diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
new file mode 100644
index 0000000..20a987e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -0,0 +1,136 @@
+* Atmel AT91 Pinmux Controller
+
+The AT91 Pinmux Controler, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are up to
+8 muxing options (called periph modes). Since different modules require
+different PAD settings (like pull up, keeper, etc) the contoller controls
+also the PAD settings parameters.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Atmel AT91 pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and config
+of the pins in that group. The 'pins' selects the function mode(also named pin
+mode) this pin can work on and the 'config' configures various pad settings
+such as pull-up, multi drive, etc.
+
+Required properties for iomux controller:
+- compatible: "atmel,at91rm9200-pinctrl"
+- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
+  configured in this periph mode. All the periph and bank need to be describe.
+
+How to create such array:
+
+Each column will represent the possible peripheral of the pinctrl
+Each line will represent a pio bank
+
+Take an example on the 9260
+Peripheral: 2 ( A and B)
+Bank: 3 (A, B and C)
+=>
+
+  /*    A         B     */
+  0xffffffff 0xffc00c3b  /* pioA */
+  0xffffffff 0x7fff3ccf  /* pioB */
+  0xffffffff 0x007fffff  /* pioC */
+
+For each peripheral/bank we will descibe in a u32 if a pin can can be
+configured in it by putting 1 to the pin bit (1 << pin)
+
+Let's take the pioA on peripheral B
+From the datasheet Table 10-2.
+Peripheral B
+PA0	MCDB0
+PA1	MCCDB
+PA2
+PA3	MCDB3
+PA4	MCDB2
+PA5	MCDB1
+PA6
+PA7
+PA8
+PA9
+PA10	ETX2
+PA11	ETX3
+PA12
+PA13
+PA14
+PA15
+PA16
+PA17
+PA18
+PA19
+PA20
+PA21
+PA22	ETXER
+PA23	ETX2
+PA24	ETX3
+PA25	ERX2
+PA26	ERX3
+PA27	ERXCK
+PA28	ECRS
+PA29	ECOL
+PA30	RXD4
+PA31	TXD4
+
+=> 0xffc00c3b
+
+Required properties for pin configuration node:
+- atmel,pins: 4 integers array, represents a group of pins mux and config
+  setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
+  The PERIPH 0 means gpio.
+
+Bits used for CONFIG:
+PULL_UP(1 << 0): indicate this pin need a pull up.
+MULTIDRIVE(1 << 1): indicate this pin need to be configured as multidrive.
+
+NOTE:
+Some requirements for using atmel,at91rm9200-pinctrl binding:
+1. We have pin function node defined under at91 controller node to represent
+   what pinmux functions this SoC supports.
+2. The driver can use the function node's name and pin configuration node's
+   name describe the pin function and group hierarchy.
+   For example, Linux at91 pinctrl driver takes the function node's name
+   as the function name and pin configuration node's name as group name to
+   create the map table.
+3. Each pin configuration node should have a phandle, devices can set pins
+   configurations by referring to the phandle of that pin configuration node.
+4. The gpio controller must be describe in the pinctrl simple-bus.
+
+Examples:
+
+pinctrl@fffff400 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+	reg = <0xfffff400 0x600>;
+
+	atmel,mux-mask = <
+	      /*    A         B     */
+	       0xffffffff 0xffc00c3b  /* pioA */
+	       0xffffffff 0x7fff3ccf  /* pioB */
+	       0xffffffff 0x007fffff  /* pioC */
+	      >;
+
+	/* shared pinctrl settings */
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins =
+				<1 14 0x1 0x0	/* PB14 periph A */
+				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+		};
+	};
+};
+
+dbgu: serial@fffff200 {
+	compatible = "atmel,at91sam9260-usart";
+	reg = <0xfffff200 0x200>;
+	interrupts = <1 4 7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "disabled";
+};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 431c375..3d7f11f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -329,6 +329,8 @@
 	select IRQ_DOMAIN
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
+	select PINCTRL
+	select PINCTRL_AT91 if USE_OF
 	help
 	  This enables support for systems based on Atmel
 	  AT91RM9200 and AT91SAM9* processors.
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index e8f45c4..3b6a948 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -30,8 +30,6 @@
 static const struct of_device_id irq_of_match[] __initconst = {
 
 	{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
-	{ .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup },
-	{ .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup },
 	{ /*sentinel*/ }
 };
 
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index a34f0ed..c5d7e1e 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -23,8 +23,6 @@
 #include <linux/io.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
 
 #include <asm/mach/irq.h>
 
@@ -717,80 +715,6 @@
  */
 static struct lock_class_key gpio_lock_class;
 
-#if defined(CONFIG_OF)
-static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	struct at91_gpio_chip	*at91_gpio = h->host_data;
-
-	irq_set_lockdep_class(virq, &gpio_lock_class);
-
-	/*
-	 * Can use the "simple" and not "edge" handler since it's
-	 * shorter, and the AIC handles interrupts sanely.
-	 */
-	irq_set_chip_and_handler(virq, &gpio_irqchip,
-				 handle_simple_irq);
-	set_irq_flags(virq, IRQF_VALID);
-	irq_set_chip_data(virq, at91_gpio);
-
-	return 0;
-}
-
-static struct irq_domain_ops at91_gpio_ops = {
-	.map	= at91_gpio_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-int __init at91_gpio_of_irq_setup(struct device_node *node,
-				     struct device_node *parent)
-{
-	struct at91_gpio_chip	*prev = NULL;
-	int			alias_idx = of_alias_get_id(node, "gpio");
-	struct at91_gpio_chip	*at91_gpio = &gpio_chip[alias_idx];
-
-	/* Setup proper .irq_set_type function */
-	if (has_pio3())
-		gpio_irqchip.irq_set_type = alt_gpio_irq_type;
-	else
-		gpio_irqchip.irq_set_type = gpio_irq_type;
-
-	/* Disable irqs of this PIO controller */
-	__raw_writel(~0, at91_gpio->regbase + PIO_IDR);
-
-	/* Setup irq domain */
-	at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio,
-						&at91_gpio_ops, at91_gpio);
-	if (!at91_gpio->domain)
-		panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n",
-			at91_gpio->pioc_idx);
-
-	/* Setup chained handler */
-	if (at91_gpio->pioc_idx)
-		prev = &gpio_chip[at91_gpio->pioc_idx - 1];
-
-	/* The toplevel handler handles one bank of GPIOs, except
-	 * on some SoC it can handles up to three...
-	 * We only set up the handler for the first of the list.
