regulator: Clean up kerneldoc warnings
Remove kerneldoc warnings that don't relate to missing documentation,
mostly by renaming parameters in the documentation to match their
actual names.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 7ba9491..ea12c68 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -655,7 +655,7 @@
/**
* set_machine_constraints - sets regulator constraints
- * @regulator: regulator source
+ * @rdev: regulator source
*
* Allows platform initialisation code to define and constrain
* regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
@@ -730,8 +730,8 @@
/**
* set_supply - set regulator supply regulator
- * @regulator: regulator name
- * @supply: supply regulator name
+ * @rdev: regulator name
+ * @supply_rdev: supply regulator name
*
* Called by platform initialisation code to set the supply regulator for this
* regulator. This ensures that a regulators supply will also be enabled by the
@@ -758,9 +758,9 @@
/**
* set_consumer_device_supply: Bind a regulator to a symbolic supply
- * @regulator: regulator source
- * @dev: device the supply applies to
- * @supply: symbolic name for supply
+ * @rdev: regulator source
+ * @consumer_dev: device the supply applies to
+ * @supply: symbolic name for supply
*
* Allows platform initialisation code to map physical regulator
* sources to symbolic names for supplies for use by devices. Devices
@@ -1013,9 +1013,8 @@
*
* Enable the regulator output at the predefined voltage or current value.
* NOTE: the output value can be set by other drivers, boot loader or may be
- * hardwired in the regulator.
- * NOTE: calls to regulator_enable() must be balanced with calls to
- * regulator_disable().
+ * hardwired in the regulator. Calls to regulator_enable() must be balanced
+ * with calls to regulator_disable().
*/
int regulator_enable(struct regulator *regulator)
{
@@ -1074,10 +1073,10 @@
* @regulator: regulator source
*
* Disable the regulator output voltage or current.
+ *
* NOTE: this will only disable the regulator output if no other consumer
- * devices have it enabled.
- * NOTE: calls to regulator_enable() must be balanced with calls to
- * regulator_disable().
+ * devices have it enabled. Calls to regulator_enable() must be balanced with
+ * calls to regulator_disable().
*/
int regulator_disable(struct regulator *regulator)
{
@@ -1200,7 +1199,7 @@
*
* NOTE: If the regulator is shared between several devices then the lowest
* request voltage that meets the system constraints will be used.
- * NOTE: Regulator system constraints must be set for this regulator before
+ * Regulator system constraints must be set for this regulator before
* calling this function otherwise this call will fail.
*/
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
@@ -1498,7 +1497,7 @@
/**
* regulator_register_notifier - register regulator event notifier
* @regulator: regulator source
- * @notifier_block: notifier block
+ * @nb: notifier block
*
* Register notifier block to receive regulator events.
*/
@@ -1513,7 +1512,7 @@
/**
* regulator_unregister_notifier - unregister regulator event notifier
* @regulator: regulator source
- * @notifier_block: notifier block
+ * @nb: notifier block
*
* Unregister regulator event notifier block.
*/
@@ -1679,9 +1678,9 @@
/**
* regulator_notifier_call_chain - call regulator event notifier
- * @regulator: regulator source
+ * @rdev: regulator source
* @event: notifier block
- * @data:
+ * @data: callback-specific data.
*
* Called by regulator drivers to notify clients a regulator event has
* occurred. We also notify regulator clients downstream.
@@ -1808,8 +1807,9 @@
/**
* regulator_register - register regulator
- * @regulator: regulator source
- * @reg_data: private regulator data
+ * @regulator_desc: regulator to register
+ * @dev: struct device for the regulator
+ * @driver_data: private regulator data
*
* Called by regulator drivers to register a regulator.
* Returns 0 on success.
@@ -1916,7 +1916,7 @@
/**
* regulator_unregister - unregister regulator
- * @regulator: regulator source
+ * @rdev: regulator to unregister
*
* Called by regulator drivers to unregister a regulator.
*/
@@ -1971,7 +1971,7 @@
/**
* rdev_get_drvdata - get rdev regulator driver data
- * @regulator: regulator
+ * @rdev: regulator
*
* Get rdev regulator driver private data. This call can be used in the
* regulator driver context.
@@ -2008,7 +2008,7 @@
/**
* regulator_get_id - get regulator ID
- * @regulator: regulator
+ * @rdev: regulator
*/
int rdev_get_id(struct regulator_dev *rdev)
{