */
#define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
-static int octeon_usb_get_clock_type(void)
-{
- switch (cvmx_sysinfo_get()->board_type) {
- case CVMX_BOARD_TYPE_BBGW_REF:
- case CVMX_BOARD_TYPE_LANAI2_A:
- case CVMX_BOARD_TYPE_LANAI2_U:
- case CVMX_BOARD_TYPE_LANAI2_G:
- case CVMX_BOARD_TYPE_UBNT_E100:
- return USB_CLOCK_TYPE_CRYSTAL_12;
- }
- return USB_CLOCK_TYPE_REF_48;
-}
-
/**
* Read a USB 32bit CSR. It performs the necessary address swizzle
* for 32bit CSRs and logs the value in a readable format if
@@ -582,37 +562,6 @@
return 0; /* Data0 */
}
-
-/**
- * Return the number of USB ports supported by this Octeon
- * chip. If the chip doesn't support USB, or is not supported
- * by this API, a zero will be returned. Most Octeon chips
- * support one usb port, but some support two ports.
- * cvmx_usb_initialize() must be called on independent
- * struct cvmx_usb_state.
- *
- * Returns: Number of port, zero if usb isn't supported
- */
-static int cvmx_usb_get_num_ports(void)
-{
- int arch_ports = 0;
-
- if (OCTEON_IS_MODEL(OCTEON_CN56XX))
- arch_ports = 1;
- else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
- arch_ports = 2;
- else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
- arch_ports = 1;
- else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
- arch_ports = 1;
- else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
- arch_ports = 1;
- else
- arch_ports = 0;
-
- return arch_ports;
-}
-
/**
* Initialize a USB port for use. This must be called before any
* other access to the Octeon USB port is made. The port starts
@@ -628,41 +577,16 @@
* Returns: 0 or a negative error code.
*/
static int cvmx_usb_initialize(struct cvmx_usb_state *usb,
- int usb_port_number)
+ int usb_port_number,
+ enum cvmx_usb_initialize_flags flags)
{
union cvmx_usbnx_clk_ctl usbn_clk_ctl;
union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
- enum cvmx_usb_initialize_flags flags = 0;
int i;
/* At first allow 0-1 for the usb port number */
if ((usb_port_number < 0) || (usb_port_number > 1))
return -EINVAL;
- /* For all chips except 52XX there is only one port */
- if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
- return -EINVAL;
- /* Try to determine clock type automatically */
- if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12) {
- /* Only 12 MHZ crystals are supported */
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
- } else {
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
-
- switch (octeon_usb_get_clock_type()) {
- case USB_CLOCK_TYPE_REF_12:
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
- break;
- case USB_CLOCK_TYPE_REF_24:
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
- break;
- case USB_CLOCK_TYPE_REF_48:
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
- break;
- default:
- return -EINVAL;
- break;
- }
- }
memset(usb, 0, sizeof(*usb));
usb->init_flags = flags;
@@ -3431,7 +3355,6 @@
return 0;
}
-
static const struct hc_driver octeon_hc_driver = {
.description = "Octeon USB",
.product_desc = "Octeon Host Controller",
@@ -3448,15 +3371,74 @@
.hub_control = octeon_usb_hub_control,
};
-
-static int octeon_usb_driver_probe(struct device *dev)
+static int octeon_usb_probe(struct platform_device *pdev)
{
int status;
- int usb_num = to_platform_device(dev)->id;
- int irq = platform_get_irq(to_platform_device(dev), 0);
+ int initialize_flags;
+ int usb_num;
+ struct resource *res_mem;
+ struct device_node *usbn_node;
+ int irq = platform_get_irq(pdev, 0);
+ struct device *dev = &pdev->dev;
struct octeon_hcd *priv;
struct usb_hcd *hcd;
unsigned long flags;
+ u32 clock_rate = 48000000;
+ bool is_crystal_clock = false;
+ const char *clock_type;
+ int i;
+
+ if (dev->of_node == NULL) {
+ dev_err(dev, "Error: empty of_node\n");
+ return -ENXIO;
+ }
+ usbn_node = dev->of_node->parent;
+
+ i = of_property_read_u32(usbn_node,
+ "refclk-frequency", &clock_rate);
+ if (i) {
+ dev_err(dev, "No USBN \"refclk-frequency\"\n");
+ return -ENXIO;
+ }
+ switch (clock_rate) {
+ case 12000000:
+ initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
+ break;
+ case 24000000:
+ initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
+ break;
+ case 48000000:
+ initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
+ break;
+ default:
+ dev_err(dev, "Illebal USBN \"refclk-frequency\" %u\n", clock_rate);
+ return -ENXIO;
+
+ }
+
+ i = of_property_read_string(usbn_node,
+ "refclk-type", &clock_type);
+
+ if (!i && strcmp("crystal", clock_type) == 0)
+ is_crystal_clock = true;
+
+ if (is_crystal_clock)
+ initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
+ else
+ initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res_mem == NULL) {
+ dev_err(dev, "found no memory resource\n");
+ return -ENXIO;
+ }
+ usb_num = (res_mem->start >> 44) & 1;
+
+ if (irq < 0) {
+ /* Defective device tree, but we know how to fix it. */
+ irq_hw_number_t hwirq = usb_num ? (1 << 6) + 17 : 56;
+ irq = irq_create_mapping(NULL, hwirq);
+ }
/*
* Set the DMA mask to 64bits so we get buffers already translated for
@@ -3465,90 +3447,6 @@
dev->coherent_dma_mask = ~0;
dev->dma_mask = &dev->coherent_dma_mask;
- hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
- if (!hcd) {
- dev_dbg(dev, "Failed to allocate memory for HCD\n");
- return -1;
- }
- hcd->uses_new_polling = 1;
- priv = (struct octeon_hcd *)hcd->hcd_priv;
-
- spin_lock_init(&priv->lock);
-
- tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
- INIT_LIST_HEAD(&priv->dequeue_list);
-
- status = cvmx_usb_initialize(&priv->usb, usb_num);
- if (status) {
- dev_dbg(dev, "USB initialization failed with %d\n", status);
- kfree(hcd);
- return -1;
- }
-
- /* This delay is needed for CN3010, but I don't know why... */
- mdelay(10);
-
- spin_lock_irqsave(&priv->lock, flags);
- cvmx_usb_poll(&priv->usb);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- status = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (status) {
- dev_dbg(dev, "USB add HCD failed with %d\n", status);
- kfree(hcd);
- return -1;
- }
- device_wakeup_enable(hcd->self.controller);
-
- dev_dbg(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
-
- return 0;
-}
-
-static int octeon_usb_driver_remove(struct device *dev)
-{
- int status;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
- struct octeon_hcd *priv = hcd_to_octeon(hcd);
- unsigned long flags;
-
- usb_remove_hcd(hcd);
- tasklet_kill(&priv->dequeue_tasklet);
- spin_lock_irqsave(&priv->lock, flags);
- status = cvmx_usb_shutdown(&priv->usb);
- spin_unlock_irqrestore(&priv->lock, flags);
- if (status)
- dev_dbg(dev, "USB shutdown failed with %d\n", status);
-
- kfree(hcd);
-
- return 0;
-}
-
-static struct device_driver octeon_usb_driver = {
- .name = "OcteonUSB",
- .bus = &platform_bus_type,
- .probe = octeon_usb_driver_probe,
- .remove = octeon_usb_driver_remove,
-};
-
-
-#define MAX_USB_PORTS 10
-static struct platform_device *pdev_glob[MAX_USB_PORTS];
-static int octeon_usb_registered;
-static int __init octeon_usb_module_init(void)
-{
- int num_devices = cvmx_usb_get_num_ports();
- int device;
-
- if (usb_disabled() || num_devices == 0)
- return -ENODEV;
-
- if (driver_register(&octeon_usb_driver))
- return -ENOMEM;
-
- octeon_usb_registered = 1;
-
/*
* Only cn52XX and cn56XX have DWC_OTG USB hardware and the
* IOB priority registers. Under heavy network load USB
@@ -3569,41 +3467,102 @@
cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
}
- for (device = 0; device < num_devices; device++) {
- struct resource irq_resource;
- struct platform_device *pdev;
- memset(&irq_resource, 0, sizeof(irq_resource));
- irq_resource.start = (device == 0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
- irq_resource.end = irq_resource.start;
- irq_resource.flags = IORESOURCE_IRQ;
- pdev = platform_device_register_simple((char *)octeon_usb_driver. name, device, &irq_resource, 1);
- if (IS_ERR(pdev)) {
- driver_unregister(&octeon_usb_driver);
- octeon_usb_registered = 0;
- return PTR_ERR(pdev);
- }
- if (device < MAX_USB_PORTS)
- pdev_glob[device] = pdev;
-
+ hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
+ if (!hcd) {
+ dev_dbg(dev, "Failed to allocate memory for HCD\n");
+ return -1;
}
+ hcd->uses_new_polling = 1;
+ priv = (struct octeon_hcd *)hcd->hcd_priv;
+
+ spin_lock_init(&priv->lock);
+
+ tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
+ INIT_LIST_HEAD(&priv->dequeue_list);
+
+ status = cvmx_usb_initialize(&priv->usb, usb_num, initialize_flags);
+ if (status) {
+ dev_dbg(dev, "USB initialization failed with %d\n", status);
+ kfree(hcd);
+ return -1;
+ }
+
+ /* This delay is needed for CN3010, but I don't know why... */
+ mdelay(10);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_poll(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ status = usb_add_hcd(hcd, irq, 0);
+ if (status) {
+ dev_dbg(dev, "USB add HCD failed with %d\n", status);
+ kfree(hcd);
+ return -1;
+ }
+ device_wakeup_enable(hcd->self.controller);
+
+ dev_info(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
+
return 0;
}
-static void __exit octeon_usb_module_cleanup(void)
+static int octeon_usb_remove(struct platform_device *pdev)
{
- int i;
+ int status;
+ struct device *dev = &pdev->dev;
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
- for (i = 0; i < MAX_USB_PORTS; i++)
- if (pdev_glob[i]) {
- platform_device_unregister(pdev_glob[i]);
- pdev_glob[i] = NULL;
- }
- if (octeon_usb_registered)
- driver_unregister(&octeon_usb_driver);
+ usb_remove_hcd(hcd);
+ tasklet_kill(&priv->dequeue_tasklet);
+ spin_lock_irqsave(&priv->lock, flags);
+ status = cvmx_usb_shutdown(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ if (status)
+ dev_dbg(dev, "USB shutdown failed with %d\n", status);
+
+ kfree(hcd);
+
+ return 0;
}
+static struct of_device_id octeon_usb_match[] = {
+ {
+ .compatible = "cavium,octeon-5750-usbc",
+ },
+ {},
+};
+
+static struct platform_driver octeon_usb_driver = {
+ .driver = {
+ .name = "OcteonUSB",
+ .owner = THIS_MODULE,
+ .of_match_table = octeon_usb_match,
+ },
+ .probe = octeon_usb_probe,
+ .remove = octeon_usb_remove,
+};
+
+static int __init octeon_usb_driver_init(void)
+{
+ if (usb_disabled())
+ return 0;
+
+ return platform_driver_register(&octeon_usb_driver);
+}
+module_init(octeon_usb_driver_init);
+
+static void __exit octeon_usb_driver_exit(void)
+{
+ if (usb_disabled())
+ return;
+
+ platform_driver_unregister(&octeon_usb_driver);
+}
+module_exit(octeon_usb_driver_exit);
+
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
-MODULE_DESCRIPTION("Cavium Networks Octeon USB Host driver.");
-module_init(octeon_usb_module_init);
-module_exit(octeon_usb_module_cleanup);
+MODULE_AUTHOR("Cavium, Inc. <support@cavium.com>");
+MODULE_DESCRIPTION("Cavium Inc. OCTEON USB Host driver.");
diff --git a/drivers/staging/ozwpan/ozproto.c b/drivers/staging/ozwpan/ozproto.c
index cb06036..5d965cf 100644
--- a/drivers/staging/ozwpan/ozproto.c
+++ b/drivers/staging/ozwpan/ozproto.c
@@ -668,8 +668,8 @@
if (binding) {
binding->ptype.type = __constant_htons(OZ_ETHERTYPE);
binding->ptype.func = oz_pkt_recv;
- memcpy(binding->name, net_dev, OZ_MAX_BINDING_LEN);
if (net_dev && *net_dev) {
+ memcpy(binding->name, net_dev, OZ_MAX_BINDING_LEN);
oz_dbg(ON, "Adding binding: %s\n", net_dev);
binding->ptype.dev =
dev_get_by_name(&init_net, net_dev);
@@ -680,6 +680,7 @@
}
} else {
oz_dbg(ON, "Binding to all netcards\n");
+ memset(binding->name, 0, OZ_MAX_BINDING_LEN);
binding->ptype.dev = NULL;
}
if (binding) {
diff --git a/drivers/staging/rtl8188eu/core/rtw_wlan_util.c b/drivers/staging/rtl8188eu/core/rtw_wlan_util.c
index 153ec61..96df62f 100644
--- a/drivers/staging/rtl8188eu/core/rtw_wlan_util.c
+++ b/drivers/staging/rtl8188eu/core/rtw_wlan_util.c
@@ -912,12 +912,12 @@
unsigned char *pbuf;
u32 wpa_ielen = 0;
u8 *pbssid = GetAddr3Ptr(pframe);
- u32 hidden_ssid = 0;
struct HT_info_element *pht_info = NULL;
struct rtw_ieee80211_ht_cap *pht_cap = NULL;
u32 bcn_channel;
unsigned short ht_cap_info;
unsigned char ht_info_infos_0;
+ int ssid_len;
if (is_client_associated_to_ap(Adapter) == false)
return true;
@@ -999,21 +999,15 @@
}
/* checking SSID */
+ ssid_len = 0;
p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _SSID_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_);
- if (p == NULL) {
- DBG_88E("%s marc: cannot find SSID for survey event\n", __func__);
- hidden_ssid = true;
- } else {
- hidden_ssid = false;
+ if (p) {
+ ssid_len = *(p + 1);
+ if (ssid_len > NDIS_802_11_LENGTH_SSID)
+ ssid_len = 0;
}
-
- if ((NULL != p) && (false == hidden_ssid && (*(p + 1)))) {
- memcpy(bssid->Ssid.Ssid, (p + 2), *(p + 1));
- bssid->Ssid.SsidLength = *(p + 1);
- } else {
- bssid->Ssid.SsidLength = 0;
- bssid->Ssid.Ssid[0] = '\0';
- }
+ memcpy(bssid->Ssid.Ssid, (p + 2), ssid_len);
+ bssid->Ssid.SsidLength = ssid_len;
RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("%s bssid.Ssid.Ssid:%s bssid.Ssid.SsidLength:%d "
"cur_network->network.Ssid.Ssid:%s len:%d\n", __func__, bssid->Ssid.Ssid,
diff --git a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
index dec9925..4ad80ae 100644
--- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
@@ -2500,7 +2500,7 @@
("rtw_mp_ioctl_hdl: subcode [%d], len[%d], buffer_len[%d]\r\n",
poidparam->subcode, poidparam->len, len));
- if (poidparam->subcode >= MAX_MP_IOCTL_SUBCODE) {
+ if (poidparam->subcode >= ARRAY_SIZE(mp_ioctl_hdl)) {
RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_err_, ("no matching drvext subcodes\r\n"));
ret = -EINVAL;
goto _rtw_mp_ioctl_hdl_exit;
@@ -3164,9 +3164,7 @@
u8 *p2pie;
uint p2pielen = 0, attr_contentlen = 0;
u8 attr_content[100] = {0x00};
-
- u8 go_devadd_str[17 + 10] = {0x00};
- /* +10 is for the str "go_devadd =", we have to clear it at wrqu->data.pointer */
+ u8 go_devadd_str[17 + 12] = {};
/* Commented by Albert 20121209 */
/* The input data is the GO's interface address which the application wants to know its device address. */
@@ -3223,12 +3221,12 @@
spin_unlock_bh(&pmlmepriv->scanned_queue.lock);
if (!blnMatch)
- sprintf(go_devadd_str, "\n\ndev_add = NULL");
+ snprintf(go_devadd_str, sizeof(go_devadd_str), "\n\ndev_add = NULL");
else
- sprintf(go_devadd_str, "\n\ndev_add =%.2X:%.2X:%.2X:%.2X:%.2X:%.2X",
+ snprintf(go_devadd_str, sizeof(go_devadd_str), "\n\ndev_add =%.2X:%.2X:%.2X:%.2X:%.2X:%.2X",
attr_content[0], attr_content[1], attr_content[2], attr_content[3], attr_content[4], attr_content[5]);
- if (copy_to_user(wrqu->data.pointer, go_devadd_str, 10 + 17))
+ if (copy_to_user(wrqu->data.pointer, go_devadd_str, sizeof(go_devadd_str)))
return -EFAULT;
return ret;
}
diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
index 0a341d6..a70dcef 100644
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -53,7 +53,7 @@
{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0179)}, /* 8188ETV */
/*=== Customer ID ===*/
/****** 8188EUS ********/
- {USB_DEVICE(0x8179, 0x07B8)}, /* Abocom - Abocom */
+ {USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
{} /* Terminating entry */
};
diff --git a/drivers/staging/rtl8821ae/Kconfig b/drivers/staging/rtl8821ae/Kconfig
index 2aa5dac2..abccc9d 100644
--- a/drivers/staging/rtl8821ae/Kconfig
+++ b/drivers/staging/rtl8821ae/Kconfig
@@ -1,6 +1,6 @@
config R8821AE
tristate "RealTek RTL8821AE Wireless LAN NIC driver"
- depends on PCI && WLAN
+ depends on PCI && WLAN && MAC80211
depends on m
select WIRELESS_EXT
select WEXT_PRIV
diff --git a/drivers/staging/rtl8821ae/wifi.h b/drivers/staging/rtl8821ae/wifi.h
index cfe88a1..76bef93 100644
--- a/drivers/staging/rtl8821ae/wifi.h
+++ b/drivers/staging/rtl8821ae/wifi.h
@@ -1414,7 +1414,7 @@
/*88e tx power tracking*/
- u8 bb_swing_idx_ofdm[2];
+ u8 bb_swing_idx_ofdm[MAX_RF_PATH];
u8 bb_swing_idx_ofdm_current;
u8 bb_swing_idx_ofdm_base[MAX_RF_PATH];
bool bb_swing_flag_Ofdm;
diff --git a/drivers/staging/usbip/userspace/libsrc/names.c b/drivers/staging/usbip/userspace/libsrc/names.c
index 3c8d28b..81ff852 100644
--- a/drivers/staging/usbip/userspace/libsrc/names.c
+++ b/drivers/staging/usbip/userspace/libsrc/names.c
@@ -169,15 +169,15 @@
struct pool *p;
p = calloc(1, sizeof(struct pool));
- if (!p) {
+ if (!p)
+ return NULL;
+
+ p->mem = calloc(1, size);
+ if (!p->mem) {
free(p);
return NULL;
}
- p->mem = calloc(1, size);
- if (!p->mem)
- return NULL;
-
p->next = pool_head;
pool_head = p;
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c
index 9b51586..0141bc3 100644
--- a/drivers/staging/usbip/vhci_sysfs.c
+++ b/drivers/staging/usbip/vhci_sysfs.c
@@ -149,7 +149,8 @@
case USB_SPEED_WIRELESS:
break;
default:
- pr_err("speed %d\n", speed);
+ pr_err("Failed attach request for unsupported USB speed: %s\n",
+ usb_speed_string(speed));
return -EINVAL;
}
diff --git a/drivers/staging/wlags49_h2/wl_wext.c b/drivers/staging/wlags49_h2/wl_wext.c
index 4a1ddaf..187fc06 100644
--- a/drivers/staging/wlags49_h2/wl_wext.c
+++ b/drivers/staging/wlags49_h2/wl_wext.c
@@ -1061,7 +1061,7 @@
goto out;
}
- if (data->flags != 0 && data->length > HCF_MAX_NAME_LEN + 1) {
+ if (data->flags != 0 && data->length > HCF_MAX_NAME_LEN) {
ret = -EINVAL;
goto out;
}
diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c
index e048d64..cda4d80 100644
--- a/drivers/target/iscsi/iscsi_target_erl1.c
+++ b/drivers/target/iscsi/iscsi_target_erl1.c
@@ -507,7 +507,9 @@
u32 last_statsn;
int found_cmd;
- if (conn->exp_statsn > begrun) {
+ if (!begrun) {
+ begrun = conn->exp_statsn;
+ } else if (conn->exp_statsn > begrun) {
pr_err("Got Status SNACK Begrun: 0x%08x, RunLength:"
" 0x%08x but already got ExpStatSN: 0x%08x on CID:"
" %hu.\n", begrun, runlength, conn->exp_statsn,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 12da9b38..c3d9df6 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -500,7 +500,7 @@
if (segment_mult) {
u64 tmp = lba;
- start_lba = sector_div(tmp, segment_size * segment_mult);
+ start_lba = do_div(tmp, segment_size * segment_mult);
last_lba = first_lba + segment_size - 1;
if (start_lba >= first_lba &&
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 2f5d779..3013287 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -2009,7 +2009,7 @@
struct t10_reservation *pr_tmpl = &dev->t10_pr;
unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL;
sense_reason_t ret = TCM_NO_SENSE;
- int pr_holder = 0;
+ int pr_holder = 0, type;
if (!se_sess || !se_lun) {
pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n");
@@ -2131,6 +2131,7 @@
ret = TCM_RESERVATION_CONFLICT;
goto out;
}
+ type = pr_reg->pr_res_type;
spin_lock(&pr_tmpl->registration_lock);
/*
@@ -2161,6 +2162,7 @@
* Release the calling I_T Nexus registration now..
*/
__core_scsi3_free_registration(cmd->se_dev, pr_reg, NULL, 1);
+ pr_reg = NULL;
/*
* From spc4r17, section 5.7.11.3 Unregistering
@@ -2174,8 +2176,8 @@
* RESERVATIONS RELEASED.
*/
if (pr_holder &&
- (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY ||
- pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY)) {
+ (type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY ||
+ type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY)) {
list_for_each_entry(pr_reg_p,
&pr_tmpl->registration_list,
pr_reg_list) {
@@ -2194,7 +2196,8 @@
ret = core_scsi3_update_and_write_aptpl(dev, aptpl);
out:
- core_scsi3_put_pr_reg(pr_reg);
+ if (pr_reg)
+ core_scsi3_put_pr_reg(pr_reg);
return ret;
}
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index fa3cae3..a448944 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -1074,12 +1074,19 @@
struct scatterlist *psg;
void *paddr, *addr;
unsigned int i, len, left;
+ unsigned int offset = 0;
left = sectors * dev->prot_length;
for_each_sg(cmd->t_prot_sg, psg, cmd->t_prot_nents, i) {
len = min(psg->length, left);
+ if (offset >= sg->length) {
+ sg = sg_next(sg);
+ offset = 0;
+ sg_off = sg->offset;
+ }
+
paddr = kmap_atomic(sg_page(psg)) + psg->offset;
addr = kmap_atomic(sg_page(sg)) + sg_off;
@@ -1089,6 +1096,7 @@
memcpy(addr, paddr, len);
left -= len;
+ offset += len;
kunmap_atomic(paddr);
kunmap_atomic(addr);
}
diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index 43c5ca98..3bebc71 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -440,8 +440,8 @@
padding = ((-scsi_target_len) & 3);
if (padding)
scsi_target_len += padding;
- if (scsi_name_len > 256)
- scsi_name_len = 256;
+ if (scsi_target_len > 256)
+ scsi_target_len = 256;
buf[off-1] = scsi_target_len;
off += scsi_target_len;
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index c50fd9f..24b4f65d 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -669,9 +669,6 @@
return;
}
- if (!success)
- cmd->transport_state |= CMD_T_FAILED;
-
/*
* Check for case where an explicit ABORT_TASK has been received
* and transport_wait_for_tasks() will be waiting for completion..
@@ -681,7 +678,7 @@
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
complete(&cmd->t_transport_stop_comp);
return;
- } else if (cmd->transport_state & CMD_T_FAILED) {
+ } else if (!success) {
INIT_WORK(&cmd->work, target_complete_failure_work);
} else {
INIT_WORK(&cmd->work, target_complete_ok_work);
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 6496872..b01659b 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -255,13 +255,7 @@
/* Register as a vio device to receive callbacks */
return platform_driver_register(&hvc_opal_driver);
}
-module_init(hvc_opal_init);
-
-static void __exit hvc_opal_exit(void)
-{
- platform_driver_unregister(&hvc_opal_driver);
-}
-module_exit(hvc_opal_exit);
+device_initcall(hvc_opal_init);
static void udbg_opal_putc(char c)
{
diff --git a/drivers/tty/hvc/hvc_rtas.c b/drivers/tty/hvc/hvc_rtas.c
index 0069bb8..08c8792 100644
--- a/drivers/tty/hvc/hvc_rtas.c
+++ b/drivers/tty/hvc/hvc_rtas.c
@@ -102,17 +102,7 @@
return 0;
}
-module_init(hvc_rtas_init);
-
-/* This will tear down the tty portion of the driver */
-static void __exit hvc_rtas_exit(void)
-{
- /* Really the fun isn't over until the worker thread breaks down and
- * the tty cleans up */
- if (hvc_rtas_dev)
- hvc_remove(hvc_rtas_dev);
-}
-module_exit(hvc_rtas_exit);
+device_initcall(hvc_rtas_init);
/* This will happen prior to module init. There is no tty at this time? */
static int __init hvc_rtas_console_init(void)
diff --git a/drivers/tty/hvc/hvc_udbg.c b/drivers/tty/hvc/hvc_udbg.c
index 7222827..9cf573d 100644
--- a/drivers/tty/hvc/hvc_udbg.c
+++ b/drivers/tty/hvc/hvc_udbg.c
@@ -80,14 +80,7 @@
return 0;
}
-module_init(hvc_udbg_init);
-
-static void __exit hvc_udbg_exit(void)
-{
- if (hvc_udbg_dev)
- hvc_remove(hvc_udbg_dev);
-}
-module_exit(hvc_udbg_exit);
+device_initcall(hvc_udbg_init);
static int __init hvc_udbg_console_init(void)
{
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 636c9ba..2dc2831 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -561,18 +561,7 @@
#endif
return r;
}
-
-static void __exit xen_hvc_fini(void)
-{
- struct xencons_info *entry, *next;
-
- if (list_empty(&xenconsoles))
- return;
-
- list_for_each_entry_safe(entry, next, &xenconsoles, list) {
- xen_console_remove(entry);
- }
-}
+device_initcall(xen_hvc_init);
static int xen_cons_init(void)
{
@@ -598,10 +587,6 @@
hvc_instantiate(HVC_COOKIE, 0, ops);
return 0;
}
-
-
-module_init(xen_hvc_init);
-module_exit(xen_hvc_fini);
console_initcall(xen_cons_init);
#ifdef CONFIG_EARLY_PRINTK
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index f34461c..2ebe47b 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1090,6 +1090,7 @@
{
unsigned int addr = 0;
unsigned int modem = 0;
+ unsigned int brk = 0;
struct gsm_dlci *dlci;
int len = clen;
u8 *dp = data;
@@ -1116,6 +1117,16 @@
if (len == 0)
return;
}
+ len--;
+ if (len > 0) {
+ while (gsm_read_ea(&brk, *dp++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ modem <<= 7;
+ modem |= (brk & 0x7f);
+ }
tty = tty_port_tty_get(&dlci->port);
gsm_process_modem(tty, dlci, modem, clen);
if (tty) {
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index cb8017a..d15624c 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -817,8 +817,7 @@
struct n_tty_data *ldata = tty->disc_data;
size_t echoed;
- if ((!L_ECHO(tty) && !L_ECHONL(tty)) ||
- ldata->echo_mark == ldata->echo_tail)
+ if (ldata->echo_mark == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
@@ -1244,7 +1243,8 @@
if (L_ECHO(tty)) {
echo_char(c, tty);
commit_echoes(tty);
- }
+ } else
+ process_echoes(tty);
isig(signal, tty);
return;
}
@@ -1274,7 +1274,7 @@
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
start_tty(tty);
- commit_echoes(tty);
+ process_echoes(tty);
return 0;
}
if (c == STOP_CHAR(tty)) {
@@ -1820,8 +1820,10 @@
* Fix tty hang when I_IXON(tty) is cleared, but the tty
* been stopped by STOP_CHAR(tty) before it.
*/
- if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped)
+ if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) {
start_tty(tty);
+ process_echoes(tty);
+ }
/* The termios change make the tty ready for I/O */
if (waitqueue_active(&tty->write_wait))
@@ -1896,7 +1898,7 @@
static inline int input_available_p(struct tty_struct *tty, int poll)
{
struct n_tty_data *ldata = tty->disc_data;
- int amt = poll && !TIME_CHAR(tty) ? MIN_CHAR(tty) : 1;
+ int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1;
if (ldata->icanon && !L_EXTPROC(tty)) {
if (ldata->canon_head != ldata->read_tail)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 61ecd70..69932b7 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2433,6 +2433,24 @@
serial_dl_write(up, quot);
/*
+ * XR17V35x UARTs have an extra fractional divisor register (DLD)
+ *
+ * We need to recalculate all of the registers, because DLM and DLL
+ * are already rounded to a whole integer.
+ *
+ * When recalculating we use a 32x clock instead of a 16x clock to
+ * allow 1-bit for rounding in the fractional part.
+ */
+ if (up->port.type == PORT_XR17V35X) {
+ unsigned int baud_x32 = (port->uartclk * 2) / baud;
+ u16 quot = baud_x32 / 32;
+ u8 quot_frac = DIV_ROUND_CLOSEST(baud_x32 % 32, 2);
+
+ serial_dl_write(up, quot);
+ serial_port_out(port, 0x2, quot_frac & 0xf);
+ }
+
+ /*
* LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
* is written without DLAB set, this mode will be disabled.
*/
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index faa64e6..ed31135 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -391,7 +391,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int dw8250_suspend(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
@@ -409,7 +409,7 @@
return 0;
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_PM_RUNTIME
static int dw8250_runtime_suspend(struct device *dev)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 50228ee..0ff3e36 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -783,7 +783,8 @@
{
unsigned int bar;
- if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
+ if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) &&
+ (priv->dev->subsystem_device & 0xff00) == 0x3000) {
/* netmos apparently orders BARs by datasheet layout, so serial
* ports get BARs 0 and 3 (or 1 and 4 for memmapped)
*/
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a49f10d..91c0d88 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -35,21 +35,18 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/dma-mapping.h>
#include <linux/atmel_pdc.h>
#include <linux/atmel_serial.h>
#include <linux/uaccess.h>
#include <linux/platform_data/atmel.h>
#include <linux/timer.h>
+#include <linux/gpio.h>
#include <asm/io.h>
#include <asm/ioctls.h>
-#ifdef CONFIG_ARM
-#include <mach/cpu.h>
-#include <asm/gpio.h>
-#endif
-
#define PDC_BUFFER_SIZE 512
/* Revisit: We should calculate this based on the actual port settings */
#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
@@ -168,6 +165,7 @@
struct circ_buf rx_ring;
struct serial_rs485 rs485; /* rs485 settings */
+ int rts_gpio; /* optional RTS GPIO */
unsigned int tx_done_mask;
bool is_usart; /* usart or uart */
struct timer_list uart_timer; /* uart timer */
@@ -301,20 +299,16 @@
unsigned int mode;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-#ifdef CONFIG_ARCH_AT91RM9200
- if (cpu_is_at91rm9200()) {
- /*
- * AT91RM9200 Errata #39: RTS0 is not internally connected
- * to PA21. We need to drive the pin manually.
- */
- if (port->mapbase == AT91RM9200_BASE_US0) {
- if (mctrl & TIOCM_RTS)
- at91_set_gpio_value(AT91_PIN_PA21, 0);
- else
- at91_set_gpio_value(AT91_PIN_PA21, 1);
- }
+ /*
+ * AT91RM9200 Errata #39: RTS0 is not internally connected
+ * to PA21. We need to drive the pin as a GPIO.
+ */
+ if (gpio_is_valid(atmel_port->rts_gpio)) {
+ if (mctrl & TIOCM_RTS)
+ gpio_set_value(atmel_port->rts_gpio, 0);
+ else
+ gpio_set_value(atmel_port->rts_gpio, 1);
}
-#endif
if (mctrl & TIOCM_RTS)
control |= ATMEL_US_RTSEN;
@@ -2389,6 +2383,25 @@
port = &atmel_ports[ret];
port->backup_imr = 0;
port->uart.line = ret;
+ port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */
+ if (pdata)
+ port->rts_gpio = pdata->rts_gpio;
+ else if (np)
+ port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0);
+
+ if (gpio_is_valid(port->rts_gpio)) {
+ ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS");
+ if (ret) {
+ dev_err(&pdev->dev, "error requesting RTS GPIO\n");
+ goto err;
+ }
+ /* Default to 1 as RTS is active low */
+ ret = gpio_direction_output(port->rts_gpio, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "error setting up RTS GPIO\n");
+ goto err;
+ }
+ }
ret = atmel_init_port(port, pdev);
if (ret)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index fa511eb..77f0351 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -738,9 +738,6 @@
return retval;
}
disable_irq(up->wakeirq);
- } else {
- dev_info(up->port.dev, "no wakeirq for uart%d\n",
- up->port.line);
}
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
@@ -1604,8 +1601,11 @@
flags & SER_RS485_RTS_AFTER_SEND);
if (ret < 0)
return ret;
- } else
+ } else if (up->rts_gpio == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else {
up->rts_gpio = -EINVAL;
+ }
if (of_property_read_u32_array(np, "rs485-rts-delay",
rs485_delay, 2) == 0) {
@@ -1687,6 +1687,9 @@
up->port.iotype = UPIO_MEM;
up->port.irq = uartirq;
up->wakeirq = wakeirq;
+ if (!up->wakeirq)
+ dev_info(up->port.dev, "no wakeirq for uart%d\n",
+ up->port.line);
up->port.regshift = 2;
up->port.fifosize = 64;
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 49a2ffd..b7bfe24 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -542,8 +542,10 @@
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
SIRFUART_IO_MODE);
- sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
spin_unlock_irqrestore(&sirfport->rx_lock, flags);
+ spin_lock(&port->lock);
+ sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
+ spin_unlock(&port->lock);
if (sirfport->rx_io_count == 4) {
spin_lock_irqsave(&sirfport->rx_lock, flags);
sirfport->rx_io_count = 0;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index c74a00a..bd2715a 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1267,16 +1267,17 @@
* @p: output buffer of at least 7 bytes
*
* Generate a name from a driver reference and write it to the output
- * buffer.
+ * buffer. Return the number of bytes written.
*
* Locking: None
*/
-static void tty_line_name(struct tty_driver *driver, int index, char *p)
+static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
{
if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
- strcpy(p, driver->name);
+ return sprintf(p, "%s", driver->name);
else
- sprintf(p, "%s%d", driver->name, index + driver->name_base);
+ return sprintf(p, "%s%d", driver->name,
+ index + driver->name_base);
}
/**
@@ -3545,9 +3546,19 @@
if (i >= ARRAY_SIZE(cs))
break;
}
- while (i--)
- count += sprintf(buf + count, "%s%d%c",
- cs[i]->name, cs[i]->index, i ? ' ':'\n');
+ while (i--) {
+ struct tty_driver *driver;
+ const char *name = cs[i]->name;
+ int index = cs[i]->index;
+
+ driver = cs[i]->device(cs[i], &index);
+ if (driver) {
+ count += tty_line_name(driver, index, buf + count);
+ count += sprintf(buf + count, "%c", i ? ' ':'\n');
+ } else
+ count += sprintf(buf + count, "%s%d%c",
+ name, index, i ? ' ':'\n');
+ }
console_unlock();
return count;
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 61b1137..23b5d32 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1164,6 +1164,8 @@
scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char,
vc->vc_screenbuf_size >> 1);
set_origin(vc);
+ if (CON_IS_VISIBLE(vc))
+ update_screen(vc);
/* fall through */
case 2: /* erase whole display */
count = vc->vc_cols * vc->vc_rows;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 5d01558..ab90a01 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -63,8 +63,10 @@
dynid->id.idProduct = idProduct;
dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
if (fields > 2 && bInterfaceClass) {
- if (bInterfaceClass > 255)
- return -EINVAL;
+ if (bInterfaceClass > 255) {
+ retval = -EINVAL;
+ goto fail;
+ }
dynid->id.bInterfaceClass = (u8)bInterfaceClass;
dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
@@ -73,17 +75,21 @@
if (fields > 4) {
const struct usb_device_id *id = id_table;
- if (!id)
- return -ENODEV;
+ if (!id) {
+ retval = -ENODEV;
+ goto fail;
+ }
for (; id->match_flags; id++)
if (id->idVendor == refVendor && id->idProduct == refProduct)
break;
- if (id->match_flags)
+ if (id->match_flags) {
dynid->id.driver_info = id->driver_info;
- else
- return -ENODEV;
+ } else {
+ retval = -ENODEV;
+ goto fail;
+ }
}
spin_lock(&dynids->lock);
@@ -95,6 +101,10 @@
if (retval)
return retval;
return count;
+
+fail:
+ kfree(dynid);
+ return retval;
}
EXPORT_SYMBOL_GPL(usb_store_new_id);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 199aaea..2518c32 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1032,7 +1032,6 @@
dev_name(&usb_dev->dev), retval);
return retval;
}
- usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
}
retval = usb_new_device (usb_dev);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index babba88..64ea219 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -128,7 +128,7 @@
return usb_get_intfdata(hdev->actconfig->interface[0]);
}
-int usb_device_supports_lpm(struct usb_device *udev)
+static int usb_device_supports_lpm(struct usb_device *udev)
{
/* USB 2.1 (and greater) devices indicate LPM support through
* their USB 2.0 Extended Capabilities BOS descriptor.
@@ -149,11 +149,6 @@
"Power management will be impacted.\n");
return 0;
}
-
- /* udev is root hub */
- if (!udev->parent)
- return 1;
-
if (udev->parent->lpm_capable)
return 1;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index c493836..8238577 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -35,7 +35,6 @@
unsigned int size);
extern int usb_get_bos_descriptor(struct usb_device *dev);
extern void usb_release_bos_descriptor(struct usb_device *dev);
-extern int usb_device_supports_lpm(struct usb_device *udev);
extern char *usb_cache_string(struct usb_device *udev, int index);
extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern int usb_choose_configuration(struct usb_device *udev);
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 8565d87..1d12988 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -216,7 +216,7 @@
int retval = 0;
if (!select_phy)
- return -ENODEV;
+ return 0;
usbcfg = readl(hsotg->regs + GUSBCFG);
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index f59484d..4d918ed 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -2565,25 +2565,14 @@
struct usb_host_endpoint *ep)
{
struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
- int is_control = usb_endpoint_xfer_control(&ep->desc);
- int is_out = usb_endpoint_dir_out(&ep->desc);
- int epnum = usb_endpoint_num(&ep->desc);
- struct usb_device *udev;
unsigned long flags;
dev_dbg(hsotg->dev,
"DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n",
ep->desc.bEndpointAddress);
- udev = to_usb_device(hsotg->dev);
-
spin_lock_irqsave(&hsotg->lock, flags);
-
- usb_settoggle(udev, epnum, is_out, 0);
- if (is_control)
- usb_settoggle(udev, epnum, !is_out, 0);
dwc2_hcd_endpoint_reset(hsotg, ep);
-
spin_unlock_irqrestore(&hsotg->lock, flags);
}
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index d01d0d3..eaba547 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -124,6 +124,9 @@
int retval;
int irq;
+ if (usb_disabled())
+ return -ENODEV;
+
match = of_match_device(dwc2_of_match_table, &dev->dev);
if (match && match->data) {
params = match->data;
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index b016d38..eb009a4 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -203,12 +203,12 @@
addr, (unsigned int)temp);
addr = &ir_set->erst_base;
- temp_64 = readq(addr);
+ temp_64 = xhci_read_64(xhci, addr);
xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n",
addr, temp_64);
addr = &ir_set->erst_dequeue;
- temp_64 = readq(addr);
+ temp_64 = xhci_read_64(xhci, addr);
xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n",
addr, temp_64);
}
@@ -412,7 +412,7 @@
{
u64 val;
- val = readq(&xhci->op_regs->cmd_ring);
+ val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n",
lower_32_bits(val));
xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n",
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 873c272..bce4391 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1958,7 +1958,7 @@
xhci_warn(xhci, "WARN something wrong with SW event ring "
"dequeue ptr.\n");
/* Update HC event ring dequeue pointer */
- temp = readq(&xhci->ir_set->erst_dequeue);
+ temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp &= ERST_PTR_MASK;
/* Don't clear the EHB bit (which is RW1C) because
* there might be more events to service.
