| /* |
| * SPEAr6xx machines clock framework source file |
| * |
| * Copyright (C) 2012 ST Microelectronics |
| * Viresh Kumar <viresh.linux@gmail.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/io.h> |
| #include <linux/spinlock_types.h> |
| #include "clk.h" |
| |
| static DEFINE_SPINLOCK(_lock); |
| |
| #define PLL1_CTR (misc_base + 0x008) |
| #define PLL1_FRQ (misc_base + 0x00C) |
| #define PLL2_CTR (misc_base + 0x014) |
| #define PLL2_FRQ (misc_base + 0x018) |
| #define PLL_CLK_CFG (misc_base + 0x020) |
| /* PLL_CLK_CFG register masks */ |
| #define MCTR_CLK_SHIFT 28 |
| #define MCTR_CLK_MASK 3 |
| |
| #define CORE_CLK_CFG (misc_base + 0x024) |
| /* CORE CLK CFG register masks */ |
| #define HCLK_RATIO_SHIFT 10 |
| #define HCLK_RATIO_MASK 2 |
| #define PCLK_RATIO_SHIFT 8 |
| #define PCLK_RATIO_MASK 2 |
| |
| #define PERIP_CLK_CFG (misc_base + 0x028) |
| /* PERIP_CLK_CFG register masks */ |
| #define CLCD_CLK_SHIFT 2 |
| #define CLCD_CLK_MASK 2 |
| #define UART_CLK_SHIFT 4 |
| #define UART_CLK_MASK 1 |
| #define FIRDA_CLK_SHIFT 5 |
| #define FIRDA_CLK_MASK 2 |
| #define GPT0_CLK_SHIFT 8 |
| #define GPT1_CLK_SHIFT 10 |
| #define GPT2_CLK_SHIFT 11 |
| #define GPT3_CLK_SHIFT 12 |
| #define GPT_CLK_MASK 1 |
| |
| #define PERIP1_CLK_ENB (misc_base + 0x02C) |
| /* PERIP1_CLK_ENB register masks */ |
| #define UART0_CLK_ENB 3 |
| #define UART1_CLK_ENB 4 |
| #define SSP0_CLK_ENB 5 |
| #define SSP1_CLK_ENB 6 |
| #define I2C_CLK_ENB 7 |
| #define JPEG_CLK_ENB 8 |
| #define FSMC_CLK_ENB 9 |
| #define FIRDA_CLK_ENB 10 |
| #define GPT2_CLK_ENB 11 |
| #define GPT3_CLK_ENB 12 |
| #define GPIO2_CLK_ENB 13 |
| #define SSP2_CLK_ENB 14 |
| #define ADC_CLK_ENB 15 |
| #define GPT1_CLK_ENB 11 |
| #define RTC_CLK_ENB 17 |
| #define GPIO1_CLK_ENB 18 |
| #define DMA_CLK_ENB 19 |
| #define SMI_CLK_ENB 21 |
| #define CLCD_CLK_ENB 22 |
| #define GMAC_CLK_ENB 23 |
| #define USBD_CLK_ENB 24 |
| #define USBH0_CLK_ENB 25 |
| #define USBH1_CLK_ENB 26 |
| |
| #define PRSC0_CLK_CFG (misc_base + 0x044) |
| #define PRSC1_CLK_CFG (misc_base + 0x048) |
| #define PRSC2_CLK_CFG (misc_base + 0x04C) |
| |
| #define CLCD_CLK_SYNT (misc_base + 0x05C) |
| #define FIRDA_CLK_SYNT (misc_base + 0x060) |
| #define UART_CLK_SYNT (misc_base + 0x064) |
| |
| /* vco rate configuration table, in ascending order of rates */ |
| static struct pll_rate_tbl pll_rtbl[] = { |
| {.mode = 0, .m = 0x53, .n = 0x0F, .p = 0x1}, /* vco 332 & pll 166 MHz */ |
| {.mode = 0, .m = 0x85, .n = 0x0F, .p = 0x1}, /* vco 532 & pll 266 MHz */ |
| {.mode = 0, .m = 0xA6, .n = 0x0F, .p = 0x1}, /* vco 664 & pll 332 MHz */ |
| }; |
| |
| /* aux rate configuration table, in ascending order of rates */ |
| static struct aux_rate_tbl aux_rtbl[] = { |
| /* For PLL1 = 332 MHz */ |
| {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */ |
| {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */ |
| {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */ |
| {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ |
| }; |
| |
| static const char *clcd_parents[] = { "pll3_clk", "clcd_syn_gclk", }; |
| static const char *firda_parents[] = { "pll3_clk", "firda_syn_gclk", }; |
| static const char *uart_parents[] = { "pll3_clk", "uart_syn_gclk", }; |
| static const char *gpt0_1_parents[] = { "pll3_clk", "gpt0_1_syn_clk", }; |
| static const char *gpt2_parents[] = { "pll3_clk", "gpt2_syn_clk", }; |
| static const char *gpt3_parents[] = { "pll3_clk", "gpt3_syn_clk", }; |
| static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none", |
| "pll2_clk", }; |
| |
| /* gpt rate configuration table, in ascending order of rates */ |
| static struct gpt_rate_tbl gpt_rtbl[] = { |
| /* For pll1 = 332 MHz */ |
| {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ |
| {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ |
| {.mscale = 1, .nscale = 0}, /* 83 MHz */ |
| }; |
| |
| void __init spear6xx_clk_init(void __iomem *misc_base) |
| { |
| struct clk *clk, *clk1; |
| |
| clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, |
| 32000); |
| clk_register_clkdev(clk, "osc_32k_clk", NULL); |
| |
| clk = clk_register_fixed_rate(NULL, "osc_30m_clk", NULL, CLK_IS_ROOT, |
| 30000000); |
| clk_register_clkdev(clk, "osc_30m_clk", NULL); |
| |
| /* clock derived from 32 KHz osc clk */ |
