iwlwifi: clean up module parameters
For now at least, all module parameters should be
with the core functionality, so move them there,
while at it rename to iwlwifi_mod_params. Also
rename iwl-shared.h to iwl-modparams.h to reflect
the real contents.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index ed37174..e1c2bb8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -37,6 +37,7 @@
#include "iwl-agn-hw.h"
#include "iwl-agn.h"
#include "iwl-trans.h"
+#include "iwl-modparams.h"
int iwlagn_hw_valid_rtc_data_addr(u32 addr)
{
@@ -92,17 +93,6 @@
iwl_tt_handler(priv);
}
-struct iwl_mod_params iwlagn_mod_params = {
- .amsdu_size_8K = 1,
- .restart_fw = 1,
- .plcp_check = true,
- .bt_coex_active = true,
- .power_level = IWL_POWER_INDEX_1,
- .bt_ch_announce = true,
- .auto_agg = true,
- /* the rest are 0 by default */
-};
-
int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
{
int idx = 0;
@@ -343,7 +333,7 @@
* (might be in monitor mode), or the interface is in
* IBSS mode (no proper uCode support for coex then).
*/
- if (!iwlagn_mod_params.bt_coex_active ||
+ if (!iwlwifi_mod_params.bt_coex_active ||
priv->iw_mode == NL80211_IFTYPE_ADHOC) {
basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED;
} else {
@@ -1152,7 +1142,7 @@
if (ret)
goto out;
- if (!iwlagn_mod_params.sw_crypto) {
+ if (!iwlwifi_mod_params.sw_crypto) {
/* mark all keys clear */
priv->ucode_key_table = 0;
ctx->key_mapping_keys = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 14afd01..51e1a69 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -38,6 +38,7 @@
#include "iwl-dev.h"
#include "iwl-agn.h"
#include "iwl-op-mode.h"
+#include "iwl-modparams.h"
#define RS_NAME "iwl-agn-rs"
@@ -419,7 +420,7 @@
load = rs_tl_get_load(lq_data, tid);
- if ((iwlagn_mod_params.auto_agg) || (load > IWL_AGG_LOAD_THRESHOLD)) {
+ if ((iwlwifi_mod_params.auto_agg) || (load > IWL_AGG_LOAD_THRESHOLD)) {
IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
sta->addr, tid);
ret = ieee80211_start_tx_ba_session(sta, tid, 5000);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c
index 6b2007a..f941223 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c
@@ -37,6 +37,7 @@
#include "iwl-io.h"
#include "iwl-agn-calib.h"
#include "iwl-agn.h"
+#include "iwl-modparams.h"
#define IWL_CMD_ENTRY(x) [x] = #x
@@ -337,7 +338,7 @@
if (msecs < 99)
return;
- if (iwlagn_mod_params.plcp_check &&
+ if (iwlwifi_mod_params.plcp_check &&
!iwlagn_good_plcp_health(priv, cur_ofdm, cur_ofdm_ht, msecs))
iwl_force_rf_reset(priv, false);
}
@@ -747,7 +748,7 @@
}
/* In case of HW accelerated crypto and bad decryption, drop */
- if (!iwlagn_mod_params.sw_crypto &&
+ if (!iwlwifi_mod_params.sw_crypto &&
iwlagn_set_decrypted_flag(priv, hdr, ampdu_status, stats))
return;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index 6e9dce7..0f7c444 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -29,6 +29,7 @@
#include "iwl-agn.h"
#include "iwl-agn-calib.h"
#include "iwl-trans.h"
+#include "iwl-modparams.h"
/*
* initialize rxon structure with default values from eeprom
@@ -1129,7 +1130,7 @@
return 0;
}
- iwl_set_rxon_hwcrypto(priv, ctx, !iwlagn_mod_params.sw_crypto);
+ iwl_set_rxon_hwcrypto(priv, ctx, !iwlwifi_mod_params.sw_crypto);
IWL_DEBUG_INFO(priv,
"Going to commit RXON\n"
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tt.c b/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
index cd331da..a5cfe0a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
@@ -41,6 +41,7 @@
#include "iwl-commands.h"
#include "iwl-debug.h"
#include "iwl-agn-tt.h"
+#include "iwl-modparams.h"
/* default Thermal Throttling transaction table
* Current state | Throttling Down | Throttling Up
