[PATCH] I2C: Kill common macro abuse in chip drivers
This patch kills a common macro abuse in i2c chip drivers: defining
ALARMS_FROM_REG returning its argument unchanged. Dropping the macro
makes the code somewhat more readable IMHO.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/i2c/chips/asb100.c b/drivers/i2c/chips/asb100.c
index 342b1a9..70d996d 100644
--- a/drivers/i2c/chips/asb100.c
+++ b/drivers/i2c/chips/asb100.c
@@ -169,8 +169,6 @@
return reg * 16;
}
-#define ALARMS_FROM_REG(val) (val)
-
#define DIV_FROM_REG(val) (1 << (val))
/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
@@ -557,7 +555,7 @@
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
struct asb100_data *data = asb100_update_device(dev);
- return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->alarms));
+ return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
diff --git a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c
index 16dbfd8..7984bf9 100644
--- a/drivers/i2c/chips/it87.c
+++ b/drivers/i2c/chips/it87.c
@@ -172,8 +172,6 @@
((val)+500)/1000),-128,127))
#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
-#define ALARMS_FROM_REG(val) (val)
-
#define PWM_TO_REG(val) ((val) >> 1)
#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
@@ -665,7 +663,7 @@
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
struct it87_data *data = it87_update_device(dev);
- return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
+ return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
diff --git a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c
index d618d10..b4d7fd4 100644
--- a/drivers/i2c/chips/lm85.c
+++ b/drivers/i2c/chips/lm85.c
@@ -284,8 +284,6 @@
/* i2c-vid.h defines vid_from_reg() */
#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm)))
-#define ALARMS_FROM_REG(val) (val)
-
/* Unlike some other drivers we DO NOT set initial limits. Use
* the config file to set limits. Some users have reported
* motherboards shutting down when we set limits in a previous
@@ -480,7 +478,7 @@
static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct lm85_data *data = lm85_update_device(dev);
- return sprintf(buf, "%ld\n", (long) ALARMS_FROM_REG(data->alarms));
+ return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
diff --git a/drivers/i2c/chips/via686a.c b/drivers/i2c/chips/via686a.c
index e7a6862..3140ae8 100644
--- a/drivers/i2c/chips/via686a.c
+++ b/drivers/i2c/chips/via686a.c
@@ -292,8 +292,6 @@
tempLUT[eightBits + 1] * twoBits) * 25;
}
-#define ALARMS_FROM_REG(val) (val)
-
#define DIV_FROM_REG(val) (1 << (val))
#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
@@ -570,7 +568,7 @@
/* Alarms */
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) {
struct via686a_data *data = via686a_update_device(dev);
- return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
+ return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
diff --git a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c
index f47aee8..4a5b06b 100644
--- a/drivers/i2c/chips/w83781d.c
+++ b/drivers/i2c/chips/w83781d.c
@@ -172,7 +172,6 @@
: (val)) / 1000, 0, 0xff))
#define TEMP_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
-#define ALARMS_FROM_REG(val) (val)
#define PWM_FROM_REG(val) (val)
#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
#define BEEP_MASK_FROM_REG(val,type) ((type) == as99127f ? \
@@ -523,7 +522,7 @@
show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83781d_data *data = w83781d_update_device(dev);
- return sprintf(buf, "%ld\n", (long) ALARMS_FROM_REG(data->alarms));
+ return sprintf(buf, "%u\n", data->alarms);
}
static