| /* |
| * Wavelan Pcmcia driver |
| * |
| * Jean II - HPLB '96 |
| * |
| * Reorganisation and extension of the driver. |
| * Original copyright follow. See wavelan_cs.p.h for details. |
| * |
| * This code is derived from Anthony D. Joseph's code and all the changes here |
| * are also under the original copyright below. |
| * |
| * This code supports version 2.00 of WaveLAN/PCMCIA cards (2.4GHz), and |
| * can work on Linux 2.0.36 with support of David Hinds' PCMCIA Card Services |
| * |
| * Joe Finney (joe@comp.lancs.ac.uk) at Lancaster University in UK added |
| * critical code in the routine to initialize the Modem Management Controller. |
| * |
| * Thanks to Alan Cox and Bruce Janson for their advice. |
| * |
| * -- Yunzhou Li (scip4166@nus.sg) |
| * |
| #ifdef WAVELAN_ROAMING |
| * Roaming support added 07/22/98 by Justin Seger (jseger@media.mit.edu) |
| * based on patch by Joe Finney from Lancaster University. |
| #endif |
| * |
| * Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An |
| * Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor. |
| * |
| * A non-shared memory PCMCIA ethernet driver for linux |
| * |
| * ISA version modified to support PCMCIA by Anthony Joseph (adj@lcs.mit.edu) |
| * |
| * |
| * Joseph O'Sullivan & John Langford (josullvn@cs.cmu.edu & jcl@cs.cmu.edu) |
| * |
| * Apr 2 '98 made changes to bring the i82593 control/int handling in line |
| * with offical specs... |
| * |
| **************************************************************************** |
| * Copyright 1995 |
| * Anthony D. Joseph |
| * Massachusetts Institute of Technology |
| * |
| * Permission to use, copy, modify, and distribute this program |
| * for any purpose and without fee is hereby granted, provided |
| * that this copyright and permission notice appear on all copies |
| * and supporting documentation, the name of M.I.T. not be used |
| * in advertising or publicity pertaining to distribution of the |
| * program without specific prior permission, and notice be given |
| * in supporting documentation that copying and distribution is |
| * by permission of M.I.T. M.I.T. makes no representations about |
| * the suitability of this software for any purpose. It is pro- |
| * vided "as is" without express or implied warranty. |
| **************************************************************************** |
| * |
| */ |
| |
| /* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */ |
| #include "wavelan_cs.p.h" /* Private header */ |
| |
| #ifdef WAVELAN_ROAMING |
| static void wl_cell_expiry(unsigned long data); |
| static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp); |
| static void wv_nwid_filter(unsigned char mode, net_local *lp); |
| #endif /* WAVELAN_ROAMING */ |
| |
| /************************* MISC SUBROUTINES **************************/ |
| /* |
| * Subroutines which won't fit in one of the following category |
| * (wavelan modem or i82593) |
| */ |
| |
| /******************* MODEM MANAGEMENT SUBROUTINES *******************/ |
| /* |
| * Useful subroutines to manage the modem of the wavelan |
| */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Read from card's Host Adaptor Status Register. |
| */ |
| static inline u_char |
| hasr_read(u_long base) |
| { |
| return(inb(HASR(base))); |
| } /* hasr_read */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Write to card's Host Adapter Command Register. |
| */ |
| static inline void |
| hacr_write(u_long base, |
| u_char hacr) |
| { |
| outb(hacr, HACR(base)); |
| } /* hacr_write */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Write to card's Host Adapter Command Register. Include a delay for |
| * those times when it is needed. |
| */ |
| static void |
| hacr_write_slow(u_long base, |
| u_char hacr) |
| { |
| hacr_write(base, hacr); |
| /* delay might only be needed sometimes */ |
| mdelay(1); |
| } /* hacr_write_slow */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Read the Parameter Storage Area from the WaveLAN card's memory |
| */ |
| static void |
| psa_read(struct net_device * dev, |
| int o, /* offset in PSA */ |
| u_char * b, /* buffer to fill */ |
| int n) /* size to read */ |
| { |
| net_local *lp = netdev_priv(dev); |
| u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1); |
| |
| while(n-- > 0) |
| { |
| *b++ = readb(ptr); |
| /* Due to a lack of address decode pins, the WaveLAN PCMCIA card |
| * only supports reading even memory addresses. That means the |
| * increment here MUST be two. |
| * Because of that, we can't use memcpy_fromio()... |
| */ |
| ptr += 2; |
| } |
| } /* psa_read */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Write the Parameter Storage Area to the WaveLAN card's memory |
| */ |
| static void |
| psa_write(struct net_device * dev, |
| int o, /* Offset in psa */ |
| u_char * b, /* Buffer in memory */ |
| int n) /* Length of buffer */ |
| { |
| net_local *lp = netdev_priv(dev); |
| u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1); |
| int count = 0; |
| unsigned int base = dev->base_addr; |
| /* As there seem to have no flag PSA_BUSY as in the ISA model, we are |
| * oblige to verify this address to know when the PSA is ready... */ |
| volatile u_char __iomem *verify = lp->mem + PSA_ADDR + |
| (psaoff(0, psa_comp_number) << 1); |
| |
| /* Authorize writing to PSA */ |
| hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN); |
| |
| while(n-- > 0) |
| { |
| /* write to PSA */ |
| writeb(*b++, ptr); |
| ptr += 2; |
| |
| /* I don't have the spec, so I don't know what the correct |
| * sequence to write is. This hack seem to work for me... */ |
| count = 0; |
| while((readb(verify) != PSA_COMP_PCMCIA_915) && (count++ < 100)) |
| mdelay(1); |
| } |
| |
| /* Put the host interface back in standard state */ |
| hacr_write(base, HACR_DEFAULT); |
| } /* psa_write */ |
| |
| #ifdef SET_PSA_CRC |
| /*------------------------------------------------------------------*/ |
| /* |
| * Calculate the PSA CRC |
| * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code |
| * NOTE: By specifying a length including the CRC position the |
| * returned value should be zero. (i.e. a correct checksum in the PSA) |
| * |
| * The Windows drivers don't use the CRC, but the AP and the PtP tool |
| * depend on it. |
| */ |
| static u_short |
| psa_crc(unsigned char * psa, /* The PSA */ |
| int size) /* Number of short for CRC */ |
| { |
| int byte_cnt; /* Loop on the PSA */ |
| u_short crc_bytes = 0; /* Data in the PSA */ |
| int bit_cnt; /* Loop on the bits of the short */ |
| |
| for(byte_cnt = 0; byte_cnt < size; byte_cnt++ ) |
| { |
| crc_bytes ^= psa[byte_cnt]; /* Its an xor */ |
| |
| for(bit_cnt = 1; bit_cnt < 9; bit_cnt++ ) |
| { |
| if(crc_bytes & 0x0001) |
| crc_bytes = (crc_bytes >> 1) ^ 0xA001; |
| else |
| crc_bytes >>= 1 ; |
| } |
| } |
| |
| return crc_bytes; |
| } /* psa_crc */ |
| #endif /* SET_PSA_CRC */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * update the checksum field in the Wavelan's PSA |
| */ |
| static void |
| update_psa_checksum(struct net_device * dev) |
| { |
| #ifdef SET_PSA_CRC |
| psa_t psa; |
| u_short crc; |
| |
| /* read the parameter storage area */ |
| psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); |
| |
| /* update the checksum */ |
| crc = psa_crc((unsigned char *) &psa, |
| sizeof(psa) - sizeof(psa.psa_crc[0]) - sizeof(psa.psa_crc[1]) |
| - sizeof(psa.psa_crc_status)); |
| |
| psa.psa_crc[0] = crc & 0xFF; |
| psa.psa_crc[1] = (crc & 0xFF00) >> 8; |
| |
| /* Write it ! */ |
| psa_write(dev, (char *)&psa.psa_crc - (char *)&psa, |
| (unsigned char *)&psa.psa_crc, 2); |
| |
| #ifdef DEBUG_IOCTL_INFO |
| printk (KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n", |
| dev->name, psa.psa_crc[0], psa.psa_crc[1]); |
| |
| /* Check again (luxury !) */ |
| crc = psa_crc((unsigned char *) &psa, |
| sizeof(psa) - sizeof(psa.psa_crc_status)); |
| |
| if(crc != 0) |
| printk(KERN_WARNING "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", dev->name); |
| #endif /* DEBUG_IOCTL_INFO */ |
| #endif /* SET_PSA_CRC */ |
| } /* update_psa_checksum */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Write 1 byte to the MMC. |
| */ |
| static void |
| mmc_out(u_long base, |
| u_short o, |
| u_char d) |
| { |
| int count = 0; |
| |
| /* Wait for MMC to go idle */ |
| while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY)) |
| udelay(10); |
| |
| outb((u_char)((o << 1) | MMR_MMI_WR), MMR(base)); |
| outb(d, MMD(base)); |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Routine to write bytes to the Modem Management Controller. |
| * We start by the end because it is the way it should be ! |
| */ |
| static void |
| mmc_write(u_long base, |
| u_char o, |
| u_char * b, |
| int n) |
| { |
| o += n; |
| b += n; |
| |
| while(n-- > 0 ) |
| mmc_out(base, --o, *(--b)); |
| } /* mmc_write */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Read 1 byte from the MMC. |
| * Optimised version for 1 byte, avoid using memory... |
| */ |
| static u_char |
| mmc_in(u_long base, |
| u_short o) |
| { |
| int count = 0; |
| |
| while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY)) |
| udelay(10); |
| outb(o << 1, MMR(base)); /* Set the read address */ |
| |
| outb(0, MMD(base)); /* Required dummy write */ |
| |
| while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY)) |
| udelay(10); |
| return (u_char) (inb(MMD(base))); /* Now do the actual read */ |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Routine to read bytes from the Modem Management Controller. |
| * The implementation is complicated by a lack of address lines, |
| * which prevents decoding of the low-order bit. |
| * (code has just been moved in the above function) |
| * We start by the end because it is the way it should be ! |
| */ |
| static void |
| mmc_read(u_long base, |
| u_char o, |
| u_char * b, |
| int n) |
| { |
| o += n; |
| b += n; |
| |
| while(n-- > 0) |
| *(--b) = mmc_in(base, --o); |
| } /* mmc_read */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Get the type of encryption available... |
| */ |
| static inline int |
| mmc_encr(u_long base) /* i/o port of the card */ |
| { |
| int temp; |
| |
| temp = mmc_in(base, mmroff(0, mmr_des_avail)); |
| if((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES)) |
| return 0; |
| else |
| return temp; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wait for the frequency EEprom to complete a command... |
| */ |
| static void |
| fee_wait(u_long base, /* i/o port of the card */ |
| int delay, /* Base delay to wait for */ |
| int number) /* Number of time to wait */ |
| { |
| int count = 0; /* Wait only a limited time */ |
| |
| while((count++ < number) && |
| (mmc_in(base, mmroff(0, mmr_fee_status)) & MMR_FEE_STATUS_BUSY)) |
| udelay(delay); |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Read bytes from the Frequency EEprom (frequency select cards). |
| */ |
| static void |
| fee_read(u_long base, /* i/o port of the card */ |
| u_short o, /* destination offset */ |
| u_short * b, /* data buffer */ |
| int n) /* number of registers */ |
| { |
| b += n; /* Position at the end of the area */ |
| |
| /* Write the address */ |
| mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1); |
| |
| /* Loop on all buffer */ |
| while(n-- > 0) |
| { |
| /* Write the read command */ |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_READ); |
| |
| /* Wait until EEprom is ready (should be quick !) */ |
| fee_wait(base, 10, 100); |
| |
| /* Read the value */ |
| *--b = ((mmc_in(base, mmroff(0, mmr_fee_data_h)) << 8) | |
| mmc_in(base, mmroff(0, mmr_fee_data_l))); |
| } |
| } |
| |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Write bytes from the Frequency EEprom (frequency select cards). |
| * This is a bit complicated, because the frequency eeprom has to |
| * be unprotected and the write enabled. |
| * Jean II |
| */ |
| static void |
| fee_write(u_long base, /* i/o port of the card */ |
| u_short o, /* destination offset */ |
| u_short * b, /* data buffer */ |
| int n) /* number of registers */ |
| { |
| b += n; /* Position at the end of the area */ |
| |
| #ifdef EEPROM_IS_PROTECTED /* disabled */ |
| #ifdef DOESNT_SEEM_TO_WORK /* disabled */ |
| /* Ask to read the protected register */ |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD); |
| |
| fee_wait(base, 10, 100); |
| |
| /* Read the protected register */ |
| printk("Protected 2 : %02X-%02X\n", |
| mmc_in(base, mmroff(0, mmr_fee_data_h)), |
| mmc_in(base, mmroff(0, mmr_fee_data_l))); |
| #endif /* DOESNT_SEEM_TO_WORK */ |
| |
| /* Enable protected register */ |
| mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN); |
| |
| fee_wait(base, 10, 100); |
| |
| /* Unprotect area */ |
| mmc_out(base, mmwoff(0, mmw_fee_addr), o + n); |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); |
| #ifdef DOESNT_SEEM_TO_WORK /* disabled */ |
| /* Or use : */ |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR); |
| #endif /* DOESNT_SEEM_TO_WORK */ |
| |
| fee_wait(base, 10, 100); |
| #endif /* EEPROM_IS_PROTECTED */ |
| |
| /* Write enable */ |
| mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN); |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN); |
| |
| fee_wait(base, 10, 100); |
| |
| /* Write the EEprom address */ |
| mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1); |
| |
| /* Loop on all buffer */ |
| while(n-- > 0) |
| { |
| /* Write the value */ |
| mmc_out(base, mmwoff(0, mmw_fee_data_h), (*--b) >> 8); |
| mmc_out(base, mmwoff(0, mmw_fee_data_l), *b & 0xFF); |
| |
| /* Write the write command */ |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WRITE); |
| |
| /* Wavelan doc says : wait at least 10 ms for EEBUSY = 0 */ |
| mdelay(10); |
| fee_wait(base, 10, 100); |
| } |
| |
| /* Write disable */ |
| mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS); |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS); |
| |
| fee_wait(base, 10, 100); |
| |
| #ifdef EEPROM_IS_PROTECTED /* disabled */ |
| /* Reprotect EEprom */ |
| mmc_out(base, mmwoff(0, mmw_fee_addr), 0x00); |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE); |
| |
| fee_wait(base, 10, 100); |
| #endif /* EEPROM_IS_PROTECTED */ |
| } |
| |
| /******************* WaveLAN Roaming routines... ********************/ |
| |
| #ifdef WAVELAN_ROAMING /* Conditional compile, see wavelan_cs.h */ |
| |
| static unsigned char WAVELAN_BEACON_ADDRESS[] = {0x09,0x00,0x0e,0x20,0x03,0x00}; |
| |
| static void wv_roam_init(struct net_device *dev) |
| { |
| net_local *lp= netdev_priv(dev); |
| |
| /* Do not remove this unless you have a good reason */ |
| printk(KERN_NOTICE "%s: Warning, you have enabled roaming on" |
| " device %s !\n", dev->name, dev->name); |
| printk(KERN_NOTICE "Roaming is currently an experimental unsupported feature" |
| " of the Wavelan driver.\n"); |
| printk(KERN_NOTICE "It may work, but may also make the driver behave in" |
| " erratic ways or crash.\n"); |
| |
| lp->wavepoint_table.head=NULL; /* Initialise WavePoint table */ |
| lp->wavepoint_table.num_wavepoints=0; |
| lp->wavepoint_table.locked=0; |
| lp->curr_point=NULL; /* No default WavePoint */ |
| lp->cell_search=0; |
| |
| lp->cell_timer.data=(long)lp; /* Start cell expiry timer */ |
| lp->cell_timer.function=wl_cell_expiry; |
| lp->cell_timer.expires=jiffies+CELL_TIMEOUT; |
| add_timer(&lp->cell_timer); |
| |
| wv_nwid_filter(NWID_PROMISC,lp) ; /* Enter NWID promiscuous mode */ |
| /* to build up a good WavePoint */ |
| /* table... */ |
| printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name); |
| } |
| |
| static void wv_roam_cleanup(struct net_device *dev) |
| { |
| wavepoint_history *ptr,*old_ptr; |
| net_local *lp= netdev_priv(dev); |
| |
| printk(KERN_DEBUG "WaveLAN: Roaming Disabled on device %s\n",dev->name); |
| |
| /* Fixme : maybe we should check that the timer exist before deleting it */ |
| del_timer(&lp->cell_timer); /* Remove cell expiry timer */ |
| ptr=lp->wavepoint_table.head; /* Clear device's WavePoint table */ |
| while(ptr!=NULL) |
| { |
| old_ptr=ptr; |
| ptr=ptr->next; |
| wl_del_wavepoint(old_ptr,lp); |
| } |
| } |
| |
| /* Enable/Disable NWID promiscuous mode on a given device */ |
| static void wv_nwid_filter(unsigned char mode, net_local *lp) |
| { |
| mm_t m; |
| unsigned long flags; |
| |
| #ifdef WAVELAN_ROAMING_DEBUG |
| printk(KERN_DEBUG "WaveLAN: NWID promisc %s, device %s\n",(mode==NWID_PROMISC) ? "on" : "off", lp->dev->name); |
| #endif |
| |
| /* Disable interrupts & save flags */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00; |
| mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1); |
