| /* |
| * Stuff used by all variants of the driver |
| * |
| * Copyright (c) 2001 by Stefan Eilers, |
| * Hansjoerg Lipp <hjlipp@web.de>, |
| * Tilman Schmidt <tilman@imap.cc>. |
| * |
| * ===================================================================== |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * ===================================================================== |
| */ |
| |
| #include "gigaset.h" |
| #include <linux/isdnif.h> |
| |
| #define SBUFSIZE 4096 /* sk_buff payload size */ |
| #define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */ |
| #define HW_HDR_LEN 2 /* Header size used to store ack info */ |
| #define MAX_BUF_SIZE (SBUFSIZE - HW_HDR_LEN) /* max data packet from LL */ |
| |
| /* == Handling of I4L IO =====================================================*/ |
| |
| /* writebuf_from_LL |
| * called by LL to transmit data on an open channel |
| * inserts the buffer data into the send queue and starts the transmission |
| * Note that this operation must not sleep! |
| * When the buffer is processed completely, gigaset_skb_sent() should be called. |
| * parameters: |
| * driverID driver ID as assigned by LL |
| * channel channel number |
| * ack if != 0 LL wants to be notified on completion via |
| * statcallb(ISDN_STAT_BSENT) |
| * skb skb containing data to send |
| * return value: |
| * number of accepted bytes |
| * 0 if temporarily unable to accept data (out of buffer space) |
| * <0 on error (eg. -EINVAL) |
| */ |
| static int writebuf_from_LL(int driverID, int channel, int ack, |
| struct sk_buff *skb) |
| { |
| struct cardstate *cs = gigaset_get_cs_by_id(driverID); |
| struct bc_state *bcs; |
| unsigned char *ack_header; |
| unsigned len; |
| |
| if (!cs) { |
| pr_err("%s: invalid driver ID (%d)\n", __func__, driverID); |
| return -ENODEV; |
| } |
| if (channel < 0 || channel >= cs->channels) { |
| dev_err(cs->dev, "%s: invalid channel ID (%d)\n", |
| __func__, channel); |
| return -ENODEV; |
| } |
| bcs = &cs->bcs[channel]; |
| |
| /* can only handle linear sk_buffs */ |
| if (skb_linearize(skb) < 0) { |
| dev_err(cs->dev, "%s: skb_linearize failed\n", __func__); |
| return -ENOMEM; |
| } |
| len = skb->len; |
| |
| gig_dbg(DEBUG_LLDATA, |
| "Receiving data from LL (id: %d, ch: %d, ack: %d, sz: %d)", |
| driverID, channel, ack, len); |
| |
| if (!len) { |
| if (ack) |
| dev_notice(cs->dev, "%s: not ACKing empty packet\n", |
| __func__); |
| return 0; |
| } |
| if (len > MAX_BUF_SIZE) { |
| dev_err(cs->dev, "%s: packet too large (%d bytes)\n", |
| __func__, len); |
| return -EINVAL; |
| } |
| |
| /* set up acknowledgement header */ |
| if (skb_headroom(skb) < HW_HDR_LEN) { |
| /* should never happen */ |
| dev_err(cs->dev, "%s: insufficient skb headroom\n", __func__); |
| return -ENOMEM; |
| } |
| skb_set_mac_header(skb, -HW_HDR_LEN); |
| skb->mac_len = HW_HDR_LEN; |
| ack_header = skb_mac_header(skb); |
| if (ack) { |
| ack_header[0] = len & 0xff; |
| ack_header[1] = len >> 8; |
| } else { |
| ack_header[0] = ack_header[1] = 0; |
| } |
| gig_dbg(DEBUG_MCMD, "skb: len=%u, ack=%d: %02x %02x", |
| len, ack, ack_header[0], ack_header[1]); |
| |
| /* pass to device-specific module */ |
| return cs->ops->send_skb(bcs, skb); |
| } |
| |
| /** |
| * gigaset_skb_sent() - acknowledge sending an skb |
| * @bcs: B channel descriptor structure. |
