| /* savage_state.c -- State and drawing support for Savage |
| * |
| * Copyright 2004 Felix Kuehling |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sub license, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF |
| * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
| * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| #include "drmP.h" |
| #include "savage_drm.h" |
| #include "savage_drv.h" |
| |
| void savage_emit_clip_rect_s3d(drm_savage_private_t * dev_priv, |
| const drm_clip_rect_t * pbox) |
| { |
| uint32_t scstart = dev_priv->state.s3d.new_scstart; |
| uint32_t scend = dev_priv->state.s3d.new_scend; |
| scstart = (scstart & ~SAVAGE_SCISSOR_MASK_S3D) | |
| ((uint32_t) pbox->x1 & 0x000007ff) | |
| (((uint32_t) pbox->y1 << 16) & 0x07ff0000); |
| scend = (scend & ~SAVAGE_SCISSOR_MASK_S3D) | |
| (((uint32_t) pbox->x2 - 1) & 0x000007ff) | |
| ((((uint32_t) pbox->y2 - 1) << 16) & 0x07ff0000); |
| if (scstart != dev_priv->state.s3d.scstart || |
| scend != dev_priv->state.s3d.scend) { |
| DMA_LOCALS; |
| BEGIN_DMA(4); |
| DMA_WRITE(BCI_CMD_WAIT | BCI_CMD_WAIT_3D); |
| DMA_SET_REGISTERS(SAVAGE_SCSTART_S3D, 2); |
| DMA_WRITE(scstart); |
| DMA_WRITE(scend); |
| dev_priv->state.s3d.scstart = scstart; |
| dev_priv->state.s3d.scend = scend; |
| dev_priv->waiting = 1; |
| DMA_COMMIT(); |
| } |
| } |
| |
| void savage_emit_clip_rect_s4(drm_savage_private_t * dev_priv, |
| const drm_clip_rect_t * pbox) |
| { |
| uint32_t drawctrl0 = dev_priv->state.s4.new_drawctrl0; |
| uint32_t drawctrl1 = dev_priv->state.s4.new_drawctrl1; |
| drawctrl0 = (drawctrl0 & ~SAVAGE_SCISSOR_MASK_S4) | |
| ((uint32_t) pbox->x1 & 0x000007ff) | |
| (((uint32_t) pbox->y1 << 12) & 0x00fff000); |
| drawctrl1 = (drawctrl1 & ~SAVAGE_SCISSOR_MASK_S4) | |
| (((uint32_t) pbox->x2 - 1) & 0x000007ff) | |
| ((((uint32_t) pbox->y2 - 1) << 12) & 0x00fff000); |
| if (drawctrl0 != dev_priv->state.s4.drawctrl0 || |
| drawctrl1 != dev_priv->state.s4.drawctrl1) { |
| DMA_LOCALS; |
| BEGIN_DMA(4); |
| DMA_WRITE(BCI_CMD_WAIT | BCI_CMD_WAIT_3D); |
| DMA_SET_REGISTERS(SAVAGE_DRAWCTRL0_S4, 2); |
| DMA_WRITE(drawctrl0); |
| DMA_WRITE(drawctrl1); |
| dev_priv->state.s4.drawctrl0 = drawctrl0; |
| dev_priv->state.s4.drawctrl1 = drawctrl1; |
| dev_priv->waiting = 1; |
| DMA_COMMIT(); |
| } |
| } |
| |
| static int savage_verify_texaddr(drm_savage_private_t * dev_priv, int unit, |
| uint32_t addr) |
| { |
| if ((addr & 6) != 2) { /* reserved bits */ |
| DRM_ERROR("bad texAddr%d %08x (reserved bits)\n", unit, addr); |
| return DRM_ERR(EINVAL); |
| } |
| if (!(addr & 1)) { /* local */ |
| addr &= ~7; |
| if (addr < dev_priv->texture_offset || |
| addr >= dev_priv->texture_offset + dev_priv->texture_size) { |
| DRM_ERROR |
| ("bad texAddr%d %08x (local addr out of range)\n", |
| unit, addr); |
| return DRM_ERR(EINVAL); |
| } |
| } else { /* AGP */ |
| if (!dev_priv->agp_textures) { |
| DRM_ERROR("bad texAddr%d %08x (AGP not available)\n", |
| unit, addr); |
| return DRM_ERR(EINVAL); |
| } |
| addr &= ~7; |
| if (addr < dev_priv->agp_textures->offset || |
| addr >= (dev_priv->agp_textures->offset + |
| dev_priv->agp_textures->size)) { |
| DRM_ERROR |
| ("bad texAddr%d %08x (AGP addr out of range)\n", |
| unit, addr); |
| return DRM_ERR(EINVAL); |
| } |
| } |
| return 0; |
| } |
| |
| #define SAVE_STATE(reg,where) \ |
| if(start <= reg && start+count > reg) \ |
| dev_priv->state.where = regs[reg - start] |
| #define SAVE_STATE_MASK(reg,where,mask) do { \ |
| if(start <= reg && start+count > reg) { \ |
| uint32_t tmp; \ |
| tmp = regs[reg - start]; \ |
| dev_priv->state.where = (tmp & (mask)) | \ |
| (dev_priv->state.where & ~(mask)); \ |
| } \ |
| } while (0) |
| |
| static int savage_verify_state_s3d(drm_savage_private_t * dev_priv, |
| unsigned int start, unsigned int count, |
| const uint32_t *regs) |
| { |
| if (start < SAVAGE_TEXPALADDR_S3D || |
| start + count - 1 > SAVAGE_DESTTEXRWWATERMARK_S3D) { |
| DRM_ERROR("invalid register range (0x%04x-0x%04x)\n", |
| start, start + count - 1); |
| return DRM_ERR(EINVAL); |
