| /* |
| * linux/arch/arm/mach-ebsa110/isamem.c |
| * |
| * Copyright (C) 2001 Russell King |
| * |
| * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities" |
| * in the way it handles accesses to odd IO ports on 16-bit devices. These |
| * devices have their D0-D15 lines connected to the processors D0-D15 lines. |
| * Since they expect all byte IO operations to be performed on D0-D7, and the |
| * StrongARM expects to transfer the byte to these odd addresses on D8-D15, |
| * we must use a trick to get the required behaviour. |
| * |
| * The trick employed here is to use long word stores to odd address -1. The |
| * glue logic picks this up as a "trick" access, and asserts the LSB of the |
| * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the |
| * StrongARM transfers its data on D0-D7 as expected. |
| * |
| * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller |
| * wiring was screwed in such a way that it had limited memory space access. |
| * Luckily, the work-around for this is not too horrible. See |
| * __isamem_convert_addr for the details. |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/io.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/page.h> |
| |
| static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr) |
| { |
| u32 ret, a = (u32 __force) addr; |
| |
| /* |
| * The PCMCIA controller is wired up as follows: |
| * +---------+---------+---------+---------+---------+---------+ |
| * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | | |
| * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 | |
| * +---------+---------+---------+---------+---------+---------+ |
| * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | | |
| * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x | |
| * +---------+---------+---------+---------+---------+---------+ |
| * |
| * This means that we can access PCMCIA regions as follows: |
| * 0x*10000 -> 0x*1ffff |
| * 0x*70000 -> 0x*7ffff |
| * 0x*90000 -> 0x*9ffff |
| * 0x*f0000 -> 0x*fffff |
| */ |
| ret = (a & 0xf803fe) << 1; |
| ret |= (a & 0x03fc00) << 2; |
| |
| ret += 0xe8000000; |
| |
| if ((a & 0x20000) == (a & 0x40000) >> 1) |
| return (void __iomem *)ret; |
| |
| BUG(); |
| return NULL; |
| } |
| |
| /* |
| * read[bwl] and write[bwl] |
| */ |
| u8 __readb(const volatile void __iomem *addr) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| u32 ret; |
| |
| if ((unsigned long)addr & 1) |
| ret = __raw_readl(a); |
| else |
| ret = __raw_readb(a); |
| return ret; |
| } |
| |
| u16 __readw(const volatile void __iomem *addr) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| |
| if ((unsigned long)addr & 1) |
| BUG(); |
| |
| return __raw_readw(a); |
| } |
| |
| u32 __readl(const volatile void __iomem *addr) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| u32 ret; |
| |
| if ((unsigned long)addr & 3) |
| BUG(); |
| |
| ret = __raw_readw(a); |
| ret |= __raw_readw(a + 4) << 16; |
| return ret; |
| } |
| |
| EXPORT_SYMBOL(__readb); |
| EXPORT_SYMBOL(__readw); |
| EXPORT_SYMBOL(__readl); |
| |
| void readsw(const void __iomem *addr, void *data, int len) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| |
| BUG_ON((unsigned long)addr & 1); |
| |
| __raw_readsw(a, data, len); |
| } |
| EXPORT_SYMBOL(readsw); |
| |
| void readsl(const void __iomem *addr, void *data, int len) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| |
| BUG_ON((unsigned long)addr & 3); |
| |
| __raw_readsl(a, data, len); |
| } |
| EXPORT_SYMBOL(readsl); |