| * @skb: sent data. |
| * |
| * Called by hardware module {bas,ser,usb}_gigaset when the data in a |
| * skb has been successfully sent, for signalling completion to the LL. |
| */ |
| void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb) |
| { |
| isdn_if *iif = bcs->cs->iif; |
| unsigned char *ack_header = skb_mac_header(skb); |
| unsigned len; |
| isdn_ctrl response; |
| |
| ++bcs->trans_up; |
| |
| if (skb->len) |
| dev_warn(bcs->cs->dev, "%s: skb->len==%d\n", |
| __func__, skb->len); |
| |
| len = ack_header[0] + ((unsigned) ack_header[1] << 8); |
| if (len) { |
| gig_dbg(DEBUG_MCMD, "ACKing to LL (id: %d, ch: %d, sz: %u)", |
| bcs->cs->myid, bcs->channel, len); |
| |
| response.driver = bcs->cs->myid; |
| response.command = ISDN_STAT_BSENT; |
| response.arg = bcs->channel; |
| response.parm.length = len; |
| iif->statcallb(&response); |
| } |
| } |
| EXPORT_SYMBOL_GPL(gigaset_skb_sent); |
| |
| /** |
| * gigaset_skb_rcvd() - pass received skb to LL |
| * @bcs: B channel descriptor structure. |
| * @skb: received data. |
| * |
| * Called by hardware module {bas,ser,usb}_gigaset when user data has |
| * been successfully received, for passing to the LL. |
| * Warning: skb must not be accessed anymore! |
| */ |
| void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb) |
| { |
| isdn_if *iif = bcs->cs->iif; |
| |
| iif->rcvcallb_skb(bcs->cs->myid, bcs->channel, skb); |
| bcs->trans_down++; |
| } |
| EXPORT_SYMBOL_GPL(gigaset_skb_rcvd); |
| |
| /** |
| * gigaset_isdn_rcv_err() - signal receive error |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by hardware module {bas,ser,usb}_gigaset when a receive error |
| * has occurred, for signalling to the LL. |
| */ |
| void gigaset_isdn_rcv_err(struct bc_state *bcs) |
| { |
| isdn_if *iif = bcs->cs->iif; |
| isdn_ctrl response; |
| |
| /* if currently ignoring packets, just count down */ |
| if (bcs->ignore) { |
| bcs->ignore--; |
| return; |
| } |
| |
| /* update statistics */ |
| bcs->corrupted++; |
| |
| /* error -> LL */ |
| gig_dbg(DEBUG_CMD, "sending L1ERR"); |
| response.driver = bcs->cs->myid; |
| response.command = ISDN_STAT_L1ERR; |
| response.arg = bcs->channel; |
| response.parm.errcode = ISDN_STAT_L1ERR_RECV; |
| iif->statcallb(&response); |
| } |
| EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err); |
| |
| /* This function will be called by LL to send commands |
| * NOTE: LL ignores the returned value, for commands other than ISDN_CMD_IOCTL, |
| * so don't put too much effort into it. |
| */ |
| static int command_from_LL(isdn_ctrl *cntrl) |
| { |
| struct cardstate *cs; |
| struct bc_state *bcs; |
| int retval = 0; |
| char **commands; |
| int ch; |
| int i; |
| size_t l; |
| |
| gigaset_debugdrivers(); |
| |
| gig_dbg(DEBUG_CMD, "driver: %d, command: %d, arg: 0x%lx", |
| cntrl->driver, cntrl->command, cntrl->arg); |
| |
| cs = gigaset_get_cs_by_id(cntrl->driver); |
| if (cs == NULL) { |
| pr_err("%s: invalid driver ID (%d)\n", __func__, cntrl->driver); |
| return -ENODEV; |
| } |
| ch = cntrl->arg & 0xff; |
| |
| switch (cntrl->command) { |
| case ISDN_CMD_IOCTL: |
| dev_warn(cs->dev, "ISDN_CMD_IOCTL not supported\n"); |
| return -EINVAL; |
| |
| case ISDN_CMD_DIAL: |
| gig_dbg(DEBUG_CMD, |
| "ISDN_CMD_DIAL (phone: %s, msn: %s, si1: %d, si2: %d)", |
| cntrl->parm.setup.phone, cntrl->parm.setup.eazmsn, |