| |
| if(mode==NWID_PROMISC) |
| lp->cell_search=1; |
| else |
| lp->cell_search=0; |
| |
| /* ReEnable interrupts & restore flags */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| } |
| |
| /* Find a record in the WavePoint table matching a given NWID */ |
| static wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp) |
| { |
| wavepoint_history *ptr=lp->wavepoint_table.head; |
| |
| while(ptr!=NULL){ |
| if(ptr->nwid==nwid) |
| return ptr; |
| ptr=ptr->next; |
| } |
| return NULL; |
| } |
| |
| /* Create a new wavepoint table entry */ |
| static wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp) |
| { |
| wavepoint_history *new_wavepoint; |
| |
| #ifdef WAVELAN_ROAMING_DEBUG |
| printk(KERN_DEBUG "WaveLAN: New Wavepoint, NWID:%.4X\n",nwid); |
| #endif |
| |
| if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS) |
| return NULL; |
| |
| new_wavepoint = kmalloc(sizeof(wavepoint_history),GFP_ATOMIC); |
| if(new_wavepoint==NULL) |
| return NULL; |
| |
| new_wavepoint->nwid=nwid; /* New WavePoints NWID */ |
| new_wavepoint->average_fast=0; /* Running Averages..*/ |
| new_wavepoint->average_slow=0; |
| new_wavepoint->qualptr=0; /* Start of ringbuffer */ |
| new_wavepoint->last_seq=seq-1; /* Last sequence no.seen */ |
| memset(new_wavepoint->sigqual,0,WAVEPOINT_HISTORY);/* Empty ringbuffer */ |
| |
| new_wavepoint->next=lp->wavepoint_table.head;/* Add to wavepoint table */ |
| new_wavepoint->prev=NULL; |
| |
| if(lp->wavepoint_table.head!=NULL) |
| lp->wavepoint_table.head->prev=new_wavepoint; |
| |
| lp->wavepoint_table.head=new_wavepoint; |
| |
| lp->wavepoint_table.num_wavepoints++; /* no. of visible wavepoints */ |
| |
| return new_wavepoint; |
| } |
| |
| /* Remove a wavepoint entry from WavePoint table */ |
| static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp) |
| { |
| if(wavepoint==NULL) |
| return; |
| |
| if(lp->curr_point==wavepoint) |
| lp->curr_point=NULL; |
| |
| if(wavepoint->prev!=NULL) |
| wavepoint->prev->next=wavepoint->next; |
| |
| if(wavepoint->next!=NULL) |
| wavepoint->next->prev=wavepoint->prev; |
| |
| if(lp->wavepoint_table.head==wavepoint) |
| lp->wavepoint_table.head=wavepoint->next; |
| |
| lp->wavepoint_table.num_wavepoints--; |
| kfree(wavepoint); |
| } |
| |
| /* Timer callback function - checks WavePoint table for stale entries */ |
| static void wl_cell_expiry(unsigned long data) |
| { |
| net_local *lp=(net_local *)data; |
| wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point; |
| |
| #if WAVELAN_ROAMING_DEBUG > 1 |
| printk(KERN_DEBUG "WaveLAN: Wavepoint timeout, dev %s\n",lp->dev->name); |
| #endif |
| |
| if(lp->wavepoint_table.locked) |
| { |
| #if WAVELAN_ROAMING_DEBUG > 1 |
| printk(KERN_DEBUG "WaveLAN: Wavepoint table locked...\n"); |
| #endif |
| |
| lp->cell_timer.expires=jiffies+1; /* If table in use, come back later */ |
| add_timer(&lp->cell_timer); |
| return; |
| } |
| |
| while(wavepoint!=NULL) |
| { |
| if(time_after(jiffies, wavepoint->last_seen + CELL_TIMEOUT)) |
| { |
| #ifdef WAVELAN_ROAMING_DEBUG |
| printk(KERN_DEBUG "WaveLAN: Bye bye %.4X\n",wavepoint->nwid); |
| #endif |
| |
| old_point=wavepoint; |
| wavepoint=wavepoint->next; |
| wl_del_wavepoint(old_point,lp); |
| } |
| else |
| wavepoint=wavepoint->next; |
| } |
| lp->cell_timer.expires=jiffies+CELL_TIMEOUT; |
| add_timer(&lp->cell_timer); |
| } |
| |
| /* Update SNR history of a wavepoint */ |
| static void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq) |
| { |
| int i=0,num_missed=0,ptr=0; |
| int average_fast=0,average_slow=0; |
| |
| num_missed=(seq-wavepoint->last_seq)%WAVEPOINT_HISTORY;/* Have we missed |
| any beacons? */ |
| if(num_missed) |
| for(i=0;i<num_missed;i++) |
| { |
| wavepoint->sigqual[wavepoint->qualptr++]=0; /* If so, enter them as 0's */ |
| wavepoint->qualptr %=WAVEPOINT_HISTORY; /* in the ringbuffer. */ |
| } |
| wavepoint->last_seen=jiffies; /* Add beacon to history */ |
| wavepoint->last_seq=seq; |
| wavepoint->sigqual[wavepoint->qualptr++]=sigqual; |
| wavepoint->qualptr %=WAVEPOINT_HISTORY; |
| ptr=(wavepoint->qualptr-WAVEPOINT_FAST_HISTORY+WAVEPOINT_HISTORY)%WAVEPOINT_HISTORY; |
| |
| for(i=0;i<WAVEPOINT_FAST_HISTORY;i++) /* Update running averages */ |
| { |
| average_fast+=wavepoint->sigqual[ptr++]; |
| ptr %=WAVEPOINT_HISTORY; |
| } |
| |
| average_slow=average_fast; |
| for(i=WAVEPOINT_FAST_HISTORY;i<WAVEPOINT_HISTORY;i++) |
| { |
| average_slow+=wavepoint->sigqual[ptr++]; |
| ptr %=WAVEPOINT_HISTORY; |
| } |
| |
| wavepoint->average_fast=average_fast/WAVEPOINT_FAST_HISTORY; |
| wavepoint->average_slow=average_slow/WAVEPOINT_HISTORY; |
| } |
| |
| /* Perform a handover to a new WavePoint */ |
| static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp) |
| { |
| unsigned int base = lp->dev->base_addr; |
| mm_t m; |
| unsigned long flags; |
| |
| if(wavepoint==lp->curr_point) /* Sanity check... */ |
| { |
| wv_nwid_filter(!NWID_PROMISC,lp); |
| return; |
| } |
| |
| #ifdef WAVELAN_ROAMING_DEBUG |
| printk(KERN_DEBUG "WaveLAN: Doing handover to %.4X, dev %s\n",wavepoint->nwid,lp->dev->name); |
| #endif |
| |
| /* Disable interrupts & save flags */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF; |
| m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8; |
| |
| mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2); |
| |
| /* ReEnable interrupts & restore flags */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| wv_nwid_filter(!NWID_PROMISC,lp); |
| lp->curr_point=wavepoint; |
| } |
| |
| /* Called when a WavePoint beacon is received */ |
| static void wl_roam_gather(struct net_device * dev, |
| u_char * hdr, /* Beacon header */ |
| u_char * stats) /* SNR, Signal quality |
| of packet */ |
| { |
| wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */ |
| unsigned short nwid=ntohs(beacon->nwid); |
| unsigned short sigqual=stats[2] & MMR_SGNL_QUAL; /* SNR of beacon */ |
| wavepoint_history *wavepoint=NULL; /* WavePoint table entry */ |
| net_local *lp = netdev_priv(dev); /* Device info */ |
| |
| #ifdef I_NEED_THIS_FEATURE |
| /* Some people don't need this, some other may need it */ |
| nwid=nwid^ntohs(beacon->domain_id); |
| #endif |
| |
| #if WAVELAN_ROAMING_DEBUG > 1 |
| printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name); |
| printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual); |
| #endif |
| |
| lp->wavepoint_table.locked=1; /* <Mutex> */ |
| |
| wavepoint=wl_roam_check(nwid,lp); /* Find WavePoint table entry */ |
| if(wavepoint==NULL) /* If no entry, Create a new one... */ |
| { |
| wavepoint=wl_new_wavepoint(nwid,beacon->seq,lp); |
| if(wavepoint==NULL) |
| goto out; |
| } |
| if(lp->curr_point==NULL) /* If this is the only WavePoint, */ |
| wv_roam_handover(wavepoint, lp); /* Jump on it! */ |
| |
| wl_update_history(wavepoint, sigqual, beacon->seq); /* Update SNR history |
| stats. */ |
| |
| if(lp->curr_point->average_slow < SEARCH_THRESH_LOW) /* If our current */ |
| if(!lp->cell_search) /* WavePoint is getting faint, */ |
| wv_nwid_filter(NWID_PROMISC,lp); /* start looking for a new one */ |
| |
| if(wavepoint->average_slow > |
| lp->curr_point->average_slow + WAVELAN_ROAMING_DELTA) |
| wv_roam_handover(wavepoint, lp); /* Handover to a better WavePoint */ |
| |
| if(lp->curr_point->average_slow > SEARCH_THRESH_HIGH) /* If our SNR is */ |
| if(lp->cell_search) /* getting better, drop out of cell search mode */ |
| wv_nwid_filter(!NWID_PROMISC,lp); |
| |
| out: |
| lp->wavepoint_table.locked=0; /* </MUTEX> :-) */ |
| } |
| |
| /* Test this MAC frame a WavePoint beacon */ |
| static inline int WAVELAN_BEACON(unsigned char *data) |
| { |
| wavepoint_beacon *beacon= (wavepoint_beacon *)data; |
| static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00}; |
| |
| if(memcmp(beacon,&beacon_template,9)==0) |
| return 1; |
| else |
| return 0; |
| } |
| #endif /* WAVELAN_ROAMING */ |
| |
| /************************ I82593 SUBROUTINES *************************/ |
| /* |
| * Useful subroutines to manage the Ethernet controller |
| */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Routine to synchronously send a command to the i82593 chip. |
| * Should be called with interrupts disabled. |
| * (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(), |
| * wv_82593_config() & wv_diag()) |
| */ |
| static int |
| wv_82593_cmd(struct net_device * dev, |
| char * str, |
| int cmd, |
| int result) |
| { |
| unsigned int base = dev->base_addr; |
| int status; |
| int wait_completed; |
| long spin; |
| |
| /* Spin until the chip finishes executing its current command (if any) */ |
| spin = 1000; |
| do |
| { |
| /* Time calibration of the loop */ |
| udelay(10); |
| |
| /* Read the interrupt register */ |
| outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); |
| status = inb(LCSR(base)); |
| } |
| while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0)); |
| |
| /* If the interrupt hasn't been posted */ |
| if (spin < 0) { |
| #ifdef DEBUG_INTERRUPT_ERROR |
| printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n", |
| str, status); |
| #endif |
| return(FALSE); |
| } |
| |
| /* Issue the command to the controller */ |
| outb(cmd, LCCR(base)); |
| |
| /* If we don't have to check the result of the command |
| * Note : this mean that the irq handler will deal with that */ |
| if(result == SR0_NO_RESULT) |
| return(TRUE); |
| |
| /* We are waiting for command completion */ |
| wait_completed = TRUE; |
| |
| /* Busy wait while the LAN controller executes the command. */ |
| spin = 1000; |
| do |
| { |
| /* Time calibration of the loop */ |
| udelay(10); |
| |
| /* Read the interrupt register */ |
| outb(CR0_STATUS_0 | OP0_NOP, LCCR(base)); |
| status = inb(LCSR(base)); |
| |
| /* Check if there was an interrupt posted */ |
| if((status & SR0_INTERRUPT)) |
| { |
| /* Acknowledge the interrupt */ |
| outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); |
| |
| /* Check if interrupt is a command completion */ |
| if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) && |
| ((status & SR0_BOTH_RX_TX) != 0x0) && |
| !(status & SR0_RECEPTION)) |
| { |
| /* Signal command completion */ |
| wait_completed = FALSE; |
| } |
| else |
| { |
| /* Note : Rx interrupts will be handled later, because we can |
| * handle multiple Rx packets at once */ |
| #ifdef DEBUG_INTERRUPT_INFO |
| printk(KERN_INFO "wv_82593_cmd: not our interrupt\n"); |
| #endif |
| } |
| } |
| } |
| while(wait_completed && (spin-- > 0)); |
| |
| /* If the interrupt hasn't be posted */ |
| if(wait_completed) |
| { |
| #ifdef DEBUG_INTERRUPT_ERROR |
| printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n", |
| str, status); |
| #endif |
| return(FALSE); |
| } |
| |
| /* Check the return code returned by the card (see above) against |
| * the expected return code provided by the caller */ |
| if((status & SR0_EVENT_MASK) != result) |
| { |
| #ifdef DEBUG_INTERRUPT_ERROR |
| printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n", |
| str, status); |
| #endif |
| return(FALSE); |
| } |
| |
| return(TRUE); |
| } /* wv_82593_cmd */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This routine does a 593 op-code number 7, and obtains the diagnose |
| * status for the WaveLAN. |
| */ |
| static inline int |
| wv_diag(struct net_device * dev) |
| { |
| return(wv_82593_cmd(dev, "wv_diag(): diagnose", |
| OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED)); |
| } /* wv_diag */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Routine to read len bytes from the i82593's ring buffer, starting at |
| * chip address addr. The results read from the chip are stored in buf. |
| * The return value is the address to use for next the call. |
| */ |
| static int |
| read_ringbuf(struct net_device * dev, |
| int addr, |
| char * buf, |
| int len) |
| { |
| unsigned int base = dev->base_addr; |
| int ring_ptr = addr; |
| int chunk_len; |
| char * buf_ptr = buf; |
| |
| /* Get all the buffer */ |
| while(len > 0) |
| { |
| /* Position the Program I/O Register at the ring buffer pointer */ |
| outb(ring_ptr & 0xff, PIORL(base)); |
| outb(((ring_ptr >> 8) & PIORH_MASK), PIORH(base)); |
| |
| /* First, determine how much we can read without wrapping around the |
| ring buffer */ |
| if((addr + len) < (RX_BASE + RX_SIZE)) |
| chunk_len = len; |
| else |
| chunk_len = RX_BASE + RX_SIZE - addr; |
| insb(PIOP(base), buf_ptr, chunk_len); |
| buf_ptr += chunk_len; |
| len -= chunk_len; |
| ring_ptr = (ring_ptr - RX_BASE + chunk_len) % RX_SIZE + RX_BASE; |
| } |
| return(ring_ptr); |
| } /* read_ringbuf */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Reconfigure the i82593, or at least ask for it... |
| * Because wv_82593_config use the transmission buffer, we must do it |
| * when we are sure that there is no transmission, so we do it now |
| * or in wavelan_packet_xmit() (I can't find any better place, |
| * wavelan_interrupt is not an option...), so you may experience |
| * some delay sometime... |
| */ |
| static void |
| wv_82593_reconfig(struct net_device * dev) |
| { |
| net_local * lp = netdev_priv(dev); |
| struct pcmcia_device * link = lp->link; |
| unsigned long flags; |
| |
| /* Arm the flag, will be cleard in wv_82593_config() */ |
| lp->reconfig_82593 = TRUE; |
| |
| /* Check if we can do it now ! */ |
| if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev))) |
| { |
| spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */ |
| wv_82593_config(dev); |
| spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */ |
| } |
| else |
| { |
| #ifdef DEBUG_IOCTL_INFO |
| printk(KERN_DEBUG |
| "%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n", |
| dev->name, dev->state, link->open); |
| #endif |
| } |
| } |
| |
| /********************* DEBUG & INFO SUBROUTINES *********************/ |
| /* |
| * This routines are used in the code to show debug informations. |
| * Most of the time, it dump the content of hardware structures... |
| */ |
| |
| #ifdef DEBUG_PSA_SHOW |
| /*------------------------------------------------------------------*/ |
| /* |
| * Print the formatted contents of the Parameter Storage Area. |
| */ |
| static void |
| wv_psa_show(psa_t * p) |
| { |
| printk(KERN_DEBUG "##### wavelan psa contents: #####\n"); |
| printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n", |
| p->psa_io_base_addr_1, |
| p->psa_io_base_addr_2, |
| p->psa_io_base_addr_3, |
| p->psa_io_base_addr_4); |
| printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n", |
| p->psa_rem_boot_addr_1, |
| p->psa_rem_boot_addr_2, |
| p->psa_rem_boot_addr_3); |
| printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params); |
| printk("psa_int_req_no: %d\n", p->psa_int_req_no); |
| #ifdef DEBUG_SHOW_UNUSED |
| printk(KERN_DEBUG "psa_unused0[]: %pM\n", p->psa_unused0); |
| #endif /* DEBUG_SHOW_UNUSED */ |
| printk(KERN_DEBUG "psa_univ_mac_addr[]: %pM\n", p->psa_univ_mac_addr); |
| printk(KERN_DEBUG "psa_local_mac_addr[]: %pM\n", p->psa_local_mac_addr); |
| printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel); |
| printk("psa_comp_number: %d, ", p->psa_comp_number); |
| printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set); |
| printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ", |
| p->psa_feature_select); |
| printk("psa_subband/decay_update_prm: %d\n", p->psa_subband); |
| printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr); |
| printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay); |
| printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], p->psa_nwid[1]); |
| printk("psa_nwid_select: %d\n", p->psa_nwid_select); |
| printk(KERN_DEBUG "psa_encryption_select: %d, ", p->psa_encryption_select); |
| printk("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", |
| p->psa_encryption_key[0], |
| p->psa_encryption_key[1], |
| p->psa_encryption_key[2], |
| p->psa_encryption_key[3], |
| p->psa_encryption_key[4], |
| p->psa_encryption_key[5], |
| p->psa_encryption_key[6], |
| p->psa_encryption_key[7]); |
| printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width); |
| printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ", |
| p->psa_call_code[0]); |
| printk("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", |
| p->psa_call_code[0], |
| p->psa_call_code[1], |
| p->psa_call_code[2], |
| p->psa_call_code[3], |
| p->psa_call_code[4], |
| p->psa_call_code[5], |
| p->psa_call_code[6], |
| p->psa_call_code[7]); |
| #ifdef DEBUG_SHOW_UNUSED |
| printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n", |
| p->psa_reserved[0], |
| p->psa_reserved[1]); |
| #endif /* DEBUG_SHOW_UNUSED */ |
| printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status); |
| printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]); |
| printk("psa_crc_status: 0x%02x\n", p->psa_crc_status); |
| } /* wv_psa_show */ |
| #endif /* DEBUG_PSA_SHOW */ |
| |
| #ifdef DEBUG_MMC_SHOW |
| /*------------------------------------------------------------------*/ |
| /* |
| * Print the formatted status of the Modem Management Controller. |
| * This function need to be completed... |
| */ |
| static void |
| wv_mmc_show(struct net_device * dev) |
| { |
| unsigned int base = dev->base_addr; |
| net_local * lp = netdev_priv(dev); |
| mmr_t m; |
| |
| /* Basic check */ |
| if(hasr_read(base) & HASR_NO_CLK) |
| { |
| printk(KERN_WARNING "%s: wv_mmc_show: modem not connected\n", |
| dev->name); |
| return; |
| } |
| |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Read the mmc */ |
| mmc_out(base, mmwoff(0, mmw_freeze), 1); |
| mmc_read(base, 0, (u_char *)&m, sizeof(m)); |
| mmc_out(base, mmwoff(0, mmw_freeze), 0); |
| |
| /* Don't forget to update statistics */ |
| lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; |
| |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| printk(KERN_DEBUG "##### wavelan modem status registers: #####\n"); |
| #ifdef DEBUG_SHOW_UNUSED |
| printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", |
| m.mmr_unused0[0], |
| m.mmr_unused0[1], |
| m.mmr_unused0[2], |
| m.mmr_unused0[3], |
| m.mmr_unused0[4], |
| m.mmr_unused0[5], |
| m.mmr_unused0[6], |
| m.mmr_unused0[7]); |
| #endif /* DEBUG_SHOW_UNUSED */ |
| printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n", |
| m.mmr_des_avail, m.mmr_des_status); |
| #ifdef DEBUG_SHOW_UNUSED |
| printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n", |
| m.mmr_unused1[0], |
| m.mmr_unused1[1], |
| m.mmr_unused1[2], |
| m.mmr_unused1[3], |
| m.mmr_unused1[4]); |
| #endif /* DEBUG_SHOW_UNUSED */ |
| printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n", |
| m.mmr_dce_status, |
| (m.mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? "energy detected,":"", |
| (m.mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ? |
| "loop test indicated," : "", |
| (m.mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? "transmitter on," : "", |
| (m.mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ? |
| "jabber timer expired," : ""); |
| printk(KERN_DEBUG "Dsp ID: %02X\n", |
| m.mmr_dsp_id); |
| #ifdef DEBUG_SHOW_UNUSED |
| printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n", |
| m.mmr_unused2[0], |
| m.mmr_unused2[1]); |
| #endif /* DEBUG_SHOW_UNUSED */ |
| printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n", |
| (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l, |
| (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l); |
| printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n", |
| m.mmr_thr_pre_set & MMR_THR_PRE_SET, |
| (m.mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : "below"); |
| printk(KERN_DEBUG "signal_lvl: %d [%s], ", |
| m.mmr_signal_lvl & MMR_SIGNAL_LVL, |
| (m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : "no new msg"); |
| printk("silence_lvl: %d [%s], ", m.mmr_silence_lvl & MMR_SILENCE_LVL, |
| (m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : "no new update"); |
| printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL, |
| (m.mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : "Antenna 0"); |
| #ifdef DEBUG_SHOW_UNUSED |
| printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l); |
| #endif /* DEBUG_SHOW_UNUSED */ |
| } /* wv_mmc_show */ |
| #endif /* DEBUG_MMC_SHOW */ |
| |
| #ifdef DEBUG_I82593_SHOW |
| /*------------------------------------------------------------------*/ |
| /* |
| * Print the formatted status of the i82593's receive unit. |
| */ |
| static void |
| wv_ru_show(struct net_device * dev) |
| { |
| net_local *lp = netdev_priv(dev); |
| |
| printk(KERN_DEBUG "##### wavelan i82593 receiver status: #####\n"); |
| printk(KERN_DEBUG "ru: rfp %d stop %d", lp->rfp, lp->stop); |
| /* |
| * Not implemented yet... |
| */ |
| printk("\n"); |
| } /* wv_ru_show */ |
| #endif /* DEBUG_I82593_SHOW */ |
| |
| #ifdef DEBUG_DEVICE_SHOW |
| /*------------------------------------------------------------------*/ |
| /* |
| * Print the formatted status of the WaveLAN PCMCIA device driver. |
| */ |
| static void |
| wv_dev_show(struct net_device * dev) |
| { |
| printk(KERN_DEBUG "dev:"); |
| printk(" state=%lX,", dev->state); |
| printk(" trans_start=%ld,", dev->trans_start); |
| printk(" flags=0x%x,", dev->flags); |
| printk("\n"); |
| } /* wv_dev_show */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Print the formatted status of the WaveLAN PCMCIA device driver's |
| * private information. |
| */ |
| static void |
| wv_local_show(struct net_device * dev) |
| { |
| net_local *lp = netdev_priv(dev); |
| |
| printk(KERN_DEBUG "local:"); |
| /* |
| * Not implemented yet... |
| */ |
| printk("\n"); |
| } /* wv_local_show */ |
| #endif /* DEBUG_DEVICE_SHOW */ |
| |
| #if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) |
| /*------------------------------------------------------------------*/ |
| /* |
| * Dump packet header (and content if necessary) on the screen |
| */ |
| static void |
| wv_packet_info(u_char * p, /* Packet to dump */ |
| int length, /* Length of the packet */ |
| char * msg1, /* Name of the device */ |
| char * msg2) /* Name of the function */ |
| { |
| int i; |
| int maxi; |
| |
| printk(KERN_DEBUG "%s: %s(): dest %pM, length %d\n", |
| msg1, msg2, p, length); |
| printk(KERN_DEBUG "%s: %s(): src %pM, type 0x%02X%02X\n", |
| msg1, msg2, &p[6], p[12], p[13]); |
| |
| #ifdef DEBUG_PACKET_DUMP |
| |
| printk(KERN_DEBUG "data=\""); |
| |
| if((maxi = length) > DEBUG_PACKET_DUMP) |
| maxi = DEBUG_PACKET_DUMP; |
| for(i = 14; i < maxi; i++) |
| if(p[i] >= ' ' && p[i] <= '~') |
| printk(" %c", p[i]); |
| else |
| printk("%02X", p[i]); |
| if(maxi < length) |
| printk(".."); |
| printk("\"\n"); |
| printk(KERN_DEBUG "\n"); |
| #endif /* DEBUG_PACKET_DUMP */ |
| } |
| #endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This is the information which is displayed by the driver at startup |
| * There is a lot of flag to configure it at your will... |
| */ |
| static void |
| wv_init_info(struct net_device * dev) |
| { |
| unsigned int base = dev->base_addr; |
| psa_t psa; |
| |
| /* Read the parameter storage area */ |
| psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); |
| |
| #ifdef DEBUG_PSA_SHOW |
| wv_psa_show(&psa); |
| #endif |
| #ifdef DEBUG_MMC_SHOW |
| wv_mmc_show(dev); |
| #endif |
| #ifdef DEBUG_I82593_SHOW |
| wv_ru_show(dev); |
| #endif |
| |
| #ifdef DEBUG_BASIC_SHOW |
| /* Now, let's go for the basic stuff */ |
| printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, hw_addr %pM", |
| dev->name, base, dev->irq, dev->dev_addr); |
| |
| /* Print current network id */ |
| if(psa.psa_nwid_select) |
| printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], psa.psa_nwid[1]); |
| else |
| printk(", nwid off"); |
| |
| /* If 2.00 card */ |
| if(!(mmc_in(base, mmroff(0, mmr_fee_status)) & |
| (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) |
| { |
| unsigned short freq; |
| |
| /* Ask the EEprom to read the frequency from the first area */ |
| fee_read(base, 0x00 /* 1st area - frequency... */, |
| &freq, 1); |
| |
| /* Print frequency */ |
| printk(", 2.00, %ld", (freq >> 6) + 2400L); |
| |
| /* Hack !!! */ |
| if(freq & 0x20) |
| printk(".5"); |
| } |
| else |
| { |
| printk(", PCMCIA, "); |
| switch (psa.psa_subband) |
| { |
| case PSA_SUBBAND_915: |
| printk("915"); |
| break; |
| case PSA_SUBBAND_2425: |
| printk("2425"); |
| break; |
| case PSA_SUBBAND_2460: |
| printk("2460"); |
| break; |
| case PSA_SUBBAND_2484: |
| printk("2484"); |
| break; |
| case PSA_SUBBAND_2430_5: |
| printk("2430.5"); |
| break; |
| default: |
| printk("unknown"); |
| } |
| } |
| |
| printk(" MHz\n"); |
| #endif /* DEBUG_BASIC_SHOW */ |
| |
| #ifdef DEBUG_VERSION_SHOW |
| /* Print version information */ |
| printk(KERN_NOTICE "%s", version); |
| #endif |
| } /* wv_init_info */ |
| |
| /********************* IOCTL, STATS & RECONFIG *********************/ |
| /* |
| * We found here routines that are called by Linux on differents |
| * occasions after the configuration and not for transmitting data |
| * These may be called when the user use ifconfig, /proc/net/dev |
| * or wireless extensions |
| */ |
| |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Set or clear the multicast filter for this adaptor. |
| * num_addrs == -1 Promiscuous mode, receive all packets |
| * num_addrs == 0 Normal mode, clear multicast list |
| * num_addrs > 0 Multicast mode, receive normal and MC packets, |
| * and do best-effort filtering. |
| */ |
| |
| static void |
| wavelan_set_multicast_list(struct net_device * dev) |
| { |
| net_local * lp = netdev_priv(dev); |
| |
| #ifdef DEBUG_IOCTL_TRACE |
| printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", dev->name); |
| #endif |
| |
| #ifdef DEBUG_IOCTL_INFO |
| printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n", |
| dev->name, dev->flags, netdev_mc_count(dev)); |
| #endif |
| |
| if(dev->flags & IFF_PROMISC) |
| { |
| /* |
| * Enable promiscuous mode: receive all packets. |
| */ |
| if(!lp->promiscuous) |
| { |
| lp->promiscuous = 1; |
| lp->allmulticast = 0; |
| lp->mc_count = 0; |
| |
| wv_82593_reconfig(dev); |
| } |
| } |
| else |
| /* If all multicast addresses |
| * or too much multicast addresses for the hardware filter */ |
| if((dev->flags & IFF_ALLMULTI) || |
| (netdev_mc_count(dev) > I82593_MAX_MULTICAST_ADDRESSES)) |
| { |
| /* |
| * Disable promiscuous mode, but active the all multicast mode |
| */ |
| if(!lp->allmulticast) |
| { |
| lp->promiscuous = 0; |
| lp->allmulticast = 1; |
| lp->mc_count = 0; |
| |
| wv_82593_reconfig(dev); |
| } |
| } |
| else |
| /* If there is some multicast addresses to send */ |
| if(dev->mc_list != (struct dev_mc_list *) NULL) |
| { |
| /* |
| * Disable promiscuous mode, but receive all packets |
| * in multicast list |
| */ |
| #ifdef MULTICAST_AVOID |
| if(lp->promiscuous || lp->allmulticast || |
| (netdev_mc_count(dev) != lp->mc_count)) |
| #endif |
| { |
| lp->promiscuous = 0; |
| lp->allmulticast = 0; |
| lp->mc_count = netdev_mc_count(dev); |
| |
| wv_82593_reconfig(dev); |
| } |
| } |
| else |
| { |
| /* |
| * Switch to normal mode: disable promiscuous mode and |
| * clear the multicast list. |
| */ |
| if(lp->promiscuous || lp->mc_count == 0) |
| { |
| lp->promiscuous = 0; |
| lp->allmulticast = 0; |
| lp->mc_count = 0; |
| |
| wv_82593_reconfig(dev); |
| } |
| } |
| #ifdef DEBUG_IOCTL_TRACE |
| printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", dev->name); |
| #endif |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This function doesn't exist... |
| * (Note : it was a nice way to test the reconfigure stuff...) |
| */ |
| #ifdef SET_MAC_ADDRESS |
| static int |
| wavelan_set_mac_address(struct net_device * dev, |
| void * addr) |
| { |
| struct sockaddr * mac = addr; |
| |
| /* Copy the address */ |
| memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE); |
| |
| /* Reconfig the beast */ |
| wv_82593_reconfig(dev); |
| |
| return 0; |
| } |
| #endif /* SET_MAC_ADDRESS */ |
| |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Frequency setting (for hardware able of it) |
| * It's a bit complicated and you don't really want to look into it... |
| */ |
| static int |
| wv_set_frequency(u_long base, /* i/o port of the card */ |
| iw_freq * frequency) |
| { |
| const int BAND_NUM = 10; /* Number of bands */ |
| long freq = 0L; /* offset to 2.4 GHz in .5 MHz */ |
| #ifdef DEBUG_IOCTL_INFO |
| int i; |
| #endif |
| |
| /* Setting by frequency */ |
| /* Theoritically, you may set any frequency between |
| * the two limits with a 0.5 MHz precision. In practice, |
| * I don't want you to have trouble with local |
| * regulations... */ |
| if((frequency->e == 1) && |
| (frequency->m >= (int) 2.412e8) && (frequency->m <= (int) 2.487e8)) |
| { |
| freq = ((frequency->m / 10000) - 24000L) / 5; |
| } |
| |
| /* Setting by channel (same as wfreqsel) */ |
| /* Warning : each channel is 22MHz wide, so some of the channels |
| * will interfere... */ |
| if((frequency->e == 0) && |
| (frequency->m >= 0) && (frequency->m < BAND_NUM)) |
| { |
| /* Get frequency offset. */ |
| freq = channel_bands[frequency->m] >> 1; |
| } |
| |
| /* Verify if the frequency is allowed */ |
| if(freq != 0L) |
| { |
| u_short table[10]; /* Authorized frequency table */ |
| |
| /* Read the frequency table */ |
| fee_read(base, 0x71 /* frequency table */, |
| table, 10); |
| |
| #ifdef DEBUG_IOCTL_INFO |
| printk(KERN_DEBUG "Frequency table :"); |
| for(i = 0; i < 10; i++) |
| { |
| printk(" %04X", |
| table[i]); |
| } |
| printk("\n"); |
| #endif |
| |
| /* Look in the table if the frequency is allowed */ |
| if(!(table[9 - ((freq - 24) / 16)] & |
| (1 << ((freq - 24) % 16)))) |
| return -EINVAL; /* not allowed */ |
| } |
| else |
| return -EINVAL; |
| |
| /* If we get a usable frequency */ |
| if(freq != 0L) |
| { |
| unsigned short area[16]; |
| unsigned short dac[2]; |
| unsigned short area_verify[16]; |
| unsigned short dac_verify[2]; |
| /* Corresponding gain (in the power adjust value table) |
| * see AT&T Wavelan Data Manual, REF 407-024689/E, page 3-8 |
| * & WCIN062D.DOC, page 6.2.9 */ |
| unsigned short power_limit[] = { 40, 80, 120, 160, 0 }; |
| int power_band = 0; /* Selected band */ |
| unsigned short power_adjust; /* Correct value */ |
| |
| /* Search for the gain */ |
| power_band = 0; |
| while((freq > power_limit[power_band]) && |
| (power_limit[++power_band] != 0)) |
| ; |
| |
| /* Read the first area */ |
| fee_read(base, 0x00, |
| area, 16); |
| |
| /* Read the DAC */ |
| fee_read(base, 0x60, |
| dac, 2); |
| |
| /* Read the new power adjust value */ |
| fee_read(base, 0x6B - (power_band >> 1), |
| &power_adjust, 1); |
| if(power_band & 0x1) |
| power_adjust >>= 8; |
| else |
| power_adjust &= 0xFF; |
| |
| #ifdef DEBUG_IOCTL_INFO |
| printk(KERN_DEBUG "Wavelan EEprom Area 1 :"); |
| for(i = 0; i < 16; i++) |
| { |
| printk(" %04X", |
| area[i]); |
| } |
| printk("\n"); |
| |
| printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n", |
| dac[0], dac[1]); |
| #endif |
| |
| /* Frequency offset (for info only...) */ |
| area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F); |
| |
| /* Receiver Principle main divider coefficient */ |
| area[3] = (freq >> 1) + 2400L - 352L; |
| area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); |
| |
| /* Transmitter Main divider coefficient */ |
| area[13] = (freq >> 1) + 2400L; |
| area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF); |
| |
| /* Others part of the area are flags, bit streams or unused... */ |
| |
| /* Set the value in the DAC */ |
| dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80); |
| dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF); |
| |
| /* Write the first area */ |
| fee_write(base, 0x00, |
| area, 16); |
| |
| /* Write the DAC */ |
| fee_write(base, 0x60, |
| dac, 2); |
| |
| /* We now should verify here that the EEprom writing was ok */ |
| |
| /* ReRead the first area */ |
| fee_read(base, 0x00, |
| area_verify, 16); |
| |
| /* ReRead the DAC */ |
| fee_read(base, 0x60, |
| dac_verify, 2); |
| |
| /* Compare */ |
| if(memcmp(area, area_verify, 16 * 2) || |
| memcmp(dac, dac_verify, 2 * 2)) |
| { |
| #ifdef DEBUG_IOCTL_ERROR |
| printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n"); |
| #endif |
| return -EOPNOTSUPP; |
| } |
| |
| /* We must download the frequency parameters to the |
| * synthetisers (from the EEprom - area 1) |
| * Note : as the EEprom is auto decremented, we set the end |
| * if the area... */ |
| mmc_out(base, mmwoff(0, mmw_fee_addr), 0x0F); |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), |
| MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); |
| |
| /* Wait until the download is finished */ |
| fee_wait(base, 100, 100); |
| |
| /* We must now download the power adjust value (gain) to |
| * the synthetisers (from the EEprom - area 7 - DAC) */ |
| mmc_out(base, mmwoff(0, mmw_fee_addr), 0x61); |
| mmc_out(base, mmwoff(0, mmw_fee_ctrl), |
| MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD); |
| |
| /* Wait until the download is finished */ |
| fee_wait(base, 100, 100); |
| |
| #ifdef DEBUG_IOCTL_INFO |
| /* Verification of what we have done... */ |
| |
| printk(KERN_DEBUG "Wavelan EEprom Area 1 :"); |
| for(i = 0; i < 16; i++) |
| { |