-	 */
-	if (prev && prev->next == at91_gpio)
-		return 0;
-
-	at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent),
-							at91_gpio->pioc_hwirq);
-	irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio);
-	irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler);
-
-	return 0;
-}
-#else
-int __init at91_gpio_of_irq_setup(struct device_node *node,
-				     struct device_node *parent)
-{
-	return -EINVAL;
-}
-#endif
-
 /*
  * irqdomain initialization: pile up irqdomains on top of AIC range
  */
@@ -989,85 +913,6 @@
 	return -EINVAL;
 }
 
-#ifdef CONFIG_OF_GPIO
-static void __init of_at91_gpio_init_one(struct device_node *np)
-{
-	int alias_idx;
-	struct at91_gpio_chip *at91_gpio;
-	uint32_t ngpio;
-
-	if (!np)
-		return;
-
-	alias_idx = of_alias_get_id(np, "gpio");
-	if (alias_idx >= MAX_GPIO_BANKS) {
-		pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n",
-						alias_idx, MAX_GPIO_BANKS);
-		return;
-	}
-
-	at91_gpio = &gpio_chip[alias_idx];
-	at91_gpio->chip.base = alias_idx * MAX_NB_GPIO_PER_BANK;
-
-	at91_gpio->regbase = of_iomap(np, 0);
-	if (!at91_gpio->regbase) {
-		pr_err("at91_gpio.%d, failed to map registers, ignoring.\n",
-								alias_idx);
-		return;
-	}
-
-	/* Get the interrupts property */
-	if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) {
-		pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n",
-								alias_idx);
-		goto ioremap_err;
-	}
-
-	/* Get capabilities from compatibility property */
-	if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio"))
-		at91_gpio_caps |= AT91_GPIO_CAP_PIO3;
-
-	if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) {
-		if (ngpio >= MAX_NB_GPIO_PER_BANK)
-			pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n",
-			       alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK);
-		else
-			at91_gpio->chip.ngpio = ngpio;
-	}
-
-	/* Setup clock */
-	if (at91_gpio_setup_clk(alias_idx))
-		goto ioremap_err;
-
-	at91_gpio->chip.of_node = np;
-	gpio_banks = max(gpio_banks, alias_idx + 1);
-	at91_gpio->pioc_idx = alias_idx;
-	return;
-
-ioremap_err:
-	iounmap(at91_gpio->regbase);
-}
-
-static int __init of_at91_gpio_init(void)
-{
-	struct device_node *np = NULL;
-
-	/*
-	 * This isn't ideal, but it gets things hooked up until this
-	 * driver is converted into a platform_device
-	 */
-	for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio")
-		of_at91_gpio_init_one(np);
-
-	return gpio_banks > 0 ? 0 : -EINVAL;
-}
-#else
-static int __init of_at91_gpio_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
 static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
 {
 	struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
@@ -1102,11 +947,11 @@
 
 	BUG_ON(nr_banks > MAX_GPIO_BANKS);
 
-	if (of_at91_gpio_init() < 0) {
-		/* No GPIO controller found in device tree */
-		for (i = 0; i < nr_banks; i++)
-			at91_gpio_init_one(i, data[i].regbase, data[i].id);
-	}
+	if (of_have_populated_dt())
+		return;
+
+	for (i = 0; i < nr_banks; i++)
+		at91_gpio_init_one(i, data[i].regbase, data[i].id);
 
 	for (i = 0; i < gpio_banks; i++) {
 		at91_gpio = &gpio_chip[i];
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 7bf914d..4787f0e 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -26,6 +26,15 @@
 	help
 	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.
 
+config PINCTRL_AT91
+	bool "AT91 pinctrl driver"
+	depends on OF
+	depends on ARCH_AT91
+	select PINMUX
+	select PINCONF
+	help
+	  Say Y here to enable the at91 pinctrl driver
+
 config PINCTRL_BCM2835
 	bool
 	select PINMUX
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f395ba5..78a191c 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -9,6 +9,7 @@
 obj-$(CONFIG_PINCTRL)		+= devicetree.o
 endif
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
+obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
 obj-$(CONFIG_PINCTRL_IMX35)	+= pinctrl-imx35.o
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
new file mode 100644
index 0000000..01bf924
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -0,0 +1,1490 @@
+/*
+ * at91 pinctrl driver based on at91 pinmux core
+ *
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+/* Since we request GPIOs from ourself */
+#include <linux/pinctrl/consumer.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/at91_pio.h>
+
+#include "core.h"
+
+#define MAX_NB_GPIO_PER_BANK	32
+
+struct at91_pinctrl_mux_ops;
+
+struct at91_gpio_chip {
+	struct gpio_chip	chip;
+	struct pinctrl_gpio_range range;
+	struct at91_gpio_chip	*next;		/* Bank sharing same clock */
+	int			pioc_hwirq;	/* PIO bank interrupt identifier on AIC */
+	int			pioc_virq;	/* PIO bank Linux virtual interrupt */
+	int			pioc_idx;	/* PIO bank index */
+	void __iomem		*regbase;	/* PIO bank virtual address */
+	struct clk		*clock;		/* associated clock */
+	struct irq_domain	*domain;	/* associated irq domain */
+	struct at91_pinctrl_mux_ops *ops;	/* ops */
+};
+
+#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
+
+static struct at91_gpio_chip *gpio_chips[MAX_GPIO_BANKS];
+
+static int gpio_banks;
+
+#define PULL_UP		(0 << 1)
+#define MULTI_DRIVE	(1 << 1)
+
+/**
+ * struct at91_pmx_func - describes AT91 pinmux functions
+ * @name: the name of this specific function
+ * @groups: corresponding pin groups
+ * @ngroups: the number of groups
+ */
+struct at91_pmx_func {
+	const char	*name;
+	const char	**groups;
+	unsigned	ngroups;
+};
+
+enum at91_mux {
+	AT91_MUX_GPIO = 0,
+	AT91_MUX_PERIPH_A = 1,
+	AT91_MUX_PERIPH_B = 2,
+	AT91_MUX_PERIPH_C = 3,
+	AT91_MUX_PERIPH_D = 4,
+};
+
+/**
+ * struct at91_pmx_pin - describes an At91 pin mux
+ * @bank: the bank of the pin
+ * @pin: the pin number in the @bank
+ * @mux: the mux mode : gpio or periph_x of the pin i.e. alternate function.
+ * @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc...
+ */
+struct at91_pmx_pin {
+	uint32_t	bank;
+	uint32_t	pin;
+	enum at91_mux	mux;
+	unsigned long	conf;
+};
+
+/**
+ * struct at91_pin_group - describes an At91 pin group
+ * @name: the name of this specific pin group
+ * @pins_conf: the mux mode for each pin in this group. The size of this
+ *	array is the same as pins.
