powerpc: Remove CONFIG_POWER4_ONLY
Remove CONFIG_POWER4_ONLY, the option is badly named and only does two
things:
- It wraps the MMU segment table code. With feature fixups there is
little downside to compiling this in.
- It uses the newer mtocrf instruction in various assembly functions.
Instead of making this a compile option just do it at runtime via
a feature fixup.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 1196c34..07b7f2a 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,5 +1,4 @@
CONFIG_PPC64=y
-CONFIG_POWER4_ONLY=y
CONFIG_ALTIVEC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 2244d37..02ac96b 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,5 +1,4 @@
CONFIG_PPC64=y
-CONFIG_POWER4_ONLY=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_EXPERIMENTAL=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index f4deb0b..840a2c2 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,5 +1,4 @@
CONFIG_PPC64=y
-CONFIG_POWER4_ONLY=y
CONFIG_ALTIVEC=y
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
index decad95..5d7fbe1 100644
--- a/arch/powerpc/include/asm/asm-compat.h
+++ b/arch/powerpc/include/asm/asm-compat.h
@@ -29,18 +29,9 @@
#define PPC_LLARX(t, a, b, eh) PPC_LDARX(t, a, b, eh)
#define PPC_STLCX stringify_in_c(stdcx.)
#define PPC_CNTLZL stringify_in_c(cntlzd)
+#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), (RS))
#define PPC_LR_STKOFF 16
#define PPC_MIN_STKFRM 112
-
-/* Move to CR, single-entry optimized version. Only available
- * on POWER4 and later.
- */
-#ifdef CONFIG_POWER4_ONLY
-#define PPC_MTOCRF stringify_in_c(mtocrf)
-#else
-#define PPC_MTOCRF stringify_in_c(mtcrf)
-#endif
-
#else /* 32-bit */
/* operations for longs and pointers */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 50f73aa..1544420 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -369,7 +369,15 @@
END_FTR_SECTION_IFCLR(CPU_FTR_601)
#endif
-
+#ifdef CONFIG_PPC64
+#define MTOCRF(FXM, RS) \
+ BEGIN_FTR_SECTION_NESTED(848); \
+ mtcrf (FXM), (RS); \
+ FTR_SECTION_ELSE_NESTED(848); \
+ mtocrf (FXM), (RS); \
+ ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848)
+#endif
+
/*
* This instruction is not implemented on the PPC 603 or 601; however, on
* the 403GCX and 405GP tlbia IS defined and tlbie is not.
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index cb705fd..e053769 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -94,12 +94,10 @@
data_access_pSeries:
HMT_MEDIUM
SET_SCRATCH0(r13)
-#ifndef CONFIG_POWER4_ONLY
BEGIN_FTR_SECTION
b data_access_check_stab
data_access_not_stab:
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
-#endif
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD,
KVMTEST, 0x300)
@@ -301,7 +299,6 @@
EXC_STD, KVMTEST, 0x200)
KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200)
-#ifndef CONFIG_POWER4_ONLY
/* moved from 0x300 */
data_access_check_stab:
GET_PACA(r13)
@@ -328,7 +325,6 @@
GET_SCRATCH0(r10)
std r10,PACA_EXSLB+EX_R13(r13)
EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD)
-#endif /* CONFIG_POWER4_ONLY */
KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300)
KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380)
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 773d38f..d73a590 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -30,7 +30,7 @@
dcbt 0,r4
beq .Lcopy_page_4K
andi. r6,r6,7
- PPC_MTOCRF 0x01,r5
+ PPC_MTOCRF(0x01,r5)
blt cr1,.Lshort_copy
/* Below we want to nop out the bne if we're on a CPU that has the
* CPU_FTR_UNALIGNED_LD_STD bit set and the CPU_FTR_CP_USE_DCBTZ bit
@@ -186,7 +186,7 @@
blr
.Ldst_unaligned:
- PPC_MTOCRF 0x01,r6 /* put #bytes to 8B bdry into cr7 */
+ PPC_MTOCRF(0x01,r6) /* put #bytes to 8B bdry into cr7 */
subf r5,r6,r5
li r7,0
cmpldi cr1,r5,16
@@ -201,7 +201,7 @@
2: bf cr7*4+1,3f
37: lwzx r0,r7,r4
83: stwx r0,r7,r3
-3: PPC_MTOCRF 0x01,r5
+3: PPC_MTOCRF(0x01,r5)
add r4,r6,r4
add r3,r6,r3
b .Ldst_aligned
diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S
index 11ce045..f4fcb0b 100644
--- a/arch/powerpc/lib/mem_64.S
+++ b/arch/powerpc/lib/mem_64.S
@@ -19,7 +19,7 @@
rlwimi r4,r4,16,0,15
cmplw cr1,r5,r0 /* do we get that far? */
rldimi r4,r4,32,0
- PPC_MTOCRF 1,r0
+ PPC_MTOCRF(1,r0)
mr r6,r3
blt cr1,8f
beq+ 3f /* if already 8-byte aligned */
@@ -49,7 +49,7 @@
bdnz 4b
5: srwi. r0,r5,3
clrlwi r5,r5,29
- PPC_MTOCRF 1,r0
+ PPC_MTOCRF(1,r0)
beq 8f
bf 29,6f
std r4,0(r6)
@@ -65,7 +65,7 @@
std r4,0(r6)
addi r6,r6,8
8: cmpwi r5,0
- PPC_MTOCRF 1,r5
+ PPC_MTOCRF(1,r5)
beqlr+
bf 29,9f
stw r4,0(r6)
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index e178922..82fea39 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -12,7 +12,7 @@
.align 7
_GLOBAL(memcpy)
std r3,48(r1) /* save destination pointer for return value */
- PPC_MTOCRF 0x01,r5
+ PPC_MTOCRF(0x01,r5)
cmpldi cr1,r5,16
neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry
andi. r6,r6,7
@@ -154,7 +154,7 @@
blr
.Ldst_unaligned:
- PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7
+ PPC_MTOCRF(0x01,r6) # put #bytes to 8B bdry into cr7
subf r5,r6,r5
li r7,0
cmpldi cr1,r5,16
@@ -169,7 +169,7 @@
2: bf cr7*4+1,3f
lwzx r0,r7,r4
stwx r0,r7,r3
-3: PPC_MTOCRF 0x01,r5
+3: PPC_MTOCRF(0x01,r5)
add r4,r6,r4
add r3,r6,r3
b .Ldst_aligned
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 425db18..52e70f9 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -86,15 +86,6 @@
def_bool y
depends on PPC_BOOK3E_64
-config POWER4_ONLY
- bool "Optimize for POWER4"
- depends on PPC64 && PPC_BOOK3S
- default n
- ---help---
- Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
- The resulting binary will not work on POWER3 or RS64 processors
- when compiled with binutils 2.15 or later.
-
config 6xx
def_bool y
depends on PPC32 && PPC_BOOK3S