@@ -1967,7 +1967,7 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Write event ring dequeue pointer, "
"preserving EHB bit");
- writeq(((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+ xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
&xhci->ir_set->erst_dequeue);
}
@@ -2269,7 +2269,7 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Device context base array address = 0x%llx (DMA), %p (virt)",
(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
- writeq(dma, &xhci->op_regs->dcbaa_ptr);
+ xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
/*
* Initialize the ring segment pool. The ring must be a contiguous
@@ -2312,13 +2312,13 @@
(unsigned long long)xhci->cmd_ring->first_seg->dma);
/* Set the address in the Command Ring Control register */
- val_64 = readq(&xhci->op_regs->cmd_ring);
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
xhci->cmd_ring->cycle_state;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Setting command ring address to 0x%x", val);
- writeq(val_64, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
xhci_dbg_cmd_ptrs(xhci);
xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags);
@@ -2396,10 +2396,10 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Set ERST base address for ir_set 0 = 0x%llx",
(unsigned long long)xhci->erst.erst_dma_addr);
- val_64 = readq(&xhci->ir_set->erst_base);
+ val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
val_64 &= ERST_PTR_MASK;
val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
- writeq(val_64, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
/* Set the event ring dequeue address */
xhci_set_hc_event_deq(xhci);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 3c898c1..04f986d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -142,6 +142,11 @@
"QUIRK: Resetting on resume");
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
}
+ if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+ pdev->device == 0x0015 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+ pdev->subsystem_device == 0xc0cd)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a0b248c..0ed64eb 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -307,13 +307,14 @@
return 0;
}
- temp_64 = readq(&xhci->op_regs->cmd_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if (!(temp_64 & CMD_RING_RUNNING)) {
xhci_dbg(xhci, "Command ring had been stopped\n");
return 0;
}
xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
- writeq(temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+ &xhci->op_regs->cmd_ring);
/* Section 4.6.1.2 of xHCI 1.0 spec says software should
* time the completion od all xHCI commands, including
@@ -2864,8 +2865,9 @@
/* Clear the event handler busy flag (RW1C);
* the event ring should be empty.
*/
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
- writeq(temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB,
+ &xhci->ir_set->erst_dequeue);
spin_unlock(&xhci->lock);
return IRQ_HANDLED;
@@ -2877,7 +2879,7 @@
*/
while (xhci_handle_event(xhci) > 0) {}
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
/* If necessary, update the HW's version of the event ring deq ptr. */
if (event_ring_deq != xhci->event_ring->dequeue) {
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
@@ -2892,7 +2894,7 @@
/* Clear the event handler busy flag (RW1C); event ring is empty. */
temp_64 |= ERST_EHB;
- writeq(temp_64, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
spin_unlock(&xhci->lock);
@@ -2965,58 +2967,8 @@
}
while (1) {
- if (room_on_ring(xhci, ep_ring, num_trbs)) {
- union xhci_trb *trb = ep_ring->enqueue;
- unsigned int usable = ep_ring->enq_seg->trbs +
- TRBS_PER_SEGMENT - 1 - trb;
- u32 nop_cmd;
-
- /*
- * Section 4.11.7.1 TD Fragments states that a link
- * TRB must only occur at the boundary between
- * data bursts (eg 512 bytes for 480M).
- * While it is possible to split a large fragment
- * we don't know the size yet.
- * Simplest solution is to fill the trb before the
- * LINK with nop commands.
- */
- if (num_trbs == 1 || num_trbs <= usable || usable == 0)
- break;
-
- if (ep_ring->type != TYPE_BULK)
- /*
- * While isoc transfers might have a buffer that
- * crosses a 64k boundary it is unlikely.
- * Since we can't add NOPs without generating
- * gaps in the traffic just hope it never
- * happens at the end of the ring.
- * This could be fixed by writing a LINK TRB
- * instead of the first NOP - however the
- * TRB_TYPE_LINK_LE32() calls would all need
- * changing to check the ring length.
- */
- break;
-
- if (num_trbs >= TRBS_PER_SEGMENT) {
- xhci_err(xhci, "Too many fragments %d, max %d\n",
- num_trbs, TRBS_PER_SEGMENT - 1);
- return -EINVAL;
- }
-
- nop_cmd = cpu_to_le32(TRB_TYPE(TRB_TR_NOOP) |
- ep_ring->cycle_state);
- ep_ring->num_trbs_free -= usable;
- do {
- trb->generic.field[0] = 0;
- trb->generic.field[1] = 0;
- trb->generic.field[2] = 0;
- trb->generic.field[3] = nop_cmd;
- trb++;
- } while (--usable);
- ep_ring->enqueue = trb;
- if (room_on_ring(xhci, ep_ring, num_trbs))
- break;
- }
+ if (room_on_ring(xhci, ep_ring, num_trbs))
+ break;
if (ep_ring == xhci->cmd_ring) {
xhci_err(xhci, "Do not support expand command ring\n");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ad36439..6fe577d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -611,7 +611,7 @@
xhci_dbg(xhci, "Event ring:\n");
xhci_debug_ring(xhci, xhci->event_ring);
xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp_64 &= ~ERST_PTR_MASK;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
@@ -756,11 +756,11 @@
{
xhci->s3.command = readl(&xhci->op_regs->command);
xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification);
- xhci->s3.dcbaa_ptr = readq(&xhci->op_regs->dcbaa_ptr);
+ xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci->s3.config_reg = readl(&xhci->op_regs->config_reg);
xhci->s3.erst_size = readl(&xhci->ir_set->erst_size);
- xhci->s3.erst_base = readq(&xhci->ir_set->erst_base);
- xhci->s3.erst_dequeue = readq(&xhci->ir_set->erst_dequeue);
+ xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+ xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending);
xhci->s3.irq_control = readl(&xhci->ir_set->irq_control);
}
@@ -769,11 +769,11 @@
{
writel(xhci->s3.command, &xhci->op_regs->command);
writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
- writeq(xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
+ xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
writel(xhci->s3.config_reg, &xhci->op_regs->config_reg);
writel(xhci->s3.erst_size, &xhci->ir_set->erst_size);
- writeq(xhci->s3.erst_base, &xhci->ir_set->erst_base);
- writeq(xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
writel(xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
writel(xhci->s3.irq_control, &xhci->ir_set->irq_control);
}
@@ -783,7 +783,7 @@
u64 val_64;
/* step 2: initialize command ring buffer */
- val_64 = readq(&xhci->op_regs->cmd_ring);
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
xhci->cmd_ring->dequeue) &
@@ -792,7 +792,7 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Setting command ring address to 0x%llx",
(long unsigned long) val_64);
- writeq(val_64, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
}
/*
@@ -3842,7 +3842,7 @@
if (ret) {
return ret;
}
- temp_64 = readq(&xhci->op_regs->dcbaa_ptr);
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Op regs DCBAA ptr = %#016llx", temp_64);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
@@ -4730,11 +4730,8 @@
struct device *dev = hcd->self.controller;
int retval;
- /* Limit the block layer scatter-gather lists to half a segment. */
- hcd->self.sg_tablesize = TRBS_PER_SEGMENT / 2;
-
- /* support to build packet from discontinuous buffers */
- hcd->self.no_sg_constraint = 1;
+ /* Accept arbitrarily long scatter-gather lists */
+ hcd->self.sg_tablesize = ~0;
/* XHCI controllers don't stop the ep queue on short packets :| */
hcd->self.no_stop_on_short = 1;
@@ -4760,6 +4757,14 @@
/* xHCI private pointer was set in xhci_pci_probe for the second
* registered roothub.
*/
+ xhci = hcd_to_xhci(hcd);
+ /*
+ * Support arbitrarily aligned sg-list entries on hosts without
+ * TD fragment rules (which are currently unsupported).
+ */
+ if (xhci->hci_version < 0x100)
+ hcd->self.no_sg_constraint = 1;
+
return 0;
}
@@ -4788,6 +4793,9 @@
if (xhci->hci_version > 0x96)
xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+ if (xhci->hci_version < 0x100)
+ hcd->self.no_sg_constraint = 1;
+
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
if (retval)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index f8416639..58ed9d0 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -28,17 +28,6 @@
#include <linux/kernel.h>
#include <linux/usb/hcd.h>
-/*
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers. Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
- */
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
-
/* Code sharing between pci-quirks and xhci hcd */
#include "xhci-ext-caps.h"
#include "pci-quirks.h"
@@ -1279,7 +1268,7 @@
* since the command ring is 64-byte aligned.
* It must also be greater than 16.
*/
-#define TRBS_PER_SEGMENT 256
+#define TRBS_PER_SEGMENT 64
/* Allow two commands + a link TRB, along with any reserved command TRBs */
#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
@@ -1614,6 +1603,34 @@
#define xhci_warn_ratelimited(xhci, fmt, args...) \
dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+ __le64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u64 val_lo = readl(ptr);
+ u64 val_hi = readl(ptr + 1);
+ return val_lo + (val_hi << 32);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+ const u64 val, __le64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u32 val_lo = lower_32_bits(val);
+ u32 val_hi = upper_32_bits(val);
+
+ writel(val_lo, ptr);
+ writel(val_hi, ptr + 1);
+}
+
static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
{
return xhci->quirks & XHCI_LINK_TRB_QUIRK;
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index e6f61e4..8afa813 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -130,7 +130,7 @@
phy = __usb_find_phy(&phy_list, type);
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
- pr_err("unable to find transceiver of type %s\n",
+ pr_debug("PHY: unable to find transceiver of type %s\n",
usb_phy_type_string(type));
goto err0;
}
@@ -228,7 +228,7 @@
phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
- pr_err("unable to find transceiver\n");
+ dev_dbg(dev, "unable to find transceiver\n");
goto err0;
}
@@ -424,10 +424,8 @@
unsigned long flags;
phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
- if (!phy_bind) {
- pr_err("phy_bind(): No memory for phy_bind");
+ if (!phy_bind)
return -ENOMEM;
- }
phy_bind->dev_name = dev_name;
phy_bind->phy_dev_name = phy_dev_name;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ce0d7b0..ee1f00f 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -152,6 +152,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -191,6 +192,8 @@
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index a7019d1..1e2d369 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -50,6 +50,7 @@
#define TI_XDS100V2_PID 0xa6d0
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+#define FTDI_EV3CON_PID 0xABB9 /* Mindstorms EV3 Console Adapter */
/* US Interface Navigator (http://www.usinterface.com/) */
#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */
@@ -363,6 +364,12 @@
/* Sprog II (Andrew Crosland's SprogII DCC interface) */
#define FTDI_SPROG_II 0xF0C8
+/*
+ * Two of the Tagsys RFID Readers
+ */
+#define FTDI_TAGSYS_LP101_PID 0xF0E9 /* Tagsys L-P101 RFID*/
+#define FTDI_TAGSYS_P200X_PID 0xF0EE /* Tagsys Medio P200x RFID*/
+
/* an infrared receiver for user access control with IR tags */
#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5c86f57..216d20a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1362,7 +1362,8 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1267, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index c65437c..968a402 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -139,6 +139,9 @@
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index f112b07..fb79775 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -71,7 +71,8 @@
/* Suunto ANT+ USB Driver */
#define SUUNTO_IDS() \
- { USB_DEVICE(0x0fcf, 0x1008) }
+ { USB_DEVICE(0x0fcf, 0x1008) }, \
+ { USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */
DEVICE(suunto, SUUNTO_IDS);
/* Siemens USB/MPI adapter */
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 8470e1b..1dd0604 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -18,7 +18,9 @@
This option depends on 'SCSI' support being enabled, but you
probably also need 'SCSI device support: SCSI disk support'
- (BLK_DEV_SD) for most USB storage devices.
+ (BLK_DEV_SD) for most USB storage devices. Some devices also
+ will require 'Probe all LUNs on each SCSI device'
+ (SCSI_MULTI_LUN).
To compile this driver as a module, choose M here: the
module will be called usb-storage.
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 18509e6..9d38ddc 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -78,6 +78,8 @@
static int slave_alloc (struct scsi_device *sdev)
{
+ struct us_data *us = host_to_us(sdev->host);
+
/*
* Set the INQUIRY transfer length to 36. We don't use any of
* the extra data and many devices choke if asked for more or
@@ -102,6 +104,10 @@
*/
blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+ /* Tell the SCSI layer if we know there is more than one LUN */
+ if (us->protocol == USB_PR_BULK && us->max_lun > 0)
+ sdev->sdev_bflags |= BLIST_FORCELUN;
+
return 0;
}
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index 65a6a75..82e8ed0 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -31,7 +31,7 @@
"Cypress ISD-300LP",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
-UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x0219,
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160,
"Super Top",
"USB 2.0 SATA BRIDGE",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index ad06255..adbeb25 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1455,6 +1455,13 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> */
+UNUSUAL_DEV( 0x0fca, 0x8004, 0x0201, 0x0201,
+ "Research In Motion",
+ "BlackBerry Bold 9000",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 22262a3..dade5b7 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -364,7 +364,7 @@
config FB_IMX
tristate "Freescale i.MX1/21/25/27 LCD support"
- depends on FB && IMX_HAVE_PLATFORM_IMX_FB
+ depends on FB && ARCH_MXC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/exynos/Kconfig b/drivers/video/exynos/Kconfig
index 1129d0e..75c8a8e 100644
--- a/drivers/video/exynos/Kconfig
+++ b/drivers/video/exynos/Kconfig
@@ -22,7 +22,8 @@
config EXYNOS_LCD_S6E8AX0
bool "S6E8AX0 MIPI AMOLED LCD Driver"
- depends on (EXYNOS_MIPI_DSI && BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE)
+ depends on EXYNOS_MIPI_DSI && BACKLIGHT_CLASS_DEVICE
+ depends on (LCD_CLASS_DEVICE = y)
default n
help
If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index bbeb8dd..77d6221 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2160,8 +2160,8 @@
*five_taps = false;
do {
- in_height = DIV_ROUND_UP(height, *decim_y);
- in_width = DIV_ROUND_UP(width, *decim_x);
+ in_height = height / *decim_y;
+ in_width = width / *decim_x;
*core_clk = dispc.feat->calc_core_clk(pclk, in_width,
in_height, out_width, out_height, mem_to_mem);
error = (in_width > maxsinglelinewidth || !*core_clk ||
@@ -2199,8 +2199,8 @@
dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
do {
- in_height = DIV_ROUND_UP(height, *decim_y);
- in_width = DIV_ROUND_UP(width, *decim_x);
+ in_height = height / *decim_y;
+ in_width = width / *decim_x;
*five_taps = in_height > out_height;
if (in_width > maxsinglelinewidth)
@@ -2268,7 +2268,7 @@
{
u16 in_width, in_width_max;
int decim_x_min = *decim_x;
- u16 in_height = DIV_ROUND_UP(height, *decim_y);
+ u16 in_height = height / *decim_y;
const int maxsinglelinewidth =
dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
@@ -2287,7 +2287,7 @@
return -EINVAL;
do {
- in_width = DIV_ROUND_UP(width, *decim_x);
+ in_width = width / *decim_x;
} while (*decim_x <= *x_predecim &&
in_width > maxsinglelinewidth && ++*decim_x);
@@ -2466,8 +2466,8 @@
if (r)
return r;
- in_width = DIV_ROUND_UP(in_width, x_predecim);
- in_height = DIV_ROUND_UP(in_height, y_predecim);
+ in_width = in_width / x_predecim;
+ in_height = in_height / y_predecim;
if (color_mode == OMAP_DSS_COLOR_YUV2 ||
color_mode == OMAP_DSS_COLOR_UYVY ||
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 7411f26..23ef21f 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -117,7 +117,7 @@
/* outputs */
struct dsi_clock_info dsi_cinfo;
- unsigned long long fck;
+ unsigned long fck;
struct dispc_clock_info dispc_cinfo;
};
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index efb9ee9..ba806c9 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -46,7 +46,7 @@
struct sdi_clk_calc_ctx {
unsigned long pck_min, pck_max;
- unsigned long long fck;
+ unsigned long fck;
struct dispc_clock_info dispc_cinfo;
};
diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
index a06edbf..1b5d48c 100644
--- a/drivers/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -884,7 +884,7 @@
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
*(u8 *)(buf + done) = ioread8(addr + done);
done += 1;
@@ -938,7 +938,7 @@
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
iowrite8(*(u8 *)(buf + done), addr + done);
done += 1;
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index 16830d8..9911cd5 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -1289,7 +1289,7 @@
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
*(u8 *)(buf + done) = ioread8(addr + done);
done += 1;
@@ -1371,7 +1371,7 @@
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
iowrite8(*(u8 *)(buf + done), addr + done);
done += 1;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4c4c566..79d2589 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -223,6 +223,7 @@
config DW_WATCHDOG
tristate "Synopsys DesignWare watchdog"
+ depends on HAS_IOMEM
help
Say Y here if to include support for the Synopsys DesignWare
watchdog timer found in many chips.
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index d75c811..45e00af 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -16,7 +16,6 @@
dom0-$(CONFIG_X86) += pcpu.o
obj-$(CONFIG_XEN_DOM0) += $(dom0-y)
obj-$(CONFIG_BLOCK) += biomerge.o
-obj-$(CONFIG_XEN_XENCOMM) += xencomm.o
obj-$(CONFIG_XEN_BALLOON) += xen-balloon.o
obj-$(CONFIG_XEN_SELFBALLOONING) += xen-selfballoon.o
obj-$(CONFIG_XEN_DEV_EVTCHN) += xen-evtchn.o
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index 4672e00..f4a9e33 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -862,6 +862,8 @@
irq = ret;
goto out;
}
+ /* New interdomain events are bound to VCPU 0. */
+ bind_evtchn_to_cpu(evtchn, 0);
} else {
struct irq_info *info = info_for_irq(irq);
WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index 34a2704..073b4a1 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -284,10 +284,8 @@
}
pr_debug("map %d+%d\n", map->index, map->count);
- err = gnttab_map_refs_userspace(map->map_ops,
- use_ptemod ? map->kmap_ops : NULL,
- map->pages,
- map->count);
+ err = gnttab_map_refs(map->map_ops, use_ptemod ? map->kmap_ops : NULL,
+ map->pages, map->count);
if (err)
return err;
@@ -317,10 +315,9 @@
}
}
- err = gnttab_unmap_refs_userspace(map->unmap_ops + offset,
- use_ptemod ? map->kmap_ops + offset : NULL,
- map->pages + offset,
- pages);
+ err = gnttab_unmap_refs(map->unmap_ops + offset,
+ use_ptemod ? map->kmap_ops + offset : NULL, map->pages + offset,
+ pages);
if (err)
return err;
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index 8ee13e2..b84e3ab 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -928,17 +928,15 @@
}
EXPORT_SYMBOL_GPL(gnttab_batch_copy);
-int __gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
+int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count,
- bool m2p_override)
+ struct page **pages, unsigned int count)
{
int i, ret;
bool lazy = false;
pte_t *pte;
- unsigned long mfn, pfn;
+ unsigned long mfn;
- BUG_ON(kmap_ops && !m2p_override);
ret = HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, map_ops, count);
if (ret)
return ret;
@@ -957,12 +955,10 @@
set_phys_to_machine(map_ops[i].host_addr >> PAGE_SHIFT,
map_ops[i].dev_bus_addr >> PAGE_SHIFT);
}
- return 0;
+ return ret;
}
- if (m2p_override &&
- !in_interrupt() &&
- paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) {
+ if (!in_interrupt() && paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) {
arch_enter_lazy_mmu_mode();
lazy = true;
}
@@ -979,20 +975,8 @@
} else {
mfn = PFN_DOWN(map_ops[i].dev_bus_addr);
}
- pfn = page_to_pfn(pages[i]);
-
- WARN_ON(PagePrivate(pages[i]));
- SetPagePrivate(pages[i]);
- set_page_private(pages[i], mfn);
-
- pages[i]->index = pfn_to_mfn(pfn);
- if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn)))) {
- ret = -ENOMEM;
- goto out;
- }
- if (m2p_override)
- ret = m2p_add_override(mfn, pages[i], kmap_ops ?
- &kmap_ops[i] : NULL);
+ ret = m2p_add_override(mfn, pages[i], kmap_ops ?
+ &kmap_ops[i] : NULL);
if (ret)
goto out;
}
@@ -1003,32 +987,15 @@
return ret;
}
-
-int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
- struct page **pages, unsigned int count)
-{
- return __gnttab_map_refs(map_ops, NULL, pages, count, false);
-}
EXPORT_SYMBOL_GPL(gnttab_map_refs);
-int gnttab_map_refs_userspace(struct gnttab_map_grant_ref *map_ops,
- struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count)
-{
- return __gnttab_map_refs(map_ops, kmap_ops, pages, count, true);
-}
-EXPORT_SYMBOL_GPL(gnttab_map_refs_userspace);
-
-int __gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops,
+int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops,
struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count,
- bool m2p_override)
+ struct page **pages, unsigned int count)
{
int i, ret;
bool lazy = false;
- unsigned long pfn, mfn;
- BUG_ON(kmap_ops && !m2p_override);
ret = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, unmap_ops, count);
if (ret)
return ret;
@@ -1039,33 +1006,17 @@
set_phys_to_machine(unmap_ops[i].host_addr >> PAGE_SHIFT,
INVALID_P2M_ENTRY);
}
- return 0;
+ return ret;
}
- if (m2p_override &&
- !in_interrupt() &&
- paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) {
+ if (!in_interrupt() && paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) {
arch_enter_lazy_mmu_mode();
lazy = true;
}
for (i = 0; i < count; i++) {
- pfn = page_to_pfn(pages[i]);
- mfn = get_phys_to_machine(pfn);
- if (mfn == INVALID_P2M_ENTRY || !(mfn & FOREIGN_FRAME_BIT)) {
- ret = -EINVAL;
- goto out;
- }
-
- set_page_private(pages[i], INVALID_P2M_ENTRY);
- WARN_ON(!PagePrivate(pages[i]));
- ClearPagePrivate(pages[i]);
- set_phys_to_machine(pfn, pages[i]->index);
- if (m2p_override)
- ret = m2p_remove_override(pages[i],
- kmap_ops ?
- &kmap_ops[i] : NULL,
- mfn);
+ ret = m2p_remove_override(pages[i], kmap_ops ?
+ &kmap_ops[i] : NULL);
if (ret)
goto out;
}
@@ -1076,22 +1027,8 @@
return ret;
}
-
-int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *map_ops,
- struct page **pages, unsigned int count)
-{
- return __gnttab_unmap_refs(map_ops, NULL, pages, count, false);
-}
EXPORT_SYMBOL_GPL(gnttab_unmap_refs);
-int gnttab_unmap_refs_userspace(struct gnttab_unmap_grant_ref *map_ops,
- struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count)
-{
- return __gnttab_unmap_refs(map_ops, kmap_ops, pages, count, true);
-}
-EXPORT_SYMBOL_GPL(gnttab_unmap_refs_userspace);
-
static unsigned nr_status_frames(unsigned nr_grant_frames)
{
BUG_ON(grefs_per_grant_frame == 0);
diff --git a/drivers/xen/xencomm.c b/drivers/xen/xencomm.c
deleted file mode 100644
index 4793fc5..0000000
--- a/drivers/xen/xencomm.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) IBM Corp. 2006
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <asm/page.h>
-#include <xen/xencomm.h>
-#include <xen/interface/xen.h>
-#include <asm/xen/xencomm.h> /* for xencomm_is_phys_contiguous() */
-
-static int xencomm_init(struct xencomm_desc *desc,
- void *buffer, unsigned long bytes)
-{
- unsigned long recorded = 0;
- int i = 0;
-
- while ((recorded < bytes) && (i < desc->nr_addrs)) {
- unsigned long vaddr = (unsigned long)buffer + recorded;
- unsigned long paddr;
- int offset;
- int chunksz;
-
- offset = vaddr % PAGE_SIZE; /* handle partial pages */
- chunksz = min(PAGE_SIZE - offset, bytes - recorded);
-
- paddr = xencomm_vtop(vaddr);
- if (paddr == ~0UL) {
- printk(KERN_DEBUG "%s: couldn't translate vaddr %lx\n",
- __func__, vaddr);
- return -EINVAL;
- }
-
- desc->address[i++] = paddr;
- recorded += chunksz;
- }
-
- if (recorded < bytes) {
- printk(KERN_DEBUG
- "%s: could only translate %ld of %ld bytes\n",
- __func__, recorded, bytes);
- return -ENOSPC;
- }
-
- /* mark remaining addresses invalid (just for safety) */
- while (i < desc->nr_addrs)
- desc->address[i++] = XENCOMM_INVALID;
-
- desc->magic = XENCOMM_MAGIC;
-
- return 0;
-}
-
-static struct xencomm_desc *xencomm_alloc(gfp_t gfp_mask,
- void *buffer, unsigned long bytes)
-{
- struct xencomm_desc *desc;
- unsigned long buffer_ulong = (unsigned long)buffer;
- unsigned long start = buffer_ulong & PAGE_MASK;
- unsigned long end = (buffer_ulong + bytes) | ~PAGE_MASK;
- unsigned long nr_addrs = (end - start + 1) >> PAGE_SHIFT;
- unsigned long size = sizeof(*desc) +
- sizeof(desc->address[0]) * nr_addrs;
-
- /*
- * slab allocator returns at least sizeof(void*) aligned pointer.
- * When sizeof(*desc) > sizeof(void*), struct xencomm_desc might
- * cross page boundary.
- */
- if (sizeof(*desc) > sizeof(void *)) {
- unsigned long order = get_order(size);
- desc = (struct xencomm_desc *)__get_free_pages(gfp_mask,
- order);
- if (desc == NULL)
- return NULL;
-
- desc->nr_addrs =
- ((PAGE_SIZE << order) - sizeof(struct xencomm_desc)) /
- sizeof(*desc->address);
- } else {
- desc = kmalloc(size, gfp_mask);
- if (desc == NULL)
- return NULL;
-
- desc->nr_addrs = nr_addrs;
- }
- return desc;
-}
-
-void xencomm_free(struct xencomm_handle *desc)
-{
- if (desc && !((ulong)desc & XENCOMM_INLINE_FLAG)) {
- struct xencomm_desc *desc__ = (struct xencomm_desc *)desc;
- if (sizeof(*desc__) > sizeof(void *)) {
- unsigned long size = sizeof(*desc__) +
- sizeof(desc__->address[0]) * desc__->nr_addrs;
- unsigned long order = get_order(size);
- free_pages((unsigned long)__va(desc), order);
- } else
- kfree(__va(desc));
- }
-}
-
-static int xencomm_create(void *buffer, unsigned long bytes,
- struct xencomm_desc **ret, gfp_t gfp_mask)
-{
- struct xencomm_desc *desc;
- int rc;
-
- pr_debug("%s: %p[%ld]\n", __func__, buffer, bytes);
-
- if (bytes == 0) {
- /* don't create a descriptor; Xen recognizes NULL. */
- BUG_ON(buffer != NULL);
- *ret = NULL;
- return 0;
- }
-
- BUG_ON(buffer == NULL); /* 'bytes' is non-zero */
-
- desc = xencomm_alloc(gfp_mask, buffer, bytes);
- if (!desc) {
- printk(KERN_DEBUG "%s failure\n", "xencomm_alloc");
- return -ENOMEM;
- }
-
- rc = xencomm_init(desc, buffer, bytes);
- if (rc) {
- printk(KERN_DEBUG "%s failure: %d\n", "xencomm_init", rc);
- xencomm_free((struct xencomm_handle *)__pa(desc));
- return rc;
- }
-
- *ret = desc;
- return 0;
-}
-
-static struct xencomm_handle *xencomm_create_inline(void *ptr)
-{
- unsigned long paddr;
-
- BUG_ON(!xencomm_is_phys_contiguous((unsigned long)ptr));
-
- paddr = (unsigned long)xencomm_pa(ptr);
- BUG_ON(paddr & XENCOMM_INLINE_FLAG);
- return (struct xencomm_handle *)(paddr | XENCOMM_INLINE_FLAG);
-}
-
-/* "mini" routine, for stack-based communications: */
-static int xencomm_create_mini(void *buffer,
- unsigned long bytes, struct xencomm_mini *xc_desc,
- struct xencomm_desc **ret)
-{
- int rc = 0;
- struct xencomm_desc *desc;
- BUG_ON(((unsigned long)xc_desc) % sizeof(*xc_desc) != 0);
-
- desc = (void *)xc_desc;
-
- desc->nr_addrs = XENCOMM_MINI_ADDRS;
-
- rc = xencomm_init(desc, buffer, bytes);
- if (!rc)
- *ret = desc;
-
- return rc;
-}
-
-struct xencomm_handle *xencomm_map(void *ptr, unsigned long bytes)
-{
- int rc;
- struct xencomm_desc *desc;
-
- if (xencomm_is_phys_contiguous((unsigned long)ptr))
- return xencomm_create_inline(ptr);
-
- rc = xencomm_create(ptr, bytes, &desc, GFP_KERNEL);
-
- if (rc || desc == NULL)
- return NULL;
-
- return xencomm_pa(desc);
-}
-
-struct xencomm_handle *__xencomm_map_no_alloc(void *ptr, unsigned long bytes,
- struct xencomm_mini *xc_desc)
-{
- int rc;
- struct xencomm_desc *desc = NULL;
-
- if (xencomm_is_phys_contiguous((unsigned long)ptr))
- return xencomm_create_inline(ptr);
-
- rc = xencomm_create_mini(ptr, bytes, xc_desc,
- &desc);
-
- if (rc)
- return NULL;
-
- return xencomm_pa(desc);
-}
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 0bad24d..0129b78 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -114,6 +114,14 @@
}
EXPORT_SYMBOL(bio_integrity_free);
+static inline unsigned int bip_integrity_vecs(struct bio_integrity_payload *bip)
+{
+ if (bip->bip_slab == BIO_POOL_NONE)
+ return BIP_INLINE_VECS;
+
+ return bvec_nr_vecs(bip->bip_slab);
+}
+
/**
* bio_integrity_add_page - Attach integrity metadata
* @bio: bio to update
@@ -129,7 +137,7 @@
struct bio_integrity_payload *bip = bio->bi_integrity;
struct bio_vec *iv;
- if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_slab)) {
+ if (bip->bip_vcnt >= bip_integrity_vecs(bip)) {
printk(KERN_ERR "%s: bip_vec full\n", __func__);
return 0;
}
@@ -226,7 +234,8 @@
}
EXPORT_SYMBOL(bio_integrity_tag_size);
-int bio_integrity_tag(struct bio *bio, void *tag_buf, unsigned int len, int set)
+static int bio_integrity_tag(struct bio *bio, void *tag_buf, unsigned int len,
+ int set)
{
struct bio_integrity_payload *bip = bio->bi_integrity;
struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
diff --git a/fs/bio.c b/fs/bio.c
index 75c49a3..8754e7b 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -611,7 +611,6 @@
struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs)
{
- unsigned nr_iovecs = 0;
struct bvec_iter iter;
struct bio_vec bv;
struct bio *bio;
@@ -638,10 +637,7 @@
* __bio_clone_fast() anyways.
*/
- bio_for_each_segment(bv, bio_src, iter)
- nr_iovecs++;
-
- bio = bio_alloc_bioset(gfp_mask, nr_iovecs, bs);
+ bio = bio_alloc_bioset(gfp_mask, bio_segments(bio_src), bs);
if (!bio)
return NULL;
@@ -650,9 +646,18 @@
bio->bi_iter.bi_sector = bio_src->bi_iter.bi_sector;
bio->bi_iter.bi_size = bio_src->bi_iter.bi_size;
+ if (bio->bi_rw & REQ_DISCARD)
+ goto integrity_clone;
+
+ if (bio->bi_rw & REQ_WRITE_SAME) {
+ bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0];
+ goto integrity_clone;
+ }
+
bio_for_each_segment(bv, bio_src, iter)
bio->bi_io_vec[bio->bi_vcnt++] = bv;
+integrity_clone:
if (bio_integrity(bio_src)) {
int ret;
diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c
index 49a62b4..0e8388e 100644
--- a/fs/btrfs/check-integrity.c
+++ b/fs/btrfs/check-integrity.c
@@ -92,11 +92,11 @@
#include <linux/slab.h>
#include <linux/buffer_head.h>
#include <linux/mutex.h>
-#include <linux/crc32c.h>
#include <linux/genhd.h>
#include <linux/blkdev.h>
#include "ctree.h"
#include "disk-io.h"
+#include "hash.h"
#include "transaction.h"
#include "extent_io.h"
#include "volumes.h"
@@ -1823,7 +1823,7 @@
size_t sublen = i ? PAGE_CACHE_SIZE :
(PAGE_CACHE_SIZE - BTRFS_CSUM_SIZE);
- crc = crc32c(crc, data, sublen);
+ crc = btrfs_crc32c(crc, data, sublen);
}
btrfs_csum_final(crc, csum);
if (memcmp(csum, h->csum, state->csum_size))
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index e2600cd..b01fb6c 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -1010,6 +1010,8 @@
bytes = min(bytes, working_bytes);
kaddr = kmap_atomic(page_out);
memcpy(kaddr + *pg_offset, buf + buf_offset, bytes);
+ if (*pg_index == (vcnt - 1) && *pg_offset == 0)
+ memset(kaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
kunmap_atomic(kaddr);
flush_dcache_page(page_out);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 0e69295..81ea553 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -26,7 +26,6 @@
#include <linux/workqueue.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
-#include <linux/crc32c.h>
#include <linux/slab.h>
#include <linux/migrate.h>
#include <linux/ratelimit.h>
@@ -35,6 +34,7 @@
#include <asm/unaligned.h>
#include "ctree.h"
#include "disk-io.h"
+#include "hash.h"
#include "transaction.h"
#include "btrfs_inode.h"
#include "volumes.h"
@@ -244,7 +244,7 @@
u32 btrfs_csum_data(char *data, u32 seed, size_t len)
{
- return crc32c(seed, data, len);
+ return btrfs_crc32c(seed, data, len);
}
void btrfs_csum_final(u32 crc, char *result)
@@ -3839,7 +3839,6 @@
rb_erase(&ref->rb_node, &head->ref_root);
atomic_dec(&delayed_refs->num_entries);
btrfs_put_delayed_ref(ref);
- cond_resched_lock(&head->lock);
}
if (head->must_insert_reserved)
pin_bytes = true;
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 9c9ecc9..32312e0 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -2385,6 +2385,7 @@
spin_unlock(&delayed_refs->lock);
locked_ref = NULL;
cond_resched();
+ count++;
continue;
}
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 5c4ab9c..d3d4448 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2629,7 +2629,7 @@
EXTENT_DEFRAG, 1, cached_state);
if (ret) {
u64 last_snapshot = btrfs_root_last_snapshot(&root->root_item);
- if (last_snapshot >= BTRFS_I(inode)->generation)
+ if (0 && last_snapshot >= BTRFS_I(inode)->generation)
/* the inode is shared */
new = record_old_file_extents(inode, ordered_extent);
@@ -5154,7 +5154,7 @@
return ERR_CAST(inode);
}
- return d_splice_alias(inode, dentry);
+ return d_materialise_unique(dentry, inode);
}
unsigned char btrfs_filetype_table[] = {
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index b013489..a6d8efa 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3537,20 +3537,6 @@
return ret;
}
-static long btrfs_ioctl_global_rsv(struct btrfs_root *root, void __user *arg)
-{
- struct btrfs_block_rsv *block_rsv = &root->fs_info->global_block_rsv;
- u64 reserved;
-
- spin_lock(&block_rsv->lock);
- reserved = block_rsv->reserved;
- spin_unlock(&block_rsv->lock);
-
- if (arg && copy_to_user(arg, &reserved, sizeof(reserved)))
- return -EFAULT;
- return 0;
-}
-
/*
* there are many ways the trans_start and trans_end ioctls can lead
* to deadlocks. They should only be used by applications that
@@ -4525,7 +4511,7 @@
spin_lock(&root->fs_info->super_lock);
strcpy(super_block->label, label);
spin_unlock(&root->fs_info->super_lock);
- ret = btrfs_end_transaction(trans, root);
+ ret = btrfs_commit_transaction(trans, root);
out_unlock:
mnt_drop_write_file(file);
@@ -4668,7 +4654,7 @@
if (ret)
return ret;
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans))
return PTR_ERR(trans);
@@ -4689,7 +4675,7 @@
btrfs_set_super_incompat_flags(super_block, newflags);
spin_unlock(&root->fs_info->super_lock);
- return btrfs_end_transaction(trans, root);
+ return btrfs_commit_transaction(trans, root);
}
long btrfs_ioctl(struct file *file, unsigned int
@@ -4757,8 +4743,6 @@
return btrfs_ioctl_logical_to_ino(root, argp);
case BTRFS_IOC_SPACE_INFO:
return btrfs_ioctl_space_info(root, argp);
- case BTRFS_IOC_GLOBAL_RSV:
- return btrfs_ioctl_global_rsv(root, argp);
case BTRFS_IOC_SYNC: {
int ret;
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index 730dce3..9dde971 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -24,12 +24,12 @@
#include <linux/xattr.h>
#include <linux/posix_acl_xattr.h>
#include <linux/radix-tree.h>
-#include <linux/crc32c.h>
#include <linux/vmalloc.h>
#include <linux/string.h>
#include "send.h"
#include "backref.h"
+#include "hash.h"
#include "locking.h"
#include "disk-io.h"
#include "btrfs_inode.h"
@@ -620,7 +620,7 @@
hdr->len = cpu_to_le32(sctx->send_size - sizeof(*hdr));
hdr->crc = 0;
- crc = crc32c(0, (unsigned char *)sctx->send_buf, sctx->send_size);
+ crc = btrfs_crc32c(0, (unsigned char *)sctx->send_buf, sctx->send_size);
hdr->crc = cpu_to_le32(crc);
ret = write_buf(sctx->send_filp, sctx->send_buf, sctx->send_size,
@@ -1332,6 +1332,16 @@
}
if (cur_clone_root) {
+ if (compressed != BTRFS_COMPRESS_NONE) {
+ /*
+ * Offsets given by iterate_extent_inodes() are relative
+ * to the start of the extent, we need to add logical
+ * offset from the file extent item.