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 0aba378..e219868 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -52,6 +52,7 @@
#include "iwl-trans.h"
#include "iwl-op-mode.h"
#include "iwl-drv.h"
+#include "iwl-modparams.h"
/******************************************************************************
*
@@ -752,7 +753,7 @@
.kill_cts_mask = 0,
};
- if (!iwlagn_mod_params.bt_coex_active)
+ if (!iwlwifi_mod_params.bt_coex_active)
bt_cmd.flags = BT_COEX_DISABLE;
else
bt_cmd.flags = BT_COEX_ENABLE;
@@ -1190,7 +1191,7 @@
max_bit_rate = MAX_BIT_RATE_40_MHZ;
}
- if (iwlagn_mod_params.amsdu_size_8K)
+ if (iwlwifi_mod_params.amsdu_size_8K)
ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
@@ -1428,7 +1429,7 @@
priv->hw_params.use_rts_for_aggregation =
priv->cfg->ht_params->use_rts_for_aggregation;
- if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
+ if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
priv->hw_params.sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
/* Device-specific setup */
@@ -1554,8 +1555,8 @@
trans_cfg.op_mode = op_mode;
trans_cfg.no_reclaim_cmds = no_reclaim_cmds;
trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds);
- trans_cfg.rx_buf_size_8k = iwlagn_mod_params.amsdu_size_8K;
- if (!iwlagn_mod_params.wd_disable)
+ trans_cfg.rx_buf_size_8k = iwlwifi_mod_params.amsdu_size_8K;
+ if (!iwlwifi_mod_params.wd_disable)
trans_cfg.queue_watchdog_timeout =
priv->cfg->base_params->wd_timeout;
else
@@ -1600,12 +1601,12 @@
/* is antenna coupling more than 35dB ? */
priv->bt_ant_couple_ok =
- (iwlagn_mod_params.ant_coupling >
+ (iwlwifi_mod_params.ant_coupling >
IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
true : false;
/* enable/disable bt channel inhibition */
- priv->bt_ch_announce = iwlagn_mod_params.bt_ch_announce;
+ priv->bt_ch_announce = iwlwifi_mod_params.bt_ch_announce;
IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
(priv->bt_ch_announce) ? "On" : "Off");
@@ -2204,7 +2205,7 @@
}
if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
- if (iwlagn_mod_params.restart_fw) {
+ if (iwlwifi_mod_params.restart_fw) {
IWL_DEBUG_FW_ERRORS(priv,
"Restarting adapter due to uCode error.\n");
queue_work(priv->workqueue, &priv->restart);
@@ -2394,77 +2395,3 @@
module_exit(iwl_exit);
module_init(iwl_init);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug, iwlagn_mod_params.debug_level, uint,
- S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "debug output mask");
-#endif
-
-module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
-MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
-module_param_named(11n_disable, iwlagn_mod_params.disable_11n, uint, S_IRUGO);
-MODULE_PARM_DESC(11n_disable,
- "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
-module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
- int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
-module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
-
-module_param_named(antenna_coupling, iwlagn_mod_params.ant_coupling,
- int, S_IRUGO);
-MODULE_PARM_DESC(antenna_coupling,
- "specify antenna coupling in dB (defualt: 0 dB)");
-
-module_param_named(bt_ch_inhibition, iwlagn_mod_params.bt_ch_announce,
- bool, S_IRUGO);
-MODULE_PARM_DESC(bt_ch_inhibition,
- "Enable BT channel inhibition (default: enable)");
-
-module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
-MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
-
-module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO);
-MODULE_PARM_DESC(wd_disable,
- "Disable stuck queue watchdog timer 0=system default, "
- "1=disable, 2=enable (default: 0)");
-
-/*
- * set bt_coex_active to true, uCode will do kill/defer
- * every time the priority line is asserted (BT is sending signals on the
- * priority line in the PCIx).