| printk(" %04X", |
| area_verify[i]); |
| } |
| printk("\n"); |
| |
| printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n", |
| dac_verify[0], dac_verify[1]); |
| #endif |
| |
| return 0; |
| } |
| else |
| return -EINVAL; /* Bah, never get there... */ |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Give the list of available frequencies |
| */ |
| static int |
| wv_frequency_list(u_long base, /* i/o port of the card */ |
| iw_freq * list, /* List of frequency to fill */ |
| int max) /* Maximum number of frequencies */ |
| { |
| u_short table[10]; /* Authorized frequency table */ |
| long freq = 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */ |
| int i; /* index in the table */ |
| const int BAND_NUM = 10; /* Number of bands */ |
| int c = 0; /* Channel number */ |
| |
| /* Read the frequency table */ |
| fee_read(base, 0x71 /* frequency table */, |
| table, 10); |
| |
| /* Look all frequencies */ |
| i = 0; |
| for(freq = 0; freq < 150; freq++) |
| /* Look in the table if the frequency is allowed */ |
| if(table[9 - (freq / 16)] & (1 << (freq % 16))) |
| { |
| /* Compute approximate channel number */ |
| while((((channel_bands[c] >> 1) - 24) < freq) && |
| (c < BAND_NUM)) |
| c++; |
| list[i].i = c; /* Set the list index */ |
| |
| /* put in the list */ |
| list[i].m = (((freq + 24) * 5) + 24000L) * 10000; |
| list[i++].e = 1; |
| |
| /* Check number */ |
| if(i >= max) |
| return(i); |
| } |
| |
| return(i); |
| } |
| |
| #ifdef IW_WIRELESS_SPY |
| /*------------------------------------------------------------------*/ |
| /* |
| * Gather wireless spy statistics : for each packet, compare the source |
| * address with out list, and if match, get the stats... |
| * Sorry, but this function really need wireless extensions... |
| */ |
| static inline void |
| wl_spy_gather(struct net_device * dev, |
| u_char * mac, /* MAC address */ |
| u_char * stats) /* Statistics to gather */ |
| { |
| struct iw_quality wstats; |
| |
| wstats.qual = stats[2] & MMR_SGNL_QUAL; |
| wstats.level = stats[0] & MMR_SIGNAL_LVL; |
| wstats.noise = stats[1] & MMR_SILENCE_LVL; |
| wstats.updated = 0x7; |
| |
| /* Update spy records */ |
| wireless_spy_update(dev, mac, &wstats); |
| } |
| #endif /* IW_WIRELESS_SPY */ |
| |
| #ifdef HISTOGRAM |
| /*------------------------------------------------------------------*/ |
| /* |
| * This function calculate an histogram on the signal level. |
| * As the noise is quite constant, it's like doing it on the SNR. |
| * We have defined a set of interval (lp->his_range), and each time |
| * the level goes in that interval, we increment the count (lp->his_sum). |
| * With this histogram you may detect if one wavelan is really weak, |
| * or you may also calculate the mean and standard deviation of the level... |
| */ |
| static inline void |
| wl_his_gather(struct net_device * dev, |
| u_char * stats) /* Statistics to gather */ |
| { |
| net_local * lp = netdev_priv(dev); |
| u_char level = stats[0] & MMR_SIGNAL_LVL; |
| int i; |
| |
| /* Find the correct interval */ |
| i = 0; |
| while((i < (lp->his_number - 1)) && (level >= lp->his_range[i++])) |
| ; |
| |
| /* Increment interval counter */ |
| (lp->his_sum[i])++; |
| } |
| #endif /* HISTOGRAM */ |
| |
| static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| strncpy(info->driver, "wavelan_cs", sizeof(info->driver)-1); |
| } |
| |
| static const struct ethtool_ops ops = { |
| .get_drvinfo = wl_get_drvinfo |
| }; |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get protocol name |
| */ |
| static int wavelan_get_name(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| strcpy(wrqu->name, "WaveLAN"); |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set NWID |
| */ |
| static int wavelan_set_nwid(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned int base = dev->base_addr; |
| net_local *lp = netdev_priv(dev); |
| psa_t psa; |
| mm_t m; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Set NWID in WaveLAN. */ |
| if (!wrqu->nwid.disabled) { |
| /* Set NWID in psa */ |
| psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8; |
| psa.psa_nwid[1] = wrqu->nwid.value & 0xFF; |
| psa.psa_nwid_select = 0x01; |
| psa_write(dev, |
| (char *) psa.psa_nwid - (char *) &psa, |
| (unsigned char *) psa.psa_nwid, 3); |
| |
| /* Set NWID in mmc. */ |
| m.w.mmw_netw_id_l = psa.psa_nwid[1]; |
| m.w.mmw_netw_id_h = psa.psa_nwid[0]; |
| mmc_write(base, |
| (char *) &m.w.mmw_netw_id_l - |
| (char *) &m, |
| (unsigned char *) &m.w.mmw_netw_id_l, 2); |
| mmc_out(base, mmwoff(0, mmw_loopt_sel), 0x00); |
| } else { |
| /* Disable NWID in the psa. */ |
| psa.psa_nwid_select = 0x00; |
| psa_write(dev, |
| (char *) &psa.psa_nwid_select - |
| (char *) &psa, |
| (unsigned char *) &psa.psa_nwid_select, |
| 1); |
| |
| /* Disable NWID in the mmc (no filtering). */ |
| mmc_out(base, mmwoff(0, mmw_loopt_sel), |
| MMW_LOOPT_SEL_DIS_NWID); |
| } |
| /* update the Wavelan checksum */ |
| update_psa_checksum(dev); |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get NWID |
| */ |
| static int wavelan_get_nwid(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| net_local *lp = netdev_priv(dev); |
| psa_t psa; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Read the NWID. */ |
| psa_read(dev, |
| (char *) psa.psa_nwid - (char *) &psa, |
| (unsigned char *) psa.psa_nwid, 3); |
| wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1]; |
| wrqu->nwid.disabled = !(psa.psa_nwid_select); |
| wrqu->nwid.fixed = 1; /* Superfluous */ |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set frequency |
| */ |
| static int wavelan_set_freq(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned int base = dev->base_addr; |
| net_local *lp = netdev_priv(dev); |
| unsigned long flags; |
| int ret; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ |
| if (!(mmc_in(base, mmroff(0, mmr_fee_status)) & |
| (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) |
| ret = wv_set_frequency(base, &(wrqu->freq)); |
| else |
| ret = -EOPNOTSUPP; |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get frequency |
| */ |
| static int wavelan_get_freq(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned int base = dev->base_addr; |
| net_local *lp = netdev_priv(dev); |
| psa_t psa; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). |
| * Does it work for everybody, especially old cards? */ |
| if (!(mmc_in(base, mmroff(0, mmr_fee_status)) & |
| (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { |
| unsigned short freq; |
| |
| /* Ask the EEPROM to read the frequency from the first area. */ |
| fee_read(base, 0x00, &freq, 1); |
| wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000; |
| wrqu->freq.e = 1; |
| } else { |
| psa_read(dev, |
| (char *) &psa.psa_subband - (char *) &psa, |
| (unsigned char *) &psa.psa_subband, 1); |
| |
| if (psa.psa_subband <= 4) { |
| wrqu->freq.m = fixed_bands[psa.psa_subband]; |
| wrqu->freq.e = (psa.psa_subband != 0); |
| } else |
| ret = -EOPNOTSUPP; |
| } |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set level threshold |
| */ |
| static int wavelan_set_sens(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned int base = dev->base_addr; |
| net_local *lp = netdev_priv(dev); |
| psa_t psa; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Set the level threshold. */ |
| /* We should complain loudly if wrqu->sens.fixed = 0, because we |
| * can't set auto mode... */ |
| psa.psa_thr_pre_set = wrqu->sens.value & 0x3F; |
| psa_write(dev, |
| (char *) &psa.psa_thr_pre_set - (char *) &psa, |
| (unsigned char *) &psa.psa_thr_pre_set, 1); |
| /* update the Wavelan checksum */ |
| update_psa_checksum(dev); |
| mmc_out(base, mmwoff(0, mmw_thr_pre_set), |
| psa.psa_thr_pre_set); |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get level threshold |
| */ |
| static int wavelan_get_sens(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| net_local *lp = netdev_priv(dev); |
| psa_t psa; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Read the level threshold. */ |
| psa_read(dev, |
| (char *) &psa.psa_thr_pre_set - (char *) &psa, |
| (unsigned char *) &psa.psa_thr_pre_set, 1); |
| wrqu->sens.value = psa.psa_thr_pre_set & 0x3F; |
| wrqu->sens.fixed = 1; |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set encryption key |
| */ |
| static int wavelan_set_encode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned int base = dev->base_addr; |
| net_local *lp = netdev_priv(dev); |
| unsigned long flags; |
| psa_t psa; |
| int ret = 0; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Check if capable of encryption */ |
| if (!mmc_encr(base)) { |
| ret = -EOPNOTSUPP; |
| } |
| |
| /* Check the size of the key */ |
| if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) { |
| ret = -EINVAL; |
| } |
| |
| if(!ret) { |
| /* Basic checking... */ |
| if (wrqu->encoding.length == 8) { |
| /* Copy the key in the driver */ |
| memcpy(psa.psa_encryption_key, extra, |
| wrqu->encoding.length); |
| psa.psa_encryption_select = 1; |
| |
| psa_write(dev, |
| (char *) &psa.psa_encryption_select - |
| (char *) &psa, |
| (unsigned char *) &psa. |
| psa_encryption_select, 8 + 1); |
| |
| mmc_out(base, mmwoff(0, mmw_encr_enable), |
| MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE); |
| mmc_write(base, mmwoff(0, mmw_encr_key), |
| (unsigned char *) &psa. |
| psa_encryption_key, 8); |
| } |
| |
| /* disable encryption */ |
| if (wrqu->encoding.flags & IW_ENCODE_DISABLED) { |
| psa.psa_encryption_select = 0; |
| psa_write(dev, |
| (char *) &psa.psa_encryption_select - |
| (char *) &psa, |
| (unsigned char *) &psa. |
| psa_encryption_select, 1); |
| |
| mmc_out(base, mmwoff(0, mmw_encr_enable), 0); |
| } |
| /* update the Wavelan checksum */ |
| update_psa_checksum(dev); |
| } |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get encryption key |
| */ |
| static int wavelan_get_encode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned int base = dev->base_addr; |
| net_local *lp = netdev_priv(dev); |
| psa_t psa; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Check if encryption is available */ |
| if (!mmc_encr(base)) { |
| ret = -EOPNOTSUPP; |
| } else { |
| /* Read the encryption key */ |
| psa_read(dev, |
| (char *) &psa.psa_encryption_select - |
| (char *) &psa, |
| (unsigned char *) &psa. |
| psa_encryption_select, 1 + 8); |
| |
| /* encryption is enabled ? */ |
| if (psa.psa_encryption_select) |
| wrqu->encoding.flags = IW_ENCODE_ENABLED; |
| else |
| wrqu->encoding.flags = IW_ENCODE_DISABLED; |
| wrqu->encoding.flags |= mmc_encr(base); |
| |
| /* Copy the key to the user buffer */ |
| wrqu->encoding.length = 8; |
| memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length); |
| } |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| #ifdef WAVELAN_ROAMING_EXT |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set ESSID (domain) |
| */ |
| static int wavelan_set_essid(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| net_local *lp = netdev_priv(dev); |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Check if disable */ |
| if(wrqu->data.flags == 0) |
| lp->filter_domains = 0; |
| else { |
| char essid[IW_ESSID_MAX_SIZE + 1]; |
| char * endp; |
| |
| /* Terminate the string */ |
| memcpy(essid, extra, wrqu->data.length); |
| essid[IW_ESSID_MAX_SIZE] = '\0'; |
| |
| #ifdef DEBUG_IOCTL_INFO |
| printk(KERN_DEBUG "SetEssid : ``%s''\n", essid); |
| #endif /* DEBUG_IOCTL_INFO */ |
| |
| /* Convert to a number (note : Wavelan specific) */ |
| lp->domain_id = simple_strtoul(essid, &endp, 16); |
| /* Has it worked ? */ |
| if(endp > essid) |
| lp->filter_domains = 1; |
| else { |
| lp->filter_domains = 0; |
| ret = -EINVAL; |
| } |
| } |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get ESSID (domain) |
| */ |
| static int wavelan_get_essid(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| net_local *lp = netdev_priv(dev); |
| |
| /* Is the domain ID active ? */ |
| wrqu->data.flags = lp->filter_domains; |
| |
| /* Copy Domain ID into a string (Wavelan specific) */ |
| /* Sound crazy, be we can't have a snprintf in the kernel !!! */ |
| sprintf(extra, "%lX", lp->domain_id); |
| extra[IW_ESSID_MAX_SIZE] = '\0'; |
| |
| /* Set the length */ |
| wrqu->data.length = strlen(extra); |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set AP address |
| */ |
| static int wavelan_set_wap(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| #ifdef DEBUG_IOCTL_INFO |
| printk(KERN_DEBUG "Set AP to : %pM\n", wrqu->ap_addr.sa_data); |
| #endif /* DEBUG_IOCTL_INFO */ |
| |
| return -EOPNOTSUPP; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get AP address |
| */ |
| static int wavelan_get_wap(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| /* Should get the real McCoy instead of own Ethernet address */ |
| memcpy(wrqu->ap_addr.sa_data, dev->dev_addr, WAVELAN_ADDR_SIZE); |
| wrqu->ap_addr.sa_family = ARPHRD_ETHER; |
| |
| return -EOPNOTSUPP; |
| } |
| #endif /* WAVELAN_ROAMING_EXT */ |
| |
| #ifdef WAVELAN_ROAMING |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : set mode |
| */ |
| static int wavelan_set_mode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| net_local *lp = netdev_priv(dev); |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Check mode */ |
| switch(wrqu->mode) { |
| case IW_MODE_ADHOC: |
| if(do_roaming) { |
| wv_roam_cleanup(dev); |
| do_roaming = 0; |
| } |
| break; |
| case IW_MODE_INFRA: |
| if(!do_roaming) { |
| wv_roam_init(dev); |
| do_roaming = 1; |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get mode |
| */ |
| static int wavelan_get_mode(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| if(do_roaming) |
| wrqu->mode = IW_MODE_INFRA; |
| else |
| wrqu->mode = IW_MODE_ADHOC; |
| |
| return 0; |
| } |
| #endif /* WAVELAN_ROAMING */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Handler : get range info |
| */ |
| static int wavelan_get_range(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned int base = dev->base_addr; |
| net_local *lp = netdev_priv(dev); |
| struct iw_range *range = (struct iw_range *) extra; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* Set the length (very important for backward compatibility) */ |
| wrqu->data.length = sizeof(struct iw_range); |
| |
| /* Set all the info we don't care or don't know about to zero */ |
| memset(range, 0, sizeof(struct iw_range)); |
| |
| /* Set the Wireless Extension versions */ |
| range->we_version_compiled = WIRELESS_EXT; |
| range->we_version_source = 9; |
| |
| /* Set information in the range struct. */ |
| range->throughput = 1.4 * 1000 * 1000; /* don't argue on this ! */ |
| range->min_nwid = 0x0000; |
| range->max_nwid = 0xFFFF; |
| |
| range->sensitivity = 0x3F; |
| range->max_qual.qual = MMR_SGNL_QUAL; |
| range->max_qual.level = MMR_SIGNAL_LVL; |
| range->max_qual.noise = MMR_SILENCE_LVL; |
| range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */ |
| /* Need to get better values for those two */ |
| range->avg_qual.level = 30; |
| range->avg_qual.noise = 8; |
| |
| range->num_bitrates = 1; |
| range->bitrate[0] = 2000000; /* 2 Mb/s */ |
| |
| /* Event capability (kernel + driver) */ |
| range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) | |
| IW_EVENT_CAPA_MASK(0x8B04) | |
| IW_EVENT_CAPA_MASK(0x8B06)); |
| range->event_capa[1] = IW_EVENT_CAPA_K_1; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */ |
| if (!(mmc_in(base, mmroff(0, mmr_fee_status)) & |
| (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) { |
| range->num_channels = 10; |
| range->num_frequency = wv_frequency_list(base, range->freq, |
| IW_MAX_FREQUENCIES); |
| } else |
| range->num_channels = range->num_frequency = 0; |
| |
| /* Encryption supported ? */ |
| if (mmc_encr(base)) { |
| range->encoding_size[0] = 8; /* DES = 64 bits key */ |
| range->num_encoding_sizes = 1; |
| range->max_encoding_tokens = 1; /* Only one key possible */ |
| } else { |
| range->num_encoding_sizes = 0; |
| range->max_encoding_tokens = 0; |
| } |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Private Handler : set quality threshold |
| */ |
| static int wavelan_set_qthr(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| unsigned int base = dev->base_addr; |
| net_local *lp = netdev_priv(dev); |
| psa_t psa; |
| unsigned long flags; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| psa.psa_quality_thr = *(extra) & 0x0F; |
| psa_write(dev, |
| (char *) &psa.psa_quality_thr - (char *) &psa, |
| (unsigned char *) &psa.psa_quality_thr, 1); |
| /* update the Wavelan checksum */ |
| update_psa_checksum(dev); |