+ * @pins: an array of discrete physical pins used in this group, taken
+ *	from the driver-local pin enumeration space
+ * @npins: the number of pins in this group array, i.e. the number of
+ *	elements in .pins so we can iterate over that array
+ */
+struct at91_pin_group {
+	const char		*name;
+	struct at91_pmx_pin	*pins_conf;
+	unsigned int		*pins;
+	unsigned		npins;
+};
+
+/**
+ * struct at91_pinctrl_mux_ops - describes an At91 mux ops group
+ * on new IP with support for periph C and D the way to mux in
+ * periph A and B has changed
+ * So provide the right call back
+ * if not present means the IP does not support it
+ * @get_periph: return the periph mode configured
+ * @mux_A_periph: mux as periph A
+ * @mux_B_periph: mux as periph B
+ * @mux_C_periph: mux as periph C
+ * @mux_D_periph: mux as periph D
+ * @irq_type: return irq type
+ */
+struct at91_pinctrl_mux_ops {
+	enum at91_mux (*get_periph)(void __iomem *pio, unsigned mask);
+	void (*mux_A_periph)(void __iomem *pio, unsigned mask);
+	void (*mux_B_periph)(void __iomem *pio, unsigned mask);
+	void (*mux_C_periph)(void __iomem *pio, unsigned mask);
+	void (*mux_D_periph)(void __iomem *pio, unsigned mask);
+	/* irq */
+	int (*irq_type)(struct irq_data *d, unsigned type);
+};
+
+static int gpio_irq_type(struct irq_data *d, unsigned type);
+static int alt_gpio_irq_type(struct irq_data *d, unsigned type);
+
+struct at91_pinctrl {
+	struct device		*dev;
+	struct pinctrl_dev	*pctl;
+
+	int			nbanks;
+
+	uint32_t		*mux_mask;
+	int			nmux;
+
+	struct at91_pmx_func	*functions;
+	int			nfunctions;
+
+	struct at91_pin_group	*groups;
+	int			ngroups;
+
+	struct at91_pinctrl_mux_ops *ops;
+};
+
+static const inline struct at91_pin_group *at91_pinctrl_find_group_by_name(
+				const struct at91_pinctrl *info,
+				const char *name)
+{
+	const struct at91_pin_group *grp = NULL;
+	int i;
+
+	for (i = 0; i < info->ngroups; i++) {
+		if (strcmp(info->groups[i].name, name))
+			continue;
+
+		grp = &info->groups[i];
+		dev_dbg(info->dev, "%s: %d 0:%d\n", name, grp->npins, grp->pins[0]);
+		break;
+	}
+
+	return grp;
+}
+
+static int at91_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->ngroups;
+}
+
+static const char *at91_get_group_name(struct pinctrl_dev *pctldev,
+				       unsigned selector)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->groups[selector].name;
+}
+
+static int at91_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
+			       const unsigned **pins,
+			       unsigned *npins)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	if (selector >= info->ngroups)
+		return -EINVAL;
+
+	*pins = info->groups[selector].pins;
+	*npins = info->groups[selector].npins;
+
+	return 0;
+}
+
+static void at91_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+		   unsigned offset)
+{
+	seq_printf(s, "%s", dev_name(pctldev->dev));
+}
+
+static int at91_dt_node_to_map(struct pinctrl_dev *pctldev,
+			struct device_node *np,
+			struct pinctrl_map **map, unsigned *num_maps)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	const struct at91_pin_group *grp;
+	struct pinctrl_map *new_map;
+	struct device_node *parent;
+	int map_num = 1;
+	int i;
+	struct at91_pmx_pin *pin;
+
+	/*
+	 * first find the group of this node and check if we need create
+	 * config maps for pins
+	 */
+	grp = at91_pinctrl_find_group_by_name(info, np->name);
+	if (!grp) {
+		dev_err(info->dev, "unable to find group for node %s\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	map_num += grp->npins;
+	new_map = devm_kzalloc(pctldev->dev, sizeof(*new_map) * map_num, GFP_KERNEL);
+	if (!new_map)
+		return -ENOMEM;
+
+	*map = new_map;
+	*num_maps = map_num;
+
+	/* create mux map */
+	parent = of_get_parent(np);
+	if (!parent) {
+		kfree(new_map);
+		return -EINVAL;
+	}
+	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
+	new_map[0].data.mux.function = parent->name;
+	new_map[0].data.mux.group = np->name;
+	of_node_put(parent);
+
+	/* create config map */
+	new_map++;
+	for (i = 0; i < grp->npins; i++) {
+		pin = &grp->pins_conf[i];
+
+		new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
+		new_map[i].data.configs.group_or_pin =
+				pin_get_name(pctldev, grp->pins[i]);
+		new_map[i].data.configs.configs = &grp->pins_conf[i].conf;
+		new_map[i].data.configs.num_configs = 1;
+	}
+
+	dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
+		(*map)->data.mux.function, (*map)->data.mux.group, map_num);
+
+	return 0;
+}
+
+static void at91_dt_free_map(struct pinctrl_dev *pctldev,
+				struct pinctrl_map *map, unsigned num_maps)
+{
+}
+
+static struct pinctrl_ops at91_pctrl_ops = {
+	.get_groups_count	= at91_get_groups_count,
+	.get_group_name		= at91_get_group_name,
+	.get_group_pins		= at91_get_group_pins,
+	.pin_dbg_show		= at91_pin_dbg_show,
+	.dt_node_to_map		= at91_dt_node_to_map,
+	.dt_free_map		= at91_dt_free_map,
+};
+
+static void __iomem * pin_to_controller(struct at91_pinctrl *info,
+				 unsigned int bank)
+{
+	return gpio_chips[bank]->regbase;
+}
+
+static inline int pin_to_bank(unsigned pin)
+{
+	return pin /= MAX_NB_GPIO_PER_BANK;
+}
+
+static unsigned pin_to_mask(unsigned int pin)
+{
+	return 1 << pin;
+}
+
+static void at91_mux_disable_interrupt(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(mask, pio + PIO_IDR);
+}
+
+static unsigned at91_mux_get_pullup(void __iomem *pio, unsigned pin)
+{
+	return (readl_relaxed(pio + PIO_PUSR) >> pin) & 0x1;
+}
+
+static void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
+{
+	writel_relaxed(mask, pio + (on ? PIO_PUER : PIO_PUDR));
+}
+
+static unsigned at91_mux_get_multidrive(void __iomem *pio, unsigned pin)
+{
+	return (readl_relaxed(pio + PIO_MDSR) >> pin) & 0x1;
+}
+