| } |
| |
| SAVE_STATE_MASK(SAVAGE_SCSTART_S3D, s3d.new_scstart, |
| ~SAVAGE_SCISSOR_MASK_S3D); |
| SAVE_STATE_MASK(SAVAGE_SCEND_S3D, s3d.new_scend, |
| ~SAVAGE_SCISSOR_MASK_S3D); |
| |
| /* if any texture regs were changed ... */ |
| if (start <= SAVAGE_TEXCTRL_S3D && |
| start + count > SAVAGE_TEXPALADDR_S3D) { |
| /* ... check texture state */ |
| SAVE_STATE(SAVAGE_TEXCTRL_S3D, s3d.texctrl); |
| SAVE_STATE(SAVAGE_TEXADDR_S3D, s3d.texaddr); |
| if (dev_priv->state.s3d.texctrl & SAVAGE_TEXCTRL_TEXEN_MASK) |
| return savage_verify_texaddr(dev_priv, 0, |
| dev_priv->state.s3d.texaddr); |
| } |
| |
| return 0; |
| } |
| |
| static int savage_verify_state_s4(drm_savage_private_t * dev_priv, |
| unsigned int start, unsigned int count, |
| const uint32_t *regs) |
| { |
| int ret = 0; |
| |
| if (start < SAVAGE_DRAWLOCALCTRL_S4 || |
| start + count - 1 > SAVAGE_TEXBLENDCOLOR_S4) { |
| DRM_ERROR("invalid register range (0x%04x-0x%04x)\n", |
| start, start + count - 1); |
| return DRM_ERR(EINVAL); |
| } |
| |
| SAVE_STATE_MASK(SAVAGE_DRAWCTRL0_S4, s4.new_drawctrl0, |
| ~SAVAGE_SCISSOR_MASK_S4); |
| SAVE_STATE_MASK(SAVAGE_DRAWCTRL1_S4, s4.new_drawctrl1, |
| ~SAVAGE_SCISSOR_MASK_S4); |
| |
| /* if any texture regs were changed ... */ |
| if (start <= SAVAGE_TEXDESCR_S4 && |
| start + count > SAVAGE_TEXPALADDR_S4) { |
| /* ... check texture state */ |
| SAVE_STATE(SAVAGE_TEXDESCR_S4, s4.texdescr); |
| SAVE_STATE(SAVAGE_TEXADDR0_S4, s4.texaddr0); |
| SAVE_STATE(SAVAGE_TEXADDR1_S4, s4.texaddr1); |
| if (dev_priv->state.s4.texdescr & SAVAGE_TEXDESCR_TEX0EN_MASK) |
| ret |= savage_verify_texaddr(dev_priv, 0, |
| dev_priv->state.s4.texaddr0); |
| if (dev_priv->state.s4.texdescr & SAVAGE_TEXDESCR_TEX1EN_MASK) |
| ret |= savage_verify_texaddr(dev_priv, 1, |
| dev_priv->state.s4.texaddr1); |
| } |
| |
| return ret; |
| } |
| |
| #undef SAVE_STATE |
| #undef SAVE_STATE_MASK |
| |
| static int savage_dispatch_state(drm_savage_private_t * dev_priv, |
| const drm_savage_cmd_header_t * cmd_header, |
| const uint32_t *regs) |
| { |
| unsigned int count = cmd_header->state.count; |
| unsigned int start = cmd_header->state.start; |
| unsigned int count2 = 0; |
| unsigned int bci_size; |
| int ret; |
| DMA_LOCALS; |
| |
| if (!count) |
| return 0; |
| |
| if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { |
| ret = savage_verify_state_s3d(dev_priv, start, count, regs); |
| if (ret != 0) |
| return ret; |
| /* scissor regs are emitted in savage_dispatch_draw */ |
| if (start < SAVAGE_SCSTART_S3D) { |
| if (start + count > SAVAGE_SCEND_S3D + 1) |
| count2 = count - (SAVAGE_SCEND_S3D + 1 - start); |
| if (start + count > SAVAGE_SCSTART_S3D) |
| count = SAVAGE_SCSTART_S3D - start; |
| } else if (start <= SAVAGE_SCEND_S3D) { |
| if (start + count > SAVAGE_SCEND_S3D + 1) { |
| count -= SAVAGE_SCEND_S3D + 1 - start; |
| start = SAVAGE_SCEND_S3D + 1; |
| } else |
| return 0; |
| } |
| } else { |
| ret = savage_verify_state_s4(dev_priv, start, count, regs); |
| if (ret != 0) |
| return ret; |
| /* scissor regs are emitted in savage_dispatch_draw */ |
| if (start < SAVAGE_DRAWCTRL0_S4) { |
| if (start + count > SAVAGE_DRAWCTRL1_S4 + 1) |
| count2 = count - |
| (SAVAGE_DRAWCTRL1_S4 + 1 - start); |
| if (start + count > SAVAGE_DRAWCTRL0_S4) |
| count = SAVAGE_DRAWCTRL0_S4 - start; |
| } else if (start <= SAVAGE_DRAWCTRL1_S4) { |
| if (start + count > SAVAGE_DRAWCTRL1_S4 + 1) { |
| count -= SAVAGE_DRAWCTRL1_S4 + 1 - start; |
| start = SAVAGE_DRAWCTRL1_S4 + 1; |
| } else |
| return 0; |
| } |
| } |
| |
| bci_size = count + (count + 254) / 255 + count2 + (count2 + 254) / 255; |
| |
| if (cmd_header->state.global) { |
| BEGIN_DMA(bci_size + 1); |
| DMA_WRITE(BCI_CMD_WAIT | BCI_CMD_WAIT_3D); |
| dev_priv->waiting = 1; |
| } else { |
| BEGIN_DMA(bci_size); |
| } |
| |
| do { |
| while (count > 0) { |
| unsigned int n = count < 255 ? count : 255; |
| DMA_SET_REGISTERS(start, n); |
| DMA_COPY(regs, n); |
| count -= n; |
| start += n; |
| regs += n; |
| } |
| start += 2; |
| regs += 2; |
| count = count2; |
| count2 = 0; |
