| /* |
| * arch/powerpc/kernel/mpic.c |
| * |
| * Driver for interrupt controllers following the OpenPIC standard, the |
| * common implementation beeing IBM's MPIC. This driver also can deal |
| * with various broken implementations of this HW. |
| * |
| * Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive |
| * for more details. |
| */ |
| |
| #undef DEBUG |
| #undef DEBUG_IPI |
| #undef DEBUG_IRQ |
| #undef DEBUG_LOW |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/bootmem.h> |
| #include <linux/spinlock.h> |
| #include <linux/pci.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/signal.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/irq.h> |
| #include <asm/machdep.h> |
| #include <asm/mpic.h> |
| #include <asm/smp.h> |
| |
| #ifdef DEBUG |
| #define DBG(fmt...) printk(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| static struct mpic *mpics; |
| static struct mpic *mpic_primary; |
| static DEFINE_SPINLOCK(mpic_lock); |
| |
| #ifdef CONFIG_PPC32 /* XXX for now */ |
| #ifdef CONFIG_IRQ_ALL_CPUS |
| #define distribute_irqs (1) |
| #else |
| #define distribute_irqs (0) |
| #endif |
| #endif |
| |
| /* |
| * Register accessor functions |
| */ |
| |
| |
| static inline u32 _mpic_read(unsigned int be, volatile u32 __iomem *base, |
| unsigned int reg) |
| { |
| if (be) |
| return in_be32(base + (reg >> 2)); |
| else |
| return in_le32(base + (reg >> 2)); |
| } |
| |
| static inline void _mpic_write(unsigned int be, volatile u32 __iomem *base, |
| unsigned int reg, u32 value) |
| { |
| if (be) |
| out_be32(base + (reg >> 2), value); |
| else |
| out_le32(base + (reg >> 2), value); |
| } |
| |
| static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi) |
| { |
| unsigned int be = (mpic->flags & MPIC_BIG_ENDIAN) != 0; |
| unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10); |
| |
| if (mpic->flags & MPIC_BROKEN_IPI) |
| be = !be; |
| return _mpic_read(be, mpic->gregs, offset); |
| } |
| |
| static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 value) |
| { |
| unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10); |
| |
| _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->gregs, offset, value); |
| } |
| |
| static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg) |
| { |
| unsigned int cpu = 0; |
| |
| if (mpic->flags & MPIC_PRIMARY) |
| cpu = hard_smp_processor_id(); |
| |
| return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->cpuregs[cpu], reg); |
| } |
| |
| static inline void _mpic_cpu_write(struct mpic *mpic, unsigned int reg, u32 value) |
| { |
| unsigned int cpu = 0; |
| |
| if (mpic->flags & MPIC_PRIMARY) |
| cpu = hard_smp_processor_id(); |
| |
| _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->cpuregs[cpu], reg, value); |
| } |
| |
| static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigned int reg) |
| { |
| unsigned int isu = src_no >> mpic->isu_shift; |
| unsigned int idx = src_no & mpic->isu_mask; |
| |
| return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu], |
| reg + (idx * MPIC_IRQ_STRIDE)); |
| } |
| |
| static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, |
| unsigned int reg, u32 value) |
| { |
| unsigned int isu = src_no >> mpic->isu_shift; |
| unsigned int idx = src_no & mpic->isu_mask; |
| |
| _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu], |
| reg + (idx * MPIC_IRQ_STRIDE), value); |
| } |
| |
| #define mpic_read(b,r) _mpic_read(mpic->flags & MPIC_BIG_ENDIAN,(b),(r)) |
| #define mpic_write(b,r,v) _mpic_write(mpic->flags & MPIC_BIG_ENDIAN,(b),(r),(v)) |
| #define mpic_ipi_read(i) _mpic_ipi_read(mpic,(i)) |
| #define mpic_ipi_write(i,v) _mpic_ipi_write(mpic,(i),(v)) |
| #define mpic_cpu_read(i) _mpic_cpu_read(mpic,(i)) |
| #define mpic_cpu_write(i,v) _mpic_cpu_write(mpic,(i),(v)) |
| #define mpic_irq_read(s,r) _mpic_irq_read(mpic,(s),(r)) |