+static void at91_mux_set_multidrive(void __iomem *pio, unsigned mask, bool on)
+{
+	writel_relaxed(mask, pio + (on ? PIO_MDER : PIO_MDDR));
+}
+
+static void at91_mux_set_A_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(mask, pio + PIO_ASR);
+}
+
+static void at91_mux_set_B_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(mask, pio + PIO_BSR);
+}
+
+static void at91_mux_pio3_set_A_periph(void __iomem *pio, unsigned mask)
+{
+
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) & ~mask,
+						pio + PIO_ABCDSR1);
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) & ~mask,
+						pio + PIO_ABCDSR2);
+}
+
+static void at91_mux_pio3_set_B_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) | mask,
+						pio + PIO_ABCDSR1);
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) & ~mask,
+						pio + PIO_ABCDSR2);
+}
+
+static void at91_mux_pio3_set_C_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
+}
+
+static void at91_mux_pio3_set_D_periph(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
+	writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
+}
+
+static enum at91_mux at91_mux_pio3_get_periph(void __iomem *pio, unsigned mask)
+{
+	unsigned select;
+
+	if (readl_relaxed(pio + PIO_PSR) & mask)
+		return AT91_MUX_GPIO;
+
+	select = !!(readl_relaxed(pio + PIO_ABCDSR1) & mask);
+	select |= (!!(readl_relaxed(pio + PIO_ABCDSR2) & mask) << 1);
+
+	return select + 1;
+}
+
+static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask)
+{
+	unsigned select;
+
+	if (readl_relaxed(pio + PIO_PSR) & mask)
+		return AT91_MUX_GPIO;
+
+	select = readl_relaxed(pio + PIO_ABSR) & mask;
+
+	return select + 1;
+}
+
+static struct at91_pinctrl_mux_ops at91rm9200_ops = {
+	.get_periph	= at91_mux_get_periph,
+	.mux_A_periph	= at91_mux_set_A_periph,
+	.mux_B_periph	= at91_mux_set_B_periph,
+	.irq_type	= gpio_irq_type,
+};
+
+static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
+	.get_periph	= at91_mux_pio3_get_periph,
+	.mux_A_periph	= at91_mux_pio3_set_A_periph,
+	.mux_B_periph	= at91_mux_pio3_set_B_periph,
+	.mux_C_periph	= at91_mux_pio3_set_C_periph,
+	.mux_D_periph	= at91_mux_pio3_set_D_periph,
+	.irq_type	= alt_gpio_irq_type,
+};
+
+static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin)
+{
+	if (pin->mux) {
+		dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lu\n",
+			pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf);
+	} else {
+		dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lu\n",
+			pin->bank + 'A', pin->pin, pin->conf);
+	}
+}
+
+static int pin_check_config(struct at91_pinctrl *info, const char* name,
+			    int index, const struct at91_pmx_pin *pin)
+{
+	int mux;
+
+	/* check if it's a valid config */
+	if (pin->bank >= info->nbanks) {
+		dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n",
+			name, index, pin->bank, info->nbanks);
+		return -EINVAL;
+	}
+
+	if (pin->pin >= MAX_NB_GPIO_PER_BANK) {
+		dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n",
+			name, index, pin->pin, MAX_NB_GPIO_PER_BANK);
+		return -EINVAL;
+	}
+
+	if (!pin->mux)
+		return 0;
+
+	mux = pin->mux - 1;
+
+	if (mux >= info->nmux) {
+		dev_err(info->dev, "%s: pin conf %d mux_id %d >= nmux %d\n",
+			name, index, mux, info->nmux);
+		return -EINVAL;
+	}
+
+	if (!(info->mux_mask[pin->bank * info->nmux + mux] & 1 << pin->pin)) {
+		dev_err(info->dev, "%s: pin conf %d mux_id %d not supported for pio%c%d\n",
+			name, index, mux, pin->bank + 'A', pin->pin);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void at91_mux_gpio_disable(void __iomem *pio, unsigned mask)
+{
+	writel_relaxed(mask, pio + PIO_PDR);
+}
+
+static void at91_mux_gpio_enable(void __iomem *pio, unsigned mask, bool input)
+{
+	writel_relaxed(mask, pio + PIO_PER);
+	writel_relaxed(mask, pio + (input ? PIO_ODR : PIO_OER));
+}
+
+static int at91_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
+			   unsigned group)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	const struct at91_pmx_pin *pins_conf = info->groups[group].pins_conf;
+	const struct at91_pmx_pin *pin;
+	uint32_t npins = info->groups[group].npins;
+	int i, ret;
+	unsigned mask;
+	void __iomem *pio;
+
+	dev_dbg(info->dev, "enable function %s group %s\n",
+		info->functions[selector].name, info->groups[group].name);
+
+	/* first check that all the pins of the group are valid with a valid
+	 * paramter */
+	for (i = 0; i < npins; i++) {
+		pin = &pins_conf[i];
+		ret = pin_check_config(info, info->groups[group].name, i, pin);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < npins; i++) {
+		pin = &pins_conf[i];
+		at91_pin_dbg(info->dev, pin);
+		pio = pin_to_controller(info, pin->bank);
+		mask = pin_to_mask(pin->pin);
+		at91_mux_disable_interrupt(pio, mask);
+		switch(pin->mux) {
+		case AT91_MUX_GPIO:
+			at91_mux_gpio_enable(pio, mask, 1);
+			break;
+		case AT91_MUX_PERIPH_A:
+			info->ops->mux_A_periph(pio, mask);
+			break;
+		case AT91_MUX_PERIPH_B:
+			info->ops->mux_B_periph(pio, mask);
+			break;
+		case AT91_MUX_PERIPH_C:
+			if (!info->ops->mux_C_periph)
+				return -EINVAL;
+			info->ops->mux_C_periph(pio, mask);
+			break;
+		case AT91_MUX_PERIPH_D:
+			if (!info->ops->mux_D_periph)
+				return -EINVAL;
+			info->ops->mux_D_periph(pio, mask);
+			break;
+		}
+		if (pin->mux)
+			at91_mux_gpio_disable(pio, mask);
+	}
+
+	return 0;
+}
+
+static void at91_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector,
+			   unsigned group)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	const struct at91_pmx_pin *pins_conf = info->groups[group].pins_conf;
+	const struct at91_pmx_pin *pin;
+	uint32_t npins = info->groups[group].npins;
+	int i;
+	unsigned mask;
+	void __iomem *pio;
+
+	for (i = 0; i < npins; i++) {
+		pin = &pins_conf[i];