| cntrl->parm.setup.si1, cntrl->parm.setup.si2); |
| |
| if (ch >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_DIAL: invalid channel (%d)\n", ch); |
| return -EINVAL; |
| } |
| bcs = cs->bcs + ch; |
| if (!gigaset_get_channel(bcs)) { |
| dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n"); |
| return -EBUSY; |
| } |
| switch (bcs->proto2) { |
| case L2_HDLC: |
| bcs->rx_bufsize = SBUFSIZE; |
| break; |
| default: /* assume transparent */ |
| bcs->rx_bufsize = TRANSBUFSIZE; |
| } |
| dev_kfree_skb(bcs->rx_skb); |
| gigaset_new_rx_skb(bcs); |
| |
| commands = kzalloc(AT_NUM*(sizeof *commands), GFP_ATOMIC); |
| if (!commands) { |
| gigaset_free_channel(bcs); |
| dev_err(cs->dev, "ISDN_CMD_DIAL: out of memory\n"); |
| return -ENOMEM; |
| } |
| |
| l = 3 + strlen(cntrl->parm.setup.phone); |
| commands[AT_DIAL] = kmalloc(l, GFP_ATOMIC); |
| if (!commands[AT_DIAL]) |
| goto oom; |
| if (cntrl->parm.setup.phone[0] == '*' && |
| cntrl->parm.setup.phone[1] == '*') { |
| /* internal call: translate ** prefix to CTP value */ |
| commands[AT_TYPE] = kstrdup("^SCTP=0\r", GFP_ATOMIC); |
| if (!commands[AT_TYPE]) |
| goto oom; |
| snprintf(commands[AT_DIAL], l, |
| "D%s\r", cntrl->parm.setup.phone+2); |
| } else { |
| commands[AT_TYPE] = kstrdup("^SCTP=1\r", GFP_ATOMIC); |
| if (!commands[AT_TYPE]) |
| goto oom; |
| snprintf(commands[AT_DIAL], l, |
| "D%s\r", cntrl->parm.setup.phone); |
| } |
| |
| l = strlen(cntrl->parm.setup.eazmsn); |
| if (l) { |
| l += 8; |
| commands[AT_MSN] = kmalloc(l, GFP_ATOMIC); |
| if (!commands[AT_MSN]) |
| goto oom; |
| snprintf(commands[AT_MSN], l, "^SMSN=%s\r", |
| cntrl->parm.setup.eazmsn); |
| } |
| |
| switch (cntrl->parm.setup.si1) { |
| case 1: /* audio */ |
| /* BC = 9090A3: 3.1 kHz audio, A-law */ |
| commands[AT_BC] = kstrdup("^SBC=9090A3\r", GFP_ATOMIC); |
| if (!commands[AT_BC]) |
| goto oom; |
| break; |
| case 7: /* data */ |
| default: /* hope the app knows what it is doing */ |
| /* BC = 8890: unrestricted digital information */ |
| commands[AT_BC] = kstrdup("^SBC=8890\r", GFP_ATOMIC); |
| if (!commands[AT_BC]) |
| goto oom; |
| } |
| /* ToDo: other si1 values, inspect si2, set HLC/LLC */ |
| |
| commands[AT_PROTO] = kmalloc(9, GFP_ATOMIC); |
| if (!commands[AT_PROTO]) |
| goto oom; |
| snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2); |
| |
| commands[AT_ISO] = kmalloc(9, GFP_ATOMIC); |
| if (!commands[AT_ISO]) |
| goto oom; |
| snprintf(commands[AT_ISO], 9, "^SISO=%u\r", |
| (unsigned) bcs->channel + 1); |
| |
| if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands, |
| bcs->at_state.seq_index, NULL)) { |
| for (i = 0; i < AT_NUM; ++i) |
| kfree(commands[i]); |
| kfree(commands); |
| gigaset_free_channel(bcs); |
| return -ENOMEM; |
| } |
| gigaset_schedule_event(cs); |
| break; |
| case ISDN_CMD_ACCEPTD: |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_ACCEPTD"); |
| if (ch >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_ACCEPTD: invalid channel (%d)\n", ch); |
| return -EINVAL; |
| } |
| bcs = cs->bcs + ch; |
| switch (bcs->proto2) { |
| case L2_HDLC: |
| bcs->rx_bufsize = SBUFSIZE; |
| break; |
| default: /* assume transparent */ |
| bcs->rx_bufsize = TRANSBUFSIZE; |
| } |
| dev_kfree_skb(bcs->rx_skb); |
| gigaset_new_rx_skb(bcs); |
| if (!gigaset_add_event(cs, &bcs->at_state, |
| EV_ACCEPT, NULL, 0, NULL)) |