- * set bt_coex_active to false, uCode will ignore the BT activity and
- * perform the normal operation
- *
- * User might experience transmit issue on some platform due to WiFi/BT
- * co-exist problem. The possible behaviors are:
- * Able to scan and finding all the available AP
- * Not able to associate with any AP
- * On those platforms, WiFi communication can be restored by set
- * "bt_coex_active" module parameter to "false"
- *
- * default: bt_coex_active = true (BT_COEX_ENABLE)
- */
-module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active,
- bool, S_IRUGO);
-MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)");
-
-module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO);
-MODULE_PARM_DESC(led_mode, "0=system default, "
- "1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)");
-
-module_param_named(power_save, iwlagn_mod_params.power_save,
- bool, S_IRUGO);
-MODULE_PARM_DESC(power_save,
- "enable WiFi power management (default: disable)");
-
-module_param_named(power_level, iwlagn_mod_params.power_level,
- int, S_IRUGO);
-MODULE_PARM_DESC(power_level,
- "default power save level (range from 1 - 5, default: 1)");
-
-module_param_named(auto_agg, iwlagn_mod_params.auto_agg,
- bool, S_IRUGO);
-MODULE_PARM_DESC(auto_agg,
- "enable agg w/o check traffic load (default: enable)");
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 2dcbeba..8376b84 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -29,12 +29,12 @@
#ifndef __iwl_debug_h__
#define __iwl_debug_h__
-#include "iwl-shared.h"
+#include "iwl-modparams.h"
static inline bool iwl_have_debug_level(u32 level)
{
- return iwlagn_mod_params.debug_level & level;
+ return iwlwifi_mod_params.debug_level & level;
}
void __iwl_err(struct device *dev, bool rfkill_prefix, bool only_trace,
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index f612ce8..e7c157e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -39,6 +39,7 @@
#include "iwl-debug.h"
#include "iwl-io.h"
#include "iwl-agn.h"
+#include "iwl-modparams.h"
/* create and remove of files */
#define DEBUGFS_ADD_FILE(name, parent, mode) do { \
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 7994be3..b064676 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -48,7 +48,6 @@
#include "iwl-agn-rs.h"
#include "iwl-agn-tt.h"
#include "iwl-trans.h"
-#include "iwl-shared.h"
#include "iwl-op-mode.h"
#include "iwl-notif-wait.h"
diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index 28d81a7..05302d6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -71,6 +71,7 @@
#include "iwl-agn-hw.h"
#include "iwl-fw.h"
#include "iwl-config.h"
+#include "iwl-modparams.h"
/* private includes */
#include "iwl-fw-file.h"
@@ -924,3 +925,90 @@
kfree(drv);
}
+
+
+/* shared module parameters */
+struct iwl_mod_params iwlwifi_mod_params = {
+ .amsdu_size_8K = 1,
+ .restart_fw = 1,
+ .plcp_check = true,
+ .bt_coex_active = true,
+ .power_level = IWL_POWER_INDEX_1,
+ .bt_ch_announce = true,
+ .auto_agg = true,
+ /* the rest are 0 by default */
+};
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+module_param_named(debug, iwlwifi_mod_params.debug_level, uint,
+ S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "debug output mask");
+#endif
+
+module_param_named(swcrypto, iwlwifi_mod_params.sw_crypto, int, S_IRUGO);
+MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
+module_param_named(11n_disable, iwlwifi_mod_params.disable_11n, uint, S_IRUGO);
+MODULE_PARM_DESC(11n_disable,
+ "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
+module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K,
+ int, S_IRUGO);
+MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
+module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, int, S_IRUGO);
+MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
+
+module_param_named(antenna_coupling, iwlwifi_mod_params.ant_coupling,
+ int, S_IRUGO);
+MODULE_PARM_DESC(antenna_coupling,
+ "specify antenna coupling in dB (defualt: 0 dB)");
+
+module_param_named(bt_ch_inhibition, iwlwifi_mod_params.bt_ch_announce,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(bt_ch_inhibition,
+ "Enable BT channel inhibition (default: enable)");
+
+module_param_named(plcp_check, iwlwifi_mod_params.plcp_check, bool, S_IRUGO);
+MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
+
+module_param_named(wd_disable, iwlwifi_mod_params.wd_disable, int, S_IRUGO);
+MODULE_PARM_DESC(wd_disable,
+ "Disable stuck queue watchdog timer 0=system default, "
+ "1=disable, 2=enable (default: 0)");
+
+/*
+ * set bt_coex_active to true, uCode will do kill/defer
+ * every time the priority line is asserted (BT is sending signals on the
+ * priority line in the PCIx).