+		at91_pin_dbg(info->dev, pin);
+		pio = pin_to_controller(info, pin->bank);
+		mask = pin_to_mask(pin->pin);
+		at91_mux_gpio_enable(pio, mask, 1);
+	}
+}
+
+static int at91_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->nfunctions;
+}
+
+static const char *at91_pmx_get_func_name(struct pinctrl_dev *pctldev,
+					  unsigned selector)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	return info->functions[selector].name;
+}
+
+static int at91_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
+			       const char * const **groups,
+			       unsigned * const num_groups)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = info->functions[selector].groups;
+	*num_groups = info->functions[selector].ngroups;
+
+	return 0;
+}
+
+int at91_gpio_request_enable(struct pinctrl_dev *pctldev,
+			    struct pinctrl_gpio_range *range,
+			    unsigned offset)
+{
+	struct at91_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+	struct at91_gpio_chip *at91_chip;
+	struct gpio_chip *chip;
+	unsigned mask;
+
+	if (!range) {
+		dev_err(npct->dev, "invalid range\n");
+		return -EINVAL;
+	}
+	if (!range->gc) {
+		dev_err(npct->dev, "missing GPIO chip in range\n");
+		return -EINVAL;
+	}
+	chip = range->gc;
+	at91_chip = container_of(chip, struct at91_gpio_chip, chip);
+
+	dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
+
+	mask = 1 << (offset - chip->base);
+
+	dev_dbg(npct->dev, "enable pin %u as PIO%c%d 0x%x\n",
+		offset, 'A' + range->id, offset - chip->base, mask);
+
+	writel_relaxed(mask, at91_chip->regbase + PIO_PER);
+
+	return 0;
+}
+
+void at91_gpio_disable_free(struct pinctrl_dev *pctldev,
+			   struct pinctrl_gpio_range *range,
+			   unsigned offset)
+{
+	struct at91_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+
+	dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset);
+	/* Set the pin to some default state, GPIO is usually default */
+}
+
+static struct pinmux_ops at91_pmx_ops = {
+	.get_functions_count	= at91_pmx_get_funcs_count,
+	.get_function_name	= at91_pmx_get_func_name,
+	.get_function_groups	= at91_pmx_get_groups,
+	.enable			= at91_pmx_enable,
+	.disable		= at91_pmx_disable,
+	.gpio_request_enable	= at91_gpio_request_enable,
+	.gpio_disable_free	= at91_gpio_disable_free,
+};
+
+static int at91_pinconf_get(struct pinctrl_dev *pctldev,
+			     unsigned pin_id, unsigned long *config)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	void __iomem *pio;
+	unsigned pin;
+
+	dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, *config);
+	pio = pin_to_controller(info, pin_to_bank(pin_id));
+	pin = pin_id % MAX_NB_GPIO_PER_BANK;
+
+	if (at91_mux_get_multidrive(pio, pin))
+		*config |= MULTI_DRIVE;
+
+	if (at91_mux_get_pullup(pio, pin))
+		*config |= PULL_UP;
+
+	return 0;
+}
+
+static int at91_pinconf_set(struct pinctrl_dev *pctldev,
+			     unsigned pin_id, unsigned long config)
+{
+	struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
+	unsigned mask;
+	void __iomem *pio;
+
+	dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, config);
+	pio = pin_to_controller(info, pin_to_bank(pin_id));
+	mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK);
+
+	at91_mux_set_pullup(pio, mask, config & PULL_UP);
+	at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
+	return 0;
+}
+
+static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+				   struct seq_file *s, unsigned pin_id)
+{
+
+}
+
+static void at91_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+					 struct seq_file *s, unsigned group)
+{
+}
+
+struct pinconf_ops at91_pinconf_ops = {
+	.pin_config_get			= at91_pinconf_get,
+	.pin_config_set			= at91_pinconf_set,
+	.pin_config_dbg_show		= at91_pinconf_dbg_show,
+	.pin_config_group_dbg_show	= at91_pinconf_group_dbg_show,
+};
+
+static struct pinctrl_desc at91_pinctrl_desc = {
+	.pctlops	= &at91_pctrl_ops,
+	.pmxops		= &at91_pmx_ops,
+	.confops	= &at91_pinconf_ops,
+	.owner		= THIS_MODULE,
+};
+
+static const char *gpio_compat = "atmel,at91rm9200-gpio";
+
+static void __devinit at91_pinctrl_child_count(struct at91_pinctrl *info,
+					      struct device_node *np)
+{
+	struct device_node *child;
+
+	for_each_child_of_node(np, child) {
+		if (of_device_is_compatible(child, gpio_compat)) {
+			info->nbanks++;
+		} else {
+			info->nfunctions++;
+			info->ngroups += of_get_child_count(child);
+		}
+	}
+}
+
+static int __devinit at91_pinctrl_mux_mask(struct at91_pinctrl *info,
+					  struct device_node *np)
+{
+	int ret = 0;
+	int size;
+	const const __be32 *list;
+
+	list = of_get_property(np, "atmel,mux-mask", &size);
+	if (!list) {
+		dev_err(info->dev, "can not read the mux-mask of %d\n", size);
+		return -EINVAL;
+	}
+
+	size /= sizeof(*list);
+	if (!size || size % info->nbanks) {
+		dev_err(info->dev, "wrong mux mask array should be by %d\n", info->nbanks);
+		return -EINVAL;
+	}
+	info->nmux = size / info->nbanks;
+
+	info->mux_mask = devm_kzalloc(info->dev, sizeof(u32) * size, GFP_KERNEL);
+	if (!info->mux_mask) {
+		dev_err(info->dev, "could not alloc mux_mask\n");
+		return -ENOMEM;
+	}
+
+	ret = of_property_read_u32_array(np, "atmel,mux-mask",
+					  info->mux_mask, size);
+	if (ret)
+		dev_err(info->dev, "can not read the mux-mask of %d\n", size);
+	return ret;
+}
+
+static int __devinit at91_pinctrl_parse_groups(struct device_node *np,
+				struct at91_pin_group *grp,
+				struct at91_pinctrl *info,
+				u32 index)
+{
+	struct at91_pmx_pin *pin;
+	int size;
+	const const __be32 *list;
+	int i, j;
+
+	dev_dbg(info->dev, "group(%d): %s\n", index, np->name);
+
+	/* Initialise group */
+	grp->name = np->name;
+
+	/*
+	 * the binding format is atmel,pins = <bank pin mux CONFIG ...>,
+	 * do sanity check and calculate pins number
+	 */