| #define mpic_irq_write(s,r,v) _mpic_irq_write(mpic,(s),(r),(v)) |
| |
| |
| /* |
| * Low level utility functions |
| */ |
| |
| |
| |
| /* Check if we have one of those nice broken MPICs with a flipped endian on |
| * reads from IPI registers |
| */ |
| static void __init mpic_test_broken_ipi(struct mpic *mpic) |
| { |
| u32 r; |
| |
| mpic_write(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0, MPIC_VECPRI_MASK); |
| r = mpic_read(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0); |
| |
| if (r == le32_to_cpu(MPIC_VECPRI_MASK)) { |
| printk(KERN_INFO "mpic: Detected reversed IPI registers\n"); |
| mpic->flags |= MPIC_BROKEN_IPI; |
| } |
| } |
| |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| |
| /* Test if an interrupt is sourced from HyperTransport (used on broken U3s) |
| * to force the edge setting on the MPIC and do the ack workaround. |
| */ |
| static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source) |
| { |
| if (source >= 128 || !mpic->fixups) |
| return 0; |
| return mpic->fixups[source].base != NULL; |
| } |
| |
| |
| static inline void mpic_ht_end_irq(struct mpic *mpic, unsigned int source) |
| { |
| struct mpic_irq_fixup *fixup = &mpic->fixups[source]; |
| |
| if (fixup->applebase) { |
| unsigned int soff = (fixup->index >> 3) & ~3; |
| unsigned int mask = 1U << (fixup->index & 0x1f); |
| writel(mask, fixup->applebase + soff); |
| } else { |
| spin_lock(&mpic->fixup_lock); |
| writeb(0x11 + 2 * fixup->index, fixup->base + 2); |
| writel(fixup->data, fixup->base + 4); |
| spin_unlock(&mpic->fixup_lock); |
| } |
| } |
| |
| static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source, |
| unsigned int irqflags) |
| { |
| struct mpic_irq_fixup *fixup = &mpic->fixups[source]; |
| unsigned long flags; |
| u32 tmp; |
| |
| if (fixup->base == NULL) |
| return; |
| |
| DBG("startup_ht_interrupt(%u, %u) index: %d\n", |
| source, irqflags, fixup->index); |
| spin_lock_irqsave(&mpic->fixup_lock, flags); |
| /* Enable and configure */ |
| writeb(0x10 + 2 * fixup->index, fixup->base + 2); |
| tmp = readl(fixup->base + 4); |
| tmp &= ~(0x23U); |
| if (irqflags & IRQ_LEVEL) |
| tmp |= 0x22; |
| writel(tmp, fixup->base + 4); |
| spin_unlock_irqrestore(&mpic->fixup_lock, flags); |
| } |
| |
| static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source, |
| unsigned int irqflags) |
| { |
| struct mpic_irq_fixup *fixup = &mpic->fixups[source]; |
| unsigned long flags; |
| u32 tmp; |
| |
| if (fixup->base == NULL) |
| return; |
| |
| DBG("shutdown_ht_interrupt(%u, %u)\n", source, irqflags); |
| |
| /* Disable */ |
| spin_lock_irqsave(&mpic->fixup_lock, flags); |
| writeb(0x10 + 2 * fixup->index, fixup->base + 2); |
| tmp = readl(fixup->base + 4); |
| tmp |= 1; |
| writel(tmp, fixup->base + 4); |
| spin_unlock_irqrestore(&mpic->fixup_lock, flags); |
| } |
| |
| static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase, |
| unsigned int devfn, u32 vdid) |
| { |
| int i, irq, n; |
| u8 __iomem *base; |
| u32 tmp; |
| u8 pos; |
| |
| for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0; |
| pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) { |
| u8 id = readb(devbase + pos + PCI_CAP_LIST_ID); |
| if (id == PCI_CAP_ID_HT_IRQCONF) { |
| id = readb(devbase + pos + 3); |
| if (id == 0x80) |
| break; |
| } |
| } |
| if (pos == 0) |
| return; |
| |
| base = devbase + pos; |
| writeb(0x01, base + 2); |
| n = (readl(base + 4) >> 16) & 0xff; |
| |
| printk(KERN_INFO "mpic: - HT:%02x.%x [0x%02x] vendor %04x device %04x" |
| " has %d irqs\n", |
| devfn >> 3, devfn & 0x7, pos, vdid & 0xffff, vdid >> 16, n + 1); |
| |
| for (i = 0; i <= n; i++) { |
| writeb(0x10 + 2 * i, base + 2); |
| tmp = readl(base + 4); |
| irq = (tmp >> 16) & 0xff; |
| DBG("HT PIC index 0x%x, irq 0x%x, tmp: %08x\n", i, irq, tmp); |
| /* mask it , will be unmasked later */ |
| tmp |= 0x1; |
| writel(tmp, base + 4); |
