usb: musb: dsps: add dt support
Added device tree support for dsps musb glue driver and updated the
Documentation with device tree binding information.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
[afzal@ti.com: use '-' instead of '_' for dt properties]
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 796fc60..b8aecbb 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -31,6 +31,7 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
@@ -45,6 +46,10 @@
#include "musb_core.h"
+#ifdef CONFIG_OF
+static const struct of_device_id musb_dsps_of_match[];
+#endif
+
/**
* avoid using musb_readx()/musb_writex() as glue layer should not be
* dependent on musb core layer symbols.
@@ -448,6 +453,8 @@
struct device *dev = glue->dev;
struct platform_device *pdev = to_platform_device(dev);
struct musb_hdrc_platform_data *pdata = dev->platform_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct musb_hdrc_config *config;
struct platform_device *musb;
struct resource *res;
struct resource resources[2];
@@ -499,14 +506,40 @@
glue->musb[id] = musb;
- pdata->platform_ops = &dsps_ops;
-
ret = platform_device_add_resources(musb, resources, 2);
if (ret) {
dev_err(dev, "failed to add resources\n");
goto err2;
}
+ if (np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev,
+ "failed to allocate musb platfrom data\n");
+ ret = -ENOMEM;
+ goto err2;
+ }
+
+ config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
+ if (!config) {
+ dev_err(&pdev->dev,
+ "failed to allocate musb hdrc config\n");
+ goto err2;
+ }
+
+ of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
+ of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
+ sprintf(res_name, "port%d-mode", id);
+ of_property_read_u32(np, res_name, (u32 *)&pdata->mode);
+ of_property_read_u32(np, "power", (u32 *)&pdata->power);
+ config->multipoint = of_property_read_bool(np, "multipoint");
+
+ pdata->config = config;
+ }
+
+ pdata->platform_ops = &dsps_ops;
+
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
if (ret) {
dev_err(dev, "failed to add platform_data\n");
@@ -538,13 +571,21 @@
static int __devinit dsps_probe(struct platform_device *pdev)
{
- const struct platform_device_id *id = platform_get_device_id(pdev);
- const struct dsps_musb_wrapper *wrp =
- (struct dsps_musb_wrapper *)id->driver_data;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ const struct dsps_musb_wrapper *wrp;
struct dsps_glue *glue;
struct resource *iomem;
int ret, i;
+ match = of_match_node(musb_dsps_of_match, np);
+ if (!match) {
+ dev_err(&pdev->dev, "fail to get matching of_match struct\n");
+ ret = -EINVAL;
+ goto err0;
+ }
+ wrp = match->data;
+
/* allocate glue */
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
@@ -693,13 +734,14 @@
};
MODULE_DEVICE_TABLE(platform, musb_dsps_id_table);
+#ifdef CONFIG_OF
static const struct of_device_id musb_dsps_of_match[] __devinitconst = {
- { .compatible = "musb-ti81xx", },
- { .compatible = "ti,ti81xx-musb", },
- { .compatible = "ti,am335x-musb", },
+ { .compatible = "ti,musb-am33xx",
+ .data = (void *) &ti81xx_driver_data, },
{ },
};
MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
+#endif
static struct platform_driver dsps_usbss_driver = {
.probe = dsps_probe,
@@ -707,7 +749,7 @@
.driver = {
.name = "musb-dsps",
.pm = &dsps_pm_ops,
- .of_match_table = musb_dsps_of_match,
+ .of_match_table = of_match_ptr(musb_dsps_of_match),
},
.id_table = musb_dsps_id_table,
};