| } while (count); |
| |
| DMA_COMMIT(); |
| |
| return 0; |
| } |
| |
| static int savage_dispatch_dma_prim(drm_savage_private_t * dev_priv, |
| const drm_savage_cmd_header_t * cmd_header, |
| const drm_buf_t * dmabuf) |
| { |
| unsigned char reorder = 0; |
| unsigned int prim = cmd_header->prim.prim; |
| unsigned int skip = cmd_header->prim.skip; |
| unsigned int n = cmd_header->prim.count; |
| unsigned int start = cmd_header->prim.start; |
| unsigned int i; |
| BCI_LOCALS; |
| |
| if (!dmabuf) { |
| DRM_ERROR("called without dma buffers!\n"); |
| return DRM_ERR(EINVAL); |
| } |
| |
| if (!n) |
| return 0; |
| |
| switch (prim) { |
| case SAVAGE_PRIM_TRILIST_201: |
| reorder = 1; |
| prim = SAVAGE_PRIM_TRILIST; |
| case SAVAGE_PRIM_TRILIST: |
| if (n % 3 != 0) { |
| DRM_ERROR("wrong number of vertices %u in TRILIST\n", |
| n); |
| return DRM_ERR(EINVAL); |
| } |
| break; |
| case SAVAGE_PRIM_TRISTRIP: |
| case SAVAGE_PRIM_TRIFAN: |
| if (n < 3) { |
| DRM_ERROR |
| ("wrong number of vertices %u in TRIFAN/STRIP\n", |
| n); |
| return DRM_ERR(EINVAL); |
| } |
| break; |
| default: |
| DRM_ERROR("invalid primitive type %u\n", prim); |
| return DRM_ERR(EINVAL); |
| } |
| |
| if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { |
| if (skip != 0) { |
| DRM_ERROR("invalid skip flags 0x%04x for DMA\n", skip); |
| return DRM_ERR(EINVAL); |
| } |
| } else { |
| unsigned int size = 10 - (skip & 1) - (skip >> 1 & 1) - |
| (skip >> 2 & 1) - (skip >> 3 & 1) - (skip >> 4 & 1) - |
| (skip >> 5 & 1) - (skip >> 6 & 1) - (skip >> 7 & 1); |
| if (skip > SAVAGE_SKIP_ALL_S4 || size != 8) { |
| DRM_ERROR("invalid skip flags 0x%04x for DMA\n", skip); |
| return DRM_ERR(EINVAL); |
| } |
| if (reorder) { |
| DRM_ERROR("TRILIST_201 used on Savage4 hardware\n"); |
| return DRM_ERR(EINVAL); |
| } |
| } |
| |
| if (start + n > dmabuf->total / 32) { |
| DRM_ERROR("vertex indices (%u-%u) out of range (0-%u)\n", |
| start, start + n - 1, dmabuf->total / 32); |
| return DRM_ERR(EINVAL); |
| } |
| |
| /* Vertex DMA doesn't work with command DMA at the same time, |
| * so we use BCI_... to submit commands here. Flush buffered |
| * faked DMA first. */ |
| DMA_FLUSH(); |
| |
| if (dmabuf->bus_address != dev_priv->state.common.vbaddr) { |
| BEGIN_BCI(2); |
| BCI_SET_REGISTERS(SAVAGE_VERTBUFADDR, 1); |
| BCI_WRITE(dmabuf->bus_address | dev_priv->dma_type); |
| dev_priv->state.common.vbaddr = dmabuf->bus_address; |
| } |
| if (S3_SAVAGE3D_SERIES(dev_priv->chipset) && dev_priv->waiting) { |
| /* Workaround for what looks like a hardware bug. If a |
| * WAIT_3D_IDLE was emitted some time before the |
| * indexed drawing command then the engine will lock |
| * up. There are two known workarounds: |
| * WAIT_IDLE_EMPTY or emit at least 63 NOPs. */ |
| BEGIN_BCI(63); |
| for (i = 0; i < 63; ++i) |
| BCI_WRITE(BCI_CMD_WAIT); |
| dev_priv->waiting = 0; |
| } |
| |
| prim <<= 25; |
| while (n != 0) { |
| /* Can emit up to 255 indices (85 triangles) at once. */ |
| unsigned int count = n > 255 ? 255 : n; |
| if (reorder) { |
| /* Need to reorder indices for correct flat |
| * shading while preserving the clock sense |
| * for correct culling. Only on Savage3D. */ |
| int reorder[3] = { -1, -1, -1 }; |
| reorder[start % 3] = 2; |
| |
| BEGIN_BCI((count + 1 + 1) / 2); |
| BCI_DRAW_INDICES_S3D(count, prim, start + 2); |
| |
| for (i = start + 1; i + 1 < start + count; i += 2) |
| BCI_WRITE((i + reorder[i % 3]) | |
| ((i + 1 + |
| reorder[(i + 1) % 3]) << 16)); |
| if (i < start + count) |
| BCI_WRITE(i + reorder[i % 3]); |
| } else if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { |
| BEGIN_BCI((count + 1 + 1) / 2); |
| BCI_DRAW_INDICES_S3D(count, prim, start); |
| |
| for (i = start + 1; i + 1 < start + count; i += 2) |
| BCI_WRITE(i | ((i + 1) << 16)); |
| if (i < start + count) |
| BCI_WRITE(i); |
| } else { |
| BEGIN_BCI((count + 2 + 1) / 2); |
| BCI_DRAW_INDICES_S4(count, prim, skip); |
| |
| for (i = start; i + 1 < start + count; i += 2) |
| BCI_WRITE(i | ((i + 1) << 16)); |
| if (i < start + count) |
