| /* |
| * drivers/video/aty/radeon_pm.c |
| * |
| * Copyright 2003,2004 Ben. Herrenschmidt <benh@kernel.crashing.org> |
| * Copyright 2004 Paul Mackerras <paulus@samba.org> |
| * |
| * This is the power management code for ATI radeon chipsets. It contains |
| * some dynamic clock PM enable/disable code similar to what X.org does, |
| * some D2-state (APM-style) sleep/wakeup code for use on some PowerMacs, |
| * and the necessary bits to re-initialize from scratch a few chips found |
| * on PowerMacs as well. The later could be extended to more platforms |
| * provided the memory controller configuration code be made more generic, |
| * and you can get the proper mode register commands for your RAMs. |
| * Those things may be found in the BIOS image... |
| */ |
| |
| #include "radeonfb.h" |
| |
| #include <linux/console.h> |
| #include <linux/agp_backend.h> |
| |
| #ifdef CONFIG_PPC_PMAC |
| #include <asm/machdep.h> |
| #include <asm/prom.h> |
| #include <asm/pmac_feature.h> |
| #endif |
| |
| #include "ati_ids.h" |
| |
| /* |
| * Workarounds for bugs in PC laptops: |
| * - enable D2 sleep in some IBM Thinkpads |
| * - special case for Samsung P35 |
| * |
| * Whitelist by subsystem vendor/device because |
| * its the subsystem vendor's fault! |
| */ |
| |
| #if defined(CONFIG_PM) && defined(CONFIG_X86) |
| static void radeon_reinitialize_M10(struct radeonfb_info *rinfo); |
| |
| struct radeon_device_id { |
| const char *ident; /* (arbitrary) Name */ |
| const unsigned short subsystem_vendor; /* Subsystem Vendor ID */ |
| const unsigned short subsystem_device; /* Subsystem Device ID */ |
| const enum radeon_pm_mode pm_mode_modifier; /* modify pm_mode */ |
| const reinit_function_ptr new_reinit_func; /* changed reinit_func */ |
| }; |
| |
| #define BUGFIX(model, sv, sd, pm, fn) { \ |
| .ident = model, \ |
| .subsystem_vendor = sv, \ |
| .subsystem_device = sd, \ |
| .pm_mode_modifier = pm, \ |
| .new_reinit_func = fn \ |
| } |
| |
| static struct radeon_device_id radeon_workaround_list[] = { |
| BUGFIX("IBM Thinkpad R32", |
| PCI_VENDOR_ID_IBM, 0x1905, |
| radeon_pm_d2, NULL), |
| BUGFIX("IBM Thinkpad R40", |
| PCI_VENDOR_ID_IBM, 0x0526, |
| radeon_pm_d2, NULL), |
| BUGFIX("IBM Thinkpad R40", |
| PCI_VENDOR_ID_IBM, 0x0527, |
| radeon_pm_d2, NULL), |
| BUGFIX("IBM Thinkpad R50/R51/T40/T41", |
| PCI_VENDOR_ID_IBM, 0x0531, |
| radeon_pm_d2, NULL), |
| BUGFIX("IBM Thinkpad R51/T40/T41/T42", |
| PCI_VENDOR_ID_IBM, 0x0530, |
| radeon_pm_d2, NULL), |
| BUGFIX("IBM Thinkpad T30", |
| PCI_VENDOR_ID_IBM, 0x0517, |
| radeon_pm_d2, NULL), |
| BUGFIX("IBM Thinkpad T40p", |
| PCI_VENDOR_ID_IBM, 0x054d, |
| radeon_pm_d2, NULL), |
| BUGFIX("IBM Thinkpad T42", |
| PCI_VENDOR_ID_IBM, 0x0550, |
| radeon_pm_d2, NULL), |
| BUGFIX("IBM Thinkpad X31/X32", |
| PCI_VENDOR_ID_IBM, 0x052f, |
| radeon_pm_d2, NULL), |
| BUGFIX("Samsung P35", |
| PCI_VENDOR_ID_SAMSUNG, 0xc00c, |
| radeon_pm_off, radeon_reinitialize_M10), |
| BUGFIX("Acer Aspire 2010", |
| PCI_VENDOR_ID_AI, 0x0061, |
| radeon_pm_off, radeon_reinitialize_M10), |
| { .ident = NULL } |
| }; |
| |
| static int radeon_apply_workarounds(struct radeonfb_info *rinfo) |
| { |
| struct radeon_device_id *id; |
| |
| for (id = radeon_workaround_list; id->ident != NULL; id++ ) |
| if ((id->subsystem_vendor == rinfo->pdev->subsystem_vendor ) && |
| (id->subsystem_device == rinfo->pdev->subsystem_device )) { |
| |
| /* we found a device that requires workaround */ |
| printk(KERN_DEBUG "radeonfb: %s detected" |
| ", enabling workaround\n", id->ident); |
| |
| rinfo->pm_mode |= id->pm_mode_modifier; |
| |
| if (id->new_reinit_func != NULL) |
| rinfo->reinit_func = id->new_reinit_func; |
| |
| return 1; |
| } |
| return 0; /* not found */ |
| } |
| |
| #else /* defined(CONFIG_PM) && defined(CONFIG_X86) */ |
| static inline int radeon_apply_workarounds(struct radeonfb_info *rinfo) |
| { |
| return 0; |
| } |
| #endif /* defined(CONFIG_PM) && defined(CONFIG_X86) */ |
| |
| |
| |
| static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo) |
| { |
| u32 tmp; |
| |
| /* RV100 */ |
| if ((rinfo->family == CHIP_FAMILY_RV100) && (!rinfo->is_mobility)) { |
| if (rinfo->has_CRTC2) { |
| tmp = INPLL(pllSCLK_CNTL); |
| tmp &= ~SCLK_CNTL__DYN_STOP_LAT_MASK; |
| tmp |= SCLK_CNTL__CP_MAX_DYN_STOP_LAT | SCLK_CNTL__FORCEON_MASK; |
| OUTPLL(pllSCLK_CNTL, tmp); |
| } |
| tmp = INPLL(pllMCLK_CNTL); |
| tmp |= (MCLK_CNTL__FORCE_MCLKA | |
| MCLK_CNTL__FORCE_MCLKB | |
| MCLK_CNTL__FORCE_YCLKA | |
| MCLK_CNTL__FORCE_YCLKB | |
| MCLK_CNTL__FORCE_AIC | |
| MCLK_CNTL__FORCE_MC); |
| OUTPLL(pllMCLK_CNTL, tmp); |
| return; |
| } |
| /* R100 */ |
| if (!rinfo->has_CRTC2) { |
| tmp = INPLL(pllSCLK_CNTL); |
| tmp |= (SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_HDP | |
| SCLK_CNTL__FORCE_DISP1 | SCLK_CNTL__FORCE_TOP | |
| SCLK_CNTL__FORCE_E2 | SCLK_CNTL__FORCE_SE | |
| SCLK_CNTL__FORCE_IDCT | SCLK_CNTL__FORCE_VIP | |
| SCLK_CNTL__FORCE_RE | SCLK_CNTL__FORCE_PB | |
| SCLK_CNTL__FORCE_TAM | SCLK_CNTL__FORCE_TDM | |
| SCLK_CNTL__FORCE_RB); |
| OUTPLL(pllSCLK_CNTL, tmp); |
| return; |
| } |
| /* RV350 (M10/M11) */ |
| if (rinfo->family == CHIP_FAMILY_RV350) { |
| /* for RV350/M10/M11, no delays are required. */ |
| tmp = INPLL(pllSCLK_CNTL2); |
| tmp |= (SCLK_CNTL2__R300_FORCE_TCL | |
| SCLK_CNTL2__R300_FORCE_GA | |
| SCLK_CNTL2__R300_FORCE_CBA); |
| OUTPLL(pllSCLK_CNTL2, tmp); |
| |
| tmp = INPLL(pllSCLK_CNTL); |
| tmp |= (SCLK_CNTL__FORCE_DISP2 | SCLK_CNTL__FORCE_CP | |
| SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 | |
| SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_E2 | |
| SCLK_CNTL__R300_FORCE_VAP | SCLK_CNTL__FORCE_IDCT | |
| SCLK_CNTL__FORCE_VIP | SCLK_CNTL__R300_FORCE_SR | |
| SCLK_CNTL__R300_FORCE_PX | SCLK_CNTL__R300_FORCE_TX | |
| SCLK_CNTL__R300_FORCE_US | SCLK_CNTL__FORCE_TV_SCLK | |
| SCLK_CNTL__R300_FORCE_SU | SCLK_CNTL__FORCE_OV0); |
| OUTPLL(pllSCLK_CNTL, tmp); |
| |
| tmp = INPLL(pllSCLK_MORE_CNTL); |
| tmp |= (SCLK_MORE_CNTL__FORCE_DISPREGS | SCLK_MORE_CNTL__FORCE_MC_GUI | |
| SCLK_MORE_CNTL__FORCE_MC_HOST); |
| OUTPLL(pllSCLK_MORE_CNTL, tmp); |
| |
| tmp = INPLL(pllMCLK_CNTL); |
| tmp |= (MCLK_CNTL__FORCE_MCLKA | |
| MCLK_CNTL__FORCE_MCLKB | |
| MCLK_CNTL__FORCE_YCLKA | |
| MCLK_CNTL__FORCE_YCLKB | |
| MCLK_CNTL__FORCE_MC); |
| OUTPLL(pllMCLK_CNTL, tmp); |
| |
| tmp = INPLL(pllVCLK_ECP_CNTL); |
| tmp &= ~(VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb | |
| VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb | |
| VCLK_ECP_CNTL__R300_DISP_DAC_PIXCLK_DAC_BLANK_OFF); |
| OUTPLL(pllVCLK_ECP_CNTL, tmp); |
| |
| tmp = INPLL(pllPIXCLKS_CNTL); |
| tmp &= ~(PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb | |
| PIXCLKS_CNTL__DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_DVOCLK_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_PIXCLK_DVO_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF); |
| OUTPLL(pllPIXCLKS_CNTL, tmp); |
| |
| return; |
| } |
| |
| /* Default */ |
| |
| /* Force Core Clocks */ |
| tmp = INPLL(pllSCLK_CNTL); |
| tmp |= (SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_E2); |
| |
| /* XFree doesn't do that case, but we had this code from Apple and it |
| * seem necessary for proper suspend/resume operations |
| */ |
| if (rinfo->is_mobility) { |
| tmp |= SCLK_CNTL__FORCE_HDP| |
| SCLK_CNTL__FORCE_DISP1| |
| SCLK_CNTL__FORCE_DISP2| |
| SCLK_CNTL__FORCE_TOP| |
| SCLK_CNTL__FORCE_SE| |
| SCLK_CNTL__FORCE_IDCT| |
| SCLK_CNTL__FORCE_VIP| |
| SCLK_CNTL__FORCE_PB| |
| SCLK_CNTL__FORCE_RE| |
| SCLK_CNTL__FORCE_TAM| |
| SCLK_CNTL__FORCE_TDM| |
| SCLK_CNTL__FORCE_RB| |
| SCLK_CNTL__FORCE_TV_SCLK| |
| SCLK_CNTL__FORCE_SUBPIC| |
| SCLK_CNTL__FORCE_OV0; |
| } |
| else if (rinfo->family == CHIP_FAMILY_R300 || |
| rinfo->family == CHIP_FAMILY_R350) { |
| tmp |= SCLK_CNTL__FORCE_HDP | |
| SCLK_CNTL__FORCE_DISP1 | |
| SCLK_CNTL__FORCE_DISP2 | |
| SCLK_CNTL__FORCE_TOP | |
| SCLK_CNTL__FORCE_IDCT | |
| SCLK_CNTL__FORCE_VIP; |
| } |
| OUTPLL(pllSCLK_CNTL, tmp); |
| radeon_msleep(16); |
| |
| if (rinfo->family == CHIP_FAMILY_R300 || rinfo->family == CHIP_FAMILY_R350) { |
| tmp = INPLL(pllSCLK_CNTL2); |
| tmp |= SCLK_CNTL2__R300_FORCE_TCL | |
| SCLK_CNTL2__R300_FORCE_GA | |
| SCLK_CNTL2__R300_FORCE_CBA; |
| OUTPLL(pllSCLK_CNTL2, tmp); |
| radeon_msleep(16); |
| } |
| |
| tmp = INPLL(pllCLK_PIN_CNTL); |
| tmp &= ~CLK_PIN_CNTL__SCLK_DYN_START_CNTL; |
| OUTPLL(pllCLK_PIN_CNTL, tmp); |
| radeon_msleep(15); |
| |
| if (rinfo->is_IGP) { |
| /* Weird ... X is _un_ forcing clocks here, I think it's |
| * doing backward. Imitate it for now... |
| */ |
| tmp = INPLL(pllMCLK_CNTL); |
| tmp &= ~(MCLK_CNTL__FORCE_MCLKA | |
| MCLK_CNTL__FORCE_YCLKA); |
| OUTPLL(pllMCLK_CNTL, tmp); |
| radeon_msleep(16); |
| } |
| /* Hrm... same shit, X doesn't do that but I have to */ |
| else if (rinfo->is_mobility) { |
| tmp = INPLL(pllMCLK_CNTL); |
| tmp |= (MCLK_CNTL__FORCE_MCLKA | |
| MCLK_CNTL__FORCE_MCLKB | |
| MCLK_CNTL__FORCE_YCLKA | |
| MCLK_CNTL__FORCE_YCLKB); |
| OUTPLL(pllMCLK_CNTL, tmp); |
| radeon_msleep(16); |
| |
| tmp = INPLL(pllMCLK_MISC); |
| tmp &= ~(MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT| |
| MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT| |
| MCLK_MISC__MC_MCLK_DYN_ENABLE| |
| MCLK_MISC__IO_MCLK_DYN_ENABLE); |
| OUTPLL(pllMCLK_MISC, tmp); |
| radeon_msleep(15); |
| } |
| |
| if (rinfo->is_mobility) { |
| tmp = INPLL(pllSCLK_MORE_CNTL); |
| tmp |= SCLK_MORE_CNTL__FORCE_DISPREGS| |
| SCLK_MORE_CNTL__FORCE_MC_GUI| |
| SCLK_MORE_CNTL__FORCE_MC_HOST; |
| OUTPLL(pllSCLK_MORE_CNTL, tmp); |
| radeon_msleep(16); |
| } |
| |
| tmp = INPLL(pllPIXCLKS_CNTL); |
| tmp &= ~(PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb); |
| OUTPLL(pllPIXCLKS_CNTL, tmp); |
| radeon_msleep(16); |
| |
| tmp = INPLL( pllVCLK_ECP_CNTL); |
| tmp &= ~(VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb | |
| VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb); |
| OUTPLL( pllVCLK_ECP_CNTL, tmp); |
| radeon_msleep(16); |
| } |
| |
| static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo) |
| { |
| u32 tmp; |
| |
| /* R100 */ |
| if (!rinfo->has_CRTC2) { |
| tmp = INPLL(pllSCLK_CNTL); |
| |
| if ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13) |
| tmp &= ~(SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_RB); |
| tmp &= ~(SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 | |
| SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_SE | |
| SCLK_CNTL__FORCE_IDCT | SCLK_CNTL__FORCE_RE | |
| SCLK_CNTL__FORCE_PB | SCLK_CNTL__FORCE_TAM | |
| SCLK_CNTL__FORCE_TDM); |
| OUTPLL(pllSCLK_CNTL, tmp); |
| return; |
| } |
| |
| /* M10/M11 */ |
| if (rinfo->family == CHIP_FAMILY_RV350) { |
| tmp = INPLL(pllSCLK_CNTL2); |
| tmp &= ~(SCLK_CNTL2__R300_FORCE_TCL | |
| SCLK_CNTL2__R300_FORCE_GA | |
| SCLK_CNTL2__R300_FORCE_CBA); |
| tmp |= (SCLK_CNTL2__R300_TCL_MAX_DYN_STOP_LAT | |
| SCLK_CNTL2__R300_GA_MAX_DYN_STOP_LAT | |
| SCLK_CNTL2__R300_CBA_MAX_DYN_STOP_LAT); |
| OUTPLL(pllSCLK_CNTL2, tmp); |
| |
| tmp = INPLL(pllSCLK_CNTL); |
| tmp &= ~(SCLK_CNTL__FORCE_DISP2 | SCLK_CNTL__FORCE_CP | |
| SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 | |
| SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_E2 | |
| SCLK_CNTL__R300_FORCE_VAP | SCLK_CNTL__FORCE_IDCT | |
| SCLK_CNTL__FORCE_VIP | SCLK_CNTL__R300_FORCE_SR | |
| SCLK_CNTL__R300_FORCE_PX | SCLK_CNTL__R300_FORCE_TX | |
| SCLK_CNTL__R300_FORCE_US | SCLK_CNTL__FORCE_TV_SCLK | |
| SCLK_CNTL__R300_FORCE_SU | SCLK_CNTL__FORCE_OV0); |
| tmp |= SCLK_CNTL__DYN_STOP_LAT_MASK; |
| OUTPLL(pllSCLK_CNTL, tmp); |
| |
| tmp = INPLL(pllSCLK_MORE_CNTL); |
| tmp &= ~SCLK_MORE_CNTL__FORCEON; |
| tmp |= SCLK_MORE_CNTL__DISPREGS_MAX_DYN_STOP_LAT | |
| SCLK_MORE_CNTL__MC_GUI_MAX_DYN_STOP_LAT | |
| SCLK_MORE_CNTL__MC_HOST_MAX_DYN_STOP_LAT; |
| OUTPLL(pllSCLK_MORE_CNTL, tmp); |
| |
| tmp = INPLL(pllVCLK_ECP_CNTL); |
| tmp |= (VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb | |
| VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb); |
| OUTPLL(pllVCLK_ECP_CNTL, tmp); |
| |
| tmp = INPLL(pllPIXCLKS_CNTL); |
| tmp |= (PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb | |
| PIXCLKS_CNTL__DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_DVOCLK_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_PIXCLK_DVO_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb | |
| PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb); |
| OUTPLL(pllPIXCLKS_CNTL, tmp); |
| |
| tmp = INPLL(pllMCLK_MISC); |
| tmp |= (MCLK_MISC__MC_MCLK_DYN_ENABLE | |
| MCLK_MISC__IO_MCLK_DYN_ENABLE); |
| OUTPLL(pllMCLK_MISC, tmp); |
| |
| tmp = INPLL(pllMCLK_CNTL); |
| tmp |= (MCLK_CNTL__FORCE_MCLKA | MCLK_CNTL__FORCE_MCLKB); |
| tmp &= ~(MCLK_CNTL__FORCE_YCLKA | |
| MCLK_CNTL__FORCE_YCLKB | |
| MCLK_CNTL__FORCE_MC); |
| |
| /* Some releases of vbios have set DISABLE_MC_MCLKA |
| * and DISABLE_MC_MCLKB bits in the vbios table. Setting these |
| * bits will cause H/W hang when reading video memory with dynamic |
| * clocking enabled. |
| */ |
| if ((tmp & MCLK_CNTL__R300_DISABLE_MC_MCLKA) && |
| (tmp & MCLK_CNTL__R300_DISABLE_MC_MCLKB)) { |
| /* If both bits are set, then check the active channels */ |
| tmp = INPLL(pllMCLK_CNTL); |
| if (rinfo->vram_width == 64) { |
| if (INREG(MEM_CNTL) & R300_MEM_USE_CD_CH_ONLY) |
| tmp &= ~MCLK_CNTL__R300_DISABLE_MC_MCLKB; |
| else |
| tmp &= ~MCLK_CNTL__R300_DISABLE_MC_MCLKA; |
| } else { |
| tmp &= ~(MCLK_CNTL__R300_DISABLE_MC_MCLKA | |
| MCLK_CNTL__R300_DISABLE_MC_MCLKB); |
| } |
| } |
| OUTPLL(pllMCLK_CNTL, tmp); |
| return; |
| } |
| |
| /* R300 */ |
| if (rinfo->family == CHIP_FAMILY_R300 || rinfo->family == CHIP_FAMILY_R350) { |
| tmp = INPLL(pllSCLK_CNTL); |
| tmp &= ~(SCLK_CNTL__R300_FORCE_VAP); |
| tmp |= SCLK_CNTL__FORCE_CP; |
| OUTPLL(pllSCLK_CNTL, tmp); |
| radeon_msleep(15); |
| |
| tmp = INPLL(pllSCLK_CNTL2); |
| tmp &= ~(SCLK_CNTL2__R300_FORCE_TCL | |
| SCLK_CNTL2__R300_FORCE_GA | |
| SCLK_CNTL2__R300_FORCE_CBA); |
| OUTPLL(pllSCLK_CNTL2, tmp); |
| } |
| |
| /* Others */ |
| |
| tmp = INPLL( pllCLK_PWRMGT_CNTL); |
| tmp &= ~(CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK| |
| CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT_MASK| |
| CLK_PWRMGT_CNTL__DYN_STOP_MODE_MASK); |
| tmp |= CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE_MASK | |
| (0x01 << CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT__SHIFT); |
| OUTPLL( pllCLK_PWRMGT_CNTL, tmp); |
| radeon_msleep(15); |
| |
| tmp = INPLL(pllCLK_PIN_CNTL); |
| tmp |= CLK_PIN_CNTL__SCLK_DYN_START_CNTL; |
| OUTPLL(pllCLK_PIN_CNTL, tmp); |
| radeon_msleep(15); |
| |
| /* When DRI is enabled, setting DYN_STOP_LAT to zero can cause some R200 |
| * to lockup randomly, leave them as set by BIOS. |
| */ |
| tmp = INPLL(pllSCLK_CNTL); |
| tmp &= ~SCLK_CNTL__FORCEON_MASK; |
| |
| /*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300*/ |
| if ((rinfo->family == CHIP_FAMILY_RV250 && |
| ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) || |
| ((rinfo->family == CHIP_FAMILY_RV100) && |
| ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) { |
| tmp |= SCLK_CNTL__FORCE_CP; |
| tmp |= SCLK_CNTL__FORCE_VIP; |
| } |
| OUTPLL(pllSCLK_CNTL, tmp); |
| radeon_msleep(15); |
| |
| if ((rinfo->family == CHIP_FAMILY_RV200) || |
| (rinfo->family == CHIP_FAMILY_RV250) || |
| (rinfo->family == CHIP_FAMILY_RV280)) { |
| tmp = INPLL(pllSCLK_MORE_CNTL); |
| tmp &= ~SCLK_MORE_CNTL__FORCEON; |
| |
| /* RV200::A11 A12 RV250::A11 A12 */ |
| if (((rinfo->family == CHIP_FAMILY_RV200) || |
| (rinfo->family == CHIP_FAMILY_RV250)) && |
| ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) |
| tmp |= SCLK_MORE_CNTL__FORCEON; |
| |
| OUTPLL(pllSCLK_MORE_CNTL, tmp); |
| radeon_msleep(15); |
| } |
| |
| |
| /* RV200::A11 A12, RV250::A11 A12 */ |
| if (((rinfo->family == CHIP_FAMILY_RV200) || |
| (rinfo->family == CHIP_FAMILY_RV250)) && |
| ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) { |
| tmp = INPLL(pllPLL_PWRMGT_CNTL); |
| tmp |= PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE; |
| OUTPLL(pllPLL_PWRMGT_CNTL, tmp); |
| radeon_msleep(15); |
| } |
| |
| tmp = INPLL(pllPIXCLKS_CNTL); |
| tmp |= PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb; |
| OUTPLL(pllPIXCLKS_CNTL, tmp); |
| radeon_msleep(15); |
| |
| tmp = INPLL(pllVCLK_ECP_CNTL); |
| tmp |= VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb | |
| VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb; |
| OUTPLL(pllVCLK_ECP_CNTL, tmp); |
| |
| /* X doesn't do that ... hrm, we do on mobility && Macs */ |
| #ifdef CONFIG_PPC_OF |
| if (rinfo->is_mobility) { |
| tmp = INPLL(pllMCLK_CNTL); |
| tmp &= ~(MCLK_CNTL__FORCE_MCLKA | |
| MCLK_CNTL__FORCE_MCLKB | |
| MCLK_CNTL__FORCE_YCLKA | |
| MCLK_CNTL__FORCE_YCLKB); |
| OUTPLL(pllMCLK_CNTL, tmp); |
| radeon_msleep(15); |
| |
| tmp = INPLL(pllMCLK_MISC); |
| tmp |= MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT| |
| MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT| |
| MCLK_MISC__MC_MCLK_DYN_ENABLE| |
| MCLK_MISC__IO_MCLK_DYN_ENABLE; |
| OUTPLL(pllMCLK_MISC, tmp); |
| radeon_msleep(15); |
| } |
| #endif /* CONFIG_PPC_OF */ |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static void OUTMC( struct radeonfb_info *rinfo, u8 indx, u32 value) |
| { |
| OUTREG( MC_IND_INDEX, indx | MC_IND_INDEX__MC_IND_WR_EN); |
| OUTREG( MC_IND_DATA, value); |
| } |
| |
| static u32 INMC(struct radeonfb_info *rinfo, u8 indx) |
| { |
| OUTREG( MC_IND_INDEX, indx); |
| return INREG( MC_IND_DATA); |
| } |
| |
| static void radeon_pm_save_regs(struct radeonfb_info *rinfo, int saving_for_d3) |
| { |
| rinfo->save_regs[0] = INPLL(PLL_PWRMGT_CNTL); |
| rinfo->save_regs[1] = INPLL(CLK_PWRMGT_CNTL); |
| rinfo->save_regs[2] = INPLL(MCLK_CNTL); |
| rinfo->save_regs[3] = INPLL(SCLK_CNTL); |
| rinfo->save_regs[4] = INPLL(CLK_PIN_CNTL); |
| rinfo->save_regs[5] = INPLL(VCLK_ECP_CNTL); |
| rinfo->save_regs[6] = INPLL(PIXCLKS_CNTL); |
| rinfo->save_regs[7] = INPLL(MCLK_MISC); |
| rinfo->save_regs[8] = INPLL(P2PLL_CNTL); |
| |
| rinfo->save_regs[9] = INREG(DISP_MISC_CNTL); |
| rinfo->save_regs[10] = INREG(DISP_PWR_MAN); |
| rinfo->save_regs[11] = INREG(LVDS_GEN_CNTL); |
| rinfo->save_regs[13] = INREG(TV_DAC_CNTL); |
| rinfo->save_regs[14] = INREG(BUS_CNTL1); |
| rinfo->save_regs[15] = INREG(CRTC_OFFSET_CNTL); |
| rinfo->save_regs[16] = INREG(AGP_CNTL); |
| rinfo->save_regs[17] = (INREG(CRTC_GEN_CNTL) & 0xfdffffff) | 0x04000000; |
| rinfo->save_regs[18] = (INREG(CRTC2_GEN_CNTL) & 0xfdffffff) | 0x04000000; |
| rinfo->save_regs[19] = INREG(GPIOPAD_A); |
| rinfo->save_regs[20] = INREG(GPIOPAD_EN); |
| rinfo->save_regs[21] = INREG(GPIOPAD_MASK); |
| rinfo->save_regs[22] = INREG(ZV_LCDPAD_A); |
| rinfo->save_regs[23] = INREG(ZV_LCDPAD_EN); |
| rinfo->save_regs[24] = INREG(ZV_LCDPAD_MASK); |
| rinfo->save_regs[25] = INREG(GPIO_VGA_DDC); |
| rinfo->save_regs[26] = INREG(GPIO_DVI_DDC); |
| rinfo->save_regs[27] = INREG(GPIO_MONID); |
| rinfo->save_regs[28] = INREG(GPIO_CRT2_DDC); |
| |
| rinfo->save_regs[29] = INREG(SURFACE_CNTL); |
| rinfo->save_regs[30] = INREG(MC_FB_LOCATION); |
| rinfo->save_regs[31] = INREG(DISPLAY_BASE_ADDR); |
| rinfo->save_regs[32] = INREG(MC_AGP_LOCATION); |
| rinfo->save_regs[33] = INREG(CRTC2_DISPLAY_BASE_ADDR); |
| |
| rinfo->save_regs[34] = INPLL(SCLK_MORE_CNTL); |
| rinfo->save_regs[35] = INREG(MEM_SDRAM_MODE_REG); |
| rinfo->save_regs[36] = INREG(BUS_CNTL); |
| rinfo->save_regs[39] = INREG(RBBM_CNTL); |
| rinfo->save_regs[40] = INREG(DAC_CNTL); |
| rinfo->save_regs[41] = INREG(HOST_PATH_CNTL); |
| rinfo->save_regs[37] = INREG(MPP_TB_CONFIG); |
| rinfo->save_regs[38] = INREG(FCP_CNTL); |
| |
| if (rinfo->is_mobility) { |
| rinfo->save_regs[12] = INREG(LVDS_PLL_CNTL); |
| rinfo->save_regs[43] = INPLL(pllSSPLL_CNTL); |
| rinfo->save_regs[44] = INPLL(pllSSPLL_REF_DIV); |
| rinfo->save_regs[45] = INPLL(pllSSPLL_DIV_0); |
| rinfo->save_regs[90] = INPLL(pllSS_INT_CNTL); |
| rinfo->save_regs[91] = INPLL(pllSS_TST_CNTL); |
| rinfo->save_regs[81] = INREG(LVDS_GEN_CNTL); |
| } |
| |
| if (rinfo->family >= CHIP_FAMILY_RV200) { |
| rinfo->save_regs[42] = INREG(MEM_REFRESH_CNTL); |
| rinfo->save_regs[46] = INREG(MC_CNTL); |
| rinfo->save_regs[47] = INREG(MC_INIT_GFX_LAT_TIMER); |
| rinfo->save_regs[48] = INREG(MC_INIT_MISC_LAT_TIMER); |
| rinfo->save_regs[49] = INREG(MC_TIMING_CNTL); |
| rinfo->save_regs[50] = INREG(MC_READ_CNTL_AB); |
| rinfo->save_regs[51] = INREG(MC_IOPAD_CNTL); |
| rinfo->save_regs[52] = INREG(MC_CHIP_IO_OE_CNTL_AB); |
| rinfo->save_regs[53] = INREG(MC_DEBUG); |
| } |
| rinfo->save_regs[54] = INREG(PAMAC0_DLY_CNTL); |
| rinfo->save_regs[55] = INREG(PAMAC1_DLY_CNTL); |
| rinfo->save_regs[56] = INREG(PAD_CTLR_MISC); |
| rinfo->save_regs[57] = INREG(FW_CNTL); |
| |
| if (rinfo->family >= CHIP_FAMILY_R300) { |
| rinfo->save_regs[58] = INMC(rinfo, ixR300_MC_MC_INIT_WR_LAT_TIMER); |
| rinfo->save_regs[59] = INMC(rinfo, ixR300_MC_IMP_CNTL); |
| rinfo->save_regs[60] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_C0); |
| rinfo->save_regs[61] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_C1); |
| rinfo->save_regs[62] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_D0); |
| rinfo->save_regs[63] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_D1); |
| rinfo->save_regs[64] = INMC(rinfo, ixR300_MC_BIST_CNTL_3); |
| rinfo->save_regs[65] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_A0); |
| rinfo->save_regs[66] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_A1); |
| rinfo->save_regs[67] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_B0); |
| rinfo->save_regs[68] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_B1); |
| rinfo->save_regs[69] = INMC(rinfo, ixR300_MC_DEBUG_CNTL); |
| rinfo->save_regs[70] = INMC(rinfo, ixR300_MC_DLL_CNTL); |
| rinfo->save_regs[71] = INMC(rinfo, ixR300_MC_IMP_CNTL_0); |
| rinfo->save_regs[72] = INMC(rinfo, ixR300_MC_ELPIDA_CNTL); |
| rinfo->save_regs[96] = INMC(rinfo, ixR300_MC_READ_CNTL_CD); |
| } else { |
| rinfo->save_regs[59] = INMC(rinfo, ixMC_IMP_CNTL); |
| rinfo->save_regs[65] = INMC(rinfo, ixMC_CHP_IO_CNTL_A0); |
| rinfo->save_regs[66] = INMC(rinfo, ixMC_CHP_IO_CNTL_A1); |
| rinfo->save_regs[67] = INMC(rinfo, ixMC_CHP_IO_CNTL_B0); |
| rinfo->save_regs[68] = INMC(rinfo, ixMC_CHP_IO_CNTL_B1); |
| rinfo->save_regs[71] = INMC(rinfo, ixMC_IMP_CNTL_0); |
| } |
| |
| rinfo->save_regs[73] = INPLL(pllMPLL_CNTL); |
| rinfo->save_regs[74] = INPLL(pllSPLL_CNTL); |
| rinfo->save_regs[75] = INPLL(pllMPLL_AUX_CNTL); |
| rinfo->save_regs[76] = INPLL(pllSPLL_AUX_CNTL); |
| rinfo->save_regs[77] = INPLL(pllM_SPLL_REF_FB_DIV); |
| rinfo->save_regs[78] = INPLL(pllAGP_PLL_CNTL); |
| rinfo->save_regs[79] = INREG(PAMAC2_DLY_CNTL); |
| |
| rinfo->save_regs[80] = INREG(OV0_BASE_ADDR); |
| rinfo->save_regs[82] = INREG(FP_GEN_CNTL); |
| rinfo->save_regs[83] = INREG(FP2_GEN_CNTL); |
| rinfo->save_regs[84] = INREG(TMDS_CNTL); |
| rinfo->save_regs[85] = INREG(TMDS_TRANSMITTER_CNTL); |
| rinfo->save_regs[86] = INREG(DISP_OUTPUT_CNTL); |
| rinfo->save_regs[87] = INREG(DISP_HW_DEBUG); |
| rinfo->save_regs[88] = INREG(TV_MASTER_CNTL); |
| rinfo->save_regs[89] = INPLL(pllP2PLL_REF_DIV); |
| rinfo->save_regs[92] = INPLL(pllPPLL_DIV_0); |
| rinfo->save_regs[93] = INPLL(pllPPLL_CNTL); |
| rinfo->save_regs[94] = INREG(GRPH_BUFFER_CNTL); |
| rinfo->save_regs[95] = INREG(GRPH2_BUFFER_CNTL); |
| rinfo->save_regs[96] = INREG(HDP_DEBUG); |
| rinfo->save_regs[97] = INPLL(pllMDLL_CKO); |
| rinfo->save_regs[98] = INPLL(pllMDLL_RDCKA); |
| rinfo->save_regs[99] = INPLL(pllMDLL_RDCKB); |
| } |
| |
| static void radeon_pm_restore_regs(struct radeonfb_info *rinfo) |
| { |
| OUTPLL(P2PLL_CNTL, rinfo->save_regs[8] & 0xFFFFFFFE); /* First */ |
| |
| OUTPLL(PLL_PWRMGT_CNTL, rinfo->save_regs[0]); |
| OUTPLL(CLK_PWRMGT_CNTL, rinfo->save_regs[1]); |
| OUTPLL(MCLK_CNTL, rinfo->save_regs[2]); |
| OUTPLL(SCLK_CNTL, rinfo->save_regs[3]); |
| OUTPLL(CLK_PIN_CNTL, rinfo->save_regs[4]); |
| OUTPLL(VCLK_ECP_CNTL, rinfo->save_regs[5]); |
| OUTPLL(PIXCLKS_CNTL, rinfo->save_regs[6]); |
| OUTPLL(MCLK_MISC, rinfo->save_regs[7]); |
| if (rinfo->family == CHIP_FAMILY_RV350) |
| OUTPLL(SCLK_MORE_CNTL, rinfo->save_regs[34]); |
| |
| OUTREG(SURFACE_CNTL, rinfo->save_regs[29]); |
| OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]); |
| OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]); |
| OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]); |
| OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); |
| OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); |
| |
| OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]); |
| OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]); |
| OUTREG(LVDS_GEN_CNTL, rinfo->save_regs[11]); |
| OUTREG(LVDS_PLL_CNTL,rinfo->save_regs[12]); |
| OUTREG(TV_DAC_CNTL, rinfo->save_regs[13]); |
| OUTREG(BUS_CNTL1, rinfo->save_regs[14]); |
| OUTREG(CRTC_OFFSET_CNTL, rinfo->save_regs[15]); |
| OUTREG(AGP_CNTL, rinfo->save_regs[16]); |
| OUTREG(CRTC_GEN_CNTL, rinfo->save_regs[17]); |
| OUTREG(CRTC2_GEN_CNTL, rinfo->save_regs[18]); |
| OUTPLL(P2PLL_CNTL, rinfo->save_regs[8]); |
| |
| OUTREG(GPIOPAD_A, rinfo->save_regs[19]); |
| OUTREG(GPIOPAD_EN, rinfo->save_regs[20]); |
| OUTREG(GPIOPAD_MASK, rinfo->save_regs[21]); |
| OUTREG(ZV_LCDPAD_A, rinfo->save_regs[22]); |
| OUTREG(ZV_LCDPAD_EN, rinfo->save_regs[23]); |
| OUTREG(ZV_LCDPAD_MASK, rinfo->save_regs[24]); |
| OUTREG(GPIO_VGA_DDC, rinfo->save_regs[25]); |
| OUTREG(GPIO_DVI_DDC, rinfo->save_regs[26]); |
| OUTREG(GPIO_MONID, rinfo->save_regs[27]); |
| OUTREG(GPIO_CRT2_DDC, rinfo->save_regs[28]); |
| } |
| |
| static void radeon_pm_disable_iopad(struct radeonfb_info *rinfo) |
| { |
| OUTREG(GPIOPAD_MASK, 0x0001ffff); |
| OUTREG(GPIOPAD_EN, 0x00000400); |
| OUTREG(GPIOPAD_A, 0x00000000); |
| OUTREG(ZV_LCDPAD_MASK, 0x00000000); |
| OUTREG(ZV_LCDPAD_EN, 0x00000000); |
| OUTREG(ZV_LCDPAD_A, 0x00000000); |
| OUTREG(GPIO_VGA_DDC, 0x00030000); |
| OUTREG(GPIO_DVI_DDC, 0x00000000); |
| OUTREG(GPIO_MONID, 0x00030000); |
| OUTREG(GPIO_CRT2_DDC, 0x00000000); |
| } |
| |
| static void radeon_pm_program_v2clk(struct radeonfb_info *rinfo) |
| { |
| /* Set v2clk to 65MHz */ |
| if (rinfo->family <= CHIP_FAMILY_RV280) { |
| OUTPLL(pllPIXCLKS_CNTL, |
| __INPLL(rinfo, pllPIXCLKS_CNTL) |
| & ~PIXCLKS_CNTL__PIX2CLK_SRC_SEL_MASK); |
| |
| OUTPLL(pllP2PLL_REF_DIV, 0x0000000c); |
| OUTPLL(pllP2PLL_CNTL, 0x0000bf00); |
| } else { |
| OUTPLL(pllP2PLL_REF_DIV, 0x0000000c); |
| INPLL(pllP2PLL_REF_DIV); |
| OUTPLL(pllP2PLL_CNTL, 0x0000a700); |
| } |
| |
| OUTPLL(pllP2PLL_DIV_0, 0x00020074 | P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_W); |
| |
| OUTPLL(pllP2PLL_CNTL, INPLL(pllP2PLL_CNTL) & ~P2PLL_CNTL__P2PLL_SLEEP); |
| mdelay(1); |
| |
| OUTPLL(pllP2PLL_CNTL, INPLL(pllP2PLL_CNTL) & ~P2PLL_CNTL__P2PLL_RESET); |
| mdelay( 1); |
| |
| OUTPLL(pllPIXCLKS_CNTL, |
| (INPLL(pllPIXCLKS_CNTL) & ~PIXCLKS_CNTL__PIX2CLK_SRC_SEL_MASK) |
| | (0x03 << PIXCLKS_CNTL__PIX2CLK_SRC_SEL__SHIFT)); |
| mdelay( 1); |
| } |
| |
| static void radeon_pm_low_current(struct radeonfb_info *rinfo) |
| { |
| u32 reg; |
| |
| reg = INREG(BUS_CNTL1); |
| if (rinfo->family <= CHIP_FAMILY_RV280) { |
| reg &= ~BUS_CNTL1_MOBILE_PLATFORM_SEL_MASK; |
| reg |= BUS_CNTL1_AGPCLK_VALID | (1<<BUS_CNTL1_MOBILE_PLATFORM_SEL_SHIFT); |
| } else { |
| reg |= 0x4080; |
| } |
| OUTREG(BUS_CNTL1, reg); |
| |
| reg = INPLL(PLL_PWRMGT_CNTL); |
| reg |= PLL_PWRMGT_CNTL_SPLL_TURNOFF | PLL_PWRMGT_CNTL_PPLL_TURNOFF | |
| PLL_PWRMGT_CNTL_P2PLL_TURNOFF | PLL_PWRMGT_CNTL_TVPLL_TURNOFF; |
| reg &= ~PLL_PWRMGT_CNTL_SU_MCLK_USE_BCLK; |
| reg &= ~PLL_PWRMGT_CNTL_MOBILE_SU; |
| OUTPLL(PLL_PWRMGT_CNTL, reg); |
| |
| reg = INREG(TV_DAC_CNTL); |
| reg &= ~(TV_DAC_CNTL_BGADJ_MASK |TV_DAC_CNTL_DACADJ_MASK); |
| reg |=TV_DAC_CNTL_BGSLEEP | TV_DAC_CNTL_RDACPD | TV_DAC_CNTL_GDACPD | |
| TV_DAC_CNTL_BDACPD | |
| (8<<TV_DAC_CNTL_BGADJ__SHIFT) | (8<<TV_DAC_CNTL_DACADJ__SHIFT); |
| OUTREG(TV_DAC_CNTL, reg); |
| |
| reg = INREG(TMDS_TRANSMITTER_CNTL); |
| reg &= ~(TMDS_PLL_EN | TMDS_PLLRST); |
| OUTREG(TMDS_TRANSMITTER_CNTL, reg); |
| |
| reg = INREG(DAC_CNTL); |
| reg &= ~DAC_CMP_EN; |
| OUTREG(DAC_CNTL, reg); |
| |
| reg = INREG(DAC_CNTL2); |
| reg &= ~DAC2_CMP_EN; |
| OUTREG(DAC_CNTL2, reg); |
| |
| reg = INREG(TV_DAC_CNTL); |
| reg &= ~TV_DAC_CNTL_DETECT; |
| OUTREG(TV_DAC_CNTL, reg); |
| } |
| |
| static void radeon_pm_setup_for_suspend(struct radeonfb_info *rinfo) |
| { |
| |
| u32 sclk_cntl, mclk_cntl, sclk_more_cntl; |
| |
| u32 pll_pwrmgt_cntl; |
| u32 clk_pwrmgt_cntl; |
| u32 clk_pin_cntl; |
| u32 vclk_ecp_cntl; |
| u32 pixclks_cntl; |
| u32 disp_mis_cntl; |
| u32 disp_pwr_man; |
| u32 tmp; |
| |
| /* Force Core Clocks */ |
| sclk_cntl = INPLL( pllSCLK_CNTL); |
| sclk_cntl |= SCLK_CNTL__IDCT_MAX_DYN_STOP_LAT| |
| SCLK_CNTL__VIP_MAX_DYN_STOP_LAT| |
| SCLK_CNTL__RE_MAX_DYN_STOP_LAT| |
| SCLK_CNTL__PB_MAX_DYN_STOP_LAT| |
| SCLK_CNTL__TAM_MAX_DYN_STOP_LAT| |
| SCLK_CNTL__TDM_MAX_DYN_STOP_LAT| |
| SCLK_CNTL__RB_MAX_DYN_STOP_LAT| |
| |
| SCLK_CNTL__FORCE_DISP2| |
| SCLK_CNTL__FORCE_CP| |
| SCLK_CNTL__FORCE_HDP| |
| SCLK_CNTL__FORCE_DISP1| |
| SCLK_CNTL__FORCE_TOP| |
| SCLK_CNTL__FORCE_E2| |
| SCLK_CNTL__FORCE_SE| |
| SCLK_CNTL__FORCE_IDCT| |
| SCLK_CNTL__FORCE_VIP| |
| |
| SCLK_CNTL__FORCE_PB| |
| SCLK_CNTL__FORCE_TAM| |
| SCLK_CNTL__FORCE_TDM| |
| SCLK_CNTL__FORCE_RB| |
| SCLK_CNTL__FORCE_TV_SCLK| |
| SCLK_CNTL__FORCE_SUBPIC| |
| SCLK_CNTL__FORCE_OV0; |
| if (rinfo->family <= CHIP_FAMILY_RV280) |
| sclk_cntl |= SCLK_CNTL__FORCE_RE; |
| else |
| sclk_cntl |= SCLK_CNTL__SE_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__E2_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__TV_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__HDP_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__CP_MAX_DYN_STOP_LAT; |
| |
| OUTPLL( pllSCLK_CNTL, sclk_cntl); |
| |
| sclk_more_cntl = INPLL(pllSCLK_MORE_CNTL); |
| sclk_more_cntl |= SCLK_MORE_CNTL__FORCE_DISPREGS | |
| SCLK_MORE_CNTL__FORCE_MC_GUI | |
| SCLK_MORE_CNTL__FORCE_MC_HOST; |
| |
| OUTPLL(pllSCLK_MORE_CNTL, sclk_more_cntl); |
| |
| |
| mclk_cntl = INPLL( pllMCLK_CNTL); |
| mclk_cntl &= ~( MCLK_CNTL__FORCE_MCLKA | |
| MCLK_CNTL__FORCE_MCLKB | |
| MCLK_CNTL__FORCE_YCLKA | |
| MCLK_CNTL__FORCE_YCLKB | |
| MCLK_CNTL__FORCE_MC |
| ); |
| OUTPLL( pllMCLK_CNTL, mclk_cntl); |
| |
| /* Force Display clocks */ |
| vclk_ecp_cntl = INPLL( pllVCLK_ECP_CNTL); |
| vclk_ecp_cntl &= ~(VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb |
| | VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb); |
| vclk_ecp_cntl |= VCLK_ECP_CNTL__ECP_FORCE_ON; |
| OUTPLL( pllVCLK_ECP_CNTL, vclk_ecp_cntl); |
| |
| |
| pixclks_cntl = INPLL( pllPIXCLKS_CNTL); |
| pixclks_cntl &= ~( PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb | |
| PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb| |
| PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb); |
| |
| OUTPLL( pllPIXCLKS_CNTL, pixclks_cntl); |
| |
| /* Switch off LVDS interface */ |
| OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & |
| ~(LVDS_BLON | LVDS_EN | LVDS_ON | LVDS_DIGON)); |
| |
| /* Enable System power management */ |
| pll_pwrmgt_cntl = INPLL( pllPLL_PWRMGT_CNTL); |
| |
| pll_pwrmgt_cntl |= PLL_PWRMGT_CNTL__SPLL_TURNOFF | |
| PLL_PWRMGT_CNTL__MPLL_TURNOFF| |
| PLL_PWRMGT_CNTL__PPLL_TURNOFF| |
| PLL_PWRMGT_CNTL__P2PLL_TURNOFF| |
| PLL_PWRMGT_CNTL__TVPLL_TURNOFF; |
| |
| OUTPLL( pllPLL_PWRMGT_CNTL, pll_pwrmgt_cntl); |
| |
| clk_pwrmgt_cntl = INPLL( pllCLK_PWRMGT_CNTL); |
| |
| clk_pwrmgt_cntl &= ~( CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF| |
| CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF| |
| CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF| |
| CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF| |
| CLK_PWRMGT_CNTL__MCLK_TURNOFF| |
| CLK_PWRMGT_CNTL__SCLK_TURNOFF| |
| CLK_PWRMGT_CNTL__PCLK_TURNOFF| |
| CLK_PWRMGT_CNTL__P2CLK_TURNOFF| |
| CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF| |
| CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN| |
| CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE| |
| CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK| |
| CLK_PWRMGT_CNTL__CG_NO1_DEBUG_MASK |
| ); |
| |
| clk_pwrmgt_cntl |= CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN |
| | CLK_PWRMGT_CNTL__DISP_PM; |
| |
| OUTPLL( pllCLK_PWRMGT_CNTL, clk_pwrmgt_cntl); |
| |
| clk_pin_cntl = INPLL( pllCLK_PIN_CNTL); |
| |
| clk_pin_cntl &= ~CLK_PIN_CNTL__ACCESS_REGS_IN_SUSPEND; |
| |
| /* because both INPLL and OUTPLL take the same lock, that's why. */ |
| tmp = INPLL( pllMCLK_MISC) | MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND; |
| OUTPLL( pllMCLK_MISC, tmp); |
| |
| /* BUS_CNTL1__MOBILE_PLATORM_SEL setting is northbridge chipset |
| * and radeon chip dependent. Thus we only enable it on Mac for |
| * now (until we get more info on how to compute the correct |
| * value for various X86 bridges). |
| */ |
| #ifdef CONFIG_PPC_PMAC |
| if (machine_is(powermac)) { |
| /* AGP PLL control */ |
| if (rinfo->family <= CHIP_FAMILY_RV280) { |
| OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) | BUS_CNTL1__AGPCLK_VALID); |
| OUTREG(BUS_CNTL1, |
| (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK) |
| | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT)); // 440BX |
| } else { |
| OUTREG(BUS_CNTL1, INREG(BUS_CNTL1)); |
| OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000); |
| } |
| } |
| #endif |
| |
| OUTREG(CRTC_OFFSET_CNTL, (INREG(CRTC_OFFSET_CNTL) |
| & ~CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN)); |
| |
| clk_pin_cntl &= ~CLK_PIN_CNTL__CG_CLK_TO_OUTPIN; |
| clk_pin_cntl |= CLK_PIN_CNTL__XTALIN_ALWAYS_ONb; |
| OUTPLL( pllCLK_PIN_CNTL, clk_pin_cntl); |
| |
| /* Solano2M */ |
| OUTREG(AGP_CNTL, |
| (INREG(AGP_CNTL) & ~(AGP_CNTL__MAX_IDLE_CLK_MASK)) |
| | (0x20<<AGP_CNTL__MAX_IDLE_CLK__SHIFT)); |
| |
| /* ACPI mode */ |
| /* because both INPLL and OUTPLL take the same lock, that's why. */ |
| tmp = INPLL( pllPLL_PWRMGT_CNTL) & ~PLL_PWRMGT_CNTL__PM_MODE_SEL; |
| OUTPLL( pllPLL_PWRMGT_CNTL, tmp); |
| |
| |
| disp_mis_cntl = INREG(DISP_MISC_CNTL); |
| |
| disp_mis_cntl &= ~( DISP_MISC_CNTL__SOFT_RESET_GRPH_PP | |
| DISP_MISC_CNTL__SOFT_RESET_SUBPIC_PP | |
| DISP_MISC_CNTL__SOFT_RESET_OV0_PP | |
| DISP_MISC_CNTL__SOFT_RESET_GRPH_SCLK| |
| DISP_MISC_CNTL__SOFT_RESET_SUBPIC_SCLK| |
| DISP_MISC_CNTL__SOFT_RESET_OV0_SCLK| |
| DISP_MISC_CNTL__SOFT_RESET_GRPH2_PP| |
| DISP_MISC_CNTL__SOFT_RESET_GRPH2_SCLK| |
| DISP_MISC_CNTL__SOFT_RESET_LVDS| |
| DISP_MISC_CNTL__SOFT_RESET_TMDS| |
| DISP_MISC_CNTL__SOFT_RESET_DIG_TMDS| |
| DISP_MISC_CNTL__SOFT_RESET_TV); |
| |
| OUTREG(DISP_MISC_CNTL, disp_mis_cntl); |
| |
| disp_pwr_man = INREG(DISP_PWR_MAN); |
| |
| disp_pwr_man &= ~( DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN | |
| DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN | |
| DISP_PWR_MAN__DISP_PWR_MAN_DPMS_MASK| |
| DISP_PWR_MAN__DISP_D3_RST| |
| DISP_PWR_MAN__DISP_D3_REG_RST |
| ); |
| |
| disp_pwr_man |= DISP_PWR_MAN__DISP_D3_GRPH_RST| |
| DISP_PWR_MAN__DISP_D3_SUBPIC_RST| |
| DISP_PWR_MAN__DISP_D3_OV0_RST| |
| DISP_PWR_MAN__DISP_D1D2_GRPH_RST| |
| DISP_PWR_MAN__DISP_D1D2_SUBPIC_RST| |
| DISP_PWR_MAN__DISP_D1D2_OV0_RST| |
| DISP_PWR_MAN__DIG_TMDS_ENABLE_RST| |
| DISP_PWR_MAN__TV_ENABLE_RST| |
| // DISP_PWR_MAN__AUTO_PWRUP_EN| |
| 0; |
| |
| OUTREG(DISP_PWR_MAN, disp_pwr_man); |
| |
| clk_pwrmgt_cntl = INPLL( pllCLK_PWRMGT_CNTL); |
| pll_pwrmgt_cntl = INPLL( pllPLL_PWRMGT_CNTL) ; |
| clk_pin_cntl = INPLL( pllCLK_PIN_CNTL); |
| disp_pwr_man = INREG(DISP_PWR_MAN); |
| |
| |
| /* D2 */ |
| clk_pwrmgt_cntl |= CLK_PWRMGT_CNTL__DISP_PM; |
| pll_pwrmgt_cntl |= PLL_PWRMGT_CNTL__MOBILE_SU | PLL_PWRMGT_CNTL__SU_SCLK_USE_BCLK; |
| clk_pin_cntl |= CLK_PIN_CNTL__XTALIN_ALWAYS_ONb; |
| disp_pwr_man &= ~(DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN_MASK |
| | DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN_MASK); |
| |
| OUTPLL( pllCLK_PWRMGT_CNTL, clk_pwrmgt_cntl); |
| OUTPLL( pllPLL_PWRMGT_CNTL, pll_pwrmgt_cntl); |
| OUTPLL( pllCLK_PIN_CNTL, clk_pin_cntl); |
| OUTREG(DISP_PWR_MAN, disp_pwr_man); |
| |
| /* disable display request & disable display */ |
| OUTREG( CRTC_GEN_CNTL, (INREG( CRTC_GEN_CNTL) & ~CRTC_GEN_CNTL__CRTC_EN) |
| | CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B); |
| OUTREG( CRTC2_GEN_CNTL, (INREG( CRTC2_GEN_CNTL) & ~CRTC2_GEN_CNTL__CRTC2_EN) |
| | CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B); |
| |
| mdelay(17); |
| |
| } |
| |
| static void radeon_pm_yclk_mclk_sync(struct radeonfb_info *rinfo) |
| { |
| u32 mc_chp_io_cntl_a1, mc_chp_io_cntl_b1; |
| |
| mc_chp_io_cntl_a1 = INMC( rinfo, ixMC_CHP_IO_CNTL_A1) |
| & ~MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA_MASK; |
| mc_chp_io_cntl_b1 = INMC( rinfo, ixMC_CHP_IO_CNTL_B1) |
| & ~MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB_MASK; |
| |
| OUTMC( rinfo, ixMC_CHP_IO_CNTL_A1, mc_chp_io_cntl_a1 |
| | (1<<MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA__SHIFT)); |
| OUTMC( rinfo, ixMC_CHP_IO_CNTL_B1, mc_chp_io_cntl_b1 |
| | (1<<MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB__SHIFT)); |
| |
| OUTMC( rinfo, ixMC_CHP_IO_CNTL_A1, mc_chp_io_cntl_a1); |
| OUTMC( rinfo, ixMC_CHP_IO_CNTL_B1, mc_chp_io_cntl_b1); |
| |
| mdelay( 1); |
| } |
| |
| static void radeon_pm_yclk_mclk_sync_m10(struct radeonfb_info *rinfo) |
| { |
| u32 mc_chp_io_cntl_a1, mc_chp_io_cntl_b1; |
| |
| mc_chp_io_cntl_a1 = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_A1) |
| & ~MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA_MASK; |
| mc_chp_io_cntl_b1 = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_B1) |
| & ~MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB_MASK; |
| |
| OUTMC( rinfo, ixR300_MC_CHP_IO_CNTL_A1, |
| mc_chp_io_cntl_a1 | (1<<MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA__SHIFT)); |
| OUTMC( rinfo, ixR300_MC_CHP_IO_CNTL_B1, |
| mc_chp_io_cntl_b1 | (1<<MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB__SHIFT)); |
| |
| OUTMC( rinfo, ixR300_MC_CHP_IO_CNTL_A1, mc_chp_io_cntl_a1); |
| OUTMC( rinfo, ixR300_MC_CHP_IO_CNTL_B1, mc_chp_io_cntl_b1); |
| |
| mdelay( 1); |
| } |
| |
| static void radeon_pm_program_mode_reg(struct radeonfb_info *rinfo, u16 value, |
| u8 delay_required) |
| { |
| u32 mem_sdram_mode; |
| |
| mem_sdram_mode = INREG( MEM_SDRAM_MODE_REG); |
| |
| mem_sdram_mode &= ~MEM_SDRAM_MODE_REG__MEM_MODE_REG_MASK; |
| mem_sdram_mode |= (value<<MEM_SDRAM_MODE_REG__MEM_MODE_REG__SHIFT) |
| | MEM_SDRAM_MODE_REG__MEM_CFG_TYPE; |
| OUTREG( MEM_SDRAM_MODE_REG, mem_sdram_mode); |
| if (delay_required >= 2) |
| mdelay(1); |
| |
| mem_sdram_mode |= MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET; |
| OUTREG( MEM_SDRAM_MODE_REG, mem_sdram_mode); |
| if (delay_required >= 2) |
| mdelay(1); |
| |
| mem_sdram_mode &= ~MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET; |
| OUTREG( MEM_SDRAM_MODE_REG, mem_sdram_mode); |
| if (delay_required >= 2) |
| mdelay(1); |
| |
| if (delay_required) { |
| do { |
| if (delay_required >= 2) |
| mdelay(1); |
| } while ((INREG(MC_STATUS) |
| & (MC_STATUS__MEM_PWRUP_COMPL_A | |
| MC_STATUS__MEM_PWRUP_COMPL_B)) == 0); |
| } |
| } |
| |
| static void radeon_pm_m10_program_mode_wait(struct radeonfb_info *rinfo) |
| { |
| int cnt; |
| |
| for (cnt = 0; cnt < 100; ++cnt) { |
| mdelay(1); |
| if (INREG(MC_STATUS) & (MC_STATUS__MEM_PWRUP_COMPL_A |
| | MC_STATUS__MEM_PWRUP_COMPL_B)) |
| break; |
| } |
| } |
| |
| |
| static void radeon_pm_enable_dll(struct radeonfb_info *rinfo) |
| { |
| #define DLL_RESET_DELAY 5 |
| #define DLL_SLEEP_DELAY 1 |
| |
| u32 cko = INPLL(pllMDLL_CKO) | MDLL_CKO__MCKOA_SLEEP |
| | MDLL_CKO__MCKOA_RESET; |
| u32 cka = INPLL(pllMDLL_RDCKA) | MDLL_RDCKA__MRDCKA0_SLEEP |
| | MDLL_RDCKA__MRDCKA1_SLEEP | MDLL_RDCKA__MRDCKA0_RESET |
| | MDLL_RDCKA__MRDCKA1_RESET; |
| u32 ckb = INPLL(pllMDLL_RDCKB) | MDLL_RDCKB__MRDCKB0_SLEEP |
| | MDLL_RDCKB__MRDCKB1_SLEEP | MDLL_RDCKB__MRDCKB0_RESET |
| | MDLL_RDCKB__MRDCKB1_RESET; |
| |
| /* Setting up the DLL range for write */ |
| OUTPLL(pllMDLL_CKO, cko); |
| OUTPLL(pllMDLL_RDCKA, cka); |
| OUTPLL(pllMDLL_RDCKB, ckb); |
| |
| mdelay(DLL_RESET_DELAY*2); |
| |
| cko &= ~(MDLL_CKO__MCKOA_SLEEP | MDLL_CKO__MCKOB_SLEEP); |
| OUTPLL(pllMDLL_CKO, cko); |
| mdelay(DLL_SLEEP_DELAY); |
| cko &= ~(MDLL_CKO__MCKOA_RESET | MDLL_CKO__MCKOB_RESET); |
| OUTPLL(pllMDLL_CKO, cko); |
| mdelay(DLL_RESET_DELAY); |
| |
| cka &= ~(MDLL_RDCKA__MRDCKA0_SLEEP | MDLL_RDCKA__MRDCKA1_SLEEP); |
| OUTPLL(pllMDLL_RDCKA, cka); |
| mdelay(DLL_SLEEP_DELAY); |
| cka &= ~(MDLL_RDCKA__MRDCKA0_RESET | MDLL_RDCKA__MRDCKA1_RESET); |
| OUTPLL(pllMDLL_RDCKA, cka); |
| mdelay(DLL_RESET_DELAY); |
| |
| ckb &= ~(MDLL_RDCKB__MRDCKB0_SLEEP | MDLL_RDCKB__MRDCKB1_SLEEP); |
| OUTPLL(pllMDLL_RDCKB, ckb); |
| mdelay(DLL_SLEEP_DELAY); |
| ckb &= ~(MDLL_RDCKB__MRDCKB0_RESET | MDLL_RDCKB__MRDCKB1_RESET); |
| OUTPLL(pllMDLL_RDCKB, ckb); |
| mdelay(DLL_RESET_DELAY); |
| |
| |
| #undef DLL_RESET_DELAY |
| #undef DLL_SLEEP_DELAY |
| } |
| |
| static void radeon_pm_enable_dll_m10(struct radeonfb_info *rinfo) |
| { |
| u32 dll_value; |
| u32 dll_sleep_mask = 0; |
| u32 dll_reset_mask = 0; |
| u32 mc; |
| |
| #define DLL_RESET_DELAY 5 |
| #define DLL_SLEEP_DELAY 1 |
| |
| OUTMC(rinfo, ixR300_MC_DLL_CNTL, rinfo->save_regs[70]); |
| mc = INREG(MC_CNTL); |
| /* Check which channels are enabled */ |
| switch (mc & 0x3) { |
| case 1: |
| if (mc & 0x4) |
| break; |
| case 2: |
| dll_sleep_mask |= MDLL_R300_RDCK__MRDCKB_SLEEP; |
| dll_reset_mask |= MDLL_R300_RDCK__MRDCKB_RESET; |
| case 0: |
| dll_sleep_mask |= MDLL_R300_RDCK__MRDCKA_SLEEP; |
| dll_reset_mask |= MDLL_R300_RDCK__MRDCKA_RESET; |
| } |
| switch (mc & 0x3) { |
| case 1: |
| if (!(mc & 0x4)) |
| break; |
| case 2: |
| dll_sleep_mask |= MDLL_R300_RDCK__MRDCKD_SLEEP; |
| dll_reset_mask |= MDLL_R300_RDCK__MRDCKD_RESET; |
| dll_sleep_mask |= MDLL_R300_RDCK__MRDCKC_SLEEP; |
| dll_reset_mask |= MDLL_R300_RDCK__MRDCKC_RESET; |
| } |
| |
| dll_value = INPLL(pllMDLL_RDCKA); |
| |
| /* Power Up */ |
| dll_value &= ~(dll_sleep_mask); |
| OUTPLL(pllMDLL_RDCKA, dll_value); |
| mdelay( DLL_SLEEP_DELAY); |
| |
| dll_value &= ~(dll_reset_mask); |
| OUTPLL(pllMDLL_RDCKA, dll_value); |
| mdelay( DLL_RESET_DELAY); |
| |
| #undef DLL_RESET_DELAY |
| #undef DLL_SLEEP_DELAY |
| } |
| |
| |
| static void radeon_pm_full_reset_sdram(struct radeonfb_info *rinfo) |
| { |
| u32 crtcGenCntl, crtcGenCntl2, memRefreshCntl, crtc_more_cntl, |
| fp_gen_cntl, fp2_gen_cntl; |
| |
| crtcGenCntl = INREG( CRTC_GEN_CNTL); |
| crtcGenCntl2 = INREG( CRTC2_GEN_CNTL); |
| |
| crtc_more_cntl = INREG( CRTC_MORE_CNTL); |
| fp_gen_cntl = INREG( FP_GEN_CNTL); |
| fp2_gen_cntl = INREG( FP2_GEN_CNTL); |
| |
| |
| OUTREG( CRTC_MORE_CNTL, 0); |
| OUTREG( FP_GEN_CNTL, 0); |
| OUTREG( FP2_GEN_CNTL,0); |
| |
| OUTREG( CRTC_GEN_CNTL, (crtcGenCntl | CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B) ); |
| OUTREG( CRTC2_GEN_CNTL, (crtcGenCntl2 | CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B) ); |
| |
| /* This is the code for the Aluminium PowerBooks M10 / iBooks M11 */ |
| if (rinfo->family == CHIP_FAMILY_RV350) { |
| u32 sdram_mode_reg = rinfo->save_regs[35]; |
| static const u32 default_mrtable[] = |
| { 0x21320032, |
| 0x21321000, 0xa1321000, 0x21321000, 0xffffffff, |
| 0x21320032, 0xa1320032, 0x21320032, 0xffffffff, |
| 0x21321002, 0xa1321002, 0x21321002, 0xffffffff, |
| 0x21320132, 0xa1320132, 0x21320132, 0xffffffff, |
| 0x21320032, 0xa1320032, 0x21320032, 0xffffffff, |
| 0x31320032 }; |
| |
| const u32 *mrtable = default_mrtable; |
| int i, mrtable_size = ARRAY_SIZE(default_mrtable); |
| |
| mdelay(30); |
| |
| /* Disable refresh */ |
| memRefreshCntl = INREG( MEM_REFRESH_CNTL) |
| & ~MEM_REFRESH_CNTL__MEM_REFRESH_DIS; |
| OUTREG( MEM_REFRESH_CNTL, memRefreshCntl |
| | MEM_REFRESH_CNTL__MEM_REFRESH_DIS); |
| |
| /* Configure and enable M & SPLLs */ |
| radeon_pm_enable_dll_m10(rinfo); |
| radeon_pm_yclk_mclk_sync_m10(rinfo); |
| |
| #ifdef CONFIG_PPC_OF |
| if (rinfo->of_node != NULL) { |
| int size; |
| |
| mrtable = of_get_property(rinfo->of_node, "ATY,MRT", &size); |
| if (mrtable) |
| mrtable_size = size >> 2; |
| else |
| mrtable = default_mrtable; |
| } |
| #endif /* CONFIG_PPC_OF */ |
| |
| /* Program the SDRAM */ |
| sdram_mode_reg = mrtable[0]; |
| OUTREG(MEM_SDRAM_MODE_REG, sdram_mode_reg); |
| for (i = 0; i < mrtable_size; i++) { |
| if (mrtable[i] == 0xffffffffu) |
| radeon_pm_m10_program_mode_wait(rinfo); |
| else { |
| sdram_mode_reg &= ~(MEM_SDRAM_MODE_REG__MEM_MODE_REG_MASK |
| | MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE |
| | MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET); |
| sdram_mode_reg |= mrtable[i]; |
| |
| OUTREG(MEM_SDRAM_MODE_REG, sdram_mode_reg); |
| mdelay(1); |
| } |
| } |
| |
| /* Restore memory refresh */ |
| OUTREG(MEM_REFRESH_CNTL, memRefreshCntl); |
| mdelay(30); |
| |
| } |
| /* Here come the desktop RV200 "QW" card */ |
| else if (!rinfo->is_mobility && rinfo->family == CHIP_FAMILY_RV200) { |
| /* Disable refresh */ |
| memRefreshCntl = INREG( MEM_REFRESH_CNTL) |
| & ~MEM_REFRESH_CNTL__MEM_REFRESH_DIS; |
| OUTREG(MEM_REFRESH_CNTL, memRefreshCntl |
| | MEM_REFRESH_CNTL__MEM_REFRESH_DIS); |
| mdelay(30); |
| |
| /* Reset memory */ |
| OUTREG(MEM_SDRAM_MODE_REG, |
| INREG( MEM_SDRAM_MODE_REG) & ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE); |
| |
| radeon_pm_program_mode_reg(rinfo, 0x2002, 2); |
| radeon_pm_program_mode_reg(rinfo, 0x0132, 2); |
| radeon_pm_program_mode_reg(rinfo, 0x0032, 2); |
| |
| OUTREG(MEM_SDRAM_MODE_REG, |
| INREG(MEM_SDRAM_MODE_REG) | MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE); |
| |
| OUTREG( MEM_REFRESH_CNTL, memRefreshCntl); |
| |
| } |
| /* The M6 */ |
| else if (rinfo->is_mobility && rinfo->family == CHIP_FAMILY_RV100) { |
| /* Disable refresh */ |
| memRefreshCntl = INREG(EXT_MEM_CNTL) & ~(1 << 20); |
| OUTREG( EXT_MEM_CNTL, memRefreshCntl | (1 << 20)); |
| |
| /* Reset memory */ |
| OUTREG( MEM_SDRAM_MODE_REG, |
| INREG( MEM_SDRAM_MODE_REG) |
| & ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE); |
| |
| /* DLL */ |
| radeon_pm_enable_dll(rinfo); |
| |
| /* MLCK / YCLK sync */ |
| radeon_pm_yclk_mclk_sync(rinfo); |
| |
| /* Program Mode Register */ |
| radeon_pm_program_mode_reg(rinfo, 0x2000, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x2001, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x2002, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x0132, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x0032, 1); |
| |
| /* Complete & re-enable refresh */ |
| OUTREG( MEM_SDRAM_MODE_REG, |
| INREG( MEM_SDRAM_MODE_REG) | MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE); |
| |
| OUTREG(EXT_MEM_CNTL, memRefreshCntl); |
| } |
| /* And finally, the M7..M9 models, including M9+ (RV280) */ |
| else if (rinfo->is_mobility) { |
| |
| /* Disable refresh */ |
| memRefreshCntl = INREG( MEM_REFRESH_CNTL) |
| & ~MEM_REFRESH_CNTL__MEM_REFRESH_DIS; |
| OUTREG( MEM_REFRESH_CNTL, memRefreshCntl |
| | MEM_REFRESH_CNTL__MEM_REFRESH_DIS); |
| |
| /* Reset memory */ |
| OUTREG( MEM_SDRAM_MODE_REG, |
| INREG( MEM_SDRAM_MODE_REG) |
| & ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE); |
| |
| /* DLL */ |
| radeon_pm_enable_dll(rinfo); |
| |
| /* MLCK / YCLK sync */ |
| radeon_pm_yclk_mclk_sync(rinfo); |
| |
| /* M6, M7 and M9 so far ... */ |
| if (rinfo->family <= CHIP_FAMILY_RV250) { |
| radeon_pm_program_mode_reg(rinfo, 0x2000, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x2001, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x2002, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x0132, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x0032, 1); |
| } |
| /* M9+ (iBook G4) */ |
| else if (rinfo->family == CHIP_FAMILY_RV280) { |
| radeon_pm_program_mode_reg(rinfo, 0x2000, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x0132, 1); |
| radeon_pm_program_mode_reg(rinfo, 0x0032, 1); |
| } |
| |
| /* Complete & re-enable refresh */ |
| OUTREG( MEM_SDRAM_MODE_REG, |
| INREG( MEM_SDRAM_MODE_REG) | MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE); |
| |
| OUTREG( MEM_REFRESH_CNTL, memRefreshCntl); |
| } |
| |
| OUTREG( CRTC_GEN_CNTL, crtcGenCntl); |
| OUTREG( CRTC2_GEN_CNTL, crtcGenCntl2); |
| OUTREG( FP_GEN_CNTL, fp_gen_cntl); |
| OUTREG( FP2_GEN_CNTL, fp2_gen_cntl); |
| |
| OUTREG( CRTC_MORE_CNTL, crtc_more_cntl); |
| |
| mdelay( 15); |
| } |
| |
