| /* |
| * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> |
| * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> |
| * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com> |
| * |
| * Permission to use, copy, modify, and distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| * |
| */ |
| |
| /* |
| * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k |
| * maintained by Reyk Floeter |
| * |
| * I tried to document those registers by looking at ar5k code, some |
| * 802.11 (802.11e mostly) papers and by reading various public available |
| * Atheros presentations and papers like these: |
| * |
| * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf |
| * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf |
| * |
| * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf |
| * |
| * This file also contains register values found on a memory dump of |
| * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal |
| * released by Atheros and on various debug messages found on the net. |
| */ |
| |
| #include "../reg.h" |
| |
| /*====MAC DMA REGISTERS====*/ |
| |
| /* |
| * AR5210-Specific TXDP registers |
| * 5210 has only 2 transmit queues so no DCU/QCU, just |
| * 2 transmit descriptor pointers... |
| */ |
| #define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */ |
| #define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */ |
| |
| /* |
| * Mac Control Register |
| */ |
| #define AR5K_CR 0x0008 /* Register Address */ |
| #define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */ |
| #define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */ |
| #define AR5K_CR_RXE 0x00000004 /* RX Enable */ |
| #define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */ |
| #define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */ |
| #define AR5K_CR_RXD 0x00000020 /* RX Disable */ |
| #define AR5K_CR_SWI 0x00000040 /* Software Interrupt */ |
| |
| /* |
| * RX Descriptor Pointer register |
| */ |
| #define AR5K_RXDP 0x000c |
| |
| /* |
| * Configuration and status register |
| */ |
| #define AR5K_CFG 0x0014 /* Register Address */ |
| #define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */ |
| #define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */ |
| #define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ |
| #define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ |
| #define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ |
| #define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ |
| #define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ |
| #define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ |
| #define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ |
| #define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */ |
| #define AR5K_CFG_TXCNT_S 11 |
| #define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */ |
| #define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */ |
| #define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */ |
| #define AR5K_CFG_PCI_THRES_S 17 |
| |
| /* |
| * Interrupt enable register |
| */ |
| #define AR5K_IER 0x0024 /* Register Address */ |
| #define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */ |
| #define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */ |
| |
| |
| /* |
| * 0x0028 is Beacon Control Register on 5210 |
| * and first RTS duration register on 5211 |
| */ |
| |
| /* |
| * Beacon control register [5210] |
| */ |
| #define AR5K_BCR 0x0028 /* Register Address */ |
| #define AR5K_BCR_AP 0x00000000 /* AP mode */ |
| #define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */ |
| #define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */ |
| #define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */ |
| #define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */ |
| #define AR5K_BCR_BCGET 0x00000010 |
| |
| /* |
| * First RTS duration register [5211] |
| */ |
| #define AR5K_RTSD0 0x0028 /* Register Address */ |
| #define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */ |
| #define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */ |
| #define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/ |
| #define AR5K_RTSD0_9_S 8 |
| #define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/ |
| #define AR5K_RTSD0_12_S 16 |
| #define AR5K_RTSD0_18 0xff000000 /* 16Mb*/ |
| #define AR5K_RTSD0_18_S 24 |
| |
| |
| /* |
| * 0x002c is Beacon Status Register on 5210 |
| * and second RTS duration register on 5211 |
| */ |
| |
| /* |
| * Beacon status register [5210] |
| * |
| * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR |
| * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning |
| * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). |
| * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i |
| * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what |
| * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. |
| */ |
| #define AR5K_BSR 0x002c /* Register Address */ |
| #define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */ |
| #define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */ |
| #define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */ |
| #define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */ |
| #define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */ |
| #define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */ |
| #define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */ |
| #define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */ |
| #define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */ |
| #define AR5K_BSR_SWBA_CNT 0x00ff0000 |
| |
| /* |
| * Second RTS duration register [5211] |
| */ |
| #define AR5K_RTSD1 0x002c /* Register Address */ |
| #define AR5K_RTSD1_24 0x000000ff /* 24Mb */ |
| #define AR5K_RTSD1_24_S 0 |
| #define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */ |
| #define AR5K_RTSD1_36_S 8 |
| #define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */ |
| #define AR5K_RTSD1_48_S 16 |
| #define AR5K_RTSD1_54 0xff000000 /* 54Mb */ |
| #define AR5K_RTSD1_54_S 24 |
| |
| |
| /* |
| * Transmit configuration register |
| */ |
| #define AR5K_TXCFG 0x0030 /* Register Address */ |
| #define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */ |
| #define AR5K_TXCFG_SDMAMR_S 0 |
| #define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ |
| #define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ |
| #define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ |
| #define AR5K_TXCFG_TXFULL_S 4 |
| #define AR5K_TXCFG_TXFULL_0B 0x00000000 |
| #define AR5K_TXCFG_TXFULL_64B 0x00000010 |
| #define AR5K_TXCFG_TXFULL_128B 0x00000020 |
| #define AR5K_TXCFG_TXFULL_192B 0x00000030 |
| #define AR5K_TXCFG_TXFULL_256B 0x00000040 |
| #define AR5K_TXCFG_TXCONT_EN 0x00000080 |
| #define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ |
| #define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */ |
| #define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */ |
| #define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */ |
| #define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ |
| #define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ |
| #define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */ |
| #define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */ |
| #define AR5K_TXCFG_DCU_DBL_BUF_DIS 0x00008000 /* Disable double buffering on DCU */ |
| #define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */ |
| |
| /* |
| * Receive configuration register |
| */ |
| #define AR5K_RXCFG 0x0034 /* Register Address */ |
| #define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */ |
| #define AR5K_RXCFG_SDMAMW_S 0 |
| #define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */ |
| #define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */ |
| #define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */ |
| #define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */ |
| #define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */ |
| |
| /* |
| * Receive jumbo descriptor last address register |
| * Only found in 5211 (?) |
| */ |
| #define AR5K_RXJLA 0x0038 |
| |
| /* |
| * MIB control register |
| */ |
| #define AR5K_MIBC 0x0040 /* Register Address */ |
| #define AR5K_MIBC_COW 0x00000001 /* Warn test indicator */ |
| #define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */ |
| #define AR5K_MIBC_CMC 0x00000004 /* Clean MIB Counters */ |
| #define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe */ |
| |
| /* |
| * Timeout prescale register |
| */ |
| #define AR5K_TOPS 0x0044 |
| #define AR5K_TOPS_M 0x0000ffff |
| |
| /* |
| * Receive timeout register (no frame received) |
| */ |
| #define AR5K_RXNOFRM 0x0048 |
| #define AR5K_RXNOFRM_M 0x000003ff |
| |
| /* |
| * Transmit timeout register (no frame sent) |
| */ |
| #define AR5K_TXNOFRM 0x004c |
| #define AR5K_TXNOFRM_M 0x000003ff |
| #define AR5K_TXNOFRM_QCU 0x000ffc00 |
| #define AR5K_TXNOFRM_QCU_S 10 |
| |
| /* |
| * Receive frame gap timeout register |
| */ |
| #define AR5K_RPGTO 0x0050 |
| #define AR5K_RPGTO_M 0x000003ff |
| |
| /* |
| * Receive frame count limit register |
| */ |
| #define AR5K_RFCNT 0x0054 |
| #define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */ |
| #define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */ |
| |
| /* |
| * Misc settings register |
| * (reserved0-3) |
| */ |
| #define AR5K_MISC 0x0058 /* Register Address */ |
| #define AR5K_MISC_DMA_OBS_M 0x000001e0 |
| #define AR5K_MISC_DMA_OBS_S 5 |
| #define AR5K_MISC_MISC_OBS_M 0x00000e00 |
| #define AR5K_MISC_MISC_OBS_S 9 |
| #define AR5K_MISC_MAC_OBS_LSB_M 0x00007000 |
| #define AR5K_MISC_MAC_OBS_LSB_S 12 |
| #define AR5K_MISC_MAC_OBS_MSB_M 0x00038000 |
| #define AR5K_MISC_MAC_OBS_MSB_S 15 |
| #define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */ |
| #define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */ |
| |
| /* |
| * QCU/DCU clock gating register (5311) |
| * (reserved4-5) |
| */ |
| #define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */ |
| #define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */ |
| #define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */ |
| |
| /* |
| * Interrupt Status Registers |
| * |
| * For 5210 there is only one status register but for |
| * 5211/5212 we have one primary and 4 secondary registers. |
| * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212. |
| * Most of these bits are common for all chipsets. |
| */ |
| #define AR5K_ISR 0x001c /* Register Address [5210] */ |
| #define AR5K_PISR 0x0080 /* Register Address [5211+] */ |
| #define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */ |
| #define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ |
| #define AR5K_ISR_RXERR 0x00000004 /* Receive error */ |
| #define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ |
| #define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ |
| #define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ |
| #define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */ |
| #define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ |
| #define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ |
| #define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */ |
| #define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ |
| #define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ |
| #define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ |
| #define AR5K_ISR_SWI 0x00002000 /* Software interrupt */ |
| #define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ |
| #define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ |
| #define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ |
| #define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ |
| #define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ |
| #define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ |
| #define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ |
| #define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ |
| #define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ |
| #define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ |
| #define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */ |
| #define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ |
| #define AR5K_ISR_TIM 0x00800000 /* [5211+] */ |
| #define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, |
| CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ |
| #define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ |
| #define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ |
| #define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ |
| #define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ |
| |
| /* |
| * Secondary status registers [5211+] (0 - 4) |
| * |
| * These give the status for each QCU, only QCUs 0-9 are |
| * represented. |
| */ |
| #define AR5K_SISR0 0x0084 /* Register Address [5211+] */ |
| #define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ |
| #define AR5K_SISR0_QCU_TXOK_S 0 |
| #define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ |
| #define AR5K_SISR0_QCU_TXDESC_S 16 |
| |
| #define AR5K_SISR1 0x0088 /* Register Address [5211+] */ |
| #define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ |
| #define AR5K_SISR1_QCU_TXERR_S 0 |
| #define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ |
| #define AR5K_SISR1_QCU_TXEOL_S 16 |
| |
| #define AR5K_SISR2 0x008c /* Register Address [5211+] */ |
| #define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ |
| #define AR5K_SISR2_QCU_TXURN_S 0 |
| #define AR5K_SISR2_MCABT 0x00010000 /* Master Cycle Abort */ |
| #define AR5K_SISR2_SSERR 0x00020000 /* Signaled System Error */ |
| #define AR5K_SISR2_DPERR 0x00040000 /* Bus parity error */ |
| #define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ |
| #define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ |
| #define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ |
| #define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ |
| #define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ |
| #define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ |
| #define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */ |
| |
| #define AR5K_SISR3 0x0090 /* Register Address [5211+] */ |
| #define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ |
| #define AR5K_SISR3_QCBRORN_S 0 |
| #define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ |
| #define AR5K_SISR3_QCBRURN_S 16 |
| |
| #define AR5K_SISR4 0x0094 /* Register Address [5211+] */ |
| #define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */ |
| #define AR5K_SISR4_QTRIG_S 0 |
| |
| /* |
| * Shadow read-and-clear interrupt status registers [5211+] |
| */ |
| #define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */ |
| #define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */ |
| #define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */ |
| #define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */ |
| #define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */ |
| #define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */ |
| |
| /* |
| * Interrupt Mask Registers |
| * |
| * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary |
| * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. |
| */ |
| #define AR5K_IMR 0x0020 /* Register Address [5210] */ |
| #define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ |
| #define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/ |
| #define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ |
| #define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ |
| #define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ |
| #define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ |
| #define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ |
| #define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/ |
| #define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ |
| #define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ |
| #define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/ |
| #define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ |
| #define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ |
| #define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ |
| #define AR5K_IMR_SWI 0x00002000 /* Software interrupt */ |
| #define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ |
| #define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ |
| #define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ |
| #define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ |
| #define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ |
| #define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ |
| #define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ |
| #define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ |
| #define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ |
| #define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ |
| #define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ |
| #define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ |
| #define AR5K_IMR_TIM 0x00800000 /* [5211+] */ |
| #define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, |
| CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ |
| #define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ |
| #define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */ |
| #define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */ |
| #define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ |
| |
| /* |
| * Secondary interrupt mask registers [5211+] (0 - 4) |
| */ |
| #define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */ |
| #define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ |
| #define AR5K_SIMR0_QCU_TXOK_S 0 |
| #define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ |
| #define AR5K_SIMR0_QCU_TXDESC_S 16 |
| |
| #define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */ |
| #define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ |
| #define AR5K_SIMR1_QCU_TXERR_S 0 |
| #define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ |
| #define AR5K_SIMR1_QCU_TXEOL_S 16 |
| |
| #define AR5K_SIMR2 0x00ac /* Register Address [5211+] */ |
| #define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ |
| #define AR5K_SIMR2_QCU_TXURN_S 0 |
| #define AR5K_SIMR2_MCABT 0x00010000 /* Master Cycle Abort */ |
| #define AR5K_SIMR2_SSERR 0x00020000 /* Signaled System Error */ |
| #define AR5K_SIMR2_DPERR 0x00040000 /* Bus parity error */ |
| #define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ |
| #define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ |
| #define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ |
| #define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ |
| #define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ |
| #define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ |
| #define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */ |
| |
| #define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ |
| #define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ |
| #define AR5K_SIMR3_QCBRORN_S 0 |
| #define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ |
| #define AR5K_SIMR3_QCBRURN_S 16 |
| |
| #define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */ |
| #define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */ |
| #define AR5K_SIMR4_QTRIG_S 0 |
| |
| /* |
| * DMA Debug registers 0-7 |
| * 0xe0 - 0xfc |
| */ |
| |
| /* |
| * Decompression mask registers [5212+] |
| */ |
| #define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */ |
| #define AR5K_DCM_DATA 0x0404 /*Decompression mask data */ |
| |
| /* |
| * Wake On Wireless pattern control register [5212+] |
| */ |
| #define AR5K_WOW_PCFG 0x0410 /* Register Address */ |
| #define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */ |
| #define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */ |
| #define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */ |
| #define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */ |
| #define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */ |
| #define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */ |
| #define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */ |
| #define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */ |
| #define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */ |
| |
| /* |
| * Wake On Wireless pattern index register (?) [5212+] |
| */ |
| #define AR5K_WOW_PAT_IDX 0x0414 |
| |
| /* |
| * Wake On Wireless pattern data register [5212+] |
| */ |
| #define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */ |
| #define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */ |
| #define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */ |
| #define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */ |
| #define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */ |
| #define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */ |
| #define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */ |
| |
| /* |
| * Decompression configuration registers [5212+] |
| */ |
| #define AR5K_DCCFG 0x0420 /* Register Address */ |
| #define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */ |
| #define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */ |
| #define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */ |
| #define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */ |
| |
| /* |
| * Compression configuration registers [5212+] |
| */ |
| #define AR5K_CCFG 0x0600 /* Register Address */ |
| #define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */ |
| #define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */ |
| |
| #define AR5K_CCFG_CCU 0x0604 /* Register Address */ |
| #define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */ |
| #define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */ |
| #define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */ |
| #define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */ |
| #define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */ |
| |
| /* |
| * Compression performance counter registers [5212+] |
| */ |
| #define AR5K_CPC0 0x0610 /* Compression performance counter 0 */ |
| #define AR5K_CPC1 0x0614 /* Compression performance counter 1*/ |
| #define AR5K_CPC2 0x0618 /* Compression performance counter 2 */ |
| #define AR5K_CPC3 0x061c /* Compression performance counter 3 */ |
| #define AR5K_CPCOVF 0x0620 /* Compression performance overflow */ |
| |
| |
| /* |
| * Queue control unit (QCU) registers [5211+] |
| * |
| * Card has 12 TX Queues but i see that only 0-9 are used (?) |
| * both in binary HAL (see ah.h) and ar5k. Each queue has it's own |
| * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate) |
| * configuration register (0x08c0 - 0x08ec), a ready time configuration |
| * register (0x0900 - 0x092c), a misc configuration register (0x09c0 - |
| * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some |
| * global registers, QCU transmit enable/disable and "one shot arm (?)" |
| * set/clear, which contain status for all queues (we shift by 1 for each |
| * queue). To access these registers easily we define some macros here |
| * that are used inside HAL. For more infos check out *_tx_queue functs. |
| */ |
| |
| /* |
| * Generic QCU Register access macros |
| */ |
| #define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r) |
| #define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q)) |
| #define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q)) |
| |
| /* |
| * QCU Transmit descriptor pointer registers |
| */ |
| #define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */ |
| #define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q) |
| |
| /* |
| * QCU Transmit enable register |
| */ |
| #define AR5K_QCU_TXE 0x0840 |
| #define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q) |
| #define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q) |
| |
| /* |
| * QCU Transmit disable register |
| */ |
| #define AR5K_QCU_TXD 0x0880 |
| #define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q) |
| #define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q) |
| |
| /* |
| * QCU Constant Bit Rate configuration registers |
| */ |
| #define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */ |
| #define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */ |
| #define AR5K_QCU_CBRCFG_INTVAL_S 0 |
| #define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */ |
| #define AR5K_QCU_CBRCFG_ORN_THRES_S 24 |
| #define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q) |
| |
| /* |
| * QCU Ready time configuration registers |
| */ |
| #define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */ |
| #define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */ |
| #define AR5K_QCU_RDYTIMECFG_INTVAL_S 0 |
| #define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */ |
| #define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q) |
| |
| /* |
| * QCU one shot arm set registers |
| */ |
| #define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */ |
| #define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff |
| |