| |
| void __writeb(u8 val, void __iomem *addr) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| |
| if ((unsigned long)addr & 1) |
| __raw_writel(val, a); |
| else |
| __raw_writeb(val, a); |
| } |
| |
| void __writew(u16 val, void __iomem *addr) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| |
| if ((unsigned long)addr & 1) |
| BUG(); |
| |
| __raw_writew(val, a); |
| } |
| |
| void __writel(u32 val, void __iomem *addr) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| |
| if ((unsigned long)addr & 3) |
| BUG(); |
| |
| __raw_writew(val, a); |
| __raw_writew(val >> 16, a + 4); |
| } |
| |
| EXPORT_SYMBOL(__writeb); |
| EXPORT_SYMBOL(__writew); |
| EXPORT_SYMBOL(__writel); |
| |
| void writesw(void __iomem *addr, const void *data, int len) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| |
| BUG_ON((unsigned long)addr & 1); |
| |
| __raw_writesw(a, data, len); |
| } |
| EXPORT_SYMBOL(writesw); |
| |
| void writesl(void __iomem *addr, const void *data, int len) |
| { |
| void __iomem *a = __isamem_convert_addr(addr); |
| |
| BUG_ON((unsigned long)addr & 3); |
| |
| __raw_writesl(a, data, len); |
| } |
| EXPORT_SYMBOL(writesl); |
| |
| /* |
| * The EBSA110 has a weird "ISA IO" region: |
| * |
| * Region 0 (addr = 0xf0000000 + io << 2) |
| * -------------------------------------------------------- |
| * Physical region IO region |
| * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 |
| * f0000e60 - f0000e64 398 - 399 |
| * f0000de0 - f0000dfc 378 - 37f lp0 |
| * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 |
| * |
| * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) |
| * -------------------------------------------------------- |
| * Physical region IO region |
| * f00014f1 a79 pnp write data |
| * f00007c0 - f00007c1 3e0 - 3e1 pcmcia |
| * f00004f1 279 pnp address |
| * f0000440 - f000046c 220 - 236 eth0 |
| * f0000405 203 pnp read data |
| */ |
| #define SUPERIO_PORT(p) \ |
| (((p) >> 3) == (0x3f8 >> 3) || \ |
| ((p) >> 3) == (0x2f8 >> 3) || \ |
| ((p) >> 3) == (0x378 >> 3)) |
| |
| /* |
| * We're addressing an 8 or 16-bit peripheral which tranfers |
| * odd addresses on the low ISA byte lane. |
| */ |
| u8 __inb8(unsigned int port) |
| { |
| u32 ret; |
| |
| /* |
| * The SuperIO registers use sane addressing techniques... |
| */ |
| if (SUPERIO_PORT(port)) |
| ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2)); |
| else { |
| void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); |
| |
| /* |
| * Shame nothing else does |
| */ |
| if (port & 1) |
| ret = __raw_readl(a); |
| else |
| ret = __raw_readb(a); |
| } |
| return ret; |
| } |
| |
| /* |
| * We're addressing a 16-bit peripheral which transfers odd |
| * addresses on the high ISA byte lane. |
| */ |
| u8 __inb16(unsigned int port) |
| { |
| unsigned int offset; |
| |
| /* |
| * The SuperIO registers use sane addressing techniques... |
| */ |
| if (SUPERIO_PORT(port)) |
| offset = port << 2; |
| else |
| offset = (port & ~1) << 1 | (port & 1); |
| |
| return __raw_readb((void __iomem *)ISAIO_BASE + offset); |
| } |
| |
| u16 __inw(unsigned int port) |
| { |
| unsigned int offset; |
| |
| /* |
| * The SuperIO registers use sane addressing techniques... |
| */ |
| if (SUPERIO_PORT(port)) |
| offset = port << 2; |
| else { |
| offset = port << 1; |
| BUG_ON(port & 1); |
| } |
| return __raw_readw((void __iomem *)ISAIO_BASE + offset); |
| } |
| |
| /* |
| * Fake a 32-bit read with two 16-bit reads. Needed for 3c589. |