+	list = of_get_property(np, "atmel,pins", &size);
+	/* we do not check return since it's safe node passed down */
+	size /= sizeof(*list);
+	if (!size || size % 4) {
+		dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n");
+		return -EINVAL;
+	}
+
+	grp->npins = size / 4;
+	pin = grp->pins_conf = devm_kzalloc(info->dev, grp->npins * sizeof(struct at91_pmx_pin),
+				GFP_KERNEL);
+	grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
+				GFP_KERNEL);
+	if (!grp->pins_conf || !grp->pins)
+		return -ENOMEM;
+
+	for (i = 0, j = 0; i < size; i += 4, j++) {
+		pin->bank = be32_to_cpu(*list++);
+		pin->pin = be32_to_cpu(*list++);
+		grp->pins[j] = pin->bank * MAX_NB_GPIO_PER_BANK + pin->pin;
+		pin->mux = be32_to_cpu(*list++);
+		pin->conf = be32_to_cpu(*list++);
+
+		at91_pin_dbg(info->dev, pin);
+		pin++;
+	}
+
+	return 0;
+}
+
+static int __devinit at91_pinctrl_parse_functions(struct device_node *np,
+			struct at91_pinctrl *info, u32 index)
+{
+	struct device_node *child;
+	struct at91_pmx_func *func;
+	struct at91_pin_group *grp;
+	int ret;
+	static u32 grp_index;
+	u32 i = 0;
+
+	dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name);
+
+	func = &info->functions[index];
+
+	/* Initialise function */
+	func->name = np->name;
+	func->ngroups = of_get_child_count(np);
+	if (func->ngroups <= 0) {
+		dev_err(info->dev, "no groups defined\n");
+		return -EINVAL;
+	}
+	func->groups = devm_kzalloc(info->dev,
+			func->ngroups * sizeof(char *), GFP_KERNEL);
+	if (!func->groups)
+		return -ENOMEM;
+
+	for_each_child_of_node(np, child) {
+		func->groups[i] = child->name;
+		grp = &info->groups[grp_index++];
+		ret = at91_pinctrl_parse_groups(child, grp, info, i++);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct of_device_id at91_pinctrl_of_match[] __devinitdata = {
+	{ .compatible = "atmel,at91sam9x5-pinctrl", .data = &at91sam9x5_ops },
+	{ .compatible = "atmel,at91rm9200-pinctrl", .data = &at91rm9200_ops },
+	{ /* sentinel */ }
+};
+
+static int __devinit at91_pinctrl_probe_dt(struct platform_device *pdev,
+					   struct at91_pinctrl *info)
+{
+	int ret = 0;
+	int i, j;
+	uint32_t *tmp;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *child;
+
+	if (!np)
+		return -ENODEV;
+
+	info->dev = &pdev->dev;
+	info->ops =
+		of_match_device(at91_pinctrl_of_match, &pdev->dev)->data;
+	at91_pinctrl_child_count(info, np);
+
+	if (info->nbanks < 1) {
+		dev_err(&pdev->dev, "you need to specify atleast one gpio-controller\n");
+		return -EINVAL;
+	}
+
+	ret = at91_pinctrl_mux_mask(info, np);
+	if (ret)
+		return ret;
+
+	dev_dbg(&pdev->dev, "nmux = %d\n", info->nmux);
+
+	dev_dbg(&pdev->dev, "mux-mask\n");
+	tmp = info->mux_mask;
+	for (i = 0; i < info->nbanks; i++) {
+		for (j = 0; j < info->nmux; j++, tmp++) {
+			dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]);
+		}
+	}
+
+	dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
+	dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
+	info->functions = devm_kzalloc(&pdev->dev, info->nfunctions * sizeof(struct at91_pmx_func),
+					GFP_KERNEL);
+	if (!info->functions)
+		return -ENOMEM;
+
+	info->groups = devm_kzalloc(&pdev->dev, info->ngroups * sizeof(struct at91_pin_group),
+					GFP_KERNEL);
+	if (!info->groups)
+		return -ENOMEM;
+
+	dev_dbg(&pdev->dev, "nbanks = %d\n", info->nbanks);
+	dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
+	dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
+
+	i = 0;
+
+	for_each_child_of_node(np, child) {
+		if (of_device_is_compatible(child, gpio_compat))
+			continue;
+		ret = at91_pinctrl_parse_functions(child, info, i++);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to parse function\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int __devinit at91_pinctrl_probe(struct platform_device *pdev)
+{
+	struct at91_pinctrl *info;
+	struct pinctrl_pin_desc *pdesc;
+	int ret, i, j ,k;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	ret = at91_pinctrl_probe_dt(pdev, info);
+	if (ret)
+		return ret;
+
+	/*
+	 * We need all the GPIO drivers to probe FIRST, or we will not be able
+	 * to obtain references to the struct gpio_chip * for them, and we
+	 * need this to proceed.
+	 */
+	for (i = 0; i < info->nbanks; i++) {
+		if (!gpio_chips[i]) {
+			dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
+			devm_kfree(&pdev->dev, info);
+			return -EPROBE_DEFER;
+		}
+	}
+
+	at91_pinctrl_desc.name = dev_name(&pdev->dev);
+	at91_pinctrl_desc.npins = info->nbanks * MAX_NB_GPIO_PER_BANK;
+	at91_pinctrl_desc.pins = pdesc =
+		devm_kzalloc(&pdev->dev, sizeof(*pdesc) * at91_pinctrl_desc.npins, GFP_KERNEL);
+
+	if (!at91_pinctrl_desc.pins)
+		return -ENOMEM;
+
+	for (i = 0 , k = 0; i < info->nbanks; i++) {
+		for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) {
+			pdesc->number = k;
+			pdesc->name = kasprintf(GFP_KERNEL, "pio%c%d", i + 'A', j);
+			pdesc++;
+		}
+	}
+
+	platform_set_drvdata(pdev, info);
+	info->pctl = pinctrl_register(&at91_pinctrl_desc, &pdev->dev, info);
+
+	if (!info->pctl) {
+		dev_err(&pdev->dev, "could not register AT91 pinctrl driver\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* We will handle a range of GPIO pins */
+	for (i = 0; i < info->nbanks; i++)
+		pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
+
+	dev_info(&pdev->dev, "initialized AT91 pinctrl driver\n");
+
+	return 0;
+
+err:
+	return ret;
+}
+
+int __devexit at91_pinctrl_remove(struct platform_device *pdev)
+{
+	struct at91_pinctrl *info = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(info->pctl);
+
+	return 0;
+}
+
+static int at91_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	/*
+	 * Map back to global GPIO space and request muxing, the direction
+	 * parameter does not matter for this controller.