| BCI_WRITE(i); |
| } |
| |
| start += count; |
| n -= count; |
| |
| prim |= BCI_CMD_DRAW_CONT; |
| } |
| |
| return 0; |
| } |
| |
| static int savage_dispatch_vb_prim(drm_savage_private_t * dev_priv, |
| const drm_savage_cmd_header_t * cmd_header, |
| const uint32_t *vtxbuf, unsigned int vb_size, |
| unsigned int vb_stride) |
| { |
| unsigned char reorder = 0; |
| unsigned int prim = cmd_header->prim.prim; |
| unsigned int skip = cmd_header->prim.skip; |
| unsigned int n = cmd_header->prim.count; |
| unsigned int start = cmd_header->prim.start; |
| unsigned int vtx_size; |
| unsigned int i; |
| DMA_LOCALS; |
| |
| if (!n) |
| return 0; |
| |
| switch (prim) { |
| case SAVAGE_PRIM_TRILIST_201: |
| reorder = 1; |
| prim = SAVAGE_PRIM_TRILIST; |
| case SAVAGE_PRIM_TRILIST: |
| if (n % 3 != 0) { |
| DRM_ERROR("wrong number of vertices %u in TRILIST\n", |
| n); |
| return DRM_ERR(EINVAL); |
| } |
| break; |
| case SAVAGE_PRIM_TRISTRIP: |
| case SAVAGE_PRIM_TRIFAN: |
| if (n < 3) { |
| DRM_ERROR |
| ("wrong number of vertices %u in TRIFAN/STRIP\n", |
| n); |
| return DRM_ERR(EINVAL); |
| } |
| break; |
| default: |
| DRM_ERROR("invalid primitive type %u\n", prim); |
| return DRM_ERR(EINVAL); |
| } |
| |
| if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { |
| if (skip > SAVAGE_SKIP_ALL_S3D) { |
| DRM_ERROR("invalid skip flags 0x%04x\n", skip); |
| return DRM_ERR(EINVAL); |
| } |
| vtx_size = 8; /* full vertex */ |
| } else { |
| if (skip > SAVAGE_SKIP_ALL_S4) { |
| DRM_ERROR("invalid skip flags 0x%04x\n", skip); |
| return DRM_ERR(EINVAL); |
| } |
| vtx_size = 10; /* full vertex */ |
| } |
| |
| vtx_size -= (skip & 1) + (skip >> 1 & 1) + |
| (skip >> 2 & 1) + (skip >> 3 & 1) + (skip >> 4 & 1) + |
| (skip >> 5 & 1) + (skip >> 6 & 1) + (skip >> 7 & 1); |
| |
| if (vtx_size > vb_stride) { |
| DRM_ERROR("vertex size greater than vb stride (%u > %u)\n", |
| vtx_size, vb_stride); |
| return DRM_ERR(EINVAL); |
| } |
| |
| if (start + n > vb_size / (vb_stride * 4)) { |
| DRM_ERROR("vertex indices (%u-%u) out of range (0-%u)\n", |
| start, start + n - 1, vb_size / (vb_stride * 4)); |
| return DRM_ERR(EINVAL); |
| } |
| |
| prim <<= 25; |
| while (n != 0) { |
| /* Can emit up to 255 vertices (85 triangles) at once. */ |
| unsigned int count = n > 255 ? 255 : n; |
| if (reorder) { |
| /* Need to reorder vertices for correct flat |
| * shading while preserving the clock sense |
| * for correct culling. Only on Savage3D. */ |
| int reorder[3] = { -1, -1, -1 }; |
| reorder[start % 3] = 2; |
| |
| BEGIN_DMA(count * vtx_size + 1); |
| DMA_DRAW_PRIMITIVE(count, prim, skip); |
| |
| for (i = start; i < start + count; ++i) { |
| unsigned int j = i + reorder[i % 3]; |
| DMA_COPY(&vtxbuf[vb_stride * j], vtx_size); |
| } |
| |
| DMA_COMMIT(); |
| } else { |
| BEGIN_DMA(count * vtx_size + 1); |
| DMA_DRAW_PRIMITIVE(count, prim, skip); |
| |
| if (vb_stride == vtx_size) { |
| DMA_COPY(&vtxbuf[vb_stride * start], |
| vtx_size * count); |
| } else { |
| for (i = start; i < start + count; ++i) { |
| DMA_COPY(&vtxbuf [vb_stride * i], |
| vtx_size); |
| } |
| } |
| |
| DMA_COMMIT(); |
| } |
| |
| start += count; |
| n -= count; |
| |
| prim |= BCI_CMD_DRAW_CONT; |
| } |
| |
| return 0; |
| } |
| |
| static int savage_dispatch_dma_idx(drm_savage_private_t * dev_priv, |
| const drm_savage_cmd_header_t * cmd_header, |
| const uint16_t *idx, |
| const drm_buf_t * dmabuf) |
| { |
| unsigned char reorder = 0; |
| unsigned int prim = cmd_header->idx.prim; |
| unsigned int skip = cmd_header->idx.skip; |
| unsigned int n = cmd_header->idx.count; |
| unsigned int i; |
| BCI_LOCALS; |
| |
| if (!dmabuf) { |
| DRM_ERROR("called without dma buffers!\n"); |
| return DRM_ERR(EINVAL); |
| } |
| |
| if (!n) |
| return 0; |
| |
| switch (prim) { |
| case SAVAGE_PRIM_TRILIST_201: |
| reorder = 1; |
| prim = SAVAGE_PRIM_TRILIST; |
| case SAVAGE_PRIM_TRILIST: |
| if (n % 3 != 0) { |
| DRM_ERROR("wrong number of indices %u in TRILIST\n", n); |
| return DRM_ERR(EINVAL); |
| } |
| break; |
| case SAVAGE_PRIM_TRISTRIP: |