| static void radeon_pm_reset_pad_ctlr_strength(struct radeonfb_info *rinfo) |
| { |
| u32 tmp, tmp2; |
| int i,j; |
| |
| /* Reset the PAD_CTLR_STRENGTH & wait for it to be stable */ |
| INREG(PAD_CTLR_STRENGTH); |
| OUTREG(PAD_CTLR_STRENGTH, INREG(PAD_CTLR_STRENGTH) & ~PAD_MANUAL_OVERRIDE); |
| tmp = INREG(PAD_CTLR_STRENGTH); |
| for (i = j = 0; i < 65; ++i) { |
| mdelay(1); |
| tmp2 = INREG(PAD_CTLR_STRENGTH); |
| if (tmp != tmp2) { |
| tmp = tmp2; |
| i = 0; |
| j++; |
| if (j > 10) { |
| printk(KERN_WARNING "radeon: PAD_CTLR_STRENGTH doesn't " |
| "stabilize !\n"); |
| break; |
| } |
| } |
| } |
| } |
| |
| static void radeon_pm_all_ppls_off(struct radeonfb_info *rinfo) |
| { |
| u32 tmp; |
| |
| tmp = INPLL(pllPPLL_CNTL); |
| OUTPLL(pllPPLL_CNTL, tmp | 0x3); |
| tmp = INPLL(pllP2PLL_CNTL); |
| OUTPLL(pllP2PLL_CNTL, tmp | 0x3); |
| tmp = INPLL(pllSPLL_CNTL); |
| OUTPLL(pllSPLL_CNTL, tmp | 0x3); |
| tmp = INPLL(pllMPLL_CNTL); |
| OUTPLL(pllMPLL_CNTL, tmp | 0x3); |
| } |
| |
| static void radeon_pm_start_mclk_sclk(struct radeonfb_info *rinfo) |
| { |
| u32 tmp; |
| |
| /* Switch SPLL to PCI source */ |
| tmp = INPLL(pllSCLK_CNTL); |
| OUTPLL(pllSCLK_CNTL, tmp & ~SCLK_CNTL__SCLK_SRC_SEL_MASK); |
| |
| /* Reconfigure SPLL charge pump, VCO gain, duty cycle */ |
| tmp = INPLL(pllSPLL_CNTL); |
| OUTREG8(CLOCK_CNTL_INDEX, pllSPLL_CNTL + PLL_WR_EN); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff); |
| radeon_pll_errata_after_data(rinfo); |
| |
| /* Set SPLL feedback divider */ |
| tmp = INPLL(pllM_SPLL_REF_FB_DIV); |
| tmp = (tmp & 0xff00fffful) | (rinfo->save_regs[77] & 0x00ff0000ul); |
| OUTPLL(pllM_SPLL_REF_FB_DIV, tmp); |
| |
| /* Power up SPLL */ |
| tmp = INPLL(pllSPLL_CNTL); |
| OUTPLL(pllSPLL_CNTL, tmp & ~1); |
| (void)INPLL(pllSPLL_CNTL); |
| |
| mdelay(10); |
| |
| /* Release SPLL reset */ |
| tmp = INPLL(pllSPLL_CNTL); |
| OUTPLL(pllSPLL_CNTL, tmp & ~0x2); |
| (void)INPLL(pllSPLL_CNTL); |
| |
| mdelay(10); |
| |
| /* Select SCLK source */ |
| tmp = INPLL(pllSCLK_CNTL); |
| tmp &= ~SCLK_CNTL__SCLK_SRC_SEL_MASK; |
| tmp |= rinfo->save_regs[3] & SCLK_CNTL__SCLK_SRC_SEL_MASK; |
| OUTPLL(pllSCLK_CNTL, tmp); |
| (void)INPLL(pllSCLK_CNTL); |
| |
| mdelay(10); |
| |
| /* Reconfigure MPLL charge pump, VCO gain, duty cycle */ |
| tmp = INPLL(pllMPLL_CNTL); |
| OUTREG8(CLOCK_CNTL_INDEX, pllMPLL_CNTL + PLL_WR_EN); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff); |
| radeon_pll_errata_after_data(rinfo); |
| |
| /* Set MPLL feedback divider */ |
| tmp = INPLL(pllM_SPLL_REF_FB_DIV); |
| tmp = (tmp & 0xffff00fful) | (rinfo->save_regs[77] & 0x0000ff00ul); |
| |
| OUTPLL(pllM_SPLL_REF_FB_DIV, tmp); |
| /* Power up MPLL */ |
| tmp = INPLL(pllMPLL_CNTL); |
| OUTPLL(pllMPLL_CNTL, tmp & ~0x2); |
| (void)INPLL(pllMPLL_CNTL); |
| |
| mdelay(10); |
| |
| /* Un-reset MPLL */ |
| tmp = INPLL(pllMPLL_CNTL); |
| OUTPLL(pllMPLL_CNTL, tmp & ~0x1); |
| (void)INPLL(pllMPLL_CNTL); |
| |
| mdelay(10); |
| |
| /* Select source for MCLK */ |
| tmp = INPLL(pllMCLK_CNTL); |
| tmp |= rinfo->save_regs[2] & 0xffff; |
| OUTPLL(pllMCLK_CNTL, tmp); |
| (void)INPLL(pllMCLK_CNTL); |
| |
| mdelay(10); |
| } |
| |
| static void radeon_pm_m10_disable_spread_spectrum(struct radeonfb_info *rinfo) |
| { |
| u32 r2ec; |
| |
| /* GACK ! I though we didn't have a DDA on Radeon's anymore |
| * here we rewrite with the same value, ... I suppose we clear |
| * some bits that are already clear ? Or maybe this 0x2ec |
| * register is something new ? |
| */ |
| mdelay(20); |
| r2ec = INREG(VGA_DDA_ON_OFF); |
| OUTREG(VGA_DDA_ON_OFF, r2ec); |
| mdelay(1); |
| |
| /* Spread spectrum PLLL off */ |
| OUTPLL(pllSSPLL_CNTL, 0xbf03); |
| |
| /* Spread spectrum disabled */ |
| OUTPLL(pllSS_INT_CNTL, rinfo->save_regs[90] & ~3); |
| |
| /* The trace shows read & rewrite of LVDS_PLL_CNTL here with same |
| * value, not sure what for... |
| */ |
| |
| r2ec |= 0x3f0; |
| OUTREG(VGA_DDA_ON_OFF, r2ec); |
| mdelay(1); |
| } |
| |
| static void radeon_pm_m10_enable_lvds_spread_spectrum(struct radeonfb_info *rinfo) |
| { |
| u32 r2ec, tmp; |
| |
| /* GACK (bis) ! I though we didn't have a DDA on Radeon's anymore |
| * here we rewrite with the same value, ... I suppose we clear/set |
| * some bits that are already clear/set ? |
| */ |
| r2ec = INREG(VGA_DDA_ON_OFF); |
| OUTREG(VGA_DDA_ON_OFF, r2ec); |
| mdelay(1); |
| |
| /* Enable spread spectrum */ |
| OUTPLL(pllSSPLL_CNTL, rinfo->save_regs[43] | 3); |
| mdelay(3); |
| |
| OUTPLL(pllSSPLL_REF_DIV, rinfo->save_regs[44]); |
| OUTPLL(pllSSPLL_DIV_0, rinfo->save_regs[45]); |
| tmp = INPLL(pllSSPLL_CNTL); |
| OUTPLL(pllSSPLL_CNTL, tmp & ~0x2); |
| mdelay(6); |
| tmp = INPLL(pllSSPLL_CNTL); |
| OUTPLL(pllSSPLL_CNTL, tmp & ~0x1); |
| mdelay(5); |
| |
| OUTPLL(pllSS_INT_CNTL, rinfo->save_regs[90]); |
| |
| r2ec |= 8; |
| OUTREG(VGA_DDA_ON_OFF, r2ec); |
| mdelay(20); |
| |
| /* Enable LVDS interface */ |
| tmp = INREG(LVDS_GEN_CNTL); |
| OUTREG(LVDS_GEN_CNTL, tmp | LVDS_EN); |
| |
| /* Enable LVDS_PLL */ |
| tmp = INREG(LVDS_PLL_CNTL); |
| tmp &= ~0x30000; |
| tmp |= 0x10000; |
| OUTREG(LVDS_PLL_CNTL, tmp); |
| |
| OUTPLL(pllSCLK_MORE_CNTL, rinfo->save_regs[34]); |
| OUTPLL(pllSS_TST_CNTL, rinfo->save_regs[91]); |
| |
| /* The trace reads that one here, waiting for something to settle down ? */ |
| INREG(RBBM_STATUS); |
| |
| /* Ugh ? SS_TST_DEC is supposed to be a read register in the |
| * R300 register spec at least... |
| */ |
| tmp = INPLL(pllSS_TST_CNTL); |
| tmp |= 0x00400000; |
| OUTPLL(pllSS_TST_CNTL, tmp); |
| } |
| |
| static void radeon_pm_restore_pixel_pll(struct radeonfb_info *rinfo) |
| { |
| u32 tmp; |
| |
| OUTREG8(CLOCK_CNTL_INDEX, pllHTOTAL_CNTL + PLL_WR_EN); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG8(CLOCK_CNTL_DATA, 0); |
| radeon_pll_errata_after_data(rinfo); |
| |
| tmp = INPLL(pllVCLK_ECP_CNTL); |
| OUTPLL(pllVCLK_ECP_CNTL, tmp | 0x80); |
| mdelay(5); |
| |
| tmp = INPLL(pllPPLL_REF_DIV); |
| tmp = (tmp & ~PPLL_REF_DIV_MASK) | rinfo->pll.ref_div; |
| OUTPLL(pllPPLL_REF_DIV, tmp); |
| INPLL(pllPPLL_REF_DIV); |
| |
| /* Reconfigure SPLL charge pump, VCO gain, duty cycle, |
| * probably useless since we already did it ... |
| */ |
| tmp = INPLL(pllPPLL_CNTL); |
| OUTREG8(CLOCK_CNTL_INDEX, pllSPLL_CNTL + PLL_WR_EN); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff); |
| radeon_pll_errata_after_data(rinfo); |
| |
| /* Restore our "reference" PPLL divider set by firmware |
| * according to proper spread spectrum calculations |
| */ |
| OUTPLL(pllPPLL_DIV_0, rinfo->save_regs[92]); |
| |
| tmp = INPLL(pllPPLL_CNTL); |
| OUTPLL(pllPPLL_CNTL, tmp & ~0x2); |
| mdelay(5); |
| |
| tmp = INPLL(pllPPLL_CNTL); |
| OUTPLL(pllPPLL_CNTL, tmp & ~0x1); |
| mdelay(5); |
| |
| tmp = INPLL(pllVCLK_ECP_CNTL); |
| OUTPLL(pllVCLK_ECP_CNTL, tmp | 3); |
| mdelay(5); |
| |
| tmp = INPLL(pllVCLK_ECP_CNTL); |
| OUTPLL(pllVCLK_ECP_CNTL, tmp | 3); |
| mdelay(5); |
| |
| /* Switch pixel clock to firmware default div 0 */ |
| OUTREG8(CLOCK_CNTL_INDEX+1, 0); |
| radeon_pll_errata_after_index(rinfo); |
| radeon_pll_errata_after_data(rinfo); |
| } |
| |
| static void radeon_pm_m10_reconfigure_mc(struct radeonfb_info *rinfo) |
| { |
| OUTREG(MC_CNTL, rinfo->save_regs[46]); |
| OUTREG(MC_INIT_GFX_LAT_TIMER, rinfo->save_regs[47]); |
| OUTREG(MC_INIT_MISC_LAT_TIMER, rinfo->save_regs[48]); |
| OUTREG(MEM_SDRAM_MODE_REG, |
| rinfo->save_regs[35] & ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE); |
| OUTREG(MC_TIMING_CNTL, rinfo->save_regs[49]); |
| OUTREG(MEM_REFRESH_CNTL, rinfo->save_regs[42]); |
| OUTREG(MC_READ_CNTL_AB, rinfo->save_regs[50]); |
| OUTREG(MC_CHIP_IO_OE_CNTL_AB, rinfo->save_regs[52]); |
| OUTREG(MC_IOPAD_CNTL, rinfo->save_regs[51]); |
| OUTREG(MC_DEBUG, rinfo->save_regs[53]); |
| |
| OUTMC(rinfo, ixR300_MC_MC_INIT_WR_LAT_TIMER, rinfo->save_regs[58]); |
| OUTMC(rinfo, ixR300_MC_IMP_CNTL, rinfo->save_regs[59]); |
| OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_C0, rinfo->save_regs[60]); |
| OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_C1, rinfo->save_regs[61]); |
| OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_D0, rinfo->save_regs[62]); |
| OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_D1, rinfo->save_regs[63]); |
| OUTMC(rinfo, ixR300_MC_BIST_CNTL_3, rinfo->save_regs[64]); |
| OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_A0, rinfo->save_regs[65]); |
| OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_A1, rinfo->save_regs[66]); |
| OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_B0, rinfo->save_regs[67]); |
| OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_B1, rinfo->save_regs[68]); |
| OUTMC(rinfo, ixR300_MC_DEBUG_CNTL, rinfo->save_regs[69]); |
| OUTMC(rinfo, ixR300_MC_DLL_CNTL, rinfo->save_regs[70]); |
| OUTMC(rinfo, ixR300_MC_IMP_CNTL_0, rinfo->save_regs[71]); |
| OUTMC(rinfo, ixR300_MC_ELPIDA_CNTL, rinfo->save_regs[72]); |
| OUTMC(rinfo, ixR300_MC_READ_CNTL_CD, rinfo->save_regs[96]); |
| OUTREG(MC_IND_INDEX, 0); |
| } |
| |
| static void radeon_reinitialize_M10(struct radeonfb_info *rinfo) |
| { |
| u32 tmp, i; |
| |
| /* Restore a bunch of registers first */ |
| OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]); |
| OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]); |
| OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); |
| OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]); |
| OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]); |
| OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); |
| OUTREG(BUS_CNTL, rinfo->save_regs[36]); |
| OUTREG(BUS_CNTL1, rinfo->save_regs[14]); |
| OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]); |
| OUTREG(FCP_CNTL, rinfo->save_regs[38]); |
| OUTREG(RBBM_CNTL, rinfo->save_regs[39]); |
| OUTREG(DAC_CNTL, rinfo->save_regs[40]); |
| OUTREG(DAC_MACRO_CNTL, (INREG(DAC_MACRO_CNTL) & ~0x6) | 8); |
| OUTREG(DAC_MACRO_CNTL, (INREG(DAC_MACRO_CNTL) & ~0x6) | 8); |
| |
| /* Hrm... */ |
| OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | DAC2_EXPAND_MODE); |
| |
| /* Reset the PAD CTLR */ |
| radeon_pm_reset_pad_ctlr_strength(rinfo); |
| |
| /* Some PLLs are Read & written identically in the trace here... |
| * I suppose it's actually to switch them all off & reset, |
| * let's assume off is what we want. I'm just doing that for all major PLLs now. |
| */ |
| radeon_pm_all_ppls_off(rinfo); |
| |
| /* Clear tiling, reset swappers */ |
| INREG(SURFACE_CNTL); |
| OUTREG(SURFACE_CNTL, 0); |
| |
| /* Some black magic with TV_DAC_CNTL, we should restore those from backups |
| * rather than hard coding... |
| */ |
| tmp = INREG(TV_DAC_CNTL) & ~TV_DAC_CNTL_BGADJ_MASK; |
| tmp |= 8 << TV_DAC_CNTL_BGADJ__SHIFT; |
| OUTREG(TV_DAC_CNTL, tmp); |
| |
| tmp = INREG(TV_DAC_CNTL) & ~TV_DAC_CNTL_DACADJ_MASK; |
| tmp |= 7 << TV_DAC_CNTL_DACADJ__SHIFT; |
| OUTREG(TV_DAC_CNTL, tmp); |
| |
| /* More registers restored */ |
| OUTREG(AGP_CNTL, rinfo->save_regs[16]); |
| OUTREG(HOST_PATH_CNTL, rinfo->save_regs[41]); |
| OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]); |
| |
| /* Hrmmm ... What is that ? */ |
| tmp = rinfo->save_regs[1] |
| & ~(CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK | |
| CLK_PWRMGT_CNTL__MC_BUSY); |
| OUTPLL(pllCLK_PWRMGT_CNTL, tmp); |
| |
| OUTREG(PAD_CTLR_MISC, rinfo->save_regs[56]); |
| OUTREG(FW_CNTL, rinfo->save_regs[57]); |
| OUTREG(HDP_DEBUG, rinfo->save_regs[96]); |
| OUTREG(PAMAC0_DLY_CNTL, rinfo->save_regs[54]); |
| OUTREG(PAMAC1_DLY_CNTL, rinfo->save_regs[55]); |
| OUTREG(PAMAC2_DLY_CNTL, rinfo->save_regs[79]); |
| |
| /* Restore Memory Controller configuration */ |
| radeon_pm_m10_reconfigure_mc(rinfo); |
| |
| /* Make sure CRTC's dont touch memory */ |
| OUTREG(CRTC_GEN_CNTL, INREG(CRTC_GEN_CNTL) |
| | CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B); |
| OUTREG(CRTC2_GEN_CNTL, INREG(CRTC2_GEN_CNTL) |
| | CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B); |
| mdelay(30); |
| |
| /* Disable SDRAM refresh */ |
| OUTREG(MEM_REFRESH_CNTL, INREG(MEM_REFRESH_CNTL) |
| | MEM_REFRESH_CNTL__MEM_REFRESH_DIS); |
| |
| /* Restore XTALIN routing (CLK_PIN_CNTL) */ |
| OUTPLL(pllCLK_PIN_CNTL, rinfo->save_regs[4]); |