| /* |
| * QCU one shot arm clear registers |
| */ |
| #define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */ |
| #define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff |
| |
| /* |
| * QCU misc registers |
| */ |
| #define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ |
| #define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ |
| #define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ |
| #define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ |
| #define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ |
| #define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */ |
| #define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */ |
| #define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ |
| #define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */ |
| #define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */ |
| #define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ |
| #define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */ |
| #define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */ |
| #define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ |
| #define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ |
| #define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ |
| #define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q) |
| |
| |
| /* |
| * QCU status registers |
| */ |
| #define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */ |
| #define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */ |
| #define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */ |
| #define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q) |
| |
| /* |
| * QCU ready time shutdown register |
| */ |
| #define AR5K_QCU_RDYTIMESHDN 0x0a40 |
| #define AR5K_QCU_RDYTIMESHDN_M 0x000003ff |
| |
| /* |
| * QCU compression buffer base registers [5212+] |
| */ |
| #define AR5K_QCU_CBB_SELECT 0x0b00 |
| #define AR5K_QCU_CBB_ADDR 0x0b04 |
| #define AR5K_QCU_CBB_ADDR_S 9 |
| |
| /* |
| * QCU compression buffer configuration register [5212+] |
| * (buffer size) |
| */ |
| #define AR5K_QCU_CBCFG 0x0b08 |
| |
| |
| |
| /* |
| * Distributed Coordination Function (DCF) control unit (DCU) |
| * registers [5211+] |
| * |
| * These registers control the various characteristics of each queue |
| * for 802.11e (WME) combatibility so they go together with |
| * QCU registers in pairs. For each queue we have a QCU mask register, |
| * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), |
| * a retry limit register (0x1080 - 0x10ac), a channel time register |
| * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and |
| * a sequence number register (0x1140 - 0x116c). It seems that "global" |
| * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). |
| * We use the same macros here for easier register access. |
| * |
| */ |
| |
| /* |
| * DCU QCU mask registers |
| */ |
| #define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */ |
| #define AR5K_DCU_QCUMASK_M 0x000003ff |
| #define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q) |
| |
| /* |
| * DCU local Inter Frame Space settings register |
| */ |
| #define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */ |
| #define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */ |
| #define AR5K_DCU_LCL_IFS_CW_MIN_S 0 |
| #define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */ |
| #define AR5K_DCU_LCL_IFS_CW_MAX_S 10 |
| #define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */ |
| #define AR5K_DCU_LCL_IFS_AIFS_S 20 |
| #define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */ |
| #define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q) |
| |
| /* |
| * DCU retry limit registers |
| */ |
| #define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */ |
| #define AR5K_DCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ |
| #define AR5K_DCU_RETRY_LMT_SH_RETRY_S 0 |
| #define AR5K_DCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry limit mask */ |
| #define AR5K_DCU_RETRY_LMT_LG_RETRY_S 4 |
| #define AR5K_DCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask (?) */ |
| #define AR5K_DCU_RETRY_LMT_SSH_RETRY_S 8 |
| #define AR5K_DCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask (?) */ |
| #define AR5K_DCU_RETRY_LMT_SLG_RETRY_S 14 |
| #define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q) |
| |
| /* |
| * DCU channel time registers |
| */ |
| #define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */ |
| #define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */ |
| #define AR5K_DCU_CHAN_TIME_DUR_S 0 |
| #define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */ |
| #define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q) |
| |
| /* |
| * DCU misc registers [5211+] |
| * |
| * Note: Arbiter lockout control controls the |
| * behaviour on low priority queues when we have multiple queues |
| * with pending frames. Intra-frame lockout means we wait until |
| * the queue's current frame transmits (with post frame backoff and bursting) |
| * before we transmit anything else and global lockout means we |
| * wait for the whole queue to finish before higher priority queues |
| * can transmit (this is used on beacon and CAB queues). |
| * No lockout means there is no special handling. |
| */ |
| #define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ |
| #define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */ |
| #define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series |
| station RTS/data failure count |
| reset policy (?) */ |
| #define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series |
| CW reset policy */ |
| #define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */ |
| #define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ |
| #define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ |
| #define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ |
| #define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ |
| #define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ |
| #define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 |
| #define AR5K_DCU_MISC_VIRTCOL_IGNORE 1 |
| #define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ |
| #define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ |
| #define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 |
| #define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ |
| #define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */ |
| #define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */ |
| #define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */ |
| #define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */ |
| #define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */ |
| #define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */ |
| #define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */ |
| #define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */ |
| #define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q) |
| |
| /* |
| * DCU frame sequence number registers |
| */ |
| #define AR5K_DCU_SEQNUM_BASE 0x1140 |
| #define AR5K_DCU_SEQNUM_M 0x00000fff |
| #define AR5K_QUEUE_DCU_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) |
| |
| /* |
| * DCU global IFS SIFS register |
| */ |
| #define AR5K_DCU_GBL_IFS_SIFS 0x1030 |
| #define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff |
| |
| /* |
| * DCU global IFS slot interval register |
| */ |
| #define AR5K_DCU_GBL_IFS_SLOT 0x1070 |
| #define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff |
| |
| /* |
| * DCU global IFS EIFS register |
| */ |
| #define AR5K_DCU_GBL_IFS_EIFS 0x10b0 |
| #define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff |
| |
| /* |
| * DCU global IFS misc register |
| * |
| * LFSR stands for Linear Feedback Shift Register |
| * and it's used for generating pseudo-random |
| * number sequences. |
| * |
| * (If i understand corectly, random numbers are |
| * used for idle sensing -multiplied with cwmin/max etc-) |
| */ |
| #define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ |
| #define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */ |
| #define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ |
| #define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ |
| #define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ |
| #define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10 |
| #define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ |
| #define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */ |
| #define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ |
| #define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ |
| |
| /* |
| * DCU frame prefetch control register |
| */ |
| #define AR5K_DCU_FP 0x1230 /* Register Address */ |
| #define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */ |
| #define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */ |
| #define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */ |
| |
| /* |
| * DCU transmit pause control/status register |
| */ |
| #define AR5K_DCU_TXP 0x1270 /* Register Address */ |
| #define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */ |
| #define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */ |
| |
| /* |
| * DCU transmit filter table 0 (32 entries) |
| * each entry contains a 32bit slice of the |
| * 128bit tx filter for each DCU (4 slices per DCU) |
| */ |
| #define AR5K_DCU_TX_FILTER_0_BASE 0x1038 |
| #define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64)) |
| |
| /* |
| * DCU transmit filter table 1 (16 entries) |
| */ |
| #define AR5K_DCU_TX_FILTER_1_BASE 0x103c |
| #define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64)) |
| |
| /* |
| * DCU clear transmit filter register |
| */ |
| #define AR5K_DCU_TX_FILTER_CLR 0x143c |
| |
| /* |
| * DCU set transmit filter register |
| */ |
| #define AR5K_DCU_TX_FILTER_SET 0x147c |
| |
| /* |
| * Reset control register |
| */ |
| #define AR5K_RESET_CTL 0x4000 /* Register Address */ |
| #define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */ |
| #define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */ |
| #define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */ |
| #define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */ |
| #define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */ |
| #define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */ |
| |
| /* |
| * Sleep control register |
| */ |
| #define AR5K_SLEEP_CTL 0x4004 /* Register Address */ |
| #define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */ |
| #define AR5K_SLEEP_CTL_SLDUR_S 0 |
| #define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */ |
| #define AR5K_SLEEP_CTL_SLE_S 16 |
| #define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */ |
| #define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ |
| #define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */ |
| #define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ |
| #define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */ |
| #define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */ |
| #define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */ |
| |
| /* |
| * Interrupt pending register |
| */ |
| #define AR5K_INTPEND 0x4008 |
| #define AR5K_INTPEND_M 0x00000001 |
| |
| /* |
| * Sleep force register |
| */ |
| #define AR5K_SFR 0x400c |
| #define AR5K_SFR_EN 0x00000001 |
| |
| /* |
| * PCI configuration register |
| * TODO: Fix LED stuff |
| */ |
| #define AR5K_PCICFG 0x4010 /* Register Address */ |
| #define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ |
| #define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */ |
| #define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ |
| #define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ |
| #define AR5K_PCICFG_EESIZE_S 3 |
| #define AR5K_PCICFG_EESIZE_4K 0 /* 4K */ |
| #define AR5K_PCICFG_EESIZE_8K 1 /* 8K */ |
| #define AR5K_PCICFG_EESIZE_16K 2 /* 16K */ |
| #define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */ |
| #define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */ |
| #define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */ |
| #define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */ |
| #define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */ |
| #define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */ |
| #define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */ |
| #define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ |
| #define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ |
| #define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ |
| #define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/ |
| #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ |
| #define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ |
| #define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ |
| #define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */ |
| #define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */ |
| #define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */ |
| #define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */ |
| #define AR5K_PCICFG_LEDBLINK_S 20 |
| #define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */ |
| #define AR5K_PCICFG_LEDSTATE \ |
| (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ |
| AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) |
| #define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */ |
| #define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24 |
| |
| /* |
| * "General Purpose Input/Output" (GPIO) control register |
| * |
| * I'm not sure about this but after looking at the code |
| * for all chipsets here is what i got. |
| * |
| * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits) |
| * Mode 0 -> always input |
| * Mode 1 -> output when GPIODO for this GPIO is set to 0 |
| * Mode 2 -> output when GPIODO for this GPIO is set to 1 |
| * Mode 3 -> always output |
| * |
| * For more infos check out get_gpio/set_gpio and |
| * set_gpio_input/set_gpio_output functs. |
| * For more infos on gpio interrupt check out set_gpio_intr. |
| */ |
| #define AR5K_NUM_GPIO 6 |
| |
| #define AR5K_GPIOCR 0x4014 /* Register Address */ |
| #define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ |
| #define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */ |
| #define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */ |
| #define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */ |
| #define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */ |
| #define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */ |
| #define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */ |
| #define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */ |
| |
| /* |
| * "General Purpose Input/Output" (GPIO) data output register |
| */ |
| #define AR5K_GPIODO 0x4018 |
| |
| /* |
| * "General Purpose Input/Output" (GPIO) data input register |
| */ |
| #define AR5K_GPIODI 0x401c |
| #define AR5K_GPIODI_M 0x0000002f |
| |
| /* |
| * Silicon revision register |
| */ |
| #define AR5K_SREV 0x4020 /* Register Address */ |
| #define AR5K_SREV_REV 0x0000000f /* Mask for revision */ |
| #define AR5K_SREV_REV_S 0 |
| #define AR5K_SREV_VER 0x000000ff /* Mask for version */ |
| #define AR5K_SREV_VER_S 4 |
| |
| /* |
| * TXE write posting register |
| */ |
| #define AR5K_TXEPOST 0x4028 |
| |
| /* |
| * QCU sleep mask |
| */ |
| #define AR5K_QCU_SLEEP_MASK 0x402c |
| |
| /* 0x4068 is compression buffer configuration |
| * register on 5414 and pm configuration register |
| * on 5424 and newer pci-e chips. */ |
| |
| /* |
| * Compression buffer configuration |
| * register (enable/disable) [5414] |
| */ |
| #define AR5K_5414_CBCFG 0x4068 |
| #define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */ |
| |
| /* |
| * PCI-E Power management configuration |
| * and status register [5424+] |
| */ |
| #define AR5K_PCIE_PM_CTL 0x4068 /* Register address */ |
| /* Only 5424 */ |
| #define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1 |
| when d2_sleep_en is asserted */ |
| #define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */ |
| #define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */ |
| #define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes |
| down */ |
| /* Wake On Wireless */ |
| #define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */ |
| #define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */ |
| #define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */ |
| #define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080 |
| #define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100 |
| #define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200 |
| #define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400 |
| |
| /* |
| * PCI-E Workaround enable register |
| */ |
| #define AR5K_PCIE_WAEN 0x407c |
| |
| /* |
| * PCI-E Serializer/Desirializer |
| * registers |
| */ |
| #define AR5K_PCIE_SERDES 0x4080 |
| #define AR5K_PCIE_SERDES_RESET 0x4084 |
| |
| /*====EEPROM REGISTERS====*/ |
| |
| /* |
| * EEPROM access registers |
| * |
| * Here we got a difference between 5210/5211-12 |
| * read data register for 5210 is at 0x6800 and |
| * status register is at 0x6c00. There is also |
| * no eeprom command register on 5210 and the |
| * offsets are different. |
| * |
| * To read eeprom data for a specific offset: |
| * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) |
| * read AR5K_EEPROM_BASE +(4 * offset) |
| * check the eeprom status register |
| * and read eeprom data register. |
| * |
| * 5211 - write offset to AR5K_EEPROM_BASE |
| * 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD |
| * check the eeprom status register |
| * and read eeprom data register. |
| * |
| * To write eeprom data for a specific offset: |
| * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) |
| * write data to AR5K_EEPROM_BASE +(4 * offset) |
| * check the eeprom status register |
| * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD |
| * 5212 write offset to AR5K_EEPROM_BASE |
| * write data to data register |
| * write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD |
| * check the eeprom status register |
| * |
| * For more infos check eeprom_* functs and the ar5k.c |
| * file posted in madwifi-devel mailing list. |
| * http://sourceforge.net/mailarchive/message.php?msg_id=8966525 |
| * |
| */ |
| #define AR5K_EEPROM_BASE 0x6000 |
| |
| /* |
| * EEPROM data register |
| */ |
| #define AR5K_EEPROM_DATA_5211 0x6004 |
| #define AR5K_EEPROM_DATA_5210 0x6800 |
| #define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211) |
| |
| /* |
| * EEPROM command register |
| */ |
| #define AR5K_EEPROM_CMD 0x6008 /* Register Addres */ |
| #define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */ |
| #define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */ |
| #define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */ |
| |
| /* |
| * EEPROM status register |
| */ |
| #define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */ |
| #define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */ |
| #define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211) |
| #define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */ |
| #define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */ |
| #define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */ |
| #define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */ |
| |
| /* |
| * EEPROM config register |
| */ |
| #define AR5K_EEPROM_CFG 0x6010 /* Register Addres */ |
| #define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ |
| #define AR5K_EEPROM_CFG_SIZE_AUTO 0 |
| #define AR5K_EEPROM_CFG_SIZE_4KBIT 1 |
| #define AR5K_EEPROM_CFG_SIZE_8KBIT 2 |
| #define AR5K_EEPROM_CFG_SIZE_16KBIT 3 |
| #define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ |
| #define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ |
| #define AR5K_EEPROM_CFG_CLK_RATE_S 3 |
| #define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0 |
| #define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1 |
| #define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2 |
| #define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */ |
| #define AR5K_EEPROM_CFG_PROT_KEY_S 8 |
| #define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ |
| |
| |
| /* |
| * TODO: Wake On Wireless registers |
| * Range 0x7000 - 0x7ce0 |
| */ |
| |
| /* |
| * Protocol Control Unit (PCU) registers |
| */ |
| /* |
| * Used for checking initial register writes |
| * during channel reset (see reset func) |
| */ |
| #define AR5K_PCU_MIN 0x8000 |
| #define AR5K_PCU_MAX 0x8fff |
| |
| /* |
| * First station id register (Lower 32 bits of MAC address) |
| */ |
| #define AR5K_STA_ID0 0x8000 |
| #define AR5K_STA_ID0_ARRD_L32 0xffffffff |
| |
| /* |
| * Second station id register (Upper 16 bits of MAC address + PCU settings) |
| */ |
| #define AR5K_STA_ID1 0x8004 /* Register Address */ |
| #define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */ |
| #define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ |
| #define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ |
| #define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ |
| #define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */ |
| #define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */ |
| #define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */ |
| #define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/ |
| #define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211) |
| #define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ |
| #define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ |
| #define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ |
| #define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */ |
| #define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */ |
| #define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */ |
| #define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ |
| #define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */ |
| #define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ |
| #define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */ |
| #define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */ |
| |
| #define AR5K_STA_ID1_ANTENNA_SETTINGS (AR5K_STA_ID1_DEFAULT_ANTENNA | \ |
| AR5K_STA_ID1_DESC_ANTENNA | \ |
| AR5K_STA_ID1_RTS_DEF_ANTENNA | \ |
| AR5K_STA_ID1_SELFGEN_DEF_ANT) |
| |
| /* |
| * First BSSID register (MAC address, lower 32bits) |
| */ |
| #define AR5K_BSS_ID0 0x8008 |
| |
| /* |
| * Second BSSID register (MAC address in upper 16 bits) |
| * |
| * AID: Association ID |
| */ |
| #define AR5K_BSS_ID1 0x800c |
| #define AR5K_BSS_ID1_AID 0xffff0000 |
| #define AR5K_BSS_ID1_AID_S 16 |
| |
| /* |
| * Backoff slot time register |
| */ |
| #define AR5K_SLOT_TIME 0x8010 |
| |
| /* |
| * ACK/CTS timeout register |
| */ |
| #define AR5K_TIME_OUT 0x8014 /* Register Address */ |
| #define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */ |
| #define AR5K_TIME_OUT_ACK_S 0 |
| #define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */ |
| #define AR5K_TIME_OUT_CTS_S 16 |
| |
| /* |
| * RSSI threshold register |
| */ |
| #define AR5K_RSSI_THR 0x8018 /* Register Address */ |
| #define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */ |
| #define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */ |
| #define AR5K_RSSI_THR_BMISS_5210_S 8 |
| #define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */ |
| #define AR5K_RSSI_THR_BMISS_5211_S 8 |
| #define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211) |
| #define AR5K_RSSI_THR_BMISS_S 8 |
| |
| /* |
| * 5210 has more PCU registers because there is no QCU/DCU |
| * so queue parameters are set here, this way a lot common |
| * registers have different address for 5210. To make things |
| * easier we define a macro based on ah->ah_version for common |
| * registers with different addresses and common flags. |
| */ |
| |
| /* |
| * Retry limit register |
| * |
| * Retry limit register for 5210 (no QCU/DCU so it's done in PCU) |
| */ |
| #define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */ |
| #define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ |
| #define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0 |
| #define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */ |
| #define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4 |
| #define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */ |
| #define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8 |
| #define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */ |
| #define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14 |
| #define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */ |
| #define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20 |
| |
| /* |
| * Transmit latency register |
| */ |
| #define AR5K_USEC_5210 0x8020 /* Register Address [5210] */ |
| #define AR5K_USEC_5211 0x801c /* Register Address [5211+] */ |
| #define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_USEC_5210 : AR5K_USEC_5211) |