+ * (See why at backref.c:check_extent_in_eb())
+ */
+ cur_clone_root->offset += btrfs_file_extent_offset(eb,
+ fi);
+ }
*found = cur_clone_root;
ret = 0;
} else {
@@ -2774,8 +2784,6 @@
return 0;
}
-#ifdef CONFIG_BTRFS_ASSERT
-
static int del_waiting_dir_move(struct send_ctx *sctx, u64 ino)
{
struct rb_node *n = sctx->waiting_dir_moves.rb_node;
@@ -2796,8 +2804,6 @@
return -ENOENT;
}
-#endif
-
static int add_pending_dir_move(struct send_ctx *sctx, u64 parent_ino)
{
struct rb_node **p = &sctx->pending_dir_moves.rb_node;
@@ -2902,7 +2908,9 @@
}
sctx->send_progress = sctx->cur_ino + 1;
- ASSERT(del_waiting_dir_move(sctx, pm->ino) == 0);
+ ret = del_waiting_dir_move(sctx, pm->ino);
+ ASSERT(ret == 0);
+
ret = get_cur_path(sctx, pm->ino, pm->gen, to_path);
if (ret < 0)
goto out;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index c02f633..d04db81 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -566,7 +566,7 @@
kfree(num);
if (info->max_inline) {
- info->max_inline = max_t(u64,
+ info->max_inline = min_t(u64,
info->max_inline,
root->sectorsize);
}
@@ -855,6 +855,7 @@
struct btrfs_path *path;
struct btrfs_key location;
struct inode *inode;
+ struct dentry *dentry;
u64 dir_id;
int new = 0;
@@ -925,7 +926,13 @@
return dget(sb->s_root);
}
- return d_obtain_alias(inode);
+ dentry = d_obtain_alias(inode);
+ if (!IS_ERR(dentry)) {
+ spin_lock(&dentry->d_lock);
+ dentry->d_flags &= ~DCACHE_DISCONNECTED;
+ spin_unlock(&dentry->d_lock);
+ }
+ return dentry;
}
static int btrfs_fill_super(struct super_block *sb,
@@ -1996,7 +2003,7 @@
btrfs_hash_exit();
}
-module_init(init_btrfs_fs)
+late_initcall(init_btrfs_fs);
module_exit(exit_btrfs_fs)
MODULE_LICENSE("GPL");
diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c
index 782374d..865f4cf 100644
--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -578,8 +578,14 @@
return -ENOMEM;
list_for_each_entry(dev, &fs_devices->devices, dev_list) {
- struct hd_struct *disk = dev->bdev->bd_part;
- struct kobject *disk_kobj = &part_to_dev(disk)->kobj;
+ struct hd_struct *disk;
+ struct kobject *disk_kobj;
+
+ if (!dev->bdev)
+ continue;
+
+ disk = dev->bdev->bd_part;
+ disk_kobj = &part_to_dev(disk)->kobj;
error = sysfs_create_link(fs_info->device_dir_kobj,
disk_kobj, disk_kobj->name);
diff --git a/fs/buffer.c b/fs/buffer.c
index 651dba1..27265a8 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -654,14 +654,16 @@
static void __set_page_dirty(struct page *page,
struct address_space *mapping, int warn)
{
- spin_lock_irq(&mapping->tree_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&mapping->tree_lock, flags);
if (page->mapping) { /* Race with truncate? */
WARN_ON_ONCE(warn && !PageUptodate(page));
account_page_dirtied(page, mapping);
radix_tree_tag_set(&mapping->page_tree,
page_index(page), PAGECACHE_TAG_DIRTY);
}
- spin_unlock_irq(&mapping->tree_lock);
+ spin_unlock_irqrestore(&mapping->tree_lock, flags);
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
}
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 8f9b4f7..c819b0b 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -1043,15 +1043,30 @@
__u32 secdesclen = 0;
struct cifs_ntsd *pntsd = NULL; /* acl obtained from server */
struct cifs_ntsd *pnntsd = NULL; /* modified acl to be sent to server */
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+ struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
+ struct cifs_tcon *tcon;
+
+ if (IS_ERR(tlink))
+ return PTR_ERR(tlink);
+ tcon = tlink_tcon(tlink);
cifs_dbg(NOISY, "set ACL from mode for %s\n", path);
/* Get the security descriptor */
- pntsd = get_cifs_acl(CIFS_SB(inode->i_sb), inode, path, &secdesclen);
+
+ if (tcon->ses->server->ops->get_acl == NULL) {
+ cifs_put_tlink(tlink);
+ return -EOPNOTSUPP;
+ }
+
+ pntsd = tcon->ses->server->ops->get_acl(cifs_sb, inode, path,
+ &secdesclen);
if (IS_ERR(pntsd)) {
rc = PTR_ERR(pntsd);
cifs_dbg(VFS, "%s: error %d getting sec desc\n", __func__, rc);
- goto out;
+ cifs_put_tlink(tlink);
+ return rc;
}
/*
@@ -1064,6 +1079,7 @@
pnntsd = kmalloc(secdesclen, GFP_KERNEL);
if (!pnntsd) {
kfree(pntsd);
+ cifs_put_tlink(tlink);
return -ENOMEM;
}
@@ -1072,14 +1088,18 @@
cifs_dbg(NOISY, "build_sec_desc rc: %d\n", rc);
+ if (tcon->ses->server->ops->set_acl == NULL)
+ rc = -EOPNOTSUPP;
+
if (!rc) {
/* Set the security descriptor */
- rc = set_cifs_acl(pnntsd, secdesclen, inode, path, aclflag);
+ rc = tcon->ses->server->ops->set_acl(pnntsd, secdesclen, inode,
+ path, aclflag);
cifs_dbg(NOISY, "set_cifs_acl rc: %d\n", rc);
}
+ cifs_put_tlink(tlink);
kfree(pnntsd);
kfree(pntsd);
-out:
return rc;
}
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a245d18..86dc28c 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -323,7 +323,8 @@
/* async read from the server */
int (*async_readv)(struct cifs_readdata *);
/* async write to the server */
- int (*async_writev)(struct cifs_writedata *);
+ int (*async_writev)(struct cifs_writedata *,
+ void (*release)(struct kref *));
/* sync read from the server */
int (*sync_read)(const unsigned int, struct cifsFileInfo *,
struct cifs_io_parms *, unsigned int *, char **,
@@ -395,6 +396,10 @@
int (*set_EA)(const unsigned int, struct cifs_tcon *, const char *,
const char *, const void *, const __u16,
const struct nls_table *, int);
+ struct cifs_ntsd * (*get_acl)(struct cifs_sb_info *, struct inode *,
+ const char *, u32 *);
+ int (*set_acl)(struct cifs_ntsd *, __u32, struct inode *, const char *,
+ int);
};
struct smb_version_values {
@@ -1064,7 +1069,7 @@
unsigned int pagesz;
unsigned int tailsz;
unsigned int nr_pages;
- struct page *pages[1];
+ struct page *pages[];
};
/*
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 79e6e9a..d00e09d 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -488,7 +488,8 @@
int cifs_async_readv(struct cifs_readdata *rdata);
int cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid);
-int cifs_async_writev(struct cifs_writedata *wdata);
+int cifs_async_writev(struct cifs_writedata *wdata,
+ void (*release)(struct kref *kref));
void cifs_writev_complete(struct work_struct *work);
struct cifs_writedata *cifs_writedata_alloc(unsigned int nr_pages,
work_func_t complete);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 4d881c3..f3264bd 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1910,7 +1910,7 @@
do {
server = tlink_tcon(wdata->cfile->tlink)->ses->server;
- rc = server->ops->async_writev(wdata);
+ rc = server->ops->async_writev(wdata, cifs_writedata_release);
} while (rc == -EAGAIN);
for (i = 0; i < wdata->nr_pages; i++) {
@@ -1962,15 +1962,9 @@
{
struct cifs_writedata *wdata;
- /* this would overflow */
- if (nr_pages == 0) {
- cifs_dbg(VFS, "%s: called with nr_pages == 0!\n", __func__);
- return NULL;
- }
-
/* writedata + number of page pointers */
wdata = kzalloc(sizeof(*wdata) +
- sizeof(struct page *) * (nr_pages - 1), GFP_NOFS);
+ sizeof(struct page *) * nr_pages, GFP_NOFS);
if (wdata != NULL) {
kref_init(&wdata->refcount);
INIT_LIST_HEAD(&wdata->list);
@@ -2031,7 +2025,8 @@
/* cifs_async_writev - send an async write, and set up mid to handle result */
int
-cifs_async_writev(struct cifs_writedata *wdata)
+cifs_async_writev(struct cifs_writedata *wdata,
+ void (*release)(struct kref *kref))
{
int rc = -EACCES;
WRITE_REQ *smb = NULL;
@@ -2105,7 +2100,7 @@
if (rc == 0)
cifs_stats_inc(&tcon->stats.cifs_stats.num_writes);
else
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount, release);
async_writev_out:
cifs_small_buf_release(smb);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 853d6d1..7555846 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2043,7 +2043,8 @@
}
wdata->pid = wdata->cfile->pid;
server = tlink_tcon(wdata->cfile->tlink)->ses->server;
- rc = server->ops->async_writev(wdata);
+ rc = server->ops->async_writev(wdata,
+ cifs_writedata_release);
} while (wbc->sync_mode == WB_SYNC_ALL && rc == -EAGAIN);
for (i = 0; i < nr_pages; ++i)
@@ -2331,9 +2332,20 @@
}
static void
-cifs_uncached_writev_complete(struct work_struct *work)
+cifs_uncached_writedata_release(struct kref *refcount)
{
int i;
+ struct cifs_writedata *wdata = container_of(refcount,
+ struct cifs_writedata, refcount);
+
+ for (i = 0; i < wdata->nr_pages; i++)
+ put_page(wdata->pages[i]);
+ cifs_writedata_release(refcount);
+}
+
+static void
+cifs_uncached_writev_complete(struct work_struct *work)
+{
struct cifs_writedata *wdata = container_of(work,
struct cifs_writedata, work);
struct inode *inode = wdata->cfile->dentry->d_inode;
@@ -2347,12 +2359,7 @@
complete(&wdata->done);
- if (wdata->result != -EAGAIN) {
- for (i = 0; i < wdata->nr_pages; i++)
- put_page(wdata->pages[i]);
- }
-
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount, cifs_uncached_writedata_release);
}
/* attempt to send write to server, retry on any -EAGAIN errors */
@@ -2370,7 +2377,8 @@
if (rc != 0)
continue;
}
- rc = server->ops->async_writev(wdata);
+ rc = server->ops->async_writev(wdata,
+ cifs_uncached_writedata_release);
} while (rc == -EAGAIN);
return rc;
@@ -2454,7 +2462,8 @@
wdata->tailsz = cur_len - ((nr_pages - 1) * PAGE_SIZE);
rc = cifs_uncached_retry_writev(wdata);
if (rc) {
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount,
+ cifs_uncached_writedata_release);
break;
}
@@ -2496,7 +2505,7 @@
}
}
list_del_init(&wdata->list);
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount, cifs_uncached_writedata_release);
}
if (total_written > 0)
@@ -2559,8 +2568,8 @@
if (rc > 0) {
ssize_t err;
- err = generic_write_sync(file, pos, rc);
- if (err < 0 && rc > 0)
+ err = generic_write_sync(file, iocb->ki_pos - rc, rc);
+ if (err < 0)
rc = err;
}
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 9cb9679..be58b8f 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -527,10 +527,15 @@
return PTR_ERR(tlink);
tcon = tlink_tcon(tlink);
- rc = CIFSSMBQAllEAs(xid, tcon, path, "SETFILEBITS",
- ea_value, 4 /* size of buf */, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (tcon->ses->server->ops->query_all_EAs == NULL) {
+ cifs_put_tlink(tlink);
+ return -EOPNOTSUPP;
+ }
+
+ rc = tcon->ses->server->ops->query_all_EAs(xid, tcon, path,
+ "SETFILEBITS", ea_value, 4 /* size of buf */,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
cifs_put_tlink(tlink);
if (rc < 0)
return (int)rc;
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index 9ac5bfc..bfd66d8 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -1067,6 +1067,14 @@
.query_mf_symlink = cifs_query_mf_symlink,
.create_mf_symlink = cifs_create_mf_symlink,
.is_read_op = cifs_is_read_op,
+#ifdef CONFIG_CIFS_XATTR
+ .query_all_EAs = CIFSSMBQAllEAs,
+ .set_EA = CIFSSMBSetEA,
+#endif /* CIFS_XATTR */
+#ifdef CONFIG_CIFS_ACL
+ .get_acl = get_cifs_acl,
+ .set_acl = set_cifs_acl,
+#endif /* CIFS_ACL */
};
struct smb_version_values smb1_values = {
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 2013234..a3f7a9c 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -1890,7 +1890,8 @@
/* smb2_async_writev - send an async write, and set up mid to handle result */
int
-smb2_async_writev(struct cifs_writedata *wdata)
+smb2_async_writev(struct cifs_writedata *wdata,
+ void (*release)(struct kref *kref))
{
int rc = -EACCES;
struct smb2_write_req *req = NULL;
@@ -1938,7 +1939,7 @@
smb2_writev_callback, wdata, 0);
if (rc) {
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount, release);
cifs_stats_fail_inc(tcon, SMB2_WRITE_HE);
}
diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h
index 93adc64..0ce48db 100644
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -123,7 +123,8 @@
extern int smb2_async_readv(struct cifs_readdata *rdata);
extern int SMB2_read(const unsigned int xid, struct cifs_io_parms *io_parms,
unsigned int *nbytes, char **buf, int *buf_type);
-extern int smb2_async_writev(struct cifs_writedata *wdata);
+extern int smb2_async_writev(struct cifs_writedata *wdata,
+ void (*release)(struct kref *kref));
extern int SMB2_write(const unsigned int xid, struct cifs_io_parms *io_parms,
unsigned int *nbytes, struct kvec *iov, int n_vec);
extern int SMB2_echo(struct TCP_Server_Info *server);
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index 95c43bb..5ac836a 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -176,8 +176,12 @@
rc = -ENOMEM;
} else {
memcpy(pacl, ea_value, value_size);
- rc = set_cifs_acl(pacl, value_size,
- direntry->d_inode, full_path, CIFS_ACL_DACL);
+ if (pTcon->ses->server->ops->set_acl)
+ rc = pTcon->ses->server->ops->set_acl(pacl,
+ value_size, direntry->d_inode,
+ full_path, CIFS_ACL_DACL);
+ else
+ rc = -EOPNOTSUPP;
if (rc == 0) /* force revalidate of the inode */
CIFS_I(direntry->d_inode)->time = 0;
kfree(pacl);
@@ -323,8 +327,11 @@
u32 acllen;
struct cifs_ntsd *pacl;
- pacl = get_cifs_acl(cifs_sb, direntry->d_inode,
- full_path, &acllen);
+ if (pTcon->ses->server->ops->get_acl == NULL)
+ goto get_ea_exit; /* rc already EOPNOTSUPP */
+
+ pacl = pTcon->ses->server->ops->get_acl(cifs_sb,
+ direntry->d_inode, full_path, &acllen);
if (IS_ERR(pacl)) {
rc = PTR_ERR(pacl);
cifs_dbg(VFS, "%s: error %zd getting sec desc\n",
diff --git a/fs/exec.c b/fs/exec.c
index e1529b4..3d78fcc 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -748,11 +748,10 @@
#endif /* CONFIG_MMU */
-struct file *open_exec(const char *name)
+static struct file *do_open_exec(struct filename *name)
{
struct file *file;
int err;
- struct filename tmp = { .name = name };
static const struct open_flags open_exec_flags = {
.open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC,
.acc_mode = MAY_EXEC | MAY_OPEN,
@@ -760,7 +759,7 @@
.lookup_flags = LOOKUP_FOLLOW,
};
- file = do_filp_open(AT_FDCWD, &tmp, &open_exec_flags);
+ file = do_filp_open(AT_FDCWD, name, &open_exec_flags);
if (IS_ERR(file))
goto out;
@@ -784,6 +783,12 @@
fput(file);
return ERR_PTR(err);
}
+
+struct file *open_exec(const char *name)
+{
+ struct filename tmp = { .name = name };
+ return do_open_exec(&tmp);
+}
EXPORT_SYMBOL(open_exec);
int kernel_read(struct file *file, loff_t offset,
@@ -1162,7 +1167,7 @@
return -ENOMEM;
}
-void free_bprm(struct linux_binprm *bprm)
+static void free_bprm(struct linux_binprm *bprm)
{
free_arg_pages(bprm);
if (bprm->cred) {
@@ -1432,7 +1437,7 @@
/*
* sys_execve() executes a new program.
*/
-static int do_execve_common(const char *filename,
+static int do_execve_common(struct filename *filename,
struct user_arg_ptr argv,
struct user_arg_ptr envp)
{
@@ -1441,6 +1446,9 @@
struct files_struct *displaced;
int retval;
+ if (IS_ERR(filename))
+ return PTR_ERR(filename);
+
/*
* We move the actual failure in case of RLIMIT_NPROC excess from
* set*uid() to execve() because too many poorly written programs
@@ -1473,7 +1481,7 @@
check_unsafe_exec(bprm);
current->in_execve = 1;
- file = open_exec(filename);
+ file = do_open_exec(filename);
retval = PTR_ERR(file);
if (IS_ERR(file))
goto out_unmark;
@@ -1481,8 +1489,7 @@
sched_exec();
bprm->file = file;
- bprm->filename = filename;
- bprm->interp = filename;
+ bprm->filename = bprm->interp = filename->name;
retval = bprm_mm_init(bprm);
if (retval)
@@ -1523,6 +1530,7 @@
acct_update_integrals(current);
task_numa_free(current);
free_bprm(bprm);
+ putname(filename);
if (displaced)
put_files_struct(displaced);
return retval;
@@ -1544,10 +1552,11 @@
if (displaced)
reset_files_struct(displaced);
out_ret:
+ putname(filename);
return retval;
}
-int do_execve(const char *filename,
+int do_execve(struct filename *filename,
const char __user *const __user *__argv,
const char __user *const __user *__envp)
{
@@ -1557,7 +1566,7 @@
}
#ifdef CONFIG_COMPAT
-static int compat_do_execve(const char *filename,
+static int compat_do_execve(struct filename *filename,
const compat_uptr_t __user *__argv,
const compat_uptr_t __user *__envp)
{
@@ -1607,25 +1616,13 @@
const char __user *const __user *, argv,
const char __user *const __user *, envp)
{
- struct filename *path = getname(filename);
- int error = PTR_ERR(path);
- if (!IS_ERR(path)) {
- error = do_execve(path->name, argv, envp);
- putname(path);
- }
- return error;
+ return do_execve(getname(filename), argv, envp);
}
#ifdef CONFIG_COMPAT
asmlinkage long compat_sys_execve(const char __user * filename,
const compat_uptr_t __user * argv,
const compat_uptr_t __user * envp)
{
- struct filename *path = getname(filename);
- int error = PTR_ERR(path);
- if (!IS_ERR(path)) {
- error = compat_do_execve(path->name, argv, envp);
- putname(path);
- }
- return error;
+ return compat_do_execve(getname(filename), argv, envp);
}
#endif
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 43e64f6..1a50739 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -152,7 +152,7 @@
if (ret > 0) {
ssize_t err;
- err = generic_write_sync(file, pos, ret);
+ err = generic_write_sync(file, iocb->ki_pos - ret, ret);
if (err < 0 && ret > 0)
ret = err;
}
diff --git a/fs/file.c b/fs/file.c
index 771578b..db25c2b 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -34,7 +34,7 @@
* vmalloc() if the allocation size will be considered "large" by the VM.
*/
if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
- void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN);
+ void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY);
if (data != NULL)
return data;
}
diff --git a/fs/jfs/xattr.c b/fs/jfs/xattr.c
index 3bd5ee4..46325d5 100644
--- a/fs/jfs/xattr.c
+++ b/fs/jfs/xattr.c
@@ -854,9 +854,6 @@
int rc;
tid_t tid;
- if ((rc = can_set_xattr(inode, name, value, value_len)))
- return rc;
-
/*
* If this is a request for a synthetic attribute in the system.*
* namespace use the generic infrastructure to resolve a handler
@@ -865,6 +862,9 @@
if (!strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
return generic_setxattr(dentry, name, value, value_len, flags);
+ if ((rc = can_set_xattr(inode, name, value, value_len)))
+ return rc;
+
if (value == NULL) { /* empty EA, do not remove */
value = "";
value_len = 0;
@@ -1034,9 +1034,6 @@
int rc;
tid_t tid;
- if ((rc = can_set_xattr(inode, name, NULL, 0)))
- return rc;
-
/*
* If this is a request for a synthetic attribute in the system.*
* namespace use the generic infrastructure to resolve a handler
@@ -1045,6 +1042,9 @@
if (!strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
return generic_removexattr(dentry, name);
+ if ((rc = can_set_xattr(inode, name, NULL, 0)))
+ return rc;
+
tid = txBegin(inode->i_sb, 0);
mutex_lock(&ji->commit_mutex);
rc = __jfs_setxattr(tid, dentry->d_inode, name, NULL, 0, XATTR_REPLACE);
@@ -1061,7 +1061,7 @@
* attributes are handled directly.
*/
const struct xattr_handler *jfs_xattr_handlers[] = {
-#ifdef JFS_POSIX_ACL
+#ifdef CONFIG_JFS_POSIX_ACL
&posix_acl_access_xattr_handler,
&posix_acl_default_xattr_handler,
#endif
diff --git a/fs/kernfs/dir.c b/fs/kernfs/dir.c
index 5104cf5..bd6e18b 100644
--- a/fs/kernfs/dir.c
+++ b/fs/kernfs/dir.c
@@ -187,19 +187,23 @@
kn->u.completion = (void *)&wait;
- rwsem_acquire(&kn->dep_map, 0, 0, _RET_IP_);
+ if (kn->flags & KERNFS_LOCKDEP)
+ rwsem_acquire(&kn->dep_map, 0, 0, _RET_IP_);
/* atomic_add_return() is a mb(), put_active() will always see
* the updated kn->u.completion.
*/
v = atomic_add_return(KN_DEACTIVATED_BIAS, &kn->active);
if (v != KN_DEACTIVATED_BIAS) {
- lock_contended(&kn->dep_map, _RET_IP_);
+ if (kn->flags & KERNFS_LOCKDEP)
+ lock_contended(&kn->dep_map, _RET_IP_);
wait_for_completion(&wait);
}
- lock_acquired(&kn->dep_map, _RET_IP_);
- rwsem_release(&kn->dep_map, 1, _RET_IP_);
+ if (kn->flags & KERNFS_LOCKDEP) {
+ lock_acquired(&kn->dep_map, _RET_IP_);
+ rwsem_release(&kn->dep_map, 1, _RET_IP_);
+ }
}
/**
diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c
index e066a39..ab798a88 100644
--- a/fs/lockd/svclock.c
+++ b/fs/lockd/svclock.c
@@ -779,6 +779,7 @@
struct nlm_file *file = block->b_file;
struct nlm_lock *lock = &block->b_call->a_args.lock;
int error;
+ loff_t fl_start, fl_end;
dprintk("lockd: grant blocked lock %p\n", block);
@@ -796,9 +797,16 @@
}
/* Try the lock operation again */
+ /* vfs_lock_file() can mangle fl_start and fl_end, but we need
+ * them unchanged for the GRANT_MSG
+ */
lock->fl.fl_flags |= FL_SLEEP;
+ fl_start = lock->fl.fl_start;
+ fl_end = lock->fl.fl_end;
error = vfs_lock_file(file->f_file, F_SETLK, &lock->fl, NULL);
lock->fl.fl_flags &= ~FL_SLEEP;
+ lock->fl.fl_start = fl_start;
+ lock->fl.fl_end = fl_end;
switch (error) {
case 0:
diff --git a/fs/namei.c b/fs/namei.c
index d580df2..385f781 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -196,6 +196,7 @@
goto error;
result->uptr = filename;
+ result->aname = NULL;
audit_getname(result);
return result;
@@ -210,6 +211,35 @@
return getname_flags(filename, 0, NULL);
}
+/*
+ * The "getname_kernel()" interface doesn't do pathnames longer
+ * than EMBEDDED_NAME_MAX. Deal with it - you're a kernel user.
+ */
+struct filename *
+getname_kernel(const char * filename)
+{
+ struct filename *result;
+ char *kname;
+ int len;
+
+ len = strlen(filename);
+ if (len >= EMBEDDED_NAME_MAX)
+ return ERR_PTR(-ENAMETOOLONG);
+
+ result = __getname();
+ if (unlikely(!result))
+ return ERR_PTR(-ENOMEM);
+
+ kname = (char *)result + sizeof(*result);
+ result->name = kname;
+ result->uptr = NULL;
+ result->aname = NULL;
+ result->separate = false;
+
+ strlcpy(kname, filename, EMBEDDED_NAME_MAX);
+ return result;
+}
+
#ifdef CONFIG_AUDITSYSCALL
void putname(struct filename *name)
{
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index be38b57..4a48fe4 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1846,6 +1846,11 @@
GFP_KERNEL)) {
SetPageUptodate(page);
unlock_page(page);
+ /*
+ * add_to_page_cache_lru() grabs an extra page refcount.
+ * Drop it here to avoid leaking this page later.
+ */
+ page_cache_release(page);
} else
__free_page(page);
diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index 9a5ca03..871d6ed 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -80,7 +80,7 @@
}
if (res.acl_access != NULL) {
- if (posix_acl_equiv_mode(res.acl_access, NULL) ||
+ if ((posix_acl_equiv_mode(res.acl_access, NULL) == 0) ||
res.acl_access->a_count == 0) {
posix_acl_release(res.acl_access);
res.acl_access = NULL;
@@ -113,7 +113,7 @@
return ERR_PTR(status);
}
-int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
+static int __nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
struct posix_acl *dfacl)
{
struct nfs_server *server = NFS_SERVER(inode);
@@ -198,6 +198,15 @@
return status;
}
+int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
+ struct posix_acl *dfacl)
+{
+ int ret;
+ ret = __nfs3_proc_setacls(inode, acl, dfacl);
+ return (ret == -EOPNOTSUPP) ? 0 : ret;
+
+}
+
int nfs3_set_acl(struct inode *inode, struct posix_acl *acl, int type)
{
struct posix_acl *alloc = NULL, *dfacl = NULL;
@@ -225,7 +234,7 @@
if (IS_ERR(alloc))
goto fail;
}
- status = nfs3_proc_setacls(inode, acl, dfacl);
+ status = __nfs3_proc_setacls(inode, acl, dfacl);
posix_acl_release(alloc);
return status;
@@ -233,25 +242,6 @@
return PTR_ERR(alloc);
}
-int nfs3_proc_set_default_acl(struct inode *dir, struct inode *inode,
- umode_t mode)
-{
- struct posix_acl *default_acl, *acl;
- int error;
-
- error = posix_acl_create(dir, &mode, &default_acl, &acl);
- if (error)
- return (error == -EOPNOTSUPP) ? 0 : error;
-
- error = nfs3_proc_setacls(inode, acl, default_acl);
-
- if (acl)
- posix_acl_release(acl);
- if (default_acl)
- posix_acl_release(default_acl);
- return error;
-}
-
const struct xattr_handler *nfs3_xattr_handlers[] = {
&posix_acl_access_xattr_handler,
&posix_acl_default_xattr_handler,
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index dbb3e1f..860ad26 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -170,7 +170,7 @@
void nfs40_shutdown_client(struct nfs_client *clp)
{
if (clp->cl_slot_tbl) {
- nfs4_release_slot_table(clp->cl_slot_tbl);
+ nfs4_shutdown_slot_table(clp->cl_slot_tbl);
kfree(clp->cl_slot_tbl);
}
}
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 42da6af..2da6a69 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1620,15 +1620,15 @@
{
struct nfs4_opendata *data = calldata;
- nfs40_setup_sequence(data->o_arg.server, &data->o_arg.seq_args,
- &data->o_res.seq_res, task);
+ nfs40_setup_sequence(data->o_arg.server, &data->c_arg.seq_args,
+ &data->c_res.seq_res, task);
}
static void nfs4_open_confirm_done(struct rpc_task *task, void *calldata)
{
struct nfs4_opendata *data = calldata;
- nfs40_sequence_done(task, &data->o_res.seq_res);
+ nfs40_sequence_done(task, &data->c_res.seq_res);
data->rpc_status = task->tk_status;
if (data->rpc_status == 0) {
@@ -1686,7 +1686,7 @@
};
int status;
- nfs4_init_sequence(&data->o_arg.seq_args, &data->o_res.seq_res, 1);
+ nfs4_init_sequence(&data->c_arg.seq_args, &data->c_res.seq_res, 1);
kref_get(&data->kref);
data->rpc_done = 0;
data->rpc_status = 0;
diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c
index cf883c7..e799dc3 100644
--- a/fs/nfs/nfs4session.c
+++ b/fs/nfs/nfs4session.c
@@ -231,14 +231,23 @@
return ret;
}
+/*
+ * nfs4_release_slot_table - release all slot table entries
+ */
+static void nfs4_release_slot_table(struct nfs4_slot_table *tbl)
+{
+ nfs4_shrink_slot_table(tbl, 0);
+}
+
/**
- * nfs4_release_slot_table - release resources attached to a slot table
+ * nfs4_shutdown_slot_table - release resources attached to a slot table
* @tbl: slot table to shut down
*
*/
-void nfs4_release_slot_table(struct nfs4_slot_table *tbl)
+void nfs4_shutdown_slot_table(struct nfs4_slot_table *tbl)
{
- nfs4_shrink_slot_table(tbl, 0);
+ nfs4_release_slot_table(tbl);
+ rpc_destroy_wait_queue(&tbl->slot_tbl_waitq);
}
/**
@@ -422,7 +431,7 @@
spin_unlock(&tbl->slot_tbl_lock);
}
-static void nfs4_destroy_session_slot_tables(struct nfs4_session *session)
+static void nfs4_release_session_slot_tables(struct nfs4_session *session)
{
nfs4_release_slot_table(&session->fc_slot_table);
nfs4_release_slot_table(&session->bc_slot_table);
@@ -450,7 +459,7 @@
if (status && tbl->slots == NULL)
/* Fore and back channel share a connection so get
* both slot tables or neither */
- nfs4_destroy_session_slot_tables(ses);
+ nfs4_release_session_slot_tables(ses);
return status;
}
@@ -470,6 +479,12 @@
return session;
}
+static void nfs4_destroy_session_slot_tables(struct nfs4_session *session)
+{
+ nfs4_shutdown_slot_table(&session->fc_slot_table);
+ nfs4_shutdown_slot_table(&session->bc_slot_table);
+}
+
void nfs4_destroy_session(struct nfs4_session *session)
{
struct rpc_xprt *xprt;
diff --git a/fs/nfs/nfs4session.h b/fs/nfs/nfs4session.h
index 2323061..b34ada9 100644
--- a/fs/nfs/nfs4session.h
+++ b/fs/nfs/nfs4session.h
@@ -74,7 +74,7 @@
extern int nfs4_setup_slot_table(struct nfs4_slot_table *tbl,
unsigned int max_reqs, const char *queue);
-extern void nfs4_release_slot_table(struct nfs4_slot_table *tbl);
+extern void nfs4_shutdown_slot_table(struct nfs4_slot_table *tbl);
extern struct nfs4_slot *nfs4_alloc_slot(struct nfs4_slot_table *tbl);
extern void nfs4_free_slot(struct nfs4_slot_table *tbl, struct nfs4_slot *slot);
extern void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl);
diff --git a/fs/nfsd/nfs4acl.c b/fs/nfsd/nfs4acl.c
index d3a5871..d190e33 100644
--- a/fs/nfsd/nfs4acl.c
+++ b/fs/nfsd/nfs4acl.c
@@ -151,17 +151,15 @@
pacl = posix_acl_from_mode(inode->i_mode, GFP_KERNEL);
if (IS_ERR(pacl))
return PTR_ERR(pacl);
- /* allocate for worst case: one (deny, allow) pair each: */
- size += 2 * pacl->a_count;
}
+ /* allocate for worst case: one (deny, allow) pair each: */
+ size += 2 * pacl->a_count;
if (S_ISDIR(inode->i_mode)) {
flags = NFS4_ACL_DIR;
dpacl = get_acl(inode, ACL_TYPE_DEFAULT);
if (dpacl)
size += 2 * dpacl->a_count;
- } else {
- dpacl = NULL;
}
*acl = nfs4_acl_new(size);
@@ -170,8 +168,7 @@
goto out;
}
- if (pacl)
- _posix_to_nfsv4_one(pacl, *acl, flags & ~NFS4_ACL_TYPE_DEFAULT);
+ _posix_to_nfsv4_one(pacl, *acl, flags & ~NFS4_ACL_TYPE_DEFAULT);
if (dpacl)
_posix_to_nfsv4_one(dpacl, *acl, flags | NFS4_ACL_TYPE_DEFAULT);
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index ea4ba9d..db9bd8a 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -2134,7 +2134,7 @@
ret = ntfs_file_aio_write_nolock(iocb, iov, nr_segs, &iocb->ki_pos);
mutex_unlock(&inode->i_mutex);
if (ret > 0) {
- int err = generic_write_sync(file, pos, ret);
+ int err = generic_write_sync(file, iocb->ki_pos - ret, ret);
if (err < 0)
ret = err;
}
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 8750ae1..e2edff3 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -4742,6 +4742,7 @@
enum ocfs2_alloc_restarted *reason_ret)
{
int status = 0, err = 0;
+ int need_free = 0;
int free_extents;
enum ocfs2_alloc_restarted reason = RESTART_NONE;
u32 bit_off, num_bits;
@@ -4796,7 +4797,8 @@
OCFS2_JOURNAL_ACCESS_WRITE);
if (status < 0) {
mlog_errno(status);
- goto leave;
+ need_free = 1;
+ goto bail;
}
block = ocfs2_clusters_to_blocks(osb->sb, bit_off);
@@ -4807,7 +4809,8 @@
num_bits, flags, meta_ac);
if (status < 0) {
mlog_errno(status);
- goto leave;
+ need_free = 1;
+ goto bail;
}
ocfs2_journal_dirty(handle, et->et_root_bh);
@@ -4821,6 +4824,19 @@
reason = RESTART_TRANS;
}
+bail:
+ if (need_free) {
+ if (data_ac->ac_which == OCFS2_AC_USE_LOCAL)
+ ocfs2_free_local_alloc_bits(osb, handle, data_ac,
+ bit_off, num_bits);
+ else
+ ocfs2_free_clusters(handle,
+ data_ac->ac_inode,
+ data_ac->ac_bh,
+ ocfs2_clusters_to_blocks(osb->sb, bit_off),
+ num_bits);
+ }
+
leave:
if (reason_ret)
*reason_ret = reason;
@@ -6805,6 +6821,8 @@
struct buffer_head *di_bh)
{
int ret, i, has_data, num_pages = 0;
+ int need_free = 0;
+ u32 bit_off, num;
handle_t *handle;
u64 uninitialized_var(block);
struct ocfs2_inode_info *oi = OCFS2_I(inode);
@@ -6850,7 +6868,6 @@
}
if (has_data) {
- u32 bit_off, num;
unsigned int page_end;
u64 phys;
@@ -6886,6 +6903,7 @@
ret = ocfs2_grab_eof_pages(inode, 0, end, pages, &num_pages);
if (ret) {
mlog_errno(ret);
+ need_free = 1;
goto out_commit;
}
@@ -6896,6 +6914,7 @@
ret = ocfs2_read_inline_data(inode, pages[0], di_bh);
if (ret) {
mlog_errno(ret);
+ need_free = 1;
goto out_commit;
}
@@ -6927,6 +6946,7 @@
ret = ocfs2_insert_extent(handle, &et, 0, block, 1, 0, NULL);
if (ret) {
mlog_errno(ret);
+ need_free = 1;
goto out_commit;
}
@@ -6938,6 +6958,18 @@
dquot_free_space_nodirty(inode,
ocfs2_clusters_to_bytes(osb->sb, 1));
+ if (need_free) {
+ if (data_ac->ac_which == OCFS2_AC_USE_LOCAL)
+ ocfs2_free_local_alloc_bits(osb, handle, data_ac,
+ bit_off, num);
+ else
+ ocfs2_free_clusters(handle,
+ data_ac->ac_inode,
+ data_ac->ac_bh,
+ ocfs2_clusters_to_blocks(osb->sb, bit_off),
+ num);
+ }
+
ocfs2_commit_trans(osb, handle);
out_unlock:
@@ -7126,7 +7158,7 @@
if (end > i_size_read(inode))
end = i_size_read(inode);
- BUG_ON(start >= end);
+ BUG_ON(start > end);
if (!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) ||
!(le16_to_cpu(di->i_dyn_features) & OCFS2_INLINE_DATA_FL) ||
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index d77d71e..8450262bc 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -185,6 +185,9 @@
file->f_path.dentry->d_name.name,
(unsigned long long)datasync);
+ if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
+ return -EROFS;
+
err = filemap_write_and_wait_range(inode->i_mapping, start, end);
if (err)
return err;
@@ -474,11 +477,6 @@
goto bail;
}
- /* lets handle the simple truncate cases before doing any more
- * cluster locking. */
- if (new_i_size == le64_to_cpu(fe->i_size))
- goto bail;
-
down_write(&OCFS2_I(inode)->ip_alloc_sem);
ocfs2_resv_discard(&osb->osb_la_resmap,
@@ -718,7 +716,8 @@
* While a write will already be ordering the data, a truncate will not.
* Thus, we need to explicitly order the zeroed pages.
*/
-static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
+static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode,
+ struct buffer_head *di_bh)
{
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
handle_t *handle = NULL;
@@ -735,7 +734,14 @@
}
ret = ocfs2_jbd2_file_inode(handle, inode);
- if (ret < 0)
+ if (ret < 0) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), di_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret)
mlog_errno(ret);
out:
@@ -751,7 +757,7 @@
* to be too fragile to do exactly what we need without us having to
* worry about recursive locking in ->write_begin() and ->write_end(). */
static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
- u64 abs_to)
+ u64 abs_to, struct buffer_head *di_bh)
{
struct address_space *mapping = inode->i_mapping;
struct page *page;
@@ -759,6 +765,7 @@
handle_t *handle = NULL;
int ret = 0;
unsigned zero_from, zero_to, block_start, block_end;
+ struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
BUG_ON(abs_from >= abs_to);
BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
@@ -801,7 +808,8 @@
}
if (!handle) {
- handle = ocfs2_zero_start_ordered_transaction(inode);
+ handle = ocfs2_zero_start_ordered_transaction(inode,
+ di_bh);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
handle = NULL;
@@ -818,8 +826,22 @@
ret = 0;
}
- if (handle)
+ if (handle) {
+ /*
+ * fs-writeback will release the dirty pages without page lock
+ * whose offset are over inode size, the release happens at
+ * block_write_full_page_endio().
+ */
+ i_size_write(inode, abs_to);
+ inode->i_blocks = ocfs2_inode_sector_count(inode);
+ di->i_size = cpu_to_le64((u64)i_size_read(inode));
+ inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
+ di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
+ di->i_mtime_nsec = di->i_ctime_nsec;
+ ocfs2_journal_dirty(handle, di_bh);
ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+ }
out_unlock:
unlock_page(page);
@@ -915,7 +937,7 @@
* has made sure that the entire range needs zeroing.