| case SAVAGE_PRIM_TRIFAN: |
| if (n < 3) { |
| DRM_ERROR |
| ("wrong number of indices %u in TRIFAN/STRIP\n", n); |
| return DRM_ERR(EINVAL); |
| } |
| break; |
| default: |
| DRM_ERROR("invalid primitive type %u\n", prim); |
| return DRM_ERR(EINVAL); |
| } |
| |
| if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { |
| if (skip != 0) { |
| DRM_ERROR("invalid skip flags 0x%04x for DMA\n", skip); |
| return DRM_ERR(EINVAL); |
| } |
| } else { |
| unsigned int size = 10 - (skip & 1) - (skip >> 1 & 1) - |
| (skip >> 2 & 1) - (skip >> 3 & 1) - (skip >> 4 & 1) - |
| (skip >> 5 & 1) - (skip >> 6 & 1) - (skip >> 7 & 1); |
| if (skip > SAVAGE_SKIP_ALL_S4 || size != 8) { |
| DRM_ERROR("invalid skip flags 0x%04x for DMA\n", skip); |
| return DRM_ERR(EINVAL); |
| } |
| if (reorder) { |
| DRM_ERROR("TRILIST_201 used on Savage4 hardware\n"); |
| return DRM_ERR(EINVAL); |
| } |
| } |
| |
| /* Vertex DMA doesn't work with command DMA at the same time, |
| * so we use BCI_... to submit commands here. Flush buffered |
| * faked DMA first. */ |
| DMA_FLUSH(); |
| |
| if (dmabuf->bus_address != dev_priv->state.common.vbaddr) { |
| BEGIN_BCI(2); |
| BCI_SET_REGISTERS(SAVAGE_VERTBUFADDR, 1); |
| BCI_WRITE(dmabuf->bus_address | dev_priv->dma_type); |
| dev_priv->state.common.vbaddr = dmabuf->bus_address; |
| } |
| if (S3_SAVAGE3D_SERIES(dev_priv->chipset) && dev_priv->waiting) { |
| /* Workaround for what looks like a hardware bug. If a |
| * WAIT_3D_IDLE was emitted some time before the |
| * indexed drawing command then the engine will lock |
| * up. There are two known workarounds: |
| * WAIT_IDLE_EMPTY or emit at least 63 NOPs. */ |
| BEGIN_BCI(63); |
| for (i = 0; i < 63; ++i) |
| BCI_WRITE(BCI_CMD_WAIT); |
| dev_priv->waiting = 0; |
| } |
| |
| prim <<= 25; |
| while (n != 0) { |
| /* Can emit up to 255 indices (85 triangles) at once. */ |
| unsigned int count = n > 255 ? 255 : n; |
| |
| /* check indices */ |
| for (i = 0; i < count; ++i) { |
| if (idx[i] > dmabuf->total / 32) { |
| DRM_ERROR("idx[%u]=%u out of range (0-%u)\n", |
| i, idx[i], dmabuf->total / 32); |
| return DRM_ERR(EINVAL); |
| } |
| } |
| |
| if (reorder) { |
| /* Need to reorder indices for correct flat |
| * shading while preserving the clock sense |
| * for correct culling. Only on Savage3D. */ |
| int reorder[3] = { 2, -1, -1 }; |
| |
| BEGIN_BCI((count + 1 + 1) / 2); |
| BCI_DRAW_INDICES_S3D(count, prim, idx[2]); |
| |
| for (i = 1; i + 1 < count; i += 2) |
| BCI_WRITE(idx[i + reorder[i % 3]] | |
| (idx[i + 1 + |
| reorder[(i + 1) % 3]] << 16)); |
| if (i < count) |
| BCI_WRITE(idx[i + reorder[i % 3]]); |
| } else if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { |
| BEGIN_BCI((count + 1 + 1) / 2); |
| BCI_DRAW_INDICES_S3D(count, prim, idx[0]); |
| |
| for (i = 1; i + 1 < count; i += 2) |
| BCI_WRITE(idx[i] | (idx[i + 1] << 16)); |
| if (i < count) |
| BCI_WRITE(idx[i]); |
| } else { |
| BEGIN_BCI((count + 2 + 1) / 2); |
| BCI_DRAW_INDICES_S4(count, prim, skip); |
| |
| for (i = 0; i + 1 < count; i += 2) |
| BCI_WRITE(idx[i] | (idx[i + 1] << 16)); |
| if (i < count) |
| BCI_WRITE(idx[i]); |
| } |
| |
| idx += count; |
| n -= count; |
| |
| prim |= BCI_CMD_DRAW_CONT; |
| } |
| |
| return 0; |
| } |
| |
| static int savage_dispatch_vb_idx(drm_savage_private_t * dev_priv, |
| const drm_savage_cmd_header_t * cmd_header, |
| const uint16_t *idx, |
| const uint32_t *vtxbuf, |
| unsigned int vb_size, unsigned int vb_stride) |
| { |
| unsigned char reorder = 0; |
| unsigned int prim = cmd_header->idx.prim; |
| unsigned int skip = cmd_header->idx.skip; |
| unsigned int n = cmd_header->idx.count; |
| unsigned int vtx_size; |
| unsigned int i; |
| DMA_LOCALS; |
| |
| if (!n) |
| return 0; |
| |
| switch (prim) { |
| case SAVAGE_PRIM_TRILIST_201: |
| reorder = 1; |
| prim = SAVAGE_PRIM_TRILIST; |
| case SAVAGE_PRIM_TRILIST: |
| if (n % 3 != 0) { |
| DRM_ERROR("wrong number of indices %u in TRILIST\n", n); |
| return DRM_ERR(EINVAL); |
| } |
| break; |
| case SAVAGE_PRIM_TRISTRIP: |
| case SAVAGE_PRIM_TRIFAN: |