| clk = clk_register_gate(NULL, "rtc_spear", "osc_32k_clk", 0, |
| PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "rtc-spear"); |
| |
| /* clock derived from 30 MHz osc clk */ |
| clk = clk_register_fixed_rate(NULL, "pll3_clk", "osc_24m_clk", 0, |
| 48000000); |
| clk_register_clkdev(clk, "pll3_clk", NULL); |
| |
| clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk", |
| 0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), |
| &_lock, &clk1, NULL); |
| clk_register_clkdev(clk, "vco1_clk", NULL); |
| clk_register_clkdev(clk1, "pll1_clk", NULL); |
| |
| clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "osc_30m_clk", |
| 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), |
| &_lock, &clk1, NULL); |
| clk_register_clkdev(clk, "vco2_clk", NULL); |
| clk_register_clkdev(clk1, "pll2_clk", NULL); |
| |
| clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_30m_clk", 0, 1, |
| 1); |
| clk_register_clkdev(clk, NULL, "wdt"); |
| |
| /* clock derived from pll1 clk */ |
| clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", |
| CLK_SET_RATE_PARENT, 1, 1); |
| clk_register_clkdev(clk, "cpu_clk", NULL); |
| |
| clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk", |
| CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT, |
| HCLK_RATIO_MASK, 0, &_lock); |
| clk_register_clkdev(clk, "ahb_clk", NULL); |
| |
| clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "pll1_clk", 0, |
| UART_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), |
| &_lock, &clk1); |
| clk_register_clkdev(clk, "uart_syn_clk", NULL); |
| clk_register_clkdev(clk1, "uart_syn_gclk", NULL); |
| |
| clk = clk_register_mux(NULL, "uart_mclk", uart_parents, |
| ARRAY_SIZE(uart_parents), CLK_SET_RATE_NO_REPARENT, |
| PERIP_CLK_CFG, UART_CLK_SHIFT, UART_CLK_MASK, 0, |
| &_lock); |
| clk_register_clkdev(clk, "uart_mclk", NULL); |
| |
| clk = clk_register_gate(NULL, "uart0", "uart_mclk", 0, PERIP1_CLK_ENB, |
| UART0_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "d0000000.serial"); |
| |
| clk = clk_register_gate(NULL, "uart1", "uart_mclk", 0, PERIP1_CLK_ENB, |
| UART1_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "d0080000.serial"); |
| |
| clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk", |
| 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), |
| &_lock, &clk1); |
| clk_register_clkdev(clk, "firda_syn_clk", NULL); |
| clk_register_clkdev(clk1, "firda_syn_gclk", NULL); |
| |
| clk = clk_register_mux(NULL, "firda_mclk", firda_parents, |
| ARRAY_SIZE(firda_parents), CLK_SET_RATE_NO_REPARENT, |
| PERIP_CLK_CFG, FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, |
| &_lock); |
| clk_register_clkdev(clk, "firda_mclk", NULL); |
| |
| clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0, |
| PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "firda"); |
| |
| clk = clk_register_aux("clcd_syn_clk", "clcd_syn_gclk", "pll1_clk", |
| 0, CLCD_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl), |
| &_lock, &clk1); |
| clk_register_clkdev(clk, "clcd_syn_clk", NULL); |
| clk_register_clkdev(clk1, "clcd_syn_gclk", NULL); |
| |
| clk = clk_register_mux(NULL, "clcd_mclk", clcd_parents, |
| ARRAY_SIZE(clcd_parents), CLK_SET_RATE_NO_REPARENT, |
| PERIP_CLK_CFG, CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, |
| &_lock); |
| clk_register_clkdev(clk, "clcd_mclk", NULL); |
| |
| clk = clk_register_gate(NULL, "clcd_clk", "clcd_mclk", 0, |
| PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "clcd"); |
| |
| /* gpt clocks */ |
| clk = clk_register_gpt("gpt0_1_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, |
| gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); |
| clk_register_clkdev(clk, "gpt0_1_syn_clk", NULL); |
| |
| clk = clk_register_mux(NULL, "gpt0_mclk", gpt0_1_parents, |
| ARRAY_SIZE(gpt0_1_parents), CLK_SET_RATE_NO_REPARENT, |
| PERIP_CLK_CFG, GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "gpt0"); |
| |
| clk = clk_register_mux(NULL, "gpt1_mclk", gpt0_1_parents, |
| ARRAY_SIZE(gpt0_1_parents), CLK_SET_RATE_NO_REPARENT, |
| PERIP_CLK_CFG, GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); |
| clk_register_clkdev(clk, "gpt1_mclk", NULL); |
| |
| clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0, |
| PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "gpt1"); |