| #define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ |
| #define AR5K_USEC_1_S 0 |
| #define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */ |
| #define AR5K_USEC_32_S 7 |
| #define AR5K_USEC_TX_LATENCY_5211 0x007fc000 |
| #define AR5K_USEC_TX_LATENCY_5211_S 14 |
| #define AR5K_USEC_RX_LATENCY_5211 0x1f800000 |
| #define AR5K_USEC_RX_LATENCY_5211_S 23 |
| #define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */ |
| #define AR5K_USEC_TX_LATENCY_5210_S 14 |
| #define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */ |
| #define AR5K_USEC_RX_LATENCY_5210_S 20 |
| |
| /* |
| * PCU beacon control register |
| */ |
| #define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */ |
| #define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */ |
| #define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_BEACON_5210 : AR5K_BEACON_5211) |
| #define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */ |
| #define AR5K_BEACON_PERIOD_S 0 |
| #define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */ |
| #define AR5K_BEACON_TIM_S 16 |
| #define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */ |
| #define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */ |
| |
| /* |
| * CFP period register |
| */ |
| #define AR5K_CFP_PERIOD_5210 0x8028 |
| #define AR5K_CFP_PERIOD_5211 0x8024 |
| #define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211) |
| |
| /* |
| * Next beacon time register |
| */ |
| #define AR5K_TIMER0_5210 0x802c |
| #define AR5K_TIMER0_5211 0x8028 |
| #define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_TIMER0_5210 : AR5K_TIMER0_5211) |
| |
| /* |
| * Next DMA beacon alert register |
| */ |
| #define AR5K_TIMER1_5210 0x8030 |
| #define AR5K_TIMER1_5211 0x802c |
| #define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_TIMER1_5210 : AR5K_TIMER1_5211) |
| |
| /* |
| * Next software beacon alert register |
| */ |
| #define AR5K_TIMER2_5210 0x8034 |
| #define AR5K_TIMER2_5211 0x8030 |
| #define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_TIMER2_5210 : AR5K_TIMER2_5211) |
| |
| /* |
| * Next ATIM window time register |
| */ |
| #define AR5K_TIMER3_5210 0x8038 |
| #define AR5K_TIMER3_5211 0x8034 |
| #define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_TIMER3_5210 : AR5K_TIMER3_5211) |
| |
| |
| /* |
| * 5210 First inter frame spacing register (IFS) |
| */ |
| #define AR5K_IFS0 0x8040 |
| #define AR5K_IFS0_SIFS 0x000007ff |
| #define AR5K_IFS0_SIFS_S 0 |
| #define AR5K_IFS0_DIFS 0x007ff800 |
| #define AR5K_IFS0_DIFS_S 11 |
| |
| /* |
| * 5210 Second inter frame spacing register (IFS) |
| */ |
| #define AR5K_IFS1 0x8044 |
| #define AR5K_IFS1_PIFS 0x00000fff |
| #define AR5K_IFS1_PIFS_S 0 |
| #define AR5K_IFS1_EIFS 0x03fff000 |
| #define AR5K_IFS1_EIFS_S 12 |
| #define AR5K_IFS1_CS_EN 0x04000000 |
| |
| |
| /* |
| * CFP duration register |
| */ |
| #define AR5K_CFP_DUR_5210 0x8048 |
| #define AR5K_CFP_DUR_5211 0x8038 |
| #define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211) |
| |
| /* |
| * Receive filter register |
| */ |
| #define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */ |
| #define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ |
| #define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211) |
| #define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ |
| #define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ |
| #define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ |
| #define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ |
| #define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ |
| #define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ |
| #define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ |
| #define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */ |
| #define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */ |
| #define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ |
| #define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */ |
| #define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */ |
| #define AR5K_RX_FILTER_PHYERR \ |
| ((ah->ah_version == AR5K_AR5211 ? \ |
| AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212)) |
| #define AR5K_RX_FILTER_RADARERR \ |
| ((ah->ah_version == AR5K_AR5211 ? \ |
| AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212)) |
| |
| /* |
| * Multicast filter register (lower 32 bits) |
| */ |
| #define AR5K_MCAST_FILTER0_5210 0x8050 |
| #define AR5K_MCAST_FILTER0_5211 0x8040 |
| #define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211) |
| |
| /* |
| * Multicast filter register (higher 16 bits) |
| */ |
| #define AR5K_MCAST_FILTER1_5210 0x8054 |
| #define AR5K_MCAST_FILTER1_5211 0x8044 |
| #define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211) |
| |
| |
| /* |
| * Transmit mask register (lower 32 bits) [5210] |
| */ |
| #define AR5K_TX_MASK0 0x8058 |
| |
| /* |
| * Transmit mask register (higher 16 bits) [5210] |
| */ |
| #define AR5K_TX_MASK1 0x805c |
| |
| /* |
| * Clear transmit mask [5210] |
| */ |
| #define AR5K_CLR_TMASK 0x8060 |
| |
| /* |
| * Trigger level register (before transmission) [5210] |
| */ |
| #define AR5K_TRIG_LVL 0x8064 |
| |
| |
| /* |
| * PCU control register |
| * |
| * Only DIS_RX is used in the code, the rest i guess are |
| * for tweaking/diagnostics. |
| */ |
| #define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */ |
| #define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ |
| #define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211) |
| #define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */ |
| #define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */ |
| #define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */ |
| #define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption */ |
| #define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption */ |
| #define AR5K_DIAG_SW_DIS_TX 0x00000020 /* Disable transmit [5210] */ |
| #define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable recieve */ |
| #define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 |
| #define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211) |
| #define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* Loopback (i guess it goes with DIS_TX) [5210] */ |
| #define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 |
| #define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) |
| #define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */ |
| #define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 |
| #define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) |
| #define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */ |
| #define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 |
| #define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) |
| #define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */ |
| #define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 |
| #define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) |
| #define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ |
| #define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ |
| #define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */ |
| #define AR5K_DIAG_SW_SCRAM_SEED_S 10 |
| #define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */ |
| #define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 |
| #define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */ |
| #define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) |
| #define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */ |
| #define AR5K_DIAG_SW_OBSPT_S 18 |
| #define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */ |
| #define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */ |
| #define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */ |
| #define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */ |
| |
| /* |
| * TSF (clock) register (lower 32 bits) |
| */ |
| #define AR5K_TSF_L32_5210 0x806c |
| #define AR5K_TSF_L32_5211 0x804c |
| #define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211) |
| |
| /* |
| * TSF (clock) register (higher 32 bits) |
| */ |
| #define AR5K_TSF_U32_5210 0x8070 |
| #define AR5K_TSF_U32_5211 0x8050 |
| #define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211) |
| |
| /* |
| * Last beacon timestamp register (Read Only) |
| */ |
| #define AR5K_LAST_TSTP 0x8080 |
| |
| /* |
| * ADDAC test register [5211+] |
| */ |
| #define AR5K_ADDAC_TEST 0x8054 /* Register Address */ |
| #define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ |
| #define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ |
| #define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ |
| #define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ |
| #define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */ |
| #define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */ |
| #define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */ |
| #define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */ |
| #define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */ |
| #define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */ |
| #define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* ARM rx buffer for capture */ |
| |
| /* |
| * Default antenna register [5211+] |
| */ |
| #define AR5K_DEFAULT_ANTENNA 0x8058 |
| |
| /* |
| * Frame control QoS mask register (?) [5211+] |
| * (FC_QOS_MASK) |
| */ |
| #define AR5K_FRAME_CTL_QOSM 0x805c |
| |
| /* |
| * Seq mask register (?) [5211+] |
| */ |
| #define AR5K_SEQ_MASK 0x8060 |
| |
| /* |
| * Retry count register [5210] |
| */ |
| #define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */ |
| #define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */ |
| #define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */ |
| |
| /* |
| * Back-off status register [5210] |
| */ |
| #define AR5K_BACKOFF 0x8088 /* Register Address [5210] */ |
| #define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */ |
| #define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */ |
| |
| |
| |
| /* |
| * NAV register (current) |
| */ |
| #define AR5K_NAV_5210 0x808c |
| #define AR5K_NAV_5211 0x8084 |
| #define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_NAV_5210 : AR5K_NAV_5211) |
| |
| /* |
| * RTS success register |
| */ |
| #define AR5K_RTS_OK_5210 0x8090 |
| #define AR5K_RTS_OK_5211 0x8088 |
| #define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211) |
| |
| /* |
| * RTS failure register |
| */ |
| #define AR5K_RTS_FAIL_5210 0x8094 |
| #define AR5K_RTS_FAIL_5211 0x808c |
| #define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211) |
| |
| /* |
| * ACK failure register |
| */ |
| #define AR5K_ACK_FAIL_5210 0x8098 |
| #define AR5K_ACK_FAIL_5211 0x8090 |
| #define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211) |
| |
| /* |
| * FCS failure register |
| */ |
| #define AR5K_FCS_FAIL_5210 0x809c |
| #define AR5K_FCS_FAIL_5211 0x8094 |
| #define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211) |
| |
| /* |
| * Beacon count register |
| */ |
| #define AR5K_BEACON_CNT_5210 0x80a0 |
| #define AR5K_BEACON_CNT_5211 0x8098 |
| #define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211) |
| |
| |
| /*===5212 Specific PCU registers===*/ |
| |
| /* |
| * Transmit power control register |
| */ |
| #define AR5K_TPC 0x80e8 |
| #define AR5K_TPC_ACK 0x0000003f /* ack frames */ |
| #define AR5K_TPC_ACK_S 0 |
| #define AR5K_TPC_CTS 0x00003f00 /* cts frames */ |
| #define AR5K_TPC_CTS_S 8 |
| #define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */ |
| #define AR5K_TPC_CHIRP_S 16 |
| #define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */ |
| #define AR5K_TPC_DOPPLER_S 24 |
| |
| /* |
| * XR (eXtended Range) mode register |
| */ |
| #define AR5K_XRMODE 0x80c0 /* Register Address */ |
| #define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */ |
| #define AR5K_XRMODE_POLL_TYPE_S 0 |
| #define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */ |
| #define AR5K_XRMODE_POLL_SUBTYPE_S 2 |
| #define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */ |
| #define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */ |
| #define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */ |
| #define AR5K_XRMODE_FRAME_HOLD_S 20 |
| |
| /* |
| * XR delay register |
| */ |
| #define AR5K_XRDELAY 0x80c4 /* Register Address */ |
| #define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */ |
| #define AR5K_XRDELAY_SLOT_DELAY_S 0 |
| #define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */ |
| #define AR5K_XRDELAY_CHIRP_DELAY_S 16 |
| |
| /* |