| mmc_out(base, mmwoff(0, mmw_quality_thr), |
| psa.psa_quality_thr); |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Private Handler : get quality threshold |
| */ |
| static int wavelan_get_qthr(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| net_local *lp = netdev_priv(dev); |
| psa_t psa; |
| unsigned long flags; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| psa_read(dev, |
| (char *) &psa.psa_quality_thr - (char *) &psa, |
| (unsigned char *) &psa.psa_quality_thr, 1); |
| *(extra) = psa.psa_quality_thr & 0x0F; |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return 0; |
| } |
| |
| #ifdef WAVELAN_ROAMING |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Private Handler : set roaming |
| */ |
| static int wavelan_set_roam(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| net_local *lp = netdev_priv(dev); |
| unsigned long flags; |
| |
| /* Disable interrupts and save flags. */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Note : should check if user == root */ |
| if(do_roaming && (*extra)==0) |
| wv_roam_cleanup(dev); |
| else if(do_roaming==0 && (*extra)!=0) |
| wv_roam_init(dev); |
| |
| do_roaming = (*extra); |
| |
| /* Enable interrupts and restore flags. */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Private Handler : get quality threshold |
| */ |
| static int wavelan_get_roam(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| *(extra) = do_roaming; |
| |
| return 0; |
| } |
| #endif /* WAVELAN_ROAMING */ |
| |
| #ifdef HISTOGRAM |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Private Handler : set histogram |
| */ |
| static int wavelan_set_histo(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| net_local *lp = netdev_priv(dev); |
| |
| /* Check the number of intervals. */ |
| if (wrqu->data.length > 16) { |
| return(-E2BIG); |
| } |
| |
| /* Disable histo while we copy the addresses. |
| * As we don't disable interrupts, we need to do this */ |
| lp->his_number = 0; |
| |
| /* Are there ranges to copy? */ |
| if (wrqu->data.length > 0) { |
| /* Copy interval ranges to the driver */ |
| memcpy(lp->his_range, extra, wrqu->data.length); |
| |
| { |
| int i; |
| printk(KERN_DEBUG "Histo :"); |
| for(i = 0; i < wrqu->data.length; i++) |
| printk(" %d", lp->his_range[i]); |
| printk("\n"); |
| } |
| |
| /* Reset result structure. */ |
| memset(lp->his_sum, 0x00, sizeof(long) * 16); |
| } |
| |
| /* Now we can set the number of ranges */ |
| lp->his_number = wrqu->data.length; |
| |
| return(0); |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Wireless Private Handler : get histogram |
| */ |
| static int wavelan_get_histo(struct net_device *dev, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, |
| char *extra) |
| { |
| net_local *lp = netdev_priv(dev); |
| |
| /* Set the number of intervals. */ |
| wrqu->data.length = lp->his_number; |
| |
| /* Give back the distribution statistics */ |
| if(lp->his_number > 0) |
| memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number); |
| |
| return(0); |
| } |
| #endif /* HISTOGRAM */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Structures to export the Wireless Handlers |
| */ |
| |
| static const struct iw_priv_args wavelan_private_args[] = { |
| /*{ cmd, set_args, get_args, name } */ |
| { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" }, |
| { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" }, |
| { SIOCSIPROAM, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setroam" }, |
| { SIOCGIPROAM, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getroam" }, |
| { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16, 0, "sethisto" }, |
| { SIOCGIPHISTO, 0, IW_PRIV_TYPE_INT | 16, "gethisto" }, |
| }; |
| |
| static const iw_handler wavelan_handler[] = |
| { |
| NULL, /* SIOCSIWNAME */ |
| wavelan_get_name, /* SIOCGIWNAME */ |
| wavelan_set_nwid, /* SIOCSIWNWID */ |
| wavelan_get_nwid, /* SIOCGIWNWID */ |
| wavelan_set_freq, /* SIOCSIWFREQ */ |
| wavelan_get_freq, /* SIOCGIWFREQ */ |
| #ifdef WAVELAN_ROAMING |
| wavelan_set_mode, /* SIOCSIWMODE */ |
| wavelan_get_mode, /* SIOCGIWMODE */ |
| #else /* WAVELAN_ROAMING */ |
| NULL, /* SIOCSIWMODE */ |
| NULL, /* SIOCGIWMODE */ |
| #endif /* WAVELAN_ROAMING */ |
| wavelan_set_sens, /* SIOCSIWSENS */ |
| wavelan_get_sens, /* SIOCGIWSENS */ |
| NULL, /* SIOCSIWRANGE */ |
| wavelan_get_range, /* SIOCGIWRANGE */ |
| NULL, /* SIOCSIWPRIV */ |
| NULL, /* SIOCGIWPRIV */ |
| NULL, /* SIOCSIWSTATS */ |
| NULL, /* SIOCGIWSTATS */ |
| iw_handler_set_spy, /* SIOCSIWSPY */ |
| iw_handler_get_spy, /* SIOCGIWSPY */ |
| iw_handler_set_thrspy, /* SIOCSIWTHRSPY */ |
| iw_handler_get_thrspy, /* SIOCGIWTHRSPY */ |
| #ifdef WAVELAN_ROAMING_EXT |
| wavelan_set_wap, /* SIOCSIWAP */ |
| wavelan_get_wap, /* SIOCGIWAP */ |
| NULL, /* -- hole -- */ |
| NULL, /* SIOCGIWAPLIST */ |
| NULL, /* -- hole -- */ |
| NULL, /* -- hole -- */ |
| wavelan_set_essid, /* SIOCSIWESSID */ |
| wavelan_get_essid, /* SIOCGIWESSID */ |
| #else /* WAVELAN_ROAMING_EXT */ |
| NULL, /* SIOCSIWAP */ |
| NULL, /* SIOCGIWAP */ |
| NULL, /* -- hole -- */ |
| NULL, /* SIOCGIWAPLIST */ |
| NULL, /* -- hole -- */ |
| NULL, /* -- hole -- */ |
| NULL, /* SIOCSIWESSID */ |
| NULL, /* SIOCGIWESSID */ |
| #endif /* WAVELAN_ROAMING_EXT */ |
| NULL, /* SIOCSIWNICKN */ |
| NULL, /* SIOCGIWNICKN */ |
| NULL, /* -- hole -- */ |
| NULL, /* -- hole -- */ |
| NULL, /* SIOCSIWRATE */ |
| NULL, /* SIOCGIWRATE */ |
| NULL, /* SIOCSIWRTS */ |
| NULL, /* SIOCGIWRTS */ |
| NULL, /* SIOCSIWFRAG */ |
| NULL, /* SIOCGIWFRAG */ |
| NULL, /* SIOCSIWTXPOW */ |
| NULL, /* SIOCGIWTXPOW */ |
| NULL, /* SIOCSIWRETRY */ |
| NULL, /* SIOCGIWRETRY */ |
| wavelan_set_encode, /* SIOCSIWENCODE */ |
| wavelan_get_encode, /* SIOCGIWENCODE */ |
| }; |
| |
| static const iw_handler wavelan_private_handler[] = |
| { |
| wavelan_set_qthr, /* SIOCIWFIRSTPRIV */ |
| wavelan_get_qthr, /* SIOCIWFIRSTPRIV + 1 */ |
| #ifdef WAVELAN_ROAMING |
| wavelan_set_roam, /* SIOCIWFIRSTPRIV + 2 */ |
| wavelan_get_roam, /* SIOCIWFIRSTPRIV + 3 */ |
| #else /* WAVELAN_ROAMING */ |
| NULL, /* SIOCIWFIRSTPRIV + 2 */ |
| NULL, /* SIOCIWFIRSTPRIV + 3 */ |
| #endif /* WAVELAN_ROAMING */ |
| #ifdef HISTOGRAM |
| wavelan_set_histo, /* SIOCIWFIRSTPRIV + 4 */ |
| wavelan_get_histo, /* SIOCIWFIRSTPRIV + 5 */ |
| #endif /* HISTOGRAM */ |
| }; |
| |
| static const struct iw_handler_def wavelan_handler_def = |
| { |
| .num_standard = ARRAY_SIZE(wavelan_handler), |
| .num_private = ARRAY_SIZE(wavelan_private_handler), |
| .num_private_args = ARRAY_SIZE(wavelan_private_args), |
| .standard = wavelan_handler, |
| .private = wavelan_private_handler, |
| .private_args = wavelan_private_args, |
| .get_wireless_stats = wavelan_get_wireless_stats, |
| }; |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Get wireless statistics |
| * Called by /proc/net/wireless... |
| */ |
| static iw_stats * |
| wavelan_get_wireless_stats(struct net_device * dev) |
| { |
| unsigned int base = dev->base_addr; |
| net_local * lp = netdev_priv(dev); |
| mmr_t m; |
| iw_stats * wstats; |
| unsigned long flags; |
| |
| #ifdef DEBUG_IOCTL_TRACE |
| printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name); |
| #endif |
| |
| /* Disable interrupts & save flags */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| wstats = &lp->wstats; |
| |
| /* Get data from the mmc */ |
| mmc_out(base, mmwoff(0, mmw_freeze), 1); |
| |
| mmc_read(base, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1); |
| mmc_read(base, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, 2); |
| mmc_read(base, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, 4); |
| |
| mmc_out(base, mmwoff(0, mmw_freeze), 0); |
| |
| /* Copy data to wireless stuff */ |
| wstats->status = m.mmr_dce_status & MMR_DCE_STATUS; |
| wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL; |
| wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL; |
| wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL; |
| wstats->qual.updated = (((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) | |
| ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) | |
| ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5)); |
| wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l; |
| wstats->discard.code = 0L; |
| wstats->discard.misc = 0L; |
| |
| /* ReEnable interrupts & restore flags */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| #ifdef DEBUG_IOCTL_TRACE |
| printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name); |
| #endif |
| return &lp->wstats; |
| } |
| |
| /************************* PACKET RECEPTION *************************/ |
| /* |
| * This part deal with receiving the packets. |
| * The interrupt handler get an interrupt when a packet has been |
| * successfully received and called this part... |
| */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Calculate the starting address of the frame pointed to by the receive |
| * frame pointer and verify that the frame seem correct |
| * (called by wv_packet_rcv()) |
| */ |
| static int |
| wv_start_of_frame(struct net_device * dev, |
| int rfp, /* end of frame */ |
| int wrap) /* start of buffer */ |
| { |
| unsigned int base = dev->base_addr; |
| int rp; |
| int len; |
| |
| rp = (rfp - 5 + RX_SIZE) % RX_SIZE; |
| outb(rp & 0xff, PIORL(base)); |
| outb(((rp >> 8) & PIORH_MASK), PIORH(base)); |
| len = inb(PIOP(base)); |
| len |= inb(PIOP(base)) << 8; |
| |
| /* Sanity checks on size */ |
| /* Frame too big */ |
| if(len > MAXDATAZ + 100) |
| { |
| #ifdef DEBUG_RX_ERROR |
| printk(KERN_INFO "%s: wv_start_of_frame: Received frame too large, rfp %d len 0x%x\n", |
| dev->name, rfp, len); |
| #endif |
| return(-1); |
| } |
| |
| /* Frame too short */ |
| if(len < 7) |
| { |
| #ifdef DEBUG_RX_ERROR |
| printk(KERN_INFO "%s: wv_start_of_frame: Received null frame, rfp %d len 0x%x\n", |
| dev->name, rfp, len); |
| #endif |
| return(-1); |
| } |
| |
| /* Wrap around buffer */ |
| if(len > ((wrap - (rfp - len) + RX_SIZE) % RX_SIZE)) /* magic formula ! */ |
| { |
| #ifdef DEBUG_RX_ERROR |
| printk(KERN_INFO "%s: wv_start_of_frame: wrap around buffer, wrap %d rfp %d len 0x%x\n", |
| dev->name, wrap, rfp, len); |
| #endif |
| return(-1); |
| } |
| |
| return((rp - len + RX_SIZE) % RX_SIZE); |
| } /* wv_start_of_frame */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This routine does the actual copy of data (including the ethernet |
| * header structure) from the WaveLAN card to an sk_buff chain that |
| * will be passed up to the network interface layer. NOTE: We |
| * currently don't handle trailer protocols (neither does the rest of |
| * the network interface), so if that is needed, it will (at least in |
| * part) be added here. The contents of the receive ring buffer are |
| * copied to a message chain that is then passed to the kernel. |
| * |
| * Note: if any errors occur, the packet is "dropped on the floor" |
| * (called by wv_packet_rcv()) |
| */ |
| static void |
| wv_packet_read(struct net_device * dev, |
| int fd_p, |
| int sksize) |
| { |
| net_local * lp = netdev_priv(dev); |
| struct sk_buff * skb; |
| |
| #ifdef DEBUG_RX_TRACE |
| printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n", |
| dev->name, fd_p, sksize); |
| #endif |
| |
| /* Allocate some buffer for the new packet */ |
| if((skb = dev_alloc_skb(sksize+2)) == (struct sk_buff *) NULL) |
| { |
| #ifdef DEBUG_RX_ERROR |
| printk(KERN_INFO "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC)\n", |
| dev->name, sksize); |
| #endif |
| dev->stats.rx_dropped++; |
| /* |
| * Not only do we want to return here, but we also need to drop the |
| * packet on the floor to clear the interrupt. |
| */ |
| return; |
| } |
| |
| skb_reserve(skb, 2); |
| fd_p = read_ringbuf(dev, fd_p, (char *) skb_put(skb, sksize), sksize); |
| skb->protocol = eth_type_trans(skb, dev); |
| |
| #ifdef DEBUG_RX_INFO |
| wv_packet_info(skb_mac_header(skb), sksize, dev->name, "wv_packet_read"); |
| #endif /* DEBUG_RX_INFO */ |
| |
| /* Statistics gathering & stuff associated. |
| * It seem a bit messy with all the define, but it's really simple... */ |
| if( |
| #ifdef IW_WIRELESS_SPY |
| (lp->spy_data.spy_number > 0) || |
| #endif /* IW_WIRELESS_SPY */ |
| #ifdef HISTOGRAM |
| (lp->his_number > 0) || |
| #endif /* HISTOGRAM */ |
| #ifdef WAVELAN_ROAMING |
| (do_roaming) || |
| #endif /* WAVELAN_ROAMING */ |
| 0) |
| { |
| u_char stats[3]; /* Signal level, Noise level, Signal quality */ |
| |
| /* read signal level, silence level and signal quality bytes */ |
| fd_p = read_ringbuf(dev, (fd_p + 4) % RX_SIZE + RX_BASE, |
| stats, 3); |
| #ifdef DEBUG_RX_INFO |
| printk(KERN_DEBUG "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n", |
| dev->name, stats[0] & 0x3F, stats[1] & 0x3F, stats[2] & 0x0F); |
| #endif |
| |
| #ifdef WAVELAN_ROAMING |
| if(do_roaming) |
| if(WAVELAN_BEACON(skb->data)) |
| wl_roam_gather(dev, skb->data, stats); |
| #endif /* WAVELAN_ROAMING */ |
| |
| #ifdef WIRELESS_SPY |
| wl_spy_gather(dev, skb_mac_header(skb) + WAVELAN_ADDR_SIZE, stats); |
| #endif /* WIRELESS_SPY */ |
| #ifdef HISTOGRAM |
| wl_his_gather(dev, stats); |
| #endif /* HISTOGRAM */ |
| } |
| |
| /* |
| * Hand the packet to the Network Module |
| */ |
| netif_rx(skb); |
| |
| /* Keep stats up to date */ |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += sksize; |
| |
| #ifdef DEBUG_RX_TRACE |
| printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name); |
| #endif |
| return; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This routine is called by the interrupt handler to initiate a |
| * packet transfer from the card to the network interface layer above |
| * this driver. This routine checks if a buffer has been successfully |
| * received by the WaveLAN card. If so, the routine wv_packet_read is |
| * called to do the actual transfer of the card's data including the |
| * ethernet header into a packet consisting of an sk_buff chain. |
| * (called by wavelan_interrupt()) |
| * Note : the spinlock is already grabbed for us and irq are disabled. |
| */ |
| static void |
| wv_packet_rcv(struct net_device * dev) |
| { |
| unsigned int base = dev->base_addr; |
| net_local * lp = netdev_priv(dev); |
| int newrfp; |
| int rp; |
| int len; |
| int f_start; |
| int status; |
| int i593_rfp; |
| int stat_ptr; |
| u_char c[4]; |
| |
| #ifdef DEBUG_RX_TRACE |
| printk(KERN_DEBUG "%s: ->wv_packet_rcv()\n", dev->name); |
| #endif |
| |
| /* Get the new receive frame pointer from the i82593 chip */ |
| outb(CR0_STATUS_2 | OP0_NOP, LCCR(base)); |
| i593_rfp = inb(LCSR(base)); |
| i593_rfp |= inb(LCSR(base)) << 8; |
| i593_rfp %= RX_SIZE; |
| |
| /* Get the new receive frame pointer from the WaveLAN card. |
| * It is 3 bytes more than the increment of the i82593 receive |
| * frame pointer, for each packet. This is because it includes the |
| * 3 roaming bytes added by the mmc. |
| */ |
| newrfp = inb(RPLL(base)); |
| newrfp |= inb(RPLH(base)) << 8; |
| newrfp %= RX_SIZE; |
| |
| #ifdef DEBUG_RX_INFO |
| printk(KERN_DEBUG "%s: wv_packet_rcv(): i593_rfp %d stop %d newrfp %d lp->rfp %d\n", |
| dev->name, i593_rfp, lp->stop, newrfp, lp->rfp); |
| #endif |
| |
| #ifdef DEBUG_RX_ERROR |
| /* If no new frame pointer... */ |
| if(lp->overrunning || newrfp == lp->rfp) |
| printk(KERN_INFO "%s: wv_packet_rcv(): no new frame: i593_rfp %d stop %d newrfp %d lp->rfp %d\n", |
| dev->name, i593_rfp, lp->stop, newrfp, lp->rfp); |
| #endif |
| |
| /* Read all frames (packets) received */ |
| while(newrfp != lp->rfp) |
| { |
| /* A frame is composed of the packet, followed by a status word, |
| * the length of the frame (word) and the mmc info (SNR & qual). |
| * It's because the length is at the end that we can only scan |
| * frames backward. */ |
| |
| /* Find the first frame by skipping backwards over the frames */ |
| rp = newrfp; /* End of last frame */ |
| while(((f_start = wv_start_of_frame(dev, rp, newrfp)) != lp->rfp) && |
| (f_start != -1)) |
| rp = f_start; |
| |
| /* If we had a problem */ |
| if(f_start == -1) |
| { |
| #ifdef DEBUG_RX_ERROR |
| printk(KERN_INFO "wavelan_cs: cannot find start of frame "); |
| printk(" i593_rfp %d stop %d newrfp %d lp->rfp %d\n", |
| i593_rfp, lp->stop, newrfp, lp->rfp); |
| #endif |
| lp->rfp = rp; /* Get to the last usable frame */ |
| continue; |
| } |
| |
| /* f_start point to the beggining of the first frame received |
| * and rp to the beggining of the next one */ |
| |
| /* Read status & length of the frame */ |
| stat_ptr = (rp - 7 + RX_SIZE) % RX_SIZE; |
| stat_ptr = read_ringbuf(dev, stat_ptr, c, 4); |
| status = c[0] | (c[1] << 8); |