| mpic->fixups[irq].index = i; |
| mpic->fixups[irq].base = base; |
| /* Apple HT PIC has a non-standard way of doing EOIs */ |
| if ((vdid & 0xffff) == 0x106b) |
| mpic->fixups[irq].applebase = devbase + 0x60; |
| else |
| mpic->fixups[irq].applebase = NULL; |
| writeb(0x11 + 2 * i, base + 2); |
| mpic->fixups[irq].data = readl(base + 4) | 0x80000000; |
| } |
| } |
| |
| |
| static void __init mpic_scan_ht_pics(struct mpic *mpic) |
| { |
| unsigned int devfn; |
| u8 __iomem *cfgspace; |
| |
| printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n"); |
| |
| /* Allocate fixups array */ |
| mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup)); |
| BUG_ON(mpic->fixups == NULL); |
| memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup)); |
| |
| /* Init spinlock */ |
| spin_lock_init(&mpic->fixup_lock); |
| |
| /* Map U3 config space. We assume all IO-APICs are on the primary bus |
| * so we only need to map 64kB. |
| */ |
| cfgspace = ioremap(0xf2000000, 0x10000); |
| BUG_ON(cfgspace == NULL); |
| |
| /* Now we scan all slots. We do a very quick scan, we read the header |
| * type, vendor ID and device ID only, that's plenty enough |
| */ |
| for (devfn = 0; devfn < 0x100; devfn++) { |
| u8 __iomem *devbase = cfgspace + (devfn << 8); |
| u8 hdr_type = readb(devbase + PCI_HEADER_TYPE); |
| u32 l = readl(devbase + PCI_VENDOR_ID); |
| u16 s; |
| |
| DBG("devfn %x, l: %x\n", devfn, l); |
| |
| /* If no device, skip */ |
| if (l == 0xffffffff || l == 0x00000000 || |
| l == 0x0000ffff || l == 0xffff0000) |
| goto next; |
| /* Check if is supports capability lists */ |
| s = readw(devbase + PCI_STATUS); |
| if (!(s & PCI_STATUS_CAP_LIST)) |
| goto next; |
| |
| mpic_scan_ht_pic(mpic, devbase, devfn, l); |
| |
| next: |
| /* next device, if function 0 */ |
| if (PCI_FUNC(devfn) == 0 && (hdr_type & 0x80) == 0) |
| devfn += 7; |
| } |
| } |
| |
| #endif /* CONFIG_MPIC_BROKEN_U3 */ |
| |
| |
| /* Find an mpic associated with a given linux interrupt */ |
| static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi) |
| { |
| struct mpic *mpic = mpics; |
| |
| while(mpic) { |
| /* search IPIs first since they may override the main interrupts */ |
| if (irq >= mpic->ipi_offset && irq < (mpic->ipi_offset + 4)) { |
| if (is_ipi) |
| *is_ipi = 1; |
| return mpic; |
| } |
| if (irq >= mpic->irq_offset && |
| irq < (mpic->irq_offset + mpic->irq_count)) { |
| if (is_ipi) |
| *is_ipi = 0; |
| return mpic; |
| } |
| mpic = mpic -> next; |
| } |
| return NULL; |
| } |
| |
| /* Convert a cpu mask from logical to physical cpu numbers. */ |
| static inline u32 mpic_physmask(u32 cpumask) |
| { |
| int i; |
| u32 mask = 0; |
| |
| for (i = 0; i < NR_CPUS; ++i, cpumask >>= 1) |
| mask |= (cpumask & 1) << get_hard_smp_processor_id(i); |
| return mask; |
| } |
| |
| #ifdef CONFIG_SMP |
| /* Get the mpic structure from the IPI number */ |
| static inline struct mpic * mpic_from_ipi(unsigned int ipi) |
| { |
| return container_of(irq_desc[ipi].chip, struct mpic, hc_ipi); |
| } |
| #endif |
| |
| /* Get the mpic structure from the irq number */ |
| static inline struct mpic * mpic_from_irq(unsigned int irq) |
| { |
| return container_of(irq_desc[irq].chip, struct mpic, hc_irq); |
| } |
| |
| /* Send an EOI */ |
| static inline void mpic_eoi(struct mpic *mpic) |
| { |
| mpic_cpu_write(MPIC_CPU_EOI, 0); |
| (void)mpic_cpu_read(MPIC_CPU_WHOAMI); |
| } |
| |
| #ifdef CONFIG_SMP |
| static irqreturn_t mpic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct mpic *mpic = dev_id; |
| |
| smp_message_recv(irq - mpic->ipi_offset, regs); |
| return IRQ_HANDLED; |
| } |
| #endif /* CONFIG_SMP */ |
| |
| /* |
| * Linux descriptor level callbacks |
| */ |
| |
| |
| static void mpic_enable_irq(unsigned int irq) |
| { |
| unsigned int loops = 100000; |
| struct mpic *mpic = mpic_from_irq(irq); |
