[PATCH] EDAC: name cleanup
Perform the following name substitutions on all source files:
sed 's/BS_MOD_STR/EDAC_MOD_STR/g'
sed 's/bs_thread_info/edac_thread_info/g'
sed 's/bs_thread/edac_thread/g'
sed 's/bs_xstr/edac_xstr/g'
sed 's/bs_str/edac_str/g'
The names that start with BS_ or bs_ are artifacts of when the code
was called "bluesmoke".
Signed-off-by: David S. Peterson <dsp@llnl.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/edac/amd76x_edac.c b/drivers/edac/amd76x_edac.c
index 60535bb..da171a5 100644
--- a/drivers/edac/amd76x_edac.c
+++ b/drivers/edac/amd76x_edac.c
@@ -233,7 +233,7 @@
mci->edac_cap = ems_mode ?
(EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE;
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.4.2.5 $";
mci->ctl_name = amd76x_devs[dev_idx].ctl_name;
mci->edac_check = amd76x_check;
@@ -339,7 +339,7 @@
static struct pci_driver amd76x_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = amd76x_init_one,
.remove = __devexit_p(amd76x_remove_one),
.id_table = amd76x_pci_tbl,
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 25edba5..48373fd 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -788,7 +788,7 @@
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
EDAC_FLAG_S4ECD4ED;
/* FIXME - what if different memory types are in different csrows? */
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.11 $";
mci->pdev = pdev;
@@ -1043,7 +1043,7 @@
static struct pci_driver e752x_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = e752x_init_one,
.remove = __devexit_p(e752x_remove_one),
.id_table = e752x_pci_tbl,
diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c
index e753741..8001797 100644
--- a/drivers/edac/e7xxx_edac.c
+++ b/drivers/edac/e7xxx_edac.c
@@ -383,7 +383,7 @@
mci->edac_ctl_cap =
EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED;
/* FIXME - what if different memory types are in different csrows? */
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.9 $";
mci->pdev = pdev;
@@ -536,7 +536,7 @@
static struct pci_driver e7xxx_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = e7xxx_init_one,
.remove = __devexit_p(e7xxx_remove_one),
.id_table = e7xxx_pci_tbl,
diff --git a/drivers/edac/edac_mc.h b/drivers/edac/edac_mc.h
index 4bd8375..0bcc379 100644
--- a/drivers/edac/edac_mc.h
+++ b/drivers/edac/edac_mc.h
@@ -80,9 +80,9 @@
#endif /* !CONFIG_EDAC_DEBUG */
-#define bs_xstr(s) bs_str(s)
-#define bs_str(s) #s
-#define BS_MOD_STR bs_xstr(KBUILD_BASENAME)
+#define edac_xstr(s) edac_str(s)
+#define edac_str(s) #s
+#define EDAC_MOD_STR edac_xstr(KBUILD_BASENAME)
#define BIT(x) (1 << (x))
diff --git a/drivers/edac/i82860_edac.c b/drivers/edac/i82860_edac.c
index fa9ab84..b0c05ad 100644
--- a/drivers/edac/i82860_edac.c
+++ b/drivers/edac/i82860_edac.c
@@ -162,7 +162,7 @@
mci->edac_cap = EDAC_FLAG_SECDED;
/* adjust FLAGS */
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.1.2.6 $";
mci->ctl_name = i82860_devs[dev_idx].ctl_name;
mci->edac_check = i82860_check;
@@ -253,7 +253,7 @@
MODULE_DEVICE_TABLE(pci, i82860_pci_tbl);
static struct pci_driver i82860_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = i82860_init_one,
.remove = __devexit_p(i82860_remove_one),
.id_table = i82860_pci_tbl,
diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c
index 0e22c66..a547c30 100644
--- a/drivers/edac/i82875p_edac.c
+++ b/drivers/edac/i82875p_edac.c
@@ -357,7 +357,7 @@
mci->edac_cap = EDAC_FLAG_UNKNOWN;
/* adjust FLAGS */
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.11 $";
mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
mci->edac_check = i82875p_check;
@@ -483,7 +483,7 @@
static struct pci_driver i82875p_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = i82875p_init_one,
.remove = __devexit_p(i82875p_remove_one),
.id_table = i82875p_pci_tbl,
diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c
index 27d16dc..ac13598 100644
--- a/drivers/edac/r82600_edac.c
+++ b/drivers/edac/r82600_edac.c
@@ -265,7 +265,7 @@
} else
mci->edac_cap = EDAC_FLAG_NONE;
- mci->mod_name = BS_MOD_STR;
+ mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.1.2.6 $";
mci->ctl_name = "R82600";
mci->edac_check = r82600_check;
@@ -376,7 +376,7 @@
static struct pci_driver r82600_driver = {
- .name = BS_MOD_STR,
+ .name = EDAC_MOD_STR,
.probe = r82600_init_one,
.remove = __devexit_p(r82600_remove_one),
.id_table = r82600_pci_tbl,