| /* |
| * Copyright (c) 2009 Peter Holik |
| * |
| * Intellon usb PLC (Powerline Communications) usb net driver |
| * |
| * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf |
| * |
| * Based on the work of Jan 'RedBully' Seiffert |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or. |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/ctype.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/usb/usbnet.h> |
| |
| #define INT51X1_VENDOR_ID 0x09e1 |
| #define INT51X1_PRODUCT_ID 0x5121 |
| |
| #define INT51X1_HEADER_SIZE 2 /* 2 byte header */ |
| |
| #define PACKET_TYPE_PROMISCUOUS (1 << 0) |
| #define PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ |
| #define PACKET_TYPE_DIRECTED (1 << 2) |
| #define PACKET_TYPE_BROADCAST (1 << 3) |
| #define PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ |
| |
| #define SET_ETHERNET_PACKET_FILTER 0x43 |
| |
| static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| int len; |
| |
| if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) { |
| deverr(dev, "unexpected tiny rx frame"); |
| return 0; |
| } |
| |
| len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]); |
| |
| skb_trim(skb, len); |
| |
| return 1; |
| } |
| |
| static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev, |
| struct sk_buff *skb, gfp_t flags) |
| { |
| int pack_len = skb->len; |
| int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE; |
| int headroom = skb_headroom(skb); |
| int tailroom = skb_tailroom(skb); |
| int need_tail = 0; |
| __le16 *len; |
| |
| /* if packet and our header is smaler than 64 pad to 64 (+ ZLP) */ |
| if ((pack_with_header_len) < dev->maxpacket) |
| need_tail = dev->maxpacket - pack_with_header_len + 1; |
| /* |
| * usbnet would send a ZLP if packetlength mod urbsize == 0 for us, |
| * but we need to know ourself, because this would add to the length |
| * we send down to the device... |
| */ |
| else if (!(pack_with_header_len % dev->maxpacket)) |
| need_tail = 1; |
| |
| if (!skb_cloned(skb) && |
| (headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) { |
| if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) { |
| skb->data = memmove(skb->head + INT51X1_HEADER_SIZE, |
| skb->data, skb->len); |
| skb_set_tail_pointer(skb, skb->len); |
| } |
| } else { |
| struct sk_buff *skb2; |
| |
| skb2 = skb_copy_expand(skb, |
| INT51X1_HEADER_SIZE, |
| need_tail, |
| flags); |
| dev_kfree_skb_any(skb); |
| if (!skb2) |
| return NULL; |
| skb = skb2; |
| } |
| |
| pack_len += need_tail; |
| pack_len &= 0x07ff; |
| |
| len = (__le16 *) __skb_push(skb, INT51X1_HEADER_SIZE); |
| *len = cpu_to_le16(pack_len); |
| |
| if(need_tail) |
| memset(__skb_put(skb, need_tail), 0, need_tail); |
| |
| return skb; |
| } |
| |
| static void int51x1_async_cmd_callback(struct urb *urb) |
| { |
| struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; |
| int status = urb->status; |
| |
| if (status < 0) |
| dev_warn(&urb->dev->dev, "async callback failed with %d\n", status); |
| |
| kfree(req); |
| usb_free_urb(urb); |
| } |
| |
| static void int51x1_set_multicast(struct net_device *netdev) |
| { |
| struct usb_ctrlrequest *req; |
| int status; |
| struct urb *urb; |
| struct usbnet *dev = netdev_priv(netdev); |
| u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST; |
| |
| if (netdev->flags & IFF_PROMISC) { |
| /* do not expect to see traffic of other PLCs */ |
| filter |= PACKET_TYPE_PROMISCUOUS; |
| devinfo(dev, "promiscuous mode enabled"); |
| } else if (netdev->mc_count || |
| (netdev->flags & IFF_ALLMULTI)) { |
| filter |= PACKET_TYPE_ALL_MULTICAST; |
| devdbg(dev, "receive all multicast enabled"); |
| } else { |
| /* ~PROMISCUOUS, ~MULTICAST */ |
| devdbg(dev, "receive own packets only"); |
| } |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) { |
| devwarn(dev, "Error allocating URB"); |
| return; |
| } |
| |
| req = kmalloc(sizeof(*req), GFP_ATOMIC); |
| if (!req) { |
| devwarn(dev, "Error allocating control msg"); |
| goto out; |
| } |
| |
| req->bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; |
| req->bRequest = SET_ETHERNET_PACKET_FILTER; |
| req->wValue = cpu_to_le16(filter); |
| req->wIndex = 0; |
| req->wLength = 0; |
| |
| usb_fill_control_urb(urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), |
| (void *)req, NULL, 0, |
| int51x1_async_cmd_callback, |
| (void *)req); |
| |
| status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (status < 0) { |
| devwarn(dev, "Error submitting control msg, sts=%d", status); |
| goto out1; |
| } |
| return; |
| out1: |
| kfree(req); |
| out: |
| usb_free_urb(urb); |
| } |
| |
| static const struct net_device_ops int51x1_netdev_ops = { |
| .ndo_open = usbnet_open, |
| .ndo_stop = usbnet_stop, |
| .ndo_start_xmit = usbnet_start_xmit, |
| .ndo_tx_timeout = usbnet_tx_timeout, |
| .ndo_change_mtu = usbnet_change_mtu, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_multicast_list = int51x1_set_multicast, |
| }; |
| |
| static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| int status = usbnet_get_ethernet_addr(dev, 3); |
| |
| if (status) |
| return status; |
| |
| dev->net->hard_header_len += INT51X1_HEADER_SIZE; |
| dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; |
| dev->net->netdev_ops = &int51x1_netdev_ops; |
| |
| return usbnet_get_endpoints(dev, intf); |
| } |
| |
| static const struct driver_info int51x1_info = { |
| .description = "Intellon usb powerline adapter", |
| .bind = int51x1_bind, |
| .rx_fixup = int51x1_rx_fixup, |
| .tx_fixup = int51x1_tx_fixup, |
| .in = 1, |
| .out = 2, |
| .flags = FLAG_ETHER, |
| }; |
| |
| static const struct usb_device_id products[] = { |
| { |
| USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID), |
| .driver_info = (unsigned long) &int51x1_info, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver int51x1_driver = { |
| .name = "int51x1", |
| .id_table = products, |
| .probe = usbnet_probe, |
| .disconnect = usbnet_disconnect, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| }; |
| |
| static int __init int51x1_init(void) |
| { |
| return usb_register(&int51x1_driver); |
| } |
| module_init(int51x1_init); |
| |
| static void __exit int51x1_exit(void) |
| { |
| usb_deregister(&int51x1_driver); |
| } |
| module_exit(int51x1_exit); |
| |
| MODULE_AUTHOR("Peter Holik"); |
| MODULE_DESCRIPTION("Intellon usb powerline adapter"); |
| MODULE_LICENSE("GPL"); |