Merge tag 'linux-can-fixes-for-4.2-20150716' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2015-07-16
this is a pull request of 2 patches by Stefan Agner. He fixes the resume
operation in the mcp251x driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 317a494..1d26d67 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1725,9 +1725,16 @@
err_undo_flags:
/* Enslave of first slave has failed and we need to fix master's mac */
- if (!bond_has_slaves(bond) &&
- ether_addr_equal_64bits(bond_dev->dev_addr, slave_dev->dev_addr))
- eth_hw_addr_random(bond_dev);
+ if (!bond_has_slaves(bond)) {
+ if (ether_addr_equal_64bits(bond_dev->dev_addr,
+ slave_dev->dev_addr))
+ eth_hw_addr_random(bond_dev);
+ if (bond_dev->type != ARPHRD_ETHER) {
+ ether_setup(bond_dev);
+ bond_dev->flags |= IFF_MASTER;
+ bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ }
+ }
return res;
}
@@ -1916,6 +1923,7 @@
bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
netdev_info(bond_dev, "Destroying bond %s\n",
bond_dev->name);
+ bond_remove_proc_entry(bond);
unregister_netdevice(bond_dev);
}
return ret;
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 972982f..079897b 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -696,9 +696,20 @@
}
/* Include the pseudo-PHY address and the broadcast PHY address to
- * divert reads towards our workaround
+ * divert reads towards our workaround. This is only required for
+ * 7445D0, since 7445E0 disconnects the internal switch pseudo-PHY such
+ * that we can use the regular SWITCH_MDIO master controller instead.
+ *
+ * By default, DSA initializes ds->phys_mii_mask to ds->phys_port_mask
+ * to have a 1:1 mapping between Port address and PHY address in order
+ * to utilize the slave_mii_bus instance to read from Port PHYs. This is
+ * not what we want here, so we initialize phys_mii_mask 0 to always
+ * utilize the "master" MDIO bus backed by the "mdio-unimac" driver.
*/
- ds->phys_mii_mask |= ((1 << BRCM_PSEUDO_PHY_ADDR) | (1 << 0));
+ if (of_machine_is_compatible("brcm,bcm7445d0"))
+ ds->phys_mii_mask |= ((1 << BRCM_PSEUDO_PHY_ADDR) | (1 << 0));
+ else
+ ds->phys_mii_mask = 0;
rev = reg_readl(priv, REG_SWITCH_REVISION);
priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index fd8547c..5613424 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -1163,7 +1163,7 @@
newfid = __ffs(ps->fid_mask);
ps->fid[port] = newfid;
- ps->fid_mask &= (1 << newfid);
+ ps->fid_mask &= ~(1 << newfid);
ps->bridge_mask[fid] &= ~(1 << port);
ps->bridge_mask[newfid] = 1 << port;
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index fd97457..0e5fde3 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -543,10 +543,9 @@
skb = priv->rx_skb[q][entry];
priv->rx_skb[q][entry] = NULL;
- dma_sync_single_for_cpu(&ndev->dev,
- le32_to_cpu(desc->dptr),
- ALIGN(PKT_BUF_SZ, 16),
- DMA_FROM_DEVICE);
+ dma_unmap_single(&ndev->dev, le32_to_cpu(desc->dptr),
+ ALIGN(PKT_BUF_SZ, 16),
+ DMA_FROM_DEVICE);
get_ts &= (q == RAVB_NC) ?
RAVB_RXTSTAMP_TYPE_V2_L2_EVENT :
~RAVB_RXTSTAMP_TYPE_V2_L2_EVENT;
@@ -584,9 +583,6 @@
if (!skb)
break; /* Better luck next round. */
ravb_set_buffer_align(skb);
- dma_unmap_single(&ndev->dev, le32_to_cpu(desc->dptr),
- ALIGN(PKT_BUF_SZ, 16),
- DMA_FROM_DEVICE);
dma_addr = dma_map_single(&ndev->dev, skb->data,
le16_to_cpu(desc->ds_cc),
DMA_FROM_DEVICE);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 63c7810..7fbca37 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1828,7 +1828,8 @@
else
vi->hdr_len = sizeof(struct virtio_net_hdr);
- if (virtio_has_feature(vdev, VIRTIO_F_ANY_LAYOUT))
+ if (virtio_has_feature(vdev, VIRTIO_F_ANY_LAYOUT) ||
+ virtio_has_feature(vdev, VIRTIO_F_VERSION_1))
vi->any_header_sg = true;
if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ))
diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c
index e893cd1..08b6204 100644
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -292,8 +292,6 @@
static const struct net_offload sit_offload = {
.callbacks = {
.gso_segment = ipv6_gso_segment,
- .gro_receive = ipv6_gro_receive,
- .gro_complete = ipv6_gro_complete,
},
};