| |
| /* Switch MCLK, YCLK and SCLK PLLs to PCI source & force them ON */ |
| tmp = rinfo->save_regs[2] & 0xff000000; |
| tmp |= MCLK_CNTL__FORCE_MCLKA | |
| MCLK_CNTL__FORCE_MCLKB | |
| MCLK_CNTL__FORCE_YCLKA | |
| MCLK_CNTL__FORCE_YCLKB | |
| MCLK_CNTL__FORCE_MC; |
| OUTPLL(pllMCLK_CNTL, tmp); |
| |
| /* Force all clocks on in SCLK */ |
| tmp = INPLL(pllSCLK_CNTL); |
| tmp |= SCLK_CNTL__FORCE_DISP2| |
| SCLK_CNTL__FORCE_CP| |
| SCLK_CNTL__FORCE_HDP| |
| SCLK_CNTL__FORCE_DISP1| |
| SCLK_CNTL__FORCE_TOP| |
| SCLK_CNTL__FORCE_E2| |
| SCLK_CNTL__FORCE_SE| |
| SCLK_CNTL__FORCE_IDCT| |
| SCLK_CNTL__FORCE_VIP| |
| SCLK_CNTL__FORCE_PB| |
| SCLK_CNTL__FORCE_TAM| |
| SCLK_CNTL__FORCE_TDM| |
| SCLK_CNTL__FORCE_RB| |
| SCLK_CNTL__FORCE_TV_SCLK| |
| SCLK_CNTL__FORCE_SUBPIC| |
| SCLK_CNTL__FORCE_OV0; |
| tmp |= SCLK_CNTL__CP_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__HDP_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__TV_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__E2_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__SE_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__IDCT_MAX_DYN_STOP_LAT| |
| SCLK_CNTL__VIP_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__RE_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__PB_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__TAM_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__TDM_MAX_DYN_STOP_LAT | |
| SCLK_CNTL__RB_MAX_DYN_STOP_LAT; |
| OUTPLL(pllSCLK_CNTL, tmp); |
| |
| OUTPLL(pllVCLK_ECP_CNTL, 0); |
| OUTPLL(pllPIXCLKS_CNTL, 0); |
| OUTPLL(pllMCLK_MISC, |
| MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT | |
| MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT); |
| |
| mdelay(5); |
| |
| /* Restore the M_SPLL_REF_FB_DIV, MPLL_AUX_CNTL and SPLL_AUX_CNTL values */ |
| OUTPLL(pllM_SPLL_REF_FB_DIV, rinfo->save_regs[77]); |
| OUTPLL(pllMPLL_AUX_CNTL, rinfo->save_regs[75]); |
| OUTPLL(pllSPLL_AUX_CNTL, rinfo->save_regs[76]); |
| |
| /* Now restore the major PLLs settings, keeping them off & reset though */ |
| OUTPLL(pllPPLL_CNTL, rinfo->save_regs[93] | 0x3); |
| OUTPLL(pllP2PLL_CNTL, rinfo->save_regs[8] | 0x3); |
| OUTPLL(pllMPLL_CNTL, rinfo->save_regs[73] | 0x03); |
| OUTPLL(pllSPLL_CNTL, rinfo->save_regs[74] | 0x03); |
| |
| /* Restore MC DLL state and switch it off/reset too */ |
| OUTMC(rinfo, ixR300_MC_DLL_CNTL, rinfo->save_regs[70]); |
| |
| /* Switch MDLL off & reset */ |
| OUTPLL(pllMDLL_RDCKA, rinfo->save_regs[98] | 0xff); |
| mdelay(5); |
| |
| /* Setup some black magic bits in PLL_PWRMGT_CNTL. Hrm... we saved |
| * 0xa1100007... and MacOS writes 0xa1000007 .. |
| */ |
| OUTPLL(pllPLL_PWRMGT_CNTL, rinfo->save_regs[0]); |
| |
| /* Restore more stuffs */ |
| OUTPLL(pllHTOTAL_CNTL, 0); |
| OUTPLL(pllHTOTAL2_CNTL, 0); |
| |
| /* More PLL initial configuration */ |
| tmp = INPLL(pllSCLK_CNTL2); /* What for ? */ |
| OUTPLL(pllSCLK_CNTL2, tmp); |
| |
| tmp = INPLL(pllSCLK_MORE_CNTL); |
| tmp |= SCLK_MORE_CNTL__FORCE_DISPREGS | /* a guess */ |
| SCLK_MORE_CNTL__FORCE_MC_GUI | |
| SCLK_MORE_CNTL__FORCE_MC_HOST; |
| OUTPLL(pllSCLK_MORE_CNTL, tmp); |
| |
| /* Now we actually start MCLK and SCLK */ |
| radeon_pm_start_mclk_sclk(rinfo); |
| |
| /* Full reset sdrams, this also re-inits the MDLL */ |
| radeon_pm_full_reset_sdram(rinfo); |
| |
| /* Fill palettes */ |
| OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | 0x20); |
| for (i=0; i<256; i++) |
| OUTREG(PALETTE_30_DATA, 0x15555555); |
| OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) & ~20); |
| udelay(20); |
| for (i=0; i<256; i++) |
| OUTREG(PALETTE_30_DATA, 0x15555555); |
| |
| OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) & ~0x20); |
| mdelay(3); |
| |
| /* Restore TMDS */ |
| OUTREG(FP_GEN_CNTL, rinfo->save_regs[82]); |
| OUTREG(FP2_GEN_CNTL, rinfo->save_regs[83]); |
| |
| /* Set LVDS registers but keep interface & pll down */ |
| OUTREG(LVDS_GEN_CNTL, rinfo->save_regs[11] & |
| ~(LVDS_EN | LVDS_ON | LVDS_DIGON | LVDS_BLON | LVDS_BL_MOD_EN)); |
| OUTREG(LVDS_PLL_CNTL, (rinfo->save_regs[12] & ~0xf0000) | 0x20000); |
| |
| OUTREG(DISP_OUTPUT_CNTL, rinfo->save_regs[86]); |
| |
| /* Restore GPIOPAD state */ |
| OUTREG(GPIOPAD_A, rinfo->save_regs[19]); |
| OUTREG(GPIOPAD_EN, rinfo->save_regs[20]); |
| OUTREG(GPIOPAD_MASK, rinfo->save_regs[21]); |
| |
| /* write some stuff to the framebuffer... */ |
| for (i = 0; i < 0x8000; ++i) |
| writeb(0, rinfo->fb_base + i); |
| |
| mdelay(40); |
| OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) | LVDS_DIGON | LVDS_ON); |
| mdelay(40); |
| |
| /* Restore a few more things */ |
| OUTREG(GRPH_BUFFER_CNTL, rinfo->save_regs[94]); |
| OUTREG(GRPH2_BUFFER_CNTL, rinfo->save_regs[95]); |
| |
| /* Take care of spread spectrum & PPLLs now */ |
| radeon_pm_m10_disable_spread_spectrum(rinfo); |
| radeon_pm_restore_pixel_pll(rinfo); |
| |
| /* GRRRR... I can't figure out the proper LVDS power sequence, and the |
| * code I have for blank/unblank doesn't quite work on some laptop models |
| * it seems ... Hrm. What I have here works most of the time ... |
| */ |
| radeon_pm_m10_enable_lvds_spread_spectrum(rinfo); |
| } |
| |
| #ifdef CONFIG_PPC_OF |
| |
| static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo) |
| { |
| OUTREG(MC_CNTL, rinfo->save_regs[46]); |
| OUTREG(MC_INIT_GFX_LAT_TIMER, rinfo->save_regs[47]); |
| OUTREG(MC_INIT_MISC_LAT_TIMER, rinfo->save_regs[48]); |
| OUTREG(MEM_SDRAM_MODE_REG, |
| rinfo->save_regs[35] & ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE); |
| OUTREG(MC_TIMING_CNTL, rinfo->save_regs[49]); |
| OUTREG(MC_READ_CNTL_AB, rinfo->save_regs[50]); |
| OUTREG(MEM_REFRESH_CNTL, rinfo->save_regs[42]); |
| OUTREG(MC_IOPAD_CNTL, rinfo->save_regs[51]); |
| OUTREG(MC_DEBUG, rinfo->save_regs[53]); |
| OUTREG(MC_CHIP_IO_OE_CNTL_AB, rinfo->save_regs[52]); |
| |
| OUTMC(rinfo, ixMC_IMP_CNTL, rinfo->save_regs[59] /*0x00f460d6*/); |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_A0, rinfo->save_regs[65] /*0xfecfa666*/); |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_A1, rinfo->save_regs[66] /*0x141555ff*/); |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_B0, rinfo->save_regs[67] /*0xfecfa666*/); |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, rinfo->save_regs[68] /*0x141555ff*/); |
| OUTMC(rinfo, ixMC_IMP_CNTL_0, rinfo->save_regs[71] /*0x00009249*/); |
| OUTREG(MC_IND_INDEX, 0); |
| OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); |
| |
| mdelay(20); |
| } |
| |
| static void radeon_reinitialize_M9P(struct radeonfb_info *rinfo) |
| { |
| u32 tmp, i; |
| |
| /* Restore a bunch of registers first */ |
| OUTREG(SURFACE_CNTL, rinfo->save_regs[29]); |
| OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]); |
| OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]); |
| OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); |
| OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]); |
| OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]); |
| OUTREG(BUS_CNTL, rinfo->save_regs[36]); |
| OUTREG(BUS_CNTL1, rinfo->save_regs[14]); |
| OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]); |
| OUTREG(FCP_CNTL, rinfo->save_regs[38]); |
| OUTREG(RBBM_CNTL, rinfo->save_regs[39]); |
| |
| OUTREG(DAC_CNTL, rinfo->save_regs[40]); |
| OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | DAC2_EXPAND_MODE); |
| |
| /* Reset the PAD CTLR */ |
| radeon_pm_reset_pad_ctlr_strength(rinfo); |
| |
| /* Some PLLs are Read & written identically in the trace here... |
| * I suppose it's actually to switch them all off & reset, |
| * let's assume off is what we want. I'm just doing that for all major PLLs now. |
| */ |
| radeon_pm_all_ppls_off(rinfo); |
| |
| /* Clear tiling, reset swappers */ |
| INREG(SURFACE_CNTL); |
| OUTREG(SURFACE_CNTL, 0); |
| |
| /* Some black magic with TV_DAC_CNTL, we should restore those from backups |
| * rather than hard coding... |
| */ |
| tmp = INREG(TV_DAC_CNTL) & ~TV_DAC_CNTL_BGADJ_MASK; |
| tmp |= 6 << TV_DAC_CNTL_BGADJ__SHIFT; |
| OUTREG(TV_DAC_CNTL, tmp); |
| |
| tmp = INREG(TV_DAC_CNTL) & ~TV_DAC_CNTL_DACADJ_MASK; |
| tmp |= 6 << TV_DAC_CNTL_DACADJ__SHIFT; |
| OUTREG(TV_DAC_CNTL, tmp); |
| |
| OUTPLL(pllAGP_PLL_CNTL, rinfo->save_regs[78]); |
| |
| OUTREG(PAMAC0_DLY_CNTL, rinfo->save_regs[54]); |
| OUTREG(PAMAC1_DLY_CNTL, rinfo->save_regs[55]); |
| OUTREG(PAMAC2_DLY_CNTL, rinfo->save_regs[79]); |
| |
| OUTREG(AGP_CNTL, rinfo->save_regs[16]); |
| OUTREG(HOST_PATH_CNTL, rinfo->save_regs[41]); /* MacOS sets that to 0 !!! */ |
| OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]); |
| |
| tmp = rinfo->save_regs[1] |
| & ~(CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK | |
| CLK_PWRMGT_CNTL__MC_BUSY); |
| OUTPLL(pllCLK_PWRMGT_CNTL, tmp); |
| |
| OUTREG(FW_CNTL, rinfo->save_regs[57]); |
| |
| /* Disable SDRAM refresh */ |
| OUTREG(MEM_REFRESH_CNTL, INREG(MEM_REFRESH_CNTL) |
| | MEM_REFRESH_CNTL__MEM_REFRESH_DIS); |
| |
| /* Restore XTALIN routing (CLK_PIN_CNTL) */ |
| OUTPLL(pllCLK_PIN_CNTL, rinfo->save_regs[4]); |
| |
| /* Force MCLK to be PCI sourced and forced ON */ |
| tmp = rinfo->save_regs[2] & 0xff000000; |
| tmp |= MCLK_CNTL__FORCE_MCLKA | |
| MCLK_CNTL__FORCE_MCLKB | |
| MCLK_CNTL__FORCE_YCLKA | |
| MCLK_CNTL__FORCE_YCLKB | |
| MCLK_CNTL__FORCE_MC | |
| MCLK_CNTL__FORCE_AIC; |
| OUTPLL(pllMCLK_CNTL, tmp); |
| |
| /* Force SCLK to be PCI sourced with a bunch forced */ |
| tmp = 0 | |
| SCLK_CNTL__FORCE_DISP2| |
| SCLK_CNTL__FORCE_CP| |
| SCLK_CNTL__FORCE_HDP| |
| SCLK_CNTL__FORCE_DISP1| |
| SCLK_CNTL__FORCE_TOP| |
| SCLK_CNTL__FORCE_E2| |
| SCLK_CNTL__FORCE_SE| |
| SCLK_CNTL__FORCE_IDCT| |
| SCLK_CNTL__FORCE_VIP| |
| SCLK_CNTL__FORCE_RE| |
| SCLK_CNTL__FORCE_PB| |
| SCLK_CNTL__FORCE_TAM| |
| SCLK_CNTL__FORCE_TDM| |
| SCLK_CNTL__FORCE_RB; |
| OUTPLL(pllSCLK_CNTL, tmp); |
| |
| /* Clear VCLK_ECP_CNTL & PIXCLKS_CNTL */ |
| OUTPLL(pllVCLK_ECP_CNTL, 0); |
| OUTPLL(pllPIXCLKS_CNTL, 0); |
| |
| /* Setup MCLK_MISC, non dynamic mode */ |
| OUTPLL(pllMCLK_MISC, |
| MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT | |
| MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT); |
| |
| mdelay(5); |
| |
| /* Set back the default clock dividers */ |
| OUTPLL(pllM_SPLL_REF_FB_DIV, rinfo->save_regs[77]); |
| OUTPLL(pllMPLL_AUX_CNTL, rinfo->save_regs[75]); |
| OUTPLL(pllSPLL_AUX_CNTL, rinfo->save_regs[76]); |
| |
| /* PPLL and P2PLL default values & off */ |
| OUTPLL(pllPPLL_CNTL, rinfo->save_regs[93] | 0x3); |
| OUTPLL(pllP2PLL_CNTL, rinfo->save_regs[8] | 0x3); |
| |
| /* S and M PLLs are reset & off, configure them */ |
| OUTPLL(pllMPLL_CNTL, rinfo->save_regs[73] | 0x03); |
| OUTPLL(pllSPLL_CNTL, rinfo->save_regs[74] | 0x03); |
| |
| /* Default values for MDLL ... fixme */ |
| OUTPLL(pllMDLL_CKO, 0x9c009c); |
| OUTPLL(pllMDLL_RDCKA, 0x08830883); |
| OUTPLL(pllMDLL_RDCKB, 0x08830883); |
| mdelay(5); |
| |
| /* Restore PLL_PWRMGT_CNTL */ // XXXX |
| tmp = rinfo->save_regs[0]; |
| tmp &= ~PLL_PWRMGT_CNTL_SU_SCLK_USE_BCLK; |
| tmp |= PLL_PWRMGT_CNTL_SU_MCLK_USE_BCLK; |
| OUTPLL(PLL_PWRMGT_CNTL, tmp); |
| |
| /* Clear HTOTAL_CNTL & HTOTAL2_CNTL */ |
| OUTPLL(pllHTOTAL_CNTL, 0); |
| OUTPLL(pllHTOTAL2_CNTL, 0); |
| |
| /* All outputs off */ |
| OUTREG(CRTC_GEN_CNTL, 0x04000000); |
| OUTREG(CRTC2_GEN_CNTL, 0x04000000); |
| OUTREG(FP_GEN_CNTL, 0x00004008); |
| OUTREG(FP2_GEN_CNTL, 0x00000008); |
| OUTREG(LVDS_GEN_CNTL, 0x08000008); |
| |
| /* Restore Memory Controller configuration */ |
| radeon_pm_m9p_reconfigure_mc(rinfo); |
| |
| /* Now we actually start MCLK and SCLK */ |
| radeon_pm_start_mclk_sclk(rinfo); |
| |
| /* Full reset sdrams, this also re-inits the MDLL */ |
| radeon_pm_full_reset_sdram(rinfo); |
| |
| /* Fill palettes */ |
| OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | 0x20); |
| for (i=0; i<256; i++) |
| OUTREG(PALETTE_30_DATA, 0x15555555); |
| OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) & ~20); |
| udelay(20); |
| for (i=0; i<256; i++) |
| OUTREG(PALETTE_30_DATA, 0x15555555); |
| |
| OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) & ~0x20); |
| mdelay(3); |
| |
| /* Restore TV stuff, make sure TV DAC is down */ |