*/
static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
- u64 range_end)
+ u64 range_end, struct buffer_head *di_bh)
{
int rc = 0;
u64 next_pos;
@@ -931,7 +953,7 @@
next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
if (next_pos > range_end)
next_pos = range_end;
- rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
+ rc = ocfs2_write_zero_page(inode, zero_pos, next_pos, di_bh);
if (rc < 0) {
mlog_errno(rc);
break;
@@ -977,7 +999,7 @@
range_end = zero_to_size;
ret = ocfs2_zero_extend_range(inode, range_start,
- range_end);
+ range_end, di_bh);
if (ret) {
mlog_errno(ret);
break;
@@ -1145,14 +1167,14 @@
goto bail_unlock_rw;
}
- if (size_change && attr->ia_size != i_size_read(inode)) {
+ if (size_change) {
status = inode_newsize_ok(inode, attr->ia_size);
if (status)
goto bail_unlock;
inode_dio_wait(inode);
- if (i_size_read(inode) > attr->ia_size) {
+ if (i_size_read(inode) >= attr->ia_size) {
if (ocfs2_should_order_data(inode)) {
status = ocfs2_begin_ordered_truncate(inode,
attr->ia_size);
diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index cd5496b..0440134 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -781,6 +781,48 @@
return status;
}
+int ocfs2_free_local_alloc_bits(struct ocfs2_super *osb,
+ handle_t *handle,
+ struct ocfs2_alloc_context *ac,
+ u32 bit_off,
+ u32 num_bits)
+{
+ int status, start;
+ u32 clear_bits;
+ struct inode *local_alloc_inode;
+ void *bitmap;
+ struct ocfs2_dinode *alloc;
+ struct ocfs2_local_alloc *la;
+
+ BUG_ON(ac->ac_which != OCFS2_AC_USE_LOCAL);
+
+ local_alloc_inode = ac->ac_inode;
+ alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data;
+ la = OCFS2_LOCAL_ALLOC(alloc);
+
+ bitmap = la->la_bitmap;
+ start = bit_off - le32_to_cpu(la->la_bm_off);
+ clear_bits = num_bits;
+
+ status = ocfs2_journal_access_di(handle,
+ INODE_CACHE(local_alloc_inode),
+ osb->local_alloc_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (status < 0) {
+ mlog_errno(status);
+ goto bail;
+ }
+
+ while (clear_bits--)
+ ocfs2_clear_bit(start++, bitmap);
+
+ le32_add_cpu(&alloc->id1.bitmap1.i_used, -num_bits);
+ ocfs2_journal_dirty(handle, osb->local_alloc_bh);
+
+bail:
+ return status;
+}
+
static u32 ocfs2_local_alloc_count_bits(struct ocfs2_dinode *alloc)
{
u32 count;
diff --git a/fs/ocfs2/localalloc.h b/fs/ocfs2/localalloc.h
index 1be9b58..44a7d1f 100644
--- a/fs/ocfs2/localalloc.h
+++ b/fs/ocfs2/localalloc.h
@@ -55,6 +55,12 @@
u32 *bit_off,
u32 *num_bits);
+int ocfs2_free_local_alloc_bits(struct ocfs2_super *osb,
+ handle_t *handle,
+ struct ocfs2_alloc_context *ac,
+ u32 bit_off,
+ u32 num_bits);
+
void ocfs2_local_alloc_seen_free_bits(struct ocfs2_super *osb,
unsigned int num_clusters);
void ocfs2_la_enable_worker(struct work_struct *work);
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index f4d609b..3683643 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -664,6 +664,7 @@
struct ocfs2_super *osb = OCFS2_SB(dir->i_sb);
struct ocfs2_dir_lookup_result lookup = { NULL, };
sigset_t oldset;
+ u64 old_de_ino;
trace_ocfs2_link((unsigned long long)OCFS2_I(inode)->ip_blkno,
old_dentry->d_name.len, old_dentry->d_name.name,
@@ -686,6 +687,22 @@
goto out;
}
+ err = ocfs2_lookup_ino_from_name(dir, old_dentry->d_name.name,
+ old_dentry->d_name.len, &old_de_ino);
+ if (err) {
+ err = -ENOENT;
+ goto out;
+ }
+
+ /*
+ * Check whether another node removed the source inode while we
+ * were in the vfs.
+ */
+ if (old_de_ino != OCFS2_I(inode)->ip_blkno) {
+ err = -ENOENT;
+ goto out;
+ }
+
err = ocfs2_check_dir_for_entry(dir, dentry->d_name.name,
dentry->d_name.len);
if (err)
diff --git a/fs/posix_acl.c b/fs/posix_acl.c
index 38bae5a..11c54fd 100644
--- a/fs/posix_acl.c
+++ b/fs/posix_acl.c
@@ -521,8 +521,11 @@
return -EOPNOTSUPP;
acl = get_acl(inode, ACL_TYPE_ACCESS);
- if (IS_ERR_OR_NULL(acl))
+ if (IS_ERR_OR_NULL(acl)) {
+ if (acl == ERR_PTR(-EOPNOTSUPP))
+ return 0;
return PTR_ERR(acl);
+ }
ret = __posix_acl_chmod(&acl, GFP_KERNEL, mode);
if (ret)
@@ -544,14 +547,15 @@
goto no_acl;
p = get_acl(dir, ACL_TYPE_DEFAULT);
- if (IS_ERR(p))
+ if (IS_ERR(p)) {
+ if (p == ERR_PTR(-EOPNOTSUPP))
+ goto apply_umask;
return PTR_ERR(p);
-
- if (!p) {
- *mode &= ~current_umask();
- goto no_acl;
}
+ if (!p)
+ goto apply_umask;
+
*acl = posix_acl_clone(p, GFP_NOFS);
if (!*acl)
return -ENOMEM;
@@ -575,6 +579,8 @@
}
return 0;
+apply_umask:
+ *mode &= ~current_umask();
no_acl:
*default_acl = NULL;
*acl = NULL;
diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 2ca7ba0..88d4585 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -468,17 +468,24 @@
return rc;
}
nhdr_ptr = notes_section;
- while (real_sz < max_sz) {
- if (nhdr_ptr->n_namesz == 0)
- break;
+ while (nhdr_ptr->n_namesz != 0) {
sz = sizeof(Elf64_Nhdr) +
((nhdr_ptr->n_namesz + 3) & ~3) +
((nhdr_ptr->n_descsz + 3) & ~3);
+ if ((real_sz + sz) > max_sz) {
+ pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
+ nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
+ break;
+ }
real_sz += sz;
nhdr_ptr = (Elf64_Nhdr*)((char*)nhdr_ptr + sz);
}
kfree(notes_section);
phdr_ptr->p_memsz = real_sz;
+ if (real_sz == 0) {
+ pr_warn("Warning: Zero PT_NOTE entries found\n");
+ return -EINVAL;
+ }
}
return 0;
@@ -648,17 +655,24 @@
return rc;
}
nhdr_ptr = notes_section;
- while (real_sz < max_sz) {
- if (nhdr_ptr->n_namesz == 0)
- break;
+ while (nhdr_ptr->n_namesz != 0) {
sz = sizeof(Elf32_Nhdr) +
((nhdr_ptr->n_namesz + 3) & ~3) +
((nhdr_ptr->n_descsz + 3) & ~3);
+ if ((real_sz + sz) > max_sz) {
+ pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
+ nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
+ break;
+ }
real_sz += sz;
nhdr_ptr = (Elf32_Nhdr*)((char*)nhdr_ptr + sz);
}
kfree(notes_section);
phdr_ptr->p_memsz = real_sz;
+ if (real_sz == 0) {
+ pr_warn("Warning: Zero PT_NOTE entries found\n");
+ return -EINVAL;
+ }
}
return 0;
diff --git a/fs/sync.c b/fs/sync.c
index f155374..e8ba024 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -222,23 +222,6 @@
return do_fsync(fd, 1);
}
-/**
- * generic_write_sync - perform syncing after a write if file / inode is sync
- * @file: file to which the write happened
- * @pos: offset where the write started
- * @count: length of the write
- *
- * This is just a simple wrapper about our general syncing function.
- */
-int generic_write_sync(struct file *file, loff_t pos, loff_t count)
-{
- if (!(file->f_flags & O_DSYNC) && !IS_SYNC(file->f_mapping->host))
- return 0;
- return vfs_fsync_range(file, pos, pos + count - 1,
- (file->f_flags & __O_SYNC) ? 0 : 1);
-}
-EXPORT_SYMBOL(generic_write_sync);
-
/*
* sys_sync_file_range() permits finely controlled syncing over a segment of
* a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index 2e7989e..64b48ea 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -799,7 +799,7 @@
XFS_STATS_ADD(xs_write_bytes, ret);
/* Handle various SYNC-type writes */
- err = generic_write_sync(file, pos, ret);
+ err = generic_write_sync(file, iocb->ki_pos - ret, ret);
if (err < 0)
ret = err;
}
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 04086c5..04a7f31 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -199,6 +199,9 @@
#define DRM_INFO(fmt, ...) \
printk(KERN_INFO "[" DRM_NAME "] " fmt, ##__VA_ARGS__)
+#define DRM_INFO_ONCE(fmt, ...) \
+ printk_once(KERN_INFO "[" DRM_NAME "] " fmt, ##__VA_ARGS__)
+
/**
* Debug output.
*
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index eb6c366a..9c2e4f8 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -13,6 +13,7 @@
#define MUX_MODE5 5
#define MUX_MODE6 6
#define MUX_MODE7 7
+#define MUX_MODE8 8
#define PULL_DISABLE (1 << 16)
#define PULL_UP (1 << 17)
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index fd8bf32..b4a745d 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -115,7 +115,6 @@
extern int prepare_bprm_creds(struct linux_binprm *bprm);
extern void install_exec_creds(struct linux_binprm *bprm);
extern void set_binfmt(struct linux_binfmt *new);
-extern void free_bprm(struct linux_binprm *);
extern ssize_t read_code(struct file *, unsigned long, loff_t, size_t);
#endif /* _LINUX_BINFMTS_H */
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 7065452..5a4d39b 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -250,6 +250,17 @@
struct bio_vec bv;
struct bvec_iter iter;
+ /*
+ * We special case discard/write same, because they interpret bi_size
+ * differently:
+ */
+
+ if (bio->bi_rw & REQ_DISCARD)
+ return 1;
+
+ if (bio->bi_rw & REQ_WRITE_SAME)
+ return 1;
+
bio_for_each_segment(bv, bio, iter)
segs++;
@@ -332,6 +343,7 @@
extern struct bio *bio_clone_bioset(struct bio *, gfp_t, struct bio_set *bs);
extern struct bio_set *fs_bio_set;
+unsigned int bio_integrity_tag_size(struct bio *bio);
static inline struct bio *bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs)
{
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index 161b231..18ba8a6 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -83,6 +83,8 @@
*/
rq_timed_out_fn *timeout;
+ softirq_done_fn *complete;
+
/*
* Override for hctx allocations (should probably go)
*/
@@ -119,11 +121,12 @@
void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule);
-void blk_mq_insert_request(struct request_queue *, struct request *, bool);
+void blk_mq_insert_request(struct request_queue *, struct request *,
+ bool, bool);
void blk_mq_run_queues(struct request_queue *q, bool async);
void blk_mq_free_request(struct request *rq);
bool blk_mq_can_queue(struct blk_mq_hw_ctx *);
-struct request *blk_mq_alloc_request(struct request_queue *q, int rw, gfp_t gfp, bool reserved);
+struct request *blk_mq_alloc_request(struct request_queue *q, int rw, gfp_t gfp);
struct request *blk_mq_alloc_reserved_request(struct request_queue *q, int rw, gfp_t gfp);
struct request *blk_mq_rq_from_tag(struct request_queue *q, unsigned int tag);
@@ -133,6 +136,8 @@
void blk_mq_end_io(struct request *rq, int error);
+void blk_mq_complete_request(struct request *rq);
+
void blk_mq_stop_hw_queue(struct blk_mq_hw_ctx *hctx);
void blk_mq_start_hw_queue(struct blk_mq_hw_ctx *hctx);
void blk_mq_stop_hw_queues(struct request_queue *q);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8678c43..4afa4f8 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -98,7 +98,7 @@
struct list_head queuelist;
union {
struct call_single_data csd;
- struct work_struct mq_flush_data;
+ struct work_struct mq_flush_work;
};
struct request_queue *q;
@@ -448,13 +448,8 @@
unsigned long flush_pending_since;
struct list_head flush_queue[2];
struct list_head flush_data_in_flight;
- union {
- struct request flush_rq;
- struct {
- spinlock_t mq_flush_lock;
- struct work_struct mq_flush_work;
- };
- };
+ struct request *flush_rq;
+ spinlock_t mq_flush_lock;
struct mutex sysfs_lock;
diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h
index 2f0543f..f9bbbb4 100644
--- a/include/linux/can/skb.h
+++ b/include/linux/can/skb.h
@@ -11,7 +11,9 @@
#define CAN_SKB_H
#include <linux/types.h>
+#include <linux/skbuff.h>
#include <linux/can.h>
+#include <net/sock.h>
/*
* The struct can_skb_priv is used to transport additional information along
@@ -42,4 +44,40 @@
skb_reserve(skb, sizeof(struct can_skb_priv));
}
+static inline void can_skb_destructor(struct sk_buff *skb)
+{
+ sock_put(skb->sk);
+}
+
+static inline void can_skb_set_owner(struct sk_buff *skb, struct sock *sk)
+{
+ if (sk) {
+ sock_hold(sk);
+ skb->destructor = can_skb_destructor;
+ skb->sk = sk;
+ }
+}
+
+/*
+ * returns an unshared skb owned by the original sock to be echo'ed back
+ */
+static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb)
+{
+ if (skb_shared(skb)) {
+ struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
+
+ if (likely(nskb)) {
+ can_skb_set_owner(nskb, skb->sk);
+ consume_skb(skb);
+ return nskb;
+ } else {
+ kfree_skb(skb);
+ return NULL;
+ }
+ }
+
+ /* we can assume to have an unshared skb with proper owner */
+ return skb;
+}
+
#endif /* CAN_SKB_H */
diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
index ded4299..2507fd2 100644
--- a/include/linux/compiler-gcc4.h
+++ b/include/linux/compiler-gcc4.h
@@ -75,11 +75,7 @@
*
* (asm goto is automatically volatile - the naming reflects this.)
*/
-#if GCC_VERSION <= 40801
-# define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-#else
-# define asm_volatile_goto(x...) do { asm goto(x); } while (0)
-#endif
+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
#if GCC_VERSION >= 40400
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 09f553c..6082956 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2079,6 +2079,7 @@
extern int filp_close(struct file *, fl_owner_t id);
extern struct filename *getname(const char __user *);
+extern struct filename *getname_kernel(const char *);
enum {
FILE_CREATED = 1,
@@ -2273,7 +2274,13 @@
extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end,
int datasync);
extern int vfs_fsync(struct file *file, int datasync);
-extern int generic_write_sync(struct file *file, loff_t pos, loff_t count);
+static inline int generic_write_sync(struct file *file, loff_t pos, loff_t count)
+{
+ if (!(file->f_flags & O_DSYNC) && !IS_SYNC(file->f_mapping->host))
+ return 0;
+ return vfs_fsync_range(file, pos, pos + count - 1,
+ (file->f_flags & __O_SYNC) ? 0 : 1);
+}
extern void emergency_sync(void);
extern void emergency_remount(void);
#ifdef CONFIG_BLOCK
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 4d34dbb..7a8144f 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -4,8 +4,6 @@
#include <linux/err.h>
#include <linux/kernel.h>
-#ifdef CONFIG_GPIOLIB
-
struct device;
struct gpio_chip;
@@ -18,6 +16,8 @@
*/
struct gpio_desc;
+#ifdef CONFIG_GPIOLIB
+
/* Acquire and dispose GPIOs */
struct gpio_desc *__must_check gpiod_get(struct device *dev,
const char *con_id);
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 15da677..344883d 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -875,7 +875,7 @@
struct vmbus_channel_initiate_contact {
struct vmbus_channel_message_header header;
u32 vmbus_version_requested;
- u32 padding2;
+ u32 target_vcpu; /* The VCPU the host should respond to */
u64 interrupt_page;
u64 monitor_page1;
u64 monitor_page2;
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 0053add..a2678d3 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -158,6 +158,11 @@
devname, dev_id);
}
+extern int __must_check
+devm_request_any_context_irq(struct device *dev, unsigned int irq,
+ irq_handler_t handler, unsigned long irqflags,
+ const char *devname, void *dev_id);
+
extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
/*
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index a86ca14..4e7fe74 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -347,7 +347,6 @@
struct mutex lock;
struct mutex irq_lock;
atomic_t transfer_ongoing;
- int irq_base;
int irq;
struct irq_domain *domain;
enum ab8500_version version;
@@ -378,7 +377,6 @@
* @regulator: machine-specific constraints for regulators
*/
struct ab8500_platform_data {
- int irq_base;
void (*init) (struct ab8500 *);
struct ab8500_regulator_platform_data *regulator;
struct ab8500_codec_platform_data *codec;
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index 060e112..bf5109d 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -183,8 +183,6 @@
bool enable_set_ddr_opp;
bool enable_ape_opp_100_voltage;
struct ab8500_platform_data *ab_platdata;
- int ab_irq;
- int irq_base;
u32 version_offset;
u32 legacy_offset;
u32 adt_offset;
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 554548c..130bc8d 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -38,8 +38,10 @@
#include <linux/pci.h>
#include <linux/spinlock_types.h>
#include <linux/semaphore.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/radix-tree.h>
+
#include <linux/mlx5/device.h>
#include <linux/mlx5/doorbell.h>
@@ -227,6 +229,7 @@
* protect uuar allocation data structs
*/
struct mutex lock;
+ u32 ver;
};
struct mlx5_bf {
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 3ccfcec..b2fb167 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -379,12 +379,14 @@
* Arguments to the open_confirm call.
*/
struct nfs_open_confirmargs {
+ struct nfs4_sequence_args seq_args;
const struct nfs_fh * fh;
nfs4_stateid * stateid;
struct nfs_seqid * seqid;
};
struct nfs_open_confirmres {
+ struct nfs4_sequence_res seq_res;
nfs4_stateid stateid;
struct nfs_seqid * seqid;
};
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 26ebcf4..69ae03f 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -80,13 +80,14 @@
struct dma_pool *prp_small_pool;
int instance;
int queue_count;
- int db_stride;
+ u32 db_stride;
u32 ctrl_config;
struct msix_entry *entry;
struct nvme_bar __iomem *bar;
struct list_head namespaces;
struct kref kref;
struct miscdevice miscdev;
+ struct work_struct reset_work;
char name[12];
char serial[20];
char model[40];
@@ -94,6 +95,8 @@
u32 max_hw_sectors;
u32 stripe_size;
u16 oncs;
+ u16 abort_limit;
+ u8 initialized;
};
/*
@@ -165,6 +168,7 @@
struct sg_io_hdr;
int nvme_sg_io(struct nvme_ns *ns, struct sg_io_hdr __user *u_hdr);
+int nvme_sg_io32(struct nvme_ns *ns, unsigned long arg);
int nvme_sg_get_version_num(int __user *ip);
#endif /* _LINUX_NVME_H */
diff --git a/include/linux/of.h b/include/linux/of.h
index 70c64ba..435cb99 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -169,35 +169,15 @@
extern struct device_node *of_find_node_by_name(struct device_node *from,
const char *name);
-#define for_each_node_by_name(dn, name) \
- for (dn = of_find_node_by_name(NULL, name); dn; \
- dn = of_find_node_by_name(dn, name))
extern struct device_node *of_find_node_by_type(struct device_node *from,
const char *type);
-#define for_each_node_by_type(dn, type) \
- for (dn = of_find_node_by_type(NULL, type); dn; \
- dn = of_find_node_by_type(dn, type))
extern struct device_node *of_find_compatible_node(struct device_node *from,
const char *type, const char *compat);
-#define for_each_compatible_node(dn, type, compatible) \
- for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
- dn = of_find_compatible_node(dn, type, compatible))
extern struct device_node *of_find_matching_node_and_match(
struct device_node *from,
const struct of_device_id *matches,
const struct of_device_id **match);
-static inline struct device_node *of_find_matching_node(
- struct device_node *from,
- const struct of_device_id *matches)
-{
- return of_find_matching_node_and_match(from, matches, NULL);
-}
-#define for_each_matching_node(dn, matches) \
- for (dn = of_find_matching_node(NULL, matches); dn; \
- dn = of_find_matching_node(dn, matches))
-#define for_each_matching_node_and_match(dn, matches, match) \
- for (dn = of_find_matching_node_and_match(NULL, matches, match); \
- dn; dn = of_find_matching_node_and_match(dn, matches, match))
+
extern struct device_node *of_find_node_by_path(const char *path);
extern struct device_node *of_find_node_by_phandle(phandle handle);
extern struct device_node *of_get_parent(const struct device_node *node);
@@ -209,43 +189,11 @@
extern struct device_node *of_get_child_by_name(const struct device_node *node,
const char *name);
-#define for_each_child_of_node(parent, child) \
- for (child = of_get_next_child(parent, NULL); child != NULL; \
- child = of_get_next_child(parent, child))
-
-#define for_each_available_child_of_node(parent, child) \
- for (child = of_get_next_available_child(parent, NULL); child != NULL; \
- child = of_get_next_available_child(parent, child))
-
-static inline int of_get_child_count(const struct device_node *np)
-{
- struct device_node *child;
- int num = 0;
-
- for_each_child_of_node(np, child)
- num++;
-
- return num;
-}
-
-static inline int of_get_available_child_count(const struct device_node *np)
-{
- struct device_node *child;
- int num = 0;
-
- for_each_available_child_of_node(np, child)
- num++;
-
- return num;
-}
/* cache lookup */
extern struct device_node *of_find_next_cache_node(const struct device_node *);
extern struct device_node *of_find_node_with_property(
struct device_node *from, const char *prop_name);
-#define for_each_node_with_property(dn, prop_name) \
- for (dn = of_find_node_with_property(NULL, prop_name); dn; \
- dn = of_find_node_with_property(dn, prop_name))
extern struct property *of_find_property(const struct device_node *np,
const char *name,
@@ -367,27 +315,48 @@
return NULL;
}
+static inline struct device_node *of_find_node_by_type(struct device_node *from,
+ const char *type)
+{
+ return NULL;
+}
+
+static inline struct device_node *of_find_matching_node_and_match(
+ struct device_node *from,
+ const struct of_device_id *matches,
+ const struct of_device_id **match)
+{
+ return NULL;
+}
+
static inline struct device_node *of_get_parent(const struct device_node *node)
{
return NULL;
}
+static inline struct device_node *of_get_next_child(
+ const struct device_node *node, struct device_node *prev)
+{
+ return NULL;
+}
+
+static inline struct device_node *of_get_next_available_child(
+ const struct device_node *node, struct device_node *prev)
+{
+ return NULL;
+}
+
+static inline struct device_node *of_find_node_with_property(
+ struct device_node *from, const char *prop_name)
+{
+ return NULL;
+}
+
static inline bool of_have_populated_dt(void)
{
return false;
}
-/* Kill an unused variable warning on a device_node pointer */
-static inline void __of_use_dn(const struct device_node *np)
-{
-}
-
-#define for_each_child_of_node(parent, child) \
- while (__of_use_dn(parent), __of_use_dn(child), 0)
-
-#define for_each_available_child_of_node(parent, child) \
- while (0)
-
static inline struct device_node *of_get_child_by_name(
const struct device_node *node,
const char *name)
@@ -395,16 +364,6 @@
return NULL;
}
-static inline int of_get_child_count(const struct device_node *np)
-{
- return 0;
-}
-
-static inline int of_get_available_child_count(const struct device_node *np)
-{
- return 0;
-}
-
static inline int of_device_is_compatible(const struct device_node *device,
const char *name)
{
@@ -569,6 +528,13 @@
static inline int of_node_to_nid(struct device_node *device) { return 0; }
#endif
+static inline struct device_node *of_find_matching_node(
+ struct device_node *from,
+ const struct of_device_id *matches)
+{
+ return of_find_matching_node_and_match(from, matches, NULL);
+}
+
/**
* of_property_read_bool - Findfrom a property
* @np: device node from which the property value is to be read.
@@ -618,6 +584,55 @@
s; \
s = of_prop_next_string(prop, s))
+#define for_each_node_by_name(dn, name) \
+ for (dn = of_find_node_by_name(NULL, name); dn; \
+ dn = of_find_node_by_name(dn, name))
+#define for_each_node_by_type(dn, type) \
+ for (dn = of_find_node_by_type(NULL, type); dn; \
+ dn = of_find_node_by_type(dn, type))
+#define for_each_compatible_node(dn, type, compatible) \
+ for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
+ dn = of_find_compatible_node(dn, type, compatible))
+#define for_each_matching_node(dn, matches) \
+ for (dn = of_find_matching_node(NULL, matches); dn; \
+ dn = of_find_matching_node(dn, matches))
+#define for_each_matching_node_and_match(dn, matches, match) \
+ for (dn = of_find_matching_node_and_match(NULL, matches, match); \
+ dn; dn = of_find_matching_node_and_match(dn, matches, match))
+
+#define for_each_child_of_node(parent, child) \
+ for (child = of_get_next_child(parent, NULL); child != NULL; \
+ child = of_get_next_child(parent, child))
+#define for_each_available_child_of_node(parent, child) \
+ for (child = of_get_next_available_child(parent, NULL); child != NULL; \
+ child = of_get_next_available_child(parent, child))
+
+#define for_each_node_with_property(dn, prop_name) \
+ for (dn = of_find_node_with_property(NULL, prop_name); dn; \
+ dn = of_find_node_with_property(dn, prop_name))
+
+static inline int of_get_child_count(const struct device_node *np)
+{
+ struct device_node *child;
+ int num = 0;
+
+ for_each_child_of_node(np, child)
+ num++;
+
+ return num;
+}
+
+static inline int of_get_available_child_count(const struct device_node *np)
+{
+ struct device_node *child;
+ int num = 0;
+
+ for_each_available_child_of_node(np, child)
+ num++;
+
+ return num;
+}
+
#if defined(CONFIG_PROC_FS) && defined(CONFIG_PROC_DEVICETREE)
extern void proc_device_tree_add_node(struct device_node *, struct proc_dir_entry *);
extern void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop);
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 8d7dd67..ef37021 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -78,11 +78,13 @@
static inline void of_device_node_put(struct device *dev) { }
-static inline const struct of_device_id *of_match_device(
+static inline const struct of_device_id *__of_match_device(
const struct of_device_id *matches, const struct device *dev)
{
return NULL;
}
+#define of_match_device(matches, dev) \
+ __of_match_device(of_match_ptr(matches), (dev))
static inline struct device_node *of_cpu_device_node_get(int cpu)
{
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index e464b4e..d1fe1a7 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -228,9 +228,9 @@
TESTPAGEFLAG(Writeback, writeback) TESTSCFLAG(Writeback, writeback)
PAGEFLAG(MappedToDisk, mappedtodisk)
-/* PG_readahead is only used for file reads; PG_reclaim is only for writes */
+/* PG_readahead is only used for reads; PG_reclaim is only for writes */
PAGEFLAG(Reclaim, reclaim) TESTCLEARFLAG(Reclaim, reclaim)
-PAGEFLAG(Readahead, reclaim) /* Reminder to do async read-ahead */
+PAGEFLAG(Readahead, reclaim) TESTCLEARFLAG(Readahead, reclaim)
#ifdef CONFIG_HIGHMEM
/*
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e273e5a..3f83459 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -146,7 +146,9 @@
phy->attrs.bus_width = bus_width;
}
struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
struct phy *devm_phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
void phy_put(struct phy *phy);
void devm_phy_put(struct device *dev, struct phy *phy);
struct phy *of_phy_simple_xlate(struct device *dev,
@@ -232,11 +234,23 @@
return ERR_PTR(-ENOSYS);
}
+static inline struct phy *phy_optional_get(struct device *dev,
+ const char *string)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
static inline struct phy *devm_phy_get(struct device *dev, const char *string)
{
return ERR_PTR(-ENOSYS);
}
+static inline struct phy *devm_phy_optional_get(struct device *dev,
+ const char *string)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
static inline void phy_put(struct phy *phy)
{
}
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index cea9f70..e26b0c1 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -84,6 +84,7 @@
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virt. base address, if any */
struct serial_rs485 rs485; /* rs485 settings */
+ int rts_gpio; /* optional RTS GPIO */
};
/* Touchscreen Controller */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 68a0e84..a781dec 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -128,6 +128,7 @@
struct fs_struct;
struct perf_event_context;
struct blk_plug;
+struct filename;
/*
* List of flags we want to share for kernel threads,
@@ -2311,7 +2312,7 @@
extern int allow_signal(int);
extern int disallow_signal(int);
-extern int do_execve(const char *,
+extern int do_execve(struct filename *,
const char __user * const __user *,
const char __user * const __user *);
extern long do_fork(unsigned long, unsigned long, unsigned long, int __user *, int __user *);
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 3834f43..6ae004e 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -188,6 +188,9 @@
*/
extern void arch_disable_smp_support(void);
+extern void arch_enable_nonboot_cpus_begin(void);
+extern void arch_enable_nonboot_cpus_end(void);
+
void smp_setup_processor_id(void);
#endif /* __LINUX_SMP_H */
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a1d4ca2..4203c66 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -273,7 +273,7 @@
* message while queuing transfers that arrive in the meantime. When the
* driver is finished with this message, it must call
* spi_finalize_current_message() so the subsystem can issue the next
- * transfer
+ * message
* @unprepare_transfer_hardware: there are currently no more messages on the
* queue so the subsystem notifies the driver that it may relax the
* hardware by issuing this call
@@ -287,7 +287,10 @@
* - return 1 if the transfer is still in progress. When
* the driver is finished with this transfer it must
* call spi_finalize_current_transfer() so the subsystem
- * can issue the next transfer
+ * can issue the next transfer. Note: transfer_one and
+ * transfer_one_message are mutually exclusive; when both
+ * are set, the generic subsystem does not call your
+ * transfer_one callback.
* @unprepare_message: undo any work done by prepare_message().
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
* number. Any individual value may be -ENOENT for CS lines that
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c716da1..7f6eb85 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1265,8 +1265,6 @@
* @sg: scatter gather buffer list, the buffer size of each element in
* the list (except the last) must be divisible by the endpoint's
* max packet size if no_sg_constraint isn't set in 'struct usb_bus'
- * (FIXME: scatter-gather under xHCI is broken for periodic transfers.
- * Do not use urb->sg for interrupt endpoints for now, only bulk.)
* @num_mapped_sgs: (internal) number of mapped sg entries
* @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h
index c557c6d..3a712e2 100644
--- a/include/linux/vm_event_item.h
+++ b/include/linux/vm_event_item.h
@@ -71,12 +71,14 @@
THP_ZERO_PAGE_ALLOC,
THP_ZERO_PAGE_ALLOC_FAILED,
#endif
+#ifdef CONFIG_DEBUG_TLBFLUSH
#ifdef CONFIG_SMP
NR_TLB_REMOTE_FLUSH, /* cpu tried to flush others' tlbs */
NR_TLB_REMOTE_FLUSH_RECEIVED,/* cpu received ipi for flush */
-#endif
+#endif /* CONFIG_SMP */
NR_TLB_LOCAL_FLUSH_ALL,
NR_TLB_LOCAL_FLUSH_ONE,
+#endif /* CONFIG_DEBUG_TLBFLUSH */
NR_VM_EVENT_ITEMS
};
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index a67b384..67ce70c 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -83,6 +83,14 @@
#define count_vm_numa_events(x, y) do { (void)(y); } while (0)
#endif /* CONFIG_NUMA_BALANCING */
+#ifdef CONFIG_DEBUG_TLBFLUSH
+#define count_vm_tlb_event(x) count_vm_event(x)
+#define count_vm_tlb_events(x, y) count_vm_events(x, y)
+#else
+#define count_vm_tlb_event(x) do {} while (0)
+#define count_vm_tlb_events(x, y) do { (void)(y); } while (0)
+#endif
+
#define __count_zone_vm_events(item, zone, delta) \
__count_vm_events(item##_NORMAL - ZONE_NORMAL + \
zone_idx(zone), delta)
diff --git a/include/net/datalink.h b/include/net/datalink.h
index deb7ca7..93cb18f 100644
--- a/include/net/datalink.h
+++ b/include/net/datalink.h
@@ -15,4 +15,6 @@
struct list_head node;
};
+struct datalink_proto *make_EII_client(void);
+void destroy_EII_client(struct datalink_proto *dl);
#endif
diff --git a/include/net/dn.h b/include/net/dn.h
index ccc1558..913b73d 100644
--- a/include/net/dn.h
+++ b/include/net/dn.h
@@ -200,6 +200,8 @@
}
unsigned int dn_mss_from_pmtu(struct net_device *dev, int mtu);
+void dn_register_sysctl(void);
+void dn_unregister_sysctl(void);
#define DN_MENUVER_ACC 0x01
#define DN_MENUVER_USR 0x02
diff --git a/include/net/dn_route.h b/include/net/dn_route.h
index b409ad6..55df993 100644
--- a/include/net/dn_route.h
+++ b/include/net/dn_route.h
@@ -20,6 +20,8 @@
struct sock *sk, int flags);
int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb);
void dn_rt_cache_flush(int delay);
+int dn_route_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt, struct net_device *orig_dev);
/* Masks for flags field */
#define DN_RT_F_PID 0x07 /* Mask for packet type */
diff --git a/include/net/ethoc.h b/include/net/ethoc.h
index 96f3789..2a2d6bb 100644
--- a/include/net/ethoc.h
+++ b/include/net/ethoc.h
@@ -16,6 +16,7 @@
struct ethoc_platform_data {
u8 hwaddr[IFHWADDRLEN];
s8 phy_id;
+ u32 eth_clkfreq;
};
#endif /* !LINUX_NET_ETHOC_H */
diff --git a/include/net/ipx.h b/include/net/ipx.h
index 9e9e354..0143180 100644
--- a/include/net/ipx.h
+++ b/include/net/ipx.h
@@ -140,6 +140,17 @@
}
void ipxitf_down(struct ipx_interface *intrfc);
+struct ipx_interface *ipxitf_find_using_net(__be32 net);
+int ipxitf_send(struct ipx_interface *intrfc, struct sk_buff *skb, char *node);
+__be16 ipx_cksum(struct ipxhdr *packet, int length);
+int ipxrtr_add_route(__be32 network, struct ipx_interface *intrfc,
+ unsigned char *node);
+void ipxrtr_del_routes(struct ipx_interface *intrfc);
+int ipxrtr_route_packet(struct sock *sk, struct sockaddr_ipx *usipx,
+ struct iovec *iov, size_t len, int noblock);
+int ipxrtr_route_skb(struct sk_buff *skb);
+struct ipx_route *ipxrtr_lookup(__be32 net);
+int ipxrtr_ioctl(unsigned int cmd, void __user *arg);
static __inline__ void ipxitf_put(struct ipx_interface *intrfc)
{
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index da68c9a..991dcd9 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -162,6 +162,14 @@
struct net *get_net_ns_by_pid(pid_t pid);
struct net *get_net_ns_by_fd(int pid);
+#ifdef CONFIG_SYSCTL
+void ipx_register_sysctl(void);
+void ipx_unregister_sysctl(void);
+#else
+#define ipx_register_sysctl()
+#define ipx_unregister_sysctl()
+#endif
+
#ifdef CONFIG_NET_NS
void __put_net(struct net *net);
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 01ea6ee..b2ac624 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -284,6 +284,8 @@
extern unsigned int nf_conntrack_hash_rnd;
void init_nf_conntrack_hash_rnd(void);
+void nf_conntrack_tmpl_insert(struct net *net, struct nf_conn *tmpl);
+
#define NF_CT_STAT_INC(net, count) __this_cpu_inc((net)->ct.stat->count)
#define NF_CT_STAT_INC_ATOMIC(net, count) this_cpu_inc((net)->ct.stat->count)
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index 57c8ff7..e7e14ff 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -252,6 +252,7 @@
* @owner: module reference
* @policy: netlink attribute policy
* @maxattr: highest netlink attribute number
+ * @family: address family for AF-specific types
*/
struct nft_expr_type {
const struct nft_expr_ops *(*select_ops)(const struct nft_ctx *,
@@ -262,6 +263,7 @@
struct module *owner;
const struct nla_policy *policy;
unsigned int maxattr;
+ u8 family;
};
/**
@@ -320,7 +322,6 @@
* struct nft_rule - nf_tables rule
*
* @list: used internally
- * @rcu_head: used internally for rcu
* @handle: rule handle
* @genmask: generation mask
* @dlen: length of expression data
@@ -328,7 +329,6 @@
*/
struct nft_rule {
struct list_head list;
- struct rcu_head rcu_head;
u64 handle:46,
genmask:2,
dlen:16;
@@ -389,7 +389,6 @@
*
* @rules: list of rules in the chain
* @list: used internally
- * @rcu_head: used internally
* @net: net namespace that this chain belongs to
* @table: table that this chain belongs to
* @handle: chain handle
@@ -401,7 +400,6 @@
struct nft_chain {
struct list_head rules;
struct list_head list;
- struct rcu_head rcu_head;
struct net *net;
struct nft_table *table;
u64 handle;
@@ -529,6 +527,9 @@
#define MODULE_ALIAS_NFT_CHAIN(family, name) \
MODULE_ALIAS("nft-chain-" __stringify(family) "-" name)
+#define MODULE_ALIAS_NFT_AF_EXPR(family, name) \
+ MODULE_ALIAS("nft-expr-" __stringify(family) "-" name)
+
#define MODULE_ALIAS_NFT_EXPR(name) \
MODULE_ALIAS("nft-expr-" name)
diff --git a/include/net/netfilter/nft_reject.h b/include/net/netfilter/nft_reject.h
new file mode 100644
index 0000000..36b0da2
--- /dev/null
+++ b/include/net/netfilter/nft_reject.h
@@ -0,0 +1,25 @@
+#ifndef _NFT_REJECT_H_
+#define _NFT_REJECT_H_
+
+struct nft_reject {
+ enum nft_reject_types type:8;
+ u8 icmp_code;
+};
+
+extern const struct nla_policy nft_reject_policy[];
+
+int nft_reject_init(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nlattr * const tb[]);
+
+int nft_reject_dump(struct sk_buff *skb, const struct nft_expr *expr);
+
+void nft_reject_ipv4_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt);
+
+void nft_reject_ipv6_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt);
+
+#endif
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 8d4a1c0..6793f32 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -226,7 +226,8 @@
IB_PORT_CAP_MASK_NOTICE_SUP = 1 << 22,
IB_PORT_BOOT_MGMT_SUP = 1 << 23,
IB_PORT_LINK_LATENCY_SUP = 1 << 24,
- IB_PORT_CLIENT_REG_SUP = 1 << 25
+ IB_PORT_CLIENT_REG_SUP = 1 << 25,
+ IB_PORT_IP_BASED_GIDS = 1 << 26
};
enum ib_port_width {
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index c9c7912..1772fad 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -525,7 +525,6 @@
#define CMD_T_COMPLETE (1 << 2)
#define CMD_T_SENT (1 << 4)
#define CMD_T_STOP (1 << 5)
-#define CMD_T_FAILED (1 << 6)
#define CMD_T_DEV_ACTIVE (1 << 7)
#define CMD_T_REQUEST_STOP (1 << 8)
#define CMD_T_BUSY (1 << 9)
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index 9e9475c..e5bf9a7 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -42,7 +42,6 @@
u32 state,
u64 mperf,
u64 aperf,
- u32 energy,
u32 freq
),
@@ -51,7 +50,6 @@
state,
mperf,
aperf,
- energy,
freq
),
@@ -61,7 +59,6 @@
__field(u32, state)
__field(u64, mperf)
__field(u64, aperf)
- __field(u32, energy)
__field(u32, freq)
),
@@ -72,17 +69,15 @@
__entry->state = state;
__entry->mperf = mperf;
__entry->aperf = aperf;
- __entry->energy = energy;
__entry->freq = freq;
),
- TP_printk("core_busy=%lu scaled=%lu state=%lu mperf=%llu aperf=%llu energy=%lu freq=%lu ",
+ TP_printk("core_busy=%lu scaled=%lu state=%lu mperf=%llu aperf=%llu freq=%lu ",
(unsigned long)__entry->core_busy,
(unsigned long)__entry->scaled_busy,
(unsigned long)__entry->state,
(unsigned long long)__entry->mperf,
(unsigned long long)__entry->aperf,
- (unsigned long)__entry->energy,
(unsigned long)__entry->freq
)
diff --git a/include/uapi/linux/btrfs.h b/include/uapi/linux/btrfs.h
index 1b8a0f4..b4d6909 100644
--- a/include/uapi/linux/btrfs.h
+++ b/include/uapi/linux/btrfs.h
@@ -558,7 +558,6 @@
#define BTRFS_IOC_DEFAULT_SUBVOL _IOW(BTRFS_IOCTL_MAGIC, 19, __u64)
#define BTRFS_IOC_SPACE_INFO _IOWR(BTRFS_IOCTL_MAGIC, 20, \
struct btrfs_ioctl_space_args)
-#define BTRFS_IOC_GLOBAL_RSV _IOR(BTRFS_IOCTL_MAGIC, 20, __u64)
#define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64)
#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h
index 633b93c..e9a1d2d 100644
--- a/include/uapi/linux/in6.h
+++ b/include/uapi/linux/in6.h
@@ -128,22 +128,13 @@
* IPV6 extension headers
*/
#if __UAPI_DEF_IPPROTO_V6
-enum {
- IPPROTO_HOPOPTS = 0, /* IPv6 hop-by-hop options */
-#define IPPROTO_HOPOPTS IPPROTO_HOPOPTS
- IPPROTO_ROUTING = 43, /* IPv6 routing header */
-#define IPPROTO_ROUTING IPPROTO_ROUTING
- IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header */
-#define IPPROTO_FRAGMENT IPPROTO_FRAGMENT
- IPPROTO_ICMPV6 = 58, /* ICMPv6 */
-#define IPPROTO_ICMPV6 IPPROTO_ICMPV6
- IPPROTO_NONE = 59, /* IPv6 no next header */
-#define IPPROTO_NONE IPPROTO_NONE
- IPPROTO_DSTOPTS = 60, /* IPv6 destination options */
-#define IPPROTO_DSTOPTS IPPROTO_DSTOPTS
- IPPROTO_MH = 135, /* IPv6 mobility header */
-#define IPPROTO_MH IPPROTO_MH
-};
+#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */
+#define IPPROTO_ROUTING 43 /* IPv6 routing header */
+#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */
+#define IPPROTO_ICMPV6 58 /* ICMPv6 */
+#define IPPROTO_NONE 59 /* IPv6 no next header */
+#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */
+#define IPPROTO_MH 135 /* IPv6 mobility header */
#endif /* __UAPI_DEF_IPPROTO_V6 */
/*
diff --git a/include/uapi/linux/mic_ioctl.h b/include/uapi/linux/mic_ioctl.h
index 7fabba5..feb0b4c 100644
--- a/include/uapi/linux/mic_ioctl.h
+++ b/include/uapi/linux/mic_ioctl.h
@@ -39,7 +39,7 @@
#else
struct iovec *iov;
#endif
- int iovcnt;
+ __u32 iovcnt;
__u8 vr_idx;
__u8 update_used;
__u32 out_len;
diff --git a/include/uapi/linux/nvme.h b/include/uapi/linux/nvme.h
index 989c04e..e5ab622 100644
--- a/include/uapi/linux/nvme.h
+++ b/include/uapi/linux/nvme.h
@@ -350,6 +350,16 @@
__u32 rsvd11[5];
};
+struct nvme_abort_cmd {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[9];
+ __le16 sqid;
+ __u16 cid;
+ __u32 rsvd11[5];
+};
+
struct nvme_download_firmware {
__u8 opcode;
__u8 flags;
@@ -384,6 +394,7 @@
struct nvme_download_firmware dlfw;
struct nvme_format_cmd format;
struct nvme_dsm_cmd dsm;
+ struct nvme_abort_cmd abort;
};
};
diff --git a/include/uapi/xen/Kbuild b/include/uapi/xen/Kbuild
index 61257cb..5c45962 100644
--- a/include/uapi/xen/Kbuild
+++ b/include/uapi/xen/Kbuild
@@ -1,3 +1,5 @@
# UAPI Header export list
header-y += evtchn.h
+header-y += gntalloc.h
+header-y += gntdev.h
header-y += privcmd.h
diff --git a/include/xen/gntalloc.h b/include/uapi/xen/gntalloc.h
similarity index 100%
rename from include/xen/gntalloc.h
rename to include/uapi/xen/gntalloc.h
diff --git a/include/xen/gntdev.h b/include/uapi/xen/gntdev.h
similarity index 100%
rename from include/xen/gntdev.h
rename to include/uapi/xen/gntdev.h
diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h
index 7ad033d..a5af2a2 100644
--- a/include/xen/grant_table.h
+++ b/include/xen/grant_table.h
@@ -191,15 +191,11 @@
#define gnttab_map_vaddr(map) ((void *)(map.host_virt_addr))
int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
+ struct gnttab_map_grant_ref *kmap_ops,
struct page **pages, unsigned int count);
-int gnttab_map_refs_userspace(struct gnttab_map_grant_ref *map_ops,
- struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count);
int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops,
+ struct gnttab_map_grant_ref *kunmap_ops,
struct page **pages, unsigned int count);
-int gnttab_unmap_refs_userspace(struct gnttab_unmap_grant_ref *unmap_ops,
- struct gnttab_map_grant_ref *kunmap_ops,
- struct page **pages, unsigned int count);
/* Perform a batch of grant map/copy operations. Retry every batch slot
* for which the hypervisor returns GNTST_eagain. This is typically due
diff --git a/include/xen/interface/io/blkif.h b/include/xen/interface/io/blkif.h
index ae665ac..32ec05a 100644
--- a/include/xen/interface/io/blkif.h
+++ b/include/xen/interface/io/blkif.h
@@ -113,13 +113,13 @@
* it's less than the number provided by the backend. The indirect_grefs field
* in blkif_request_indirect should be filled by the frontend with the
* grant references of the pages that are holding the indirect segments.