| len = c[2] | (c[3] << 8); |
| |
| /* Check status */ |
| if((status & RX_RCV_OK) != RX_RCV_OK) |
| { |
| dev->stats.rx_errors++; |
| if(status & RX_NO_SFD) |
| dev->stats.rx_frame_errors++; |
| if(status & RX_CRC_ERR) |
| dev->stats.rx_crc_errors++; |
| if(status & RX_OVRRUN) |
| dev->stats.rx_over_errors++; |
| |
| #ifdef DEBUG_RX_FAIL |
| printk(KERN_DEBUG "%s: wv_packet_rcv(): packet not received ok, status = 0x%x\n", |
| dev->name, status); |
| #endif |
| } |
| else |
| /* Read the packet and transmit to Linux */ |
| wv_packet_read(dev, f_start, len - 2); |
| |
| /* One frame has been processed, skip it */ |
| lp->rfp = rp; |
| } |
| |
| /* |
| * Update the frame stop register, but set it to less than |
| * the full 8K to allow space for 3 bytes of signal strength |
| * per packet. |
| */ |
| lp->stop = (i593_rfp + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE; |
| outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base)); |
| outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base)); |
| outb(OP1_SWIT_TO_PORT_0, LCCR(base)); |
| |
| #ifdef DEBUG_RX_TRACE |
| printk(KERN_DEBUG "%s: <-wv_packet_rcv()\n", dev->name); |
| #endif |
| } |
| |
| /*********************** PACKET TRANSMISSION ***********************/ |
| /* |
| * This part deal with sending packet through the wavelan |
| * We copy the packet to the send buffer and then issue the send |
| * command to the i82593. The result of this operation will be |
| * checked in wavelan_interrupt() |
| */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This routine fills in the appropriate registers and memory |
| * locations on the WaveLAN card and starts the card off on |
| * the transmit. |
| * (called in wavelan_packet_xmit()) |
| */ |
| static void |
| wv_packet_write(struct net_device * dev, |
| void * buf, |
| short length) |
| { |
| net_local * lp = netdev_priv(dev); |
| unsigned int base = dev->base_addr; |
| unsigned long flags; |
| int clen = length; |
| register u_short xmtdata_base = TX_BASE; |
| |
| #ifdef DEBUG_TX_TRACE |
| printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length); |
| #endif |
| |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Write the length of data buffer followed by the buffer */ |
| outb(xmtdata_base & 0xff, PIORL(base)); |
| outb(((xmtdata_base >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); |
| outb(clen & 0xff, PIOP(base)); /* lsb */ |
| outb(clen >> 8, PIOP(base)); /* msb */ |
| |
| /* Send the data */ |
| outsb(PIOP(base), buf, clen); |
| |
| /* Indicate end of transmit chain */ |
| outb(OP0_NOP, PIOP(base)); |
| /* josullvn@cs.cmu.edu: need to send a second NOP for alignment... */ |
| outb(OP0_NOP, PIOP(base)); |
| |
| /* Reset the transmit DMA pointer */ |
| hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); |
| hacr_write(base, HACR_DEFAULT); |
| /* Send the transmit command */ |
| wv_82593_cmd(dev, "wv_packet_write(): transmit", |
| OP0_TRANSMIT, SR0_NO_RESULT); |
| |
| /* Make sure the watchdog will keep quiet for a while */ |
| dev->trans_start = jiffies; |
| |
| /* Keep stats up to date */ |
| dev->stats.tx_bytes += length; |
| |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| #ifdef DEBUG_TX_INFO |
| wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write"); |
| #endif /* DEBUG_TX_INFO */ |
| |
| #ifdef DEBUG_TX_TRACE |
| printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name); |
| #endif |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This routine is called when we want to send a packet (NET3 callback) |
| * In this routine, we check if the harware is ready to accept |
| * the packet. We also prevent reentrance. Then, we call the function |
| * to send the packet... |
| */ |
| static netdev_tx_t |
| wavelan_packet_xmit(struct sk_buff * skb, |
| struct net_device * dev) |
| { |
| net_local * lp = netdev_priv(dev); |
| unsigned long flags; |
| |
| #ifdef DEBUG_TX_TRACE |
| printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name, |
| (unsigned) skb); |
| #endif |
| |
| /* |
| * Block a timer-based transmit from overlapping a previous transmit. |
| * In other words, prevent reentering this routine. |
| */ |
| netif_stop_queue(dev); |
| |
| /* If somebody has asked to reconfigure the controller, |
| * we can do it now */ |
| if(lp->reconfig_82593) |
| { |
| spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */ |
| wv_82593_config(dev); |
| spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */ |
| /* Note : the configure procedure was totally synchronous, |
| * so the Tx buffer is now free */ |
| } |
| |
| /* Check if we need some padding */ |
| /* Note : on wireless the propagation time is in the order of 1us, |
| * and we don't have the Ethernet specific requirement of beeing |
| * able to detect collisions, therefore in theory we don't really |
| * need to pad. Jean II */ |
| if (skb_padto(skb, ETH_ZLEN)) |
| return NETDEV_TX_OK; |
| |
| wv_packet_write(dev, skb->data, skb->len); |
| |
| dev_kfree_skb(skb); |
| |
| #ifdef DEBUG_TX_TRACE |
| printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name); |
| #endif |
| return NETDEV_TX_OK; |
| } |
| |
| /********************** HARDWARE CONFIGURATION **********************/ |
| /* |
| * This part do the real job of starting and configuring the hardware. |
| */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Routine to initialize the Modem Management Controller. |
| * (called by wv_hw_config()) |
| */ |
| static int |
| wv_mmc_init(struct net_device * dev) |
| { |
| unsigned int base = dev->base_addr; |
| psa_t psa; |
| mmw_t m; |
| int configured; |
| int i; /* Loop counter */ |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name); |
| #endif |
| |
| /* Read the parameter storage area */ |
| psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); |
| |
| /* |
| * Check the first three octets of the MAC addr for the manufacturer's code. |
| * Note: If you get the error message below, you've got a |
| * non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on |
| * how to configure your card... |
| */ |
| for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++) |
| if ((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) && |
| (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) && |
| (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2])) |
| break; |
| |
| /* If we have not found it... */ |
| if (i == ARRAY_SIZE(MAC_ADDRESSES)) |
| { |
| #ifdef DEBUG_CONFIG_ERRORS |
| printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n", |
| dev->name, psa.psa_univ_mac_addr[0], |
| psa.psa_univ_mac_addr[1], psa.psa_univ_mac_addr[2]); |
| #endif |
| return FALSE; |
| } |
| |
| /* Get the MAC address */ |
| memcpy(&dev->dev_addr[0], &psa.psa_univ_mac_addr[0], WAVELAN_ADDR_SIZE); |
| |
| #ifdef USE_PSA_CONFIG |
| configured = psa.psa_conf_status & 1; |
| #else |
| configured = 0; |
| #endif |
| |
| /* Is the PSA is not configured */ |
| if(!configured) |
| { |
| /* User will be able to configure NWID after (with iwconfig) */ |
| psa.psa_nwid[0] = 0; |
| psa.psa_nwid[1] = 0; |
| |
| /* As NWID is not set : no NWID checking */ |
| psa.psa_nwid_select = 0; |
| |
| /* Disable encryption */ |
| psa.psa_encryption_select = 0; |
| |
| /* Set to standard values |
| * 0x04 for AT, |
| * 0x01 for MCA, |
| * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document) |
| */ |
| if (psa.psa_comp_number & 1) |
| psa.psa_thr_pre_set = 0x01; |
| else |
| psa.psa_thr_pre_set = 0x04; |
| psa.psa_quality_thr = 0x03; |
| |
| /* It is configured */ |
| psa.psa_conf_status |= 1; |
| |
| #ifdef USE_PSA_CONFIG |
| /* Write the psa */ |
| psa_write(dev, (char *)psa.psa_nwid - (char *)&psa, |
| (unsigned char *)psa.psa_nwid, 4); |
| psa_write(dev, (char *)&psa.psa_thr_pre_set - (char *)&psa, |
| (unsigned char *)&psa.psa_thr_pre_set, 1); |
| psa_write(dev, (char *)&psa.psa_quality_thr - (char *)&psa, |
| (unsigned char *)&psa.psa_quality_thr, 1); |
| psa_write(dev, (char *)&psa.psa_conf_status - (char *)&psa, |
| (unsigned char *)&psa.psa_conf_status, 1); |
| /* update the Wavelan checksum */ |
| update_psa_checksum(dev); |
| #endif /* USE_PSA_CONFIG */ |
| } |
| |
| /* Zero the mmc structure */ |
| memset(&m, 0x00, sizeof(m)); |
| |
| /* Copy PSA info to the mmc */ |
| m.mmw_netw_id_l = psa.psa_nwid[1]; |
| m.mmw_netw_id_h = psa.psa_nwid[0]; |
| |
| if(psa.psa_nwid_select & 1) |
| m.mmw_loopt_sel = 0x00; |
| else |
| m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID; |
| |
| memcpy(&m.mmw_encr_key, &psa.psa_encryption_key, |
| sizeof(m.mmw_encr_key)); |
| |
| if(psa.psa_encryption_select) |
| m.mmw_encr_enable = MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE; |
| else |
| m.mmw_encr_enable = 0; |
| |
| m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F; |
| m.mmw_quality_thr = psa.psa_quality_thr & 0x0F; |
| |
| /* |
| * Set default modem control parameters. |
| * See NCR document 407-0024326 Rev. A. |
| */ |
| m.mmw_jabber_enable = 0x01; |
| m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN; |
| m.mmw_ifs = 0x20; |
| m.mmw_mod_delay = 0x04; |
| m.mmw_jam_time = 0x38; |
| |
| m.mmw_des_io_invert = 0; |
| m.mmw_freeze = 0; |
| m.mmw_decay_prm = 0; |
| m.mmw_decay_updat_prm = 0; |
| |
| /* Write all info to mmc */ |
| mmc_write(base, 0, (u_char *)&m, sizeof(m)); |
| |
| /* The following code start the modem of the 2.00 frequency |
| * selectable cards at power on. It's not strictly needed for the |
| * following boots... |
| * The original patch was by Joe Finney for the PCMCIA driver, but |
| * I've cleaned it a bit and add documentation. |
| * Thanks to Loeke Brederveld from Lucent for the info. |
| */ |
| |
| /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable) |
| * (does it work for everybody ? - especially old cards...) */ |
| /* Note : WFREQSEL verify that it is able to read from EEprom |
| * a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID |
| * is 0xA (Xilinx version) or 0xB (Ariadne version). |
| * My test is more crude but do work... */ |
| if(!(mmc_in(base, mmroff(0, mmr_fee_status)) & |
| (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) |
| { |
| /* We must download the frequency parameters to the |
| * synthetisers (from the EEprom - area 1) |
| * Note : as the EEprom is auto decremented, we set the end |
| * if the area... */ |
| m.mmw_fee_addr = 0x0F; |
| m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; |
| mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m, |
| (unsigned char *)&m.mmw_fee_ctrl, 2); |
| |
| /* Wait until the download is finished */ |
| fee_wait(base, 100, 100); |
| |
| #ifdef DEBUG_CONFIG_INFO |
| /* The frequency was in the last word downloaded... */ |
| mmc_read(base, (char *)&m.mmw_fee_data_l - (char *)&m, |
| (unsigned char *)&m.mmw_fee_data_l, 2); |
| |
| /* Print some info for the user */ |
| printk(KERN_DEBUG "%s: Wavelan 2.00 recognised (frequency select) : Current frequency = %ld\n", |
| dev->name, |
| ((m.mmw_fee_data_h << 4) | |
| (m.mmw_fee_data_l >> 4)) * 5 / 2 + 24000L); |
| #endif |
| |
| /* We must now download the power adjust value (gain) to |
| * the synthetisers (from the EEprom - area 7 - DAC) */ |
| m.mmw_fee_addr = 0x61; |
| m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD; |
| mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m, |
| (unsigned char *)&m.mmw_fee_ctrl, 2); |
| |
| /* Wait until the download is finished */ |
| } /* if 2.00 card */ |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name); |
| #endif |
| return TRUE; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Routine to gracefully turn off reception, and wait for any commands |
| * to complete. |
| * (called in wv_ru_start() and wavelan_close() and wavelan_event()) |
| */ |
| static int |
| wv_ru_stop(struct net_device * dev) |
| { |
| unsigned int base = dev->base_addr; |
| net_local * lp = netdev_priv(dev); |
| unsigned long flags; |
| int status; |
| int spin; |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name); |
| #endif |
| |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* First, send the LAN controller a stop receive command */ |
| wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv", |
| OP0_STOP_RCV, SR0_NO_RESULT); |
| |
| /* Then, spin until the receive unit goes idle */ |
| spin = 300; |
| do |
| { |
| udelay(10); |
| outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); |
| status = inb(LCSR(base)); |
| } |
| while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0)); |
| |
| /* Now, spin until the chip finishes executing its current command */ |
| do |
| { |
| udelay(10); |
| outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); |
| status = inb(LCSR(base)); |
| } |
| while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0)); |
| |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| /* If there was a problem */ |
| if(spin <= 0) |
| { |
| #ifdef DEBUG_CONFIG_ERRORS |
| printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n", |
| dev->name); |
| #endif |
| return FALSE; |
| } |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: <-wv_ru_stop()\n", dev->name); |
| #endif |
| return TRUE; |
| } /* wv_ru_stop */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This routine starts the receive unit running. First, it checks if |
| * the card is actually ready. Then the card is instructed to receive |
| * packets again. |
| * (called in wv_hw_reset() & wavelan_open()) |
| */ |
| static int |
| wv_ru_start(struct net_device * dev) |
| { |
| unsigned int base = dev->base_addr; |
| net_local * lp = netdev_priv(dev); |
| unsigned long flags; |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name); |
| #endif |
| |
| /* |
| * We need to start from a quiescent state. To do so, we could check |
| * if the card is already running, but instead we just try to shut |
| * it down. First, we disable reception (in case it was already enabled). |
| */ |
| if(!wv_ru_stop(dev)) |
| return FALSE; |
| |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Now we know that no command is being executed. */ |
| |
| /* Set the receive frame pointer and stop pointer */ |
| lp->rfp = 0; |
| outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base)); |
| |
| /* Reset ring management. This sets the receive frame pointer to 1 */ |
| outb(OP1_RESET_RING_MNGMT, LCCR(base)); |
| |
| #if 0 |
| /* XXX the i82593 manual page 6-4 seems to indicate that the stop register |
| should be set as below */ |
| /* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/ |
| #elif 0 |
| /* but I set it 0 instead */ |
| lp->stop = 0; |
| #else |
| /* but I set it to 3 bytes per packet less than 8K */ |
| lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE; |
| #endif |
| outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base)); |
| outb(OP1_INT_ENABLE, LCCR(base)); |
| outb(OP1_SWIT_TO_PORT_0, LCCR(base)); |
| |
| /* Reset receive DMA pointer */ |
| hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); |
| hacr_write_slow(base, HACR_DEFAULT); |
| |
| /* Receive DMA on channel 1 */ |
| wv_82593_cmd(dev, "wv_ru_start(): rcv-enable", |
| CR0_CHNL | OP0_RCV_ENABLE, SR0_NO_RESULT); |
| |
| #ifdef DEBUG_I82593_SHOW |
| { |
| int status; |
| int opri; |
| int spin = 10000; |
| |
| /* spin until the chip starts receiving */ |
| do |
| { |
| outb(OP0_NOP | CR0_STATUS_3, LCCR(base)); |
| status = inb(LCSR(base)); |
| if(spin-- <= 0) |
| break; |
| } |
| while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) && |
| ((status & SR3_RCV_STATE_MASK) != SR3_RCV_READY)); |
| printk(KERN_DEBUG "rcv status is 0x%x [i:%d]\n", |
| (status & SR3_RCV_STATE_MASK), i); |
| } |
| #endif |
| |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name); |
| #endif |
| return TRUE; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This routine does a standard config of the WaveLAN controller (i82593). |
| * In the ISA driver, this is integrated in wavelan_hardware_reset() |
| * (called by wv_hw_config(), wv_82593_reconfig() & wavelan_packet_xmit()) |
| */ |
| static int |
| wv_82593_config(struct net_device * dev) |
| { |
| unsigned int base = dev->base_addr; |
| net_local * lp = netdev_priv(dev); |
| struct i82593_conf_block cfblk; |
| int ret = TRUE; |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name); |
| #endif |
| |
| /* Create & fill i82593 config block |
| * |
| * Now conform to Wavelan document WCIN085B |
| */ |
| memset(&cfblk, 0x00, sizeof(struct i82593_conf_block)); |
| cfblk.d6mod = FALSE; /* Run in i82593 advanced mode */ |
| cfblk.fifo_limit = 5; /* = 56 B rx and 40 B tx fifo thresholds */ |
| cfblk.forgnesi = FALSE; /* 0=82C501, 1=AMD7992B compatibility */ |