| if (n < 3) { |
| DRM_ERROR |
| ("wrong number of indices %u in TRIFAN/STRIP\n", n); |
| return DRM_ERR(EINVAL); |
| } |
| break; |
| default: |
| DRM_ERROR("invalid primitive type %u\n", prim); |
| return DRM_ERR(EINVAL); |
| } |
| |
| if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) { |
| if (skip > SAVAGE_SKIP_ALL_S3D) { |
| DRM_ERROR("invalid skip flags 0x%04x\n", skip); |
| return DRM_ERR(EINVAL); |
| } |
| vtx_size = 8; /* full vertex */ |
| } else { |
| if (skip > SAVAGE_SKIP_ALL_S4) { |
| DRM_ERROR("invalid skip flags 0x%04x\n", skip); |
| return DRM_ERR(EINVAL); |
| } |
| vtx_size = 10; /* full vertex */ |
| } |
| |
| vtx_size -= (skip & 1) + (skip >> 1 & 1) + |
| (skip >> 2 & 1) + (skip >> 3 & 1) + (skip >> 4 & 1) + |
| (skip >> 5 & 1) + (skip >> 6 & 1) + (skip >> 7 & 1); |
| |
| if (vtx_size > vb_stride) { |
| DRM_ERROR("vertex size greater than vb stride (%u > %u)\n", |
| vtx_size, vb_stride); |
| return DRM_ERR(EINVAL); |
| } |
| |
| prim <<= 25; |
| while (n != 0) { |
| /* Can emit up to 255 vertices (85 triangles) at once. */ |
| unsigned int count = n > 255 ? 255 : n; |
| |
| /* Check indices */ |
| for (i = 0; i < count; ++i) { |
| if (idx[i] > vb_size / (vb_stride * 4)) { |
| DRM_ERROR("idx[%u]=%u out of range (0-%u)\n", |
| i, idx[i], vb_size / (vb_stride * 4)); |
| return DRM_ERR(EINVAL); |
| } |
| } |
| |
| if (reorder) { |
| /* Need to reorder vertices for correct flat |
| * shading while preserving the clock sense |
| * for correct culling. Only on Savage3D. */ |
| int reorder[3] = { 2, -1, -1 }; |
| |
| BEGIN_DMA(count * vtx_size + 1); |
| DMA_DRAW_PRIMITIVE(count, prim, skip); |
| |
| for (i = 0; i < count; ++i) { |
| unsigned int j = idx[i + reorder[i % 3]]; |
| DMA_COPY(&vtxbuf[vb_stride * j], vtx_size); |
| } |
| |
| DMA_COMMIT(); |
| } else { |
| BEGIN_DMA(count * vtx_size + 1); |
| DMA_DRAW_PRIMITIVE(count, prim, skip); |
| |
| for (i = 0; i < count; ++i) { |
| unsigned int j = idx[i]; |
| DMA_COPY(&vtxbuf[vb_stride * j], vtx_size); |
| } |
| |
| DMA_COMMIT(); |
| } |
| |
| idx += count; |
| n -= count; |
| |
| prim |= BCI_CMD_DRAW_CONT; |
| } |
| |
| return 0; |
| } |
| |
| static int savage_dispatch_clear(drm_savage_private_t * dev_priv, |
| const drm_savage_cmd_header_t * cmd_header, |
| const drm_savage_cmd_header_t *data, |
| unsigned int nbox, |
| const drm_clip_rect_t *boxes) |
| { |
| unsigned int flags = cmd_header->clear0.flags; |
| unsigned int clear_cmd; |
| unsigned int i, nbufs; |
| DMA_LOCALS; |
| |
| if (nbox == 0) |
| return 0; |
| |
| clear_cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP | |
| BCI_CMD_SEND_COLOR | BCI_CMD_DEST_PBD_NEW; |
| BCI_CMD_SET_ROP(clear_cmd, 0xCC); |
| |
| nbufs = ((flags & SAVAGE_FRONT) ? 1 : 0) + |
| ((flags & SAVAGE_BACK) ? 1 : 0) + ((flags & SAVAGE_DEPTH) ? 1 : 0); |
| if (nbufs == 0) |
| return 0; |
| |
| if (data->clear1.mask != 0xffffffff) { |
| /* set mask */ |
| BEGIN_DMA(2); |
| DMA_SET_REGISTERS(SAVAGE_BITPLANEWTMASK, 1); |
| DMA_WRITE(data->clear1.mask); |
| DMA_COMMIT(); |
| } |
| for (i = 0; i < nbox; ++i) { |
| unsigned int x, y, w, h; |
| unsigned int buf; |
| x = boxes[i].x1, y = boxes[i].y1; |
| w = boxes[i].x2 - boxes[i].x1; |
| h = boxes[i].y2 - boxes[i].y1; |
| BEGIN_DMA(nbufs * 6); |
| for (buf = SAVAGE_FRONT; buf <= SAVAGE_DEPTH; buf <<= 1) { |
| if (!(flags & buf)) |
| continue; |
| DMA_WRITE(clear_cmd); |
| switch (buf) { |
| case SAVAGE_FRONT: |
| DMA_WRITE(dev_priv->front_offset); |
| DMA_WRITE(dev_priv->front_bd); |
| break; |
| case SAVAGE_BACK: |
| DMA_WRITE(dev_priv->back_offset); |
| DMA_WRITE(dev_priv->back_bd); |
| break; |
| case SAVAGE_DEPTH: |
| DMA_WRITE(dev_priv->depth_offset); |
| DMA_WRITE(dev_priv->depth_bd); |
| break; |
| } |
| DMA_WRITE(data->clear1.value); |
| DMA_WRITE(BCI_X_Y(x, y)); |
| DMA_WRITE(BCI_W_H(w, h)); |
| } |
| DMA_COMMIT(); |
| } |
| if (data->clear1.mask != 0xffffffff) { |
| /* reset mask */ |
| BEGIN_DMA(2); |
| DMA_SET_REGISTERS(SAVAGE_BITPLANEWTMASK, 1); |
| DMA_WRITE(0xffffffff); |
| DMA_COMMIT(); |
| } |
| |
| return 0; |