| * XR timeout register |
| */ |
| #define AR5K_XRTIMEOUT 0x80c8 /* Register Address */ |
| #define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */ |
| #define AR5K_XRTIMEOUT_CHIRP_S 0 |
| #define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */ |
| #define AR5K_XRTIMEOUT_POLL_S 16 |
| |
| /* |
| * XR chirp register |
| */ |
| #define AR5K_XRCHIRP 0x80cc /* Register Address */ |
| #define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */ |
| #define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */ |
| |
| /* |
| * XR stomp register |
| */ |
| #define AR5K_XRSTOMP 0x80d0 /* Register Address */ |
| #define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */ |
| #define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */ |
| #define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */ |
| #define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */ |
| #define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/ |
| #define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */ |
| |
| /* |
| * First enhanced sleep register |
| */ |
| #define AR5K_SLEEP0 0x80d4 /* Register Address */ |
| #define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ |
| #define AR5K_SLEEP0_NEXT_DTIM_S 0 |
| #define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ |
| #define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */ |
| #define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ |
| #define AR5K_SLEEP0_CABTO_S 24 |
| |
| /* |
| * Second enhanced sleep register |
| */ |
| #define AR5K_SLEEP1 0x80d8 /* Register Address */ |
| #define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */ |
| #define AR5K_SLEEP1_NEXT_TIM_S 0 |
| #define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */ |
| #define AR5K_SLEEP1_BEACON_TO_S 24 |
| |
| /* |
| * Third enhanced sleep register |
| */ |
| #define AR5K_SLEEP2 0x80dc /* Register Address */ |
| #define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */ |
| #define AR5K_SLEEP2_TIM_PER_S 0 |
| #define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */ |
| #define AR5K_SLEEP2_DTIM_PER_S 16 |
| |
| /* |
| * TX power control (TPC) register |
| * |
| * XXX: PCDAC steps (0.5dbm) or DBM ? |
| * |
| */ |
| #define AR5K_TXPC 0x80e8 /* Register Address */ |
| #define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */ |
| #define AR5K_TXPC_ACK_S 0 |
| #define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */ |
| #define AR5K_TXPC_CTS_S 8 |
| #define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */ |
| #define AR5K_TXPC_CHIRP_S 16 |
| #define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */ |
| #define AR5K_TXPC_DOPPLER_S 24 |
| |
| /* |
| * Profile count registers |
| */ |
| #define AR5K_PROFCNT_TX 0x80ec /* Tx count */ |
| #define AR5K_PROFCNT_RX 0x80f0 /* Rx count */ |
| #define AR5K_PROFCNT_RXCLR 0x80f4 /* Clear Rx count */ |
| #define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */ |
| |
| /* |
| * Quiet period control registers |
| */ |
| #define AR5K_QUIET_CTL1 0x80fc /* Register Address */ |
| #define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */ |
| #define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0 |
| #define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */ |
| #define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */ |
| |
| #define AR5K_QUIET_CTL2 0x8100 /* Register Address */ |
| #define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */ |
| #define AR5K_QUIET_CTL2_QT_PER_S 0 |
| #define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */ |
| #define AR5K_QUIET_CTL2_QT_DUR_S 16 |
| |
| /* |
| * TSF parameter register |
| */ |
| #define AR5K_TSF_PARM 0x8104 /* Register Address */ |
| #define AR5K_TSF_PARM_INC 0x000000ff /* Mask for TSF increment */ |
| #define AR5K_TSF_PARM_INC_S 0 |
| |
| /* |
| * QoS NOACK policy |
| */ |
| #define AR5K_QOS_NOACK 0x8108 /* Register Address */ |
| #define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */ |
| #define AR5K_QOS_NOACK_2BIT_VALUES_S 0 |
| #define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */ |
| #define AR5K_QOS_NOACK_BIT_OFFSET_S 4 |
| #define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */ |
| #define AR5K_QOS_NOACK_BYTE_OFFSET_S 7 |
| |
| /* |
| * PHY error filter register |
| */ |
| #define AR5K_PHY_ERR_FIL 0x810c |
| #define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */ |
| #define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */ |
| #define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */ |
| |
| /* |
| * XR latency register |
| */ |
| #define AR5K_XRLAT_TX 0x8110 |
| |
| /* |
| * ACK SIFS register |
| */ |
| #define AR5K_ACKSIFS 0x8114 /* Register Address */ |
| #define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */ |
| |
| /* |
| * MIC QoS control register (?) |
| */ |
| #define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ |
| #define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2)) |
| #define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ |
| |
| /* |
| * MIC QoS select register (?) |
| */ |
| #define AR5K_MIC_QOS_SEL 0x811c |
| #define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4)) |
| |
| /* |
| * Misc mode control register (?) |
| */ |
| #define AR5K_MISC_MODE 0x8120 /* Register Address */ |
| #define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */ |
| #define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */ |
| #define AR5K_MISC_MODE_COMBINED_MIC 0x00000004 /* use rx/tx MIC key */ |
| /* more bits */ |
| |
| /* |
| * OFDM Filter counter |
| */ |
| #define AR5K_OFDM_FIL_CNT 0x8124 |
| |
| /* |
| * CCK Filter counter |
| */ |
| #define AR5K_CCK_FIL_CNT 0x8128 |
| |
| /* |
| * PHY Error Counters (?) |
| */ |
| #define AR5K_PHYERR_CNT1 0x812c |
| #define AR5K_PHYERR_CNT1_MASK 0x8130 |
| |
| #define AR5K_PHYERR_CNT2 0x8134 |
| #define AR5K_PHYERR_CNT2_MASK 0x8138 |
| |
| /* |
| * TSF Threshold register (?) |
| */ |
| #define AR5K_TSF_THRES 0x813c |
| |
| /* |
| * TODO: Wake On Wireless registers |
| * Range: 0x8147 - 0x818c |
| */ |
| |
| /* |
| * Rate -> ACK SIFS mapping table (32 entries) |
| */ |
| #define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */ |
| #define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2)) |
| #define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */ |
| #define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */ |
| |
| /* |
| * Rate -> duration mapping table (32 entries) |
| */ |
| #define AR5K_RATE_DUR_BASE 0x8700 |
| #define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2)) |
| |
| /* |
| * Rate -> db mapping table |
| * (8 entries, each one has 4 8bit fields) |
| */ |
| #define AR5K_RATE2DB_BASE 0x87c0 |
| #define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2)) |
| |
| /* |
| * db -> Rate mapping table |
| * (8 entries, each one has 4 8bit fields) |
| */ |
| #define AR5K_DB2RATE_BASE 0x87e0 |
| #define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2)) |
| |
| /*===5212 end===*/ |
| |
| /* |
| * Key table (WEP) register |
| */ |
| #define AR5K_KEYTABLE_0_5210 0x9000 |
| #define AR5K_KEYTABLE_0_5211 0x8800 |
| #define AR5K_KEYTABLE_5210(_n) (AR5K_KEYTABLE_0_5210 + ((_n) << 5)) |
| #define AR5K_KEYTABLE_5211(_n) (AR5K_KEYTABLE_0_5211 + ((_n) << 5)) |
| #define AR5K_KEYTABLE(_n) (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_KEYTABLE_5210(_n) : AR5K_KEYTABLE_5211(_n)) |
| #define AR5K_KEYTABLE_OFF(_n, x) (AR5K_KEYTABLE(_n) + (x << 2)) |
| #define AR5K_KEYTABLE_TYPE(_n) AR5K_KEYTABLE_OFF(_n, 5) |
| #define AR5K_KEYTABLE_TYPE_40 0x00000000 |
| #define AR5K_KEYTABLE_TYPE_104 0x00000001 |
| #define AR5K_KEYTABLE_TYPE_128 0x00000003 |
| #define AR5K_KEYTABLE_TYPE_TKIP 0x00000004 /* [5212+] */ |
| #define AR5K_KEYTABLE_TYPE_AES 0x00000005 /* [5211+] */ |
| #define AR5K_KEYTABLE_TYPE_CCM 0x00000006 /* [5212+] */ |
| #define AR5K_KEYTABLE_TYPE_NULL 0x00000007 /* [5211+] */ |
| #define AR5K_KEYTABLE_ANTENNA 0x00000008 /* [5212+] */ |
| #define AR5K_KEYTABLE_MAC0(_n) AR5K_KEYTABLE_OFF(_n, 6) |
| #define AR5K_KEYTABLE_MAC1(_n) AR5K_KEYTABLE_OFF(_n, 7) |
| #define AR5K_KEYTABLE_VALID 0x00008000 |
| |
| /* If key type is TKIP and MIC is enabled |
| * MIC key goes in offset entry + 64 */ |
| #define AR5K_KEYTABLE_MIC_OFFSET 64 |
| |
| /* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit |
| * WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit |
| * WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit |
| * |
| * Some vendors have introduced bigger WEP keys to address |
| * security vulnerabilities in WEP. This includes: |
| * |
| * WEP 232-bit = 232-bit entered key + 24 bit IV = 256-bit |
| * |
| * We can expand this if we find ar5k Atheros cards with a larger |
| * key table size. |
| */ |
| #define AR5K_KEYTABLE_SIZE_5210 64 |
| #define AR5K_KEYTABLE_SIZE_5211 128 |
| #define AR5K_KEYTABLE_SIZE (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211) |
| |
| |
| /*===PHY REGISTERS===*/ |
| |
| /* |
| * PHY registers start |
| */ |
| #define AR5K_PHY_BASE 0x9800 |
| #define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2)) |
| |
| /* |
| * TST_2 (Misc config parameters) |
| */ |
| #define AR5K_PHY_TST2 0x9800 /* Register Address */ |
| #define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ |
| #define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ |
| #define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ |
| #define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ |
| #define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ |
| #define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ |
| #define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ |
| #define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch ?) */ |
| #define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */ |
| #define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */ |
| #define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */ |
| #define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */ |
| #define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */ |
| #define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */ |
| #define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */ |
| #define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */ |
| #define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */ |
| #define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */ |
| |
| /* |
| * PHY frame control register [5110] /turbo mode register [5111+] |
| * |
| * There is another frame control register for [5111+] |
| * at address 0x9944 (see below) but the 2 first flags |
| * are common here between 5110 frame control register |
| * and [5111+] turbo mode register, so this also works as |
| * a "turbo mode register" for 5110. We treat this one as |
| * a frame control register for 5110 below. |
| */ |
| #define AR5K_PHY_TURBO 0x9804 /* Register Address */ |
| #define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ |
| #define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */ |
| #define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */ |
| |
| /* |
| * PHY agility command register |
| * (aka TST_1) |
| */ |
| #define AR5K_PHY_AGC 0x9808 /* Register Address */ |
| #define AR5K_PHY_TST1 0x9808 |
| #define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ |
| #define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ |
| #define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */ |
| #define AR5K_PHY_TST1_TXSRC_SRC_S 1 |
| #define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */ |
| #define AR5K_PHY_TST1_TXSRC_ALT_S 7 |
| |
| |
| /* |
| * PHY timing register 3 [5112+] |
| */ |
| #define AR5K_PHY_TIMING_3 0x9814 |
| #define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000 |
| #define AR5K_PHY_TIMING_3_DSC_MAN_S 17 |
| #define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000 |
| #define AR5K_PHY_TIMING_3_DSC_EXP_S 13 |
| |
| /* |
| * PHY chip revision register |
| */ |
| #define AR5K_PHY_CHIP_ID 0x9818 |
| |
| /* |
| * PHY activation register |
| */ |
| #define AR5K_PHY_ACT 0x981c /* Register Address */ |
| #define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */ |
| #define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */ |
| |
| /* |
| * PHY RF control registers |
| */ |
| #define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ |
| #define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */ |
| #define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0 |
| |
| #define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ |
| #define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000ff00 /* TX end to XLNA on */ |