| cfblk.fifo_32 = 1; |
| cfblk.throttle_enb = FALSE; |
| cfblk.contin = TRUE; /* enable continuous mode */ |
| cfblk.cntrxint = FALSE; /* enable continuous mode receive interrupts */ |
| cfblk.addr_len = WAVELAN_ADDR_SIZE; |
| cfblk.acloc = TRUE; /* Disable source addr insertion by i82593 */ |
| cfblk.preamb_len = 0; /* 2 bytes preamble (SFD) */ |
| cfblk.loopback = FALSE; |
| cfblk.lin_prio = 0; /* conform to 802.3 backoff algorithm */ |
| cfblk.exp_prio = 5; /* conform to 802.3 backoff algorithm */ |
| cfblk.bof_met = 1; /* conform to 802.3 backoff algorithm */ |
| cfblk.ifrm_spc = 0x20 >> 4; /* 32 bit times interframe spacing */ |
| cfblk.slottim_low = 0x20 >> 5; /* 32 bit times slot time */ |
| cfblk.slottim_hi = 0x0; |
| cfblk.max_retr = 15; |
| cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE); /* Promiscuous mode */ |
| cfblk.bc_dis = FALSE; /* Enable broadcast reception */ |
| cfblk.crs_1 = TRUE; /* Transmit without carrier sense */ |
| cfblk.nocrc_ins = FALSE; /* i82593 generates CRC */ |
| cfblk.crc_1632 = FALSE; /* 32-bit Autodin-II CRC */ |
| cfblk.crs_cdt = FALSE; /* CD not to be interpreted as CS */ |
| cfblk.cs_filter = 0; /* CS is recognized immediately */ |
| cfblk.crs_src = FALSE; /* External carrier sense */ |
| cfblk.cd_filter = 0; /* CD is recognized immediately */ |
| cfblk.min_fr_len = ETH_ZLEN >> 2; /* Minimum frame length 64 bytes */ |
| cfblk.lng_typ = FALSE; /* Length field > 1500 = type field */ |
| cfblk.lng_fld = TRUE; /* Disable 802.3 length field check */ |
| cfblk.rxcrc_xf = TRUE; /* Don't transfer CRC to memory */ |
| cfblk.artx = TRUE; /* Disable automatic retransmission */ |
| cfblk.sarec = TRUE; /* Disable source addr trig of CD */ |
| cfblk.tx_jabber = TRUE; /* Disable jabber jam sequence */ |
| cfblk.hash_1 = FALSE; /* Use bits 0-5 in mc address hash */ |
| cfblk.lbpkpol = TRUE; /* Loopback pin active high */ |
| cfblk.fdx = FALSE; /* Disable full duplex operation */ |
| cfblk.dummy_6 = 0x3f; /* all ones */ |
| cfblk.mult_ia = FALSE; /* No multiple individual addresses */ |
| cfblk.dis_bof = FALSE; /* Disable the backoff algorithm ?! */ |
| cfblk.dummy_1 = TRUE; /* set to 1 */ |
| cfblk.tx_ifs_retrig = 3; /* Hmm... Disabled */ |
| #ifdef MULTICAST_ALL |
| cfblk.mc_all = (lp->allmulticast ? TRUE: FALSE); /* Allow all multicasts */ |
| #else |
| cfblk.mc_all = FALSE; /* No multicast all mode */ |
| #endif |
| cfblk.rcv_mon = 0; /* Monitor mode disabled */ |
| cfblk.frag_acpt = TRUE; /* Do not accept fragments */ |
| cfblk.tstrttrs = FALSE; /* No start transmission threshold */ |
| cfblk.fretx = TRUE; /* FIFO automatic retransmission */ |
| cfblk.syncrqs = FALSE; /* Synchronous DRQ deassertion... */ |
| cfblk.sttlen = TRUE; /* 6 byte status registers */ |
| cfblk.rx_eop = TRUE; /* Signal EOP on packet reception */ |
| cfblk.tx_eop = TRUE; /* Signal EOP on packet transmission */ |
| cfblk.rbuf_size = RX_SIZE>>11; /* Set receive buffer size */ |
| cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */ |
| |
| #ifdef DEBUG_I82593_SHOW |
| print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE, |
| 16, 1, &cfblk, sizeof(struct i82593_conf_block), false); |
| #endif |
| |
| /* Copy the config block to the i82593 */ |
| outb(TX_BASE & 0xff, PIORL(base)); |
| outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); |
| outb(sizeof(struct i82593_conf_block) & 0xff, PIOP(base)); /* lsb */ |
| outb(sizeof(struct i82593_conf_block) >> 8, PIOP(base)); /* msb */ |
| outsb(PIOP(base), (char *) &cfblk, sizeof(struct i82593_conf_block)); |
| |
| /* reset transmit DMA pointer */ |
| hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); |
| hacr_write(base, HACR_DEFAULT); |
| if(!wv_82593_cmd(dev, "wv_82593_config(): configure", |
| OP0_CONFIGURE, SR0_CONFIGURE_DONE)) |
| ret = FALSE; |
| |
| /* Initialize adapter's ethernet MAC address */ |
| outb(TX_BASE & 0xff, PIORL(base)); |
| outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); |
| outb(WAVELAN_ADDR_SIZE, PIOP(base)); /* byte count lsb */ |
| outb(0, PIOP(base)); /* byte count msb */ |
| outsb(PIOP(base), &dev->dev_addr[0], WAVELAN_ADDR_SIZE); |
| |
| /* reset transmit DMA pointer */ |
| hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); |
| hacr_write(base, HACR_DEFAULT); |
| if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup", |
| OP0_IA_SETUP, SR0_IA_SETUP_DONE)) |
| ret = FALSE; |
| |
| #ifdef WAVELAN_ROAMING |
| /* If roaming is enabled, join the "Beacon Request" multicast group... */ |
| /* But only if it's not in there already! */ |
| if(do_roaming) |
| dev_mc_add(dev,WAVELAN_BEACON_ADDRESS, WAVELAN_ADDR_SIZE, 1); |
| #endif /* WAVELAN_ROAMING */ |
| |
| /* If any multicast address to set */ |
| if(lp->mc_count) |
| { |
| struct dev_mc_list * dmi; |
| int addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count; |
| |
| #ifdef DEBUG_CONFIG_INFO |
| printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n", |
| dev->name, lp->mc_count); |
| for(dmi=dev->mc_list; dmi; dmi=dmi->next) |
| printk(KERN_DEBUG " %pM\n", dmi->dmi_addr); |
| #endif |
| |
| /* Initialize adapter's ethernet multicast addresses */ |
| outb(TX_BASE & 0xff, PIORL(base)); |
| outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base)); |
| outb(addrs_len & 0xff, PIOP(base)); /* byte count lsb */ |
| outb((addrs_len >> 8), PIOP(base)); /* byte count msb */ |
| for(dmi=dev->mc_list; dmi; dmi=dmi->next) |
| outsb(PIOP(base), dmi->dmi_addr, dmi->dmi_addrlen); |
| |
| /* reset transmit DMA pointer */ |
| hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET); |
| hacr_write(base, HACR_DEFAULT); |
| if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup", |
| OP0_MC_SETUP, SR0_MC_SETUP_DONE)) |
| ret = FALSE; |
| /* remember to avoid repeated reset */ |
| lp->mc_count = netdev_mc_count(dev); |
| } |
| |
| /* Job done, clear the flag */ |
| lp->reconfig_82593 = FALSE; |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name); |
| #endif |
| return(ret); |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Read the Access Configuration Register, perform a software reset, |
| * and then re-enable the card's software. |
| * |
| * If I understand correctly : reset the pcmcia interface of the |
| * wavelan. |
| * (called by wv_config()) |
| */ |
| static int |
| wv_pcmcia_reset(struct net_device * dev) |
| { |
| int i; |
| conf_reg_t reg = { 0, CS_READ, CISREG_COR, 0 }; |
| struct pcmcia_device * link = ((net_local *)netdev_priv(dev))->link; |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: ->wv_pcmcia_reset()\n", dev->name); |
| #endif |
| |
| i = pcmcia_access_configuration_register(link, ®); |
| if (i != 0) |
| return FALSE; |
| |
| #ifdef DEBUG_CONFIG_INFO |
| printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n", |
| dev->name, (u_int) reg.Value); |
| #endif |
| |
| reg.Action = CS_WRITE; |
| reg.Value = reg.Value | COR_SW_RESET; |
| i = pcmcia_access_configuration_register(link, ®); |
| if (i != 0) |
| return FALSE; |
| |
| reg.Action = CS_WRITE; |
| reg.Value = COR_LEVEL_IRQ | COR_CONFIG; |
| i = pcmcia_access_configuration_register(link, ®); |
| if (i != 0) |
| return FALSE; |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name); |
| #endif |
| return TRUE; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * wavelan_hw_config() is called after a CARD_INSERTION event is |
| * received, to configure the wavelan hardware. |
| * Note that the reception will be enabled in wavelan->open(), so the |
| * device is configured but idle... |
| * Performs the following actions: |
| * 1. A pcmcia software reset (using wv_pcmcia_reset()) |
| * 2. A power reset (reset DMA) |
| * 3. Reset the LAN controller |
| * 4. Initialize the radio modem (using wv_mmc_init) |
| * 5. Configure LAN controller (using wv_82593_config) |
| * 6. Perform a diagnostic on the LAN controller |
| * (called by wavelan_event() & wv_hw_reset()) |
| */ |
| static int |
| wv_hw_config(struct net_device * dev) |
| { |
| net_local * lp = netdev_priv(dev); |
| unsigned int base = dev->base_addr; |
| unsigned long flags; |
| int ret = FALSE; |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name); |
| #endif |
| |
| /* compile-time check the sizes of structures */ |
| BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE); |
| BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE); |
| BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE); |
| |
| /* Reset the pcmcia interface */ |
| if(wv_pcmcia_reset(dev) == FALSE) |
| return FALSE; |
| |
| /* Disable interrupts */ |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Disguised goto ;-) */ |
| do |
| { |
| /* Power UP the module + reset the modem + reset host adapter |
| * (in fact, reset DMA channels) */ |
| hacr_write_slow(base, HACR_RESET); |
| hacr_write(base, HACR_DEFAULT); |
| |
| /* Check if the module has been powered up... */ |
| if(hasr_read(base) & HASR_NO_CLK) |
| { |
| #ifdef DEBUG_CONFIG_ERRORS |
| printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n", |
| dev->name); |
| #endif |
| break; |
| } |
| |
| /* initialize the modem */ |
| if(wv_mmc_init(dev) == FALSE) |
| { |
| #ifdef DEBUG_CONFIG_ERRORS |
| printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n", |
| dev->name); |
| #endif |
| break; |
| } |
| |
| /* reset the LAN controller (i82593) */ |
| outb(OP0_RESET, LCCR(base)); |
| mdelay(1); /* A bit crude ! */ |
| |
| /* Initialize the LAN controller */ |
| if(wv_82593_config(dev) == FALSE) |
| { |
| #ifdef DEBUG_CONFIG_ERRORS |
| printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n", |
| dev->name); |
| #endif |
| break; |
| } |
| |
| /* Diagnostic */ |
| if(wv_diag(dev) == FALSE) |
| { |
| #ifdef DEBUG_CONFIG_ERRORS |
| printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n", |
| dev->name); |
| #endif |
| break; |
| } |
| |
| /* |
| * insert code for loopback test here |
| */ |
| |
| /* The device is now configured */ |
| lp->configured = 1; |
| ret = TRUE; |
| } |
| while(0); |
| |
| /* Re-enable interrupts */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name); |
| #endif |
| return(ret); |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Totally reset the wavelan and restart it. |
| * Performs the following actions: |
| * 1. Call wv_hw_config() |
| * 2. Start the LAN controller's receive unit |
| * (called by wavelan_event(), wavelan_watchdog() and wavelan_open()) |
| */ |
| static void |
| wv_hw_reset(struct net_device * dev) |
| { |
| net_local * lp = netdev_priv(dev); |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name); |
| #endif |
| |
| lp->nresets++; |
| lp->configured = 0; |
| |
| /* Call wv_hw_config() for most of the reset & init stuff */ |
| if(wv_hw_config(dev) == FALSE) |
| return; |
| |
| /* start receive unit */ |
| wv_ru_start(dev); |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name); |
| #endif |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * wv_pcmcia_config() is called after a CARD_INSERTION event is |
| * received, to configure the PCMCIA socket, and to make the ethernet |
| * device available to the system. |
| * (called by wavelan_event()) |
| */ |
| static int |
| wv_pcmcia_config(struct pcmcia_device * link) |
| { |
| struct net_device * dev = (struct net_device *) link->priv; |
| int i; |
| win_req_t req; |
| memreq_t mem; |
| net_local * lp = netdev_priv(dev); |
| |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link); |
| #endif |
| |
| do |
| { |
| i = pcmcia_request_io(link, &link->io); |
| if (i != 0) |
| break; |
| |
| /* |
| * Now allocate an interrupt line. Note that this does not |
| * actually assign a handler to the interrupt. |
| */ |
| i = pcmcia_request_irq(link, &link->irq); |
| if (i != 0) |
| break; |
| |
| /* |
| * This actually configures the PCMCIA socket -- setting up |
| * the I/O windows and the interrupt mapping. |
| */ |
| link->conf.ConfigIndex = 1; |
| i = pcmcia_request_configuration(link, &link->conf); |
| if (i != 0) |
| break; |
| |
| /* |
| * Allocate a small memory window. Note that the struct pcmcia_device |
| * structure provides space for one window handle -- if your |
| * device needs several windows, you'll need to keep track of |
| * the handles in your private data structure, link->priv. |
| */ |
| req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; |
| req.Base = req.Size = 0; |
| req.AccessSpeed = mem_speed; |
| i = pcmcia_request_window(link, &req, &link->win); |
| if (i != 0) |
| break; |
| |
| lp->mem = ioremap(req.Base, req.Size); |
| dev->mem_start = (u_long)lp->mem; |
| dev->mem_end = dev->mem_start + req.Size; |
| |
| mem.CardOffset = 0; mem.Page = 0; |
| i = pcmcia_map_mem_page(link, link->win, &mem); |
| if (i != 0) |
| break; |
| |
| /* Feed device with this info... */ |
| dev->irq = link->irq.AssignedIRQ; |
| dev->base_addr = link->io.BasePort1; |
| netif_start_queue(dev); |
| |
| #ifdef DEBUG_CONFIG_INFO |
| printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART %p IRQ %d IOPORT 0x%x\n", |
| lp->mem, dev->irq, (u_int) dev->base_addr); |
| #endif |
| |
| SET_NETDEV_DEV(dev, &link->dev); |
| i = register_netdev(dev); |
| if(i != 0) |
| { |
| #ifdef DEBUG_CONFIG_ERRORS |
| printk(KERN_INFO "wv_pcmcia_config(): register_netdev() failed\n"); |
| #endif |
| break; |
| } |
| } |
| while(0); /* Humm... Disguised goto !!! */ |
| |
| /* If any step failed, release any partially configured state */ |
| if(i != 0) |
| { |
| wv_pcmcia_release(link); |
| return FALSE; |
| } |
| |
| strcpy(((net_local *) netdev_priv(dev))->node.dev_name, dev->name); |
| link->dev_node = &((net_local *) netdev_priv(dev))->node; |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "<-wv_pcmcia_config()\n"); |
| #endif |
| return TRUE; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * After a card is removed, wv_pcmcia_release() will unregister the net |
| * device, and release the PCMCIA configuration. If the device is |
| * still open, this will be postponed until it is closed. |
| */ |
| static void |
| wv_pcmcia_release(struct pcmcia_device *link) |
| { |
| struct net_device * dev = (struct net_device *) link->priv; |
| net_local * lp = netdev_priv(dev); |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: -> wv_pcmcia_release(0x%p)\n", dev->name, link); |
| #endif |
| |
| iounmap(lp->mem); |
| pcmcia_disable_device(link); |
| |
| #ifdef DEBUG_CONFIG_TRACE |
| printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name); |
| #endif |
| } |
| |
| /************************ INTERRUPT HANDLING ************************/ |
| |
| /* |
| * This function is the interrupt handler for the WaveLAN card. This |
| * routine will be called whenever: |
| * 1. A packet is received. |
| * 2. A packet has successfully been transferred and the unit is |
| * ready to transmit another packet. |
| * 3. A command has completed execution. |
| */ |
| static irqreturn_t |
| wavelan_interrupt(int irq, |
| void * dev_id) |
| { |
| struct net_device * dev = dev_id; |
| net_local * lp; |
| unsigned int base; |
| int status0; |
| u_int tx_status; |
| |
| #ifdef DEBUG_INTERRUPT_TRACE |
| printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name); |
| #endif |
| |
| lp = netdev_priv(dev); |
| base = dev->base_addr; |
| |
| #ifdef DEBUG_INTERRUPT_INFO |
| /* Check state of our spinlock (it should be cleared) */ |
| if(spin_is_locked(&lp->spinlock)) |
| printk(KERN_DEBUG |
| "%s: wavelan_interrupt(): spinlock is already locked !!!\n", |
| dev->name); |
| #endif |
| |
| /* Prevent reentrancy. We need to do that because we may have |
| * multiple interrupt handler running concurrently. |
| * It is safe because interrupts are disabled before aquiring |
| * the spinlock. */ |
| spin_lock(&lp->spinlock); |
| |
| /* Treat all pending interrupts */ |
| while(1) |
| { |
| /* ---------------- INTERRUPT CHECKING ---------------- */ |
| /* |
| * Look for the interrupt and verify the validity |
| */ |
| outb(CR0_STATUS_0 | OP0_NOP, LCCR(base)); |
| status0 = inb(LCSR(base)); |
| |
| #ifdef DEBUG_INTERRUPT_INFO |
| printk(KERN_DEBUG "status0 0x%x [%s => 0x%x]", status0, |
| (status0&SR0_INTERRUPT)?"int":"no int",status0&~SR0_INTERRUPT); |
| if(status0&SR0_INTERRUPT) |
| { |
| printk(" [%s => %d]\n", (status0 & SR0_CHNL) ? "chnl" : |
| ((status0 & SR0_EXECUTION) ? "cmd" : |
| ((status0 & SR0_RECEPTION) ? "recv" : "unknown")), |
| (status0 & SR0_EVENT_MASK)); |
| } |
| else |
| printk("\n"); |
| #endif |
| |
| /* Return if no actual interrupt from i82593 (normal exit) */ |
| if(!(status0 & SR0_INTERRUPT)) |
| break; |
| |
| /* If interrupt is both Rx and Tx or none... |
| * This code in fact is there to catch the spurious interrupt |