- * This pages are filled with an array of blkif_request_segment_aligned
- * that hold the information about the segments. The number of indirect
- * pages to use is determined by the maximum number of segments
- * a indirect request contains. Every indirect page can contain a maximum
- * of 512 segments (PAGE_SIZE/sizeof(blkif_request_segment_aligned)),
- * so to calculate the number of indirect pages to use we have to do
- * ceil(indirect_segments/512).
+ * These pages are filled with an array of blkif_request_segment that hold the
+ * information about the segments. The number of indirect pages to use is
+ * determined by the number of segments an indirect request contains. Every
+ * indirect page can contain a maximum of
+ * (PAGE_SIZE / sizeof(struct blkif_request_segment)) segments, so to
+ * calculate the number of indirect pages to use we have to do
+ * ceil(indirect_segments / (PAGE_SIZE / sizeof(struct blkif_request_segment))).
*
* If a backend does not recognize BLKIF_OP_INDIRECT, it should *not*
* create the "feature-max-indirect-segments" node!
@@ -135,13 +135,12 @@
#define BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST 8
-struct blkif_request_segment_aligned {
- grant_ref_t gref; /* reference to I/O buffer frame */
- /* @first_sect: first sector in frame to transfer (inclusive). */
- /* @last_sect: last sector in frame to transfer (inclusive). */
- uint8_t first_sect, last_sect;
- uint16_t _pad; /* padding to make it 8 bytes, so it's cache-aligned */
-} __attribute__((__packed__));
+struct blkif_request_segment {
+ grant_ref_t gref; /* reference to I/O buffer frame */
+ /* @first_sect: first sector in frame to transfer (inclusive). */
+ /* @last_sect: last sector in frame to transfer (inclusive). */
+ uint8_t first_sect, last_sect;
+};
struct blkif_request_rw {
uint8_t nr_segments; /* number of segments */
@@ -151,12 +150,7 @@
#endif
uint64_t id; /* private guest value, echoed in resp */
blkif_sector_t sector_number;/* start sector idx on disk (r/w only) */
- struct blkif_request_segment {
- grant_ref_t gref; /* reference to I/O buffer frame */
- /* @first_sect: first sector in frame to transfer (inclusive). */
- /* @last_sect: last sector in frame to transfer (inclusive). */
- uint8_t first_sect, last_sect;
- } seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+ struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
} __attribute__((__packed__));
struct blkif_request_discard {
diff --git a/include/xen/interface/xencomm.h b/include/xen/interface/xencomm.h
deleted file mode 100644
index ac45e07..0000000
--- a/include/xen/interface/xencomm.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to
- * deal in the Software without restriction, including without limitation the
- * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Copyright (C) IBM Corp. 2006
- */
-
-#ifndef _XEN_XENCOMM_H_
-#define _XEN_XENCOMM_H_
-
-/* A xencomm descriptor is a scatter/gather list containing physical
- * addresses corresponding to a virtually contiguous memory area. The
- * hypervisor translates these physical addresses to machine addresses to copy
- * to and from the virtually contiguous area.
- */
-
-#define XENCOMM_MAGIC 0x58434F4D /* 'XCOM' */
-#define XENCOMM_INVALID (~0UL)
-
-struct xencomm_desc {
- uint32_t magic;
- uint32_t nr_addrs; /* the number of entries in address[] */
- uint64_t address[0];
-};
-
-#endif /* _XEN_XENCOMM_H_ */
diff --git a/include/xen/xencomm.h b/include/xen/xencomm.h
deleted file mode 100644
index e43b039..0000000
--- a/include/xen/xencomm.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) IBM Corp. 2006
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- * Jerone Young <jyoung5@us.ibm.com>
- */
-
-#ifndef _LINUX_XENCOMM_H_
-#define _LINUX_XENCOMM_H_
-
-#include <xen/interface/xencomm.h>
-
-#define XENCOMM_MINI_ADDRS 3
-struct xencomm_mini {
- struct xencomm_desc _desc;
- uint64_t address[XENCOMM_MINI_ADDRS];
-};
-
-/* To avoid additionnal virt to phys conversion, an opaque structure is
- presented. */
-struct xencomm_handle;
-
-extern void xencomm_free(struct xencomm_handle *desc);
-extern struct xencomm_handle *xencomm_map(void *ptr, unsigned long bytes);
-extern struct xencomm_handle *__xencomm_map_no_alloc(void *ptr,
- unsigned long bytes, struct xencomm_mini *xc_area);
-
-#if 0
-#define XENCOMM_MINI_ALIGNED(xc_desc, n) \
- struct xencomm_mini xc_desc ## _base[(n)] \
- __attribute__((__aligned__(sizeof(struct xencomm_mini)))); \
- struct xencomm_mini *xc_desc = &xc_desc ## _base[0];
-#else
-/*
- * gcc bug workaround:
- * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16660
- * gcc doesn't handle properly stack variable with
- * __attribute__((__align__(sizeof(struct xencomm_mini))))
- */
-#define XENCOMM_MINI_ALIGNED(xc_desc, n) \
- unsigned char xc_desc ## _base[((n) + 1 ) * \
- sizeof(struct xencomm_mini)]; \
- struct xencomm_mini *xc_desc = (struct xencomm_mini *) \
- ((unsigned long)xc_desc ## _base + \
- (sizeof(struct xencomm_mini) - \
- ((unsigned long)xc_desc ## _base) % \
- sizeof(struct xencomm_mini)));
-#endif
-#define xencomm_map_no_alloc(ptr, bytes) \
- ({ XENCOMM_MINI_ALIGNED(xc_desc, 1); \
- __xencomm_map_no_alloc(ptr, bytes, xc_desc); })
-
-/* provided by architecture code: */
-extern unsigned long xencomm_vtop(unsigned long vaddr);
-
-static inline void *xencomm_pa(void *ptr)
-{
- return (void *)xencomm_vtop((unsigned long)ptr);
-}
-
-#define xen_guest_handle(hnd) ((hnd).p)
-
-#endif /* _LINUX_XENCOMM_H_ */
diff --git a/init/main.c b/init/main.c
index 2fd9cef..eb03090 100644
--- a/init/main.c
+++ b/init/main.c
@@ -812,7 +812,7 @@
static int run_init_process(const char *init_filename)
{
argv_init[0] = init_filename;
- return do_execve(init_filename,
+ return do_execve(getname_kernel(init_filename),
(const char __user *const __user *)argv_init,
(const char __user *const __user *)envp_init);
}
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 10176cd..7aef2f4 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1719,7 +1719,7 @@
struct audit_context *context = current->audit_context;
BUG_ON(!context);
- if (!context->in_syscall) {
+ if (!name->aname || !context->in_syscall) {
#if AUDIT_DEBUG == 2
printk(KERN_ERR "%s:%d(:%d): final_putname(%p)\n",
__FILE__, __LINE__, context->serial, name);
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 4a1fef0..07cbdfe 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -40,6 +40,7 @@
# Generic configurable interrupt chip implementation
config GENERIC_IRQ_CHIP
bool
+ select IRQ_DOMAIN
# Generic irq_domain hw <--> linux irq number translation
config IRQ_DOMAIN
diff --git a/kernel/irq/devres.c b/kernel/irq/devres.c
index bd8e788..1ef0606 100644
--- a/kernel/irq/devres.c
+++ b/kernel/irq/devres.c
@@ -73,6 +73,51 @@
EXPORT_SYMBOL(devm_request_threaded_irq);
/**
+ * devm_request_any_context_irq - allocate an interrupt line for a managed device
+ * @dev: device to request interrupt for
+ * @irq: Interrupt line to allocate
+ * @handler: Function to be called when the IRQ occurs
+ * @thread_fn: function to be called in a threaded interrupt context. NULL
+ * for devices which handle everything in @handler
+ * @irqflags: Interrupt type flags
+ * @devname: An ascii name for the claiming device
+ * @dev_id: A cookie passed back to the handler function
+ *
+ * Except for the extra @dev argument, this function takes the
+ * same arguments and performs the same function as
+ * request_any_context_irq(). IRQs requested with this function will be
+ * automatically freed on driver detach.
+ *
+ * If an IRQ allocated with this function needs to be freed
+ * separately, devm_free_irq() must be used.
+ */
+int devm_request_any_context_irq(struct device *dev, unsigned int irq,
+ irq_handler_t handler, unsigned long irqflags,
+ const char *devname, void *dev_id)
+{
+ struct irq_devres *dr;
+ int rc;
+
+ dr = devres_alloc(devm_irq_release, sizeof(struct irq_devres),
+ GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+
+ rc = request_any_context_irq(irq, handler, irqflags, devname, dev_id);
+ if (rc) {
+ devres_free(dr);
+ return rc;
+ }
+
+ dr->irq = irq;
+ dr->dev_id = dev_id;
+ devres_add(dev, dr);
+
+ return 0;
+}
+EXPORT_SYMBOL(devm_request_any_context_irq);
+
+/**
* devm_free_irq - free an interrupt
* @dev: device to free interrupt for
* @irq: Interrupt line to free
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 192a302..8ab8e93 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -274,6 +274,7 @@
{
return (irq < NR_IRQS) ? irq_desc + irq : NULL;
}
+EXPORT_SYMBOL(irq_to_desc);
static void free_desc(unsigned int irq)
{
diff --git a/kernel/kmod.c b/kernel/kmod.c
index b086006..6b375af 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -239,7 +239,7 @@
commit_creds(new);
- retval = do_execve(sub_info->path,
+ retval = do_execve(getname_kernel(sub_info->path),
(const char __user *const __user *)sub_info->argv,
(const char __user *const __user *)sub_info->envp);
if (!retval)
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 7a925ba..a6a5bf5 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -51,7 +51,13 @@
* HZ shrinks, so values greater than 8 overflow 32bits when
* HZ=100.
*/
+#if HZ < 34
+#define JIFFIES_SHIFT 6
+#elif HZ < 67
+#define JIFFIES_SHIFT 7
+#else
#define JIFFIES_SHIFT 8
+#endif
static cycle_t jiffies_read(struct clocksource *cs)
{
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 43780ab..98977a5 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -756,6 +756,7 @@
static void tick_broadcast_clear_oneshot(int cpu)
{
cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask);
+ cpumask_clear_cpu(cpu, tick_broadcast_pending_mask);
}
static void tick_broadcast_init_next_event(struct cpumask *mask,
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 294b8a2..fc4da2d 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2397,6 +2397,13 @@
write &= RB_WRITE_MASK;
tail = write - length;
+ /*
+ * If this is the first commit on the page, then it has the same
+ * timestamp as the page itself.
+ */
+ if (!tail)
+ delta = 0;
+
/* See if we shot pass the end of this buffer page */
if (unlikely(write > BUF_PAGE_SIZE))
return rb_move_tail(cpu_buffer, length, tail,
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index dbf94a7..a48abea 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -119,7 +119,7 @@
config DEBUG_INFO
bool "Compile the kernel with debug info"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && !COMPILE_TEST
help
If you say Y here the resulting kernel image will include
debugging info resulting in a larger kernel image.
diff --git a/lib/Makefile b/lib/Makefile
index 126b34f..48140e3 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -45,6 +45,7 @@
obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
+GCOV_PROFILE_hweight.o := n
CFLAGS_hweight.o = $(subst $(quote),,$(CONFIG_ARCH_HWEIGHT_CFLAGS))
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
diff --git a/lib/percpu_ida.c b/lib/percpu_ida.c
index 7be235f..93d145e 100644
--- a/lib/percpu_ida.c
+++ b/lib/percpu_ida.c
@@ -54,9 +54,7 @@
/*
* Try to steal tags from a remote cpu's percpu freelist.
*
- * We first check how many percpu freelists have tags - we don't steal tags
- * unless enough percpu freelists have tags on them that it's possible more than
- * half the total tags could be stuck on remote percpu freelists.
+ * We first check how many percpu freelists have tags
*
* Then we iterate through the cpus until we find some tags - we don't attempt
* to find the "best" cpu to steal from, to keep cacheline bouncing to a
@@ -69,8 +67,7 @@
struct percpu_ida_cpu *remote;
for (cpus_have_tags = cpumask_weight(&pool->cpus_have_tags);
- cpus_have_tags * pool->percpu_max_size > pool->nr_tags / 2;
- cpus_have_tags--) {
+ cpus_have_tags; cpus_have_tags--) {
cpu = cpumask_next(cpu, &pool->cpus_have_tags);
if (cpu >= nr_cpu_ids) {
diff --git a/mm/filemap.c b/mm/filemap.c
index d56d3c1..7a13f6a 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2553,8 +2553,8 @@
if (ret > 0) {
ssize_t err;
- err = generic_write_sync(file, pos, ret);
- if (err < 0 && ret > 0)
+ err = generic_write_sync(file, iocb->ki_pos - ret, ret);
+ if (err < 0)
ret = err;
}
return ret;
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 4f08a2d..2f2f34a 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -945,8 +945,10 @@
* to it. Similarly, page lock is shifted.
*/
if (hpage != p) {
- put_page(hpage);
- get_page(p);
+ if (!(flags & MF_COUNT_INCREASED)) {
+ put_page(hpage);
+ get_page(p);
+ }
lock_page(p);
unlock_page(hpage);
*hpagep = p;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 2d30e2c..7106cb1 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -2173,11 +2173,12 @@
if (!TestSetPageDirty(page)) {
struct address_space *mapping = page_mapping(page);
struct address_space *mapping2;
+ unsigned long flags;
if (!mapping)
return 1;
- spin_lock_irq(&mapping->tree_lock);
+ spin_lock_irqsave(&mapping->tree_lock, flags);
mapping2 = page_mapping(page);
if (mapping2) { /* Race with truncate? */
BUG_ON(mapping2 != mapping);
@@ -2186,7 +2187,7 @@
radix_tree_tag_set(&mapping->page_tree,
page_index(page), PAGECACHE_TAG_DIRTY);
}
- spin_unlock_irq(&mapping->tree_lock);
+ spin_unlock_irqrestore(&mapping->tree_lock, flags);
if (mapping->host) {
/* !PageAnon && !swapper_space */
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
diff --git a/mm/slub.c b/mm/slub.c
index 7e3e045..25f14ad 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1004,21 +1004,19 @@
static void add_full(struct kmem_cache *s,
struct kmem_cache_node *n, struct page *page)
{
- lockdep_assert_held(&n->list_lock);
-
if (!(s->flags & SLAB_STORE_USER))
return;
+ lockdep_assert_held(&n->list_lock);
list_add(&page->lru, &n->full);
}
static void remove_full(struct kmem_cache *s, struct kmem_cache_node *n, struct page *page)
{
- lockdep_assert_held(&n->list_lock);
-
if (!(s->flags & SLAB_STORE_USER))
return;
+ lockdep_assert_held(&n->list_lock);
list_del(&page->lru);
}
@@ -1520,11 +1518,9 @@
/*
* Management of partially allocated slabs.
*/
-static inline void add_partial(struct kmem_cache_node *n,
- struct page *page, int tail)
+static inline void
+__add_partial(struct kmem_cache_node *n, struct page *page, int tail)
{
- lockdep_assert_held(&n->list_lock);
-
n->nr_partial++;
if (tail == DEACTIVATE_TO_TAIL)
list_add_tail(&page->lru, &n->partial);
@@ -1532,13 +1528,25 @@
list_add(&page->lru, &n->partial);
}
+static inline void add_partial(struct kmem_cache_node *n,
+ struct page *page, int tail)
+{
+ lockdep_assert_held(&n->list_lock);
+ __add_partial(n, page, tail);
+}
+
+static inline void
+__remove_partial(struct kmem_cache_node *n, struct page *page)
+{
+ list_del(&page->lru);
+ n->nr_partial--;
+}
+
static inline void remove_partial(struct kmem_cache_node *n,
struct page *page)
{
lockdep_assert_held(&n->list_lock);
-
- list_del(&page->lru);
- n->nr_partial--;
+ __remove_partial(n, page);
}
/*
@@ -2906,12 +2914,10 @@
inc_slabs_node(kmem_cache_node, node, page->objects);
/*
- * the lock is for lockdep's sake, not for any actual
- * race protection
+ * No locks need to be taken here as it has just been
+ * initialized and there is no concurrent access.
*/
- spin_lock(&n->list_lock);
- add_partial(n, page, DEACTIVATE_TO_HEAD);
- spin_unlock(&n->list_lock);
+ __add_partial(n, page, DEACTIVATE_TO_HEAD);
}
static void free_kmem_cache_nodes(struct kmem_cache *s)
@@ -3197,7 +3203,7 @@
list_for_each_entry_safe(page, h, &n->partial, lru) {
if (!page->inuse) {
- remove_partial(n, page);
+ __remove_partial(n, page);
discard_slab(s, page);
} else {
list_slab_objects(s, page,
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 98e85e9..e76ace3 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -63,6 +63,8 @@
return ret;
}
+static atomic_t swapin_readahead_hits = ATOMIC_INIT(4);
+
void show_swap_cache_info(void)
{
printk("%lu pages in swap cache\n", total_swapcache_pages());
@@ -286,8 +288,11 @@
page = find_get_page(swap_address_space(entry), entry.val);
- if (page)
+ if (page) {
INC_CACHE_INFO(find_success);
+ if (TestClearPageReadahead(page))
+ atomic_inc(&swapin_readahead_hits);
+ }
INC_CACHE_INFO(find_total);
return page;
@@ -389,6 +394,50 @@
return found_page;
}
+static unsigned long swapin_nr_pages(unsigned long offset)
+{
+ static unsigned long prev_offset;
+ unsigned int pages, max_pages, last_ra;
+ static atomic_t last_readahead_pages;
+
+ max_pages = 1 << ACCESS_ONCE(page_cluster);
+ if (max_pages <= 1)
+ return 1;
+
+ /*
+ * This heuristic has been found to work well on both sequential and
+ * random loads, swapping to hard disk or to SSD: please don't ask
+ * what the "+ 2" means, it just happens to work well, that's all.
+ */
+ pages = atomic_xchg(&swapin_readahead_hits, 0) + 2;
+ if (pages == 2) {
+ /*
+ * We can have no readahead hits to judge by: but must not get
+ * stuck here forever, so check for an adjacent offset instead
+ * (and don't even bother to check whether swap type is same).
+ */
+ if (offset != prev_offset + 1 && offset != prev_offset - 1)
+ pages = 1;
+ prev_offset = offset;
+ } else {
+ unsigned int roundup = 4;
+ while (roundup < pages)
+ roundup <<= 1;
+ pages = roundup;
+ }
+
+ if (pages > max_pages)
+ pages = max_pages;
+
+ /* Don't shrink readahead too fast */
+ last_ra = atomic_read(&last_readahead_pages) / 2;
+ if (pages < last_ra)
+ pages = last_ra;
+ atomic_set(&last_readahead_pages, pages);
+
+ return pages;
+}
+
/**
* swapin_readahead - swap in pages in hope we need them soon
* @entry: swap entry of this memory
@@ -412,11 +461,16 @@
struct vm_area_struct *vma, unsigned long addr)
{
struct page *page;
- unsigned long offset = swp_offset(entry);
+ unsigned long entry_offset = swp_offset(entry);
+ unsigned long offset = entry_offset;
unsigned long start_offset, end_offset;
- unsigned long mask = (1UL << page_cluster) - 1;
+ unsigned long mask;
struct blk_plug plug;
+ mask = swapin_nr_pages(offset) - 1;
+ if (!mask)
+ goto skip;
+
/* Read a page_cluster sized and aligned cluster around offset. */
start_offset = offset & ~mask;
end_offset = offset | mask;
@@ -430,10 +484,13 @@
gfp_mask, vma, addr);
if (!page)
continue;
+ if (offset != entry_offset)
+ SetPageReadahead(page);
page_cache_release(page);
}
blk_finish_plug(&plug);
lru_add_drain(); /* Push any new pages onto the LRU now */
+skip:
return read_swap_cache_async(entry, gfp_mask, vma, addr);
}
diff --git a/mm/swapfile.c b/mm/swapfile.c
index c6c13b05..4a7f7e6 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1923,7 +1923,6 @@
p->swap_map = NULL;
cluster_info = p->cluster_info;
p->cluster_info = NULL;
- p->flags = 0;
frontswap_map = frontswap_map_get(p);
spin_unlock(&p->lock);
spin_unlock(&swap_lock);
@@ -1949,6 +1948,16 @@
mutex_unlock(&inode->i_mutex);
}
filp_close(swap_file, NULL);
+
+ /*
+ * Clear the SWP_USED flag after all resources are freed so that swapon
+ * can reuse this swap_info in alloc_swap_info() safely. It is ok to
+ * not hold p->lock after we cleared its SWP_WRITEOK.
+ */
+ spin_lock(&swap_lock);
+ p->flags = 0;
+ spin_unlock(&swap_lock);
+
err = 0;
atomic_inc(&proc_poll_event);
wake_up_interruptible(&proc_poll_wait);
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 7249614..def5dd2 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -851,12 +851,14 @@
"thp_zero_page_alloc",
"thp_zero_page_alloc_failed",
#endif
+#ifdef CONFIG_DEBUG_TLBFLUSH
#ifdef CONFIG_SMP
"nr_tlb_remote_flush",
"nr_tlb_remote_flush_received",
-#endif
+#endif /* CONFIG_SMP */
"nr_tlb_local_flush_all",
"nr_tlb_local_flush_one",
+#endif /* CONFIG_DEBUG_TLBFLUSH */
#endif /* CONFIG_VM_EVENTS_COUNTERS */
};
diff --git a/net/9p/client.c b/net/9p/client.c
index a5e4d2d..9186550 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -204,7 +204,7 @@
return ret;
}
-struct p9_fcall *p9_fcall_alloc(int alloc_msize)
+static struct p9_fcall *p9_fcall_alloc(int alloc_msize)
{
struct p9_fcall *fc;
fc = kmalloc(sizeof(struct p9_fcall) + alloc_msize, GFP_NOFS);
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index cd1e1ed..ac2666c 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -340,7 +340,10 @@
int count = nr_pages;
while (nr_pages) {
s = rest_of_page(data);
- pages[index++] = kmap_to_page(data);
+ if (is_vmalloc_addr(data))
+ pages[index++] = vmalloc_to_page(data);
+ else
+ pages[index++] = kmap_to_page(data);
data += s;
nr_pages--;
}
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index e4401a5..63f0455 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -187,8 +187,7 @@
spin_lock_bh(&br->lock);
if (!ether_addr_equal(dev->dev_addr, addr->sa_data)) {
- memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
- br_fdb_change_mac_address(br, addr->sa_data);
+ /* Mac address will be changed in br_stp_change_bridge_id(). */
br_stp_change_bridge_id(br, addr->sa_data);
}
spin_unlock_bh(&br->lock);
@@ -226,37 +225,11 @@
br_netpoll_disable(p);
}
-static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni,
- gfp_t gfp)
-{
- struct net_bridge *br = netdev_priv(dev);
- struct net_bridge_port *p;
- int err = 0;
-
- list_for_each_entry(p, &br->port_list, list) {
- if (!p->dev)
- continue;
- err = br_netpoll_enable(p, gfp);
- if (err)
- goto fail;
- }
-
-out:
- return err;
-
-fail:
- br_netpoll_cleanup(dev);
- goto out;
-}
-
-int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp)
+static int __br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp)
{
struct netpoll *np;
int err;
- if (!p->br->dev->npinfo)
- return 0;
-
np = kzalloc(sizeof(*p->np), gfp);
if (!np)
return -ENOMEM;
@@ -271,6 +244,37 @@
return err;
}
+int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp)
+{
+ if (!p->br->dev->npinfo)
+ return 0;
+
+ return __br_netpoll_enable(p, gfp);
+}
+
+static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni,
+ gfp_t gfp)
+{
+ struct net_bridge *br = netdev_priv(dev);
+ struct net_bridge_port *p;
+ int err = 0;
+
+ list_for_each_entry(p, &br->port_list, list) {
+ if (!p->dev)
+ continue;
+ err = __br_netpoll_enable(p, gfp);
+ if (err)
+ goto fail;
+ }
+
+out:
+ return err;
+
+fail:
+ br_netpoll_cleanup(dev);
+ goto out;
+}
+
void br_netpoll_disable(struct net_bridge_port *p)
{
struct netpoll *np = p->np;
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index c5f5a4a..9203d5a 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -27,6 +27,9 @@
#include "br_private.h"
static struct kmem_cache *br_fdb_cache __read_mostly;
+static struct net_bridge_fdb_entry *fdb_find(struct hlist_head *head,
+ const unsigned char *addr,
+ __u16 vid);
static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
const unsigned char *addr, u16 vid);
static void fdb_notify(struct net_bridge *br,
@@ -89,11 +92,57 @@
call_rcu(&f->rcu, fdb_rcu_free);
}
+/* Delete a local entry if no other port had the same address. */
+static void fdb_delete_local(struct net_bridge *br,
+ const struct net_bridge_port *p,
+ struct net_bridge_fdb_entry *f)
+{
+ const unsigned char *addr = f->addr.addr;
+ u16 vid = f->vlan_id;
+ struct net_bridge_port *op;
+
+ /* Maybe another port has same hw addr? */
+ list_for_each_entry(op, &br->port_list, list) {
+ if (op != p && ether_addr_equal(op->dev->dev_addr, addr) &&
+ (!vid || nbp_vlan_find(op, vid))) {
+ f->dst = op;
+ f->added_by_user = 0;
+ return;
+ }
+ }
+
+ /* Maybe bridge device has same hw addr? */
+ if (p && ether_addr_equal(br->dev->dev_addr, addr) &&
+ (!vid || br_vlan_find(br, vid))) {
+ f->dst = NULL;
+ f->added_by_user = 0;
+ return;
+ }
+
+ fdb_delete(br, f);
+}
+
+void br_fdb_find_delete_local(struct net_bridge *br,
+ const struct net_bridge_port *p,
+ const unsigned char *addr, u16 vid)
+{
+ struct hlist_head *head = &br->hash[br_mac_hash(addr, vid)];
+ struct net_bridge_fdb_entry *f;
+
+ spin_lock_bh(&br->hash_lock);
+ f = fdb_find(head, addr, vid);
+ if (f && f->is_local && !f->added_by_user && f->dst == p)
+ fdb_delete_local(br, p, f);
+ spin_unlock_bh(&br->hash_lock);
+}
+
void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr)
{
struct net_bridge *br = p->br;
- bool no_vlan = (nbp_get_vlan_info(p) == NULL) ? true : false;
+ struct net_port_vlans *pv = nbp_get_vlan_info(p);
+ bool no_vlan = !pv;
int i;
+ u16 vid;
spin_lock_bh(&br->hash_lock);
@@ -104,38 +153,34 @@
struct net_bridge_fdb_entry *f;
f = hlist_entry(h, struct net_bridge_fdb_entry, hlist);
- if (f->dst == p && f->is_local) {
- /* maybe another port has same hw addr? */
- struct net_bridge_port *op;
- u16 vid = f->vlan_id;
- list_for_each_entry(op, &br->port_list, list) {
- if (op != p &&
- ether_addr_equal(op->dev->dev_addr,
- f->addr.addr) &&
- nbp_vlan_find(op, vid)) {
- f->dst = op;
- goto insert;
- }
- }
-
+ if (f->dst == p && f->is_local && !f->added_by_user) {
/* delete old one */
- fdb_delete(br, f);
-insert:
- /* insert new address, may fail if invalid
- * address or dup.
- */
- fdb_insert(br, p, newaddr, vid);
+ fdb_delete_local(br, p, f);
/* if this port has no vlan information
* configured, we can safely be done at
* this point.
*/
if (no_vlan)
- goto done;
+ goto insert;
}
}
}
+insert:
+ /* insert new address, may fail if invalid address or dup. */
+ fdb_insert(br, p, newaddr, 0);
+
+ if (no_vlan)
+ goto done;
+
+ /* Now add entries for every VLAN configured on the port.
+ * This function runs under RTNL so the bitmap will not change
+ * from under us.
+ */
+ for_each_set_bit(vid, pv->vlan_bitmap, VLAN_N_VID)
+ fdb_insert(br, p, newaddr, vid);
+
done:
spin_unlock_bh(&br->hash_lock);
}
@@ -146,10 +191,12 @@
struct net_port_vlans *pv;
u16 vid = 0;
+ spin_lock_bh(&br->hash_lock);
+
/* If old entry was unassociated with any port, then delete it. */
f = __br_fdb_get(br, br->dev->dev_addr, 0);
if (f && f->is_local && !f->dst)
- fdb_delete(br, f);
+ fdb_delete_local(br, NULL, f);
fdb_insert(br, NULL, newaddr, 0);
@@ -159,14 +206,16 @@
*/
pv = br_get_vlan_info(br);
if (!pv)
- return;
+ goto out;
for_each_set_bit_from(vid, pv->vlan_bitmap, VLAN_N_VID) {
f = __br_fdb_get(br, br->dev->dev_addr, vid);
if (f && f->is_local && !f->dst)
- fdb_delete(br, f);
+ fdb_delete_local(br, NULL, f);
fdb_insert(br, NULL, newaddr, vid);
}
+out:
+ spin_unlock_bh(&br->hash_lock);
}
void br_fdb_cleanup(unsigned long _data)
@@ -235,25 +284,11 @@
if (f->is_static && !do_all)
continue;
- /*
- * if multiple ports all have the same device address
- * then when one port is deleted, assign
- * the local entry to other port
- */
- if (f->is_local) {
- struct net_bridge_port *op;
- list_for_each_entry(op, &br->port_list, list) {
- if (op != p &&
- ether_addr_equal(op->dev->dev_addr,
- f->addr.addr)) {
- f->dst = op;
- goto skip_delete;
- }
- }
- }
- fdb_delete(br, f);
- skip_delete: ;
+ if (f->is_local)
+ fdb_delete_local(br, p, f);
+ else
+ fdb_delete(br, f);
}
}
spin_unlock_bh(&br->hash_lock);
@@ -397,6 +432,7 @@
fdb->vlan_id = vid;
fdb->is_local = 0;
fdb->is_static = 0;
+ fdb->added_by_user = 0;
fdb->updated = fdb->used = jiffies;
hlist_add_head_rcu(&fdb->hlist, head);
}
@@ -447,7 +483,7 @@
}
void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source,
- const unsigned char *addr, u16 vid)
+ const unsigned char *addr, u16 vid, bool added_by_user)
{
struct hlist_head *head = &br->hash[br_mac_hash(addr, vid)];
struct net_bridge_fdb_entry *fdb;
@@ -473,13 +509,18 @@
/* fastpath: update of existing entry */
fdb->dst = source;
fdb->updated = jiffies;
+ if (unlikely(added_by_user))
+ fdb->added_by_user = 1;
}
} else {
spin_lock(&br->hash_lock);
if (likely(!fdb_find(head, addr, vid))) {
fdb = fdb_create(head, source, addr, vid);
- if (fdb)
+ if (fdb) {
+ if (unlikely(added_by_user))
+ fdb->added_by_user = 1;
fdb_notify(br, fdb, RTM_NEWNEIGH);
+ }
}
/* else we lose race and someone else inserts
* it first, don't bother updating
@@ -647,6 +688,7 @@
modified = true;
}
+ fdb->added_by_user = 1;
fdb->used = jiffies;
if (modified) {
@@ -664,7 +706,7 @@
if (ndm->ndm_flags & NTF_USE) {
rcu_read_lock();
- br_fdb_update(p->br, p, addr, vid);
+ br_fdb_update(p->br, p, addr, vid, true);
rcu_read_unlock();
} else {
spin_lock_bh(&p->br->hash_lock);
@@ -749,8 +791,7 @@
return err;
}
-int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr,
- u16 vlan)
+static int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, u16 vlan)
{
struct hlist_head *head = &br->hash[br_mac_hash(addr, vlan)];
struct net_bridge_fdb_entry *fdb;
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index cffe1d6..54d207d 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -389,6 +389,9 @@
if (br->dev->needed_headroom < dev->needed_headroom)
br->dev->needed_headroom = dev->needed_headroom;
+ if (br_fdb_insert(br, p, dev->dev_addr, 0))
+ netdev_err(dev, "failed insert local address bridge forwarding table\n");
+
spin_lock_bh(&br->lock);
changed_addr = br_stp_recalculate_bridge_id(br);
@@ -404,9 +407,6 @@
dev_set_mtu(br->dev, br_min_mtu(br));
- if (br_fdb_insert(br, p, dev->dev_addr, 0))
- netdev_err(dev, "failed insert local address bridge forwarding table\n");
-
kobject_uevent(&p->kobj, KOBJ_ADD);
return 0;
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index bf8dc7d..28d5446 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -77,7 +77,7 @@
/* insert into forwarding database after filtering to avoid spoofing */
br = p->br;
if (p->flags & BR_LEARNING)
- br_fdb_update(br, p, eth_hdr(skb)->h_source, vid);
+ br_fdb_update(br, p, eth_hdr(skb)->h_source, vid, false);
if (!is_broadcast_ether_addr(dest) && is_multicast_ether_addr(dest) &&
br_multicast_rcv(br, p, skb, vid))
@@ -148,7 +148,7 @@
br_vlan_get_tag(skb, &vid);
if (p->flags & BR_LEARNING)
- br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid);
+ br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, false);
return 0; /* process further */
}
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index fcd1233..3ba11bc 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -104,6 +104,7 @@
mac_addr addr;
unsigned char is_local;
unsigned char is_static;
+ unsigned char added_by_user;
__u16 vlan_id;
};
@@ -370,6 +371,9 @@
int br_fdb_init(void);
void br_fdb_fini(void);
void br_fdb_flush(struct net_bridge *br);
+void br_fdb_find_delete_local(struct net_bridge *br,
+ const struct net_bridge_port *p,
+ const unsigned char *addr, u16 vid);
void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr);
void br_fdb_change_mac_address(struct net_bridge *br, const u8 *newaddr);
void br_fdb_cleanup(unsigned long arg);
@@ -383,8 +387,7 @@
int br_fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
const unsigned char *addr, u16 vid);
void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source,
- const unsigned char *addr, u16 vid);
-int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, u16 vid);
+ const unsigned char *addr, u16 vid, bool added_by_user);
int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[],
struct net_device *dev, const unsigned char *addr);
@@ -584,6 +587,7 @@
int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags);
int br_vlan_delete(struct net_bridge *br, u16 vid);
void br_vlan_flush(struct net_bridge *br);
+bool br_vlan_find(struct net_bridge *br, u16 vid);
int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val);
int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags);
int nbp_vlan_delete(struct net_bridge_port *port, u16 vid);
@@ -665,6 +669,11 @@
{
}
+static inline bool br_vlan_find(struct net_bridge *br, u16 vid)
+{
+ return false;
+}
+
static inline int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags)
{
return -EOPNOTSUPP;
diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index 656a6f3..189ba1e 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -194,6 +194,8 @@
wasroot = br_is_root_bridge(br);
+ br_fdb_change_mac_address(br, addr);
+
memcpy(oldaddr, br->bridge_id.addr, ETH_ALEN);
memcpy(br->bridge_id.addr, addr, ETH_ALEN);
memcpy(br->dev->dev_addr, addr, ETH_ALEN);
diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c
index 4ca4d0a..8249ca76 100644
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -275,9 +275,7 @@
if (!pv)
return -EINVAL;
- spin_lock_bh(&br->hash_lock);
- fdb_delete_by_addr(br, br->dev->dev_addr, vid);
- spin_unlock_bh(&br->hash_lock);
+ br_fdb_find_delete_local(br, NULL, br->dev->dev_addr, vid);
__vlan_del(pv, vid);
return 0;
@@ -295,6 +293,25 @@
__vlan_flush(pv);
}
+bool br_vlan_find(struct net_bridge *br, u16 vid)
+{
+ struct net_port_vlans *pv;
+ bool found = false;
+
+ rcu_read_lock();
+ pv = rcu_dereference(br->vlan_info);
+
+ if (!pv)
+ goto out;
+
+ if (test_bit(vid, pv->vlan_bitmap))
+ found = true;
+
+out:
+ rcu_read_unlock();
+ return found;
+}
+
int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val)
{
if (!rtnl_trylock())
@@ -359,9 +376,7 @@
if (!pv)
return -EINVAL;
- spin_lock_bh(&port->br->hash_lock);
- fdb_delete_by_addr(port->br, port->dev->dev_addr, vid);
- spin_unlock_bh(&port->br->hash_lock);
+ br_fdb_find_delete_local(port->br, port, port->dev->dev_addr, vid);
return __vlan_del(pv, vid);
}
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index 4dca159..edbca46 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -22,6 +22,7 @@
#include <net/pkt_sched.h>
#include <net/caif/caif_device.h>
#include <net/caif/caif_layer.h>
+#include <net/caif/caif_dev.h>
#include <net/caif/cfpkt.h>
#include <net/caif/cfcnfg.h>
#include <net/caif/cfserl.h>
diff --git a/net/caif/cfsrvl.c b/net/caif/cfsrvl.c
index 353f793..a6e1154 100644
--- a/net/caif/cfsrvl.c
+++ b/net/caif/cfsrvl.c
@@ -15,6 +15,7 @@
#include <net/caif/caif_layer.h>
#include <net/caif/cfsrvl.h>
#include <net/caif/cfpkt.h>
+#include <net/caif/caif_dev.h>
#define SRVL_CTRL_PKT_SIZE 1
#define SRVL_FLOW_OFF 0x81
diff --git a/net/can/af_can.c b/net/can/af_can.c
index d249874..a27f8aa 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -57,6 +57,7 @@
#include <linux/skbuff.h>
#include <linux/can.h>
#include <linux/can/core.h>
+#include <linux/can/skb.h>
#include <linux/ratelimit.h>
#include <net/net_namespace.h>
#include <net/sock.h>
@@ -290,7 +291,7 @@
return -ENOMEM;
}
- newskb->sk = skb->sk;
+ can_skb_set_owner(newskb, skb->sk);
newskb->ip_summed = CHECKSUM_UNNECESSARY;
newskb->pkt_type = PACKET_BROADCAST;
}
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 3fc737b..dcb75c0 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -268,7 +268,7 @@
/* send with loopback */
skb->dev = dev;
- skb->sk = op->sk;
+ can_skb_set_owner(skb, op->sk);
can_send(skb, 1);
/* update statistics */
@@ -1223,7 +1223,7 @@
can_skb_prv(skb)->ifindex = dev->ifindex;
skb->dev = dev;
- skb->sk = sk;
+ can_skb_set_owner(skb, sk);
err = can_send(skb, 1); /* send with loopback */
dev_put(dev);
diff --git a/net/can/raw.c b/net/can/raw.c
index 07d72d8..8be757c 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -715,6 +715,7 @@
skb->dev = dev;
skb->sk = sk;
+ skb->priority = sk->sk_priority;
err = can_send(skb, ro->loopback);
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 0e478a0..30efc5c 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -840,9 +840,13 @@
if (!cursor->bvec_iter.bi_size) {
bio = bio->bi_next;
- cursor->bvec_iter = bio->bi_iter;
+ cursor->bio = bio;
+ if (bio)
+ cursor->bvec_iter = bio->bi_iter;
+ else
+ memset(&cursor->bvec_iter, 0,
+ sizeof(cursor->bvec_iter));
}
- cursor->bio = bio;
if (!cursor->last_piece) {
BUG_ON(!cursor->resid);
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 010ff3b..0676f2b 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1427,6 +1427,40 @@
}
/*
+ * Caller should hold map_sem for read and request_mutex.