| #define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 8 |
| |
| #define AR5K_PHY_ADC_CTL 0x982c |
| #define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003 |
| #define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0 |
| #define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000 |
| #define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000 |
| #define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000 |
| #define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000 |
| #define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16 |
| |
| #define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ |
| #define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ |
| #define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */ |
| #define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */ |
| #define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */ |
| |
| /* |
| * Pre-Amplifier control register |
| * (XPA -> external pre-amplifier) |
| */ |
| #define AR5K_PHY_PA_CTL 0x9838 /* Register Address */ |
| #define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */ |
| #define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */ |
| #define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */ |
| #define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */ |
| |
| /* |
| * PHY settling register |
| */ |
| #define AR5K_PHY_SETTLING 0x9844 /* Register Address */ |
| #define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */ |
| #define AR5K_PHY_SETTLING_AGC_S 0 |
| #define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settling time */ |
| #define AR5K_PHY_SETTLING_SWITCH_S 7 |
| |
| /* |
| * PHY Gain registers |
| */ |
| #define AR5K_PHY_GAIN 0x9848 /* Register Address */ |
| #define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */ |
| #define AR5K_PHY_GAIN_TXRX_ATTEN_S 12 |
| #define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000 |
| #define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18 |
| |
| #define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ |
| #define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ |
| |
| /* |
| * Desired ADC/PGA size register |
| * (for more infos read ANI patent) |
| */ |
| #define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ |
| #define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */ |
| #define AR5K_PHY_DESIRED_SIZE_ADC_S 0 |
| #define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */ |
| #define AR5K_PHY_DESIRED_SIZE_PGA_S 8 |
| #define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */ |
| #define AR5K_PHY_DESIRED_SIZE_TOT_S 20 |
| |
| /* |
| * PHY signal register |
| * (for more infos read ANI patent) |
| */ |
| #define AR5K_PHY_SIG 0x9858 /* Register Address */ |
| #define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */ |
| #define AR5K_PHY_SIG_FIRSTEP_S 12 |
| #define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */ |
| #define AR5K_PHY_SIG_FIRPWR_S 18 |
| |
| /* |
| * PHY coarse agility control register |
| * (for more infos read ANI patent) |
| */ |
| #define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ |
| #define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */ |
| #define AR5K_PHY_AGCCOARSE_LO_S 7 |
| #define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */ |
| #define AR5K_PHY_AGCCOARSE_HI_S 15 |
| |
| /* |
| * PHY agility control register |
| */ |
| #define AR5K_PHY_AGCCTL 0x9860 /* Register address */ |
| #define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ |
| #define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ |
| #define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */ |
| #define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ |
| #define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */ |
| #define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ |
| |
| /* |
| * PHY noise floor status register (CCA = Clear Channel Assessment) |
| */ |
| #define AR5K_PHY_NF 0x9864 /* Register address */ |
| #define AR5K_PHY_NF_M 0x000001ff /* Noise floor, written to hardware in 1/2 dBm units */ |
| #define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) |
| #define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */ |
| #define AR5K_PHY_NF_THRESH62_S 12 |
| #define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* Minimum measured noise level, read from hardware in 1 dBm units */ |
| #define AR5K_PHY_NF_MINCCA_PWR_S 19 |
| |
| /* |
| * PHY ADC saturation register [5110] |
| */ |
| #define AR5K_PHY_ADCSAT 0x9868 |
| #define AR5K_PHY_ADCSAT_ICNT 0x0001f800 |
| #define AR5K_PHY_ADCSAT_ICNT_S 11 |
| #define AR5K_PHY_ADCSAT_THR 0x000007e0 |
| #define AR5K_PHY_ADCSAT_THR_S 5 |
| |
| /* |
| * PHY Weak ofdm signal detection threshold registers (ANI) [5212+] |
| */ |
| |
| /* High thresholds */ |
| #define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868 |
| #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f |
| #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0 |
| #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000 |
| #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17 |
| #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000 |
| #define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 |
| |
| /* Low thresholds */ |
| #define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c |
| #define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 |
| #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 |
| #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 |
| #define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000 |
| #define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14 |
| #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000 |
| #define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21 |
| |
| |
| /* |
| * PHY sleep registers [5112+] |
| */ |
| #define AR5K_PHY_SCR 0x9870 |
| |
| #define AR5K_PHY_SLMT 0x9874 |
| #define AR5K_PHY_SLMT_32MHZ 0x0000007f |
| |
| #define AR5K_PHY_SCAL 0x9878 |
| #define AR5K_PHY_SCAL_32MHZ 0x0000000e |
| #define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a |
| #define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032 |
| |
| /* |
| * PHY PLL (Phase Locked Loop) control register |
| */ |
| #define AR5K_PHY_PLL 0x987c |
| #define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */ |
| /* 40MHz -> 5GHz band */ |
| #define AR5K_PHY_PLL_40MHZ_5211 0x00000018 |
| #define AR5K_PHY_PLL_40MHZ_5212 0x000000aa |
| #define AR5K_PHY_PLL_40MHZ_5413 0x00000004 |
| #define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \ |
| AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212) |
| /* 44MHz -> 2.4GHz band */ |
| #define AR5K_PHY_PLL_44MHZ_5211 0x00000019 |
| #define AR5K_PHY_PLL_44MHZ_5212 0x000000ab |
| #define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \ |
| AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) |
| |
| #define AR5K_PHY_PLL_RF5111 0x00000000 |
| #define AR5K_PHY_PLL_RF5112 0x00000040 |
| #define AR5K_PHY_PLL_HALF_RATE 0x00000100 |
| #define AR5K_PHY_PLL_QUARTER_RATE 0x00000200 |
| |
| /* |
| * RF Buffer register |
| * |
| * It's obvious from the code that 0x989c is the buffer register but |
| * for the other special registers that we write to after sending each |
| * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers |
| * for now. It's interesting that they are also used for some other operations. |
| */ |
| |
| #define AR5K_RF_BUFFER 0x989c |
| #define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */ |
| #define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */ |
| #define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */ |
| |
| #define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */ |
| /* Channel set on 5111 */ |
| /* Used to read radio revision*/ |
| |
| #define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */ |
| /* Bank 0,1,2,6 on 5111 */ |
| /* Bank 1 on 5112 */ |
| /* Used during activation on 5111 */ |
| |
| #define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */ |
| /* Used during activation on 5111 */ |
| /* Channel on 5112 */ |
| /* Bank 6 on 5112 */ |
| |
| #define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */ |
| |
| /* |
| * PHY RF stage register [5210] |
| */ |
| #define AR5K_PHY_RFSTG 0x98d4 |
| #define AR5K_PHY_RFSTG_DISABLE 0x00000021 |
| |
| /* |
| * BIN masks (?) |
| */ |
| #define AR5K_PHY_BIN_MASK_1 0x9900 |
| #define AR5K_PHY_BIN_MASK_2 0x9904 |
| #define AR5K_PHY_BIN_MASK_3 0x9908 |
| |
| #define AR5K_PHY_BIN_MASK_CTL 0x990c |
| #define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff |
| #define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0 |
| #define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000 |
| #define AR5K_PHY_BIN_MASK_CTL_RATE_S 24 |
| |
| /* |
| * PHY Antenna control register |
| */ |
| #define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */ |
| #define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */ |
| #define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */ |
| #define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */ |
| #define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x000003f0 /* Switch table idle (?) */ |
| #define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4 |
| |
| /* |
| * PHY receiver delay register [5111+] |
| */ |
| #define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */ |
| #define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */ |
| |
| /* |
| * PHY max rx length register (?) [5111] |
| */ |
| #define AR5K_PHY_MAX_RX_LEN 0x991c |
| |
| /* |
| * PHY timing register 4 |
| * I(nphase)/Q(adrature) calibration register [5111+] |
| */ |
| #define AR5K_PHY_IQ 0x9920 /* Register Address */ |
| #define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */ |
| #define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */ |
| #define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5 |
| #define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */ |
| #define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */ |
| #define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12 |
| #define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */ |
| #define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */ |
| #define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */ |
| #define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */ |
| #define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */ |
| #define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */ |
| #define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */ |
| |
| /* |
| * PHY timing register 5 |
| * OFDM Self-correlator Cyclic RSSI threshold params |
| * (Check out bb_cycpwr_thr1 on ANI patent) |
| */ |
| #define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ |
| #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ |
| #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ |
| #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 1 |
| #define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ |
| #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ |
| #define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ |
| #define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */ |
| |
| /* |
| * PHY-only warm reset register |
| */ |
| #define AR5K_PHY_WARM_RESET 0x9928 |
| |
| /* |
| * PHY-only control register |
| */ |
| #define AR5K_PHY_CTL 0x992c /* Register Address */ |
| #define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */ |
| #define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */ |
| #define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */ |
| #define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */ |
| #define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */ |
| #define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */ |
| #define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */ |
| #define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */ |
| |
| /* |
| * PHY PAPD probe register [5111+] |
| */ |
| #define AR5K_PHY_PAPD_PROBE 0x9930 |
| #define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001 |
| #define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002 |
| #define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040 |
| #define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00 |
| #define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9 |
| #define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000 |
| #define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000 |
| #define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */ |
| #define AR5K_PHY_PAPD_PROBE_TYPE_S 23 |
| #define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0 |
| #define AR5K_PHY_PAPD_PROBE_TYPE_XR 1 |
| #define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2 |
| #define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000 |
| #define AR5K_PHY_PAPD_PROBE_GAINF_S 25 |
| #define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */ |
| #define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */ |
| |
| /* |
| * PHY TX rate power registers [5112+] |
| */ |
| #define AR5K_PHY_TXPOWER_RATE1 0x9934 |
| #define AR5K_PHY_TXPOWER_RATE2 0x9938 |
| #define AR5K_PHY_TXPOWER_RATE_MAX 0x993c |
| #define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040 |
| #define AR5K_PHY_TXPOWER_RATE3 0xa234 |
| #define AR5K_PHY_TXPOWER_RATE4 0xa238 |
| |
| /* |
| * PHY frame control register [5111+] |
| */ |
| #define AR5K_PHY_FRAME_CTL_5210 0x9804 |
| #define AR5K_PHY_FRAME_CTL_5211 0x9944 |
| #define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ |
| AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) |
| /*---[5111+]---*/ |
| #define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ |
| #define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 |
| #define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ |
| #define AR5K_PHY_FRAME_CTL_EMU 0x80000000 |
| #define AR5K_PHY_FRAME_CTL_EMU_S 31 |
| /*---[5110/5111]---*/ |
| #define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ |
| #define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ |
| #define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */ |
| #define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ |
| #define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 |
| #define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ |
| #define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ |
| AR5K_PHY_FRAME_CTL_TXURN_ERR | \ |
| AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ |
| AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ |
| AR5K_PHY_FRAME_CTL_PARITY_ERR | \ |
| AR5K_PHY_FRAME_CTL_TIMING_ERR |
| |
| /* |
| * PHY Tx Power adjustment register [5212A+] |
| */ |
| #define AR5K_PHY_TX_PWR_ADJ 0x994c |
| #define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA 0x00000fc0 |
| #define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S 6 |
| #define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX 0x00fc0000 |
| #define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S 18 |
| |
| /* |
| * PHY radar detection register [5111+] |
| */ |
| #define AR5K_PHY_RADAR 0x9954 |
| #define AR5K_PHY_RADAR_ENABLE 0x00000001 |
| #define AR5K_PHY_RADAR_DISABLE 0x00000000 |
| #define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold |
| 5-bits, units unknown {0..31} |
| (? MHz ?) */ |
| #define AR5K_PHY_RADAR_INBANDTHR_S 1 |
| |
| #define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold |
| 6-bits, dBm range {0..63} |
| in dBm units. */ |
| #define AR5K_PHY_RADAR_PRSSI_THR_S 6 |
| |
| #define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold |
| 6-bits, dBm range {0..63} |
| in dBm units. */ |
| #define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 |
| |
| #define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. |
| 6-bits, dBm range {0..63} |
| in dBm units. */ |
| #define AR5K_PHY_RADAR_RSSI_THR_S 18 |
| |
| #define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response |
| filter power out threshold. |
| 7-bits, standard power range |
| {0..127} in 1/2 dBm units. */ |
| #define AR5K_PHY_RADAR_FIRPWR_THRS 24 |
| |
| /* |
| * PHY antenna switch table registers |
| */ |
| #define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 |
| #define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 |
| |
| /* |
| * PHY Noise floor threshold |
| */ |
| #define AR5K_PHY_NFTHRES 0x9968 |
| |
| /* |
| * Sigma Delta register (?) [5213] |
| */ |
| #define AR5K_PHY_SIGMA_DELTA 0x996C |
| #define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003 |
| #define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0 |
| #define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8 |
| #define AR5K_PHY_SIGMA_DELTA_FILT2_S 3 |
| #define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00 |
| #define AR5K_PHY_SIGMA_DELTA_FILT1_S 8 |
| #define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ffe000 |
| #define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13 |
| |
| /* |
| * RF restart register [5112+] (?) |
| */ |
| #define AR5K_PHY_RESTART 0x9970 /* restart */ |
| #define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */ |
| #define AR5K_PHY_RESTART_DIV_GC_S 18 |
| |
| /* |
| * RF Bus access request register (for synth-oly channel switching) |
| */ |
| #define AR5K_PHY_RFBUS_REQ 0x997C |
| #define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 |
| |
| /* |
| * Spur mitigation masks (?) |
| */ |
| #define AR5K_PHY_TIMING_7 0x9980 |
| #define AR5K_PHY_TIMING_8 0x9984 |
| #define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff |
| #define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0 |
| |
| #define AR5K_PHY_BIN_MASK2_1 0x9988 |
| #define AR5K_PHY_BIN_MASK2_2 0x998c |
| #define AR5K_PHY_BIN_MASK2_3 0x9990 |
| |
| #define AR5K_PHY_BIN_MASK2_4 0x9994 |
| #define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff |
| #define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0 |
| |
| #define AR5K_PHY_TIMING_9 0x9998 |
| #define AR5K_PHY_TIMING_10 0x999c |
| #define AR5K_PHY_TIMING_10_PILOT_MASK_2 0x000fffff |
| #define AR5K_PHY_TIMING_10_PILOT_MASK_2_S 0 |
| |
| /* |
| * Spur mitigation control |
| */ |
| #define AR5K_PHY_TIMING_11 0x99a0 /* Register address */ |
| #define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ |
| #define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 |
| #define AR5K_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ |
| #define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S 20 |
| #define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ |
| #define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ |
| |
| /* |
| * Gain tables |
| */ |
| #define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ |
| #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) |
| #define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ |
| #define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) |
| |
| /* |
| * PHY timing IQ calibration result register [5111+] |
| */ |
| #define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ |
| #define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ |
| #define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */ |
| |
| /* |
| * PHY current RSSI register [5111+] |
| */ |
| #define AR5K_PHY_CURRENT_RSSI 0x9c1c |
| |
| /* |
| * PHY RF Bus grant register |
| */ |
| #define AR5K_PHY_RFBUS_GRANT 0x9c20 |
| #define AR5K_PHY_RFBUS_GRANT_OK 0x00000001 |
| |
| /* |
| * PHY ADC test register |
| */ |
| #define AR5K_PHY_ADC_TEST 0x9c24 |
| #define AR5K_PHY_ADC_TEST_I 0x00000001 |
| #define AR5K_PHY_ADC_TEST_Q 0x00000200 |
| |
| /* |
| * PHY DAC test register |
| */ |
| #define AR5K_PHY_DAC_TEST 0x9c28 |
| #define AR5K_PHY_DAC_TEST_I 0x00000001 |
| #define AR5K_PHY_DAC_TEST_Q 0x00000200 |
| |
| /* |
| * PHY PTAT register (?) |
| */ |
| #define AR5K_PHY_PTAT 0x9c2c |
| |
| /* |
| * PHY Illegal TX rate register [5112+] |
| */ |
| #define AR5K_PHY_BAD_TX_RATE 0x9c30 |
| |
| /* |
| * PHY SPUR Power register [5112+] |
| */ |
| #define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */ |
| #define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */ |
| #define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */ |
| #define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */ |
| |
| /* |
| * PHY Channel status register [5112+] (?) |
| */ |
| #define AR5K_PHY_CHAN_STATUS 0x9c38 |
| #define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001 |
| #define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002 |
| #define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004 |
| #define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 |
| |
| /* |
| * Heavy clip enable register |
| */ |
| #define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0 |
| |
| /* |
| * PHY clock sleep registers [5112+] |
| */ |
| #define AR5K_PHY_SCLOCK 0x99f0 |
| #define AR5K_PHY_SCLOCK_32MHZ 0x0000000c |
| #define AR5K_PHY_SDELAY 0x99f4 |
| #define AR5K_PHY_SDELAY_32MHZ 0x000000ff |
| #define AR5K_PHY_SPENDING 0x99f8 |
| |
| |
| /* |
| * PHY PAPD I (power?) table (?) |
| * (92! entries) |
| */ |
| #define AR5K_PHY_PAPD_I_BASE 0xa000 |
| #define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2)) |
| |
| /* |
| * PHY PCDAC TX power table |
| */ |
| #define AR5K_PHY_PCDAC_TXPOWER_BASE 0xa180 |
| #define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) |
| |
| /* |
| * PHY mode register [5111+] |
| */ |
| #define AR5K_PHY_MODE 0x0a200 /* Register Address */ |
| #define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */ |
| #define AR5K_PHY_MODE_MOD_OFDM 0 |
| #define AR5K_PHY_MODE_MOD_CCK 1 |
| #define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */ |
| #define AR5K_PHY_MODE_FREQ_5GHZ 0 |
| #define AR5K_PHY_MODE_FREQ_2GHZ 2 |
| #define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */ |
| #define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */ |
| #define AR5K_PHY_MODE_RAD_RF5111 0 |
| #define AR5K_PHY_MODE_RAD_RF5112 8 |
| #define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */ |
| #define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */ |
| #define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */ |
| |
| /* |
| * PHY CCK transmit control register [5111+ (?)] |
| */ |
| #define AR5K_PHY_CCKTXCTL 0xa204 |
| #define AR5K_PHY_CCKTXCTL_WORLD 0x00000000 |
| #define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010 |
| #define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001 |
| #define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004 |
| |
| /* |
| * PHY CCK Cross-correlator Barker RSSI threshold register [5212+] |
| */ |
| #define AR5K_PHY_CCK_CROSSCORR 0xa208 |
| #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000003f |
| #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 |
| |
| /* Same address is used for antenna diversity activation */ |
| #define AR5K_PHY_FAST_ANT_DIV 0xa208 |
| #define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000 |
| |
| /* |
| * PHY 2GHz gain register [5111+] |
| */ |
| #define AR5K_PHY_GAIN_2GHZ 0xa20c |
| #define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 |
| #define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18 |
| #define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c |
| |
| #define AR5K_PHY_CCK_RX_CTL_4 0xa21c |
| #define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000 |
| #define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19 |
| |
| #define AR5K_PHY_DAG_CCK_CTL 0xa228 |
| #define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200 |
| #define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00 |
| #define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10 |
| |
| #define AR5K_PHY_FAST_ADC 0xa24c |
| |
| #define AR5K_PHY_BLUETOOTH 0xa254 |
| |
| /* |
| * Transmit Power Control register |
| * [2413+] |
| */ |
| #define AR5K_PHY_TPC_RG1 0xa258 |
| #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 |
| #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 |
| #define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000 |
| #define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16 |
| #define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000 |
| #define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18 |
| #define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000 |
| #define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20 |
| |
| #define AR5K_PHY_TPC_RG5 0xa26C |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0 |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0 |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4 |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00 |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10 |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000 |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16 |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000 |
| #define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22 |
| |
| /* |
| * PHY PDADC Tx power table |
| */ |
| #define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280 |
| #define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2)) |