| return -ENOMEM; |
| gigaset_schedule_event(cs); |
| |
| break; |
| case ISDN_CMD_HANGUP: |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_HANGUP"); |
| if (ch >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_HANGUP: invalid channel (%d)\n", ch); |
| return -EINVAL; |
| } |
| bcs = cs->bcs + ch; |
| if (!gigaset_add_event(cs, &bcs->at_state, |
| EV_HUP, NULL, 0, NULL)) |
| return -ENOMEM; |
| gigaset_schedule_event(cs); |
| |
| break; |
| case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */ |
| dev_info(cs->dev, "ignoring ISDN_CMD_CLREAZ\n"); |
| break; |
| case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */ |
| dev_info(cs->dev, "ignoring ISDN_CMD_SETEAZ (%s)\n", |
| cntrl->parm.num); |
| break; |
| case ISDN_CMD_SETL2: /* Set L2 to given protocol */ |
| if (ch >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_SETL2: invalid channel (%d)\n", ch); |
| return -EINVAL; |
| } |
| bcs = cs->bcs + ch; |
| if (bcs->chstate & CHS_D_UP) { |
| dev_err(cs->dev, |
| "ISDN_CMD_SETL2: channel active (%d)\n", ch); |
| return -EINVAL; |
| } |
| switch (cntrl->arg >> 8) { |
| case ISDN_PROTO_L2_HDLC: |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_HDLC"); |
| bcs->proto2 = L2_HDLC; |
| break; |
| case ISDN_PROTO_L2_TRANS: |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_VOICE"); |
| bcs->proto2 = L2_VOICE; |
| break; |
| default: |
| dev_err(cs->dev, |
| "ISDN_CMD_SETL2: unsupported protocol (%lu)\n", |
| cntrl->arg >> 8); |
| return -EINVAL; |
| } |
| break; |
| case ISDN_CMD_SETL3: /* Set L3 to given protocol */ |
| gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL3"); |
| if (ch >= cs->channels) { |
| dev_err(cs->dev, |
| "ISDN_CMD_SETL3: invalid channel (%d)\n", ch); |
| return -EINVAL; |
| } |
| |
| if (cntrl->arg >> 8 != ISDN_PROTO_L3_TRANS) { |
| dev_err(cs->dev, |
| "ISDN_CMD_SETL3: unsupported protocol (%lu)\n", |
| cntrl->arg >> 8); |
| return -EINVAL; |
| } |
| |
| break; |
| |
| default: |
| gig_dbg(DEBUG_CMD, "unknown command %d from LL", |
| cntrl->command); |
| return -EINVAL; |
| } |
| |
| return retval; |
| |
| oom: |
| dev_err(bcs->cs->dev, "out of memory\n"); |
| for (i = 0; i < AT_NUM; ++i) |
| kfree(commands[i]); |
| kfree(commands); |
| gigaset_free_channel(bcs); |
| return -ENOMEM; |
| } |
| |
| static void gigaset_i4l_cmd(struct cardstate *cs, int cmd) |
| { |
| isdn_if *iif = cs->iif; |
| isdn_ctrl command; |
| |
| command.driver = cs->myid; |
| command.command = cmd; |
| command.arg = 0; |
| iif->statcallb(&command); |
| } |
| |
| static void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd) |
| { |
| isdn_if *iif = bcs->cs->iif; |
| isdn_ctrl command; |
| |
| command.driver = bcs->cs->myid; |
| command.command = cmd; |
| command.arg = bcs->channel; |
| iif->statcallb(&command); |
| } |
| |
| /** |
| * gigaset_isdn_icall() - signal incoming call |
| * @at_state: connection state structure. |
| * |
| * Called by main module to notify the LL that an incoming call has been |
| * received. @at_state contains the parameters of the call. |
| * |
| * Return value: call disposition (ICALL_*) |
| */ |
| int gigaset_isdn_icall(struct at_state_t *at_state) |
| { |
| struct cardstate *cs = at_state->cs; |
| struct bc_state *bcs = at_state->bcs; |
| isdn_if *iif = cs->iif; |
| isdn_ctrl response; |
| int retval; |
| |
| /* fill ICALL structure */ |