| unsigned int src = irq - mpic->irq_offset; |
| |
| DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src); |
| |
| mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, |
| mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & |
| ~MPIC_VECPRI_MASK); |
| |
| /* make sure mask gets to controller before we return to user */ |
| do { |
| if (!loops--) { |
| printk(KERN_ERR "mpic_enable_irq timeout\n"); |
| break; |
| } |
| } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK); |
| |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| if (mpic->flags & MPIC_BROKEN_U3) { |
| unsigned int src = irq - mpic->irq_offset; |
| if (mpic_is_ht_interrupt(mpic, src) && |
| (irq_desc[irq].status & IRQ_LEVEL)) |
| mpic_ht_end_irq(mpic, src); |
| } |
| #endif /* CONFIG_MPIC_BROKEN_U3 */ |
| } |
| |
| static unsigned int mpic_startup_irq(unsigned int irq) |
| { |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| struct mpic *mpic = mpic_from_irq(irq); |
| unsigned int src = irq - mpic->irq_offset; |
| #endif /* CONFIG_MPIC_BROKEN_U3 */ |
| |
| mpic_enable_irq(irq); |
| |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| if (mpic_is_ht_interrupt(mpic, src)) |
| mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status); |
| #endif /* CONFIG_MPIC_BROKEN_U3 */ |
| |
| return 0; |
| } |
| |
| static void mpic_disable_irq(unsigned int irq) |
| { |
| unsigned int loops = 100000; |
| struct mpic *mpic = mpic_from_irq(irq); |
| unsigned int src = irq - mpic->irq_offset; |
| |
| DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src); |
| |
| mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, |
| mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) | |
| MPIC_VECPRI_MASK); |
| |
| /* make sure mask gets to controller before we return to user */ |
| do { |
| if (!loops--) { |
| printk(KERN_ERR "mpic_enable_irq timeout\n"); |
| break; |
| } |
| } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK)); |
| } |
| |
| static void mpic_shutdown_irq(unsigned int irq) |
| { |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| struct mpic *mpic = mpic_from_irq(irq); |
| unsigned int src = irq - mpic->irq_offset; |
| |
| if (mpic_is_ht_interrupt(mpic, src)) |
| mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status); |
| |
| #endif /* CONFIG_MPIC_BROKEN_U3 */ |
| |
| mpic_disable_irq(irq); |
| } |
| |
| static void mpic_end_irq(unsigned int irq) |
| { |
| struct mpic *mpic = mpic_from_irq(irq); |
| |
| #ifdef DEBUG_IRQ |
| DBG("%s: end_irq: %d\n", mpic->name, irq); |
| #endif |
| /* We always EOI on end_irq() even for edge interrupts since that |
| * should only lower the priority, the MPIC should have properly |
| * latched another edge interrupt coming in anyway |
| */ |
| |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| if (mpic->flags & MPIC_BROKEN_U3) { |
| unsigned int src = irq - mpic->irq_offset; |
| if (mpic_is_ht_interrupt(mpic, src) && |
| (irq_desc[irq].status & IRQ_LEVEL)) |
| mpic_ht_end_irq(mpic, src); |
| } |
| #endif /* CONFIG_MPIC_BROKEN_U3 */ |
| |
| mpic_eoi(mpic); |
| } |
| |
| #ifdef CONFIG_SMP |
| |
| static void mpic_enable_ipi(unsigned int irq) |
| { |
| struct mpic *mpic = mpic_from_ipi(irq); |
| unsigned int src = irq - mpic->ipi_offset; |
| |
| DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, irq, src); |
| mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK); |
| } |
| |
| static void mpic_disable_ipi(unsigned int irq) |
| { |
| /* NEVER disable an IPI... that's just plain wrong! */ |
| } |
| |
| static void mpic_end_ipi(unsigned int irq) |
| { |
| struct mpic *mpic = mpic_from_ipi(irq); |
| |
| /* |
| * IPIs are marked IRQ_PER_CPU. This has the side effect of |
| * preventing the IRQ_PENDING/IRQ_INPROGRESS logic from |
| * applying to them. We EOI them late to avoid re-entering. |
| * We mark IPI's with IRQF_DISABLED as they must run with |
| * irqs disabled. |
