tg3: Fix 57765 EEE support
EEE support in the 57765 internal phy will not enable after a phy reset
unless it sees that EEE is supported in the MAC. This patch moves the
code that programs the CPMU EEE registers to a place before the phy
reset.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 1e7a135..e4efb52 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7809,6 +7809,22 @@
if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE)
tg3_abort_hw(tp, 1);
+ /* Enable MAC control of LPI */
+ if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
+ tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL,
+ TG3_CPMU_EEE_LNKIDL_PCIE_NL0 |
+ TG3_CPMU_EEE_LNKIDL_UART_IDL);
+
+ tw32_f(TG3_CPMU_EEE_CTRL,
+ TG3_CPMU_EEE_CTRL_EXIT_20_1_US);
+
+ tw32_f(TG3_CPMU_EEE_MODE,
+ TG3_CPMU_EEEMD_ERLY_L1_XIT_DET |
+ TG3_CPMU_EEEMD_LPI_IN_TX |
+ TG3_CPMU_EEEMD_LPI_IN_RX |
+ TG3_CPMU_EEEMD_EEE_ENABLE);
+ }
+
if (reset_phy)
tg3_phy_reset(tp);
@@ -7890,22 +7906,6 @@
tw32(TG3_CPMU_LSPD_10MB_CLK, val);
}
- /* Enable MAC control of LPI */
- if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
- tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL,
- TG3_CPMU_EEE_LNKIDL_PCIE_NL0 |
- TG3_CPMU_EEE_LNKIDL_UART_IDL);
-
- tw32_f(TG3_CPMU_EEE_CTRL,
- TG3_CPMU_EEE_CTRL_EXIT_20_1_US);
-
- tw32_f(TG3_CPMU_EEE_MODE,
- TG3_CPMU_EEEMD_ERLY_L1_XIT_DET |
- TG3_CPMU_EEEMD_LPI_IN_TX |
- TG3_CPMU_EEEMD_LPI_IN_RX |
- TG3_CPMU_EEEMD_EEE_ENABLE);
- }
-
/* This works around an issue with Athlon chipsets on
* B3 tigon3 silicon. This bit has no effect on any
* other revision. But do not set this on PCI Express