| response.parm.setup.si1 = 0; /* default: unknown */ |
| response.parm.setup.si2 = 0; |
| response.parm.setup.screen = 0; |
| response.parm.setup.plan = 0; |
| if (!at_state->str_var[STR_ZBC]) { |
| /* no BC (internal call): assume speech, A-law */ |
| response.parm.setup.si1 = 1; |
| } else if (!strcmp(at_state->str_var[STR_ZBC], "8890")) { |
| /* unrestricted digital information */ |
| response.parm.setup.si1 = 7; |
| } else if (!strcmp(at_state->str_var[STR_ZBC], "8090A3")) { |
| /* speech, A-law */ |
| response.parm.setup.si1 = 1; |
| } else if (!strcmp(at_state->str_var[STR_ZBC], "9090A3")) { |
| /* 3,1 kHz audio, A-law */ |
| response.parm.setup.si1 = 1; |
| response.parm.setup.si2 = 2; |
| } else { |
| dev_warn(cs->dev, "RING ignored - unsupported BC %s\n", |
| at_state->str_var[STR_ZBC]); |
| return ICALL_IGNORE; |
| } |
| if (at_state->str_var[STR_NMBR]) { |
| strlcpy(response.parm.setup.phone, at_state->str_var[STR_NMBR], |
| sizeof response.parm.setup.phone); |
| } else |
| response.parm.setup.phone[0] = 0; |
| if (at_state->str_var[STR_ZCPN]) { |
| strlcpy(response.parm.setup.eazmsn, at_state->str_var[STR_ZCPN], |
| sizeof response.parm.setup.eazmsn); |
| } else |
| response.parm.setup.eazmsn[0] = 0; |
| |
| if (!bcs) { |
| dev_notice(cs->dev, "no channel for incoming call\n"); |
| response.command = ISDN_STAT_ICALLW; |
| response.arg = 0; |
| } else { |
| gig_dbg(DEBUG_CMD, "Sending ICALL"); |
| response.command = ISDN_STAT_ICALL; |
| response.arg = bcs->channel; |
| } |
| response.driver = cs->myid; |
| retval = iif->statcallb(&response); |
| gig_dbg(DEBUG_CMD, "Response: %d", retval); |
| switch (retval) { |
| case 0: /* no takers */ |
| return ICALL_IGNORE; |
| case 1: /* alerting */ |
| bcs->chstate |= CHS_NOTIFY_LL; |
| return ICALL_ACCEPT; |
| case 2: /* reject */ |
| return ICALL_REJECT; |
| case 3: /* incomplete */ |
| dev_warn(cs->dev, |
| "LL requested unsupported feature: Incomplete Number\n"); |
| return ICALL_IGNORE; |
| case 4: /* proceeding */ |
| /* Gigaset will send ALERTING anyway. |
| * There doesn't seem to be a way to avoid this. |
| */ |
| return ICALL_ACCEPT; |
| case 5: /* deflect */ |
| dev_warn(cs->dev, |
| "LL requested unsupported feature: Call Deflection\n"); |
| return ICALL_IGNORE; |
| default: |
| dev_err(cs->dev, "LL error %d on ICALL\n", retval); |
| return ICALL_IGNORE; |
| } |
| } |
| |
| /** |
| * gigaset_isdn_connD() - signal D channel connect |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by main module to notify the LL that the D channel connection has |
| * been established. |
| */ |
| void gigaset_isdn_connD(struct bc_state *bcs) |
| { |
| gig_dbg(DEBUG_CMD, "sending DCONN"); |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN); |
| } |
| |
| /** |
| * gigaset_isdn_hupD() - signal D channel hangup |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by main module to notify the LL that the D channel connection has |
| * been shut down. |
| */ |
| void gigaset_isdn_hupD(struct bc_state *bcs) |
| { |
| gig_dbg(DEBUG_CMD, "sending DHUP"); |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP); |
| } |
| |
| /** |
| * gigaset_isdn_connB() - signal B channel connect |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by main module to notify the LL that the B channel connection has |
| * been established. |
| */ |