| */ |
| u32 __inl(unsigned int port) |
| { |
| void __iomem *a; |
| |
| if (SUPERIO_PORT(port) || port & 3) |
| BUG(); |
| |
| a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); |
| |
| return __raw_readw(a) | __raw_readw(a + 4) << 16; |
| } |
| |
| EXPORT_SYMBOL(__inb8); |
| EXPORT_SYMBOL(__inb16); |
| EXPORT_SYMBOL(__inw); |
| EXPORT_SYMBOL(__inl); |
| |
| void __outb8(u8 val, unsigned int port) |
| { |
| /* |
| * The SuperIO registers use sane addressing techniques... |
| */ |
| if (SUPERIO_PORT(port)) |
| __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2)); |
| else { |
| void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1); |
| |
| /* |
| * Shame nothing else does |
| */ |
| if (port & 1) |
| __raw_writel(val, a); |
| else |
| __raw_writeb(val, a); |
| } |
| } |
| |
| void __outb16(u8 val, unsigned int port) |
| { |
| unsigned int offset; |
| |
| /* |
| * The SuperIO registers use sane addressing techniques... |
| */ |
| if (SUPERIO_PORT(port)) |
| offset = port << 2; |
| else |
| offset = (port & ~1) << 1 | (port & 1); |
| |
| __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset); |
| } |
| |
| void __outw(u16 val, unsigned int port) |
| { |
| unsigned int offset; |
| |
| /* |
| * The SuperIO registers use sane addressing techniques... |
| */ |
| if (SUPERIO_PORT(port)) |
| offset = port << 2; |
| else { |
| offset = port << 1; |
| BUG_ON(port & 1); |
| } |
| __raw_writew(val, (void __iomem *)ISAIO_BASE + offset); |
| } |
| |
| void __outl(u32 val, unsigned int port) |
| { |
| BUG(); |
| } |
| |
| EXPORT_SYMBOL(__outb8); |
| EXPORT_SYMBOL(__outb16); |
| EXPORT_SYMBOL(__outw); |
| EXPORT_SYMBOL(__outl); |
| |
| void outsb(unsigned int port, const void *from, int len) |
| { |
| u32 off; |
| |
| if (SUPERIO_PORT(port)) |
| off = port << 2; |
| else { |
| off = (port & ~1) << 1; |
| if (port & 1) |
| BUG(); |
| } |
| |
| __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len); |
| } |
| |
| void insb(unsigned int port, void *from, int len) |
| { |
| u32 off; |
| |
| if (SUPERIO_PORT(port)) |
| off = port << 2; |
| else { |
| off = (port & ~1) << 1; |
| if (port & 1) |
| BUG(); |
| } |
| |
| __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len); |
| } |
| |
| EXPORT_SYMBOL(outsb); |
| EXPORT_SYMBOL(insb); |
| |
| void outsw(unsigned int port, const void *from, int len) |
| { |
| u32 off; |
| |
| if (SUPERIO_PORT(port)) |
| off = port << 2; |
| else { |
| off = (port & ~1) << 1; |
| if (port & 1) |
| BUG(); |
| } |
| |
| __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len); |
| } |
| |
| void insw(unsigned int port, void *from, int len) |
| { |
| u32 off; |
| |
| if (SUPERIO_PORT(port)) |
| off = port << 2; |
| else { |
| off = (port & ~1) << 1; |
| if (port & 1) |
| BUG(); |
| } |
| |
| __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len); |
| } |
| |
| EXPORT_SYMBOL(outsw); |
| EXPORT_SYMBOL(insw); |
| |
| /* |
| * We implement these as 16-bit insw/outsw, mainly for |
| * 3c589 cards. |
| */ |
| void outsl(unsigned int port, const void *from, int len) |
| { |
| u32 off = port << 1; |
| |
| if (SUPERIO_PORT(port) || port & 3) |
| BUG(); |
| |
| __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1); |
| } |
| |
| void insl(unsigned int port, void *from, int len) |
| { |
| u32 off = port << 1; |
| |
| if (SUPERIO_PORT(port) || port & 3) |
| BUG(); |
| |
| __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1); |
| } |
| |
| EXPORT_SYMBOL(outsl); |
| EXPORT_SYMBOL(insl); |