cxgb4: Add code to dump SGE registers when hitting idma hangs
Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 944f2cb..509c976 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -1032,4 +1032,5 @@
int t4_mem_win_read_len(struct adapter *adap, u32 addr, __be32 *data, int len);
int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
u32 addr, u32 val);
+void t4_sge_decode_idma_state(struct adapter *adapter, int state);
#endif /* __CXGB4_H__ */
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index d3c2a51..fb2fe65 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2597,6 +2597,112 @@
}
/**
+ * t4_sge_decode_idma_state - decode the idma state
+ * @adap: the adapter
+ * @state: the state idma is stuck in
+ */
+void t4_sge_decode_idma_state(struct adapter *adapter, int state)
+{
+ static const char * const t4_decode[] = {
+ "IDMA_IDLE",
+ "IDMA_PUSH_MORE_CPL_FIFO",
+ "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
+ "Not used",
+ "IDMA_PHYSADDR_SEND_PCIEHDR",
+ "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
+ "IDMA_PHYSADDR_SEND_PAYLOAD",
+ "IDMA_SEND_FIFO_TO_IMSG",
+ "IDMA_FL_REQ_DATA_FL_PREP",
+ "IDMA_FL_REQ_DATA_FL",
+ "IDMA_FL_DROP",
+ "IDMA_FL_H_REQ_HEADER_FL",
+ "IDMA_FL_H_SEND_PCIEHDR",
+ "IDMA_FL_H_PUSH_CPL_FIFO",
+ "IDMA_FL_H_SEND_CPL",
+ "IDMA_FL_H_SEND_IP_HDR_FIRST",
+ "IDMA_FL_H_SEND_IP_HDR",
+ "IDMA_FL_H_REQ_NEXT_HEADER_FL",
+ "IDMA_FL_H_SEND_NEXT_PCIEHDR",
+ "IDMA_FL_H_SEND_IP_HDR_PADDING",
+ "IDMA_FL_D_SEND_PCIEHDR",
+ "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
+ "IDMA_FL_D_REQ_NEXT_DATA_FL",
+ "IDMA_FL_SEND_PCIEHDR",
+ "IDMA_FL_PUSH_CPL_FIFO",
+ "IDMA_FL_SEND_CPL",
+ "IDMA_FL_SEND_PAYLOAD_FIRST",
+ "IDMA_FL_SEND_PAYLOAD",
+ "IDMA_FL_REQ_NEXT_DATA_FL",
+ "IDMA_FL_SEND_NEXT_PCIEHDR",
+ "IDMA_FL_SEND_PADDING",
+ "IDMA_FL_SEND_COMPLETION_TO_IMSG",
+ "IDMA_FL_SEND_FIFO_TO_IMSG",
+ "IDMA_FL_REQ_DATAFL_DONE",
+ "IDMA_FL_REQ_HEADERFL_DONE",
+ };
+ static const char * const t5_decode[] = {
+ "IDMA_IDLE",
+ "IDMA_ALMOST_IDLE",
+ "IDMA_PUSH_MORE_CPL_FIFO",
+ "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
+ "IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
+ "IDMA_PHYSADDR_SEND_PCIEHDR",
+ "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
+ "IDMA_PHYSADDR_SEND_PAYLOAD",
+ "IDMA_SEND_FIFO_TO_IMSG",
+ "IDMA_FL_REQ_DATA_FL",
+ "IDMA_FL_DROP",
+ "IDMA_FL_DROP_SEND_INC",
+ "IDMA_FL_H_REQ_HEADER_FL",
+ "IDMA_FL_H_SEND_PCIEHDR",
+ "IDMA_FL_H_PUSH_CPL_FIFO",
+ "IDMA_FL_H_SEND_CPL",
+ "IDMA_FL_H_SEND_IP_HDR_FIRST",
+ "IDMA_FL_H_SEND_IP_HDR",
+ "IDMA_FL_H_REQ_NEXT_HEADER_FL",
+ "IDMA_FL_H_SEND_NEXT_PCIEHDR",
+ "IDMA_FL_H_SEND_IP_HDR_PADDING",
+ "IDMA_FL_D_SEND_PCIEHDR",
+ "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
+ "IDMA_FL_D_REQ_NEXT_DATA_FL",
+ "IDMA_FL_SEND_PCIEHDR",
+ "IDMA_FL_PUSH_CPL_FIFO",
+ "IDMA_FL_SEND_CPL",
+ "IDMA_FL_SEND_PAYLOAD_FIRST",
+ "IDMA_FL_SEND_PAYLOAD",
+ "IDMA_FL_REQ_NEXT_DATA_FL",
+ "IDMA_FL_SEND_NEXT_PCIEHDR",
+ "IDMA_FL_SEND_PADDING",
+ "IDMA_FL_SEND_COMPLETION_TO_IMSG",
+ };
+ static const u32 sge_regs[] = {
+ SGE_DEBUG_DATA_LOW_INDEX_2,
+ SGE_DEBUG_DATA_LOW_INDEX_3,
+ SGE_DEBUG_DATA_HIGH_INDEX_10,
+ };
+ const char **sge_idma_decode;
+ int sge_idma_decode_nstates;
+ int i;
+
+ if (is_t4(adapter->params.chip)) {
+ sge_idma_decode = (const char **)t4_decode;
+ sge_idma_decode_nstates = ARRAY_SIZE(t4_decode);
+ } else {
+ sge_idma_decode = (const char **)t5_decode;
+ sge_idma_decode_nstates = ARRAY_SIZE(t5_decode);
+ }
+
+ if (state < sge_idma_decode_nstates)
+ CH_WARN(adapter, "idma state %s\n", sge_idma_decode[state]);
+ else
+ CH_WARN(adapter, "idma state %d unknown\n", state);
+
+ for (i = 0; i < ARRAY_SIZE(sge_regs); i++)
+ CH_WARN(adapter, "SGE register %#x value %#x\n",
+ sge_regs[i], t4_read_reg(adapter, sge_regs[i]));
+}
+
+/**
* t4_fw_hello - establish communication with FW
* @adap: the adapter
* @mbox: mailbox to use for the FW command
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
index 4082522..33cf9ef 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
@@ -278,6 +278,9 @@
#define SGE_DEBUG_INDEX 0x10cc
#define SGE_DEBUG_DATA_HIGH 0x10d0
#define SGE_DEBUG_DATA_LOW 0x10d4
+#define SGE_DEBUG_DATA_LOW_INDEX_2 0x12c8
+#define SGE_DEBUG_DATA_LOW_INDEX_3 0x12cc
+#define SGE_DEBUG_DATA_HIGH_INDEX_10 0x12a8
#define SGE_INGRESS_QUEUES_PER_PAGE_PF 0x10f4
#define S_HP_INT_THRESH 28