+ * set bt_coex_active to false, uCode will ignore the BT activity and
+ * perform the normal operation
+ *
+ * User might experience transmit issue on some platform due to WiFi/BT
+ * co-exist problem. The possible behaviors are:
+ * Able to scan and finding all the available AP
+ * Not able to associate with any AP
+ * On those platforms, WiFi communication can be restored by set
+ * "bt_coex_active" module parameter to "false"
+ *
+ * default: bt_coex_active = true (BT_COEX_ENABLE)
+ */
+module_param_named(bt_coex_active, iwlwifi_mod_params.bt_coex_active,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)");
+
+module_param_named(led_mode, iwlwifi_mod_params.led_mode, int, S_IRUGO);
+MODULE_PARM_DESC(led_mode, "0=system default, "
+ "1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)");
+
+module_param_named(power_save, iwlwifi_mod_params.power_save,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(power_save,
+ "enable WiFi power management (default: disable)");
+
+module_param_named(power_level, iwlwifi_mod_params.power_level,
+ int, S_IRUGO);
+MODULE_PARM_DESC(power_level,
+ "default power save level (range from 1 - 5, default: 1)");
+
+module_param_named(auto_agg, iwlwifi_mod_params.auto_agg,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(auto_agg,
+ "enable agg w/o check traffic load (default: enable)");
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 1d62d06..4700041 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -39,6 +39,7 @@
#include "iwl-agn.h"
#include "iwl-io.h"
#include "iwl-trans.h"
+#include "iwl-modparams.h"
/* Throughput OFF time(ms) ON time (ms)
* >300 25 25
@@ -173,7 +174,7 @@
void iwl_leds_init(struct iwl_priv *priv)
{
- int mode = iwlagn_mod_params.led_mode;
+ int mode = iwlwifi_mod_params.led_mode;
int ret;
if (mode == IWL_LED_DISABLE) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
index 4f45156..9670554 100644
--- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c
+++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
@@ -49,6 +49,7 @@
#include "iwl-agn.h"
#include "iwl-trans.h"
#include "iwl-op-mode.h"
+#include "iwl-modparams.h"
/*****************************************************************************
*
@@ -202,7 +203,7 @@
WIPHY_WOWLAN_DISCONNECT |
WIPHY_WOWLAN_EAP_IDENTITY_REQ |
WIPHY_WOWLAN_RFKILL_RELEASE;
- if (!iwlagn_mod_params.sw_crypto)
+ if (!iwlwifi_mod_params.sw_crypto)
hw->wiphy->wowlan.flags |=
WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
WIPHY_WOWLAN_GTK_REKEY_FAILURE;
@@ -214,7 +215,7 @@
IWLAGN_WOWLAN_MAX_PATTERN_LEN;
}
- if (iwlagn_mod_params.power_save)
+ if (iwlwifi_mod_params.power_save)
hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
else
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
@@ -365,7 +366,7 @@
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
- if (iwlagn_mod_params.sw_crypto)
+ if (iwlwifi_mod_params.sw_crypto)
return;
IWL_DEBUG_MAC80211(priv, "enter\n");
@@ -531,7 +532,7 @@
IWL_DEBUG_MAC80211(priv, "enter\n");
- if (iwlagn_mod_params.sw_crypto) {
+ if (iwlwifi_mod_params.sw_crypto) {
IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
return -EOPNOTSUPP;
}
@@ -642,7 +643,7 @@
switch (action) {
