[SCSI] lpfc: Replace lpfc_sli_issue_iocb_wait_high_priority
Replace lpfc_sli_issue_iocb_wait_high_priority with lpfc_sli_issue_iocb_wait.
Simplify code paths, as there really wasn't a "priority"
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a8097e6..e09398d 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -839,9 +839,6 @@
spin_lock_irqsave(phba->host->host_lock, iflag);
}
else {
- if (cmdiocbp->iocb_flag & LPFC_IO_POLL)
- rc = 0;
-
spin_unlock_irqrestore(phba->host->host_lock,
iflag);
(cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
@@ -874,6 +871,7 @@
saveq->iocb.ulpContext);
}
}
+
spin_unlock_irqrestore(phba->host->host_lock, iflag);
return rc;
}
@@ -2592,84 +2590,99 @@
return errcnt;
}
-void
-lpfc_sli_wake_iocb_high_priority(struct lpfc_hba * phba,
- struct lpfc_iocbq * queue1,
- struct lpfc_iocbq * queue2)
+static void
+lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
+ struct lpfc_iocbq *cmdiocbq,
+ struct lpfc_iocbq *rspiocbq)
{
- struct lpfc_iocbq *save_iocbq = queue1->context2;
- if (save_iocbq && queue2)
- memcpy(&save_iocbq->iocb, &queue2->iocb, sizeof(queue2->iocb));
+ wait_queue_head_t *pdone_q;
+ unsigned long iflags;
- /* The waiter is looking for LPFC_IO_HIPRI bit to be set
- as a signal to wake up */
- queue1->iocb_flag |= LPFC_IO_HIPRI;
+ spin_lock_irqsave(phba->host->host_lock, iflags);
+ cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
+ if (cmdiocbq->context2 && rspiocbq)
+ memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
+ &rspiocbq->iocb, sizeof(IOCB_t));
+
+ pdone_q = cmdiocbq->context_un.wait_queue;
+ spin_unlock_irqrestore(phba->host->host_lock, iflags);
+ if (pdone_q)
+ wake_up(pdone_q);
return;
}
+/*
+ * Issue the caller's iocb and wait for its completion, but no longer than the
+ * caller's timeout. Note that iocb_flags is cleared before the
+ * lpfc_sli_issue_call since the wake routine sets a unique value and by
+ * definition this is a wait function.
+ */
int
-lpfc_sli_issue_iocb_wait_high_priority(struct lpfc_hba * phba,
- struct lpfc_sli_ring * pring,
- struct lpfc_iocbq * piocb,
- uint32_t flag,
- struct lpfc_iocbq * prspiocbq,
- uint32_t timeout)
+lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba,
+ struct lpfc_sli_ring * pring,
+ struct lpfc_iocbq * piocb,
+ struct lpfc_iocbq * prspiocbq,
+ uint32_t timeout)
{
- int j, delay_time, retval = IOCB_ERROR;
-
- /* The caller must left context1 empty. */
- if (piocb->context_un.hipri_wait_queue != 0) {
- return IOCB_ERROR;
- }
+ DECLARE_WAIT_QUEUE_HEAD(done_q);
+ long timeleft, timeout_req = 0;
+ int retval = IOCB_SUCCESS;
/*
- * If the caller has provided a response iocbq buffer, context2 must
- * be NULL or its an error.
+ * If the caller has provided a response iocbq buffer, then context2
+ * is NULL or its an error.
*/
- if (prspiocbq && piocb->context2) {
- return IOCB_ERROR;
+ if (prspiocbq) {
+ if (piocb->context2)
+ return IOCB_ERROR;
+ piocb->context2 = prspiocbq;
}
- piocb->context2 = prspiocbq;
+ piocb->iocb_cmpl = lpfc_sli_wake_iocb_wait;
+ piocb->context_un.wait_queue = &done_q;
+ piocb->iocb_flag &= ~LPFC_IO_WAKE;
- /* Setup callback routine and issue the command. */
- piocb->iocb_cmpl = lpfc_sli_wake_iocb_high_priority;
- retval = lpfc_sli_issue_iocb(phba, pring, piocb,
- flag | SLI_IOCB_HIGH_PRIORITY);
- if (retval != IOCB_SUCCESS) {
- piocb->context2 = NULL;
- return IOCB_ERROR;
- }
+ retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
+ if (retval == IOCB_SUCCESS) {
+ timeout_req = timeout * HZ;
+ spin_unlock_irq(phba->host->host_lock);
+ timeleft = wait_event_timeout(done_q,
+ piocb->iocb_flag & LPFC_IO_WAKE,
+ timeout_req);
+ spin_lock_irq(phba->host->host_lock);
- /*
- * This high-priority iocb was sent out-of-band. Poll for its
- * completion rather than wait for a signal. Note that the host_lock
- * is held by the midlayer and must be released here to allow the
- * interrupt handlers to complete the IO and signal this routine via
- * the iocb_flag.
- * Also, the delay_time is computed to be one second longer than
- * the scsi command timeout to give the FW time to abort on
- * timeout rather than the driver just giving up. Typically,
- * the midlayer does not specify a time for this command so the
- * driver is free to enforce its own timeout.
- */
-
- delay_time = ((timeout + 1) * 1000) >> 6;
- retval = IOCB_ERROR;
- spin_unlock_irq(phba->host->host_lock);
- for (j = 0; j < 64; j++) {
- msleep(delay_time);
- if (piocb->iocb_flag & LPFC_IO_HIPRI) {
- piocb->iocb_flag &= ~LPFC_IO_HIPRI;
- retval = IOCB_SUCCESS;
- break;
+ if (timeleft == 0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "%d:0329 IOCB wait timeout error - no "
+ "wake response Data x%x\n",
+ phba->brd_no, timeout);
+ retval = IOCB_TIMEDOUT;
+ } else if (!(piocb->iocb_flag & LPFC_IO_WAKE)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "%d:0330 IOCB wake NOT set, "
+ "Data x%x x%lx\n", phba->brd_no,
+ timeout, (timeleft / jiffies));
+ retval = IOCB_TIMEDOUT;
+ } else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "%d:0331 IOCB wake signaled\n",
+ phba->brd_no);
}
+ } else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "%d:0332 IOCB wait issue failed, Data x%x\n",
+ phba->brd_no, retval);
+ retval = IOCB_ERROR;
}
- spin_lock_irq(phba->host->host_lock);
- piocb->context2 = NULL;
+ if (prspiocbq)
+ piocb->context2 = NULL;
+
+ piocb->context_un.wait_queue = NULL;
+ piocb->iocb_cmpl = NULL;
return retval;
}
+
int
lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq,
uint32_t timeout)