+ */
+static int __ceph_osdc_start_request(struct ceph_osd_client *osdc,
+ struct ceph_osd_request *req,
+ bool nofail)
+{
+ int rc;
+
+ __register_request(osdc, req);
+ req->r_sent = 0;
+ req->r_got_reply = 0;
+ rc = __map_request(osdc, req, 0);
+ if (rc < 0) {
+ if (nofail) {
+ dout("osdc_start_request failed map, "
+ " will retry %lld\n", req->r_tid);
+ rc = 0;
+ } else {
+ __unregister_request(osdc, req);
+ }
+ return rc;
+ }
+
+ if (req->r_osd == NULL) {
+ dout("send_request %p no up osds in pg\n", req);
+ ceph_monc_request_next_osdmap(&osdc->client->monc);
+ } else {
+ __send_queued(osdc);
+ }
+
+ return 0;
+}
+
+/*
* Timeout callback, called every N seconds when 1 or more osd
* requests has been active for more than N seconds. When this
* happens, we ping all OSDs with requests who have timed out to
@@ -1653,6 +1687,7 @@
osdmap_epoch = ceph_decode_32(&p);
/* lookup */
+ down_read(&osdc->map_sem);
mutex_lock(&osdc->request_mutex);
req = __lookup_request(osdc, tid);
if (req == NULL) {
@@ -1709,7 +1744,6 @@
dout("redirect pool %lld\n", redir.oloc.pool);
__unregister_request(osdc, req);
- mutex_unlock(&osdc->request_mutex);
req->r_target_oloc = redir.oloc; /* struct */
@@ -1721,10 +1755,10 @@
* successfully. In the future we might want to follow
* original request's nofail setting here.
*/
- err = ceph_osdc_start_request(osdc, req, true);
+ err = __ceph_osdc_start_request(osdc, req, true);
BUG_ON(err);
- goto done;
+ goto out_unlock;
}
already_completed = req->r_got_reply;
@@ -1742,8 +1776,7 @@
req->r_got_reply = 1;
} else if ((flags & CEPH_OSD_FLAG_ONDISK) == 0) {
dout("handle_reply tid %llu dup ack\n", tid);
- mutex_unlock(&osdc->request_mutex);
- goto done;
+ goto out_unlock;
}
dout("handle_reply tid %llu flags %d\n", tid, flags);
@@ -1758,6 +1791,7 @@
__unregister_request(osdc, req);
mutex_unlock(&osdc->request_mutex);
+ up_read(&osdc->map_sem);
if (!already_completed) {
if (req->r_unsafe_callback &&
@@ -1775,10 +1809,14 @@
complete_request(req);
}
-done:
+out:
dout("req=%p req->r_linger=%d\n", req, req->r_linger);
ceph_osdc_put_request(req);
return;
+out_unlock:
+ mutex_unlock(&osdc->request_mutex);
+ up_read(&osdc->map_sem);
+ goto out;
bad_put:
req->r_result = -EIO;
@@ -1791,6 +1829,7 @@
ceph_osdc_put_request(req);
bad_mutex:
mutex_unlock(&osdc->request_mutex);
+ up_read(&osdc->map_sem);
bad:
pr_err("corrupt osd_op_reply got %d %d\n",
(int)msg->front.iov_len, le32_to_cpu(msg->hdr.front_len));
@@ -2351,34 +2390,16 @@
struct ceph_osd_request *req,
bool nofail)
{
- int rc = 0;
+ int rc;
down_read(&osdc->map_sem);
mutex_lock(&osdc->request_mutex);
- __register_request(osdc, req);
- req->r_sent = 0;
- req->r_got_reply = 0;
- rc = __map_request(osdc, req, 0);
- if (rc < 0) {
- if (nofail) {
- dout("osdc_start_request failed map, "
- " will retry %lld\n", req->r_tid);
- rc = 0;
- } else {
- __unregister_request(osdc, req);
- }
- goto out_unlock;
- }
- if (req->r_osd == NULL) {
- dout("send_request %p no up osds in pg\n", req);
- ceph_monc_request_next_osdmap(&osdc->client->monc);
- } else {
- __send_queued(osdc);
- }
- rc = 0;
-out_unlock:
+
+ rc = __ceph_osdc_start_request(osdc, req, nofail);
+
mutex_unlock(&osdc->request_mutex);
up_read(&osdc->map_sem);
+
return rc;
}
EXPORT_SYMBOL(ceph_osdc_start_request);
@@ -2504,9 +2525,12 @@
err = -ENOMEM;
osdc->notify_wq = create_singlethread_workqueue("ceph-watch-notify");
if (!osdc->notify_wq)
- goto out_msgpool;
+ goto out_msgpool_reply;
+
return 0;
+out_msgpool_reply:
+ ceph_msgpool_destroy(&osdc->msgpool_op_reply);
out_msgpool:
ceph_msgpool_destroy(&osdc->msgpool_op);
out_mempool:
diff --git a/net/core/dev.c b/net/core/dev.c
index 3721db7..4ad1b78 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2803,7 +2803,7 @@
* the BH enable code must have IRQs enabled so that it will not deadlock.
* --BLG
*/
-int __dev_queue_xmit(struct sk_buff *skb, void *accel_priv)
+static int __dev_queue_xmit(struct sk_buff *skb, void *accel_priv)
{
struct net_device *dev = skb->dev;
struct netdev_queue *txq;
@@ -4637,7 +4637,7 @@
}
EXPORT_SYMBOL(netdev_master_upper_dev_get_rcu);
-int netdev_adjacent_sysfs_add(struct net_device *dev,
+static int netdev_adjacent_sysfs_add(struct net_device *dev,
struct net_device *adj_dev,
struct list_head *dev_list)
{
@@ -4647,7 +4647,7 @@
return sysfs_create_link(&(dev->dev.kobj), &(adj_dev->dev.kobj),
linkname);
}
-void netdev_adjacent_sysfs_del(struct net_device *dev,
+static void netdev_adjacent_sysfs_del(struct net_device *dev,
char *name,
struct list_head *dev_list)
{
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index f409e0b..185c341 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -745,6 +745,13 @@
attach_rules(&ops->rules_list, dev);
break;
+ case NETDEV_CHANGENAME:
+ list_for_each_entry(ops, &net->rules_ops, list) {
+ detach_rules(&ops->rules_list, dev);
+ attach_rules(&ops->rules_list, dev);
+ }
+ break;
+
case NETDEV_UNREGISTER:
list_for_each_entry(ops, &net->rules_ops, list)
detach_rules(&ops->rules_list, dev);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index c03f3de..a664f78 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -948,6 +948,7 @@
{
char *cur=opt, *delim;
int ipv6;
+ bool ipversion_set = false;
if (*cur != '@') {
if ((delim = strchr(cur, '@')) == NULL)
@@ -960,6 +961,7 @@
cur++;
if (*cur != '/') {
+ ipversion_set = true;
if ((delim = strchr(cur, '/')) == NULL)
goto parse_failed;
*delim = 0;
@@ -1002,7 +1004,7 @@
ipv6 = netpoll_parse_ip_addr(cur, &np->remote_ip);
if (ipv6 < 0)
goto parse_failed;
- else if (np->ipv6 != (bool)ipv6)
+ else if (ipversion_set && np->ipv6 != (bool)ipv6)
goto parse_failed;
else
np->ipv6 = (bool)ipv6;
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 393b1bc..048dc8d 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -374,7 +374,7 @@
if (!master_dev)
return 0;
ops = master_dev->rtnl_link_ops;
- if (!ops->get_slave_size)
+ if (!ops || !ops->get_slave_size)
return 0;
/* IFLA_INFO_SLAVE_DATA + nested data */
return nla_total_size(sizeof(struct nlattr)) +
diff --git a/net/core/sock.c b/net/core/sock.c
index 0c127dc..5b6a943 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1775,7 +1775,9 @@
while (order) {
if (npages >= 1 << order) {
page = alloc_pages(sk->sk_allocation |
- __GFP_COMP | __GFP_NOWARN,
+ __GFP_COMP |
+ __GFP_NOWARN |
+ __GFP_NORETRY,
order);
if (page)
goto fill_page;
@@ -1845,7 +1847,7 @@
gfp_t gfp = prio;
if (order)
- gfp |= __GFP_COMP | __GFP_NOWARN;
+ gfp |= __GFP_COMP | __GFP_NOWARN | __GFP_NORETRY;
pfrag->page = alloc_pages(gfp, order);
if (likely(pfrag->page)) {
pfrag->offset = 0;
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 2954dcb..4c04848 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -2104,8 +2104,6 @@
.notifier_call = dn_device_event,
};
-extern int dn_route_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *);
-
static struct packet_type dn_dix_packet_type __read_mostly = {
.type = cpu_to_be16(ETH_P_DNA_RT),
.func = dn_route_rcv,
@@ -2353,9 +2351,6 @@
.sendpage = sock_no_sendpage,
};
-void dn_register_sysctl(void);
-void dn_unregister_sysctl(void);
-
MODULE_DESCRIPTION("The Linux DECnet Network Protocol");
MODULE_AUTHOR("Linux DECnet Project Team");
MODULE_LICENSE("GPL");
diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c
index 48b25c0..8edfea5 100644
--- a/net/ieee802154/6lowpan.c
+++ b/net/ieee802154/6lowpan.c
@@ -106,7 +106,6 @@
unsigned short type, const void *_daddr,
const void *_saddr, unsigned int len)
{
- struct ipv6hdr *hdr;
const u8 *saddr = _saddr;
const u8 *daddr = _daddr;
struct ieee802154_addr sa, da;
@@ -117,8 +116,6 @@
if (type != ETH_P_IPV6)
return 0;
- hdr = ipv6_hdr(skb);
-
if (!saddr)
saddr = dev->dev_addr;
@@ -533,7 +530,27 @@
.create = lowpan_header_create,
};
+static struct lock_class_key lowpan_tx_busylock;
+static struct lock_class_key lowpan_netdev_xmit_lock_key;
+
+static void lowpan_set_lockdep_class_one(struct net_device *dev,
+ struct netdev_queue *txq,
+ void *_unused)
+{
+ lockdep_set_class(&txq->_xmit_lock,
+ &lowpan_netdev_xmit_lock_key);
+}
+
+
+static int lowpan_dev_init(struct net_device *dev)
+{
+ netdev_for_each_tx_queue(dev, lowpan_set_lockdep_class_one, NULL);
+ dev->qdisc_tx_busylock = &lowpan_tx_busylock;
+ return 0;
+}
+
static const struct net_device_ops lowpan_netdev_ops = {
+ .ndo_init = lowpan_dev_init,
.ndo_start_xmit = lowpan_xmit,
.ndo_set_mac_address = lowpan_set_address,
};
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index ac2dff3..bdbf68b 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1443,7 +1443,8 @@
+ nla_total_size(4) /* IFA_LOCAL */
+ nla_total_size(4) /* IFA_BROADCAST */
+ nla_total_size(IFNAMSIZ) /* IFA_LABEL */
- + nla_total_size(4); /* IFA_FLAGS */
+ + nla_total_size(4) /* IFA_FLAGS */
+ + nla_total_size(sizeof(struct ifa_cacheinfo)); /* IFA_CACHEINFO */
}
static inline u32 cstamp_delta(unsigned long cstamp)
diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index bd28f38..50228be 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -101,28 +101,22 @@
__tunnel_dst_set(per_cpu_ptr(t->dst_cache, i), NULL);
}
-static struct dst_entry *tunnel_dst_get(struct ip_tunnel *t)
+static struct rtable *tunnel_rtable_get(struct ip_tunnel *t, u32 cookie)
{
struct dst_entry *dst;
rcu_read_lock();
dst = rcu_dereference(this_cpu_ptr(t->dst_cache)->dst);
- if (dst)
+ if (dst) {
+ if (dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
+ rcu_read_unlock();
+ tunnel_dst_reset(t);
+ return NULL;
+ }
dst_hold(dst);
- rcu_read_unlock();
- return dst;
-}
-
-static struct dst_entry *tunnel_dst_check(struct ip_tunnel *t, u32 cookie)
-{
- struct dst_entry *dst = tunnel_dst_get(t);
-
- if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
- tunnel_dst_reset(t);
- return NULL;
}
-
- return dst;
+ rcu_read_unlock();
+ return (struct rtable *)dst;
}
/* Often modified stats are per cpu, other are shared (netdev->stats) */
@@ -584,7 +578,7 @@
struct flowi4 fl4;
u8 tos, ttl;
__be16 df;
- struct rtable *rt = NULL; /* Route to the other host */
+ struct rtable *rt; /* Route to the other host */
unsigned int max_headroom; /* The extra header space needed */
__be32 dst;
int err;
@@ -657,8 +651,7 @@
init_tunnel_flow(&fl4, protocol, dst, tnl_params->saddr,
tunnel->parms.o_key, RT_TOS(tos), tunnel->parms.link);
- if (connected)
- rt = (struct rtable *)tunnel_dst_check(tunnel, 0);
+ rt = connected ? tunnel_rtable_get(tunnel, 0) : NULL;
if (!rt) {
rt = ip_route_output_key(tunnel->net, &fl4);
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index 81c6910..a26ce03 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -61,6 +61,11 @@
packet transformations such as the source, destination address and
source and destination ports.
+config NFT_REJECT_IPV4
+ depends on NF_TABLES_IPV4
+ default NFT_REJECT
+ tristate
+
config NF_TABLES_ARP
depends on NF_TABLES
tristate "ARP nf_tables support"
diff --git a/net/ipv4/netfilter/Makefile b/net/ipv4/netfilter/Makefile
index c16be9d..90b8240 100644
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -30,6 +30,7 @@
obj-$(CONFIG_NF_TABLES_IPV4) += nf_tables_ipv4.o
obj-$(CONFIG_NFT_CHAIN_ROUTE_IPV4) += nft_chain_route_ipv4.o
obj-$(CONFIG_NFT_CHAIN_NAT_IPV4) += nft_chain_nat_ipv4.o
+obj-$(CONFIG_NFT_REJECT_IPV4) += nft_reject_ipv4.o
obj-$(CONFIG_NF_TABLES_ARP) += nf_tables_arp.o
# generic IP tables
diff --git a/net/ipv4/netfilter/nf_nat_h323.c b/net/ipv4/netfilter/nf_nat_h323.c
index 9eea059d..574f7eb 100644
--- a/net/ipv4/netfilter/nf_nat_h323.c
+++ b/net/ipv4/netfilter/nf_nat_h323.c
@@ -229,7 +229,10 @@
ret = nf_ct_expect_related(rtcp_exp);
if (ret == 0)
break;
- else if (ret != -EBUSY) {
+ else if (ret == -EBUSY) {
+ nf_ct_unexpect_related(rtp_exp);
+ continue;
+ } else if (ret < 0) {
nf_ct_unexpect_related(rtp_exp);
nated_port = 0;
break;
diff --git a/net/ipv4/netfilter/nft_reject_ipv4.c b/net/ipv4/netfilter/nft_reject_ipv4.c
new file mode 100644
index 0000000..e79718a
--- /dev/null
+++ b/net/ipv4/netfilter/nft_reject_ipv4.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2008-2009 Patrick McHardy <kaber@trash.net>
+ * Copyright (c) 2013 Eric Leblond <eric@regit.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Development of this code funded by Astaro AG (http://www.astaro.com/)
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/netlink.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/nf_tables.h>
+#include <net/netfilter/nf_tables.h>
+#include <net/icmp.h>
+#include <net/netfilter/ipv4/nf_reject.h>
+#include <net/netfilter/nft_reject.h>
+
+void nft_reject_ipv4_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt)
+{
+ struct nft_reject *priv = nft_expr_priv(expr);
+
+ switch (priv->type) {
+ case NFT_REJECT_ICMP_UNREACH:
+ nf_send_unreach(pkt->skb, priv->icmp_code);
+ break;
+ case NFT_REJECT_TCP_RST:
+ nf_send_reset(pkt->skb, pkt->ops->hooknum);
+ break;
+ }
+
+ data[NFT_REG_VERDICT].verdict = NF_DROP;
+}
+EXPORT_SYMBOL_GPL(nft_reject_ipv4_eval);
+
+static struct nft_expr_type nft_reject_ipv4_type;
+static const struct nft_expr_ops nft_reject_ipv4_ops = {
+ .type = &nft_reject_ipv4_type,
+ .size = NFT_EXPR_SIZE(sizeof(struct nft_reject)),
+ .eval = nft_reject_ipv4_eval,
+ .init = nft_reject_init,
+ .dump = nft_reject_dump,
+};
+
+static struct nft_expr_type nft_reject_ipv4_type __read_mostly = {
+ .family = NFPROTO_IPV4,
+ .name = "reject",
+ .ops = &nft_reject_ipv4_ops,
+ .policy = nft_reject_policy,
+ .maxattr = NFTA_REJECT_MAX,
+ .owner = THIS_MODULE,
+};
+
+static int __init nft_reject_ipv4_module_init(void)
+{
+ return nft_register_expr(&nft_reject_ipv4_type);
+}
+
+static void __exit nft_reject_ipv4_module_exit(void)
+{
+ nft_unregister_expr(&nft_reject_ipv4_type);
+}
+
+module_init(nft_reject_ipv4_module_init);
+module_exit(nft_reject_ipv4_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick McHardy <kaber@trash.net>");
+MODULE_ALIAS_NFT_AF_EXPR(AF_INET, "reject");
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 4475b3b..9f3a2db 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2229,7 +2229,7 @@
/* This is a (useful) BSD violating of the RFC. There is a
* problem with TCP as specified in that the other end could
* keep a socket open forever with no application left this end.
- * We use a 3 minute timeout (about the same as BSD) then kill
+ * We use a 1 minute timeout (about the same as BSD) then kill
* our end. If they send after that then tough - BUT: long enough
* that we won't make the old 4*rto = almost no time - whoops
* reset mistake.
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 65cf90e..227cba7 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -671,6 +671,7 @@
{
struct tcp_sock *tp = tcp_sk(sk);
long m = mrtt; /* RTT */
+ u32 srtt = tp->srtt;
/* The following amusing code comes from Jacobson's
* article in SIGCOMM '88. Note that rtt and mdev
@@ -688,11 +689,9 @@
* does not matter how to _calculate_ it. Seems, it was trap
* that VJ failed to avoid. 8)
*/
- if (m == 0)
- m = 1;
- if (tp->srtt != 0) {
- m -= (tp->srtt >> 3); /* m is now error in rtt est */
- tp->srtt += m; /* rtt = 7/8 rtt + 1/8 new */
+ if (srtt != 0) {
+ m -= (srtt >> 3); /* m is now error in rtt est */
+ srtt += m; /* rtt = 7/8 rtt + 1/8 new */
if (m < 0) {
m = -m; /* m is now abs(error) */
m -= (tp->mdev >> 2); /* similar update on mdev */
@@ -723,11 +722,12 @@
}
} else {
/* no previous measure. */
- tp->srtt = m << 3; /* take the measured time to be rtt */
+ srtt = m << 3; /* take the measured time to be rtt */
tp->mdev = m << 1; /* make sure rto = 3*rtt */
tp->mdev_max = tp->rttvar = max(tp->mdev, tcp_rto_min(sk));
tp->rtt_seq = tp->snd_nxt;
}
+ tp->srtt = max(1U, srtt);
}
/* Set the sk_pacing_rate to allow proper sizing of TSO packets.
@@ -746,8 +746,10 @@
rate *= max(tp->snd_cwnd, tp->packets_out);
- /* Correction for small srtt : minimum srtt being 8 (1 jiffy << 3),
- * be conservative and assume srtt = 1 (125 us instead of 1.25 ms)
+ /* Correction for small srtt and scheduling constraints.
+ * For small rtt, consider noise is too high, and use
+ * the minimal value (srtt = 1 -> 125 us for HZ=1000)
+ *
* We probably need usec resolution in the future.
* Note: This also takes care of possible srtt=0 case,
* when tcp_rtt_estimator() was not yet called.
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 03d26b8..3be1672 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -698,7 +698,8 @@
if ((1 << sk->sk_state) &
(TCPF_ESTABLISHED | TCPF_FIN_WAIT1 | TCPF_CLOSING |
TCPF_CLOSE_WAIT | TCPF_LAST_ACK))
- tcp_write_xmit(sk, tcp_current_mss(sk), 0, 0, GFP_ATOMIC);
+ tcp_write_xmit(sk, tcp_current_mss(sk), tcp_sk(sk)->nonagle,
+ 0, GFP_ATOMIC);
}
/*
* One tasklet per cpu tries to send more skbs.
@@ -1904,7 +1905,15 @@
if (atomic_read(&sk->sk_wmem_alloc) > limit) {
set_bit(TSQ_THROTTLED, &tp->tsq_flags);
- break;
+ /* It is possible TX completion already happened
+ * before we set TSQ_THROTTLED, so we must
+ * test again the condition.
+ * We abuse smp_mb__after_clear_bit() because
+ * there is no smp_mb__after_set_bit() yet
+ */
+ smp_mb__after_clear_bit();
+ if (atomic_read(&sk->sk_wmem_alloc) > limit)
+ break;
}
limit = mss_now;
@@ -1977,7 +1986,7 @@
/* Schedule a loss probe in 2*RTT for SACK capable connections
* in Open state, that are either limited by cwnd or application.
*/
- if (sysctl_tcp_early_retrans < 3 || !rtt || !tp->packets_out ||
+ if (sysctl_tcp_early_retrans < 3 || !tp->srtt || !tp->packets_out ||
!tcp_is_sack(tp) || inet_csk(sk)->icsk_ca_state != TCP_CA_Open)
return false;
diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
index 25f5cee..88b4023 100644
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -17,6 +17,8 @@
static DEFINE_SPINLOCK(udp_offload_lock);
static struct udp_offload_priv __rcu *udp_offload_base __read_mostly;
+#define udp_deref_protected(X) rcu_dereference_protected(X, lockdep_is_held(&udp_offload_lock))
+
struct udp_offload_priv {
struct udp_offload *offload;
struct rcu_head rcu;
@@ -100,8 +102,7 @@
int udp_add_offload(struct udp_offload *uo)
{
- struct udp_offload_priv __rcu **head = &udp_offload_base;
- struct udp_offload_priv *new_offload = kzalloc(sizeof(*new_offload), GFP_KERNEL);
+ struct udp_offload_priv *new_offload = kzalloc(sizeof(*new_offload), GFP_ATOMIC);
if (!new_offload)
return -ENOMEM;
@@ -109,8 +110,8 @@
new_offload->offload = uo;
spin_lock(&udp_offload_lock);
- rcu_assign_pointer(new_offload->next, rcu_dereference(*head));
- rcu_assign_pointer(*head, new_offload);
+ new_offload->next = udp_offload_base;
+ rcu_assign_pointer(udp_offload_base, new_offload);
spin_unlock(&udp_offload_lock);
return 0;
@@ -130,12 +131,12 @@
spin_lock(&udp_offload_lock);
- uo_priv = rcu_dereference(*head);
+ uo_priv = udp_deref_protected(*head);
for (; uo_priv != NULL;
- uo_priv = rcu_dereference(*head)) {
-
+ uo_priv = udp_deref_protected(*head)) {
if (uo_priv->offload == uo) {
- rcu_assign_pointer(*head, rcu_dereference(uo_priv->next));
+ rcu_assign_pointer(*head,
+ udp_deref_protected(uo_priv->next));
goto unlock;
}
head = &uo_priv->next;
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index f81f596..f2610e1 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -414,7 +414,7 @@
addr_type = ipv6_addr_type(&hdr->daddr);
if (ipv6_chk_addr(net, &hdr->daddr, skb->dev, 0) ||
- ipv6_anycast_destination(skb))
+ ipv6_chk_acast_addr_src(net, skb->dev, &hdr->daddr))
saddr = &hdr->daddr;
/*
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index 35750df..4bff1f2 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -50,6 +50,11 @@
packet transformations such as the source, destination address and
source and destination ports.
+config NFT_REJECT_IPV6
+ depends on NF_TABLES_IPV6
+ default NFT_REJECT
+ tristate
+
config IP6_NF_IPTABLES
tristate "IP6 tables support (required for filtering)"
depends on INET && IPV6
diff --git a/net/ipv6/netfilter/Makefile b/net/ipv6/netfilter/Makefile
index d1b4928..70d3dd6 100644
--- a/net/ipv6/netfilter/Makefile
+++ b/net/ipv6/netfilter/Makefile
@@ -27,6 +27,7 @@
obj-$(CONFIG_NF_TABLES_IPV6) += nf_tables_ipv6.o
obj-$(CONFIG_NFT_CHAIN_ROUTE_IPV6) += nft_chain_route_ipv6.o
obj-$(CONFIG_NFT_CHAIN_NAT_IPV6) += nft_chain_nat_ipv6.o
+obj-$(CONFIG_NFT_REJECT_IPV6) += nft_reject_ipv6.o
# matches
obj-$(CONFIG_IP6_NF_MATCH_AH) += ip6t_ah.o
diff --git a/net/ipv6/netfilter/nft_reject_ipv6.c b/net/ipv6/netfilter/nft_reject_ipv6.c
new file mode 100644
index 0000000..0bc19fa
--- /dev/null
+++ b/net/ipv6/netfilter/nft_reject_ipv6.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2008-2009 Patrick McHardy <kaber@trash.net>
+ * Copyright (c) 2013 Eric Leblond <eric@regit.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Development of this code funded by Astaro AG (http://www.astaro.com/)
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/netlink.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/nf_tables.h>
+#include <net/netfilter/nf_tables.h>
+#include <net/netfilter/nft_reject.h>
+#include <net/netfilter/ipv6/nf_reject.h>
+
+void nft_reject_ipv6_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt)
+{
+ struct nft_reject *priv = nft_expr_priv(expr);
+ struct net *net = dev_net((pkt->in != NULL) ? pkt->in : pkt->out);
+
+ switch (priv->type) {
+ case NFT_REJECT_ICMP_UNREACH:
+ nf_send_unreach6(net, pkt->skb, priv->icmp_code,
+ pkt->ops->hooknum);
+ break;
+ case NFT_REJECT_TCP_RST:
+ nf_send_reset6(net, pkt->skb, pkt->ops->hooknum);
+ break;
+ }
+
+ data[NFT_REG_VERDICT].verdict = NF_DROP;
+}
+EXPORT_SYMBOL_GPL(nft_reject_ipv6_eval);
+
+static struct nft_expr_type nft_reject_ipv6_type;
+static const struct nft_expr_ops nft_reject_ipv6_ops = {
+ .type = &nft_reject_ipv6_type,
+ .size = NFT_EXPR_SIZE(sizeof(struct nft_reject)),
+ .eval = nft_reject_ipv6_eval,
+ .init = nft_reject_init,
+ .dump = nft_reject_dump,
+};
+
+static struct nft_expr_type nft_reject_ipv6_type __read_mostly = {
+ .family = NFPROTO_IPV6,
+ .name = "reject",
+ .ops = &nft_reject_ipv6_ops,
+ .policy = nft_reject_policy,
+ .maxattr = NFTA_REJECT_MAX,
+ .owner = THIS_MODULE,
+};
+
+static int __init nft_reject_ipv6_module_init(void)
+{
+ return nft_register_expr(&nft_reject_ipv6_type);
+}
+
+static void __exit nft_reject_ipv6_module_exit(void)
+{
+ nft_unregister_expr(&nft_reject_ipv6_type);
+}
+
+module_init(nft_reject_ipv6_module_init);
+module_exit(nft_reject_ipv6_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick McHardy <kaber@trash.net>");
+MODULE_ALIAS_NFT_AF_EXPR(AF_INET6, "reject");
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 994e28b..00b2a6d 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -52,18 +52,12 @@
#include <net/p8022.h>
#include <net/psnap.h>
#include <net/sock.h>
+#include <net/datalink.h>
#include <net/tcp_states.h>
+#include <net/net_namespace.h>
#include <asm/uaccess.h>
-#ifdef CONFIG_SYSCTL
-extern void ipx_register_sysctl(void);
-extern void ipx_unregister_sysctl(void);
-#else
-#define ipx_register_sysctl()
-#define ipx_unregister_sysctl()
-#endif
-
/* Configuration Variables */
static unsigned char ipxcfg_max_hops = 16;
static char ipxcfg_auto_select_primary;
@@ -84,15 +78,6 @@
struct ipx_interface *ipx_primary_net;
struct ipx_interface *ipx_internal_net;
-extern int ipxrtr_add_route(__be32 network, struct ipx_interface *intrfc,
- unsigned char *node);
-extern void ipxrtr_del_routes(struct ipx_interface *intrfc);
-extern int ipxrtr_route_packet(struct sock *sk, struct sockaddr_ipx *usipx,
- struct iovec *iov, size_t len, int noblock);
-extern int ipxrtr_route_skb(struct sk_buff *skb);
-extern struct ipx_route *ipxrtr_lookup(__be32 net);
-extern int ipxrtr_ioctl(unsigned int cmd, void __user *arg);
-
struct ipx_interface *ipx_interfaces_head(void)
{
struct ipx_interface *rc = NULL;
@@ -1986,9 +1971,6 @@
.notifier_call = ipxitf_device_event,
};
-extern struct datalink_proto *make_EII_client(void);
-extern void destroy_EII_client(struct datalink_proto *);
-
static const unsigned char ipx_8022_type = 0xE0;
static const unsigned char ipx_snap_id[5] = { 0x0, 0x0, 0x0, 0x81, 0x37 };
static const char ipx_EII_err_msg[] __initconst =
diff --git a/net/ipx/ipx_route.c b/net/ipx/ipx_route.c
index 30f4519..c1f0318 100644
--- a/net/ipx/ipx_route.c
+++ b/net/ipx/ipx_route.c
@@ -20,15 +20,11 @@
extern struct ipx_interface *ipx_internal_net;
-extern __be16 ipx_cksum(struct ipxhdr *packet, int length);
extern struct ipx_interface *ipxitf_find_using_net(__be32 net);
extern int ipxitf_demux_socket(struct ipx_interface *intrfc,
struct sk_buff *skb, int copy);
extern int ipxitf_demux_socket(struct ipx_interface *intrfc,
struct sk_buff *skb, int copy);
-extern int ipxitf_send(struct ipx_interface *intrfc, struct sk_buff *skb,
- char *node);
-extern struct ipx_interface *ipxitf_find_using_net(__be32 net);
struct ipx_route *ipxrtr_lookup(__be32 net)
{
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index f9ae9b8..453e974 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1021,8 +1021,10 @@
IEEE80211_P2P_OPPPS_ENABLE_BIT;
err = ieee80211_assign_beacon(sdata, ¶ms->beacon);
- if (err < 0)
+ if (err < 0) {
+ ieee80211_vif_release_channel(sdata);
return err;
+ }
changed |= err;
err = drv_start_ap(sdata->local, sdata);
@@ -1032,6 +1034,7 @@
if (old)
kfree_rcu(old, rcu_head);
RCU_INIT_POINTER(sdata->u.ap.beacon, NULL);
+ ieee80211_vif_release_channel(sdata);
return err;
}
@@ -1090,8 +1093,6 @@
kfree(sdata->u.ap.next_beacon);
sdata->u.ap.next_beacon = NULL;
- cancel_work_sync(&sdata->u.ap.request_smps_work);
-
/* turn off carrier for this interface and dependent VLANs */
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
netif_carrier_off(vlan->dev);
@@ -1103,6 +1104,7 @@
kfree_rcu(old_beacon, rcu_head);
if (old_probe_resp)
kfree_rcu(old_probe_resp, rcu_head);
+ sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
__sta_info_flush(sdata, true);
ieee80211_free_keys(sdata, true);
@@ -2638,6 +2640,24 @@
INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work);
INIT_LIST_HEAD(&roc->dependents);
+ /*
+ * cookie is either the roc cookie (for normal roc)
+ * or the SKB (for mgmt TX)
+ */
+ if (!txskb) {
+ /* local->mtx protects this */
+ local->roc_cookie_counter++;
+ roc->cookie = local->roc_cookie_counter;
+ /* wow, you wrapped 64 bits ... more likely a bug */
+ if (WARN_ON(roc->cookie == 0)) {
+ roc->cookie = 1;
+ local->roc_cookie_counter++;
+ }
+ *cookie = roc->cookie;
+ } else {
+ *cookie = (unsigned long)txskb;
+ }
+
/* if there's one pending or we're scanning, queue this one */
if (!list_empty(&local->roc_list) ||
local->scanning || local->radar_detect_enabled)
@@ -2772,24 +2792,6 @@
if (!queued)
list_add_tail(&roc->list, &local->roc_list);
- /*
- * cookie is either the roc cookie (for normal roc)
- * or the SKB (for mgmt TX)
- */
- if (!txskb) {
- /* local->mtx protects this */
- local->roc_cookie_counter++;
- roc->cookie = local->roc_cookie_counter;
- /* wow, you wrapped 64 bits ... more likely a bug */
- if (WARN_ON(roc->cookie == 0)) {
- roc->cookie = 1;
- local->roc_cookie_counter++;
- }
- *cookie = roc->cookie;
- } else {
- *cookie = (unsigned long)txskb;
- }
-
return 0;
}
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index fab7b91..70dd013d 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -466,7 +466,9 @@
u.ap.request_smps_work);
sdata_lock(sdata);
- __ieee80211_request_smps_ap(sdata, sdata->u.ap.driver_smps_mode);
+ if (sdata_dereference(sdata->u.ap.beacon, sdata))
+ __ieee80211_request_smps_ap(sdata,
+ sdata->u.ap.driver_smps_mode);
sdata_unlock(sdata);
}
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 771080e..2796a19 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -695,12 +695,9 @@
struct cfg80211_bss *cbss;
struct beacon_data *presp;
struct sta_info *sta;
- int active_ibss;
u16 capability;
- active_ibss = ieee80211_sta_active_ibss(sdata);
-
- if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) {
+ if (!is_zero_ether_addr(ifibss->bssid)) {
capability = WLAN_CAPABILITY_IBSS;
if (ifibss->privacy)
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 3dfd20a..d6d1f1d 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -418,20 +418,24 @@
return ret;
}
+ mutex_lock(&local->iflist_mtx);
+ rcu_assign_pointer(local->monitor_sdata, sdata);
+ mutex_unlock(&local->iflist_mtx);
+
mutex_lock(&local->mtx);
ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef,
IEEE80211_CHANCTX_EXCLUSIVE);
mutex_unlock(&local->mtx);
if (ret) {
+ mutex_lock(&local->iflist_mtx);
+ rcu_assign_pointer(local->monitor_sdata, NULL);
+ mutex_unlock(&local->iflist_mtx);
+ synchronize_net();
drv_remove_interface(local, sdata);
kfree(sdata);
return ret;
}
- mutex_lock(&local->iflist_mtx);
- rcu_assign_pointer(local->monitor_sdata, sdata);
- mutex_unlock(&local->iflist_mtx);
-
return 0;
}
@@ -770,12 +774,19 @@
ieee80211_roc_purge(local, sdata);
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_STATION:
ieee80211_mgd_stop(sdata);
-
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ break;
+ case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_stop(sdata);
-
+ break;
+ case NL80211_IFTYPE_AP:
+ cancel_work_sync(&sdata->u.ap.request_smps_work);
+ break;
+ default:
+ break;
+ }
/*
* Remove all stations associated with this interface.