| } |
| |
| static int savage_dispatch_swap(drm_savage_private_t * dev_priv, |
| unsigned int nbox, const drm_clip_rect_t *boxes) |
| { |
| unsigned int swap_cmd; |
| unsigned int i; |
| DMA_LOCALS; |
| |
| if (nbox == 0) |
| return 0; |
| |
| swap_cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP | |
| BCI_CMD_SRC_PBD_COLOR_NEW | BCI_CMD_DEST_GBD; |
| BCI_CMD_SET_ROP(swap_cmd, 0xCC); |
| |
| for (i = 0; i < nbox; ++i) { |
| BEGIN_DMA(6); |
| DMA_WRITE(swap_cmd); |
| DMA_WRITE(dev_priv->back_offset); |
| DMA_WRITE(dev_priv->back_bd); |
| DMA_WRITE(BCI_X_Y(boxes[i].x1, boxes[i].y1)); |
| DMA_WRITE(BCI_X_Y(boxes[i].x1, boxes[i].y1)); |
| DMA_WRITE(BCI_W_H(boxes[i].x2 - boxes[i].x1, |
| boxes[i].y2 - boxes[i].y1)); |
| DMA_COMMIT(); |
| } |
| |
| return 0; |
| } |
| |
| static int savage_dispatch_draw(drm_savage_private_t * dev_priv, |
| const drm_savage_cmd_header_t *start, |
| const drm_savage_cmd_header_t *end, |
| const drm_buf_t * dmabuf, |
| const unsigned int *vtxbuf, |
| unsigned int vb_size, unsigned int vb_stride, |
| unsigned int nbox, |
| const drm_clip_rect_t *boxes) |
| { |
| unsigned int i, j; |
| int ret; |
| |
| for (i = 0; i < nbox; ++i) { |
| const drm_savage_cmd_header_t *cmdbuf; |
| dev_priv->emit_clip_rect(dev_priv, &boxes[i]); |
| |
| cmdbuf = start; |
| while (cmdbuf < end) { |
| drm_savage_cmd_header_t cmd_header; |
| cmd_header = *cmdbuf; |
| cmdbuf++; |
| switch (cmd_header.cmd.cmd) { |
| case SAVAGE_CMD_DMA_PRIM: |
| ret = savage_dispatch_dma_prim( |
| dev_priv, &cmd_header, dmabuf); |
| break; |
| case SAVAGE_CMD_VB_PRIM: |
| ret = savage_dispatch_vb_prim( |
| dev_priv, &cmd_header, |
| vtxbuf, vb_size, vb_stride); |
| break; |
| case SAVAGE_CMD_DMA_IDX: |
| j = (cmd_header.idx.count + 3) / 4; |
| /* j was check in savage_bci_cmdbuf */ |
| ret = savage_dispatch_dma_idx(dev_priv, |
| &cmd_header, (const uint16_t *)cmdbuf, |
| dmabuf); |
| cmdbuf += j; |
| break; |
| case SAVAGE_CMD_VB_IDX: |
| j = (cmd_header.idx.count + 3) / 4; |
| /* j was check in savage_bci_cmdbuf */ |
| ret = savage_dispatch_vb_idx(dev_priv, |
| &cmd_header, (const uint16_t *)cmdbuf, |
| (const uint32_t *)vtxbuf, vb_size, |
| vb_stride); |
| cmdbuf += j; |
| break; |
| default: |
| /* What's the best return code? EFAULT? */ |
| DRM_ERROR("IMPLEMENTATION ERROR: " |
| "non-drawing-command %d\n", |
| cmd_header.cmd.cmd); |
| return DRM_ERR(EINVAL); |
| } |
| |
| if (ret != 0) |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int savage_bci_cmdbuf(DRM_IOCTL_ARGS) |
| { |
| DRM_DEVICE; |
| drm_savage_private_t *dev_priv = dev->dev_private; |
| drm_device_dma_t *dma = dev->dma; |
| drm_buf_t *dmabuf; |
| drm_savage_cmdbuf_t cmdbuf; |
| drm_savage_cmd_header_t *kcmd_addr = NULL; |
| drm_savage_cmd_header_t *first_draw_cmd; |
| unsigned int *kvb_addr = NULL; |
| drm_clip_rect_t *kbox_addr = NULL; |
| unsigned int i, j; |
| int ret = 0; |
| |
| DRM_DEBUG("\n"); |
| |
| LOCK_TEST_WITH_RETURN(dev, filp); |
| |
| DRM_COPY_FROM_USER_IOCTL(cmdbuf, (drm_savage_cmdbuf_t __user *) data, |
| sizeof(cmdbuf)); |
| |
| if (dma && dma->buflist) { |
| if (cmdbuf.dma_idx > dma->buf_count) { |
| DRM_ERROR |
| ("vertex buffer index %u out of range (0-%u)\n", |
| cmdbuf.dma_idx, dma->buf_count - 1); |
| return DRM_ERR(EINVAL); |
| } |
| dmabuf = dma->buflist[cmdbuf.dma_idx]; |
| } else { |
| dmabuf = NULL; |
| } |
| |
| /* Copy the user buffers into kernel temporary areas. This hasn't been |
| * a performance loss compared to VERIFYAREA_READ/ |
| * COPY_FROM_USER_UNCHECKED when done in other drivers, and is correct |
| * for locking on FreeBSD. |
| */ |
| if (cmdbuf.size) { |
| kcmd_addr = drm_alloc(cmdbuf.size * 8, DRM_MEM_DRIVER); |
| if (kcmd_addr == NULL) |
| return DRM_ERR(ENOMEM); |
| |
| if (DRM_COPY_FROM_USER(kcmd_addr, cmdbuf.cmd_addr, |
| cmdbuf.size * 8)) |
| { |
| drm_free(kcmd_addr, cmdbuf.size * 8, DRM_MEM_DRIVER); |
| return DRM_ERR(EFAULT); |
| } |
| cmdbuf.cmd_addr = kcmd_addr; |
| } |
| if (cmdbuf.vb_size) { |
| kvb_addr = drm_alloc(cmdbuf.vb_size, DRM_MEM_DRIVER); |