| */ |
| mpic_eoi(mpic); |
| } |
| |
| #endif /* CONFIG_SMP */ |
| |
| static void mpic_set_affinity(unsigned int irq, cpumask_t cpumask) |
| { |
| struct mpic *mpic = mpic_from_irq(irq); |
| |
| cpumask_t tmp; |
| |
| cpus_and(tmp, cpumask, cpu_online_map); |
| |
| mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_DESTINATION, |
| mpic_physmask(cpus_addr(tmp)[0])); |
| } |
| |
| |
| /* |
| * Exported functions |
| */ |
| |
| |
| struct mpic * __init mpic_alloc(unsigned long phys_addr, |
| unsigned int flags, |
| unsigned int isu_size, |
| unsigned int irq_offset, |
| unsigned int irq_count, |
| unsigned int ipi_offset, |
| unsigned char *senses, |
| unsigned int senses_count, |
| const char *name) |
| { |
| struct mpic *mpic; |
| u32 reg; |
| const char *vers; |
| int i; |
| |
| mpic = alloc_bootmem(sizeof(struct mpic)); |
| if (mpic == NULL) |
| return NULL; |
| |
| |
| memset(mpic, 0, sizeof(struct mpic)); |
| mpic->name = name; |
| |
| mpic->hc_irq.typename = name; |
| mpic->hc_irq.startup = mpic_startup_irq; |
| mpic->hc_irq.shutdown = mpic_shutdown_irq; |
| mpic->hc_irq.enable = mpic_enable_irq; |
| mpic->hc_irq.disable = mpic_disable_irq; |
| mpic->hc_irq.end = mpic_end_irq; |
| if (flags & MPIC_PRIMARY) |
| mpic->hc_irq.set_affinity = mpic_set_affinity; |
| #ifdef CONFIG_SMP |
| mpic->hc_ipi.typename = name; |
| mpic->hc_ipi.enable = mpic_enable_ipi; |
| mpic->hc_ipi.disable = mpic_disable_ipi; |
| mpic->hc_ipi.end = mpic_end_ipi; |
| #endif /* CONFIG_SMP */ |
| |
| mpic->flags = flags; |
| mpic->isu_size = isu_size; |
| mpic->irq_offset = irq_offset; |
| mpic->irq_count = irq_count; |
| mpic->ipi_offset = ipi_offset; |
| mpic->num_sources = 0; /* so far */ |
| mpic->senses = senses; |
| mpic->senses_count = senses_count; |
| |
| /* Map the global registers */ |
| mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000); |
| mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2); |
| BUG_ON(mpic->gregs == NULL); |
| |
| /* Reset */ |
| if (flags & MPIC_WANTS_RESET) { |
| mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0, |
| mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0) |
| | MPIC_GREG_GCONF_RESET); |
| while( mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0) |
| & MPIC_GREG_GCONF_RESET) |
| mb(); |
| } |
| |
| /* Read feature register, calculate num CPUs and, for non-ISU |
| * MPICs, num sources as well. On ISU MPICs, sources are counted |
| * as ISUs are added |
| */ |
| reg = mpic_read(mpic->gregs, MPIC_GREG_FEATURE_0); |
| mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK) |
| >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1; |
| if (isu_size == 0) |
| mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK) |
| >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1; |
| |
| /* Map the per-CPU registers */ |
| for (i = 0; i < mpic->num_cpus; i++) { |
| mpic->cpuregs[i] = ioremap(phys_addr + MPIC_CPU_BASE + |
| i * MPIC_CPU_STRIDE, 0x1000); |
| BUG_ON(mpic->cpuregs[i] == NULL); |
| } |
| |
| /* Initialize main ISU if none provided */ |
| if (mpic->isu_size == 0) { |
| mpic->isu_size = mpic->num_sources; |
| mpic->isus[0] = ioremap(phys_addr + MPIC_IRQ_BASE, |
| MPIC_IRQ_STRIDE * mpic->isu_size); |
| BUG_ON(mpic->isus[0] == NULL); |
| } |
| mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); |
| mpic->isu_mask = (1 << mpic->isu_shift) - 1; |
| |
| /* Display version */ |
| switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) { |
| case 1: |
| vers = "1.0"; |
| break; |
| case 2: |
| vers = "1.2"; |
| break; |
| case 3: |
| vers = "1.3"; |
| break; |
| default: |
| vers = "<unknown>"; |
| break; |
| } |
| printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %lx, max %d CPUs\n", |
| name, vers, phys_addr, mpic->num_cpus); |
| printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n", mpic->isu_size, |
