| /* |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net |
| * |
| * Copyright (C) 2001 Ralf Baechle |
| * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. |
| * Author: Maciej W. Rozycki <macro@mips.com> |
| * |
| * This file define the irq handler for MIPS CPU interrupts. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /* |
| * Almost all MIPS CPUs define 8 interrupt sources. They are typically |
| * level triggered (i.e., cannot be cleared from CPU; must be cleared from |
| * device). The first two are software interrupts which we don't really |
| * use or support. The last one is usually the CPU timer interrupt if |
| * counter register is present or, for CPUs with an external FPU, by |
| * convention it's the FPU exception interrupt. |
| * |
| * Don't even think about using this on SMP. You have been warned. |
| * |
| * This file exports one global function: |
| * void mips_cpu_irq_init(void); |
| */ |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| |
| #include <asm/irq_cpu.h> |
| #include <asm/mipsregs.h> |
| #include <asm/mipsmtregs.h> |
| #include <asm/setup.h> |
| |
| static inline void unmask_mips_irq(struct irq_data *d) |
| { |
| set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE)); |
| irq_enable_hazard(); |
| } |
| |
| static inline void mask_mips_irq(struct irq_data *d) |
| { |
| clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE)); |
| irq_disable_hazard(); |
| } |
| |
| static struct irq_chip mips_cpu_irq_controller = { |
| .name = "MIPS", |
| .irq_ack = mask_mips_irq, |
| .irq_mask = mask_mips_irq, |
| .irq_mask_ack = mask_mips_irq, |
| .irq_unmask = unmask_mips_irq, |
| .irq_eoi = unmask_mips_irq, |
| .irq_disable = mask_mips_irq, |
| .irq_enable = unmask_mips_irq, |
| }; |
| |
| /* |
| * Basically the same as above but taking care of all the MT stuff |
| */ |
| |
| static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d) |
| { |
| unsigned int vpflags = dvpe(); |
| |
| clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE)); |
| evpe(vpflags); |
| unmask_mips_irq(d); |
| return 0; |
| } |
| |
| /* |
| * While we ack the interrupt interrupts are disabled and thus we don't need |
| * to deal with concurrency issues. Same for mips_cpu_irq_end. |
| */ |
| static void mips_mt_cpu_irq_ack(struct irq_data *d) |
| { |
| unsigned int vpflags = dvpe(); |
| clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE)); |
| evpe(vpflags); |
| mask_mips_irq(d); |
| } |
| |
| static struct irq_chip mips_mt_cpu_irq_controller = { |
| .name = "MIPS", |
| .irq_startup = mips_mt_cpu_irq_startup, |
| .irq_ack = mips_mt_cpu_irq_ack, |
| .irq_mask = mask_mips_irq, |
| .irq_mask_ack = mips_mt_cpu_irq_ack, |
| .irq_unmask = unmask_mips_irq, |
| .irq_eoi = unmask_mips_irq, |
| .irq_disable = mask_mips_irq, |
| .irq_enable = unmask_mips_irq, |
| }; |
| |
| asmlinkage void __weak plat_irq_dispatch(void) |
| { |
| unsigned long pending = read_c0_cause() & read_c0_status() & ST0_IM; |
| int irq; |
| |
| if (!pending) { |
| spurious_interrupt(); |
| return; |
| } |
| |
| pending >>= CAUSEB_IP; |
| while (pending) { |
| irq = fls(pending) - 1; |
| do_IRQ(MIPS_CPU_IRQ_BASE + irq); |
| pending &= ~BIT(irq); |
| } |
| } |
| |
| static int mips_cpu_intc_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hw) |
| { |
| static struct irq_chip *chip; |
| |
| if (hw < 2 && cpu_has_mipsmt) { |
| /* Software interrupts are used for MT/CMT IPI */ |
| chip = &mips_mt_cpu_irq_controller; |
| } else { |
| chip = &mips_cpu_irq_controller; |
| } |
| |
| if (cpu_has_vint) |
| set_vi_handler(hw, plat_irq_dispatch); |
| |
| irq_set_chip_and_handler(irq, chip, handle_percpu_irq); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops mips_cpu_intc_irq_domain_ops = { |
| .map = mips_cpu_intc_map, |
| .xlate = irq_domain_xlate_onecell, |
| }; |
| |
| static void __init __mips_cpu_irq_init(struct device_node *of_node) |
| { |
| struct irq_domain *domain; |
| |
| /* Mask interrupts. */ |
| clear_c0_status(ST0_IM); |
| clear_c0_cause(CAUSEF_IP); |
| |
| domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0, |
| &mips_cpu_intc_irq_domain_ops, NULL); |
| if (!domain) |
| panic("Failed to add irqdomain for MIPS CPU"); |
| } |
| |
| void __init mips_cpu_irq_init(void) |
| { |
| __mips_cpu_irq_init(NULL); |
| } |
| |
| int __init mips_cpu_irq_of_init(struct device_node *of_node, |
| struct device_node *parent) |
| { |
| __mips_cpu_irq_init(of_node); |
| return 0; |
| } |