diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 23f4db0..969ff83 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -328,6 +328,10 @@
 
     Module for sound cards based on C-Media CMI8330 ISA chips.
 
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     wssport	- port # for CMI8330 chip (WSS)
     wssirq	- IRQ # for CMI8330 chip (WSS)
     wssdma	- first DMA # for CMI8330 chip (WSS)
@@ -382,6 +386,10 @@
 
     Module for sound cards based on CS4232/CS4232A ISA chips.
 
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     port	- port # for CS4232 chip (PnP setup - 0x534)
     cport	- control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
     mpu_port	- port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
@@ -390,10 +398,10 @@
     mpu_irq	- IRQ # for MPU-401 UART (9,11,12,15)
     dma1	- first DMA # for CS4232 chip (0,1,3)
     dma2	- second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
     
     This module supports multiple cards. This module does not support autoprobe
-    thus main port must be specified!!! Other ports are optional.
+    (if ISA PnP is not used) thus main port must be specified!!! Other ports are
+    optional.
 
     The power-management is supported.
     
@@ -403,6 +411,10 @@
     Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
                                    CS4238B/CS4239 ISA chips.
 
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     port	- port # for CS4236 chip (PnP setup - 0x534)
     cport	- control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
     mpu_port	- port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
@@ -411,7 +423,6 @@
     mpu_irq	- IRQ # for MPU-401 UART (9,11,12,15)
     dma1	- first DMA # for CS4236 chip (0,1,3)
     dma2	- second DMA # for CS4236 chip (0,1,3), -1 = disable
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
     
     This module supports multiple cards. This module does not support autoprobe
     (if ISA PnP is not used) thus main port and control port must be
@@ -600,13 +611,16 @@
 
     Module for ESS AudioDrive ES-18xx sound cards.
 
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     port	- port # for ES-18xx chip (0x220,0x240,0x260)
     mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
     fm_port	- port # for FM (optional, not used)
     irq		- IRQ # for ES-18xx chip (5,7,9,10)
     dma1	- first DMA # for ES-18xx chip (0,1,3)
     dma2	- first DMA # for ES-18xx chip (0,1,3)
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
 
     This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
     port if native ISA PnP routines are not used).
@@ -1230,15 +1244,19 @@
     Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
     and other sound cards based on AMD InterWave (tm) chip.
   
-    port	- port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
-    irq		- IRQ # for InterWave chip (3,5,9,11,12,15)
-    dma1	- DMA # for InterWave chip (0,1,3,5,6,7)
-    dma2	- DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
     joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
     midi	- 1 = MIDI UART enable, 0 = MIDI UART disable (default)
     pcm_voices	- reserved PCM voices for the synthesizer (default 2)
     effect	- 1 = InterWave effects enable (default 0);
                   requires 8 voices
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
+    port	- port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
+    irq		- IRQ # for InterWave chip (3,5,9,11,12,15)
+    dma1	- DMA # for InterWave chip (0,1,3,5,6,7)
+    dma2	- DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
 
     This module supports multiple cards, autoprobe and ISA PnP.
 
@@ -1249,16 +1267,20 @@
     and other sound cards based on AMD InterWave (tm) chip with TEA6330T
     circuit for extended control of bass, treble and master volume.
   
-    port	- port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
-    port_tc	- tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
-    irq		- IRQ # for InterWave chip (3,5,9,11,12,15)
-    dma1	- DMA # for InterWave chip (0,1,3,5,6,7)
-    dma2	- DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
     joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
     midi	- 1 = MIDI UART enable, 0 = MIDI UART disable (default)
     pcm_voices	- reserved PCM voices for the synthesizer (default 2)
     effect	- 1 = InterWave effects enable (default 0);
                   requires 8 voices
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
+    port	- port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
+    port_tc	- tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
+    irq		- IRQ # for InterWave chip (3,5,9,11,12,15)
+    dma1	- DMA # for InterWave chip (0,1,3,5,6,7)
+    dma2	- DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
 
     This module supports multiple cards, autoprobe and ISA PnP.
 
@@ -1446,6 +1468,10 @@
 
     Module for Yamaha OPL3-SA2/SA3 sound cards.
 
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     port	- control port # for OPL3-SA chip (0x370)
     sb_port	- SB port # for OPL3-SA chip (0x220,0x240)
     wss_port	- WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
@@ -1454,7 +1480,6 @@
     irq		- IRQ # for OPL3-SA chip (5,7,9,10)
     dma1	- first DMA # for Yamaha OPL3-SA chip (0,1,3)
     dma2	- second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
     
     This module supports multiple cards and ISA PnP.  It does not support
     autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
@@ -1467,6 +1492,10 @@
     Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips.
     Module works with OAK Mozart cards as well.
     
+    isapnp    - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     port      - port # for WSS chip (0x530,0xe80,0xf40,0x604)
     mpu_port  - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
     fm_port   - port # for OPL3 device (0x388)
@@ -1481,6 +1510,10 @@
 
     Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips.
     
+    isapnp    - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     port      - port # for WSS chip (0x530,0xe80,0xf40,0x604)
     mpu_port  - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
     fm_port   - port # for OPL3 device (0x388)
@@ -1496,6 +1529,10 @@
 
     Module for sound cards based on OPTi 82c93x chips.
     
+    isapnp    - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     port      - port # for WSS chip (0x530,0xe80,0xf40,0x604)
     mpu_port  - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
     fm_port   - port # for OPL3 device (0x388)
@@ -1620,6 +1657,12 @@
 					  SoundBlaster AWE 32 (PnP),
 					  SoundBlaster AWE 64 PnP
 
+    mic_agc	- Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
+    csp		- ASP/CSP chip support - 0 = disable (default), 1 = enable
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     port	- port # for SB DSP 4.x chip (0x220,0x240,0x260)
     mpu_port	- port # for MPU-401 UART (0x300,0x330), -1 = disable
     awe_port	- base port # for EMU8000 synthesizer (0x620,0x640,0x660)
@@ -1627,9 +1670,6 @@
     irq		- IRQ # for SB DSP 4.x chip (5,7,9,10)
     dma8	- 8-bit DMA # for SB DSP 4.x chip (0,1,3)
     dma16	- 16-bit DMA # for SB DSP 4.x chip (5,6,7)
-    mic_agc	- Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
-    csp		- ASP/CSP chip support - 0 = disable (default), 1 = enable
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
     
     This module supports multiple cards, autoprobe and ISA PnP.
 
@@ -1712,18 +1752,21 @@
 
     Module for Turtle Beach Maui, Tropez and Tropez+ sound cards.
 
+    use_cs4232_midi - Use CS4232 MPU-401 interface
+                      (inaccessibly located inside your computer)
+    isapnp          - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
     cs4232_pcm_port - Port # for CS4232 PCM interface.
     cs4232_pcm_irq  - IRQ # for CS4232 PCM interface (5,7,9,11,12,15).
     cs4232_mpu_port - Port # for CS4232 MPU-401 interface.
     cs4232_mpu_irq  - IRQ # for CS4232 MPU-401 interface (9,11,12,15).
-    use_cs4232_midi - Use CS4232 MPU-401 interface
-                      (inaccessibly located inside your computer)
     ics2115_port    - Port # for ICS2115
     ics2115_irq     - IRQ # for ICS2115
     fm_port         - FM OPL-3 Port #
     dma1            - DMA1 # for CS4232 PCM interface.
     dma2            - DMA2 # for CS4232 PCM interface.
-    isapnp          - ISA PnP detection - 0 = disable, 1 = enable (default)
 
     The below are options for wavefront_synth features:
     wf_raw	    - Assume that we need to boot the OS (default:no)