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 27c990b..97a02d3 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -878,7 +878,7 @@
}
/* adjust first fragment's length */
- skb->len = hdrlen + per_fragm;
+ skb_trim(skb, hdrlen + per_fragm);
return 0;
}
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index c374675..e9410d1 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -513,7 +513,6 @@
config NFT_REJECT
depends on NF_TABLES
- depends on NF_TABLES_IPV6 || !NF_TABLES_IPV6
default m if NETFILTER_ADVANCED=n
tristate "Netfilter nf_tables reject support"
help
@@ -521,6 +520,11 @@
explicitly deny and notify via TCP reset/ICMP informational errors
unallowed traffic.
+config NFT_REJECT_INET
+ depends on NF_TABLES_INET
+ default NFT_REJECT
+ tristate
+
config NFT_COMPAT
depends on NF_TABLES
depends on NETFILTER_XTABLES
diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile
index ee9c4de..bffdad7 100644
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -79,6 +79,7 @@
obj-$(CONFIG_NFT_NAT) += nft_nat.o
obj-$(CONFIG_NFT_QUEUE) += nft_queue.o
obj-$(CONFIG_NFT_REJECT) += nft_reject.o
+obj-$(CONFIG_NFT_REJECT_INET) += nft_reject_inet.o
obj-$(CONFIG_NFT_RBTREE) += nft_rbtree.o
obj-$(CONFIG_NFT_HASH) += nft_hash.o
obj-$(CONFIG_NFT_COUNTER) += nft_counter.o
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 59a1a85..a8eb0a8 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -871,11 +871,11 @@
cp->protocol = p->protocol;
ip_vs_addr_set(p->af, &cp->caddr, p->caddr);
cp->cport = p->cport;
- ip_vs_addr_set(p->af, &cp->vaddr, p->vaddr);
- cp->vport = p->vport;
- /* proto should only be IPPROTO_IP if d_addr is a fwmark */
+ /* proto should only be IPPROTO_IP if p->vaddr is a fwmark */
ip_vs_addr_set(p->protocol == IPPROTO_IP ? AF_UNSPEC : p->af,
- &cp->daddr, daddr);
+ &cp->vaddr, p->vaddr);
+ cp->vport = p->vport;
+ ip_vs_addr_set(p->af, &cp->daddr, daddr);
cp->dport = dport;
cp->flags = flags;
cp->fwmark = fwmark;
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 8824ed0..356bef5 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -312,6 +312,21 @@
nf_ct_delete((struct nf_conn *)ul_conntrack, 0, 0);
}
+static inline bool
+nf_ct_key_equal(struct nf_conntrack_tuple_hash *h,
+ const struct nf_conntrack_tuple *tuple,
+ u16 zone)
+{
+ struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
+
+ /* A conntrack can be recreated with the equal tuple,
+ * so we need to check that the conntrack is confirmed
+ */
+ return nf_ct_tuple_equal(tuple, &h->tuple) &&
+ nf_ct_zone(ct) == zone &&
+ nf_ct_is_confirmed(ct);
+}
+
/*
* Warning :
* - Caller must take a reference on returned object
@@ -333,8 +348,7 @@
local_bh_disable();
begin:
hlist_nulls_for_each_entry_rcu(h, n, &net->ct.hash[bucket], hnnode) {
- if (nf_ct_tuple_equal(tuple, &h->tuple) &&
- nf_ct_zone(nf_ct_tuplehash_to_ctrack(h)) == zone) {
+ if (nf_ct_key_equal(h, tuple, zone)) {
NF_CT_STAT_INC(net, found);
local_bh_enable();
return h;
@@ -372,8 +386,7 @@
!atomic_inc_not_zero(&ct->ct_general.use)))
h = NULL;
else {
- if (unlikely(!nf_ct_tuple_equal(tuple, &h->tuple) ||
- nf_ct_zone(ct) != zone)) {
+ if (unlikely(!nf_ct_key_equal(h, tuple, zone))) {
nf_ct_put(ct);
goto begin;
}
@@ -435,7 +448,9 @@
goto out;
add_timer(&ct->timeout);
- nf_conntrack_get(&ct->ct_general);
+ smp_wmb();
+ /* The caller holds a reference to this object */
+ atomic_set(&ct->ct_general.use, 2);
__nf_conntrack_hash_insert(ct, hash, repl_hash);
NF_CT_STAT_INC(net, insert);
spin_unlock_bh(&nf_conntrack_lock);
@@ -449,6 +464,21 @@
}
EXPORT_SYMBOL_GPL(nf_conntrack_hash_check_insert);
+/* deletion from this larval template list happens via nf_ct_put() */
+void nf_conntrack_tmpl_insert(struct net *net, struct nf_conn *tmpl)
+{
+ __set_bit(IPS_TEMPLATE_BIT, &tmpl->status);
+ __set_bit(IPS_CONFIRMED_BIT, &tmpl->status);
+ nf_conntrack_get(&tmpl->ct_general);
+
+ spin_lock_bh(&nf_conntrack_lock);
+ /* Overload tuple linked list to put us in template list. */
+ hlist_nulls_add_head_rcu(&tmpl->tuplehash[IP_CT_DIR_ORIGINAL].hnnode,
+ &net->ct.tmpl);
+ spin_unlock_bh(&nf_conntrack_lock);
+}
+EXPORT_SYMBOL_GPL(nf_conntrack_tmpl_insert);
+
/* Confirm a connection given skb; places it in hash table */
int
__nf_conntrack_confirm(struct sk_buff *skb)
@@ -720,11 +750,10 @@
nf_ct_zone->id = zone;
}
#endif
- /*
- * changes to lookup keys must be done before setting refcnt to 1
+ /* Because we use RCU lookups, we set ct_general.use to zero before
+ * this is inserted in any list.
*/
- smp_wmb();
- atomic_set(&ct->ct_general.use, 1);
+ atomic_set(&ct->ct_general.use, 0);
return ct;
#ifdef CONFIG_NF_CONNTRACK_ZONES
@@ -748,6 +777,11 @@
{
struct net *net = nf_ct_net(ct);
+ /* A freed object has refcnt == 0, that's
+ * the golden rule for SLAB_DESTROY_BY_RCU
+ */
+ NF_CT_ASSERT(atomic_read(&ct->ct_general.use) == 0);
+
nf_ct_ext_destroy(ct);
nf_ct_ext_free(ct);
kmem_cache_free(net->ct.nf_conntrack_cachep, ct);
@@ -843,6 +877,9 @@
NF_CT_STAT_INC(net, new);
}
+ /* Now it is inserted into the unconfirmed list, bump refcount */
+ nf_conntrack_get(&ct->ct_general);
+
/* Overload tuple linked list to put us in unconfirmed list. */
hlist_nulls_add_head_rcu(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode,
&net->ct.unconfirmed);
diff --git a/net/netfilter/nf_synproxy_core.c b/net/netfilter/nf_synproxy_core.c
index 9858e3e..52e20c9 100644
--- a/net/netfilter/nf_synproxy_core.c
+++ b/net/netfilter/nf_synproxy_core.c
@@ -363,9 +363,8 @@
goto err2;
if (!nfct_synproxy_ext_add(ct))
goto err2;
- __set_bit(IPS_TEMPLATE_BIT, &ct->status);
- __set_bit(IPS_CONFIRMED_BIT, &ct->status);
+ nf_conntrack_tmpl_insert(net, ct);
snet->tmpl = ct;
snet->stats = alloc_percpu(struct synproxy_stats);
@@ -390,7 +389,7 @@
{
struct synproxy_net *snet = synproxy_pernet(net);
- nf_conntrack_free(snet->tmpl);
+ nf_ct_put(snet->tmpl);
synproxy_proc_exit(net);
free_percpu(snet->stats);
}
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 117bbaad..adce01e 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -1008,10 +1008,8 @@
return 0;
}
-static void nf_tables_rcu_chain_destroy(struct rcu_head *head)
+static void nf_tables_chain_destroy(struct nft_chain *chain)
{
- struct nft_chain *chain = container_of(head, struct nft_chain, rcu_head);
-
BUG_ON(chain->use > 0);
if (chain->flags & NFT_BASE_CHAIN) {
@@ -1045,7 +1043,7 @@
if (IS_ERR(chain))
return PTR_ERR(chain);
- if (!list_empty(&chain->rules))
+ if (!list_empty(&chain->rules) || chain->use > 0)
return -EBUSY;
list_del(&chain->list);
@@ -1059,7 +1057,9 @@
family);
/* Make sure all rule references are gone before this is released */
- call_rcu(&chain->rcu_head, nf_tables_rcu_chain_destroy);
+ synchronize_rcu();
+
+ nf_tables_chain_destroy(chain);
return 0;
}
@@ -1114,35 +1114,45 @@
}
EXPORT_SYMBOL_GPL(nft_unregister_expr);
-static const struct nft_expr_type *__nft_expr_type_get(struct nlattr *nla)
+static const struct nft_expr_type *__nft_expr_type_get(u8 family,
+ struct nlattr *nla)
{
const struct nft_expr_type *type;
list_for_each_entry(type, &nf_tables_expressions, list) {
- if (!nla_strcmp(nla, type->name))
+ if (!nla_strcmp(nla, type->name) &&
+ (!type->family || type->family == family))
return type;
}
return NULL;
}
-static const struct nft_expr_type *nft_expr_type_get(struct nlattr *nla)
+static const struct nft_expr_type *nft_expr_type_get(u8 family,
+ struct nlattr *nla)
{
const struct nft_expr_type *type;
if (nla == NULL)
return ERR_PTR(-EINVAL);
- type = __nft_expr_type_get(nla);
+ type = __nft_expr_type_get(family, nla);
if (type != NULL && try_module_get(type->owner))
return type;
#ifdef CONFIG_MODULES
if (type == NULL) {
nfnl_unlock(NFNL_SUBSYS_NFTABLES);
+ request_module("nft-expr-%u-%.*s", family,
+ nla_len(nla), (char *)nla_data(nla));
+ nfnl_lock(NFNL_SUBSYS_NFTABLES);
+ if (__nft_expr_type_get(family, nla))
+ return ERR_PTR(-EAGAIN);
+
+ nfnl_unlock(NFNL_SUBSYS_NFTABLES);
request_module("nft-expr-%.*s",
nla_len(nla), (char *)nla_data(nla));
nfnl_lock(NFNL_SUBSYS_NFTABLES);
- if (__nft_expr_type_get(nla))
+ if (__nft_expr_type_get(family, nla))
return ERR_PTR(-EAGAIN);
}
#endif
@@ -1193,7 +1203,7 @@
if (err < 0)
return err;
- type = nft_expr_type_get(tb[NFTA_EXPR_NAME]);
+ type = nft_expr_type_get(ctx->afi->family, tb[NFTA_EXPR_NAME]);
if (IS_ERR(type))
return PTR_ERR(type);
@@ -1521,9 +1531,8 @@
return err;
}
-static void nf_tables_rcu_rule_destroy(struct rcu_head *head)
+static void nf_tables_rule_destroy(struct nft_rule *rule)
{
- struct nft_rule *rule = container_of(head, struct nft_rule, rcu_head);
struct nft_expr *expr;
/*
@@ -1538,11 +1547,6 @@
kfree(rule);
}
-static void nf_tables_rule_destroy(struct nft_rule *rule)
-{
- call_rcu(&rule->rcu_head, nf_tables_rcu_rule_destroy);
-}
-
#define NFT_RULE_MAXEXPRS 128
static struct nft_expr_info *info;
@@ -1809,9 +1813,6 @@
synchronize_rcu();
list_for_each_entry_safe(rupd, tmp, &net->nft.commit_list, list) {
- /* Delete this rule from the dirty list */
- list_del(&rupd->list);
-
/* This rule was inactive in the past and just became active.
* Clear the next bit of the genmask since its meaning has
* changed, now it is the future.
@@ -1822,6 +1823,7 @@
rupd->chain, rupd->rule,
NFT_MSG_NEWRULE, 0,
rupd->family);
+ list_del(&rupd->list);
kfree(rupd);
continue;
}
@@ -1831,7 +1833,15 @@
nf_tables_rule_notify(skb, rupd->nlh, rupd->table, rupd->chain,
rupd->rule, NFT_MSG_DELRULE, 0,
rupd->family);
+ }
+
+ /* Make sure we don't see any packet traversing old rules */
+ synchronize_rcu();
+
+ /* Now we can safely release unused old rules */
+ list_for_each_entry_safe(rupd, tmp, &net->nft.commit_list, list) {
nf_tables_rule_destroy(rupd->rule);
+ list_del(&rupd->list);
kfree(rupd);
}
@@ -1844,20 +1854,26 @@
struct nft_rule_trans *rupd, *tmp;
list_for_each_entry_safe(rupd, tmp, &net->nft.commit_list, list) {
- /* Delete all rules from the dirty list */
- list_del(&rupd->list);
-
if (!nft_rule_is_active_next(net, rupd->rule)) {
nft_rule_clear(net, rupd->rule);
+ list_del(&rupd->list);
kfree(rupd);
continue;
}
/* This rule is inactive, get rid of it */
list_del_rcu(&rupd->rule->list);
+ }
+
+ /* Make sure we don't see any packet accessing aborted rules */
+ synchronize_rcu();
+
+ list_for_each_entry_safe(rupd, tmp, &net->nft.commit_list, list) {
nf_tables_rule_destroy(rupd->rule);
+ list_del(&rupd->list);
kfree(rupd);
}
+
return 0;
}
@@ -1943,6 +1959,9 @@
}
if (nla[NFTA_SET_TABLE] != NULL) {
+ if (afi == NULL)
+ return -EAFNOSUPPORT;
+
table = nf_tables_table_lookup(afi, nla[NFTA_SET_TABLE]);
if (IS_ERR(table))
return PTR_ERR(table);
@@ -1989,13 +2008,13 @@
if (!sscanf(i->name, name, &tmp))
continue;
- if (tmp < 0 || tmp > BITS_PER_LONG * PAGE_SIZE)
+ if (tmp < 0 || tmp >= BITS_PER_BYTE * PAGE_SIZE)
continue;
set_bit(tmp, inuse);
}
- n = find_first_zero_bit(inuse, BITS_PER_LONG * PAGE_SIZE);
+ n = find_first_zero_bit(inuse, BITS_PER_BYTE * PAGE_SIZE);
free_page((unsigned long)inuse);
}
@@ -2428,6 +2447,8 @@
struct nft_ctx ctx;
int err;
+ if (nfmsg->nfgen_family == NFPROTO_UNSPEC)
+ return -EAFNOSUPPORT;
if (nla[NFTA_SET_TABLE] == NULL)
return -EINVAL;
@@ -2435,9 +2456,6 @@
if (err < 0)
return err;
- if (nfmsg->nfgen_family == NFPROTO_UNSPEC)
- return -EAFNOSUPPORT;
-
set = nf_tables_set_lookup(ctx.table, nla[NFTA_SET_NAME]);
if (IS_ERR(set))
return PTR_ERR(set);
@@ -2723,6 +2741,9 @@
if (nla[NFTA_SET_ELEM_DATA] == NULL &&
!(elem.flags & NFT_SET_ELEM_INTERVAL_END))
return -EINVAL;
+ if (nla[NFTA_SET_ELEM_DATA] != NULL &&
+ elem.flags & NFT_SET_ELEM_INTERVAL_END)
+ return -EINVAL;
} else {
if (nla[NFTA_SET_ELEM_DATA] != NULL)
return -EINVAL;
@@ -2977,6 +2998,9 @@
const struct nft_set_iter *iter,
const struct nft_set_elem *elem)
{
+ if (elem->flags & NFT_SET_ELEM_INTERVAL_END)
+ return 0;
+
switch (elem->data.verdict) {
case NFT_JUMP:
case NFT_GOTO:
diff --git a/net/netfilter/nf_tables_core.c b/net/netfilter/nf_tables_core.c
index 0d879fc..90998a6 100644
--- a/net/netfilter/nf_tables_core.c
+++ b/net/netfilter/nf_tables_core.c
@@ -103,9 +103,9 @@
},
};
-static inline void nft_trace_packet(const struct nft_pktinfo *pkt,
- const struct nft_chain *chain,
- int rulenum, enum nft_trace type)
+static void nft_trace_packet(const struct nft_pktinfo *pkt,
+ const struct nft_chain *chain,
+ int rulenum, enum nft_trace type)
{
struct net *net = dev_net(pkt->in ? pkt->in : pkt->out);
diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c
index 917052e..46e2754 100644
--- a/net/netfilter/nft_ct.c
+++ b/net/netfilter/nft_ct.c
@@ -226,6 +226,7 @@
if (tb[NFTA_CT_DIRECTION] != NULL)
return -EINVAL;
break;
+ case NFT_CT_L3PROTOCOL:
case NFT_CT_PROTOCOL:
case NFT_CT_SRC:
case NFT_CT_DST:
@@ -311,8 +312,19 @@
goto nla_put_failure;
if (nla_put_be32(skb, NFTA_CT_KEY, htonl(priv->key)))
goto nla_put_failure;
- if (nla_put_u8(skb, NFTA_CT_DIRECTION, priv->dir))
- goto nla_put_failure;
+
+ switch (priv->key) {
+ case NFT_CT_PROTOCOL:
+ case NFT_CT_SRC:
+ case NFT_CT_DST:
+ case NFT_CT_PROTO_SRC:
+ case NFT_CT_PROTO_DST:
+ if (nla_put_u8(skb, NFTA_CT_DIRECTION, priv->dir))
+ goto nla_put_failure;
+ default:
+ break;
+ }
+
return 0;
nla_put_failure:
diff --git a/net/netfilter/nft_log.c b/net/netfilter/nft_log.c
index 5af7901..26c5154 100644
--- a/net/netfilter/nft_log.c
+++ b/net/netfilter/nft_log.c
@@ -23,7 +23,6 @@
struct nft_log {
struct nf_loginfo loginfo;
char *prefix;
- int family;
};
static void nft_log_eval(const struct nft_expr *expr,
@@ -33,7 +32,7 @@
const struct nft_log *priv = nft_expr_priv(expr);
struct net *net = dev_net(pkt->in ? pkt->in : pkt->out);
- nf_log_packet(net, priv->family, pkt->ops->hooknum, pkt->skb, pkt->in,
+ nf_log_packet(net, pkt->ops->pf, pkt->ops->hooknum, pkt->skb, pkt->in,
pkt->out, &priv->loginfo, "%s", priv->prefix);
}
@@ -52,8 +51,6 @@
struct nf_loginfo *li = &priv->loginfo;
const struct nlattr *nla;
- priv->family = ctx->afi->family;
-
nla = tb[NFTA_LOG_PREFIX];
if (nla != NULL) {
priv->prefix = kmalloc(nla_len(nla) + 1, GFP_KERNEL);
diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c
index 8a6116b..bb4ef4c 100644
--- a/net/netfilter/nft_lookup.c
+++ b/net/netfilter/nft_lookup.c
@@ -16,6 +16,7 @@
#include <linux/netfilter.h>
#include <linux/netfilter/nf_tables.h>
#include <net/netfilter/nf_tables.h>
+#include <net/netfilter/nf_tables_core.h>
struct nft_lookup {
struct nft_set *set;
diff --git a/net/netfilter/nft_queue.c b/net/netfilter/nft_queue.c
index cbea473..e8ae2f6 100644
--- a/net/netfilter/nft_queue.c
+++ b/net/netfilter/nft_queue.c
@@ -25,7 +25,6 @@
u16 queuenum;
u16 queues_total;
u16 flags;
- u8 family;
};
static void nft_queue_eval(const struct nft_expr *expr,
@@ -43,7 +42,7 @@
queue = priv->queuenum + cpu % priv->queues_total;
} else {
queue = nfqueue_hash(pkt->skb, queue,
- priv->queues_total, priv->family,
+ priv->queues_total, pkt->ops->pf,
jhash_initval);
}
}
@@ -71,7 +70,6 @@
return -EINVAL;
init_hashrandom(&jhash_initval);
- priv->family = ctx->afi->family;
priv->queuenum = ntohs(nla_get_be16(tb[NFTA_QUEUE_NUM]));
if (tb[NFTA_QUEUE_TOTAL] != NULL)
diff --git a/net/netfilter/nft_rbtree.c b/net/netfilter/nft_rbtree.c
index ca0c1b2..e21d69d 100644
--- a/net/netfilter/nft_rbtree.c
+++ b/net/netfilter/nft_rbtree.c
@@ -69,8 +69,10 @@
struct nft_rbtree_elem *rbe)
{
nft_data_uninit(&rbe->key, NFT_DATA_VALUE);
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(rbe->flags & NFT_SET_ELEM_INTERVAL_END))
nft_data_uninit(rbe->data, set->dtype);
+
kfree(rbe);
}
@@ -108,7 +110,8 @@
int err;
size = sizeof(*rbe);
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(elem->flags & NFT_SET_ELEM_INTERVAL_END))
size += sizeof(rbe->data[0]);
rbe = kzalloc(size, GFP_KERNEL);
@@ -117,7 +120,8 @@
rbe->flags = elem->flags;
nft_data_copy(&rbe->key, &elem->key);
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(rbe->flags & NFT_SET_ELEM_INTERVAL_END))
nft_data_copy(rbe->data, &elem->data);
err = __nft_rbtree_insert(set, rbe);
@@ -153,7 +157,8 @@
parent = parent->rb_right;
else {
elem->cookie = rbe;
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(rbe->flags & NFT_SET_ELEM_INTERVAL_END))
nft_data_copy(&elem->data, rbe->data);
elem->flags = rbe->flags;
return 0;
@@ -177,7 +182,8 @@
rbe = rb_entry(node, struct nft_rbtree_elem, node);
nft_data_copy(&elem.key, &rbe->key);
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(rbe->flags & NFT_SET_ELEM_INTERVAL_END))
nft_data_copy(&elem.data, rbe->data);
elem.flags = rbe->flags;
diff --git a/net/netfilter/nft_reject.c b/net/netfilter/nft_reject.c
index 5e204711..f3448c2 100644
--- a/net/netfilter/nft_reject.c
+++ b/net/netfilter/nft_reject.c
@@ -16,65 +16,23 @@
#include <linux/netfilter.h>
#include <linux/netfilter/nf_tables.h>
#include <net/netfilter/nf_tables.h>
-#include <net/icmp.h>
-#include <net/netfilter/ipv4/nf_reject.h>
+#include <net/netfilter/nft_reject.h>
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
-#include <net/netfilter/ipv6/nf_reject.h>
-#endif
-
-struct nft_reject {
- enum nft_reject_types type:8;
- u8 icmp_code;
- u8 family;
-};
-
-static void nft_reject_eval(const struct nft_expr *expr,
- struct nft_data data[NFT_REG_MAX + 1],
- const struct nft_pktinfo *pkt)
-{
- struct nft_reject *priv = nft_expr_priv(expr);
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
- struct net *net = dev_net((pkt->in != NULL) ? pkt->in : pkt->out);
-#endif
- switch (priv->type) {
- case NFT_REJECT_ICMP_UNREACH:
- if (priv->family == NFPROTO_IPV4)
- nf_send_unreach(pkt->skb, priv->icmp_code);
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
- else if (priv->family == NFPROTO_IPV6)
- nf_send_unreach6(net, pkt->skb, priv->icmp_code,
- pkt->ops->hooknum);
-#endif
- break;
- case NFT_REJECT_TCP_RST:
- if (priv->family == NFPROTO_IPV4)
- nf_send_reset(pkt->skb, pkt->ops->hooknum);
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
- else if (priv->family == NFPROTO_IPV6)
- nf_send_reset6(net, pkt->skb, pkt->ops->hooknum);
-#endif
- break;
- }
-
- data[NFT_REG_VERDICT].verdict = NF_DROP;
-}
-
-static const struct nla_policy nft_reject_policy[NFTA_REJECT_MAX + 1] = {
+const struct nla_policy nft_reject_policy[NFTA_REJECT_MAX + 1] = {
[NFTA_REJECT_TYPE] = { .type = NLA_U32 },
[NFTA_REJECT_ICMP_CODE] = { .type = NLA_U8 },
};
+EXPORT_SYMBOL_GPL(nft_reject_policy);
-static int nft_reject_init(const struct nft_ctx *ctx,
- const struct nft_expr *expr,
- const struct nlattr * const tb[])
+int nft_reject_init(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nlattr * const tb[])
{
struct nft_reject *priv = nft_expr_priv(expr);
if (tb[NFTA_REJECT_TYPE] == NULL)
return -EINVAL;
- priv->family = ctx->afi->family;
priv->type = ntohl(nla_get_be32(tb[NFTA_REJECT_TYPE]));
switch (priv->type) {
case NFT_REJECT_ICMP_UNREACH:
@@ -89,8 +47,9 @@
return 0;
}
+EXPORT_SYMBOL_GPL(nft_reject_init);
-static int nft_reject_dump(struct sk_buff *skb, const struct nft_expr *expr)
+int nft_reject_dump(struct sk_buff *skb, const struct nft_expr *expr)
{
const struct nft_reject *priv = nft_expr_priv(expr);
@@ -109,37 +68,7 @@
nla_put_failure:
return -1;
}
-
-static struct nft_expr_type nft_reject_type;
-static const struct nft_expr_ops nft_reject_ops = {
- .type = &nft_reject_type,
- .size = NFT_EXPR_SIZE(sizeof(struct nft_reject)),
- .eval = nft_reject_eval,
- .init = nft_reject_init,
- .dump = nft_reject_dump,
-};
-
-static struct nft_expr_type nft_reject_type __read_mostly = {
- .name = "reject",
- .ops = &nft_reject_ops,
- .policy = nft_reject_policy,
- .maxattr = NFTA_REJECT_MAX,
- .owner = THIS_MODULE,
-};
-
-static int __init nft_reject_module_init(void)
-{
- return nft_register_expr(&nft_reject_type);
-}
-
-static void __exit nft_reject_module_exit(void)
-{
- nft_unregister_expr(&nft_reject_type);
-}
-
-module_init(nft_reject_module_init);
-module_exit(nft_reject_module_exit);
+EXPORT_SYMBOL_GPL(nft_reject_dump);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Patrick McHardy <kaber@trash.net>");
-MODULE_ALIAS_NFT_EXPR("reject");
diff --git a/net/netfilter/nft_reject_inet.c b/net/netfilter/nft_reject_inet.c
new file mode 100644
index 0000000..8a310f2
--- /dev/null
+++ b/net/netfilter/nft_reject_inet.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2014 Patrick McHardy <kaber@trash.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/netlink.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/nf_tables.h>
+#include <net/netfilter/nf_tables.h>
+#include <net/netfilter/nft_reject.h>
+
+static void nft_reject_inet_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt)
+{
+ switch (pkt->ops->pf) {
+ case NFPROTO_IPV4:
+ nft_reject_ipv4_eval(expr, data, pkt);
+ case NFPROTO_IPV6:
+ nft_reject_ipv6_eval(expr, data, pkt);
+ }
+}
+
+static struct nft_expr_type nft_reject_inet_type;
+static const struct nft_expr_ops nft_reject_inet_ops = {
+ .type = &nft_reject_inet_type,
+ .size = NFT_EXPR_SIZE(sizeof(struct nft_reject)),
+ .eval = nft_reject_inet_eval,
+ .init = nft_reject_init,
+ .dump = nft_reject_dump,
+};
+
+static struct nft_expr_type nft_reject_inet_type __read_mostly = {
+ .family = NFPROTO_INET,
+ .name = "reject",
+ .ops = &nft_reject_inet_ops,
+ .policy = nft_reject_policy,
+ .maxattr = NFTA_REJECT_MAX,
+ .owner = THIS_MODULE,
+};
+
+static int __init nft_reject_inet_module_init(void)
+{
+ return nft_register_expr(&nft_reject_inet_type);
+}
+
+static void __exit nft_reject_inet_module_exit(void)
+{
+ nft_unregister_expr(&nft_reject_inet_type);
+}
+
+module_init(nft_reject_inet_module_init);
+module_exit(nft_reject_inet_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick McHardy <kaber@trash.net>");
+MODULE_ALIAS_NFT_AF_EXPR(1, "reject");
diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c
index 5929be6..75747ae 100644
--- a/net/netfilter/xt_CT.c
+++ b/net/netfilter/xt_CT.c
@@ -228,12 +228,7 @@
goto err3;
}
- __set_bit(IPS_TEMPLATE_BIT, &ct->status);
- __set_bit(IPS_CONFIRMED_BIT, &ct->status);
-
- /* Overload tuple linked list to put us in template list. */
- hlist_nulls_add_head_rcu(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode,
- &par->net->ct.tmpl);
+ nf_conntrack_tmpl_insert(par->net, ct);
out:
info->ct = ct;
return 0;
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index df46928..e9a48ba 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -55,6 +55,7 @@
#include "datapath.h"
#include "flow.h"
+#include "flow_table.h"
#include "flow_netlink.h"
#include "vport-internal_dev.h"
#include "vport-netdev.h"
@@ -160,7 +161,6 @@
{
struct datapath *dp = container_of(rcu, struct datapath, rcu);
- ovs_flow_tbl_destroy(&dp->table);
free_percpu(dp->stats_percpu);
release_net(ovs_dp_get_net(dp));
kfree(dp->ports);
@@ -466,6 +466,14 @@
skb_zerocopy(user_skb, skb, skb->len, hlen);
+ /* Pad OVS_PACKET_ATTR_PACKET if linear copy was performed */
+ if (!(dp->user_features & OVS_DP_F_UNALIGNED)) {
+ size_t plen = NLA_ALIGN(user_skb->len) - user_skb->len;
+
+ if (plen > 0)
+ memset(skb_put(user_skb, plen), 0, plen);
+ }
+
((struct nlmsghdr *) user_skb->data)->nlmsg_len = user_skb->len;
err = genlmsg_unicast(ovs_dp_get_net(dp), user_skb, upcall_info->portid);
@@ -852,11 +860,8 @@
goto err_unlock_ovs;
/* The unmasked key has to be the same for flow updates. */
- error = -EINVAL;
- if (!ovs_flow_cmp_unmasked_key(flow, &match)) {
- OVS_NLERR("Flow modification message rejected, unmasked key does not match.\n");
+ if (!ovs_flow_cmp_unmasked_key(flow, &match))
goto err_unlock_ovs;
- }
/* Update actions. */
old_acts = ovsl_dereference(flow->sf_acts);
@@ -1079,6 +1084,7 @@
msgsize += nla_total_size(IFNAMSIZ);
msgsize += nla_total_size(sizeof(struct ovs_dp_stats));
msgsize += nla_total_size(sizeof(struct ovs_dp_megaflow_stats));
+ msgsize += nla_total_size(sizeof(u32)); /* OVS_DP_ATTR_USER_FEATURES */
return msgsize;
}
@@ -1279,7 +1285,7 @@
err_destroy_percpu:
free_percpu(dp->stats_percpu);
err_destroy_table:
- ovs_flow_tbl_destroy(&dp->table);
+ ovs_flow_tbl_destroy(&dp->table, false);
err_free_dp:
release_net(ovs_dp_get_net(dp));
kfree(dp);
@@ -1306,10 +1312,13 @@
list_del_rcu(&dp->list_node);
/* OVSP_LOCAL is datapath internal port. We need to make sure that
- * all port in datapath are destroyed first before freeing datapath.
+ * all ports in datapath are destroyed first before freeing datapath.
*/
ovs_dp_detach_port(ovs_vport_ovsl(dp, OVSP_LOCAL));
+ /* RCU destroy the flow table */
+ ovs_flow_tbl_destroy(&dp->table, true);
+
call_rcu(&dp->rcu, destroy_dp_rcu);
}
diff --git a/net/openvswitch/flow_table.c b/net/openvswitch/flow_table.c
index c58a0fe..3c268b3 100644
--- a/net/openvswitch/flow_table.c
+++ b/net/openvswitch/flow_table.c
@@ -153,29 +153,29 @@
flow_free(flow);
}
-static void flow_mask_del_ref(struct sw_flow_mask *mask, bool deferred)
-{
- if (!mask)
- return;
-
- BUG_ON(!mask->ref_count);
- mask->ref_count--;
-
- if (!mask->ref_count) {
- list_del_rcu(&mask->list);
- if (deferred)
- kfree_rcu(mask, rcu);
- else
- kfree(mask);
- }
-}
-
void ovs_flow_free(struct sw_flow *flow, bool deferred)
{
if (!flow)
return;
- flow_mask_del_ref(flow->mask, deferred);
+ if (flow->mask) {
+ struct sw_flow_mask *mask = flow->mask;
+
+ /* ovs-lock is required to protect mask-refcount and
+ * mask list.
+ */
+ ASSERT_OVSL();
+ BUG_ON(!mask->ref_count);
+ mask->ref_count--;
+
+ if (!mask->ref_count) {
+ list_del_rcu(&mask->list);
+ if (deferred)
+ kfree_rcu(mask, rcu);
+ else
+ kfree(mask);
+ }
+ }
if (deferred)
call_rcu(&flow->rcu, rcu_free_flow_callback);
@@ -188,26 +188,9 @@
flex_array_free(buckets);
}
+
static void __table_instance_destroy(struct table_instance *ti)
{
- int i;
-
- if (ti->keep_flows)
- goto skip_flows;
-
- for (i = 0; i < ti->n_buckets; i++) {
- struct sw_flow *flow;
- struct hlist_head *head = flex_array_get(ti->buckets, i);
- struct hlist_node *n;
- int ver = ti->node_ver;
-
- hlist_for_each_entry_safe(flow, n, head, hash_node[ver]) {
- hlist_del(&flow->hash_node[ver]);
- ovs_flow_free(flow, false);
- }
- }
-
-skip_flows:
free_buckets(ti->buckets);
kfree(ti);
}
@@ -258,20 +241,38 @@
static void table_instance_destroy(struct table_instance *ti, bool deferred)
{
+ int i;
+
if (!ti)
return;
+ if (ti->keep_flows)
+ goto skip_flows;
+
+ for (i = 0; i < ti->n_buckets; i++) {
+ struct sw_flow *flow;
+ struct hlist_head *head = flex_array_get(ti->buckets, i);
+ struct hlist_node *n;
+ int ver = ti->node_ver;
+
+ hlist_for_each_entry_safe(flow, n, head, hash_node[ver]) {
+ hlist_del_rcu(&flow->hash_node[ver]);
+ ovs_flow_free(flow, deferred);
+ }
+ }
+
+skip_flows:
if (deferred)
call_rcu(&ti->rcu, flow_tbl_destroy_rcu_cb);
else
__table_instance_destroy(ti);
}
-void ovs_flow_tbl_destroy(struct flow_table *table)
+void ovs_flow_tbl_destroy(struct flow_table *table, bool deferred)
{
struct table_instance *ti = ovsl_dereference(table->ti);
- table_instance_destroy(ti, false);
+ table_instance_destroy(ti, deferred);
}
struct sw_flow *ovs_flow_tbl_dump_next(struct table_instance *ti,
@@ -504,16 +505,11 @@
mask = kmalloc(sizeof(*mask), GFP_KERNEL);
if (mask)
- mask->ref_count = 0;
+ mask->ref_count = 1;
return mask;
}
-static void mask_add_ref(struct sw_flow_mask *mask)
-{
- mask->ref_count++;
-}
-
static bool mask_equal(const struct sw_flow_mask *a,
const struct sw_flow_mask *b)
{
@@ -554,9 +550,11 @@
mask->key = new->key;
mask->range = new->range;
list_add_rcu(&mask->list, &tbl->mask_list);
+ } else {
+ BUG_ON(!mask->ref_count);
+ mask->ref_count++;
}
- mask_add_ref(mask);
flow->mask = mask;
return 0;
}
diff --git a/net/openvswitch/flow_table.h b/net/openvswitch/flow_table.h
index 1996e34..baaeb10 100644
--- a/net/openvswitch/flow_table.h
+++ b/net/openvswitch/flow_table.h
@@ -60,7 +60,7 @@
int ovs_flow_tbl_init(struct flow_table *);
int ovs_flow_tbl_count(struct flow_table *table);
-void ovs_flow_tbl_destroy(struct flow_table *table);
+void ovs_flow_tbl_destroy(struct flow_table *table, bool deferred);
int ovs_flow_tbl_flush(struct flow_table *flow_table);
int ovs_flow_tbl_insert(struct flow_table *table, struct sw_flow *flow,
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 0f6259a..2b1738e 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -662,6 +662,8 @@
*/
sctp_v6_to_sk_daddr(&asoc->peer.primary_addr, newsk);
+ newsk->sk_v6_rcv_saddr = sk->sk_v6_rcv_saddr;
+
sk_refcnt_debug_inc(newsk);
if (newsk->sk_prot->init(newsk)) {
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 80a6640..06c6ff0 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -571,7 +571,7 @@
}
}
-int svc_alloc_arg(struct svc_rqst *rqstp)
+static int svc_alloc_arg(struct svc_rqst *rqstp)
{
struct svc_serv *serv = rqstp->rq_server;
struct xdr_buf *arg;
@@ -612,7 +612,7 @@
return 0;
}
-struct svc_xprt *svc_get_next_xprt(struct svc_rqst *rqstp, long timeout)
+static struct svc_xprt *svc_get_next_xprt(struct svc_rqst *rqstp, long timeout)
{
struct svc_xprt *xprt;
struct svc_pool *pool = rqstp->rq_pool;
@@ -691,7 +691,7 @@
return xprt;
}
-void svc_add_new_temp_xprt(struct svc_serv *serv, struct svc_xprt *newxpt)
+static void svc_add_new_temp_xprt(struct svc_serv *serv, struct svc_xprt *newxpt)
{
spin_lock_bh(&serv->sv_lock);
set_bit(XPT_TEMP, &newxpt->xpt_flags);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index d89dee2..010892b 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -203,8 +203,11 @@
rdev->opencount--;
- WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev &&
- !rdev->scan_req->notified);
+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
+ if (WARN_ON(!rdev->scan_req->notified))
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, false);
+ }
}
static int cfg80211_rfkill_set_block(void *data, bool blocked)
@@ -440,9 +443,6 @@
int i;
u16 ifmodes = wiphy->interface_modes;
- /* support for 5/10 MHz is broken due to nl80211 API mess - disable */
- wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_5_10_MHZ;
-
/*
* There are major locking problems in nl80211/mac80211 for CSA,
* disable for all drivers until this has been reworked.