+	 */
+	int gpio = chip->base + offset;
+	int bank = chip->base / chip->ngpio;
+
+	dev_dbg(chip->dev, "%s:%d pio%c%d(%d)\n", __func__, __LINE__,
+		 'A' + bank, offset, gpio);
+
+	return pinctrl_request_gpio(gpio);
+}
+
+static void at91_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	int gpio = chip->base + offset;
+
+	pinctrl_free_gpio(gpio);
+}
+
+static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	writel_relaxed(mask, pio + PIO_ODR);
+	return 0;
+}
+
+static int at91_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+	u32 pdsr;
+
+	pdsr = readl_relaxed(pio + PIO_PDSR);
+	return (pdsr & mask) != 0;
+}
+
+static void at91_gpio_set(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
+}
+
+static int at91_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
+	writel_relaxed(mask, pio + PIO_OER);
+
+	return 0;
+}
+
+static int at91_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	int virq;
+
+	if (offset < chip->ngpio)
+		virq = irq_create_mapping(at91_gpio->domain, offset);
+	else
+		virq = -ENXIO;
+
+	dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
+				chip->label, offset + chip->base, virq);
+	return virq;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void at91_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	enum at91_mux mode;
+	int i;
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		unsigned pin = chip->base + i;
+		unsigned mask = pin_to_mask(pin);
+		const char *gpio_label;
+		u32 pdsr;
+
+		gpio_label = gpiochip_is_requested(chip, i);
+		if (!gpio_label)
+			continue;
+		mode = at91_gpio->ops->get_periph(pio, mask);
+		seq_printf(s, "[%s] GPIO%s%d: ",
+			   gpio_label, chip->label, i);
+		if (mode == AT91_MUX_GPIO) {
+			pdsr = readl_relaxed(pio + PIO_PDSR);
+
+			seq_printf(s, "[gpio] %s\n",
+				   pdsr & mask ?
+				   "set" : "clear");
+		} else {
+			seq_printf(s, "[periph %c]\n",
+				   mode + 'A' - 1);
+		}
+	}
+}
+#else
+#define at91_gpio_dbg_show	NULL
+#endif
+
+/* Several AIC controller irqs are dispatched through this GPIO handler.
+ * To use any AT91_PIN_* as an externally triggered IRQ, first call
+ * at91_set_gpio_input() then maybe enable its glitch filter.
+ * Then just request_irq() with the pin ID; it works like any ARM IRQ
+ * handler.
+ * First implementation always triggers on rising and falling edges
+ * whereas the newer PIO3 can be additionally configured to trigger on
+ * level, edge with any polarity.
+ *
+ * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
+ * configuring them with at91_set_a_periph() or at91_set_b_periph().
+ * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
+ */
+
+static void gpio_irq_mask(struct irq_data *d)
+{
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+	void __iomem	*pio = at91_gpio->regbase;
+	unsigned	mask = 1 << d->hwirq;
+
+	if (pio)
+		writel_relaxed(mask, pio + PIO_IDR);
+}
+
+static void gpio_irq_unmask(struct irq_data *d)
+{
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+	void __iomem	*pio = at91_gpio->regbase;
+	unsigned	mask = 1 << d->hwirq;
+
+	if (pio)
+		writel_relaxed(mask, pio + PIO_IER);
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned type)
+{
+	switch (type) {
+	case IRQ_TYPE_NONE:
+	case IRQ_TYPE_EDGE_BOTH:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Alternate irq type for PIO3 support */
+static int alt_gpio_irq_type(struct irq_data *d, unsigned type)
+{
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+	void __iomem	*pio = at91_gpio->regbase;
+	unsigned	mask = 1 << d->hwirq;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		writel_relaxed(mask, pio + PIO_ESR);
+		writel_relaxed(mask, pio + PIO_REHLSR);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		writel_relaxed(mask, pio + PIO_ESR);
+		writel_relaxed(mask, pio + PIO_FELLSR);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		writel_relaxed(mask, pio + PIO_LSR);
+		writel_relaxed(mask, pio + PIO_FELLSR);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		writel_relaxed(mask, pio + PIO_LSR);
+		writel_relaxed(mask, pio + PIO_REHLSR);
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		/*
+		 * disable additional interrupt modes:
+		 * fall back to default behavior
+		 */
+		writel_relaxed(mask, pio + PIO_AIMDR);
+		return 0;
+	case IRQ_TYPE_NONE:
+	default:
+		pr_warn("AT91: No type for irq %d\n", gpio_to_irq(d->irq));
+		return -EINVAL;
+	}
+
+	/* enable additional interrupt modes */
+	writel_relaxed(mask, pio + PIO_AIMER);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
+{
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+	unsigned	bank = at91_gpio->pioc_idx;
+
+	if (unlikely(bank >= MAX_GPIO_BANKS))
+		return -EINVAL;
+
+	irq_set_irq_wake(at91_gpio->pioc_virq, state);
+
+	return 0;
+}
+#else
+#define gpio_irq_set_wake	NULL
+#endif
+
+static struct irq_chip gpio_irqchip = {
+	.name		= "GPIO",
+	.irq_disable	= gpio_irq_mask,
+	.irq_mask	= gpio_irq_mask,
+	.irq_unmask	= gpio_irq_unmask,
+	/* .irq_set_type is set dynamically */
+	.irq_set_wake	= gpio_irq_set_wake,
+};
+
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct irq_data *idata = irq_desc_get_irq_data(desc);
+	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
+	void __iomem	*pio = at91_gpio->regbase;
+	unsigned long	isr;
+	int		n;
+
+	chained_irq_enter(chip, desc);
+	for (;;) {
+		/* Reading ISR acks pending (edge triggered) GPIO interrupts.
+		 * When there none are pending, we're finished unless we need
+		 * to process multiple banks (like ID_PIOCDE on sam9263).
+		 */
+		isr = readl_relaxed(pio + PIO_ISR) & readl_relaxed(pio + PIO_IMR);
+		if (!isr) {
+			if (!at91_gpio->next)
+				break;
+			at91_gpio = at91_gpio->next;
+			pio = at91_gpio->regbase;
+			continue;
+		}
+
+		n = find_first_bit(&isr, BITS_PER_LONG);
+		while (n < BITS_PER_LONG) {
+			generic_handle_irq(irq_find_mapping(at91_gpio->domain, n));
+			n = find_next_bit(&isr, BITS_PER_LONG, n + 1);
+		}
+	}
+	chained_irq_exit(chip, desc);
+	/* now it may re-trigger */
+}
+
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	struct at91_gpio_chip	*at91_gpio = h->host_data;
+
+	irq_set_lockdep_class(virq, &gpio_lock_class);
+
+	/*
+	 * Can use the "simple" and not "edge" handler since it's
+	 * shorter, and the AIC handles interrupts sanely.