| if (kvb_addr == NULL) { |
| ret = DRM_ERR(ENOMEM); |
| goto done; |
| } |
| |
| if (DRM_COPY_FROM_USER(kvb_addr, cmdbuf.vb_addr, |
| cmdbuf.vb_size)) { |
| ret = DRM_ERR(EFAULT); |
| goto done; |
| } |
| cmdbuf.vb_addr = kvb_addr; |
| } |
| if (cmdbuf.nbox) { |
| kbox_addr = drm_alloc(cmdbuf.nbox * sizeof(drm_clip_rect_t), |
| DRM_MEM_DRIVER); |
| if (kbox_addr == NULL) { |
| ret = DRM_ERR(ENOMEM); |
| goto done; |
| } |
| |
| if (DRM_COPY_FROM_USER(kbox_addr, cmdbuf.box_addr, |
| cmdbuf.nbox * sizeof(drm_clip_rect_t))) { |
| ret = DRM_ERR(EFAULT); |
| goto done; |
| } |
| cmdbuf.box_addr = kbox_addr; |
| } |
| |
| /* Make sure writes to DMA buffers are finished before sending |
| * DMA commands to the graphics hardware. */ |
| DRM_MEMORYBARRIER(); |
| |
| /* Coming from user space. Don't know if the Xserver has |
| * emitted wait commands. Assuming the worst. */ |
| dev_priv->waiting = 1; |
| |
| i = 0; |
| first_draw_cmd = NULL; |
| while (i < cmdbuf.size) { |
| drm_savage_cmd_header_t cmd_header; |
| cmd_header = *(drm_savage_cmd_header_t *)cmdbuf.cmd_addr; |
| cmdbuf.cmd_addr++; |
| i++; |
| |
| /* Group drawing commands with same state to minimize |
| * iterations over clip rects. */ |
| j = 0; |
| switch (cmd_header.cmd.cmd) { |
| case SAVAGE_CMD_DMA_IDX: |
| case SAVAGE_CMD_VB_IDX: |
| j = (cmd_header.idx.count + 3) / 4; |
| if (i + j > cmdbuf.size) { |
| DRM_ERROR("indexed drawing command extends " |
| "beyond end of command buffer\n"); |
| DMA_FLUSH(); |
| return DRM_ERR(EINVAL); |
| } |
| /* fall through */ |
| case SAVAGE_CMD_DMA_PRIM: |
| case SAVAGE_CMD_VB_PRIM: |
| if (!first_draw_cmd) |
| first_draw_cmd = cmdbuf.cmd_addr - 1; |
| cmdbuf.cmd_addr += j; |
| i += j; |
| break; |
| default: |
| if (first_draw_cmd) { |
| ret = savage_dispatch_draw( |
| dev_priv, first_draw_cmd, |
| cmdbuf.cmd_addr - 1, |
| dmabuf, cmdbuf.vb_addr, cmdbuf.vb_size, |
| cmdbuf.vb_stride, |
| cmdbuf.nbox, cmdbuf.box_addr); |
| if (ret != 0) |
| return ret; |
| first_draw_cmd = NULL; |
| } |
| } |
| if (first_draw_cmd) |
| continue; |
| |
| switch (cmd_header.cmd.cmd) { |
| case SAVAGE_CMD_STATE: |
| j = (cmd_header.state.count + 1) / 2; |
| if (i + j > cmdbuf.size) { |
| DRM_ERROR("command SAVAGE_CMD_STATE extends " |
| "beyond end of command buffer\n"); |
| DMA_FLUSH(); |
| ret = DRM_ERR(EINVAL); |
| goto done; |
| } |
| ret = savage_dispatch_state(dev_priv, &cmd_header, |
| (const uint32_t *)cmdbuf.cmd_addr); |
| cmdbuf.cmd_addr += j; |
| i += j; |
| break; |
| case SAVAGE_CMD_CLEAR: |
| if (i + 1 > cmdbuf.size) { |
| DRM_ERROR("command SAVAGE_CMD_CLEAR extends " |
| "beyond end of command buffer\n"); |
| DMA_FLUSH(); |
| ret = DRM_ERR(EINVAL); |
| goto done; |
| } |
| ret = savage_dispatch_clear(dev_priv, &cmd_header, |
| cmdbuf.cmd_addr, |
| cmdbuf.nbox, cmdbuf.box_addr); |
| cmdbuf.cmd_addr++; |
| i++; |
| break; |
| case SAVAGE_CMD_SWAP: |
| ret = savage_dispatch_swap(dev_priv, cmdbuf.nbox, |
| cmdbuf.box_addr); |
| break; |
| default: |
| DRM_ERROR("invalid command 0x%x\n", cmd_header.cmd.cmd); |
| DMA_FLUSH(); |
| ret = DRM_ERR(EINVAL); |
| goto done; |
| } |
| |
| if (ret != 0) { |
| DMA_FLUSH(); |
| goto done; |
| } |
| } |
| |
| if (first_draw_cmd) { |
| ret = savage_dispatch_draw ( |
| dev_priv, first_draw_cmd, cmdbuf.cmd_addr, dmabuf, |
| cmdbuf.vb_addr, cmdbuf.vb_size, cmdbuf.vb_stride, |
| cmdbuf.nbox, cmdbuf.box_addr); |
| if (ret != 0) { |
| DMA_FLUSH(); |
| goto done; |
| } |
| } |
| |
| DMA_FLUSH(); |
| |
| if (dmabuf && cmdbuf.discard) { |
| drm_savage_buf_priv_t *buf_priv = dmabuf->dev_private; |
| uint16_t event; |
| event = savage_bci_emit_event(dev_priv, SAVAGE_WAIT_3D); |
| SET_AGE(&buf_priv->age, event, dev_priv->event_wrap); |
| savage_freelist_put(dev, dmabuf); |
| } |
| |
| done: |
| /* If we didn't need to allocate them, these'll be NULL */ |
| drm_free(kcmd_addr, cmdbuf.size * 8, DRM_MEM_DRIVER); |
| drm_free(kvb_addr, cmdbuf.vb_size, DRM_MEM_DRIVER); |
| drm_free(kbox_addr, cmdbuf.nbox * sizeof(drm_clip_rect_t), |
| DRM_MEM_DRIVER); |
| |
| return ret; |
| } |