| mpic->isu_shift, mpic->isu_mask); |
| |
| mpic->next = mpics; |
| mpics = mpic; |
| |
| if (flags & MPIC_PRIMARY) |
| mpic_primary = mpic; |
| |
| return mpic; |
| } |
| |
| void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, |
| unsigned long phys_addr) |
| { |
| unsigned int isu_first = isu_num * mpic->isu_size; |
| |
| BUG_ON(isu_num >= MPIC_MAX_ISU); |
| |
| mpic->isus[isu_num] = ioremap(phys_addr, MPIC_IRQ_STRIDE * mpic->isu_size); |
| if ((isu_first + mpic->isu_size) > mpic->num_sources) |
| mpic->num_sources = isu_first + mpic->isu_size; |
| } |
| |
| void __init mpic_setup_cascade(unsigned int irq, mpic_cascade_t handler, |
| void *data) |
| { |
| struct mpic *mpic = mpic_find(irq, NULL); |
| unsigned long flags; |
| |
| /* Synchronization here is a bit dodgy, so don't try to replace cascade |
| * interrupts on the fly too often ... but normally it's set up at boot. |
| */ |
| spin_lock_irqsave(&mpic_lock, flags); |
| if (mpic->cascade) |
| mpic_disable_irq(mpic->cascade_vec + mpic->irq_offset); |
| mpic->cascade = NULL; |
| wmb(); |
| mpic->cascade_vec = irq - mpic->irq_offset; |
| mpic->cascade_data = data; |
| wmb(); |
| mpic->cascade = handler; |
| mpic_enable_irq(irq); |
| spin_unlock_irqrestore(&mpic_lock, flags); |
| } |
| |
| void __init mpic_init(struct mpic *mpic) |
| { |
| int i; |
| |
| BUG_ON(mpic->num_sources == 0); |
| |
| printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources); |
| |
| /* Set current processor priority to max */ |
| mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf); |
| |
| /* Initialize timers: just disable them all */ |
| for (i = 0; i < 4; i++) { |
| mpic_write(mpic->tmregs, |
| i * MPIC_TIMER_STRIDE + MPIC_TIMER_DESTINATION, 0); |
| mpic_write(mpic->tmregs, |
| i * MPIC_TIMER_STRIDE + MPIC_TIMER_VECTOR_PRI, |
| MPIC_VECPRI_MASK | |
| (MPIC_VEC_TIMER_0 + i)); |
| } |
| |
| /* Initialize IPIs to our reserved vectors and mark them disabled for now */ |
| mpic_test_broken_ipi(mpic); |
| for (i = 0; i < 4; i++) { |
| mpic_ipi_write(i, |
| MPIC_VECPRI_MASK | |
| (10 << MPIC_VECPRI_PRIORITY_SHIFT) | |
| (MPIC_VEC_IPI_0 + i)); |
| #ifdef CONFIG_SMP |
| if (!(mpic->flags & MPIC_PRIMARY)) |
| continue; |
| irq_desc[mpic->ipi_offset+i].status |= IRQ_PER_CPU; |
| irq_desc[mpic->ipi_offset+i].chip = &mpic->hc_ipi; |
| #endif /* CONFIG_SMP */ |
| } |
| |
| /* Initialize interrupt sources */ |
| if (mpic->irq_count == 0) |
| mpic->irq_count = mpic->num_sources; |
| |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| /* Do the HT PIC fixups on U3 broken mpic */ |
| DBG("MPIC flags: %x\n", mpic->flags); |
| if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY)) |
| mpic_scan_ht_pics(mpic); |
| #endif /* CONFIG_MPIC_BROKEN_U3 */ |
| |
| for (i = 0; i < mpic->num_sources; i++) { |
| /* start with vector = source number, and masked */ |
| u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT); |
| int level = 0; |
| |
| /* if it's an IPI, we skip it */ |
| if ((mpic->irq_offset + i) >= (mpic->ipi_offset + i) && |
| (mpic->irq_offset + i) < (mpic->ipi_offset + i + 4)) |
| continue; |
| |
| /* do senses munging */ |
| if (mpic->senses && i < mpic->senses_count) { |
| if (mpic->senses[i] & IRQ_SENSE_LEVEL) |
| vecpri |= MPIC_VECPRI_SENSE_LEVEL; |
| if (mpic->senses[i] & IRQ_POLARITY_POSITIVE) |
| vecpri |= MPIC_VECPRI_POLARITY_POSITIVE; |
| } else |
| vecpri |= MPIC_VECPRI_SENSE_LEVEL; |
| |
| /* remember if it was a level interrupts */ |
| level = (vecpri & MPIC_VECPRI_SENSE_LEVEL); |
| |
| /* deal with broken U3 */ |
| if (mpic->flags & MPIC_BROKEN_U3) { |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| if (mpic_is_ht_interrupt(mpic, i)) { |
| vecpri &= ~(MPIC_VECPRI_SENSE_MASK | |
| MPIC_VECPRI_POLARITY_MASK); |
| vecpri |= MPIC_VECPRI_POLARITY_POSITIVE; |
| } |
| #else |
| printk(KERN_ERR "mpic: BROKEN_U3 set, but CONFIG doesn't match\n"); |