| void gigaset_isdn_connB(struct bc_state *bcs) |
| { |
| gig_dbg(DEBUG_CMD, "sending BCONN"); |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BCONN); |
| } |
| |
| /** |
| * gigaset_isdn_hupB() - signal B channel hangup |
| * @bcs: B channel descriptor structure. |
| * |
| * Called by main module to notify the LL that the B channel connection has |
| * been shut down. |
| */ |
| void gigaset_isdn_hupB(struct bc_state *bcs) |
| { |
| gig_dbg(DEBUG_CMD, "sending BHUP"); |
| gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BHUP); |
| } |
| |
| /** |
| * gigaset_isdn_start() - signal device availability |
| * @cs: device descriptor structure. |
| * |
| * Called by main module to notify the LL that the device is available for |
| * use. |
| */ |
| void gigaset_isdn_start(struct cardstate *cs) |
| { |
| gig_dbg(DEBUG_CMD, "sending RUN"); |
| gigaset_i4l_cmd(cs, ISDN_STAT_RUN); |
| } |
| |
| /** |
| * gigaset_isdn_stop() - signal device unavailability |
| * @cs: device descriptor structure. |
| * |
| * Called by main module to notify the LL that the device is no longer |
| * available for use. |
| */ |
| void gigaset_isdn_stop(struct cardstate *cs) |
| { |
| gig_dbg(DEBUG_CMD, "sending STOP"); |
| gigaset_i4l_cmd(cs, ISDN_STAT_STOP); |
| } |
| |
| /** |
| * gigaset_isdn_regdev() - register to LL |
| * @cs: device descriptor structure. |
| * @isdnid: device name. |
| * |
| * Return value: 1 for success, 0 for failure |
| */ |
| int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid) |
| { |
| isdn_if *iif; |
| |
| pr_info("ISDN4Linux interface\n"); |
| |
| iif = kmalloc(sizeof *iif, GFP_KERNEL); |
| if (!iif) { |
| pr_err("out of memory\n"); |
| return 0; |
| } |
| |
| if (snprintf(iif->id, sizeof iif->id, "%s_%u", isdnid, cs->minor_index) |
| >= sizeof iif->id) { |
| pr_err("ID too long: %s\n", isdnid); |
| kfree(iif); |
| return 0; |
| } |
| |
| iif->owner = THIS_MODULE; |
| iif->channels = cs->channels; |
| iif->maxbufsize = MAX_BUF_SIZE; |
| iif->features = ISDN_FEATURE_L2_TRANS | |
| ISDN_FEATURE_L2_HDLC | |
| ISDN_FEATURE_L2_X75I | |
| ISDN_FEATURE_L3_TRANS | |
| ISDN_FEATURE_P_EURO; |
| iif->hl_hdrlen = HW_HDR_LEN; /* Area for storing ack */ |
| iif->command = command_from_LL; |
| iif->writebuf_skb = writebuf_from_LL; |
| iif->writecmd = NULL; /* Don't support isdnctrl */ |
| iif->readstat = NULL; /* Don't support isdnctrl */ |
| iif->rcvcallb_skb = NULL; /* Will be set by LL */ |
| iif->statcallb = NULL; /* Will be set by LL */ |
| |
| if (!register_isdn(iif)) { |
| pr_err("register_isdn failed\n"); |
| kfree(iif); |
| return 0; |
| } |
| |
| cs->iif = iif; |
| cs->myid = iif->channels; /* Set my device id */ |
| cs->hw_hdr_len = HW_HDR_LEN; |
| return 1; |
| } |
| |
| /** |
| * gigaset_isdn_unregdev() - unregister device from LL |
| * @cs: device descriptor structure. |
| */ |
| void gigaset_isdn_unregdev(struct cardstate *cs) |
| { |
| gig_dbg(DEBUG_CMD, "sending UNLOAD"); |
| gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD); |
| kfree(cs->iif); |
| cs->iif = NULL; |
| } |
| |
| /** |
| * gigaset_isdn_regdrv() - register driver to LL |
| */ |
| void gigaset_isdn_regdrv(void) |
| { |
| /* nothing to do */ |
| } |
| |
| /** |
| * gigaset_isdn_unregdrv() - unregister driver from LL |
| */ |
| void gigaset_isdn_unregdrv(void) |
| { |
| /* nothing to do */ |
| } |