+	 */
+	irq_set_chip_and_handler(virq, &gpio_irqchip,
+				 handle_simple_irq);
+	set_irq_flags(virq, IRQF_VALID);
+	irq_set_chip_data(virq, at91_gpio);
+
+	return 0;
+}
+
+static struct irq_domain_ops at91_gpio_ops = {
+	.map	= at91_gpio_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static int at91_gpio_of_irq_setup(struct device_node *node,
+				  struct at91_gpio_chip *at91_gpio)
+{
+	struct at91_gpio_chip	*prev = NULL;
+	struct irq_data		*d = irq_get_irq_data(at91_gpio->pioc_virq);
+
+	at91_gpio->pioc_hwirq = irqd_to_hwirq(d);
+
+	/* Setup proper .irq_set_type function */
+	gpio_irqchip.irq_set_type = at91_gpio->ops->irq_type;
+
+	/* Disable irqs of this PIO controller */
+	writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
+
+	/* Setup irq domain */
+	at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio,
+						&at91_gpio_ops, at91_gpio);
+	if (!at91_gpio->domain)
+		panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n",
+			at91_gpio->pioc_idx);
+
+	/* Setup chained handler */
+	if (at91_gpio->pioc_idx)
+		prev = gpio_chips[at91_gpio->pioc_idx - 1];
+
+	/* The toplevel handler handles one bank of GPIOs, except
+	 * on some SoC it can handles up to three...
+	 * We only set up the handler for the first of the list.
+	 */
+	if (prev && prev->next == at91_gpio)
+		return 0;
+
+	irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio);
+	irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler);
+
+	return 0;
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip at91_gpio_template = {
+	.request		= at91_gpio_request,
+	.free			= at91_gpio_free,
+	.direction_input	= at91_gpio_direction_input,
+	.get			= at91_gpio_get,
+	.direction_output	= at91_gpio_direction_output,
+	.set			= at91_gpio_set,
+	.to_irq			= at91_gpio_to_irq,
+	.dbg_show		= at91_gpio_dbg_show,
+	.can_sleep		= 0,
+	.ngpio			= MAX_NB_GPIO_PER_BANK,
+};
+
+static void __devinit at91_gpio_probe_fixup(void)
+{
+	unsigned i;
+	struct at91_gpio_chip *at91_gpio, *last = NULL;
+
+	for (i = 0; i < gpio_banks; i++) {
+		at91_gpio = gpio_chips[i];
+
+		/*
+		 * GPIO controller are grouped on some SoC:
+		 * PIOC, PIOD and PIOE can share the same IRQ line
+		 */
+		if (last && last->pioc_virq == at91_gpio->pioc_virq)
+			last->next = at91_gpio;
+		last = at91_gpio;
+	}
+}
+
+static struct of_device_id at91_gpio_of_match[] __devinitdata = {
+	{ .compatible = "atmel,at91sam9x5-gpio", .data = &at91sam9x5_ops, },
+	{ .compatible = "atmel,at91rm9200-gpio", .data = &at91rm9200_ops },
+	{ /* sentinel */ }
+};
+
+static int __devinit at91_gpio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	struct at91_gpio_chip *at91_chip = NULL;
+	struct gpio_chip *chip;
+	struct pinctrl_gpio_range *range;
+	int ret = 0;
+	int irq;
+	int alias_idx = of_alias_get_id(np, "gpio");
+	uint32_t ngpio;
+
+	BUG_ON(alias_idx >= ARRAY_SIZE(gpio_chips));
+	if (gpio_chips[alias_idx]) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENOENT;
+		goto err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err;
+	}
+
+	at91_chip = devm_kzalloc(&pdev->dev, sizeof(*at91_chip), GFP_KERNEL);
+	if (!at91_chip) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	at91_chip->regbase = devm_request_and_ioremap(&pdev->dev, res);
+	if (!at91_chip->regbase) {
+		dev_err(&pdev->dev, "failed to map registers, ignoring.\n");
+		ret = -EBUSY;
+		goto err;
+	}
+
+	at91_chip->ops =
+		of_match_device(at91_gpio_of_match, &pdev->dev)->data;
+	at91_chip->pioc_virq = irq;
+	at91_chip->pioc_idx = alias_idx;
+
+	at91_chip->clock = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(at91_chip->clock)) {
+		dev_err(&pdev->dev, "failed to get clock, ignoring.\n");
+		goto err;
+	}
+
+	if (clk_prepare(at91_chip->clock))
+		goto clk_prep_err;
+
+	/* enable PIO controller's clock */
+	if (clk_enable(at91_chip->clock)) {
+		dev_err(&pdev->dev, "failed to enable clock, ignoring.\n");
+		goto clk_err;
+	}
+
+	at91_chip->chip = at91_gpio_template;
+
+	chip = &at91_chip->chip;
+	chip->of_node = np;
+	chip->label = dev_name(&pdev->dev);
+	chip->dev = &pdev->dev;
+	chip->owner = THIS_MODULE;
+	chip->base = alias_idx * MAX_NB_GPIO_PER_BANK;
+
+	if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) {
+		if (ngpio >= MAX_NB_GPIO_PER_BANK)
+			pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n",
+			       alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK);
+		else
+			chip->ngpio = ngpio;
+	}
+
+	range = &at91_chip->range;
+	range->name = chip->label;
+	range->id = alias_idx;
+	range->pin_base = range->base = range->id * MAX_NB_GPIO_PER_BANK;
+
+	range->npins = chip->ngpio;
+	range->gc = chip;
+
+	ret = gpiochip_add(chip);
+	if (ret)
+		goto clk_err;
+
+	gpio_chips[alias_idx] = at91_chip;
+	gpio_banks = max(gpio_banks, alias_idx + 1);
+
+	at91_gpio_probe_fixup();
+
+	at91_gpio_of_irq_setup(np, at91_chip);
+
+	dev_info(&pdev->dev, "at address %p\n", at91_chip->regbase);
+
+	return 0;
+
+clk_err:
+	clk_unprepare(at91_chip->clock);
+clk_prep_err:
+	clk_put(at91_chip->clock);
+err:
+	dev_err(&pdev->dev, "Failure %i for GPIO %i\n", ret, alias_idx);
+
+	return ret;
+}
+
+static struct platform_driver at91_gpio_driver = {
+	.driver = {
+		.name = "gpio-at91",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(at91_gpio_of_match),
+	},
+	.probe = at91_gpio_probe,
+};
+
+static struct platform_driver at91_pinctrl_driver = {
+	.driver = {
+		.name = "pinctrl-at91",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(at91_pinctrl_of_match),
+	},
+	.probe = at91_pinctrl_probe,
+	.remove = __devexit_p(at91_pinctrl_remove),
+};
+
+static int __init at91_pinctrl_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&at91_gpio_driver);
+	if (ret)
+		return ret;
+	return platform_driver_register(&at91_pinctrl_driver);
+}
+arch_initcall(at91_pinctrl_init);
+
+static void __exit at91_pinctrl_exit(void)
+{
+	platform_driver_unregister(&at91_pinctrl_driver);
+}
+
+module_exit(at91_pinctrl_exit);
+MODULE_AUTHOR("Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>");
+MODULE_DESCRIPTION("Atmel AT91 pinctrl driver");
+MODULE_LICENSE("GPL v2");