| #endif |
| } |
| |
| DBG("setup source %d, vecpri: %08x, level: %d\n", i, vecpri, |
| (level != 0)); |
| |
| /* init hw */ |
| mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri); |
| mpic_irq_write(i, MPIC_IRQ_DESTINATION, |
| 1 << hard_smp_processor_id()); |
| |
| /* init linux descriptors */ |
| if (i < mpic->irq_count) { |
| irq_desc[mpic->irq_offset+i].status = level ? IRQ_LEVEL : 0; |
| irq_desc[mpic->irq_offset+i].chip = &mpic->hc_irq; |
| } |
| } |
| |
| /* Init spurrious vector */ |
| mpic_write(mpic->gregs, MPIC_GREG_SPURIOUS, MPIC_VEC_SPURRIOUS); |
| |
| /* Disable 8259 passthrough */ |
| mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0, |
| mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0) |
| | MPIC_GREG_GCONF_8259_PTHROU_DIS); |
| |
| /* Set current processor priority to 0 */ |
| mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0); |
| } |
| |
| void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) |
| { |
| u32 v; |
| |
| v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1); |
| v &= ~MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK; |
| v |= MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(clock_ratio); |
| mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v); |
| } |
| |
| void __init mpic_set_serial_int(struct mpic *mpic, int enable) |
| { |
| u32 v; |
| |
| v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1); |
| if (enable) |
| v |= MPIC_GREG_GLOBAL_CONF_1_SIE; |
| else |
| v &= ~MPIC_GREG_GLOBAL_CONF_1_SIE; |
| mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v); |
| } |
| |
| void mpic_irq_set_priority(unsigned int irq, unsigned int pri) |
| { |
| int is_ipi; |
| struct mpic *mpic = mpic_find(irq, &is_ipi); |
| unsigned long flags; |
| u32 reg; |
| |
| spin_lock_irqsave(&mpic_lock, flags); |
| if (is_ipi) { |
| reg = mpic_ipi_read(irq - mpic->ipi_offset) & |
| ~MPIC_VECPRI_PRIORITY_MASK; |
| mpic_ipi_write(irq - mpic->ipi_offset, |
| reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); |
| } else { |
| reg = mpic_irq_read(irq - mpic->irq_offset,MPIC_IRQ_VECTOR_PRI) |
| & ~MPIC_VECPRI_PRIORITY_MASK; |
| mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI, |
| reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); |
| } |
| spin_unlock_irqrestore(&mpic_lock, flags); |
| } |
| |
| unsigned int mpic_irq_get_priority(unsigned int irq) |
| { |
| int is_ipi; |
| struct mpic *mpic = mpic_find(irq, &is_ipi); |
| unsigned long flags; |
| u32 reg; |
| |
| spin_lock_irqsave(&mpic_lock, flags); |
| if (is_ipi) |
| reg = mpic_ipi_read(irq - mpic->ipi_offset); |
| else |
| reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI); |
| spin_unlock_irqrestore(&mpic_lock, flags); |
| return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT; |
| } |
| |
| void mpic_setup_this_cpu(void) |
| { |
| #ifdef CONFIG_SMP |
| struct mpic *mpic = mpic_primary; |
| unsigned long flags; |
| u32 msk = 1 << hard_smp_processor_id(); |
| unsigned int i; |
| |
| BUG_ON(mpic == NULL); |
| |
| DBG("%s: setup_this_cpu(%d)\n", mpic->name, hard_smp_processor_id()); |
| |
| spin_lock_irqsave(&mpic_lock, flags); |
| |
| /* let the mpic know we want intrs. default affinity is 0xffffffff |
| * until changed via /proc. That's how it's done on x86. If we want |
| * it differently, then we should make sure we also change the default |
| * values of irq_desc[].affinity in irq.c. |
| */ |
| if (distribute_irqs) { |
| for (i = 0; i < mpic->num_sources ; i++) |
| mpic_irq_write(i, MPIC_IRQ_DESTINATION, |
| mpic_irq_read(i, MPIC_IRQ_DESTINATION) | msk); |
| } |
| |
| /* Set current processor priority to 0 */ |
| mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0); |
| |
| spin_unlock_irqrestore(&mpic_lock, flags); |
| #endif /* CONFIG_SMP */ |
| } |
| |
| int mpic_cpu_get_priority(void) |
| { |
| struct mpic *mpic = mpic_primary; |