| |
| clk = clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG, |
| gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); |
| clk_register_clkdev(clk, "gpt2_syn_clk", NULL); |
| |
| clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents, |
| ARRAY_SIZE(gpt2_parents), CLK_SET_RATE_NO_REPARENT, |
| PERIP_CLK_CFG, GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); |
| clk_register_clkdev(clk, "gpt2_mclk", NULL); |
| |
| clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0, |
| PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "gpt2"); |
| |
| clk = clk_register_gpt("gpt3_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG, |
| gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); |
| clk_register_clkdev(clk, "gpt3_syn_clk", NULL); |
| |
| clk = clk_register_mux(NULL, "gpt3_mclk", gpt3_parents, |
| ARRAY_SIZE(gpt3_parents), CLK_SET_RATE_NO_REPARENT, |
| PERIP_CLK_CFG, GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); |
| clk_register_clkdev(clk, "gpt3_mclk", NULL); |
| |
| clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0, |
| PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "gpt3"); |
| |
| /* clock derived from pll3 clk */ |
| clk = clk_register_gate(NULL, "usbh0_clk", "pll3_clk", 0, |
| PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "e1800000.ehci"); |
| clk_register_clkdev(clk, NULL, "e1900000.ohci"); |
| |
| clk = clk_register_gate(NULL, "usbh1_clk", "pll3_clk", 0, |
| PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "e2000000.ehci"); |
| clk_register_clkdev(clk, NULL, "e2100000.ohci"); |
| |
| clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB, |
| USBD_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "designware_udc"); |
| |
| /* clock derived from ahb clk */ |
| clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2, |
| 1); |
| clk_register_clkdev(clk, "ahbmult2_clk", NULL); |
| |
| clk = clk_register_mux(NULL, "ddr_clk", ddr_parents, |
| ARRAY_SIZE(ddr_parents), CLK_SET_RATE_NO_REPARENT, |
| PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0, &_lock); |
| clk_register_clkdev(clk, "ddr_clk", NULL); |
| |
| clk = clk_register_divider(NULL, "apb_clk", "ahb_clk", |
| CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT, |
| PCLK_RATIO_MASK, 0, &_lock); |
| clk_register_clkdev(clk, "apb_clk", NULL); |
| |
| clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB, |
| DMA_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "fc400000.dma"); |
| |
| clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, PERIP1_CLK_ENB, |
| FSMC_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "d1800000.flash"); |
| |
| clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB, |
| GMAC_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "e0800000.ethernet"); |
| |
| clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB, |
| I2C_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "d0200000.i2c"); |
| |
| clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB, |
| JPEG_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "jpeg"); |
| |
| clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB, |
| SMI_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "fc000000.flash"); |
| |
| /* clock derived from apb clk */ |
| clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB, |
| ADC_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "adc"); |
| |
| clk = clk_register_fixed_factor(NULL, "gpio0_clk", "apb_clk", 0, 1, 1); |
| clk_register_clkdev(clk, NULL, "f0100000.gpio"); |
| |
| clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, PERIP1_CLK_ENB, |
| GPIO1_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "fc980000.gpio"); |
| |
| clk = clk_register_gate(NULL, "gpio2_clk", "apb_clk", 0, PERIP1_CLK_ENB, |
| GPIO2_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "d8100000.gpio"); |
| |
| clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB, |
| SSP0_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "ssp-pl022.0"); |
| |
| clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB, |
| SSP1_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "ssp-pl022.1"); |
| |
| clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB, |
| SSP2_CLK_ENB, 0, &_lock); |
| clk_register_clkdev(clk, NULL, "ssp-pl022.2"); |
| } |