| * when you remove the wavelan pcmcia card from the socket */ |
| if(((status0 & SR0_BOTH_RX_TX) == SR0_BOTH_RX_TX) || |
| ((status0 & SR0_BOTH_RX_TX) == 0x0)) |
| { |
| #ifdef DEBUG_INTERRUPT_INFO |
| printk(KERN_INFO "%s: wv_interrupt(): bogus interrupt (or from dead card) : %X\n", |
| dev->name, status0); |
| #endif |
| /* Acknowledge the interrupt */ |
| outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); |
| break; |
| } |
| |
| /* ----------------- RECEIVING PACKET ----------------- */ |
| /* |
| * When the wavelan signal the reception of a new packet, |
| * we call wv_packet_rcv() to copy if from the buffer and |
| * send it to NET3 |
| */ |
| if(status0 & SR0_RECEPTION) |
| { |
| #ifdef DEBUG_INTERRUPT_INFO |
| printk(KERN_DEBUG "%s: wv_interrupt(): receive\n", dev->name); |
| #endif |
| |
| if((status0 & SR0_EVENT_MASK) == SR0_STOP_REG_HIT) |
| { |
| #ifdef DEBUG_INTERRUPT_ERROR |
| printk(KERN_INFO "%s: wv_interrupt(): receive buffer overflow\n", |
| dev->name); |
| #endif |
| dev->stats.rx_over_errors++; |
| lp->overrunning = 1; |
| } |
| |
| /* Get the packet */ |
| wv_packet_rcv(dev); |
| lp->overrunning = 0; |
| |
| /* Acknowledge the interrupt */ |
| outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); |
| continue; |
| } |
| |
| /* ---------------- COMMAND COMPLETION ---------------- */ |
| /* |
| * Interrupts issued when the i82593 has completed a command. |
| * Most likely : transmission done |
| */ |
| |
| /* If a transmission has been done */ |
| if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE || |
| (status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE || |
| (status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) |
| { |
| #ifdef DEBUG_TX_ERROR |
| if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) |
| printk(KERN_INFO "%s: wv_interrupt(): packet transmitted without CRC.\n", |
| dev->name); |
| #endif |
| |
| /* Get transmission status */ |
| tx_status = inb(LCSR(base)); |
| tx_status |= (inb(LCSR(base)) << 8); |
| #ifdef DEBUG_INTERRUPT_INFO |
| printk(KERN_DEBUG "%s: wv_interrupt(): transmission done\n", |
| dev->name); |
| { |
| u_int rcv_bytes; |
| u_char status3; |
| rcv_bytes = inb(LCSR(base)); |
| rcv_bytes |= (inb(LCSR(base)) << 8); |
| status3 = inb(LCSR(base)); |
| printk(KERN_DEBUG "tx_status 0x%02x rcv_bytes 0x%02x status3 0x%x\n", |
| tx_status, rcv_bytes, (u_int) status3); |
| } |
| #endif |
| /* Check for possible errors */ |
| if((tx_status & TX_OK) != TX_OK) |
| { |
| dev->stats.tx_errors++; |
| |
| if(tx_status & TX_FRTL) |
| { |
| #ifdef DEBUG_TX_ERROR |
| printk(KERN_INFO "%s: wv_interrupt(): frame too long\n", |
| dev->name); |
| #endif |
| } |
| if(tx_status & TX_UND_RUN) |
| { |
| #ifdef DEBUG_TX_FAIL |
| printk(KERN_DEBUG "%s: wv_interrupt(): DMA underrun\n", |
| dev->name); |
| #endif |
| dev->stats.tx_aborted_errors++; |
| } |
| if(tx_status & TX_LOST_CTS) |
| { |
| #ifdef DEBUG_TX_FAIL |
| printk(KERN_DEBUG "%s: wv_interrupt(): no CTS\n", dev->name); |
| #endif |
| dev->stats.tx_carrier_errors++; |
| } |
| if(tx_status & TX_LOST_CRS) |
| { |
| #ifdef DEBUG_TX_FAIL |
| printk(KERN_DEBUG "%s: wv_interrupt(): no carrier\n", |
| dev->name); |
| #endif |
| dev->stats.tx_carrier_errors++; |
| } |
| if(tx_status & TX_HRT_BEAT) |
| { |
| #ifdef DEBUG_TX_FAIL |
| printk(KERN_DEBUG "%s: wv_interrupt(): heart beat\n", dev->name); |
| #endif |
| dev->stats.tx_heartbeat_errors++; |
| } |
| if(tx_status & TX_DEFER) |
| { |
| #ifdef DEBUG_TX_FAIL |
| printk(KERN_DEBUG "%s: wv_interrupt(): channel jammed\n", |
| dev->name); |
| #endif |
| } |
| /* Ignore late collisions since they're more likely to happen |
| * here (the WaveLAN design prevents the LAN controller from |
| * receiving while it is transmitting). We take action only when |
| * the maximum retransmit attempts is exceeded. |
| */ |
| if(tx_status & TX_COLL) |
| { |
| if(tx_status & TX_MAX_COL) |
| { |
| #ifdef DEBUG_TX_FAIL |
| printk(KERN_DEBUG "%s: wv_interrupt(): channel congestion\n", |
| dev->name); |
| #endif |
| if(!(tx_status & TX_NCOL_MASK)) |
| { |
| dev->stats.collisions += 0x10; |
| } |
| } |
| } |
| } /* if(!(tx_status & TX_OK)) */ |
| |
| dev->stats.collisions += (tx_status & TX_NCOL_MASK); |
| dev->stats.tx_packets++; |
| |
| netif_wake_queue(dev); |
| outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */ |
| } |
| else /* if interrupt = transmit done or retransmit done */ |
| { |
| #ifdef DEBUG_INTERRUPT_ERROR |
| printk(KERN_INFO "wavelan_cs: unknown interrupt, status0 = %02x\n", |
| status0); |
| #endif |
| outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */ |
| } |
| } /* while(1) */ |
| |
| spin_unlock(&lp->spinlock); |
| |
| #ifdef DEBUG_INTERRUPT_TRACE |
| printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name); |
| #endif |
| |
| /* We always return IRQ_HANDLED, because we will receive empty |
| * interrupts under normal operations. Anyway, it doesn't matter |
| * as we are dealing with an ISA interrupt that can't be shared. |
| * |
| * Explanation : under heavy receive, the following happens : |
| * ->wavelan_interrupt() |
| * (status0 & SR0_INTERRUPT) != 0 |
| * ->wv_packet_rcv() |
| * (status0 & SR0_INTERRUPT) != 0 |
| * ->wv_packet_rcv() |
| * (status0 & SR0_INTERRUPT) == 0 // i.e. no more event |
| * <-wavelan_interrupt() |
| * ->wavelan_interrupt() |
| * (status0 & SR0_INTERRUPT) == 0 // i.e. empty interrupt |
| * <-wavelan_interrupt() |
| * Jean II */ |
| return IRQ_HANDLED; |
| } /* wv_interrupt */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Watchdog: when we start a transmission, a timer is set for us in the |
| * kernel. If the transmission completes, this timer is disabled. If |
| * the timer expires, we are called and we try to unlock the hardware. |
| * |
| * Note : This watchdog is move clever than the one in the ISA driver, |
| * because it try to abort the current command before reseting |
| * everything... |
| * On the other hand, it's a bit simpler, because we don't have to |
| * deal with the multiple Tx buffers... |
| */ |
| static void |
| wavelan_watchdog(struct net_device * dev) |
| { |
| net_local * lp = netdev_priv(dev); |
| unsigned int base = dev->base_addr; |
| unsigned long flags; |
| int aborted = FALSE; |
| |
| #ifdef DEBUG_INTERRUPT_TRACE |
| printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name); |
| #endif |
| |
| #ifdef DEBUG_INTERRUPT_ERROR |
| printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n", |
| dev->name); |
| #endif |
| |
| spin_lock_irqsave(&lp->spinlock, flags); |
| |
| /* Ask to abort the current command */ |
| outb(OP0_ABORT, LCCR(base)); |
| |
| /* Wait for the end of the command (a bit hackish) */ |
| if(wv_82593_cmd(dev, "wavelan_watchdog(): abort", |
| OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED)) |
| aborted = TRUE; |
| |
| /* Release spinlock here so that wv_hw_reset() can grab it */ |
| spin_unlock_irqrestore(&lp->spinlock, flags); |
| |
| /* Check if we were successful in aborting it */ |
| if(!aborted) |
| { |
| /* It seem that it wasn't enough */ |
| #ifdef DEBUG_INTERRUPT_ERROR |
| printk(KERN_INFO "%s: wavelan_watchdog: abort failed, trying reset\n", |
| dev->name); |
| #endif |
| wv_hw_reset(dev); |
| } |
| |
| #ifdef DEBUG_PSA_SHOW |
| { |
| psa_t psa; |
| psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa)); |
| wv_psa_show(&psa); |
| } |
| #endif |
| #ifdef DEBUG_MMC_SHOW |
| wv_mmc_show(dev); |
| #endif |
| #ifdef DEBUG_I82593_SHOW |
| wv_ru_show(dev); |
| #endif |
| |
| /* We are no more waiting for something... */ |
| netif_wake_queue(dev); |
| |
| #ifdef DEBUG_INTERRUPT_TRACE |
| printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name); |
| #endif |
| } |
| |
| /********************* CONFIGURATION CALLBACKS *********************/ |
| /* |
| * Here are the functions called by the pcmcia package (cardmgr) and |
| * linux networking (NET3) for initialization, configuration and |
| * deinstallations of the Wavelan Pcmcia Hardware. |
| */ |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Configure and start up the WaveLAN PCMCIA adaptor. |
| * Called by NET3 when it "open" the device. |
| */ |
| static int |
| wavelan_open(struct net_device * dev) |
| { |
| net_local * lp = netdev_priv(dev); |
| struct pcmcia_device * link = lp->link; |
| unsigned int base = dev->base_addr; |
| |
| #ifdef DEBUG_CALLBACK_TRACE |
| printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name, |
| (unsigned int) dev); |
| #endif |
| |
| /* Check if the modem is powered up (wavelan_close() power it down */ |
| if(hasr_read(base) & HASR_NO_CLK) |
| { |
| /* Power up (power up time is 250us) */ |
| hacr_write(base, HACR_DEFAULT); |
| |
| /* Check if the module has been powered up... */ |
| if(hasr_read(base) & HASR_NO_CLK) |
| { |
| #ifdef DEBUG_CONFIG_ERRORS |
| printk(KERN_WARNING "%s: wavelan_open(): modem not connected\n", |
| dev->name); |
| #endif |
| return FALSE; |
| } |
| } |
| |
| /* Start reception and declare the driver ready */ |
| if(!lp->configured) |
| return FALSE; |
| if(!wv_ru_start(dev)) |
| wv_hw_reset(dev); /* If problem : reset */ |
| netif_start_queue(dev); |
| |
| /* Mark the device as used */ |
| link->open++; |
| |
| #ifdef WAVELAN_ROAMING |
| if(do_roaming) |
| wv_roam_init(dev); |
| #endif /* WAVELAN_ROAMING */ |
| |
| #ifdef DEBUG_CALLBACK_TRACE |
| printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name); |
| #endif |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * Shutdown the WaveLAN PCMCIA adaptor. |
| * Called by NET3 when it "close" the device. |
| */ |
| static int |
| wavelan_close(struct net_device * dev) |
| { |
| struct pcmcia_device * link = ((net_local *)netdev_priv(dev))->link; |
| unsigned int base = dev->base_addr; |
| |
| #ifdef DEBUG_CALLBACK_TRACE |
| printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name, |
| (unsigned int) dev); |
| #endif |
| |
| /* If the device isn't open, then nothing to do */ |
| if(!link->open) |
| { |
| #ifdef DEBUG_CONFIG_INFO |
| printk(KERN_DEBUG "%s: wavelan_close(): device not open\n", dev->name); |
| #endif |
| return 0; |
| } |
| |
| #ifdef WAVELAN_ROAMING |
| /* Cleanup of roaming stuff... */ |
| if(do_roaming) |
| wv_roam_cleanup(dev); |
| #endif /* WAVELAN_ROAMING */ |
| |
| link->open--; |
| |
| /* If the card is still present */ |
| if(netif_running(dev)) |
| { |
| netif_stop_queue(dev); |
| |
| /* Stop receiving new messages and wait end of transmission */ |
| wv_ru_stop(dev); |
| |
| /* Power down the module */ |
| hacr_write(base, HACR_DEFAULT & (~HACR_PWR_STAT)); |
| } |
| |
| #ifdef DEBUG_CALLBACK_TRACE |
| printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name); |
| #endif |
| return 0; |
| } |
| |
| static const struct net_device_ops wavelan_netdev_ops = { |
| .ndo_open = wavelan_open, |
| .ndo_stop = wavelan_close, |
| .ndo_start_xmit = wavelan_packet_xmit, |
| .ndo_set_multicast_list = wavelan_set_multicast_list, |
| #ifdef SET_MAC_ADDRESS |
| .ndo_set_mac_address = wavelan_set_mac_address, |
| #endif |
| .ndo_tx_timeout = wavelan_watchdog, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * wavelan_attach() creates an "instance" of the driver, allocating |
| * local data structures for one device (one interface). The device |
| * is registered with Card Services. |
| * |
| * The dev_link structure is initialized, but we don't actually |
| * configure the card at this point -- we wait until we receive a |
| * card insertion event. |
| */ |
| static int |
| wavelan_probe(struct pcmcia_device *p_dev) |
| { |
| struct net_device * dev; /* Interface generic data */ |
| net_local * lp; /* Interface specific data */ |
| int ret; |
| |
| #ifdef DEBUG_CALLBACK_TRACE |
| printk(KERN_DEBUG "-> wavelan_attach()\n"); |
| #endif |
| |
| /* The io structure describes IO port mapping */ |
| p_dev->io.NumPorts1 = 8; |
| p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; |
| p_dev->io.IOAddrLines = 3; |
| |
| /* Interrupt setup */ |
| p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; |
| p_dev->irq.Handler = wavelan_interrupt; |
| |
| /* General socket configuration */ |
| p_dev->conf.Attributes = CONF_ENABLE_IRQ; |
| p_dev->conf.IntType = INT_MEMORY_AND_IO; |
| |
| /* Allocate the generic data structure */ |
| dev = alloc_etherdev(sizeof(net_local)); |
| if (!dev) |
| return -ENOMEM; |
| |
| p_dev->priv = dev; |
| |
| lp = netdev_priv(dev); |
| |
| /* Init specific data */ |
| lp->configured = 0; |
| lp->reconfig_82593 = FALSE; |
| lp->nresets = 0; |
| /* Multicast stuff */ |
| lp->promiscuous = 0; |
| lp->allmulticast = 0; |
| lp->mc_count = 0; |
| |
| /* Init spinlock */ |
| spin_lock_init(&lp->spinlock); |
| |
| /* back links */ |
| lp->dev = dev; |
| |
| /* wavelan NET3 callbacks */ |
| dev->netdev_ops = &wavelan_netdev_ops; |
| dev->watchdog_timeo = WATCHDOG_JIFFIES; |
| SET_ETHTOOL_OPS(dev, &ops); |
| |
| dev->wireless_handlers = &wavelan_handler_def; |
| lp->wireless_data.spy_data = &lp->spy_data; |
| dev->wireless_data = &lp->wireless_data; |
| |
| /* Other specific data */ |
| dev->mtu = WAVELAN_MTU; |
| |
| ret = wv_pcmcia_config(p_dev); |
| if (ret) |
| return ret; |
| |
| ret = wv_hw_config(dev); |
| if (ret) { |
| dev->irq = 0; |
| pcmcia_disable_device(p_dev); |
| return ret; |
| } |
| |
| wv_init_info(dev); |
| |
| #ifdef DEBUG_CALLBACK_TRACE |
| printk(KERN_DEBUG "<- wavelan_attach()\n"); |
| #endif |
| |
| return 0; |
| } |
| |
| /*------------------------------------------------------------------*/ |
| /* |
| * This deletes a driver "instance". The device is de-registered with |
| * Card Services. If it has been released, all local data structures |
| * are freed. Otherwise, the structures will be freed when the device |
| * is released. |
| */ |
| static void |
| wavelan_detach(struct pcmcia_device *link) |
| { |
| #ifdef DEBUG_CALLBACK_TRACE |
| printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link); |
| #endif |
| |
| /* Some others haven't done their job : give them another chance */ |
| wv_pcmcia_release(link); |
| |
| /* Free pieces */ |
| if(link->priv) |
| { |
| struct net_device * dev = (struct net_device *) link->priv; |
| |
| /* Remove ourselves from the kernel list of ethernet devices */ |
| /* Warning : can't be called from interrupt, timer or wavelan_close() */ |
| if (link->dev_node) |
| unregister_netdev(dev); |
| link->dev_node = NULL; |
| ((net_local *)netdev_priv(dev))->link = NULL; |
| ((net_local *)netdev_priv(dev))->dev = NULL; |
| free_netdev(dev); |
| } |
| |
| #ifdef DEBUG_CALLBACK_TRACE |
| printk(KERN_DEBUG "<- wavelan_detach()\n"); |
| #endif |
| } |
| |
| static int wavelan_suspend(struct pcmcia_device *link) |
| { |
| struct net_device * dev = (struct net_device *) link->priv; |
| |
| /* NB: wavelan_close will be called, but too late, so we are |
| * obliged to close nicely the wavelan here. David, could you |
| * close the device before suspending them ? And, by the way, |
| * could you, on resume, add a "route add -net ..." after the |
| * ifconfig up ? Thanks... */ |
| |
| /* Stop receiving new messages and wait end of transmission */ |
| wv_ru_stop(dev); |
| |
| if (link->open) |
| netif_device_detach(dev); |
| |
| /* Power down the module */ |
| hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT)); |
| |
| return 0; |
| } |
| |
| static int wavelan_resume(struct pcmcia_device *link) |
| { |
| struct net_device * dev = (struct net_device *) link->priv; |
| |
| if (link->open) { |
| wv_hw_reset(dev); |
| netif_device_attach(dev); |
| } |
| |
| return 0; |
| } |
| |
| |
| static struct pcmcia_device_id wavelan_ids[] = { |
| PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975), |
| PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06), |
| PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/PCMCIA", 0x23eb9949, 0x1bc50975), |
| PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/PCMCIA", 0x24358cd4, 0x1bc50975), |
| PCMCIA_DEVICE_NULL, |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, wavelan_ids); |
| |
| static struct pcmcia_driver wavelan_driver = { |
| .owner = THIS_MODULE, |
| .drv = { |
| .name = "wavelan_cs", |
| }, |
| .probe = wavelan_probe, |
| .remove = wavelan_detach, |
| .id_table = wavelan_ids, |
| .suspend = wavelan_suspend, |
| .resume = wavelan_resume, |
| }; |
| |
| static int __init |
| init_wavelan_cs(void) |
| { |
| return pcmcia_register_driver(&wavelan_driver); |
| } |
| |
| static void __exit |
| exit_wavelan_cs(void) |
| { |
| pcmcia_unregister_driver(&wavelan_driver); |
| } |
| |
| module_init(init_wavelan_cs); |
| module_exit(exit_wavelan_cs); |