| OUTREG(TV_MASTER_CNTL, rinfo->save_regs[88]); |
| OUTREG(TV_DAC_CNTL, rinfo->save_regs[13] | 0x07000000); |
| |
| /* Restore GPIOS. MacOS does some magic here with one of the GPIO bits, |
| * possibly related to the weird PLL related workarounds and to the |
| * fact that CLK_PIN_CNTL is tweaked in ways I don't fully understand, |
| * but we keep things the simple way here |
| */ |
| OUTREG(GPIOPAD_A, rinfo->save_regs[19]); |
| OUTREG(GPIOPAD_EN, rinfo->save_regs[20]); |
| OUTREG(GPIOPAD_MASK, rinfo->save_regs[21]); |
| |
| /* Now do things with SCLK_MORE_CNTL. Force bits are already set, copy |
| * high bits from backup |
| */ |
| tmp = INPLL(pllSCLK_MORE_CNTL) & 0x0000ffff; |
| tmp |= rinfo->save_regs[34] & 0xffff0000; |
| tmp |= SCLK_MORE_CNTL__FORCE_DISPREGS; |
| OUTPLL(pllSCLK_MORE_CNTL, tmp); |
| |
| tmp = INPLL(pllSCLK_MORE_CNTL) & 0x0000ffff; |
| tmp |= rinfo->save_regs[34] & 0xffff0000; |
| tmp |= SCLK_MORE_CNTL__FORCE_DISPREGS; |
| OUTPLL(pllSCLK_MORE_CNTL, tmp); |
| |
| OUTREG(LVDS_GEN_CNTL, rinfo->save_regs[11] & |
| ~(LVDS_EN | LVDS_ON | LVDS_DIGON | LVDS_BLON | LVDS_BL_MOD_EN)); |
| OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) | LVDS_BLON); |
| OUTREG(LVDS_PLL_CNTL, (rinfo->save_regs[12] & ~0xf0000) | 0x20000); |
| mdelay(20); |
| |
| /* write some stuff to the framebuffer... */ |
| for (i = 0; i < 0x8000; ++i) |
| writeb(0, rinfo->fb_base + i); |
| |
| OUTREG(0x2ec, 0x6332a020); |
| OUTPLL(pllSSPLL_REF_DIV, rinfo->save_regs[44] /*0x3f */); |
| OUTPLL(pllSSPLL_DIV_0, rinfo->save_regs[45] /*0x000081bb */); |
| tmp = INPLL(pllSSPLL_CNTL); |
| tmp &= ~2; |
| OUTPLL(pllSSPLL_CNTL, tmp); |
| mdelay(6); |
| tmp &= ~1; |
| OUTPLL(pllSSPLL_CNTL, tmp); |
| mdelay(5); |
| tmp |= 3; |
| OUTPLL(pllSSPLL_CNTL, tmp); |
| mdelay(5); |
| |
| OUTPLL(pllSS_INT_CNTL, rinfo->save_regs[90] & ~3);/*0x0020300c*/ |
| OUTREG(0x2ec, 0x6332a3f0); |
| mdelay(17); |
| |
| OUTPLL(pllPPLL_REF_DIV, rinfo->pll.ref_div); |
| OUTPLL(pllPPLL_DIV_0, rinfo->save_regs[92]); |
| |
| mdelay(40); |
| OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) | LVDS_DIGON | LVDS_ON); |
| mdelay(40); |
| |
| /* Restore a few more things */ |
| OUTREG(GRPH_BUFFER_CNTL, rinfo->save_regs[94]); |
| OUTREG(GRPH2_BUFFER_CNTL, rinfo->save_regs[95]); |
| |
| /* Restore PPLL, spread spectrum & LVDS */ |
| radeon_pm_m10_disable_spread_spectrum(rinfo); |
| radeon_pm_restore_pixel_pll(rinfo); |
| radeon_pm_m10_enable_lvds_spread_spectrum(rinfo); |
| } |
| |
| #if 0 /* Not ready yet */ |
| static void radeon_reinitialize_QW(struct radeonfb_info *rinfo) |
| { |
| int i; |
| u32 tmp, tmp2; |
| u32 cko, cka, ckb; |
| u32 cgc, cec, c2gc; |
| |
| OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]); |
| OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]); |
| OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]); |
| OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]); |
| OUTREG(BUS_CNTL, rinfo->save_regs[36]); |
| OUTREG(RBBM_CNTL, rinfo->save_regs[39]); |
| |
| INREG(PAD_CTLR_STRENGTH); |
| OUTREG(PAD_CTLR_STRENGTH, INREG(PAD_CTLR_STRENGTH) & ~0x10000); |
| for (i = 0; i < 65; ++i) { |
| mdelay(1); |
| INREG(PAD_CTLR_STRENGTH); |
| } |
| |
| OUTREG(DISP_TEST_DEBUG_CNTL, INREG(DISP_TEST_DEBUG_CNTL) | 0x10000000); |
| OUTREG(OV0_FLAG_CNTRL, INREG(OV0_FLAG_CNTRL) | 0x100); |
| OUTREG(CRTC_GEN_CNTL, INREG(CRTC_GEN_CNTL)); |
| OUTREG(DAC_CNTL, 0xff00410a); |
| OUTREG(CRTC2_GEN_CNTL, INREG(CRTC2_GEN_CNTL)); |
| OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | 0x4000); |
| |
| OUTREG(SURFACE_CNTL, rinfo->save_regs[29]); |
| OUTREG(AGP_CNTL, rinfo->save_regs[16]); |
| OUTREG(HOST_PATH_CNTL, rinfo->save_regs[41]); |
| OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]); |
| |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_A0, 0xf7bb4433); |
| OUTREG(MC_IND_INDEX, 0); |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_B0, 0xf7bb4433); |
| OUTREG(MC_IND_INDEX, 0); |
| |
| OUTREG(CRTC_MORE_CNTL, INREG(CRTC_MORE_CNTL)); |
| |
| tmp = INPLL(pllVCLK_ECP_CNTL); |
| OUTPLL(pllVCLK_ECP_CNTL, tmp); |
| tmp = INPLL(pllPIXCLKS_CNTL); |
| OUTPLL(pllPIXCLKS_CNTL, tmp); |
| |
| OUTPLL(MCLK_CNTL, 0xaa3f0000); |
| OUTPLL(SCLK_CNTL, 0xffff0000); |
| OUTPLL(pllMPLL_AUX_CNTL, 6); |
| OUTPLL(pllSPLL_AUX_CNTL, 1); |
| OUTPLL(MDLL_CKO, 0x9f009f); |
| OUTPLL(MDLL_RDCKA, 0x830083); |
| OUTPLL(pllMDLL_RDCKB, 0x830083); |
| OUTPLL(PPLL_CNTL, 0xa433); |
| OUTPLL(P2PLL_CNTL, 0xa433); |
| OUTPLL(MPLL_CNTL, 0x0400a403); |
| OUTPLL(SPLL_CNTL, 0x0400a433); |
| |
| tmp = INPLL(M_SPLL_REF_FB_DIV); |
| OUTPLL(M_SPLL_REF_FB_DIV, tmp); |
| tmp = INPLL(M_SPLL_REF_FB_DIV); |
| OUTPLL(M_SPLL_REF_FB_DIV, tmp | 0xc); |
| INPLL(M_SPLL_REF_FB_DIV); |
| |
| tmp = INPLL(MPLL_CNTL); |
| OUTREG8(CLOCK_CNTL_INDEX, MPLL_CNTL + PLL_WR_EN); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff); |
| radeon_pll_errata_after_data(rinfo); |
| |
| tmp = INPLL(M_SPLL_REF_FB_DIV); |
| OUTPLL(M_SPLL_REF_FB_DIV, tmp | 0x5900); |
| |
| tmp = INPLL(MPLL_CNTL); |
| OUTPLL(MPLL_CNTL, tmp & ~0x2); |
| mdelay(1); |
| tmp = INPLL(MPLL_CNTL); |
| OUTPLL(MPLL_CNTL, tmp & ~0x1); |
| mdelay(10); |
| |
| OUTPLL(MCLK_CNTL, 0xaa3f1212); |
| mdelay(1); |
| |
| INPLL(M_SPLL_REF_FB_DIV); |
| INPLL(MCLK_CNTL); |
| INPLL(M_SPLL_REF_FB_DIV); |
| |
| tmp = INPLL(SPLL_CNTL); |
| OUTREG8(CLOCK_CNTL_INDEX, SPLL_CNTL + PLL_WR_EN); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff); |
| radeon_pll_errata_after_data(rinfo); |
| |
| tmp = INPLL(M_SPLL_REF_FB_DIV); |
| OUTPLL(M_SPLL_REF_FB_DIV, tmp | 0x780000); |
| |
| tmp = INPLL(SPLL_CNTL); |
| OUTPLL(SPLL_CNTL, tmp & ~0x1); |
| mdelay(1); |
| tmp = INPLL(SPLL_CNTL); |
| OUTPLL(SPLL_CNTL, tmp & ~0x2); |
| mdelay(10); |
| |
| tmp = INPLL(SCLK_CNTL); |
| OUTPLL(SCLK_CNTL, tmp | 2); |
| mdelay(1); |
| |
| cko = INPLL(pllMDLL_CKO); |
| cka = INPLL(pllMDLL_RDCKA); |
| ckb = INPLL(pllMDLL_RDCKB); |
| |
| cko &= ~(MDLL_CKO__MCKOA_SLEEP | MDLL_CKO__MCKOB_SLEEP); |
| OUTPLL(pllMDLL_CKO, cko); |
| mdelay(1); |
| cko &= ~(MDLL_CKO__MCKOA_RESET | MDLL_CKO__MCKOB_RESET); |
| OUTPLL(pllMDLL_CKO, cko); |
| mdelay(5); |
| |
| cka &= ~(MDLL_RDCKA__MRDCKA0_SLEEP | MDLL_RDCKA__MRDCKA1_SLEEP); |
| OUTPLL(pllMDLL_RDCKA, cka); |
| mdelay(1); |
| cka &= ~(MDLL_RDCKA__MRDCKA0_RESET | MDLL_RDCKA__MRDCKA1_RESET); |
| OUTPLL(pllMDLL_RDCKA, cka); |
| mdelay(5); |
| |
| ckb &= ~(MDLL_RDCKB__MRDCKB0_SLEEP | MDLL_RDCKB__MRDCKB1_SLEEP); |
| OUTPLL(pllMDLL_RDCKB, ckb); |
| mdelay(1); |
| ckb &= ~(MDLL_RDCKB__MRDCKB0_RESET | MDLL_RDCKB__MRDCKB1_RESET); |
| OUTPLL(pllMDLL_RDCKB, ckb); |
| mdelay(5); |
| |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_A1, 0x151550ff); |
| OUTREG(MC_IND_INDEX, 0); |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, 0x151550ff); |
| OUTREG(MC_IND_INDEX, 0); |
| mdelay(1); |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_A1, 0x141550ff); |
| OUTREG(MC_IND_INDEX, 0); |
| OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, 0x141550ff); |
| OUTREG(MC_IND_INDEX, 0); |
| mdelay(1); |
| |
| OUTPLL(pllHTOTAL_CNTL, 0); |
| OUTPLL(pllHTOTAL2_CNTL, 0); |
| |
| OUTREG(MEM_CNTL, 0x29002901); |
| OUTREG(MEM_SDRAM_MODE_REG, 0x45320032); /* XXX use save_regs[35]? */ |
| OUTREG(EXT_MEM_CNTL, 0x1a394333); |
| OUTREG(MEM_IO_CNTL_A1, 0x0aac0aac); |
| OUTREG(MEM_INIT_LATENCY_TIMER, 0x34444444); |
| OUTREG(MEM_REFRESH_CNTL, 0x1f1f7218); /* XXX or save_regs[42]? */ |
| OUTREG(MC_DEBUG, 0); |
| OUTREG(MEM_IO_OE_CNTL, 0x04300430); |
| |
| OUTMC(rinfo, ixMC_IMP_CNTL, 0x00f460d6); |
| OUTREG(MC_IND_INDEX, 0); |
| OUTMC(rinfo, ixMC_IMP_CNTL_0, 0x00009249); |
| OUTREG(MC_IND_INDEX, 0); |
| |
| OUTREG(CONFIG_MEMSIZE, rinfo->video_ram); |
| |
| radeon_pm_full_reset_sdram(rinfo); |
| |
| INREG(FP_GEN_CNTL); |
| OUTREG(TMDS_CNTL, 0x01000000); /* XXX ? */ |
| tmp = INREG(FP_GEN_CNTL); |
| tmp |= FP_CRTC_DONT_SHADOW_HEND | FP_CRTC_DONT_SHADOW_VPAR | 0x200; |
| OUTREG(FP_GEN_CNTL, tmp); |
| |
| tmp = INREG(DISP_OUTPUT_CNTL); |
| tmp &= ~0x400; |
| OUTREG(DISP_OUTPUT_CNTL, tmp); |
| |
| OUTPLL(CLK_PIN_CNTL, rinfo->save_regs[4]); |
| OUTPLL(CLK_PWRMGT_CNTL, rinfo->save_regs[1]); |
| OUTPLL(PLL_PWRMGT_CNTL, rinfo->save_regs[0]); |
| |
| tmp = INPLL(MCLK_MISC); |
| tmp |= MCLK_MISC__MC_MCLK_DYN_ENABLE | MCLK_MISC__IO_MCLK_DYN_ENABLE; |
| OUTPLL(MCLK_MISC, tmp); |
| |
| tmp = INPLL(SCLK_CNTL); |
| OUTPLL(SCLK_CNTL, tmp); |
| |
| OUTREG(CRTC_MORE_CNTL, 0); |
| OUTREG8(CRTC_GEN_CNTL+1, 6); |
| OUTREG8(CRTC_GEN_CNTL+3, 1); |
| OUTREG(CRTC_PITCH, 32); |
| |
| tmp = INPLL(VCLK_ECP_CNTL); |
| OUTPLL(VCLK_ECP_CNTL, tmp); |
| |
| tmp = INPLL(PPLL_CNTL); |
| OUTPLL(PPLL_CNTL, tmp); |
| |
| /* palette stuff and BIOS_1_SCRATCH... */ |
| |
| tmp = INREG(FP_GEN_CNTL); |
| tmp2 = INREG(TMDS_TRANSMITTER_CNTL); |
| tmp |= 2; |
| OUTREG(FP_GEN_CNTL, tmp); |
| mdelay(5); |
| OUTREG(FP_GEN_CNTL, tmp); |
| mdelay(5); |
| OUTREG(TMDS_TRANSMITTER_CNTL, tmp2); |
| OUTREG(CRTC_MORE_CNTL, 0); |
| mdelay(20); |
| |
| tmp = INREG(CRTC_MORE_CNTL); |
| OUTREG(CRTC_MORE_CNTL, tmp); |
| |
| cgc = INREG(CRTC_GEN_CNTL); |
| cec = INREG(CRTC_EXT_CNTL); |
| c2gc = INREG(CRTC2_GEN_CNTL); |
| |
| OUTREG(CRTC_H_SYNC_STRT_WID, 0x008e0580); |
| OUTREG(CRTC_H_TOTAL_DISP, 0x009f00d2); |
| OUTREG8(CLOCK_CNTL_INDEX, HTOTAL_CNTL + PLL_WR_EN); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG8(CLOCK_CNTL_DATA, 0); |
| radeon_pll_errata_after_data(rinfo); |
| OUTREG(CRTC_V_SYNC_STRT_WID, 0x00830403); |
| OUTREG(CRTC_V_TOTAL_DISP, 0x03ff0429); |
| OUTREG(FP_CRTC_H_TOTAL_DISP, 0x009f0033); |
| OUTREG(FP_H_SYNC_STRT_WID, 0x008e0080); |
| OUTREG(CRT_CRTC_H_SYNC_STRT_WID, 0x008e0080); |
| OUTREG(FP_CRTC_V_TOTAL_DISP, 0x03ff002a); |
| OUTREG(FP_V_SYNC_STRT_WID, 0x00830004); |
| OUTREG(CRT_CRTC_V_SYNC_STRT_WID, 0x00830004); |
| OUTREG(FP_HORZ_VERT_ACTIVE, 0x009f03ff); |
| OUTREG(FP_HORZ_STRETCH, 0); |
| OUTREG(FP_VERT_STRETCH, 0); |
| OUTREG(OVR_CLR, 0); |
| OUTREG(OVR_WID_LEFT_RIGHT, 0); |
| OUTREG(OVR_WID_TOP_BOTTOM, 0); |
| |
| tmp = INPLL(PPLL_REF_DIV); |
| tmp = (tmp & ~PPLL_REF_DIV_MASK) | rinfo->pll.ref_div; |
| OUTPLL(PPLL_REF_DIV, tmp); |
| INPLL(PPLL_REF_DIV); |
| |
| OUTREG8(CLOCK_CNTL_INDEX, PPLL_CNTL + PLL_WR_EN); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG8(CLOCK_CNTL_DATA + 1, 0xbc); |
| radeon_pll_errata_after_data(rinfo); |
| |
| tmp = INREG(CLOCK_CNTL_INDEX); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG(CLOCK_CNTL_INDEX, tmp & 0xff); |
| radeon_pll_errata_after_index(rinfo); |
| radeon_pll_errata_after_data(rinfo); |
| |
| OUTPLL(PPLL_DIV_0, 0x48090); |
| |
| tmp = INPLL(PPLL_CNTL); |
| OUTPLL(PPLL_CNTL, tmp & ~0x2); |
| mdelay(1); |
| tmp = INPLL(PPLL_CNTL); |
| OUTPLL(PPLL_CNTL, tmp & ~0x1); |
| mdelay(10); |
| |
| tmp = INPLL(VCLK_ECP_CNTL); |
| OUTPLL(VCLK_ECP_CNTL, tmp | 3); |
| mdelay(1); |
| |
| tmp = INPLL(VCLK_ECP_CNTL); |
| OUTPLL(VCLK_ECP_CNTL, tmp); |
| |
| c2gc |= CRTC2_DISP_REQ_EN_B; |
| OUTREG(CRTC2_GEN_CNTL, c2gc); |
| cgc |= CRTC_EN; |
| OUTREG(CRTC_GEN_CNTL, cgc); |
| OUTREG(CRTC_EXT_CNTL, cec); |
| OUTREG(CRTC_PITCH, 0xa0); |
| OUTREG(CRTC_OFFSET, 0); |
| OUTREG(CRTC_OFFSET_CNTL, 0); |
| |
| OUTREG(GRPH_BUFFER_CNTL, 0x20117c7c); |
| OUTREG(GRPH2_BUFFER_CNTL, 0x00205c5c); |
| |
| tmp2 = INREG(FP_GEN_CNTL); |
| tmp = INREG(TMDS_TRANSMITTER_CNTL); |
| OUTREG(0x2a8, 0x0000061b); |
| tmp |= TMDS_PLL_EN; |
| OUTREG(TMDS_TRANSMITTER_CNTL, tmp); |
| mdelay(1); |
| tmp &= ~TMDS_PLLRST; |
| OUTREG(TMDS_TRANSMITTER_CNTL, tmp); |
| tmp2 &= ~2; |
| tmp2 |= FP_TMDS_EN; |
| OUTREG(FP_GEN_CNTL, tmp2); |
| mdelay(5); |
| tmp2 |= FP_FPON; |
| OUTREG(FP_GEN_CNTL, tmp2); |
| |
| OUTREG(CUR_HORZ_VERT_OFF, CUR_LOCK | 1); |
| cgc = INREG(CRTC_GEN_CNTL); |
| OUTREG(CUR_HORZ_VERT_POSN, 0xbfff0fff); |
| cgc |= 0x10000; |
| OUTREG(CUR_OFFSET, 0); |
| } |
| #endif /* 0 */ |
| |
| #endif /* CONFIG_PPC_OF */ |
| |
| static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend) |
| { |
| u16 pwr_cmd; |
| u32 tmp; |
| int i; |
| |
| if (!rinfo->pm_reg) |
| return; |
| |
| /* Set the chip into appropriate suspend mode (we use D2, |
| * D3 would require a compete re-initialization of the chip, |
| * including PCI config registers, clocks, AGP conf, ...) |