| |
| return mpic_cpu_read(MPIC_CPU_CURRENT_TASK_PRI); |
| } |
| |
| void mpic_cpu_set_priority(int prio) |
| { |
| struct mpic *mpic = mpic_primary; |
| |
| prio &= MPIC_CPU_TASKPRI_MASK; |
| mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, prio); |
| } |
| |
| /* |
| * XXX: someone who knows mpic should check this. |
| * do we need to eoi the ipi including for kexec cpu here (see xics comments)? |
| * or can we reset the mpic in the new kernel? |
| */ |
| void mpic_teardown_this_cpu(int secondary) |
| { |
| struct mpic *mpic = mpic_primary; |
| unsigned long flags; |
| u32 msk = 1 << hard_smp_processor_id(); |
| unsigned int i; |
| |
| BUG_ON(mpic == NULL); |
| |
| DBG("%s: teardown_this_cpu(%d)\n", mpic->name, hard_smp_processor_id()); |
| spin_lock_irqsave(&mpic_lock, flags); |
| |
| /* let the mpic know we don't want intrs. */ |
| for (i = 0; i < mpic->num_sources ; i++) |
| mpic_irq_write(i, MPIC_IRQ_DESTINATION, |
| mpic_irq_read(i, MPIC_IRQ_DESTINATION) & ~msk); |
| |
| /* Set current processor priority to max */ |
| mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf); |
| |
| spin_unlock_irqrestore(&mpic_lock, flags); |
| } |
| |
| |
| void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask) |
| { |
| struct mpic *mpic = mpic_primary; |
| |
| BUG_ON(mpic == NULL); |
| |
| #ifdef DEBUG_IPI |
| DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no); |
| #endif |
| |
| mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10, |
| mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0])); |
| } |
| |
| int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs) |
| { |
| u32 irq; |
| |
| irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK; |
| #ifdef DEBUG_LOW |
| DBG("%s: get_one_irq(): %d\n", mpic->name, irq); |
| #endif |
| if (mpic->cascade && irq == mpic->cascade_vec) { |
| #ifdef DEBUG_LOW |
| DBG("%s: cascading ...\n", mpic->name); |
| #endif |
| irq = mpic->cascade(regs, mpic->cascade_data); |
| mpic_eoi(mpic); |
| return irq; |
| } |
| if (unlikely(irq == MPIC_VEC_SPURRIOUS)) |
| return -1; |
| if (irq < MPIC_VEC_IPI_0) { |
| #ifdef DEBUG_IRQ |
| DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset); |
| #endif |
| return irq + mpic->irq_offset; |
| } |
| #ifdef DEBUG_IPI |
| DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0); |
| #endif |
| return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset; |
| } |
| |
| int mpic_get_irq(struct pt_regs *regs) |
| { |
| struct mpic *mpic = mpic_primary; |
| |
| BUG_ON(mpic == NULL); |
| |
| return mpic_get_one_irq(mpic, regs); |
| } |
| |
| |
| #ifdef CONFIG_SMP |
| void mpic_request_ipis(void) |
| { |
| struct mpic *mpic = mpic_primary; |
| |
| BUG_ON(mpic == NULL); |
| |
| printk("requesting IPIs ... \n"); |
| |
| /* |
| * IPIs are marked IRQF_DISABLED as they must run with irqs |
| * disabled |
| */ |
| request_irq(mpic->ipi_offset+0, mpic_ipi_action, IRQF_DISABLED, |
| "IPI0 (call function)", mpic); |
| request_irq(mpic->ipi_offset+1, mpic_ipi_action, IRQF_DISABLED, |
| "IPI1 (reschedule)", mpic); |
| request_irq(mpic->ipi_offset+2, mpic_ipi_action, IRQF_DISABLED, |
| "IPI2 (unused)", mpic); |
| request_irq(mpic->ipi_offset+3, mpic_ipi_action, IRQF_DISABLED, |
| "IPI3 (debugger break)", mpic); |
| |
| printk("IPIs requested... \n"); |
| } |
| |
| void smp_mpic_message_pass(int target, int msg) |
| { |
| /* make sure we're sending something that translates to an IPI */ |
| if ((unsigned int)msg > 3) { |
| printk("SMP %d: smp_message_pass: unknown msg %d\n", |
| smp_processor_id(), msg); |
| return; |
| } |
| switch (target) { |
| case MSG_ALL: |
| mpic_send_ipi(msg, 0xffffffff); |
| break; |
| case MSG_ALL_BUT_SELF: |
| mpic_send_ipi(msg, 0xffffffff & ~(1 << smp_processor_id())); |
| break; |
| default: |
| mpic_send_ipi(msg, 1 << target); |
| break; |
| } |
| } |
| #endif /* CONFIG_SMP */ |