| /* |
| * Support for indirect PCI bridges. |
| * |
| * Copyright (C) 1998 Gabriel Paubert. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| |
| static int |
| indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset, |
| int len, u32 *val) |
| { |
| struct pci_controller *hose = bus->sysdata; |
| volatile void __iomem *cfg_data; |
| u8 cfg_type = 0; |
| u32 bus_no, reg; |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) { |
| if (bus->number != hose->first_busno) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (devfn != 0) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| if (ppc_md.pci_exclude_device) |
| if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE) |
| if (bus->number != hose->first_busno) |
| cfg_type = 1; |
| |
| bus_no = (bus->number == hose->first_busno) ? |
| hose->self_busno : bus->number; |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG) |
| reg = ((offset & 0xf00) << 16) | (offset & 0xfc); |
| else |
| reg = offset & 0xfc; |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_BIG_ENDIAN) |
| out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | |
| (devfn << 8) | reg | cfg_type)); |
| else |
| out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | |
| (devfn << 8) | reg | cfg_type)); |
| |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| cfg_data = hose->cfg_data + (offset & 3); |
| switch (len) { |
| case 1: |
| *val = in_8(cfg_data); |
| break; |
| case 2: |
| *val = in_le16(cfg_data); |
| break; |
| default: |
| *val = in_le32(cfg_data); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int |
| indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, |
| int len, u32 val) |
| { |
| struct pci_controller *hose = bus->sysdata; |
| volatile void __iomem *cfg_data; |
| u8 cfg_type = 0; |
| u32 bus_no, reg; |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) { |
| if (bus->number != hose->first_busno) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (devfn != 0) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| if (ppc_md.pci_exclude_device) |
| if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE) |
| if (bus->number != hose->first_busno) |
| cfg_type = 1; |
| |
| bus_no = (bus->number == hose->first_busno) ? |
| hose->self_busno : bus->number; |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG) |
| reg = ((offset & 0xf00) << 16) | (offset & 0xfc); |
| else |
| reg = offset & 0xfc; |
| |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_BIG_ENDIAN) |
| out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | |
| (devfn << 8) | reg | cfg_type)); |
| else |
| out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | |
| (devfn << 8) | reg | cfg_type)); |
| |
| /* surpress setting of PCI_PRIMARY_BUS */ |
| if (hose->indirect_type & PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) |
| if ((offset == PCI_PRIMARY_BUS) && |
| (bus->number == hose->first_busno)) |
| val &= 0xffffff00; |
| |
| /* Workaround for PCI_28 Errata in 440EPx/GRx */ |
| if ((hose->indirect_type & PPC_INDIRECT_TYPE_BROKEN_MRM) && |
| offset == PCI_CACHE_LINE_SIZE) { |
| val = 0; |
| } |
| |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| cfg_data = hose->cfg_data + (offset & 3); |
| switch (len) { |
| case 1: |
| out_8(cfg_data, val); |
| break; |
| case 2: |
| out_le16(cfg_data, val); |
| break; |
| default: |
| out_le32(cfg_data, val); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops indirect_pci_ops = |
| { |
| .read = indirect_read_config, |
| .write = indirect_write_config, |
| }; |
| |
| void __init |
| setup_indirect_pci(struct pci_controller* hose, |
| resource_size_t cfg_addr, |
| resource_size_t cfg_data, u32 flags) |
| { |
| resource_size_t base = cfg_addr & PAGE_MASK; |
| void __iomem *mbase; |
| |
| mbase = ioremap(base, PAGE_SIZE); |
| hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK); |
| if ((cfg_data & PAGE_MASK) != base) |
| mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE); |
| hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK); |
| hose->ops = &indirect_pci_ops; |
| hose->indirect_type = flags; |
| } |