| /* |
| * linux/arch/arm/mach-omap1/irq.c |
| * |
| * Interrupt handler for all OMAP boards |
| * |
| * Copyright (C) 2004 Nokia Corporation |
| * Written by Tony Lindgren <tony@atomide.com> |
| * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com> |
| * |
| * Completely re-written to support various OMAP chips with bank specific |
| * interrupt handlers. |
| * |
| * Some snippets of the code taken from the older OMAP interrupt handler |
| * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> |
| * |
| * GPIO interrupt handler moved to gpio.c by Juha Yrjola |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/ptrace.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/mach/irq.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/cpu.h> |
| |
| #include <asm/io.h> |
| |
| #define IRQ_BANK(irq) ((irq) >> 5) |
| #define IRQ_BIT(irq) ((irq) & 0x1f) |
| |
| struct omap_irq_bank { |
| unsigned long base_reg; |
| unsigned long trigger_map; |
| unsigned long wake_enable; |
| }; |
| |
| static unsigned int irq_bank_count; |
| static struct omap_irq_bank *irq_banks; |
| |
| static inline unsigned int irq_bank_readl(int bank, int offset) |
| { |
| return omap_readl(irq_banks[bank].base_reg + offset); |
| } |
| |
| static inline void irq_bank_writel(unsigned long value, int bank, int offset) |
| { |
| omap_writel(value, irq_banks[bank].base_reg + offset); |
| } |
| |
| static void omap_ack_irq(unsigned int irq) |
| { |
| if (irq > 31) |
| omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET); |
| |
| omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET); |
| } |
| |
| static void omap_mask_irq(unsigned int irq) |
| { |
| int bank = IRQ_BANK(irq); |
| u32 l; |
| |
| l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); |
| l |= 1 << IRQ_BIT(irq); |
| omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); |
| } |
| |
| static void omap_unmask_irq(unsigned int irq) |
| { |
| int bank = IRQ_BANK(irq); |
| u32 l; |
| |
| l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); |
| l &= ~(1 << IRQ_BIT(irq)); |
| omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); |
| } |
| |
| static void omap_mask_ack_irq(unsigned int irq) |
| { |
| omap_mask_irq(irq); |
| omap_ack_irq(irq); |
| } |
| |
| static int omap_wake_irq(unsigned int irq, unsigned int enable) |
| { |
| int bank = IRQ_BANK(irq); |
| |
| if (enable) |
| irq_banks[bank].wake_enable |= IRQ_BIT(irq); |
| else |
| irq_banks[bank].wake_enable &= ~IRQ_BIT(irq); |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Allows tuning the IRQ type and priority |
| * |
| * NOTE: There is currently no OMAP fiq handler for Linux. Read the |
| * mailing list threads on FIQ handlers if you are planning to |
| * add a FIQ handler for OMAP. |
| */ |
| static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) |
| { |
| signed int bank; |
| unsigned long val, offset; |
| |
| bank = IRQ_BANK(irq); |
| /* FIQ is only available on bank 0 interrupts */ |
| fiq = bank ? 0 : (fiq & 0x1); |
| val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1); |
| offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4; |
| irq_bank_writel(val, bank, offset); |
| } |
| |
| #ifdef CONFIG_ARCH_OMAP730 |
| static struct omap_irq_bank omap730_irq_banks[] = { |
| { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, |
| { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, |
| { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, |
| }; |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP15XX |
| static struct omap_irq_bank omap1510_irq_banks[] = { |
| { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, |
| { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed }, |
| }; |
| static struct omap_irq_bank omap310_irq_banks[] = { |
| { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 }, |
| { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 }, |
| }; |
| #endif |
| |
| #if defined(CONFIG_ARCH_OMAP16XX) |
| |
| static struct omap_irq_bank omap1610_irq_banks[] = { |
| { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f }, |
| { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd }, |
| { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff }, |
| { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff }, |
| }; |
| #endif |
| |
| static struct irq_chip omap_irq_chip = { |
| .name = "MPU", |
| .ack = omap_mask_ack_irq, |
| .mask = omap_mask_irq, |
| .unmask = omap_unmask_irq, |
| .set_wake = omap_wake_irq, |
| }; |
| |
| void __init omap_init_irq(void) |
| { |
| int i, j; |
| |
| #ifdef CONFIG_ARCH_OMAP730 |
| if (cpu_is_omap730()) { |
| irq_banks = omap730_irq_banks; |
| irq_bank_count = ARRAY_SIZE(omap730_irq_banks); |
| } |
| #endif |
| #ifdef CONFIG_ARCH_OMAP15XX |
| if (cpu_is_omap1510()) { |
| irq_banks = omap1510_irq_banks; |
| irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); |
| } |
| if (cpu_is_omap310()) { |
| irq_banks = omap310_irq_banks; |
| irq_bank_count = ARRAY_SIZE(omap310_irq_banks); |
| } |
| #endif |
| #if defined(CONFIG_ARCH_OMAP16XX) |
| if (cpu_is_omap16xx()) { |
| irq_banks = omap1610_irq_banks; |
| irq_bank_count = ARRAY_SIZE(omap1610_irq_banks); |
| } |
| #endif |
| printk("Total of %i interrupts in %i interrupt banks\n", |
| irq_bank_count * 32, irq_bank_count); |
| |
| /* Mask and clear all interrupts */ |
| for (i = 0; i < irq_bank_count; i++) { |
| irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET); |
| irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET); |
| } |
| |
| /* Clear any pending interrupts */ |
| irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET); |
| irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET); |
| |
| /* Enable interrupts in global mask */ |
| if (cpu_is_omap730()) { |
| irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET); |
| } |
| |
| /* Install the interrupt handlers for each bank */ |
| for (i = 0; i < irq_bank_count; i++) { |
| for (j = i * 32; j < (i + 1) * 32; j++) { |
| int irq_trigger; |
| |
| irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j); |
| omap_irq_set_cfg(j, 0, 0, irq_trigger); |
| |
| set_irq_chip(j, &omap_irq_chip); |
| set_irq_handler(j, handle_level_irq); |
| set_irq_flags(j, IRQF_VALID); |
| } |
| } |
| |
| /* Unmask level 2 handler */ |
| |
| if (cpu_is_omap730()) |
| omap_unmask_irq(INT_730_IH2_IRQ); |
| else if (cpu_is_omap1510()) |
| omap_unmask_irq(INT_1510_IH2_IRQ); |
| else if (cpu_is_omap16xx()) |
| omap_unmask_irq(INT_1610_IH2_IRQ); |
| } |