@@ -859,8 +859,11 @@
break;
case NETDEV_DOWN:
cfg80211_update_iface_num(rdev, wdev->iftype, -1);
- WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev &&
- !rdev->scan_req->notified);
+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
+ if (WARN_ON(!rdev->scan_req->notified))
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, false);
+ }
if (WARN_ON(rdev->sched_scan_req &&
rdev->sched_scan_req->dev == wdev->netdev)) {
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 37ec16d..f1d193b 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -62,6 +62,7 @@
struct rb_root bss_tree;
u32 bss_generation;
struct cfg80211_scan_request *scan_req; /* protected by RTNL */
+ struct sk_buff *scan_msg;
struct cfg80211_sched_scan_request *sched_scan_req;
unsigned long suspend_at;
struct work_struct scan_done_wk;
@@ -361,7 +362,8 @@
struct key_params *params, int key_idx,
bool pairwise, const u8 *mac_addr);
void __cfg80211_scan_done(struct work_struct *wk);
-void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev);
+void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev,
+ bool send_message);
void __cfg80211_sched_scan_results(struct work_struct *wk);
int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
bool driver_initiated);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7a74259..4fe2e6e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1719,9 +1719,10 @@
* We can then retry with the larger buffer.
*/
if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
- !skb->len &&
+ !skb->len && !state->split &&
cb->min_dump_alloc < 4096) {
cb->min_dump_alloc = 4096;
+ state->split_start = 0;
rtnl_unlock();
return 1;
}
@@ -5244,7 +5245,7 @@
if (!rdev->ops->scan)
return -EOPNOTSUPP;
- if (rdev->scan_req) {
+ if (rdev->scan_req || rdev->scan_msg) {
err = -EBUSY;
goto unlock;
}
@@ -10011,40 +10012,31 @@
NL80211_MCGRP_SCAN, GFP_KERNEL);
}
-void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev)
+struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev, bool aborted)
{
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
- return;
+ return NULL;
if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0,
- NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
+ aborted ? NL80211_CMD_SCAN_ABORTED :
+ NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
nlmsg_free(msg);
- return;
+ return NULL;
}
- genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
- NL80211_MCGRP_SCAN, GFP_KERNEL);
+ return msg;
}
-void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev)
+void nl80211_send_scan_result(struct cfg80211_registered_device *rdev,
+ struct sk_buff *msg)
{
- struct sk_buff *msg;
-
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
- if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0,
- NL80211_CMD_SCAN_ABORTED) < 0) {
- nlmsg_free(msg);
- return;
- }
-
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_SCAN, GFP_KERNEL);
}
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index b1b2313..7579974 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -8,10 +8,10 @@
void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev);
void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev);
-void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev);
-void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev);
+struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev, bool aborted);
+void nl80211_send_scan_result(struct cfg80211_registered_device *rdev,
+ struct sk_buff *msg);
void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u32 cmd);
void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index b528e31..d1ed4ae 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -161,18 +161,25 @@
dev->bss_generation++;
}
-void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev)
+void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev,
+ bool send_message)
{
struct cfg80211_scan_request *request;
struct wireless_dev *wdev;
+ struct sk_buff *msg;
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
ASSERT_RTNL();
- request = rdev->scan_req;
+ if (rdev->scan_msg) {
+ nl80211_send_scan_result(rdev, rdev->scan_msg);
+ rdev->scan_msg = NULL;
+ return;
+ }
+ request = rdev->scan_req;
if (!request)
return;
@@ -186,18 +193,16 @@
if (wdev->netdev)
cfg80211_sme_scan_done(wdev->netdev);
- if (request->aborted) {
- nl80211_send_scan_aborted(rdev, wdev);
- } else {
- if (request->flags & NL80211_SCAN_FLAG_FLUSH) {
- /* flush entries from previous scans */
- spin_lock_bh(&rdev->bss_lock);
- __cfg80211_bss_expire(rdev, request->scan_start);
- spin_unlock_bh(&rdev->bss_lock);
- }
- nl80211_send_scan_done(rdev, wdev);
+ if (!request->aborted &&
+ request->flags & NL80211_SCAN_FLAG_FLUSH) {
+ /* flush entries from previous scans */
+ spin_lock_bh(&rdev->bss_lock);
+ __cfg80211_bss_expire(rdev, request->scan_start);
+ spin_unlock_bh(&rdev->bss_lock);
}
+ msg = nl80211_build_scan_msg(rdev, wdev, request->aborted);
+
#ifdef CONFIG_CFG80211_WEXT
if (wdev->netdev && !request->aborted) {
memset(&wrqu, 0, sizeof(wrqu));
@@ -211,6 +216,11 @@
rdev->scan_req = NULL;
kfree(request);
+
+ if (!send_message)
+ rdev->scan_msg = msg;
+ else
+ nl80211_send_scan_result(rdev, msg);
}
void __cfg80211_scan_done(struct work_struct *wk)
@@ -221,7 +231,7 @@
scan_done_wk);
rtnl_lock();
- ___cfg80211_scan_done(rdev);
+ ___cfg80211_scan_done(rdev, true);
rtnl_unlock();
}
@@ -1079,7 +1089,7 @@
if (IS_ERR(rdev))
return PTR_ERR(rdev);
- if (rdev->scan_req) {
+ if (rdev->scan_req || rdev->scan_msg) {
err = -EBUSY;
goto out;
}
@@ -1481,7 +1491,7 @@
if (IS_ERR(rdev))
return PTR_ERR(rdev);
- if (rdev->scan_req)
+ if (rdev->scan_req || rdev->scan_msg)
return -EAGAIN;
res = ieee80211_scan_results(rdev, info, extra, data->length);
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index a635091..f04d4c3 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -67,7 +67,7 @@
ASSERT_RDEV_LOCK(rdev);
ASSERT_WDEV_LOCK(wdev);
- if (rdev->scan_req)
+ if (rdev->scan_req || rdev->scan_msg)
return -EBUSY;
if (wdev->conn->params.channel)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 0ea2a1e..464dcef 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -471,7 +471,7 @@
$camelcase_seeded = 1;
- if (-d ".git") {
+ if (-e ".git") {
my $git_last_include_commit = `git log --no-merges --pretty=format:"%h%n" -1 -- include`;
chomp $git_last_include_commit;
$camelcase_cache = ".checkpatch-camelcase.git.$git_last_include_commit";
@@ -499,7 +499,7 @@
return;
}
- if (-d ".git") {
+ if (-e ".git") {
$files = `git ls-files "include/*.h"`;
@include_files = split('\n', $files);
}
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 9c3986f..4198788 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -95,7 +95,7 @@
my %VCS_cmds_git = (
"execute_cmd" => \&git_execute_cmd,
- "available" => '(which("git") ne "") && (-d ".git")',
+ "available" => '(which("git") ne "") && (-e ".git")',
"find_signers_cmd" =>
"git log --no-color --follow --since=\$email_git_since " .
'--numstat --no-merges ' .
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 2370863..25e5cb0 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -210,8 +210,8 @@
range_lo < 0x9 ? "[%X-9" : "[%X",
range_lo);
sprintf(alias + strlen(alias),
- range_hi > 0xA ? "a-%X]" : "%X]",
- range_lo);
+ range_hi > 0xA ? "A-%X]" : "%X]",
+ range_hi);
}
}
if (bcdDevice_initial_digits < (sizeof(bcdDevice_lo) * 2 - 1))
diff --git a/security/Kconfig b/security/Kconfig
index e9c6ac7..beb86b5 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -103,7 +103,7 @@
config LSM_MMAP_MIN_ADDR
int "Low address space for LSM to protect from user allocation"
depends on SECURITY && SECURITY_SELINUX
- default 32768 if ARM
+ default 32768 if ARM || (ARM64 && COMPAT)
default 65536
help
This is the portion of low virtual memory which should be protected
diff --git a/security/selinux/nlmsgtab.c b/security/selinux/nlmsgtab.c
index 332ac8a..2df7b90 100644
--- a/security/selinux/nlmsgtab.c
+++ b/security/selinux/nlmsgtab.c
@@ -17,6 +17,7 @@
#include <linux/inet_diag.h>
#include <linux/xfrm.h>
#include <linux/audit.h>
+#include <linux/sock_diag.h>
#include "flask.h"
#include "av_permissions.h"
@@ -78,6 +79,7 @@
{
{ TCPDIAG_GETSOCK, NETLINK_TCPDIAG_SOCKET__NLMSG_READ },
{ DCCPDIAG_GETSOCK, NETLINK_TCPDIAG_SOCKET__NLMSG_READ },
+ { SOCK_DIAG_BY_FAMILY, NETLINK_TCPDIAG_SOCKET__NLMSG_READ },
};
static struct nlmsg_perm nlmsg_xfrm_perms[] =
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index c93c211..5d0144e 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -1232,6 +1232,10 @@
struct context context;
int rc = 0;
+ /* An empty security context is never valid. */
+ if (!scontext_len)
+ return -EINVAL;
+
if (!ss_initialized) {
int i;
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ec4536c..dafcf82 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -932,7 +932,7 @@
}
EXPORT_SYMBOL_GPL(snd_hda_bus_new);
-#ifdef CONFIG_SND_HDA_GENERIC
+#if IS_ENABLED(CONFIG_SND_HDA_GENERIC)
#define is_generic_config(codec) \
(codec->modelname && !strcmp(codec->modelname, "generic"))
#else
@@ -1339,23 +1339,15 @@
/*
* Dynamic symbol binding for the codec parsers
*/
-#ifdef MODULE
-#define load_parser_sym(sym) ((int (*)(struct hda_codec *))symbol_request(sym))
-#define unload_parser_addr(addr) symbol_put_addr(addr)
-#else
-#define load_parser_sym(sym) (sym)
-#define unload_parser_addr(addr) do {} while (0)
-#endif
#define load_parser(codec, sym) \
- ((codec)->parser = load_parser_sym(sym))
+ ((codec)->parser = (int (*)(struct hda_codec *))symbol_request(sym))
static void unload_parser(struct hda_codec *codec)
{
- if (codec->parser) {
- unload_parser_addr(codec->parser);
- codec->parser = NULL;
- }
+ if (codec->parser)
+ symbol_put_addr(codec->parser);
+ codec->parser = NULL;
}
/*
@@ -1570,7 +1562,7 @@
EXPORT_SYMBOL_GPL(snd_hda_codec_update_widgets);
-#ifdef CONFIG_SND_HDA_CODEC_HDMI
+#if IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI)
/* if all audio out widgets are digital, let's assume the codec as a HDMI/DP */
static bool is_likely_hdmi_codec(struct hda_codec *codec)
{
@@ -1620,12 +1612,20 @@
patch = codec->preset->patch;
if (!patch) {
unload_parser(codec); /* to be sure */
- if (is_likely_hdmi_codec(codec))
+ if (is_likely_hdmi_codec(codec)) {
+#if IS_MODULE(CONFIG_SND_HDA_CODEC_HDMI)
patch = load_parser(codec, snd_hda_parse_hdmi_codec);
-#ifdef CONFIG_SND_HDA_GENERIC
- if (!patch)
- patch = load_parser(codec, snd_hda_parse_generic_codec);
+#elif IS_BUILTIN(CONFIG_SND_HDA_CODEC_HDMI)
+ patch = snd_hda_parse_hdmi_codec;
#endif
+ }
+ if (!patch) {
+#if IS_MODULE(CONFIG_SND_HDA_GENERIC)
+ patch = load_parser(codec, snd_hda_parse_generic_codec);
+#elif IS_BUILTIN(CONFIG_SND_HDA_GENERIC)
+ patch = snd_hda_parse_generic_codec;
+#endif
+ }
if (!patch) {
printk(KERN_ERR "hda-codec: No codec parser is available\n");
return -ENODEV;
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 8321a97..d9a09bd 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -3269,7 +3269,7 @@
mutex_unlock(&codec->control_mutex);
snd_hda_codec_flush_cache(codec); /* flush the updates */
if (err >= 0 && spec->cap_sync_hook)
- spec->cap_sync_hook(codec, ucontrol);
+ spec->cap_sync_hook(codec, kcontrol, ucontrol);
return err;
}
@@ -3390,7 +3390,7 @@
return ret;
if (spec->cap_sync_hook)
- spec->cap_sync_hook(codec, ucontrol);
+ spec->cap_sync_hook(codec, kcontrol, ucontrol);
return ret;
}
@@ -3795,7 +3795,7 @@
return 0;
snd_hda_activate_path(codec, path, true, false);
if (spec->cap_sync_hook)
- spec->cap_sync_hook(codec, NULL);
+ spec->cap_sync_hook(codec, NULL, NULL);
path_power_down_sync(codec, old_path);
return 1;
}
@@ -5270,7 +5270,7 @@
}
if (spec->cap_sync_hook)
- spec->cap_sync_hook(codec, NULL);
+ spec->cap_sync_hook(codec, NULL, NULL);
}
/* set right pin controls for digital I/O */
diff --git a/sound/pci/hda/hda_generic.h b/sound/pci/hda/hda_generic.h
index 07f7672..c908afb 100644
--- a/sound/pci/hda/hda_generic.h
+++ b/sound/pci/hda/hda_generic.h
@@ -274,6 +274,7 @@
void (*init_hook)(struct hda_codec *codec);
void (*automute_hook)(struct hda_codec *codec);
void (*cap_sync_hook)(struct hda_codec *codec,
+ struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
/* PCM hooks */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index fa2879a..e354ab1 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -198,7 +198,7 @@
#endif
#if defined(CONFIG_PM) && defined(CONFIG_VGA_SWITCHEROO)
-#ifdef CONFIG_SND_HDA_CODEC_HDMI
+#if IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI)
#define SUPPORT_VGA_SWITCHEROO
#endif
#endif
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 7a426ed..df3652a 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -244,6 +244,19 @@
}
}
+/* Toshiba Satellite L40 implements EAPD in a standard way unlike others */
+static void ad1986a_fixup_eapd(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct ad198x_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ codec->inv_eapd = 0;
+ spec->gen.keep_eapd_on = 1;
+ spec->eapd_nid = 0x1b;
+ }
+}
+
enum {
AD1986A_FIXUP_INV_JACK_DETECT,
AD1986A_FIXUP_ULTRA,
@@ -251,6 +264,7 @@
AD1986A_FIXUP_3STACK,
AD1986A_FIXUP_LAPTOP,
AD1986A_FIXUP_LAPTOP_IMIC,
+ AD1986A_FIXUP_EAPD,
};
static const struct hda_fixup ad1986a_fixups[] = {
@@ -311,6 +325,10 @@
.chained_before = 1,
.chain_id = AD1986A_FIXUP_LAPTOP,
},
+ [AD1986A_FIXUP_EAPD] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = ad1986a_fixup_eapd,
+ },
};
static const struct snd_pci_quirk ad1986a_fixup_tbl[] = {
@@ -318,6 +336,7 @@
SND_PCI_QUIRK_MASK(0x1043, 0xff00, 0x8100, "ASUS P5", AD1986A_FIXUP_3STACK),
SND_PCI_QUIRK_MASK(0x1043, 0xff00, 0x8200, "ASUS M2", AD1986A_FIXUP_3STACK),
SND_PCI_QUIRK(0x10de, 0xcb84, "ASUS A8N-VM", AD1986A_FIXUP_3STACK),
+ SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba Satellite L40", AD1986A_FIXUP_EAPD),
SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_FIXUP_LAPTOP),
SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc000, "Samsung", AD1986A_FIXUP_SAMSUNG),
SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_FIXUP_ULTRA),
@@ -472,6 +491,8 @@
static int patch_ad1983(struct hda_codec *codec)
{
struct ad198x_spec *spec;
+ static hda_nid_t conn_0c[] = { 0x08 };
+ static hda_nid_t conn_0d[] = { 0x09 };
int err;
err = alloc_ad_spec(codec);
@@ -479,8 +500,14 @@
return err;
spec = codec->spec;
+ spec->gen.mixer_nid = 0x0e;
spec->gen.beep_nid = 0x10;
set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
+
+ /* limit the loopback routes not to confuse the parser */
+ snd_hda_override_conn_list(codec, 0x0c, ARRAY_SIZE(conn_0c), conn_0c);
+ snd_hda_override_conn_list(codec, 0x0d, ARRAY_SIZE(conn_0d), conn_0d);
+
err = ad198x_parse_auto_config(codec, false);
if (err < 0)
goto error;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 4e0ec146..bcf91be 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3291,7 +3291,8 @@
}
static void cxt_update_headset_mode_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
cxt_update_headset_mode(codec);
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 56a8f18..a9a83b8 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -708,7 +708,8 @@
}
static void alc_inv_dmic_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
alc_inv_dmic_sync(codec, false);
}
@@ -1821,6 +1822,7 @@
ALC889_FIXUP_IMAC91_VREF,
ALC889_FIXUP_MBA11_VREF,
ALC889_FIXUP_MBA21_VREF,
+ ALC889_FIXUP_MP11_VREF,
ALC882_FIXUP_INV_DMIC,
ALC882_FIXUP_NO_PRIMARY_HP,
ALC887_FIXUP_ASUS_BASS,
@@ -2190,6 +2192,12 @@
.chained = true,
.chain_id = ALC889_FIXUP_MBP_VREF,
},
+ [ALC889_FIXUP_MP11_VREF] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc889_fixup_mba11_vref,
+ .chained = true,
+ .chain_id = ALC885_FIXUP_MACPRO_GPIO,
+ },
[ALC882_FIXUP_INV_DMIC] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc_fixup_inv_dmic_0x12,
@@ -2253,7 +2261,7 @@
SND_PCI_QUIRK(0x106b, 0x00a0, "MacBookPro 3,1", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x00a1, "Macbook", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x00a4, "MacbookPro 4,1", ALC889_FIXUP_MBP_VREF),
- SND_PCI_QUIRK(0x106b, 0x0c00, "Mac Pro", ALC885_FIXUP_MACPRO_GPIO),
+ SND_PCI_QUIRK(0x106b, 0x0c00, "Mac Pro", ALC889_FIXUP_MP11_VREF),
SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_FIXUP_MACPRO_GPIO),
SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_FIXUP_MACPRO_GPIO),
SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC889_FIXUP_MBP_VREF),
@@ -3211,7 +3219,8 @@
/* turn on/off mic-mute LED per capture hook */
static void alc269_fixup_hp_gpio_mic_mute_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct alc_spec *spec = codec->spec;
unsigned int oldval = spec->gpio_led;
@@ -3521,7 +3530,8 @@
}
static void alc_update_headset_mode_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
alc_update_headset_mode(codec);
}
@@ -4322,6 +4332,7 @@
SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x8516, "ASUS X101CH", ALC269_FIXUP_ASUS_X101),
+ SND_PCI_QUIRK(0x104d, 0x90b5, "Sony VAIO Pro 11", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x104d, 0x90b6, "Sony VAIO Pro 13", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2),
SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
@@ -5096,6 +5107,7 @@
SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
SND_PCI_QUIRK(0x1028, 0x05d8, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x05db, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x060a, "Dell XPS 13", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0623, "Dell", ALC668_FIXUP_AUTO_MUTE),
SND_PCI_QUIRK(0x1028, 0x0624, "Dell", ALC668_FIXUP_AUTO_MUTE),
SND_PCI_QUIRK(0x1028, 0x0625, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 6998cf2..7311bad 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -194,7 +194,7 @@
int default_polarity;
unsigned int mic_mute_led_gpio; /* capture mute LED GPIO */
- bool mic_mute_led_on; /* current mic mute state */
+ unsigned int mic_enabled; /* current mic mute state (bitmask) */
/* stream */
unsigned int stream_delay;
@@ -324,19 +324,26 @@
/* hook for controlling mic-mute LED GPIO */
static void stac_capture_led_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct sigmatel_spec *spec = codec->spec;
- bool mute;
+ unsigned int mask;
+ bool cur_mute, prev_mute;
- if (!ucontrol)
+ if (!kcontrol || !ucontrol)
return;
- mute = !(ucontrol->value.integer.value[0] ||
- ucontrol->value.integer.value[1]);
- if (spec->mic_mute_led_on != mute) {
- spec->mic_mute_led_on = mute;
- if (mute)
+ mask = 1U << snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ prev_mute = !spec->mic_enabled;
+ if (ucontrol->value.integer.value[0] ||
+ ucontrol->value.integer.value[1])
+ spec->mic_enabled |= mask;
+ else
+ spec->mic_enabled &= ~mask;
+ cur_mute = !spec->mic_enabled;
+ if (cur_mute != prev_mute) {
+ if (cur_mute)
spec->gpio_data |= spec->mic_mute_led_gpio;
else
spec->gpio_data &= ~spec->mic_mute_led_gpio;
@@ -4462,7 +4469,7 @@
if (spec->mic_mute_led_gpio) {
spec->gpio_mask |= spec->mic_mute_led_gpio;
spec->gpio_dir |= spec->mic_mute_led_gpio;
- spec->mic_mute_led_on = true;
+ spec->mic_enabled = 0;
spec->gpio_data |= spec->mic_mute_led_gpio;
spec->gen.cap_sync_hook = stac_capture_led_hook;
diff --git a/sound/pci/hda/thinkpad_helper.c b/sound/pci/hda/thinkpad_helper.c
index 5799fbc..8fe3b8c 100644
--- a/sound/pci/hda/thinkpad_helper.c
+++ b/sound/pci/hda/thinkpad_helper.c
@@ -39,6 +39,7 @@
}
static void update_tpacpi_micmute_led(struct hda_codec *codec,
+ struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
if (!ucontrol || !led_set_func)
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index de9408b..e05a86b 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -14,6 +14,7 @@
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
+ select BITREVERSE
help
Say Y here to include support for USB audio and USB MIDI
devices.
diff --git a/tools/perf/builtin-buildid-cache.c b/tools/perf/builtin-buildid-cache.c
index cfede86..b22dbb1 100644
--- a/tools/perf/builtin-buildid-cache.c
+++ b/tools/perf/builtin-buildid-cache.c
@@ -63,11 +63,35 @@
return 0;
}
+static bool same_kallsyms_reloc(const char *from_dir, char *to_dir)
+{
+ char from[PATH_MAX];
+ char to[PATH_MAX];
+ const char *name;
+ u64 addr1 = 0, addr2 = 0;
+ int i;
+
+ scnprintf(from, sizeof(from), "%s/kallsyms", from_dir);
+ scnprintf(to, sizeof(to), "%s/kallsyms", to_dir);
+
+ for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) {
+ addr1 = kallsyms__get_function_start(from, name);
+ if (addr1)
+ break;
+ }
+
+ if (name)
+ addr2 = kallsyms__get_function_start(to, name);
+
+ return addr1 == addr2;
+}
+
static int build_id_cache__kcore_existing(const char *from_dir, char *to_dir,
size_t to_dir_sz)
{
char from[PATH_MAX];
char to[PATH_MAX];
+ char to_subdir[PATH_MAX];
struct dirent *dent;
int ret = -1;
DIR *d;
@@ -86,10 +110,11 @@
continue;
scnprintf(to, sizeof(to), "%s/%s/modules", to_dir,
dent->d_name);
- if (!compare_proc_modules(from, to)) {
- scnprintf(to, sizeof(to), "%s/%s", to_dir,
- dent->d_name);
- strlcpy(to_dir, to, to_dir_sz);
+ scnprintf(to_subdir, sizeof(to_subdir), "%s/%s",
+ to_dir, dent->d_name);
+ if (!compare_proc_modules(from, to) &&
+ same_kallsyms_reloc(from_dir, to_subdir)) {
+ strlcpy(to_dir, to_subdir, to_dir_sz);
ret = 0;
break;
}
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 3c394bf..af47531 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -287,10 +287,7 @@
* have no _text sometimes.
*/
err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
- machine, "_text");
- if (err < 0)
- err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
- machine, "_stext");
+ machine);
if (err < 0)
pr_err("Couldn't record guest kernel [%d]'s reference"
" relocation symbol.\n", machine->pid);
@@ -457,10 +454,7 @@
}
err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
- machine, "_text");
- if (err < 0)
- err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
- machine, "_stext");
+ machine);
if (err < 0)
pr_err("Couldn't record kernel reference relocation symbol\n"
"Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
diff --git a/tools/perf/design.txt b/tools/perf/design.txt
index 67e5d0c..63a0e6f 100644
--- a/tools/perf/design.txt
+++ b/tools/perf/design.txt
@@ -454,7 +454,6 @@
will need at least this:
- asm/perf_event.h - a basic stub will suffice at first
- support for atomic64 types (and associated helper functions)
- - set_perf_event_pending() implemented
If your architecture does have hardware capabilities, you can override the
weak stub hw_perf_event_init() to register hardware counters.
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 7daa806..e84fa26 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -100,8 +100,8 @@
#ifdef __aarch64__
#define mb() asm volatile("dmb ish" ::: "memory")
-#define wmb() asm volatile("dmb ishld" ::: "memory")
-#define rmb() asm volatile("dmb ishst" ::: "memory")
+#define wmb() asm volatile("dmb ishst" ::: "memory")
+#define rmb() asm volatile("dmb ishld" ::: "memory")
#define cpu_relax() asm volatile("yield" ::: "memory")
#endif
diff --git a/tools/perf/tests/vmlinux-kallsyms.c b/tools/perf/tests/vmlinux-kallsyms.c
index 2bd13ed..3d90880 100644
--- a/tools/perf/tests/vmlinux-kallsyms.c
+++ b/tools/perf/tests/vmlinux-kallsyms.c
@@ -26,7 +26,6 @@
struct map *kallsyms_map, *vmlinux_map;
struct machine kallsyms, vmlinux;
enum map_type type = MAP__FUNCTION;
- struct ref_reloc_sym ref_reloc_sym = { .name = "_stext", };
u64 mem_start, mem_end;
/*
@@ -70,14 +69,6 @@
*/
kallsyms_map = machine__kernel_map(&kallsyms, type);
- sym = map__find_symbol_by_name(kallsyms_map, ref_reloc_sym.name, NULL);
- if (sym == NULL) {
- pr_debug("dso__find_symbol_by_name ");
- goto out;
- }
-
- ref_reloc_sym.addr = UM(sym->start);
-
/*
* Step 5:
*
@@ -89,7 +80,6 @@
}
vmlinux_map = machine__kernel_map(&vmlinux, type);
- map__kmap(vmlinux_map)->ref_reloc_sym = &ref_reloc_sym;
/*
* Step 6:
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 1fc1c2f..b0f3ca8 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -470,23 +470,32 @@
return 1;
}
+u64 kallsyms__get_function_start(const char *kallsyms_filename,
+ const char *symbol_name)
+{
+ struct process_symbol_args args = { .name = symbol_name, };
+
+ if (kallsyms__parse(kallsyms_filename, &args, find_symbol_cb) <= 0)
+ return 0;
+
+ return args.start;
+}
+
int perf_event__synthesize_kernel_mmap(struct perf_tool *tool,
perf_event__handler_t process,
- struct machine *machine,
- const char *symbol_name)
+ struct machine *machine)
{
size_t size;
- const char *filename, *mmap_name;
- char path[PATH_MAX];
+ const char *mmap_name;
char name_buff[PATH_MAX];
struct map *map;
+ struct kmap *kmap;
int err;
/*
* We should get this from /sys/kernel/sections/.text, but till that is
* available use this, and after it is use this as a fallback for older
* kernels.
*/
- struct process_symbol_args args = { .name = symbol_name, };
union perf_event *event = zalloc((sizeof(event->mmap) +
machine->id_hdr_size));
if (event == NULL) {
@@ -502,30 +511,19 @@
* see kernel/perf_event.c __perf_event_mmap
*/
event->header.misc = PERF_RECORD_MISC_KERNEL;
- filename = "/proc/kallsyms";
} else {
event->header.misc = PERF_RECORD_MISC_GUEST_KERNEL;
- if (machine__is_default_guest(machine))
- filename = (char *) symbol_conf.default_guest_kallsyms;
- else {
- sprintf(path, "%s/proc/kallsyms", machine->root_dir);
- filename = path;
- }
- }
-
- if (kallsyms__parse(filename, &args, find_symbol_cb) <= 0) {
- free(event);
- return -ENOENT;
}
map = machine->vmlinux_maps[MAP__FUNCTION];
+ kmap = map__kmap(map);
size = snprintf(event->mmap.filename, sizeof(event->mmap.filename),
- "%s%s", mmap_name, symbol_name) + 1;
+ "%s%s", mmap_name, kmap->ref_reloc_sym->name) + 1;
size = PERF_ALIGN(size, sizeof(u64));
event->mmap.header.type = PERF_RECORD_MMAP;
event->mmap.header.size = (sizeof(event->mmap) -
(sizeof(event->mmap.filename) - size) + machine->id_hdr_size);
- event->mmap.pgoff = args.start;
+ event->mmap.pgoff = kmap->ref_reloc_sym->addr;
event->mmap.start = map->start;
event->mmap.len = map->end - event->mmap.start;
event->mmap.pid = machine->pid;
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index faf6e21..851fa06 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -214,8 +214,7 @@
struct machine *machine, bool mmap_data);
int perf_event__synthesize_kernel_mmap(struct perf_tool *tool,
perf_event__handler_t process,
- struct machine *machine,
- const char *symbol_name);
+ struct machine *machine);
int perf_event__synthesize_modules(struct perf_tool *tool,
perf_event__handler_t process,
@@ -279,4 +278,7 @@
size_t perf_event__fprintf_task(union perf_event *event, FILE *fp);
size_t perf_event__fprintf(union perf_event *event, FILE *fp);
+u64 kallsyms__get_function_start(const char *kallsyms_filename,
+ const char *symbol_name);
+
#endif /* __PERF_RECORD_H */
diff --git a/tools/perf/util/include/asm/hash.h b/tools/perf/util/include/asm/hash.h
new file mode 100644
index 0000000..d82b170b
--- /dev/null
+++ b/tools/perf/util/include/asm/hash.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_GENERIC_HASH_H
+#define __ASM_GENERIC_HASH_H
+
+/* Stub */
+
+#endif /* __ASM_GENERIC_HASH_H */
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index ded7459..c872991 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -496,19 +496,22 @@
return 1;
}
+static void machine__get_kallsyms_filename(struct machine *machine, char *buf,
+ size_t bufsz)
+{
+ if (machine__is_default_guest(machine))
+ scnprintf(buf, bufsz, "%s", symbol_conf.default_guest_kallsyms);
+ else
+ scnprintf(buf, bufsz, "%s/proc/kallsyms", machine->root_dir);
+}
+
/* Figure out the start address of kernel map from /proc/kallsyms */
static u64 machine__get_kernel_start_addr(struct machine *machine)
{
- const char *filename;
- char path[PATH_MAX];
+ char filename[PATH_MAX];
struct process_args args;
- if (machine__is_default_guest(machine))
- filename = (char *)symbol_conf.default_guest_kallsyms;
- else {
- sprintf(path, "%s/proc/kallsyms", machine->root_dir);
- filename = path;
- }
+ machine__get_kallsyms_filename(machine, filename, PATH_MAX);
if (symbol__restricted_filename(filename, "/proc/kallsyms"))
return 0;
@@ -829,9 +832,25 @@
return 0;
}
+const char *ref_reloc_sym_names[] = {"_text", "_stext", NULL};
+
int machine__create_kernel_maps(struct machine *machine)
{
struct dso *kernel = machine__get_kernel(machine);
+ char filename[PATH_MAX];
+ const char *name;
+ u64 addr = 0;
+ int i;
+
+ machine__get_kallsyms_filename(machine, filename, PATH_MAX);
+
+ for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) {
+ addr = kallsyms__get_function_start(filename, name);
+ if (addr)
+ break;
+ }
+ if (!addr)
+ return -1;
if (kernel == NULL ||
__machine__create_kernel_maps(machine, kernel) < 0)
@@ -850,6 +869,13 @@
* Now that we have all the maps created, just set the ->end of them:
*/
map_groups__fixup_end(&machine->kmaps);
+
+ if (maps__set_kallsyms_ref_reloc_sym(machine->vmlinux_maps, name,
+ addr)) {
+ machine__destroy_kernel_maps(machine);
+ return -1;
+ }
+
return 0;
}
diff --git a/tools/perf/util/machine.h b/tools/perf/util/machine.h
index 4771330..f77e91e 100644
--- a/tools/perf/util/machine.h
+++ b/tools/perf/util/machine.h
@@ -18,6 +18,8 @@
#define HOST_KERNEL_ID (-1)
#define DEFAULT_GUEST_KERNEL_ID (0)
+extern const char *ref_reloc_sym_names[];
+
struct machine {
struct rb_node rb_node;
pid_t pid;
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 3b97513..39cd2d0 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -39,6 +39,7 @@
map->start = start;
map->end = end;
map->pgoff = pgoff;
+ map->reloc = 0;
map->dso = dso;
map->map_ip = map__map_ip;
map->unmap_ip = map__unmap_ip;
@@ -288,7 +289,7 @@
if (map->dso->rel)
return rip - map->pgoff;
- return map->unmap_ip(map, rip);
+ return map->unmap_ip(map, rip) - map->reloc;
}
/**
@@ -311,7 +312,7 @@
if (map->dso->rel)
return map->unmap_ip(map, ip + map->pgoff);
- return ip;
+ return ip + map->reloc;
}
void map_groups__init(struct map_groups *mg)
diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h
index 18068c6..257e513 100644
--- a/tools/perf/util/map.h
+++ b/tools/perf/util/map.h
@@ -36,6 +36,7 @@
bool erange_warned;
u32 priv;
u64 pgoff;
+ u64 reloc;
u32 maj, min; /* only valid for MMAP2 record */
u64 ino; /* only valid for MMAP2 record */
u64 ino_generation;/* only valid for MMAP2 record */
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 7594567..3e9f336 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -751,6 +751,8 @@
if (strcmp(elf_name, kmap->ref_reloc_sym->name))
continue;
kmap->ref_reloc_sym->unrelocated_addr = sym.st_value;
+ map->reloc = kmap->ref_reloc_sym->addr -
+ kmap->ref_reloc_sym->unrelocated_addr;
break;
}
}
@@ -922,6 +924,7 @@
(u64)shdr.sh_offset);
sym.st_value -= shdr.sh_addr - shdr.sh_offset;
}
+new_symbol:
/*
* We need to figure out if the object was created from C++ sources
* DWARF DW_compile_unit has this, but we don't always have access
@@ -933,7 +936,6 @@
if (demangled != NULL)
elf_name = demangled;
}
-new_symbol:
f = symbol__new(sym.st_value, sym.st_size,
GELF_ST_BIND(sym.st_info), elf_name);
free(demangled);
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 39ce9ad..a9d758a 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -627,7 +627,7 @@
* kernel range is broken in several maps, named [kernel].N, as we don't have
* the original ELF section names vmlinux have.
*/
-static int dso__split_kallsyms(struct dso *dso, struct map *map,
+static int dso__split_kallsyms(struct dso *dso, struct map *map, u64 delta,
symbol_filter_t filter)
{
struct map_groups *kmaps = map__kmap(map)->kmaps;
@@ -692,6 +692,12 @@
char dso_name[PATH_MAX];
struct dso *ndso;
+ if (delta) {
+ /* Kernel was relocated at boot time */
+ pos->start -= delta;
+ pos->end -= delta;
+ }
+
if (count == 0) {
curr_map = map;
goto filter_symbol;
@@ -721,6 +727,10 @@
curr_map->map_ip = curr_map->unmap_ip = identity__map_ip;
map_groups__insert(kmaps, curr_map);
++kernel_range;
+ } else if (delta) {
+ /* Kernel was relocated at boot time */
+ pos->start -= delta;
+ pos->end -= delta;
}
filter_symbol:
if (filter && filter(curr_map, pos)) {
@@ -976,6 +986,23 @@
return 0;
}
+static int validate_kcore_addresses(const char *kallsyms_filename,
+ struct map *map)
+{
+ struct kmap *kmap = map__kmap(map);
+
+ if (kmap->ref_reloc_sym && kmap->ref_reloc_sym->name) {
+ u64 start;
+
+ start = kallsyms__get_function_start(kallsyms_filename,
+ kmap->ref_reloc_sym->name);
+ if (start != kmap->ref_reloc_sym->addr)
+ return -EINVAL;
+ }
+
+ return validate_kcore_modules(kallsyms_filename, map);
+}
+
struct kcore_mapfn_data {
struct dso *dso;
enum map_type type;
@@ -1019,8 +1046,8 @@
kallsyms_filename))
return -EINVAL;
- /* All modules must be present at their original addresses */
- if (validate_kcore_modules(kallsyms_filename, map))
+ /* Modules and kernel must be present at their original addresses */
+ if (validate_kcore_addresses(kallsyms_filename, map))
return -EINVAL;
md.dso = dso;
@@ -1113,15 +1140,41 @@
return -EINVAL;
}
+/*
+ * If the kernel is relocated at boot time, kallsyms won't match. Compute the
+ * delta based on the relocation reference symbol.
+ */
+static int kallsyms__delta(struct map *map, const char *filename, u64 *delta)
+{
+ struct kmap *kmap = map__kmap(map);
+ u64 addr;
+
+ if (!kmap->ref_reloc_sym || !kmap->ref_reloc_sym->name)
+ return 0;
+
+ addr = kallsyms__get_function_start(filename,
+ kmap->ref_reloc_sym->name);
+ if (!addr)
+ return -1;
+
+ *delta = addr - kmap->ref_reloc_sym->addr;
+ return 0;
+}
+
int dso__load_kallsyms(struct dso *dso, const char *filename,
struct map *map, symbol_filter_t filter)
{
+ u64 delta = 0;
+
if (symbol__restricted_filename(filename, "/proc/kallsyms"))
return -1;
if (dso__load_all_kallsyms(dso, filename, map) < 0)
return -1;
+ if (kallsyms__delta(map, filename, &delta))
+ return -1;
+
symbols__fixup_duplicate(&dso->symbols[map->type]);
symbols__fixup_end(&dso->symbols[map->type]);
@@ -1133,7 +1186,7 @@
if (!dso__load_kcore(dso, map, filename))
return dso__split_kallsyms_for_kcore(dso, map, filter);
else
- return dso__split_kallsyms(dso, map, filter);
+ return dso__split_kallsyms(dso, map, delta, filter);
}
static int dso__load_perf_map(struct dso *dso, struct map *map,
@@ -1424,7 +1477,7 @@
continue;
scnprintf(kallsyms_filename, sizeof(kallsyms_filename),
"%s/%s/kallsyms", dir, dent->d_name);
- if (!validate_kcore_modules(kallsyms_filename, map)) {
+ if (!validate_kcore_addresses(kallsyms_filename, map)) {
strlcpy(dir, kallsyms_filename, dir_sz);
ret = 0;
break;
@@ -1479,7 +1532,7 @@
if (fd != -1) {
close(fd);
/* If module maps match go with /proc/kallsyms */
- if (!validate_kcore_modules("/proc/kallsyms", map))
+ if (!validate_kcore_addresses("/proc/kallsyms", map))
goto proc_kallsyms;
}
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index be456ce..8ca405c 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -24,6 +24,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/uaccess.h>
#include <linux/irqchip/arm-gic.h>
diff --git a/virt/kvm/coalesced_mmio.c b/virt/kvm/coalesced_mmio.c
index 88b2fe3..00d8642 100644
--- a/virt/kvm/coalesced_mmio.c
+++ b/virt/kvm/coalesced_mmio.c
@@ -154,17 +154,13 @@
list_add_tail(&dev->list, &kvm->coalesced_zones);
mutex_unlock(&kvm->slots_lock);
- return ret;
+ return 0;
out_free_dev:
mutex_unlock(&kvm->slots_lock);
-
kfree(dev);
- if (dev == NULL)
- return -ENXIO;
-
- return 0;
+ return ret;
}
int kvm_vm_ioctl_unregister_coalesced_mmio(struct kvm *kvm,