case IEEE80211_AMPDU_RX_START:
- if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG)
+ if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG)
break;
IWL_DEBUG_HT(priv, "start Rx\n");
ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn);
@@ -654,7 +655,7 @@
case IEEE80211_AMPDU_TX_START:
if (!priv->trans->ops->tx_agg_setup)
break;
- if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG)
+ if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG)
break;
IWL_DEBUG_HT(priv, "start Tx\n");
ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn);
diff --git a/drivers/net/wireless/iwlwifi/iwl-shared.h b/drivers/net/wireless/iwlwifi/iwl-modparams.h
similarity index 95%
rename from drivers/net/wireless/iwlwifi/iwl-shared.h
rename to drivers/net/wireless/iwlwifi/iwl-modparams.h
index 3f21dd2..558b2e6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-shared.h
+++ b/drivers/net/wireless/iwlwifi/iwl-modparams.h
@@ -68,7 +68,16 @@
#include <linux/gfp.h>
#include <net/mac80211.h>
-extern struct iwl_mod_params iwlagn_mod_params;
+extern struct iwl_mod_params iwlwifi_mod_params;
+
+enum iwl_power_level {
+ IWL_POWER_INDEX_1,
+ IWL_POWER_INDEX_2,
+ IWL_POWER_INDEX_3,
+ IWL_POWER_INDEX_4,
+ IWL_POWER_INDEX_5,
+ IWL_POWER_NUM
+};
#define IWL_DISABLE_HT_ALL BIT(0)
#define IWL_DISABLE_HT_TXAGG BIT(1)
diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c
index e80e9aa..0c8a1c2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-pci.c
+++ b/drivers/net/wireless/iwlwifi/iwl-pci.c
@@ -72,7 +72,6 @@
#include "iwl-drv.h"
#include "iwl-trans.h"
#include "iwl-trans-pcie-int.h"
-#include "iwl-shared.h"
#define IWL_PCI_DEVICE(dev, subdev, cfg) \
.vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 5fba34b..8352265 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -42,6 +42,7 @@
#include "iwl-debug.h"
#include "iwl-power.h"
#include "iwl-trans.h"
+#include "iwl-modparams.h"
/*
* Setting power level allows the card to go to sleep when not busy.
@@ -307,10 +308,10 @@
priv->power_data.debug_sleep_level_override,
dtimper);
else {
- if (iwlagn_mod_params.power_level > IWL_POWER_INDEX_1 &&
- iwlagn_mod_params.power_level <= IWL_POWER_INDEX_5)
+ if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 &&
+ iwlwifi_mod_params.power_level <= IWL_POWER_INDEX_5)
iwl_static_sleep_cmd(priv, cmd,
- iwlagn_mod_params.power_level, dtimper);
+ iwlwifi_mod_params.power_level, dtimper);
else
iwl_static_sleep_cmd(priv, cmd,
IWL_POWER_INDEX_1, dtimper);
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index 07a19fc..21afc92 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -30,15 +30,6 @@
#include "iwl-commands.h"
-enum iwl_power_level {
- IWL_POWER_INDEX_1,
- IWL_POWER_INDEX_2,
- IWL_POWER_INDEX_3,
- IWL_POWER_INDEX_4,
- IWL_POWER_INDEX_5,
- IWL_POWER_NUM
-};
-
struct iwl_power_mgr {
struct iwl_powertable_cmd sleep_cmd;
struct iwl_powertable_cmd sleep_cmd_next;
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index 3eab7d5..63557bb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -70,7 +70,6 @@
#include "iwl-drv.h"
#include "iwl-trans.h"
-#include "iwl-shared.h"
#include "iwl-trans-pcie-int.h"
#include "iwl-csr.h"
#include "iwl-prph.h"