| */ |
| if (suspend) { |
| printk(KERN_DEBUG "radeonfb (%s): switching to D2 state...\n", |
| pci_name(rinfo->pdev)); |
| |
| /* Disable dynamic power management of clocks for the |
| * duration of the suspend/resume process |
| */ |
| radeon_pm_disable_dynamic_mode(rinfo); |
| |
| /* Save some registers */ |
| radeon_pm_save_regs(rinfo, 0); |
| |
| /* Prepare mobility chips for suspend. |
| */ |
| if (rinfo->is_mobility) { |
| /* Program V2CLK */ |
| radeon_pm_program_v2clk(rinfo); |
| |
| /* Disable IO PADs */ |
| radeon_pm_disable_iopad(rinfo); |
| |
| /* Set low current */ |
| radeon_pm_low_current(rinfo); |
| |
| /* Prepare chip for power management */ |
| radeon_pm_setup_for_suspend(rinfo); |
| |
| if (rinfo->family <= CHIP_FAMILY_RV280) { |
| /* Reset the MDLL */ |
| /* because both INPLL and OUTPLL take the same |
| * lock, that's why. */ |
| tmp = INPLL( pllMDLL_CKO) | MDLL_CKO__MCKOA_RESET |
| | MDLL_CKO__MCKOB_RESET; |
| OUTPLL( pllMDLL_CKO, tmp ); |
| } |
| } |
| |
| for (i = 0; i < 64; ++i) |
| pci_read_config_dword(rinfo->pdev, i * 4, |
| &rinfo->cfg_save[i]); |
| |
| /* Switch PCI power managment to D2. */ |
| pci_disable_device(rinfo->pdev); |
| for (;;) { |
| pci_read_config_word( |
| rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, |
| &pwr_cmd); |
| if (pwr_cmd & 2) |
| break; |
| pci_write_config_word( |
| rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, |
| (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2); |
| mdelay(500); |
| } |
| } else { |
| printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n", |
| pci_name(rinfo->pdev)); |
| |
| /* Switch back PCI powermanagment to D0 */ |
| mdelay(200); |
| pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0); |
| mdelay(500); |
| |
| if (rinfo->family <= CHIP_FAMILY_RV250) { |
| /* Reset the SDRAM controller */ |
| radeon_pm_full_reset_sdram(rinfo); |
| |
| /* Restore some registers */ |
| radeon_pm_restore_regs(rinfo); |
| } else { |
| /* Restore registers first */ |
| radeon_pm_restore_regs(rinfo); |
| /* init sdram controller */ |
| radeon_pm_full_reset_sdram(rinfo); |
| } |
| } |
| } |
| |
| static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo) |
| { |
| int i; |
| static u32 radeon_cfg_after_resume[64]; |
| |
| for (i = 0; i < 64; ++i) |
| pci_read_config_dword(rinfo->pdev, i * 4, |
| &radeon_cfg_after_resume[i]); |
| |
| if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4] |
| == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4]) |
| return 0; /* assume everything is ok */ |
| |
| for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) { |
| if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i]) |
| pci_write_config_dword(rinfo->pdev, i * 4, |
| rinfo->cfg_save[i]); |
| } |
| pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE, |
| rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]); |
| pci_write_config_word(rinfo->pdev, PCI_COMMAND, |
| rinfo->cfg_save[PCI_COMMAND/4]); |
| return 1; |
| } |
| |
| |
| int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) |
| { |
| struct fb_info *info = pci_get_drvdata(pdev); |
| struct radeonfb_info *rinfo = info->par; |
| int i; |
| |
| if (mesg.event == pdev->dev.power.power_state.event) |
| return 0; |
| |
| printk(KERN_DEBUG "radeonfb (%s): suspending for event: %d...\n", |
| pci_name(pdev), mesg.event); |
| |
| /* For suspend-to-disk, we cheat here. We don't suspend anything and |
| * let fbcon continue drawing until we are all set. That shouldn't |
| * really cause any problem at this point, provided that the wakeup |
| * code knows that any state in memory may not match the HW |
| */ |
| switch (mesg.event) { |
| case PM_EVENT_FREEZE: /* about to take snapshot */ |
| case PM_EVENT_PRETHAW: /* before restoring snapshot */ |
| goto done; |
| } |
| |
| acquire_console_sem(); |
| |
| fb_set_suspend(info, 1); |
| |
| if (!(info->flags & FBINFO_HWACCEL_DISABLED)) { |
| /* Make sure engine is reset */ |
| radeon_engine_idle(); |
| radeonfb_engine_reset(rinfo); |
| radeon_engine_idle(); |
| } |
| |
| /* Blank display and LCD */ |
| radeon_screen_blank(rinfo, FB_BLANK_POWERDOWN, 1); |
| |
| /* Sleep */ |
| rinfo->asleep = 1; |
| rinfo->lock_blank = 1; |
| del_timer_sync(&rinfo->lvds_timer); |
| |
| #ifdef CONFIG_PPC_PMAC |
| /* On powermac, we have hooks to properly suspend/resume AGP now, |
| * use them here. We'll ultimately need some generic support here, |
| * but the generic code isn't quite ready for that yet |
| */ |
| pmac_suspend_agp_for_card(pdev); |
| #endif /* CONFIG_PPC_PMAC */ |
| |
| /* If we support wakeup from poweroff, we save all regs we can including cfg |
| * space |
| */ |
| if (rinfo->pm_mode & radeon_pm_off) { |
| /* Always disable dynamic clocks or weird things are happening when |
| * the chip goes off (basically the panel doesn't shut down properly |
| * and we crash on wakeup), |
| * also, we want the saved regs context to have no dynamic clocks in |
| * it, we'll restore the dynamic clocks state on wakeup |
| */ |
| radeon_pm_disable_dynamic_mode(rinfo); |
| mdelay(50); |
| radeon_pm_save_regs(rinfo, 1); |
| |
| if (rinfo->is_mobility && !(rinfo->pm_mode & radeon_pm_d2)) { |
| /* Switch off LVDS interface */ |
| mdelay(1); |
| OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_BL_MOD_EN)); |
| mdelay(1); |
| OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_EN | LVDS_ON)); |
| OUTREG(LVDS_PLL_CNTL, (INREG(LVDS_PLL_CNTL) & ~30000) | 0x20000); |
| mdelay(20); |
| OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON)); |
| } |
| // FIXME: Use PCI layer |
| for (i = 0; i < 64; ++i) |
| pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]); |
| pci_disable_device(pdev); |
| } |
| /* If we support D2, we go to it (should be fixed later with a flag forcing |
| * D3 only for some laptops) |
| */ |
| if (rinfo->pm_mode & radeon_pm_d2) |
| radeon_set_suspend(rinfo, 1); |
| |
| release_console_sem(); |
| |
| done: |
| pdev->dev.power.power_state = mesg; |
| |
| return 0; |
| } |
| |
| int radeonfb_pci_resume(struct pci_dev *pdev) |
| { |
| struct fb_info *info = pci_get_drvdata(pdev); |
| struct radeonfb_info *rinfo = info->par; |
| int rc = 0; |
| |
| if (pdev->dev.power.power_state.event == PM_EVENT_ON) |
| return 0; |
| |
| if (rinfo->no_schedule) { |
| if (try_acquire_console_sem()) |
| return 0; |
| } else |
| acquire_console_sem(); |
| |
| printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n", |
| pci_name(pdev), pdev->dev.power.power_state.event); |
| |
| |
| if (pci_enable_device(pdev)) { |
| rc = -ENODEV; |
| printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n", |
| pci_name(pdev)); |
| goto bail; |
| } |
| pci_set_master(pdev); |
| |
| if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { |
| /* Wakeup chip. Check from config space if we were powered off |
| * (todo: additionally, check CLK_PIN_CNTL too) |
| */ |
| if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) { |
| if (rinfo->reinit_func != NULL) |
| rinfo->reinit_func(rinfo); |
| else { |
| printk(KERN_ERR "radeonfb (%s): can't resume radeon from" |
| " D3 cold, need softboot !", pci_name(pdev)); |
| rc = -EIO; |
| goto bail; |
| } |
| } |
| /* If we support D2, try to resume... we should check what was our |
| * state though... (were we really in D2 state ?). Right now, this code |
| * is only enable on Macs so it's fine. |
| */ |
| else if (rinfo->pm_mode & radeon_pm_d2) |
| radeon_set_suspend(rinfo, 0); |
| |
| rinfo->asleep = 0; |
| } else |
| radeon_engine_idle(); |
| |
| /* Restore display & engine */ |
| radeon_write_mode (rinfo, &rinfo->state, 1); |
| if (!(info->flags & FBINFO_HWACCEL_DISABLED)) |
| radeonfb_engine_init (rinfo); |
| |
| fb_pan_display(info, &info->var); |
| fb_set_cmap(&info->cmap, info); |
| |
| /* Refresh */ |
| fb_set_suspend(info, 0); |
| |
| /* Unblank */ |
| rinfo->lock_blank = 0; |
| radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 1); |
| |
| #ifdef CONFIG_PPC_PMAC |
| /* On powermac, we have hooks to properly suspend/resume AGP now, |
| * use them here. We'll ultimately need some generic support here, |
| * but the generic code isn't quite ready for that yet |
| */ |
| pmac_resume_agp_for_card(pdev); |
| #endif /* CONFIG_PPC_PMAC */ |
| |
| |
| /* Check status of dynclk */ |
| if (rinfo->dynclk == 1) |
| radeon_pm_enable_dynamic_mode(rinfo); |
| else if (rinfo->dynclk == 0) |
| radeon_pm_disable_dynamic_mode(rinfo); |
| |
| pdev->dev.power.power_state = PMSG_ON; |
| |
| bail: |
| release_console_sem(); |
| |
| return rc; |
| } |
| |
| #ifdef CONFIG_PPC_OF |
| static void radeonfb_early_resume(void *data) |
| { |
| struct radeonfb_info *rinfo = data; |
| |
| rinfo->no_schedule = 1; |
| radeonfb_pci_resume(rinfo->pdev); |
| rinfo->no_schedule = 0; |
| } |
| #endif /* CONFIG_PPC_OF */ |
| |
| #endif /* CONFIG_PM */ |
| |
| void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep) |
| { |
| /* Find PM registers in config space if any*/ |
| rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM); |
| |
| /* Enable/Disable dynamic clocks: TODO add sysfs access */ |
| if (rinfo->family == CHIP_FAMILY_RS480) |
| rinfo->dynclk = -1; |
| else |
| rinfo->dynclk = dynclk; |
| |
| if (rinfo->dynclk == 1) { |
| radeon_pm_enable_dynamic_mode(rinfo); |
| printk("radeonfb: Dynamic Clock Power Management enabled\n"); |
| } else if (rinfo->dynclk == 0) { |
| radeon_pm_disable_dynamic_mode(rinfo); |
| printk("radeonfb: Dynamic Clock Power Management disabled\n"); |
| } |
| |
| #if defined(CONFIG_PM) |
| #if defined(CONFIG_PPC_PMAC) |
| /* Check if we can power manage on suspend/resume. We can do |
| * D2 on M6, M7 and M9, and we can resume from D3 cold a few other |
| * "Mac" cards, but that's all. We need more infos about what the |
| * BIOS does tho. Right now, all this PM stuff is pmac-only for that |
| * reason. --BenH |
| */ |
| if (machine_is(powermac) && rinfo->of_node) { |
| if (rinfo->is_mobility && rinfo->pm_reg && |
| rinfo->family <= CHIP_FAMILY_RV250) |
| rinfo->pm_mode |= radeon_pm_d2; |
| |
| /* We can restart Jasper (M10 chip in albooks), BlueStone (7500 chip |
| * in some desktop G4s), Via (M9+ chip on iBook G4) and |
| * Snowy (M11 chip on iBook G4 manufactured after July 2005) |
| */ |
| if (!strcmp(rinfo->of_node->name, "ATY,JasperParent") || |
| !strcmp(rinfo->of_node->name, "ATY,SnowyParent")) { |
| rinfo->reinit_func = radeon_reinitialize_M10; |
| rinfo->pm_mode |= radeon_pm_off; |
| } |
| #if 0 /* Not ready yet */ |
| if (!strcmp(rinfo->of_node->name, "ATY,BlueStoneParent")) { |
| rinfo->reinit_func = radeon_reinitialize_QW; |
| rinfo->pm_mode |= radeon_pm_off; |
| } |
| #endif |
| if (!strcmp(rinfo->of_node->name, "ATY,ViaParent")) { |
| rinfo->reinit_func = radeon_reinitialize_M9P; |
| rinfo->pm_mode |= radeon_pm_off; |
| } |
| |
| /* If any of the above is set, we assume the machine can sleep/resume. |
| * It's a bit of a "shortcut" but will work fine. Ideally, we need infos |
| * from the platform about what happens to the chip... |
| * Now we tell the platform about our capability |
| */ |
| if (rinfo->pm_mode != radeon_pm_none) { |
| pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1); |
| pmac_set_early_video_resume(radeonfb_early_resume, rinfo); |
| } |
| |
| #if 0 |
| /* Power down TV DAC, taht saves a significant amount of power, |
| * we'll have something better once we actually have some TVOut |
| * support |
| */ |
| OUTREG(TV_DAC_CNTL, INREG(TV_DAC_CNTL) | 0x07000000); |
| #endif |
| } |
| #endif /* defined(CONFIG_PPC_PMAC) */ |
| #endif /* defined(CONFIG_PM) */ |
| |
| if (ignore_devlist) |
| printk(KERN_DEBUG |
| "radeonfb: skipping test for device workarounds\n"); |
| else |
| radeon_apply_workarounds(rinfo); |
| |
| if (force_sleep) { |
| printk(KERN_DEBUG |
| "radeonfb: forcefully enabling D2 sleep mode\n"); |
| rinfo->pm_mode |= radeon_pm_d2; |
| } |
| } |
| |
| void radeonfb_pm_exit(struct radeonfb_info *rinfo) |
| { |
| #if defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) |
| if (rinfo->pm_mode != radeon_pm_none) |
| pmac_set_early_video_resume(NULL, NULL); |
| #endif |
| } |